The bus type IDE being enum Zero, the bus type on pseries system appears as IDE for all the -hda/-cdrom and for disk drives with if="none" type. Pseries platform needs this to appear as SCSI instead of IDE. The ide being not supported, the explicit requests for ide devices will return an error.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
The RNG grammar did not allow arbitrary interleaving, which makes
it harder than necessary to create a new volume from handwritten XML.
(Compare also to commit caf516db for pools).
* docs/schemas/storagevol.rng: Support interleaving.
* tests/storagevolxml2xmlin/vol-file-backing.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
$ touch /var/lib/libvirt/images/'a<b>c'
$ virsh pool-refresh default
$ virsh vol-dumpxml 'a<b>c' default | head -n2
<volume>
<name>a<b>c</name>
Oops. That's not valid XML. And when we fix the XML
generation, it fails RelaxNG validation.
I'm also tired of seeing <key>(null)</key> in the example
output for volume xml; while we used NULLSTR() to avoid
a NULL deref rather than relying on glibc's printf
extension behavior, it's even better if we avoid the issue
in the first place. But this requires being careful that
we don't invalidate any storage backends that were relying
on key being unassigned during virStoragVolCreateXML[From].
I would have split this into two patches (one for escaping,
one for avoiding <key>(null)</key>), but since they both
end up touching a lot of the same test files, I ended up
merging it into one.
Note that this patch allows pretty much any volume name
that can appear in a directory (excluding . and .. because
those are special), but does nothing to change the current
(unenforced) RelaxNG claim that pool names will consist
only of letters, numbers, _, -, and +. Tightening the C
code to match RelaxNG patterns and/or relaxing the grammar
to match the C code for pool names is a task for another
day (but remember, we DID recently tighten C code for
domain names to exclude a leading '.').
* src/conf/storage_conf.c (virStoragePoolSourceFormat)
(virStoragePoolDefFormat, virStorageVolTargetDefFormat)
(virStorageVolDefFormat): Escape user-controlled strings.
(virStorageVolDefParseXML): Parse key, for use in unit tests.
* src/storage/storage_driver.c (storageVolCreateXML)
(storageVolCreateXMLFrom): Ensure parsed key doesn't confuse
volume creation.
* docs/schemas/basictypes.rng (volName): Relax definition.
* tests/storagepoolxml2xmltest.c (mymain): Test it.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/storagepoolxml2xmlin/pool-dir-naming.xml: New file.
* tests/storagepoolxml2xmlout/pool-dir-naming.xml: Likewise.
* tests/storagevolxml2xmlin/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-*.xml: Fix fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
These changes allow the correct virtio-blk-device and virtio-net-device
devices to be used for the 'virt' machine type for armv7 rather than the
PCI virtio devices.
A test case was added to qemuxml2argvtest for this change.
Signed-off-by: Clark Laughlin <clark.laughlin@linaro.org>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* tests/sysinfotest.c: Consistently use commas.
* tests/viratomictest.c: Likewise.
* tests/vircgroupmock.c: Likewise.
* tools/virsh-domain.c: Likewise.
* tools/virsh-volume.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In the 730af8f2cd commit we are fixing broken qemu startup on systems
with ancient qemu. This commit introduces the regression test for that
specific case to make sure we don't break it again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Report the error in virPortAllocatorAcquire instead
of doing it in every caller.
The error contains the port range name instead of the intended
use for the port, e.g.:
Unable to find an unused port in range 'display' (65534-65535)
instead of:
Unable to find an unused port for SPICE
This also adds error reporting when the QEMU driver could not
find an unused port for VNC, VNC WebSockets or NBD migration.
While trying to compare netfs against my new gluster pool, I
discovered two things:
virt-xml-validate chokes on valid xml produced by 'virsh pool-dumpxml'
[yet another reason that ALL patches that add new xml should be adding
corresponding tests]
When using glusterfs FUSE mounts, you cannot access a subdirectory
of a gluster volume. The recommended workaround in the gluster
community is to mount the volume to an intermediate location, then
bind-mount the desired subdirectory to the final location. Maybe
we should teach libvirt to do bind-mounting, but for now I chose to
just document the limitation.
* docs/storage.html.in: Improve documentation.
* docs/schemas/storagepool.rng (sourcefmtnetfs): Allow all
formats, and drop redundant info-vendor.
* tests/storagepoolxml2xmltest.c (mymain): New test.
* tests/storagepoolxml2xmlin/pool-netfs-gluster.xml: New file.
* tests/storagepoolxml2xmlout/pool-netfs-gluster.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The QOM path in qemu that contains the CPUID registers of a running VM
may not be present (introduced in QEMU 1.5).
Since commit d94b781771 we have a regression with QEMU that don't
support reporting of the CPUID register state via the monitor as the
process startup code expects the path to exist.
This patch adds code that checks with the monitor if the requested path
already exists and uses it only in this case.
https://bugzilla.redhat.com/show_bug.cgi?id=1027096
If there's the following snippet in the domain XML, the domain will be
lost upon the daemon restart (if the domain is started prior restart):
<seclabel type='dynamic' relabel='yes'/>
The problem is, the 'label', 'imagelabel' and 'baselabel' are parsed
whenever the VIR_DOMAIN_XML_INACTIVE is *not* present or the label is
static. The latter is not our case, obviously. So, when libvirtd starts
up, it finds domain state xml and parse it. During parsing, many XML
flags are enabled but VIR_DOMAIN_XML_INACTIVE. Hence, our parser tries
to extract 'label', 'imagelabel' and 'baselabel' from the XML which
fails for model='none'. Err, this model - even though not specified in
XML - can be taken from qemu wide config file: /etc/libvirtd/qemu.conf.
However, in order to know we are dealing with model='none' the code in
question must be moved forward a bit. Then a new check must be
introduced. This is what the first two chunks are doing.
But this alone is not sufficient. The domain state XML won't contain the
model attribute without slight modification. The model should be
inserted into the XML even if equal to 'none' and the state XML is being
generated - what if the origin (the @security_driver variable in
qemu.conf) changes during libvirtd restarts?
At the end, a test to catch this scenario is introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The linux kernel recently added support for paravirtual spinlock
handling to avoid performance regressions on overcomitted hosts. This
feature needs to be turned in the hypervisor so that the guest OS is
notified about the possible support.
This patch adds a new feature "paravirt-spinlock" to the XML and
supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in
qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1008989
The qemu monitor supports retrieval of actual CPUID bits presented to
the guest using QMP monitor. Add APIs to extract these information and
tests for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since 21685c955e we have tests/virpcitestdata dir containing the PCI
config files for some dummy PCI devices that are used int virpcitest.
However, the directory containing the config files is not distributed
making 'make rpm' fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This addition, however, requires some refactoring to be done. First of
all, to match the best practice we should detach the device prior
resetting it. That's why testVirPCIDeviceDetach is detaching all devices
within 0000:00:01.0 and 0000:00:03.0 range. Then, the brand new test
will reset the 0000:00:02.0 device, so the last testVirPCIDeviceReattach
can reattach all the devices back.
In order to perform a PCI device reset, the dummy config file is not
sufficient anymore and must be replaced with real PCI config (binary
mess). Such config files are to be stored under tests/virpcitestdata/
and ought to have '.config' suffix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the pci_driver_new function it is possible to set a list of
<vendor:device> IDs that the driver knows. These IDs are passed as
variable arguments and are processed the usual way using va_start() and
va_arg(). However, after all arguments has been processed, we should
call va_end() what we aren't currently doing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This commit introduces yet another test under virpcitest:
virPCIDeviceDetach. However, in order to be able to do this, the
virpcimock needs to be extended to model the kernel behavior on PCI
device binding and unbinding (create 'driver' symlinks under the device
tree, check for device ID in driver's ID table, etc.)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Among with this test introduce virpcimock as we need to mock some
syscalls, e.g. redirect open() of a file under /sys/bus/pci to a
stub sysfs tree.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To make it easier to forbid future attempts at a confusing typedef
name ending in Ptr that isn't actually a pointer, insist that we
follow our preferred style of 'typedef foo *fooPtr'.
* cfg.mk (sc_forbid_const_pointer_typedef): Enforce consistent
style, to prevent issue fixed in previous storage patch.
* src/conf/capabilities.h (virCapsPtr): Fix offender.
* src/security/security_stack.c (virSecurityStackItemPtr):
Likewise.
* tests/qemucapabilitiestest.c (testQemuDataPtr): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Expand the "secmodel" XML fragment of "host" with a sequence of
baselabel's which describe the default security context used by
libvirt with a specific security model and virtualization type:
<secmodel>
<model>selinux</model>
<doi>0</doi>
<baselabel type='kvm'>system_u:system_r:svirt_t:s0</baselabel>
<baselabel type='qemu'>system_u:system_r:svirt_tcg_t:s0</baselabel>
</secmodel>
<secmodel>
<model>dac</model>
<doi>0</doi>
<baselabel type='kvm'>107:107</baselabel>
<baselabel type='qemu'>107:107</baselabel>
</secmodel>
"baselabel" is driver-specific information, e.g. in the DAC security
model, it indicates USER_ID:GROUP_ID.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We want to treat 'attach-disk --shareable' as an undocumented
alias for 'attach-disk --mode=shareable'. By improving our
alias handling, we can allow all such --bool -> --opt=value
replacements, and guarantee up front that the alias is not
mixed with its replacement.
* tools/virsh.c (vshCmddefOptParse, vshCmddefGetOption): Add
support for expanding bool alias to --opt=value.
(opts_echo): Add another alias to test it.
* tests/virshtest.c (mymain): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, if access(path, mode) is invoked, we check if @path has this
special prefix SYSFS_PREFIX. If it does, we modify the path a bit and
call realaccess. If it doesn't we act just like a wrapper and call
realaccess directly. However, we are mocking fopen() as well. And as one
can clearly see there, fopen("/proc/cgroups") will succeed. Hence, we
have an error in our mocked access(): We need to check whether @path is
not equal to /proc/cgroups as it may not exists on real system we're
running however we definitely know how to fopen() it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As stated in the comment above introduction of the lv_abs_top_builddir
variable, older automake doesn't provide abs_top_builddir variable.
Hence, we are creating our own one with lv_ prefix. However, when
exporting env variables to the tests, the variables are not evaluated
but only substituted. Hence:
LIBVIRT_DRIVER_DIR="$(abs_top_builddir)/src/.libs"
is set to "/src/.libs" with old automake (even though we *think* we've
set the $abs_top_builddir variable just a few line above).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
virCommandAddEnvPassAllowSUID
virCommandAddEnvPassBlockSUID
And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The RNG grammar did not allow arbitrary interleaving, which makes
it harder than necessary to create a new pool from handwritten XML.
* docs/schemas/storagepool.rng: Allow interleaving.
* tests/storagepoolxml2xmlin/pool-sheepdog.xml: Test interleave.
* tests/storagepoolxml2xmlin/pool-iscsi-auth.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Implement the bare minimal sysinfo for AArch64 platforms by
reading the CPU models from /proc/cpuinfo.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Introduced by commit 3f029fb531 the RPM build
was broken due to a missing LXC textcase.
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
The vmx file parsing code was reporting errors when parsing floppy.fileName
entries if the filename didn't end in .flp. There is no such restriction in
ESX; even using the GUI to configure floppy filenames you can specify any
arbitrary file with any extension.
Fix by changing the vmx parsing code so that it uses the floppy.fileType
value to determine whether floppy.fileName refers to a block device or a
regular file.
Also remove code that would have generated an error if no floppy.fileName
was specified. This is not an error either.
Updated the floppy tests in vmx2xmltest.c and xml2vmxtest.c.
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in the testsuite.
* tests/cputest.c (cpuTestCompareXML): Use intended type.
* tests/qemucapabilitiestest.c (testQemuCaps): Likewise.
* tests/qemumonitorjsontest.c: Drop const.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up virhash to provide a const-correct interface: all actions
that don't modify the table take a const table. Note that in
one case (virHashSearch), we actually strip const away - we aren't
modifying the contents of the table, so much as associated data
for ensuring that the code uses the table correctly (if this were
C++, it would be a case for the 'mutable' keyword).
* src/util/virhash.h (virHashKeyComparator, virHashEqual): Use
intended type.
(virHashSize, virHashTableSize, virHashLookup, virHashSearch):
Make const-correct.
* src/util/virhash.c (virHashEqualData, virHashEqual)
(virHashLookup, virHashSize, virHashTableSize, virHashSearch)
(virHashComputeKey): Fix fallout.
* src/conf/nwfilter_params.c
(virNWFilterFormatParameterNameSorter): Likewise.
* src/nwfilter/nwfilter_ebiptables_driver.c
(ebiptablesFilterOrderSort): Likewise.
* tests/virhashtest.c (testHashGetItemsCompKey)
(testHashGetItemsCompValue): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The log message regex has been
[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug|info|warning|error :
The precedence of '|' is high though, so this is equivalent to matching
[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug
Or
info
Or
warning
Or
error :
Which is clearly not what it should have done. This caused the code to
skip over things which are not log messages. The solution is to simply
add brackets.
A test case is also added to validate correctness.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This function takes exactly one argument: an address to check.
It returns true, if the address is an IPv4 or IPv6 address in numeric
format, false otherwise (e.g. for "examplehost").
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, we're unit testing some basic functions and some (so called)
simple functions (e.g. "qmp_capabilities", "system_powerdown"). However,
there are more functions which expect simple "{'return': {}}" reply, but
takes more args to construct the command (for instance "set_link"). This
patch aims on such functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Prefer using VFIO (if available) to the legacy KVM device passthrough.
With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
Since 76b644c when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>
This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.
The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.
This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.
Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.
Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
The following XML is the recommended default clock configuration for
qemu:
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
However we weren't testing any of those timer elements.
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current OOM test impl is too inefficient to be used on the
large test suites. It loops running 'main' multiple times, once
for each alloc in the 'main' method. This has complexity
'n * (n + 1) / 2' in terms of total alloc count. It will be
replaced by a more efficient impl whicih runs individual test
cases instead. This will have same complexity but the values
of 'n' will be much smaller, so a net win.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuxml2xmltest.c function testCompareXMLToXMLHelper would
clobber the 'ret' variable causing it to mis-diagnose OOM
errors.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemumonitorjsontest.c: In function 'testQemuMonitorJSONqemuMonitorJSONGetBalloonInfo':
qemumonitorjsontest.c:1134: warning: integer constant is too large for 'long' type
* tests/qemumonitorjsontest.c
(testQemuMonitorJSONqemuMonitorJSONGetBalloonInfo)
(testQemuMonitorJSONqemuMonitorJSONGetBlockStatsInfo): Use correct
type.
Signed-off-by: Eric Blake <eblake@redhat.com>
I tried to test ./configure --without-lxc --without-remote.
First, the build failed with some odd errors, such as an
inability to build xen, or link failures for virNetTLSInit.
But when you think about it, once there is no remote code,
all of libvirtd is useless, any stateful driver that depends
on libvirtd is also not worth compiling, and any libraries
used only by RPC code are not needed. So I patched
configure.ac to make for some saner defaults when an
explicit disable is attempted. Similarly, since we have
migrated virnetdevbridge into generic code, the workaround
for Linux kernel stupidity must not depend on stateful
drivers being in use.
Then there's 'make check' that needs segregation.
Wow - quite a bit of cleanup to make --without-remote useful :)
* configure.ac: Let --without-remote toggle defaults on stateful
drivers and other libraries. Pick up Linux kernel workarounds
even when qemu and lxc are not being compiled.
* tests/Makefile.am (test_programs): Factor out programs that
require remote.
* src/libvirt_private.syms (rpc/virnet*.h): Move...
* src/libvirt_remote.syms: ...into new file.
* src/Makefile.am (SYM_FILES): Ship new syms file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Join the worker thread no matter if it is running or zombie already.
With current implementation the thread is joined iff @running is true.
However, when worker executes the last line, @running is set to false.
Hence qemuMonitorTestFree() won't join it (and free resources) even
though we can clearly see worker has run (nobody else sets @running =
false).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Right now, we are testing qemuMonitorSystemPowerdown instead of
qemuMonitorJSONSystemPowerdown. It makes no harm, as both functions have
the same header and the former is just a wrapper over the latter. But we
should be consistent as we're testing the JSON functions only in here.
This test is there to ensure that our capabilities detection code isn't
broken somehow.
How to gather test data:
Firstly, the data is split into two separate files. The former (with
suffix .replies) contains all the qemu replies. This is very fragile as
introducing a new device can mean yet another monitor command and hence
edit of this file in the future. But there's no better way of doing
this. To get this data simply turn on debug logs and copy all the
QEMU_MONITOR_IO_PROCESS lines. But be careful to not copy incomplete
ones (yeah, we report some incomplete lines too). Long story short, at
the libvirtd startup, a dummy qemu is spawn to get all the capabilities.
The latter (with suffix .caps) contains capabilities XML. Just start a
domain and copy the corresponding part from its state XML file.
Including <qemuCaps> tag.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In a few cases we might want to not care if monitor command executed on
the mocked monitor matches the one we have reply for. Sounds crazy, but
if we just want monitor to return certain values (e.g. read from a file)
there is no need to care about command match.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, when creating a new mocked monitor, the greeting can't be
chosen. This is crucial for next patches, because some info as qemu
version is obtained in the greeting message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The problem is described by [0] but its effect on libvirt is that
starting a container with a full distro running systemd after having
stopped it simply fails.
The container cleanup now calls the machined Terminate function to make
sure that everything is in order for the next run.
[0]: https://bugs.freedesktop.org/show_bug.cgi?id=68370
Currently, we have functions to handle fc_host implemented just
for linux. On all other platforms an error is thrown. It makes no
sense to run the test on those platforms then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 297c99a5 an invalid source definition XML of a character
device that is used as backend for RNG devices, smartcards and redirdevs
causes crash of the daemon when parsing such a definition.
The device types mentioned above are not a part of a regular character
device but are backends for other types. Thus when parsing such device
NULL is passed as the argument @chr_def. Later when checking the
validity of the definition @chr_def was dereferenced when parsing a UNIX
socket backend with missing path of the socket and crashed the daemon.
Sample offending configuration:
<devices>
...
<rng model='virtio'>
<backend model='egd' type='unix'>
<source mode='bind' service='1024'/>
</backend>
</rng>
</devices>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1012196
The virnetmessagetest code did not check for failure to
allocate the message object. This lead to a crash on OOM
in the test suite.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virportallocatortest did not check if the object
allocation failed in all cases. This lead to a crash
on OOM in the testsuite
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virbuftest code did not check virBufferError before
accessing the buffer contents, resulting in a crash on
OOM conditions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainChrSourceDef variable should be memset to
0, so that the cleanup block does not free uninitialized
data on OOM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuMonitorCommonTestInit method did not allocate the
test object, so it should not free it upon failure. Doing
so causes a double free with the caller.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For inexplicable reasons, the nwfilter XML parser is intentionally
ignoring errors that arise during parsing. As well as meaning that
users don't get any feedback on their XML mistakes, this will lead
it to silently drop data in OOM conditions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The vmx2xmltest test would print all errors to stderr, which
is not helpful when running OOM tests, and differs from the
behaviour of other tests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The testCompareXMLToXMLHelper method clobbered the 'ret' variable
in several places leading to a failure to report OOM errors from
the test suite.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The methods for obtaining the Xen dom ID cannot distinguish
between returning -1 due to an error and returning -1 due to
the domain being shutoff. Change them to return the dom ID
via an output parameter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves one of the issues listed in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
00:1E.0 is the location of this controller on at least some actual Q35
hardware, so we try to replicate the placement. The bridge should work
just as well in any other location though, so if 00:1E.0 isn't
available, just allow it to be auto-assigned anywhere appropriate.
This resolves one of the issues in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
This device is identical to qemu's "intel-hda" device (known as "ich6"
in libvirt), but has a different PCI device ID (which matches the ID
of the hda audio built into the ich9 chipset, of course). It's not
supported in earlier versions of qemu, so it requires a capability
bit.
The testutils.c file had some fprintfs which had not been
converted from %d to %zu, when 'testCounter' change to be
a size_t. This was a build breaker if --enable-test-oom
was enabled
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Start a test case for the virNetServerClient object, which
initially checks the creation of a virIdentityPtr object.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This splits up the version parsing code into a callable API like QEMU
help/version string parsing so that we can test it as we need to add
additional patterns for newer versions/products.
