To keep all cookie handling (parsing and formatting) in the same
function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Refactors qemuMigrationDstFinish by moving some parts to a dedicated
function for easier introduction of postcopy resume code without
duplicating common parts of the Finish phase. The goal is to have the
following call graph:
- qemuMigrationDstFinish
- qemuMigrationDstFinishOffline
- qemuMigrationDstFinishActive
- qemuMigrationDstFinishFresh
- qemuMigrationDstFinishResume
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Refactors qemuMigrationDstFinish by moving some parts to a dedicated
function for easier introduction of postcopy resume code without
duplicating common parts of the Finish phase. The goal is to have the
following call graph:
- qemuMigrationDstFinish
- qemuMigrationDstFinishOffline
- qemuMigrationDstFinishActive
- qemuMigrationDstFinishFresh
- qemuMigrationDstFinishResume
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We want to prevent our error path that can potentially kill the domain
on the destination host from overwriting an error reported earlier, but
we were only doing so in one specific path when starting vCPUs fails.
Let's do it in all paths.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The comment about QEMU < 0.10.6 has been irrelevant for years.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By separating it into a dedicated qemuMigrationDstComplete function
which can be later called in other places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The final part of Finish phase will be refactored into a dedicated
function and we don't want to generate the cookie there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Let's call it "error" so that it's clear the label is only used in
failure path.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Most of the code in "endjob" label is executed only on failure. Let's
duplicate the rest so that the label can be used only in error path
making the success path easier to follow and refactor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Code executed only when dom != NULL can be moved before "endjob" label,
to the only place where dom is set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We don't need the object until we get to the "endjob" label.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When connection breaks during post-copy migration, QEMU enters
'postcopy-paused' state. We need to handle this state and make the
situation visible to upper layers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Even though a migration is paused, we still want to see the amount of
data transferred so far and that the migration is indeed not progressing
any further.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Migration is a job which takes some time and if it succeeds, there's
nothing to call another migration on. If a migration fails, it might
make sense to rerun it with different arguments, but this would only be
done once the first migration fails rather than while it is still
running.
If this was not enough, the migration job now stays active even if
post-copy migration fails and anyone possibly retrying the migration
would be waiting for the job timeout just to get a suboptimal error
message.
So let's special case getting a migration job when another one is
already active.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Jobs that are supposed to remain active even when libvirt daemon
restarts were reported as started at the time the daemon was restarted.
This is not very helpful, we should restore the original timestamp.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since we keep the migration job active when post-copy migration fails,
we need to restore it when reconnecting to running domains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When migration fails after it already switched to post-copy phase on the
source, but early enough that we haven't called Finish on the
destination yet, we know the vCPUs were not started on the destination
and the source host still has a complete state of the domain. Thus we
can just ignore the fact post-copy phase started and normally abort the
migration and resume vCPUs on the source.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When post-copy migration fails, we can't just abort the migration and
resume the domain on the source host as it is already running on the
destination host and no host has a complete state of the domain memory.
Instead of the current approach of just marking the domain on both ends
as paused/running with a post-copy failed sub state, we will keep the
migration job active (even though the migration API will return failure)
so that the state is more visible and we can better control what APIs
can be called on the domains and even allow for resuming the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The code for setting up a previously active backup job in
qemuProcessRecoverJob is generalized into a dedicated function so that
it can be later reused in other places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It is used for saving job out of domain object. Just like
virErrorPreserveLast is used for errors. Let's make the naming
consistent as Restore would suggest different semantics.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function can be used as a callback for qemuDomainCleanupAdd to
automatically clean up a migration job when a domain is destroyed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function never returns anything but zero.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The events would normally be triggered only if we're changing domain
state. But most of the time the domain is already in the right state and
we're just changing its substate from {PAUSED,RUNNING}_POSTCOPY to
*_POSTCOPY_FAILED. Let's emit lifecycle events explicitly when post-copy
migration fails to make the failure visible without polling.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There's no need to artificially pause a domain when post-copy fails
from our point of view unless QEMU connection is broken too as migration
may still be progressing well.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This new "post-copy failed" reason for the running state will be used on
the destination host when post-copy migration fails while the domain is
already running there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Notable changes:
- Icelake-Client cpu model family removed:
"Icelake-Client-noTSX-x86_64-cpu"
"Icelake-Client-v1-x86_64-cpu"
"Icelake-Client-v2-x86_64-cpu"
"Icelake-Client-v3-x86_64-cpu"
"Icelake-Client-x86_64-cpu"
- 'zero-copy-send' migration feature added
- display 'sdl' qapified
- 'arch-lbr' cpu feature added
- new HyperV enlightenments:
'hv-tlbflush-ext'
'hv-tlbflush-direct'
'hv-emsr-bitmap'
'hv-xmm-input'
- 'none-machine' has two new properties:
- "boot" described as "Boot configuration"
- "memory" described as "Memory size configuration"
- 'igd-passthrough-isa-bridge' is now Xen-only
- CXL: Compute eXpress Link related devices:
"CXL"
"cxl-rp",
"cxl-type3",
"pxb-cxl",
"pxb-cxl-bus",
"pxb-cxl-host",
- 'dma-translation' feature of 'intel-iommu'
- 'vmcb-clean' cpu feature now migratable:
- possibly due to host kernel upgrade
- changes commandline generated for the 'cpu-host-model' case of
qemuxml2argvtest
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'STREQ' is used to compare the override alias with the device alias.
While the parser ensures that the override alias is non-NULL, the device
alias may be NULL and STREQ doesn't handle that.
Fixes: 38ab5c9ead
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/321
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to use the 'name' variable and just overwrite it with the FD
number when FDs are passed on the monitor. Otherwise we will read NULL
path if the FD is accessed before being passed on the monitor. The idea
of this helper is to simplify the monitor code so it would be
counterproductive to have other behaviour.
Fixes the following symptom:
$ virsh attach-interface cd network default --model virtio
error: Failed to attach interface
error: internal error: unable to execute QEMU command 'netdev_add': File descriptor named '(null)' has not been found
Fixes: bca9047906
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/318
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2092856
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the 'k' modifier for integers introduce 'K' for long
integers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Obtaining a screenshot via virDomainScreenshot() works like this:
1) we create a temp file, label it, then
2) tell QEMU to store the screenshot into it, and
3) finally, open the file for transfer via virStream
Since the file is just temporary and even explicitly unlinked at
the end, no seclabel restoration is done. This makes perfect
sense for security models which attach a label to file itself
(DAC, SELinux) because the label is gone with the file. However,
for models where a list of files and allowed actions is kept on a
side (AppArmor) this approach means we just append files into the
profile and never remove them. In turn, the file grows and policy
update takes longer with each entry.
Restore the seclabel for AppArmor's sake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The virStorageSourceGetActualType() function returns either
virStorageSource->type (which is of type virStorageType), or
virStorageSourcePoolDef->type, which really stores a value of the
same enum. Thus, the latter struct can be changed so that the
virStorageSourceGetActualType() function can return correct type
instead of generic int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
There are three places (two in domain_conf.c and one in
qemu_migration.c) where a virStorageSource->type is typecasted to
virStorageType (for the purpose of catching missing enum member
in a switch() statement at compile time). This is needless,
because as of v8.2.0-rc1~120 the struct member is of proper type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Commit a1465e661e added the 'manual' disk snapshot mode documentation
but didn't allow it in the schema as default snapshot mode for a disk.
Add the needed value into the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Certain documentation bits tried to put a reference of a value into
quotes, but that's not needed for both the pure view of the rST source
and the rendered output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace the two outstanding invocations and remove the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
