The test filled the chardev type to VIR_DOMAIN_CHR_TYPE_FILE and thus
set the 'data.emulator.source->data.file.path' pointer, but the
commandline formatter is unconditionally expecting VIR_DOMAIN_CHR_TYPE_UNIX
and thus reading 'data.emulator.source->data.nix.path'. Since it's an
union it happened to land in the correct place. Fix the faked data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainChrSourceDef' contains private data so 'virDomainChrSourceDefNew'
must be used to allocate it. 'virDomainTPMDef' was using it directly
which won't work with the chardev helper functions.
Convert it to a pointer to properly allocate private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's referenced only once and it's a shortcut to the chardev source thus
can be used directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than returning a different error code if the device address needs
to be released pass in the 'need_release' flag via a pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is already getting 'virDomainObj' which has already the
driver pointer present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to automatic memory clearing for the two virJSONValues and remove
the 'cleanup' label and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The main reason is to ensure that the private data are properly
allocated for every instance.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is already returning JSON properties, rename it
accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'virReportEnumRangeError' for the invalid cases and keep the
original error for known but unsupported chardevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the addition of the command wrapper to qemuMonitorJSONAttachCharDev
and rename the function to qemuMonitorJSONAttachCharDevGetProps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'qemuMonitorJSONMakeCommandInternal' instead of
'qemuMonitorJSONMakeCommand' + 'virJSONValueObjectAppend'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a simple wrapper for 'qemuMonitorAttachCharDev' named
'qemuHotplugChardevAttach' which will simplify the moving of the
character device property generator out of the monitor code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'xmlopt' parameter can be auto-unref by using g_autoptr().
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will enable code cleanups on code that still relies on
virObjectUnref() this pointer manually.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
x86Compute() is a static function called only by virCPUx86Compare()
which passes NULL to the 'guest' parameter of x86Compute().
The last caller of x86Compute() that used it with 'guest' != NULL
was an API called 'cpuGuestData'. This API was dropped by commit
03fa904c0c a few years ago. Since then all callers of x86Compute()
uses it with 'guest' = NULL.
Removing the 'guest' parameter allow us to remove a good chunk of
logic that isn't being used for awhile.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is no guarantee that QEMU and libvirt have been configured
with the same prefix.
In particular, Homebrew on macOS will pass a different, private
prefix for each package version and then use symlinks to make
the files for a specific version appear in the usual locations.
This works perfectly fine as long as one package doesn't try to
go poking around another package's data - which is exactly what
libvirt needs to do in order to read and parse the QEMU interop
data.
qemu_datadir can now be explicitly provided to make this and
other uncommon scenarios work. The common scenario, where QEMU
and libvirt both use the same prefix, is unaffected.
https://gitlab.com/libvirt/libvirt/-/issues/168
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use abstract names that more closely match the Meson
nomenclature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While datadir must live under prefix, there is no requirement
that its name must necessarily be "share": a different,
arbitrary name could have been provided by the user.
Fixes: 3c876d2428
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can't hardcode /usr here, because the user might have
configured whatever arbitrary prefix.
Everything appeared to be okay because when joining paths
Meson will drop any component that precedes an absolute path
and libdir happens to be absolute, but we should still do
things correctly instead of relying on this.
Fixes: 2ad009eadd
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The directory is already created by the build system, so we
don't need to create it explicitly in the spec file; moreover,
the path was incorrect, because it used datadir instead of
localstatedir.
Fixes: 4e041189f8
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 65b0b746b5 changed spice tests to use latest caps. Before this
change, "FLAG_REAL_CAPS" wasn't being set in testQemuInfoInitArgs(). The
absence of this flag triggered the code path inside
testCompareXMLToArgv() that executed testUpdateQEMUCaps(). This function
will update the host CPU via virQEMUCapsUpdateHostCPUModel() into
virQEMUCapsInitHostCPUModel(). In this function,
virQEMUCapsInitCPUModel() would end up updating the hostCPU inside the
qemuCaps (via virQEMUCapsProbeHostCPU()). Before the forementioned
commit, the host CPU was being defaulted to x86_64, vendor Intel, for
the 'graphics-spice-timeout' test that is using the 'pc' machine type
and 'accel=kvm'.
Today, "FLAG_REAL_CAPS" is being set because we're using the latest caps
from x86_64. This means that the whole code path mentioned above is
skipped. qemuCaps are now being loaded via virQEMUCapsLoadCache()
directly. Without the handling being done by testUpdateQEMUCaps(), the
host CPU is being retrieved later on, down below
qemuProcessCreatePretendCmdPrepare() into qemuProcessUpdateGuestCPU().
The latter will attempt to update the domain cpu and executing a
virCPUCompare with the hostCPU and def->cpu.
All this logic ended up causing a failure of the
'graphics-spice-timeout' test in ppc64 and s390x hosts. This test is
being run with KVM acceleration, and the KVM driver for ppc64 and s390x
will return a default x86_64 CPU with vendor "AMD", making
virCPUCompare() fail with the following message:
"QEMU XML-2-ARGV graphics-spice-timeout.x86_64-latest ... libvirt: CPU
Driver error : the CPU is incompatible with host CPU: host CPU vendor does
not match required CPU vendor Intel"
Fix this test by setting cpu check='none' and avoid the virCPUCompare()
that causes the problem for ppc64 and s390x hosts.
Note that this is a build fix. A more adequate fix would be to mock the
getHost() interface of the cpuDriverX86 for non-x86 hosts, allowing
'fullCPU' to be retrieved in qemuProcessUpdateGuestCPU(), and a proper
x86 CPU to be retrieved in the scenario described above.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We've been using the new repositories for a few months now,
but the downloads page still points to the obsolete Go packages.
Fixes: 1832c0a02b
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'-audiodev' as a modern implementation based on QAPI already takes JSON
as the argument. Convert our code to use it directly.
The declaration of the QAPI types can be found in
'qemu.git/qapi/audio.json'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The functions were obsoleted by virJSONValueObjectAdd(VArgs)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcomming patch will convert virJSONValueObjectCreate which didn't check
the value of the passed argument to virJSONValueObjectAdd which will and
this would lead to crashes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Until now the code would crash if virJSONValueObjectAdd is used without
a valid object. Adding the functionality of allocating it if it's NULL
will allow us to replace all uses of virJSONValueObjectCreate with this
single function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass in the double pointer from the wrappers directly to
virJSONValueObjectAddVArgs, which will allow us to directly allocate the
new objects inside the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the first argument to a double pointer so that later the function
can be unified with virJSONValueObjectCreate and fix all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 3210c8b04 introduced a separate field 'diskbus' for
internal use by the commandline formatter.
Adjust the check for address equality to compare the relevant
fields separately instead of the whole struct.
This means that the changes of the 'diskbus' field added
in commit 03ed14d2d4 no longer affect the outcome of the address
equality check.
https://bugzilla.redhat.com/show_bug.cgi?id=2023605
Fixes: 3210c8b047
Fixes: 03ed14d2d4
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently translated at 22.4% (2347 of 10441 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/pl/
Co-authored-by: Piotr Drąg <piotrdrag@gmail.com>
Signed-off-by: Piotr Drąg <piotrdrag@gmail.com>
The upcoming QEMU 6.2.0 implements a new event called
DEVICE_UNPLUG_GUEST_ERROR, a new event that reports generic device
unplug errors that were detected by the guest and reported back to QEMU.
This new event is going to be specially useful for pseries guests that
uses newer kernels (must have kernel commit 29c9a2699e71), which is the
case for Fedora 34 at this moment. These guests have the capability of
reporting CPU removal errors back to QEMU which, starting in 6.2.0, will
emit the DEVICE_UNPLUG_GUEST_ERROR event. Libvirt can use this event to
abort the device removal immediately instead of waiting for 'setvcpus'
timeout.
QEMU 6.2.0 is also going to emit DEVICE_UNPLUG_GUEST_ERROR for memory
hotunplug errors, both in pseries and ACPI guests. QEMU 6.1.0 reports
memory removal errors using the MEM_UNPLUG_ERROR event, which is going to
be deprecated by DEVICE_UNPLUG_GUEST_ERROR in 6.2.0. Given that
Libvirt wasn't handling the MEM_UNPLUG_ERROR event we don't need to
worry about it - adding support to DEVICE_UNPLUG_GUEST_ERROR will be
enough to cover all future cases.
This patch adds support to DEVICE_UNPLUG_GUEST_ERROR by adding the
minimal wiring required for Libvirt to be aware of it. The monitor
callback for this event will abort the pending removal operation of the
device reported by the "device" property of the event. Most of the heavy
lifting is already done by existing code that handles
QEMU_DOMAIN_UNPLUGGING_DEVICE_STATUS_GUEST_REJECTED, making our life
easier to abort the pending removal operation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch updates domaincapsdata and qemucapabilitiesdata for ppc64
with qemu commit v6.1.0-1714-gc5b2f55981.
Changes in all 'ppc64-latest.ags' files were needed. The changes are
mundane despite the volume. For all 'ppc64-latest.args' files the
changes are:
- removing '-sandbox' command line;
- 'secret' and 'memory-backend-ram' objects are now using qom-type format;
- '-device' is now using qom-type format.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
