All supported versions of QEMU include the query-cpus-fast QMP command.
In preparation for dropping support for the old "query-cpus" commands,
convert the JSON output for PPC tests to the new format, and drop the
"halted" field from the expected output as it is not available anymore.
The CPU properties were obtained from the query-hotpluggable-cpus output
in tests/qemumonitorjsondata. CPU, thread_id, and qom_path are renamed
respectively to cpu-index, qom-path and thread-id, while nip and halted
are removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All supported versions of QEMU include the query-cpus-fast QMP command.
In preparation for dropping support for the old "query-cpus" commands,
remove the "-fast" suffix from both x86-full-fast and s390-fast.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All supported versions of QEMU include the query-cpus-fast QMP command.
In preparation for dropping support for the old "query-cpus" commands,
remove the query-cpus version of the x86-full test.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Also map it to an ethernet without connectionType and networkName.
https://bugzilla.redhat.com/show_bug.cgi?id=1988211
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch maps /domain/cpu/maxphysaddr into -cpu parameters:
- <maxphysaddr mode='passthrough'/> becomes host-phys-bits=on
- <maxphysaddr mode='emualte' bits='42'/> becomes phys-bits=42
Passthrough mode can only be used if the chosen CPU model is
'host-passthrough'. Also validate that an explicitly specified
bits value does not exceed the physical address bits on the host.
The feature is available since QEMU 2.7.0.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces the
<maxphysaddr mode='passthrough'/>
<maxphysaddr mode='emulate' bits='42'/>
sub element of /domain/cpu, which allows specifying the guest virtual CPU
address size. This can be useful if the guest needs to have a large amount
of memory.
If mode='passthrough', the virtual CPU will have the same number of address
bits as the host. If mode='emulate', the mandatory bits attribute specifies
the number of address bits.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have all the machinery needed, we can introduce two
simple test cases:
1) only TPM 1.2 is supported, but TPM 2.0 was requested in domain XML,
2) only TPM 2.0 is supported, but TPM 1.2 was requested in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Because of v8.5.0-rc1~25 we are already faking TPM support for
domaincaps. Might as well fake supported TPM versions.
The swtpm binary supports both TPM versions since its first
release, but pretend it isn't the case. For QEMU-5.2 and older
pretend only TPM-1.2 is available, QEMU-6.* has both TPM-1.2 and
TPM-2.0 and QEMU-7.0 and newer has only TPM-2.0 available.
This way, domaincaps are more dispersed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
All callers now pass false for 'retry' we are guaranteed to have a
monitor socket present. This means that the retry code can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The 'retry' argument makes the monitor connection opening re-try the
connection in case the monitor socket doesn't exist or isn't properly
listening. In case of the test code this can't happen because the socket
is created and made listening in 'qemuMonitorCommonTestNew' which is
called prior to calling 'qemuMonitorOpen'.
We can thus avoit the code which attempts retries in monitor connection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The 'timeout' argument is used by 'qemuMonitorOpenUnix' only when the
'retry' argument is true. The callers of 'qemuMonitorOpen' only pass '0'
for timeout when they call it with 'retry' true and use other values
when 'retry' is false and thus ignored.
This means we can remove the argument and simply have it set to the
default value of QEMU_DEFAULT_MONITOR_WAIT.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In a recent commit of v8.5.0-85-g430ab88ab1 I've made domaincaps
XML report supported TPM versions. This was done by calling
virTPMSwtpmSetupCapsGet(). But this function isn't mocked and
thus domaincapstest calls the real implementation, which tries to
execute swtpm_setup binary. This fails, because
virFindFileInPath() is mocked in such way that it returns NULL
for anything else than qemu-*.
Anyway, while the real binary is not executed after all, we
should mock the function which tries to execute it so that
predictable result is returned.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The qemuBuildMachineCommandLine() function is needlessly long.
Separate out parts that generate memory related arguments into
qemuAppendDomainMemoryMachineParams(). Unfortunately, expected
outputs for some qemuxml2argvdata cases needed to be updated
because the order in which arguments are generated is changed.
But there's no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuBuildMachineCommandLine() function is needlessly long.
Separate out parts that generate arguments based on
domainDef->features[] into
qemuAppendDomainFeaturesMachineParam(). Unfortunately, expected
outputs for some qemuxml2argvdata cases needed to be updated
because the order in which features are generated is changed. But
there's no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Almost all of memory models we currently support allow setting
virDomainMemoryDef::targetNode so that the memory module is
associated with given guest NUMA node. And we do have a check
whether the requested node is within bounds, but it's executed
only when building QEMU's cmd line. Move it into validation
phase.
While this commit is moving the validation to a place that does
not validate all the possible code paths, it's okay, because only
the explicit memory device has user-configurable target node
which could break the assumption.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After previous commit, when memory-hotplug-dimm-addr.xml file was
fixed, we can also introduce the test case to qemuxml2xmltest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, we are testing memory-hotplug-dimm-addr against a set of
explicitly listed capabilities. While this works, lets switch it
to DO_TEST_CAPS_LATEST() so that the latest capabilities are
used. This in turn means, we have to update the <emulator/>
because the latest capabilities don't contain caps for
qemu-system-i386.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, virJSONValueObjectHasKey() can return one of three
values:
-1 if passed object type is not VIR_JSON_TYPE_OBJECT,
0 if the key is not present, and finally
1 if the key is present.
But, neither of callers is interested in the -1 case. In fact,
some callers call this function treating -1 and 1 cases the same.
Therefore, make the function return just true/false and fix few
callers that explicitly checked for == 1 case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When the <loader stateless='yes'/> attribute is set, the QEMU driver
needs to do three things
- Avoid looking for an NVRAM template
- Avoid auto-populating an <nvram/> path
- Find firmware descriptors with mode=stateless instead of mode=split
Note, the first thing happens automatically when we solve the second
thing.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Normally when an UEFI firmware is marked as read-only, an associated
NVRAM file will be created. Some builds of UEFI firmware, however, wish
to remain stateless and so will be read-only, but never have any NVRAM
file. To represent this concept a 'stateless' tristate bool attribute
is introduced on the <loader/> element.
There are rather a large number of permutations to consider.
With default firmware selection
* <os/>
=> Historic default, no change
* <os>
<loader stateless='yes'/>
</os>
=> Explicit version of historic default, no change
* <os>
<loader stateless='no'/>
</os>
=> Invalid, bios is always stateless
With manual legacy BIOS selection
* <os>
<loader>/path/to/seabios</loader>
...
</os>
=> Historic default, no change
* <os>
<loader stateless='yes'>/path/to/seabios</loader>
...
</os>
=> Explicit version of historic default, no change
* <os>
<loader stateless='no'>/path/to/seabios</loader>
...
</os>
=> Invalid, bios is always stateless
With manual UEFI selection
* <os>
<loader type='pflash'>/path/to/edk2</loader>
...
</os>
=> Historic default, no change
* <os>
<loader type='pflash' stateless='yes'>/path/to/edk2</loader>
...
</os>
=> Skip auto-filling NVRAM / template
* <os>
<loader type='pflash' stateless='no'>/path/to/edk2</loader>
...
</os>
=> Explicit version of historic default, no change
With automatic firmware selection
* <os firmware='bios'/>
=> Historic default, no change
* <os firmware='bios'>
<loader stateless='yes'/>
</os>
=> Explicit version of historic default, no change
* <os firmware='bios'>
<loader stateless='no'/>
</os>
=> Invalid, bios is always stateless
* <os firmware='uefi'/>
=> Historic default, no change
* <os firmware='uefi'>
<loader stateless='yes'/>
</os>
=> Skip auto-filling NVRAM / template
* <os firmware='uefi'>
<loader stateless='no'/>
</os>
=> Explicit version of historic default, no change
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Note that we can only do this for intel-iommu and virtio-iommu,
which are configured using -device; smmuv3 is configured using
a machine type property, so there's no room on the command line
for an alias in that case.
https://bugzilla.redhat.com/show_bug.cgi?id=2108483
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
since qemu 6.0, if migration is blocked for some reason, 'query-migrate'
will return an array of error strings describing the migration blockers.
This can be used to check whether there are any devices blocking
migration, etc.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
QEMU supports hotplug of a cdrom device with USB or SCSI bus. Just
unblock these devices in qemuDomainAttachDeviceDiskLiveInternal() and
qemuDomainDetachPrepDisk().
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/261
Signed-off-by: minglei.liu <minglei.liu@smartx.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These wrapper functions were used to adapt the virObjectUnref() function
signature for different callbacks. But in commit 0d184072, the
virObjectUnref() function was changed to return a void instead of a
bool, so these adapters are no longer necessary.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The getters/setters for individual properties of migration
speed/downtime/cache size are unused once we switched to setting them
purely via migration parameters. Remove the unused helpers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU offers two attributes for handling reset requests of an USB
host device: guest-reset and guest-resets-all. When combined they
act as follows:
1) guest-reset=false
The guest is not allowed to reset the physical USB device.
2) guest-reset=true,guest-resets-all=false
The guest is allowed to reset the device when it is not yet
initialized (aka no USB bus address assigned). Usually this results
in one guest reset being allowed. This is the default behavior.
3) guest-reset=true,guest-resets-all=true
The guest is allowed to reset the device as it pleases.
Now, there's a clear 1:1 mapping with our representation of
guestReset, so generating cmd line is trivial.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will need two attributes of usb-host device to set:
guest-reset and guest-resets-all. The former was introduced in
QEMU v4.0.0-rc0~56^2 and the other in v4.2.0-rc1~9^2. Hence,
track the latter only as it's only starting from that commit when
QEMU has both attributes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some USB devices have a buggy firmware that either crashes on
device reset, or make the device unusable in some other way.
Fortunately, QEMU offers a way to skip device reset either
completely, or if device is not initialized yet. Expose this
ability to users under:
<hostdev mode='subsystem' type='usb'>
<source guestReset='off'/>
</hostdev>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
My commit of v6.9.0-rc1~457 was a bit too harsh. While it served
its purpose (adding usb-host.hostdevice capability) it has a side
effect: because I copied reply from qemu-5.1.0 to older .replies
files one might now think that say qemu-3.1.0 supports both
.guest-reset and .guest-resets-all properties. But in fact it
doesn't. There are three problematic properties:
1) guest-reset, introduced in v4.0.0-rc0~56^2
2) guest-resets-all introduced in v4.2.0-rc1~9^2
3) suppress-remote-wake introduced in v5.0.0-rc0~148^2~4
Remove these properties from versions that could not have had
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we have bunch of PCI/USB tests cases for
qemuxml2argvtest and qemuxml2xmltest but all of them run without
any capabilities. This makes is needlessly complicated when
trying to extend them. Switch to DO_TEST_CAPS_LATEST().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extend the test for io_uring to also test startup policy.
Since the actual logic for dropping disks is in the host preparation
phase, thus skipped for tests we can use any file path.
Add a case also for 'file' backing to have all cases covered.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities for that version were not updated from the development
version and thus would fail our upcoming minimum version change. Fake
the data to report 4.2.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities for that version were not updated from the development
version and thus would fail our upcoming minimum version change. Fake
the data to report 4.2.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cpu commandline is identical with the '-latest' version so there's
no need for a separate case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it obvious that the fake cpu does not apply to the test cases based
on real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test was showing that the 'blockdev' capability is properly added
although we didn't detect it yet. Unfortunately this test can't be
carried over once we bump minimum qemu version to qemu-4.2.
Make the test case future-proof by removing the qemu-4.0.0 version which
would become pointless and use only already deprecated capability flags
so that the test output does not change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tested net device has the same syntax with latest qemu so there's no
need to have a version-locked test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cpu feature formatting doesn't change between the versions thus we
can just keep the '-latest' versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tested feature doesn't change across versions so we can use the
modern testing infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The version-locked version of the test data is identical to the 'latest'
version so we can remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prior to qemu-3.2 we'd have to disable the 'pconfig' feature explicitly
which is no longer needed with new qemu. Remove the version locked to
qemu-3.1 as the 'latest' case sufficiently handles what we want to test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the test data for qemu-2.11, qemu-2.12 and qemu-3.0 which are no
longer supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage pool tests have host-specific versions which I neglected to
update in commit c44930d932 thus breaking
the test-suite on non-linux OSes.
Fixes: c44930d932
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Treat the 'protocolVer' field as a string so that e.g. '4.1' can be
used. Forbid only ',' in the string as it's a separator of arguments for
mount options.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, a firmware configuration such as
<os firmware='efi'>
<firmware>
<feature enabled='yes' name='enrolled-keys'/>
</firmware>
</os>
will correctly pick a firmware that implements the Secure Boot
feature and initialize the NVRAM file so that it contains the
keys necessary to enforce the signing requirements. However, the
lack of a
<loader secure='yes'/>
element makes it possible for pflash writes to happen outside
of SMM mode. This means that the authenticated UEFI variables
where the keys are stored could potentially be overwritten by
malicious code running in the guest, thus making it possible to
circumvent Secure Boot.
To prevent that from happening, automatically turn on the
loader.secure feature whenever a firmware that implements Secure
Boot is chosen by the firmware autoselection logic. This is
identical to the way we already automatically enable SMM in such
a scenario.
Note that, while this is technically a guest-visible change, it
will not affect migration of existings VMs and will not prevent
legitimate guest code from running.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Generally speaking, when firmware autoselection is in use we
don't want any information to be provided manually. There are
two exceptions:
* we still want the path to the NVRAM file to be customizable;
* using <loader secure='yes'/> was how you would ask for a
firmware that implements the Secure Boot feature in the
original approach to firmware autoselection, so we want to
keep that working.
Anything else should result in a descriptive error.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/327
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This combination doesn't make sense and so the firmware
autoselection logic will not be able to find a suitable firmware,
but it's more user-friendly to report a detailed error upfront.
Note that this check would ideally happen in the validate phase,
but if we moved it there we would no longer be able to
automatically enable secure-boot when enrolled-keys=yes. Since
the combination never resulted in a working configuration, the
chances of this causing real-world VMs to disappear are
extremely low.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The latter doesn't make sense without the former, so make that
visible in the XML.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the lack of a <loader> element results in the <nvram>
element being completely ignored, but this is unnecessarily
limiting: even when firmware autoselection is in use, it should
be possible for the user to specify a custom path for the NVRAM
file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Note that some of these new tests are displaying incorrect or
suboptimal behavior. When we address those in upcoming patches,
this will be highlighted by changes in the test data.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This currently has not effect whatsoever, so it's just cluttering
the input files.
We're going to add specific handling for this scenario, as well
as a test case covering it, in an upcoming commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This does the opposite of
commit 392292cd99
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Feb 23 12:45:51 2022 +0000
tests: don't use auto-generated NVRAM path in tests
in order to minimize input files.
We're going to add a test case specifically covering the use of
custom NVRAM paths with firmware autoselection in an upcoming
commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When testing firmware selection, we don't really care about any
of the hardware assigned to the VM, and in fact it's better to
keep it as minimal as possible to make sure that the focus
remains on the firmware bits.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Group all tests related to firmware selection together and give
them consistent names that leave room for further tests to be
added in an upcoming commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was introduced in
commit 5882064084
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Wed Feb 25 15:45:26 2015 +0100
tests: Add test for os interleaving
to ensure a recent change in the schema was behaving correctly.
Seven years later, it no longer seems very useful to keep it
around.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This simplifies the test data without negatively impacting test
coverage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The pci-bridge-many-disks test case is not related to firmware
handling at all, so we can trim it without losing any coverage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This supports sockets created by libvirt and passed by FD using the
same method as in security_dac.c.
Signed-off-by: David Michael <david@bigbadwolfsecurity.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to [1]:
Prior to GnuTLS 3.6.0 for the ephemeral or anonymous
Diffie-Hellman (DH) TLS ciphersuites the application was
required to generate or provide DH parameters. That is no
longer necessary as GnuTLS utilizes DH parameters and
negotiation from [RFC7919].
This allows us to:
a) drop the code that's setting DH params,
b) drop @dhParams member from _virNetTLSContext struct. and
c) drop gnutls_dh_params_generate2() mock.
1: https://www.gnutls.org/manual/html_node/Parameter-generation.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ever since v7.6.0-rc1~235 we can use ovs-vsctl to set QoS instead
of tc. However, we don't have a test that's verifying generated
cmd line for ovs-vsctl.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Our coding style expects a long line to be broken into shorter
lines which are then aligned on the first character, for
instance:
"some string that's broken "
"into multiple lines"
However, one can argue that there are few cases where shifting
the alignment makes the code more readable. And this is the case
of expected cmd line for DO_TEST_SET() where a long cmd line can
be aligned on the arguments rather than the binary:
TC " filter ..."
" police ..."
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The last usage of the testMinimalStruct struct was removed in
v1.2.2-rc1~206 which forgot to remove the struct as well. Remove
it now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Some cases that call DO_TEST_SET() macro wrap each argument in
curved brackets. This is unnecessary, drop the brackets.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When resuming post-copy migration users may want to limit the bandwidth
used by the migration and use a value that is different from the one
specified when the migration was originally started.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/333
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert all the cases where we can unconditionally free
the virURI at the end of scope.
In libxlDomainMigrationDstPrepare, uri is only filled
if uri_in was present, so moving the virURIFree out of
the condition is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Don't restrict this to domcaps testing only, we will soon
need it for qemu command line validation
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Internally we already collect x86 host family + model + stepping
numeric values. This exposed them in capabilities CPU output.
Example:
$ sudo virsh capabilities | grep -A1 -B1 signature
<microcode version='240'/>
<signature family='6' model='94' stepping='3'/>
<counter name='tsc' frequency='3408010000' scaling='no'/>
Users need to know these values to calculate an expected.
SEV-ES/SEV-SNP launch measurement.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add an element to configure the thread pool size:
...
<binary>
<thread_pool size='16'/>
</binary>
...
https://bugzilla.redhat.com/show_bug.cgi?id=2072905
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As of v7.0.0-877-g70ac26b9e5 QEMU exposes its default event loop
for devices with no IOThread assigned as an QMP object. In the
very next commit (v7.0.0-878-g71ad4713cc) it was extended for
thread-pool-min and thread-pool-max attributes. Expose them under
new <defaultiothread/> element.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability reflects whether QEMU allows setting
thread-pool-min and thread-pool-max attributes on iothread
object. Since both attributes were introduced in the same commit
(v7.0.0-878-g71ad4713cc) and can't exist independently of each
other we can stick with one capability covering both of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
At least in case of QEMU an IOThread is actually a pool of
threads (see iothread_set_aio_context_params() in QEMU's code
base). As such, it can have minimal and maximal number of worker
threads. Allow setting them in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This command tells QEMU to start listening for an incoming post-copy
recovery connection. Just like migrate-incoming is used for starting
fresh migration on the destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Jobs that are supposed to remain active even when libvirt daemon
restarts were reported as started at the time the daemon was restarted.
This is not very helpful, we should restore the original timestamp.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Notable changes:
- Icelake-Client cpu model family removed:
"Icelake-Client-noTSX-x86_64-cpu"
"Icelake-Client-v1-x86_64-cpu"
"Icelake-Client-v2-x86_64-cpu"
"Icelake-Client-v3-x86_64-cpu"
"Icelake-Client-x86_64-cpu"
- 'zero-copy-send' migration feature added
- display 'sdl' qapified
- 'arch-lbr' cpu feature added
- new HyperV enlightenments:
'hv-tlbflush-ext'
'hv-tlbflush-direct'
'hv-emsr-bitmap'
'hv-xmm-input'
- 'none-machine' has two new properties:
- "boot" described as "Boot configuration"
- "memory" described as "Memory size configuration"
- 'igd-passthrough-isa-bridge' is now Xen-only
- CXL: Compute eXpress Link related devices:
"CXL"
"cxl-rp",
"cxl-type3",
"pxb-cxl",
"pxb-cxl-bus",
"pxb-cxl-host",
- 'dma-translation' feature of 'intel-iommu'
- 'vmcb-clean' cpu feature now migratable:
- possibly due to host kernel upgrade
- changes commandline generated for the 'cpu-host-model' case of
qemuxml2argvtest
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already allow users to provide TFTP root path in network XML
and not specify any DHCP. This makes sense, because dnsmasq is
not only DHCP server but also TFTP server and users might have
a DHCP server configured on their own, outside of libvirt's
control and want just the TFTP part.
By moving TFTP config generator out of DHCP generator and calling
it for every IPv4 range, users can finally enable just TFTP.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2026765
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainObj struct has @pid member where the domain's
hypervisor PID is stored (e.g. QEMU/bhyve/libvirt_lxc/... PID).
However, we are not consistent when it comes to shutoff state.
Initially, because virDomainObjNew() uses g_new0() the @pid is
initialized to 0. But when domain is shut off, some functions set
it to -1 (virBhyveProcessStop, virCHProcessStop, qemuProcessStop,
..).
In other places, the @pid is tested to be 0, on some other places
it's tested for being negative and in the rest for being
positive.
To solve this inconsistency we can stick with either value, -1 or
0. I've chosen the latter as it's safer IMO. For instance if by
mistake we'd kill(vm->pid, SIGTERM) we would kill ourselves
instead of init's process group.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
There are some tools that convert hostname to lowercase before
resolving it (e.g. ssh). In a way it makes sense because DNS is
case insensitive and in case of ssh the lowercase version is then
used to find matching record in its config file. However, our NSS
module performs case sensitive comparison, which makes it useless
with ssh. Just consider a machine named FooBar.
Therefore, switch to case insensitive string comparison.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1777873
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add POWER10 as a supported cpu model.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use the newly added ARG_CAPS_HOST_CPU_MODEL to set which host CPU we
expect the test to use - the test should fail when using a POWER8 host
cpu but complete when using a POWER9 host cpu.
Two new macros were added because we will be adding similar tests in the
near future when adding support for the Power10 chip.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When loading a latest caps for an arch for the first time the following
occurs in testQemuInfoInitArgs():
- the caps file is located. It's not in the cache since it's the first time
it's being read;
- the cachecaps are retrieved using qemuTestParseCapabilitiesArch() and
stored in the capscache;
- FLAG_REAL_CAPS is set and regular flow continues.
Loading the same latest caps for the second time the caps are loaded from the
cache, skipping qemuTestParseCapabilitiesArch(). By skipping this function it
means that it also skips virQEMUCapsLoadCache() and, more relevant to
our case, virQEMUCapsInitHostCPUModel(). This function will use the
current arch and cpuModel settings to write the qemuCaps that are being
stored in the cache. And we're also setting FLAG_REAL_CAPS, meaning that
we won't be updating the qemucaps host model via testUpdateQEMUCaps() as
well.
This has side-effects such as:
- the first time the latest caps for an arch is loaded determines the
cpuModel it'll use during the current qemuxml2argvtest run. For
example, when running all tests, the first time the latest ppc64 caps
are read is on "disk-floppy-pseries" test. Since the current host arch
at this point is x86_64, the cpuModel that will be set for this
capability is "core2duo";
- every other latest arch test will use the same hostCPU as the first
one set since we read it from the cache after the first run.
qemuTestSetHostCPU() makes no difference because we won't update the
host model due to FLAG_REAL_CAPS being set. Using the previous example,
every other latest ppc64 test that will be run will be using the
"core2duo" cpuModel.
Using fake capabilities (e.g. using DO_TEST()) prevents FLAG_REAL_CAPS to
be set, meaning that the cpuModel will be updated using the current
settings the test is being ran due to testUpdateQEMUCaps().
Note that not all latest caps arch tests care about the cpuModel being
set to an unexpected default cpuModel. But some tests will care, e.g.
"pseries-cpu-compat-power9", and changing it from DO_TEST() to
DO_TEST_CAPS_ARCH_LATEST() will make it fail every time the
"disk-floppy-pseries" is being ran first.
One way of fixing it is to rethink all the existing logic, for example
not setting FLAG_REAL_CAPS for latest arch tests. Another way is
presented here. ARGS_CAPS_HOST_CPU_MODEL is a new testQemuInfo arg that
allow us to set any specific host CPU model we want when running latest
arch caps tests. This new arg can then be used when converting existing
DO_TEST() testcases to DO_TEST_CAPS_ARCH_LATEST() that requires a
specific host CPU setting to be successful, which we're going to do in
the next patch with "pseries-cpu-compat-power9".
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuxml2xmltests that have "pseries" in the name now use the
DO_TEST_CAPS_LATEST_ARCH() macro.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add nodedev schema parsing and format tests for the optional new device
address on the css devices.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The USB device redirection works in a similar way as Spice. The
underlying 'dbus' channel is set to "org.qemu.usbredir" by default for
the client to identify the channel purpose (as specified in -display
dbus documentation).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Like a Spice port, a dbus serial must specify an associated channel name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, libvirt will start a private bus and tell QEMU to connect to
it. Instead, a D-Bus "address" to connect to can be specified, or the
p2p mode enabled.
D-Bus display works best with GL & a rendernode, which can be specified
with <gl> child element.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unix socket chardevs with FD passing need to use the direct mode so we
need to convert it to use qemuFDPassDirect.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we store the state of the host FIPS mode setting in the qemu
driver object, we don't need to outsource the logic into
'qemuCheckFips'.
Additionally since we no longer support very old qemu's which would not
yet have --enable-fips we can drop the part of the comment about very
old qemus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rather than re-query all the time we can cache the state of FIPS of the
host as it will not change during the runtime of the guest.
Introduce a 'hostFips' flag to 'virQEMUDriver' and move the code
checking the state from 'qemuCheckFips' to 'qemuStateInitialize' and
also populate 'hostFips' in qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce 'qemuBuildCommandLineFlags' and use it instead of specific
flag booleans.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add support for the mode and add the corresponding qemuxml2argv test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'absolute' clock offset type has a 'start' attribute which is an
unix epoch timestamp to which the hardware clock is always set at start
of the VM.
This is useful if some VM needs to be kept set to an arbitrary time for
e.g. testing or working around broken software.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to always store the state of the feature in the
virDomainDef struct, otherwise
<smm state='off'/>
will incorrectly be interpreted as if the <smm> element was not
present.
Fixes: eeb94215b0
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This complements the existing smm=on tests. Looking at the output
files, one can immediately see how this case is currently not being
handled correctly. We're going to fix that in the next commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST() instead of hardcoding capabilities and
add the xml2xml part, which was missing; finally, rename it to
accomodate the complementary smm=off test that we're about to
introduce.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new infrastructure which stores the fds inside 'qemuFDPass'
objects in the private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the block guarded by 'is_tap' boolean to the only place where
'is_tap' is set to true.
This causes few arguments to change places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we use our own fdset ID when hot-adding a fdset we can vastly
simplify our internals.
As a stop-gap when a fdset would be added behind libvirt's back we'll
validated that the fdset to be added is not yet used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While 'add-fd' qmp command gives the possibility to find an unused fdset
ID when hot-adding fdsets, such usage is extremely inconvenient.
This patch allows us to track the used fdset id so that we can avoid the
need to check results and thus employ simpler code flow when hot-adding
devices which use FD passing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's effectively replaced by checks in qemuFDPassTransfer. This will
simplify cleanup paths on constructing the qemuFDPass object when FDs
are being handled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add possibility to delay checks to the point when the FDs are to be
passed to qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All QEMU versions we care about already support migration events.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Everything spice is not supported (and does not make sense) without spice
graphics. For some tests I also added cirrus VGA capability so that the XML
stays simple and libvirt can guess a default video model rather than adding too
much of an irrelevant XML into the individual tests.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This old test was added by me to allow people to keep the spicevmc
channel while changing graphics type from spice to something else.
However we do not do this in other places and also now we have all the
Validate functions so it is better to show the user they will not have
the spicevmc channel available rather than simply not formatting it on
the qemu command line.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the ability to configure a qemu-vdagent in guest domains. This
device is similar to the spice vdagent channel except that qemu handles
the spice-vdagent protocol messages itself rather than routing them over
a spice protocol channel.
The qemu-vdagent device has two notable configuration options which
determine whether qemu will handle particular vdagent features:
'clipboard' and 'mouse'.
The 'clipboard' option allows qemu to synchronize its internal clipboard
manager with the guest clipboard, which enables client<->guest clipboard
synchronization for non-spice guests such as vnc.
The 'mouse' option allows absolute mouse positioning to be sent over the
vdagent channel rather than using a usb or virtio tablet device.
Sample configuration:
<channel type='qemu-vdagent'>
<target type='virtio' name='com.redhat.spice.0'/>
<source>
<clipboard copypaste='yes'/>
<mouse mode='client'/>
</source>
</channel>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Detect whether qemu supports the qemu-vdagent character device. This
enables support for copy/paste with VNC graphics.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Notable schema changes:
- 'cluster-id' is now reported for CPU topology
- 'display-update' QMP command added
- 'main-loop' QOM object added with a whole set of properties
- 'cpu0-id' field reported in SEV data
- 'blockdev-change-medium' command now has 'force' property
- 'screendump' QMP command now has a 'format' property
- supported formats are 'ppm' and 'png'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Validate the domain configuration to ensure that if there are more than
one vgpu assigned to a domain, only one of them has 'ramfb' enabled.
This was never a supported configuration. QEMU failed confusingly when
attempting to start a domain with this configuration. This change
attempts to provide better information about the error.
https://bugzilla.redhat.com/show_bug.cgi?id=2079760
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are no major changes since 7.0.0-rc2, but a few additional
features are enabled in this build.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While we don't want to aim for the shortest list of disabled features in
the baseline result (it would select a very old model), we want to do so
while looking at any of the input models for which we're trying to
compute a baseline CPU model. Given a set of input models, we always
want to take the least capable one of them (i.e., the one with shortest
list of disabled features) or a better model which is not one of the
input models.
So when considering an input model, we just check whether its list of
disabled features is shorter than the currently best one. When looking
at other models we check both enabled and disabled features while
penalizing disabled features as implemented by the previous patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For finding the best matching CPU model for a given set of features
while we don't know the CPU signature (i.e., when computing a baseline
CPU model) we've been using a "shortest list of features" heuristics.
This works well if new CPU models are supersets of older models, but
that's not always the case. As a result it may actually select a new CPU
model as a baseline while removing some features from it to make it
compatible with older models. This is in general worse than using an old
CPU model with a bunch of added features as a guest OS or apps may crash
when using features that were disabled.
On the other hand we don't want to end up with a very old model which
would guarantee no disabled features as it could stop a guest OS or apps
from using some features provided by the CPU because they would not
expect them on such an old CPU.
This patch changes the heuristics to something in between. Enabled and
disabled features are counted separately so that a CPU model requiring
some features to be disabled looks worse than a model with fewer
disabled features even if its complete list of features is longer. The
penalty given for each additional disabled feature gets bigger to make
longer list of disabled features look even worse.
https://bugzilla.redhat.com/show_bug.cgi?id=1851227
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These ancient RHEL-only CPU models should not really be used by any CPU
definition created by libvirt. We keep them just for backwards
compatibility with domains which might still be using them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As of 47503cc859 we are statically linking libtest_utils_qemu.a
into qemuhotplugmock.so (see the original commit for reasoning).
However, this breaks ASAN on older clang because now
qemuhotplugtest has two instances of virCPUDef global variables
(cpuDefault, cpuHaswell, cpuPower8, cpuPower9). One that comes
from the binary itself (which also links with
libtest_utils_qemu.a) and the other from the mock. Resolve this
by making the variables static and introducing getter and setter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As of 47503cc859 we are statically linking libtest_utils.a into
qemuhotplugmock.so (see the original commit for reasoning).
However, this breaks ASAN on older clang because now
qemuhotplugtest has two instances of virTestHostArch global
variable. One that comes from the binary itself (which also links
with libtest_utils.a) and the other from the mock. Resolve this
by making the variable static and introducing getter and setter.
Well, the former already exists (as virArchFromHost()) so only
the latter is needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When constructing mock_libs array it is firstly initialized to a
static set of mocks followed by couple of WITH_* checks to append
driver specific mocks. These checks are then repeated when
filling some other variables (e.g. supplementary helpers,
libraries, tests, etc.). Dissolve the former in the latter since
we are already doing that, partially, for qemu (qemucapsprobemock
and qemuhotplugmock)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of ad81aa8ad0 the qemuhotplugmock.c calls
testQemuPrepareHostBackendChardevOne() which is implemented in
testutilsqemu.c. However, the mock is not linked with
testutilsqemu static library which makes some tools (valgrind
particularly) unhappy because the resulting mock library has
unresolved symbol.
The fix is simple, link mock library with test_utils_qemu_lib and
also with test_utils_lib since testutils.c calls some functions
from testutils.c.
Since these two libraries are declared only after mock_libs[], I
had to move the line that declares qemuhotplugmock after those
two.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On macOS when BROKEN_POLL is set in GLib, our tests will periodically
trigger a warning:
(process:50880): GLib-WARNING **: 02:54:15.272: poll(2) failed due to: Bad file descriptor.
Our code is inherantly racy, calling g_source_destroy which
removes the FD from the event thread poll asynchronously but
we close the FD immediately after g_source_destroy returns.
With poll() this results in POLLNVAL which we're ignoring, but
with select() it generates the BADF error on macOS.
We need to ignore the warnings on macOS to avoid abort()ing
our test programs.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/303
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Few minor changes in qemu since the last update:
- 'cocoa' display and corresponding props (not present in this build)
Changes in build:
- dbus display driver re-enabled
- gtk display support re-disabled
- xen support re-disabled
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend the 'disk-cdrom-network' to cover this instance. This also
validates that the parameters of -blockdev conform to the QAPI schema.
Also add the xml2xml variant of this test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reject encryption requests for unsupported image format types.
Add negative test for the rejected cases as well as modify
'disk-network-rbd-encryption' case to validate that with librbd
encryption the format doesn't matter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was supposed to test the behavior when
QEMU_CAPS_MACHINE_PSERIES_MAX_CPU_COMPAT is present, but these
days that's always the case and pseries-cpu-compat already
provides all the coverage we need.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability is not used anymore since "-incoming defer" is supported
by all QEMU versions we care about.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Also, validate that the requested feature is supported by QEMU.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce QEMU_CAPS_VIRTIO_RSS capability which tracks
virtio-net.rss attribute introduced in qemu-5.2.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Added "rss" and "rss_hash_report" configuration that should be
used with qemu virtio RSS. Both options are triswitches. Used as
"driver" options and affects only NIC with model type "virtio".
In other patches - options should turn on virtio-net RSS and hash
properties.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The property is parsed using virTristateBoolTypeFromString() but
formatted as if it was a regular bool, which results in the
following incorrect conversion:
BOOL_ABSENT -> managed='no'
BOOL_YES -> managed='yes'
BOOL_NO -> managed='yes'
Use the virTristateBoolTypeToString() helper to ensure the
setting can survive a roundtrip conversion.
Fixes: 4b4a981d60
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Found when building on Fedora 36 on s390x.
C compiler for the host machine: gcc (gcc 12.0.1 "gcc (GCC) 12.0.1 20220308 (Red Hat 12.0.1-0)")
C linker for the host machine: gcc ld.bfd 2.37-24
In function ‘cpuTestUpdateLiveCompare’,
inlined from ‘cpuTestUpdateLive’ at ../dist-unpack/libvirt-8.2.5/tests/cputest.c:784:12:
../dist-unpack/libvirt-8.2.5/tests/cputest.c:696:21: warning: potential null pointer dereference [-Wnull-dereference]
696 | featAct->policy == VIR_CPU_FEATURE_REQUIRE) ||
| ~~~~~~~^~~~~~~~
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting with qemu-3.1 we always have the '-overcommit' argument and use
it instead of '-realtime'. Remove the capability check and fix all
fake-caps tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag was based on a version check which no longer made sense. Remove
the flag by replacing it's only use by an arch-check which is equivalent
at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All qemu versions now support FD passing either directly or via FDset.
Assume that we always have this capability so that we can simplify
chardev handling in many cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu needs to be an integrated device, and our address
assignment code will make sure that is the case. If the user has
provided an explicit address, however, we should make sure any
addresses pointing to a different bus are rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu is a PCI device and attempts to use a different
address type should be rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The device is configured to be an integrated endpoint, as is
necessary for it to function correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu doesn't work without ACPI, so we need to make sure
the latter is enabled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability detects the availability of the boot-bypass
property of the virtio-iommu-pci device.
This property was only introduced in QEMU 7.0 but, since the
device has been around for much longer, we end up querying its
properties for several more releases. As I don't have convenient
access to the 10+ binaries necessary to regenerate the replies,
I just put some fake data in there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability detects the availability of the virtio-iommu-pci
device.
Note that, while this device is present even in somewhat old
versions of QEMU, it's only some recent changes that made it
actually usable for our purposes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU binary is built from the v7.0.0-rc2 tag.
This causes the argument to -device to be generated in JSON
format, same as what 1a691fe1c8 has done for x86_64.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The QEMU binary is built from the v7.0.0-rc2 tag.
Some of the additional capabilities that show up are a
consequence of more features being enabled in this build than
in the one used to generate the replies initially.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
While commit a5e659f0 removed the restriction against multiple queues
for the vdpa net device, there were some missing pieces. Configuring a
device statically and then starting the domain worked as expected, but
hotplugging a device didn't have the expected multiqueue support
enabled. Add the missing bits.
Consider the following device xml:
<interface type="vdpa">
<mac address="00:11:22:33:44:03" />
<source dev="/dev/vhost-vdpa-0" />
<model type="virtio" />
<driver queues='2' />
</interface>
Without this patch, hotplugging the above XML description resulted in
the following:
{"execute":"netdev_add","arguments":{"type":"vhost-vdpa","vhostdev":"/dev/fdset/0","id":"hostnet1"},"id":"libvirt-392"}
{"execute":"device_add","arguments":{"driver":"virtio-net-pci","netdev":"hostnet1","id":"net1","mac":"00:11:22:33:44:03","bus":"pci.5","addr":"0x0"},"id":"libvirt-393"}
With the patch, hotplugging results in the following:
{"execute":"netdev_add","arguments":{"type":"vhost-vdpa","vhostdev":"/dev/fdset/0","queues":2,"id":"hostnet1"},"id":"libvirt-392"}
{"execute":"device_add","arguments":{"driver":"virtio-net-pci","mq":true,"vectors":6,"netdev":"hostnet1","id":"net1","mac":"00:11:22:33:44:03","bus":"pci.5","addr":"0x0"},"id":"libvirt-393"}
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2024406
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Apply the user-requested changes to the device definition as requested
by the <qemu:deviceOverride> element from the custom qemu XML namespace.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/287
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 06c960e477.
Turns out, this feature is not needed and QEMU will fix TSC
without any intervention from outside.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>P
QEMU 7.0.0 adds a new property tsc-clear-on-reset to x86 CPU, corresponding
to Libvirt's <tsc on_reboot="clear"/> element. Plumb it in the validation,
command line handling and tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make sure that all tests are run after the helpers and mocks are
(re)built. This enables for example using "meson test" as the
command line passed to "git bisect run".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let's generate prealloc-threads property onto the cmd line if
domain configuration requests so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The prealloc-threads is property of memory-backend class which is
parent to the other three classes memory-backend-{ram,file,memfd}.
Therefore the property is present for all, or none if QEMU is
older than v5.0.0-rc0~75^2~1^2~3 which introduced the property.
Anyway, the .reserve property is the same story, and we chose
memory-backend-file to detect it, so stick with our earlier
decision and use the same backend to detect this new property.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since its v5.0.0 release QEMU is capable of specifying number of
threads used to allocate memory. It defaults to 1, which may be
too low for humongous guests with gigantic pages.
In general, on QEMU cmd line level it is possible to use
different number of threads per each memory-backend-* object, in
practical terms it's not useful. Therefore, use <memoryBacking/>
to set guest wide value and let all memory devices 'inherit' it,
silently. IOW, don't introduce per device knob because that would
only complicate things for a little or no benefit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
schemas are used for more than just documentation,
virsh edit fails if schemas are not available.
Therefore, fix the no-docs build by moving schemas/
to the parsing code inside src/conf/.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In cases when the hostname of the NBD server doesn't match the hostname
in the TLS certificate the new attribute 'tlsHostname' can be used to
override it.
Add the XML infrastructure and tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Detect that qemu can override TLS hostname setting for NBD clients.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to commit v6.2.0-2296-g9f0369efb0
Notable changes:
- 'tls-hostname' field for NBD client to override local hostname
- machine types 'pc-i440fx-1.7' and older are now deprecated
- 'snapshot-access' block driver added
- The 'protocol' field of 'set_password' and 'expire_password'
parameter is now an enum instead of a pure string allowing 'vnc' and
'spice' as value and the arguments are also covered by the schema.
- 'copy-before-write' block driver now has a 'bitmap' property
- 'query-migrate' now reports 'precopy-bytes', 'downtime-bytes',
'postcopy-bytes' for 'ram' and 'disk' statistics
- RTC_CHANGE event now has a 'qom-path' property to identify the RTC
- 'umip' cpu feature is now migratable
- SGX property 'section-size' reinstated after regression
Changes in build setting:
- fuse block export support now enabled
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers except the one in the 'esx' driver pass the flag. The 'esx'
driver has a check that 'def->ndisks' is zero after parsing the
definition. This means that we can simply always parse the disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Long ago we adapted to Linux kernel changes which inverted the
behaviour of the conntrack --ctdir setting:
commit a6a04ea47a
Author: Stefan Berger <stefanb@us.ibm.com>
Date: Wed May 15 21:02:11 2013 -0400
nwfilter: check for inverted ctdir
Linux netfilter at some point (Linux 2.6.39) inverted the meaning of the
'--ctdir reply' and newer netfilter implementations now expect
'--ctdir original' instead and vice-versa.
We check for the kernel version and assume that all Linux kernels with version
2.6.39 have the newer inverted logic.
Any distro backporting the Linux kernel patch that inverts the --ctdir logic
(Linux commit 96120d86f) must also backport this patch for Linux and
adapt the kernel version being tested for.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Given our supported platform targets, we no longer need to
consider a version of Linux before 2.6.39, so can drop
support for the old direction behaviour.
The test suite updates are triggered because that never
probed for the ctdir direction, and so the iptables syntax
generator unconditionally dropped the ctdir args.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Long ago we adapted to iptables changes by introducing support
for '-m conntrack':
commit 06844ccbaa
Author: Stefan Berger <stefanb@us.ibm.com>
Date: Tue Aug 6 20:30:46 2013 -0400
nwfilter: Use -m conntrack rather than -m state
Since iptables version 1.4.16 '-m state --state NEW' is converted to
'-m conntrack --ctstate NEW'. Therefore, when encountering this or later
versions of iptables use '-m conntrack --ctstate'.
Given our supported platform targets, we no longer need to
consider a version of iptables before 1.4.16, so can drop
support for the old syntax.
The test suite updates are triggered because that never
probed for the new syntax, and so unconditionally
generated the old syntax.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When libc uses a define to rewrite stat64 to stat our mocks do not work if they
are chained because the symbol that we are looking up is being stringified and
therefore preventing the stat64->stat expansion per C-preprocessor rules. One
stringification macro is just enough to make it work.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have couple of tests where the obsolete IPv4-in-IPv6 notation
is used (::10.1.2.3). Change them to the correct format
(::ffff:10.1.2.3).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two standards how IPv4 address in IPv6 can be
expressed:
::10.1.2.3
::ffff:10.1.2.3
The former is obsolete and the latter should be used instead [1].
Add test cases to our sockettest to exercise parsing/formatting
of the valid address format.
1: https://datatracker.ietf.org/doc/html/rfc4291#section-2.5.5.1
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Apparently clang was fixed as it no longer considers having
global variables static a problem. Make the variables static to
be sure they aren't used outside of the source file.
This effectively reverts v1.0.6-rc1~198 which started the trend.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way that vircgroupmock works is that the vircgrouptest
creates a temporary directory and sets LIBVIRT_FAKE_ROOT_DIR env
variable which is then checked by the mock at the beginning of
basically every function it overrides (access(), stat in all its
flavours, mkdir(), etc.). The mock then creates a CGroup dir
structure. But the test is allowed to change the directory, to
accommodate environment for the particular test case. This is
done by changing the environment variable which is then detected
by the mock and the whole process repeats.
However, the way the mock detect changes is buggy. After it got
the environment variable it compares it to the last known value
(global variable @fakerootdir) and if they don't match the last
known value is set to point to the new value. Problem is that the
result of getenv() is assigned to the @fakerootdir directly.
Therefore, @fakerootdir points somewhere into the buffer of
environment variables. In turn, when the test sets new value (via
g_setenv()) it may be placed at the very same position in the env
var buffer and thus the mock fails to detect the change.
The solution is to keep our private copy of the value (by
g_strdup()) which makes the variable not rely on
getenv()/setenv() placing values at random positions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the 'nvram_template' entry is mandatory when parsing the
firmware descriptor based on flash. QEMU is extending the firmware
descriptor spec to make the 'nvram_template' optional, depending
on the value of a new 'mode' field:
- "split"
* "executable" contains read-only CODE
* "nvram_template" contains read-write VARS
- "combined"
* "executable" contains read-write CODE and VARs
* "nvram_template" not present
- "stateless"
* "executable" contains read-only CODE and VARs
* "nvram_template" not present
In the latter case, the guest OS can write vars but the
firmware will make no attempt to persist them, so any changes
will be lost at poweroff.
For now we parse this new 'mode' but discard any firmware
which is not 'mode=split' when matching for a domain.
In the tests we have a mixture of files with and without the
mode attribute.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By using the auto-generated NVRAM path in test data files, we won't see
bugs where a user specified path gets accidentally overwritten by a
post-parse callback, or VM startup. For example, this caused us to miss
the bug fixed by:
commit 24adb6c7a6
Author: Michal Prívozník <mprivozn@redhat.com>
Date: Wed Feb 23 08:50:44 2022 +0100
qemu: Don't regenerate NVRAM path if parsed from domain XML
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When building the default memory backend (which has id='pc.ram')
and no guest NUMA is configured then
qemuBuildMemCommandLineMemoryDefaultBackend() is called. However,
its return value is ignored which means that on invalid
configuration (e.g. when non-existent hugepage size was
requested) an error is reported into the logs but QEMU is started
anyway. And while QEMU does error out its error message doesn't
give much clue what's going on:
qemu-system-x86_64: Memory backend 'pc.ram' not found
While at it, introduce a test case. While I could chose a nice
looking value (e.g. 4MiB) that's exactly what I wanted to avoid,
because while such value might not be possible on x84_64 it may
be possible on other arches (e.g. ppc is notoriously known for
supporting wide range of HP sizes). Let's stick with obviously
wrong value of 5MiB.
Reported-by: Charles Polisher <chas@chasmo.org>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This demonstrates that
<os>
<loader readonly='yes' type='pflash'>/usr/share/OVMF/OVMF_CODE.fd</loader>
<nvram template="/usr/share/OVMF/OVMF_VARS.fd"/>
</os>
gets expanded to give a per-VM NVRAM path.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The following is expected to raise an error:
<os>
<loader readonly='yes' type='pflash'/>
</os>
because no path to the pflash loader is given and there is
no default built-in.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit b56a833243 removed bunch of old code after which
'demo_socket_path' in 'testActivationFDNames' is no longer used
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The systemd version in RHEL-7 lacked support for the LISTEN_FDNAMES env
variable with socket activation. Since we stopped targetting RHEL-7 we
can drop some considerable amount of compatibility code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The minimal supported version of QEMU is 2.11. And after capabilities
for older QEMUs were dropped in v7.3.0-17-g184de10c1d we have some
domaincapsdata/ files that are never read. This is because
domaincapstest uses testQemuCapsIterate() which iterates over
qemucapabilitiesdata/caps_*.xml files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All modern QEMU versions use FD passing for listening unix sockets so
the test should reflect this. This will later help when removing the
legacy code paths when we drop support for old QEMUs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't want to be dealing with real FDs thus we mock
'qemuMonitorIOWriteWithFD' to do the same thing as when no FD is being
passed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding an exception for the whole file usually defeats the purpose of a
syntax check and is also likely to get forgotten once the file is
removed.
In case of the suggestion of using 'safewrite' instead of write even the
comment for safewrite states that the function needs to be used only in
certain cases.
Remove the blanket exceptions for files and use an exclude string
instead. The only instance where we keep the full file exception is for
src/libvirt-stream.c as there are multiple uses in example code in
comments where I couldn't find a nicer targetted wapproach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the declaration of the struct into 'qemu_monitor_priv.h' as other
code has no business in peeking into the monitor messages.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will remove support for qemu-2.12. Since tests of
'sev' use hacked data we need to use our capability dump of qemu-6.0 as
it has the required fields.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally when I started working on '-blockdev' support I added version
locked variants of all the relevant disk tests locked to qemu-2.12, but
blockdev was finally enabled with qemu-4.2.
This patch bumps the rest of the test cases with no functional changes
related to disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device_id' property was added in qemu-4.0. Since upcoming patch
will be modernizing all disk test cases we specifically want to preserve
the instance of 'device_id' not being used with qemu-3.1 and earlier.
Change the 'disk-cache' and 'disk-shared' cases to have a qemu-3.1 and a
qemu-4.1 version for testing pre-'device_id' and pre-blockdev scenarios.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with qemu-3.0 release we use the 'werror' and 'rerror'
properties with the frontend (device) rather than the storage backend
(with a minor caveat of s390, where we use it earlier as it doesn't
support USB disks, and other disk types supported it earlier).
Add specific test cases after the change, but before '-blockdev' was
enabled.
This is done separately from the changes in the next commit which simply
moves all other disk tests to the last pre-blockdev qemu as we have a
semantic change happening after 2.12.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 'cancel_path' is constructed from the 'tpmdev' argument, we can
push it down into the function opening the FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setup the chardev similarly to how we do it on startup so that virtlogd
is properly used with chardevs which are hotplugged to a VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the function doing the fake setup of chardev backend for FD passing
into the collection of qemu test helpers so that it can be used in
qemumonitorjsontest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The main objective of this patch is to use a proper instance of
virDomainChrSourceDef allocated with the private data.
To achieve this the test cases are grouped into blocks by how much they
fill in the chardev definition. Some test cases are moved around so
that the resulting sequence doesn't need extra clearing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't add the command to the test monitor when we don't expect to invoke
it rather than bypassing the test monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our code uses fdsets for the pipe passed from virtlogd to qemu, but the
chardev hot-unplug code neglected to detach the fdset after the chardev
was removed. This kept the FDs open by qemu even after they were not
used any more.
After the refactor to use qemuFDPass for chardevs we now configure the
'opaque' field for fdsets used for chardevs so we can use
qemuHotplugRemoveFDSet to remove the unused fdset.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the parts which already pass FDs via fdset or directly to use
the new infrastructure.
Apart from simpler code this also adds the appropriate names to the fds
in the fdsets which will allow us to properly remove the fdsets won
hot-unplug of chardevs, which we didn't do for now and resulted in
leaking the FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prefix the file descriptor name with the alias of the network device so
that it's similar to other upcoming use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Code paths which don't wish to use FD passing are supposed to not call
the function which sets up the chardev for FD passing.
This is ensured by calling it only in the host prepare step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test cases for quotes appearing in the netcat parameter,
for the default behavior of proxy=auto where virt-ssh-helper
is used if available, and for proxy=native.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently the test cases all follow the proxy=auto behavior, but
we want to add coverage for other proxy modes as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The important part of the value we assign to "netcat" is that it
contains whitespace, so drop everything else to highlight this
fact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Having the actual script indented and the closing quote on a
separate line, like
sh -c '
if foo; then
bar;
fi
'
makes things more readable and easier to scan visually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make this test case consistent with all the other ones.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Test the behavior of virBufferEscapeShell for different types of
quotes as well as the empty string.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test dumps for x86_64 and ppc64 were generated from pre-release
qemu-3.0-rc1/rc2 and thus wouldn't pass our minimum version check.
As these are very old, fix the version info we use for our check to 3.1
without re-generating them and keep the version tag intact.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'disk-cache' output file is identical in the interesting parts
(everything besides CPU config) to the '-latest' version, so the
versioned invocation can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tests testVirPCIVPDReadVPDBytes and testVirPCIVPDParseFullVPDInvalid
failed to properly close open fildescriptors in some cases. Let's fix it
by switching to VIR_AUTOCLOSE in the whole file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the <loader> had an explicit readonly='no' attribute we
accidentally still marked the plfash as readonly due to the
bad conversion from virTristateBool to bool. This was missed
because the test cases run with no capabilities set and thus
are validated the -drive approach for pflash configuration,
not the -blockdev approach.
This affected the following config:
<os>
<loader readonly='no' type='pflash'>/var/lib/libvirt/qemu/nvram/test-bios.fd</loader>
</os>
for the sake of completeness, we also add a test XML config
with no readonly attribute at all, to demonstrate that the
default for pflash is intended to be r/w.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This change was generated using the following spatch:
@ rule1 @
expression a;
identifier f;
@@
<...
- f(*a);
... when != a;
- *a = NULL;
+ g_clear_pointer(a, f);
...>
@ rule2 @
expression a;
identifier f;
@@
<...
- f(a);
... when != a;
- a = NULL;
+ g_clear_pointer(&a, f);
...>
Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all code using the 'QOM_CPU_PATH' macro to accept the QOM path
as an argument.
For now the new helper for fetching the path 'qemuProcessGetVCPUQOMPath'
will always return the same hard-coded value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As the parent address is part of the mdev nodedev name lets expose the
internally available parent address in the XML.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SmartNIC DPUs may not expose some privileged eswitch operations
to the hypervisor hosts. For example, this happens with Bluefield
devices running in the ECPF (default) mode for security reasons. While
VF MAC address programming is possible via an RTM_SETLINK operation,
trying to set a VLAN ID in the same operation will fail with EPERM.
The equivalent ip link commands below provide an illustration:
1. This works:
sudo ip link set enp130s0f0 vf 2 mac de:ad:be:ef:ca:fe
2. Setting (or clearing) a VLAN fails with EPERM:
sudo ip link set enp130s0f0 vf 2 vlan 0
RTNETLINK answers: Operation not permitted
3. This is what Libvirt attempts to do today (when trying to clear a
VF VLAN at the same time as programming a VF MAC).
sudo ip link set enp130s0f0 vf 2 vlan 0 mac de:ad:be:ef:ca:fe
RTNETLINK answers: Operation not permitted
If setting an explicit VLAN ID results in an EPERM, clearing a VLAN
(setting a VLAN ID to 0) can be handled gracefully by ignoring the
EPERM error with the rationale being that if we cannot set this state
in the first place, we cannot clear it either.
In order to keep explicit clearing of VLAN ID working as it used to
be passing a NULL pointer for VLAN ID is used.
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There should be a way to show no intent in programming a VLAN at all
(including clearing it). This allows handling error conditions
differently when VLAN clearing is explicit (vlan id == 0) vs implicit
(vlanid == NULL - try to clear it if possible).
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This has a benefit of being able to handle error codes for those
operations separately which is useful when drivers allow setting a MAC
address but do not allow setting a VLAN (which is the case with some
SmartNIC DPUs).
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The XML-to-XML test validates that we don't accidentally copy the
isa-debug <serial> into a <console>.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a perfectly valid configuration that we need to keep
working, so add test coverage for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, memory device (def->mems) part of cmd line is
generated before any controller. In majority of cases it doesn't
matter because neither of memory devices live on a bus that's
created by an exposed controller (e.g. there's no DIMM
controller, at least not exposed). Except for virtio-mem and
virtio-pmem, which do have a PCI address. And if it so happens
that the device goes onto non-default bus (pci.0) starting such
guest fails, because the controller that creates the desired bus
wasn't processed yet. QEMU processes arguments in order.
For instance, if virtio-mem has address with bus='0x01' QEMU
refuses to start with the following message:
Bus 'pci.1' not found
Similarly for virtio-pmem. I've successfully tested migration and
changing the order does not affect migration stream.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2047271
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Inside the testPCIVPDResourceCustomCompareIndex() function we
have two variables @a and @b, both marked as g_autoptr(). Then,
towards the end of the function b->value is freed and set to
a->value. This is to make sure
virPCIVPDResourceCustomCompareIndex() works correctly even if
->value member is the same for both arguments.
Nevertheless, if the function returns anything else than 0 then
the control executes subsequent return statement and since
b->value points to the very same string as a->value a double free
will occur. Avoid this by setting b->value to NULL explicitly,
just like we are already doing for the successful path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are a few places where a variable is VIR_FREE()-d and then
explicitly set to NULL. This is not necessary since VIR_FREE()
does that for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since its introduction in
commit 907a39e735
Add a test suite for validating SELinux labelling
this function did not return NULL on OOM.
Since we abort on OOM now, switch testSELinuxMungePath to void,
return NULL explicitly on XML parsing failure and remove
the (now pointless) cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reporting hv-* properties properly requires hv to be enabled,
see qemu commit 071ce4b03b.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are a some scenarios in which we want to prealloc guest
memory (e.g. when requested in domain XML, when using hugepages,
etc.). With 'regular' <memory/> models (like 'dimm', 'nvdimm' or
'virtio-pmem') or regular guest memory it is corresponding
memory-backend-* object that ends up with .prealloc attribute
set. And that's desired because neither of those devices can
change its size on the fly. However, with virtio-mem model things
are a bit different. While one can set .prealloc attribute on
corresponding memory-backend-* object it doesn't make much sense,
because virtio-mem can inflate/deflate on the fly, i.e. change
how big of a portion of the memory-backend-* object is exposed to
the guest. For instance, from a say 4GiB module only a half can
be exposed to the guest. Therefore, it doesn't make much sense to
preallocate whole 4GiB and keep them allocated. But we still want
the part exposed to the guest preallocated (when conditions
described at the beginning are met).
Having said that, with new enough QEMU the virtio-mem-pci device
gained new attribute ".prealloc" which instructs the device to
talk to the memory backend object and allocate only the requested
portion of memory.
Now, that our algorithm for setting .prealloc was isolated in a
single function, the function can be called when constructing cmd
line for virtio-mem-pci device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new capability tracks whether virtio-mem device is capable
of memory preallocation, which is detected by the device having
.prealloc attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to use a hardcoded list of capabilities because we don't
yet have proper replies files obtained from QEMU running on actual
macOS machines.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The new DO_TEST_MACOS() macro makes it possible to create test
cases that verify the behavior of libvirt on a macOS machine
with HVF support available.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This exposes a couple of macOS-specific variants of existing
APIs, which can be used when implementing test programs and
result in HVF support being advertised.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This new enumeration provides a way to specify the host OS
that a specific test case expects. The default is Linux, which
has been the implicit host OS until now; when Linux is selected
as the host OS, KVM support is advertised in capabilies data
exposed to test cases.
This commit doesn't result in any functional change, and simply
sets the stage for introducing macOS host OS support later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When trying to attach vhost-user-blk device to virtual machine using
qemu < 4.2 libvirt would mistakenly add a scsi=off parameter, which is
not supported by qemu.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/265
Signed-off-by: shenjiatong <yshxxsjt715@gmail.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With qemu versions prior to qemu-5.0 we'll format 'scsi=off' for
virtio-blk disks, but also for vhost-user-blk. This is a bug as it's not
supported.
Add a test case to show that wrong configuration is generated by adding
running 'disk-vhostuser' test case on capabilities from qemu-4.2.
For this to be possible it's required to enable shared memory via NUMA
configuration as old QEMU's don't allow configuration of the default
memory backend. This is achieved by adding a copy of the
'disk-vhostuser' XML with NUMA enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
After previous cleanups, the virDomainNetDefParseXML() function
uses a mixture of virXMLProp*() and the old virXMLPropString() +
virXXXTypeFromString() patterns. Rework it so that virXMLProp*()
is used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update existing ppc64 6.2 caps to match what was released in QEMU 6.2.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Changes in all 'ppc64-latest.ags' files were needed due to the
JSONification of command line devices.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Since there's no capability to check now, we can simply move the
formatting of 'max_outputs' earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both are supported by qemu-2.11 and later, so we don't have to check for
them explicitly.
Note that QXL is supported only on x86_64, thus on other arches only the
capability for 'virtio-gpu' is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both the QXL video device and 'virtio' video device support
'max_outputs' in all qemu versions libvirt supports. This means we no
longer have to check the QEMU_CAPS_QXL_MAX_OUTPUTS and
QEMU_CAPS_VIRTIO_GPU_MAX_OUTPUTS capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was only used to construct the hash key for the (now removed)
shared devices in the qemu driver.
Remove it and its mocking.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
No kernels supported by upstream libvirt have the feature.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This device was virtio 1.0-only so adding the (non-)transitional model
did not make sense and it was only present in QEMU 4.0.
Report a validation error for both of the users that will ever hit this
code path.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that looking up dnsmasq is handled/mocked we can start
checking whether dnsmasq capabilities were built successfully and
error out if that wasn't the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
DISCLAIMER: dnsmasq capabilities are empty as of v8.0.0-rc1~145.
In a real environment the dnsmasq capabilities are constructed
using dnsmasqCapsNewFromBinary(). We also have
dnsmasqCapsNewFromBuffer() to bypass checks that real code is
doing and just get capabilities object. The latter is used from
test suite.
However, with a little bit of mocking we can test the real life
code. All that's needed is to simulate dnsmasq's output for
--version and --help and mock a stat() that's done in
dnsmasqCapsRefreshInternal().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While it's true that our virCommand subsystem is happy with
non-absolute paths, the dnsmasq capability code is not. It stores
the path to dnsmasq within and makes it accessible via
dnsmasqCapsGetBinaryPath(). While strictly speaking no caller
necessarily needs canonicalized path, let's find dnsmasq once and
cache the result.
Therefore, when constructing the capabilities structure look up
the binary path. If DNSMASQ already contains an absolute path
then virFindFileInPath() will simply return a copy.
With this code in place, the virFileIsExecutable() check can be
removed from dnsmasqCapsRefreshInternal() because
virFindFileInPath() already made sure the binary is executable.
But introducing virFindFileInPath() means we have to mock it in
test suite because dnsmasqCaps are created in
networkxml2conftest.
Moreover, we don't need to check for dnsmasq in configure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We don't query any capabilities of dnsmasq. We are only
interested in dnsmasq's version (obtained via 'dnsmasq
--version'). Therefore, there's no point in running 'dnsmasq
--help'. Its output is not processed even.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The dnsmasqCaps type has its own cleanup function defined and
ready to use via g_autoptr(). Use automatic cleanup instead of
an explicit one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If a test binary is executed with an argument then usage
information is printed out (that no arguments are accepted and
what environment variables affect execution). The string is
printed onto stderr but it is not terminated with a newline
character producing not so nice output.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that qemu fixed device unplug when JSON syntax is used with -device
we can re-enable the feature.
Since the old capability string representation is condemned by
suggesting filtering it as a workaround we must introduce a new string.
To achieve this the original capability position is renamed to
X_QEMU_CAPS_DEVICE_JSON_BROKEN_HOTPLUG and a new position with the
original name QEMU_CAPS_DEVICE_JSON is introduced to prevent us having
to change the rest of the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to commit v6.2.0-874-g1cd2ad11d3
Notable changes are:
- added flag noting that use of JSON syntax for -device was fixed
- 'dbus' backend for graphics and character devices added
- virtio-mem added 'node' property
- 'clusters' added to CPU topology
- 'open-timeout' property for NBD protocol backend
- 'wheel-left' and 'wheel-right' event types for 'input-send-event'
- increased default resolution to '1280x800' on 'virtio-gpu'
- SGX property 'section-size' changed to 'sections' incompatibly
(unused luckily)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The machine type doesn't change the test result and prevents tests being
changed every time we are about to update real capabilities to a new
qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two tests currently that simulate QMP talk:
qemucapabilitiestest and qemuhotplugtest. In both cases they
check whether currently executed command is the one for which
reply was provided. If not an error message is reported. However,
the error message contains only the actual command and not the
expected one. This makes it harder to navigate through .replies
files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
VM XML accepts target.port but this does not get passed while
building the QEMU command line for this VM.
Signed-off-by: Divya Garg <divya.garg@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit takes care of following cases:
-> Check availability of requested ports.
->The total number of requested ports should not be more than
VIR_MAX_ISA_SERIAL_PORTS.
->The ports requested should be less than VIR_MAX_ISA_SERIAL_PORTS.
->VIR_MAX_ISA_SERIAL_PORTS should correspond to MAX_ISA_SERIAL_PORTS
specified in QEMU code commit def337ffda34d331404bd7f1a42726b71500df22.
-> Prevent duplicate device assignments to the same port.
-> In case no ports are provided in the XML, this patch scans the list of unused
isa-serial indices to automatically assign available ports for this VM.
Signed-off-by: Divya Garg <divya.garg@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When -device is configured via JSON a bug [1] is triggered in qemu were
the DEVICE_DELETED event for the removal of the device frontend is no
longer delivered to libvirt. Without the DEVICE_DELETED event we don't
remove the corresponding entries in the VM XML.
Until qemu will be fixed we must stop using the JSON syntax for -device.
This patch removes the detection of the capability. The capability is
used only during startup of a fresh VM so we don't need to consider any
compaitibility steps for existing VMs.
For users who wish to use 'libvirt-7.9' and 'libvirt-7.10' with
'qemu-6.2' there are two possible workarounds:
- filter out the 'device.json' qemu capability '/etc/libvirt/qemu.conf':
capability_filters = [ "device.json" ]
- filter out the 'device.json' qemu capability via qemu namespace XML:
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
[...]
<qemu:capabilities>
<qemu:del capability='device.json'/>
</qemu:capabilities>
</domain>
We must never again use the same capability name as we are now
instructing users to filter it as a workaround so once qemu is fixed
we'll need to pick a new capability value for it.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2036669
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2035237
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Until now we did 2 weird things when inserting the qemuCaps used for
individual test cases into the capability cache:
1) we inserted the same caps for all emulators
2) we always (expensively) copied them
Now when real capabilities are used we don't touch them at all just
simply inser them. This allows us one big optimization, by trading a
copy for just a virObjectRef as we can borrow the caps object to the
cache.
For fake caps we still copy them as we insert the fake machine types
into them, but second big optimization is to insert the capabilities
only for the architecture they belong to.
Additionally this commit also ensures that all other entries in the
cache for the binary are poisoned by empty caps so that it's obvious
that the test is doing the right thing.
Apart from this making actually more sense this shaves off more than 40%
of runtime from qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Emulator binary change is needed to use the latest caps properly. The
comment is no longer needed, the expected error is recorded in the 'err'
file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Also ensure that the emulator and architecture are correct for
DO_TEST_CAPS_LATEST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As demonstrated by the qemuxml2xmltest DO_TEST_CAPS_LATEST data based on
the 'x86-kvm-32-on-64' test case the post parse CPU selection code which
fills in the CPU into the definition does not have exactly the same
logic as we used to have when the cpu model was picked when formatting
the commandline.
Change the qemuxml2argv test to use DO_TEST_CAPS_LATEST too as it
doesn't really make sense to test this on fake data.
In addition to 'latest' versions, this also adds second invocation
locked to qemu-4.1.0 which demonstrates the old behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fake capabilities are inserted twice, as in a few tests the architecture
is not present in the XML (testing filling in of the architecture).
Since we already know which architecture will be picked we don't need to
be adding the capabilities twice.
This doesn't impact the tests as they use the same approach to determine
the default arch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will modify how we populate the capability cache in
tests to be more sane. This also means that the emulator binary and
architecture used in the test files using real capabilities must match
what the real capabilities have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will modify how we populate the capability cache in
tests to be more saner. This also means that the emulator binary and
architecture used in the test files using real capabilities must match
what the real capabilities have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The specific machine type is not important for the test. We can use 'pc'
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuxml2argv invocation of some tests used DO_TEST_CAPS_LATEST while
the qemuxml2xmltest invocation uses fake caps. Unify them on
DO_TEST_CAPS_LATEST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since introduction in fc03eb53c0 there wasn't a qemuxml2argv
version. As we are touching the files convert them to
DO_TEST_CAPS_LATEST directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to commit 5222256849 the test case was added to verify that
the '<address>' element is covered by the schema. The test was not
registered for qemuxml2argvtest though. We can use 'net-server' instead
as it has the same type. On the other hand that one was not registered
for qemuxml2xmltest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing special about the tests requiring to use very old
machine types. Most usage is cargo-culted from other tests. Switch all
the tests to use 'pc' instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For tests with fake capabilities we fill in a bunch of machine types
which the tests might use. For now there's a random collection of
machine types which are not actually used. Purge the unused ones for
non-x86 machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The two test cases were added to avoid regressions such as fixed in
17dff35848. Nowadays the code is much simpler and any Q35 machine
will trigger the explicit FDC.
Remove the '2.11' machine type version and turn the '2.9' version into a
generic q35 machine.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the fd-passing setup of chardevs which this hack meant to disable
was moved to the host-preparation phase which is skipped for formatting
of non-real commandlines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
And make callers check the return value as well. This helps error out early for
invalid environment variables.
That is desirable because it could lead to deadlocks. This can happen when
resetting logging after fork() reports translated errors because gettext
functions are not reentrant. Well, it is not limited to resetting logging after
fork(), it can be any translation at that phase, but parsing environment
variables is easy to make fail on purpose to show the result, it can also happen
just due to a typo.
Before this commit it is possible to deadlock the daemon on startup
with something like:
LIBVIRT_LOG_FILTERS='1:*' LIBVIRT_LOG_OUTPUTS=1:stdout libvirtd
where filters are used to enable more logging and hence make the race less rare
and outputs are set to invalid
Combined with the previous patches this changes
the following from:
...
<deadlock>
to:
...
libvirtd: initialisation failed
The error message is improved in future commits and is also possible thanks to
this patch.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Set a launch secret in guest memory using the sev-inject-launch-secret
QMP API. Only supported with qemu >= 6.0.0 and SEV-enabled guests in a
paused state.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'sev-inject-launch-secret' qmp command is only available with
qemu >= 6.0.0. Introduce a capability for sev-inject-launch-secret.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There's no real difference between input and output XMLs for
kvm-features and kvm-features-off test cases. Do what we usually
do in such case - turn the output file into a symlink of the
input file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Make the tpm-*.xml files symlinks to their respective input XMLs
from qemuxml2argvdata/ directory. Neither of the XMLs relies on
autofill of any TPM data.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We already have the input xml because of xml2arg test. However,
the corresponding xml2xml test case is missing. Make the expected
XML a symlink to the input XML and clean the latter up a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'qemucapabilitiesnumbering' tool now replaces the role of this
script and provides way to programmatically modify the replies file on
top.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tool is assembled from individual bits used for tests and actual
capturing of the replies files. The tool ensures correct numbering and
formatting of entries.
In normal usage mode it masks as a test which validates formatting and
numbering of the tests/qemucapabilitiesdata/*.replies files. This tool
was actually used to produce commits 096ac87a1a and aa21615ccb.
In case a manual modification of the replies file is needed the
'modify()' function provides a convenient way to do programatic
modification of the caps file.
As an example the modify() function has commented-out code which
provides a basic scaffold to do modifications along with a how-to.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the parser reusable by extracting it and making it parse into
command,reply tuples.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now know exactly which GLib version we need to depend on
for the workaround to no longer be necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
All of these are affected by the same issue as the ones that
we're already skipping during this specific time interval.
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Will keep things reasonable as we perform further code
movements.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
With 'g_strdup' not needing error handling we can ask callers to pass a
copy of the string which will be adopted by the JSON value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
QCOW2 images now support 'extended_l2' which splits the default clusters
into 32 subcluster allocation units. This allows the allocation units to
be smaller without increasing the size of L2 table too much and thus also
the cache requirements for holding the full L2 table in memory.
Unfortunately it's incompatible with qemu versions older than 5.2 thus
can't be used as default.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two functions that take variable arguments:
vshTableNew() and vshTableRowAppend(). Both expect the list of
arguments to be NULL terminated. Annotate them with
G_GNUC_NULL_TERMINATED to enable compile time check for this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In testVshTableNew() we test whether vshTableNew(NULL) allocates
a table. This is expected to fail (and return NULL), because
passing nothing but NULL to vshTableNew() is viewed as error.
Nevertheless, if vshTableNew() did not fail and returned an
allocated table it would be leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous commit, it's no longer possible to change nodeset
for strict numatune. Therefore, we can start generating
host-nodes onto command line again.
This partially reverts d73265af6e.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Under the qemucapabilitiesdata we have a replies file for
QEMU-3.0.0.ppc64. At least we think so. In fact, the file
contains replies from a development snapshot release that
predates 3.0.0 (specifically it's v2.12.0-1689-g518d23a) and as
such does not reflect any change that was made to QEMU after the
snapshot and before the official relase. One of such changes was
renaming 'exit-preconfig' command to 'x-exit-preconfig' (QEMU
commit v3.0.0-rc1~21^2~3). Ideally, we would just regenerate
capabilities using the official release but since this is a PPC64
machine and pretty old version anyway let's just fix the command
name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Set the kernel-hashes property on the sev-guest object if the config
asked for it explicitly. While QEMU machine types currently default to
having this setting off, it is not guaranteed to remain this way.
We can't assume that the QEMU capabilities were generated on an AMD host
with SEV, so we must force set the QEMU_CAPS_SEV_GUEST. This also means
that the 'sev' info in the qemuCaps struct might be NULL, but this is
harmless from POV of testing the CLI generator.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the QEMU tests a test can either use an explicitly listed set of
capabilities, or can request those matching a particular QEMU
version. Sometimes it is desirable to be able to list extra caps
on top of those implied by a particular version.
This is useful, for example, when QEMU won't report certain features
unless it was run on particular hardware or kernels, and those were
not used when a caps snapshot was imported to the libvirt source tree.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This sev-guest object property indicates whether QEMU should
expose the kernel, ramdisk, cmdline hashes to the firmware
for measurement.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A recent code movement introduced a bug which reproduces only when there
are two disks on the same bus missing the target. Improve the test case
for the missing target test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu-6.2 is out, update the caps dump for the final time.
Notable changes:
- 'unstable' feature flag for various QMP schema entries
- 'aio-max-batch' iothread property
- 'kernel-hashes' knob for the 'sev-guest' object
- 'native-hotplug' of 'pcie-root-port' is now unstable again
- 'page-sampling/dirty-ring/dirty-bitmap' mode for 'calc-dirty-rate'
- 'toolsversion' field for the 'vmdk' disk format driver
- CPU changes resulting in 'core-capability' being present on the cpu
of the machine this dump was done on
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Different CPU generations have different limits on the number
of SEV/SEV-ES guests that can be run. Since both limits come
from the same overall set, there is typically also BIOS config
to set the tradeoff betweeen SEV and SEV-ES guest limits.
This is important information to expose for a mgmt application
scheduling guests to hosts.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are limits on the number of SEV/SEV-ES guests that can
be run on machines, which may be influenced by firmware
settings. This is important to expose to users.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're only returning the set of fields needed to perform an
attestation, per the SEV API docs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reduce the scope of the variable to avoid mixing automatic and manual
cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto for dnsmasq context and remove the cmd variable.
It was unused since its introduction in:
commit 8b32c80df0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On QEMU command line it's represented by the dirty-ring-size
attribute of KVM accelerator.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Dirty ring feature was introduced in qemu-6.1.0, this patch
add the corresponding feature named 'dirty-ring', which enable
dirty ring feature when starting VM.
To enable the feature, the following XML needs to be added to
the guest's domain description:
<features>
<kvm>
<dirty-ring state='on' size='xxx'>
</kvm>
</features>
If property "state=on", property "size" must be specified, which
should be power of 2 and range in [1024, 65526].
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the currentBackend (direct vs. firewalld) setting is no longer
used for anything, we don't need to set it (either explicitly from
tests, or implicitly during init), and can completely remove it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It isn't intuitive (to me) that a test just converting xml text into
iptables commands should need to call dbus, so rather than forcing the
next person to look through the commit logs and/or run the test under
gdb to understand why this is needed, just add a short comment in the
source.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Several functions were simplified to remove the only cleanup code at
the cleanup label, making it unnecessary.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When libvirt added support for firewalld, all iptables/ebtables rules
were added via the firewalld "passthrough" API when firewalld was
enabled (the "firewalld backend"), or run directly by libvirt when
firewalld was disabled (the so-called "direct
backend"). virfirewalltest.c dutifully ran each test twice, once with
the each backend enabled.
But commit b19863640d changed the code to *always* directly run
iptables/ebtables commands, and never use the firewalld passthrough
API, effectively making the direct and firewalld backends identical,
except that when libvirt receives notice that firewalld has restarted
or reloaded its rules, the firewalld backend sends an extra "iptables
-V" command via firewalld's passthrough API (and waits for a response)
prior to running all the rest of the iptables commands directly; this
assures that a newly-restarted firewalld has finished its work on the
filter tables before libvirt starts messing with it. (Because this
code is only executed in response to an event from dbus, it isn't
tested in the unit tests).
In spite of this, we still go through all the virfirewall tests twice
though - once for the direct backend, and once for the firewalld
backend, even though these take the same codepath.
In commit b19863640d I had left this double-testing in thinking that
someday we might go back to actually doing something useful with the
firewalld backend in the course of adding support for native nftables,
but I've now realized that for the case of nftables we will be *even
more* divorced from firewalld, so there is really no point in keeping
this code around any longer. (It's likely/probable that the tests will
be done twice again in the future, but it will be enough different
that it is better to remove this code and re-implement from scratch
when adding the nftables backend, rather than trying to directly
modify the existing code and end up with something even more
confusing).
This patch eliminates all the test duplication in virfirewalltest.c,
including mocking dbus, which is unnecessary since none of the tests
use dbus (for now we ensure that by explicitly setting the virfirewall
backend to DIRECT before any of the tests have run. Eventually the
concept of a "firewalld backend" will disappear completely, but that's
for another patch.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Generating command line is pretty easy - just put tb-size=XXX
onto -accel tcg part. Note, that QEMU expects the size in MiB.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/229
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It may come handy to be able to tweak TCG options, in this
specific case the size of translation block cache size (tb-size).
Since we can expect more knobs to tweak let's put them under
common element, like this:
<domain>
<features>
<tcg>
<tb-cache unit='MiB'>128</tb-cache>
</tcg>
</features>
</domain>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After recent cleanups, there are some pointless cleanup sections.
Clean them up.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert all the functions that generate virCaps to use g_auto
and g_steal_pointer.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the backend of the TPM is a chardev we can use the common helper
to instantiate it.
This commit also ensures proper ordering so that the backend chardev is
formatted before it's being referenced.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add handling to qemuDomainDeviceBackendChardevForeachOne and callbacks
so that we can later use 'qemuBuildChardevCommand' for TPM devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the API for qemuBuildChrChardevCommand is sane enough, we can
use it to centralize formatting of '-chardev' generally.
The 'virDomainVideoDef' doesn't use 'virDomainChrSourceDef' internally so
we create it for this occasion manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add handling to qemuDomainDeviceBackendChardevForeachOne and callbacks
so that we can later use 'qemuBuildChardevCommand' for vhost-user disks
instead of a custom formatter.
Since we don't pass the FD for the vhost-user connection to qemu all of
the setup can be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was impossible to use _LATEST when commit d7c814f7f7 was modernizing
the cases as improper separation in the code caused that files were
created in the host during the testsuite run.
Now that the host manipulation when instantiating chardevs is separated
we can add the missing version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the test cases won't cause host modification we can add the
contemporary versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The opening of files for FD passing for a chardev backend was
historically done in the function which is formatting the commandline.
This has multiple problems. Firstly the function takes a lot of
parameters which need to be passed through the commandline formatters.
This made the 'qemuBuildChrChardevStr' extremely unappealing to the
extent that we have multiple other custom formatters in places which
didn't really want to use the function.
Additionally the function is also creating files in the host in certain
configurations which is wrong for a commandline formatter to do. This
meant that e.g. not all chardev test cases can be converted to use
DO_TEST_CAPS_LATEST as we attempt to use such code path and attempt to
create files outside of the test directory.
This patch moves the opening of the filedescriptors from
'qemuBuildChrChardevFileStr' into a new helper
'qemuProcessPrepareHostBackendChardevOne' which is called using
'qemuDomainDeviceBackendChardevForeach'.
To preserve test behaviour we also have another instance
'testPrepareHostBackendChardevOne' which is populating mock
filedescriptors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail at this point. Remove the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail at this point. Remove the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail at this point. Remove the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function isn't used besides tests. Since the separator parsing
capability is trivial we can keep it in place and just unexport it for
now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Forces the data to be written synchronously to both the original and the
mirrored images which ensures that the job will reach synchronized
phase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of calling virDomainDefFree() explicitly, we can annotate
variables with g_autoptr().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'g_clear_pointer(&ptr, g_hash_table_unref)' instead.
In few instances it allows us to also remove explicit clearing of
pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use separate automatically cleared variables for the x86_64 and s390
versions of the QAPI schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Additionally we no longer need the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In other places we use strspn to validate a character subset. Convert
the in-place loop and simplify the error message.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new STRLIM macro and unify it with the empty string check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The domain capabilities won't report TPM support unless SWTPM can be
initialized. To avoid relying on the swtpm install in the host, mock
the entire initialization method, since all it needs todo is return
a non-error value.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reports what TPM features QEMU supports, provided that swtpm is
installed in the host.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit bc24810c2c modified code querying blockstats to use the
'query-nodes' parameter so that we can fetch stats also for images which
are not attached to a frontend such as block copy and backup scratch
images.
Unfortunately that broke the old blockstats because if 'query-nodes' is
enabled qemu doesn't output the 'qdev' parameter which our code used for
matching to the disk and also qemu neglects to populate the frontend
stats at all so we can't even switch to using nodename for matching.
To fix this we need to do two calls, one with 'query-nodes' disabled
using the old logic to populate everything and then an additional one
which populates all the remaining images.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/246
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Erik Skultety <eskultet@redhat.com>
This reads and separates all fields from /proc/<pid>/stat or
/proc/<pid>/task/<tid>/stat as there are easy mistakes to be done in the
implementation. Some tests are added to show it works correctly. No number
parsing is done as it would be unused for most of the fields most, if not all,
of the time. No struct is used for the result as the length can vary (new
fields can be added in the future).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When active snapshot is reverted we stop CPUs in order to load the
snapshot but we never start the CPUs again.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We currently use -machine accel=XXX which is just a syntax sugar
for -accel XXX. The former doesn't allow specifying arguments for
accelerator, because all arguments passed to -machine are
treated as arguments of machine itself.
The -accel argument was introduced in QEMU commit
v2.9.0-rc0~70^2~19 and since our minimum required version is
newer (2.11.0) we can safely assume its existence and use it
without any capability.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/233
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In some cases we have a label that contains nothing but a return
statement. The amount of such labels rises as we use automagic
cleanup. Anyway, such labels are pointless and can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When guest has NUMA nodes and QEMU is new enough to report
default RAM ID then ideally we would use -numa memdev= combined
with memory-backend-* combo becasue -mem-path/-mem-prealloc/-numa
mem are deprecated. Well, there is one problem - the .memdev=
attribute is machine type dependent (just look at arguments of
virQEMUCapsGetMachineNumaMemSupported()) and to ensure backwards
compatibility we prefer -numa mem= over -numa memdev=.
But there was one corner case when -mem-prealloc was requested
but not generated on the cmd line. It all starts with
qemuBuildMemCommandLine() which generates just '-m XXX' and
because it sees defaultRAMid and guest NUMA nodes greater than
zero it does nothing more.
Then, qemuBuildNumaCommandLine() sees that -numa mem= is still
supported for given machine type and nothing else set
@needBackend thus qemuBuildMemPathStr() is called which output
-mem-prealloc only in a few cases assuming it was outputted
earlier.
Reported-by: Jing Qi <jinqi@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This test shows a bug we have: even though the XML says:
<allocation mode='immediate'/>
there is no -mem-prealloc nor .prealloc=yes anywhere on the cmd
line. This will be fixed in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a test case where 'ramfb' is explicitly disabled for a mediated
device to prevent regressing again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test filled the chardev type to VIR_DOMAIN_CHR_TYPE_FILE and thus
set the 'data.emulator.source->data.file.path' pointer, but the
commandline formatter is unconditionally expecting VIR_DOMAIN_CHR_TYPE_UNIX
and thus reading 'data.emulator.source->data.nix.path'. Since it's an
union it happened to land in the correct place. Fix the faked data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainChrSourceDef' contains private data so 'virDomainChrSourceDefNew'
must be used to allocate it. 'virDomainTPMDef' was using it directly
which won't work with the chardev helper functions.
Convert it to a pointer to properly allocate private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 65b0b746b5 changed spice tests to use latest caps. Before this
change, "FLAG_REAL_CAPS" wasn't being set in testQemuInfoInitArgs(). The
absence of this flag triggered the code path inside
testCompareXMLToArgv() that executed testUpdateQEMUCaps(). This function
will update the host CPU via virQEMUCapsUpdateHostCPUModel() into
virQEMUCapsInitHostCPUModel(). In this function,
virQEMUCapsInitCPUModel() would end up updating the hostCPU inside the
qemuCaps (via virQEMUCapsProbeHostCPU()). Before the forementioned
commit, the host CPU was being defaulted to x86_64, vendor Intel, for
the 'graphics-spice-timeout' test that is using the 'pc' machine type
and 'accel=kvm'.
Today, "FLAG_REAL_CAPS" is being set because we're using the latest caps
from x86_64. This means that the whole code path mentioned above is
skipped. qemuCaps are now being loaded via virQEMUCapsLoadCache()
directly. Without the handling being done by testUpdateQEMUCaps(), the
host CPU is being retrieved later on, down below
qemuProcessCreatePretendCmdPrepare() into qemuProcessUpdateGuestCPU().
The latter will attempt to update the domain cpu and executing a
virCPUCompare with the hostCPU and def->cpu.
All this logic ended up causing a failure of the
'graphics-spice-timeout' test in ppc64 and s390x hosts. This test is
being run with KVM acceleration, and the KVM driver for ppc64 and s390x
will return a default x86_64 CPU with vendor "AMD", making
virCPUCompare() fail with the following message:
"QEMU XML-2-ARGV graphics-spice-timeout.x86_64-latest ... libvirt: CPU
Driver error : the CPU is incompatible with host CPU: host CPU vendor does
not match required CPU vendor Intel"
Fix this test by setting cpu check='none' and avoid the virCPUCompare()
that causes the problem for ppc64 and s390x hosts.
Note that this is a build fix. A more adequate fix would be to mock the
getHost() interface of the cpuDriverX86 for non-x86 hosts, allowing
'fullCPU' to be retrieved in qemuProcessUpdateGuestCPU(), and a proper
x86 CPU to be retrieved in the scenario described above.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'-audiodev' as a modern implementation based on QAPI already takes JSON
as the argument. Convert our code to use it directly.
The declaration of the QAPI types can be found in
'qemu.git/qapi/audio.json'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch updates domaincapsdata and qemucapabilitiesdata for ppc64
with qemu commit v6.1.0-1714-gc5b2f55981.
Changes in all 'ppc64-latest.ags' files were needed. The changes are
mundane despite the volume. For all 'ppc64-latest.args' files the
changes are:
- removing '-sandbox' command line;
- 'secret' and 'memory-backend-ram' objects are now using qom-type format;
- '-device' is now using qom-type format.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To make it easier for users to figure out how the DN should be formatted.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This removes a dead link, the need for users to understand a glib function and a
improper reference to fnmatch (as we only expand asterisks to any string).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This commit doesn't aim to extinguish every VIR_FREE() call, but
only those which were touched by the previous commit. The aim is
to drop cleanup/error labels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Instead of calling qemuMonitorTestFree() explicitly, we can use
g_autoptr() and let it be called automagically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are two instances of an explicit call to
qemuMonitorCPUModelInfoFree() which in fact can be turned into
g_auto().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are a few cases where a string list is freed by an explicit
call of g_strfreev(), but the same result can be achieved by
g_atuo(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are two functions (testQemuAgentOSInfo() and
testQemuAgentTimezone()) which call virTypedParamsFree() only in
successful paths. If an error is met then those parameters would
be leaked. Fix this by placing the virTypedParamsFree() calls on
better place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Commit 88957116c9 switched to use
memory-backend-* for regular VM memory as well. That change indirectly
started using 'host-nodes' for system memory which results in QEMU
calling mbind() to bind the system memory to specific NUMA node if the
VM XML contains the configuration similar to this:
...
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
...
Once the VM was started with that configuration it was no longer
possible to change the memory NUMA nodeset.
Fixes: 677c90cc1d
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove unnecessary label and goto. This also fixes a bug where a
failure to create the table would result in the test passing.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove unnecessary label and goto. Cleanup line breaks.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend the TPM backend XML with a node 'active_pcr_banks' that allows a
user to specify the PCR banks to activate before starting a VM. Valid
choices for PCR banks are sha1, sha256, sha384 and sha512. When the XML
node is provided, the set of active PCR banks is 'enforced' by running
swtpm_setup before every start of the VM. The activation requires that
swtpm_setup v0.7 or later is installed and may not have any effect
otherwise.
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'>
<active_pcr_banks>
<sha256/>
<sha384/>
</active_pcr_banks>
</backend>
</tpm>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2016599
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is now unused.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For later QEMUs than 2.11 we do FD passing for character devices,
so lock the capabilites to this exact version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Move the test closer to other graphics-spice tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reduce the churn in following patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The formatter for the backup job data didn't pass the virDomainXMLOption
struct to the disk formatter which meant that the private data of the
disk source were not formatted.
This didn't pose a problem for now as the blockjob list remembered the
nodenames for the jobs, but the backup source lost them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For statically declared arrays one can use G_N_ELEMENTS() instead
of explicit sizeof(array) / sizeof(item). I've noticed couple of
places where the latter was used.
I am not fixing every occurrence because we have some places
which do not use glib (examples and NSS module).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In testPCIVPDResourceCustomCompareIndex() there are two variables
declared at one line. They are both g_autoptr() decorated which
makes it worse, because coccinelle fails to parse that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
This warning is emitted for pretty much every test case,
making it hard to see what the actual error is.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The test case should return -1, not 0 in case a valid resource could
not be parsed successfully but the ret value is initialized to 0.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
While invalid values need to be ignored when presenting VPD data to the
user, it would be good to attempt to parse a valid portion of the VPD
instead of marking it invalid as a whole.
Based on a mailing list discussion, the set of accepted characters is
extended to the set of printable ASCII characters.
https://listman.redhat.com/archives/libvir-list/2021-October/msg01043.html
The particular example encountered on real hardware was multi-faceted:
* "N/A" strings present in read-only fields. This would not be a useful
valid value for a field (especially if a unique serial number is
expected), however, it was decided to delegate handling of those kinds
of values to higher-level software;
* "4W/1W PCIeG2x4" - looks like some vendors use even more printable
characters in the ASCII range than we currently allow. Since the
PCI/PCIe VPD specs mention alphanumeric characters without specifying
the full character set, it looks like this is ambiguous for vendors
and they tend to use printable ASCII characters;
* 0xFF bytes present in VPD-W field values. Those bytes do not map to
printable ASCII code points and were probably used by the vendor as
placeholders. Ignoring the whole VPD because of that would be too
strict.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
* RV and RW fields must be at the last position in their respective
section (per the conditions in the spec). Therefore, the parser now
stops iterating over fields as soon as it encounters one of those
fields and checks whether the end of the resource has been reached;
* The lack of the RW field is not treated as a parsing error since we
can still extract valid data even though this is a PCI/PCIe VPD spec
violation;
* Individual fields must have a valid length - the parser needs to check
for invalid length values that violate boundary conditions of the
resource.
* A zero-length field may be the last one in the resource, however, the
boundary check is currently too strict to allow that.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
There are a lot of places where we call virInterfaceDefFree()
explicitly. We can define autoptr cleanup macro and annotate
declarations with g_autoptr() and remove plenty of those explicit
free calls.
This also fixes a memory leak in udevInterfaceGetXMLDesc() which
called virInterfaceDefFree() only in successful path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Since b2757b697e
(qemu: support kvm-pv-ipi off), libvirt supports xml definition like:
<features>
<kvm>
<pv-ipi state='off'/>
</kvm>
</features>
Add test case for this feature.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
KVM features off test cases should be tested for a KVM domain, so
keep align kvm-features-off test with kvm-features except KVM
features on/off.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting from QEMU-6.2 enum members can be deprecated. Add support to
the validator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the function to the top of the file so other functions placed
towards the top will be able to reuse it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to the new more featured way to report enum members which will
also allow us to detect use of deprecated members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU-6.2 is reporting enum values in the new 'members' array which we'll
be switching to. Rewrite the logic so that adding the new checker is
more straightforward.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v6.1.0-1735-gc52d69e7db which has Markus' patches for
improvements of enum probing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modern cpu hotplug was introduced in qemu-2.7, thus all qemu versions
actually support it. Remove the tests for the legacy hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCapabilitiesAddGuestDomain() function can't fail. It
aborts on OOM. Therefore, there's no need to check for its
return value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCapabilitiesAddGuest() function can't fail. It aborts on
OOM. Therefore, there's no need to check for its return value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For other interface type, values in tc rules are calculated by
multiply by 8*1000 instead of 8*1024.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Error messages must conform to spec as specified here:
https://www.libvirt.org/coding-style.html#error-message-format
This change makes some error messages conform to the spec above.
Fixes: 8eadf82fb5 ("conf: introduce option to enable/disable pci hotplug on pci-root controller")
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This reverts commit 58ba0f6a3d.
Conflict:
* src/qemu/qemu_capabilities.[ch]
Because other new cap flags had been added since the original
commit, reformatting was necessary to follow the "groups of
five" pattern.
* tests.qemucapabilitiesdata/caps_6.2.0.x86_64.xml
This file was added after the original commit that we
are reverting, so had to be manually edited to remove
the two capabilities.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 7300ccc9b3.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit bef0f0d8be.
Conflicts:
tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-disable.args
* this file had been renamed from its original, then renamed back,
which understandably confused git. It's being completely removed
here anyway, so the contents don't matter.
tests/qemuxml2argvtest.c
* change in context around removed chunk
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 2d20f0bb05.
Conflicts:
tests/qemuxml2argvdata/pc-i440fx-acpi-hotplug-bridge-disable.args
tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-disable.args
the test output of these files was regenerated because the tests
were changed upstream to use JSON on the commandline at a later
commit than the commit being reverted here (where they were changed
to use latest caps, but the patches to use JSON on the commandline
hadn't been committed yet).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 6414603105.
Conflicts:
tests/qemuxml2argvdata/pc-i440fx-acpi-hotplug-bridge-enable.x86_64-latest.args
tests/qemuxml2argvdata/pc-i440fx-acpi-root-hotplug-enable.x86_64-latest.args
tests/qemuxml2argvdata/q35-acpi-hotplug-bridge-enable.x86_64-latest.args
These files are unrelated to the functionality we need to remove, so
they weren't removed, and the associated test cases weren't removed
from qemuxml2argvtest.c
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit da896d440c.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This reverts commit 618e8665db.
This is the first in a series of 10 commits that revert (in reverse
order) the changes to add the <acpi-hotplug-bridge state='on|off'/>
switch to libvirt domain XML, which unfortunately needs to be removed
due to QEMU developers discovering a flaw with the design of the QEMU
commandline switch used to implement the libvirt switch that will
likely result in a new and different method of selecting hotplug
modes. Because the libvirt switch has not been in any official
releases of libvirt, we are still able to remove it completely, rather
than deprecating it.
The original commits began with commit
58ba0f6a3d. The other original commit
IDs are documented in each revert commit.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This commit extends libvirt XML configuration to support luks2 encryption format.
This means that <encryption format="luks2" engine="librbd"> becomes valid.
Currently librbd is the only engine that supports this new format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
rbd encryption is new in qemu 6.1.0.
This commit adds a new encryption engine property which
allows the user to use this new encryption engine.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit extends libvirt XML configuration to support a custom encryption engine.
This means that <encryption format="luks" engine="qemu"> becomes valid.
The only engine for now is qemu. However, a new engine (librbd) will be added in an upcoming commit.
If no engine is specified, qemu will be used (assuming qemu driver is used).
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
rbd encryption is new in qemu 6.1.0.
This commit adds capability probing for it.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The post parse callback is part of the real (non-test) processing flow.
This commit adds it (for disks) to the qemublocktest flow as well.
Specifically, this will be needed for tests that use luks encryption,
so that the default encryption engine (which is added in an upcoming commit)
will be overridden by qemu.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a few places we declare a variable (which is optionally
followed by a code not touching it) then set the variable to a
value and return the variable immediately. It's obvious that the
variable is needless and the value can be returned directly
instead.
This patch was generated using this semantic patch:
@@
type T;
identifier ret;
expression E;
@@
- T ret;
... when != ret
when strict
- ret = E;
- return ret;
+ return E;
After that I fixed couple of formatting issues because coccinelle
formatted some lines differently than our coding style.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of "unsupported" test case is to check whether our code
handles 'CommandNotFound' error returned for
'query-migrate-parameters' monitor command. Well, the command is
pretty old and every QEMU that we are dealing with supports it.
Thus this test case is useless. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
* XML serialization and deserialization of PCI VPD;
* PCI VPD capability flags added and used in relevant places;
* XML to XML tests for the added capability.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Add helper functions to virpci to provide means of checking for a VPD
file presence and for VPD resource retrieval using the PCI VPD parser.
The added test assesses the basic functionality of VPD retrieval while
the full parser is tested by virpcivpdtest.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Add support for deserializing the binary PCI/PCIe VPD format and storing
results in memory.
The VPD format is specified in "I.3. VPD Definitions" in PCI specs
(2.2+) and "6.28.1 VPD Format" PCIe 4.0. As section 6.28 in PCIe 4.0
notes, the PCI Local Bus and PCIe VPD formats are binary compatible
and PCIe 4.0 merely started incorporating what was already present in
PCI specs.
Linux kernel exposes a binary blob in the VPD format via sysfs since
v2.6.26 (commit 94e6108803469a37ee1e3c92dafdd1d59298602f) which requires
a parser to interpret.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
These were generated using a QEMU binary built from commit
v6.1.0-1552-g362534a643
Notably, this causes the arguments of -device to be generated
in JSON format.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some guest features that map to the -cpu arg are still added using
implicit syntax "feature" which is a deprecated shorthand for
"feature=on".
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -cpu arg gained support for feature=on|off syntax for the x86
emulator in 2.4.0
commit 38e5c119c2925812bd441450ab9e5e00fc79e662
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Mon Mar 23 17:29:32 2015 -0300
target-i386: Register QOM properties for feature flags
Most other targets gained this syntax even earlier in 1.4.1
commit 1590bbcb02921dfe8e3cf66e3a3aafd31193babf
Author: Andreas Färber <afaerber@suse.de>
Date: Mon Mar 3 23:33:51 2014 +0100
cpu: Implement CPUClass::parse_features() for the rest of CPUs
CPUs who do not provide their own implementation of feature parsing
will treat each option as a QOM property and set it to the supplied
value.
There appears no reason to keep supporting "+|-feature" syntax,
given the current minimum QEMU version.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU switched from using underscores in x86 CPU features to hyphens
in the 2.8.0 series with two commits
commit fc7dfd205f3287893c436d932a167bffa30579c8 (HEAD, refs/bisect/bad)
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:40 2016 -0300
target-i386: Remove underscores from feat_names arrays
commit 54b8dc7c19cd781e96f1e9b001ca6001d804eb19
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:38 2016 -0300
target-i386: Register aliases for feature names with underscores
Libvirt names use underscores so we conditionally tranlate the
names when talking to new QEMU. Since the min QEMU was raised to
version 2.11.0, all QEMU versions we talk to expect hypens, so
the translation can be done unconditionally.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU switched from using underscores in x86 CPU features to hyphens
in the 2.8.0 series with two commits
commit fc7dfd205f3287893c436d932a167bffa30579c8 (HEAD, refs/bisect/bad)
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:40 2016 -0300
target-i386: Remove underscores from feat_names arrays
commit 54b8dc7c19cd781e96f1e9b001ca6001d804eb19
Author: Eduardo Habkost <ehabkost@redhat.com>
Date: Fri Sep 30 15:49:38 2016 -0300
target-i386: Register aliases for feature names with underscores
Libvirt names use underscores so we conditionally tranlate the
names when talking to new QEMU. Since the min QEMU was raised to
version 2.11.0, all QEMU versions we talk to expect hypens, so
the translation can be done unconditionally.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All (proper) callers pass true so we can remove the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we use JSON with -device we can validate it at least partially
(since the schema for 'device_add' is for now incomplete) against the
QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with QEMU-6.2 started accepting a JSON object as argument for
'-device' which will also become the only syntax considered stable by
qemu in the future.
Since libvirt was recently converted to generate the properties via JSON
to begin wit we can start using it on the commandline as well, by simply
enabling the QEMU_CAPS_DEVICE_JSON capability, which we do by probing
for the 'json-cli' feature flag of 'device_add'.
Normally a change which changes a commandline output should be happening
only after the impacted real-caps test files are forked in the version
preceding the change, but in this case it's not necessary as the logic
for generating the device properties stays identical and we just change
the output format (avoid conversion). Additionally we still have a lot
of tests validating the conversion to the old commandline options.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'allowIncomplete' argument of testQEMUSchemaValidateCommand to
validate at least properties which are already described by the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP schema for 'device_add' is not complete yet. Allow validation of
incomplete schema so that we can enable at least some validation. Once
there's more schema in the future all present members are still
validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v6.1.0-1510-gc148a05721 which most notably adds the 'json-cli'
feature for 'device_add' QMP command meaning that -device accepts JSON.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our general pattern is to initialize @ret to -1 and set it to 0
only at the end of a function. Some functions in
objecteventtest.c do not follow this pattern.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The sole purpose of the lifecycleEventCounter_reset() function is
to zero out given lifecycleEventCounter struct. Well, we can let
the compiler zero it out when declaring a variable and just
remove the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
In this commit, add capability flag for query-dirty-rate first.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The aim of virNetSocketNewConnectCommand() is to execute passed
command and attach socket pair/pipe to it so that client socket
can be opened (this is used for connections with alternative
transports, e.g. ssh). The virCommand is created in a caller and
then passed to virNetSocketNewConnectCommand() where it is freed
using virCommandFree(). This approach is wrong on two levels:
1) The deallocation happens on a different level than allocation,
2) There's a WIN32 stub that just reports an error and doesn't
free the command.
However, with g_autoptr() trickery the command can be freed in
caller.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,ats=. Since the property was introduced in QEMU commit
v2.9.0-rc0~162^2~32 we can safely assume the property is always
present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some tests cases in qemuxml2argvtest that aim to check
whether our validator rejects <driver ats=''/> when
QEMU_CAPS_VIRTIO_PCI_ATS capability is not present. Well, such
scenario can't happen really because the capability will always
be present.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,iommu_platform=. Since the property was introduced in
QEMU commit v2.9.0-rc0~162^2~37 we can safely assume the property
is always present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some tests cases in qemuxml2argvtest that aim to check
whether our validator rejects <driver iommu=''/> when
QEMU_CAPS_VIRTIO_PCI_IOMMU_PLATFORM capability is not present.
Well, such scenario can't happen really because the capability
will always be present.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are a few files containing expected output for test cases
that no longer exist. Remove them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The data is based on commit v6.1.0-1313-gc09124dcb8
Notable changes:
- New machine types for the 6.2 cycle were added
- MEM_UNPLUG_ERROR event was deprecated and replaced by
DEVICE_UNPLUG_GUEST_ERROR
- Intel SGX related commands and devices added
- 'copy-before-write' blockdev filter was added
- 'memory-backend-epc' was added
- new cpu flags
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We control only the 'tpmdev' property of TPM devices which is a string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We control the following properties of the devices in question:
'virtio-gpu'
virgl=<bool> - on/off (default: true)
'qxl'
ram_size=<uint32> - (default: 67108864)
vram_size=<uint64> - (default: 67108864)
vram64_size_mb=<uint32> - (default: 4294967295)
vgamem_mb=<uint32> - (default: 16)
max_outputs=<uint16> - (default: 0)
'vhost-user-gpu'
max_outputs=<uint32> - (default: 1)
chardev=<string>
'VGA'
vgamem_mb=<uint32> - (default: 16)
'bochs-display'
vgamem=<size> - (default: 16777216)
common for all devices:
xres=<uint32> - (default: 0)
yres=<uint32> - (default: 0)
The only noticable change is using memory size in bytes for
'bochs-display' instead of kibibytes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the old-style 'device_add' helpers which parse the commandline
arguments to JSON since we now coverted all usage to use JSON directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Build commandlines for character devices via JSON.
For devices using 'VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_SERIAL' address
type 'qemuBuildDeviceAddressProps' will now generate the address. The
only special property is 'nr'. QEMU declares it as:
nr=<uint32> - (default: 4294967295)
The test fallout is caused by formatting addresses as decimal numbers
instead of hex as described in the commit which added
'qemuBuildDeviceAddressProps'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the validation code into a separate function. For now the
validation is still kept in the commandline format step as simply just
moving it to the validator causes failures in the test suite, which will
need to be investigated deeper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally format the PCI controller properties into JSON, but convert
it back to a string so that we for now change just the SCSI controller.
The change in tests is expected as the 'port' field for various PCI
controllers is expected to be a number and thus can't be represented as
a hexadecimal value in JSON.
QEMU expects the following types:
'pci-bridge'
chassis_nr=<uint8> - (default: 0)
'pxb-pcie':
bus_nr=<uint8> - (default: 0)
'pcie-root-port'
port=<uint8> - (default: 0)
chassis=<uint8> - (default: 0)
hotplug=<bool> - (default: true)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally format the SCSI controller properties into JSON, but convert
it back to a string so that we for now change just the SCSI controller.
The change in tests is expected as the 'reg' field for a spapr-vio
address is expected to be a number:
$ qemu-system-ppc64 -device spapr-vscsi,help
spapr-vscsi options:
reg=<uint32> - (default: 4294967295)
The hand-rolled generator used hex representation but that will not be
possible on the monitor via JSON.
The properties of 'virtio-scsi' have following types according to QEMU:
iothread=<link<iothread>>
num_queues=<uint32> - (default: 4294967295)
cmd_per_lun=<uint32> - (default: 128)
max_sectors=<uint32> - (default: 65535)
ioeventfd=<bool> - on/off (default: true)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the bootindex before the address so that the code is simpler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The types for the special fields of the 'virtio-blk-pci' according to
QEMU are:
iothread=<link<iothread>>
ioeventfd=<bool> - on/off (default: true)
event_idx=<bool> - on/off (default: true)
scsi=<bool> - on/off (default: false)
num-queues=<uint16> - (default: 65535)
queue-size=<uint16> - (default: 256)
For all disks we also use the following properties (based on 'scsi-hd'):
device_id=<str>
share-rw=<bool> - (default: false)
drive=<str> - Node name or ID of a block device to use as a backend
chardev=<str> - ID of a chardev to use as a backend <- vhost-user-blk-pci
bootindex=<int32>
logical_block_size=<size> - A power of two between 512 B and 2 MiB (default: 0)
physical_block_size=<size> - A power of two between 512 B and 2 MiB (default: 0)
wwn=<uint64> - (default: 0)
rotation_rate=<uint16> - (default: 0)
vendor=<str>
product=<str>
removable=<bool> - on/off (default: false)
write-cache=<OnOffAuto> - on/off/auto (default: "auto")
cyls=<uint32> - (default: 0)
heads=<uint32> - (default: 0)
secs=<uint32> - (default: 0)
bios-chs-trans=<BiosAtaTranslation> - Logical CHS translation algorithm, auto/none/lba/large/rechs (default: "auto") <- ide-hd
serial=<str>
werror=<BlockdevOnError> - Error handling policy, report/ignore/enospc/stop/auto (default: "auto")
rerror=<BlockdevOnError> - Error handling policy, report/ignore/enospc/stop/auto (default: "auto")
The 'wwn' field is changed from a hex string to a number since qemu
actually treats it as a number.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'deflate-on-oom' and 'free-page-reporting' before the address
to simplify the genrator code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Merge the code from qemuBuildVirtioOptionsStr so that we don't have to
call two separate functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The same test in regards to the 'panic' device is the 'panic-double'
case, thus panic-isa can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The returned argument list is a NULL-terminated string list and the only
caller doesn't use the count. Remove the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prevent duplication of code when extending the validator for new
commands. Add a struct describing a command to validate and make the
validation loop a bit more robust to corner cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The -netdev formatter code switched to a real virQEMUCaps flag so we can
remove the old flags which used to enable JSON for -netdev for
validation purposes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base the validation on presence of JSON as we do with other validated
commands. This will prepare the code for a refactor so that it's the
same for all validated commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 58ba0f6a3d added a capability which
is supported by all qemu versions we support. Remove it and the
associated dead code. Since the capability isn't present in any upstream
release we can delete it completely.
Specifically the commit itself states that it was introduced "around
(qemu) 2.1". The rest of the code handles properly that the feature is
used only on x86 with the i440fx machine so the capability is pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have input files for those, provide also xml2argv testing since we
have them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use real example configs to prove the support without the
need for using fake capabilities. Fix the recently added test cases.
The negative case for 'pc-i440fx-acpi-hotplug-bridge-disable' is removed
completely as there is no real qemu libvirt supports which wouldn't
have the capability.
The input file for the negative test on aarch64 is modified so that it's
actually a reasonably valid VM config.
Fixes: bef0f0d8be
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use two real example configs to prove the support without the
need for using fake capabilities. Fix the recently added test cases.
Fixes: 133d7983d6
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This change adds backend qemu command line support for new libvirt
global feature 'acpi-bridge-hotplug'. This option can be used as
following:
<feature>
<pci>
<acpi-bridge-hotplug state='off|on'/>
</pci>
</feature>
The '<pci>' sub-element under '<feature>' is also newly introduced.
'acpi-bridge-hotplug' turns on the following command line option to
qemu for x86 guests:
(pc): -global PIIX4_PM.acpi-pci-hotplug-with-bridge-support=<off|on>
(q35): -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=<off|on>
This change also adds the required qemuxml2argv unit tests in order to
test correct qemu arguments. Unit tests have also been added to test
qemu capability validation checks as well as checks for using this
option with the right architecture.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This change introduces a new libvirt sub-element <pci> under
<features> that can be used to configure all pci related features.
Currently the only sub-sub element supported by this sub-element is
'acpi-bridge-hotplug' as shown below:
<features>
<pci>
<acpi-bridge-hotplug state='on|off'/>
</pci>
</features>
The above option is only available for the QEMU driver, for x86 guests
only. It is a global option, affecting all PCI bridge controllers on
the guest.
The 'acpi-bridge-hotplug' option enables or disables ACPI hotplug
support for cold-plugged pci bridges. Examples of bridges include the
PCI-PCI bridge (pci-bridge controller) for pc (i440fx) machinetypes,
or PCIe-PCI bridges and pcie-root-port controllers for q35
machinetypes.
For pc machinetypes in x86, this option has been available in QEMU
since version 2.1. Please see the following changes in qemu repo:
9e047b982452c6 ("piix4: add acpi pci hotplug support")
133a2da488062e ("pc: acpi: generate AML only for PCI0 devices if PCI
bridge hotplug is disabled")
For q35 machinetypes, this was introduced in QEMU 6.1 with the
following changes in qemu repo:
(a) c0e427d6eb5fef ("hw/acpi/ich9: Enable ACPI PCI hot-plug")
(b) 17858a16950860 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on
Q35")
The reasons for enabling ACPI based hotplug for PCIe (q35) based
machines (as opposed to native hotplug) are outlined in (b). There are
use cases where users would still want to use native
hotplug. Therefore, this config option enables users to choose either
ACPI based hotplug or native hotplug for bridges (for example for pcie
root port controller in q35 machines).
Qemu capability validation checks have also been added along with
related unit tests to exercise the new conf option.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
qemu added support for i440fx specific global boolean flag
PIIX4_PM.acpi-pci-hotplug-with-bridge-support
around version 2.1. This flag is enabled by default. When disabled, it
turns off acpi pci hotplug for cold plugged pci bridges in i440fx
machine types.
Very recently, in qemu version 6.1, the same global option was also
added for q35 machine types as well.
ICH9-LPC.acpi-pci-hotplug-with-bridge-support
This option turns on or off acpi based hotplug for cold plugged pcie
bridges like pcie root ports. This flag is also enabled by
default. Please refer to the following qemu changes:
c0e427d6eb5fef ("hw/acpi/ich9: Enable ACPI PCI hot-plug")
17858a16950860 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
This patch adds the corresponding qemu capabilities in libvirt. For
i440fx, the capability is detected as
QEMU_CAPS_PIIX_ACPI_HOTPLUG_BRIDGE. For q35, the capability is
detected as QEMU_CAPS_ICH9_ACPI_HOTPLUG_BRIDGE.
Please note that the test specific qemu capabilities .replies files
has already been updated as a part of regular refreshing them when a
new qemu version is released. Hence, no updates to those files are
required.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
Reconstruct the socket path from priv->libDir in every user.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The mocked path in the test suite is not in sync with what libvirtd
generates.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The commit adding the vhost-user-fs device forgot to format
the device's alias on the command line.
Thankfully it was not needed yet because virtiofs migration
is not yet supported, but it will be needed in the future
to allow hot(un)plug.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability name piix4-acpi-root-hotplug-en is not conventional and
appreared to be confusing to some. "en" suffix is also incorrect as the
capability in qemu is used to both enable and disable hotplug on the pci root
bus on the i440fx. Hence, rename it to piix4.acpi-root-pci-hotplug so that it
is clearer, less confusing and more accurate.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This change adds qemu backend command line support for enabling or disabling
hotplug on the pci-root controller using the 'target' sub-element of the
pci-root controller as shown below:
<controller type='pci' model='pci-root'>
<target hotplug='off'/>
</controller>
'<target hotplug='off/on'/>' is only valid for pc (i440fx-based x86)
machinetypes and turns on the following command line option that is passed
to qemu for x86 guests:
-global PIIX4_PM.acpi-root-pci-hotplug=<off/on>
Before introduction of this attribute, hotplug was always enabled for
pci-root of an i440fx-based machinetype, and since its introduction
the default setting has always been "on" for those machinetypes.
This change also adds the required qemuxml2argv unit tests in order to test
correct qemu arguments. Unit tests have also been added to test qemu capability
validation checks.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This change introduces libvirt xml support to enable/disable hotplug on the
pci-root controller. It adds a 'target' subelement for the pci-root controller
with a 'hotplug' property. This property can be used to enable or disable
hotplug for the pci-root controller. For example, in order to disable hotplug
on the pci-root controller, one has to use set '<target hotplug='off'>' as
shown below:
<controller type='pci' model='pci-root'>
<target hotplug='off'/>
</controller>
'<target hotplug='on'>' option would enable hotplug for pci-root controller.
This is also the default value. This option is only available for pc machine
types and is applicable for qemu/kvm accelerator only.This feature was
introduced from qemu version 5.2 with the following change in qemu repository:
3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus")
The above qemu commit describes some reasons why users might to disable hotplug
on PCI root buses.
Related unit tests to exercise the new conf option has also been added.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The following change in qemu added support for a global boolean flag specific
to i440fx machines that would turn off or on acpi based hotplug for pci root
bus:
3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus")
The option is passed as "-global PIIX4_PM.acpi-root-pci-hotplug=on" etc in qemu
commandline. It is enabled by default. This patch adds the corresponding qemu
capabilities in libvirt as QEMU_CAPS_PIIX_ACPI_ROOT_PCI_HOTPLUG.
Please note that the test specific qemu capabilities .replies files has already
been updated as a part of regular refreshing them when a new qemu version is
released. Hence, no updates to those files are required.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
Nothing special is happening here. All important changes were
done when for 'virtio-pmem' (adjusting the code to put virtio
memory on PCI bus, generating alias using
qemuDomainDeviceAliasIndex(). The only bit that might look
suspicious is no prealloc for virtio-mem. But if you think about
it, the whole purpose of this device is to change amount of
memory exposed to guest on the fly. There is no point in locking
the whole backend in memory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtio-mem is paravirtualized mechanism of adding/removing
memory to/from a VM. A virtio-mem-pci device is split into blocks
of equal size which are then exposed (all or only a requested
portion of them) to the guest kernel to use as regular memory.
Therefore, the device has two important attributes:
1) block-size, which defines the size of a block
2) requested-size, which defines how much memory (in bytes)
is the device requested to expose to the guest.
The 'block-size' is configured on command line and immutable
throughout device's lifetime. The 'requested-size' can be set on
the command line too, but also is adjustable via monitor. In
fact, that is how management software places its requests to
change the memory allocation. If it wants to give more memory to
the guest it changes 'requested-size' to a bigger value, and if it
wants to shrink guest memory it changes the 'requested-size' to a
smaller value. Note, value of zero means that guest should
release all memory offered by the device. Of course, guest has to
cooperate. Therefore, there is a third attribute 'size' which is
read only and reflects how much memory the guest still has. This
can be different to 'requested-size', obviously. Because of name
clash, I've named it 'current' and it is dealt with in future
commits (it is a runtime information anyway).
In the backend, memory for virtio-mem is backed by usual objects:
memory-backend-{ram,file,memfd} and their size puts the cap on
the amount of memory that a virtio-mem device can offer to a
guest. But we are already able to express this info using <size/>
under <target/>.
Therefore, we need only two more elements to cover 'block-size'
and 'requested-size' attributes. This is the XML I've came up
with:
<memory model='virtio-mem'>
<source>
<nodemask>1-3</nodemask>
<pagesize unit='KiB'>2048</pagesize>
</source>
<target>
<size unit='KiB'>2097152</size>
<node>0</node>
<block unit='KiB'>2048</block>
<requested unit='KiB'>1048576</requested>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</memory>
I hope by now it is obvious that:
1) 'requested-size' must be an integer multiple of
'block-size', and
2) virtio-mem-pci device goes onto PCI bus and thus needs PCI
address.
Then there is a limitation that the minimal 'block-size' is
transparent huge page size (I'll leave this without explanation).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks whether memory-backend-* supports .reserve
attribute which is going to be important for backends associated
with virtio-mem devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This commit introduces a new capability that reflects virtio-mem-pci
device support in QEMU:
QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI, /* -device virtio-mem-pci */
The virtio-mem-pci device was introduced in QEMU 5.1.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
New virHostMemGetTHPSize() is introduced which allows caller to
obtain THP PMD (Page Middle Directory) size, which is equal to
the minimal size that THP can use, taken from kernel doc
(Documentation/admin-guide/mm/transhuge.rst):
Some userspace (such as a test program, or an optimized memory allocation
library) may want to know the size (in bytes) of a transparent hugepage::
cat /sys/kernel/mm/transparent_hugepage/hpage_pmd_size
Since this size depends on the host architecture and the kernel
it won't change whilst libvirtd is running. Therefore, we can use
virOnce() and cache the value. Of course, we can be running under
kernel that has THP disabled or has no notion of THP at all. In
that case a negative value is returned to signal error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that it's no longer used, remove probing for it
and mark it as deprecated.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU added the capability to disable file transfers via spice in commit
5ad24e5f3b ("spice: Add -spice disable-agent-file-transfer cmdline
option (rhbz#961850)") released in qemu-v1.6.0 and the option can't be
disabled.
Remove the unnecessary validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As with previous test replace the fake caps versions with a combination
of DO_TEST_CAPS_VER(..., "2.11.0") and DO_TEST_CAPS_LATEST().
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the code is refactored add the DO_TEST_CAPS_LATEST versions as
promised in the commit adding the pinned versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions now use the new commandline parser
functions, thus we can remove the old-style commandline generator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the 3 unix socket tests with real caps versions to demonstrate
that supported qemus no longer use the old syntax.
DO_TEST_CAPS_LATEST versions will be added later.
This also removes duplicate invocation of 'graphics-vnc-socket'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The switch to QemuOpts parser which brought the long-form options
happened in qemu commit 4db14629c3 ("vnc: switch to QemuOpts, allow
multiple servers") released in v2.3.0.
We can always assume this capability and remove the old-style
generators.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'tls-creds-x509' object is always registered even when qemu is built
without gnutls for all supported qemu versions. This means we cannot
probe for its support and thus simplify the code using TLS.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the fake caps invocation with invocation binding it to the
oldest supported qemu version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The filesystem commandline doesn't differ in the '-latest' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real caps instead of fake caps for the legacy cases. This will also
show us when we can remove the old-style code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modern QEMUs don't support the machine type at all. Remove it from our
fake caps generator too and adjust test cases which depend on it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
