This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Add a test case for when the QEMU_CAPS_NO_KVM_PIT capability is set.
This capability is mutually exclusive to QEMU_CAPS_KVM_PIT_TICK_POLICY
and results in the same output regardless of whether "discard" or
"delay" was specified in the guest XML for 'tickpolicy'.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Separate out the "policy=discard" into it's own specific
qemu command line.
We'll rename "kvm-pit-device" test case to be "kvm-pit-discard"
since it has the syntax we'd be using.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
By a mistake, for the VIR_DOMAIN_TIMER_TICKPOLICY_DELAY qemu
command line creation, 'discard' was used instead of 'delay'
in commit id '1569fa14'.
Test "kvm-pit-delay" is fixed accordingly to show the correct
option being generated.
Remove the (now) redundant kvm-pit-device tests. As it turns
out there is no need to specify both QEMU_CAPS_NO_KVM_PIT and
QEMU_CAPS_KVM_PIT_TICK_POLICY since they are mutually exclusive
and "kvm-pit-device" becomes just the same as "kvm-pit-delay".
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Qemu has abandoned the +/-feature syntax in favor of key=value. Some
architectures (s390) do not support +/-feature. So we update libvirt to handle
both formats.
If we detect a sufficiently new Qemu (indicated by support for qmp
query-cpu-model-expansion) we use key=value else we fall back to +/-feature.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
When qmp query-cpu-model-expansion is available probe Qemu for its view of the
host model. In kvm environments this can provide a more complete view of the
host model because features supported by Qemu and Kvm can be considered.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
query-cpu-model-expansion is used to get a list of features for a given cpu
model name or to get the model and features of the host hardware/environment
as seen by Qemu/kvm.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Tests domain capabilities on s390x using the Qemu 2.8 capabilities data.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Expected Qemu replies for versions 2.7 and 2.8 from the s390x
Qemu binary.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Our STREQ_NULLABLE and STRNEQ_NULLABLE macros are too
complicated. This was a result of some broken version of gcc.
However, that is long gone and therefore we can simplify the
macros.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After c07d1c1c4f got merged it uncovered couple of broken domain
XMLs for bhyvexml2argv test. Some disk drives had incompatible
type of address configured.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After 478ddedc12 a bug is fixed where we wrongly presumed loopack
device name on non-Linux systems. It's lo0. However, the fix is
not reflected in the tests which are failing now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the Makefile in tests/ we initialize couple of variables like
test_programs, test_libraries and test_helpers. These variables
contain all the targets that we need to build in order to run
the test suite. So we initialize test_programs and test_helpers
and then conditionally add targets to them depending on what we
are building with. Then we repeat the same process with
test_libraries. It makes no sense to have two separate if-endif
sequences.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the internal implementation relies on a json parser being
available, it make no sense to run this test if there's none
available.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This tests uses preload, which should work on any ELF-based platform
(and indeed it passes on Linux, GNU/kFreeBSD, and FreeBSD).
Also remove the WITH_DBUS conditional, as the test is already built
based on that conditional.
Add tests for controller based disks to check disk address compatibility
with disk bus types.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Similarly to localOnly DNS domain, localPtr attribute can be used to
tell the DNS server not to forward reverse lookups for unknown IPs which
belong to the virtual network.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If the allocation fails in DO_TEST_FLUSH_PROLOGUE, then 'mgr == NULL',
but the code continues on - which won't be good. So modify the macro
to cause an immediate failure and jump to a cleanup label.
Found by Coverity as FORWARD_NULL event.
If you've ever tried running a huge page backed guest under
different user than in qemu.conf, you probably failed. Problem is
even though we have corresponding APIs in the security drivers,
there's no implementation and thus we don't relabel the huge page
path. But even if we did, so far all of the domains share the
same path:
/hugepageMount/libvirt/qemu
Our only option there would be to set 0777 mode on the qemu dir
which is totally unsafe. Therefore, we can create dir on
per-domain basis, i.e.:
/hugepageMount/libvirt/qemu/domainName
and chown domainName dir to the user that domain is configured to
run under.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the great rework of how we store vcpu- and iothread-related
data, we have overly complex part of code that is trying to format the
scheduler tuning data in as less lines as possible by grouping
settings for multiple threads. That was designed as an input syntax
sugar for users, but we don't need to also use that when formatting
the XML. Switching to simple enumeration makes the code nicer,
shorter and more welcoming to future changes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Qemu 2.8.0+ changes arguments structure for blockdev-add in the effort
to make it finally stable. Since libvirt recently added the detection of
gluster debug support relying on the old syntax we need to add the new
as well.
With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
So far the NSS module looks up only hostnames as provided by
guests themselves. However, there are some cases where this is
not enough: e.g. when there's a fresh new guest being installed
(with some generic hostname) say from a live ISO image; or some
(older) systems don't advertise their hostname in DHCP
transactions at all.
In cases like that it would be helpful if we translate domain
name as seen by libvirt too so that users can:
# virsh start $dom && ssh $dom
In order to achieve that new libvirt-guest module is introduced,
while older libvirt module maintains its current behaviour (that
is translating guest provided names into IP addresses).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The name of the exported functions for an NSS module is quite
fixed, it is derived from the module name:
_nss_$module_$function
Since we will create another NSS module with very similar
implementation we might as well generate the function names at
the compile time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This module will be used to track:
<domain, mac address list>
pairs. It will be important to know these mappings without
libvirt connection (that is from a JSON file), because NSS
module will use those to provide better host name translation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Problem with VIR_FREE() is that we are not linking
libvirt-utils.so to our mock libs therefore there will be an
unresolved symbol. Fortunately, nsstest that eventually links
with the nssmock links also with libvirt-utils.so and thus the
symbol is resolved after all. However, if one wants to run the
test binary under valgrind it is impossible to do so. Because of
the unresolved symbol.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add in the block I/O throttling group parameter to the command line
if supported. If not supported, fail command creation.
Add the xml2argvtest for testing.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modify _virDomainBlockIoTuneInfo and rng schema to support the group_name
option for iotune throttling. Document the new value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add test cases for address conflicts between disks and hostdevs that are
using drive addresses.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Don't use duplicate disk addresses in test cases unless it's useful. At
least the test case will break once we have a check for uniqueness of
addresses at time of domain definition.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
If libvirtd is running unprivileged, it can open a device's PCI config
data in sysfs, but can only read the first 64 bytes. But as part of
determining whether a device is Express or legacy PCI,
qemuDomainDeviceCalculatePCIConnectFlags() will be updated in a future
patch to call virPCIDeviceIsPCIExpress(), which tries to read beyond
the first 64 bytes of the PCI config data and fails with an error log
if the read is unsuccessful.
In order to avoid creating a parallel "quiet" version of
virPCIDeviceIsPCIExpress(), this patch passes a virQEMUDriverPtr down
through all the call chains that initialize the
qemuDomainFillDevicePCIConnectFlagsIterData, and saves the driver
pointer with the rest of the iterdata so that it can be used by
qemuDomainDeviceCalculatePCIConnectFlags(). This pointer isn't used
yet, but will be used in an upcoming patch (that detects Express vs
legacy PCI for VFIO assigned devices) to examine driver->privileged.
QEMU 2.8.0 adds support for unavailable-features in
query-cpu-definitions reply. The unavailable-features array lists CPU
features which prevent a corresponding CPU model from being usable on
current host. It can only be used when all the unavailable features are
disabled. Empty array means the CPU model can be used without
modifications.
We can use unavailable-features for providing CPU model usability info
in domain capabilities XML:
<domainCapabilities>
...
<cpu>
<mode name='host-passthrough' supported='yes'/>
<mode name='host-model' supported='yes'>
<model fallback='allow'>Skylake-Client</model>
...
</mode>
<mode name='custom' supported='yes'>
<model usable='yes'>qemu64</model>
<model usable='yes'>qemu32</model>
<model usable='no'>phenom</model>
<model usable='yes'>pentium3</model>
<model usable='yes'>pentium2</model>
<model usable='yes'>pentium</model>
<model usable='yes'>n270</model>
<model usable='yes'>kvm64</model>
<model usable='yes'>kvm32</model>
<model usable='yes'>coreduo</model>
<model usable='yes'>core2duo</model>
<model usable='no'>athlon</model>
<model usable='yes'>Westmere</model>
<model usable='yes'>Skylake-Client</model>
...
</mode>
</cpu>
...
</domainCapabilities>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
"host" CPU model is supported by a special host-passthrough CPU mode and
users is not allowed to specify this model directly with custom mode.
Thus we should not advertise "host" CPU model in domain capabilities.
This worked well on architectures for which libvirt provides a list of
supported CPU models in cpu_map.xml (since "host" is not in the list).
But we need to explicitly filter "host" model out for all other
architectures.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
CPU models (and especially some additional details which we will start
probing for later) differ depending on the accelerator. Thus we need to
call query-cpu-definitions in both KVM and TCG mode to get all data we
want.
Tests in tests/domaincapstest.c are temporarily switched to TCG to avoid
having to squash even more stuff into this single patch. They will all
be switched back later in separate commits.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
CPU related capabilities may differ depending on accelerator used when
probing. Let's use KVM if available when probing QEMU and fall back to
TCG. The created capabilities already contain all we need to distinguish
whether KVM or TCG was used:
- KVM was used when probing capabilities:
QEMU_CAPS_KVM is set
QEMU_CAPS_ENABLE_KVM is not set
- TCG was used and QEMU supports KVM, but it failed (e.g., missing
kernel module or wrong /dev/kvm permissions)
QEMU_CAPS_KVM is not set
QEMU_CAPS_ENABLE_KVM is set
- KVM was not used and QEMU does not support it
QEMU_CAPS_KVM is not set
QEMU_CAPS_ENABLE_KVM is not set
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When starting QEMU more than once during a single probing process,
qemucapsprobe utility would save QMP greeting several times, which
doesn't play well with our test monitor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's set QEMU_CAPS_KVM and QEMU_CAPS_ENABLE_KVM early so that the rest
of the probing code can use these capabilities to handle KVM/TCG replies
differently.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
With the QEMU components in place, provide the XML parsing to
invoke that code when given the following XML snippet:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn='naa.501234567890abcd'/>
</hostdev>
An optional address element can be specified within the hostdev
(pick CCW or PCI as necessary):
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0625'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
Add basic vhost-scsi tests which were cloned from hostdev-scsi-virtio-scsi
in both xml2argv and xml2xml. Added ones for both vhost-scsi-ccw and
vhost-scsi-pci since the syntaxes are slightly different between them.
Also adjusted the docs to describe the changes.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
For a new hostdev type='scsi_host' we have a number of
required functions for managing, adding, and removing the
host device to/from guests. Provide the basic infrastructure
for these tasks.
The name "SCSIVHost" (and its variants) is chosen to avoid
conflicts with existing code named "SCSIHost" to refer to
a hostdev type='scsi' protcol='none'.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
We already have a "scsi" hostdev subsys type, which refers to a single
LUN that is passed through to a guest. But what of things where
multiple LUNs are passed through via a single SCSI HBA, such as with
the vhost-scsi target? Create a new hostdev subsys type that will
carry this.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Do all the stuff for the vhost-scsi capability in QEMU,
so it's in place for our checks later.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
macOS doesn't support clock_gettime(2), at least versions prior 10.12
(I didn't actually check 10.12 though). So, use its own routines in
eventtest.
* configure.ac: check for requires symbols and define
HAVE_MACH_CLOCK_ROUTINES if found
* tests/eventtest.c: add clock_get_time() based implementation
Commit 3f71c79768 added 'qemu_id' field to track the id of the cpu
as reported by query-cpus. The patch did not include changes necessary
to propagate the id through the functions matching the data to the
libvirt cpu structures and thus all vcpus had id 0.
The field is named 'enable_id' in other structures and a patch recently
added 'qemu_id' which has different semantics. To avoid confusion in the
tests rename the field.
* virNetDevTapCreateInBridgePort() mock: free '*ifname' before
strdupping a hardoded value to it
* testCompareXMLToArgvFiles(): unref 'conn' object in cleanup
* testCompareXMLToArgvHelper(): free 'ldargs' and 'dmargs' in
cleanup
Guest CPU definitions with mode='custom' and missing <vendor> are
expected to run on a host CPU from any vendor as long as the required
CPU model can be used as a guest CPU on the host. But even though no CPU
vendor was explicitly requested we would sometimes force it due to a bug
in virCPUUpdate and virCPUTranslate.
The bug would effectively forbid cross vendor migrations even if they
were previously working just fine.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
PPC driver needs to convert POWERx_v* legacy CPU model names into POWERx
to maintain backward compatibility with existing domains. This patch
adds a new step into the guest CPU configuration work flow which CPU
drivers can use to convert legacy CPU definitions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The API is no longer used anywhere else since it was replaced by a much
saner work flow utilizing new APIs that work on virCPUDefPtr directly:
virCPUCompare, virCPUUpdate, and virCPUTranslate.
Not testing the new work flow caused some bugs to be hidden. This patch
reveals them, but doesn't attempt to fix them. To make sure all test
still pass after this patch, all affected test results are modified to
pretend the tests succeeded. All of the bugs will be fixed in the
following commits and the artificial modifications will be reverted.
The following is the list of bugs in the new CPU model work flow:
- a guest CPU with mode='custom' and missing <vendor/> gets the vendor
copied from host's CPU (the vendor should only be copied to host-model
CPUs):
DO_TEST_UPDATE("x86", "host", "min", VIR_CPU_COMPARE_IDENTICAL)
DO_TEST_UPDATE("x86", "host", "pentium3", VIR_CPU_COMPARE_IDENTICAL)
DO_TEST_GUESTCPU("x86", "host-better", "pentium3", NULL, 0)
- when a guest CPU with mode='custom' needs to be translated into
another model because the original model is not supported by a
hypervisor, the result will have its vendor set to the vendor of the
original CPU model as specified in cpu_map.xml even if the original
guest CPU XML didn't contain <vendor/>:
DO_TEST_GUESTCPU("x86", "host", "guest", model486, 0)
DO_TEST_GUESTCPU("x86", "host", "guest", models, 0)
DO_TEST_GUESTCPU("x86", "host-Haswell-noTSX", "Haswell-noTSX",
haswell, 0)
- legacy POWERx_v* model names are not recognized:
DO_TEST_GUESTCPU("ppc64", "host", "guest-legacy", ppc_models, 0)
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In some cases preferred model doesn't really do anything since the
result remains the same even if it is removed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Using a preferred model for guest CPUs with forbidden fallback masks a
bug in the code. It would just happily use another CPU model supported
by a hypervisor even though it is explicitly forbidden in the CPU XML.
This patch temporarily changes the expected result to -2, which is used
when the result XML file cannot be found (but it was supposed not to be
found since the tested API should have failed). The result will be
switched back to -1 few commits later when the original bug gets fixed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Using a preferred CPU model which is not in the list of CPU models
supported by a hypervisor does not make sense.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Guest CPUs with match='minimum' should always be updated to match host
CPU model. Trying to get different results by supplying preferred models
does not make sense.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For machinetypes with a pci-root bus (all legacy PCI), libvirt will
make a "fake" reservation for one extra slot prior to assigning
addresses to unaddressed PCI endpoint devices in the domain. This will
trigger auto-adding of a pci-bridge for the final device to be
assigned an address *if that device would have otherwise instead been
the last device on the last available pci-bridge*; thus it assures
that there will always be at least one slot left open in the domain's
bus topology for expansion (which is important both for hotplug (since
a new pci-bridge can't be added while the guest is running) as well as
for offline additions to the config (since adding a new device might
otherwise in some cases require re-addressing existing devices, which
we want to avoid)).
It's important to note that for the above case (legacy PCI), we must
check for the special case of all slots on all buses being occupied
*prior to assigning any addresses*, and avoid attempting to reserve
the extra address in that case, because there is no free address in
the existing topology, so no place to auto-add a pci-bridge for
expansion (i.e. it would always fail anyway). Since that condition can
only be reached by manual intervention, this is acceptable.
For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's
methodology for automatically expanding the bus topology is different
- pcie-root-ports are plugged into slots (soon to be functions) of
pcie-root as needed, and the new endpoint devices are assigned to the
single slot in each pcie-root-port. This is done so that the devices
are, by default, hotpluggable (the slots of pcie-root don't support
hotplug, but the single slot of the pcie-root-port does). Since
pcie-root-ports can only be plugged into pcie-root, and we don't
auto-assign endpoint devices to the pcie-root slots, this means
topology expansion doesn't compete with endpoint devices for slots, so
we don't need to worry about checking for all "useful" slots being
free *prior* to assigning addresses to new endpoint devices - as a
matter of fact, if we attempt to reserve the open slots before the
used slots, it can lead to errors.
Instead this patch just reserves one slot for a "future potential"
PCIe device after doing the assignment for actual devices, but only
if the only PCI controller defined prior to starting address
assignment was pcie-root, and only if we auto-added at least one PCI
controller during address assignment. This assures two things:
1) that reserving the open slots will only be done when the domain is
initially defined, never at any time after, and
2) that if the user understands enough about PCI controllers that they
are adding them manually, that we don't mess up their plan by
adding extras - if they know enough to add one pcie-root-port, or
to manually assign addresses such that no pcie-root-ports are
needed, they know enough to add extra pcie-root-ports if they want
them (this could be called the "libguestfs clause", since
libguestfs needs to be able to create domains with as few
devices/controllers as possible).
This is set to reserve a single free port for now, but could be
increased in the future if public sentiment goes in that direction
(it's easy to increase later, but essentially impossible to decrease)
Real Q35 hardware has an ICH9 chip that includes several integrated
devices at particular addresses (see the file docs/q35-chipset.cfg in
the qemu source). libvirt already attempts to put the first two sets
of ich9 USB2 controllers it finds at 00:1D.* and 00:1A.* to match the
real hardware. This patch does the same for the ich9 "HD audio"
device.
The main inspiration for this patch is that currently the *only*
device in a reasonable "workstation" type virtual machine config that
requires a legacy PCI slot is the audio device, Without this patch,
the standard Q35 machine created by virt-manager will have a
dmi-to-pci-bridge and a pci-bridge just for the sound device; with the
patch (and if you change the sound device model from the default
"ich6" to "ich9"), the machine definition constructed by virt-manager
has absolutely no legacy PCI controllers - any legacy PCI devices
(e.g. video and sound) are on pcie-root as integrated devices.
Previously we added a set of EHCI+UHCI controllers to Q35 machines to
mimic real hardware as closely as possible, but recent discussions
have pointed out that the nec-usb-xhci (USB3) controller is much more
virtualization-friendly (uses less CPU), so this patch switches the
default for Q35 machinetypes to add an XHCI instead (if it's
supported, which it of course *will* be).
Since none of the existing test cases left out USB controllers in the
input XML, a new Q35 test case was added which has *no* devices, so
ends up with only the defaults always put in by qemu, plus those added
by libvirt.
Now the a dmi-to-pci-bridge is automatically added just as it's needed
(when a pci-bridge is being added), we no longer have any need to
force-add one to every single Q35 domain.
A few of the qemu test cases assume that a dmi-to-pci-bridge will
always be added at index 1, and so they omit it from the input data
even though a pci-bridge is present at index 2, e.g.:
<controller type='pci' index='0' model='pcie-root'/>
<controller type='pci' index='2' model='pci-bridge'/>
Support for this odd practice was discussed on libvir-list and we
decided that the complex code required to make this continue was not
worth the headache of maintaining. So instead, this patch modifies the
test cases to manually add a dmi-to-pci-bridge at index 1 (since an
upcoming patch is going to eliminate the unconditional adding of
dmi-to-pci-bridge).
Because the auto-add was placing the dmi-to-pci-bridge later in the
list (even though it has a lower index) the test output is also
updated to take account for the new order (which puts the pci
controllers in index-order)
Previously libvirt would only add pci-bridge devices automatically
when an address was requested for a device that required a legacy PCI
slot and none was available. This patch expands that support to
dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a
machine with a pcie-root), and pcie-root-port (which is needed to add
a hotpluggable PCIe device). It does *not* automatically add
pcie-switch-upstream-ports or pcie-switch-downstream-ports (and
currently there are no plans for that).
Given the existing code to auto-add pci-bridge devices, automatically
adding pcie-root-ports is fairly straightforward. The
dmi-to-pci-bridge support is a bit tricky though, for a few reasons:
1) Although the only reason to add a dmi-to-pci-bridge is so that
there is a reasonable place to plug in a pci-bridge controller,
most of the time it's not the presence of a pci-bridge *in the
config* that triggers the requirement to add a dmi-to-pci-bridge.
Rather, it is the presence of a legacy-PCI device in the config,
which triggers auto-add of a pci-bridge, which triggers auto-add of
a dmi-to-pci-bridge (this is handled in
virDomainPCIAddressSetGrow() - if there's a request to add a
pci-bridge we'll check if there is a suitable bus to plug it into;
if not, we first add a dmi-to-pci-bridge).
2) Once there is already a single dmi-to-pci-bridge on the system,
there won't be a need for any more, even if it's full, as long as
there is a pci-bridge with an open slot - you can also plug
pci-bridges into existing pci-bridges. So we have to make sure we
don't add a dmi-to-pci-bridge unless there aren't any
dmi-to-pci-bridges *or* any pci-bridges.
3) Although it is strongly discouraged, it is legal for a pci-bridge
to be directly plugged into pcie-root, and we don't want to
auto-add a dmi-to-pci-bridge if there is already a pci-bridge
that's been forced directly into pcie-root.
Although libvirt will now automatically create a dmi-to-pci-bridge
when it's needed, the code still remains for now that forces a
dmi-to-pci-bridge on all domains with pcie-root (in
qemuDomainDefAddDefaultDevices()). That will be removed in a future
patch.
For now, the pcie-root-ports are added one to a slot, which is a bit
wasteful and means it will fail after 31 total PCIe devices (30 if
there are also some PCI devices), but helps keep the changeset down
for this patch. A future patch will have 8 pcie-root-ports sharing the
functions on a single slot.
The nec-usb-xhci device (which is a USB3 controller) has always
presented itself as a PCI device when plugged into a legacy PCI slot,
and a PCIe device when plugged into a PCIe slot, but libvirt has
always auto-assigned it to a legacy PCI slot.
This patch changes that behavior to auto-assign to a PCIe slot on
systems that have pcie-root (e.g. Q35 and aarch64/virt).
Since we don't yet auto-create pcie-*-port controllers on demand, this
means a config with an nec-xhci USB controller that has no PCI address
assigned will also need to have an otherwise-unused pcie-*-port
controller specified:
<controller type='pci' model='pcie-root-port'/>
<controller type='usb' model='nec-xhci'/>
(this assumes there is an otherwise-unused slot on pcie-root to accept
the pcie-root-port)
The e1000e is an emulated network device based on the Intel 82574,
present in qemu 2.7.0 and later. Among other differences from the
e1000, it presents itself as a PCIe device rather than legacy PCI. In
order to get it assigned to a PCIe controller, this patch updates the
flags setting for network devices when the model name is "e1000e".
(Note that for some reason libvirt has never validated the network
device model names other than to check that there are no dangerous
characters in them. That should probably change, but is the subject of
another patch.)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1343094
libvirt previously assigned nearly all devices to a "hotpluggable"
legacy PCI slot even on machines with a PCIe root bus (and even though
most such machines don't even support hotplug on legacy PCI slots!)
Forcing all devices onto legacy PCI slots means that the domain will
need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a
pci-bridge (to provide hotpluggable legacy PCI slots which, again,
usually aren't hotpluggable anyway).
To help reduce the need for these legacy controllers, this patch tries
to assign virtio-1.0-capable devices to PCIe slots whenever possible,
by setting appropriate connectFlags in
virDomainCalculateDevicePCIConnectFlags(). Happily, when that function
was written (just a few commits ago) it was created with a
"virtioFlags" argument, set by both of its callers, which is the
proper connectFlags to set for any virtio-*-pci device - depending on
the arch/machinetype of the domain, and whether or not the qemu binary
supports virtio-1.0, that flag will have either been set to PCI or
PCIe. This patch merely enables the functionality by setting the flags
for the device to whatever is in virtioFlags if the device is a
virtio-*-pci device.
NB: the first virtio video device will be placed directly on bus 0
slot 1 rather than on a pcie-root-port due to the override for primary
video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not
to change that is a topic of discussion, but this patch doesn't change
that particular behavior.
NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root
complex) does *not* support hotplug, this means that suitable
controllers must also be in the config (i.e. either pcie-root-port, or
pcie-downstream-port). For now, libvirt doesn't add those
automatically, so if you put virtio devices in a config for a qemu
that has PCIe-capable virtio devices, you'll need to add extra
pcie-root-ports yourself. That requirement will be eliminated in a
future patch, but for now, it's simple to do this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
...
Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
The memory device alias needs to be treated as machine ABI as qemu is
using it in the migration stream for section labels. To simplify this
generate the alias from the slot number unless an existing broken
configuration is detected.
With this patch the aliases are predictable and even certain
configurations which would not be migratable previously are fixed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1359135
As with other devices assign the slot number right away when adding the
device. This will make the slot numbers static as we do with other
addressing elements and it will ultimately simplify allocation of the
alias in a static way which does not break with qemu.
Simplify handling of the 'dimm' address element by allowing to specify
the slot number only. This will allow libvirt to allocate slot numbers
before starting qemu.
Even though using /dev/shm/asdf as the backend, we still need to make
the mapping shared. The original patch forgot to add that parameter.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1392031
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Propagate the selected or default level to qemu if it's supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add QMP schema data query for aarch64. The gic capabilities are
unfortunately queried after the QMP schema and thus this patch needs to
undo the temporary removal of the declared support for query-qmp-schema.
Note that as a gicv3 machine was not available the schema data is taken
from the gicv2 case. It should be identical since qemu would be built
from the same source.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add QMP schema data query for aarch64. The gic capabilities are
unfortunately queried after the QMP schema and thus this patch needs to
undo the temporary removal of the declared support for query-qmp-schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow detecting capabilities according to the qemu QMP schema. This is
necessary as sometimes the availability of certain options depends on
the presence of a field in the schema.
This patch adds support for loading the QMP schema when detecting qemu
capabilities and adds a very simple query language to allow traversing
the schema and selecting a certain element from it.
The infrastructure in this patch uses a query path to set a specific
capability flag according to the availability of the given element in
the schema.
Remove the command from the supported commands list temporarily so that
QMP introspection code can be added without breaking tests and having to
tweak the test data in the same commit.
This will be later reverted and test data will be added. The aarch64
code is special as it calls additional commands and thus the test data
can't be added upfront.
virQEMUCapsLoadCache loads QEMU capabilities from a file, but strangely
enough it returns the loaded QEMU binary ctime in qemuctime parameter
instead of storing it in qemuCaps.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This is needed in order to migrate a domain with shmem devices as that
is not allowed to migrate.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
QEMU added support for ivshmem-plain and ivshmem-doorbell. Those are
reworked varians of legacy ivshmem that are compatible from the guest
POV, but not from host's POV and have sane specification and handling.
Details about the newer device type can be found in qemu's commit
5400c02b90bb:
http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We're keeping some things at default and that's not something we want to
do intentionally. Let's save some sensible defaults upfront in order to
avoid having problems later. The details for the defaults (of the newer
implementation) can be found in qemu's commit 5400c02b90bb:
http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb
Since we are merely saving the defaults it will not change the guest ABI
and thanks to the fact that we're doing it in the PostParse callback it
will not break the ABI stability checks.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Support for virtio disks was added in commit id 'fceeeda', but not for
SCSI drives. Add the secret for the server when hotplugging a SCSI drive.
No need to make any adjustments for unplug since that's handled during
the qemuDomainDetachDiskDevice call to qemuDomainRemoveDiskDevice in
the qemuDomainDetachDeviceDiskLive switch.
Added a test to/for the command line processing to show the command line
options when adding a SCSI drive for the guest.
https://bugzilla.redhat.com/show_bug.cgi?id=1300776
Complete the implementation of support for TLS encryption on
chardev TCP transports by adding the hotplug ability of a secret
to generate the passwordid for the TLS object for chrdev, RNG,
and redirdev.
Fix up the order of object removal on failure to be the inverse
of the attempted attach (for redirdev, chr, rng) - for each the
tls object was being removed before the chardev backend.
Likewise, add the ability to hot unplug that secret object as well
and be sure the order of unplug matches that inverse order of plug.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.
Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.
Add test for at least a serial chardev as an example.
Add in the block I/O throttling length/duration parameter to the command
line if supported. If not supported, fail command creation.
Add the xml2argvtest for testing.
Add support for a duration/length for the bps/iops and friends.
Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options
total_bytes_sec_max_length
write_bytes_sec_max_length
read_bytes_sec_max_length
total_iops_sec_max_length
write_iops_sec_max_length
read_iops_sec_max_length
Extended the qemuMonitorCPUInfo with a halted flag. Extract the halted
flag for both text and JSON monitor.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
There was inconsistency between alias used to create tls-creds-x509
object and alias used to link that object to chardev while hotpluging.
Hotplug ends with this error:
error: Failed to detach device from channel-tcp.xml
error: internal error: unable to execute QEMU command 'chardev-add':
No TLS credentials with id 'objcharchannel3_tls0'
In XML we have for example alias "serial0", but on qemu command line we
generate "charserial0".
The issue was that code, that creates QMP command to hotplug chardev
devices uses only the second alias "charserial0" and that alias is also
used to link the tls-creds-x509 object.
This patch unifies the aliases for tls-creds-x509 to be always generated
from "charserial0".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The code is entirely correct, but it still managed to trip me
up when I first ran into it because I did not realize right away
that VIR_PCI_CONNECT_TYPES_ENDPOINT was not a single flag, but
rather a mask including both VIR_PCI_CONNECT_TYPE_PCI_DEVICE and
VIR_PCI_CONNECT_TYPE_PCIE_DEVICE.
In order to save the next distracted traveler in PCI Address Land
some time, document this fact with a comment. Add a test case for
the behavior as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1357416
Rather than return a 0 or -1 and the *result string, return just the result
string to the caller. Alter all the callers to handle the different return.
As a side effect or result of this, it's much clearer that we cannot just
assign the returned string into the scsi_host wwnn, wwpn, and fabric_wwn
fields - rather we should fetch a temporary string, then as long as our
fetch was good, VIR_FREE what may have been there, and STEAL what we just got.
This fixes a memory leak in the virNodeDeviceCreateXML code path through
find_new_device and nodeDeviceLookupSCSIHostByWWN which will continually
call nodeDeviceSysfsGetSCSIHostCaps until the expected wwnn/wwpn is found
in the device object capabilities.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1366505
So far, this function lacked support for
VIR_DOMAIN_NET_TYPE_VHOSTUSER leaving callers to hack around the
problem by constructing the command line on their own. This is
not ideal as it blocks hot plug support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, what we do for vhost-user network is generate the
following part of command line:
-netdev type=vhost-user,id=hostnet0,chardev=charnet0
There's no need for 'type=' it is the default. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This improves commit 706b5b6277 in a way that we check qemu capabilities
instead of what architecture we are running on to detect whether we can
use *virtio-vga* model or not. This is not a case only for arm/aarch64.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit 21373feb added support for primary virtio-vga device but it was
checking for virtio-gpu. Let's check for existence of virtio-vga if we
want to use it.
Virtio video device is currently represented by three different models
*virtio-gpu-device*, *virtio-gpu-pci* and *virtio-vga*. The first two
models are tied together and if virtio video devices is compiled in they
both exist. However, the *virtio-vga* model doesn't have to exist on
some architectures even if the first two models exist. So we cannot
group all three together.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Before this patch we've checked qemu capabilities for video devices
only while constructing qemu command line using "-device" option.
Since we support qemu only if "-device" option is present we can use
the same capabilities to check also video devices while using "-vga"
option to construct qemu command line.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We generally uses QEMU_CAPS_DEVICE_$NAME to probe for existence of some
device and QEMU_CAPS_$NAME_$PROP to probe for existence of some property
of that device.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
