History has shown that there are frequent bugs in the QEMU driver
code leading to the monitor being invoked with a NULL pointer.
Although the QEMU driver code should always report an error in
this case before invoking the monitor, as a safety net put in a
generic check in the monitor code entry points.
* src/qemu/qemu_monitor.c: Safety net to check for NULL monitor
object
Any method which intends to invoke a monitor command must have
a check for virDomainObjIsActive() before using the monitor to
ensure that priv->mon != NULL.
There is one subtle edge case in this though. If a method invokes
multiple monitor commands, and calls qemuDomainObjExitMonitor()
in between two of these commands then there is no guarentee that
priv->mon != NULL anymore. This is because the QEMU process may
exit or die at any time, and because qemuDomainObjEnterMonitor()
releases the lock on virDomainObj, it is possible for the background
thread to close the monitor handle and thus qemuDomainObjExitMonitor
will release the last reference allowing priv->mon to become NULL.
This affects several methods, most notably migration but also some
hotplug methods. This patch takes a variety of approaches to solve
the problem, depending on the particular usage scenario. Generally
though it suffices to add an extra virDomainObjIsActive() check
if qemuDomainObjExitMonitor() was called during the method.
* src/qemu/qemu_driver.c: Fix multiple potential NULL pointer flaws
in usage of the monitor
* src/qemu/qemu_driver.c (qemudDomainSetVcpus): Upon look-up failure,
i.e., vm==NULL, goto cleanup, rather than to "endjob", superficially
since the latter would dereference vm, but more fundamentally because
we certainly don't want to call qemuDomainObjEndJob before we've
even attempted qemuDomainObjBeginJob.
(gdb) p/x QEMUD_CMD_FLAG_VNET_HOST
$7 = 0xffffffff80000000
Oops - that meant we were incorrectly setting QEMU_CMD_FLAG_RTC_TD_HACK
for qemu-kvm-0.12.3 (and probably botching a few other settings as well).
Fixes Red Hat BZ#592070
* src/qemu/qemu_conf.h (QEMUD_CMD_FLAG_VNET_HOST): Avoid sign
extension.
* tests/qemuhelpdata/qemu-kvm-0.12.3: New file.
* tests/qemuhelptest.c (mymain): Add another case.
A fedora translator filed:
https://bugzilla.redhat.com/show_bug.cgi?id=580816
Pointing out these two error messages as unclear: "write save" sounds
like a typo without context, and lack of a colon made the second message
difficult to parse.
virFileResolveLink was returning a positive value on error,
thus confusing callers that assumed failure was < 0. The
confusion is further evidenced by callers that would have
ended up calling virReportSystemError with a negative value
instead of a valid errno.
Fixes Red Hat BZ #591363.
* src/util/util.c (virFileResolveLink): Live up to documentation.
* src/qemu/qemu_security_dac.c
(qemuSecurityDACRestoreSecurityFileLabel): Adjust callers.
* src/security/security_selinux.c
(SELinuxRestoreSecurityFileLabel): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.
qemuReadLogOutput early VM death detection is racy and won't always work.
Startup then errors when connecting to the VM monitor. This won't report
the emulator cmdline output which is typically the most useful diagnostic.
Check if the VM has died at the very end of the monitor connection step,
and if so, report the cmdline output.
See also: https://bugzilla.redhat.com/show_bug.cgi?id=581381
* src/qemu/qemu_driver.c (qemudDomainSetVcpus): Avoid NULL-deref
upon unknown UUID. Call qemuDomainObjBeginJob(vm) only after
ensuring that vm != NULL, not before. This potential NULL-deref
was introduced by commit 2c555d87b0.
The code specifies driver->cacheDir as the format string,
but it usually doesn't contain '%s', so the subsequent
argument, "/qemu.mem.XXXXXX", is always ignored.
The patch fixes the misuse.
Setting dynamic_ownership=0 in /etc/libvirt/qemu.conf prevents
libvirt's DAC security driver from setting uid/gid on disk
files when starting/stopping QEMU, allowing the admin to manage
this manually. As a side effect it also stopped setting of
uid/gid when saving guests to a file, which completely breaks
save when QEMU is running non-root. Thus saved state labelling
code must ignore the dynamic_ownership parameter
* src/qemu/qemu_security_dac.c: Ignore dynamic_ownership=0 when
doing save/restore image labelling
When QEMU runs with its disk on NFS, and as a non-root user, the
disk is chownd to that non-root user. When migration completes
the last step is shutting down the QEMU on the source host. THis
normally resets user/group/security label. This is bad when the
VM was just migrated because the file is still in use on the dest
host. It is thus neccessary to skip the reset step for any files
found to be on a shared filesystem
* src/libvirt_private.syms: Export virStorageFileIsSharedFS
* src/util/storage_file.c, src/util/storage_file.h: Add a new
method virStorageFileIsSharedFS() to determine if a file is
on a shared filesystem (NFS, GFS, OCFS2, etc)
* src/qemu/qemu_driver.c: Tell security driver not to reset
disk labels on migration completion
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_stacked.c,
src/security/security_selinux.c, src/security/security_driver.h,
src/security/security_apparmor.c: Add ability to skip disk
restore step for files on shared filesystems.
The cgroups ACL code was only allowing the primary disk image.
It is possible to chain images together, so we need to search
for backing stores and add them to the ACL too. Since the ACL
only handles block devices, we ignore the EINVAL we get from
plain files. In addition it was missing code to teardown the
cgroup when hot-unplugging a disk
* src/qemu/qemu_driver.c: Allow backing stores in cgroup ACLs
and add missing teardown code in unplug path
QEMU is gaining a new monitor command netdev_add for hotplugging
NICs using the netdev backend code. We already support this on
the command this, though it is disabled. This adds support for
hotplug too, also to remain disabled until 0.13 QEMU is released
* src/qemu/qemu_driver.c: Support netdev hotplug for NICs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
support for netdev_add and netdev_remove commands
When closing a monitor using qemuMonitorClose(), we are aware of
the possibility the monitor is still being used somewhere:
/* NB: ordinarily one might immediately set mon->watch to -1
* and mon->fd to -1, but there may be a callback active
* that is still relying on these fields being valid. So
* we merely close them, but not clear their values and
* use this explicit 'closed' flag to track this state */
but since we call virEventAddHandle() on that monitor without increasing
its ref counter, the monitor is still freed which makes possible users
of it quite unhappy. The unhappiness can lead to a hang if qemuMonitorIO
tries to lock mutex which no longer exists.
With the introduction of the generic qemu device model, unplugging
SCSI disks works like a charm, so support it in libvirt.
* src/qemu/qemu_driver.c: Add qemudDomainDetachSCSIDiskDevice() to do the
unplugging, extend qemudDomainDetachDeviceAdd().
Signed-off-by: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Support for live migration between hosts that do not share storage was
added to qemu-kvm release 0.12.1.
It supports two flags:
-b migration without shared storage with full disk copy
-i migration without shared storage with incremental copy (same base image
shared between source and destination).
I tested the live migration without shared storage (both flags) for native
and p2p with and without tunnelling. I also verified that the fix doesn't
affect normal migration with shared storage.
WIN32 is always defined when __MINGW32__ is defined, but the
converse is not true. WIN32 is more generic, if someone were
to ever attempt porting to a microsoft compiler. This does
not affect Cygwin, which intentionally does not define WIN32.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Use more
generic flag macro.
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD)
(virStorageBackendRunProgRegex): Likewise.
* tools/console.h (vshRunConsole): Likewise.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON
This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
const char *reason,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
When using -device syntax, the IO event will have a different
prefix, 'drive-' that needs to be skipped over before matching
against the libvirt disk alias
* src/qemu/qemu_driver.c: Skip QEMU_DRIVE_HOST_PREFIX in IO event
This defines the internal driver API and stubs out each driver
* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver
qemuDomainPCIAddressSetFree was freeing up the hash
table for the pci addresses, but not freeing up the addr
structure. Looking over the callers of this function, it
seems like they expect it to also free up the structure,
so do that here.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The previous commit changes a goto from 'endjob' to 'cleanup',
leaving the endjob label unused. Remove it to avoid compile
warning.
* src/qemu/qemu_driver.c: Remove 'endjob' label
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): When setting
"vm" to NULL, jump over vm-dereferencing code to "cleanup".
(qemuDomainRevertToSnapshot): Likewise.
In cases where the security driver failed to restore a label after a
guest has saved, we mistakenly jumped to the error cleanup paths.
This is not good, because the operation has in fact completed and
cannot be rolled back completely. Label restore is non-critical, so
just log the problem instead. Also add a missing restore call in
the error cleanup path
* src/qemu/qemu_driver.c: Fix handling of security driver
restore failures in QEMU domain save
When cgroups is enabled, access to block devices is likely to be
restricted to a whitelist. Prior to saving a guest to a block device,
it is necessary to add the block device to the whitelist. This is
not required upon restore, since QEMU reads from stdin
* src/qemu/qemu_driver.c: Add block device to cgroups whitelist
if neccessary during domain save.
The save process was relying on use of the shell >> append
operator to ensure the save data was placed after the libvirt
header + XML. This doesn't work for block devices though.
Replace this code with use of 'dd' and its 'seek' parameter.
This means that we need to pad the header + XML out to a
multiple of dd block size (in this case we choose 512).
The qemuMonitorMigateToCommand() monitor API is used for both
save/coredump, and migration via UNIX socket. We can't simply
switch this to use 'dd' since this causes problems with the
migration usage. Thus, create a dedicated qemuMonitorMigateToFile
which can accept an filename + offset, and remove the filename
from the current qemuMonitorMigateToCommand() API
* src/qemu/qemu_driver.c: Switch to qemuMonitorMigateToFile
for save and core dump
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Create
a new qemuMonitorMigateToFile, separate from the existing
qemuMonitorMigateToCommand to allow handling file offsets
It is possible to use block devices with domain save/restore. Upon
failure QEMU unlinks the path being saved to. This isn't good when
it is a block device !
* src/qemu/qemu_driver.c: Don't unlink block devices if save fails
If a transient QEMU crashes during save attempt, then the virDomainPtr
object may be freed. If a persistent QEMU crashes during save, then
the 'priv->mon' field is no longer valid since it will be inactive.
* src/qemu/qemu_driver.c: Fix two crashes when QEMU exits
during a save attempt
In particular I was forgetting to take the qemuMonitorPrivatePtr
lock (via qemuDomainObjBeginJob), which would cause problems
if two users tried to access the same domain at the same time.
This patch also fixes a problem where I was forgetting to remove
a transient domain from the list of domains.
Thanks to Stephen Shaw for pointing out the problem and testing
out the initial patch.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
With JSON qemu monitor, we get a STOP event from qemu whenever qemu
stops guests CPUs. The downside of it is that vm->state is changed to
PAUSED and a new generic paused event is send to applications. However,
when we ask qemu to stop the CPUs we are not really interested in qemu
event and we usually want to issue a more specific event.
By setting vm->status to PAUSED before actually sending the request to
qemu (and resetting it back if the request fails) we can ignore the
event since the event handler does nothing when the guest is already
paused. This solution is quite hacky but unfortunately it's the best
solution which I was able to come up with and it doesn't introduce a
race condition.
While doing some testing of the snapshot code I noticed that
if qemuDomainSnapshotLoad failed, it would print a NULL as
part of the error. That's not desirable, so leave the
full_path variable around until after we are done printing
errors.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
It's not needed and is currently ignored, but this is a bug.
It will get fixed soon and QMP will return an error for keys
it doesn't know about, this will break libvirt.
* src/qemu/qemu_monitor_json.c: remove qemuMonitorJSONCommandAddTimestamp()
and the place where it's invoked in qemuMonitorJSONMakeCommand()
* The error messages coming from qemu's DAC support contain strings
from the original SELinux security driver code. This just removes
references to "security context" and other SELinux-isms from the DAC
code.
Signed-off-by: Spencer Shimko <sshimko@tresys.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The hang fix in d376b7d63e was incomplete
since it left quite a few {Enter,Exit}Monitor calls which require driver
to be unlocked. Since the driver is locked throughout the whole
function, {Enter,Exit}MonitorWithDriver need to be used instead to
ensure driver is not locked when issuing monitor commands.
The comment in qemuDomainWaitForMigrationComplete says we are polling
every 50ms but the code sleeps only for 50us. This was already discussed
during review but apparently forgotten when the series was pushed.
The text monitor code was checking for a '\n' prefix on several
places. Previously this would work, but since the monitor code
re-write the '\n' is already stripped off, so mustn't be checked
for.
* src/qemu/qemu_monitor_text.c: Fix monitor error checking
Probably as a result of a merge error, the CPU hotplug command
names were completely wrong.
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Fix
the CPU hotplug command names
Adds ability to provide a preferred CPU model for CPUID data decoding.
Such model would be considered as the best possible model (if it's
supported by hypervisor) regardless on number of features which have to
be added or removed for describing required CPU.
So far, when CPUID data were converted into CPU model and features, the
features can only be added to the model. As a result, when a guest asked
for something like "qemu64,-svm" it would get a qemu32 plus a bunch of
additional features instead.
This patch adds support for removing feature from the base model.
Selection algorithm remains the same: the best CPU model is the model
which requires lowest number of features to be added/removed from it.
Qemu committed a patch which list some CPU names in [] when asked for
supported CPUs (qemu -cpu ?). Yet, it needs such CPUs to be passed
without those square braces. When probing for supported CPU models, we
can just strip the square braces and pretend we have never seen them.
First, inital VCPU pinning is set correctly but then it is reset by
assigning qemu process to a new cgroup (which contains all CPUs). It's
easily fixed by swapping these two actions.
The initial boot of VMs uses -device for NICs where available. The
corresponding monitor command is device_add, but the network hotplug
code was still using device_del by mistake.
* src/qemu/qemu_driver.c: Use device_add for NIC hotplug where
available
If either of the getfd or host_net_add monitor commands return
any text, this indicates an error condition. Don't ignore this!
* src/qemu/qemu_monitor_text.c: Report errors for getfd and
host_net_add
The 'device_del' command expects a parameter called 'id' but we
were passing 'config'.
* src/qemu/qemu_monitor_json.c: Fix device_del command parameter
Disk devices in QEMU have two parts, the guest device and the host
backend driver. Historically these two parts have had the same
"unique" name. With the switch to using -device though, they now
have separate names. Thus when changing CDROM media, for guests
using -device syntax, we need to prepend the QEMU_DRIVE_HOST_PREFIX
constant
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add helper function
qemuDeviceDriveHostAlias() for building a host backend alias
* src/qemu/qemu_driver.c: Use qemuDeviceDriveHostAlias() to determine
the host backend alias for performing eject/change commands in the
monitor
The device_add command was added in JSON mode in a way I didn't
expect. Instead of passing the normal device string to the JSON
command:
{ "execute": "device_add", "arguments": { "device": "ne2k_pci,id=nic.1,netdev=net.1" } }
We need to split up the device string into a full JSON object
{ "execute": "device_add", "arguments": { "driver": "ne2k_pci", "id": "nic.1", "netdev": "net.1" } }
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Rename the
qemuCommandLineParseKeywords method to qemuParseKeywords
and export it to monitor
* src/qemu/qemu_monitor_json.c: Split up device string into
a JSON object for device_add command
The parameter for the qemuMonitorDeviceDel() is a device alias,
not a device config string. Rename the parameter reflect this
and avoid confusion to readers.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Rename devicestr to devalias in qemuMonitorDeviceDel()
The QEMU developers have stated that they will not be porting
the commands 'pci_add', 'pci_del', 'usb_add', 'usb_del' to the
JSON mode monitor, since they're obsoleted by 'device_add'
and 'device_del'. libvirt has (untested) code that would have
supported those commands in theory, but since we already use
device_add/del where available, there's no need to keep the
legacy stuff anymore.
The text mode monitor keeps support for all commands for sake
of historical compatability.
* src/qemu/qemu_monitor_json.c: Remove 'pci_add', 'pci_del',
'usb_add', 'usb_del' commands
The QEMU driver is mistakenly calling directly into the text
mode monitor for the domain memory stats query.
* src/qemu/qemu_driver.c: Replace qemuMonitorTextGetMemoryStats with
qemuMonitorGetMemoryStats
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add the new
wrapper for qemuMonitorGetMemoryStats
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
qemuMonitorJSONGetMemoryStats implementation
Instead of reporting VIR_ERR_INTERNAL_ERROR use the more specific
VIR_ERR_CONFIG_UNSUPPORTED
* src/qemu/qemu_conf.c: Report VIR_ERR_CONFIG_UNSUPPORTED for
unsupported video adapters
To avoid race-conditions, the tear down of a filter has to happen before
the tap interface disappears and another tap interface with the same
name can re-appear. This patch tries to fix this. In one place, where
communication with the qemu monitor may fail, I am only tearing the
filters down after knowing that the function did not fail.
I am also moving the tear down functions into an include file for other
drivers to reuse.
* src/qemu/qemu_driver.c (qemudDomainAttachSCSIDisk):
Initialize "cont" to NULL, so clang knows it's set.
Add an sa_assert so it knows it's non-NULL when dereferenced.
In a couple of cases typos meant we were firing the wrong type
of event. In the python code my previous commit accidentally
missed some chunks of the code.
* python/libvirt-override-virConnect.py: Add missing python glue
accidentally left out of previous commit
* src/conf/domain_event.c, src/qemu/qemu_monitor_json.c: Fix typos
in event name / method name to invoke
Currently when we attempt to change the cdrom in a qemu VM the monitor
doesn't generate an error if the target filename doesn't exist. I've
submitted a patch[1] for this. This patch is the libvirt qemu-driver
side which catches the error message from the monitor and reportes the
error to libvirt. This means that virsh attach-disk cdrom commands
won't appear to succeed when qemu change command actually failed.
* src/qemu/qemu_monitor_text.c: in qemuMonitorTextChangeMedia() look
for failure to access the new data
When qemu libvirt driver doesn't support guest CPU selection with given
qemu binary, guests requiring specific CPU should fail to start instead
of being silently supplied with a default CPU.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Initialize "logfile"
to ensure that we don't use it uninitialized -- thus closing an
arbitrary file descriptor -- in the cleanup block.
When starting up qemu VNC autoport guests, we were
only looking through ports 5900 to 6000, meaning we
were limited to 100 total clients. Increase that
limit to 65535 (the last available port), so we can
have up to 59635 VNC autoport guests.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The images are saved in /var/lib/libvirt/qemu/save/
and named $domainname.save . The directory is created appropriately
at daemon startup. When a domain is started while a saved image is
available, libvirt will try to load this saved image, and start the
domain as usual in case of failure. In any case the saved image is
discarded once the domain is created.
* src/qemu/qemu_conf.h: adds an extra save path to the driver config
* src/qemu/qemu_driver.c: implement the 3 new operations and handling
of the image directory
virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.
* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
adds the new entry points virDomainManagedSave(),
virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
src/opennebula/one_driver.c src/openvz/openvz_driver.c
src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/xen/xen_driver.c: add corresponding new internal drivers entry
points
The clock timer XML is being updated in the following ways (based on
further off-list discussion that was missed during the initial
implementation):
1) 'wallclock' is changed to 'track', and the possible values are 'boot'
(corresponds to old 'host'), 'guest', and 'wall'.
2) 'mode' has an additional value 'smpsafe'
3) when tickpolicy='catchup', there can be an optional sub-element of
timer called 'catchup':
<catchup threshold=123 slew=120 limit=10000/>
Those three values are all longs, always optional, and if they are present,
they are positive. Internally, 0 indicates "unspecified".
* docs/schemas/domain.rng: updated RNG definition to account for changes
* src/conf/domain_conf.h: change the C struct and enums to match changes.
* src/conf/domain_conf.c: timer parse and format functions changed to
handle the new selections and new element.
* src/libvirt_private.syms: *TimerWallclock* changes to *TimerTrack*
* src/qemu/qemu_conf.c: again, account for Wallclock --> Track change.
virFileReadLimFD is a poor fit for reading the header
of the restore file. The problem is that virFileReadLimFD
returns an error when there is more data after the amount
you ask to read, but that is *expected* in this case.
This patch is essentially a revert of
1a4d5c9543, but I don't think
that commit does what it says anyway. It purports to prevent
an unwarranted OOM error, but since virFileReadLimFD will
allocate memory up to the maximum anyway, the upper limit
on the total amount of memory allocated is the same for either
the old version or the new version. Since the old saferead
actually works and virFileReadLimFD does not, revert to
using saferead.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When a watchdog/IO error occurs, one of the possible actions that
QEMU might take is to pause the guest. In this scenario libvirt
needs to update its internal state for the VM, and emit a
lifecycle event:
VIR_DOMAIN_EVENT_SUSPENDED
with a detail being one of:
VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
VIR_DOMAIN_EVENT_SUSPENDED_WATCHDOG
To future proof against possible QEMU support for multiple monitor
consoles, this patch also hooks into the 'STOPPED' event in QEMU
and emits a generic VIR_DOMAIN_EVENT_SUSPENDED_PAUSED event
* include/libvirt/libvirt.h.in: Add VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
* src/qemu/qemu_driver.c: Update VM state to paused when IO error
or watchdog events occurrs
* src/qemu/qemu_monitor_json.c: Fix typo in disk IO event name
virStrToLong* guarantees (via strtol) that the end pointer will be set
to the point at which parsing stopped (even on failure, this point is
the start of the input string).
* src/esx/esx_driver.c (esxGetVersion): Remove pointless
conditional.
* src/qemu/qemu_conf.c (qemuParseCommandLinePCI)
(qemuParseCommandLineUSB, qemuParseCommandLineSmp): Likewise.
* src/qemu/qemu_monitor_text.c
(qemuMonitorTextGetMigrationStatus): Likewise.
Since the timers are defined to cover all possible config cases for
several different hypervisors, many of these possibilities generate an
error on qemu. Here is what is currently supported:
RTC: If the -rtc commandline option is available, allow setting
"clock=host"
or "clock=vm" based on the rtc timer clock='host|guest' value. Also
add "driftfix=slew" if the tickpolicy is 'catchup', or add nothing
if
tickpolicy is 'delay'. (Other tickpolicies will raise an error).
If -rtc isn't available, but -rtc-td-hack is, add that option
if the tickpolicy is 'catchup', add -rtc-td-hack, if it is 'delay'
add nothing, and if it's anything else, raise an error.
PIT: If -no-kvm-pit-reinjection is available, and tickpolicy is
'delay', add that option. if tickpolicy is 'catchup', do
nothing. Anything else --> raise an error.
If -no-kvm-pit-reinjection *isn't* available, but -tdf is, when
tickpolicy is 'catchup' add -tdf. If it's 'delay', do
nothing. Anything else --> raise an error.
If neither of those commandline options is available, and
tickpolicy is anything other than 'delay' (or unspecified), raise
an error.
HPET: If -no-hpet flag is available and present='no', add -no-hpet.
If -no-hpet is not available, and present='yes', raise an error.
If present is unspecified, the default is to do whatever this
particular qemu does by default, so don't raise an error.
All other timer types are unsupported by QEMU, so they will raise an
error.
* src/qemu/qemu_conf.c: extend qemuBuildClockArgStr() to generate the
command line arguments for the new options
* src/qemu/qemu_conf.h: define 4 new flags
* src/qemu/qemu_conf.c: check the help text of qemu for presence of
features indicated by each flag.
* tests/qemuhelptest.c: add appropriate flags into the masks for each test
The QEMU cpu affinity is used in NUMA scenarios to ensure that
guest memory is allocated from a specific node. Normally memory
is allocate on demand in vCPU threads, but when using hugepages
the initial thread leader allocates memory upfront. libvirt was
not setting affinity of the thread leader, or I/O threads. This
patch changes the code to set the process affinity in between
the fork()/exec() of QEMU. This ensures that every single QEMU
thread gets the affinity
* src/qemu/qemu_driver.c: Set affinity on entire QEMU process
at startup
Right now this implements only 2 basic hooks:
- before the qemu process is being launched
- after the qemu process is terminated
the XML description of the domain is passed to the hook script stdin
/etc/libvirt/hook/qemu
* src/qemu/qemu_driver.c: implement synchronous script hooks for QEmu
at domain startup and end
This flag is used in migration prepare step to send updated XML
definition of a guest.
Also ``virsh dumpxml --update-cpu [--inactive] guest'' command can be
used to see the updated CPU requirements.
When a domain is defined on host1, migrated to host2 and then migrated
back to host1, its current configuration would overwrite the libvirtd's
in-memory copy of persistent configuration of that domain. This is not
desired as we want to preserve the persistent configuration untouched.
This patch introduces new 'live' parameter to virDomainAssignDef.
Passing 'true' for 'live' means the configuration passed to
virDomainAssignDef describes a configuration of live instance of the
domain. This applies for saved domains which are being restored or for
incoming domains during migration.
All callers have been changed to pass the appropriate value.
* Fixes per feedback from Dan and Daniel
* Added test datafiles
* Re-disabled JSON flags
* Added code to print the error policy attribute when generating XML
* Re-add empty tag
Add support for Qemu to have firewall rules applied and removed on VM
startup and shutdown respectively. This patch also provides support for
the updating of a filter that causes all VMs that reference the filter
to have their ebtables/iptables rules updated.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
To find out where the net type 'direct' needs to be handled I introduced
the 'enum virDomainNetType' in the virDomainNetDef structure and let the
compiler tell me where the case statement is missing. Then I added the
unhandled device statement to the UML driver.
* src/conf/domain_conf.h: change _virDomainNetDef type from int to
virDomainNetType enum
* src/conf/domain_conf.c src/lxc/lxc_driver.c src/qemu/qemu_conf.c
src/uml/uml_conf.c: make sure all enum cases are properly handled
in switches
Use the new virDomainUpdateDeviceFlags API to allow the VNC password
to be changed on the fly
* src/internal.h: Define STREQ_NULLABLE() which is like STREQ()
but does not crash if either argument is NULL, and treats two
NULLs as equal.
* src/libvirt_private.syms: Export virDomainGraphicsTypeToString
* src/qemu/qemu_driver.c: Support VNC password change on a live
machine
* src/qemu/qemu_monitor.c: Disable crazy debugging info. Treat a
NULL password as "" (empty string), allowing passwords to be
disabled in the monitor
To allow the new virDomainUpdateDeviceFlags() API to be universally
used with all drivers, this patch adds an impl to all the current
drivers which support CDROM or Floppy disk media change via the
current virDomainAttachDeviceFlags API
* src/qemu/qemu_driver.c, src/vbox/vbox_tmpl.c,
src/xen/proxy_internal.c, src/xen/xen_driver.c,
src/xen/xend_internal.c: Implement media change via the
virDomainUpdateDeviceFlags API
* src/xen/xen_driver.h, src/xen/xen_hypervisor.c,
src/xen/xen_inotify.c, src/xen/xm_internal.c,
src/xen/xs_internal.c: Stubs for Xen driver entry points
The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.
* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
stubs for new driver entry point
This introduces a new event type
VIR_DOMAIN_EVENT_ID_GRAPHICS
The same event can be emitted in 3 scenarios
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
} virDomainEventGraphicsPhase;
Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop
This event comes with *a lot* of potential information
- IP address, port & address family of client
- IP address, port & address family of server
- Authentication scheme (arbitrary string)
- Authenticated subject identity. A subject may have
multiple identities with some authentication schemes.
For example, vencrypt+sasl results in a x509dname
and saslUsername identities.
This results in a very complicated callback :-(
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
} virDomainEventGraphicsAddressType;
struct _virDomainEventGraphicsAddress {
int family;
const char *node;
const char *service;
};
typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;
struct _virDomainEventGraphicsSubject {
int nidentity;
struct {
const char *type;
const char *name;
} *identities;
};
typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;
typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
virDomainPtr dom,
int phase,
virDomainEventGraphicsAddressPtr local,
virDomainEventGraphicsAddressPtr remote,
const char *authScheme,
virDomainEventGraphicsSubjectPtr subject,
void *opaque);
The wire protocol is similarly complex
struct remote_domain_event_graphics_address {
int family;
remote_nonnull_string node;
remote_nonnull_string service;
};
const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;
struct remote_domain_event_graphics_identity {
remote_nonnull_string type;
remote_nonnull_string name;
};
struct remote_domain_event_graphics_msg {
remote_nonnull_domain dom;
int phase;
remote_domain_event_graphics_address local;
remote_domain_event_graphics_address remote;
remote_nonnull_string authScheme;
remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
};
This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.
* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
} virDomainEventIOErrorAction;
In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_WATCHDOG
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
VIR_DOMAIN_EVENT_WATCHDOG_RESET,
VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
} virDomainEventWatchdogAction;
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
virDomainPtr dom,
int action,
void *opaque);
* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_RTC_CHANGE
This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
long long utcoffset,
void *opaque);
If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.
* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
from QEMU monitor
The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_REBOOT
It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.
* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
reboot events
The libvirtd daemon impl will need to switch over to using the
new event APIs. To make this simpler, ensure all drivers currently
providing events support both the new APIs and old APIs.
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c, src/test/test_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Implement the new
virConnectDomainEvent(Dereg|Reg)isterAny driver entry points
The internal domain events APIs are designed to handle the lifecycle
events. This needs to be refactored to allow arbitrary new event
types to be handled.
* The signature of virDomainEventDispatchFunc changes to use
virConnectDomainEventGenericCallback instead of the lifecycle
event specific virConnectDomainEventCallback
* Every registered callback gains a unique ID to allow its
removal based on ID, instead of function pointer
* Every registered callback gains an 'eventID' to allow callbacks
for different types of events to be distinguished
* virDomainEventDispatch is adapted to filter out callbacks
whose eventID does not match the eventID of the event being
dispatched
* virDomainEventDispatch is adapted to filter based on the
domain name and uuid, if this filter is set for a callback.
* virDomainEvent type/detail fields are moved into a union to
allow different data fields for other types of events to be
added later
* src/conf/domain_event.h, src/conf/domain_event.c: Refactor
to allow handling of different types of events
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/xen/xen_driver.c: Change dispatch function signature
to use virConnectDomainEventGenericCallback
The current API for domain events has a number of problems
- Only allows for domain lifecycle change events
- Does not allow the same callback to be registered multiple times
- Does not allow filtering of events to a specific domain
This introduces a new more general purpose domain events API
typedef enum {
VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */
...more events later..
}
int virConnectDomainEventRegisterAny(virConnectPtr conn,
virDomainPtr dom, /* Optional, to filter */
int eventID,
virConnectDomainEventGenericCallback cb,
void *opaque,
virFreeCallback freecb);
int virConnectDomainEventDeregisterAny(virConnectPtr conn,
int callbackID);
Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature
eg
int myDomainEventCallback(virConnectPtr conn,
virDomainPtr dom,
int event,
int detail,
void *opaque)
{
...
}
virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
NULL, NULL);
The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature
* include/libvirt/libvirt.h.in: Define new APIs for registering
domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xenapi/xenapi_driver.c: Stub out new API entries
Before, this function would blindly accept an invalid def->dst
and then abuse the idx=-1 it would get from virDiskNameToIndex,
when passing it invalid strings like "xvda:disk" and "sda1".
Now, this function returns -1 upon failure.
* src/conf/domain_conf.c (virDomainDiskDefAssignAddress): as above.
Update callers.
* src/conf/domain_conf.h: Update prototype.
* src/qemu/qemu_conf.c: Update callers.
"virsh dominfo <vm>" crashes if there's no primary security driver set
since we only intialize the secmodel.model and secmodel.doi if we have
one. Attached patch checks for securityPrimaryDriver instead of
securityDriver since the later is always set in qemudSecurityInit().
Closes: http://bugs.debian.org/574359
Attempt to turn on vhost-net mode for devices of type NETWORK, BRIDGE,
and DIRECT (macvtap).
* src/qemu/qemu_conf.h: add vhostfd to qemuBuildHostNetStr prototype
add qemudOpenVhostNet prototype new flag to set when :,vhost=" found in
qemu help
* src/qemu/qemu_conf.c: * set QEMUD_CMD_FLAG_VNET_HOST is ",vhost=" found
in qemu help
- qemudOpenVhostNet - opens /dev/vhost-net to pass to qemu if everything
is in place to use it.
- qemuBuildHostNetStr - add vhostfd to commandline if it's not empty
(higher levels decide whether or not to fill it in)
- qemudBuildCommandLine - if /dev/vhost-net is successfully opened, add
its fd to tapfds array so it isn't closed on qemu exec, and populate
vhostfd_name to be passed in to commandline builder.
* src/qemu/qemu_driver.c: add filler 0 for new arg to qemuBuildHostNetStr,
along with a note that this must be implemented in order for hot-plug of
vhost-net virtio devices to work properly (once qemu "netdev_add" monitor
command is implemented).
Currently no command can be sent to a qemu process while another job is
active. This patch adds support for signaling long-running jobs (such as
migration) so that other threads may request predefined operations to be
done during such jobs. Two signals are defined so far:
- QEMU_JOB_SIGNAL_CANCEL
- QEMU_JOB_SIGNAL_SUSPEND
The first one is used by qemuDomainAbortJob.
The second one is used by qemudDomainSuspend for suspending a domain
during migration, which allows for changing live migration into offline
migration. However, there is a small issue in the way qemudDomainSuspend
is currently implemented for migrating domains. The API calls returns
immediately after signaling migration job which means it is asynchronous
in this specific case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
* src/qemu/qemu_driver.c (qemudDomainAttachSCSIDisk): The ".controller"
member is an index, and *may* be 0. As such, the commit that we're
reverting broke SCSI disk hot-plug on controller 0.
Reported by Wolfgang Mauerer.
We need to call PrepareHostdevs to determine the USB device path before
any security calls. PrepareHostUSBDevices was also incorrectly skipping
all USB devices.
* src/qemu/qemu_conf.c: add the ",readonly=on" for read-only disks
and also parse it back in qemuParseCommandLineDisk()
* tests/qemuxml2argvtest.c
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.args
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.xml:
add a specific regression test
Currently if you dump the core of a qemu guest with
qemudDomainCoreDump, subsequent commands will hang
up libvirtd. This is because qemudDomainCoreDump
uses qemuDomainWaitForMigrationComplete, which expects
the qemuDriverLock to be held when it's called. This
patch does the simple thing and moves the qemuDriveUnlock
to the end of the qemudDomainCoreDump so that the driver
lock is held for the entirety of the call (as it is done
in qemudDomainSave). We will probably want to make the
lock more fine-grained than that in the future, but
we can fix both qemudDomainCoreDump and qemudDomainSave
at the same time.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The code to add job support into libvirtd caused a problem
in qemudDomainSetVcpus. In particular, a qemuDomainObjEndJob()
call was added at the end of the function, but a
corresponding qemuDomainObjBeginJob() was not. Additionally,
a call to qemuDomainObj{Enter,Exit}Monitor() was also missed
in qemudDomainHotplugVcpus(). These missing calls conspired to
cause a hang in the libvirtd process after the command was
finished. Fix this by adding the missing calls.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
As previously discussed[1], this patch removes the
qemudDomainSetMaxMemory() function, since it doesn't
work. This means that instead of getting somewhat
cryptic errors, you will now get:
error: Unable to change MaxMemorySize
error: this function is not supported by the hypervisor: virDomainSetMaxMemory
Which describes the situation perfectly.
[1] https://www.redhat.com/archives/libvir-list/2010-February/msg00928.html
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When using the JSON monitor, qemuMonitorJSONExtractCPUInfo
was returning 0 on success. Unfortunately, higher levels of
the cpuinfo code expect that it returns the number of CPUs
it found on success. This one-line patch fixes it so that
it returns the correct number. This makes "virsh vcpuinfo <domain>"
work when using the JSON monitor.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
A few more non-literal format strings in error log messages have crept
in. Fix them in the standard way - turn the format string into "%s"
with the original string as the arg.
When adding domainMemoryStats API support for the qemu driver, I didn't
follow the locking rules exactly. The job condition must be held when
executing monitor commands. This corrects the segfaults I was seeing
when calling domainMemoryStats in a multi-threaded environment.
* src/qemu/qemu_driver.c: in qemudDomainMemoryStats() add missing
calls to qemuDomainObjBeginJob/qemuDomainObjEndJob
doTunnelSendAll function (used by QEMU migration) uses a 64k buffer on
the stack, which could be problematic. This patch replaces that with a
buffer from the heap.
While in the neighborhood, this patch also improves error reporting in
the case that saferead fails - previously, virStreamAbort() was called
(resetting errno) before reporting the error. It's been changed to
report the error first.
* src/qemu/qemu_driver.c: fix doTunnelSendAll() to use a malloc'ed
buffer
* src/qemu/qemu_driver.c (qemudDomainAttachSCSIDisk): Handle
the (theoretical) case of an empty controller list, so that
clang does not think the subsequent dereference of "cont"
would dereference an undefined variable (due to preceding
loop not iterating even once).
* src/qemu/qemu_driver.c (qemudDomainRestore): A corrupt save file
(in particular, a too-large header.xml_len value) would cause an
unwarranted out-of-memory error. Do not trust the just-read
header.xml_len. Instead, merely use that as a hint, and
read/allocate up to that number of bytes from the file.
Also verify that header.xml_len is positive; if it were negative,
passing it to virFileReadLimFD could cause trouble.
The code erroneously searched the entire "reply" for a comma, when
its intent was to search only that portion after "balloon: actual="
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetMemoryStats):
Search for "," only starting *after* the BALLOON_PREFIX string.
Otherwise, we'd be more prone to false positives.
Changeset
commit 5073aa994a
Author: Cole Robinson <crobinso@redhat.com>
Date: Mon Jan 11 11:40:46 2010 -0500
Added support for product/vendor based passthrough, but it only
worked at the security driver layer. The main guest XML config
was not updated with the resolved bus/device ID. When the QEMU
argv refactoring removed use of product/vendor, this then broke
launching guests.
THe solution is to move the product/vendor resolution up a layer
into the QEMU driver. So the first thing QEMU does is resolve
the product/vendor to a bus/device and updates the XML config
with this info. The rest of the code, including security drivers
and QEMU argv generated can now rely on bus/device always being
set.
* src/util/hostusb.c, src/util/hostusb.h: Split vendor/product
resolution code out of usbGetDevice and into usbFindDevice.
Add accessors for bus/device ID
* src/security/virt-aa-helper.c, src/security/security_selinux.c,
src/qemu/qemu_security_dac.c: Remove vendor/product from the
usbGetDevice() calls
* src/qemu/qemu_driver.c: Use usbFindDevice to resolve vendor/product
into a bus/device ID
The pci_del command is not being ported to QMP. Convert all the
QEMU hotplug code over to use device_del whenever it is available
to avoid the pci_del problem
* src/qemu/qemu_driver.c: Convert unplug code to device_del
Previously hot-unplug could not be supported for USB devices
in QEMU, since usb_del required the guest visible address
which libvirt never knows. With 'device_del' command we can
now unplug based on device alias, so support that.
* src/qemu/qemu_driver.c: Use device_del to remove USB devices
QEMU has a monitor command 'set_cpu' which allows a specific
CPU to be toggled between online& offline state. libvirt CPU
hotplug does not work in terms of individual indexes CPUs.
Thus to support this, we iteratively toggle the online state
when the total number of vCPUs is adjusted via libvirt
NB, currently untested since QEMU segvs when running this!
* src/qemu/qemu_driver.c: Toggle online state for CPUs when
doing hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
monitor API for toggling a CPU's online status via 'set_cpu
The QMP code was running query-migration instead of query-migrate.
This doesn't work so well
* src/qemu/qemu_monitor_json.c: s/query-migration/query-migrate/
The code to remove the cgroup after QEMU failed to startup could
be obscuring a real error from earlier on. It is not neccessary
to raise an error in this case, so tell cgroups to keep quiet
* src/qemu/qemu_driver.c: Don't raise cgroups error in QEMU start
cleanup code.
The QEMU hotunplug code for PCI devices was looking at host
devices in the guest config without first filtering non
PCI devices. This means it was reading garbage
* src/qemu/qemu_driver.c: Filter out non-PCI devices
Commit 3c12a67b76 added
a dependency on the NFS_SUPER_MAGIC macro, which is
defined in linux/magic.h. Unfortunately linux/magic.h
is not available in RHEL-5, and causes a compile error.
Just define it locally, since this is something that
can't change.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Move *all* file operations related to creation and writing of libvirt
header to the domain save file into a hook function that is called by
virFileOperation. First try to call virFileOperation as root. If that
fails with EACCESS, and (in the case of Linux) statfs says that we're
trying to save the file on an NFS share, rerun virFileOperation,
telling it to fork a child process and setuid to the qemu user. This
is the only way we can successfully create a file on a root-squashed
NFS server.
This patch (along with setting dynamic_ownership=0 in qemu.conf)
makes qemudDomainSave work on root-squashed NFS.
* src/qemu/qemu_driver.c: provide new qemudDomainSaveFileOpHook()
utility, use it in qemudDomainSave() if normal creation of the
file as root failed, and after checking the filesystem type for
the storage is NFS. In that case we also bypass the security
driver, as this would fail on NFS.
If qemudDomainRestore fails to open the domain save file, create a
pipe, then fork a process that does setuid(qemu_user) and opens the
file, then reads this file and stuffs it into the pipe. the parent
libvirtd process will use the other end of the pipe as its fd, then
reap the child process after it's done reading.
This makes domain restore work on a root-squash NFS share that is only
visible to the qemu user.
* src/qemu/qemu_driver.c: add new qemudOpenAsUID() helper function,
and use it in qemudDomainRestore() if reading as root directly failed.
The USB/PCI device hotplug code for the QEMU driver was forgetting
to allocate a unique device alias.
* src/qemu/qemu_driver.c: Fill in device alias for USB/PCI devices
The code assumed that 'device_add' returned an empty string upon
success. This is not true, it sometimes prints random debug info.
THus we need to check for an explicit fail string
* src/qemu/qemu_monitor_text.c: Fix error checking of the device_add
monitor command
When a VM save attempt failed, the VM would be left in a paused
state. It is neccessary to resume CPU execution upon failure
if it was running originally
* src/qemu/qemu_driver.c: Resume CPUs upon save failure
This supports cancellation of jobs for the QEMU driver against
the virDomainMigrate, virDomainSave and virDomainCoreDump APIs.
It is not yet supported for the virDomainRestore API, although
it is desirable.
* src/qemu/qemu_driver.c: Issue 'migrate_cancel' command if
virDomainAbortJob is issued during a migration operation
* tools/virsh.c: Add a domjobabort command
This provides the internal glue for the driver API
* src/driver.h: Internal API contract
* src/libvirt.c, src/libvirt_public.syms: Connect public API
to driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out entry points
Introduce support for virDomainGetJobInfo in the QEMU driver. This
allows for monitoring of any API that uses the 'info migrate' monitor
command. ie virDomainMigrate, virDomainSave and virDomainCoreDump
Unfortunately QEMU does not provide a way to monitor incoming migration
so we can't wire up virDomainRestore yet.
The virsh tool gets a new command 'domjobinfo' to query status
* src/qemu/qemu_driver.c: Record virDomainJobInfo and start time
in qemuDomainObjPrivatePtr objects. Add generic shared handler
for calling 'info migrate' with all migration based APIs.
* src/qemu/qemu_monitor_text.c: Fix parsing of 'info migration' reply
* tools/virsh.c: add new 'domjobinfo' command to query progress
The internal glue layer for the new pubic API
* src/driver.h: Define internal driver API contract
* src/libvirt.c, src/libvirt_public.syms: Wire up public
API to internal driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub new entry point
A number of the error messages raised when parsing USB devices
refered to PCI devices by mistake
* src/qemu/qemu_conf.c: s/PCI/USB/ in qemuParseCommandLineUSB()
when the underlying qemu supports the drive/device model and the
controller has been added this way.
* src/qemu/qemu_driver.c: use qemuMonitorDelDevice() when detaching
PCI controller and if supported
* src/qemu/qemu_monitor.[ch]: add new qemuMonitorDelDevice() function
* src/qemu/qemu_monitor_json.[ch]: JSON backend for DelDevice command
* src/qemu/qemu_monitor_text.[ch]: Text backend for DelDevice command
* src/qemu/qemu_driver.c: in qemudDomainDetachPciControllerDevice()
when a controller is not present in the system anymore, the PCI
address must be deleted from libvirt's hashtable because it can
be re-used for other purposes.
* src/qemu/qemu_driver.c: in qemudDomainAttachDevice(), one must not
delete the data part when the operation succeeds because it is
required later on. The correct pattern to handlethe parsed
representation of the device information on success
is dev->data.controller = NULL; virDomainDeviceDefFree(dev);,
which leaves the structure pointed at by data in memory.
Allow an arbitrary timezone with QEMU by setting the $TZ environment
variable when launching QEMU
* src/qemu/qemu_conf.c: Set TZ environment variable if a timezone
is requested
* tests/qemuxml2argvtest.c: Add test case for timezones
* tests/qemuxml2argvdata/qemuxml2argv-clock-france.xml,
tests/qemuxml2argvdata/qemuxml2argv-clock-france.args: Data
for timezone tests
This allows QEMU guests to be started with an arbitrary clock
offset
The test case can't actually be enabled, since QEMU argv expects
an absolute timestring, and this will obviously change every
time the test runs :-( Hopefully QEMU will allow a relative
time offset in the future.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Use the -rtc arg
if available to support variable clock offset mode
* tests/qemuhelptest.c: Add QEMUD_CMD_FLAG_RTC for qemu 0.12.1
* qemuxml2argvdata/qemuxml2argv-clock-variable.args,
qemuxml2argvdata/qemuxml2argv-clock-variable.xml,
qemuxml2argvtest.c: Test case, except we can't actually enable
it yet.
The XML will soon be extended to allow more than just a simple
localtime/utc boolean flag. This change replaces the plain
'int localtime' with a separate struct to prepare for future
extension
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a new
virDomainClockDef structure
* src/libvirt_private.syms: Export virDomainClockOffsetTypeToString
and virDomainClockOffsetTypeFromString
* src/qemu/qemu_conf.c, src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
src/xen/xm_internal.c: Updated to use new structure for localtime
If the hostname as returned by "gethostname" resolves
to "localhost" (as it does with the broken Fedora-12
installer), then live migration will fail because the
source will try to migrate to itself. Detect this
situation up-front and abort the live migration before
we do any real work.
* src/util/util.h src/util/util.c: add a new virGetHostnameLocalhost
with an optional localhost check, and rewire virGetHostname() to use
it
* src/libvirt_private.syms: expose the new function
* src/qemu/qemu_driver.c: use it in qemudDomainMigratePrepare2()
This patch sets or unsets the IFF_VNET_HDR flag depending on what device
is used in the VM. The manipulation of the flag is done in the open
function and is only fatal if the IFF_VNET_HDR flag could not be cleared
although it has to be (or if an ioctl generally fails). In that case the
macvtap tap is closed again and the macvtap interface torn.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: pass qemuCmdFlags to
qemudPhysIfaceConnect()
* src/util/macvtap.c src/util/macvtap.h: add vnet_hdr boolean to
openMacvtapTap(), and private function configMacvtapTap()
* src/qemu/qemu_driver.c: add extra qemuCmdFlags when calling
qemudPhysIfaceConnect()
Support virtio-serial controller and virtio channel in QEMU backend.
Will output
the following for virtio-serial controller:
-device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4,max_ports=16,vectors=4
and the following for a virtio channel:
-chardev pty,id=channel0 \
-device
virtserialport,bus=virtio-serial0.0,chardev=channel0,name=org.linux-kvm.port.0
* src/qemu/qemu_conf.c: Add argument output for virtio
* tests/qemuxml2argvtest.c
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args: Add test for
QEMU command line generation
Add support for virtio-serial by defining a new 'virtio' channel target type
and a virtio-serial controller. Allows the following to be specified in a
domain:
<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
<channel type='pty'>
<target type='virtio' name='org.linux-kvm.port.0'/>
<address type='virtio-serial' controller='0' bus='0'/>
</channel>
* docs/schemas/domain.rng: Add virtio-serial controller and virtio
channel type.
* src/conf/domain_conf.[ch]: Domain parsing/serialization for
virtio-serial controller and virtio channel.
* tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml
parsing test
* src/libvirt_private.syms src/qemu/qemu_conf.c:
virDomainDefAddDiskControllers() renamed to
virDomainDefAddImplicitControllers()
Currently we just error with ex. 'virbr0: No such device'.
Since we are using public API calls here, we need to ensure that any
raised error is properly saved and restored, since API entry points
always reset messages.
Rework and simplification of teardown of the macvtap device.
Basically all devices with the same MAC address and link device are kept
alive and not attempted to be torn down. If a macvtap device linked to a
physical interface with a certain MAC address 'M' is to be created it
will automatically fail if the interface is 'up'ed and another macvtap
with the same properties (MAC addr 'M', link dev) happens to be 'up'.
This will prevent the VM from starting or the device from being attached
to a running VM. Stale interfaces are assumed to be there for some
reason and not stem from libvirt.
In the VM shutdown path, it's assuming that an interface name is always
available so that if the device type is DIRECT it can be torn down
using its name.
* src/util/macvtap.h src/libvirt_macvtap.syms: change of deleting routine
* src/util/macvtap.c: cleanups and change of deleting routine
* src/qemu/qemu_driver.c: change cleanup on shutdown
* src/qemu/qemu_conf.c: don't delete Macvtap in qemudPhysIfaceConnect()
The QEMU JSON monitor changed balloon commands to return/accept
bytes instead of kilobytes. Update libvirt to cope with this
* src/qemu/qemu_monitor_json.c: Expect/use bytes for ballooning
Similar to the Set*Mem commands, this implementation was bogus and
misleading. Make it clear this is a hotplug only operation, and that the
hotplug piece isn't even implemented.
Also drop the overkill maxvcpus validation: we don't perform this check
at XML define time so clearly no one is missing it, and there is
always the risk that our info will be out of date, possibly preventing
legitimate CPU values.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
SetMem and SetMaxMem are hotplug only APIs, any persistent config
changes are supposed to go via XML definition. The original implementation
of these calls were incorrect and had the nasty side effect of making
a psuedo persistent change that would be lost after libvirtd restart
(I didn't know any better).
Fix these APIs to rightly reject non running domains.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The plain QEMU tree does not include 'thread_id' in the JSON
output. Thus we need to treat it as non-fatal if missing.
* src/qemu/qemu_monitor_json.c: Treat missing thread_id as non-fatal
A typo in the check for the primary IDE controller could cause
a crash on restore depending on the exact guest config.
* src/qemu/qemu_conf.c: Fix s/video/controller/ typo & slot
number typo
Current error reporting for JSON mode returns the full JSON
command string and full JSON error string. This is not very
user friendly, so this change makes the error report only
contain the basic command name, and friendly error message
description string. The full JSON data is logged instead.
* src/qemu/qemu_monitor_json.c: Always return the 'desc' field from
the JSON error message to users.
When in JSON mode, QEMU requires that 'qmp_capabilities' is run as
the first command in the monitor. This is a no-op when run in the
text mode monitor
* src/qemu/qemu_driver.c: Run capabilities negotiation when
connecting to the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
support for the 'qmp_capabilities' command, no-op in text mode.
This part adds support for qemu making a macvtap tap device available
via file descriptor passed to qemu command line. This also attempts to
tear down the macvtap device when a VM terminates. This includes support
for attachment and detachment to/from running VM.
* src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the
QEmu driver
Current PCI addresses are allocated at time of VM startup.
To make them truely persistent, it is neccessary to do this
at time of virDomainDefine/virDomainCreate. The code in
qemuStartVMDaemon still remains in order to cope with upgrades
from older libvirt releases
* src/qemu/qemu_driver.c: Rename existing qemuAssignPCIAddresses
to qemuDetectPCIAddresses. Add new qemuAssignPCIAddresses which
does auto-allocation upfront. Call qemuAssignPCIAddresses from
qemuDomainDefine and qemuDomainCreate to assign PCI addresses that
can then be persisted. Don't clear PCI addresses at shutdown if
they are intended to be persistent
The old text mode monitor prompts for a password when disks are
encrypted. This interactive approach doesn't work for JSON mode
monitor. Thus there is a new 'block_passwd' command that can be
used.
* src/qemu/qemu_driver.c: Split out code for looking up a disk
secret from findVolumeQcowPassphrase, into a new method
getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also
set the disk encryption password via the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
support for the 'block_passwd' monitor command.
Since c26cb9234f, the dname
parameter has been ignored by these two functions. Use it.
* src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Honor dname
parameter once again.
(qemudDomainMigratePrepare2): Likewise.
All other libvirt functions use array first and then number of elements
in that array. Let's make cpuDecode follow this rule.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With QEMU >= 0.12 the host and guest side of disks no longer have
the same naming convention. Specifically the host side will now
get a 'drive-' prefix added to its name. The 'info blockstats'
monitor command returns the host side name, so it is neccessary
to strip this off when looking up stats since libvirt stores the
guest side name !
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix
string to a defined constant
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip
off 'drive-' prefix (if found) when looking up disk stats
Currently the timeout for reading startup output is 3 seconds. If the
host is under any sort of load, we can easily trigger this. Lets bump
it to 30 seconds.
Since the polling loop checks to see if the process has died, we shouldn't
erroneously hit this timeout if qemu bombs (only if it is stuck in some
infinite loop).
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr
args as mandatory non-null so the compiler can warn of mistakes
* src/conf/domain_event.h: All virConnectPtr args must be non-null
* src/qemu/qemu_conf.h: qemudBuildCommandLine and
qemudNetworkIfaceConnect() must be given non-null connection
* tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to
qemudBuildCommandLine()
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in cpu_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match
All callers now pass a NULL virConnectPtr into the USB/PCi device
iterator functions. Therefore the virConnectPtr arg can now be
removed from these functions
* src/util/hostusb.h, src/util/hostusb.c: Remove virConnectPtr
from usbDeviceFileIterate
* src/util/pci.c, src/util/pci.h: Remove virConnectPtr arg from
pciDeviceFileIterate
* src/qemu/qemu_security_dac.c, src/security/security_selinux.c: Update
to drop redundant virConnectPtr arg
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
Use 'unsigned long long' for QEMU flags
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in security_driver.{h,c} and update all callers to
match
The security driver was mistakenly initialized before the QEMU
config file was loaded. This prevents it being turned off again.
The capabilities XML was also getting the wrong security driver
name, due to the stacked driver arrangement.
* src/qemu/qemu_driver.c: Fix initialization order and capabilities
model name
When restoring from a saved guest image, the XML would already
contain the PCI slot ID of the IDE controller & video card.
The attempt to explicitly reserve this upfront would thus fail
everytime.
* src/qemu/qemu_conf.c: Reserve IDE controller / video card
slot at time of need, rather than upfront
If the primary security driver (SELinux/AppArmour) was disabled
then the secondary QEMU DAC security driver was also disabled.
This is mistaken, because the latter must be active at all times
* src/qemu/qemu_driver.c: Ensure DAC driver is always active
To allow devices to be hot(un-)plugged it is neccessary to ensure
they all have a unique device aliases. This fixes the hotplug
methods to assign device aliases before invoking the monitor
commands which need them
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Expose methods
for assigning device aliases for disks, host devices and
controllers
* src/qemu/qemu_driver.c: Assign device aliases when hotplugging
all types of device
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address-device.args:
Update for changed hostdev naming scheme
This patch re-arranges the QEMU device alias assignment code to
make it easier to call into the same codeblock when performing
device hotplug. The new code has the ability to skip over already
assigned names to facilitate hotplug
* src/qemu/qemu_driver.c: Call qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_conf.h: Export qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_driver.c: Merge the legacy disk/network alias
assignment code into the main methods
The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
Use a single network alias naming scheme regardless of NIC type
or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
for new simpler naming scheme
The QEMU 0.12.x tree has the -netdev command line argument, but not
corresponding monitor command. We can't enable the former, without
the latter since it will break hotplug/unplug.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage
until 0.13 at earliest
* tests/qemuxml2argvtest.c: Add test for -netdev syntax
* tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test
data files for -netdev syntax
PCI disk, disk controllers, net devices and host devices need to
have PCI addresses assigned before they are hot-plugged
* src/qemu/qemu_conf.c: Add APIs for ensuring a device has an
address and releasing unused addresses
* src/qemu/qemu_driver.c: Ensure all devices have addresses
when hotplugging.
The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.
It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
list of existing PCI addresses, and allocating new addresses.
Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
qemuStartVMDaemon() method, as a prelude to moving it into the
'define' method. Update list of allocated addresses when connecting
to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
tests/qemuxml2xmltest.c: Remove USB product test since all
passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
unused data files
Since QEMU startup uses the new -device argument, the hotplug
code needs todo the same. This converts disk, network and
host device hotplug to use the device_add command
* src/qemu/qemu_driver.c: Use new device_add monitor APIs
whereever possible
The way QEMU is started has been changed to use '-device' and
the new style '-drive' syntax. This needs to be mirrored in
the hotplug code, requiring addition of two new APIs.
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Define APIs
qemuMonitorAddDevice() and qemuMonitorAddDrive()
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Implement the new monitor APIs
To allow for better code reuse from hotplug methods, the code for
generating PCI/USB hostdev arg values is split out into separate
methods
* qemu/qemu_conf.h, qemu/qemu_conf.c: Introduce new APis for
qemuBuildPCIHostdevPCIDevStr, qemuBuildUSBHostdevUsbDevStr
and qemuBuildUSBHostdevDevStr
All the helper functions for building command line arguments
now return a 'char *', instead of acepting a 'char **' or
virBufferPtr argument
* qemu/qemu_conf.c: Standardize syntax for building args
* qemu/qemu_conf.h: Export all functions for building args
* qemu/qemu_driver.c: Update for changed syntax for building
NIC/hostnet args
Similar to the race fixed by
be34c3c7ef, make sure
to wait around for KVM to release the resources from
a hot-detached PCI device before attempting to
rebind that device to the host driver.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The QEMU driver contained code to generate a -device string for piix4-ide, but
wasn't using it. This change removes this string generation. It also adds a
comment explaining why IDE and FDC controllers don't generate -device strings.
The change also generates an error if a sata controller is specified for a QEMU
domain, as this isn't supported.
* src/qemu/qemu_conf.c: Remove VIR_DOMAIN_CONTROLLER_TYPE_IDE handler in
qemuBuildControllerDevStr(). Ignore IDE and FDC controllers. Error if
SATA controller is discovered. Add comments.
On RHEL-5 the qemu-kvm binary is located in /usr/libexec.
To reduce confusion for people trying to run upstream libvirt
on RHEL-5 machines, make the qemu driver look in /usr/libexec
for the qemu-kvm binary.
To make this work, I modified virFindFileInPath to handle an
absolute path correctly. I also ran into an issue where
NULL was sometimes being passed for the file parameter
to virFindFileInPath; it didn't crash prior to this patch
since it was building paths like /usr/bin/(null). This
is non-standard behavior, though, so I added a NULL
check at the beginning.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
If you shutdown libvirtd while a domain with PCI
devices is running, then try to restart libvirtd,
libvirtd will crash.
This happens because qemuUpdateActivePciHostdevs() is calling
pciDeviceListSteal() with a dev of 0x0 (NULL), and then trying
to dereference it. This patch fixes it up so that
qemuUpdateActivePciHostdevs() steals the devices after first
Get()'ting them, avoiding the crash.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/qemu/qemu_monitor_text.c (qemuMonitorTextAttachDrive): Most other
failures in this function would "goto cleanup", but one mistakenly
returned directly, skipping the cleanup and resulting in a leak.
In addition, iterating the "try_command" loop would clobber, and
thus leak, the "cmd" allocated on the first iteration,
so be careful to free it in addition to "reply" beforehand.
The KVM build of QEMU includs the thread ID of each vCPU in the
'query-cpus' output. This is required for pinning guests to
particular host CPUs
* src/qemu/qemu_monitor_json.c: Extract 'thread_id' from CPU info
* src/util/json.c, src/util/json.h: Declare returned strings
to be const
* src/qemu/qemu_monitor.c: Wire up JSON mode for qemuMonitorGetPtyPaths
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Fix
const correctness. Add missing error message in the function
qemuMonitorJSONGetAllPCIAddresses. Add implementation of the
qemuMonitorGetPtyPaths function calling 'query-chardev'.
Certain hypervisors (like qemu/kvm) map the PCI bar(s) on
the host when doing device passthrough. This can lead to a race
condition where the hypervisor is still cleaning up the device while
libvirt is trying to re-attach it to the host device driver. To avoid
this situation, we look through /proc/iomem, and if the hypervisor is
still holding onto the bar (denoted by the string in the matcher variable),
then we can wait around a bit for that to clear up.
v2: Thanks to review by DV, make sure we wait the full timeout per-device
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Fix a small problem with the qemu memory stats parsing algorithm. If qemu
reports a stat that libvirt does not recognize, skip past it so parsing can
continue. This corrects a potential infinite loop in the parsing code that can
only be triggered if new statistics are added to qemu.
* src/qemu/qemu_monitor_text.c: qemuMonitorParseExtraBalloonInfo add a
skip for extra ','
The loop looking for the controller associated with a SCI drive had
an off by one, causing it to miss the last controller.
* src/qemu/qemu_driver.c: Fix off-by-1 in searching for SCSI
drive hotplug
The hotplug code in QEMU was leaking memory because although the
inner device object was being moved into the main virDomainDefPtr
config object, the outer container virDomainDeviceDefPtr was not.
* src/qemu/qemu_driver.c: Clarify code to show that the inner
device object is owned by the main domain config upon
successfull attach.
Add the ability to turn off dynamic management of file permissions
for libvirt guests.
* qemu/libvirtd_qemu.aug: Support 'dynamic_ownership' flag
* qemu/qemu.conf: Document 'dynamic_ownership' flag.
* qemu/qemu_conf.c: Load 'dynamic_ownership' flag
* qemu/test_libvirtd_qemu.aug: Test 'dynamic_ownership' flag
The hotplug code was not correctly invoking the security driver
in error paths. If a hotplug attempt failed, the device would
be left with VM permissions applied, rather than restored to the
original permissions. Also, a CDROM media that is ejected was
not restored to original permissions. Finally there was a bogus
call to set hostdev permissions in the hostdev unplug code
* qemu/qemu_driver.c: Fix security driver usage in hotplug/unplug
If there is a problem with VM startup, PCI devices may be left
assigned to pci-stub / pci-back. Adding a call to reattach
host devices in the cleanup path is required.
* qemu/qemu_driver.c: qemuDomainReAttachHostDevices() when
VM startup fails
Remove all the QEMU driver calls for setting file ownership and
process uid/gid. Instead wire in the QEMU DAC security driver,
stacking it ontop of the primary SELinux/AppArmour driver.
* qemu/qemu_driver.c: Switch over to new DAC security driver
This new security driver is responsible for managing UID/GID changes
to the QEMU process, and any files/disks/devices assigned to it.
* qemu/qemu_conf.h: Add flag for disabling automatic file permission
changes
* qemu/qemu_security_dac.h, qemu/qemu_security_dac.c: New DAC driver
for QEMU guests
* Makefile.am: Add new files
Pulling the disk labelling code out of the exec hook, and into
libvirtd will allow it to access shared state in the daemon. It
will also make debugging & error reporting easier / more reliable.
* qemu/qemu_driver.c: Move initial disk labelling calls up into
libvirtd. Add cleanup of disk labels upon failure
If a VM fails to start, we can't simply free the security label
strings, we must call the domainReleaseSecurityLabel() method
otherwise the reserved 'mcs' level will be leaked in SElinux
* src/qemu/qemu_driver.c: Invoke domainReleaseSecurityLabel()
when domain fails to start
The current security driver architecture has the following
split of logic
* domainGenSecurityLabel
Allocate the unique label for the domain about to be started
* domainGetSecurityLabel
Retrieve the current live security label for a process
* domainSetSecurityLabel
Apply the previously allocated label to the current process
Setup all disk image / device labelling
* domainRestoreSecurityLabel
Restore the original disk image / device labelling.
Release the unique label for the domain
The 'domainSetSecurityLabel' method is special because it runs
in the context of the child process between the fork + exec.
This is require in order to set the process label. It is not
required in order to label disks/devices though. Having the
disk labelling code run in the child process limits what it
can do.
In particularly libvirtd would like to remember the current
disk image label, and only change shared image labels for the
first VM to start. This requires use & update of global state
in the libvirtd daemon, and thus cannot run in the child
process context.
The solution is to split domainSetSecurityLabel into two parts,
one applies process label, and the other handles disk image
labelling. At the same time domainRestoreSecurityLabel is
similarly split, just so that it matches the style. Thus the
previous 4 methods are replaced by the following 6 new methods
* domainGenSecurityLabel
Allocate the unique label for the domain about to be started
No actual change here.
* domainReleaseSecurityLabel
Release the unique label for the domain
* domainGetSecurityProcessLabel
Retrieve the current live security label for a process
Merely renamed for clarity.
* domainSetSecurityProcessLabel
Apply the previously allocated label to the current process
* domainRestoreSecurityAllLabel
Restore the original disk image / device labelling.
* domainSetSecurityAllLabel
Setup all disk image / device labelling
The SELinux and AppArmour drivers are then updated to comply with
this new spec. Notice that the AppArmour driver was actually a
little different. It was creating its profile for the disk image
and device labels in the 'domainGenSecurityLabel' method, where as
the SELinux driver did it in 'domainSetSecurityLabel'. With the
new method split, we can have consistency, with both drivers doing
that in the domainSetSecurityAllLabel method.
NB, the AppArmour changes here haven't been compiled so may not
build.
The QEMU driver is doing 90% of the calls to check for static vs
dynamic labelling. Except it is forgetting todo so in many places,
in particular hotplug is mistakenly assigning disk labels. Move
all this logic into the security drivers themselves, so the HV
drivers don't have to think about it.
* src/security/security_driver.h: Add virDomainObjPtr parameter
to virSecurityDomainRestoreHostdevLabel and to
virSecurityDomainRestoreSavedStateLabel
* src/security/security_selinux.c, src/security/security_apparmor.c:
Add explicit checks for VIR_DOMAIN_SECLABEL_STATIC and skip all
chcon() code in those cases
* src/qemu/qemu_driver.c: Remove all checks for VIR_DOMAIN_SECLABEL_STATIC
or VIR_DOMAIN_SECLABEL_DYNAMIC. Add missing checks for possibly NULL
driver entry points.
* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c
src/network/bridge_driver.c src/qemu/qemu_driver.c
src/uml/uml_driver.c: virFileMakePath returns 0 for success, or the
value of errno on failure, so error checking should be to test
if non-zero, not if lower than 0
The test expected all environment variables copied in qemudBuildCommandLine
to have known values. So all of them have to be either set to a known value
or be unset. SDL_VIDEODRIVER and QEMU_AUDIO_DRV are not handled at all but
should be handled. Unset both, otherwise the test will fail if they are set
in the testing environment.
* src/qemu/qemu_conf.c: add a comment about copied environment variables
and qemuxml2argvtest
* tests/qemuxml2argvtest.c: unset SDL_VIDEODRIVER and QEMU_AUDIO_DRV
Invoking the virConnectGetCapabilities() method causes the QEMU
driver to rebuild its internal capabilities object. Unfortunately
it was forgetting to register the custom domain status XML hooks
again.
To avoid this kind of error in the future, the code which builds
capabilities is refactored into one single method, which can be
called from all locations, ensuring reliable rebuilds.
* src/qemu/qemu_driver.c: Fix rebuilding of capabilities XML and
guarentee it is always consistent
I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
VIR_DEBUG
VIR_DEBUG0
VIR_ERROR
VIR_ERROR0
VIR_INFO
VIR_WARN
VIR_WARN0
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU's command line equivalent for the following domain XML fragment
<vcpus>2</vcpus>
<cpu ...>
...
<topology sockets='1' cores='2', threads='1'/>
</cpu>
is
-smp 2,sockets=1,cores=2,threads=1
This syntax was introduced in QEMU-0.12.
Version 2 changes:
- -smp argument build split into a separate function
- always add ",sockets=S,cores=C,threads=T" to -smp if qemu supports it
- use qemuParseCommandLineKeywords for command line parsing
Version 3 changes:
- ADD_ARG_LIT => ADD_ARG and line reordering in qemudBuildCommandLine
- rebased
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Current version expects name=value,... list and when an incorrect string
such as "a,b,c=d" would be parsed as "a,b,c" keyword with "d" value
without reporting any error, which is probably not the expected
behavior.
This patch adds an extra argument called allowEmptyValue, which if
non-zero will permit keywords with no value; "a,b=c,,d=" will be parsed
as follows:
keyword value
"a" NULL
"b" "c"
"" NULL
"d" ""
In case allowEmptyValue is zero, the string is required to contain
name=value pairs only; retvalues is guaranteed to contain non-NULL
pointers. Now, "a,b,c=d" will result in an error.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Replace
-balloon virtio
With
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
This allows it to get correct assigned PCI address as declared in
previous patch
* src/qemu/qemu_conf.c: Convert Virtio ballon to -device and
give it an explicit PCI address
* tests/qemuxml2argvdata/qemuxml2argv-*args: Add in virtio balloon
where appropriate
Instead of relying on QEMU to assign PCI addresses and then querying
them with 'info pci', manually assign all PCI addresses before starting
the guest. These addresses are not stable across reboots. That will
come in a later patch
NB, the PIIX3 (IDE, FDC, ISA-Bridge) will always have slot 1 and
VGA will always have slot 2. We declare the Virtio Balloon gets
slot 3, and then all remaining slots are for configured devices.
* src/qemu/qemu_conf.c: If -device is supported, then assign all PCI
addresses when building the command line
* src/qemu/qemu_driver.c: Don't query monitor for PCI addresses if
they have already been assigned
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-sound-device.args,
tests/qemuxml2argvdata/qemuxml2argv-watchdog-device.args: Update
to include PCI slot/bus information
QEMU always configures a VGA card. If no video card is included in
the libvirt XML, it is neccessary to explicitly turn off the default
using -vga none
* src/qemu/qemu_conf.c: Pass -vga none if no video card is configured
* tests/qemuargv2xmltest.c, tests/qemuxml2argvtest.c: Test for
handling -vga none.
* tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.args,
tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.xml: Test
data files
Not all QEMU builds default to SDL graphics for their display.
Newer QEMU now has an explicit -sdl flag, which we can use to
explicitly request SDL intead of relying on the default. This
protects libvirt against unexpected changes in graphics default
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Probe for -sdl
flag and use it if it is found
* tests/qemuhelptest.c: Add SDL flag to tests
The old syntax was
-chardev SOMECONFIG
-nic user,guestfwd=tcp:IP:PORT-chardev:CHARDEV
The new syntax is
-chardev SOMECONFIG
-netdev user,guestfwd=tcp:IP:PORT,chardev=ID,id=user-ID
The old syntax was
-usbdevice host:PRODUCT:VENDOR
Or
-usbdevice host:BUS.DEV
The new syntax is
-device usb-host,product=PRODUCT,vendor=VENDOR
Or
-device usb-host,hostbus=BUS,hostaddr=DEV
The previous syntax was severely limited in its options
-usbdevice disk:/home/berrange/output.img
The new syntax is the same as for other disk types
-drive file=/home/berrange/output.img,if=none,id=usb-1,index=1
-device usb-storage,drive=usb-1
Again, the index= arg is wrong here, and will be removed in a
later merge
The current syntax uses a pair of args
-net nic,macaddr=52:54:00:56:6c:55,vlan=3,model=pcnet,name=pcnet.0
-net user,vlan=3,name=user.0
The new syntax does not need the vlan craziness anymore, and
so has a simplified pair of args
-netdev user,id=user.0
-device pcnet,netdev=user.0,id=pcnet.0,mac=52:54:00:56:6c:55,addr=<PCI SLOT>
The current preferred syntax for disk drives uses
-drive file=/vms/plain.qcow,if=virtio,index=0,boot=on,format=qcow
The new syntax splits this up into a pair of linked args
-drive file=/vms/plain.qcow,if=none,id=drive-virtio-0,format=qcow2
-device virtio-blk-pci,drive=drive-virtio-0,id=virtio-0,addr=<PCI SLOT>
SCSI/IDE devices also get a bus property linking them to the
controller
-device scsi-disk,drive=drive-scsi0-0-0,id=scsi0-0-0,bus=scsi0.0,scsi-id=0
-device ide-drive,drive=drive-ide0-0-0,id=ide0-0-0,bus=ide0,unit=0
The current syntax for audio devices is a horrible multiplexed
arg
-soundhw sb16,pcspk,ac97
The new syntax is
-device sb16,id=sound0
or
-device AC97,id=sound1,addr=<PCI SLOT>
NB, pcspk still uses the old -soundhw syntax
The current character device syntax uses either
-serial tty,path=/dev/ttyS2
Or
-chardev tty,id=serial0,path=/dev/ttyS2 -serial chardev:serial0
With the new -device support, we now prefer
-chardev file,id=serial0,path=/tmp/serial.log -device isa-serial,chardev=serial0
This patch changes the existing -chardev syntax to use this new
scheme, and fallbacks to the old plain -serial syntax for old
QEMU.
The monitor device changes to
-chardev socket,id=monitor,path=/tmp/test-monitor,server,nowait -mon chardev=monitor
In addition, this patch adds --nodefaults, which kills off the
default serial, parallel, vga and nic devices. THis avoids the
need for us to explicitly turn each off
When starting a guest, give every device a unique alias. This will
be used for the 'id' parameter in -device args in later patches.
It can also be used to uniquely identify devices in the monitor
For old QEMU without -device, assign disk names based on QEMU's
historical naming scheme.
* src/qemu/qemu_conf.c: Assign unique device aliases
* src/qemu/qemu_driver.c: Remove obsolete qemudDiskDeviceName
and use the device alias in eject & blockstats commands
Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases
* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU
This patch introduces the support for giving all devices a short,
unique name, henceforth known as a 'device alias'. These aliases
are not set by the end user, instead being assigned by the hypervisor
if it decides it want to support this concept.
The QEMU driver sets them whenever using the -device arg syntax
and uses them for improved hotplug/hotunplug. it is the intent
that other APIs (block / interface stats & device hotplug) be
able to accept device alias names in the future.
The XML syntax is
<alias name="video0"/>
This may appear in any type of device that supports device info.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a 'alias'
field to virDomainDeviceInfo struct & parse/format it in XML
* src/libvirt_private.syms: Export virDomainDefClearDeviceAliases
* src/qemu/qemu_conf.c: Replace use of "nic_name" field with the
standard device alias
* src/qemu/qemu_driver.c: Clear device aliases at shutdown
The PCI device addresses are only valid while the VM is running,
since they are auto-assigned by QEMU. After shutdown they must
all be cleared. Future QEMU driver enhancement will allow for
persistent PCI address assignment
* src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms
Add virDomainDefClearPCIAddresses() method for wiping out auto assigned
PCI addresses
* src/qemu/qemu_driver.c: Clear PCI addresses at VM shutdown
Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
method for populating disk controllers, and call it after
parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
data to all data files which don't have it already
Hotunplug of devices requires that we know their PCI address. Even
hotplug of SCSI drives, required that we know the PCI address of
the SCSI controller to attach the drive to. We can find this out
by running 'info pci' and then correlating the vendor/product IDs
with the devices we booted with.
Although this approach is somewhat fragile, it is the only viable
option with QEMU < 0.12, since there is no way for libvirto set
explicit PCI addresses when creating devices in the first place.
For QEMU > 0.12, this code will not be used.
* src/qemu/qemu_driver.c: Assign all dynamic PCI addresses on
startup of QEMU VM, matching vendor/product IDs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
API for fetching PCI device address mapping
The current SCSI hotplug support attaches a brand new SCSI controller
for every disk. This is broken because the semantics differ from those
used when starting the VM initially. In the latter case, each SCSI
controller is filled before a new one is added.
If the user specifies an high drive index (sdazz) then at initial
startup, many intermediate SCSI controllers may be added with no
drives.
This patch changes SCSI hotplug so that it exactly matches the
behaviour of initial startup. First the SCSI controller number is
determined for the drive to be hotplugged. If any controller upto
and including that controller number is not yet present, it is
attached. Then finally the drive is attached to the last controller.
NB, this breaks SCSI hotunplug, because there is no 'drive_del'
command in current QEMU. Previous SCSI hotunplug was broken in
any case because it was unplugging the entire controller, not
just the drive in question.
A future QEMU will allow proper SCSI hotunplug of a drive.
This patch is derived from work done by Wolfgang Mauerer on disk
controllers.
* src/qemu/qemu_driver.c: Fix SCSI hotplug to add a drive to
the correct controller, instead of just attaching a new
controller.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
support for 'drive_add' command
This patch allows for explicit hotplug/unplug of SCSI controllers.
Ordinarily this is not required, since QEMU/libvirt will attach
a new SCSI controller whenever one is required. Allowing explicit
hotplug of controllers though, enables the caller to specify a
static PCI address, instead of auto-assigning the next available
PCI slot. Or it will when we have static PCI addressing.
This patch is derived from Wolfgang Mauerer's disk controller
patch series.
* src/qemu/qemu_driver.c: Support hotplug & unplug of SCSI
controllers
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
new API for attaching PCI SCSI controllers
qemudFindCharDevicePTYsMonitor reports an error if 'info chardev' didn't
provide information for a requested device, even if the log output parsing
had found the pty path for that device. This makes pty assignment fail for
older QEMU/KVM versions. For example KVM 72 on Debian doesn't support
'info chardev', so qemuMonitorTextGetPtyPaths cannot parse any useful
information and the hash for device-id-to-pty-path mapping stays empty.
Make qemudFindCharDevicePTYsMonitor report an error only if the log output
parsing and the 'info chardev' parsing failed to provide the pty path.
The current code for using -drive simply sets the -drive 'index'
parameter. QEMU internally converts this to bus/unit depending
on the type of drive. This does not give us precise control over
the bus/unit assignment though. This change switches over to make
libvirt explicitly calculate the bus/unit number.
In addition bus/unit/index are actually irrelevant for VirtIO
disks, since each virtio disk is a separate PCI device. No disk
controller is involved.
Doing the conversion to bus/unit in libvirt allows us to correctly
attach SCSI controllers when required.
* src/qemu/qemu_conf.c: Specify bus/unit instead of index for
disks
* tests/qemuxml2argvdata/qemuxml2argv-disk*.args: Switch over from
using index=NNNN, to bus=NN, unit=NN for SCSI/IDE/Floppy disks
To enable it to be called from multiple locations, split out
the code for building the -drive arg string. This will be needed
by later patches which do drive hotplug, the conversion to use
-device, and the conversion to controller/bus/unit addressing
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuBuildDriveStr
for building -drive arg string
Convert the QEMU monitor APIs over to use virDomainDeviceAddress
structs for passing addresses in/out, instead of individual bits.
This makes the number of parameters smaller & easier to deal with.
No functional change
* src/qemu/qemu_driver.c, src/qemu/qemu_monitor.c,
src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_text.c,
src/qemu/qemu_monitor_text.h: Change monitor hotplug APIs to
take an explicit address ptr for all host/guest addresses
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
to all XML files
All guest devices now use a common device address structure
summarized by:
enum virDomainDeviceAddressType {
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE,
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI,
};
struct _virDomainDevicePCIAddress {
unsigned int domain;
unsigned int bus;
unsigned int slot;
unsigned int function;
};
struct _virDomainDeviceInfo {
int type;
union {
virDomainDevicePCIAddress pci;
} addr;
};
This replaces the anonymous structs in Disk/Net/Hostdev data
structures. Where available, the address is *always* printed
in the XML file, instead of being hidden in the internal state
file.
<address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/>
The structure definition is based on Wolfgang Mauerer's disk
controller patch series.
* docs/schemas/domain.rng: Define the <address> syntax and
associate it with disk/net/hostdev devices
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: APIs for parsing/formatting address
information. Also remove the QEMU specific 'pci_addr' attributes
* src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with
new standardized format.
Based off how QEMU does it, look through /sys/bus/usb/devices/* for
matching vendor:product info, and if found, use info from the surrounding
files to build the device's /dev/bus/usb path.
This fixes USB device assignment by vendor:product when running qemu
as non-root (well, it should, but for some reason I couldn't reproduce
the failure people are seeing in [1], but it appears to work properly)
[1] https://bugzilla.redhat.com/show_bug.cgi?id=542450
qemudWaitForMonitor calls qemudReadLogOutput with qemudFindCharDevicePTYs
as callback. qemudFindCharDevicePTYs calls qemudExtractTTYPath to assign
a string to chr->data.file.path. Afterwards qemudWaitForMonitor may call
qemudFindCharDevicePTYsMonitor that overwrites chr->data.file.path without
freeing the old value. This results in leaking the memory allocated by
qemudExtractTTYPath.
Report an OOM error if the strdup in qemudFindCharDevicePTYsMonitor fails.
The -mem-prealloc flag should be used when using large pages
This ensures qemu tries to allocate all required memory immediately,
rather than when first used. The latter mode will crash qemu
if hugepages aren't available when accessed, while the former
should gracefully fallback to non-hugepages.
* src/qemu/qemu_conf.c: add -mem-prealloc flag to qemu command line
when using large pages
The behavior for the qemu balloon device has changed. Formerly, a virtio
balloon device was provided by default. Now, '-balloon virtio' must be
specified on the command line to enable it. This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection
This change makes the 'info chardev' parser ignore any trailing
whitespace on a line. This fixes a specific problem handling a '\r\n'
line ending.
* src/qemu/qemu_monitor_text.c: Ignore trailing whitespace in
'info chardev' output.
