This interface allows you to undefine a persistently defined (but
inactive) mediated devices. It is implemented via 'mdevctl'
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
With mediated devices, we can now define persistent node devices that
can be started and stopped. In order to take advantage of this, we need
an API to define new node devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since a mediated device can be persistently defined by the mdevctl
backend, we need additional lifecycle events beyond CREATED/DELETED to
indicate that e.g. the device has been stopped but the device definition
still exists.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It doesn't make sense to list all of the flag values in the function
documentation. This is unnecessary duplication, we already refer to the
enum type. Also, remove reference to exclusive groups of flags, since
that does not apply to this API.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add two flag values for virConnectListAllNodeDevices() so that we can
list only node devices that are active or inactive.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extend dirtyrate statistics for domGetStats to display the information
of a domain's memory dirty rate produced by domainStartDirtyRateCalc.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce virDomainStartDirtyRateCalc API for start calculation of
a domain's memory dirty rate with a specified time.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This API allows fetching a list of informational messages recorded
against the domain. This provides a way to give information about
tainting of the guest due to undesirable actions/configs, as well
as provide details of deprecated features.
The output of this API is explicitly targetted at humans, not
machines, so it is inappropriate to attempt to pattern match on
the strings and take action off them, not least because the messages
are marked for translation.
Should there be a demand for machine targetted information, this
would have to be addressed via a new API, and is not planned at
this point in time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since Hyper-V allows multiple VMs to be created with the same name,
some commands produce unpredictable results due to
hypervDomainLookupByName's WMI query selecting the wrong domain.
For example, this prevents `virsh dumpxml` from outputting XML for the
wrong domain.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support to filter by 'ap_matrix' capability.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support to filter by 'ap_card' and 'ap_queue' capabilities.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
When introducing the API I've mistakenly used 'int' type for
@nkeys argument which does nothing more than tells the API how
many items there are in @keys array. Obviously, negative values
are not expected and therefore 'unsigned int' should have been
used.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When setting up a new guest or when a management software wants
to allow access to an existing guest the
virDomainSetUserPassword() API can be used, but that might be not
good enough if user want to ssh into the guest. Not only sshd has
to be configured to accept password authentication (which is
usually not the case for root), user have to type in their
password. Using SSH keys is more convenient. Therefore, two new
APIs are introduced:
virDomainAuthorizedSSHKeysGet() which lists authorized keys for
given user, and
virDomainAuthorizedSSHKeysSet() which modifies the authorized
keys file for given user (append, set or remove keys from the
file).
It's worth nothing that while authorized_keys file entries have
some structure (as defined by sshd(8)), expressing that structure
goes beyond libvirt's focus and thus "keys" are nothing but an
opaque string to libvirt.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The enum constant names should all have a prefix that matches the enum
name. VIR_DOMAIN_CHECKPOINT_REDEFINE_VALIDATE was missing the "CREATE_"
part of the name prefix.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a flag which will allow users to perform hypervisor-specific
validation when redefining the checkpoint metadata. This will allow
checking metadata which is stored e.g. in disk images when populating
the libvirt metadata.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This code will be used to signal cases when the checkpoint is broken
either during backup or other operations where a user might want to make
decision based on the presence of the checkpoint, such as do a full
backup instead of an incremental one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current udev node device driver ignores all events related to vdpa
devices. Since libvirt now supports vDPA network devices, include these
devices in the device list.
Example output:
virsh # nodedev-list
[...ommitted long list of nodedevs...]
vdpa_vdpa0
virsh # nodedev-dumpxml vdpa_vdpa0
<device>
<name>vdpa_vdpa0</name>
<path>/sys/devices/vdpa0</path>
<parent>computer</parent>
<driver>
<name>vhost_vdpa</name>
</driver>
<capability type='vdpa'>
<chardev>/dev/vhost-vdpa-0</chardev>
</capability>
</device>
NOTE: normally the 'parent' would be a PCI device instead of 'computer',
but this example output is from the vdpa_sim kernel module, so it
doesn't have a normal parent device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Introduce memory failure event. Libvirt should monitor domain's
event, then posts it to uplayer. According to the hardware memory
corrupted message, a cloud scheduler could migrate domain to another
health physical server.
Several changes in this patch:
public API:
include/*
src/conf/*
src/remote/*
src/remote_protocol-structs
client:
examples/c/misc/event-test.c
tools/virsh-domain.c
With this patch, each driver could implement its own method to run
this new event.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This adds a new value to virConnectCompareCPUFlags,
"VIR_CONNECT_CPU_VALIDATE_XML", that governs XML document validation in
virCPUDefParseXML.
In src/conf/cpu_conf.c, include configmake.h for PKGDATADIR and
virfile.h for virFileFindResource.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Allow to filter for CSS devices.
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Adds new typed param for migration and uses this as a UNIX socket path that
should be used for the NBD part of migration. And also adds virsh support.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch takes care of just the obvious cases: there are
many more situations where the data we pass to configure_file()
could likely be obtained in a more effective way, but we can
address the low-hanging fruits as a first approximation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The term number is used for other stats and even for hugetlb
stats in virsh man page. The term number is also more clear.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases it's useful to report the error which caused the domain
job to fail. Add an optional field for holding the error message so that
it can be later retrieved from statistics of a completed job.
Add the field name macro and code for extracting it in virsh.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The server needs to use CA certificate, CRL, server certificate/key to
complete the TLS handshake. If these files change, we needed to restart
libvirtd for them to take effect. This API can update the TLS context
*ONLINE* without restarting libvirtd.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wu Qingliang <wuqingliang4@huawei.com>
Pvpanic device supports bit 1 as crashloaded event, it means that
guest actually panicked and run kexec to handle error by guest side.
Handle crashloaded as a lifecyle event in libvirt.
Test case:
Guest side:
before testing, we need make sure kdump is enabled,
1, build new pvpanic driver (with commit from upstream
e0b9a42735f2672ca2764cfbea6e55a81098d5ba
191941692a3d1b6a9614502b279be062926b70f5)
2, insmod new kmod
3, enable crash_kexec_post_notifiers,
# echo 1 > /sys/module/kernel/parameters/crash_kexec_post_notifiers
4, trigger kernel panic
# echo 1 > /proc/sys/kernel/sysrq
# echo c > /proc/sysrq-trigger
Host side:
1, build new qemu with pvpanic patches (with commit from upstream
600d7b47e8f5085919fd1d1157f25950ea8dbc11
7dc58deea79a343ac3adc5cadb97215086054c86)
2, build libvirt with this patch
3, handle lifecycle event and trigger guest side panic
# virsh event stretch --event lifecycle
event 'lifecycle' for domain stretch: Crashed Crashloaded
events received: 1
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
There is a lots of possibilities to retrieve hostname information
from domain. Libvirt could use lease information from dnsmasq to
get current hostname too. QEMU supports QEMU-agent but it can use
lease source.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When using GNULIB with Winsock, libvirt will never see the normal HANDLE
objects, instead GNULIB guarantees that libvirt gets a C runtime file
descriptor. The GNULIB poll impl also expects to get C runtime file
descriptors rather than HANDLE objects. Document this behaviour so that
it is clear to applications providing event loop implementations if they
need Windows portability.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.
This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html
Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
A backup job may consist of many backup sub-blockjobs. Add the new
blockjob type and add all type converter strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce VIR_DOMAIN_JOB_OPERATION_BACKUP into virDomainJobOperation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a few new public APIs related to incremental backups. This
builds on the previous notion of a checkpoint (without an existing
checkpoint, the new API is a full backup, differing from
virDomainBlockCopy in the point of time chosen and in operation on
multiple disks at once); and also allows creation of a new checkpoint
at the same time as starting the backup (after all, an incremental
backup is only useful if it covers the state since the previous
backup).
A backup job also affects filtering a listing of domains, as well as
adding event reporting for signaling when a push model backup
completes (where the hypervisor creates the backup); note that the
pull model does not have an event (starting the backup lets a third
party access the data, and only the third party knows when it is
finished).
The full list of new APIs:
virDomainBackupBegin;
virDomainBackupGetXMLDesc;
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A pull mode backup job uses temporary disk images to hold the changed
parts of the disk while the client is copying the changes. Since usage
of the temporary space can be monitored but doesn't really fit any of
the existing stats fields introduce new fields for reporting this data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Normally the TLS certificate from the destination host must match the
host's name for TLS verification to succeed. When the certificate does
not match the destination hostname and the expected cetificate's
hostname is known, this parameter can be used to pass this expected
hostname when starting the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The statistics fields are used in two places:
1) virDomainGetJobStats where the job type which ultimately holds
whether the job was successful or not is returned via a different
argument.
2) The virConnectDomainEventJobCompleted event where we report just the
statistics via typed parameters.
Since it might be useful to report the event also for jobs which
completed unsuccessfully and we don't have the means to transport the
state via a different variable with the event let's add a new field
which will hold the success state.
Since this is meant primarily for completed jobs a plain boolean is
sufficient to convey whether the job was successful or not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
virDomainGetJobStats destroys the completed statistics on the first
read. Give the user possibility to keep them around if they wish so.
Add a flag VIR_DOMAIN_JOB_STATS_KEEP_COMPLETED which will read the stats
without destroying them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In order to implement devices controller with cgroup v2 we need to
add support for BPF programs, cgroup v2 doesn't have devices controller.
This introduces required helpers wrapping linux syscalls.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.
This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.
One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').
Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds, this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When using the fine grained access control mechanism for APIs, when a
client connects to libvirtd, the latter will fetch the uid, gid, selinux
info of the remote client on the UNIX domain socket. This is then used
as the identity when checking ACLs.
With the new split daemons things are a bit more complicated. The user
can connect to virtproxyd, which in turn connects to virtqemud. When
virtqemud requests the identity over the UNIX domain socket, it will
get the identity that virtproxyd is running as, not the identity of
the real end user/application.
virproxyd knows what the real identity is, and needs to be able to
forward this information to virtqemud. The virConnectSetIdentity API
provides a mechanism for doing this. Obviously virtqemud should not
accept such identity overrides from any client, it must only honour it
from a trusted client, aka one running as the same uid/gid as itself.
The typed parameters exposed in the API are the same as those currently
supported by the internal virIdentity class, with a few small name
changes.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This API is intended to aggregate several guest agent information
queries and is ispired by stats API virDomainListGetStats(). It is
anticipated that this information will be provided by a guest agent
running within the domain.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a bunch of new public APIs related to backup checkpoints.
Checkpoints are modeled heavily after virDomainSnapshotPtr (both
represent a point in time of the guest), although a snapshot exists
with the intent of rolling back to that state, while a checkpoint
exists to make it possible to create an incremental backup at a later
time. We may have a future hypervisor that can completely manage
checkpoints without libvirt metadata, but the first two planned
hypervisors (qemu and test) both always use libvirt for tracking
metadata relations between checkpoints, so for now, I've deferred
the counterpart of virDomainSnapshotHasMetadata for a separate
API addition at a later date if there is ever a need for it.
Note that until we allow snapshots and checkpoints to exist
simultaneously on the same domain (although the actual prevention of
this will be in a separate patch for the sake of an easier revert down
the road), that it is not possible to branch out to create more than
one checkpoint child to a given parent, although it may become
possible later when we revert to a snapshot that coincides with a
checkpoint. This also means that for now, the decision of which
checkpoint becomes the parent of a newly created one is the only
checkpoint with no child (so while there are APIs for dealing with a
current snapshot, we do not need those for checkpoints). We may end
up exposing a notion of a current checkpoint later, but it's easier to
add stuff when proven needed than to blindly support it now and wish
we hadn't exposed it.
The following map shows the API relations to snapshots, with new APIs
on the right:
Operate on a domain object to create/redefine a child:
virDomainSnapshotCreateXML virDomainCheckpointCreateXML
Operate on a child object for lifetime management:
virDomainSnapshotDelete virDomainCheckpointDelete
virDomainSnapshotFree virDomainCheckpointFree
virDomainSnapshotRef virDomainCheckpointRef
Operate on a child object to learn more about it:
virDomainSnapshotGetXMLDesc virDomainCheckpointGetXMLDesc
virDomainSnapshotGetConnect virDomainCheckpointGetConnect
virDomainSnapshotGetDomain virDomainCheckpointGetDomain
virDomainSnapshotGetName virDomainCheckpiontGetName
virDomainSnapshotGetParent virDomainCheckpiontGetParent
virDomainSnapshotHasMetadata (deferred for later)
virDomainSnapshotIsCurrent (no counterpart, see note above)
Operate on a domain object to list all children:
virDomainSnapshotNum (no counterparts, these are the old
virDomainSnapshotListNames racy interfaces)
virDomainSnapshotListAllSnapshots virDomainListAllCheckpoints
Operate on a child object to list descendents:
virDomainSnapshotNumChildren (no counterparts, these are the old
virDomainSnapshotListChildrenNames racy interfaces)
virDomainSnapshotListAllChildren virDomainCheckpointListAllChildren
Operate on a domain to locate a particular child:
virDomainSnapshotLookupByName virDomainCheckpointLookupByName
virDomainSnapshotCurrent (no counterpart, see note above)
virDomainHasCurrentSnapshot (no counterpart, old racy interface)
Operate on a snapshot to roll back to earlier state:
virDomainSnapshotRevert (no counterpart, instead checkpoints
are used in incremental backups via
XML to virDomainBackupBegin)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Run 'swtpm socket --print-capabilities' and
'swtpm_setup --print-capabilities' to get the JSON object of the
features the programs are supporting and parse them into a bitmap.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for usage type vTPM to secret.
Extend the schema for the Secret to support the vTPM usage type
and add a test case for parsing the Secret with usage type vTPM.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add pool list type flag VIR_CONNECT_LIST_STORAGE_POOLS_ISCSI_DIRECT,
which was forgotten when introducing iscsi-direct pool at f0bf1be3.
https://bugzilla.redhat.com/show_bug.cgi?id=1726609
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We've been doing a terrible job of performing XML validation in our
various API that parse XML with a corresponding schema (we started
with domains back in commit dd69a14f, v1.2.12, but didn't catch all
domain-related APIs, didn't document the use of the flag, and didn't
cover other XML). New APIs (like checkpoints) should do the validation
unconditionally, but it doesn't hurt to continue retrofitting existing
APIs to at least allow the option.
While there are many APIs that could be improved, this patch focuses
on wiring up a new snapshot XML creation flag through all the
hypervisors that support snapshots, as well as exposing it in 'virsh
snapshot-create'. For 'virsh snapshot-create-as', we blindly set the
flag without a command-line option, since the XML we create from the
command line should generally always comply (note that validation
might cause failures where it used to succeed, such as if we tighten
the RNG to reject a name of '../\n'); but blindly passing the flag
means we also have to add in fallback code to disable validation if
the server is too old to understand the flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This reverts commit 226094fbc4.
A deprecation is a warning to something that use of a feature is
being discouraged. By definition it is not an error condition to
continue to use a deprecated feature.
A VIR_ERR_DEPRECATED constant thus makes no conceptual sense. For
features which are entirely absent we already document that the
VIR_ERR_NO_SUPPORT code will be used. There is no need to distinguish
between a feature which never existed and a feature which previously
existed and was since removed.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow a simple programatic check that a given feature is no longer
supported by introducing a separate error code for this scenario.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Normal practice is to provide a Ref API for all objects, but this was
forgotten for the virNetworkPortPtr object.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a new virNetworPort object that will present an attachment to
a virtual network from a VM.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Qemu added reporting of virtio balloon new statistics stat-htlb-pgalloc and
stat-htlb-pgfail since qemu-3.0 commit b7b12644297. The value of
stat-htlb-pgalloc represents the number of successful hugetlb page allocations
while stat-htlb-pgfail represents the number of failed ones. Add this
statistics reporting to libvirt.
To enable this feature for vm, guest kenel >= 4.17 is required because
the exporting hugetlb page allocation for virtio balloon is introduced
since 6c64fe7f.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds a new VIR_MIGRATE_PARALLEL flag for migration APIs which
will ask the hypervisor to use multiple parallel connections for
migrating a domain. The number of parallel connections can be set using
VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS typed parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Prepare for introducing a bunch of new public APIs related to
backup checkpoints by first introducing a new internal type
and errors associated with that type. Checkpoints are modeled
heavily after virDomainSnapshotPtr (both represent a point in
time of the guest), although a snapshot exists with the intent
of rolling back to that state, while a checkpoint exists to
make it possible to create an incremental backup at a later
time.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using virDomainSnapshotCreateXML with the REDEFINE flag on
multiple snapshot metadata XML descriptions, we require that a child
cannot be redefined before its parent. Since libvirt already tracks a
DAG, it is more convenient if we can ensure that
virDomainListAllSnapshots() and friends have a way to return data in
an order that we can directly reuse, rather than having to
post-process the data ourselves to reconstruct the DAG.
Add VIR_DOMAIN_SNAPSHOT_LIST_TOPOLOGICAL as our new guarantee (well, a
guarantee at the time of the API call conclusion; there's always a
possible TOCTTOU race where someone redefining snapshots in between
the API results and the client actually using the list might render
the list out-of-date). Four listing APIs are directly benefitted by
the new flag; additionally, since we document that the older racy
ListNames interfaces should be sized by using the same flags on their
Num counterparts, the Num interfaces must document when they accept
(and ignore) the flag.
We could have supported the new flag just for the ListAll APIs (to
discourage people from using the older racy Num/ListNames APIs), but
it feels weird to special-case this flag value as being applicable to
only a subset of the API while all other List-related flags are
trivially applicable to all 6.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the API to expose the storage pool capabilities along
with all the remote munglement required to hook up the client.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patches plan to introduce virDomainCheckpointPtr as a new
object for use in incremental backups, along with documentation on
how incremental backups differ from snapshots. But first, we need
to rename any existing mention of a 'system checkpoint' to instead
be a 'full system snapshot', so that we aren't overloading
the term checkpoint.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit f609cb85 (0.9.5) introduced virDomainSnapshotGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the snapshot documentation to declare it as invalid.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; esx and vbox don't support flags;
qemu, test, and vz only support VIR_DOMAIN_XML_SECURE), and it is
unlikely that the domain state saved off during a snapshot creation
needs to be migration-friendly (as the snapshot is not the source of
a migration), it is easier to just define an explicit set of supported
flags directly related to the snapshot API rather than trying to
borrow from domain API, and risking confusion if even more domain
flags are added later (in fact, I have an upcoming patch that plans to
add a new flag to virDomainGetXMLDesc that makes no sense for
snapshots).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit d2a929d4 (0.9.4) defined virDomainSaveImageGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the save image documentation to declare it as invalid.
Later, commit a67e3872 (3.7.0) blindly copied and pasted the same text
into virDomainManagedSaveGetXMLDesc.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; and qemu is the only supporting
driver for either API, with support for just VIR_DOMAIN_XML_SECURE),
it is easier to just define an explicit set of supported flags
directly related to the save image API rather than trying to borrow
from live domain API, and risking confusion if even more domain flags
are added later (in fact, I have an upcoming patch that plans to add
a new flag to virDomainGetXMLDesc that makes no sense for saved
images). We may someday decide that saved images need to support the
_MIGRATABLE flag, as it is possible to load a saved image with a
different version of libvirt than the one that created it, but that
can be a separate patch if it is ever needed. Meanwhile, it DOES make
sense to reuse the same flags for SaveImage and for ManagedSave (since
ManagedSave is really just sugar for creating a normal SaveImage in a
location controlled by libvirt instead of by the user).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the old reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch adds a new VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY typed
parameter for virDomainMigrate3 and virDomainMigrateToURI3 for setting
maximum post-copy migration bandwidth.
In case the initial VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY value turns out
to be suboptimal a new VIR_DOMAIN_MIGRATE_MAX_SPEED_POSTCOPY flag for
virDomainMigrateSetMaxSpeed and virDomainMigrateGetMaxSpeed may be used
to set/get the maximum post-copy migration bandwidth while migration is
already running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for adding several other firewalld-specific functions,
separate the code that's unique to firewalld from the more-generic
"firewall" file.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Mixing documentation strings trailing the enum value and preceeding the
enum value ends in a big mixup. Fix docs string for
VIR_DOMAIN_BLOCK_JOB_TYPE_UNKNOWN so that it's not squished together
with the next one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We do have one for the error domain but not for the error number itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Create a new API that will allow an adjustment of IOThread
polling parameters for the specified IOThread. These parameters
will not be saved in the guest XML. Currently the only parameters
supported will allow the hypervisor to adjust the parameters used
to limit and alter the scope of the polling interval. The polling
interval allows the IOThread to spend more or less time processing
in the guest.
Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
to add virDomainAddIOThreadParams and virDomainModIOThreadParams.
Modification of those changes to use virDomainSetIOThreadParams
instead and remove concepts related to saving the data in guest
XML as well as the way to specifically enable the polling parameters.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Process the IOThreads polling stats if available. Generate the
output params record to be returned to the caller with the three
values - poll-max-ns, poll-grow, and poll-shrink.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces a new shutdown reason "daemon" in order
to indicate that the daemon needed to force shutdown the domain
as the best course of action to take at the moment.
This action would occur during reconnection when processing
encounters an error once the monitor reconnection is successful.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU commit bf1e7140e adds reporting of new balloon statistic to QEMU
2.12. Value represents the amount of memory that can be quickly
reclaimed without additional I/O. Let's add that too.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When the daemons are split there will need to be a way for the virt
drivers and/or network driver to create and delete bindings between
network ports and network filters. This defines a set of public APIs
that are suitable for managing this facility.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Give some more details on what a snapshot is good for, to make
it easier to distinguish from the role of upcoming additions for
incremental backups.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1552092
If there's a long running job it might cause us to wait 30
seconds before we give up acquiring the job. This is problematic
to interactive applications that fetch stats repeatedly every few
seconds.
The solution is to introduce
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag which tries to
acquire job but does not wait if acquiring failed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The API can be used outside the libvirt to get the launch security
information. When SEV is enabled, the API can be used to get the
measurement of the launch process.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The API can be used by application to retrieve the Platform Diffie-Hellman
Key and Platform Certificate chain.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Many places in the code call virGetLastError() just to check the
raised error code, or domain. However virGetLastError() can return
NULL, so the code has to check for that first. This patch therefore
introduces virGetLasError{Code,Domain} functions which always return a
valid error code or domain respectively, thus dropping the need to
perform any checks on the error object.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The new API computes the most feature-rich CPU which is compatible with
all given CPUs and can be provided by the specified hypervisor. It is a
more useful version of virConnectBaselineCPU, which doesn't consider any
hypervisor capabilities when computing the best CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This new API compares the given CPU description with the CPU the
specified hypervisor is able to provide on the host. It is a more useful
version of virConnectCompareCPU, which compares the CPU definition with
the host CPU without considering any specific hypervisor and its
abilities.
https://bugzilla.redhat.com/show_bug.cgi?id=1559832https://bugzilla.redhat.com/show_bug.cgi?id=1559835
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
When detaching a device it can be uniquely identified by its
alias. Instead of misusing virDomainDetachDeviceFlags which has
the same signature introduce new function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
introduce VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_ARP to get ip address
of VM from the message of netlink RTM_GETNEIGH
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The storagePoolLookupByTargetPath() method in the storage driver is used
by the QEMU driver during block migration. If there's a valid use case
for this in the QEMU driver, then external apps likely have similar
needs. Exposing it in the public API removes the direct dependancy from
the QEMU driver to the storage driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add new error code to be able to allow consumers (such as Nova) to be
able to key of a specific error code rather than needing to search the
error message."
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since commit 5e5019bf, we've no longer use
VIR_ERR_AGENT_UNSYNCED anymore.
Mark it as DEPRECATED.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So we have a syntax-check rule to catch all tab indents but it naturally
can't catch tab spacing, i.e. as a delimiter. This patch is a result of
running 'vim -en +retab +wq'
(using tabstop=8 softtabstop=4 shiftwidth=4 expandtab) on each file from
a list generated by the following:
find . -regextype gnu-awk \
-regex ".*\.(rng|syms|html|s?[ch]|py|pl|php(\.code)?)(\.in)?" \
| xargs git grep -lP "\t"
Signed-off-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The command "info migrate" of qemu outputs the dirty-pages-rate during
migration, but page size is different in different architectures. So
page size should be output to calculate dirty pages in bytes.
Page size is already implemented with commit
030ce1f8612215fcbe9d353dfeaeb2937f8e3f94 in qemu.
Now Implement the counter-part in libvirt.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This commit adds new events for two methods and operations: *PoolBuild() and
*PoolDelete(). Using the event-test and the commands set below we have the
following outputs:
$ sudo ./event-test
Registering event callbacks
myStoragePoolEventCallback EVENT: Storage pool test Defined 0
myStoragePoolEventCallback EVENT: Storage pool test Created 0
myStoragePoolEventCallback EVENT: Storage pool test Started 0
myStoragePoolEventCallback EVENT: Storage pool test Stopped 0
myStoragePoolEventCallback EVENT: Storage pool test Deleted 0
myStoragePoolEventCallback EVENT: Storage pool test Undefined 0
Another terminal:
$ sudo virsh pool-define test.xml
Pool test defined from test.xml
$ sudo virsh pool-build test
Pool test built
$ sudo virsh pool-start test
Pool test started
$ sudo virsh pool-destroy test
Pool test destroyed
$ sudo virsh pool-delete test
Pool test deleted
$ sudo virsh pool-undefine test
Pool test has been undefined
This commits can be a solution for RHBZ #1475227.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1475227
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Similar to domainSaveImageDefineXML this commit adds domainManagedSaveDefineXML
API which allows to edit domain's managed save state xml configuration.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Similar to domainSaveImageGetXMLDesc this commit adds domainManagedSaveGetXMLDesc
API which allows to get the xml of managed save state domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
It doesn't access anything from conf/ and ti will be needed to use
from other util/ places. This split makes the separation clearer.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are only two acceptable places for describing enum values.
It's either:
typedef enum {
/* Some long description. Therefore it's placed before
* the value. */
VIR_ENUM_A_VAL = 1,
} virEnumA;
or:
typedef enum {
VIR_ENUM_B_VAL = 1, /* Some short description */
} virEnumB;
However, during review of a patch sent upstream I realized that
is not always the case. I went through all the public header
files and identified all the offenders. Luckily there were just
two of them.
Yes, this makes our HTML generated documentation broken, but
that's bug of the generator. Our header files shouldn't be forced
to use something we don't want to.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Actually we use virConnectNodeDeviceEventGenericCallback.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
All of these four functions (virStreamRecvAll, virStreamSendAll,
virStreamSparseRecvAll, virStreamSparseSendAll) take one or more
callback functions that handle various aspects of streams.
However, if any of them fails no error is reported therefore
caller does not know what went wrong.
At the same time, we silently presumed callbacks to set errno on
failure. With this change we should document it explicitly as the
error is not properly reported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Allow starting the block-copy job for a persistent domain if a user
declares by using a flag that the job will not be recovered if the VM is
switched off while the job is active.
This allows to use the block-copy job with persistent VMs under the same
conditions as would apply to transient domains.
Now that the node_device driver is aware of CCW devices, let's hook up
virsh so that we can filter them properly.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The reason for introducing two capabilities, one for the device itself
(cap 'mdev') and one for the parent device listing the available types
('mdev_types'), is that we should be able to do
'virsh nodedev-list --cap' not only for existing mdev devices but also
for devices that support creation of mdev devices, since one day libvirt
might be actually able to create the mdev devices in an automated way
(just like we do for NPIV/vHBA).
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
These flags to APIs will tell if caller wants to use sparse
stream for storage transfer. At the same time, it's safe to
enable them in storage driver frontend and rely on our backends
checking the flags. This way we can enable specific flags only on
some specific backends, e.g. enable
VIR_STORAGE_VOL_DOWNLOAD_SPARSE_STREAM for filesystem backend but
not iSCSI backend.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is just a wrapper over new function that have been just
introduced: virStreamSendHole() . It's very similar to
virStreamSendAll() except it handles sparse streams well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is just a wrapper over new functions that have been just
introduced: virStreamRecvFlags(), virStreamRecvHole(). It's very
similar to virStreamRecvAll() except it handles sparse streams
well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new flag to virStreamRecvFlags in order to handle being able to
stop reading from the stream so that the consumer can generate a "hole"
in stream target. Generation of a hole replaces the need to receive and
handle a sequence of zero bytes for sparse stream targets.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function is basically a counterpart for virStreamSendHole().
If one side of a stream called virStreamSendHole() the other
should call virStreamRecvHole() to get the size of the hole.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API is used to tell the other side of the stream to skip
some bytes in the stream. This can be used to create a sparse
file on the receiving side of a stream.
It takes @length argument, which says how big the hole is. This
skipping is done from the current point of stream. Since our
streams are not rewindable like regular files, we don't need
@whence argument like seek(2) has.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch is adding the virStreamRecvFlags as a variant to the
virStreamRecv function in order to allow for future expansion of
functionality for processing sparse streams using a @flags
argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The parameter is reported by virDomainGetJobStats API and
VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event and it can be used to identify
the operation (migration, snapshot, ...) to which the reported
statistics belong.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
Similarly to domainSetGuestVcpus this commit adds API which allows to
modify state of individual vcpus rather than just setting the count.
This allows to enable CPUs in specific guest NUMA nodes to achieve any
necessary configuration.
After 7f1bdec5fa our nodedev driver is capable of
determining DRM devices (DRM stands for Direct Render Manager not
Digital rights management). There is still one bit missing
though: virConnectListAllNodeDevices() is capable of listing
either all devices or just those with specified capability. Well,
DRM capability is missing there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1332019
This function will essentially be a wrapper to virStorageVolInfo in order
to provide a mechanism to have the "physical" size of the volume returned
instead of the "allocation" size. This will provide similar capabilities to
the virDomainBlockInfo which can return both allocation and physical of a
domain storage volume.
NB: Since we're reusing the _virStorageVolInfo and not creating a new
_virStorageVolInfoFlags structure, we'll need to generate the rpc APIs
remoteStorageVolGetInfoFlags and remoteDispatchStorageVolGetInfoFlags
(although both were originally created from gendispatch.pl and then
just copied into daemon/remote.c and src/remote/remote_driver.c).
The new API will allow the usage of a VIR_STORAGE_VOL_GET_PHYSICAL flag
and will make the decision to return the physical or allocation value
into the allocation field.
In order to get that physical value, virStorageBackendUpdateVolTargetInfoFD
adds logic to fill in physical value matching logic in qemuStorageLimitsRefresh
used by virDomainBlockInfo when the domain is inactive.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Enable libvirt users to modify daemon's logging output settings from outside.
If either an empty string or NULL is passed, a default logging output will be
used the same way as it would be in case writing an empty string to the
libvirtd.conf
Signed-off-by: Erik Skultety <eskultet@redhat.com>
With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
