Commit aad3a0b5f altered virObjectEventStateQueueRemote to move
the "if (!event) return" call added in the previous commit 031eb8f6
to virObjectEventStateQueue. Neither commit altered the function
prototype which used ATTRIBUTE_NONNULL(2).
This caused Coverity build problems. Since @event is now checked,
just remove the ATTRIBUTE_NONNULL check from both prototypes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We only formatted the <sev> element when QEMU supported the feature when
in fact we should always format the element to make clear that libvirt
knows about the feature and the fact whether it is or isn't supported
depends on QEMU version, in other words if QEMU doesn't support the
feature we're going to format the following into the domain capabilities
XML:
<sev supported='no'/>
This patch also adjusts the RNG schema accordingly in order to reflect
the proposed change.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some identifiers use Sev, some SEV. Prefer the latter.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, this function changes node for relative XPaths but
doesn't restore the original one in case VIR_ALLOC(def) fails.
Secondly, @type is leaked. Thirdly, dh-cert and session
attributes are strdup()-ed needlessly, virXPathString already
does that so we can use the retval immediately.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adjust the documentation, parser and tests to change:
launch-security -> launchSecurity
reduced-phys-bits -> reducedPhysBits
dh-cert -> dhCert
Also fix the headline in formatdomain.html to be more generic,
and some leftover closing elements in the documentation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We have enough elements using underscores instead of camelCase,
do not bring dashes into the mix.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The typedefs were present twice in the header file which causes failures
with some compilers, eg FreeBSD 10 CLang:
../../src/conf/domain_conf.h:2330:33: error: redefinition of typedef 'virDomainSevDef' is a C11 feature
+[-Werror,-Wtypedef-redefinition]
typedef struct _virDomainSevDef virDomainSevDef;
^
../../src/conf/domain_conf.h:145:33: note: previous definition is here
typedef struct _virDomainSevDef virDomainSevDef;
^
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Formatting of 'driver' already used a separate buffer but was part of
the main function. Separate it and remove bunch of unnecessary temporary
variables.
Note that some checks are removed but they are not really necessary
anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract and refactor the code to use the new approach which allows to
delete a monster condition to check if the element needs to be
formatted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The launch-security element can be used to define the security
model to use when launching a domain. Currently we support 'sev'.
When 'sev' is used, the VM will be launched with AMD SEV feature enabled.
SEV feature supports running encrypted VM under the control of KVM.
Encrypted VMs have their pages (code and data) secured such that only the
guest itself has access to the unencrypted version. Each encrypted VM is
associated with a unique encryption key; if its data is accessed to a
different entity using a different key the encrypted guests data will be
incorrectly decrypted, leading to unintelligible data.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extend hypervisor capabilities to include sev feature. When available,
hypervisor supports launching an encrypted VM on AMD platform. The
sev feature tag provides additional details like Platform Diffie-Hellman
(PDH) key and certificate chain which can be used by the guest owner to
establish a cryptographic session with the SEV firmware to negotiate
keys used for attestation or to provide secret during launch.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU version >= 2.12 provides support for launching an encrypted VMs on
AMD x86 platform using Secure Encrypted Virtualization (SEV) feature.
This patch adds support to query the SEV capability from the qemu.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit id 1bd5a08d added a call to virXMLFormatElement without
also checking the return status.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
It will be used in that file later on, plus it makes sense for all the
implementations to be in same place. Also comment each one of them nicely and
add a comment explaining why they all need to end with the same _LAST value.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to have virResctrlGetInfo() when it must be called after
virResctrlInfoNew() anyway, otherwise it's just an unusable object. When we
wrap the logic inside the New() function we'll save some calls later as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
TSEG (Top of Memory Segment) is one of many regions that SMM (System Management
Mode) can occupy. This one, however is special, because a) most of the SMM code
lives in TSEG nowadays and b) QEMU just (well, some time ago) added support for
so called 'extended' TSEG. The difference to the TSEG implemented in real q35's
MCH (Memory Controller Hub) is that it can offer one extra size to the guest OS
apart from the standard TSEG's 1, 2, and 8 MiB and that size can be selected in
1 MiB increments. Maximum may vary based on QEMU and is way too big, so we
don't need to check for the maximum here. Similarly to the memory size we'll
leave it to the hypervisor to try satisfying that and giving us an error message
in case it is not possible.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using an enum in a struct field, the compiler is free to decide to
make it an unsigned type if it desires. This in turn leads to bugs when
code does
if ((def->foo = virDomainFooTypeFromString(str)) < 0)
...
because 'def->foo' can't technically have an unsigned value from the
compiler's POV. While it is possible to add (int) casts in the code
example above, this is not desirable because it is easy to miss out
such casts. eg the code fixed here caused an error with clang builds
../../src/conf/domain_conf.c:12838:73: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
if ((def->version = virDomainTPMVersionTypeFromString(version)) < 0) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Fix the resrc field for the TPM passthrough case to show tpm.
This fixes the code to follow the documentation.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extend the existing auditing with auditing for the TPM emulator.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
The swtpm process now has --tpm2 as an additional parameter:
system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8 0.0 28364 3868 ? Rs 11:13 13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid
The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only define a TPM 1.2.
Extend the documentation.
Add a test case testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When parsing domain XML the virCapsDomainData lookup is performed
in order to fill in missing def->os.arch and def->os.machine
strings. Well, when doing copy of already existing virDomainDef
we don't want any automagic fill in of defaults (and those two
strings are going to be provided at this point anyway by first
parse of the domain XML).
What is even worse is that we do not look up capabilities for
parsed emulator path rather some generic capabilities for parsed
arch. Therefore, if emulator points to qemu under non-default
path (say $HOME/qemu-system-arm) but there's no such qemu under
the default path (say /usr/bin/qemu-system-arm) the capabilities
lookup fails and creating the copy is denied.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With blockdev support we will need to introspect whether any of the
backing chain members requires PR rather just one of them. Add a helper
and reuse it in virDomainDefHasManagedPR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Always parse the 'tls' source field and let the drivers decide whether
they support it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid the <source> vs. <target> confusion,
change <source auto='no' cid='3'/> to:
<cid auto='no' address='3'/>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This patch fixes the USB input bus check, the bug was introduced by commit 317badb
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There was a missing enum for mdev causing a strange 'unknown device type'
warning when hot-plugging mdev.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1583927
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We need to free return value of virXPathString().
==12962== 37 bytes in 1 blocks are definitely lost in loss record 156 of 331
==12962== at 0x4C2AF0F: malloc (vg_replace_malloc.c:299)
==12962== by 0x91E8439: strdup (in /lib64/libc-2.25.so)
==12962== by 0x5DBD551: virStrdup (virstring.c:977)
==12962== by 0x5DD3E5E: virXPathString (virxml.c:84)
==12962== by 0x5E178AB: virDomainDefParseXML (domain_conf.c:19110)
==12962== by 0x5E1E985: virDomainDefParseNode (domain_conf.c:20885)
==12962== by 0x5E1E7CB: virDomainDefParse (domain_conf.c:20827)
==12962== by 0x5E1E871: virDomainDefParseFile (domain_conf.c:20853)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduced by:
commit d4abb7b45d
conf: introduce <vsock> element
commit b8b42ca036
qemu: add support for vhost-vsock-pci
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a new 'vsock' element for the vsock device.
The 'model' attribute is optional.
A <source cid> subelement should be used to specify the guest cid,
or <source auto='yes'/> should be used.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A type to represent the new vsock device.
Also implement an allocation function to allow future addition
of private data.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove the locks since they are unnecessary and would cause
a hang for a driver reload/restart when a transient pool was
previously active as a result of the call:
virStoragePoolUpdateInactive:
...
if (!virStoragePoolObjGetConfigFile(obj)) {
virStoragePoolObjRemove(driver->pools, obj);
...
stack trace:
Thread 17 (Thread 0x7fffcc574700 (LWP 12465)):
...pthread_rwlock_wrlock
...virRWLockWrite
...virObjectRWLockWrite
...virStoragePoolObjRemove
...virStoragePoolUpdateInactive
...storagePoolUpdateStateCallback
...virStoragePoolObjListForEachCb
...virHashForEach
...virStoragePoolObjListForEach
...storagePoolUpdateAllState
...storageStateInitialize
...virStateInitialize
...daemonRunStateInit
...virThreadHelper
...start_thread
...clone
Introduced by commit id 4b2e0ed6e3.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The status XML parser function virDomainObjParseXML could not pass in
parseOpaque into the post parse callbacks. Add a callback which will
allow hypervisor drivers to fill it from the 'virDomainObj' data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When parsing status XML the post-parse callbacks can't access any
private data present in the status XML as the private bits were parsed
after invoking post-parse callbacks.
Move the invocation so that everything is parsed first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Its only use is now to check for duplicate boot order values,
which is now also done in virDomainDefPostParseCommon.
Remove it completely.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
As the function signature of virDomainDefPostParseInternal does not
differ from virDomainDefPostParse now, the wrapper can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move the check for boot elements into a separate function
and remove its dependency on the parser-supplied bootHash table.
Reconstructing the hash table from the domain definition
effectively duplicates the check for duplicate boot order
values, also present in virDomainDeviceBootParseXML.
Now it will also be run on domains created by other means than XML
parsing, since it will be run even for code paths that did not supply
the bootHash table before.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Further patches will introduce validation and a default setting
of def->os.bootDevs in postParse.
Introduce a feature flag to opt out of this and set it in the vmx
driver, otherwise we would be adding it <boot dev='hd'/> into every
vmx config despite having no way to change it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Report domaincaps <features><genid supported='yes'/> if the guest
config accepts <genid/> or <genid>$GUID</genid>.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The VM Generation ID is a mechanism to provide a unique 128-bit,
cryptographically random, and integer value identifier known as
the GUID (Globally Unique Identifier) to the guest OS. The value
is used to help notify the guest operating system when the virtual
machine is executed with a different configuration.
This patch adds support for a new "genid" XML element similar to
the "uuid" element. The "genid" element can have two forms "<genid/>"
or "<genid>$GUID</genid>". If the $GUID is not provided, libvirt
will generate one and save it in the XML.
Since adding support for a generated GUID (or UUID like) value to
be displayed modifying the xml2xml test to include virrandommock.so
is necessary since it will generate a "known" value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
It will be used when parsing the migration private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce support for codec type 'output' ('hda-output' in QEMU) for ich6
and ich9 sound devices, which only advertises a line-out in the guest.
This has been available in QEMU since 0.14.
Signed-off-by: Filip Alac <filipalac@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
==1589== 7 bytes in 2 blocks are definitely lost in loss record 34 of 261
==1589== at 0x4C2AF0F: malloc (vg_replace_malloc.c:299)
==1589== by 0x8A82794: xmlStrndup (in /usr/lib64/libxml2.so.2.9.8)
==1589== by 0x5DD8392: virXMLPropString (virxml.c:510)
==1589== by 0x5E12427: virDomainMemoryDefParseXML (domain_conf.c:15704)
==1589== by 0x5E207DE: virDomainDefParseXML (domain_conf.c:20351)
==1589== by 0x5E2184F: virDomainDefParseNode (domain_conf.c:20636)
==1589== by 0x5E216A1: virDomainDefParse (domain_conf.c:20580)
==1589== by 0x5E21747: virDomainDefParseFile (domain_conf.c:20606)
==1589== by 0x112F5F: testCompareXMLToArgv (qemuxml2argvtest.c:493)
==1589== by 0x138780: virTestRun (testutils.c:180)
==1589== by 0x117129: mymain (qemuxml2argvtest.c:937)
==1589== by 0x13A83C: virTestMain (testutils.c:1120)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Support OpenGL accelerated rendering when using SDL graphics in the
domain config. Add associated test and documentation.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.
Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU has possibility to call madvise(.., MADV_REMOVE) in some
cases. Expose this feature to users by new element/attribute
discard.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At the same time convert the code to use virXMLFormatElement.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:
<reservations enabled='yes' managed='no'>
<source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
</reservations>
If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:
https://www.redhat.com/archives/libvir-list/2017-November/msg01005.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Everything besides the top of the chain is readonly. Track this when
parsing the XML and detecting the chain from the disk. Also fix the
state when taking snapshots.
All other cases where the top image is changed already preserve the
readonly state from the original image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When adding a new object to the domain object list, there should
have been 2 virObjectRef calls made one for each list into which
the object was placed to match the 2 virObjectUnref calls that
would occur during Remove as part of virHashRemoveEntry when
virObjectFreeHashData is called when the element is removed from
the hash table as set up in virDomainObjListNew.
Some drivers (libxl, lxc, qemu, and vz) handled this inconsistency
by calling virObjectRef upon successful return from virDomainObjListAdd
in order to use virDomainObjEndAPI when done with the returned @vm.
While others (bhyve, openvz, test, and vmware) handled this via only
calling virObjectUnlock upon successful return from virDomainObjListAdd.
This patch will "unify" the approach to use virDomainObjEndAPI
for any @vm successfully returned from virDomainObjListAdd.
Because list removal is so tightly coupled with list addition,
this patch fixes the list removal algorithm to return the object
as entered - "locked and reffed". This way, the callers can then
decide how to uniformly handle add/remove success and failure.
This removes the onus on the caller to "specially handle" the
@vm during removal processing.
The Add/Remove logic allows for some logic simplification such
as in libxl where we can Remove the @vm directly rather than
needing to set a @remove_dom boolean and removing after the
libxlDomainObjEndJob completes as the @vm is locked/reffed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Rather than open code within virDomainObjListRemove, just call
the *Locked function.
Additionally, add comments to virDomainObjListRemove to describe
the usage model.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the FindBy{UUID|Name}Locked helpers which will return a locked
and ref counted object rather than the direct virHashLookup and
virObjectLock of the returned object. We'll need to temporarily
virObjectUnref when we assign a new domain @def, but that will
change shortly when virDomainObjListAddObjLocked returns the
correct reference counted object.
Use the virDomainObjEndAPI in the error path to Unref/Unlock for
the corresponding Unref/Unlock of either the FindBy* return or
the virDomainObjNew since both return a reffed/locked object.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Create helpers virDomainObjListFindByUUIDLocked and
virDomainObjListFindByNameLocked to avoid the need
to lock the domain object list leaving that task
for the caller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is the old style and we really shouldn't be adding any more
examples like this. Add a comment to warn devs away
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<features><vmcoreinfo/> is a bare boolean XML property. We don't really
use this format anymore and instead prefer tristate <X state=on|off/>
since it's required for modeling on/off/default. If for example future
qemu started enabling vmcoreinfo by default we wouldn't have any way
for the user to turn this off.
Convert it to tristate. For writing XML this is semanticly the same,
<vmcoreinfo/> is processed as <vmcoreinfo state='on'/>.
For apps reading guest XML this is technically an API change,
as they might misinterpret <vmcoreinfo state='off'/>, however this
has only been present in libvirt since 3.10.0 and I don't think any
apps are dependent on this yet
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The vm name is not needed for any functional requirement, but it will be
useful when debugging problems to identify which VM is associated with a
filter, since UUID is not human friendly.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainNet struct contains everything related to configuring a
guest network device. Out of all of this info, only 5 fields are
relevant to configuring network filters. It will be more convenient for
future changes to the nwfilter driver if the relevant fields are kept in
a dedicated struct. Thus the virNWFilterBinding struct is created to
track this information.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a bunch of left over code in the nwfilter driver related to
monitoring firewalld over dbus, that is no longer used since the
conversion to use virFirewall APIs.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All the code now just uses the virHashTablePtr type directly.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This removes the virNWFilterHashTableFree, virNWFilterHashTablePut
and virNWFilterHashTableRemove methods, in favour of just calling
the virHash APIs directly.
The virNWFilterHashTablePut method was unreasonably complex because
the virHashUpdateEntry already knows how to create the entry if it
does not currently exist.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNWFilterHashTable struct only contains a single virHashTable
member since
commit 293d4fe2f1
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Mar 24 16:35:23 2014 +0000
Remove pointless storage of var names in virNWFilterHashTable
Thus, this struct wrapper adds no real value over just using the
virHashTable directly, but brings the complexity of needing to derefence
the hashtable to call virHash* APIs, and adds extra memory allocation
step.
To minimize code churn this just turns virNWFilterHashTable into a
typedef aliases virHashTable.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Enable the TPM CRB to be specified in the domain XML. This
now allows to describe the TPM device like this:
<tpm model='tpm-crb'>
<backend type='passthrough'>
<device path='/dev/tpm0'/>
</backend>
</tpm>
Extend the XML schema to also allow tpm-crb.
Extend the documentation.
Add a test case for testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Although legal, a few paths were not checking a return value < 0
for failure instead they checked a non zero failure.
Clean them all up to be consistent.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1569678
On some large systems (with ~400GB of RAM) it is possible for
unsigned int to overflow in which case we report invalid number
of 4K pages pool size. Switch to unsigned long long.
We hit overflow in virNumaGetPages when doing:
huge_page_sum += 1024 * page_size * page_avail;
because although 'huge_page_sum' is an unsigned long long, the
page_size and page_avail are both unsigned int, so the promotion
to unsigned long long doesn't happen until the sum has been
calculated, by which time we've already overflowed.
Turning page_avail into a unsigned long long is not strictly
needed until we need ability to represent more than 2^32
4k pages, which equates to 16 TB of RAM. That's not
outside the realm of possibility, so makes sense that we
change it to unsigned long long to avoid future problems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The attribute can be used to disable ROM loading completely
for a device.
This might be needed because, even when the guest is configured
such that the PCI ROM will not be loaded in the PCI BAR, some
hypervisors (eg. QEMU) might still make it available to the
guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS)
will consume, thus not achieving the desired result.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Rework the code such that virDomainObjListFindByID will always
return a locked/ref counted object so that the callers can
always do the same cleanup logic to call virDomainObjEndAPI.
Makes accessing the objects much more consistent.
NB:
There were 2 callers (lxcDomainLookupByID and qemuDomainLookupByID)
that were already using the ByID name, but not virDomainObjEndAPI -
these were changed as well in this update/patch.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Now that every caller is using virDomainObjListFindByUUIDRef,
let's just remove it and keep the name as virDomainObjListFindByUUID.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Commit id '43f2ccdc' called virDomainDiskSourceDefFormatInternal
rather than formatting the the disk source inline. However, it
did not handle the case where the helper failed. Over time the
helper has been renamed to virDomainDiskSourceFormat. Similar to
other consumers, if virDomainDiskSourceFormat fails, then the
formatting could be off, so it's better to fail than to continue
on with some possibly bad data. Alter the function and the caller
to check status and jump to error in that case.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Drop the checking of 'shared' from the ABI stability check. This
property controls whether the hypervisor allows concurrent access to the
same file, but this fact does not influence guest ABI.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Currently it is not used in backing chains and does not seem that we
will need to use it so return it back to the disk definition. Thankfully
most accesses are done via the accessors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Replace direct usage of disk->src->driverName with the existing
accessors. The parser code where we assign the driver from XML is
intentionally not fixed to save an allocation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add a function named virDomainObjCheckIsActive in src/conf/domain_conf.c.
It calls virDomainObjIsActive, raises error if necessary and returns.
There is a lot of occurence of this pattern and it will save 3 lines on
each call.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
So far we are repeating the following lines over and over:
if (!(virSomeObjectClass = virClassNew(virClassForObject(),
"virSomeObject",
sizeof(virSomeObject),
virSomeObjectDispose)))
return -1;
While this works, it is impossible to do some checking. Firstly,
the class name (the 2nd argument) doesn't match the name in the
code in all cases (the 3rd argument). Secondly, the current style
is needlessly verbose. This commit turns example into following:
if (!(VIR_CLASS_NEW(virSomeObject,
virClassForObject)))
return -1;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In next patches this name will be needed for a different memeber.
Also, it makes sense to rename the variable because it does not
contain reference to parent device, just its name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If a function is disposing virSomething it should be called
virSomethingDispose(). There are two offenders:
virCapabilitiesDispose(virCapsPtr) and
virDomainXMLOptionClassDispose(virDomainXMLOptionPtr).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In 2ada9ef146 we've tried to turn virDomainChrSourceDef into
virObject. Well, this requires 'virObject' member to be stored on
the first position of the struct. This adjustment is missing in
the original commit leading to all sorts of funny memleaks and
data corruptions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Let's use object referencing to handle the ChrSourceDef. A subsequent
patch then can allow the monConfig to take an extra reference before
dropping the domain lock to then ensure nothing free's the memory that
needs to be used.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Rather than VIR_ALLOC, use the New function for allocation. We
already use the Free function anyway.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Rather than using VIR_ALLOC, use the New API since we already
use the virDomainChrSourceDefFree function when done.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
I haven't been able to come up with a single scenario in which
the code in question would be executed; even if there was one,
it would be due to the user specifying a *partial* PCI topology
in the guest XML, which is of course entirely unsupportable and
thus providing even the slightest hint that doing so is in any
way a good idea is actively harmful.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If the virHashAddEntry fails, then we need to "careful" about
how we free the @obj. When virDomainObjParseFile returns there
is one reference and the object is locked, so use virDomainObjEndAPI
when done.
Add a virObjectRef in the error path for the second virHashAddEntry
call since it doesn't call virObjectRef, but virHashRemoveEntry
will call virObjectUnref because virObjectFreeHashData is called
when the element is removed from the hash table as set up in
virDomainObjListNew.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the virHashAddEntry fails, then we need to "careful" about
how we free the @vm. When virDomainObjNew returns there is one
reference and the object is locked, so use virDomainObjEndAPI
when done.
Add a virObjectRef in the error path for the second virHashAddEntry
call since it doesn't call virObjectRef, but virHashRemoveEntry
will call virObjectUnref because virObjectFreeHashData is called
when the element is removed from the hash table as set up in
virDomainObjListNew.
Eventually these paths should goto error and error should be changed
to use EndAPI as well, but that requires more adjustments to other
paths in the code to have a locked and ref counted @vm.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Both pcie-to-pci-bridge and dmi-to-pci-bridge can be used to
create a traditional PCI topology in a pure PCIe guest such as
those using the x86_64/q35 or aarch64/virt machine type;
however, the former should be preferred, as it doesn't need to
obey limitation of real hardware and is completely
architecture-agnostic.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1520821
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Just like the existing areMultipleRootsSupported, this will
allow us to change the results of the driver-agnostic PCI
address allocation logic based on whether the QEMU binary
supports certain features.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new controller will not yet be used automatically by
libvirt, but at this point it's already possible to configure
a guest to use it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We're going to add a similarly-named attribute later, and we'd
like to be consistent.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For some reason we've decided to silently translate the disk
detect_zeroes mode if it would be invalid. Extract the
logic so that it does not need to be copypasta'd across the code base.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
In some use cases (mostly in tests) it is not required to check the
seclabel definition validity. Add possibility to call
virDomainDiskDefParse without the domain definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Make the function more usable by returning the full disk definition and
fix the only caller for the new semantics. The new name for the function
is virDomainDiskDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Do not crash in virDomainDeviceInfoParseXML if someone provides
an 'alias' element without a 'name' attribute.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In previous releases all these methods were a no-op if the network
driver is disabled. These helper methods are called unconditionally for
all types of network interface, so must be no-ops if missing. Other code
will already generate an error if the network driver is disabled and a
NIC with type=network is used.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1556828
When defining a domain that has <interface type='hostdev'/> our
parser creates two entries in virDomainDef: one for <interface/>
and one for <hostdev/>. However, some info is shared between the
two which makes user alias validation fail because alias belongs
to the set of shared info.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Split out the parser and separate it from the private data part so that
it can be later reused in other parts of the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since seclabels are formatted along with the source element and will
also make sense to be passed for the backing chain we should parse them
in the place where we parse the disk source. Same applies for
validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Rather than checking that the security label is legal when parsing it
move the code into a separate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since we already parse the <backingStore> of a disk source, we should
also validate the configuration for the whole backing chain and not only
for the top level image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Move out formatting of 'startuPolicy' which is a property of the disk
out of the <source> element. Extracting the code formating the content
and attributes will also allow reuse in other parts of the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The wrapper functionality can be moved to the only user
virDomainDiskSourceFormatInternal. Also removes comment which does not
reflect the truth any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that the function is using virXMLFormatElement we don't need to
conditionally format anything, since we'll format the element according
to the presence of content.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Clang 6.0.0 complains when initializing structure with { NULL }:
conf/domain_addr.c:1494:38: error: missing field 'type' initializer [-Werror,-Wmissing-field-initializers]
virDomainDeviceInfo nfo = { NULL };
Use { 0 } instead to make it happy.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1553162
When validating a device XML config we check if user provided
alias is unique. We do this by maintaining a hash table of device
aliases as we iterated over all devices defined for the domain.
However, it may happen that what appears as two devices in domain
XML is in fact just one interface in hypervisor. We can assume
libvirt generated aliases to be unique and thus really check user
provided ones only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1553075
For some weird reason this function is getting live and
persistent def for domain but then accesses vm->def and
vm->newDef directly. This is rather unsafe as we can be
accessing NULL pointer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the user tries to define a domain that has
<controller type='usb' model='none'/>
and also some USB devices, we report an error:
error: internal error: No free USB ports
Which is technically still correct for a domain with no USB ports.
Change it to:
USB is disabled for this domain, but USB devices are present in the domain XML
https://bugzilla.redhat.com/show_bug.cgi?id=1347550
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Pretty much any reasonable compiler would do this automatically,
but there's no harm in being explicit about it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
We allow the postParse callbacks to fail for some reasons (missing
emulator binary) when parsing the configs from /etc/libvirt.
In that case, def->postParseFailed is set to true and the post
parse callbacks are re-executed on domain startup.
However this bool was only set when virDomainDefPostParse was called
with the ALLOW_POST_PARSE_FAIL flag set. If the callback failed
again on domain startup, the bool would be reset and subsequent
startups would not attempt to reexecute the callback.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit id 'edae027c' blindly assumed that the passed @oldDev
parameter would not be NULL when calling virDomainDeviceGetInfo;
however, commit id 'b6a264e8' passed NULL for AttachDevice
callers under the premise that there wouldn't be a device
to check/update against.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit v3.7.0-14-gc57f3fd2f8 prevented adding a <boot order='x'/>
element to an inactive domain with global <boot dev='...'/> element.
However, as a result of that change updating any device with boot order
would fail with 'boot order X is already used by another device', where
"another device" is in fact the device which is being updated.
To fix this we have to ignore the device which we're about to update
when checking for boot order conflicts.
https://bugzilla.redhat.com/show_bug.cgi?id=1546971
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When calling virDomainDefCompatibleDevice to check a new device during
device update, we need to pass the original device which is going to be
updated in addition to the new device. Otherwise, the function can
report false conflicts.
The new argument is currently ignored by virDomainDefCompatibleDevice,
but this will change in the following patch.
https://bugzilla.redhat.com/show_bug.cgi?id=1546971
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Rather than having the caller check, if the input @addrs is NULL
(e.g. priv->usbaddrs), then just return 0. This also removes the
need for ATTRIBUTE_NONNULL which only really helped if someone
passed a NULL as a parameter not if the passed parameter is NULL.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than having the caller check, if the input @addrs is NULL
(e.g. priv->usbaddrs), then just return 0. This also removes the
need for ATTRIBUTE_NONNULL which only really helped if someone
passed a NULL as a parameter not if the passed parameter is NULL.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Ensure all enum cases are listed in switch statements, or cast away
enum type in places where we don't wish to cover all cases.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ensure all enum cases are listed in switch statements.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The controller model is slightly unusual in that the default value is
-1, not 0. As a result the default value is not covered by any of the
existing enum cases. This in turn means that any switch() statements
that think they have covered all cases, will in fact not match the
default value at all. In the qemuDomainDeviceCalculatePCIConnectFlags()
method this has caused a serious mistake where we fallthrough from the
SCSI controller case, to the VirtioSerial controller case, and from
the USB controller case to the IDE controller case.
By adding explicit enum constant starting at -1, we can ensure switches
remember to handle the default case.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This function returns nothing but zero. Therefore it makes no
sense to have it returning an integer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If formatting of storage encryption or private data fails we must
jump to the error label instead of returning immediately
otherwise @attrBuf and @childBuf might be leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 7e62c4cd26 (first appearing in libvirt-3.9.0 as a resolution
to rhbz #1343919) added a "generated" attribute to virMacAddr that was
set whenever a mac address was auto-generated by libvirt. This
knowledge was used in a single place - when trying to match a NetDef
from the Domain to Delete with user-provided XML. Since the XML parser
always auto-generates a MAC address for NetDefs when none is provided,
it was previously impossible to make a search where the MAC address
isn't significant, but the addition of the "generated" attribute made
it possible for the search function to ignore auto-generated MACs.
This implementation had a problem though - it was adding a field to a
"low level" struct - virMacAddr - which is used in other places with
the assumption that it contains exactly a 6 byte MAC address and
nothing else. In particular, virNWFilterSnoopEthHdr uses virMacAddr as
part of the definition of an ethernet packet header, whose layout must
of course match an actual ethernet packet. Adding the extra bools into
virNWFilterSnoopEthHdr caused the nwfilter driver's "IP discovery via
DHCP packet snooping" functionality to mysteriously stop working.
In order to fix that behavior, and prevent potential future similar
odd behavior, this patch moves the "generated" member out of
virMacAddr (so that it is again really is just a MAC address) into
virDomainNetDef, and sets it only when virDomainNetGenerateMAC() is
called from virDomainNetDefParseXML() (which is the only time we care
about it).
Resolves: https://bugzilla.redhat.com/1529338
(It should also be applied to any maintenance branch that applies
commit 7e62c4cd26 and friends to resolve
https://bugzilla.redhat.com/1343919)
Signed-off-by: Laine Stump <laine@laine.org>
Rather than expecting callers to pass a virConnectPtr into the
virDomainDiskTranslateSourcePool() method, just acquire a connection
to the storage driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we have the ability to easily open connections to secondary
drivers, eg network:///system, it is possible to reimplement the
virDomainNetResolveActualType method in terms of the public API. This
avoids the need to have the network driver provide a callback for it.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This type of information defines attributes of a system
chassis, such as SMBIOS Chassis Asset Tag.
access inside VM (for example)
Linux: /sys/class/dmi/id/chassis_asset_tag.
Windows: (Get-WmiObject Win32_SystemEnclosure).SMBIOSAssetTag
wirhin Windows PowerShell.
As an example, add the following to the guest XML
<chassis>
<entry name='manufacturer'>Dell Inc.</entry>
<entry name='version'>2.12</entry>
<entry name='serial'>65X0XF2</entry>
<entry name='asset'>40000101</entry>
<entry name='sku'>Type3Sku1</entry>
</chassis>
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of storing separately whether the feature is enabled
or not and what resizing policy should be used, store both of
them in a single place.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of storing separately whether the feature is enabled
or not and what driver should be used, store both of them in
a single place.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There are a few stray checks which still live outside of the
switch in virDomainDefFeaturesCheckABIStability() for no good
reason. Move them inside the switch, and update the error
messages to be consistent while at it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Unlike most other features, VIR_DOMAIN_FEATURE_CAPABILITIES is
of type virDomainCapabilitiesPolicy instead of virTristateSwitch,
so we need to handle it separately for the error message to make
sense.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The compiler can make sure we are handling all features.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The virStorageTranslateDiskSourcePool method modifies a virDomainDiskDef
to resolve any storage pool reference. For some reason this was added
into the storage driver code, despite working entirely in terms of the
public APIs. Move it into the domain conf file and rename it to match the
object it modifies.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver will call directly into the network driver
impl to modify resolve the atual type of NICs with type=network. It
has todo this before it has allocated the actual NIC. This introduces
a callback system to allow us to decouple the QEMU driver from the
network driver.
This is a short term step, as it ought to be possible to achieve the
same end goal by simply querying XML via the public network API. The
QEMU code in question though, has no virConnectPtr conveniently
available at this time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver will call directly into the network driver
impl to modify network device bandwidth for interfaces with
type=network. This introduces a callback system to allow us to decouple
the QEMU driver from the network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently virt drivers will call directly into the network driver impl
to allocate domain interface devices where type=network. This introduces
a callback system to allow us to decouple the virt drivers from the
network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
NUMA distances are part of guest ABI (guests can read it
directly!) and therefore as such shouldn't change throughout the
lifetime of domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virt-aa-helper fails to parse the xmls with the memory/cpu
hotplug features or user assigned aliases. Set the features in
xmlopt->config for the parsing to succeed.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The function only reduces the size of the bitmap thus we can use the
appropriate shrinking function which also does not have any return
value.
Since virBitmapShrink now does not return any value callers need to be
fixed as well.
Remove the unnecessary check as since commit id '46a811db07' it is
not possible to add or alter a filter using the same name, but with
a different UUID.
NB: It's not required to provide a UUID for a filter by name, but
if one is provided, then it must match the existing. If not provided,
then one is generated during ParseXML processing.
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Some of the other functions depend on the fact that unused bits and longs are
always zero and it's less error-prone to clear it than fix the other functions.
It's enough to zero out one piece of the map since we're calling realloc() to
get rid of the rest (and updating map_len).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1540817
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Modify OPERATION_FAILED and INTERNAL_ERROR error codes to
use DEVICE_MISSING instead for failures associated with the
inability to find the device. This makes it easier for consumers
to key off the error code rather than the error message.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When an implicit controller is added, the model is defined as -1
(IOW: undefined). So, if an implicit SCSI controller was added,
can set the model to the default value if the underlying hypervisor
supports it.
As it turns out virDomainDeviceFindControllerModel was only ever
called for SCSI controllers using VIR_DOMAIN_CONTROLLER_TYPE_SCSI
as a parameter.
So rename to virDomainDeviceFindSCSIController and rather than
return a model, let's return a virDomainControllerDefPtr to let
the caller reference whatever it wants.
The <capabilities> feature has an attribute named 'policy', but the
error message mentioned the non-existing 'state' attribute instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commits f83c7c88 and 6eb1f2b9 broke the build on FreeBSD and OSX because
of symbols being undefined for those platforms.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Just like SRIOV, a PCI device is only capable of the mediated devices
framework when it's bound to the vendor native driver, thus if a driver
change occurs, e.g. vendor_native->vfio, we need to refresh some of the
device's capabilities to reflect the reality, mdev included.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Suggested-by: Wu Zongyong <cordius.wu@huawei.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Now that we have all the building blocks in place, switch the nodedev
driver to use the "new" virMediatedDeviceType type instead of the "old"
virNodeDevCapMdevType one.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Most of them are static, however in case of PCI and SCSI_HOST devices,
the nested capabilities can change dynamically, e.g. due to a driver
change (from host_pci_driver -> vfio_pci).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Suggested-by: Wu Zongyong <cordius.wu@huawei.com>
Whether asking for a number of capabilities supported by a device or
listing them, it's handled essentially by a copy-paste code, so extract
the common stuff into this new helper which also updates all
capabilities just before touching them.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since we moved the helpers from nodedev driver to src/conf, the actual
'update' function using those helpers should be moved as well so that we
don't need to call back into the driver.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The capabilities are defined/parsed/formatted/queried from this module,
no reason for 'update' not being part of the module as well. This also
involves some module-specific prefix changes.
This patch also drops the node_device_linux_sysfs module from the repo
since:
a) it only contained the capability handlers we just moved
b) it's only linked with the driver (by design) and thus unreachable to
other modules
c) we touch sysfs across all the src/util modules so the module being
deleted hasn't been serving its original intention for some time already.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch drops the capability matching redundancy by simply converting
the string input to our internal types which are then in turn used for
the actual capability matching.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We currently have 2 methods that do the capability matching. This should
be condensed to a single function and all the derivates should just call
into that using a proper type conversion.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We currently have 2 methods that do the capability matching. This should
be condensed to a single function and all the derivates should just call
into that using a proper type conversion.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashes or restarts, the QEMU process should be reconnected to
OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
More info in the documentation, this is basically the XML parsing/formatting
support, schemas, tests and documentation for the new cputune/cachetune element
that will get used by following patches.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The OEM strings table in SMBIOS allows the vendor to pass arbitrary
strings into the guest OS. This can be used as a way to pass data to an
application like cloud-init, or potentially as an alternative to the
kernel command line for OS installers where you can't modify the install
ISO image to change the kernel args.
As an example, consider if cloud-init and anaconda supported OEM strings
you could use something like
<oemStrings>
<entry>cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/</entry>
<entry>anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os</entry>
</oemStrings>
use of a application specific prefix as illustrated above is
recommended, but not mandated, so that an app can reliably identify
which of the many OEM strings are targetted at it.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Qemu 2.11 allows case-insensitive specification of CPU models.
This patch fixes the resulting problems on (at least) POWER
arch machines so that Power8 and POWER8 are not different.
Signed-off-by: Scott Garfinkle <scottgar@linux.vnet.ibm.com>
Alter the volume logic to use the hash tables instead of forward
linked lists. There are three hash tables to allow for fast lookup
by name, target.path, and key.
Modify the virStoragePoolObjAddVol to place the object in all 3
tables if possible using self locking RWLock on the volumes object.
Conversely when removing the volume, it's a removal of the object
from the various hash tables.
Implement functions to handle remote ForEach and Search Volume
type helpers. These are used by the disk backend in order to
facilitate adding a primary, extended, or logical partition.
Implement the various VolDefFindBy* helpers as simple (and fast)
hash lookups. The NumOfVolumes, GetNames, and ListExport helpers
are all implemented using standard for each hash table calls.
Prepare for hash table volume lists by creating the object infrastructure
for a Volume Object and Volume Object List
The _virStorageVolObj will contain just a pointer to the "current"
(and live) volume definition.
The _virStorageVolObjList will contain three hash tables, one for
each of the lookup options allowed for a volume.
A microcode update can cause the CPUID bits to change; an example
from the past was the update that disabled TSX on several Haswell and
Broadwell machines.
In order to track the x86 microcode version in the QEMU capabilities,
we have to fetch it and store it in the host CPU. This also makes the
version visible in "virsh capabilities", which is a nice side effect.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1519130
Commit id 'dc692438' reverted the automagic addition of a SCSI
controller attempt during virDomainHostdevAssignAddress; however,
the logic to determine where to place the next_unit depended upon
the "new" controller being added. Without the new controller the
the next time through the call for the next SCSI hostdev found
would result in the "next_unit" never changing from 0 (zero) and
as a result the addition of the device will fail due to being a
duplicate unit number of the first with the error message:
virDomainDefCheckDuplicateDriveAddresses:$line : unsupported
configuration: SCSI host address controller='0' bus='1'
target='0' unit='0' in use by another SCSI host device
So instead of walking the controller list looking for SCSI
controllers, all we can do is "pretend" that they exist and
allow other code to create them later as necessary.
In virDomainDefMaybeAddHostdevSCSIcontroller when we add a new
controller because someone neglected to add one or we're adding
one because the existing one is full, we should copy over the
model number from the existing controller since whatever we
create should at least have the same characteristics as the one
we cannot use because it's full.
NB: This affects the existing hostdev-scsi-autogen-address test
which would add a default ('lsi') SCSI controller for the various
scsi_host's that would create a controller for the hostdev.
VM drivers may need to store additional private data to the status XML
so that it can be restored after libvirtd restart. Since not everything
is needed add a callback infrastructure, where VM drivers can add only
stuff they need.
Note that the private data is formatted as a <privateData> sub-element
of the <disk> or <backingStore> <source> sub-element. This is done since
storing it out of band (in the VM private data) would require a complex
matching process to allow to put the data into correct place.
Now that we have a private storage pool list, we can take the next
step and convert to using objects. In this case, we're going to use
RWLockable objects (just like every other driver) with two hash
tables for lookup by UUID or Name.
Along the way the ForEach and Search API's will be adjusted to use
the related Hash API's and the various FindBy functions altered and
augmented to allow for HashLookup w/ and w/o the pool lock already
taken.
After virStoragePoolObjRemove we will need to virObjectUnref(obj)
after to indicate the caller is "done" with it's reference. The
Unlock occurs during the Remove.
The NumOf, GetNames, and Export functions all have their own callback
functions to return the required data and the FindDuplicate code
can use the HashSearch function callbacks.
Clean up the style a bit w/r/t to not using a unary operator on an
integer value that could be zero - compare vs. zero instead.
Set the def->mem_nodes[*].distances to rdist or ldist inside the
if condition - no need to set outside since the value being set
to is what was fetched.
During cleanup, be sure to initialize the ndistances on error and
use the < 0 comparison not the unary one.
==1277== 8 bytes in 4 blocks are definitely lost in loss record 39 of 131
==1277== at 0x4C2AEDF: malloc (vg_replace_malloc.c:299)
==1277== by 0x68BBBC8: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==1277== by 0x53B1DC2: virXMLPropString (virxml.c:510)
==1277== by 0x53D696A: virDomainDiskBackingStoreParse (domain_conf.c:8639)
==1277== by 0x53DA684: virDomainDiskDefParseXML (domain_conf.c:9590)
==1277== by 0x53F619F: virDomainDefParseXML (domain_conf.c:19233)
==1277== by 0x53F96EE: virDomainDefParseNode (domain_conf.c:20083)
==1277== by 0x53F9540: virDomainDefParse (domain_conf.c:20027)
==1277== by 0x53F95E6: virDomainDefParseFile (domain_conf.c:20053)
==1277== by 0x44D1D4: testCompareDomXML2XMLFiles (testutils.c:1265)
==1277== by 0x42FC7C: testXML2XMLActive (qemuxml2xmltest.c:71)
==1277== by 0x44AD20: virTestRun (testutils.c:180)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
==861== 3 bytes in 1 blocks are definitely lost in loss record 3 of 168
==861== at 0x4C2AEDF: malloc (vg_replace_malloc.c:299)
==861== by 0x8C7FBC8: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==861== by 0x5DCCDC2: virXMLPropString (virxml.c:510)
==861== by 0x5DF1232: virDomainDiskSourceNetworkParse (domain_conf.c:8445)
==861== by 0x5DF1728: virDomainDiskSourceParse (domain_conf.c:8576)
==861== by 0x5DF41A5: virDomainDiskDefParseXML (domain_conf.c:9238)
==861== by 0x5E1119F: virDomainDefParseXML (domain_conf.c:19233)
==861== by 0x5E146EE: virDomainDefParseNode (domain_conf.c:20083)
==861== by 0x5E14540: virDomainDefParse (domain_conf.c:20027)
==861== by 0x5E145E6: virDomainDefParseFile (domain_conf.c:20053)
==861== by 0x4053CC: testCompareXMLToArgv (qemuxml2argvtest.c:455)
==861== by 0x41F135: virTestRun (testutils.c:180)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The graphics code is complex and there are a lot of exceptions and
backward compatible combinations. One of them is the possibility
to configure "spice_auto_unix_socket" in qemu.conf which will convert
all spice graphics with listen type "address" without any address
specified to listen type "socket" when the guest is started.
We don't format this generated socket into migratable XML to make
migration work with older libvirt. However, spice has another
exception that if autoport='no' and there is no port configured
it is converted to listen type "none". Because of this we need
to format autoport='yes' to make sure that the listen type will
be the same as the offline XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511407
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This information will be used to select, and store in the guest
configuration in order to guarantee ABI stability, the concrete
(hypervisor-specific) model for serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Formatting the <target/> element for serial devices will become a
bit more complicated later on, and leaving the fallthrough behavior
there would do nothing but complicate it further.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Make the switch statement type-aware, avoid calling
virDomainChrTargetTypeToString() more than once and check its
return value before using it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function can fail, but none of the caller were accounting
for that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We don't need to store the return value since we never modify it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move formatting of the <target/> element for char devices out of
virDomainChrDefFormat() and into its own function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This attribute was used to decide whether to format the type
attribute of the <target> element, but the logic didn't take into
account all possible cases and as such could lead to unexpected
results. Moreover, it's one more thing to keep track of, and can
easily fall out of sync with other attributes.
Now that we have VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE, we can
use that value to signal that no specific target type has been
configured for the serial device and as such the attribute should
not be formatted at all. All other values are now formatted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is the first step in getting rid of the assumption that
isa-serial is the default target type for serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The devicePostParse() callback is invoked for all devices so that
drivers have a chance to set their own specific values; however,
virDomainDefAddImplicitDevices() runs *after* the devicePostParse()
callbacks have been invoked and can add new devices, in which case
the driver wouldn't have a chance to customize them.
Work around the issue by invoking the devicePostParse() callback
after virDomainDefAddImplicitDevices(), only for the first serial
devices, which might have been added by it. The same was already
happening for the first video device for the very same reason.
This will become important later on, when we will change
virDomainDefAddConsoleCompat() not to set a targetType for
automatically added serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rather than picking apart the two pieces we need/want (path, hosts,
and auth)- let's allocate/use a virStorageSourcePtr for iSCSI storage.
The end result is that qemuBuildSCSIiSCSIHostdevDrvStr doesn't need
to "fake" one for the qemuBuildNetworkDriveStr call.
Create an API to search through the storage pool objects looking for
a specific truism from a callback API in order to return the specific
storage pool object that is desired.
Create an API to walk the pools->objs[] list in order to perform a
callback function for each element of the objs array that doesn't care
about whether the action succeeds or fails as the desire is to run the
code over every element in the array rather than fail as soon as or if
one fails.
For now it'll just call the virStoragePoolObjUnlock, but a future
adjustment will do something different. Since the new API will check
for a NULL object before the Unlock call, callers no longer need to
check for NULL before calling.
The virStoragePoolObjUnlock is now private/static to virstorageobj.c
with a short term forward reference.
The function returns true/false depending on distance
configuration being present in the domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There's no point in checking if numa->mem_nodes[node].ndistances
is set if we check for numa->mem_nodes[node].distances. However,
it makes sense to check if the sibling node (@cellid) caller
passed falls within boundaries.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The compiler can warn us if we add a value to the
virDomainChrSerialTargetType enumeration but forget to handle
it properly in the code. Let's take advantage of that.
This commit is best viewed with 'git diff -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Because the cache banks are initialized based on the order in which their
respective directories exist on the filesystem, they can appear in different
order. This is here mainly for tests because the cache directory might have
different order of children nodes and tests would fail otherwise. It should not
be the case with sysfs, but one can never be sure. And this does not take
almost any extra time, mainly because it gets initialized once per driver.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is similar to the virDomainQemuMonitorCommand API, it can change
the domain state in a way that libvirt may not understand.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The terminator would not be parsed properly since the XPath selector was
looking for an populated element, and also the code did not bother
assigning the terminating virStorageSourcePtr to the backingStore
property of the parent.
Some tests would catch it if there wasn't bigger fallout from the change
to backing store termination in a693fdba01. Fix them properly now.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509110
https://bugzilla.redhat.com/show_bug.cgi?id=1497410
This reverts commit bc8a99ef06.
The vhostuser is not a TAP. Therefore our QoS code is not able to
set any bandwidth. I don't really understand what I was thinking.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add support for describing NUMA distances in a domain's <numa> <cell>
XML description.
Below is an example of a 4 node setup:
<cpu>
<numa>
<cell id='0' cpus='0-3' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='10'/>
<sibling id='1' value='21'/>
<sibling id='2' value='31'/>
<sibling id='3' value='21'/>
</distances>
</cell>
<cell id='1' cpus='4-7' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='21'/>
<sibling id='1' value='10'/>
<sibling id='2' value='21'/>
<sibling id='3' value='31'/>
</distances>
</cell>
<cell id='2' cpus='8-11' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='31'/>
<sibling id='1' value='21'/>
<sibling id='2' value='10'/>
<sibling id='3' value='21'/>
</distances>
<cell id='3' cpus='12-15' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='21'/>
<sibling id='1' value='31'/>
<sibling id='2' value='21'/>
<sibling id='3' value='10'/>
</distances>
</cell>
</numa>
</cpu>
A <cell> defines a NUMA node. <distances> describes the NUMA distance
from the <cell> to the other NUMA nodes (the <sibling>s). For example,
in above XML description, the distance between NUMA node0 <cell id='0'
...> and NUMA node2 <sibling id='2' ...> is 31.
Valid distance values are '10 <= value <= 255'. A distance value of 10
represents the distance to the node itself. A distance value of 20
represents the default value for remote nodes but other values are
possible depending on the physical topology of the system.
When distances are not fully described, any missing sibling distance
values will default to 10 for local nodes and 20 for remote nodes.
If distance is given for A -> B, then we default B -> A to the same
value instead of 20.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Libvirt historically stores storage source path including the volume as
one string in the XML, but that is not really flexible enough when
dealing with the fields in the code. Previously we'd store the slash
separating the two as part of the image name. This was fine for gluster
but it's not necessary and does not scale well when converting other
protocols.
Don't store the slash as part of the path. The resulting change from
absolute to relative path within the gluster driver should be okay,
as the root directory is the default when accessing gluster.
This function works over domain definition and not domain object.
Its name is thus misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When coverage build is enabled, gcc complains about it:
In file included from qemu/qemu_agent.h:29:0,
from qemu/qemu_driver.c:47:
qemu/qemu_driver.c: In function 'qemuDomainSetInterfaceParameters':
./conf/domain_conf.h:3397:1: error: inlining failed in call to
'virDomainNetTypeSharesHostView': call is unlikely and code size would
grow [-Werror=inline]
virDomainNetTypeSharesHostView(const virDomainNetDef *net)
^
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Since vhostuser type is really a tap that is just plugged into
different type of bridge, supporting QoS is trivial.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When adding CPU usability blockers I forgot to properly free them when
in virDomainCapsCPUModelsDispose.
Reported-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We need to format alias even for inactive XMLs since that's the
way how users are going to identify their devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
They have to be unique within the domain. As usual, backwards
compatibility takes its price. In this particular situation we
have a device that is represented twice in a domain and so is its
alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If driver that is calling the parse supports user supplied
aliases, they can be parsed even for inactive XMLs. However, to
avoid any clashes with aliases that libvirt generates, the user
ones have to have "ua-" prefix.
Note, that some drivers don't have notion of device aliases at
all. Also, in order to support user supplied aliases some extra
checks need to be done (e.g. during hotplug). Therefore we can't
just enable this feature for all the drivers. Thus we need a flag
that drivers set to tell parsing code that they can handle user
supplied device aliases.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduced by 6094d6ec7f.
Found by running libvirt-perl tests.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Rather than a forward linked list, let's use the virHashTable in
order to manage the objsName data.
Requires numerous changes from List to Object management similar to
many other drivers/vir*obj.c modules
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
This function is going to make decisions based on the features
set per each driver. For that we need the virDomainXMLOption
object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It looks like the error message was copied from virsh, because
that's where we have @ctl. Nevertheless, it's @flags which is
invalid, not @ctl.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is one limitation for using this API, when the guest is started
with all actions set to "destroy" we put "-no-reboot" on the QEMU
command line. That cannot be changed while QEMU is running and
the QEMU process is always terminated no matter what is configured
for any action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1460677
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There is no need to have two different enums where one has the same
values as the other one with some additions.
Currently for on_poweroff and on_reboot we allow only subset of actions
that are allowed for on_crash. This was covered in parse time using
two different enums. Now to make sure that we don't allow setting
actions that are not supported we need to check it while validating
domain config.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Even though hal doesn't make use of it, the privileged flag is related
to the daemon/driver rather than the backend actually used.
While at it, get rid of some tab indentation in the driver state struct.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
So we have a syntax-check rule to catch all tab indents but it naturally
can't catch tab spacing, i.e. as a delimiter. This patch is a result of
running 'vim -en +retab +wq'
(using tabstop=8 softtabstop=4 shiftwidth=4 expandtab) on each file from
a list generated by the following:
find . -regextype gnu-awk \
-regex ".*\.(rng|syms|html|s?[ch]|py|pl|php(\.code)?)(\.in)?" \
| xargs git grep -lP "\t"
Signed-off-by: Erik Skultety <eskultet@redhat.com>
If same boot order is specified twice (or more) in domain xml
we call free for uninitiaziled loadparm on cleanup in virDomainDeviceBootParseXML
and SIGABRT (or similar) as a result.
Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.
The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.
Add helpers that will simplify checking if a backing file is valid or
whether it has backing store. The helper virStorageSourceIsBacking
returns true if the given virStorageSource is a valid backing store
member. virStorageSourceHasBacking returns true if the virStorageSource
has a backing store child.
Adding these functions creates a central points for further refactors.
Storage driver uses virStorageSource only partially to store it's
configuration but fully when parsing backing files of storage volumes.
This patch sets the 'type' field to a value other than
VIR_STORAGE_TYPE_NONE so that further patches can add a terminator
element to backing chains without breaking iteration.
The backing store indexes were not bound to the storage sources in any
way. To allow us to bind a given alias to a given storage source we need
to save the index in virStorageSource. The backing store ids are now
generated when detecting the backing chain.
Since we don't re-detect the backing chain after snapshots, the
numbering needs to be fixed there.
This internal API can be used to find a specific CPU model in
virDomainCapsCPUModels list.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When a hypervisor marks a CPU model as unusable on the current host, it
may also give us a list of features which prevent the model from being
usable. Storing this list in virDomainCapsCPUModel will help the CPU
driver with creating a host-model CPU configuration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently, if parsing of device info fails info->alias is freed.
It doesn't make much sense to leave the rest of the struct
behind.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's one 'return' in the middle of the function body. It's
very easy to miss and so it makes adding new code harder. Also
the function doesn't follow our style 100%.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Every caller reports the error themselves. Might as well move it
into the function and thus unify it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let's use the RWObjectLockable for the various list lock mgmt.
Only time need Write lock will be for Add/Remove logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rename virDomainNumaDefCPUFormat to virDomainNumaDefCPUFormatXML,
matching its peer virDomainNumaDefCPUParseXML and the general
vir*{Format,Parse}XML conventions.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Modify virStoragePoolObjGetAutostartLink and
virStoragePoolObjGetConfigFile to return "const char *"
since that's how both are used and to ensure no one
tries to VIR_FREE the result.
https://bugzilla.redhat.com/show_bug.cgi?id=1497410
The comment in virNetDevTapInterfaceStats() implementation for
Linux states that packets transmitted by domain are received by
the host and vice versa. Well, this is true but not for all types
of interfaces. For instance, for macvtaps when TAP device is
hooked right onto a physical device any packet that domain sends
looks also like a packet sent to the host. Therefore, we should
allow caller to chose if the stats returned should be straight
copy or swapped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Small wrapper to lookup interface in domain definition by its
name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When detaching an <interface/> from a domain, the MAC address is
parsed and if not present one is generated. If no corresponding
interface is found in the domain, the following error is
reported:
error: operation failed: no device matching mac address 52:54:00:75:32:5b found
where the MAC address is the auto generated one. This might be
very confusing. Solution to this is to ignore auto generated MAC
address when looking up the device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
virDomainDiskSourceParse got to the point of being an ugly spaghetti
mess by adding more and more stuff into it. Split out parsing of network
disk information into a separate function so that it stays contained.
On pure success paths, virNWFilterIPAddrMapAddIPAddr was validly
consuming the input @addr; however, on failure paths it was possible
that virNWFilterVarValueCreateSimple succeed, but virNWFilterHashTablePut
failed resulting in virNWFilterVarValueFree being called to clean
up @val which also cleaned up the input @addr. Thus the caller had
no way to determine on failure whether it too should clean up the
passed parameter.
Instead, let's create a copy of the input @addr, then handle that
properly in the API allowing/forcing the caller to free it's own
copy of the input parameter.
Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.
Sample XML for a VxHS disk:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.
Update the qemuxml2xmltest in order to add a test to show the proper
parsing.
Also update the docs to describe the tls attribute.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virNWFilterIPAddrMapAddIPAddr code can consume the @addr parameter
on success when the @ifname is found in the ipAddressMap->hashTable
hash table in the call to virNWFilterVarValueAddValue; however, if
not found in the hash table, then @addr is formatted into a @val
which is stored in the table and on return the caller would be
expected to free @addr.
Thus, the caller has no way to determine on success whether @addr was
consumed, so in order to fix this create a @tmp variable which will
be stored/consumed when virNWFilterVarValueAddValue succeeds. That way
the caller can free @addr whether the function returns success or failure.
This reverts commit edaf4ebe95.
This uses "reconnect" as attribute for <source> element, but we already
have a <reconnect> element for <source> element for chardev devices.
Since this is the same feature for different device it should be
presented in XML the same way.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It is possible (although possibly not very useful) to leave out
the service attribute when using <source mode='bind'/>
Fix the formatter bug introduced by commit 4a0da34 and format
the host when its present (checked for non-NULL inside
virBufferEscapeString) instead of basing it on the presence
of the service attribute.
https://bugzilla.redhat.com/show_bug.cgi?id=1455825
In the past we updated host-model CPUs with host CPU data by adding a
model and features, but keeping the host-model mode. And since the CPU
model is not normally formatted for host-model CPU defs, we had to pass
the updateCPU flag to the formatting code to be able to properly output
updated host-model CPUs. Libvirt doesn't do this anymore, host-model
CPUs are turned into custom mode CPUs once updated with host CPU data
and thus there's no reason for keeping the hacks inside CPU XML
formatters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashed or restart, QEMU shoule be reconnect to OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce virStoragePoolObjForEachVolume to scan each volume
calling the passed callback function until all volumes have been
processed in the storage pool volume list, unless the callback
function returns an error.
Introduce virStoragePoolObjSearchVolume to search each volume
calling the passed callback function until it returns true
indicating that the desired volume was found.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create/use virStoragePoolObjAddVol in order to add volumes onto list.
Create/use virStoragePoolObjRemoveVol in order to remove volumes from list.
Create/use virStoragePoolObjGetVolumesCount to get count of volumes on list.
For the storage driver, the logic alters when the volumes.obj list grows
to after we've fetched the volobj. This is an optimization of sorts, but
also doesn't "needlessly" grow the volumes.objs list and then just decr
the count if the virGetStorageVol fails.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create/use a helper to perform object allocation.
Adjust storagevolxml2argvtest.c in order to use the allocator and
setting of the obj->def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for making a private object, create accessor API's for
consumer storage functions to use:
virStoragePoolObjGetDef
virStoragePoolObjSetDef
virStoragePoolObjGetNewDef
virStoragePoolObjDefUseNewDef
virStoragePoolObjGetConfigFile
virStoragePoolObjSetConfigFile
virStoragePoolObjGetAutostartLink
virStoragePoolObjIsActive
virStoragePoolObjSetActive
virStoragePoolObjIsAutostart
virStoragePoolObjSetAutostart
virStoragePoolObjGetAsyncjobs
virStoragePoolObjIncrAsyncjobs
virStoragePoolObjDecrAsyncjobs
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id 'e02ff020cac' neglected to use the attrBuf and childBuf
in the virDomainDiskSourceFormatNetwork call.
So make the necessary alterations to allow usage.
Rather than checking during XML processing, move the check for
valid <encryption> into virDomainDiskDefParseValidate and alter
the text of the message slightly to be a bit more correct.
Rather than checking during XML processing, move the checks for correct
and valid auth into virDomainDiskDefParseValidate. This will introduce
virDomainDiskSourceDefParseAuthValidate to validate that the authdef
stored for the virStorageSource is valid. This can then be expanded
to service backingStore sources as well.
Alter the message text slightly as well to distinguish between an
unknown name and an incorrectly used name. Since type is not a
mandatory field, add the NULLSTR() around the output of the unknown
error. NB, a config using unknown formatting would fail virschematest
since it only accepts 'iscsi' and 'ceph' as "valid" types.
https://bugzilla.redhat.com/show_bug.cgi?id=1477880
If the "/#" is missing from the provided iSCSI path, then we need
to provide the default LUN of /0; otherwise, QEMU will fail to parse
the URL causing a failure to either create the guest or hotplug
attach the storage.
During post parse, for any iSCSI disk or hostdev, scan the source
path looking for the presence of '/', if found, then we can assume
the LUN is provided. If not found, alter the input XML to add the
"/0". This will cause the generated XML to have the generated
value when the domain config is saved after post parse.
This option requires:
<ioapic driver='qemu'/>
Report an error in case someone tries to combine
it with different ioapic setting.
Setting 'eim' on without enabling 'intremap' does not make sense.
https://bugzilla.redhat.com/show_bug.cgi?id=1457610
https://bugzilla.redhat.com/show_bug.cgi?id=1439991
Whenever a device is being updated via
virDomainUpdateDeviceFlags() API, we parse the device XML and
ideally run some generic checks to validate the configuration
(e.g. if device defines per-device boot order but the domain has
os/boot element already). Well, that's the theory - due to a
missing check we've jumped early from that check function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This allows drivers to set their own default. But if a driver neglects
to fill one in, we still error like we previously would at parse time.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Will be needed for future patches to pull the default video type
setting out of XML parsing routines.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We always truncated the name at 20 bytes instead of characters. In
case 20 bytes were in the middle of a multi-byte character, then the
string became invalid and various parts of the code would error
out (e.g. XML parsing of that string). Let's instead properly
truncate it after 20 characters instead.
We cannot test this in our test suite because we would need to know
what locales are installed on the system where the tests are ran and
if there is supported one (most probably there will be, but we cannot
be 100% sure), we could initialize gettext in qemuxml2argvtest, but
there would still be a chance of getting two different (both valid,
though) results.
In order to test this it is enough to start a machine with a name for
which trimming it after 20 bytes would create invalid sequence (e.g.
1234567890123456789č where č is any multi-byte character). Then start
the domain and restart libvirtd. The domain would disappear because
such illegal sequence will not go through the XML parser. And that's
not a bug of the parser, it should not be in the XML in the first
place, but since we don't use any sophisticated formatter, just
mash some strings together, the formatting succeeds.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1448766
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This reverts commit 92840eb3a7.
More recent reviews/changes don't have the vir*ObjNew APIs
consuming the @def, so remove from Interface as well. Changes
needed to also deal with conflicts from commit id '46f5eca4'.
Signed-off-by: John Ferlan <jferlan@redhat.com>
While formatting disk or chardev element they both uses
virDomainDiskSourceDefFormatSeclabel() function which also closes
the source element. This is not extendable.
Use the new virXMLFormatElement() to properly format the source
element with possible child elements.
As a side effect it fixes a bug in disk source formatting.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
To handle setting a default heads value. Convert callers that were
doing it by hand
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For selected hostdev types, we validate that the address type
matches the subsystem type when parsing the XML.
Move it to the validation phase, to allow extending the checks
to other subsystem types without making existing domains disappear.
When parsing bootable devices, we maintain a bitmap of used
<boot order=""> elements. Use it in the post-parse function
to figure out whether the user tried to mix per-device and
per-domain boot elements.
This removes the need to count them twice.
These functions contain the post-parse steps common for all drivers.
Rename it to use the 'Common' prefix, instead of the vagueness
of 'Internal', leaving 'Internal' available for other vague uses.
Since the source element is parsed only once for these type of
character devices we don't have to use temporary variable and
check whether the variable was already set.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The extra check whether (connect|bind)(Host|Service) was set is
required because for UDP chardev there can be two source elements.
Without the check there could be a memory leak.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In order to ensure that the default protocol is RAW, explicitly
assigning VIR_DOMAIN_CHR_TCP_PROTOCOL_RAW = 0.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently we accept and correctly parse this chardev XML:
...
<channel type='tcp'>
<source mode='connect'/>
<source mode='bind' host='localhost'/>
<source service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
The parsed formatted XML is:
...
<channel type='tcp'>
<source mode='connect' host='localhost' service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
That behavior is super wrong and should not be allowed. If you notice
the current parse takes the first found attribute and uses that value,
so for example from the "<source mode='bind' host='localhost'/>" only
the "host" attribute is used. It works the same way for all possible
attributes that we are able to parse for source element.
This patch enforces providing only one source element for all character
devices, only for UDP type we allow to provide two source elements
since you can specify both modes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since its introduction in commit 874e65aa, if someone requests:
<os><bios useserial="yes"/><os/>
we report an error if we cannot successfully count the number
of serial devices via an XPath query.
Instead of fixing the check (and moving it to the validation phase,
to prevent existing domains from disappearing), drop it completely.
For QEMU, the number of serials is checked when building the command
line.
I mistakenly thought pSeries guests supported 32 PHBs,
but it turns out they only support 31. Validate the
target index accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1479647
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Validation should happen after parsing, so the proper
location for it is virDomainControllerDefValidate()
rather than virDomainControllerDefParseXML().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Some failures of the post parse callback can be tolerated. This is
specifically desired when loading the configs of existing VMs. In such
case the post parse callback should not really be modifying anything
in the definition.
This patch adds a parse flag VIR_DOMAIN_DEF_PARSE_ALLOW_POST_PARSE_FAIL
which will allow the callbacks to report non-fatal failures by returning
a positive return value. In such case the field 'postParseFailed' in the
domain definition is set to true, to notify the drivers that the
callback failed and possibly needs to be re-run.
Post parse callbacks will need to be able to signal that they failed
non-fatally. This means that we need to return the value returned by the
callback without modification.
Some drivers use def-specific private data across callbacks (e.g.
qemuCaps in the qemu driver). Currently it's mostly allocated in every
single callback. This is rather wasteful, given that every single call
to the device callback allocates it.
The new callback will allocate the data (if not provided externally) and
then use it for the VM, address and device post parse callbacks.
Add yet another post parse callback, which is executed prior the real
one without @parseOpaque. This is meant to set basics before
@parseOpaque (in case of the qemu driver qemuCaps) can be allocated.
This callback will allow to optimize passing of custom parseOpaque
through the callbacks.
Back in the day when I was implementing QoS for networks there
were no self inflating virBitmaps. Only the static ones.
Therefore, I had to allocate the whole 8KB of memory in order to
keep track of used/unused class IDs. This is rather wasteful
because nobody is ever gonna use that much classes (kernel
overhead would drastically lower the bandwidth). Anyway, now that
we have self inflating bitmaps we can start small and allocate
more if there's need for it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rename the variable, recent review requested just use of @filter,
so be consistent throughout.
NB: Also change the virNWFilterPtr to be @nwfilter to not conflict
with the renamed variable.
Use the structure names in the @data setup - makes it easier than
going back to find the struct fields to make sure the order of the
data is correct.
Signed-off-by: John Ferlan <jferlan@redhat.com>
To be consistent with the API definition, use the @maxnames instead
of @nnames when describing/comparing against the maximum names to
be provided for the *ConnectList[Defined]Networks APIs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the virObjectRef in virNetworkObjAssignDefLocked to after
the virHashAddEntry to make it "clearer" why the @ref is being
incremented. Upon return from the ObjNew we will have 1 ref on
the object already, adding it to the hash table requires the
increment.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation to privatize the virNetworkObj - create an accessor function
to get the current @persistent value. Also change the value to a bool rather
than an unsigned int (since that's how it's generated anyway).
Signed-off-by: John Ferlan <jferlan@redhat.com>
In order to privatize the virNetworkObj create accessors in virnetworkobj
in order to handle the get/set of the active value.
Also rather than an unsigned int, convert it to a boolean to match other
drivers representation and the reality of what it is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for making the object private, create a couple of API's
to get the obj->def & obj->newDef and set the obj->def.
While altering networkxml2conftest.c to use the virNetworkObjSetDef
API, fix the name of the variable from @dev to @def
Signed-off-by: John Ferlan <jferlan@redhat.com>
Change the variable name to be a bit more descriptive and less confusing
when used with the data.network.actual->class_id.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for making the object private, create/use a couple of API's
to get/set the obj->dnsmasqPid and obj->radvdPid.
NB: Since the pid's can sometimes changed based on intervening functions,
be sure to always fetch the latest value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since we can only ever have one reference to obj->macmap, rather
than only clearing obj->macmap during virNetworkObjUnrefMacMap
(e.g. virtual network from networkShutdownNetwork), let's just
unconditionally clear the obj->macmap to ensure that some future
change that created it's own reference to obj->macmap wouldn't
have that reference disappear if virNetworkObjDispose got called.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for having a private virNetworkObj - let's create/move some
API's that handle the obj->macmap. The API's will be renamed to have a
virNetworkObj prefix to follow conventions and the arguments slightly
modified to accept what's necessary to complete their task.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than overload virObjectUnlock as commit id '77f4593b' has
done, create a separate virObjectRWUnlock API that will force the
consumers to make the proper decision regarding unlocking the
RWLock's. Similar to the RWLockRead and RWLockWrite, use the
virObjectGetRWLockableObj helper. This restores the virObjectUnlock
code to using the virObjectGetLockableObj.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Instead of making virObjectLock be the entry point for two
different types of locks, let's create a virObjectRWLockWrite API
which will only handle the virObjectRWLockableClass objects.
Use the new virObjectRWLockWrite for the virdomainobjlist code
in order to handle the Add, Remove, Rename, and Load operations
that need to be very synchronous.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since the class it represents is based on virObjectRWLockableClass
and in order to make sure we differentiate just in case anyone somehow
believes they could use virObjectLockRead for a virObjectLockableClass,
let's rename the API to use the RW in the name. Besides the RW locks
refer to pthread_rwlock_{init|rdlock|wrlock|unlock|destroy} while the
other locks refer to pthread_mutex_{init|lock|unlock|destroy}.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This way later patches can add another structures with virResctrl
prefix without the meaning being even more confusing than it needs to
be.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That means that returning negative values means error and non-negative
values differ in meaning, but are all successful.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
It doesn't access anything from conf/ and ti will be needed to use
from other util/ places. This split makes the separation clearer.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In virDomainNetDefParseXML() the def->coalesce is parsed and
allocated by virDomainNetDefCoalesceParseXML() but in fact it's
never freed .
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When parsing boot options from domain XML in
virDomainDefParseBootOptions() initenv id stored to:
def->os.initenv[i]->name
def->os.initenv[i]->value
But these are never freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
My commit 0c1d863 broke formatting of passthrough smartcard devices:
<smartcard mode='passthrough' type='spicevmc'/>
resulted in invalid XML:
<smartcard mode='passthrough'>
type='spicevmc'>
<address type='ccid' controller='0' slot='0'/>
</smartcard>
Split out chardev source formatting function into two -
one formatting the attributes and other formatting the subelements.
Reported-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
After an OOM error, virBuffer* APIs set buf->use to zero.
Adding a buffer to the parent buffer only if use is non-zero
would quietly drop data on error.
Check the error beforehand to make sure buf->use is zero
because we have not attempted to add anything to it.
Convert virDomainSmartcardDefFormat to use a separate buffer
for possible subelements, to avoid the need for duplicated
formatting logic in virDomainDeviceInfoNeedsFormat.
This function has grown to format more than just the address.
Delete the comment completely to avoid failing to update it
in the future.
Also, the indentation is now handled by the virBuffer APIs,
so the comment about indentation no longer makes sense.
This function returns false if virDomainDeviceInfoFormat
would not format anything.
Using it as the sole condition to decide whether to call
virDomainDeviceInfoFormat or not is pointless, since
the conditions are repeated in virDomainDeviceInfoFormat.
These functions were made exportable back in 3aa3e072 when I was
splitting network code into parsing and list management parts.
Since then the split is finished now and these two functions do
not need to be exported anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is more related to a domain as we might use it even when there is
no systemd and it does not use any dbus/systemd functions. In order
not to use code from conf/ in util/ pass machineName in cgroups code
as a parameter. That also fixes a leak of machineName in the lxc
driver and cleans up and de-duplicates some code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the virSecretLoadValue fails, the code jumped to cleanup without
setting @ret = obj, thus calling virSecretObjListRemove which only
accounts for the object reference related to adding the object to
the list during virSecretObjListAdd, but does not account for the
reference to the object itself as the return of @ret would be NULL
so the caller wouldn't call virSecretObjEndAPI on the object recently
added thus reducing the refcnt to zero.
This patch will perform the ObjListRemove in the failure path of
virSecretLoadValue and Unref @obj in order to perform clean up
and return @obj as NULL. The @def will be freed as part of the
virObjectUnref.
Rather than assign to a local variable, let's just assign directly to the
object using the error path for cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The original name didn't hint at the fact that PHBs are
a pSeries-specific concept.
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Recent commits made it so that pci-root controllers for
pSeries guests are automatically assigned the
spapr-pci-host-bridge model name; however, that prevents
guests to migrate to older versions of libvirt which don't
know about that model name at all, which at the moment is
all of them :)
To avoid the issue, just strip the model name from PHBs
when formatting the migratable XML; guests that use more
than one PHB are not going to be migratable anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1472277
Commit id '106930aaa' altered the order of checking for an existing
vHBA (e.g something created via nodedev-create functionality outside
of the storage pool logic) which inadvertantly broke the code to
decide whether to alter/force the fchost->managed field to be 'yes'
because the storage pool will be managing the created vHBA in order
to ensure when the storage pool is destroyed that the vHBA is also
destroyed.
This patch moves the check (and checkParent helper) for an existing
vHBA back into the createVport in storage_backend_scsi. It also
adjusts the checkParent logic to more closely follow the intentions
prior to commit id '79ab0935'. The changes made by commit id '08c0ea16f'
are only necessary to run the virStoragePoolFCRefreshThread when
a vHBA was really created because there's a timing lag such that
the refreshPool call made after a startPool from storagePoolCreate*
wouldn't necessarily find LUNs, but the thread would. For an already
existing vHBA, using the thread is unnecessary since the vHBA already
exists and the lag to configure the LUNs wouldn't exist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than use a forward linked list of elements, it'll be much more
efficient to use a hash table to reference the elements by unique name
and to perform hash searches.
This patch does all the heavy lifting of converting the list object to
use a self locking list that contains the hash table. Each of the FindBy
functions that do not involve finding the object by it's key (name) is
converted to use virHashSearch in order to find the specific object.
When searching for the key (name), it's possible to use virHashLookup.
For any of the list perusal functions that are required to evaluate
each object, the virHashForEach function is used.
There is no reason why two threads trying to look up two domains
should mutually exclude each other. Utilize new
virObjectRWLockable that was just introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Currently, @port is type of string. Well, that's overkill and
waste of memory. Port is always an integer. Use it as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Split out parsing of one host into a separate function and add a new
function to loop through all the host XML nodes.
This change removes multiple levels of nesting due to the old XML
parsing approach used.
Alter the virStoragePoolObjNumOfVolumes, virStoragePoolObjVolumeGetNames,
and virStoragePoolObjVolumeListExport APIs to take a virStoragePoolObjPtr
instead of the &obj->volumes and obj->def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virDomainDeviceInfo struct is defined in device_conf,
so generic functions that operate on it should also be
defined there rather than in domain_conf.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While searching for an element using a function it may be
desirable to know the element key for future operation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
These rules will make it possible for libvirt to
automatically assign PCI addresses in a way that
respects any isolation constraints devices might
have.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Isolation groups will eventually allow us to make sure certain
devices, eg. PCI hostdevs, are assigned to guest PCI buses in
a way that guarantees improved isolation, error detection and
recovery for machine types and hypervisors that support it,
eg. pSeries guest on QEMU.
This patch merely defines storage for the new information
we're going to need later on and makes sure it is passed from
the hypervisor driver (QEMU / bhyve) down to the generic PCI
address allocation code.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Now that we have a bit more control, let's convert our object into
a lockable object and let that magic handle the create and lock/unlock.
This also involves creating a virNodeDeviceEndAPI in order to handle
the object cleanup for API's that use the Add or Find API's in order
to get a locked/reffed object. The EndAPI will unlock and unref the
object returning NULL to indicate to the caller to not use the obj.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the structures to withing virnodedeviceobj.c
Move the typedefs from node_device_conf to virnodedeviceobj.h
Signed-off-by: John Ferlan <jferlan@redhat.com>
In an overall effort to privatize access to virNodeDeviceObj and
virNodeDeviceObjList into the virnodedeviceobj module, move the
object list parsing from node_device_driver and replace with a
call to a virnodedeviceobj helper. This follows other similar
APIs/helpers which peruse the object list looking for some specific
data in order to get/return an @device (virNodeDevice) object to
the caller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We're about to move the call to nodeDeviceSysfsGetSCSIHostCaps from
node_device_driver into virnodedeviceobj, so move the guts of the code
from the driver specific node_device_linux_sysfs into its own API
since virnodedeviceobj cannot callback into the driver.
Nothing in the code deals with sysfs anyway, as that's hidden by the
various virSCSIHost* and virVHBA* utility function calls.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create local @obj and @def for the API's rather than referencing the
devs->objs[i][->def->]. It'll make future patches easier to read.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Ensure that any function that walks the node device object list is prefixed
by virNodeDeviceObjList.
Also, modify the @filter param name for virNodeDeviceObjListExport to
be @aclfilter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation to make things private, make the ->devs be pointers to a
virNodeDeviceObjList and then manage everything inside virnodedeviceobj
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create an allocator for the virNodeDeviceObjPtr - include setting up
the mutex, saving the virNodeDeviceDefPtr, and locking the return object.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than passing the object to be removed by reference, pass by value
and then let the caller decide whether or not the object should be free'd
and how to handle the logic afterwards. This includes free'ing the object
and/or setting the local variable to NULL to prevent subsequent unexpected
usage (via something like virNodeDeviceObjRemove in testNodeDeviceDestroy).
For now this function will just handle the remove of the object from the
list for which it was placed during virNodeDeviceObjAssignDef.
This essentially reverts logic from commit id '61148074' that free'd the
device entry on list, set *dev = NULL and returned. Thus fixing a bug in
node_device_hal.c/dev_refresh() which would never call dev_create(udi)
since @dev would have been set to NULL.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit b3e71a8830.
As it turns out this ends up very badly as the @def could be Free'd
even though it's owned by @obj as a result of the AssignDef.
When looking for slots suitable for a PCI device, libvirt
might need to add an extra PCI controller: for pSeries guests,
we want that extra controller to be a PHB (pci-root) rather
than a PCI bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
pSeries guests will soon need the new information; luckily,
we can figure it out automatically most of the time, so
users won't have to worry about it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Adding it to the virDomainControllerPCIModelName enumeration
is enough for existing code to handle it, so parsing and
formatting will work without further tweaking.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
pSeries guests will soon be allowed to have multiple
PHBs (pci-root controllers), which of course means that
all but one of them will have a non-zero index; hence,
we'll need to relax the current check.
However, right now the check is performed in the conf
module, which is generic rather than tied to the QEMU
driver, and where we don't have information such as the
guest machine type available.
To make this change of behavior possible down the line,
we need to move the check from the XML parser to the
drivers. Luckily, only QEMU and bhyve are using PCI
controllers, so this doesn't result in much duplication.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
The current algorithm for slot allocation tries to be clever
and avoid looking at buses / slots more than once unless it's
necessary. Unfortunately that makes the code more complex,
and it will cause problem later on in some situations unless
even more complex code is added.
Since the performance gains are going to be pretty modest
anyway, we can just get rid of the extra complexity and use a
completely straighforward implementation instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Move @function after @flags to match other functions in the
same module like virDomainPCIAddressReserveNextAddr().
Also move virDomainPCIAddressReserveNextAddr() closer to
virDomainPCIAddressReserveAddr() in the header file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
This function was private to the QEMU driver and was,
accordingly, called qemuDomainPCIBusFullyReserved().
However the function is really not QEMU-specific at
all, so it makes sense to move it closer to the
virDomainPCIAddressBus struct it operates on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
The virDomainDeviceInfoIsSet() function no longer exists.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Fill them in right away rather than having to figure out at runtime
whether they are necessary or not.
virStorageSourceNetworkDefaultPort does not need to be exported any
more.
Since we're storing a virUUIDFormat'd string in our Hash Table, let's
modify the Lookup API to receive a formatted string as well.
Signed-off-by: John Ferlan <jferlan@redhat.com>
It comes very handy to have source path for chardevs. We already
have such function: virDomainAuditChardevPath() but it's static
and has name not suitable for exposing. Moreover, while exposing
it change its name slightly to virDomainChrSourceDefGetPath.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Users may want to run the init command of a container as a special
user / group. This is achieved by adding <inituser> and <initgroup>
elements. Note that the user can either provide a name or an ID to
specify the user / group to be used.
This commit also fixes a side effect of being able to run the command
as a non-root user: the user needs rights on the tty to allow shell
job control.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Some containers may want the application to run in a special directory.
Add <initdir> element in the domain configuration to handle this case
and use it in the lxc driver.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
When running an application container, setting environment variables
could be important.
The newly introduced <initenv> tag in domain configuration will allow
setting environment variables to the init program.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Add support for vgaconf driver configuration. In domain xml it looks like
this:
<video>
<driver vgaconf='io|on|off'>
<model .../>
</video>
It was added with bhyve gop video in mind to allow users control how the
video device is exposed to the guest, specifically, how VGA I/O is
handled.
One can refer to the bhyve manual page to get more detailed description
of the possible VGA configuration options:
https://www.freebsd.org/cgi/man.cgi?query=bhyve&manpath=FreeBSD+12-current
The relevant part could be found using the 'vgaconf' keyword.
Also, add some tests for this new feature.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 54fa1b44af added virDomainDeviceInfo::loadparm
and updated virDomainDeviceInfoClear() accordingly, but
omitted the necessary virDomainDeviceInfoCopy() changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
If a remote call fails during event registration (more than likely from
a network failure or remote libvirtd restart timed just right), then when
calling the virObjectEventStateDeregisterID we don't want to call the
registered @freecb function because that breaks our contract that we
would only call it after succesfully returning. If the @freecb routine
were called, it could result in a double free from properly coded
applications that free their opaque data on failure to register, as seen
in the following details:
Program terminated with signal 6, Aborted.
#0 0x00007fc45cba15d7 in raise
#1 0x00007fc45cba2cc8 in abort
#2 0x00007fc45cbe12f7 in __libc_message
#3 0x00007fc45cbe86d3 in _int_free
#4 0x00007fc45d8d292c in PyDict_Fini
#5 0x00007fc45d94f46a in Py_Finalize
#6 0x00007fc45d960735 in Py_Main
#7 0x00007fc45cb8daf5 in __libc_start_main
#8 0x0000000000400721 in _start
The double dereference of 'pyobj_cbData' is triggered in the following way:
(1) libvirt_virConnectDomainEventRegisterAny is invoked.
(2) the event is successfully added to the event callback list
(virDomainEventStateRegisterClient in
remoteConnectDomainEventRegisterAny returns 1 which means ok).
(3) when function remoteConnectDomainEventRegisterAny is hit,
network connection disconnected coincidently (or libvirtd is
restarted) in the context of function 'call' then the connection
is lost and the function 'call' failed, the branch
virObjectEventStateDeregisterID is therefore taken.
(4) 'pyobj_conn' is dereferenced the 1st time in
libvirt_virConnectDomainEventFreeFunc.
(5) 'pyobj_cbData' (refered to pyobj_conn) is dereferenced the
2nd time in libvirt_virConnectDomainEventRegisterAny.
(6) the double free error is triggered.
Resolve this by adding a @doFreeCb boolean in order to avoid calling the
freeCb in virObjectEventStateDeregisterID for any remote call failure in
a remoteConnect*EventRegister* API. For remoteConnect*EventDeregister* calls,
the passed value would be true indicating they should run the freecb if it
exists; whereas, it's false for the remote call failure path.
Patch based on the investigation and initial patch posted by
fangying <fangying1@huawei.com>.
Similarly to commit 5da28cc306 this check
actually does not make sense since duplicate WWNs are used e.g. when
multipathing disks.
This reverts commit 780fe4e4ba.
Update the per device boot schema to add an optional loadparm parameter.
eg: <boot order='1' loadparm='2'/>
Extend the virDomainDeviceInfo to support loadparm option.
Modify the appropriate functions to parse loadparm from boot device xml.
Add the xml2xml test to validate the field.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
On some platforms the number of bits in the cbm_mask might not be
divisible by 4 (and not even by 2), so we need to properly count the
bits. Similar file, min_cbm_bits, is properly parsed and used, but if
the number is greater than one, we lose the information about
granularity when reporting the data in capabilities. For that matter
always report granularity, but if it is not the same as the minimum,
add that information in there as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
In 9cb891141c we've introduced some logic to clearing suggested
macvtap/macvlan ifnames. The logic consists of comparing ifname
string with strings that libvirt would generate. However, due to
a typo only VIR_NET_GENERATED_MACVTAP_PREFIX was compared. Twice.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virDomainXMLOption gains driver specific callbacks for parsing and
formatting save cookies.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The code will be used by snapshots and domain save/restore code to store
additional data for a saved running domain. It is analogous to migration
cookies, but simple and one way only.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This will be used later when a save cookie will become part of the
snapshot XML using new driver specific parser/formatter functions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function will be used in paths where mismatching CPU defs are not an
error.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we have a bit more control, let's convert our object into
a lockable object and let that magic handle the create and lock/unlock.
This commit also introduces virInterfaceObjEndAPI in order to handle the
lock unlock and object unref in one call for consumers returning a NULL
obj upon return. This removes the need for virInterfaceObj{Lock|Unlock}
external API's.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the consumption of @def in virInterfaceObjNew and then handle that
in the error path of virInterfaceObjListAssignDef since it's caller expects
to need to free @def when NULL is returned and so would virInterfaceObjFree.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Make the decision based on the usage of childBuf buffer.
This fixes the oddity in the test case introduced by commit c1c4d0d
where we would format an empty pair tag.
We need to decide whether to format <controller> as a single tag
or if it has any subelements.
Rewrite the function to use a separate buffer for subelements,
to make adding new options easier.
After some discussion on and off the linux-audit mailing list, we
should use different fields for the audit messages.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1218603
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It was only ever used in node_device_hal.c which really never used it
anyway since the NODE_DEV_UDI was never referenced. Remove free_udi()
and @privData as well as the references to obj->privateData & obj->privateFree.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for privatizing the virNodeDeviceObj - create an accessor
for the @def field and then use it for various callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In order to ensure that whenever something is added to virNodeDevCapType
that both functions are considered for processing of a new capability,
change the if-then-else construct into a switch statement.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When searching for an NPIV capable fc_host, not only does there need to
be an "fc_host" capability with the specified wwnn/wwpn or fabric_wwn,
but that scsi_host must be vport capable; otherwise, one could end up
picking an exising vHBA/NPIV which wouldn't be good.
Currently not a problem since scsi_hosts are in an as found forward linked
list and the vport capable scsi_hosts will always appear before a vHBA by
definition. However, in the near term future a hash table will be used to
lookup the devices and that could cause problems for these algorithms.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Alter the algorithm to return a list of matching names rather than a
list of match virInterfaceObjPtr which are then just dereferenced
extracting the def->name and def->mac. Since the def->mac would be
the same as the passed @mac, just return a list of names and as long
as there's only one, extract the [0] entry from the passed list.
Also alter the error message on failure to include the mac that wasn't
found.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the structs into virinterfaceobj.c, create necessary accessors, and
initializers.
This also includes reworking virInterfaceObjListClone to handle receiving
a source interfaces list pointer, creating the destination interfaces object,
and copying everything from source into dest.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We're about to make the obj much more private, so make it easier to
see future changes which will require accessors for the obj->def
This also includes modifying some interfaces->objs[i]->X references to be
obj = interfaces->objs[i]; and then def = obj->def
Signed-off-by: John Ferlan <jferlan@redhat.com>
The @cpus is allocated by virFileReadValueBitmap() but never
freed:
==21274== 40 (32 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 808 of 1,004
==21274== at 0x4C2E080: calloc (vg_replace_malloc.c:711)
==21274== by 0x54BA561: virAlloc (viralloc.c:144)
==21274== by 0x54BC604: virBitmapNewEmpty (virbitmap.c:126)
==21274== by 0x54BD059: virBitmapParseUnlimited (virbitmap.c:570)
==21274== by 0x54EECE9: virFileReadValueBitmap (virfile.c:4113)
==21274== by 0x5563132: virCapabilitiesInitCaches (capabilities.c:1548)
==21274== by 0x2BB86E59: virQEMUCapsInit (qemu_capabilities.c:1132)
==21274== by 0x2BBEC067: virQEMUDriverCreateCapabilities (qemu_conf.c:928)
==21274== by 0x2BC3DEAA: qemuStateInitialize (qemu_driver.c:845)
==21274== by 0x5625AAC: virStateInitialize (libvirt.c:770)
==21274== by 0x124519: daemonRunStateInit (libvirtd.c:881)
==21274== by 0x554C927: virThreadHelper (virthread.c:206)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Similar to scsi_host and fc_host, there is a relation between a
scsi_target and its transport specific fc_remote_port. Let's expose this
relation and relevant information behind it.
An example for a virsh nodedev-dumpxml:
virsh # nodedev-dumpxml scsi_target0_0_0
<device>
<name>scsi_target0_0_0</name>
<path>/sys/devices/[...]/host0/rport-0:0-0/target0:0:0</path>
<parent>scsi_host0</parent>
<capability type='scsi_target'>
<target>target0:0:0</target>
<capability type='fc_remote_port'>
<rport>rport-0:0-0</rport>
<wwpn>0x9d73bc45f0e21a86</wwpn>
</capability>
</capability>
</device>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Now that the node_device driver is aware of CCW devices, let's hook up
virsh so that we can filter them properly.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Make CCW devices available to the node_device driver. The devices are
already seen by udev so let's implement necessary code for detecting
them properly.
Topologically, CCW devices are similar to PCI devices, e.g.:
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1420740
Testing found an inventive way to cause an error at shutdown by providing the
parent name for the fc host creation using the "same name" as the HBA. Since
the code thus assumed the parent host name provided was the parent HBA and
just extracted out the host number and sent that along to the vport_destroy
this avoided checks made for equality.
So just add the equality check to that path to resolve.
If the first console is just a copy of the first serial device we
don't need to iterate over the same device twice in order to perform
actions like security labeling, cgroup configuring, etc.
Currently only security SELinux manager was aware of this fact.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
To every virDirOpen we must have VIR_DIR_CLOSE otherwise FD is
leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Start discovering the mediated devices on the host system and format the
attributes for the mediated device into the XML. Compared to the parent
device which reports generic information about the abstract mediated
devices types, a child device only reports the type name it has been
instantiated from and the IOMMU group number, since that's device
specific compared to the rest of the info that can be gathered about
mediated devices at the moment.
This patch introduces both the formatting and parsing routines, updates
nodedev.rng schema, adding a testcase as well.
The resulting mdev child device XML:
<device>
<name>mdev_4b20d080_1b54_4048_85b3_a6a62d165c01</name>
<path>/sys/devices/.../4b20d080-1b54-4048-85b3-a6a62d165c01</path>
<parent>pci_0000_06_00_0</parent>
<driver>
<name>vfio_mdev</name>
</driver>
<capability type='mdev'>
<type id='vendor_supplied_type_id'/>
<iommuGroup number='NUM'/>
<capability/>
<device/>
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The parent device needs to report the generic stuff about the supported
mediated devices types, like device API, available instances, type name,
etc. Therefore this patch introduces a new nested capability element of
type 'mdev_types' with the resulting XML of the following format:
<device>
...
<capability type='pci'>
...
<capability type='mdev_types'>
<type id='vendor_supplied_id'>
<name>optional_vendor_supplied_codename</name>
<deviceAPI>vfio-pci</deviceAPI>
<availableInstances>NUM</availableInstances>
</type>
...
<type>
...
</type>
</capability>
</capability>
...
</device>
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The reason for introducing two capabilities, one for the device itself
(cap 'mdev') and one for the parent device listing the available types
('mdev_types'), is that we should be able to do
'virsh nodedev-list --cap' not only for existing mdev devices but also
for devices that support creation of mdev devices, since one day libvirt
might be actually able to create the mdev devices in an automated way
(just like we do for NPIV/vHBA).
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since there's at least SRIOV and MDEV sub-capabilities to be parsed,
let's make the code more readable by splitting it to several logical
blocks.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add a new <ioapic> element with a driver attribute.
Possible values are qemu and kvm. With 'qemu', the I/O
APIC can be put in the userspace even for KVM domains.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
The @type from virFileReadValueString needs to be VIR_FREE each time
through the loop since it's not saved and since cleanup can be reached
prior to decoding it for @kernel_type amd bank->type, the cleanup code
needs to also have a VIR_FREE
Found by Coverity
We're only adding only info about L3 caches, we can add more
later (just by changing one line), but for now that's more than enough
without overwhelming anyone.
XML snippet of how this should look like (also seen as part of the commit):
<cache>
<bank id='0' level='3' type='both' size='8192' unit='KiB' cpus='0-7'/>
</cache>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
It is no longer needed thanks to the great virfilewrapper.c. And this
way we don't have to add a new set of functions for each prefixed
path.
While on that, add two functions that weren't there before, string and
scaled integer reading ones. Also increase the length of the string
being read by one to accompany for the optional newline at the
end (i.e. change INT_STRLEN_BOUND to INT_BUFSIZE_BOUND).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When adding a nwfilter onto the list in
virNWFilterObjListAssignDef() this array is re-allocated to match
demand for new size. However, it is never freed leading to a
leak:
==26535== 136 bytes in 1 blocks are definitely lost in loss record 1,079 of 1,250
==26535== at 0x4C2E2BE: realloc (vg_replace_malloc.c:785)
==26535== by 0x54BA28E: virReallocN (viralloc.c:245)
==26535== by 0x54BA384: virExpandN (viralloc.c:294)
==26535== by 0x54BA657: virInsertElementsN (viralloc.c:436)
==26535== by 0x55DB011: virNWFilterObjListAssignDef (virnwfilterobj.c:362)
==26535== by 0x55DB530: virNWFilterObjListLoadConfig (virnwfilterobj.c:503)
==26535== by 0x55DB635: virNWFilterObjListLoadAllConfigs (virnwfilterobj.c:539)
==26535== by 0x2AC5A28B: nwfilterStateInitialize (nwfilter_driver.c:250)
==26535== by 0x5621C64: virStateInitialize (libvirt.c:770)
==26535== by 0x124379: daemonRunStateInit (libvirtd.c:881)
==26535== by 0x554AC78: virThreadHelper (virthread.c:206)
==26535== by 0x8F5F493: start_thread (in /lib64/libpthread-2.23.so)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
... with VIR_NET_GENERATED_MACV???_PREFIX, which is defined in
util/virnetdevmacvlan.h.
Since VIR_NET_GENERATED_PREFIX is used for plain tap devices, it is
renamed to VIR_NET_GENERATED_TAP_PREFIX and moved to virnetdev.h
The parser had been clearing out *all* suggested device names for
type='direct' (aka macvtap) interfaces. All of the code implementing
macvtap allows for a user-specified device name, so we should allow
it. In the case that an interface name starts with "macvtap" or
"macvlan" though, we do still clear it out, just as we do with "vnet"
(which is the prefix used for automatically generated tap device
names), since those are the prefixes for the names we autogenerate for
macvtap and macvlan devices.
Resolves: https://bugzilla.redhat.com/1335798
This patch introduces
<cache level='N' mode='emulate'/>
<cache mode='passthrough'/>
<cache mode='disable'/>
sub element of /domain/cpu. Currently only a single <cache> element is
allowed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The type of this parameter is virCPUType so calling it 'mode' is pretty
strange, 'type' is a much better name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Rather than overloading one function - split apart the logic to have
separate interfaces and local/private structures to manage the data
for which the helper is collecting.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than 'nuuids' it should be 'maxuuids' and rather than 'got'
it should be 'nuuids'. Alter the logic of the list traversal to
utilize those names.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than using "ret = -1" and cleanup processing, alter the return
path on failure to goto error and then just return the data.got.
In the error path, we no longer check for ret < 0, we just can free
anything added to the array and return -1 directly.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than dereferencing obj->def->X, create a local 'def' variable
that will dereference the def and use directly.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When processing a virSecretPtr use 'secret' as a variable name.
When processing a virSecretObjPtr use 'obj' as a variable name.
When processing a virSecretDefPtr use 'def' as a variable name,
unless a distinction needs to be made with a 'newdef' such as
virSecretObjListAddLocked (which also used the VIR_STEAL_PTR macro
for the configFile and base64File).
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have the caller check if !obj before calling, just check
in the function for !obj and return.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Make various virSecretObjList*Locked functions static and make
virSecretObjNew static since they're only called within virtsecretobj.c.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Only save the config when using a generated UUID if we were able to
create an object for the def. There could have been "other reasons"
for the assignment to fail, so saving the config could be incorrect.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than "wait" for the first config file to be created, force creation
of the configDir during driver state initialization.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Essentially virNWFilterSaveDef executed in a different order the same
sequence of calls, so let's just make one point of reference.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move from virnwfilterobj.h to virnwfilterobj.c.
Create the virNWFilterObjListNew() API in order to allocate.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the structure to virnwfilterobj.c and create necessary accessor API's
for the various fields.
Also make virNWFilterObjFree static since there's no external callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than dereferencing obj->def->XXX or nwfilters->objs[i]->X
create local virNWFilterObjPtr and virNWFilterDefPtr variables.
Future adjustments will be privatizing the object more, so this just
prepares the code for that reality.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When processing a virNWFilterPtr use 'nwfilter' as a variable name.
When processing a virNWFilterObjPtr use 'obj' as a variable name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Instead of figuring out upfront whether <input> will be a single
or a pair element, format the subelements into a separate buffer
and close <input/> early if this buffer is empty.
Shorten the time needed to keep the list lock and alter the cleanup
path to be more of an error path.
Utilize the the virObjectListFree function to handle the calls for
virObjectUnref on each list element and the VIR_FREE of the list
instead of open coding it.
Change the name of the virHashForEach callback to match the name
of the Export function with the Callback added onto it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
It was left there after removing a macro it was part of in first
version or so. Now it will always be NULL.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us. The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>. And in
those cases the guest can modify the settings itself.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So far there is probably no change that is allowed to be done
by the VIR_DOMAIN_DEF_PARSE_ABI_UPDATE flag that would break
guest ABI but this may change in the future.
This introduces new VIR_DOMAIN_DEF_PARSE_ABI_UPDATE_MIGRATION
which should be used only for ABI updates that are "safe" for
persistent migration.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Use "virNetworkObj" as a prefix for any external API in virnetworkobj.
Also a couple of functions were local to virnetworkobj.c, so remove their
external defs in virnetworkobj.h.
Rename the API to be a better description of what it does. Besides, a
subsequent patch will rename virNetworkAssignDef to virNetworkObjAssignDef
so rather than make that patch confusing we'll take the intermittent step
in this patch.
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Move all the virNetworkObj related API/data structures into their own
modules virnetworkobj.{c,h} from the network_conf.{c,h}
Purely code motion at this point plus adjustments to cleanly build
Mostly code motion to move nwfilterConnectListNWFilters into nwfilterobj.c
and rename to virNWFilterObjGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Mostly code motion from nwfilter_driver to virnwfilterobj with one caveat
to add the virNWFilterObjListFilter typedef and pass it as an 'aclfilter'
argument to allow for future possible test driver adjustments to count
the number of filters (similar to how node device has done this).
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1420740
If the parent is not a scsi_host, then we can just happily return since
we won't be removing a vport.
Fixes a bug with the following output:
$ virsh pool-destroy host4_hba_pool
error: Failed to destroy pool host4_hba_pool
error: internal error: Invalid adapter name 'pci_0000_10_00_1' for SCSI pool
$
https://bugzilla.redhat.com/show_bug.cgi?id=1233129
The virStoragePoolObjSourceFindDuplicate logic used by PoolCreateXML
and PoolDefineXML avoids comparing the new definition against "other"
pool types. This can cause unexpected corruption if two different pool
source types used the same source device path. For example, a 'disk'
pool using source type device=/dev/sdc could be unwittingly overwritten
by using /dev/sdc for a 'logical' pool which also uses the source
device path.
So rather than blindly ignoring those checks when def->type !=
pool->def->type - have the pool->def->type switch logic handle the
check for which def->type's should be checked.
Refactor virStoragePoolObjSourceFindDuplicate into smaller units
separated by the "supported" pool source type. The ISCSI, FS,
LOGICAL, DISK, and ZFS pools can use "<source>... <device='%s'/>...
</source>".
Alter the logic slightly to return the matching pool or NULL rather
than setting matchpool = pool and break. Easier to read that way.
In the effort to reduce the virStoragePoolObjSourceFindDuplicate logic,
create a new helper which will handle all the ISCSI type differences.
Alter things just a little bit to return NULL or pool rather than
using breaks and matchpool = pool, then break. Also rather than creating
variables withing the if...else if... conditions, have them all at the
top of the function to make things a bit easier to read.
Refactor virStoragePoolObjSourceFindDuplicate into smaller units
separated by the "supported" pool source type. The DIR, GLUSTER,
and NETFS pools all can use "<source>... <dir='%s'/>... </source>".
Alter the logic slightly to return the matching pool or NULL rather
than setting matchpool = pool and break. Easier to read that way.
The property is necessary also for the disk using the source (e.g. cdrom)
which needs to be kept readonly.
Commit '462c4b66' was a bit too aggressive in this aspect, since the
readonly flag is set only while parsing.
Mostly code motion to move storageConnectList[Defined]StoragePools
and similar test driver code into virstorageobj.c and rename to
virStoragePoolObjGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOf[Defined]StoragePools API into virstorageobj.c from
storage_driver and test_driver. The only real difference between the
two is the test driver doesn't call using the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Mostly code motion to move storagePoolListVolumes code into virstorageobj.c
and rename to virStoragePoolObjVolumeGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOfVolumes API into virstorageobj.c from storage_driver and
test_driver. The only real difference between the two is the test driver
doesn't call using the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit 14319c81a0 introduced CPU host model in domain capabilities
and the *hostmodel* variable is always filled by virCPUDefCopy()
and needs to be freed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
For both virNodeDeviceObjNumOfDevices and virNodeDeviceObjGetNames, the
check should be if the aclfilter doesn't exist or if it does exist, then
it must pass
Unify the *ListDevice API into virnodedeviceobj.c from node_device_driver
and test_driver. The only real difference between the two is that the test
driver doesn't call the aclfilter API. The name of the new API follows that
of other drivers to "GetNames".
NB: Change some variable names to match what they really are - consistency
with other drivers. Also added a clear of the input names.
This also allows virNodeDeviceObjHasCap to be static to virnodedeviceobj
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOfDevices API into virnodedeviceobj.c from node_device_driver
and test_driver. The only real difference between the two is that the test
driver doesn't call the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unlike other drivers, this is a test driver only API. Still combining
the logic of testConnectListInterfaces and testConnectListDefinedInterfaces
makes things a bit easier in the long run.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unlike other drivers, this is a test driver only API. Still combining
the logic of testConnectNumOfInterfaces and testConnectNumOfDefinedInterfaces
makes things a bit easier in the long run.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If formatting NUMA topology fails, the function returns immediatelly,
but the buffer structure allocated on the stack references lot of
heap-allocated memory and that would get lost in such case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Even though the virMacMap object is not necessarily created at
the same time as the network object, the former makes no sense
without the latter and thus should be unref'd in the network
object dispose function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, if we want to zero out disk source (e,g, due to
startupPolicy when starting up a domain) we use
virDomainDiskSetSource(disk, NULL). This works well for file
based storage (storage type file, dir, or block). But it doesn't
work at all for other types like volume and network.
So imagine that you have a domain that has a CDROM configured
which source is a volume from an inactive pool. Because it is
startupPolicy='optional', the CDROM is empty when the domain
starts. However, the source element is not cleared out in the
status XML and thus when the daemon restarts and tries to
reconnect to the domain it refreshes the disks (which fails - the
storage pool is still not running) and thus the domain is killed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far our code is full of the following pattern:
dom = virGetDomain(conn, name, uuid)
if (dom)
dom->id = 42;
There is no reasong why it couldn't be just:
dom = virGetDomain(conn, name, uuid, id);
After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1398087
Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.
Also modify the storage pool XML parsing algorithm to check for the
mismatched "name" and "source-name".
While parsing if the storage source is not present, then a defaultFormat
was not set. This could lead to oddities such as seeing "unknown" format
in output for the "logical" pool even though the only format the pool could
support would be "lvm2".
This does "put a label" on other pool defaults as follows:
File System: FS_AUTO
Network File System: NETFS_AUTO
Disk: UNKNOWN
Each of which is the "0" value for their respective pools and thus
would be no "real" change.
The frequency is documented and formatted as an attribute of the <timer>
element rather than a nested <frequency> element expected by the parser.
Luckily enough, timer frequency has not been used by any driver so far.
And users were not able to set it in the XML either.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This is the maximum for many reasons, for starters because index ==
bus number, and a controller's bus number is 8 bits.
This incidentally resolves: https://bugzilla.redhat.com/1329090
This merely introduces virDomainHostdevMatchSubsysMediatedDev method that
is supposed to check whether device being cold-plugged does not already
exist in the domain configuration.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
A mediated device will be identified by a UUID (with 'model' now being
a mandatory <hostdev> attribute to represent the mediated device API) of
the user pre-created mediated device. We also need to make sure that if
user explicitly provides a guest address for a mdev device, the address
type will be matching the device API supported on that specific mediated
device and error out with an incorrect XML message.
The resulting device XML:
<devices>
<hostdev mode='subsystem' type='mdev' model='vfio-pci'>
<source>
<address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'>
</source>
</hostdev>
</devices>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Just to make the code a bit cleaner, move hostdev specific post parse
code to its own function just in case it grows in the future.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Just a tiny wrapper over the SCSI def clearing logic to drop some
if-else branches from a switch, mainly because extending the switch in
the future would render the current code with branching less readable.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Enforce virDomainHostdevSubsysType checking during compilation. Again,
one of a few spots in our code where we should enforce the typecast to
the enum type, thus not forgetting to update *all* switch occurrences
dealing with the give enum.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This way more drivers can utilize the functionality without copying
the code. And we can therefore test it in one place for all of them.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no "node driver" as there was before, drivers have to do
their own ACL checking anyway, so they all specify their functions and
nodeinfo is basically just extending conf/capablities. Hence moving
the code to src/conf/ is the right way to go.
Also that way we can de-duplicate some code that is in virsysfs and/or
virhostcpu that got duplicated during the virhostcpu.c split. And
Some cleanup is done throughout the changes, like adding the vir*
prefix etc.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Guests are handled in callers, but if something goes wrong (when it
cannot be added to virCapabilities, for example), there's no way for
them to free it properly.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
Since the code checks and handles NULL parameters, remove the NONNULL
from the prototype.
Also fix the comment in the source to reference the right name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since the code checks and handles a NULL 'node' before proceeding
there's no need for the prototype with the NONNULL(2).
Signed-off-by: John Ferlan <jferlan@redhat.com>
For some drivers the domain's machine type makes no sense. They
just don't use it. A great example is bhyve driver. Therefore it
makes very less sense to report machine in domain capabilities
XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use "virStoragePoolObj" as a prefix for any external API in virstorageobj.
Also a couple of functions were local to virstorageobj.c, so remove their
external defs iin virstorageobj.h.
NB: The virStorageVolDef* API's won't change.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move all the StoragePoolObj related API's into their own module
virstorageobj from the storage_conf
Purely code motion at this point, plus adjustments to cleanly build
Signed-off-by: John Ferlan <jferlan@redhat.com>
The attribute can be used to request a specific way of checking whether
the virtual CPU matches created by the hypervisor matches the
specification in domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU 2.9 introduces the pcie-root-port device, which is
a generic version of the existing ioh3420 device.
Make the new device available to libvirt users.
Commit id 'bb74a7ffe' added a fairly non specific message when providing
only the <parent wwnn='xxx'/> or <parent wwpn='xxx'/> instead of providing
both wwnn and wwpn. This patch just modifies the message to be more specific
about which was missing.
Rather than returning true/false and having the caller check if the
vHBA was actually created, let's do that check within the CreateVport
function. That way the caller can faithfully assume success based
on a name start the thread looking for the LUNs. Prior to this change
it's possible that the vHBA wasn't really created (e.g if the call to
virVHBAGetHostByWWN returned NULL), we'd claim success, but in reality
there'd be no vHBA for the pool. This also fixes a second yet seen
issue that if the nodedev was present, but the parent by name wasn't
provided (perhaps parent by wwnn/wwpn or by fabric_name), then a failure
would be returned. For this path it shouldn't be an error - we should
just be happy that something else is managing the device and we don't
have to create/delete it.
The end result is that the createVport code can now just start the
refresh thread once it gets a non NULL name back.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the bulk of createVport and rename to virNodeDeviceCreateVport.
Remove the deleteVport entirely and replace with virNodeDeviceDeleteVport
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the virStoragePoolSourceAdapter from storage_conf.h and rename
to virStorageAdapter.
Continue with code realignment for brevity and flow.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework the helpers/APIs to use the FCHost and SCSIHost adapter types.
Continue to realign the code for shorter lines.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework the helpers/APIs to use the FCHost and SCSIHost adapter types.
Continue to realign the code for shorter lines.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have lots of ugly inline code, create helpers to try and
make things more readable. While creating the helpers realign the code
as necessary.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have lots of ugly inline code, create helpers to try and
make things more readable. While creating the helpers realign the code
as necessary.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than use virXPathString, pass along an virXPathNode and alter
the parsing to use virXMLPropString.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Split out the code that munges through the storage pool adapter into
helpers - it's about to be moved into it's own source file.
This is purely code motion at this point.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id 'bb74a7ffe' added some new fields to search for a fchost by
parent wwnn/wwpn or parent_fabric_name, but neglected to validate that
the data within the fields was valid at parse time. This could lead to
eventual failure at run time, so rather than have the failure then, let's
validate now.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1428209
Commit id 'bb74a7ffe' neglected to check that both the parent_wwnn
parent_wwpn are in the XML if one or the other is similar to how
the node device code checked (commit id '2b13361bc').
If only one is provided, the "default" is to use a vHBA capable
adapter (see commit id '78be2e8b'), so the vHBA could start, but
perhaps not on the expected adapter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.
Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.
At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:
<memory model='nvdimm'>
<source>
<path>/tmp/nvdimm</path>
</source>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
<address type='dimm' slot='0'/>
</memory>
So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.
For more info on NVDIMM visit the following web page:
http://pmem.io/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
VIR_CONNECT_LIST_STORAGE_POOLS_VSTORAGE and
VIR_CONNECT_LIST_STORAGE_POOLS_ZFS were added to libvirt but the listing
API was not properly updated to use them.
https://bugzilla.redhat.com/show_bug.cgi?id=1431543
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
bhyve supports 'gop' video device that allows clients to connect
to VMs using VNC clients. This commit adds support for that to
the bhyve driver:
- Introducr 'gop' video device type
- Add capabilities probing for the 'fbuf' device that's
responsible for graphics
- Update command builder routines to let users configure
domain's VNC via gop graphics.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
This reverts commit c96bd78e4e.
So our code is one big mess and we modify domain definition while
building qemu_command line and our hotplug code share only part
of the parsing and command line building code. Let's revert
that change because to fix it properly would require refactor and
move a lot of things.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1430275
We should skip <listen type='socket'/> only if the 'socket' path
is specified because if there is no 'socket' path we need to
keep that element in migratable XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1366088
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When libvirtd is started we call qemuDomainRecheckInternalPaths
to detect whether a domain has VNC socket path generated by libvirt
based on option from qemu.conf. However if we are parsing status XML
for running domain the existing socket path can be generated also if
the config XML uses the new <listen type='socket'/> element without
specifying any socket.
The current code doesn't make difference how the socket was generated
and always marks it as "fromConfig". We need to store the
"autoGenerated" value in the status XML in order to preserve that
information.
The difference between "fromConfig" and "autoGenerated" is important
for migration, because if the socket is based on "fromConfig" we don't
print it into the migratable XML and we assume that user has properly
configured qemu.conf on both hosts. However if the socket is based
on "autoGenerated" it means that a new feature was used and therefore
we need to leave the socket in migratable XML to make sure that if
this feature is not supported on destination the migration will fail.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Move all the NWFilterObj API's into their own module virnwfilterobj
from the nwfilter_conf
Purely code motion at this point, plus adjustments to cleanly build.
Proposed formal coding conventions encourage defining typedefs for
vir[Blah] and vir[Blah]Ptr separately from the associated struct named
_vir[Blah]:
typedef struct _virBlah virBlah;
typedef virBlah *virBlahPtr;
struct _virBlah {
...
};
At some point in the past, I had submitted several patches using a
more compact style that I prefer, and they were accepted:
typedef struct _virBlah {
...
} virBlah, *virBlahPtr;
Since these are by far a minority among all struct definitions, this
patch changes all those definitions to reflect the style prefered by
the proposal so that there is 100% consistency.
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Changes in commit id 'dec6d9df' caused a compilation failure on a RHEL6
CI build environment. So just replace 'system' with 'syscap' as a name.
cc1: warnings being treated as errors
../../src/conf/node_device_conf.c: In function 'virNodeDevCapSystemParseXML':
../../src/conf/node_device_conf.c:1415: error: declaration of 'system' shadows a global declaration [-Wshadow]
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Move all the NodeDeviceObj API's into their own module virnodedeviceobj
from the node_device_conf
Purely code motion at this point, plus adjustments to cleanly build.
The 'nodes' is overwritten after the first usage and possibly leaked
if any code in the first set of parsing goes to error.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In GCC 7 there is a new warning triggered when a switch
case has a conditional statement (eg if ... else...) and
some of the code paths fallthrough to the next switch
statement. e.g.
conf/domain_conf.c: In function 'virDomainChrEquals':
conf/domain_conf.c:14926:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (src->targetTypeAttr != tgt->targetTypeAttr)
^
conf/domain_conf.c:14928:5: note: here
case VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE:
^~~~
conf/domain_conf.c: In function 'virDomainChrDefFormat':
conf/domain_conf.c:22143:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (def->targetTypeAttr) {
^
conf/domain_conf.c:22151:5: note: here
default:
^~~~~~~
GCC introduced a __attribute__((fallthrough)) to let you
indicate that this is intentionale behaviour rather than
a bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When switching over the values in the virDomainControllerModelPCI
enumeration, make sure the proper cast is in place so that the
compiler can warn us when the coverage is not exaustive.
For the same reason, remove the 'default' case from one of the
existing switch statements.
The switch in virDomainPCIControllerModelToConnectType()
had some code that, while techically part of the
_PCIE_SWITCH_DOWNSTREAM_PORT case, was in fact dead due
to the early return.
Get rid of the dead code, and fix the inaccurate function
description while at it.
Our virSomeEnumTypeFromString() functions return either the value
of item from the enum or -1 on error. Usually however the value 0
means 'this value is not set in the domain XML, use some sensible
default'. Therefore, we don't accept corresponding string in
domain XML, for instance:
<memoryBacking>
<source mode="none"/>
<access mode="default"/>
<allocation mode="none"/>
</memoryBacking>
should be rejected as invalid XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than the inlined VIR_FREE's, use a cleanup: label... Fixes an
issue introduced by 03346def where @name was free'd before usage in
a virAsprintf to format scsi_host_name.
The niothreadids struct field is size_t, so must use %zu not %lu
with printf. While they're identical on some platforms, on others
they are different, causing warnings
conf/domain_conf.c: In function 'virDomainDefCheckABIStabilityFlags':
conf/domain_conf.c:19575:26: error: format '%lu' expects argument of type 'long unsigned int', but argument 7 has type 'size_t {aka unsigned int}' [-Werror=format=]
_("Target domain iothreads count %lu does not "
^
conf/domain_conf.c: In function 'virDomainDefFormatInternal':
conf/domain_conf.c:23915:46: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t {aka unsigned int}' [-Werror=format=]
virBufferAsprintf(buf, "<iothreads>%lu</iothreads>\n",
^
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a test that allows providing the parent fabric_wwn in the input XML
in order to create the vHBA.
This also fixes a mixed setting of the fabric_wwn field from the read
test driver XML strings.
Rework the code to perform the various searches by parent, parent_wwnn/
parent_wwpn, parent_fabric_wwn, or vport capable in order to return the
'parent_host' number that is vHBA capable.
The former virNodeDeviceGetParentHost is renamed to add the ByParent
on it fixes an issue where if no parent was supplied in the XML to
create the vHBA, then virNodeDeviceFindByName was called with a NULL
second parameter which had bad results.
The reworked code will make the various calls to fetch the NPIV host
by the passed parameter options or if none are provided find a vport
capable NPIV HBA to perform the create. If the call is from the delete
path, then this option won't be allowed.
Each of virNodeDeviceGetParentHostBy* functions is now static, so
remove them external definitions.
A secondary benefit of this is the test_driver now can make use of
the new API to add some new tests to test the various creation options.
Create a virscsihost.c and place the functions there. That removes the
last #ifdef __linux__ from virutil.c.
Take the opporunity to also change the function names and in one case
the parameters slightly
Use the new virNodeDeviceGetParentName instead. Modify the callers to
build the node device scsi_host# name string in order to call the new
function so that proper lookup occurs.
Rather than have them mixed in with the virutil apis, create a separate
virvhba.c module and move the vHBA related calls into there. Soon there
will be more added.
Also modify the names of the functions and some arguments to be more
indicative of what is really happening. Adjust the callers respectively.
While I was changing fchosttest, rather than the non-descriptive names
test1...test6, rename them to match what the test is doing.
Build fails with:
conf/node_device_conf.c:825:62: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
if ((data->drm.type = virNodeDevDRMTypeFromString(type)) < 0) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~
conf/node_device_conf.c:1801:59: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
if ((type = virNodeDevDevnodeTypeFromString(tmp)) < 0) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~
2 errors generated.
Fix by using intermediate variable to store the result similarly
to how it's done for other FromString* calls.
After 7f1bdec5fa our nodedev driver is capable of
determining DRM devices (DRM stands for Direct Render Manager not
Digital rights management). There is still one bit missing
though: virConnectListAllNodeDevices() is capable of listing
either all devices or just those with specified capability. Well,
DRM capability is missing there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new attribute 'rendernode' to <gl> spice element.
Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new 'drm' capability for Direct Rendering Manager (DRM) devices,
providing device type information.
Teach the udev backend to populate those devices.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add new <devnode> top-level <device> element, that list the associated
/dev files. Distinguish the main /dev name from symlinks with a 'type'
attribute of value 'dev' or 'symlink'.
Update a test to check XML schema, and actually add it to the test list
since it was missing.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When the 'parent' was added to the virNodeDevicePtr structure
by commit id 'e8a4ea75a' the 'parent' field was not properly filled
in when a virGetNodeDevice call was made within driver/config code.
Only the device name was ever filled in. Fetching the parent required
a second trip via virNodeDeviceGetParent into the node device lookup
code was required in order to retrieve the specific parent field (and
still the parent field was never filled in although it was free'd).
Since we have the data when we initially call virGetNodeDevice from
within driver/node_config code - let's just fill in the parent field
as well for anyone that wants it without requiring another trip into
the node_device lookup just to get the parent.
This will allow API's such as virConnectListAllNodeDevices,
virNodeDeviceLookupByName, and virNodeDeviceLookupSCSIHostByWWN
to retrieve both name and parent in the returned virNodeDevicePtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the range check introduced by commit 2650d5e into
virDomainUSBAddressFindPort. That way both virDomainUSBAddressRelease
and virDomainUSBAddressSetAddHub can benefit from it.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
If virDomainChrSourceDefNew(xmlopt) fails, it will lead to free()ing
the uninitialized pointer bus. The fix for this is to initialize bus
with NULL.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
This part introduces new xml elements for file based
memorybacking support and their parsing.
(It allows vhost-user to be used without hugepages.)
New xml elements:
<memoryBacking>
<source type="file|anonymous"/>
<access mode="shared|private"/>
<allocation mode="immediate|ondemand"/>
</memoryBacking>
Rename to avoid duplicate code. Because virDomainMemoryAccess will be
used in memorybacking for setting default behaviour.
NOTE: The enum cannot be moved to qemu/domain_conf because of headers
dependency
Example:
<network>
...
<mtu size='9000'/>
...
If mtu is unset, it's assumed that we want the default for whatever is
the underlying transport (usually this is 1500).
This setting isn't yet wired in, so it will have no effect.
This partially resolves: https://bugzilla.redhat.com/1224348
The issue is that if this graphics definition is provided:
<graphics type='vnc' port='0'/>
it's parsed as:
<graphics type='vnc' autoport='no'>
<listen type='address'/>
</graphics>
but if the resulting XML is parsed again the output is:
<graphics type='vnc' port='-1' autoport='yes'>
<listen type='address'/>
</graphics>
and this should not happen. The XML have to always remain the same
after it was already parsed by libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1383039
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We use @ret to hold the actual return value of the function we
are currently in. To hold a return value of a function called we
use different variables: @rv, @rc, etc. Honour this naming
scheme in virDomainNetDefParseXML too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
==24748== 12 bytes in 2 blocks are definitely lost in loss record 25 of 84
==24748== at 0x4C2BF80: malloc (vg_replace_malloc.c:296)
==24748== by 0x1A1E1E78: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==24748== by 0x18D0495F: virXMLPropString (virxml.c:506)
==24748== by 0x18D1FB3E: virDomainHostdevSubsysSCSIVHostDefParseXML (domain_conf.c:6280)
==24748== by 0x18D20350: virDomainHostdevDefParseXMLSubsys (domain_conf.c:6450)
==24748== by 0x18D34E7D: virDomainHostdevDefParseXML (domain_conf.c:13218)
==24748== by 0x18D42598: virDomainDefParseXML (domain_conf.c:17745)
==24748== by 0x18D440A9: virDomainDefParseNode (domain_conf.c:18236)
==24748== by 0x18D43EFA: virDomainDefParse (domain_conf.c:18180)
==24748== by 0x18D43FA0: virDomainDefParseFile (domain_conf.c:18206)
==24748== by 0x44EDA1: testCompareDomXML2XMLFiles (testutils.c:1140)
==24748== by 0x4365F8: testXML2XMLActive (qemuxml2xmltest.c:59)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Surprisingly there was a virDomainPCIAddressReleaseAddr() function
already, but it was completely unused. Since we don't reserve entire
slots at once any more, there is no need to release entire slots
either, so we just replace the single call to
virDomainPCIAddressReleaseSlot() with a call to
virDomainPCIAddressReleaseAddr() and remove the now unused function.
The keen observer may be concerned that ...Addr() doesn't call
virDomainPCIAddressValidate(), as ...Slot() did. But really the
validation was pointless anyway - if the device hadn't been suitable
to be connected at that address, it would have failed validation
before every being reserved in the first place, so by definition it
will pass validation when it is being unplugged. (And anyway, even if
something "bad" happened and we managed to have a device incorrectly
at the given address, we would still want to be able to free it up for
use by a device that *did* validate properly).
This is in preparation for renaming virDomainPCIAddressReserveSlot()
to virDomainPCIAddressReserveAddr(), which is a better description of
what it does.
Since we don't actually reserve an entire slot at a time anymore, the
name of this function is just confusing, and it's almost identical in
operation to virDomainPCIAddressReserveNextAddr() anyway, so remove
the *Slot() function and replace calls to it with calls to *Addr(...,
-1).
With the advent of VIR_PCI_CONNECT_AGGREGATE_SLOT, the new name is
more appropriate, since the address returned may be another address
on the same slot as last time, not necessarily a new slot.
fromConfig should be true if the caller wants
virDomainPCIAddressValidate() to loosen restrictions on its
interpretation of the pciConnectFlags. In particular, either
PCI_DEVICE or PCIE_DEVICE will be counted as equivalent to both, and
HOTPLUG will be ignored. In a few cases where libvirt was manually
overriding automatic address assignment, it was setting fromConfig to
false when validating the hardcoded manual override. This patch
changes those to fromConfig=true as a preemptive strike against any
future bugs that might otherwise surface.
Although setting virDomainPCIAddressReserveAddr()'s fromConfig=true is
correct when a PCI addres is coming from a domain's config, the *true*
purpose of the fromConfig argument is to lower restrictions on what
kind of device can plug into what kind of controller - if fromConfig
is true, then a PCIE_DEVICE can plug into a slot that is marked as
only compatible with PCI_DEVICE (and vice versa), and the HOTPLUG flag
is ignored.
For a long time there have been several calls to
virDomainPCIAddressReserveAddr() that have fromConfig incorrectly set
to false - it's correct that the addresses aren't coming from user
config, but they are coming from hardcoded exceptions in libvirt that
should, if anything, pay *even less* attention to following the
pciConnectFlags (under the assumption that the libvirt programmer knew
what they were doing).
See commit b87703cf7 for an example of an actual bug caused by the
incorrect setting of the "fromConfig" argument to
virDomainPCIAddressReserveAddr(). Although they haven't resulted in
any reported bugs, this patch corrects all the other incorrect
settings of fromConfig in calls to virDomainPCIAddressReserveAddr().
Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so
that they will be assigned to all the functions on a slot.
Some qemu test case outputs had to be adjusted due to the
pcie-root-ports now being put on multiple functions.
If a PCI device has VIR_PCI_CONNECT_AGGREGATE_SLOT set in its
pciConnectFlags, then during address assignment we allow multiple
instances of this type of device to be auto-assigned to multiple
functions on the same device. A slot is used for aggregating multiple
devices only if the first device assigned to that slot had
VIR_PCI_CONNECT_AGGREGATE_SLOT set. but any device types that have
AGGREGATE_SLOT set might be mix/matched on the same slot.
(NB: libvirt should never set the AGGREGATE_SLOT flag for a device
type that might need to be hotplugged. Currently it is only planned
for pcie-root-port and possibly other PCI controller types, and none
of those are hotpluggable anyway)
There aren't yet any devices that use this flag. That will be in a
later patch.
This utility function iterates through all devices looking for any
with a PCI address that has function != 0 (which implies that multiple
functions are in use on that slot), then uses an inner iterator to
find the device that's on function 0 of that same slot and sets the
"multi" in its virDomainDeviceInfo (as long as it hasn't already been
set explicitly by someone who presumably has better information than
we do).
It isn't yet called from anywhere, so will have no functional effect.
There is a very slight time advantage to beginning the search for the
next unused PCI address at the slot *after* the previous find (which
is now used), but if we do that, we will miss allocating the other
functions of the same slot (when we implement a
VIR_PCI_CONNECT_AGGREGATE_SLOT flag to support that).
virDomainPCIAddressGetNextSlot() starts searching from the last
allocated address and goes to the end of all the buses, then goes back
to the first bus and searches from there up to the starting point (in
case any address has been freed since the last time an address was
allocated. The loops for these two are almost, but not exactly, the
same, so they have remained as separate loops with the same code
inside the loop. To lessen maintenance headaches, the identical code
has been moved out into the function
virDomainPCIAddressFindUnusedFunctionOnBus(), which is called in place
of the loop contents.
setting reserveEntireSlot really accomplishes nothing - instead of
going to the trouble of computing the value for reserveEntireSlot and
then possibly setting *all* functions of the slot as in-use, we can
just set the in-use bit only for the specific function being used by a
device. Later we will know from the context (the PCI connect flags,
and whether we are reserving a specific address or asking for "the
next available") whether or not it is okay to allocate other functions
on the same slot.
Although it's not used yet, we allow specifying "-1" for the function
number when looking for the "next available slot" - this is going to
end up meaning "return the lowest available function in the slot, but
since we currently only provide a function from an otherwise unused
slot, "-1" ends up meaning "0".
When keeping track of which functions of which slots are allocated, we
will need to have more information than just the current bitmap with a
bit for each function that is currently stored for each slot in a
virDomainPCIAddressBus. To prepare for adding more per-slot info, this
patch changes "uint8_t slots" into "virDomainPCIAddressSlot slot", which
currently has a single member named "functions" that serves the same
purpose previously served directly by "slots".
The public virSecret object has a single "usage_id" field
but the virSecretDef object has a different 'char *' field
for each usage type, but the code all assumes every usage
type has a corresponding single string. Get rid of the
pointless union in virSecretDef and just use "usage_id"
everywhere. This doesn't impact public XML format, only
the internal handling.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add new fields to the fchost structure to allow creation of a vHBA via
the storage pool when a parent_wwnn/parent_wwpn or parent_fabric_wwn is
supplied in the storage pool XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1349696
When creating a vHBA, the process is to feed XML to nodeDeviceCreateXML
that lists the <parent> scsi_hostX to use to create the vHBA. However,
between reboots, it's possible that the <parent> changes its scsi_hostX
to scsi_hostY and saved XML to perform the creation will either fail or
create a vHBA using the wrong parent.
So add the ability to provide "wwnn" and "wwpn" or "fabric_wwn" to
the <parent> instead of a name of the scsi_hostN that is the parent.
The allowed XML will thus be:
<parent>scsi_host3</parent> (current)
or
<parent wwnn='$WWNN' wwpn='$WWPN'/>
or
<parent fabric_wwn='$WWNN'/>
Using the wwnn/wwpn or fabric_wwn ensures the same 'scsi_hostN' is
selected between hardware reconfigs or host reboots. The fabric_wwn
Using the wwnn/wwpn pair will provide the most specific search option,
while fabric_wwn will at least ensure usage of the same SAN, but maybe
not the same scsi_hostN.
This patch will add the new fields to the nodedev.rng for input purposes
only since the input XML is essentially thrown away, no need to Format
the values since they'd already be printed as part of the scsi_host
data block.
New API virNodeDeviceGetParentHostByWWNs will take the parent "wwnn" and
"wwpn" in order to search the list of devices for matching capability
data fields wwnn and wwpn.
New API virNodeDeviceGetParentHostByFabricWWN will take the parent "fabric_wwn"
in order to search the list of devices for matching capability data field
fabric_wwn.
If a <parent> is not supplied in the XML used to create a non-persistent
vHBA, then instead of failing, let's try to find a "vports" capable node
device and use that.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Extract out code from virNodeDeviceGetParentHost into helpers - it's
going to be reused in upcoming patches to search on more fields
Create virNodeDeviceFindVPORTCapDef in order to return a virNodeDevCapsDefPtr
of the VPORT_OPS and virNodeDeviceFindFCParentHost to use the function and
generate an error message if the device doesn't have the capability.
Also clean up the processing in virNodeDeviceGetParentHost to remove
need for goto's.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Although the virStorageBackendUpdateVolTargetInfo will update the
target.physical value, there is no way to provide that information
via the virStorageGetVolInfo API since it only returns the capacity
and allocation of a volume. So as described in commit id '0282ca45',
it should be possible to generate an output only <physical> value
for that purpose.
This patch generates the <physical> value in the volume XML output
for the sole purpose of being able to view/see the value to allow
someone to parse the XML in order to obtain the value.
Update the documentation to describe the output only nature.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This patch detects a misconfiguration between the disk bus type and disk
address type for controller based disk buses (SATA, SCSI, FDC and
IDE). The addresses of these bus types are all managed in common code so
it's possible to decide in common code whether the disk address and bus
type are compatible or not.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
This function will be needed by the QEMU driver in an upcoming
patch. Additionally, removed a useless empty line.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Similarly to localOnly DNS domain, localPtr attribute can be used to
tell the DNS server not to forward reverse lookups for unknown IPs which
belong to the virtual network.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Iterating over all child nodes when we only support one instance of each
child is pretty weird. And it would even cause memory leaks if more
than one <tftp> element was specified.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When save/migrate a domain and we autogenerated a port, then if we
print the inactive domain config, write out a -1 for the socket value;
otherwise, it's possible that the subsequent start will fail if the
autogenerated websocket used conflicts with an existing running config
that also used autogenerated websockets.
Examples:
== A. Can not restore domain with autoconfigured websocket.
domain 1 and 2 have autoconfigured websocket.
1. domain 1 is started then, saved
2. domain 2 is started
3. domain 1 restoration is failed:
error: internal error: qemu unexpectedly closed the monitor: 2016-11-21T10:23:11.356687Z
qemu-kvm: -vnc 0.0.0.0:2,websocket=5700: Failed to start VNC server on `(null)':
Failed to bind socket: Address already in use
== B. Can not migrate domain with autoconfigured websocket.
domain 1 on host A, domain 2 on host B, both have autoconfigured websocket
1. domain 1 started, domain 2 started
2. domain 1 migration to host B is failed with the above error.
So far this function takes virDomainObjPtr which:
1) is an overkill,
2) might be not available in all the places we will use it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the great rework of how we store vcpu- and iothread-related
data, we have overly complex part of code that is trying to format the
scheduler tuning data in as less lines as possible by grouping
settings for multiple threads. That was designed as an input syntax
sugar for users, but we don't need to also use that when formatting
the XML. Switching to simple enumeration makes the code nicer,
shorter and more welcoming to future changes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Now that we have a module that's able to track
<domain, mac addres list> pairs, hook it up into
our network driver.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are couple of places where we have a string and want to
save it to a file. Atomically. In all those places we use
virFileRewrite() but also implement the very same callback which
takes the string and write it into temp file. This makes no
sense. Unify the callbacks and move them to one place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Modify _virDomainBlockIoTuneInfo and rng schema to support the group_name
option for iotune throttling. Document the new value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a global check for duplicate drive addresses. This will fix the
problem of duplicate disk and hostdev drive addresses.
Example for duplicate drive addresses:
<disk>
...
<target name='sda'/>
</disk>
<disk>
...
<target name='sdb'/>
<address type='drive' controller=0 bus=0 target=0 unit=0/>
</disk>
Another example:
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
...
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
...
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
Unfortunately the fixes (1b08cc170a,
8d46386bfe) weren't enough to catch these
cases and it isn't possible to add additional checks in
virDomainDeviceDefPostParseInternal() for SCSI hostdevs or
virDomainDiskDefAssignAddress() for SCSI/IDE/FDC/SATA disks without
adding another parse flag (virDomainDefParseFlags) to disable this
validation while updating or detaching a disk or hostdev.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Comparing the parameter 'type' against the member 'bus' instead of
against the member 'type' is quite confusing. Rename the parameter
'type' to 'bus_type' to clarify its meaning.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Pass the virDomainDeviceDriveAddress as a struct instead of individual
arguments. Reworked the function descriptions.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When virt-aa-helper parses xml content it can fail on security labels.
It fails by requiring to parse active domain content on seclabels that
are not yet filled in.
Testcase with virt-aa-helper on a minimal xml:
$ cat << EOF > /tmp/test.xml
<domain type='kvm'>
<name>test-seclabel</name>
<uuid>12345678-9abc-def1-2345-6789abcdef00</uuid>
<memory unit='KiB'>1</memory>
<os><type arch='x86_64'>hvm</type></os>
<seclabel type='dynamic' model='apparmor' relabel='yes'/>
<seclabel type='dynamic' model='dac' relabel='yes'/>
</domain>
EOF
$ /usr/lib/libvirt/virt-aa-helper -d -r -p 0 \
-u libvirt-12345678-9abc-def1-2345-6789abcdef00 < /tmp/test.xml
Current Result:
virt-aa-helper: error: could not parse XML
virt-aa-helper: error: could not get VM definition
Expected Result is a valid apparmor profile
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
"host" CPU model is supported by a special host-passthrough CPU mode and
users is not allowed to specify this model directly with custom mode.
Thus we should not advertise "host" CPU model in domain capabilities.
This worked well on architectures for which libvirt provides a list of
supported CPU models in cpu_map.xml (since "host" is not in the list).
But we need to explicitly filter "host" model out for all other
architectures.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
With the QEMU components in place, provide the XML parsing to
invoke that code when given the following XML snippet:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn='naa.501234567890abcd'/>
</hostdev>
An optional address element can be specified within the hostdev
(pick CCW or PCI as necessary):
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0625'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
Add basic vhost-scsi tests which were cloned from hostdev-scsi-virtio-scsi
in both xml2argv and xml2xml. Added ones for both vhost-scsi-ccw and
vhost-scsi-pci since the syntaxes are slightly different between them.
Also adjusted the docs to describe the changes.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
We already have a "scsi" hostdev subsys type, which refers to a single
LUN that is passed through to a guest. But what of things where
multiple LUNs are passed through via a single SCSI HBA, such as with
the vhost-scsi target? Create a new hostdev subsys type that will
carry this.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Use the util function virHostdevIsSCSIDevice() to simplify if
statements.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Old GCC on CentOS 6 thinks vendor and vendor_id might be used
uninitialized in virCPUDefStealModel. The compiler is wrong, though.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Guest CPU definitions with mode='custom' and missing <vendor> are
expected to run on a host CPU from any vendor as long as the required
CPU model can be used as a guest CPU on the host. But even though no CPU
vendor was explicitly requested we would sometimes force it due to a bug
in virCPUUpdate and virCPUTranslate.
The bug would effectively forbid cross vendor migrations even if they
were previously working just fine.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Previously libvirt would only add pci-bridge devices automatically
when an address was requested for a device that required a legacy PCI
slot and none was available. This patch expands that support to
dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a
machine with a pcie-root), and pcie-root-port (which is needed to add
a hotpluggable PCIe device). It does *not* automatically add
pcie-switch-upstream-ports or pcie-switch-downstream-ports (and
currently there are no plans for that).
Given the existing code to auto-add pci-bridge devices, automatically
adding pcie-root-ports is fairly straightforward. The
dmi-to-pci-bridge support is a bit tricky though, for a few reasons:
1) Although the only reason to add a dmi-to-pci-bridge is so that
there is a reasonable place to plug in a pci-bridge controller,
most of the time it's not the presence of a pci-bridge *in the
config* that triggers the requirement to add a dmi-to-pci-bridge.
Rather, it is the presence of a legacy-PCI device in the config,
which triggers auto-add of a pci-bridge, which triggers auto-add of
a dmi-to-pci-bridge (this is handled in
virDomainPCIAddressSetGrow() - if there's a request to add a
pci-bridge we'll check if there is a suitable bus to plug it into;
if not, we first add a dmi-to-pci-bridge).
2) Once there is already a single dmi-to-pci-bridge on the system,
there won't be a need for any more, even if it's full, as long as
there is a pci-bridge with an open slot - you can also plug
pci-bridges into existing pci-bridges. So we have to make sure we
don't add a dmi-to-pci-bridge unless there aren't any
dmi-to-pci-bridges *or* any pci-bridges.
3) Although it is strongly discouraged, it is legal for a pci-bridge
to be directly plugged into pcie-root, and we don't want to
auto-add a dmi-to-pci-bridge if there is already a pci-bridge
that's been forced directly into pcie-root.
Although libvirt will now automatically create a dmi-to-pci-bridge
when it's needed, the code still remains for now that forces a
dmi-to-pci-bridge on all domains with pcie-root (in
qemuDomainDefAddDefaultDevices()). That will be removed in a future
patch.
For now, the pcie-root-ports are added one to a slot, which is a bit
wasteful and means it will fail after 31 total PCIe devices (30 if
there are also some PCI devices), but helps keep the changeset down
for this patch. A future patch will have 8 pcie-root-ports sharing the
functions on a single slot.
This patch cleans up the connect flags for certain types/models of
devices that aren't PCI to return 0. In the future that may be used as
an indicator to the caller about whether or not a device needs a PCI
address. For now it's just ignored, except for in
virDomainPCIAddressEnsureAddr() - called during device hotplug - (and
in some cases actually needs to be re-set to PCI|HOTPLUGGABLE just in
case someone (in some old config) has manually set a PCI address for a
device that isn't PCI.
Before now, all the qemu hotplug functions assumed that all devices to
be hotplugged were legacy PCI endpoint devices
(VIR_PCI_CONNECT_TYPE_PCI_DEVICE). This worked out "okay", because all
devices *are* legacy PCI endpoint devices on x86/440fx machinetypes,
and hotplug didn't work properly on machinetypes using PCIe anyway
(hotplugging onto a legacy PCI slot doesn't work, and until commit
b87703cf any attempt to manually specify a PCIe address for a
hotplugged device would be erroneously rejected).
This patch makes all qemu hotplug operations honor the pciConnectFlags
set by the single all-knowing function
qemuDomainDeviceCalculatePCIConnectFlags(). This is done in 3 steps,
but in a single commit since we would have to touch the other points
at each step anyway:
1) add a flags argument to the hypervisor-agnostic
virDomainPCIAddressEnsureAddr() (previously it hardcoded
..._PCI_DEVICE)
2) add a new qemu-specific function qemuDomainEnsurePCIAddress() which
gets the correct pciConnectFlags for the device from
qemuDomainDeviceConnectFlags(), then calls
virDomainPCIAddressEnsureAddr().
3) in qemu_hotplug.c replace all calls to
virDomainPCIAddressEnsureAddr() with calls to
qemuDomainEnsurePCIAddress()
So in effect, we're putting a "shim" on top of all calls to
virDomainPCIAddressEnsureAddr() that sets the right pciConnectFlags.
The lowest level function of this trio
(qemuDomainDeviceCalculatePCIConnectFlags()) aims to be the single
authority for the virDomainPCIConnectFlags to use for any given device
using a particular arch/machinetype/qemu-binary.
qemuDomainFillDevicePCIConnectFlags() sets info->pciConnectFlags in a
single device (unless it has no virDomainDeviceInfo, in which case
it's a NOP).
qemuDomainFillAllPCIConnectFlags() sets info->pciConnectFlags in all
devices that have a virDomainDeviceInfo
The latter two functions aren't called anywhere yet. This commit is
just making them available. Later patches will replace all the current
hodge-podge of flag settings with calls to this single authority.
As was suggested in an earlier review comment[1], we can
catch some additional code points by cleaning up how we use the
hostdev subsystem type in some switch statements.
[1] End of https://www.redhat.com/archives/libvir-list/2016-September/msg00399.html
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Simplify handling of the 'dimm' address element by allowing to specify
the slot number only. This will allow libvirt to allocate slot numbers
before starting qemu.
The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When starting a new domain, we allocate the USB addresses and keep
an address cache in the domain object's private data.
However this data is lost on libvirtd restart.
Also generate the address cache if all the addresses have been
specified, so that devices hotplugged after libvirtd restart
also get theirs assigned.
https://bugzilla.redhat.com/show_bug.cgi?id=1387666
This time do not require an address cache as a parameter.
Simplify qemuDomainAttachChrDeviceAssignAddr to not generate
the virtio serial address cache for devices of other types.
Partially reverts commit 925fa4b.
Commit 19a148b dropped the cache from QEMU's private domain object.
Assume the callers do not have the cache by default and use
a longer name for the internal ones that do.
This makes the shorter 'virDomainVirtioSerialAddrAutoAssign'
name availabe for a function that will not require the cache.
Add support for a duration/length for the bps/iops and friends.
Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options
total_bytes_sec_max_length
write_bytes_sec_max_length
read_bytes_sec_max_length
total_iops_sec_max_length
write_iops_sec_max_length
read_iops_sec_max_length
There is an existing virDomainPCIAddressReserveNextSlot() which will
reserve all functions of the next available PCI slot. One place in the
qemu PCI address assignment code requires reserving a *single*
function of the next available PCI slot. This patch modifies and
renames virDomainPCIAddressReserveNextSlot() so that it can fulfill
both the original purpose and the need to reserve a single function.
(This is being done so that the abovementioned code in qemu can have
its "kind of open coded" solution replaced with a call to this new
function).
Since TLS was introduced hostwide for libvirt 2.3.0 and a domain
configurable haveTLS was implemented for libvirt 2.4.0, we have to
modify the migratable XML for specific case where the 'tls' attribute
is based on setting from qemu.conf.
The "tlsFromConfig" is libvirt internal attribute and is stored only in
status XML to ensure that when libvirtd is restarted this internal flag
is not lost by the restart.
That flag is used to decide whether we should put *tls* attribute to
migratable XML or not.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently the union has only one member so remove that union. If there
is a need to add a new type of source for new bus in the future this
will force the author to add a union and properly check bus type before
any access to union member.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Rather than VIR_ALLOC() the data, use virDomainChrSourceDefNew in order
to get the private data if necessary.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainRedirdevDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainSmartcardDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
For some reason the values of memballoon model are set using an
anonymous enum, making it impossible to perform nice tricks like
demanding there are cases for all possible values in a switch. This
patch turns the anonymous enum into virDomainMemballoonModel.
Commit id '5f2a132786' should have placed the data in the host source
def structure since that's also used by smartcard, redirdev, and rng in
order to provide a backend tcp channel. The data in the private structure
will be necessary in order to provide the secret properly.
This also renames the previous names from "Chardev" to "ChrSource" for
the private data structures and API's
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
New util function virXMLCheckIllegalChars is now used to test if
parsed network contains illegal char '/' in it's name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Modeled after the qemuDomainHostdevPrivatePtr (commit id '27726d8c'),
create a privateData pointer in the _virDomainChardevDef to allow storage
of private data for a hypervisor in order to at least temporarily store
secret data for usage during qemuBuildCommandLine.
NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the secret data, there's no need to add code
code to handle this new structure there.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The code is entirely correct, but it still managed to trip me
up when I first ran into it because I did not realize right away
that VIR_PCI_CONNECT_TYPES_ENDPOINT was not a single flag, but
rather a mask including both VIR_PCI_CONNECT_TYPE_PCI_DEVICE and
VIR_PCI_CONNECT_TYPE_PCIE_DEVICE.
In order to save the next distracted traveler in PCI Address Land
some time, document this fact with a comment. Add a test case for
the behavior as well.
A pci-bridge has *almost* the same rules as a legacy PCI endpoint
device for where it can be automatically connected, and until now both
had been considered identical. There is one pairing that is okay when
specifically requested by the user (i.e. manual assignment), but we
want to avoid it when auto-assigning addresses - plugging a pci-bridge
directly into pcie-root (it is cleaner to plug in a dmi-to-pci-bridge,
then plug the pci-bridge into that).
In order to allow that difference, this patch makes a separate
CONNECT_TYPE for pci-bridge, and uses it to restrict auto-assigned
addresses for pci-bridges to be only on pci-root, pci-expander-bus,
dmi-to-pci-bridge, or on another pci-bridge.
NB: As with other discouraged-but-seem-to-work configurations
(e.g. plugging a legacy PCI device into a pcie-root-port) if someone
*really* wants to, they can still force a pci-bridge to be plugged
into pcie-root (by manually specifying its PCI address.)
This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Due to the switch of parameters in a call to virDomainShmemDefEquals()
no device was found when looking for device with all the information
except address. Also fix the indentation.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the last event callback is unregistered while the event loop is
dispatching, it is only marked as deleted, but not removed. The number
of callbacks is more than zero in that case, so the timer is not
removed. Because it can be removed in this function now (but also
accessed afterwards so that we set 'isDispatching = false' and have it
locked), we need to temporarily increase the reference counter of the
state for the duration of this function.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is a repeating pattern of code that removes the timer if it's not
needed. So let's move it to a new function. We'll also use it later.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There should be one more reference because it is being kept in the list
of callbacks as an opaque. We also unref it properly using
virObjectFreeCallback.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Make sure that the topology results into a sane number of cpus (up to
UINT_MAX) so that it can be sanely compared to the vcpu count of the VM.
Additionally the helper added in this patch allows to fetch the total
number the topology results to so that it does not have to be
reimplemented later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378290
Sometimes virObjectEventStateFlush can be called without timer (if the
last event was unregistered right when the timer fired). There is a
check for timer == -1, but that triggers warning and other log messages,
which is unnecessary.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Rather than copy-paste - use a macro
Unfortunately due to how the RNG schema was written keeping the 'value'
and 'value'_max next to each other in the XML causes a schema failure,
so the FORMAT has to write out singly rather than optimizing to write
out both values at once
Signed-off-by: John Ferlan <jferlan@redhat.com>
When I added support for the pcie-expander-bus controller in commit
bc07251f, I incorrectly thought that it only had a single slot
available. Actually it has 32 slots, just like the root complex aka
pcie-root (the part that I *did* get correct is that unlike pcie-root
a pcie-expander-bus doesn't allow any integrated endpoint devices -
only pcie-root-ports and dmi-to-pci-controllers are allowed).
This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.
This reverts commit 581b7756af.
This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.
This reverts commit c0f90799bc.
Certain operations may make the vcpu order information invalid. Since
the order is primarily used to ensure migration compatibility and has
basically no other user benefits, clear the order prior to certain
operations and document that it may be cleared.
All the operations that would clear the order can still be properly
executed by defining a new domain configuration rather than using the
helper APIs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370357
So far only guestfwd and virtio were supported. Add an additional
for Xen as libxl channels create a Xen console visible to the guest.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When creating a copy of virDomainDef we save ourselves the
trouble of writing deep-copy functions and just format and parse
back domain/device XML. However, the XML we are parsing was
already fully formatted - there is no reason to run post parse
callbacks (which fill in blanks - there are none!).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is an internal flag that prevents our two entry points to
XML parsing (virDomainDefParse and virDomainDeviceDefParse) from
running post parse callbacks. This is expected to be used in
cases when we already have full domain/device XML and we are just
parsing it back (i.e. virDomainDefCopy or virDomainDeviceDefCopy)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just like virDomainDefPostParseCallback has gained new
parseOpaque argument, we need to follow the logic with
virDomainDeviceDefPostParse.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParseXML and subsequently virDomainDefPostParse too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some callers might want to pass yet another pointer to opaque
data to post parse callbacks. The driver generic one is not
enough because two threads executing post parse callback might
want to see different data (e.g. domain object pointer that
domain def belongs to).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The domain capabilities XML is capable of showing whether each guest CPU
mode is supported or not with a possibility to provide additional
details. This patch enhances host-model capability to advertise the
exact CPU model which will be used as a host-model:
<cpu>
...
<mode name='host-model' supported='yes'>
<model fallback='allow'>Broadwell</model>
<vendor>Intel</vendor>
<feature policy='disable' name='aes'/>
<feature policy='require' name='vmx'/>
</mode>
...
</cpu>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function filters all CPU features through a given callback while
copying CPU model related parts of a CPU definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function moves CPU model related parts from one CPU definition to
another. It can be used to avoid unnecessary copies from a temporary CPU
definitions which will be freed anyway.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Useful for copying a CPU definition without model related parts (i.e.,
without model name, feature list, vendor).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In case a hypervisor is able to tell us a list of supported CPU models
and whether each CPU models can be used on the current host, we can
propagate this to domain capabilities. This is a better alternative
to calling virConnectCompareCPU for each supported CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Listing all CPU models supported by QEMU in domain capabilities makes
little sense when libvirt will refuse any model it doesn't know about.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The patch adds <cpu> element to domain capabilities XML:
<cpu>
<mode name='host-passthrough' supported='yes'/>
<mode name='host-model' supported='yes'/>
<mode name='custom' supported='yes'>
<model>Broadwell</model>
<model>Broadwell-noTSX</model>
...
</mode>
</cpu>
Applications can use it to inspect what CPU configuration modes are
supported for a specific combination of domain type, emulator binary,
guest architecture and machine type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In a full domain config, libvirt allows overriding the normal PCI
vs. PCI Express rules when a device address is explicitly provided
(so, e.g., you can force a legacy PCI device to plug into a PCIe port,
although libvirt would never do that on its own). However, due to a
bug libvirt doesn't give this same leeway when hotplugging devices. On
top of that, current libvirt assumes that *all* devices are legacy
PCI. The result of all this is that it's impossible to hotplug a
device into a PCIe port, even if you manually add the PCI address.
This can all be traced to the function
virDomainPCIAddressEnsureAddr(), and the fact that it calls
virDomainPCIaddressReserveSlot() for manually set addresses, and that
function hardcodes the argument "fromConfig" to false (meaning "this
address was auto-assigned, so it should be subject to stricter
validation").
Since virDomainPCIAddressReserveSlot() is just a one line simple
wrapper around virDomainPCIAddressReserveAddr() (adding in a hardcoded
reserveEntireSlot = true and fromConfig = false), all that's needed to
solve the problem with no unwanted side effects is to replace that
call for virDomainPCIAddressReserveSlot() with a direct call to
virDomainPCIAddressReserveAddr(), but with reserveEntireSlot = true,
fromConfig = true. That's what this patch does.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1337490
Add a new secret usage type known as "tls" - it will handle adding the
secret objects for various TLS objects that need to provide some sort
of passphrase in order to access the credentials.
The format is:
<secret ephemeral='no' private='no'>
<description>Sample TLS secret</description>
<usage type='tls'>
<name>mumblyfratz</name>
</usage>
</secret>
Once defined and a passphrase set, future patches will allow the UUID
to be set in the qemu.conf file and thus used as a secret for various
TLS options such as a chardev serial TCP connection, a NBD client/server
connection, and migration.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the incoming XML defined a path to a TLS X.509 certificate environment,
add the necessary 'tls-creds-x509' object to the VIR_DOMAIN_CHR_TYPE_TCP
character device.
Likewise, if the environment exists the hot unplug needs adjustment as
well. Note that all the return ret were changed to goto cleanup since
the cfg needs to be unref'd
Signed-off-by: John Ferlan <jferlan@redhat.com>
The code for replacing domain's transient definition with the persistent
one is repeated in several places and we'll need to add one more. Let's
make a nice helper for it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In the latest glibc, major() and minor() functions are marked as
deprecated (glibc commit dbab6577):
CC util/libvirt_util_la-vircgroup.lo
util/vircgroup.c: In function 'virCgroupGetBlockDevString':
util/vircgroup.c:768:5: error: '__major_from_sys_types' is deprecated:
In the GNU C Library, `major' is defined by <sys/sysmacros.h>.
For historical compatibility, it is currently defined by
<sys/types.h> as well, but we plan to remove this soon.
To use `major', include <sys/sysmacros.h> directly.
If you did not intend to use a system-defined macro `major',
you should #undef it after including <sys/types.h>.
[-Werror=deprecated-declarations]
if (virAsprintf(&ret, "%d:%d ", major(sb.st_rdev), minor(sb.st_rdev)) < 0)
^~
In file included from /usr/include/features.h:397:0,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdio.h:28,
from ../gnulib/lib/stdio.h:43,
from util/vircgroup.c:26:
/usr/include/sys/sysmacros.h:87:1: note: declared here
__SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL)
^
Moreover, in the glibc commit, there's suggestion to keep
ordering of including of header files as implemented here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the domain lock is not held during preparation of an external XML
config, it is possible that the value can change resulting in unexpected
failures during ABI consistency checking for some save and migrate
operations.
This patch adds a new flag to skip the checking of the cur_balloon value
and then sets the destination value to the source value to ensure
subsequent checks without the skip flag will succeed.
This way it is protected from forges and is keeped up to date too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The 'multi' element in PCI address struct used as 'virTristateSwitch',
and its default value is 'VIR_TRISTATE_SWITCH_ABSENT'. Current PCI
process use 'false' to initialization 'multi', which is ambiguously
for assignment or comparison. This patch use '{0}' to initialize
the whole PCI address struct, which fix the 'multi' initialization
and makes code more simplify and explicitly.
Signed-off-by: Xian Han Yu <xhyubj@linux.vnet.ibm.com>
Test 12 from objecteventtest (createXML add event) segaults on FreeBSD
with bus error.
At some point it calls testNodeDeviceDestroy() from the test driver. And
it fails when it tries to unlock the device in the "out:" label of this
function.
Unlocking fails because the previous step was a call to
virNodeDeviceObjRemove from conf/node_device_conf.c. This function
removes the given device from the device list and cleans up the object,
including destroying of its mutex. However, it does not nullify the pointer
that was given to it.
As a result, we end up in testNodeDeviceDestroy() here:
out:
if (obj)
virNodeDeviceObjUnlock(obj);
And instead of skipping this, we try to do Unlock and fail because of
malformed mutex.
Change virNodeDeviceObjRemove to use double pointer and set pointer to
NULL.
Validating the vcpu count is more intricate and doing it in the XML
parser will make previously valid configs (with older qemus) vanish.
Now that we have a very similar check in the qemu domain validation
callback we can do it in a more appropriate place.
This basically reverts commit b54de0830a.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370066
Individual vCPU hotplug requires us to track the state of any vCPU. To
allow this add the following XML:
<domain>
...
<vcpu current='2'>3</vcpu>
<vcpus>
<vcpu id='0' enabled='yes' hotpluggable='no' order='1'/>
<vcpu id='1' enabled='yes' hotpluggable='yes' order='2'/>
<vcpu id='1' enabled='no' hotpluggable='yes'/>
</vcpus>
...
The 'enabled' attribute allows to control the state of the vcpu.
'hotpluggable' controls whether given vcpu can be hotplugged and 'order'
allows to specify the order to add the vcpus.
For some unknown reason the original implementation of the <forwarder>
element only took advantage of part of the functionality in the
dnsmasq feature it exposes - it allowed specifying the ip address of a
DNS server which *all* DNS requests would be forwarded to, like this:
<forwarder addr='192.168.123.25'/>
This is a frontend for dnsmasq's "server" option, which also allows
you to specify a domain that must be matched in order for a request to
be forwarded to a particular server. This patch adds support for
specifying the domain. For example:
<forwarder domain='example.com' addr='192.168.1.1'/>
<forwarder domain='www.example.com'/>
<forwarder domain='travesty.org' addr='10.0.0.1'/>
would forward requests for bob.example.com, ftp.example.com and
joe.corp.example.com all to the DNS server at 192.168.1.1, but would
forward requests for travesty.org and www.travesty.org to
10.0.0.1. And due to the second line, requests for www.example.com,
and odd.www.example.com would be resolved by the libvirt network's own
DNS server (i.e. thery wouldn't be immediately forwarded) even though
they also match 'example.com' - the match is given to the entry with
the longest matching domain. DNS requests not matching any of the
entries would be resolved by the libvirt network's own DNS server.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1331796
If you define a libvirt virtual network with one or more IP addresses,
it starts up an instance of dnsmasq. It's always been possible to
avoid dnsmasq's dhcp server (simply don't include a <dhcp> element),
but until now it wasn't possible to avoid having the DNS server
listening; even if the network has no <dns> element, it is started
using default settings.
This patch adds a new attribute to <dns>: enable='yes|no'. For
backward compatibility, it defaults to 'yes', but if you don't want a
DNS server created for the network, you can simply add:
<dns enable='no'/>
to the network configuration, and next time the network is started
there will be no dns server created (if there is dhcp configuration,
dnsmasq will be started with "port=0" which disables the DNS server;
if there is no dhcp configuration, dnsmasq won't be started at all).
The new forward mode 'open' is just like mode='route', except that no
firewall rules are added to assure that any traffic does or doesn't
pass. It is assumed that either they aren't necessary, or they will be
setup outside the scope of libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=846810
Modify virDomainDefGetVcpuSched to emit an error message if
virDomainDefGetVcpu returns NULL meaning the vcpu could not
be found. Prior to commit id '9cc931f0b' the error message
would have been issued in virDomainDefGetVcpu.
When commit id '6dfb4507' refactored where the iothreadsched data was
stored, the error message for when the virDomainIOThreadIDFind failed
to find an iothreadid ("iothreadsched attribute 'iothreads' uses
undefined iothread ids") was lost. This led to the possibility that
someone would try to use it, but receive the generic message "An error
occurred, but the cause is unknown".
This patch adds the error message back so that someone will know that
they have an invalid configuration.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If any of the devices referenced a USB hub that does not exist,
defining the domain would either fail with:
error: An error occurred, but the cause is unknown
(if only the last hub in the path is missing)
or crash.
Return a proper error instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1367130
This event is emitted when a nodedev XML definition is updated,
like when cdrom media is changed in a cdrom block device.
Also includes node device update event implementation for udev
backend, virsh nodedev-event support, and event-test support
More misunderstanding/mistaken assumptions on my part - I had thought
that a pci-expander-bus could be plugged into any legacy PCI slot, and
that pcie-expander-bus could be plugged into any PCIe slot. This isn't
correct - they can both be plugged ontly into their respective root
buses. This patch adds that restriction.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358712
libvirt had allowed a dmi-to-pci-bridge to be plugged in anywhere a
normal PCIe endpoint can be connected, but this is wrong - it will
only work if it's plugged into pcie-root (the PCIe root complex) or a
pcie-expander-bus (the qemu device pxb-pcie). This patch adjusts the
connection flags accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1363648
I apparently misunderstood Marcel's description of what could and
couldn't be plugged into qemu's pxb-pcie controller (known as
pcie-expander-bus in libvirt) - I specifically allowed directly
connecting a pcie-switch-upstream-port, and it turns out that causes
the guest kernel to crash.
This patch forbids such a connection, and updates the xml docs
appropriately.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1361172
The virDomainPCIAddressFlagsCompatible() error logs report that a
device required a controller that accepted standard PCI endpoint
devices, or PCI Express endpoint devices, and if hotplug was required
by the configuration but not provided by the selected controller. But
the wording of the error messages was apparently confusing (according
to the bugzilla report referenced below). On top of that, if the
device was something other than an endpoint device (e.g. a
pcie-switch-downstream-port) the error message was a complete punt -
it would just say that the flags were incorrect.
This patch makes the messages for PCI/PCIe endpoint and hotplug
requirements more clear, and also specifically indicates what was the
device type when it is other than an endpoint device.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1363627
This element will control secure boot implemented by some
firmwares. If the firmware used in <loader/> does support the
feature we must tell it to the underlying hypervisor. However, we
can't know whether loader does support it or not just by looking
at the file. Therefore we have to have an attribute to the
element where users can tell us whether the firmware is secure
boot enabled or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since its release of 2.4.0 qemu is able to enable System
Management Module in the firmware, or disable it. We should
expose this capability in the XML. Unfortunately, there's no good
way to determine whether the binary we are talking to supports
it. I mean, if qemu's run with real machine type, the smm
attribute can be seen in 'qom-list /machine' output. But it's not
there when qemu's run with -M none. Therefore we're stuck with
version based check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While no leak was observed yet, there might be one if
virObjectEventClass is ever derived from another class. Because
in that case plain VIR_FREE() will not call dispose() from parent
classes possibly leaking some memory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
According to libxl implementation, it supports pvusb
controller of version 1.1 and version 2.0, and it
supports two types of backend, 'pvusb' (dom0 backend)
and 'qusb' (qemu backend). But currently pvusb backend
is not checked in yet.
To match libxl support, extend usb controller schema
to support two more models: qusb1 (qusb, version 1.1)
and 'qusb2' (qusb version 2.0).
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Consider the following XML snippet:
<memory model=''>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
</memory>
Whats wrong you ask? The @model attribute. This should result in
an error thrown into users faces during virDomainDefine phase.
Except it doesn't. The XML validation catches this error, but if
users chose to ignore that, they will end up with invalid XML.
Well, they won't be able to start the machine - that's when error
is produced currently. But it would be nice if we could catch the
error like this earlier.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The cur_balloon also increases/decreases with dimm hotplug/unplug.
To be consistent, adjust the value for coldplug too. This was inconsistently
taken care when cur_ballon != memory to begin with. The patch fixes it
irrespective of that.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Nothing in the code path after the removed call has needs/uses the alias
anyway (as would be the case for command line building or talking to monitor).
The alias is VIR_FREE'd in virDomainDeviceInfoClear which is called for any
device that needs/uses an alias via virDomainDeviceDefFree or virDomainDefFree
as well as during virDomainDeviceInfoFree for host devices.
For persistent domains, the domain definition (including aliases) gets
freed a few screens later when it's replaced with newDef.
For transient domains, the definition is freed/unref'd along with the
virDomainObj a few moments later.
The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.
Add a function that calculates the virtio serial address set
from the domain definition.
Credit goes to Cole Robinson.
When parsing a command line with USB devices that have
no address specified, QEMU automatically adds a USB hub
if the device would fill up all the available USB ports.
To help most of the users, add one hub if there are more
USB devices than available ports. For wilder configurations,
expect the user to provide us with more hubs and/or controllers.
Walk through all the usb hubs in the domain definition
that have a USB address specified, create the
corresponding structures in the virDomainUSBAddressSet
and mark the port it occupies as used.
A new type to track USB addresses.
Every <controller type='usb' index='i'/> is represented by an
object of type virDomainUSBAddressHub located at buses[i].
Each of these hubs has up to 'nports' ports.
If a port is occupied, it has the corresponding bit set in
the 'ports' bitmap, e.g. port 1 would have the 0th bit set.
If there is a hub on this port, then hubs[i] will point
to this hub.
When formatting the graphics data for TYPE_SPICE, check if the glisten
is NULL before blindly referencing
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
New type of <devices> <filesystem type= 'volume'> is introduced.
This patch allows to use volumes for storing the filesystem, that is
accessed from the guest e.g. root directory for container.
To take advantage of volumes as a backend of filesystem volume
and pool names should be specified:
<filesystem type= 'volume'>
<source pool='pool name' volume='volume name'/>
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
In preparation to tracking which USB addresses are occupied.
Introduce two helper functions for printing the port path
as a string and appending it to a virBuffer.
We were requiring a USB port path in the schema, but not enforcing it.
Omitting the USB port would lead to libvirt formatting it as (null).
Such domain cannot be started and will disappear after libvirtd restart
(since it cannot parse back the XML).
Only format the port if it has been specified and mark it as optional
in the XML schema.
Playing directly with our live definition, updating it, and reverting it
back once we are done is very nice and it's quite dangerous too. Let's
just make a copy of the domain definition if needed and do all tricks on
the copy.
https://bugzilla.redhat.com/show_bug.cgi?id=1320470
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
MinGW complained that we might be dereferencing a NULL pointer. While
that can't be true, the logic certainly allows for that.
../../src/conf/domain_conf.c: In function 'virDomainDefPostParse':
../../src/conf/domain_conf.c:4224:18: error: potential null pointer dereference [-Werror=null-dereference]
if (!vcpu->online && vcpu->cpumask) {
~~~~^~~~~~~~
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
MinGW complained that we might be dereferencing a NULL pointer. While
that can't be true, the logic certainly allows for that.
src/conf/domain_conf.c: In function 'virDomainDefGetVcpuPinInfoHelper':
src/conf/domain_conf.c:1545:17: error: potential null pointer dereference [-Werror=null-dereference]
if (vcpu->cpumask)
~~~~^~~~~~~~~
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Allow to store driver specific data on a per-vcpu basis.
Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.
Most callers make sure that it's never called with an out of range vCPU.
Every other caller reports a different error explicitly. Drop the error
reporting and clean up some dead code paths.
After 27726d8c21 a privateData is allocated in
virDomainHostdevDefAlloc(). However, the counter part - freeing
them in Free() is missing which leads to the following memory
leak:
==6489== 24 bytes in 1 blocks are definitely lost in loss record 684 of 1,003
==6489== at 0x4C2C070: calloc (vg_replace_malloc.c:623)
==6489== by 0x54B7C94: virAllocVar (viralloc.c:560)
==6489== by 0x5517BE6: virObjectNew (virobject.c:193)
==6489== by 0x1B400121: qemuDomainHostdevPrivateNew (qemu_domain.c:798)
==6489== by 0x5557B24: virDomainHostdevDefAlloc (domain_conf.c:2152)
==6489== by 0x5575578: virDomainHostdevDefParseXML (domain_conf.c:12709)
==6489== by 0x5582292: virDomainDefParseXML (domain_conf.c:16995)
==6489== by 0x5583C98: virDomainDefParseNode (domain_conf.c:17470)
==6489== by 0x5583B07: virDomainDefParse (domain_conf.c:17417)
==6489== by 0x5583B95: virDomainDefParseFile (domain_conf.c:17441)
==6489== by 0x55A3F24: virDomainObjListLoadConfig (virdomainobjlist.c:465)
==6489== by 0x55A43E6: virDomainObjListLoadAllConfigs (virdomainobjlist.c:596)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Libxl is the last user and I don't have the toolchain prepared to
compile the libxl driver. Move it to the libxl driver to avoid having to
refactor the code.
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:
<interface type='ethernet'>
<mac address='00:16:3e:0f:ef:8a'/>
<source>
<ip address='192.168.122.12' family='ipv4'
prefix='24' peer='192.168.122.1'/>
<ip address='192.168.122.13' family='ipv4' prefix='24'/>
<route family='ipv4' address='0.0.0.0'
gateway='192.168.122.1'/>
<route family='ipv4' address='192.168.124.0' prefix='24'
gateway='192.168.124.1'/>
</source>
</interface>
In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types if needed, and 2) we can retain the info
when set to an invalid interface type all the way through to
validation and report a proper error, rather than just ignoring it
(which is currently what happens for many other type-specific
settings).
(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).
(This patch had been pushed earlier in
commit fe6a77898a, but was reverted in
commit d658456530 because it had been
accidentally pushed during the freeze for release 2.0.0)
The peer attribute is used to set the property of the same name in the
interface IP info:
<interface type='ethernet'>
...
<ip family='ipv4' address='192.168.122.5'
prefix='32' peer='192.168.122.6'/>
...
</interface>
Note that this element is used to set the IP information on the
*guest* side interface, not the host side interface - that will be
supported in an upcoming patch.
(This patch now has quite a history: it was originally pushed in
commit 690969af, which was subsequently reverted in commit 1d14b13f,
then reworked and pushed (along with a lot of other related/supporting
patches) in commit 93135abf1; however *that* commit had been
accidentally pushed during dev. freeze for release 2.0.0, so it was
again reverted in commit f6acf039f0).
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: Laine Stump <laine@laine.org>
Add a new secret type known as "passphrase" - it will handle adding the
secret objects that need a passphrase without a specific username.
The format is:
<secret ...>
<uuid>...</uuid>
...
<usage type='passphrase'>
<name>mumblyfratz</name>
</usage>
</secret>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since the virSecretDefParseUsage ensures each of the fields is present,
no need to check during virSecretDefFormatUsage (also virBufferEscapeString
is a no-op with a NULL argument).
Signed-off-by: John Ferlan <jferlan@redhat.com>
A helper that will execute a callback on every USB device
in the domain definition.
With an ability to skip USB hubs, since we will want to treat
them differently in some cases.
virTypedParameterAssign steals the string rather than copying it into
the typed parameter and thus freeing it leads to a crash when attempting
to serialize the results.
This was introduced in commit 9f50f6e2 and later made an universal
helper in 32e6339c.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1351473
Some code paths already assume that it is allocated since it was always
allocated by virDomainPerfDefParseXML. Make it member of virDomainDef
directly so that we don't have to allocate it all the time.
This fixes crash when attempting to connect to an existing process via
virDomainQemuAttach since we would not allocate it in that code path.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1350688
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:
<interface type='ethernet'>
<mac address='00:16:3e:0f:ef:8a'/>
<source>
<ip address='192.168.122.12' family='ipv4'
prefix='24' peer='192.168.122.1'/>
<ip address='192.168.122.13' family='ipv4' prefix='24'/>
<route family='ipv4' address='0.0.0.0'
gateway='192.168.122.1'/>
<route family='ipv4' address='192.168.124.0' prefix='24'
gateway='192.168.124.1'/>
</source>
</interface>
In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types, and 2) we can retain the info when set to
an invalid interface type all the way through to validation and report
a proper error, rather than just ignoring it (which is currently what
happens for many other type-specific settings).
(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).
The peer attribute is used to set the property of the same name in the
interface IP info:
<interface type='ethernet'>
...
<ip family='ipv4' address='192.168.122.5'
prefix='32' peer='192.168.122.6'/>
...
</interface>
Note that this element is used to set the IP information on the
*guest* side interface, not the host side interface - that will be
supported in an upcoming patch.
(This is an updated *re*-commit of commit 690969af, which was
subsequently reverted in commit 1d14b13f).
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: Laine Stump <laine@laine.org>
virDomainNetIPInfoParseXML() and virDomainNetIPInfoFormat() are no
longer "unused", so we can now remove the "ATTRIBUTE_UNUSED" from
their definitions, since virDomainNetIPInfoFormat() is now the only
caller of virDomainNetIPsFormat() and virDomainNetRoutesFormat(),
those two functions can simply be subsumed into
virDomainNetIPInfoFormat().
a.k.a. <hostdev mode='capabilities' type='net'>.
This replaces the existing nips, ips, nroutes, and routes with a
single virNetDevIPInfo, and simplifies the code by calling that
object's parse/format/clear functions instead of open coding.
There are currently two places in the domain where this combination is
used, and there is about to be another. This patch puts them together
for brevity and uniformity.
As with the newly-renamed virNetDevIPAddr and virNetDevIPRoute
objects, the new virNetDevIPInfo object will need to be accessed by a
utility function that calls low level Netlink functions (so we don't
want it to be in the conf directory) and will be called from multiple
hypervisor drivers (so it can't be in any hypervisor directory); the
most appropriate place is thus once again the util directory.
The parse and format functions are in conf/domain_conf.c because only
the domain XML (i.e. *not* the network XML) has this exact combination
of IP addresses plus routes. Note that virDomainNetIPInfoFormat() will
end up being the only caller to virDomainNetRoutesFormat() and
virDomainNetIPsFormat(), so it will just subsume those functions in a
later patch, but we can't do that until they are no longer called.
(It would have been nice to include the interface name within the
virNetDevIPInfo object (with a slight name change), but that can't
be done cleanly, because in each case the interface name is provided
in a different place in the XML relative to the routes and IP
addresses, so putting it in this object would actually make the code
more confused rather than simpler).
These functions all need to be called from a utility function that
must be located in the util directory, so we move them all into
util/virnetdevip.[ch] now that it exists.
Function and struct names were appropriately changed for the new
location, but all code is unchanged aside from motion and renaming.
When support for <interface type='ethernet'> was added in commit
9a4b705f back in 2010, it erroneously looked at <source dev='blah'/>
for a user-specified guest-side interface name. This was never
documented though. (that attribute already existed at the time in the
data.ethernet union member of virDomainNetDef, but apparently had no
practical use - it was only used as a storage place for a NetDef's
bridge name during qemuDomainXMLToNative(), but even then that was
never used for anything).
When support for similar guest-side device naming was added to the lxc
driver several years later, it was put in a new subelement <guest
dev='blah'/>.
In the intervening years, since there was no validation that
ethernet.dev was NULL in the other drivers that didn't actually use
it, innocent souls who were adding other features assuming they needed
to account for non-NULL ethernet.dev when really they didn't, so
little bits of the usual pointless cargo-cult code showed up.
This patch not only switches the openvz driver to use the documented
<guest dev='blah'/> notation for naming the guest-side device (just in
case anyone is still using the openvz driver), and logs an error if
anyone tries to set <source dev='blah'/> for a type='ethernet'
interface, it also removes the cargo-cult uses of ethernet.dev and
<source dev='blah'/>, and eliminates if from the RNG and from
virDomainNetDef.
NB: I decided on this course of action after mentioning the
inconsistency here:
https://www.redhat.com/archives/libvir-list/2016-May/msg02038.html
and getting encouragement do eliminate it in a later IRC discussion
with danpb.
Rearrange this function to be better organized and more correct:
* the error codes were changed from the incorrect INVALID_ARG to
XML_ERROR
* prefix still isn't required, but if present it must be valid or an
error will be logged.
* don't emit a debug log just because prefix is missing - this
is valid.
* group everything related to setting prefix in one place rather than
scattered through the function.
I'm tired of mistyping this all the time, so let's do it the same all
the time (similar to how we changed all "Pci" to "PCI" awhile back).
(NB: I've left alone some things in the esx and vbox drivers because
I'm unable to compile them and they weren't obviously *not* a part of
some API. I also didn't change a couple of variables named,
e.g. "somethingIptables", because they were derived from the name of
the "iptables" command)
These had been declared in conf/device_conf.h, but then used in
util/virnetdev.c, meaning that we had to #include conf/device_conf.h
in virnetdev.c (which we have for a long time said shouldn't be done.
This caused a bigger problem when I tried to #include util/virnetdev.h
in a file in src/conf (which is allowed) - for some reason the
"device_conf.h: File not found" error.
The solution is to move the data types and functions used in util
sources from conf to util. Some names were adjusted during the move
("virInterface" --> "virNetDevIf", and "VIR_INTERFACE" -->
"VIR_NETDEV_IF")
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Disallowing them broke a use case of testing multipath configurations
for storage. Originally this was added as it was impossible to
use certain /dev/disk-by... links but the disks worked properly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1349895
