Enable the flags in the status xml2xmtest and add an exaple to the test
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As of v9.4.0-rc2~5 it is possible to specify guest address where
a virtio-mem/virtio-pmem memory device is mapped to. What that
commit forgot to introduce was a check for overlaps.
And yes, this is technically an O(n^2) algorithm, as
virDomainMemoryDefValidate() is called over each memory device
and after this, virDomainMemoryDefValidate() also iterates over
each memory device. But given there's usually only a handful of
such devices, and this runs only when parsing domain XML I guess
code readability wins over some less obvious solution.
Resolves: https://issues.redhat.com/browse/RHEL-4452
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current message can be misleading, because it seems to suggest
that no firmware of the requested type is available on the system.
What actually happens most of the time, however, is that despite
having multiple firmwares of the right type to choose from, none
of them is suitable because of lacking some specific feature or
being incompatible with some setting that the user has explicitly
enabled.
Providing an error message that describes exactly the problem is
not feasible, since we would have to list each candidate along
with the reason why we rejected it, which would get out of hand
quickly.
As a small but hopefully helpful improvement over the current
situation, reword the error message to make it clearer that the
culprit is not necessarily the firmware type, but rather the
overall domain configuration.
Suggested-by: Michael Kjörling <7d1340278307@ewoof.net>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's not possible to use password-protected ssh keys directly with
libvirt because libvirt doesn't have any way to prompt a user for the
password. To accomodate password-protected key files, an administrator
can add these keys to an ssh agent and then configure the domain with
the path to the ssh-agent socket.
Note that this requires an administrator or management app to
configure the ssh-agent with an appropriate socket path and add the
necessary keys to it. In addition, it does not currently work with
selinux enabled. The ssh-agent socket would need a label that libvirt
would be allowed to access rather than unconfined_t.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, we can support logging in with
an ssh key file. Pass the path to the configured key file and the
username to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, use the configured value for
knownHosts and pass it to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, lookup the password from the
configured secret and securely pass it to the nbdkit process using fd
passing.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Adds the ability to monitor the nbdkit process so that we can take
action in case the child exits unexpectedly.
When the nbdkit process exits, we pause the vm, restart nbdkit, and then
resume the vm. This allows the vm to continue working in the event of a
nbdkit failure.
Eventually we may want to generalize this functionality since we may
need something similar for e.g. qemu-storage-daemon, etc.
The process is monitored with the pidfd_open() syscall if it exists
(since linux 5.3). Otherwise it resorts to checking whether the process
is alive once a second. The one-second time period was chosen somewhat
arbitrarily.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We were testing the arguments that were being passed to qemu when a disk
was being served by nbdkit, but the arguments used to start nbdkit
itself were not testable. This adds a test to ensure that we're invoking
nbdkit correctly for various disk source definitions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For virStorageSource objects that contain an nbdkitProcess, start that
nbdkit process to serve that network drive and then pass the nbdkit
socket to qemu rather than sending the network url to qemu directly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add xml to the private data for a disk source to represent the nbdkit
process so that the state can be re-created if the libvirt daemon is
restarted. Format:
<nbdkit>
<pidfile>/path/to/nbdkit.pid</pidfile>
<socketfile>/path/to/nbdkit.socket</socketfile>
</nbdkit>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add new DO_TEST_CAPS_LATEST_NBDKIT macro to test xml2argv for various
nbdkit capability scenarios.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There was support in the code for parsing protocol='ssh' on network disk
sources, but it was not present in the xml schema. Add this to the
schema.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since commit 54257ed51b on S390x qemuxml2argvtest fails with the following errors:
144) QEMU XML-2-ARGV cpu-kvmclock.x86_64-latest ... libvirt: CPU Driver error : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
FAILED
2023-09-14 13:01:23.883+0000: 4113077: info : libvirt version: 9.8.0
2023-09-14 13:01:23.883+0000: 4113077: info : hostname: a46lp61.lnxne.boe
2023-09-14 13:01:23.883+0000: 4113077: error : virCPUx86Compare:1954 : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
1059) QEMU XML-2-ARGV cpu-check-partial.x86_64-latest ... libvirt: CPU Driver error : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
FAILED
2023-09-14 13:01:23.885+0000: 4113077: error : virCPUx86Compare:1954 : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
1064) QEMU XML-2-ARGV cpu-check-default-partial2.x86_64-latest ... libvirt: CPU Driver error : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
FAILED
2023-09-14 13:01:23.885+0000: 4113077: error : virCPUx86Compare:1954 : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
3 tests failed.
Fixes: 54257ed51b
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Requires recent qemu with support for the virtio-blk-vhost-vdpa device
and the ability to pass a /dev/fdset/N path for the vdpa path (8.1.0)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1900770
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemuInterfaceVDPAConnect() was a helper function for connecting to the
vdpa device file. But in order to support other vdpa devices besides
network interfaces (e.g. vdpa block devices) make this function a bit
more generic.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Check whether the qemu binary supports the vdpa block driver. We can't
rely simply on the existence of the virtio-blk-vhost-vdpa block driver
since the first releases of qemu didn't support fd-passing for this
driver. So we have to check for the 'fdset' feature on the driver
object. This feature will be present in the qemu 8.1.0 release and was
merged to qemu in commit 98b126f5.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This was added in qemu commit 166b174188.
No additional features had to be added to libvirt.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that all fake-caps testing was removed we can also remove the
filling of the fake caps by cpu models.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove all the code for adding fake machines into the testing capability
cache as we no longer have any machines in it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The status XML doesn't require any capabilities to be parsed and
formatted back. Remove all qemuCaps related code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all tests were converted to use real capabilities we can drop
x86_64 from the tooling to create fake capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The rest of the test cases has no change in the output now that we've
assumed some flags.
Remove the fake-caps test macros after conversion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities, but select the fake 'Haswell' host CPU for test
stability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously without modern capabilities the test was relying on a CPU
model which was not entered into a fake list of supported cpus.
With real capabilities we have to pick a CPU model which is supported by
libvirt but in some version is not supported by qemu. I've picked
EPYC-Milan, which was introduced into qemu-6.0.
This test configures a CPU which is equivalent to EPYC-Rome by disabling
features from EPYC-Milan and uses a versioned real caps test to check it
against a qemu which doesn't support EPYC-Milan.
With real capabilities though, we can also do a positive test case by
using a version whic doesh support it. I've specifically not used the
LATEST caps so that it doesn't change once capabilities are bumped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the fake Haswell processor definition and augment the list of
features to make the test pass.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities, but select the fake 'Haswell' host CPU for test
stability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modernize all test cases which set 'Haswell' as the host cpu model.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modernize test cases using 'host-mode' cpu type, where the actual CPU
doesn't isn't important.
As using the host cpu from the 'latest' capabilities data would cause
test churn in case the host cpu changes in the future, convert them
using the overriden Haswell cpu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'smp-dies' test case into 'cpu-topology4' and remove
unnecessary cruft.
Remove cpu definition from 'cpu-topology2' as it's not relevant to the
test case.
Remove 'smp' case as it's covered by the rest.
Use real capabilities for all of them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As these were using DO_TEST_FULL the churn-reducing patches didn't
influence these.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since qemu-8.0 a new way to disable 'hpet' via -machine was added.
Properly test both branches with real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume the features modern qemus have to bring the test data closer
to the 'latest' real-caps versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume the two features modern qemus have to bring the test data closer
to the 'latest' real-caps versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume the two features modern qemus have to bring the test data closer
to the 'latest' real-caps versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume the support for the 'pcie-root-port' all modern qemus have to
bring the test data closer to the 'latest' real-caps versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To minimize further churn when coverting to real capabilities, assume
that all fake-caps machines support the piix3 USB controller.
Since we already have solid testing of USB controllers, this will have
effect only in cases when it's not relevant to the test itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename the 'usb-controller-explicit-(unavailable-)q35' test case to
'usb-controller-nec-xhci'. Since this also covers what
'usb-controller-xhci' was testing the latter is removed.
Other 'usb-xhci' test cases which were using the NEC controller are also
renamed to contain the name.
In case of 'usb-controller-qemu-xhci' the negative test case is deleted
as we don't need two cases for missing explicitly specified controller
and the positive case is modernized to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Improve testing of an explicitly requested USB controller without a
model being provided.
For this purpose the 'usb-controller' case is renamed to
'usb-controller-default-i440fx'; 'usb-controller-default-q35' is moved
up to form a group. In both cases tests are covnerted to use
DO_TEST_CAPS_LATEST.
A new 'usb-controller-default-isapc' negative test case is added for
symmetry.
The negative test case 'usb-controller-default-unavailable-q35' is
converted to use latest caps, but stripping the default controller
instead of using fake caps. Additionally for symmetry
'usb-controller-default-unavailable-i440fx' is added although that
doesn't cause failure, but rather a graceful downgrade to use '-usb'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are per-machine type variations on which usb controller will be
picked on an x86_64 machine. Add test cases where a USB controller is
completely missing to cover all 3 cases ('isapc', 'pc', 'q35') when an
USB controller is not explicitly requested by the user.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move all controller related tests together and consolidate naming of the
test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to minimize further churn, make all fake-caps test assume that
the seccomp sandbox is supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable a few defaults that will decrease churn when converting tests to
real capabilities.
Since the fake machines are added only for x86_64 at this point we can
assume that ACPI is present via -machine.
In case of the default ram id assume the same. Additionally the logic
was broken as fake capabilities don't have a version so the default RAM
was never actually populated into fake caps tests.
For CPU we add 'qemu64' as that is the default picked by qemu.
We also assume that qemu requires an explicit backend for -numa, which
is the case for modern machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'numatune-memory' case is completely dropped as it's sufficiently
covered by 'numatune-memnode'.
The positive fake-caps version of 'numatune-memnode' is dropped as it's
covered by the two existing real caps invocations.
'numatune-memory-invalid-nodeset', 'numatune-memnode-invalid-mode',
'numatune-memnode-nocpu', 'numatune-memnodes-problematic' parsing error
negative cases are converted to use latest capabilities.
'numatune-static-nodeset-exceed-hostnode' commandline generation failure
negative case is converted to use latest capabilities.
'numatune-memnode-no-memory', 'numatune-distances',
'numatune-auto-nodeset-invalid', 'numatune-auto-prefer' positive cases
are converted to use latest capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use proper version for negative case of 'hugepages-memaccess3'
QEMU allowed to configure a memory backend for default ram since
qemu-5.2. Fix the test to use real capability data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To minimize upcoming churn in test data when they will be converted to
latest capabilities enable JSON syntax for -device, -object, and -netdev
for all fake caps test files. Doing this should also help git track
renames of the files better as there will be more of consistent context
present.
We can do this safely as internally we generate JSON first and then
back-convert it into the old-style commandline if given qemu doesn't
support it. This means that all generated content will be the same.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the notion of legacy cpus as there are no test cases using it any
more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to 'cpu-host-model' add a real capability invocation for each
version we support and remove the old fake caps invocation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to 'cpu-host-model' add a real capability invocation for each
version we support and remove the old fake caps invocation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The feature is supported since qemu-5.1. Use real qemu-5.0 caps for the
test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop tests which already are tested with real caps, thus the fake caps
version doesn't bring much value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Few tests were invoked multiple times either with identical or
equivalent config. Remove those invocations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change DO_TEST_GIC so that it accepts the version and switch it to use
DO_TEST_CAPS_ARCH_VER_FULL internally which will ensure that the output
filenames conform to the format we use for real capabilities.
This also allows us to convert a few of versioned tests to use this
improved macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've forgot to add test invocations with real caps for qemu versions
starting with 6.2.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'display' option for the 'vfio-pci' device was added in qemu-2.12
and can't be compiled out. Assume support for the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions have this feature and it can't be compiled
out. The logic is a bit more complex in this instance as the flag is
asserted if:
if (ARCH_IS_X86(qemuCaps->arch) &&
virQEMUCapsGet(qemuCaps, QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION)) {
virQEMUCapsSet(qemuCaps, QEMU_CAPS_CPU_CACHE);
}
Now QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION is available since qemu-2.8 but
only on certain architectures, thus we need to keep the flag itself, but
x86_64 is one of them.
The flag can be also assumed as qemuValidateDomainDefCpu rejects any
cache config on non-x86 arches.
Remove any use of the capability and drop the impossible test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QMP monitor is the only thing we support at this point, thus all other
tests test the same thing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At this point only x86_64 is using fake machines, and for real machines
we don't populate the fake cpu models. Thus we can remove everything
non-x86_64.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a test uses ARG_CAPS_HOST_CPU_MODEL feature we override the global
host cpu model to the selected CPU but don't clear it afterwards. This
can trip up fake caps tests following a test which uses this feature.
This does not happen with real caps, because unless overriden, the host
cpu from capabilities is always populated as the host cpu.
Clear the CPU on cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally the preferred machine which is 'pc' for x86_64 must be kept
in the first place in the array of machines. This was not the case when
stripping the machine aliases for use in tests (so that test output
stays stable) where we've created a new entry for the alias. This means
that the original name (e.g. pc-i440fx-8.1) stayed in the first place.
To fix this we now swap the names around and create a new entry at the
end for the specific type. Additionally the default flag is not
propagated to the copy.
This is also visible now in the output of 'qemuxml2xmltest' as the test
cases which use the default machine type return to 'pc' instead of the
more specific name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for PIIX power management was added in qemu commit
v1.0-3094-g459ae5ea5a and the suport for ICH9 power management was added
in qemu commit v2.2.0-542-g6ac0d8d44c and both can't be compiled out.
This means we can always assume support for these features. Remove the
validation and impossible tests. Move relevant bits from
'q35-pm-disable' to 'q35' test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the modern infrastructure to populate capabilities cache with real
capabilities instead of the faked one which will be soon removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When we parse <mac address="00:00:00:00:00:00"/> we keep that in memory
and pass it down to the hypervisor. However, that MAC address is not
strictly valid as it is not marked as locally administered (bit 0x02)
but it is not even globally unique. It is also used for loopback device
on Linux, for example. And QEMU sees such MAC address just as "not
specified" and generates a new one that libvirt does not even know
about. So to make the overall experience better we now generate it if
the supplied one is all clear.
Resolves: https://issues.redhat.com/browse/RHEL-974
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All qemu versions have that command and cpu hotplug code now directly
probes the machine type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Nowadays all tests were considered 'modern' so it makes no longer sense
to have that field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The tests were using a copy of a x86_64 based XML and thus
'qemuhotplugtest' was selecting wrong capabilities to use for that
specific test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They represent nanoseconds, and we accept such values already. Not that
anyone would use such values in the wild, but even one person testing
QEMU could put in a bigger value and will be bothered with validation
errors after every `virsh edit`. Also add a test for it.
Resolves: https://issues.redhat.com/browse/RHEL-1717
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reverting external snapshot for running VM doesn't work correctly so we
should not report this capability until it is fixed.
This reverts commit de71573bfe.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit adds building of `discard_granularity` disk option
for qemu commandline.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1849570
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit implements the newly defined Network Metadata Get and
Set APIs into the test driver.
It also adds a new testcase "networkmetadatatest" to test the APIs.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now all tests invoke a real-capability version. Remove DO_TEST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities for these last few tests that were not modernized
due to use of 'WHEN_INACTIVE'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than having a separate argument to DO_TEST pass the state via
newly added flags 'FLAG_SKIP_CONFIG_ACTIVE'. The '_INACTIVE' equivalent
was not added as there's no test which'd use it.
Remove the old 'WHEN_' flags and move the decision logic out of the
DO_TEST macro as any addition to the logic makes the compiler take much
longer to compile qemuxml2xmltest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass the state-based suffix directly as string.
Document the logic how the filename is chosen.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test files for the 'ch' driver were not validated against the schema
and thus also didn't conform to the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our XML schema requires absolute paths for the <kernel> and disk source
values. Fix the 'ch' test to have absolute paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead, call it virPCIDeviceGetCurrentDriverPathAndName() to avoid
confusion with the device name that is stored in the virPCIDevice
object - that one is not necessarily the name of the current driver
for the device, but could instead be the driver that we want to be
bound to the device in the future.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the past we just kept track of the type of the "stub driver" (the
driver that is bound to a device in order to assign it to a
guest). The next commit will add a stubDriverName to go along with
type, so lets use stubDriverType for the existing enum to make it
easier to keep track of whether we're talking about the name or the
type.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Previous commits were all about empty strings and empty JSON
arrays. Introduce a test case for "[]" to make sure we pare it
correctly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
As explained earlier, 'mdevctl' can output nothing. Add a test
case to nodedevmdevctltest which covers this situation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The mdevctl-list-empty test case is there to test whether an
empty JSON array "[]" is handled correctly by mdevctl handling
code. Well, mdevctl can output both, an empty JSON array or no
output at all.
Therefore, rename "mdevctl-list-empty" test case to
"mdevctl-list-empty-array" which is more descriptive and also
frees up slot for actual empty output (handled in next commits).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This is brand new way of closing FDs before exec(). We need to
close all FDs except those we want to explicitly pass to avoid
leaking FDs into the child. Historically, we've done this by
either iterating over all opened FDs and closing them one by one
(or preserving them), or by iterating over an FD interval [2 ...
N] and closing them one by one followed by calling closefrom(N +
1). This is a lot of syscalls.
That's why Linux kernel developers introduced new close_from
syscall. It closes all FDs within given range, in a single
syscall. Since we keep list of FDs we want to preserve and pass
to the child process, we can use this syscall to close all FDs
in between. We don't even need to care about opened FDs.
Of course, we have to check whether the syscall is available and
fall back to the old implementation if it isn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Convert all cases using DO_TEST() to use DO_TEST_CAPS_LATEST() and
remove DO_TEST() to prevent further use.
Most of the changes are related to CPU being present in the output XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all tests using fake capabilities to use DO_TEST_CAPS_LATEST.
Note that rename detection in git didn't work too well here and the
files may not correspond.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The device was removed in qemu-4.0 and is superseded by 'ivshmem-plain'
and 'ivshmem-doorbell'.
Always report error when the old version is used and drop the irrelevant
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upgrade the relevant test cases to use latest capabilities. Note that
the 'shmem' (ivshmem) device is no longer supported and will be dropped
later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we've used QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS as witness
that the topology must cover the maximum number ov vcpus. qemu started
to enforce this in qemu-2.5, thus we can now always do the check.
This change also requires aligning the topology in certain test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Finish the conversion of cases which didn't need any special
capabilities to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Version-lock the test to qemu-5.0.0 as it's the latest qemu that
supports 'vxhs' and thus the test can't use 'latest'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The output files from 'qemuxml2argvtest' may have the real capability
suffix e.g. 'pci-rom-disabled-invalid.x86_64-latest.xml' which would not
be detected as being invalid and thus causing a test failure.
Change the logic to find '-invalid.' so that we can properly use
'virschematest' with test cases using real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'disk-cdrom-empty-network-invalid' is a special case were the input
XML is invalid according to the schema, but after processing a valid XML
is produced.
This corner case doesn't play well with 'virschematest' which uses the
file suffix to determine whether the file is invalid.
Upcoming patch will change the 'virschematest' condition, which would
start detecting this XML as invalid.
Use the '-active'/'-inactive' suffix for the file, which is possible
with qemuxml2xmltest so that an upcoming patch will not cause test
failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all tests using the 'DO_TEST_NOCAPS' "fake" capability
invocation to use DO_TEST_CAPS_LATEST and remove the DO_TEST_NOCAPS
macro to prevent further use.
Most of the output file changes are related to default USB controller
type and the CPU becoming defined in the XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are no more tests depending on '/usr/bin/qemu-system-i386' thus we
don't have to carry the data any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the rest of the files using 'qemu-system-i386' to
'qemu-system-x86_64'. The 'cpu*' tests are done separately to emphasise
that there's no change in the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert tests which use DO_TEST_NOCAPS in both tests and the
qemuxml2xml variant has a symlink back to the qemuxml2argv input file.
This is done to separate the conversion before a patch converts all
DO_TEST_NOCAPS variants in qemuxml2xmltest to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the emulator and architecture to x86_64, for all non-cpu related
test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At this point we setup the master key with all VMs, so this specific
test case no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the previous version of this negative test now passes,
create a new version that still triggers the intended failure.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that, after the recent changes, the test passes, its old
name is no longer accurate.
While at it, enable the xml2xml part for it as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to the way the information is stored by the XML parser, we've
had this quirk where specifying any information about the loader
or NVRAM would implicitly set its format to raw. That is,
<nvram>/path/to/guest_VARS.fd</nvram>
would effectively be interpreted as
<nvram format='raw'>/path/to/guest_VARS.fd</nvram>
forcing the use of raw format firmware even when qcow2 format
would normally be preferred based on the ordering of firmware
descriptors. This behavior can be worked around in a number of
ways, but it's fairly unintuitive.
In order to remove this quirk, move the selection of the default
firmware format from the parser down to the individual drivers.
Most drivers only support raw firmware images, so they can
unconditionally set the format early and be done with it; the
QEMU driver, however, supports multiple formats and so in that
case we want this default to be applied as late as possible,
when we have already ruled out the possibility of using qcow2
formatted firmware images.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Keep things consistent by using the same file extension for the
generated NVRAM path as the NVRAM template.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the user included loader.readonly=no in the domain XML, we
should not pick a firmware build that expects to work with
loader.readonly=yes.
https://bugzilla.redhat.com/show_bug.cgi?id=2196178
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now, we only generate it after finding a matching entry
either among firmware descriptors or in the legacy firmware
list.
Even if the domain is configured to use a custom firmware build
that we know nothing about, however, we should still automatically
generate the NVRAM path instead of requiring the user to provide
it manually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libvirt doesn't really support the microvm machine type, but
it can parse the firmware descriptor just fine.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These are imported from Fedora 38's edk2 package.
The files that are being replaced date back to RHEL 7 and no
longer represent what libvirt is likely to encounter on an
actual production system.
Notably, the paths have all changed, with both x86_64 and
aarch64 builds now living under /usr/share/edk2 and the AAVMF
name being having been phased out.
Additionally, the 4MB qcow2 format builds have been introduced
on x86_64 and given high priority, effectively making qcow2
the default format across architectures.
The impact of these changes on the test suite is, predictably,
quite severe.
For the cases where paths to firmware files were explicitly
provided as part of the input, they have been adjusted so that
the modern paths are used instead of the legacy ones. Other
than that, input files have been left untouched.
The following expected changes can be seen in output files:
* where qcow2 firmware was used on x86_64, Secure Boot
support is now enabled;
* all ABI_UPDATE test cases for x86_64 now use qcow2
formatted firmware;
* test cases where legacy paths were manually provided
no longer get additional information about the firmware
added to the output XML.
Some of the changes described above highlight why, in order
to guarantee a stable guest ABI over time and regardless of
changes to the host's configuration, it was necessary to move
firmware selection from VM startup time to VM creation time.
In a few cases, updating the firmware descriptors changes the
behavior in a way that's undesired and uncovers latent bugs
in libvirt:
* firmware-manual-efi-secboot-legacy-paths ends up with
Secure Boot disabled, despite the input XML specifically
requesting it to be enabled;
* firmware-manual-efi-rw-modern-paths loses the
loader.readonly=no part of the configuration and starts
using an NVRAM file;
* firmware-manual-efi-nvram-template-nonstandard starts
failing altogether with a fairly obscure error message.
We're going to address all these issues with upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of these are just additional coverage, but a few demonstrate
bugs in libvirt:
* firmware-manual-efi-nvram-template-nonstandard sees the NVRAM
template path, which was explicitly provided in the XML,
being overridden by the firmware selection machinery;
* firmware-auto-efi-rw* and firmware-manual-efi-rw-legacy-paths
lose the loader.readonly=no setting and thus behave
differently than requested;
* firmware-manual-efi-loader-path-nonstandard fails because an
NVRAM path doesn't get generated.
We're going to address all these issues with upcoming changes.
Note that the firmware-auto-efi-nvram-template-nonstandard
failure is expected: firmware autoselection has been enabled, but
the NVRAM template points to a custom path that's not mentioned
in any of the firmware descriptors and so it can't succeed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new name better describes the test scenario and will fit
better with the additional tests that we're about to introduce.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the idea behind introducing the abi-update variant of
a test is showing that libvirt behaves differently based on
whether the configuration is for a newly-defined domain or an
existing one, we don't want the input files to ever go out of
sync.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
That's what we already use in almost all cases.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using the unversioned machine type means that firmware
descriptors can't be used to discover additional information
about the chosen firmware build.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Firmware selection is not relevant to these tests, so adopt
the most convenient approach.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have a number of tests that can benefit from this macro
instead of open-coding it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update to v8.1.0-rc4
Notable changes:
- 'dirty-limit' migration feature added
- 'vcpu-dirty-limit', 'x-vcpu-dirty-limit-period' parameters added
- 'dirty-limit-ring-full-time', 'dirty-limit-throttle-time-per-round' statistics added
- migration statistic of number of skipped zero pages is now deprecated
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For historical reasons (i.e. unknown reason) we put channel
sockets into a path derived from cfg->libDir which is a path that
survives host reboots (e.g. /var/lib/libvirt/...). This is not
necessary and in fact for session daemon creates a longer prefix:
XDG_CONFIG_HOME -> /home/user/.config
XDG_RUNTIME_DIR -> /run/user/1000
Worse, if host is rebooted suddenly (e.g. due to power loss) then
we leave files behind and nobody will ever remove them.
Therefore, place the channel target dir into state dir.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2173980
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A <channel/> device is basically an UNIX socket into guest.
Whatever is sent from the host, appears in the guest and vice
versa. But because of that, the length of the path to the socket
is important (underscored by fact that we derive the path from
domain short name). But there are still cases where we might not
fit into UNIX_PATH_MAX limit (usually 108 characters), because
the path is derived also from other variables, e.g.
XDG_CONFIG_HOME for session domains.
There are two components though, that are needless: "/target/"
and "domain-" prefix. Drop them. This is safe to do, because
running domains have their path saved in status XML and even
though paths are dropped on migration, they are not part of guest
ABI and thus we are free to change them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There are some cases left after previous commit which were not
picked up by coccinelle. Mostly, becuase the spatch was not
generic enough. We are left with cases like: two variables
declared on one line, a variable declared in #ifdef-s (there are
notoriously difficult for coccinelle), arrays, macro definitions,
etc.
Finish what coccinelle started, by hand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
This is a more concise approach and guarantees there is
no time window where the struct is uninitialized.
Generated using the following semantic patch:
@@
type T;
identifier X;
@@
- T X;
+ T X = { 0 };
... when exists
(
- memset(&X, 0, sizeof(X));
|
- memset(&X, 0, sizeof(T));
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
There are couple of variables that are declared at function
beginning but then used solely within a block (either for() loop
or if() statement). And just before their use they are zeroed
explicitly using memset(). Decrease their scope, use struct zero
initializer and drop explicit memset().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Now that we don't use it for probing at all we can remove all the
corresponding monitor code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability code now probes the presence of commands from the QMP
schema instead of using 'query-commands'. Don't call the command and
adjust the '.replies' files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for configuring the 'wwn' of a SCSI disk was added in qemu
commit 27395add759ff4caeb0 (v1.0-3326-g27395add75) and can't be compiled
out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update the test data on x86_64 to v8.0.0-2835-g361d539735
Notable changes:
- added new commands:
- cxl-inject-dram-event
- cxl-inject-general-media-event
- cxl-inject-memory-module-event
- cxl-inject-poison
- switchover-ack
- q35-8.1 machine type now supports 1024 cpus
- new cpu models:
- 'SapphireRapids-v2'
- 'GraniteRapids-v1'
- removed commands:
- x-query-profile
- cpu features which can be emulated now:
- rdseed, rdpid, 3dnowprefetch, xsaveerptr, wbnoinvd
- applicable CPU bug mitigation flags are now exposed to TCG guests to
allow using more named models
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In an effort to use strictly real capability testing all tests were
converted to do insertion of their own capabilities when required, thus
we don't need to popluate the capabilities. This will also promote using
proper capabilities based on what the test is trying to achieve.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the platform which is getting most development for the checkpoint XML
examples so that it's tested against latest capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some test cases require a real definition and thus parse a XML with the
definition to obtain it. Convert the code to use real capabilities and
switch to x86_64.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the platform which is getting most development for the snapshot XML
examples so that it's tested against latest capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rewrite the capability fetching to use the new helper, thus simplifying
the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'testQemuInsertRealCaps' looks up and inserts real capabilities into the
capability 'file cache' for testing purposes. Effectively this helper
replaces following steps:
1) testQemuGetRealCaps
2) virFileCacheClear
3) qemuTestCapsCacheInsert
This helper doesn't copy the capabilities that are borrowed from it's
internal cache thus they must not be modified afterwards in contrast to
the above steps.
The use of this helper is in simple tests which require some form of
capabilities to parse a definition but don't care about doctoring them
in any way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce testQemuGetRealCapsInternal that loads and caches the
capabilities. testQemuGetRealCaps just copies the cache entry and
returns it to the user.
The new helper will be used in a helper that doesn't modify the
capabilities and thus we don't need to copy it before use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Expand the default machine type alias of the 'latest' capabilities for
an architecture before caching it rather than after copying it, so that
we don't duplicate the work all the time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The domain capabilities data feature a firmware section which is filled
by few entries. The entries used until now looked real and it was
suspicious that a x86_64 host was listing aarch64 firmware images which
should not happen.
Fill it by an obviously fake path as it's not actually interpreted in a
meaningful way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since nobody is expected to run valgrind over scripts now, we can
drop plenty of suppressions. Also, there are some old ones that
no longer exist and new ones, that are not covered.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A test case can be part of a test suite (just like we already
have 'syntax-check'). This then allows developers to run only a
subset of tests. For instance - when using valgrind test setup
(`meson test -C _build/ --setup valgrind`) it makes zero sense to
run syntax-check tests or other script based tests (e.g.
check-augeas-*, check-remote_protocol, etc.). What does makes
sense is to run compiled binaries.
Strictly speaking, reaching that goal is as trivial as annotating
only those compiled tests (declared in tests/meson.build) and
running them selectively:
meson test -C _build/ --setup valgrind --suite $TAG
But it may be also desirable to run test scripts separately.
Therefore, introduce two new tags: 'bin' for compiled tests, and
'script' for script based tests and annotate each test()
accordingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virtio-gpu 'blob' support was insufficiently validated. Qemu
requires a memfd memory backing in order to use udmabuf and enable blob
support. Example error:
$ virsh start rhel9
error: Failed to start domain 'rhel9'
error: internal error: qemu unexpectedly closed the monitor: 2023-07-18T02:33:57.083178Z qemu-kvm: -device {"driver":"virtio-vga","id":"video0","max_outputs":1,"blob":true,"bus":"pcie.0","addr":"0x1"}: cannot enable blob resources without udmabuf
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, the way to set PC speaker for a guest was to pass:
-soundhw pcspk
but as of QEMU commit v5.1.0-rc0~28^2~3 this is deprecated and we
should use:
-machine pcspk-audiodev=$id
instead. The old way was then removed in commit v7.1.0-rc0~99^2~3.
Now, ideally we would have a capability selecting whether we talk
to a QEMU that understands the new way or not. But it's not that
simple - the machine attribute is just an alias to the .audiodev=
attribute of 'isa-pcspk' object and both are created in
pc_machine_initfn() function, i.e. not then the PC_MACHINE() class
is initialized, but when it's instantiated. IOW, it's not possible
for us to query whether we're dealing with older or newer QEMU.
But given that the newer version is supported since v5.1.0 and the
minimal version we require is v4.2.0 (i.e. there are two releases
which don't understand the newer cmd line) and how frequently this
feature is (un-)used (the issue was reported after ~1 year since it
stopped working), I believe we can live without any capability and
just use the newer cmd line unconditionally.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/490
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Now that the QEMU_CAPS_USB_STORAGE_REMOVABLE capability is no
longer used we can stop querying it and retire it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After previous commit, there's no functional difference between
real virRandomGenerateWWN() and the mocked version. Drop the mock
then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit be1b7d5b18 introduced parsing /proc/cpuinfo for "address size"
which is not including on S390 and therefore reports an internal error.
Lets remove the parsing on S390.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add async-teardown to the features list in domain capabilities allowing
high level management to introspect the availability of the asynchronous
teardown feature.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Up until v2.11.0-rc2~19^2~3 QEMU used to require at least one
NUMA node to be configured when memory hotplug was enabled. After
that commit, QEMU automatically adds a NUMA node if none was
specified on the cmd line. Reflect this in domain XML, i.e.
explicitly add a NUMA node into our domain definition if needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2216236
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Asynchronous teardown can be specified if the QEMU binary supports it by
adding in the domain XML
<features>
...
<async-teardown enabled='yes|no'/>
...
</features>
By default this new feature is disabled.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU capability is looking in query-command-line-options response for
...
{
"parameters": [
{
"name": "async-teardown",
"type": "boolean"
}
],
"option": "run-with"
}
...
allow to use the QEMU option -run-with async-teardown=on|off
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let us introduce the xml and reply files for QEMU 8.1.0 on s390x.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In newer QEMU libvirt combinations acpi support is no longer tolerated
and ignored. Therfore before upgrading the test capabilities to QEMU
8.1.0 replies removing the acpi feature from the domain XMLs.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow //disk/target@removable for scsi disk devices, since QEMU has support
the removable attribute for scsi-hd device from v0.14.0[1].
[1]: 419e691f8e: scsi-disk: Allow overriding SCSI INQUIRY removable bit
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fix the syntax-check failures (which can be seen after
python3-flake8-import-order package is installed) with the help
of isort[1]:
289/316 libvirt:syntax-check / flake8 FAIL 5.24s exit status 2
[1]: https://pycqa.github.io/isort/
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update to v8.0.0-1739-g5f9dd6a8ce and build on a newer kernel and with
newer libblkio.
Notable changes:
- 'fdset' feature is supported for the vdpa block backend provided by
libblkio
- 'xsaves' feature is optional for EPYC-Rome
- 'cryptodev-backend-lkcf' and 'PIIX3-xen' devices removed
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Qemu 8.1.0 will add discard_no_unref option for qcow2 images.
When this option is enabled (default=false), then it will no longer
unreference clusters when guest does a discard, but it will just free
the blocks (useful for incremental backups for example) and pass the
discard to the lower layer.
This was implemented to avoid fragmentation within the qcow2 image.
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qcow2 driver allows passing discards to the storage while keeping
the reference of the block, and just marking it as zeroed. This can
decrease the levels of fragmentation of the qcow2 metadata when
discards are enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a config where both DIMM and non-DIMM <memory> devices are used so
that it validates that only DIMMs require memory slots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Memory slots are required only for DIMM-like devices, but the maximum
memory address space is relevant also for other non-DIMM memory devices
such as virtio-mem. Allow configurations where no slots are added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Memory slots are required only for DIMM-like devices, while other
devices defined via <memory> such as virtio-mem may use the PCI bus and
thus do not require/consume a memory slot.
Fix the validation code to calculate the required count of memory
devices only for DIMMs and NVDIMMs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specify the memory size by using '-m size=2048k' instead of just '-m 2'.
The new syntax is used when memory hotplug is enabled. To preserve
memory sizing, if memory hotplug is disabled the size is rounded down to
the nearest mebibyte.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already report the hosts physical address size in host capabilities,
but computing a baseline CPU definition is done from domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With the last user gone this function can be abolished. It is
preferable to use _ll instead since that is not a subject to 32/64 bit
scaling.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add data as of v8.0.0-1619-g369081c455:
Notable changes:
- 'SapphireRapids' cpu model added
- 'EPYC-Genoa(-v1)' cpu model added
- 'EPYC-Milan-v2' cpu model added
- 'EPYC-Rome-(v3|v4)' cpu models added
- new cpu features:
'fb-clear', 'cmpccxadd', 'vnmi', 'flush-l1d', 'avx-vnni-int8', 'avx-ifma',
'no-nested-data-bp', 'null-sel-clr-base', 'amd-psfd', 'auto-ibrs', 'amx-fp16',
'prefetchiti', 'lfence-always-serializing', 'avx-ne-convert'
- 8.1 machine types added
- QMP schema:
- 'block-latency-histogram-set' gained 'boundaries-zap' property
- 'qcow2' block driver gained 'discard-no-unref' flag
- 'input-send-event' now supports the 'mtt' type and corresponding properties
- 'memory-backend-file' object now has a 'offset' property
- 'query-blockstats' reports 'failed_zone_append_operations', 'avg_zone_append_latency_ns'
'avg_zone_append_queue_depth', 'zone_append_bytes', 'zone_append_latency_histogram',
'zone_append_operations', 'zone_append_merged', 'zone_append_total_time_ns'
- 'single-step' property of 'query-status' is deprecated
- 'vcpu' argument of 'trace-events-(set|get'-state' is deprecated
'cpu-host-model' qemuxml2argv test output changed as EPYC-Rome gained
few new cpu flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'trace-event-get-state' was used for testing schema validation as it had
simple arguments. Now 'vcpu' is optional and deprecated. Fix the test so
that it won't break with upcoming qemu-8.1.
Drop the 'all-attrs' case, as it's not not really testing anything
special and for the 'missing mandatory attr' case use an empty object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Format the rule attributes in two passes, first for positive 'match' and
second pass for negative. This removes the crazy logic for switching
between match modes inside the formatter.
The refactor makes it also more clear in which cases we actually do
format something.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The parser and formatter for nwfilter rules is very strange and has
weird quirks. Add a test case trying to capture some of the quirks to
visualize how it will change when the code is refactored.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP schema validator wasn't adapted to consider features of 'object'
members and thus we didn't catch the deprecation of 'device' in
'block_set_io_throttle'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every caller will pass 'qdevid' as it's populated in the data
mandatorily with qemu-4.2 and onwards due to mandatory -blockdev use.
Thus we can drop compatibility with the old way of matching the disk via
alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every caller will pass 'qdevid' as it's populated in the data
mandatorily with qemu-4.2 and onwards due to mandatory -blockdev use.
Thus we can drop compatibility with the old way of matching the disk via
alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' argument is deprecated. All real usage in the qemu driver
already uses 'id' as we populate the 'qomName' for everything except for
SD cards where throttling didn't work with libvirt for a very long time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case is validating the QMP schema against itself. This was
useful when I was developing the validator but at this point it's no
longer needed.
Additionally the QMP schema has few deprecated members now, which our
validator doesn't catch yet, so this test would start failing once I fix
the validator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using qemuMonitorTestAddItemVerbatim is more universal and that helper
also does QMP schema validation. Remove the now unused helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace qemuMonitorTestAddItemParams by qemuMonitorTestAddItemVerbatim
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace qemuMonitorTestAddItemParams by qemuMonitorTestAddItemVerbatim
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace qemuMonitorTestAddItemParams by qemuMonitorTestAddItemVerbatim
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace qemuMonitorTestAddItemParams by qemuMonitorTestAddItemVerbatim
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuMonitorTestAddItemExpect' doesn't do QMP schema validation. Since
it's the only use we can reimplement it using 'qemuMonitorTestAddItemVerbatim'
which does schema validation and remove the old code instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Any failure which happens outside is hard to debug as errors will be
reset and not raised.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function always returns 0. Remove the return value and fix callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reformat the JSON string before allocating the test data structure so
that we don't have to free it if the reformatting fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We allow (some) domain devices to have a different <seclabel/>
than the top level domain one (this is mostly to allow access to
a resource for multiple domains). Now, we do couple of sanity
checks for such <seclabel/>, e.g. when the <label/> is specified,
but '@relabel' is set to no. But what we are missing is the
opposite: when '@relabel' is set, but no <label/> was provided.
Our schema already denies such combination. Make our parser
behave the same.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160356
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is fairly trivial. Just set .memaddr attribute if a value
was set in the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2180679
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Both virtio-mem and virtio-pmem devices have '.memaddr' attribute
which controls the address where they are mapped in the guest
memory. Ideally, users do not need to specify this as QEMU does
the right thing and computes addresses automatically on startup.
But soon, we will need to record this address as it is part of
guest ABI. And also, there might be some users that want to
control this value. Now, we are in a bit of a pickle, because
both these device types already have a PCI address, therefore we
can't just use <address/> blindly. But what we can do, is
introduce <address/> under the <target/> element. This is also
more conceptual, as knobs under <target/> control guest visible
config of memory device (and .memaddr surely falls into that
category).
NB, SgxEPCDeviceInfo struct in QMP definition also has .memaddr
attribute, but because of the way we build cmd line there's no
(easy) way to set the attribute. So ignore that for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Introduced in QEMU by commit v8.0.0-7eb061b06e.
Signed-off-by: Lin Yang <lin.a.yang@intel.com>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Commit 10b5e789c5 attempts to filter out the logical processor id
in the generated data to remove noise and irrelevant changes in the
output.
cpuid-leaf 0x0B may have more than two sub-leaves though. Filter out
logical processor id from all sub-leaves of 0x0B and 0x1F (superset
of the information in 0x0B).
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 720e8f13ff
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 1347a19f75
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: b10bc8f7ab
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
We already do check that if there's <memory mode='restrictive'/>
then all <memnode/> have to be of 'restrictive' mode too. But
what we are missing the reverse: if there is <memnode/> with
'restrictive' mode, then the <memory/> has to be of the same mode
too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2208946
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The parser makes the values mandatory and also the qemu code implements
actions for those values. The formatter skips them though. Since
format+parse is used to copy the XML at startup a definition with those
values can't be started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2203709
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use DO_TEST_CAPS_LATEST to run with the latest capapbilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all of the 'audio-default-*' cases to use capabilities from
qemu-4.2 instead of the fake caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Symlinks are hard to maintain and especially un-cool when attempting to
test against real capapbilities.
Replace symlinks by real files first so that we can switch to real caps
and see the difference.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is pretty trivial, just append "mte=on/off" to -machine
arguments.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The MTE feature (introduced in QEMU commit of v5.1.0-rc1~8^2~11)
is detectable via 'qom-list-properties' for 'virt' machine type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there's not a single caller that would
call qemuDomainGetMemLockLimitBytes() with @forceVFIO set. All
callers pass false.
Drop the unneeded argument from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
One of our examples in the 'formatbackup.rst' page shows following
config:
<disk name='vda' backup='yes'/>
The schema didn't allow it though. Fix the schema as the internals were
supposed to support it (except for the bug fixed in previous patches).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the 'disk->store' property is already allocated which happens e.g.
when the disk is described by the backup XML but the optional filename
is not filled in 'virDomainBackupDefAssignStore' would not fill in the
default location.
Fix the logic to do it also if a 'virStorageSource' categorizes as
empty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With musl-1.2.3: I get the following macros defined (from
$builddir/meson-config.h):
#define WITH_LSTAT 1
#define WITH_LSTAT64 1
#define WITH_LSTAT_DECL 1
#define WITH_STAT 1
#define WITH_STAT64 1
#define WITH_STAT_DECL 1
#define WITH___LXSTAT 1
#define WITH___LXSTAT64 1
#define WITH___XSTAT 1
#define WITH___XSTAT64 1
which in turn means the virmockstathelpers.c ends up defining:
MOCK_STAT64
MOCK_LSTAT64
But with musl-1.2.4 everything changes and the set of defined
macros gets simplified to:
#define WITH_LSTAT 1
#define WITH_LSTAT_DECL 1
#define WITH_STAT 1
#define WITH_STAT_DECL 1
#define WITH___LXSTAT 1
#define WITH___XSTAT 1
which results in no MOCK_* macros defined in
virmockstathelpers.c, i.e. no stat() mocking, nada. The reason
for this simplification are these musl commits [1][2] which
removed all 64 bit aliases. And that's not what our logic for
deciding what flavor of stat() to mock counted with.
Nevertheless, we do build with Alpine Linux in our CI, so how
come we don't see this problem there? Well, simply because Alpine
Linux maintainers decided to revert the commits [3][4]. But on
distributions that use vanilla musl, this problem can be seen
easily.
1: https://git.musl-libc.org/cgit/musl/commit/?id=246f1c811448f37a44b41cd8df8d0ef9736d95f4
2: https://git.musl-libc.org/cgit/musl/commit/?id=25e6fee27f4a293728dd15b659170e7b9c7db9bc
3: https://git.alpinelinux.org/aports/commit/main/musl?id=6a5563fbb45b3d9d60678d7bbf60dbb312a2d481
4: https://git.alpinelinux.org/aports/commit/main/musl?id=a089bd852f8983623fa85e0f5755a3e25bf53c72
Resolves: https://bugs.gentoo.org/906167
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Neither of tests that use virfirewallmock.c
(networkxml2firewalltest, nwfilterebiptablestest,
nwfilterxml2firewalltest, virfirewalltest) really call
virFindFileInPath(). But at least networkxml2firewalltest calls
virFirewallDIsRegistered(), under the hood. Now, the actual
implementation connects to dbus and something, which is
definitely not what we want in our test suite.
Therefore, drop virFindFileInPath() implementation and provide
implementation for virFirewallDIsRegistered() which just returns
-2 to signal that firewalld is not registered.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Allow users controlling the multi-channel mode by adding a
'multichannel' property parsed for USB audio devices and wire up the
support in the qemu driver.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop the unnecessary disk definition and use x86_64 emulator.
For 'qemuxml2argvtest' replace the fake-caps invocation by a 4.2.0
version-locked invocation and add a '_CAPS_LATEST' invocation.
For 'qemuxml2xmltest' convert to use '_CAPS_LATEST' only.
There are no sound-device relevant changes in the output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case is a subset of what the 'sound-device' case tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the support for the persisted poll parameters and remove
restrictions on saving config when modifying them during runtime.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we allow configuring the 'poll-max-ns', 'poll-grow', and
'poll-shrink' parameters of qemu iothreads only during runtime and they
are not persisted. Add XML machinery to persist them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When preparing a SCSI <hostdev/> with passthrough of a host SCSI
adapter (i.e. no protocol), a virStorageSource structure is
initialized and stored inside virDomainHostdevDef. But the source
structure is filled in many places, with almost the same code.
Firstly, qemuProcessPrepareHostHostdev() and
qemuConnectDomainXMLToNativePrepareHostHostdev() are the same.
Secondly, qemuDomainPrepareHostdev() allocates the src structure,
only to let qemuProcessPrepareHostHostdev() fill src->path later.
Well, src->path can be filled at the same place where the src
structure is allocated (qemuDomainPrepareHostdev()) which renders
the other two functions needless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The qemuxml2argvtest does a bit of 'fixups' to parsed
virDomainDef just before generating the cmd line. For instance,
it sets PCI backend for hostdevs (to VFIO). The reason for this
is that we want to make the test host independent and thus
letting the code chose backend at runtime might render different
results on different machines. But this is not necessary, as
virpcimock (that the test uses) already creates a fake, but
stable environment (where /dev/vfio/vfio and IOMMU groups exist),
thus qemuHostdevHostSupportsPassthroughVFIO() returns true,
regardless of the actual host support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Just like we check the resulting domain XML after ATTACH and
DETACH, we should do the same after UPDATE action. This is as
simple as calling testQemuHotplugCheckResult() and providing
missing XMLs. For those test cases where no change is done, we
can just make the expected XML a symlink to the input XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This brings us one step closer to the caller of
qemuDomainAttachDeviceLive()
(qemuDomainAttachDeviceLiveAndConfig()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This is a leftover from v2.0.0-rc1~300. In v1.2.12-rc1~43 we've
introduced a code that explicitly sets vm->def->id to -1 to force
generation of inactive XML. But this was removed in the later
commit, which forgot to remove the restoration of the original
dom ID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's a comment in testQemuHotplug() trying to explain why we
need to unlock the monitor object. Well, while it might have been
correct when being introduced, it's no longer factually correct
as just any function (attach/detach/update) might talk to the
monitor and it expects the monitor to be unlocked (as it calls
qemuDomainObjEnterMonitor() + qemuDomainObjExitMonitor()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's no reason for qemuhotplugtest to reimplement which device
update function to call (testQemuHotplugUpdate()) when
qemuDomainUpdateDeviceLive() already does that. Thus, drop
testQemuHotplugUpdate() and call qemuDomainUpdateDeviceLive()
directly.
BTW: this also shows why reimplementing
qemuDomainUpdateDeviceLive() is bad idea: The
"disk-cdrom-nochange" test is succeeding only because
testQemuHotplugUpdate() supports graphics and returns an
(expected) error for every other devtype.
NB, there's still missing check that the resulting XML is the
expected one (just like we do for attach and detach), but that's
pre-existing and will be fixed later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's no reason for qemuhotplugtest to reimplement which device
attach function to call (testQemuHotplugAttach()) when
qemuDomainAttachDeviceLive() already does that. Thus, drop
testQemuHotplugAttach() and call qemuDomainAttachDeviceLive()
directly.
There's one small catch though, qemuDomainAttachDeviceLive() now
calls one monitor command more (to list all aliases). We don't
care really, because we're not testing that. Therefore, just
provide a dummy reply.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The testQemuHotplugDetach() already does call
qemuDomainDetachDeviceLive() but only for some device types. For
the rest it reports an error (but only if running test
verbosely). This makes no sense. Just call
qemuDomainDetachDeviceLive() directly and drop
testQemuHotplugDetach().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The disk private data contain information about the tray and
removability of the disk. Until recently we didn't support hotplug of
removable disks thus it wasn't a problem but now when you can hotplug a
CDROM you would not be able to open its tray.
Fix it by updating the hotplugged disk the same way we do at startup.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160435
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This makes it also work during attach. Also add a test for attaching a
watchdog with incompatible action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2187278
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can launch qemu with it, but it will not work since it's not even
probed by the kernel at the mapped address with different machine types
since they are expected to be connected to ISA and not even its newer
LPC counterpart found on q35. And it does not exist on non-x86
architectures.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting QEMU, or when hotplugging a PCI device QEMU might
lock some memory. How much? Well, that's an undecidable problem.
But despite that, we try to guess. And it more or less works,
until there's a counter example. This time, it's a guest with
both <hostdev/> and an NVMe <disk/>. I've started a simple guest
with 4GiB of memory:
# virsh dominfo fedora
Max memory: 4194304 KiB
Used memory: 4194304 KiB
And here are the amounts of memory that QEMU tried to lock,
obtained via:
grep VmLck /proc/$(pgrep qemu-kvm)/status
1) with just one <hostdev/>
VmLck: 4194308 kB
2) with just one NVMe <disk/>
VmLck: 4328544 kB
3) with one <hostdev/> and one NVMe <disk/>
VmLck: 8522852 kB
Now, what's surprising is case 2) where the locked memory exceeds
the VM memory. It almost resembles VDPA. Therefore, treat is as
such.
Unfortunately, I don't have a box with two or more spare NVMe-s
so I can't tell for sure. But setting limit too tight means QEMU
refuses to start.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2014030
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's quite difficult, if not impossible, to create a working RISC-V VMs
using the current default machine type of 'spike_v1.10'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's quite difficult, if not impossible, to create a usable ARM VMs
using the current default machine type of 'integratorcp'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
That's already the case in practice, but it's a better
experience for the user if we reject this configuration
outright instead of silently ignoring part of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit fc216db4fb introduced a mocked test with binary test data
which fails on big endian machines.
Therefore build the viracpitest test only on little endian machines.
Fixes: fc216db4fb
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a small kludge in the parser to avoid unnecessarily
blocking incoming migration from a range of recent libvirt
releases.
https://bugzilla.redhat.com/show_bug.cgi?id=2184966
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The canonical order for <os> child elements is <firmware>
then <loader>.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all tests were converted to use real capabilities we don't need
it any more. Remove it so that no new tests are added with it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace them with full files so that potential fallout from conversion
to real capabilities is more obvious and the test is simpler to add.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patch will be modifying all of them to use real capabilities.
This way it will be more obvious what will change.
Keeping the symlinks around is tedious for humans to do. Waste some
storage instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions at this point support both 'qemu-xhci' and
'nec-xhci' controllers. To allow using real capabilities restructure the
tests so that we test both controllers explicitly as well as the
selection of the default model.
Also add a xml2xml test invocation of the unified test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fake-caps version was kept as an example that the code behaves the
same with real capabilities. Now it's not needed any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With all supported qemu versions we'll pick PCIe to use for the implicit
address busses (those lacking an explicit controller) and thus the
addresses must reflect that.
Update the test to add the new flags, and fix the addresses.
Additionally add a real-caps version of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the output changes of upcoming modernization more visible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real caps and clear out flags for PCIe so that we have a real-ish
example of an aarch64 machine using mmio.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test data is effectively identical to the
'aarch64-virtio-pci-default' case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a version for 'latest' caps as well as '4.2.0'. The test
demonstrates that with a real qemu PCIe will be used instead of MMIO.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the two negative cases to use real capapbilities as well as the
positive case for situations when KVM is not used by stripping the
QEMU_CAPS_KVM flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert 'aarch64-gic-default' and 'aarch64-gic-none' cases to use real
capabilities both latest and locked to 4.2.0 to show what would happen
with a real qemu.
Note that the qemuTestSetHostArch() calls are needed as real caps
override the setting once used. Once we convert all tests to real data
this can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will be modifying the tests for selecting the GIC
version to use real capabilities. This in certain cases will show that a
different version is picked.
Using symlinks makes it inconvenient to do the modifications and
unobvious what changed.
Remove the symlinks and replace them by real output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a test that checks newly introduced virAcpi module.
There are three IORT tables from a real HW (IORT_ampere,
IORT_gigabyte and IORT_qualcomm), then there's one from a VM
(IORT_virt_aarch64) and one that I handcrafted to be empty
(IORT_empty).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This flag is intended to be used exclusively in the context of
building GLib itself and should not be passed to the compiler
by a third-party project such as libvirt.
Reverts: 77d1fa5 ("tests: Compile virgdbusmock.c with GIO_COMPILATION enabled")
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the tests that use this mock (networkxml2firewalltest,
virsystemdtest, virpolkittest) are either no-ops on Windows, or
are not compiled at all on the target.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Left behind by commit 35eb484 ("tests: remove firewalld
backend tests from virfirewalltest.c").
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix the logic selecting when to run the tests to skip unknown variants
rather than the default variant.
Fixes: 738c5bae88
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that all tests were converted to use real capabilities we don't need
it any more. Remove it so that no new tests are added with it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the rest of the outstanding tests to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities for the CPU test. The negative test case for QEMUs
without QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION is removed as the feature is
now supported by all supported qemu versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'hostdev-subsys-mdev-vfio-ccw', 'hostdev-vfio-zpci', and
'hostdev-vfio-zpci-autogenerate-fids' test cases have negative versions
which are invoked without capabilities. This does not make sense going
forward as the tests are going to be switched to real capabilities.
Remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all tests were converted to use real capabilities we don't need
it any more. Remove it so that no new tests are added with it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the last outstanding test cases for ppc64 to use real
capabilities.
In couple cases this actually fixes the test case to test what it was
intending to do.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the tested features are always present in the 'pseries' machine
with oldest-supported qemu-4.2, thus the tests don't make sense any
more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an example case showing that every feature in the 'pseries-features'
test works also with the oldest supported qemu version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuhotplugtest validates only that a given command is used but not the
arguments of the command. With this patch we'll validate the arguments
against the QMP schema thus we can catch possible issues with deprecated
commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than test with synthetic capabilities which might get outdated
reuse testQemuGetRealCaps to fetch latest capabilities and use those.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass in the whole struct rather than splitting out individual members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With modern qemu we use 'set-action' instead of 'watchdog-set-action'.
Switch to it so that later qemuhotplugtest can be switched to use real
capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All real qemus support the 'lsilogic' controller and thus would pick it
as the default rather than virtio-scsi. Since lsilogic is limited in
some aspects we should test it with the proper default model.
In the future the fake capabilities will be replaced by real
capabilities so this test would break.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use testQemuGetRealCaps to fetch real capabilities and use it in place
of the faked caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the lookup of the corresponding QMP schema used for validation of
QMP commands from 'testCompareXMLToArgvValidateSchema' to
testQemuGetRealCaps as an optional step.
This will simplify using QMP command validation in other tests which
will use testQemuGetRealCaps.
'testutilsqemuschema' module is now linked into 'test_utils_qemu' as it
contains no monitor-specific code itself and after this patch it's
referenced directly from that module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'testQemuInfoInitArgs' contains the logic to fetch and use the
capabilities for tests using 'struct testQemuInfo'.
As in certain cases use of 'struct testQemuInfo' is an overkill extract
the code to fetch the capabilities into a standalone helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Technically for the LXC capabilities lookup we don't have another test
case, but given that it shares the implementation with qemu and thus the
only thing we are missing out on is testing of filling of the fake
capabilities which doesn't make sense testing.
Remove vircapstest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case doesn't validate the returned map of cpus, just checks
that it didn't fail. We test the returned value indirectly via
qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have testing based on real capabilities in 'qemucaps2xmltest' for
qemu guest related data and 'vircaps2xmltest' tests the host data
gathering. The testing done here makes no sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify use of the function by determining the number of elements
inside the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's never set to any real value. Remove it along with the caching code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests using this were refactored to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The last tests using it were refactored to use real capabilities and no
new tests should ever use it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The last tests using it were refactored to use real capabilities and no
new tests should ever use it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the possibility to control the variant of the test data for real
caps testing in qemuxml2argvtest and qemuxml2xmltest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The data is based on the generic variant of the 7.2.0 data on aarch64.
Only modification to the '.replies' file is that KVM is reported as
unavailable/unsupported.
Ideally this will be replaced by a dump captured from a real system.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The data is based on the generic variant of the 7.2.0 data on x86_64.
Only modification to the '.replies' file is that KVM is reported as
unavailable/unsupported.
Ideally this will be replaced by a dump captured from a real system.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to signal to the capabilities code that HVF variant is used so
that it can behave as if it were running on OSX.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It needs to be mocked only for 'qemucapabilitiestest'. Additionally
moving it here will allow to control the return value based on the test
data which will be required for testing dumps from HVF accelerated qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the architecture specific code to probe the support for HVF
from the actual setting of the capability.
In upcoming patches 'virQEMUCapsProbeHVF' will be mocked in the
testsuite to provide testing for the HVF hypervisor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The logic in 'virQEMUCapsInitQMP' invokes a second probe of qemu in case
when acceleration is used and TCG is supported to specifically probe the
CPU and features of non-accelerated guests.
The same logic must then be used in 'qemucapabilitiestest' when
replaying the data for testing otherwise the test would fail.
Export 'virQEMUCapsHaveAccel' for test usage and use the same logic
in 'testQemuCaps'.
Fix the comment in 'virQEMUCapsInitQMP' to outline what's happening.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow testing of capabilities of OSX systems with the hvf accelerator.
'domaincapstest' requires special handling as we need to set
VIR_DOMAIN_VIRT_HVF virt type in such case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use it to format test file name as in other cases. Currently
domaincapstest will not run for any unknown variant. This patch is meant
to simplify the review of patches doing actual functional changes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemucapabilitiestest' and other users of the capability data can
benefit from adding a discriminator string to have multiple instances
for the same version+architecture tuple.
This will in the future allow us to have specific capability versions
for test cases which require a specific host feature or are based on a
different operating system.
Add the basic skeleton for parsing the variant string and passing it
around into test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Explain what the purpose of these files is as well as how they are
named, captured, used and modified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fetch the full hash of 'latest' files and just return the correct one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than finding the newest caps file iteratively for specific
architectures in multiple passes over the directory we can simply load
the latest for everything in one pass by storing the version in the hash
table and filling it progressively.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Parsing a version where components are separated by dots, while other
components are also separated by dots is a bit insane. Separate the
version by an underscore.
To achieve this we rename all the caps files and adjust the appropriate
places formatting the path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Construct the capsName/emulator strings as initialization of variable
definition and move definition of 'struct testData' above the code.
This means that 'name' field will be initialized later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than trying to cram everything into one printf statement format
the type with prefix and machine with prefix separately and then
concatenate everything into the filename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The changes to the output files are the exact opposite of
those from commit 22207713cf: this is proof that the fix is
working as intended, and that existing domains will keep using
raw firmware images regardless of whether or not qcow2 images
are available on the system and have higher priority.
New domains will keep picking whatever firmware is considered
the preferred one according to the order of descriptors, as
evidenced by the fact that the recently introduced
firmware-auto-efi-abi-update-aarch64 test case is unaffected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The input is identical to that of the existing
firmware-auto-efi-aarch64 test, but in this case we want to
cover the scenario in which that input is used to define a new
domain rather than loading the definition of an existing domain
from disk.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are couple of g_dbus_*() functions we provide an
alternative implementation for in our virgdbusmock.c. However,
these functions are declared in gio/gdbusconnection.h as:
GIO_AVAILABLE_IN_ALL
GDBusConnection *g_bus_get_sync (GBusType bus_type,
GCancellable *cancellable,
GError **error);
where GIO_AVAILABLE_IN_ALL is declared as (in
/gio/gio-visibility.h):
#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(GIO_STATIC_COMPILATION)
# define _GIO_EXPORT __declspec(dllexport)
# define _GIO_IMPORT __declspec(dllimport)
#elif __GNUC__ >= 4
# define _GIO_EXPORT __attribute__((visibility("default")))
# define _GIO_IMPORT
#else
# define _GIO_EXPORT
# define _GIO_IMPORT
#endif
#ifdef GIO_COMPILATION
# define _GIO_API _GIO_EXPORT
#else
# define _GIO_API _GIO_IMPORT
#endif
#define _GIO_EXTERN _GIO_API extern
#define GIO_AVAILABLE_IN_ALL _GIO_EXTERN
Now, on mingw the functions we mock are declared with dllimport
attribute which makes the compiler unhappy:
../tests/virgdbusmock.c:25:24: error: 'g_bus_get_sync'
redeclared without dllimport attribute: previous dllimport
ignored [-Werror=attributes]
The solution is to do what glib does when it compiles the gio
module: set GIO_COMPILATION macro which in turn annotates the
function with dllexport attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Even when the user is not taking advantage of firmware
autoselection and instead manually providing all the necessary
information, in most cases they're still going to use firmware
builds that are provided by the OS vendor, are installed in
standard paths and come with a corresponding firmware
descriptor.
Similarly, even when the user is not guiding the autoselection
process by specifying the desired status of certain features
and instead is relying on the system-level descriptor priority
being set up correctly, libvirt will still ultimately decide to
use a specific descriptor, which includes information about the
firmware's features.
In both these cases, take the additional information that were
obtained from the firmware descriptor and reflect them back into
the domain XML, where they can be conveniently inspected by the
user and management applications alike.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we no longer reject configurations that include both
this information and explicit firmware details, as long of
course as everything is internally consistent, and that we've
ensured that we produce maximally compatible XML on migration,
we can stop stripping this information at the end of the
firmware selection process.
There are several advantages to keeping this information around:
* if the user wants to change the firmware configuration for
an existing VM, they can simply drop the <loader> and
<nvram> elements, tweak the firmware autoselection parameters
and let libvirt pick a firmware that matches on the new
requirements;
* management applications can inspect the XML and easily
figure out firmware-related information without having to
reverse-engineer them based on some opaque paths.
Overall, this change makes things more transparent and easier to
understand. The improvement is so significant that, in a
follow-up commit, we're going to ensure that this information is
available in even more cases.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libvirt 8.6.0 introduced these checks and very clearly delineated
two possible firmware selection scenarios: manual firmware
selection, where the user is responsible for providing all
information, and firmware autoselection, where a list of desired
features is provided and everything else is handled by libvirt.
In the interest of maintaining the clear separation between these
two scenarios, setting most attributes when firmware autoselection
is active will result in the configuration being rejected.
This works fine, but is unnecessarily restrictive: in most cases,
the additional information that the user has provided matches
the information that libvirt would have discovered on its own by
looking at firmware descriptors, and asking the user to scrub it
from the XML only result in pointless friction.
Remove these checks entirely.
Unsurprisingly, this results in a few test cases that were
rejected until now to suddenly start working and producing
sensible results.
The firmware-auto-efi-loader-path-nonstandard test case is
notable: while we can now enable the xml2xml part of the test,
the xml2argv part is still failing, although in a slightly
different way. This is expected: since the firmware binary is a
non-standard one, libvirt is unable to figure out the missing
information from a firmware descriptor, and the configuration
is still ultimately an invalid one. However, if we were to find
such a configuration on disk at daemon startup, we would not
ignore it completely and instead would offer the user a chance
to fix it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now we're checking that firmware descriptor masking works
as intended by creating an empty file matching 60-ovmf-sb.json
in name.
However, that firmware descriptors contains the details for a
perfectly valid and quite common situation: Secure Boot being
supported by the firmware build, but being effectively disabled
by the lack of certificates in the NVRAM template.
Unmask that firmware descriptor, and instead create a dummy one
that has higher priority than all other OVMF builds and points
to paths that are obviously incorrect, which should make it
easy to notice it getting accidentally unmasked in the future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These cover the same scenarios as the matching test cases for
autoselection.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is identical to the existing
firmware-auto-efi-loader-path-nonstandard test case, but uses
a standard firmware path.
Right now the two test cases behave identically, but that's
going to change in the future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This test is intended to simulate the use of an OVMF firmware
image installed under a non-standard path. In order to make
such a configuration work, the user would have to provide
additional information.
Right now it doesn't matter, because the configuration is
rejected anyway, but the behavior is going to change slightly
in the future. Prepare by making the configuration more
complete and realistic.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This unifies the naming between the manual and automatic
selection cases, clarifies the contents of the tests and makes
room for more tests being added in the future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The newly added luks-any rbd encryption format in qemu
allows for opening both LUKS and LUKS2 encryption formats.
This commit enables libvirt uses to use this wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability represents that qemu supports the "luks-any" encryption
format for RBD images.
Both LUKS and LUKS2 formats can be parsed using this wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit enables libvirt users to use layered encryption
of RBD images, using the librbd encryption engine.
This allows opening of an encrypted cloned image
whose parent is encrypted with a possibly different encryption key.
To open such images, multiple encryption secrets are expected
to be defined under the encryption XML tag.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit changes the _qemuDomainStorageSourcePrivate struct
to support multiple secrets (instead of a single one before this commit).
This will useful for storage encryption requiring more than a single secret.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability represents that qemu supports the layered encryption
of RBD images, where a cloned image is encrypted with a possible
different encryption than its parent image.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When a thread-context object is specified on the cmd line, then
QEMU spawns a thread and sets its affinity to the list of NUMA
nodes specified in .node-affinity attribute. And this works just
fine, until the main QEMU thread itself is not restricted.
Because of v5.3.0-rc1~18 we restrict the main emulator thread
even before QEMU is executed and thus then it tries to set
affinity of a thread-context thread, it inevitably fails with:
Setting CPU affinity failed: Invalid argument
Now, we could lift the pinning temporarily, let QEMU spawn all
thread-context threads, and enforce pinning again, but that would
require some form of communication with QEMU (maybe -preconfig?).
But that would still be wrong, because it would circumvent
<emulatorpin/>.
Technically speaking, thread-context is an internal
implementation detail of QEMU, and if it weren't for it, the main
emulator thread would be doing the allocation. Therefore, we
should honor the pinning and prune the list of node so that
inaccessible ones are dropped.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2154750
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Since qemuxml2argvtest is now using virnumamock, there's no need
for qemuxml2argvmock to offer reimplementation of virNuma*()
functions. Also, the comment about CLang and FreeBSD (introduced
in v4.3.0-40-g77ac204d14) is no longer true. Looks like noinline
attribute was the missing culprit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
So far, the memory-hotplug-dimm-addr.xml test case pins its vCPUs
onto CPUs 0-1 which correspond to NUMA node #0 (per
tests/vircaps2xmldata/linux-basic/system/node/node0). Place vCPUs
onto nodes #1 and #2 too so that DIMM <memory/> device can
continue using thread-context after future patches. This
configuration, as-is currently, would make QEMU error out anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We have couple of qemuxml2argvtest cases where up to 8 NUMA nodes
are assumed. These are used to check whether disjoint ranges of
host-nodes= is generated properly. Without prejudice to the
generality, we can rewrite corresponding XML files to use up to 4
NUMA nodes and still have disjoint ranges.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While no part of cmd line building process currently depends on a
host NUMA configuration, this will change soon. Use freshly
changed virnumamock from qemuxml2argvtest and make the mock read
NUMA data from vircaps2xmldata which seems to have the most rich
NUMA configuration.
This also means, we have to start building virnumamock
unconditionally. But this is not a problem, since nothing inside
of the mock relies on Linux specificity. The whole mock is merely
just reading files and parsing them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduce a mock of virNumaGetNodeOfCPU() because soon we will
need virNumaCPUSetToNodeset() to return predictable results.
Also, fill in missing symlinks in vircaps2xmldata/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In a few places we still use the good old:
sizeof(var) / sizeof(var[0])
sizeof(var) / sizeof(int)
The G_N_ELEMENTS() macro is preferred though. In a few places we
don't link with glib, so provide the macro definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
libxl added support for specifying custom firmware paths long ago. The
functionality exists in all Xen version supported by libvirt. This patch
adds support for user-specified efi firmware paths in the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='nbd' name='foo'>
<host name='example.org' port='6000'/>
<reconnect delay='10'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 54fa1b44af ("conf: Add loadparm boot option for a boot device")
added the ability to specify a loadparm parameter on a <boot/> tag, while
commit 29ba41c2d4 ("qemu: Add loadparm to qemu command line string")
added that value to the QEMU "-machine" command line parameters.
Unfortunately, the latter commit only looked at disks and network
devices for boot information, even though anything with
VIR_DOMAIN_DEF_FORMAT_ALLOW_BOOT could potentially have this tag.
In practice, a <hostdev> tag pointing to a passthrough (SCSI or DASD)
disk device can be used in this way, which means the loadparm is
accepted, but not given to QEMU.
Correct this, and add some XML/argv tests.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This can improve performance for some guests since it reduces copying of
display data between host and guest. Requires udmabuf on the host.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Capability to determine whether this qemu supports the 'blob' option for
virtio-gpu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function doesn't set any capability and we don't want to add
arch-dependent always-peresent capabilities in the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_AES_KEY_WRAP, QEMU_CAPS_DEA_KEY_WRAP and QEMU_CAPS_LOADPARM
are always asserted via virQEMUCapsInitQMPBasicArch thus don't need to
be explicitly enabled by tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
testUpdateQEMUCaps calls virQEMUCapsInitQMPBasicArch which already sets
it. Purge the capability from the testing code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability is based on a platform check rather than what given qemu
supports.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 24cc9cda82 switched over to use -machine hpet, but one of the
steps it did was to clear the QEMU_CAPS_NO_HPET capability.
The validation check still uses the old capability though which means
that for configs which would explicitly enable HPET we'd report an error.
Since HPET is an x86(_64) platform specific device, convert the
validation check to an architecture check as all supported qemu versions
actually support it.
Modify a test case to request HPET to catch posible future problems.
Fixes: 24cc9cda82
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemu-system-aarch64' is superset of the soon to be deprecated
'qemu-system-arm' binary. We can move over all of our fake-caps tests to
real caps on aarch64.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always assert the flag for aarch64 qemus and in qemu the 'aarch64'
cpu property doesn't seem to be optional.
Remove checks and remove impossible test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the 'ppc-dtb' and 'ppce500-serial' to use real capabilities
albeit captured from a non-native machine. Thus the XML needs to be
converted to use virt type 'qemu'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The data are obtained from a x86_64 machine thus don't really represent
physical hardware, but it's better than nothing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Preserve testing of the MMIO use case in case when GPEX is complied out
of qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain cases we want to use as-real capabilities as possible but
that doesn't allow testing certain fallback scenarios of features that
can be complied out of QEMU.
ARG_QEMU_CAPS_DEL can be used similarly to ARG_QEMU_CAPS but the flag
arguments are actually masked out of the resulting caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather that populate a virQEMUCaps object we now populate a bitmap with
the fake capabilities and transfer it into the virQEMUCaps later.
This unifies the code paths between the fully fake caps tests and real
caps + fake flags.
Also the same approach will be used in upcomming patch to add
possibility to mask out flags from real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's just one case when we're populating the cache with empty caps so
that can allocate a dummy virQEMUCaps object rather than having the
logic inside qemuTestCapsCacheInsertImpl.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make all callers always pass a valid pointer which in turn allows us to
remove return value check from the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The allocation of the object itself can't fail. What can fail is the
creation of the class on a programming error. Rather than punting the
error up the stack abort() directly on the first occurence as the error
can't be fixed during runtime.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both 'kvm_machines' and 'qemu_machines' now have the same members so we
can simply drop kvm_machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All tests were converted to use real capabilities so there's no need to
support the infrastructure for fake tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the only outstanding test case for a 'sparc' machine to modern
test infrastructure.
'sparc' machine type also needs to be added to the list of supported
arches in testQemuGetLatestCaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Real capabilities populate the binary name, while fake don't. We can
directly insert the capabilities using the real binary name.
This will allow to remove 'qemu_emulators' entries once all tests are
converted to real capabilties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make callers use virFileCacheClear to clear the cache before populating
it rather than trying to overwrite what's in it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use x86_64 emulator and machine and remove the nocaps version of the
test.
Fixes: 80a37e96a9
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Integrate the two special cases used for schema testing into the more
useful qemuxml2argvtest, whose input data is still tested against the
schema.
Add also a xml output variant.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The schema tested by removed test cases is tested by other, more useful,
test cases:
- 'maxMemory'
- qemuxmlargvdata/memory-hotplug*
- 'backingChains'
- qemuxmlargvdata/disk-backing-chains*
- 'timers'
- qemuxml2argvdata/kvm-pit-delay.xml
- qemuxml2argvdata/clock-catchup.xml
- 'qemu-simple-description-title.xml'
- 'qemuxml2argvdata/minimal.xml
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out that those overrides I recently removed where actually
there for a reason, and there was a motivation behind creating
the driver config as unprivileged too O:-)
Until a solution that can both ensure predictable output and
avoid code duplication is developed, go back to the previous
approach.
Fixes: 2f56f69f7f ("tests: Create privileged config for QEMU driver")
Fixes: 0f49b6cc6b ("tests: Drop no longer necessary overrides")
Fixes: 0b464cd84f ("tests: Drop more QEMU driver config overrides")
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
These are allegedly necessary to keep the output consistent,
but now that we're using a privileged config for the driver we
get the desired behavior out of the box, and as a bonus the
paths match what you would actually see on a regular host.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We use standard paths for almost everything else.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
For almost all directories, the value we set matches the one
a standard deployment would use, but in a couple of cases they
deviate from that. Keep things consistent.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
None of these settings is specific to the xml2argv test. Moving
them to the common code ensures the behavior of the QEMU driver
is consistent across all QEMU tests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Creating a privileged config ensures these are already set
correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Our QEMU test suite effectively covers the qemu:///system
scenario, and we have to partially replace the unprivileged
config with its privileged equivalent after the fact to keep up
the illusion.
Instead of jumping through these extra hoops, we can simply
start with a privileged configuration matching the privileged
driver we're creating for test programs.
This change highlights that we were missing a couple of
overrides, specifically in the tests for passt and dbus. Now
that we're creating a privileged config, this kind of issue
shouldn't be able to slip into the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Most test programs were already doing this, and moving it to
the common code ensures we see consistent behavior across all
QEMU tests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
These are intended to be used for just a few specific tests,
but since we don't always free them up afterwards they could
end up accidentally affecting subsequent tests as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Follow the example of other similar settings and only enable it
for the few test cases that are actually about the specific
functionality, disabling it immediately afterwards.
A few test cases that were completely unrelated to SPICE TLS no
longer see the effects of having the feature enabled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Just like TLSx509certdirs, these can be set throughout the
lifetime of the test program.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The various TLSx509certdirs can be set throughout the lifetime
of the test program without issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We use these in QEMU command lines, so we should poison them
to catch test suite issues.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
QEMU deprecated the '-no-acpi' option, thus we should switch to the
modern way to use '-machine'.
Certain ARM machine types don't support ACPI. Given our historically
broken design of using '<acpi/>' without attribute to enable ACPI and
qemu's default of enabling it without '-no-acpi' such configurations
would not work.
Now when qemu reports whether given machine type supports ACPI we can do
a better decision and un-break those configs. Unfortunately not
retroactively.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/297
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The return data from 'query-machines' now contains an 'acpi' field. If
the field is present we can use it to decide how to handle user's
setting of '<acpi/>' domain feature.
Add logic to extract the 'acpi' field and store it in machine type list
along with other properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v7.2.0-2146-g2946e1af27
Notable changes:
- 'acpi' field in 'query-machines' added
- 'SapphireRapids(-v1)' cpu model added
- 'fsrs', 'fsrc', 'fzrm' cpu features added and available via TCG
- 'fsrm' feature can be now emulated by qemu
- 'smm-enabled' property added to 'ICH9-LPC' device
- 'luks-any' encryption type for RBD blockdev backend and way to
specify encryption options for parent image via 'parent'
- 'xen-event-inject', 'xen-event-list' commands added
- 'xen-xenstore', 'xen-gnttab', 'xen-evtchn', 'xen-overlay',
'xen-platform'
- 'i2c-echo' device added
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now always assume support for polling mode of iothreads.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove disks which are not necessary to demonstrate iothread config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use latest caps for the tests even though the original test case didn't
need any capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the cputune-iothreads, cputune-iothreadsched-zeropriority,
cputune-iothreadsched test files by moving the relevant elements into
the cputune case as we can setup scheduler settings for multiple objects
and thus test everything in one go.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST for cputune-numatune, cputune-zero-shares,
cputune, and vcpu-placement-static cases. Do the necessary tweaks to
work with actual data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use DO_TEST_CAPS_LATEST for the basic tests. The emulator needed to be
tweaked to work with the real caps data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'iothreads-disk' covers everything that 'iothreads' did in addition to
actually using the iothread.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions now support iothreads thus upcoming patches
will be removing the capability checks. Remove the 'iothreads-nocap'
case which will become invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setting the LIBVIRT_SKIP_CLEANUP environment variable results
in the contents of fakerootdir being preserved for inspection.
Be more helpful towards the developer and print out the path
in this case.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Instead of having each test manually initialize and cleanup
its own fakerootdir, do that as part of the common test
initialization logic in virTestMain().
In most cases we can simply drop the relevant code from the
test program, but scsihosttest uses the value of fakerootdir
as a starting point to build another path, so we need to do
things slightly differently. In order to keep things working,
we retrieve the value from the LIBVIRT_FAKE_ROOT_DIR
environment variable, same as all the mock libraries are
already doing.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Most replacements are completely straightforward but
vircgrouptest requires slightly different handling because,
instead of initializing a single fakerootdir at the start of
the test program and cleaning it up at the end, it creates
multiple different ones one after the other.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
We have this logic open-coded all over the test suite. Provide
proper helpers implementing it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
These cover various scenarios related to firmware formats,
specifically ensuring that all the ways in which the user can
ask for a non-default format to be used work correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, firmware selection is performed as part of the
domain startup process. This mostly works fine, but there's a
significant downside to this approach: since the process is
affected by factors outside of libvirt's control, specifically
the contents of the various JSON firmware descriptors and
their names, it's pretty much impossible to guarantee that the
outcome is always going to be the same. It would only take an
edk2 update, or a change made by the local admin, to render a
domain unbootable or downgrade its boot security.
To avoid this, move firmware selection to the postparse phase.
This way it will only be performed once, when the domain is
first defined; subsequent boots will not need to go through
the process again, as all the paths that were picked during
firmware selection are recorded in the domain XML.
Care is taken to ensure that existing domains are handled
correctly, even if their firmware configuration can't be
successfully resolved. Failure to complete the firmware
selection process is only considered fatal when defining a
new domain; in all other cases the error will be reported
during startup, as is already the case today.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we ignore all firmwares that are not in raw format
while performing autoselection, we can have descriptors for
firmware builds in QCOW2 format without breaking anything.
Note that the descriptors are arranged so that they have the
highest priority on aarch64, but the lowest one on x86_64.
This matches the expectation that QCOW2 will quickly be
adopted as the default on aarch64, where its use produces
significant benefits in terms of memory usage, while x86_64
will likely stick with raw for the foreseeable future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, if SMM is explicitly disabled in the domain XML
but a firmware descriptor that requires SMM to be enabled has
the highest priority and otherwise matches the requirements,
we pick that firmware only to error out later, when the domain
is started.
A better approach is to take into account the fact that SMM is
disabled while performing autoselection, and ignore all
descriptors that advertise the requires-smm feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These cover scenarios such as using the new, more verbose
format of the <nvram> element to point to a local path, mixing
firmware autoselection with non-local NVRAM files, and
explicitly disabling SMM when using firmware autoselection.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some of the test cases had only been added to the xml2argv
test program and not to the xml2xml one.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of the differences, such as those in the domain name or
amount of memory, are fairly harmless, but they still make it
more cumbersome than necessary to directly compare different
input (and output) files.
More importantly, the use of unversioned machine types in some
of the test cases results in the descriptor-based autoselection
logic being effectively skipped, because the compatible machine
types as listed in them are only the versioned variants.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already the case for the vast majority, but a few are
using explicit capabilities lists.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most test cases are on 64-bit architectures already, but there
are a couple of exceptions.
Right now this works, but it will no longer fly after some
upcoming changes. Prepare for those by switching away from
32-bit architectures.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already do this in qemuxml2argvtest.
Right now setting this doesn't change anything, but it will
become relevant later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU's "reconnect" option of "-netdev stream" tells QEMU to
periodically (period is given in seconds as an argument to the option)
attempt to reconnect to the same passt socket to which it had
originally connected to. This is useful in cases where the passt
process terminates, and libvirtd starts a new passt process in its
place (which doesn't happen yet, but will happen automatically after
an upcoming patch in this series).
Since there is no real hueristic for determining the "best" value of
the reconnect interval, rather than clutter up config with a knob that
nobody knows how to properly twiddle, we just set the reconnect timer
to 5 seconds.
"-netdev stream" first appeared in QEMU 7.2.0, but the reconnect
option won't be available until QEMU 8.0.0, so we need to check QEMU
capabilities just in case someone is using QEMU 7.2.0 (and thus can
support passt backend, but not reconnect)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Detect that the 'stream' netdev backend supports reconnecting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In commit 5af6134e I had added a new capability that is true if QEMU
allows "-netdev stream", but somehow neglected to actually check it in
commit a56f0168d when hooking up passt support to qemu. This isn't
catastrophic, since QEMU itself will still report an error, but that
error isn't as easy to understand as a libvirt-generated error.
Fixes: a56f0168d5
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability detects the availability of the pvpanic-pci
device that is required in order to use pvpanic on Arm (original
pvpanic is an emulated ISA device, for which Arm does not have
support).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Whilst reviewing a patch upstream (that ended up as
v9.0.0-200-g092176e5ec), I realized we don't have a single
xml2xml test for CH driver. Well, introduce the test with one
simple test case for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When running "virsh domcapabilities" on a s390x host, all the CPU
models show up with vendor='unknown' - which sounds kind of weird
since the vendor of these mainframe CPUs is well known: IBM.
All CPUs starting with either "z" or "gen" match a real mainframe
CPU by IBM, so let's return the string "IBM" for those now.
The only remaining ones are now the artifical "qemu" and "max"
models from QEMU itself, so it should be OK to get an "unknown"
vendor for those two.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Boris Fiuczynski<fiuczy@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virURIFormat() function either returns a string, or aborts
(on OOM). There's no way this function can return NULL (as of
v7.2.0-rc1~277). Therefore, it doesn't make sense to check its
retval against NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With the current way the myInit() is written, it's fairly easy to
miss initialization of @subsys variable as the variable is
allocated firstly on the stack and then it's assigned to
hostdev[i] which was allocated using g_new0() (this it is
containing nothing but all zeroes).
Make the subsys point to the corresponding member in hostdev[i]
from the start. This way only the important bits are overwritten
and the rest stays initialized to zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
With recent work on storing original PCI stats in
_virDomainHostdevSubsysPCI struct, the virhostdevtest can across
a latent bug we had. Only some parts of the
virDomainHostdevSubsys structure are initialized. Incidentally,
subsys->u.pci.origstates is not one of them. This lead to
unexpected crashes at runtime.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use virDomainDeviceType as type and update all switch statements which
didn't mention all possible values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <origstates> XML element captures private data of a PCI device
needed to restore it after a VM is started. Unfortunately at the point
when it was added we didn't yet have the existing private data
infrastructure.
Since the element is parsed only in cases similar to the status XML we
need to test it there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
To ensure that we can hot-unplug the disk including the associated fdset
we need to store the fdset ID in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Copy the pointer to qemuFDPass into struct qemuBlockStorageSourceAttachData
so that it can be used from qemuBuildBlockStorageSourceAttachDataCommandline
rather than looping again in qemuBuildDiskSourceCommandLineFDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The <tune/> child element of <interface/> is formatted the old
way. Switch to virXMLFormatElement().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's nothing specific about net-mtu test. In fact, if device
addresses are filled in (and some elements reordered), we get the
same XML. Make those changes to the input XML and turn the output
XML to be a symlink.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The iTCO watchdog is part of the q35 machine type since its inception,
we just did not add it implicitly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2137346
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already possible with qemu, and actually already happening with
q35 machines and a specified watchdog since q35 already includes a
watchdog we do not include in the XML. In order to express such
posibility multiple watchdogs need to be supported.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support virtio-crypto device, also support cryptodev types:
- builtin
- lkcf
Finally, we can launch a VM(QEMU) with one or more crypto devices by
libvirt.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changes in this commit:
- docs: formatdomaincaps.rst
- conf: crypto related domain caps
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce crypto device like:
<crypto model='virtio' type='qemu'>
<backend model='builtin' queues='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</crypto>
<crypto model='virtio' type='qemu'>
<backend model='lkcf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</crypto>
Currently, crypto model supports virtio only, type supports qemu only
(vhost-user in the plan). For the qemu type, backend supports modle
builtin/lkcf, and the queues is optional.
Changes in this commit:
- docs: formatdomain.rst
- schemas: domaincommon.rng
- conf: crypto related domain conf
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'domaincapstest' is currently skipping RISC-V tests. Let's enable it.
The decision of enabling the "virt" machine is based on the idea that
this is the most used QEMU RISC-V machine in the community and it's the
most likely to be widely supported in the long run.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Update RISC-V capabilities for the QEMU 8.0.0 cycle. Changes made are
based on the JSONification of device parameters.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Use g_autoptr() for virNWFilterDef and virNWFilterRuleDef and remove
unnecessary label.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
net-user-passt.args was generated early during testing of the passt
qemu commandline, when qemuxml2argvtest was using
DO_TEST("net-user-passt"). This was later changed to
DO_TEST_CAPS_LATEST(), so the file net-user-passt.x86_64-latest.args
is used instead, but the original (now unused) test file was
accidentally added to the original patch. This patch removes it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This attribute was added to support setting the --interface option for
passt, but in a post-push/pre-9.0-release review, danpb pointed out
that it would be better to use the existing <source dev='xxx'/>
attribute to set --interface rather than creating a new attribute (in
the wrong place). So we remove backend/upstream, and change the passt
commandline creation to grab the name for --interface from source/dev.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Currently, the ThreadContext object is generated whenever we see
.host-nodes attribute for a memory-backend-* object. The idea was
that when the backend is pinned to a specific set of host NUMA
nodes, then the allocation could be happening on CPUs from those
nodes too. But this may not be always possible.
Users might configure their guests in such way that vCPUs and
corresponding guest NUMA nodes are on different host NUMA nodes
than emulator thread. In this case, ThreadContext won't work,
because ThreadContext objects live in context of the emulator
thread (vCPU threads are moved around by us later, when emulator
thread finished its setup and spawned vCPU threads - see
qemuProcessSetupVcpus()). Therefore, memory allocation is done by
emulator thread which is pinned to a subset of host NUMA nodes,
but tries to create a ThreadContext object with a disjoint subset
of host NUMA nodes, which fails.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2154750
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This consists of (1) adding the necessary args to the qemu commandline
netdev option, and (2) starting a passt process prior to starting
qemu, and making sure that it is terminated when it's no longer
needed. Under normal circumstances, passt will terminate itself as
soon as qemu closes its socket, but in case of some error where qemu
is never started, or fails to startup completely, we need to terminate
passt manually.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
passt support requires "-netdev stream", which was added to QEMU in
qemu-7.2.0.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This implements XML config to represent a subset of the features
supported by 'passt' (https://passt.top), which is an alternative
backend for emulated network devices that requires no elevated
privileges (similar to slirp, but "better").
Along with setting the backend to use passt (via <backend
type='passt'/> when the interface type='user'), we also support
passt's --log-file and --interface options (via the <backend>
subelement logFile and upstream attributes) and its --tcp-ports and
--udp-ports options (which selectively forward incoming connections to
the host on to the guest) via the new <portForward> subelement of
<interface>. Here is an example of the config for a network interface
that uses passt to connect:
<interface type='user'>
<mac address='52:54:00:a8:33:fc'/>
<ip address='192.168.221.122' family='ipv4'/>
<model type='virtio'/>
<backend type='passt' logFile='/tmp/xyzzy.log' upstream='eth0'/>
<portForward address='10.0.0.1' proto='tcp' dev='eth0'>
<range start='2022' to='22'/>
<range start='5000' end='5099' to='1000'/>
<range start='5010' end='5029' exclude='yes'/>
</portForward>
<portForward proto='udp'>
<range start='10101'/>
</portForward>
</interface>
In this case:
* the guest will be offered address 192.168.221.122 for its interface
via DHCP
* the passt process will write all log messages to /tmp/xyzzy.log
* routes to the outside for the guest will be derived from the
addresses and routes associated with the host interface "eth0".
* incoming tcp port 2022 to the host will be forwarded to port 22
on the guest.
* incoming tcp ports 5000-5099 (with the exception of ports 5010-5029)
to the host will be forwarded to port 1000-1099 on the guest.
* incoming udp packets on port 10101 will be forwarded (unchanged) to
the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Initial support for network devices using passt (https://passt.top)
for the backend connection will require:
* new attributes of the <backend> subelement:
* "type" that can have the value "passt" (to differentiate from
slirp, because both slirp and passt will use <interface
type='user'>)
* "logFile" (a path to a file that passt should use for its logging)
* "upstream" (a netdev name, e.g. "eth0").
* a new subelement <portForward> (described in more detail later)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable the qemuxml2xml variant and add output data for qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'fdgroup' will allow users to specify a passed FD (via the
'virDomainFDAssociate()' API) to be used instead of opening a path.
This is useful in cases when e.g. the file is not accessible from inside
a container.
Since this uses the same disk type as when we open files via names this
patch also introduces a hypervisor feature which the hypervisor asserts
that code paths are ready for this possibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a new argument type for testQemuInfoSetArgs named ARG_FD_GROUP
which allows users to instantiate tests with populated FD passing hash
table.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Deleting external snapshots will require configuring autofinalize to
synchronize the block jobs for disks withing single snapshot in order to
be able safely abort of one of the jobs fails.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Upcoming snapshot deletion code will require that multiple commit jobs
are finished in sync. To allow aborting then if one fails we will need
to use manual finalization of the jobs.
This commit implements the monitor code for `job-finalize`.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Up until commit 629282d884, using mode=restrictive caused
virNumaSetupMemoryPolicy() to be called from qemuProcessHook(),
and that in turn resulted in virNumaNodesetIsAvailable() being
called and the nodeset being validated.
After that change, the only validation for the nodeset is the one
happening in qemuBuildMemoryBackendProps(), which is skipped when
using mode=restrictive.
Make sure virNumaNodesetIsAvailable() is called whenever a
nodeset has been provided by the user, regardless of the mode.
https://bugzilla.redhat.com/show_bug.cgi?id=2156289
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The one for mode=strict fails, as expected, while the one for
mode=restrictive currently doesn't even though it should. The
next commit will address the issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test is superseded by 'disk-backing-chains-(no)index' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit da9f3cd84b added the seclabel example into the
'disk-backing-chains' case.
Since the only thing that 'disk-backing-chains' tests which
'disk-backing-chains-(no)index' don't test is the seclabel we'll be able
to remove the test case if we add the seclabel example.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Inside of qemuCaps (for the corresponding accelerator) we have
full host CPU expansion stored, among with supported Hyper-V
Enlightenments. To report them in the domain capabilities, we
just have to pick those starting with "hv-" and see if we know
them.
You may notice that neither of our domaincapsdata test shows any
enlightenment. This is because the test works by parsing
corresponding qemucapabilitiesdata/caps_*.xml file and none of
these store the full host CPU expansion (hostCPU.fullQEMU)
because that is runtime piece of information and not formatted
into virQEMUCaps XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717611
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have qemuMonitorGetCPUModelExpansion() aware of
Hyper-V Enlightenments, we can start querying it. Two conditions
need to be met:
1) KVM is in use,
2) Arch is either x86 or arm.
It may look like modifying the first call to
qemuMonitorGetCPUModelExpansion() inside of
virQEMUCapsProbeQMPHostCPU() would be sufficient but it is not.
We really need to ask QEMU for full expansion and the first call
does not guarantee that.
For the test data, I've just copied whatever
'query-cpu-model-expansion' returned earlier, therefore there are
no hv-* props. But that's okay - the full expansion is not stored
in cache (and thus not formatted in
tests/qemucapabilitiesdata/caps_*.replies files either). This is
purely runtime thing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This continues and finishes propagation of the @hv_passthrough
argument started in the previous commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemu is about to deprecate the '-no-hpet' option in favor of configuring
the timer via '-machine'.
Use the QEMU_CAPS_MACHINE_HPET capability to switch to the new syntax
and mask out the old QEMU_CAPS_NO_HPET capability at the same time to
prevent using the old syntax.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The capability represents that qemu accepts the configuration of the
HPET timer via -machine hpet=on/off rather than the
soon-to-be-deprecated '-no-hpet' option.
The capability is detected from 'query-command-line-options' which
recently added the 'hpet' option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add test data based on qemu commit v7.2.0-333-g222059a0fc
- query-command-line-options now reports more accurate data
- machine types for the 8.0 cycle were added
- vhost-vdpa device support was added
- default value of 'noreboot' changed from 'true' to 'false'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
That way it actually fits with what the condition checks for.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This way we actually check for the proper error, not any error like invalid JSON
format.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It just so happens that our JSON snippets in
qemucapabilitiesdata/*.replies files are separated by an empty
line. These empty lines are then overwritten to make a single
line JSON. Nevertheless, the line counter @line is not
incremented which then leads to a misleading numbers in errors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a new backend type 'external' for connecting to a swtpm daemon
not managed by libvirtd.
Mostly in one commit, thanks to -Wswitch and the way we generate
capabilities.
https://bugzilla.redhat.com/show_bug.cgi?id=2063723
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 7.2 was released, update the capabilities data to the final state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The linux/magic.h header has existed since
commit e18fa700c9a31360bc8f193aa543b7ef7b39a06b
Author: Jeff Garzik <jeff@garzik.org>
Date: Sun Sep 24 11:13:19 2006 -0400
Move several *_SUPER_MAGIC symbols to include/linux/magic.h.
This is old enough that all our supported platforms can be assumed
to have this header.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
