centralize the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
to avoid unnecessary duplicated definition
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.
The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Similarly to other commands add an argument which allows to check the
XML which would be used to execute the operation instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For given domain fetch list of defined interfaces. This can be
used for commands like domif-getlink and others. If available,
the interface name is returned (e.g. "vnet0", usually available
only for running domains), if not the MAC address is returned.
Moreover, the detach-interface command requires only MAC address
and therefore we have new flag that forces the completer to
return just the MAC address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared let the fun begin. This
completer is very simple and returns domain names. Moreover,
depending on the command it can return just a subset of domains
(e.g. only running/paused/transient/.. ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is literally only a wrapper around virBitmapNewData() and
virBitmapFormat(), only the naming was wrong since it was introduced.
And because we have virBitmap*String functions where the meaning of
the 'String' is constant, this might confuse someone.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The 'set-lifcycle-action' is throwing a weird error after executing it with
the '--help' option. The command output is showing the options 'type' and
'action' are as optional, but they aren't. Both are required.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> [--type <string>] [--action <string>] ...
...
OPTIONS
[--domain] <string> domain name, id or uuid
error: internal error: bad options in command: 'set-lifecycle-action'
After applying this patch, both arguments are required now.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> <type> <action> [--config] ...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509870
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
In some cases there's dangling backward slash at the end of multi
line macros. While technically the code works, it will stop if
some empty lines are removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit fdeac7a05f tried to fix the output
of 'virsh domxml-to-native --help' by switching types around. One of the
changes broke the option parser. VSH_OT_ARGV should be used only for
variable argument count, not to make the help generator look pretty.
The correct option type in this case is VSH_OT_STRING as it's not
mandatory now since it can be substituted by using --domain.
This makes --help for this command look incorrect, but the parser works
as it should.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1494400
The command "info migrate" of qemu outputs the dirty-pages-rate during
migration, but page size is different in different architectures. So
page size should be output to calculate dirty pages in bytes.
Page size is already implemented with commit
030ce1f8612215fcbe9d353dfeaeb2937f8e3f94 in qemu.
Now Implement the counter-part in libvirt.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Requesting an automated switch to a post-copy migration (using
--timeout-postcopy) without actually enabling post-copy migration (using
--postcopy) doesn't really do anything. Let's make this dependency
explicit to avoid unexpected behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1455023
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A variable named 'socket' clashes with the function of the same
name, causing build failures due to warnings on some platforms.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This commit adds the unix socket URL support to 'domdisplay' command.
Before, even if an user was using unix socket to define a spice graphics,
the command 'domdisplay' showed that the settings were not supported. Now,
the command shows the proper URL: spice+unix://foo/bar.sock.
Settings:
<graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1'/>
</graphics>
<graphics type='spice'>
<listen type='socket' socket='/tmp/spice.sock'/>
</graphics>
Before:
virsh # domdisplay --all Windows7
vnc://127.0.0.1:0
After:
virsh # domdisplay --all Windows7
vnc://127.0.0.1:0
spice+unix:///tmp/spice.sock
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1336720
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
While looking to implement a migrate-getmaxdowntime command (coming),
I noticed that the setmaxdowntime is incorrectly looking at its
parameter as a signed longlong. Not sure how that got past gcc, but
here's a simple patch to make the command line parsing and the parameter to
the worker functions all have the correct (unsigned) type.
Signed-off-by: Scott Garfinkle <seg@us.ibm.com>
The command 'domdisplay' is not freeing the domain pointer properly in
cleanup section. See the error below:
virsh # domdisplay WINDOWS7
vnc://127.0.0.1:0
virsh # quit
error: One or more references were leaked after disconnect from the hypervisor
Valgrind report:
==29168== 66 (56 direct, 10 indirect) bytes in 1 blocks are definitely lost in loss record 154 of 239
==29168== at 0x4C2FB55: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==29168== by 0x5505324: virAllocVar (viralloc.c:560)
==29168== by 0x555A61B: virObjectNew (virobject.c:199)
==29168== by 0x561F367: virGetDomain (datatypes.c:284)
==29168== by 0x5680979: get_nonnull_domain (remote_driver.c:8143)
==29168== by 0x5680979: remoteDomainLookupByName (remote_client_bodies.h:3047)
==29168== by 0x5623D9A: virDomainLookupByName (libvirt-domain.c:425)
==29168== by 0x160480: virshLookupDomainInternal (virsh-util.c:59)
==29168== by 0x160547: virshCommandOptDomainBy (virsh-util.c:98)
==29168== by 0x13D3A9: cmdDomDisplay (virsh-domain.c:10963)
==29168== by 0x165680: vshCommandRun (vsh.c:1327)
==29168== by 0x12E320: main (virsh.c:953)
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Resolves a bug in domxml-to-native command option, so that the
following command displays the help information correctly:
'virsh domxml-to-native --help'.
Signed-off-by: Daniel Liu <srwx4096@gmail.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
The option allows someone to run domain-to-native on already existing
domain without the need of supplying their XML. It is basically
wrapper around 'virsh dumpxml | virsh domxml-to-native /dev/stdin'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=835476
Signed-off-by: Daniel Liu <srwx4096@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
virt-install and virt-manager both default to explicitly setting
"io='native'" in the disk "driver" tag. virsh, however, does not and also
does not provide an option to specify that setting at all. As a result,
disks use a different IO mechanism (the default, "threads") when attached
post-setup using virsh. Adding this option allows users to keep disk
performance consistent for disks attached at install, and those attached
afterward.
The parameter is reported by virDomainGetJobStats API and
VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event and it can be used to identify
the operation (migration, snapshot, ...) to which the reported
statistics belong.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainFree has it's quirks (does not like NULL pointers, resets
libvirt errors). Replace it by a virsh helper which will allow us to
centrally fix issues with it.
The syntax-check rule will prohibit new uses of virDomainFree.
Move virshLookupDomainBy, virshCommandOptDomainBy and
virshCommandOptDomainBy to the helper file. Additionally turn the
virshCommandOptDomainBy macro into a function.
==18591== 16 bytes in 1 blocks are definitely lost in loss record 41 of 183
==18591== at 0x4C2B934: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==18591== by 0x54EBB1C: virAllocN (viralloc.c:191)
==18591== by 0x1628CA: _vshMalloc (vsh.c:136)
==18591== by 0x1344C4: virshVcpuPinQuery (virsh-domain.c:6603)
==18591== by 0x1344C4: cmdVcpuPin (virsh-domain.c:6707)
==18591== by 0x1631BF: vshCommandRun (vsh.c:1312)
==18591== by 0x12DBB1: main (virsh.c:961)
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
All options started with underscores, but we switched them to dashes
later on, making the style consistent. The latest addition, however,
did not respect that, so let's change that as well. It is tempting to
just change the name instead of adding alias, especially since nobody
ever used it, which we know thanks to the fact that it didn't work.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Function vshCommandOptStringReq() returns -1 on error and 0 on
success. The code, however, used the 'group_name' variable only if it
returned 1 (never).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When setting perf events, the enabled/disabled perf events are not
listed. Since we know which events were changed it's possible to
print out the values on successful set, such as :
virsh perf Domain --enable instructions --disable cache_misses
instructions : enabled
cache_misses : disabled
Created a helper to print the messages - use the vshPrintExtra to
adhere to the --quiet|-q option being set by some script. This will
cause the get code to print nothing, but will return success/failure.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit v1.3.3-181-gb028e9d7c implmented support for
VIR_MIGRATE_PARAM_PERSIST_XML migration parameter, but forgot to update
virsh.
https://bugzilla.redhat.com/show_bug.cgi?id=835300
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Correcting the error reporting method by using VSH_REQUIRE_OPTION
instead of virReportError
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1349898
Add the duration parameters to the virsh input/output for blkdeviotune
command and describe them in the pod file.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework the repetitive lines to add iotune values into easier to read macros.
One to handle the SCALED values and one to handle the non scaled values.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the VM is offline virsh attempted to at least report the pinning
information for the VM. This would not work properly now that the vcpus
can be sparse. Fix it by getting the vcpu states from the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375920
The fallback code used if virDomainGetVcpusFlags is not supported used
wrong XPath queries and basically did not work at all. Fix them to point
to the <domain> <vcpu> element instead of <vcpus> which was not present
until lately.
For one VM, it could had more than one graphical display.
Such as we coud add both vnc and spice display to a VM.
This patch introduces '--all' for showing all
possible graphical display of a active VM.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For compatibility reasons virDomainSetVcpus needs to add vcpus as non
hotpluggable which means that the users will not be able to unplug it
after the VM has started. Add a flag that will allow to tell the API
that the unpluggable vcpus are okay.
When using
virsh net-event non-existing-net
the error message says that 'either --list or event type is required'
This is misleading as 'virsh net-event $valid-event-type' is not going
to work either. What is expected is 'virsh net-event --event
$valid-event-type'
This commit fixes the string in pool-event, nodedev-event, event, and
net-event.
virVcpuInfo contains the vcpu number that the data refers to. Report
what's returned by the daemon rather than the sequence number as with
sparse vcpu topologies they won't match.
Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.
Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179
The prettified JSON string already contains a newline so don't print
another one. This allows to pipe the json output (in conjunction with
the --quiet option) to files without having to truncate them afterwards.
They can be used to tune auto-convergence algorithm (which is enabled
with VIR_MIGRATE_AUTO_CONVERGE).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Thanks to our smart option parser which automatically assigns positional
parameters the following (previously working) command fails:
virsh migrate test qemu+ssh://1.2.3.4/system tcp://1.2.3.4/
error: invalid argument: Unsupported compression method
'tcp://1.2.3.4/'
We need to make sure new options are added at the end of the list rather
than where they logically belong.
Reported by Brian Rak.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Extend the lxc-enter-namespace command so that it joins the
containers' cgroups before starting new namespaces. This
ensures that the commands run have the normal resource
limits applied
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently if a guest has listen address 0.0.0.0 or [::] and you run
"virsh domdisplay $domain" you always get "spice://localhost:$port".
We want to print better address if someone is connected from a different
computer using "virsh -c qemu+ssh://some.host/system". This patch fixes the
behavior of virsh to print in this case "spice://some.host:$port".
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1332446
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=885380
Use vshCommandOptScaledInt instead of vshCommandOptULongLong so that
values with suffixes can be passed when bytes are being passed along.
Values for the iops parameters still need to be given in the absolute
form as they are not bytes but numbers.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
cmdDetachInterface function checks for live config
flags and then passes the live/config domain xml
to virshDomainDetachInterface accordingly.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
After failing to parse the perf event list, the code would return
failure without freeing the previously acquired object. Rearrange the
code to avoid the problem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329046
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
When using the --start option, the show_count should not be set to
max_id as the --start <cpu> means we dont need those many initial cpu
stats. Hence, show_count should be adjusted accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1249441
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that we have @flags we can support changing perf events just
in active or inactive configuration regardless of the other.
Previously, calling virDomainSetPerfEvents set events in both
active and inactive configuration at once. Even though we allow
users to set perf events that are to be enabled once domain is
started up. The virDomainGetPerfEvents API was flawed too. It
returned just runtime info.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Everywhere else we use a comma separated list. There's no good
reason to make 'perf' command an exception. Currently, it accepts
string list separated by '|'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.
In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Some hypervisors (namely qemu) can have a separate connecton for
non-shared disks migration of active domains. Currently we have
no means to control the port of such a connection. At the same
time we have options to control port of memory migration traffic
(thru migration uri) as well as interfaces that target server
is bound to for incoming migration (thru VIR_MIGRATE_PARAM_LISTEN_ADDRESS).
Let's add the option for setting disks port too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The API docs state that the API queries pinning info for all vCPUs and
thus we should allocate the bitmap even for the inactive ones.
The API will currently return bitmap only for the active vCPUs but that
will change in the future.
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since we have the macro there's no need for us to unwind it by
hand and check for mutually exclusive flags ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than setting flags to -1 if none were specified, move the logic
to use the old API to the place where we need to decide. It simplifies
the logic a bit.
Since the code is changing the source image path by modifying the
existing XML snippet the <backingStore> stays in place.
As <backingStore> is relevant to the <source> part of the image, the
update of that part makes the element invalid.
CD/floppy images usually don't have a backing chain and the element is
currently ignored though but it might start being used in the future so
let's start behaving correctly.
Drop the <backingStore> subtree once we want to update the XML.
Before this patch, you'd get:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<backingStore type="file" index="1">
<format type="qcow2"/>
<source file="/var/lib/libvirt/images/vm.1436949097"/>
<backingStore/>
</backingStore>
<target dev="hdc" bus="ide"/>
...
</disk>
After:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<target dev="hdc" bus="ide"/>
...
</disk>
The macro would eat the first parameter. In some cases the format string
for vshPrint was eaten. In other cases the calls referenced variables
which did not exist in the given context. Avoid errors by doing compile
time checking.
After a block job hits 100%, we only need to apply a timeout waiting for
a block job event if exactly one of the BLOCK_JOB or BLOCK_JOB_2
callbacks were able to be registered.
If neither callback could be registered, there's clearly no need for a
timeout.
If both callbacks were registered, then we're guaranteed to eventually
get one of the events. The path being used by virsh must be exactly the
source path or target device in the domain's disk definition, and these
are the respective strings sent back in these two events.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When waiting for a block job, the various statuses (COMPLETED, READY,
CANCELED, etc.) should all be treated consistently by having the loop be
exited with "break". Use "goto cleanup" for the error cases only, when
no block job status is available.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
There is no need to call virshPrintJobProgress() unless the block job's
cur or end cursors have changed since the last iteration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
After commit 57177f1, the cpu-stats command format change to:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378732785511
vcpu_time is not user friendly. After this patch, it will
change back:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378.732785511 seconds
https://bugzilla.redhat.com/show_bug.cgi?id=1301807
Signed-off-by: Luyao Huang <lhuang@redhat.com>
virDomainGetCPUStats doesn't support flags so there's no need to carry
the 'flags' variable around. Additionally since the API is poorly
designed I doubt that it will be extended.
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
It all works like this. The change-media command dumps domain
XML, finds the corresponding cdrom device we want to change media
in and returns it in the xmlNodePtr form. This way we don't have
to bother with keeping all the subelements or attributes that we
don't care about in the XML that is fed back to libvirt for the
update API.
Now, the problem is we try to be clever here and detect if disk
already has a source (indicated by <source/> subelement).
However, bare fact that the element is there does not mean disk
has source. Make our clever check better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option. Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect current domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect running domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect next boot". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. Note that not all
'{.name = "persistent",' entries are replaced, just those that have the
common .help string of "make live change persistent".
Non replaced instances are unique to the command.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which will be used to pass the translatable
helpstr since not all domain options can take the same string.
The majority of the options take 'N_("domain name, id or uuid")', so
create a separate macro with a _FULL suffix while those that do not
take the same string will use the VIRSH_COMMON_OPT_DOMAIN macro.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Implement a --timestamp option for 'virsh qemu-monitor-event', similar
to the one for 'virsh event'.
When the option is used, the human-readable timestamp will be printed
before the message, and the timing information provided by QEMU will
not be displayed.
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1281710
Commit id '3c7590e0a' added the flag to the rbd backend, but provided
no means via virsh to use the flag. This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.
For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.
Currently only supported for rbd backends.
Instead of the custom error:
error: iothreadpin: invalid cpulist.
use vshCommandOptStringReq and let it report a more specific error:
error: Failed to get option 'cpulist': Option argument is empty
Adding this feature will allow users to easily attach a hostdev network
interface using PCI passthrough.
The interface can be attached using --type=hostdev and PCI address or
as --source. This command also allows you to tell, whether the interface
should be managed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997561
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
