Commit Graph

995 Commits

Author SHA1 Message Date
Peter Krempa
b560946c19 storage: Add gluster pool filter and fix virsh pool listing
Recent addition of the gluster pool type omitted fixing the virsh and
virConnectListAllStoragePool filters. A typecast of the converting
function in virsh showed that also the sheepdog pool was omitted in the
command parser.

This patch adds gluster pool filtering support and fixes virsh to
properly convert all supported storage pool types. The added typecast
should avoid doing such mistakes in the future.
2013-12-19 11:01:50 +01:00
Cédric Bosdonnat
9ff38c5428 Added Network events API and virNetworkEventLifecycle.
Define the public API for (de-)registering network events
and the callbacks for receiving lifecycle events. The lifecycle
event includes a 'detail' parameter to match the domain lifecycle
event data, but this is currently unused.

The network events related code goes into its own set of internal
files src/conf/network_event.[ch]
2013-12-11 13:10:41 +00:00
Chen Hanxiao
fb2125902f docs: fix a typo in libvirt.h
s/pausde/paused

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2013-12-11 13:36:35 +01:00
Eric Blake
99f7b63568 docs: fix typo in previous patch
Avoid a nested comment compilation error, caused by me editing
Chen's patch.

* include/libvirt/libvirt.h.in: Fix typo.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-02 11:27:37 -07:00
Chen Hanxiao
c268af2e9a docs: fix typos in libvirt.h.in
s/causes/cause/

Each event callback has a single detail parameter, and can
thus only report a single cause.  Also, make all the sub-event
documentation use similar wording.

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-02 10:11:11 -07:00
Chen Hanxiao
d3572bb7b4 docs: fix typos in libvirt.h.in
s/caused/causes

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2013-12-02 10:50:27 +08:00
Eric Blake
ecd881b7a7 storage: add network-dir as new storage volume type
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory.  But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch.  Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).

* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-25 12:29:49 -07:00
Doug Goldstein
6ce83e91e6 Macro for testing the version you are compiling with
Added a macro similar to the GLib's GLIB_CHECK_VERSION so that one can
simply do something like:

 #if LIBVIR_CHECK_VERSION(1,1,3)
   /* Call function here that appeared in 1.1.3 and newer */
   virSomeNewFunction();
 #endif
2013-11-18 11:53:18 -06:00
Eric Blake
6385283add docs: improve job info details
Noticed while revieweing the patches for qemu's new migration state.

* include/libvirt/libvirt.h.in (_virDomainJobInfo): Fix typo,
grammar.
* src/libvirt.c (virDomainGetJobInfo): Add cross reference.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-15 06:00:49 -07:00
Chen Hanxiao
0a85160f26 docs: fix typos in libvirt.h.in
s/repersents/represents

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2013-11-11 08:28:46 -07:00
Eric Blake
d0b2d0177b docs: grammar fixes
Fix some user-visible wording from commits 72aafe9 and 1606d89.

* src/qemu/qemu.conf (migration_address): Better wording.
* include/libvirt/libvirt.h.in (VIR_MIGRATE_PARAM_LISTEN_ADDRESS):
Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-08 10:37:06 -07:00
Eric Blake
a5da542360 maint: avoid 'const fooPtr' in public API
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can).  But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).

Fix up offenders in the public API.  Note that this is an API change;
but see commit 6ac6f59, where we first argued that this change is
harmless (but with that commit not actually making the change that it
claimed to be making):

    Although this is an API change (not ABI though), real callers won't be
    impacted. Why?
     1. these callback members are read-only, so it is less likely that
    someone is trying to assign into the struct members.
     2. The only way to register a virConnectDomainEventGraphicsCallback is
    to cast it through a call to virConnectDomainEventRegisterAny.  That is,
    even if the user's callback function leaves out the const, we never use
    the typedef as the direct type of any API parameter.  Since they are
    already casting their function pointer into a munged type before
    registering it, their code will continue to compile.

* include/libvirt/libvirt.h.in
(virConnectDomainEventGraphicsCallback): Use intended type.
2013-10-14 10:56:20 -06:00
Michal Privoznik
72aafe9c81 Migration: Introduce VIR_MIGRATE_PARAM_LISTEN_ADDRESS
The parameter allows overriding default listen address for '-incoming'
cmd line argument on destination.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-11 10:51:36 +02:00
Michal Privoznik
4b744d7d00 virerror: s/VIR_ERR_STORAGE_VOL_EXISTS/VIR_ERR_STORAGE_VOL_EXISTS/
We currently have other error codes in singular form, e.g.
VIR_ERR_NETWORK_EXIST. Cleanup the previous patch to match the form.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-07 19:21:47 +02:00
Hongwei Bi
91875896d5 fix a ambiguous output of the command:'virsh vol-create-as'
I created a storage volume(eg: test) from a storage pool(eg:vg10) using
the following command:"virsh vol-create-as --pool vg10 --name test --capacity 300M."
When I re-executed the above command, the output was as the following:
"error: Failed to create vol test
 error: Storage volume not found: storage vol 'test' already exists"

I think the output "Storage volume not found" is not appropriate. Because in fact storage
vol test has been found at this time. And then I think virErrorNumber should includes
VIR_ERR_STORAGE_EXIST which can also be used elsewhere. So I make this patch. The result
is as following:
"error: Failed to create vol test
 error: storage volume 'test' exists already"
2013-10-07 18:26:09 +02:00
Giuseppe Scrivano
f90857b32a libvirt: add new public API virConnectGetCPUModelNames
The new function virConnectGetCPUModelNames allows to retrieve the list
of CPU models known by the hypervisor for a specific architecture.

Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-23 15:41:50 -06:00
Jonathan Lebon
b8e4644d1a docs: fix virEventAddHandle return details
In commit 6d41cb8, the interface for virEventAddHandleFunc was changed.
This patch updates the documentation for virEventAddHandle to reflect
the new significance of the return value. Also, both functions now
mention -1 for failure.
2013-09-18 13:06:13 -06:00
Don Dugger
d4952d36d0 Add flag to BaselineCPU API to return detailed CPU features
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model.  This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.

Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-16 15:31:18 -06:00
Guannan Ren
8a160f11af qemu: support to drop disk with 'optional' startupPolicy
Go through disks of guest, if one disk doesn't exist or its backing
chain is broken, with 'optional' startupPolicy, for CDROM and Floppy
we only discard its source path definition in xml, for disks we drop
it from disk list and free it.
2013-08-07 15:11:15 +08:00
Daniel P. Berrange
63d261f395 Rename VIR_DOMAIN_PAUSED_GUEST_PANICKED to VIR_DOMAIN_PAUSED_CRASHED
The VIR_DOMAIN_PAUSED_GUEST_PANICKED constant is badly named,
leaking the QEMU event name. Elsewhere in the API we use
'CRASHED' rather than 'PANICKED', and the addition of 'GUEST'
is redundant since all events are guest related.

Thus rename it to VIR_DOMAIN_PAUSED_CRASHED, which matches
with VIR_DOMAIN_RUNNING_CRASHED and VIR_DOMAIN_EVENT_CRASHED.

It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to rename before 1.1.1

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-29 18:08:55 +01:00
Daniel P. Berrange
8c20d3f8e7 Remove VIR_DOMAIN_SHUTDOWN_CRASHED from public API
The VIR_DOMAIN_SHUTDOWN_CRASHED state constant does not appear
to be used in the QEMU code anyway. It also doesn't make much
(any) sense, since the 'shutdown' state is a transient state
between 'running' and 'shutoff' and when a guest crashes, it
does not end up in a 'shutdown' state, only 'shutoff'.

It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to remove before 1.1.1

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-29 18:08:55 +01:00
Daniel P. Berrange
dff93f8cab Add API for calling systemd-machined's DBus API
To register virtual machines and containers with systemd-machined,
and thus have cgroups auto-created, we need to talk over DBus.
This is somewhat tedious code, so introduce a dedicated function
to isolate the DBus call in one place.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-22 13:09:58 +01:00
Daniel P. Berrange
834c9c9459 Introduce virDBusCallMethod & virDBusMessageRead methods
Doing DBus method calls using libdbus.so is tedious in the
extreme. systemd developers came up with a nice high level
API for DBus method calls (sd_bus_call_method). While
systemd doesn't use libdbus.so, their API design can easily
be ported to libdbus.so.

This patch thus introduces methods virDBusCallMethod &
virDBusMessageRead, which are based on the code used for
sd_bus_call_method and sd_bus_message_read. This code in
systemd is under the LGPLv2+, so we're license compatible.

This code is probably pretty unintelligible unless you are
familiar with the DBus type system. So I added some API
docs trying to explain how to use them, as well as test
cases to validate that I didn't screw up the adaptation
from the original systemd code.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-22 13:09:58 +01:00
Jiri Denemark
4421e257dd Add VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED event 2013-07-18 15:28:45 +02:00
Daniel P. Berrange
d76227bea3 Introduce new domain create APIs to pass pre-opened FDs to LXC
With container based virt, it is useful to be able to pass
pre-opened file descriptors to the container init process.
This allows for containers to be auto-activated from incoming
socket connections, passing the active socket into the container.

To do this, introduce a pair of new APIs, virDomainCreateXMLWithFiles
and virDomainCreateWithFiles, which accept an array of file
descriptors. For the LXC driver, UNIX file descriptor passing
will be used to send them to libvirtd, which will them pass
them down to libvirt_lxc, which will then pass them to the container
init process.

This will only be implemented for LXC right now, but the design
is generic enough it could work with other hypervisors, hence
I suggest adding this to libvirt.so, rather than libvirt-lxc.so

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-18 11:01:14 +01:00
John Ferlan
d5c67e7f45 Add new public API virDomainSetMemoryStatsPeriod
Add new API in order to set the balloon memory driver statistics collection
period in order to allow dynamic period adjustment for the virsh dommemstats to
display balloon stats data
2013-07-16 08:44:53 -04:00
Chen Fan
14e7e0ae8d libvirt: Define domain crash event types
This patch introduces domain crashed types and crashed reasons which
will be used while guest panicked.
2013-07-02 12:02:27 -06:00
Jiri Denemark
4669543cb8 Introduce VIR_MIGRATE_PARAM_GRAPHICS_URI parameter
The parameter specifies connection parameters to use for migrating
client's connection to domain's graphical console.
2013-06-25 01:33:47 +02:00
Jiri Denemark
4bf62f44a9 Extensible migration APIs
This patch introduces two new APIs virDomainMigrate3 and
virDomainMigrateToURI3 that may be used in place of their older
variants. These new APIs take optional migration parameters (such as
bandwidth, domain XML, ...) in an array of virTypedParameters, which
makes adding new parameters easier as there's no need to introduce new
APIs whenever a new migration parameter needs to be added. Both APIs are
backward compatible and will automatically use older migration calls in
case the new calls are not supported as long as the typed parameters
array does not contain any parameter which was not supported by the
older calls.
2013-06-25 01:24:53 +02:00
Jiri Denemark
81709832ab Introduce migration parameters
To be used by new migration APIs with extensible set of parameters.
2013-06-25 00:38:25 +02:00
Daniel P. Berrange
a93cd08fd5 Define basic internal API for access control
This patch introduces the virAccessManagerPtr class as the
interface between virtualization drivers and the access
control drivers. The viraccessperm.h file defines the
various permissions that will be used for each type of object
libvirt manages

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-06-24 15:24:36 +01:00
Peter Krempa
cf6d56ac43 migration: Make erroring out on I/O error controllable by flag
Paolo Bonzini pointed out that it's actually possible to migrate a qemu
instance that was paused due to I/O error and it will be able to work on
the destination if the storage is accessible.

This patch introduces flag VIR_MIGRATE_ABORT_ON_ERROR that cancels the
migration in case an I/O error happens while it's being performed and
allows migration without this flag. This flag can be possibly used for
other error reasons that may be introduced in the future.
2013-06-18 14:52:26 +02:00
Osier Yang
4a7b3e58bd nodedev: Support SCSI_GENERIC cap flag for listAllNodeDevices 2013-06-18 17:20:03 +08:00
Peter Krempa
c2093b2aba Fix commit 29c1e913e4
This patch fixes changes done in commit 29c1e913e4
that was pushed without implementing review feedback.

The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and
documentation makes the difference between regular hotplug and this new
functionality more explicit.

The virsh options that enable the use of the new flag are changed to
"--guest" and the documentation is fixed too.
2013-06-10 09:52:49 +02:00
Peter Krempa
29c1e913e4 API: Introduce VIR_DOMAIN_VCPU_AGENT, for agent based CPU hot(un)plug
This flag will allow to use qemu guest agent commands to disable
(offline) and enable (online) processors in a live guest that has the
guest agent running.
2013-06-07 15:58:25 +02:00
Michal Privoznik
6ac6f59c98 Change virConnectDomainEventGraphicsCallback signature
For future work we need _virDomainEventGraphicsAddress and
_virDomainEventGraphicsSubjectIdentity members to be char * not const
char *. We are strdup()-ing them anyway, so they should have been char *
anyway (from const correctness POV). However, we don't want users to
change passed values, so we need to make the callback's argument const.

Although this is an API change (not ABI though), real callers won't be
impacted. Why?
 1. these callback members are read-only, so it is less likely that
someone is trying to assign into the struct members.
 2. The only way to register a virConnectDomainEventGraphicsCallback is
to cast it through a call to virConnectDomainEventRegisterAny.  That is,
even if the user's callback function leaves out the const, we never use
the typedef as the direct type of any API parameter.  Since they are
already casting their function pointer into a munged type before
registering it, their code will continue to compile.
2013-05-22 18:53:59 +02:00
Eric Blake
d7f53c7b97 maint: use LGPL correctly
Several files called out COPYING or COPYING.LIB instead of using
the normal boilerplate.  It's especially important that we don't
call out COPYING from an LGPL file, since COPYING is traditionally
used for the GPL.  A few files were lacking copyright altogether.

* src/rpc/gendispatch.pl: Add missing copyright.
* Makefile.nonreentrant: Likewise.
* src/check-symfile.pl: Likewise.
* src/check-symsorting.pl: Likewise.
* src/driver.h: Likewise.
* src/internal.h: Likewise.
* tools/libvirt-guests.sh.in: Likewise.
* tools/virt-pki-validate.in: Mention copyright in comment, not just code.
* tools/virt-sanlock-cleanup.in: Likewise.
* src/rpc/genprotocol.pl: Spell out license terms.
* src/xen/xend_internal.h: Likewise.
* src/xen/xend_internal.c: Likewise.
* Makefile.am: Likewise.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* docs/schemas/Makefile.am: Likewise.
* examples/apparmor/Makefile.am: Likewise.
* examples/domain-events/events-c/Makefile.am: Likewise.
* examples/dominfo/Makefile.am: Likewise.
* examples/domsuspend/Makefile.am: Likewise.
* examples/hellolibvirt/Makefile.am: Likewise.
* examples/openauth/Makefile.am: Likewise.
* examples/python/Makefile.am: Likewise.
* examples/systemtap/Makefile.am: Likewise.
* examples/xml/nwfilter/Makefile.am: Likewise.
* gnulib/lib/Makefile.am: Likewise.
* gnulib/tests/Makefile.am: Likewise.
* include/Makefile.am: Likewise.
* include/libvirt/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* python/tests/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
* configure.ac: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-20 14:03:48 -06:00
Daniel P. Berrange
69c6a58a1d Add a virGetLastErrorMessage() function
Apps using libvirt will often have code like

   if (virXXXX() < 0) {
      virErrorPtr err = virGetLastError();
      fprintf(stderr, "Something failed: %s\n",
              err && err->message ? err->message :
              "unknown error");
      return -1;
   }

Checking for a NULL error object or message leads to very
verbose code. A virGetLastErrorMessage() helper from libvirt
can simplify this to

   if (virXXXX() < 0) {
      fprintf(stderr, "Something failed: %s\n",
              virGetLastErrorMessage());
      return -1;
   }

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-10 19:57:18 +01:00
Laine Stump
353941961a hypervisor api: new virNodeDeviceDetachFlags
The existing virNodeDeviceDettach() assumes that there is only a
single PCI device assignment backend driver appropriate for any
hypervisor. This is no longer true, as the qemu driver is getting
support for PCI device assignment via VFIO. The new API
virNodeDeviceDetachFlags adds a driverName arg that should be set to
the exact same string set in a domain <hostdev>'s <driver name='x'/>
element (i.e. "vfio", "kvm", or NULL for default). It also adds a
flags arg for good measure (and because it's possible we may need it
when we start dealing with VFIO's "device groups").
2013-04-25 21:28:10 -04:00
Christophe Fergeau
09c9395a59 Fix VIR_DOMAIN_EVENT_ID_PMSUSPEND capitalization in API doc
It was written VIR_DOMAIN_EVENT_ID_PMSuspend
2013-04-25 21:57:19 +02:00
Osier Yang
9969ade669 syntax-check: Only allows to include public headers in external tools
With this patch, include public headers in "" form is only allowed
for "internal.h". And only the external tools (examples|tools|python
|include/libvirt) can include the public headers in <> form.
2013-04-18 11:31:19 +08:00
Daniel P. Berrange
1da631ecf3 Add an API for re-mounting cgroups, to isolate the process location
Add a virCgroupIsolateMount method which looks at where the
current process is place in the cgroups (eg /system/demo.lxc.libvirt)
and then remounts the cgroups such that this sub-directory
becomes the root directory from the current process' POV.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:32 +01:00
Osier Yang
652a2ec630 nodedev: Introduce two new flags for listAll API
VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST to filter the FC HBA,
and VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS to filter the FC HBA
which supports vport.
2013-03-25 20:46:05 +08:00
Paolo Bonzini
adba070122 secret: add iscsi to possible usage types
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:23 +08:00
Daniel P. Berrange
3aabe27247 Define internal APIs for managing identities
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-19 13:37:37 +00:00
Daniel P. Berrange
e4e69e899e Apply security label when entering LXC namespaces
Add a new virDomainLxcEnterSecurityLabel() function as a
counterpart to virDomainLxcEnterNamespaces(), which can
change the current calling process to have a new security
context. This call runs client side, not in libvirtd
so we can't use the security driver infrastructure.

When entering a namespace, the process spawned from virsh
will default to running with the security label of virsh.
The actual desired behaviour is to run with the security
label of the container most of the time. So this changes
virsh lxc-enter-namespace command to invoke the
virDomainLxcEnterSecurityLabel method.

The current behaviour is:

LABEL                             PID TTY          TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 29 ? 00:00:00 dhclient
staff_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 47 ? 00:00:00 ps

Note the ps command is running as unconfined_t,  After this patch,

The new behaviour is this:

virsh -c lxc:/// lxc-enter-namespace dan -- /bin/ps -eZ
LABEL                             PID TTY          TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 32 ? 00:00:00 dhclient
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 38 ? 00:00:00 ps

The '--noseclabel' flag can be used to skip security labelling.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-13 15:16:37 +00:00
Jiri Denemark
34f44e911f Introduce virDomainMigrate*CompressionCache APIs
Introduce virDomainMigrateGetCompressionCache and
virDomainMigrateSetCompressionCache APIs.
2013-02-22 17:35:59 +01:00
Jiri Denemark
4dd00f4238 Introduce virDomainGetJobStats API
This is an extensible version of virDomainGetJobInfo.
2013-02-22 17:35:58 +01:00
Jiri Denemark
ecfff1dab3 Introduce VIR_MIGRATE_COMPRESSED flag
This flag may be used with migration APIs to request compression of
migration data.
2013-02-22 17:35:58 +01:00
Osier Yang
efed366eb7 Introduce API virNodeDeviceLookupSCSIHostByWWN
Since the name (like scsi_host10) is not stable for vHBA, (it can
be changed either after recreating or system rebooting), current
API virNodeDeviceLookupByName is not nice to use for management app
in this case. (E.g. one wants to destroy the vHBA whose name has
been changed after system rebooting, he has to find out current
name first).

Later patches will support the persistent vHBA via storage pool,
with which one can identify the vHBA stably by the wwnn && wwpn
pair.

So this new API comes.
2013-02-12 00:23:57 +08:00
Claudio Bley
d706bdf918 libvirt.h.in: document virConnectDomainEventCallback's return value 2013-02-01 08:47:04 +01:00
Claudio Bley
91ecc7dd87 libvirt.h.in: add missing return doc for virEventRemoveHandleFunc 2013-02-01 08:47:04 +01:00
Claudio Bley
a7defab6d7 libvirt.h.in: fix documentation for virConnectDomainEventBlockJobCallback
In commit 3ac26e2645 parameter "path" was
renamed to "disk" but this change was not reflected in the documentation.

Additionally, documentation of the "opaque" parameter was missing.
2013-02-01 08:47:04 +01:00
Claudio Bley
4247e4e5c1 libvirt.h.in: add missing documentation for virConnectCloseFunc 2013-02-01 08:47:04 +01:00
Claudio Bley
8f7b75fbc3 fix typos in comments for VIR_DOMAIN_PROCESS_SIGNAL_{PWR,SYS} 2013-01-22 16:58:42 +01:00
Jiri Denemark
de78bf604c Introduce virTypedParamsClear public API
The function is just a renamed public version of former
virTypedParameterArrayClear.
2013-01-18 15:04:00 +01:00
Jiri Denemark
54dd75fd97 Add virTypedParams* APIs
Working with virTypedParameters in clients written in C is ugly and
requires all clients to duplicate the same code. This set of APIs makes
this code for manipulating with virTypedParameters integral part of
libvirt so that all clients may benefit from it.
2013-01-18 15:03:58 +01:00
Claudio Bley
ed1384dc38 Move comments after enum members
The api builder always associates comments to the last member it read,
not to the current member even if there was a comment for the previous
member and a comma was already seen.

This has the effect that the comment for the previous member gets
overwritten and the current member has no comment at all.
2013-01-17 12:35:31 +01:00
Daniel P. Berrange
3d1596b048 Introduce an LXC specific public API & library
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.

The actual APIs are

  int virDomainLxcOpenNamespace(virDomainPtr domain,
                                int **fdlist,
                                unsigned int flags);

  int virDomainLxcEnterNamespace(virDomainPtr domain,
                                 unsigned int nfdlist,
                                 int *fdlist,
                                 unsigned int *noldfdlist,
                                 int **oldfdlist,
                                 unsigned int flags);

which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.

NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:58:34 +00:00
Michal Privoznik
ab2615237a libvirt.h.in: Fix indentation
With the most recent patch from Claudio, I realized how many
indentation flaws we have in the libvirt.h.in file. Even though
they are harmless, it's still worth fixing them.
2013-01-10 13:49:09 +01:00
Claudio Bley
4ecd7caf5c Fix wrong indentation for virDomainState 2013-01-10 12:46:20 +01:00
John Eckersberg
d52add46ed api: Add API to tunnel a guest channel via stream
This patch adds a new API, virDomainOpenChannel, that uses streams to
connect to a virtio channel on a guest.  This creates a secure
communication channel between a guest and a libvirt client.

This behaves the same as virDomainOpenConsole, except on channels
instead of console/serial/parallel devices.
2013-01-04 17:10:55 -07:00
Osier Yang
91b749a0ac Fix the comment grammar 2013-01-02 23:29:20 +08:00
Osier Yang
c898c7b3d8 Remove the inexistent function in comments
virNodeDeviceLookupByKey is inexistent.
2013-01-02 22:42:44 +08:00
liguang
8b9bf7879b Add support for offline migration
Offline migration transfers inactive definition of a domain (which may
or may not be active). After successful completion, the domain remains
in its current state on source host and is defined but inactive on
destination host. It's a bit more clever than virDomainGetXMLDesc() on
source host followed by virDomainDefineXML() on destination host, as
offline migration will run pre-migration hook to update the domain XML
on destination host. Currently, copying non-shared storage is not
supported during offline migration.

Offline migration can be requested with a new migration flag called
VIR_MIGRATE_OFFLINE (which has to be combined with
VIR_MIGRATE_PERSIST_DEST flag).
2012-12-10 21:52:15 +01:00
Ján Tomko
1c9a2fb1ae storage: allow metadata preallocation when creating qcow2 images
Add VIR_STORAGE_VOL_CREATE_PREALLOC_METADATA flag to virStorageVolCreateXML
and virStorageVolCreateXMLFrom. This flag requests metadata
preallocation when creating/cloning qcow2 images, resulting in creating
a sparse file with qcow2 metadata. It has only slightly larger disk usage
compared to new image with no allocation, but offers higher performance.
2012-12-07 11:46:48 +01:00
Daniel P. Berrange
76d9f65644 Introduce two new methods for triggering controlled shutdown/reboot
The virDomainShutdownFlags and virDomainReboot APIs allow the caller
to request the operation is implemented via either acpi button press
or a guest agent. For containers, a couple of other methods make
sense, a message to /dev/initctl, and direct kill(SIGTERM|HUP) of
the container init process.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-30 19:19:38 +00:00
Daniel P. Berrange
c4ef575c97 Add APIs for talking to init via /dev/initctl
To be able todo controlled shutdown/reboot of containers an
API to talk to init via /dev/initctl is required. Fortunately
this is quite straightforward to implement, and is supported
by both sysvinit and systemd. Upstart support for /dev/initctl
is unclear.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-30 19:17:30 +00:00
Daniel P. Berrange
46c329bcc5 Add virDomainSendProcessSignal API
Add an API for sending signals to arbitrary processes in the
guest OS. This is primarily useful for container based virt,
but can be used for machine virt too, if there is a suitable
guest agent,

* include/libvirt/libvirt.h.in: Add virDomainSendProcessSignal
  and virDomainProcessSignal enum
* src/driver.h: Driver entry point
* src/libvirt.c, src/libvirt_public.syms: Impl for new API

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-29 15:50:12 +00:00
Michal Privoznik
0fbf3704fd Introduce virDomainFSTrim() public API
This will call FITRIM within guest. The API has 4 arguments,
however, only 2 will be used for now (@dom and @minumum).
The rest two are there if in future qemu guest agent learns them.
2012-11-28 16:15:01 +01:00
Eric Blake
e9028f4b73 snapshot: add two more filter sets to API
As we enable more modes of snapshot creation, it becomes more important
to be able to quickly filter based on snapshot properties.  This patch
introduces new filter flags; subsequent patches will introduce virsh
back-compat filtering, as well as actual libvirt filtering.

* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add
five new flags in two new groups.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainListAllSnapshots, virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames)
(virDomainSnapshotListAllChildren): Document them.
* src/conf/snapshot_conf.h (VIR_DOMAIN_SNAPSHOT_FILTERS_STATUS)
(VIR_DOMAIN_SNAPSHOT_FILTERS_LOCATION): Add new convenience filter
collection macros.
* tools/virsh-snapshot.c (cmdSnapshotList): Add 5 new flags.
* tools/virsh.pod (snapshot-list): Document them.
2012-11-19 08:43:00 -07:00
Peter Krempa
9576afd110 nodeinfo: Add check and workaround to guarantee valid cpu topologies
Lately there were a few reports of the output of the virsh nodeinfo
command being inaccurate. This patch tries to avoid that by checking if
the topology actually makes sense. If it doesn't we then report a
synthetic topology that indicates to the user that the host capabilities
should be checked for the actual topology.
2012-11-13 00:35:29 +01:00
Michal Privoznik
adb29a8869 Introduce new VIR_DOMAIN_EVENT_SUSPENDED_API_ERROR event
This is supposed to be thrown every time we need to pause domain
because of API execution (e.g. qemuDomainSaveInternal) but fails
to restore it back after. In this case, domain remains paused,
however, none of existing reasons can fit this scenario.
2012-11-07 12:06:05 +01:00
Peter Krempa
5f75bd4bbe snapshot: Add flag to enable creating checkpoints in live state
The default behavior while creating external checkpoints is to pause the
guest while the memory state is captured. We want the users to sacrifice
space saving for creating the memory save image while the guest is live
to minimize downtime.

This patch adds a flag that causes the guest not to be paused before
taking the snapshot.
 *include/libvirt/libvirt.h.in:
    - add new paused reason: VIR_DOMAIN_PAUSED_SNAPSHOT
    - add new flag for taking snapshot: VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
 *tools/virsh-domain-monitor.c:
    - add string representation for VIR_DOMAIN_PAUSED_SNAPSHOT
 *tools/virsh-snapshot.c:
    - add support for VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
 *tools/virsh.pod:
    - add docs for --live option added to use
    VIR_DOMAIN_SNAPSHOT_CREATE_LIVE flag
2012-11-03 14:43:01 +01:00
Eric Blake
edecd45c78 blockjob: return appropriate event and info
Handle the new type of block copy event and info.  Of course,
this patch does nothing until a later patch actually allows the
creation/abort of a block copy job.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_JOB_READY): New
block job status.
* src/libvirt.c (virDomainBlockRebase): Document the event.
* src/qemu/qemu_monitor_json.c (eventHandlers): New event.
(qemuMonitorJSONHandleBlockJobReady): New function.
(qemuMonitorJSONGetBlockJobInfoOne): Translate new job type.
(qemuMonitorJSONHandleBlockJobImpl): Handle new event and job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Recognize
the event to minimize snooping.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Snoop a successful
info query to save effort on a pivot request.
2012-10-27 07:43:38 -06:00
Viktor Mihajlovski
d39291d4c0 libvirt.h.in: Add new cpumap macro VIR_CPU_USED
New macro VIR_CPU_USED added to facilitate the interpretation of
cpu maps.
Further, hardened the other cpumap macros against invocations
like VIR_CPU_USE(cpumap + 1, cpu)

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2012-10-23 18:48:04 -06:00
Viktor Mihajlovski
7ecc1d814a virNodeGetCPUMap: Define public API.
Adding a new API to obtain information about the
host node's present, online and offline CPUs.

int virNodeGetCPUMap(virConnectPtr conn,
                     unsigned char **cpumap,
                     unsigned int *online,
                     unsigned int flags);

The function will return the number of CPUs present on the host
or -1 on failure;
If cpumap is non-NULL virNodeGetCPUMap will allocate an array
containing a bit map representation of the online CPUs. It's
the callers responsibility to deallocate cpumap using free().
If online is non-NULL, the variable pointed to will contain
the number of online host node CPUs.
The variable flags has been added to support future extensions
and must be set to 0.

Extend the driver structure by nodeGetCPUMap entry in support of the
new API virNodeGetCPUMap.
Added implementation of virNodeGetCPUMap to libvirt.c

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2012-10-23 18:46:47 -06:00
Eric Blake
5a2e1185bd header: declare node memory parameter handling earlier
Commit 12ad7435 added new functions (virNodeGetMemoryParameters,
virNodeSetMemoryParameters) into the section of the file reserved
for deprecated names.  Fix this by moving things earlier; split
into two patches to make git diff easier to read.

* include/libvirt/libvirt.h.in: Move virNodeGetMemoryParameters
and friends earlier, add a note to prevent relapse.
2012-10-23 14:32:46 -06:00
Eric Blake
86e78667b8 header: declare typed parameter handling earlier
Commit 12ad7435 added new functions (virNodeGetMemoryParameters,
virNodeSetMemoryParameters) into the section of the file reserved
for deprecated names.  Fix this by moving things earlier; split
into two patches to make git diff easier to read.

* include/libvirt/libvirt.h.in: Move virTypedParameter earlier.
2012-10-23 14:32:45 -06:00
Daniel P. Berrange
eca72d4759 Introduce an internal API for handling file based lockspaces
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence

  threadA: fd1 = open("foo")
  threadB: fd2 = open("foo")
  threadA: virFileLock(fd1)
  threadB: virFileLock(fd2)
  threadB: close(fd2)

you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.

To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace".  This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.

NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.

eg to lock /var/lib/libvirt/images/foo.img the application
might do

   virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
   lockname = md5sum("/var/lib/libvirt/images/foo.img");
   virLockSpaceAcquireLock(lockspace, lockname);

NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.

It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg

   virLockSpacePtr lockspace = virLockSpaceNew(NULL);
   virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");

This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-10-16 15:45:55 +01:00
Martin Kletzander
7ba5defb5a Add support for SUSPEND_DISK event
This patch adds support for SUSPEND_DISK event; both lifecycle and
separated.  The support is added for QEMU, machines are changed to
PMSUSPENDED, but as QEMU sends SHUTDOWN afterwards, the state changes
to shut-off.  This and much more needs to be done in order for libvirt
to work with transient devices, wake-ups etc.  This patch is not
aiming for that functionality.
2012-10-15 12:09:10 +02:00
Osier Yang
f81f0f2f1d node_memory: Add new parameter field to tune the new sysfs knob
Upstream kernel introduced new sysfs knob "merge_across_nodes" to
specify if pages from different numa nodes can be merged. When set
to 0, only pages which physically reside in the memory area of
same NUMA node can be merged. When set to 1, pages from all nodes
can be merged.

This patch supports the tuning by adding new param field
"shm_merge_across_nodes".
2012-10-15 17:35:54 +08:00
Ján Tomko
149c87b49d Various typos and misspellings 2012-10-12 00:03:43 +02:00
Jiri Denemark
28f8dfdccc Add MIGRATABLE flag for virDomainGetXMLDesc
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.

This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
2012-10-11 15:11:42 +02:00
Daniel P. Berrange
6a7b663203 Fix typo in header file comment
s/mmeory/memory/ in libvirt.h.in

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-26 10:38:45 +01:00
Eric Blake
4ecb723b9e maint: fix up copyright notice inconsistencies
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/
2012-09-20 16:30:55 -06:00
Laine Stump
01ab659994 network: fix incorrect VIR_NETWORK_UPDATE_COMMAND_* values
These enums originally were put into the flags for virNetworkUpdate,
and when they were moved into their own enum, the numbers weren't
appropriately changed, causing the commands to start with value 2
instead of 1. This causes problems for things like ENUM_IMPL, which
wants a string for every value in the requested range, including those
not used in the enum.
2012-09-19 10:39:31 -04:00
Laine Stump
574b9bc66b network: define new API virNetworkUpdate
This patch adds a new public API virNetworkUpdate that will permit
updating an existing network configuration without requiring that the
network be destroyed/restarted for the changes to take effect.
2012-09-18 04:21:32 -04:00
Eric Blake
ef1e024df8 blockjob: add virDomainBlockCommit
A block commit moves data in the opposite direction of block pull.
Block pull reduces the chain length by dropping backing files after
data has been pulled into the top overlay, and is always safe; block
commit reduces the chain length by dropping overlays after data has
been committed into the backing file, and any files that depended
on base but not on top are invalidated at any point where they have
unallocated data that is now pointing to changed contents in base.
Both directions are useful, however: a qcow2 layer that is more than
50% allocated will typically be faster with a pull operation, while
a qcow2 layer with less than 50% allocation will be faster as a
commit operation.  Committing across multiple layers can be more
efficient than repeatedly committing one layer at a time, but
requires extra support from the hypervisor.

This API matches Jeff Cody's proposed qemu command 'block-commit':
https://lists.gnu.org/archive/html/qemu-devel/2012-09/msg02226.html

Jeff's command is still in the works for qemu 1.3, and may gain
further enhancements, such as the ability to control on-error
handling (it will be comparable to the error handling Paolo is
adding to 'drive-mirror', so a similar solution will be needed
when I finally propose virDomainBlockCopy with more functionality
than the basics supported by virDomainBlockRebase).  However, even
without qemu support, this API will be useful for _offline_ block
commits, by wrapping qemu-img calls and turning them into a block
job, so this API is worth committing now.

For some examples of how this will be implemented, all starting
with the chain: base <- snap1 <- snap2 <- active

+ These are equivalent:
 virDomainBlockCommit(dom, disk, NULL, NULL, 0, 0)
 virDomainBlockCommit(dom, disk, NULL, "active", 0, 0)
 virDomainBlockCommit(dom, disk, "base", NULL, 0, 0)
 virDomainBlockCommit(dom, disk, "base", "active", 0, 0)
but cannot be implemented for online qemu with round 1 of
Jeff's patches; and for offline images, it would require
three back-to-back qemu-img invocations unless qemu-img
is patched to allow more efficient multi-layer commits;
the end result would be 'base' as the active disk with
contents from all three other files, where 'snap1' and
'snap2' are invalid right away, and 'active' is invalid
once any further changes to 'base' are made.

+ These are equivalent:
 virDomainBlockCommit(dom, disk, "snap2", NULL, 0, 0)
 virDomainBlockCommit(dom, disk, NULL, NULL, 0, _SHALLOW)
they cannot be implemented for online qemu, but for offline,
it is a matter of 'qemu-img commit active', so that 'snap2'
is now the active disk with contents formerly in 'active'.

+ Similarly:
 virDomainBlockCommit(dom, disk, "snap2", NULL, 0, _DELETE)
for an offline domain will merge 'active' into 'snap2', then
delete 'active' to avoid leaving a potentially invalid file
around.

+ This version:
 virDomainBlockCommit(dom, disk, NULL, "snap2", 0, _SHALLOW)
can be implemented online with 'block-commit' passing a base of
snap1 and a top of snap2; and can be implemented offline by
'qemu-img commit snap2' followed by 'qemu-img rebase -u
-b snap1 active'

* include/libvirt/libvirt.h.in (virDomainBlockCommit): New API.
* src/libvirt.c (virDomainBlockCommit): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.10.2): Export it.
* src/driver.h (virDrvDomainBlockCommit): New driver callback.
* docs/apibuild.py (CParser.parseSignature): Add exception.
2012-09-17 21:28:08 -06:00
Osier Yang
12ad7435de node_memory: Define the APIs to get/set memory parameters
* include/libvirt/libvirt.h.in: (Add macros for the param fields,
  declare the APIs).
* src/driver.h: (New methods for the driver struct)
* src/libvirt.c: (Implement the public APIs)
* src/libvirt_public.syms: (Export the public symbols)
2012-09-17 13:49:44 +08:00
Osier Yang
7a236982fe list: Define new API virConnectListAllSecrets
This is to list the secret objects. Supports to filter the secrets
by its storage location, and whether it's private or not.

include/libvirt/libvirt.h.in: Declare enum virConnectListAllSecretFlags
                              and virConnectListAllSecrets.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllSecrets)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
2012-09-17 13:08:39 +08:00
Osier Yang
6498f76e31 list: Define new API virConnectListAllNWFilters
This is to list the network filter objects. No flags are supported

include/libvirt/libvirt.h.in: Declare enum virConnectListAllNWFilterFlags
                              and virConnectListAllNWFilters.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNWFilters)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
2012-09-17 12:35:15 +08:00
Osier Yang
c6a3be5dff list: Define new API virConnectListAllNodeDevices
This is to list the node device objects, supports to filter the results
by capability types.

include/libvirt/libvirt.h.in: Declare enum virConnectListAllNodeDeviceFlags
                              and virConnectListAllNodeDevices.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNodeDevices)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
2012-09-17 10:30:04 +08:00
Osier Yang
f4af202f4e list: Define new API virConnectListAllInterfaces
This is to list the interface objects, supported filtering flags
are: active|inactive.

include/libvirt/libvirt.h.in: Declare enum virConnectListAllInterfaceFlags
                              and virConnectListAllInterfaces.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllInterfaces)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
2012-09-12 15:19:46 +08:00
Osier Yang
89a1df9b06 list: Define new API virConnectListAllNetworks
This is to list the network objects, supported filtering flags
are: active|inactive, persistent|transient, autostart|no-autostart.

include/libvirt/libvirt.h.in: Declare enum virConnectListAllNetworkFlags
                              and virConnectListAllNetworks.
python/generator.py: Skip auto-generating
src/driver.h: (virDrvConnectListAllNetworks)
src/libvirt.c: Implement the public API
src/libvirt_public.syms: Export the symbol to public
2012-09-11 16:58:16 +08:00
Osier Yang
a42eac601e list: Define new API virStoragePoolListAllVolumes
Simply returns the storage volume objects. No supported filter
flags.

include/libvirt/libvirt.h.in: Declare the API
python/generator.py: Skip the function for generating. virStoragePool.py
                     will be added in later patch.
src/driver.h: virDrvStoragePoolListVolumesFlags
src/libvirt.c: Implementation for the API.
src/libvirt_public.syms: Export the symbol to public
2012-09-10 10:37:22 +08:00
Jiri Denemark
fc4115e8d6 Add PMSUSPENDED life cycle event
While PMSUSPENDED state was added a long time ago, we didn't have
corresponding life cycle event.
2012-09-07 09:38:22 +02:00
Osier Yang
075c754af0 list: Define new API virStorageListAllStoragePools
This introduces a new API to list the storage pool objects,
4 groups of flags are provided to filter the returned pools:

  * Active or not

  * Autostarting or not

  * Persistent or not

  * And the pool type.

include/libvirt/libvirt.h.in: New enum virConnectListAllStoragePoolFlags;
                              Declare the API.
python/generator.py: Skip the generating
src/driver.h: (virDrvConnectListAllStoragePools)
src/libvirt.c: Implementation for the API.
src/libvirt_public.syms: Export the symbol.
2012-09-06 21:58:36 +08:00
Michal Privoznik
aa3e8bd4ca Introduce new VIR_ERR_AGENT_UNRESPONSIVE error code
Currently, when guest agent is configured but not responsive
(e.g. due to appropriate service not running in the guest)
we return VIR_ERR_INTERNAL_ERROR. Both are wrong. Therefore
we need to introduce new error code to reflect this case.
2012-08-27 18:00:10 +02:00
MATSUDA Daiki
847fc9945e agent: add virDrvDomainQemuAgentCommand prototype for drivers.
Add virDrvDomainQemuAgentCommand prototype for drivers.
Add virDomainQemuAgentCommand() for virDrvDomainQemuAgentCommand.

Signed-off-by: MATSUDA Daiki <matsudadik@intellilink.co.jp>
2012-08-23 18:13:15 +08:00
MATSUDA Daiki
05447e3af4 agent : add @seconds variable to qemuAgentSend().
Add @seconds variable to qemuAgentSend().
When @timemout is true, @seconds controls how long to wait for a
response (if @seconds is VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT,
default to QEMU_AGENT_WAIT_TIME).
In addition, @seconds must be >= 0 or VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT.
If @timeout is false, @seconds is ignored.

Signed-off-by: MATSUDA Daiki <matsudadik@intellilink.co.jp>
2012-08-23 17:55:33 +08:00
Hu Tao
e051c482aa new interface to control emulator_period/emulator_quota
This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus
2012-08-22 16:56:41 +08:00
Tang Chen
c152bf9425 Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions.
Introduce 2 APIs to set/get physical cpu pinning info of emulator threads.

Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
2012-08-22 16:20:13 +08:00
Peter Krempa
1193fc5f44 libssh2_transport: add main libssh2 transport implementation
This patch adds helper functions that enable us to use libssh2 in
conjunction with libvirt's virNetSockets for ssh transport instead of
spawning "ssh" client process.

This implemetation supports tunneled plaintext, keyboard-interactive,
private key, ssh agent based and null authentication. Libvirt's Auth
callback is used for interaction with the user. (Keyboard interactive
authentication, adding of host keys, private key passphrases). This
enables seamless integration into the application using libvirt. No
helpers as "ssh-askpass" are needed.

Reading and writing of OpenSSH style "known_hosts" files is supported.

Communication is done using SSH exec channel, where the user may specify
arbitrary command to be executed on the remote side and reads and writes
to/from stdin/out are sent through the ssh channel. Usage of stderr is
not (yet) supported.
2012-08-21 14:47:09 +02:00
Marcelo Cerri
2f8a09fbce Update the remote API
This patch updates libvirt's API to allow applications to inspect the
full list of security labels of a domain.

Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
2012-08-20 19:14:30 +02:00
Shradha Shah
f9150c8158 conf: move DevicePCIAddress functions to separate file
Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c

Refactoring existing code without causing any functional changes to
prepare for new code.

This patch makes the code reusable.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
2012-08-17 15:43:25 -04:00
Osier Yang
01aa172cb8 Fix the indentions of libvirt.h.in
Substitute 2 spaces with 4 spaces instead.
2012-08-17 22:58:23 +08:00
Peter Krempa
e9a24e3e3d virterror: Add error message for unsupported operations.
This patch introduces a new error code VIR_ERR_OPERATION_UNSUPPORTED to
mark error messages regarding operations that failed due to lack of
support on the hypervisor or other than libvirt issues.

The code is first used in reporting error if qemu does not support block
IO tuning variables yielding error message:
error: Unable to get block I/O throttle parameters
error: Operation not supported: block_io_throttle field
'total_bytes_sec' missing in qemu's output

instead of:
error: Unable to get block I/O throttle parameters
error: internal error cannot read total_bytes_sec
2012-08-11 10:03:00 +02:00
Dmitry Guryanov
cafc26ff5f parallels: add driver skeleton
Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.

More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.

Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2012-08-01 11:44:26 +08:00
Daniel P. Berrange
6ed5a1b9bd Add public API to register a callback to be invoked on connection close
Define new virConnect{Register,Unregister}CloseCallback() public APIs
which allows registering/unregistering a callback to be invoked when
the connection to a hypervisor is closed. The callback is provided
with the reason for the close, which may be 'error', 'eof', 'client'
or 'keepalive'.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-30 10:08:40 +01:00
Peter Krempa
d6e94bdd3d lib: Revert removing of Summary and Description fields in headers
Those fields are used by the apibuild script to create documentation.
This commit partialy reverts a4bcefbcff.
2012-07-27 15:47:16 +02:00
Osier Yang
a4bcefbcff maint: Use consistent copyright.
This is a follow up patch of commit f9ce7dad6, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.

And deserts the outdated comments like:

 * libvirt-qemu.h:
 * Summary: qemu specific interfaces
 * Description: Provides the interfaces of the libvirt library to handle
 *              qemu specific methods
 *
 * Copy:  Copyright (C) 2010, 2012 Red Hat, Inc.

Uses the more compact style like:

 * libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
 *
 * Copyright (C) 2010, 2012 Red Hat, Inc.
2012-07-27 18:27:21 +08:00
Guido Günther
a91067fa0d Add virDomainGetHostname
to query a guests's hostname. Containers like LXC and OpenVZ allow to
set a hostname different from the hosts name and QEMU's guest agent
could provide similar functionality.
2012-07-20 21:54:34 +02:00
Daniel P. Berrange
7ed6d7dda7 Define public API for receiving guest memory balloon events
When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this

* include/libvirt/libvirt.h.in: Define the
  virConnectDomainEventBalloonChangeCallback callback
  and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
  python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
  examples/domain-events/events-python/event-test.py: Add
  example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
  of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
  balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-14 16:02:26 +08:00
Michal Privoznik
8d27005b50 storage: Introduce --inactive for pool-dumpxml
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
2012-06-25 13:23:28 +02:00
Eric Blake
37bb0447bb list: add virDomainListAllSnapshots API
There was an inherent race between virDomainSnapshotNum() and
virDomainSnapshotListNames(), where an additional snapshot could
be created in the meantime, or where a snapshot could be deleted
before converting the name back to a virDomainSnapshotPtr.  It
was also an awkward name: the function operates on domains, not
domain snapshots.  virDomainSnapshotListChildrenNames() suffered
from the same inherent race, although its naming was nicer.

This patch makes things nicer by grabbing a snapshot list
atomically, in the format most useful to the user.

* include/libvirt/libvirt.h.in (virDomainListAllSnapshots)
(virDomainSnapshotListAllChildren): New declarations.
* src/libvirt.c (virDomainSnapshotListNames)
(virDomainSnapshotListChildrenNames): Add cross-references.
(virDomainListAllSnapshots, virDomainSnapshotListAllChildren):
New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainListAllSnapshots)
(virDrvDomainSnapshotListAllChildren): New callbacks.
* python/generator.py (skip_function): Prepare for later
hand-written versions.
2012-06-19 13:50:03 -06:00
Eric Blake
5873f2e2da snapshot: add additional filters when getting lists
It turns out that one-bit filtering makes it hard to select the inverse
set, so it is easier to provide filtering groups.  For back-compat,
omitting all bits within a group means the group is not used for
filtering, and by definition of a group (each snapshot matches exactly
one bit within the group, and the set of bits in the group covers all
snapshots), selecting all bits also makes the group useless.

Unfortunately, virDomainSnapshotListChildren defined the bit
VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS as an expansion rather than a
filter, so we cannot make it part of a filter group, so that bit
(and its counterpart VIR_DOMAIN_SNAPSHOT_LIST_ROOTS for
virDomainSnapshotList) remains a single control bit.

* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add a
couple more flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotNumChildren): Document them.
(virDomainSnapshotListNames, virDomainSnapshotListChildrenNames):
Likewise, and add thread-safety caveats.
* src/conf/virdomainlist.h (VIR_DOMAIN_SNAPSHOT_FILTERS_*): New
convenience macros.
* src/conf/domain_conf.c (virDomainSnapshotObjListCopyNames)
(virDomainSnapshotObjListCount): Support the new flags.
2012-06-19 13:50:03 -06:00
Peter Krempa
747f64eeaf lib: Add public api to enable atomic listing of guest
This patch adds a new public api that lists domains. The new approach is
different from those used before. There are key points to this:

1) The list is acquired atomically and contains both active and inactive
domains (guests). This eliminates the need to call two different list
APIs, where the state might change in between the calls.

2) The returned list consists of virDomainPtrs instead of names or ID's
that have to be converted to virDomainPtrs anyways using separate calls
for each one of them. This is more convenient and saves hypervisor calls.

3) The returned list is auto-allocated. This saves a lot of hassle for
the users.

4) Built in support for filtering. The API call supports various
filtering flags that modify the output list according to user needs.

Available filter groups:
    Domain status:
    VIR_CONNECT_LIST_DOMAINS_ACTIVE, VIR_CONNECT_LIST_DOMAINS_INACTIVE

    Domain persistence:
    VIR_CONNECT_LIST_DOMAINS_PERSISTENT,
    VIR_CONNECT_LIST_DOMAINS_TRANSIENT

    Domain state:
    VIR_CONNECT_LIST_DOMAINS_RUNNING, VIR_CONNECT_LIST_DOMAINS_PAUSED,
    VIR_CONNECT_LIST_DOMAINS_SHUTOFF, VIR_CONNECT_LIST_DOMAINS_OTHER

    Existence of managed save image:
    VIR_CONNECT_LIST_DOMAINS_MANAGEDSAVE,
    VIR_CONNECT_LIST_DOMAINS_NO_MANAGEDSAVE

    Auto-start option:
    VIR_CONNECT_LIST_DOMAINS_AUTOSTART,
    VIR_CONNECT_LIST_DOMAINS_NO_AUTOSTART

    Existence of snapshot:
    VIR_CONNECT_LIST_DOMAINS_HAS_SNAPSHOT,
    VIR_CONNECT_LIST_DOMAINS_NO_SNAPSHOT

5) The python binding returns a list of domain objects that is very neat
to work with.

The only problem with this approach is no support from code generators
so both RPC code and python bindings had to be written manually.

*include/libvirt/libvirt.h.in: - add API prototype
                               - clean up whitespace mistakes nearby
*python/generator.py: - inhibit generation of the bindings for the new
                        api
*src/driver.h: - add driver prototype
               - clean up some whitespace mistakes nearby
*src/libvirt.c: - add public implementation
*src/libvirt_public.syms: - export the new symbol
2012-06-18 21:24:13 +02:00
Wen Congyang
cdef31c562 qemu: allow the client to choose the vmcore's format
This patch updates qemu driver to allow the client to choose the
vmcore's format: memory only or including device state.
2012-06-15 20:36:14 +08:00
Eric Blake
2e13b9ab3c snapshot: new query APIs
Right now, starting from just a virDomainSnapshotPtr, and wanting to
know if it is the current snapshot for its respective domain, you have
to use virDomainSnapshotGetDomain(), then virDomainSnapshotCurrent(),
then compare the two names returned by virDomainSnapshotGetName().
It is a bit easier if we can directly query this information from the
snapshot itself.

Right now, it is possible to filter a snapshot listing based on
whether snapshots have metadata that would prevent domain deletion,
but the only way to learn if an individual snapshot has metadata is
to see if that snapshot appears in the list returned by a listing.
Additionally, I hope to expand the qemu driver in a future patch to
use qemu-img to reconstruct snapshot XML corresponding to internal
qcow2 snapshot names not otherwise tracked by libvirt (in part, so
that libvirt can guarantee that new snapshots are not created with
a name that would silently corrupt the existing portion of the qcow2
file); if I ever get that in, then it would no longer be an all-or-none
decision on whether snapshots have metadata, and becomes all the more
important to be able to directly determine that information from a
particular snapshot.

Other query functions (such as virDomainIsActive) do not have a flags
argument, but since virDomainHasCurrentSnapshot takes a flags argument,
I figured it was safer to provide a flags argument here as well.

* include/libvirt/libvirt.h.in (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New declarations.
* src/libvirt.c (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainSnapshotIsCurrent)
(virDrvDomainSnapshotHasMetadata): New driver callbacks.
2012-06-11 10:43:03 -06:00
Eric Blake
9d08debe88 snapshot: add virDomainSnapshotRef API
virDomainSnapshotPtr has a refcount member, but no one was able
to use it.  Furthermore, all of our other vir*Ptr objects have
a *Ref method to match their *Free method.  Thankfully, this is
client-side only, so we can use this new function regardless of
how old the server side is!  (I have future patches to virsh
that want to use it.)

* include/libvirt/libvirt.h.in (virDomainSnapshotRef): Declare.
* src/libvirt.c (virDomainSnapshotRef): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export it.
2012-06-08 10:32:36 -06:00
Daniel P. Berrange
1cc2034a72 Add sentinel for virErrorDomain enum
Add a VIR_ERR_DOMAIN_LAST sentinel for virErrorDomain and
replace the virErrorDomainName function by a VIR_ENUM_IMPL

In the process the naming of error domains is sanitized

* src/util/virterror.c: Use VIR_ENUM_IMPL for converting
  error domains to strings
* include/libvirt/virterror.h: Add VIR_ERR_DOMAIN_LAST
2012-05-24 16:20:55 +01:00
Wido den Hollander
74951eadef storage backend: Add RBD (RADOS Block Device) support
This patch adds support for a new storage backend with RBD support.

RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.

It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.

To function this backend relies on librbd and librados being present on the
local system.

The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.

For storing credentials it uses the built-in secret mechanism of libvirt.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2012-05-21 12:37:38 -06:00
Hu Tao
d29a7aaa1a Add a new param 'vcpu_time' to virDomainGetCPUStats
Currently virDomainGetCPUStats gets total cpu usage, which consists
of:

  1. vcpu usage: the physical cpu time consumed by virtual cpu(s) of
     domain
  2. hypervisor: `total cpu usage' - `vcpu usage'

The param 'vcpu_time' is for getting vcpu usages.
2012-05-17 12:42:06 -06:00
Eric Blake
3648469258 blockjob: add new API flags
This patch introduces a new block job, useful for live storage
migration using pre-copy streaming.  Justification for including
this under virDomainBlockRebase rather than adding a new command
includes: 1) there are now two possible block jobs in qemu, with
virDomainBlockRebase starting either type of command, and
virDomainBlockJobInfo and virDomainBlockJobAbort working to end
either type; 2) reusing this command allows distros to backport
this feature to the libvirt 0.9.10 API without a .so bump.

Note that a future patch may add a more powerful interface named
virDomainBlockJobCopy, dedicated to just the block copy job, in
order to expose even more options (such as setting an arbitrary
format type for the destination without having to probe it from a
pre-existing destination file); adding a new command for targetting
just block copy would be similar to how we already have
virDomainBlockPull for targetting just the block pull job.

Using a live VM with the backing chain:
  base <- snap1 <- snap2
as the starting point, we have:

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY)
creates /path/to/copy with the same format as snap2, with no backing
file, so entire chain is copied and flattened

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
creates /path/to/copy as a raw file, so entire chain is copied and
flattened

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_SHALLOW)
creates /path/to/copy with the same format as snap2, but with snap1 as
a backing file, so only snap2 is copied.

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT)
reuse existing /path/to/copy (must have empty contents, and format is
probed[*] from the metadata), and copy the full chain

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
    VIR_DOMAIN_BLOCK_REBASE_SHALLOW)
reuse existing /path/to/copy (contents must be identical to snap1,
and format is probed[*] from the metadata), and copy only the contents
of snap2

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
    VIR_DOMAIN_BLOCK_REBASE_SHALLOW|VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
reuse existing /path/to/copy (must be raw volume with contents
identical to snap1), and copy only the contents of snap2

Less useful combinations:

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_SHALLOW|
    VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
fail if source is not raw, otherwise create /path/to/copy as raw and
the single file is copied (no chain involved)

- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
    VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
    VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
makes little sense: the destination must be raw but have no contents,
meaning that it is an empty file, so there is nothing to reuse

The other three flags are rejected without VIR_DOMAIN_BLOCK_COPY.

[*] Note that probing an existing file for its format can be a security
risk _if_ there is a possibility that the existing file is 'raw', in
which case the guest can manipulate the file to appear like some other
format.  But, by virtue of the VIR_DOMAIN_BLOCK_REBASE_COPY_RAW flag,
it is possible to avoid probing of raw files, at which point, probing
of any remaining file type is no longer a security risk.

It would be nice if we could issue an event when pivoting from phase 1
to phase 2, but qemu hasn't implemented that, and we would have to poll
in order to synthesize it ourselves.  Meanwhile, qemu will give us a
distinct job info and completion event when we either cancel or pivot
to end the job.  Pivoting is accomplished via the new:

virDomainBlockJobAbort(dom, disk, VIR_DOMAIN_BLOCK_JOB_ABORT_PIVOT)

Management applications can pre-create the copy with a relative
backing file name, and use the VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT
flag to have qemu reuse the metadata; if the management application
also copies the backing files to a new location, this can be used
to perform live storage migration of an entire backing chain.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_JOB_TYPE_COPY):
New block job type.
(virDomainBlockJobAbortFlags, virDomainBlockRebaseFlags): New enums.
* src/libvirt.c (virDomainBlockRebase): Document the new flags,
and implement general restrictions on flag combinations.
(virDomainBlockJobAbort): Document the new flag.
(virDomainSaveFlags, virDomainSnapshotCreateXML)
(virDomainRevertToSnapshot, virDomainDetachDeviceFlags): Document
restrictions.
* include/libvirt/virterror.h (VIR_ERR_BLOCK_COPY_ACTIVE): New
error.
* src/util/virterror.c (virErrorMsg): Define it.
2012-04-23 07:44:29 -06:00
Daniel P. Berrange
2223ea984c The policy kit and HAL node device drivers both require a
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.

The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.

Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
2012-04-19 17:03:10 +01:00
Adam Litke
a696f8b71a blockjob: add API for async virDomainBlockJobAbort
Block job cancellation can take a while.  Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:

A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt.  Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel).  Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).

A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API.  When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.

This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2012-04-11 20:52:18 -06:00
Eric Blake
4d5533ca87 snapshot: add atomic create flag
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.

This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group.  If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.

There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure.  However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.

* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
2012-03-23 16:38:20 -06:00
Eric Blake
9b6860f5ce build: fix incorrect enum declaration
Recent changes have caused build failures on systems where pdwtags works:
commit a26a196 mistakenly exported a public variable
commits a26a196, 57ddcc2, 487c063 all had copy-paste bugs in
hand-updating the golden API rather than rerunning pdwtags

* include/libvirt/libvirt.h.in (virDomainEventTrayChangeReason):
Make this a typedef, not external storage.
* src/remote_protocol-structs (remote_procedure): Fix spelling.
2012-03-23 14:29:00 -06:00
Osier Yang
7c5a0c94e4 qemu: Update domain status to running while wakeup event is emitted
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.

While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
2012-03-23 23:12:29 +08:00
Osier Yang
54d9026a2c New domain state pmsuspended
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
2012-03-23 23:12:22 +08:00
Osier Yang
487c063381 Add support for the suspend event
This patch introduces a new event type for the QMP event
SUSPEND:

    VIR_DOMAIN_EVENT_ID_PMSUSPEND

The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:

typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
                                        virDomainPtr dom,
                                        int reason,
                                        void *opaque);

"reason" is unused currently, always passes "0".
2012-03-23 23:12:18 +08:00
Osier Yang
57ddcc235a Add support for the wakeup event
This patch introduces a new event type for the QMP event
WAKEUP:

    VIR_DOMAIN_EVENT_ID_PMWAKEUP

The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:

typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
                                       virDomainPtr dom,
                                       int reason,
                                       void *opaque);

"reason" is unused currently, always passes "0".
2012-03-23 23:12:14 +08:00
Osier Yang
a26a1969c3 Add support for event tray moved of removable disks
This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):

    VIR_DOMAIN_EVENT_ID_TRAY_CHANGE

The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:

enum {
    VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
    VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,

\#ifdef VIR_ENUM_SENTINELS
    VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;

typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
                                           virDomainPtr dom,
                                           const char *devAlias,
                                           int reason,
                                           void *opaque);
2012-03-23 23:10:26 +08:00
Daniel P. Berrange
a4fb88b5c9 Add helper API for finding auth file path
* src/util/virauth.c, src/util/virauth.h: Add virAuthGetConfigFilePath
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUTH error domain

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-03-23 13:24:07 +00:00
Daniel P. Berrange
1f66c18f79 Centralize error reporting for URI parsing/formatting problems
Move error reporting out of the callers, into virURIParse
and virURIFormat, to get consistency.

* include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_URI
* src/util/viruri.c, src/util/viruri.h: Add error reporting
* src/esx/esx_driver.c, src/libvirt.c, src/libxl/libxl_driver.c,
  src/lxc/lxc_driver.c, src/openvz/openvz_driver.c,
  src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
  src/remote/remote_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/vmx/vmx.c, src/xen/xen_driver.c,
  src/xen/xend_internal.c, tests/viruritest.c: Remove error
  reporting

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-03-23 12:59:21 +00:00
Eric Blake
759095f636 cpustats: report user and sys times
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
2012-03-12 08:46:56 -06:00
Eric Blake
239fb8c46b api: add overflow error
Overflow can be user-induced, so it deserves more than being called
an internal error.  Note that in general, 32-bit platforms have
far more places to trigger this error (anywhere the public API
used 'unsigned long' but the other side of the connection is a
64-bit server); but some are possible on 64-bit platforms (where
the public API computes the product of two numbers).

* include/libvirt/virterror.h (VIR_ERR_OVERFLOW): New error.
* src/util/virterror.c (virErrorMsg): Translate it.
* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpuPinInfo)
(virDomainGetVcpus, virDomainGetCPUStats): Use it.
* daemon/remote.c (HYPER_TO_TYPE): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Likewise.
2012-03-07 18:24:43 -07:00
Eric Blake
877fd769b9 blockResize: add flag for bytes
Qemu supports sizing by bytes; we shouldn't force the user to
round up if they really wanted an unaligned total size.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_RESIZE_BYTES):
New flag.
* src/libvirt.c (virDomainBlockResize): Document it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockResize): Take
size in bytes.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextBlockResize):
Likewise.  Pass bytes, not megabytes, to monitor.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Implement new
flag.
2012-03-05 10:06:52 -07:00
Osier Yang
3d2da30edb Fix type and add missed comment for diskChange callback
Comment for parameter devAlias is missed. And a typo should
be caused by copy & paste.
2012-03-05 18:43:32 +08:00
Eric Blake
3e2c3d8f6d build: use correct type for pid and similar types
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'.  Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.

Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.

* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
2012-03-02 06:57:43 -07:00
Peter Krempa
a1801023f4 Add flags for virDomainOpenConsole
This patch adds a set of flags to be used with the virDomainOpenConsole
API call to specify if the user wishes to interrupt an existing console
session or just to try open a new one.

VIR_DOMAIN_CONSOLE_SAFE - specifies that the console connection should
                          be opened only if the hypervisor supports
                          mutually exclusive access to console devices

VIR_DOMAIN_CONSOLE_FORCE - specifies that the caller wishes to interrupt
                           existing session and force a creation of a
                           new one.
2012-02-27 15:05:16 +01:00
Michal Privoznik
e2822f19fd Introduce virDomainPMWakeup API
This API allows a domain which previously called
virDomainPMSuspendForDuration() to be woken up.
2012-02-27 11:43:59 +01:00
Jiri Denemark
7808844dd1 Add support for unsafe migration
This patch adds VIR_MIGRATE_UNSAFE flag for migration APIs and new
VIR_ERR_MIGRATION_UNSAFE error code.  The error code should be returned
whenever migrating a domain is considered unsafe (e.g., it's configured
in a way that does not ensure data integrity once it is migrated).
VIR_MIGRATE_UNSAFE flag may be used to force migration even though it
would normally be considered unsafe and forbidden.
2012-02-22 14:52:24 +01:00
Eric Blake
8f00276c8a maint: consolidate several .gitignore files
Unlike .cvsignore under CVS, git allows for ignoring nested
names.  We weren't very consistent where new tests were
being ignored (some in .gitignore, some in tests/.gitignore),
and I found it easier to just consolidate everything.

* .gitignore: Subsume entries from subdirectories.
* daemon/.gitignore: Delete.
* docs/.gitignore: Likewise.
* docs/devhelp/.gitignore: Likewise.
* docs/html/.gitignore: Likewise.
* examples/dominfo/.gitignore: Likewise.
* examples/domsuspend/.gitignore: Likewise.
* examples/hellolibvirt/.gitignore: Likewise.
* examples/openauth/.gitignore: Likewise.
* examples/domain-events/events-c/.gitignore: Likewise.
* include/libvirt/.gitignore: Likewise.
* src/.gitignore: Likewise.
* src/esx/.gitignore: Likewise.
* tests/.gitignore: Likewise.
* tools/.gitignore: Likewise.
2012-02-03 15:27:16 -07:00
Laine Stump
72f8a7f197 qemu: new GRACEFUL flag for virDomainDestroy w/ QEMU support
When libvirt's virDomainDestroy API is shutting down the qemu process,
it first sends SIGTERM, then waits for 1.6 seconds and, if it sees the
process still there, sends a SIGKILL.

There have been reports that this behavior can lead to data loss
because the guest running in qemu doesn't have time to flush its disk
cache buffers before it's unceremoniously whacked.

This patch maintains that default behavior, but provides a new flag
VIR_DOMAIN_DESTROY_GRACEFUL to alter the behavior. If this flag is set
in the call to virDomainDestroyFlags, SIGKILL will never be sent to
the qemu process; instead, if the timeout is reached and the qemu
process still exists, virDomainDestroy will return an error.

Once this patch is in, the recommended method for applications to call
virDomainDestroyFlags will be with VIR_DOMAIN_DESTROY_GRACEFUL
included. If that fails, then the application can decide if and when
to call virDomainDestroyFlags again without
VIR_DOMAIN_DESTROY_GRACEFUL (to force the issue with SIGKILL).

(Note that this does not address the issue of existing applications
that have not yet been modified to use VIR_DOMAIN_DESTROY_GRACEFUL.
That is a separate patch.)
2012-02-03 14:21:17 -05:00
Martin Kletzander
3d93706d0d Added RSS reporting
Added RSS information gathering into qemuMemoryStats into qemu driver
and the reporting into virsh dommemstat.
2012-02-03 20:54:58 +08:00
Eric Blake
99fd69c3de block rebase: add new API virDomainBlockRebase
Qemu is adding the ability to do a partial rebase.  That is, given:

base <- intermediate <- current

virDomainBlockPull will produce:

current

but qemu now has the ability to leave base in the chain, to produce:

base <- current

Note that current qemu can only do a forward merge, and only with
the current image as the destination, which is fully described by
this API without flags.  But in the future, it may be possible to
enhance this API for additional scenarios by using flags:

Merging the current image back into a previous image (that is,
undoing a live snapshot), could be done by passing base as the
destination and flags with a bit requesting a backward merge.

Merging any other part of the image chain, whether forwards (the
backing image contents are pulled into the newer file) or backwards
(the deltas recorded in the newer file are merged back into the
backing file), could also be done by passing a new flag that says
that base should be treated as an XML snippet rather than an
absolute path name, where the XML could then supply the additional
instructions of which part of the image chain is being merged into
any other part.

* include/libvirt/libvirt.h.in (virDomainBlockRebase): New
declaration.
* src/libvirt.c (virDomainBlockRebase): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.10): Export it.
* src/driver.h (virDrvDomainBlockRebase): New driver callback.
* src/rpc/gendispatch.pl (long_legacy): Add exemption.
* docs/apibuild.py (long_legacy_functions): Likewise.
2012-02-01 15:21:56 -07:00
Peter Krempa
c471e55e10 API: Add api to set and get domain metadata
This patch adds API to modify domain metadata for running and stopped
domains. The api supports changing description, title as well as the
newly added <metadata> element. The API has support for storing data in
the metadata element using xml namespaces.

* include/libvirt/libvirt.h.in
* src/libvirt_public.syms
        - add function headers
        - add enum to select metadata to operate on
        - export functions
* src/libvirt.c
        - add public api implementation
* src/driver.h
        - add driver support
* src/remote/remote_driver.c
* src/remote/remote_protocol.x
        - wire up the remote protocol
* include/libvirt/virterror.h
* src/util/virterror.c
        - add a new error message note that metadata for domain are
        missing
2012-02-01 15:01:38 -07:00
Jiri Denemark
02af3e13b2 virDomainGetDiskErrors public API
We already provide ways to detect when a domain has been paused as a
result of I/O error, but there was no way of getting the exact error or
even the device that experienced it.  This new API may be used for both.
2012-02-01 10:42:16 +01:00
Eric Blake
055bbf45e4 resize: slightly alter signature
Our existing virDomainBlockResize takes an unsigned long long
argument; if that command is later taught a DELTA and SHRINK flag,
we cannot change its type without breaking API (but at least such
a change would be ABI compatible).  Meanwhile, the only time a
negative size makes sense is if both DELTA and SHRINK are used
together, but if we keep the argument unsigned, applications can
pass the positive delta amount by which they would like to shrink
the system, and have the flags imply the negative value.  So,
since this API has not yet been released, and in the interest of
consistency with existing API, we swap virStorageVolResize to
always pass an unsigned value.

* include/libvirt/libvirt.h.in (virStorageVolResize): Use unsigned
argument.
* src/libvirt.c (virStorageVolResize): Likewise.
* src/driver.h (virDrvStorageVolUpload): Adjust clients.
* src/remote/remote_protocol.x (remote_storage_vol_resize_args):
Likewise.
* src/remote_protocol-structs: Regenerate.
Suggested by Daniel P. Berrange.
2012-01-31 11:58:06 -05:00
Eric Blake
5c6651fea2 docs: reorder public header
The bottom of the public header is reserved for deprecated APIs;
it's nicer to arrange things in logical groups.

* include/libvirt/libvirt.h.in (virConnectSetKeepAlive)
(virDomainGetCPUStats): Float earlier in the file.
2012-01-28 07:37:55 -07:00
KAMEZAWA Hiroyuki
e1eea7470b Add new public API virDomainGetCPUStats()
add new API virDomainGetCPUStats() for getting cpu accounting information
per real cpus which is used by a domain.  The API is designed to allow
future extensions for additional statistics.

based on ideas by Lai Jiangshan and Eric Blake.

* src/libvirt_public.syms: add API for LIBVIRT_0.9.10
* src/libvirt.c: define virDomainGetCPUStats()
* include/libvirt/libvirt.h.in: add virDomainGetCPUStats() header
* src/driver.h: add driver API
* python/generator.py: add python API (as not implemented)

Signed-off-by: Eric Blake <eblake@redhat.com>
2012-01-28 07:18:27 -07:00
Michal Privoznik
8f8b080263 Introduce virDomainPMSuspendForDuration API
This API allows a domain to be put into one of S# ACPI states.
Currently, S3 and S4 are supported. These states are shared
with virNodeSuspendForDuration.
However, for now we don't support any duration other than zero.
The same apply for flags.
2012-01-28 10:20:46 +01:00
Zeeshan Ali (Khattak)
6714fd04d2 resize: add virStorageVolResize() API
Add a new function to allow changing of capacity of storage volumes.
Plan out several flags, even if not all of them will be implemented
up front.

Expose the new command via 'virsh vol-resize'.

Signed-off-by: Eric Blake <eblake@redhat.com>
2012-01-27 19:56:18 -07:00
Cole Robinson
bb2eddc6cf Add new error code VIR_ERROR_AUTH_CANCELLED
And hook it up for policykit auth. This allows virt-manager to detect
that the user clicked the policykit 'cancel' button and not throw
an 'authentication failed' error message at the user.
2012-01-27 16:53:27 -05:00
Michal Privoznik
adb99a05b1 storage: Support different wiping algorithms
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
2012-01-26 13:59:30 +01:00
Michal Privoznik
109593ecb0 snapshots: Introduce VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE flag
With this flag, virDomainSnapshotCreate will use fs-freeze and
fs-thaw guest agent commands to quiesce guest's disks.
2012-01-25 10:59:41 +01:00
Daniel P. Berrange
0b7ddf9e77 Add new virDomainShutdownFlags API
Add a new API virDomainShutdownFlags and define:

    VIR_DOMAIN_SHUTDOWN_DEFAULT        = 0,
    VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_SHUTDOWN_GUEST_AGENT    = (1 << 1),

Also define some flags for the reboot API

    VIR_DOMAIN_REBOOT_DEFAULT        = 0,
    VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_REBOOT_GUEST_AGENT    = (1 << 1),

Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.

Add stub impls of the new API for all existing drivers
2012-01-24 12:19:51 +01:00
Eric Blake
7b4e5693c1 API: make declaration of _LAST enum values conditional
Although this is a public API break, it only affects users that
were compiling against *_LAST values, and can be trivially
worked around without impacting compilation against older
headers, by the user defining VIR_ENUM_SENTINELS before using
libvirt.h.  It is not an ABI break, since enum values do not
appear as .so entry points.  Meanwhile, it prevents users from
using non-stable enum values without explicitly acknowledging
the risk of doing so.

See this list discussion:
https://www.redhat.com/archives/libvir-list/2012-January/msg00804.html

* include/libvirt/libvirt.h.in: Hide all sentinels behind
LIBVIRT_ENUM_SENTINELS, and add missing sentinels.
* src/internal.h (VIR_DEPRECATED): Allow inclusion after
libvirt.h.
(LIBVIRT_ENUM_SENTINELS): Expose sentinels internally.
* daemon/libvirtd.h: Use the sentinels.
* src/remote/remote_protocol.x (includes): Don't expose sentinels.
* python/generator.py (enum): Likewise.
* tests/cputest.c (cpuTestCompResStr): Silence compiler warning.
* tools/virsh.c (vshDomainStateReasonToString)
(vshDomainControlStateToString): Likewise.
2012-01-20 16:05:51 -07:00
Shradha Shah
52d064f42d Added new option to virsh net-dumpxml called --inactive
The above option helps to differentiate between implicit and explicit
interface pools.
2012-01-11 13:15:09 -07:00
Eric Blake
4e9953a426 snapshot: allow reuse of existing files in disk snapshot
When disk snapshots were first implemented, libvirt blindly refused
to allow an external snapshot destination that already exists, since
qemu will blindly overwrite the contents of that file during the
snapshot_blkdev monitor command, and we don't like a default of
data loss by default.  But VDSM has a scenario where NFS permissions
are intentionally set so that the destination file can only be
created by the management machine, and not the machine where the
guest is running, so that libvirt will necessarily see the destination
file already existing; adding a flag will allow VDSM to force the file
reuse without libvirt complaining of possible data loss.

https://bugzilla.redhat.com/show_bug.cgi?id=767104

* include/libvirt/libvirt.h.in (virDomainSnapshotCreateFlags): Add
VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.  Add
note about partial failure.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Add new
flag.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateXML): Implement the new flag.
2012-01-10 11:53:23 -07:00
Eric Blake
269ce467fc domiftune: clean up previous patches
Most severe here is a latent (but currently untriggered) memory leak
if any hypervisor ever adds a string interface property; the
remainder are mainly cosmetic.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BANDWIDTH_*): Move
macros closer to interface that uses them, and document type.
* src/libvirt.c (virDomainSetInterfaceParameters)
(virDomainGetInterfaceParameters): Formatting tweaks.
* daemon/remote.c (remoteDispatchDomainGetInterfaceParameters):
Avoid memory leak.
* src/libvirt_public.syms (LIBVIRT_0.9.9): Sort lines.
* src/libvirt_private.syms (domain_conf.h): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetInterfaceParameters): Fix
comments, break long lines.
2012-01-02 14:35:12 -07:00
Hu Tao
85f3493f34 domiftune: Add API virDomain{S,G}etInterfaceParameters
The APIs are used to set/get domain's network interface's parameters.
Currently supported parameters are bandwidth settings.

* include/libvirt/libvirt.h.in: new API and parameters definition
* python/generator.py: skip the Python API generation
* src/driver.h: add new entry to the driver structure
* src/libvirt_public.syms: export symbols
2011-12-29 18:24:43 +08:00
Hu Tao
c57ca57034 add new API virDomain{G, S}etNumaParameters
Set up the types for the numa functions and insert them into the
virDriver structure definition.
2011-12-20 10:21:37 -07:00
Peter Krempa
8fb2aeb662 migration: Add more specific error code/message on migration abort
A generic error code was returned, if the user aborted a migration job.
This made it hard to distinguish between a user requested abort and an
error that might have occured. This patch introduces a new error code,
which is returned in the specific case of a user abort, while leaving
all other failures with their existing code. This makes it easier to
distinguish between failure while mirgrating and an user requested
abort.

 * include/libvirt/virterror.h: - add new error code
 * src/util/virterror.c: - add message for the new error code
 * src/qemu/qemu_migration.h: - Emit operation aborted error instead of
                                operation failed, on migration abort
2011-12-16 16:38:26 +01:00
Jiri Denemark
38527c9ae0 qemu: Rework handling of shutdown event
When QEMU guest finishes its shutdown sequence, qemu stops virtual CPUs
and when started with -no-shutdown waits for us to kill it using
SGITERM. Since QEMU is flushing its internal buffers, some time may pass
before QEMU actually dies. We mistakenly used "paused" state (and
events) for this which is quite confusing since users may see a domain
going to pause while they expect it to shutdown. Since we already have
"shutdown" state with "the domain is being shut down" semantics, we
should use it for this state.

However, the state didn't have a corresponding event so I created one
and called its detail as VIR_DOMAIN_EVENT_SHUTDOWN_FINISHED (guest OS
finished its shutdown sequence) with the intent to add
VIR_DOMAIN_EVENT_SHUTDOWN_STARTED in the future if we have a
sufficiently capable guest agent that can notify us when guest OS starts
to shutdown.
2011-12-05 14:14:31 +01:00
Peter Krempa
17c7795561 python: Expose binding for virNodeGetMemoryStats()
This patch adds binding for virNodeGetMemoryStats method of libvirtd.
Return value is represented as a python dictionary mapping field
names to values.
2011-12-05 12:22:33 +01:00
Peter Krempa
49556023f2 python: Expose binding for virNodeGetCPUStats()
This patch adds binding for virNodeGetCPUStats method of libvirtd.
Return value is represented as a python dictionary mapping field names
to values.
2011-12-05 12:22:33 +01:00
Daniel P. Berrange
866b0a7069 Fix values of PM target type constants
The VIR_NODE_SUSPEND_TARGET constants are not flags, so they
should just be assigned straightforward incrementing values.

* include/libvirt/libvirt.h.in: Change VIR_NODE_SUSPEND_TARGET
  values
* src/util/virnodesuspend.c: Fix suspend target checks
2011-11-30 10:12:29 +00:00
Lei Li
1f8a339dee Add new API virDomain{Set, Get}BlockIoTune
This patch add new pulic API virDomainSetBlockIoTune and
virDomainGetBlockIoTune.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-29 17:29:33 -07:00
Hu Tao
6ac81c8ec8 blkiotune: add interface for blkiotune.device_weight
This adds per-device weights to <blkiotune>.  Note that the
cgroups implementation only supports weights per block device,
and not per-file within the device; hence this option must be
global to the domain definition rather than tied to individual
<devices>/<disk> entries:

<domain ...>
  <blkiotune>
    <device>
      <path>/path/to/block</path>
      <weight>1000</weight>
    </device>
  </blkiotune>
..

This patch also adds a parameter --device-weights to virsh command
blkiotune for setting/getting blkiotune.weight_device for any
hypervisor that supports it.  All <device> entries under
<blkiotune> are concatenated into a single string attribute under
virDomain{Get,Set}BlkioParameters, named "device_weight".

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-29 12:26:21 -07:00
Osier Yang
caef87d557 block_resize: Define the new API
The new API is named as "virDomainBlockResize", intending to add
support for qemu monitor command "block_resize" (both HMP and QMP).

Similar with APIs like "virDomainSetMemoryFlags", the units for
argument "size" is kilobytes.
2011-11-29 21:40:43 +08:00
Srivatsa S. Bhat
979676e3db Add a public API to invoke suspend/resume on the host
Implement the public definitions for the new API
virNodeSuspendForDuration() which will be subsequently used to
do a timed suspend on the host.
2011-11-29 17:29:16 +08:00
Jiri Denemark
afdf014f4f Introduce virConnectIsAlive API
This API can be used to check if the socket associated with
virConnectPtr is still open or it was closed (probably because keepalive
protocol timed out). If there the connection is local (i.e., no socket
is associated with the connection, it is trivially always alive.
2011-11-24 12:00:10 +01:00
Jiri Denemark
8d6e3edd0e Introduce virConnectSetKeepAlive
virConnectSetKeepAlive public API can be used by a client connecting to
remote server to start using keepalive protocol. The API is handled
directly by remote driver and not transmitted over the wire to the
server.
2011-11-24 11:44:08 +01:00
Eric Blake
3ac26e2645 API: prefer 'disk' over 'block' or 'path'
Given that we can now handle the target's disk shorthand, in addition
to an absolute path to the file or block device used on the host,
the term 'disk' fits a bit better as the parameter name than 'path'.

* include/libvirt/libvirt.h.in: Update some parameter names.
* src/libvirt.c (virDomainBlockStats, virDomainBlockStatsFlags)
(virDomainBlockPeek, virDomainGetBlockInfo, virDomainBlockJobAbort)
(virDomainGetBlockJobInfo, virDomainBlockJobSetSpeed)
(virDomainBlockPull): Likewise.
2011-11-23 06:10:30 -07:00
Srivatsa S. Bhat
e352b16400 Export KVM Host Power Management capabilities
This patch exports KVM Host Power Management capabilities as XML so that
higher-level systems management software can make use of these features
available in the host.

The script "pm-is-supported" (from pm-utils package) is run to discover if
Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host.
If either of them are supported, then a new tag "<power_management>" is
introduced in the XML under the <host> tag.

However in case the query to check for power management features succeeded,
but the host does not support any such feature, then the XML will contain
an empty <power_management/> tag. In the event that the PM query itself
failed, the XML will not contain any "power_management" tag.

To use this, new APIs could be implemented in libvirt to exploit power
management features such as S3/S4.
2011-11-22 11:31:22 +08:00
Eric Blake
a218c81da2 API: add VIR_TYPED_PARAM_STRING
This allows strings to be transported between client and server
in the context of name-type-value virTypedParameter functions.
For compatibility,

    o new clients will not send strings to old servers, based on
      a feature check
    o new servers will not send strings to old clients without the
      flag VIR_TYPED_PARAM_STRING_OKAY; this will be enforced at
      the RPC layer in the next patch, so that drivers need not
      worry about it in general.  The one exception is that
      virDomainGetSchedulerParameters lacks a flags argument, so
      it must not return a string; drivers that forward that
      function on to virDomainGetSchedulerParametersFlags will
      have to pay attention to the flag.
    o the flag VIR_TYPED_PARAM_STRING_OKAY is set automatically,
      based on a feature check (so far, no driver implements it),
      so clients do not have to worry about it

Future patches can then enable the feature on a per-driver basis.

This patch also ensures that drivers can blindly strdup() field
names (previously, a malicious client could stuff 80 non-NUL bytes
into field and cause a read overrun).

* src/libvirt_internal.h (VIR_DRV_FEATURE_TYPED_PARAM_STRING): New
driver feature.
* src/libvirt.c (virTypedParameterValidateSet)
(virTypedParameterSanitizeGet): New helper functions.
(virDomainSetMemoryParameters, virDomainSetBlkioParameters)
(virDomainSetSchedulerParameters)
(virDomainSetSchedulerParametersFlags)
(virDomainGetMemoryParameters, virDomainGetBlkioParameters)
(virDomainGetSchedulerParameters)
(virDomainGetSchedulerParametersFlags, virDomainBlockStatsFlags):
Use them.
* src/util/util.h (virTypedParameterArrayClear): New helper
function.
* src/util/util.c (virTypedParameterArrayClear): Implement it.
* src/libvirt_private.syms (util.h): Export it.
Based on an initial patch by Hu Tao, with feedback from
Daniel P. Berrange.

Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-11 17:21:36 -07:00
Daniel P. Berrange
26ff8996b1 Fix naming of constant for disk event
All constants related to events should have a prefix of
VIR_DOMAIN_EVENT_

* include/libvirt/libvirt.h.in, src/qemu/qemu_domain.c:
  Rename VIR_DOMAIN_DISK_CHANGE_MISSING_ON_START to
  VIR_DOMAIN_EVENT_DISK_CHANGE_MISSING_ON_START
2011-11-04 12:16:19 +00:00
Eric Blake
319992d4b6 API: document scheduler parameter names
Document the parameter names that will be used by
virDomain{Get,Set}SchedulerParameters{,Flags}, rather than
hard-coding those names in each driver, to match what is
done with memory, blkio, and blockstats parameters.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SCHEDULER_CPU_SHARES)
(VIR_DOMAIN_SCHEDULER_VCPU_PERIOD)
(VIR_DOMAIN_SCHEDULER_VCPU_QUOTA, VIR_DOMAIN_SCHEDULER_WEIGHT)
(VIR_DOMAIN_SCHEDULER_CAP, VIR_DOMAIN_SCHEDULER_RESERVATION)
(VIR_DOMAIN_SCHEDULER_LIMIT, VIR_DOMAIN_SCHEDULER_SHARES): New
field name macros.
* src/qemu/qemu_driver.c (qemuSetSchedulerParametersFlags)
(qemuGetSchedulerParametersFlags): Use new defines.
* src/test/test_driver.c (testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters): Likewise.
* src/xen/xend_internal.c (xenDaemonGetSchedulerParameters)
(xenDaemonSetSchedulerParameters): Likewise.
* src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags)
(lxcGetSchedulerParametersFlags): Likewise.
* src/esx/esx_driver.c (esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
2011-11-02 13:52:56 -06:00
Sage Weil
536d1f8746 secret: add Ceph secret type
Add a new secret type to store a Ceph authentication key. The name
is simply an identifier for easy human reference.

The xml looks like this:

<secret ephemeral='no' private='no'>
 <uuid>0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f</uuid>
 <usage type='ceph'>
   <name>mycluster_admin</name>
 </usage>
</secret>

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.net>
2011-10-28 11:34:17 -06:00
Daniel P. Berrange
6aa27da287 Extend graphics event to include UNIX socket
Not all VNC/SPICE servers use a TCP socket for their connections.
It is possible to configure a UNIX socket server. The graphics
event must thus include a UNIX socket address type.

* include/libvirt/libvirt.h.in: Add UNIX socket address type
  for graphics event
* src/qemu/qemu_monitor_json.c: Add 'unix' string to address
  type enum
2011-10-28 10:23:53 +01:00
Daniel P. Berrange
9d96f1ce90 Introduce the virDomainOpenGraphics API
The virDomainOpenGraphics API allows a libvirt client to pass in
a file descriptor for an open socket pair, and get it connected
to the graphics display of the guest. This is limited to working
with local libvirt hypervisors connected over a UNIX domain
socket, since it will use UNIX FD passing

* include/libvirt/libvirt.h.in: Define virDomainOpenGraphics
* src/driver.h: Define driver for virDomainOpenGraphics
* src/libvirt_public.syms, src/libvirt.c: Entry point for
  virDomainOpenGraphics
* src/libvirt_internal.h: VIR_DRV_FEATURE_FD_PASSING
2011-10-28 10:23:51 +01:00
Michal Privoznik
baf2ff7e90 startupPolicy: Emit event on disk source dropping
If a disk source gets dropped because it is not accessible,
mgmt application might want to be informed about this. Therefore
we need to emit an event. The event presented in this patch
is however a bit superset of what written above. The reason is simple:
an intention to be easily expanded, e.g. on 'user ejected disk
in guest' events. Therefore, callback gets source string and disk alias
(which should be unique among a domain) and reason (an integer);
2011-10-25 09:27:10 +02:00
Daniel P. Berrange
777ffbd0e2 Allow for URI aliases when connecting to libvirt
This adds support for a libvirt client configuration file
either /etc/libvirt/libvirt.conf for privileged clients,
or $HOME/.libvirt/libvirt.conf for unprivileged clients.

It allows one parameter

 uri_aliases = [
   "hail=qemu+ssh://root@hail.cloud.example.com/system",
   "sleet=qemu+ssh://root@sleet.cloud.example.com/system",
 ]

Any call to virConnectOpen with a non-NULL URI will first
attempt to match against the uri_aliases list. An application
can disable this by using VIR_CONNECT_NO_ALIASES

* docs/uri.html.in: Document URI aliases
* include/libvirt/libvirt.h.in: Add VIR_CONNECT_NO_ALIASES
* libvirt.spec.in, mingw32-libvirt.spec.in: Add /etc/libvirt/libvirt.conf
* src/Makefile.am: Install default config file
* src/libvirt.c: Add support for URI aliases
* src/remote/remote_driver.c: Don't try to handle URIs
  with no scheme and which clearly are not paths
* src/util/conf.c: Don't raise error on virConfFree(NULL)
* src/xen/xen_driver.c: Don't raise error on URIs
  with no scheme
2011-10-19 09:14:34 +01:00
Philipp Hahn
0a71c79a34 Fix two comments related to error handling
Signed-off-by: Philipp Hahn <hahn@univention.de>
2011-10-17 17:21:56 +02:00
Michal Privoznik
4dadfe59d5 virDomainCoreDump: Introduce VIR_DUMP_RESET flag
This flag is intended to allow user to do so called system reset
after dump, instead of sending ACPI reboot event.
2011-10-13 09:32:27 +02:00
Eric Blake
8b6d1a2068 snapshot: add API for filtering by leaves
Counterpart to --roots.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_LIST_LEAVES):
New flag.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): Document it.
* tools/virsh.c (cmdSnapshotList): Expose it.
* tools/virsh.pod (snapshot-list): Document --leaves.
2011-10-12 16:03:19 -06:00
Eric Blake
f2013c9dd1 snapshot: new virDomainSnapshotListChildrenNames API
The previous API addition allowed traversal up the hierarchy;
this one makes it easier to traverse down the hierarchy.

In the python bindings, virDomainSnapshotNumChildren can be
generated, but virDomainSnapshotListChildrenNames had to copy
from the hand-written example of virDomainSnapshotListNames.

* include/libvirt/libvirt.h.in (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New prototypes.
(VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS): New flag alias.
* src/libvirt.c (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New functions.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSnapshotNumChildren)
(virDrvDomainSnapshotListChildrenNames): New callbacks.
* python/generator.py (skip_impl, nameFixup): Update lists.
* python/libvirt-override-api.xml: Likewise.
* python/libvirt-override.c
(libvirt_virDomainSnapshotListChildrenNames): New wrapper function.
2011-10-10 16:54:16 -06:00
Eric Blake
dbbe16c26e maint: typo fixes
I noticed a couple typos in recent commits, and fixed the remaining
instances of them.

* docs/internals/command.html.in: Fix spelling errors.
* include/libvirt/libvirt.h.in (virConnectDomainEventCallback):
Likewise.
* python/libvirt-override.py (virEventAddHandle): Likewise.
* src/lxc/lxc_container.c (lxcContainerChild): Likewise.
* src/util/hash.c (virHashCreateFull): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol): Likewise.
* src/esx/esx_driver.c (esxFormatVMXFileName): Likewise.
* src/vbox/vbox_tmpl.c (vboxIIDIsEqual_v3_x): Likewise.
2011-10-10 14:02:06 -06:00
Eric Blake
892719f657 maint: fix minor issues in virterror public header
Consistent use of tabs, fewer long lines, and a typo fix.

* include/libvirt/virterror.h: Fix typos, layout.
2011-10-05 12:33:59 -06:00
Eric Blake
3c797404a5 snapshot: add REVERT_FORCE to API
Although reverting to a snapshot is a form of data loss, this is
normally expected.  However, there are two cases where additional
surprises (failure to run the reverted state, or a break in
connectivity to the domain) can come into play.  Requiring extra
acknowledgment in these cases will make it less likely that
someone can get into an unrecoverable state due to a default revert.

Also create a new error code, so users can distinguish when forcing
would make a difference, rather than having to blindly request force.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_REVERT_FORCE):
New flag.
* src/libvirt.c (virDomainRevertToSnapshot): Document it.
* include/libvirt/virterror.h (VIR_ERR_SNAPSHOT_REVERT_RISKY): New
error value.
* src/util/virterror.c (virErrorMsg): Implement it.
* tools/virsh.c (cmdDomainSnapshotRevert): Add --force to virsh.
* tools/virsh.pod (snapshot-revert): Document it.
2011-10-05 11:33:36 -06:00
Guido Günther
ae37001d78 Document that ff callbacks need to be invoked from a clean stack.
Also fix a typo.
2011-10-04 20:29:46 +02:00
Xu He Jie
541ff63615 api: Add public api for 'reset'
Add new public api for 'reset'.
It can reset domain immediately without any guest shutdown.

Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
2011-09-29 06:52:42 -06:00
Eric Blake
a2f706de93 snapshot: new virDomainSnapshotGetParent API
Although a client can already obtain a snapshot's parent by
dumping and parsing the xml, then doing a snapshot lookup by
name, it is more efficient to get the parent in one step, which
in turn will make operations that must traverse a snapshot
hierarchy easier to perform.

* include/libvirt/libvirt.h.in (virDomainSnapshotGetParent):
Declare.
* src/libvirt.c (virDomainSnapshotGetParent): New function.
* src/libvirt_public.syms: Export it.
* src/driver.h (virDrvDomainSnapshotGetParent): New callback.
2011-09-28 09:54:56 -06:00
Jiri Denemark
d2d6776342 qemu: Introduce shutdown reason for paused state
Qemu sends STOP event as part of the shutdown process. Detect such STOP
event and consider shutdown to be reason of emitting such event. That's
the best we can do until qemu provides us the reason directly in STOP
event. This allows us to report shutdown reason for paused state so that
apps can detect domains that failed to finish the shutdown process
(e.g., because qemu is buggy and doesn't exit on SIGTERM or it is
blocked in flushing disk buffers).
2011-09-16 17:25:55 +02:00
Eric Blake
6c14439e51 snapshot: new APIs for inspecting snapshot object
These functions access internals of the opaque object, and do
not need any rpc counterpart.  It could be argued that we should
have provided these when snapshot objects were first introduced,
since all the other vir*Ptr objects have at least a GetName accessor.

* include/libvirt/libvirt.h.in (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): Declare.
* src/libvirt.c (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): New
functions.
* src/libvirt_public.syms: Export them.
2011-09-08 13:15:13 +01:00
Osier Yang
c843478ec8 latency: Define new public API and structure 2011-09-06 12:02:51 +08:00
Eric Blake
e03a62b456 snapshot: add flag for requesting disk snapshot
Prior to this patch, <domainsnapshot>/<disks> was ignored.  This
changes it to be an error unless an explicit disk snapshot is
requested (a future patch may relax things if it turns out to
be useful to have a <disks> specification alongside a system
checkpoint).

* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_DISK_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Disk
snapshots not supported yet.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Likewise.
2011-09-05 07:03:04 -06:00
Eric Blake
5b30b08d66 snapshot: support extra state in snapshots
In order to distinguish disk snapshots from system checkpoints, a
new state value that is only valid for snapshots is helpful.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_LAST): New placeholder.
* src/conf/domain_conf.h (virDomainSnapshotState): New enum mapping.
(VIR_DOMAIN_DISK_SNAPSHOT): New internal enum value.
* src/conf/domain_conf.c (virDomainState): Use placeholder.
(virDomainSnapshotState): Extend mapping by one for use in snapshot.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Handle new state.
(virDomainObjSetState, virDomainStateReasonToString)
(virDomainStateReasonFromString): Avoid compiler warnings.
* tools/virsh.c (vshDomainState, vshDomainStateReasonToString):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new functions.
* docs/schemas/domainsnapshot.rng: Tighten state definition.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: New test.
2011-09-05 07:03:04 -06:00
Eric Blake
6f66423e17 snapshot: allow halting after snapshot
Since a snapshot is fully recoverable, it is useful to have a
snapshot as a means of hibernating a guest, then reverting to
the snapshot to wake the guest up.  This mode of usage is
similar to 'virsh save/virsh restore', except that virsh
save uses an external file while virsh snapshot keeps the
vm state internal to a qcow2 file.  However, it only works on
persistent domains.

In the usage pattern of snapshot/revert for hibernating a guest,
there is no need to keep the guest running between the two points
in time, especially since that would generate runtime state that
would just be discarded.  Add a flag to make it possible to
stop the domain after the snapshot has completed.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_HALT):
New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotCreateActive): Implement it.
2011-09-05 07:03:04 -06:00
Eric Blake
3d77d0a644 snapshot: introduce new deletion flag
Reverting to a state prior to an external snapshot risks
corrupting any other branches in the snapshot hierarchy that
were using the snapshot as a read-only backing file.  So
disk snapshot code will default to preventing reverting to
a snapshot that has any children, meaning that deleting just
the children of a snapshot becomes a useful operation in
preparing that snapshot for being a future reversion target.
The code for the new flag is simple - it's one less deletion,
plus a tweak to keep the current snapshot correct.

* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotDelete): Document it, and
enforce mutual exclusion.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDelete): Implement
it.
2011-09-05 07:03:04 -06:00
Eric Blake
282fe1f08c snapshot: prevent stranding snapshot data on domain destruction
Just as leaving managed save metadata behind can cause problems
when creating a new domain that happens to collide with the name
of the just-deleted domain, the same is true of leaving any
snapshot metadata behind.  For safety sake, extend the semantic
change of commit b26a9fa9 to also cover snapshot metadata as a
reason to reject undefining an inactive domain.  A future patch
will make sure that shutdown of a transient domain automatically
deletes snapshot metadata (whether by destroy, shutdown, or
guest-initiated action).  Management apps of transient domains
should take care to capture xml of snapshots, if it is necessary
to recreate the snapshot metadata on a later transient domain
with the same name and uuid.

This also documents a new flag that hypervisors can choose to
support as a shortcut for taking care of the metadata as part of
the undefine process; however, nontrivial driver support for these
flags will be deferred to future patches.

Note that ESX and VBox can never be transient; therefore, they
do not have to worry about automatic cleanup after shutdown
(the persistent domain still remains); likewise they never
store snapshot metadata, so the undefine flag is trivial.
The nontrivial work remaining is thus in the qemu driver.

* include/libvirt/libvirt.h.in
(VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA): New flag.
* src/libvirt.c (virDomainUndefine, virDomainUndefineFlags):
Document new limitations and flag.
* src/esx/esx_driver.c (esxDomainUndefineFlags): Trivial
implementation.
* src/vbox/vbox_tmpl.c (vboxDomainUndefineFlags): Likewise.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Enforce
the limitations.
2011-09-02 21:57:33 -06:00
Eric Blake
af65695af0 snapshot: allow recreation of metadata
The first two flags are essential for being able to replicate
snapshot hierarchies across multiple hosts, which will come in
handy for supervised migrations.  It also allows a management app
to take a snapshot of a transient domain, save the metadata, stop
the domain, recreate a new transient domain by the same name,
redefine the snapshot, then revert to it.

This is not quite as convenient as leaving the metadata behind
after a domain is no longer around, but doing that has a few
problems: 1. the libvirt API can only delete snapshot metadata
if there is a valid domain handle to use to get to that snapshot
object - if stale data is left behind without a domain, there is
no way to request that the data be cleaned up. 2. creating a new
domain with the same name but different uuid than the older
domain where a snapshot existed cannot use the older snapshot
data; this risks confusing libvirt, and forbidding the stale
data is similar to the recent patch to forbid stale managed save.

The first two flags might be useful on hypervisors with no metadata,
but only for modifying the notion of the current snapshot;
however, I don't know how to do that for ESX or VBox.

The third flag is a convenience option, to combine a creation with
a delete metadata into one step.  It is trivial for hypervisors
with no metadata.

The qemu changes will be involved enough to warrant a separate patch.

* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE)
(VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT)
(VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags.
* src/libvirt.c (virDomainSnapshotCreateXML): Document them, and
enforce mutual exclusion.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial
implementation.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* docs/formatsnapshot.html.in: Document re-creation.
2011-09-02 17:44:42 -06:00
Eric Blake
9f5e53e211 snapshot: identify which snapshots have metadata
To make it easier to know when undefine will fail because of existing
snapshot metadata, we need to know how many snapshots have metadata.

Also, it is handy to filter the list of snapshots to just those that
have no parents; document that flag now, but implement it in later patches.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_LIST_ROOTS)
(VIR_DOMAIN_SNAPSHOT_LIST_METADATA): New flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotListNames): Document them.
* src/esx/esx_driver.c (esxDomainSnapshotNum)
(esxDomainSnapshotListNames): Implement trivial flag.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotNum)
(vboxDomainSnapshotListNames): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNum)
(qemuDomainSnapshotListNames): Likewise.
2011-09-02 16:58:36 -06:00
Eric Blake
795fe9b2fa snapshot: allow deletion of just snapshot metadata
A future patch will make it impossible to remove a domain if it
would leave behind any libvirt-tracked metadata about snapshots,
since stale metadata interferes with a new domain by the same name.
But requiring snaphot contents to be deleted before removing a
domain is harsh; with qemu, qemu-img can still make use of the
contents after the libvirt domain is gone.  Therefore, we need
an option to get rid of libvirt tracking information, but not
the actual contents.  For hypervisors that do not track any
metadata in libvirt, the implementation is trivial; all remaining
hypervisors (really, just qemu) will be dealt with separately.

* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotDelete): Document it.
* src/esx/esx_driver.c (esxDomainSnapshotDelete): Trivially
supported when there is no libvirt metadata.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotDelete): Likewise.
2011-09-02 16:51:33 -06:00
Eric Blake
3cff66f487 snapshot: fine-tune ability to start paused
While it is nice that snapshots and saved images remember whether
the domain was running or paused, sometimes the restoration phase
wants to guarantee a particular state (paused to allow hot-plugging,
or running without needing to call resume).  This introduces new
flags to allow the control, and a later patch will implement the
flags for qemu.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SAVE_RUNNING)
(VIR_DOMAIN_SAVE_PAUSED, VIR_DOMAIN_SNAPSHOT_REVERT_RUNNING)
(VIR_DOMAIN_SNAPSHOT_REVERT_PAUSED): New flags.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags)
(virDomainManagedSave, virDomainSaveImageDefineXML)
(virDomainRevertToSnapshot): Document their use, and enforce
mutual exclusion.
2011-09-02 10:00:06 -06:00
Eric Blake
c1ff5dc63d snapshot: better events when starting paused
There are two classes of management apps that track events - one
that only cares about on/off (and only needs to track EVENT_STARTED
and EVENT_STOPPED), and one that cares about paused/running (also
tracks EVENT_SUSPENDED/EVENT_RESUMED).  To keep both classes happy,
any transition that can go from inactive to paused must emit two
back-to-back events - one for started and one for suspended (since
later resuming of the domain will only send RESUMED, but the first
class isn't tracking that).

This also fixes a bug where virDomainCreateWithFlags with the
VIR_DOMAIN_START_PAUSED flag failed to start paused when restoring
from a managed save image.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_EVENT_SUSPENDED_RESTORED)
(VIR_DOMAIN_EVENT_SUSPENDED_FROM_SNAPSHOT)
(VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT): New sub-events.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Use them.
(qemuDomainSaveImageStartVM): Likewise, and add parameter.
(qemudDomainCreate, qemuDomainObjStart): Send suspended event when
starting paused.
(qemuDomainObjRestore): Add parameter.
(qemuDomainObjStart, qemuDomainRestoreFlags): Update callers.
* examples/domain-events/events-c/event-test.c
(eventDetailToString): Map new detail strings.
2011-09-02 10:00:06 -06:00
Osier Yang
27758859c7 storage: Add fs pool formatting
This patch adds the ability to make the filesystem for a filesystem
pool during a pool build.

The patch adds two new flags, no overwrite and overwrite, to control
when mkfs gets executed.  By default, the patch preserves the
current behavior, i.e., if no flags are specified, pool build on a
filesystem pool only makes the directory on which the filesystem
will be mounted.

If the no overwrite flag is specified, the target device is checked
to determine if a filesystem of the type specified in the pool is
present.  If a filesystem of that type is already present, mkfs is
not executed and the build call returns an error.  Otherwise, mkfs
is executed and any data present on the device is overwritten.

If the overwrite flag is specified, mkfs is always executed, and any
existing data on the target device is overwritten unconditionally.
2011-09-02 21:16:58 +08:00
Jim Fehlig
b12354befe Add public API for getting migration speed
Includes impl of python binding since the generator was not
able to cope.

Note: Requires gendispatch.pl patch from Matthias Bolte

https://www.redhat.com/archives/libvir-list/2011-August/msg01367.html
2011-09-01 11:26:21 -06:00
Eric Blake
27c8526053 start: allow discarding managed save
There have been several instances of people having problems with
a broken managed save file, and not aware that they could use
'virsh managedsave-remove dom' to fix things.  Making it possible
to do this as part of starting a domain makes the same functionality
easier to find, and one less API call.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_START_FORCE_BOOT): New
flag.
* src/libvirt.c (virDomainCreateWithFlags): Document it.
* src/qemu/qemu_driver.c (qemuDomainObjStart): Alter signature.
(qemuAutostartDomain, qemuDomainStartWithFlags): Update callers.
* tools/virsh.c (cmdStart): Expose it in virsh.
* tools/virsh.pod (start): Document it.
2011-08-30 09:26:47 -06:00
Matthias Bolte
4d6e6f4aa9 hyperv: Add driver skeleton 2011-08-26 17:52:55 +02:00
Daniel P. Berrange
ce93f64b1e Fix keymap used to talk with QEMU
The QEMU 'sendkey' command expects keys to be encoded in the same
way as the RFB extended keycode set. Specifically it wants extended
keys to have the high bit of the first byte set, while the Linux
XT KBD driver codeset uses the low bit of the second byte. To deal
with this we introduce a new keymap 'RFB' and use that in the QEMU
driver

* include/libvirt/libvirt.h.in: Add VIR_KEYCODE_SET_RFB
* src/qemu/qemu_driver.c: Use RFB keycode set instead of XT KBD
* src/util/virkeycode-mapgen.py: Auto-generate the RFB keycode
  set from the XT KBD set
* src/util/virkeycode.c: Add RFB keycode entry to table. Add a
  verify check on cardinality of the codeOffset table
2011-08-26 14:18:57 +01:00
Peter Krempa
6c55124f37 storage: Directory shouldn't be listed as type 'file'
Fix internals of libvirt for new storage volume type.
Libvirt reported an invalid type of the volume.

BZ #727088
2011-08-11 13:34:26 -06:00
Eric Blake
ff81956ac6 maint: add missing copyright notices
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.

* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
2011-07-28 15:01:17 -06:00
Jiri Denemark
d58e91a812 qemu: Migration job on source daemon
Make MIGRATION_OUT use the new helper methods.

This also introduces new protection to migration v3 process: the
migration job is held from Begin to Confirm to avoid changes to a domain
during migration (esp. between Begin and Perform phases). This change is
automatically applied to p2p and tunneled migrations. For normal
migration, this requires support from a client. In other words, if an
old (pre 0.9.4) client starts normal migration of a domain, the domain
will not be protected against changes between Begin and Perform steps.
2011-07-27 08:45:10 -06:00
Adam Litke
d489b04628 Asynchronous event for BlockJob completion
When an operation started by virDomainBlockPull completes (either with
success or with failure), raise an event to indicate the final status.
This API allow users to avoid polling on virDomainGetBlockJobInfo if
they would prefer to use an event mechanism.

* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/remote_protocol-structs: structure definitions for protocol verification
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
  from QEMU monitor
2011-07-22 13:57:42 +08:00
Adam Litke
152e810388 Add new API virDomainBlockPull* to headers
Set up the types for the block pull functions and insert them into the
virDriver structure definition.  Symbols are exported in this patch to
prevent
documentation compile failures.

* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings
* are
  implemented later
* src/libvirt_public.syms: export symbols
* docs/apibuild.py: Extend 'unsigned long' parameter exception to this
* API
2011-07-22 13:18:06 +08:00
Eric Blake
d2a929d4b3 save: new API to manipulate save file images
Modifying the xml on either save or restore only gets you so
far - you have to remember to 'virsh dumpxml dom' just prior
to the 'virsh save' in order to have an xml file worth modifying
that won't be rejected due to abi breaks.  To make this more
powerful, we need a way to grab the xml embedded within a state
file, and from there, it's not much harder to also support
modifying a state file in-place.

Also, virDomainGetXMLDesc didn't document its flags.

* include/libvirt/libvirt.h.in (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New prototypes.
* src/libvirt.c (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveImageGetXMLDesc)
(virDrvDomainSaveImgeDefineXML): New driver callbacks.
2011-07-21 17:11:07 -06:00
Eric Blake
1700345708 error: add new error type for reflecting partial API support
VIR_ERR_INVALID_ARG implies that an argument cannot possibly
be correct, given the current state of the API.
VIR_ERR_CONFIG_UNSUPPORTED implies that a configuration is
wrong, but arguments aren't configuration.
VIR_ERR_NO_SUPPORT implies that a function is completely
unimplemented.

But in the case of a function that is partially implemented,
yet the full power of the API is not available for that
driver, none of the above messages make sense.  Hence a new
error message, implying that the argument is known to comply
with the current state of the API, and that while the driver
supports aspects of the function, it does not support that
particular use of the argument.

A good use case for this is a driver that supports
virDomainSaveFlags, but not the dxml argument of that API.

It might be feasible to also use this new error for all functions
that check flags, and which accept fewer flags than what is possible
in the public API.  But doing so would get complicated, since
neither libvirt.c nor the remote driver may do flag filtering,
and every other driver would have to do a two-part check, first
using virCheckFlags on all public flags (which gives
VIR_ERR_INVALID_ARG for an impossible flag), followed by a
particular mask check for VIR_ERR_ARGUMENT_UNSUPPORTED (for a
possible public flag but unsupported by this driver).

* include/libvirt/virterror.h (VIR_ERR_ARGUMENT_UNSUPPORTED): New
error.
* src/util/virterror.c (virErrorMsg): Give it a message.
Suggested by Daniel P. Berrange.
2011-07-21 16:04:56 -06:00
Michal Privoznik
080bc4ea02 destroy: Define new public API virDomainDestroyFlags
This introduces new API virDomainDestroyFlags to allow
domain destroying with flags, as the existing API virDomainDestroy
misses flags.

The set of flags is defined in virDomainDestroyFlagsValues enum,
which is currently commented, because it is empty.

Calling this API with no flags set (@flags == 0) is equivalent calling
virDomainDestroy.
2011-07-21 20:38:35 +02:00
Eric Blake
ad0b912384 save: new public API to bypass file system cache on save/restore
In order to choose whether to use O_DIRECT when saving a domain image
to a file, we need a new flag.  But virDomainSave was implemented
before our policy of all new APIs having a flag argument.  Likewise
for virDomainRestore when restoring from a file.

The new flag name is chosen as CACHE_BYPASS so as not to preclude
a future solution that uses posix_fadvise once the Linux kernel has
a smarter implementation of that interface.

* include/libvirt/libvirt.h.in (virDomainCreateFlags)
(virDomainCoreDumpFlags): Add a flag.
(virDomainSaveFlags, virDomainRestoreFlags): New prototypes.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveFlags, virDrvDomainRestoreFlags):
New driver callbacks.
2011-07-21 10:34:51 -06:00
Lai Jiangshan
0bbf87e91e util: add virtkeycode module
Add virtkey lib for usage-improvment and keycode translating.
Add 4 internal API for the aim

const char *virKeycodeSetTypeToString(int codeset);
int virKeycodeSetTypeFromString(const char *name);
int virKeycodeValueFromString(virKeycodeSet codeset, const char *keyname);
int virKeycodeValueTranslate(virKeycodeSet from_codeset,
                             virKeycodeSet to_offset,
                             int key_value);

* include/libvirt/libvirt.h.in: extend virKeycodeSet enum
* src/Makefile.am: add new virtkeycode module and rule to generate
  virkeymaps.h
* src/util/virkeycode.c src/util/virkeycode.h: new module
* src/util/virkeycode-mapgen.py: python generator for virkeymaps.h
  out of keymaps.csv
* src/libvirt_private.syms: extend private symbols for new module
* .gitignore: add generated virkeymaps.h
2011-07-21 15:57:47 +08:00
Osier Yang
b26a9fa9c2 undefine: Define the new API
This introduces a new API virDomainUndefineFlags to control the
domain undefine process, as the existing API virDomainUndefine
doesn't support flags.

Currently only flag VIR_DOMAIN_UNDEFINE_MANAGED_SAVE is supported.
If the domain has a managed save image, including
VIR_DOMAIN_UNDEFINE_MANAGED_SAVE in @flags will also remove that
file, and omitting the flag will cause undefine process to fail.

This patch also changes the behavior of virDomainUndefine, if the
domain has a managed save image, the undefine will be refused.
2011-07-20 10:59:54 +08:00
Taku Izumi
ceb0ed5d97 setvcpus: extend virDomainSetVcpusFlags API to support current flag
This patch extends virDomainSetVcpusFlags API to support
VIR_DOMAIN_AFFECT_CURRENT flag.

Now because most APIs accept VIR_DOMAIN_AFFECT_CURRENT flags,
virDomainSetVcpusFlags API should also do.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-07-15 08:19:24 -06:00
Daniel P. Berrange
639f841346 Define a QEMU specific API to attach to a running QEMU process
Introduce a new API in libvirt-qemu.so

 virDomainPtr virDomainQemuAttach(virConnectPtr domain,
                                  unsigned long long pid,
                                  unsigned int flags);

This allows libvirtd to attach to an existing, externally
launched QEMU process. This is useful for QEMU developers who
prefer to launch QEMU themselves for debugging/devel reasons,
but still want the benefit of libvirt based tools like
virt-top, virt-viewer, etc

* include/libvirt/libvirt-qemu.h: Define virDomainQemuAttach
* src/driver.h, src/libvirt-qemu.c, src/libvirt_qemu.syms:
  Driver glue for virDomainQemuAttach
2011-07-12 15:39:03 +01:00
Eric Blake
18d561c7a4 public API: prefer unsigned int for flags
Most APIs use 'unsigned int flags'; but a few stragglers were using
a signed value.  In particular, the vir*GetXMLDesc APIs were
split-brain, with inconsistent choice of types.  Although it is
an API break to use 'int' instead of 'unsigned int', it is ABI
compatible (pre-compiled apps will have no difference in behavior),
and generally apps can be recompiled without any issue (only rare
apps that compiled with extremely high warning levels, or which
pass libvirt API around as typed function pointers, would have to
make any code changes to deal with the change).

The migrate APIs use 'unsigned long flags', which can't be changed,
due to ABI constraints.

This patch intentionally touches only the public API, to prove the
claim that most existing code (including driver callbacks and virsh)
still compiles just fine in spite of the type change.

* include/libvirt/libvirt.h.in (virConnectOpenAuth)
(virDomainCoreDump, virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc): Use unsigned int for flags.
(virDomainHasCurrentSnapshot): Use consistent spelling.
* src/libvirt.c (virConnectOpenAuth, virDomainCoreDump)
(virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc, do_open): Update accordingly.
2011-07-07 14:15:32 -06:00
Matthias Bolte
f0739fc579 Add node prefix to virNodeGet(CPU|Memory)Stats structs and defines 2011-06-28 17:18:33 +02:00
Eric Blake
28e45afc3f build: rename Vcpupin to VcpuPin
We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words.  Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling.  For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.

* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.
2011-06-27 09:55:11 -06:00
Taku Izumi
e261987c5a vcpupin: introduce the new libvirt API (virDomainGetVcpupinInfo)
This patch introduces a new libvirt API (virDomainGetVcpupinInfo),
as a counterpart to virDomainPinVcpuFlags.

We can use virDomainGetVcpus API to retrieve CPU affinity information,
but can't use this API against inactive domains (at least in case of KVM),
as it lacks a flags parameter.
The usual thing is to add a new virDomainGetVcpusFlags, but that API name
is already occupied by the counterpart to virDomainGetMaxVcpus, which
has a completely different signature.

The virDomainGetVcpupinInfo is the new API to retrieve CPU affinity
information of active and inactive domains.  While the usual convention
is to list an array before its length, this API violates that rule
in order to be more like virDomainGetVcpus (where maxinfo was doing
double-duty as the length of two different arrays).

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-06-24 17:00:22 -06:00
Eric Blake
1aa859d633 Revert "Add new API virDomainBlockPull* to headers"
This reverts commit 7d56a16d03.

Conflicts:

	python/generator.py
	src/libvirt_public.syms
2011-06-24 08:41:25 -06:00
Eric Blake
c4c59e7228 Revert "Asynchronous event for BlockPull completion"
This reverts commit 12cd77a0c5.

Conflicts:

	python/libvirt-override-virConnect.py
	python/libvirt-override.c
	src/remote/remote_protocol.x
2011-06-24 08:41:24 -06:00
Daniel P. Berrange
3ba937da42 Allow automatic kill of guests when a connection is closed
If an application is using libvirt + KVM as a piece of its
internal infrastructure to perform a specific task, it can
be desirable to guarentee the VM dies when the virConnectPtr
disconnects from libvirtd. This ensures the app can't leak
any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as
a flag when starting guests enables this to be done.

* include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL
* src/qemu/qemu_driver.c: Support automatic killing of guests
  upon connection close
* tools/virsh.c: Add --autokill flag to 'start' and 'create'
  commands
2011-06-24 12:15:10 +01:00
Cole Robinson
6094ad7bd7 Promote virEvent*Handle/Timeout to public API
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.

v2:
    Actually add APIs to libvirt.h
2011-06-21 10:08:47 -04:00
Jiri Denemark
67cc825dda Introduce virDomainGetControlInfo API
The API can be used to query current state of an interface to VMM used
to control a domain. In QEMU world this translates into monitor
connection.
2011-06-16 18:26:12 +02:00
Eric Blake
1d57562942 sendkey: use consistent API convention
Even though rpc uses 'unsigned int' for the _len parameter that
passes the length of item<length>, the public libvirt APIs all
use 'int' and filter out lengths < 0, except for virDomainSendKey.

* include/libvirt/libvirt.h.in (virDomainSendKey): All other APIs
use int for array length.
* src/libvirt.c (virDomainSendKey): Adjust.
* src/driver.h (virDrvDomainSendKey): Likewise.
* daemon/remote_generator.pl: Likewise.
2011-06-15 11:25:53 -06:00
Matthias Bolte
6c88f1194c Fix apibuild.py warnings about missing comment headers
Also improve wording of some comments.
2011-06-15 17:03:12 +02:00
Adam Litke
12cd77a0c5 Asynchronous event for BlockPull completion
When an operation started by virDomainBlockPullAll completes (either with
success or with failure), raise an event to indicate the final status.  This
allows an API user to avoid polling on virDomainBlockPullInfo if they would
prefer to use the event mechanism.

* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
  from QEMU monitor

Signed-off-by: Adam Litke <agl@us.ibm.com>
2011-06-14 22:48:42 -06:00
Adam Litke
7d56a16d03 Add new API virDomainBlockPull* to headers
Set up the types for the block pull functions and insert them into the
virDriver structure definition.  Symbols are exported in this patch to prevent
documentation compile failures.

* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings are
  implemented later
* src/libvirt_public.syms: export symbols

Signed-off-by: Adam Litke <agl@us.ibm.com>
2011-06-14 21:20:11 -06:00
Minoru Usui
0c5ce68525 virNodeGetMemoryStats: Implement public API
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
2011-06-14 16:17:17 -06:00
Minoru Usui
625aa63eea virNodeGetMemoryStats: Expose new API
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
2011-06-14 16:07:47 -06:00
Minoru Usui
1f873744c8 virNodeGetCPUStats: Expose new API
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
2011-06-14 14:48:45 -06:00
Lai Jiangshan
973564094f send-key: Defining the public API
Add public virDomainSendKey() and enum libvirt_keycode_set
for the @codeset.

Python version of virDomainSendKey() has not been implemented yet,
it will be done soon.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2011-06-14 13:00:21 -06:00
Eric Blake
ccf7c4b9ed docs: improve VIR_DOMAIN_AFFECT_CURRENT description
* include/libvirt/libvirt.h.in (virDomainModificationImpact): Reword.
2011-06-14 09:17:57 -06:00
Osier Yang
41514f7b3e qemu: Parse current balloon value returned by query_balloon
Qemu once supported following memory stats which will returned by
"query_balloon":

    stat_put(dict, "actual", actual);
    stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]);
    stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]);
    stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]);
    stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]);
    stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]);
    stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]);

But it later disabled all the stats except "actual" by commit
07b0403dfc2b2ac179ae5b48105096cc2d03375a.

libvirt doesn't parse "actual", so user will always see a empty result
with "virsh dommemstat $domain". Even qemu haven't disabled the stats,
we should support parsing "actual".
2011-06-14 11:21:35 +08:00
Hu Tao
fbd7820b2c Deprecate several CURRENT/LIVE/CONFIG enums
This patch deprecates following enums:

VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG

VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG

VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG

And modify internal codes to use virDomainModificationImpact.
2011-06-13 14:17:16 -06:00
Taku Izumi
070829cc16 vcpupin: introduce a new libvirt API (virDomainPinVcpuFlags)
This patch introduces a new libvirt API virDomainPinVcpuFlags,
a direct extension from the existing virDomainPinVcpu
2011-06-13 23:35:54 +08:00
Eric Blake
33d90bafe7 API: consolidate common unreleased enums
This commit is safe precisely because there has been no release
for any of the enum values being deleted (they were added post-0.9.1).

After the 0.9.2 release, we can then take advantage of
virDomainModificationImpact in more places.

* include/libvirt/libvirt.h.in (virDomainModificationImpact): New
enum.
(virDomainSchedParameterFlags, virMemoryParamFlags): Delete, since
these were never released, and the new enum works fine here.
* src/libvirt.c	(virDomainGetMemoryParameters)
(virDomainSetMemoryParameters)
(virDomainGetSchedulerParametersFlags)
(virDomainSetSchedulerParametersFlags): Update documentation.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryParameters)
(qemuDomainGetMemoryParameters, qemuSetSchedulerParametersFlags)
(qemuSetSchedulerParameters, qemuGetSchedulerParametersFlags)
(qemuGetSchedulerParameters): Adjust clients.
* tools/virsh.c (cmdSchedinfo, cmdMemtune): Likewise.
Based on ideas by Daniel Veillard and Hu Tao.
2011-06-04 09:58:53 +02:00
Daniel P. Berrange
6a943419c5 Basic framework for lock manager plugins
Define the basic framework lock manager plugins. The
basic plugin API for 3rd parties to implemented is
defined in

  src/locking/lock_driver.h

This allows dlopen()able modules for alternative locking
schemes, however, we do not install the header. This
requires lock plugins to be in-tree allowing changing of
the lock manager plugin API in future.

The libvirt code for loading & calling into plugins
is in

  src/locking/lock_manager.{c,h}

* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_LOCKING
* src/locking/lock_driver.h: API for lock driver plugins
  to implement
* src/locking/lock_manager.c, src/locking/lock_manager.h:
  Internal API for managing locking
* src/Makefile.am: Add locking code
2011-06-02 10:54:00 +01:00
Matthias Bolte
99110a6eff Fix virTypedParameter alias comments
Remove the Domain prefix from the comments.
2011-05-31 09:03:06 +02:00
Daniel P. Berrange
a6135ec1e6 Introduce a new event emitted when a virtualization failure occurs
This introduces a new domain

  VIR_DOMAIN_EVENT_ID_CONTROL_ERROR

Which uses the existing generic callback

typedef void (*virConnectDomainEventGenericCallback)(virConnectPtr conn,
                                                     virDomainPtr dom,
                                                     void *opaque);

This event is intended to be emitted when there is a failure in
some part of the domain virtualization system. Whether the domain
continues to run/exist after the failure is an implementation
detail specific to the hypervisor.

The idea is that with some types of failure, hypervisors may
prefer to leave the domain running in a "degraded" mode of
operation. For example, if something goes wrong with the QEMU
monitor, it is possible to leave the guest OS running quite
happily. The mgmt app will simply loose the ability todo various
tasks. The mgmt app can then choose how/when to deal with the
failure that occured.
* daemon/remote.c: Dispatch of new event
* examples/domain-events/events-c/event-test.c: Demo catch
  of event
* include/libvirt/libvirt.h.in: Define event ID and callback
* src/conf/domain_event.c, src/conf/domain_event.h: Internal
  event handling
* src/remote/remote_driver.c: Receipt of new event from daemon
* src/remote/remote_protocol.x: Wire protocol for new event
* src/remote_protocol-structs: add new event for checks
2011-05-29 20:21:53 +08:00
Eric Blake
bc4ee58972 sched: introduce virDomainGetSchedulerParametersFlags
If we can choose live or config when setting, then we need to
be able to choose which one we are querying.

Also, make the documentation clear that set must use a non-empty
subset (some of the hypervisors fail if params is NULL).

* include/libvirt/libvirt.h.in
(virDomainGetSchedulerParametersFlags): New prototype.
* src/libvirt.c (virDomainGetSchedulerParametersFlags): Implement
it.
* src/libvirt_public.syms: Export it.
* python/generator.py (skip_impl): Don't auto-generate.
* src/driver.h (virDrvDomainGetSchedulerParametersFlags): New
callback.
2011-05-29 18:38:10 +08:00
Eric Blake
a9b3a78fa6 libvirt.h: avoid regression, and document preferred name
Commit 824dcaff was a regression (thankfully unreleased) for any
client code that used 'struct _virSchedParameter' directly rather
than the preferred virSchedParameter typedef.  Adding a #define
avoids even that API change, while rearranging the file makes it
clear what the old vs. new API is.

* include/libvirt/libvirt.h.in: Rearrange older names to the
bottom and improve documentation on preferred names.
(virDomainGetSchedulerParameters, virDomainSetSchedulerParameters)
(virDomainSetSchedulerParametersFlags)
(virDomainSetBlkioParameters, virDomainGetBlkioParameters)
(virDomainSetMemoryParameters, virDomainGetMemoryParameters):
Use newer type names.
* python/libvirt-override.c: Adjust code generation to cope.
Suggested by Daniel P. Berrange.
2011-05-29 18:24:20 +08:00
Michal Privoznik
ba0b5934b3 interface: new public API for network config change transactions
This is the API agreed on in:

  https://www.redhat.com/archives/libvir-list/2011-May/msg00026.html

(with a slight name change to use "...begin" rather than
"...start"). This implements transactional changes to the host network
config. When a transaction is begun with ncf_change_begin(), all other
netcf APIs will continue to work as they always have, but a snapshot
of the existing config will be taken, allowing reversion (rollback,
using ncf_change_rollback()) to the exact state of config at the time
ncf_change_begin() was called. Alternately, if it's determined that
the new changes are acceptable, ncf_change_commit() can be called,
which will eliminate the snapshot and make the changes permanent.

As a failsafe measure, if neither ncf_change_commit() or
ncf_change_rollback() is called by the next time the system reboots,
the netcf-transaction initscript will be automatically called to
rollback the changes.
2011-05-27 14:28:23 -04:00
Hu Tao
118eac373d Add new flags for setting memory parameters
The new flags allow to pick current state, config or the live
parameter, with current being the existing API default (0).
This also hooks this to --config, --live, --current parameters for
the memtune virsh command

* include/libvirt/libvirt.h.in: defines the new flags
* tools/virsh.c: adds support at virsh level
* tools/virsh.pod: updates virsh documentation
2011-05-27 15:35:11 +08:00
Daniel P. Berrange
1355541662 Introduce two method migration APIs
There are two pieces of information which are desirable for
migration, which cannot be supplied by applications

 - The explicit QEMU migration URI, while using Peer2Peer
   migration
 - An override for the target VM XML

This introduces two new public APIs to support these extra
parameters. There is no need for extra wire protocool changes,
since this is supported by the v3 migration enhancements

* include/libvirt/libvirt.h.in,
  src/libvirt.c, src/libvirt_public.syms: Add virDomainMigrate2
  and virDomainMigrateToURI2
2011-05-25 11:47:48 -04:00
Eric Blake
824dcaff78 libvirt.h: consolidate typed parameter handling
The new type is identical to the three old types that it replaces,
and by creating a common type, this allows future patches to share
common code that manipulates typed parameters.

This change is backwards-compatible in API (recompilation works
without any edits) and ABI (an older client that has not been
recompiled uses the same layout) for code using only public
names; only code using private names (those beginning with _)
will have to adapt.

* include/libvirt/libvirt.h.in (virTypedParameterType)
(VIR_TYPED_PARAM_FIELD_LENGTH, _virTypedParameter): New enum,
macro, and type.
(virSchedParameter, virBlkioParameter, virMemoryParameter):
Rewrite in terms of a common type, while keeping all old public
names for backwards compatibility.
(struct _virSchedParameter, struct _virBlkioParameter)
(struct _virMemoryParameter): Delete - these are private names.
* python/generator.py (enum): Cope with the refactoring.
2011-05-18 08:40:28 -06:00
Eric Blake
33645d44f9 sched: adjust parameter values to make current = 0
See virDomainMemoryModFlags for precedent.

* include/libvirt/libvirt.h.in (virDomainSchedParameterFlags): Set
CURRENT as a synonym to 0.
2011-05-17 10:02:07 -06:00
Hu Tao
d4b8a35755 introduce virDomainSetSchedulerParametersFlags
This new function allows aditional flags to be passed into from
the virsh command line.
2011-05-17 09:37:46 -06:00
Jiri Denemark
d65a924b34 virDomainGetState public API
This API is supposed to replace virDomainGetInfo when the only purpose
of calling it is getting current domain status.
2011-05-16 10:04:18 +02:00
Michal Privoznik
6a1fcd9f20 screenshot: Defining the public API
Add public API for taking screenshots of current domain console.

* include/libvirt/libvirt.h.in: add virDomainScreenshot
* src/libvirt_public.syms: Export new symbol
2011-05-13 12:35:45 +02:00
Lai Jiangshan
b08ad6cd87 inject-nmi: Defining the public API 2011-05-10 11:40:51 -06:00
Eric Blake
99fa30804b maint: fix grammar errors
Jim Meyering recently improved gnulib to catch various grammar
errors during 'make syntax-check'.

* .gnulib: Update to latest, for syntax-check improvements.
* include/libvirt/libvirt.h.in (virConnectAuthCallbackPtr): Use
cannot rather than two words.
* src/driver.c: Likewise.
* src/driver.h (VIR_SECRET_GET_VALUE_INTERNAL_CALL): Likewise.
* src/remote/remote_driver.c (initialize_gnutls): Likewise.
* src/util/pci.c (pciBindDeviceToStub): Likewise.
* src/storage/storage_backend.c (virStorageBackendCreateQemuImg):
Likewise.
(virStorageBackendUpdateVolTargetInfoFD): Avoid doubled word.
* docs/formatdomain.html.in: Likewise.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_can_not)
(exclude_file_name_regexp--sc_prohibit_doubled_word): Exclude
existing translation problems.
2011-04-12 09:06:14 -06:00
Taku Izumi
e3b4ca21b2 maxmem: introduces VIR_DOMAIN_MEM_MAXIMUM flag
This patch introduces VIR_DOMAIN_MEM_MAXIMUM flag.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-04-08 16:38:00 -06:00
Taku Izumi
0f2e50be5f setmem: introduce VIR_DOMAIN_MEM_CURRENT flag
This patch introduces VIR_DOMAIN_MEM_CURRENT flag and
modifies virDomainSetMemoryFlags function to support it.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-04-07 17:13:56 -06:00
Daniel P. Berrange
7300f68dff Add public APIs for storage volume upload/download
New APIs are added allowing streaming of content to/from
storage volumes.

* include/libvirt/libvirt.h.in: Add virStorageVolUpload and
  virStorageVolDownload APIs
* src/driver.h, src/libvirt.c, src/libvirt_public.syms: Stub
  code for new APIs
* src/storage/storage_driver.c, src/esx/esx_storage_driver.c:
  Add dummy entries in driver table for new APIs
2011-03-29 12:17:33 +01:00
Daniel P. Berrange
4591df766d Remove the Open Nebula driver
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.

Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.

The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.

Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.

* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
  ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
  src/opennebula/one_conf.c, src/opennebula/one_conf.h,
  src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
  files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
  build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
  to OpenNebula
* docs/drvone.html.in: Delete file
2011-03-28 14:09:11 +01:00
Daniel P. Berrange
cb4aba9b6a Add public API for setting migration speed on the fly
It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions

* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
  include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/vmware/vmware_driver.c, src/xen/xen_driver.c,
  src/libxl/libxl_driver.c: Stub new API
2011-03-22 15:53:08 +00:00
Jim Fehlig
2b84e445d5 Add libxenlight driver
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0.  The driver is stateful and runs
privileged only.

Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI.  Driver selection is based on the status
of xend.  If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified.  If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.

V6:
 - Address several code style issues noted by Daniel Veillard
 - Make drive work with xen:/// URI
 - Hold domain object reference while domain is injected in
   libvirt event loop.  Race found and fixed by Markus Groß.

V5:
 - Ensure events are unregistered when domain private data
   is destroyed.  Discovered and fixed by Markus Groß.

V4:
 - Handle restart of libvirtd, reconnecting to previously
   started domains
 - Rebased to current master
 - Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)

V3:
  - Reserve vnc port within driver when autoport=yes

V2:
  - Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
  - Rebased to current master
  - Plug memory leaks found by Stefano Stabellini and valgrind
  - Handle SHUTDOWN_crash domain death event

[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
2011-03-18 08:57:48 -06:00
Nikunj A. Dadhania
78ba748ef1 virsh: fix memtune's help message for swap_hard_limit
* Correct the documentation for cgroup: the swap_hard_limit indicates
  mem+swap_hard_limit.
* Change cgroup private apis to: virCgroupGet/SetMemSwapHardLimit

Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
2011-03-17 16:45:06 -06:00
Matthias Bolte
5cc370aa36 Don't use INT64_MAX in libvirt.h because it requires stdint.h
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED uses INT64_MAX but stdint.h
was not and should not be included. Therefore, libvirt.h was
not self-contained.

Instead of including stdint.h specify the value directly.
2011-03-11 22:08:24 +01:00
Gui Jianfeng
13c5282122 libvirt: add virDomain{Get,Set}BlkioParameters
Add virDomainSetBlkioParameters virDomainGetBlkioParameters

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
2011-03-10 17:53:16 -07:00
Taku Izumi
e8340a8b79 setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-03-10 15:02:58 -07:00
Daniel P. Berrange
2ed6cc7bec Expose event loop implementation as a public API
Not all applications have an existing event loop they need
to integrate with. Forcing them to implement the libvirt
event loop integration APIs is an undue burden. This just
exposes our simple poll() based implementation for apps
to use. So instead of calling

   virEventRegister(....callbacks...)

The app would call

   virEventRegisterDefaultImpl()

And then have a thread somewhere calling

    static bool quit = false;
    ....
    while (!quit)
      virEventRunDefaultImpl()

* daemon/libvirtd.c, tools/console.c,
  tools/virsh.c: Convert to public event loop APIs
* include/libvirt/libvirt.h.in, src/libvirt_private.syms: Add
  virEventRegisterDefaultImpl and virEventRunDefaultImpl
* src/util/event.c: Implement virEventRegisterDefaultImpl
  and virEventRunDefaultImpl using poll() event loop
* src/util/event_poll.c: Add full error reporting
* src/util/virterror.c, include/libvirt/virterror.h: Add
  VIR_FROM_EVENTS
2011-03-07 14:16:13 +00:00
Jiri Denemark
3ed18372a3 libvirt-qemu: Fix enum type declaration 2011-02-14 12:35:39 +01:00
Eric Blake
353b760953 sysinfo: expose new API
The new virConnectGetSysinfo() API allows one to get the system
information associated to a connection host, providing the same
data as a guest that uses <os><smbios mode='host'/></os>, and in
a format that can be pasted into the guest and edited when using
<os><smbios mode='sysinfo'/></os>.

* include/libvirt/libvirt.h.in (virConnectGetSysinfo): Declare.
* src/libvirt_public.syms: Export new symbol.
2011-02-08 19:21:26 -07:00
Jiri Denemark
2169472ab6 qemu: Add shortcut for HMP pass through
Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:

    virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'

which is not a very convenient way of debugging qemu.

This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just

    virsh qemu-monitor-command --hmp DOM "info kvm"

Also the result is converted from

    {"return":"kvm support: enabled\r\n"}

to just plain HMP:

    kvm support: enabled

If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.
2011-02-03 22:20:30 +01:00
Matthias Bolte
b75fab32ec Add documentation for VIR_DOMAIN_MEMORY_PARAM_UNLIMITED
Otherwise apibuild.py complains about it.
2011-01-18 23:14:37 +01:00
Nikunj A. Dadhania
d94a14f89d memtune: Let virsh know the unlimited value for memory tunables
Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.

Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: Justin Clift <jclift@redhat.com>
2011-01-14 17:17:27 -07:00
Eric Blake
2deb32ae02 virterror: avoid API breakage with vmware
Fix glitch in commit cddd2a06 (thankfully post-0.8.6, so no
released version has the glitch).

Document and try to workaround glitch in commit 46e9b0f (in 0.8.0),
which invalidated 6 virErrorNumber values dating as far back as 0.7.1.

My audit did not find any other glitches until pre-0.1.0 days.  I'm
not sure how to add a syntax-check off the top of my head, but
hopefully the explicit numbering will make people think twice about
renumbering in the future.

* include/libvirt/virterror.h (virErrorDomain): Avoid inserting
new values in the middle, and add explicit numbering to help avoid
this in the future.
(virErrorNumber): Add explicit numbering, and document the snafu.
* src/remote/remote_driver.c (remoteIO): Compensate for the snafu.
2010-12-22 09:09:04 -07:00
Jean-Baptiste Rouault
cddd2a0628 Add VMware Workstation and Player driver 2010-12-17 21:19:39 +01:00
Jiri Denemark
ac9dd4a676 Fix host CPU counting on unusual NUMA topologies
The nodeinfo structure includes

    nodes   : the number of NUMA cell, 1 for uniform mem access
    sockets : number of CPU socket per node
    cores   : number of core per socket
    threads : number of threads per core

which does not work well for NUMA topologies where each node does not
consist of integral number of CPU sockets.

We also have VIR_NODEINFO_MAXCPUS macro in public libvirt.h which
computes maximum number of CPUs as (nodes * sockets * cores * threads).

As a result, we can't just change sockets to report total number of
sockets instead of sockets per node. This would probably be the easiest
since I doubt anyone is using the field directly. But because of the
macro, some apps might be using sockets indirectly.

This patch leaves sockets to be the number of CPU sockets per node (and
fixes qemu driver to comply with this) on machines where sockets can be
divided by nodes. If we can't divide sockets by nodes, we behave as if
there was just one NUMA node containing all sockets. Apps interested in
NUMA should consult capabilities XML, which is what they probably do
anyway.

This way, the only case in which apps that care about NUMA may break is
on machines with funky NUMA topology. And there is a chance libvirt
wasn't able to start any guests on those machines anyway (although it
depends on the topology, total number of CPUs and kernel version).
Nothing changes at all for apps that don't care about NUMA.
2010-11-25 10:49:47 +01:00
Osier Yang
347d73f211 virDomainIsUpdated: define the new public API
introduce new public API "virDomainIsUpdated"

* src/conf/domain_conf.h (new member "updated" for "virDomainObj")
* src/libvirt_public.syms
* include/libvirt/libvirt.h.in
2010-11-23 14:22:31 -07:00
Daniel P. Berrange
7c08fcc439 Add a generic internal API for handling any FD based stream
To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback

The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O

* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
  VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
  generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
  src/libvirt_private.syms: Generic reusable FD based streams
2010-11-11 16:02:57 +00:00
Daniel P. Berrange
88a9b382c6 Introduce a virDomainOpenConsole API
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.

* src/libvirt.c, src/libvirt_public.syms,
  include/libvirt/libvirt.h.in, src/driver.h: Define the
  new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
  API entry point
2010-11-11 16:02:41 +00:00
Cole Robinson
96d52fcf43 qemu: Add flag to force a CDROM eject
QEMU allows forcing a CDROM eject even if the guest has locked the device.
Expose this via a new UpdateDevice flag, VIR_DOMAIN_DEVICE_MODIFY_FORCE.

This has been requested for RHEV:

https://bugzilla.redhat.com/show_bug.cgi?id=626305

v2: Change flag name, bool cleanups
2010-11-10 12:31:20 -05:00
Matthias Bolte
e65812d479 xen-proxy: Remove it entirely and use libvirtd instead
Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.
2010-11-08 22:00:35 +01:00
Daniel Veillard
778c0976c0 Add a sysinfo util module and read host info API
Move existing routines about virSysinfoDef to an util module,
add a new entry point virSysinfoRead() to read the host values
with dmidecode

* src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c
  src/util/sysinfo.h: move to a new module, add virSysinfoRead()
* src/Makefile.am: handle the new module build
* src/libvirt_private.syms: new internal symbols
* include/libvirt/virterror.h src/util/virterror.c: defined a new
  error code for that module
* po/POTFILES.in: add new file for translations
2010-11-08 15:14:50 +01:00
Matthias Bolte
916f95b7aa Rename VIR_DOMAIN_SWAP_HARD_LIMIT to VIR_DOMAIN_MEMORY_SWAP_HARD_LIMIT
To get them under the common VIR_DOMAIN_MEMORY_* prefix.
2010-10-20 19:33:11 +02:00
Nikunj A. Dadhania
c1468e3f8f Update comments for the memory tunables macros
* include/libvirt/libvirt.h.in: Update comment with actual description
2010-10-20 11:38:39 +02:00
Daniel P. Berrange
8f680ad3b8 Basic framework for auditing integration
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API

Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled

* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
  on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
  daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
  options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
  API for auditing messages
2010-10-19 17:31:31 +01:00
Eric Blake
ea3f5c6809 vcpu: add new public API
API agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00456.html,
but modified for enum names to be consistent with virDomainDeviceModifyFlags.

* include/libvirt/libvirt.h.in (virDomainVcpuFlags)
(virDomainSetVcpusFlags, virDomainGetVcpusFlags): New
declarations.
* src/libvirt_public.syms: Export new symbols.
2010-10-19 10:00:17 -06:00
Daniel Veillard
0df671513d Fixes for documentation extraction
* include/libvirt/libvirt.h.in: some of the function type description
  were broken so they could not be automatically documented
* src/util/event.c docs/apibuild.py: event.c exports one public API
  so it needs to be scanned too, avoid a few warnings
2010-10-13 13:50:07 +02:00
Matthias Bolte
43c2c61f68 Fix several minor problems introduced by the memtune series
Add proper documentation to the new VIR_DOMAIN_MEMORY_* macros in
libvirt.h.in to placate apibuild.py.

Mark args as unused in for libvirt_virDomain{Get,Set}MemoryParameters
in the Python bindings and add both to the libvirtMethods array.

Update remote_protocol-structs to placate make syntax-check.

Undo unintended modifications in vboxDomainGetInfo.

Update the function table of the VirtualBox and XenAPI drivers.
2010-10-12 21:24:11 +02:00
Nikunj A. Dadhania
bf1b76ffaa Adding structure and defines for virDomainSet/GetMemoryParameters
This patch adds a structure virMemoryParameter, it contains the name of
the
parameter and the type of the parameter along with a union.

dv:
+ rename enums to VIR_DOMAIN_MEMORY_PARAM_*
+ remove some extraneous tabs

v4:
+ Add unsigned int flags to the public api for future extensions

v3:
+ Protoype for virDomainGetMemoryParameters and dummy python binding.

v2:
+ Includes dummy python bindings for the library to build cleanly.
+ Define string constants like "hard_limit", etc.
+ re-order this patch.
2010-10-12 19:26:09 +02:00
Eric Blake
4018a026b2 build: fix VPATH builds
After the recent libvirt-qemu library addition, VPATH builds fail with:

  CC     libvirt_qemu_la-libvirt-qemu.lo
In file included from ../../src/libvirt-qemu.c:29:
../../include/libvirt/libvirt-qemu.h:17:22: error: libvirt.h: No such file or directory
...
  CCLD   libvirt-qmeu.la
/usr/bin/ld: cannot open linker script file libvirt_qemu.syms: No such file or directory

This fixes both issues (there are still some documentation VPATH issues,
but those don't show up with 'make check').

* configure.ac (LIBVIRT_QEMU_SYMBOL_FILE): While libvirt.syms is
generated and lives in $(builddir), libvirt_qemu.syms is static
and lives in $(srcdir).
* include/libvirt/libvirt-qemu.h (includes): Pull in libvirt.h via
the public location, since this is a public header.
2010-07-26 12:06:48 -06:00
Chris Lalancette
21adf03c2d Qemu Monitor API entry point.
Add the library entry point for the new virDomainQemuMonitorCommand()
entry point.  Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.

Changes since v1:
 - Go back to using the virDriver table for qemuDomainMonitorCommand, due to
   linking issues
 - Added versioning information to the libvirt-qemu.so

Changes since v2:
 - None

Changes since v3:
 - Add LGPL header to libvirt-qemu.c
 - Make virLibConnError and virLibDomainError macros instead of function calls

Changes since v4:
 - Move exported symbols to libvirt_qemu.syms

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-07-23 17:30:14 -04:00
Eric Blake
460ca88b98 libvirt: introduce domainCreateWithFlags API
Persistent domain creation needs the same features as transient
domains, but virDomainCreate lacks the flags argument present in
virDomainCreateXML.  virDomainCreateFlags is already claimed as
a public enum, so we have to break convention and expose
virDomainCreateWithFlags.

* include/libvirt/libvirt.h.in (virDomainCreateWithFlags): Add.
* src/driver.h (virDrvDomainCreateWithFlags): Internal API.
* src/libvirt.c (virDomainCreateWithFlags): Glue public API to
driver API.
* src/libvirt_public.syms (LIBVIRT_0.8.2): Expose public API.
* src/esx/esx_driver.c (esxDriver): Add stub for driver.
* src/lxc/lxc_driver.c (lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/test/test_driver.c (testDriver): Likewise.
* src/uml/uml_driver.c (umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (Driver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
2010-06-15 07:32:41 -06:00
Eric Blake
fb8552f83a maint: simplify some ignore files
* .hgignore: Delete, no longer used.
* examples/python/.gitignore: Delete, covered globally.
* include/.gitignore: Likewise.
* python/tests/.gitignore: Likewise.
* docs/schemas/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.
* tests/sexpr2xmldata/.gitignore: Likewise.
* tests/confdata/.gitignore: Likewise.
* tests/xencapsdata/.gitignore: Likewise.
* tests/xmconfigdata/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.
2010-06-15 07:31:10 -06:00
Eric Blake
2502ebb30a virDomainCreateXML: support new flag
* include/libvirt/libvirt.h.in (virDomainCreateFlags): Add
VIR_DOMAIN_START_PAUSED.
* src/libvirt.c (virDomainCreateXML): Update documentation.
* src/lxc/lxc_driver.c (lxcDomainCreateAndStart): Reject new flag
as unimplemented.
* src/opennebula/one_driver.c (oneDomainCreateAndStart):
Likewise.
* src/openvz/openvz_driver.c (openvzDomainCreateXML): Likewise.
* src/phyp/phyp_driver.c (phypDomainCreateAndStart): Likewise.
* src/qemu/qemu_driver.c (qemudDomainCreate): Likewise.
* src/test/test_driver.c (testDomainCreateXML): Likewise.
* src/uml/uml_driver.c (umlDomainCreate): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainCreateXML): Likewise.
* src/xen/xend_internal.c (xenDaemonCreateXML): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainCreateXML): Likewise.
2010-06-08 15:35:55 -06:00
Chris Lalancette
60d05f7321 Allow nwfilter functions to be compiled with C++
Unfortunately the NWFilter functions were outside of the
"extern C { ... }" declaration in include/libvirt/libvirt.h.in,
which means that they couldn't be properly used with C++.  Move
them inside of the braces, which should fix the problem.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-05-25 09:29:33 -04:00
Jim Meyering
d54bad5d0e note a typo: VIR_MIGRATE_TUNNELLED should be VIR_MIGRATE_TUNNELED,
so that searches for properly spelled "TUNNELED" turn up
the surprising spelling of this public symbol.
* include/libvirt/libvirt.h.in: Add a comment.
2010-05-19 08:08:52 +02:00
Matthias Bolte
32d9e0707c Add VIR_STORAGE_POOL_INACCESSIBLE to denote inaccessible storage pools
This status will be used by the ESX storage driver.

For example a running NFS pool is inaccessible when the NFS server is
currently unreachable.
2010-05-18 01:34:34 +02:00
Kenneth Nagin
b0a3f8b6c5 qemu: live migration with non-shared storage for kvm
Support for live migration between hosts that do not share storage was
added to qemu-kvm release 0.12.1.
It supports two flags:
-b migration without shared storage with full disk copy
-i migration without shared storage with incremental copy (same base image
shared between source and destination).

I tested the live migration without shared storage (both flags) for native
and p2p with and without tunnelling.  I also verified that the fix doesn't
affect normal migration with shared storage.
2010-05-04 16:03:36 -06:00
Daniel P. Berrange
34dcbbb470 Add support for another explicit IO error event
This introduces a new event type

   VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON

This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.

Thus there is a new callback definition for this event type

typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
                                                           virDomainPtr dom,
                                                           const char *srcPath,
                                                           const char *devAlias,
                                                           int action,
                                                           const char *reason,
                                                           void *opaque);

This is currently wired up to the QEMU block IO error events

* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
  IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
  from QEMU monitor
2010-04-30 15:52:59 +01:00
Daniel P. Berrange
24aad9f7be Add virDomainGetBlockInfo API to query disk sizing
Some applications need to be able to query a guest's disk info,
even for paths not managed by the storage pool APIs. This adds
a very simple API to get this information, modelled on the
virStorageVolGetInfo API, but with an extra field 'physical'.
Normally 'physical' and 'allocation' will be identical, but
in the case of a qcow2-like file stored inside a block device
'physical' will give the block device size, while 'allocation'
will give the qcow2 image size

* include/libvirt/libvirt.h.in: Define virDomainGetBlockInfo
2010-04-29 17:20:24 +01:00
Chris Lalancette
2f992d4be4 Snapshot API framework.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-04-05 10:24:34 -04:00
Daniel Veillard
15c647a91e Add managed save API entry points
virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.

* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
  adds the new entry points virDomainManagedSave(),
  virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
  src/opennebula/one_driver.c  src/openvz/openvz_driver.c
  src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
  src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
  src/xen/xen_driver.c: add corresponding new internal drivers entry
  points
2010-04-04 11:07:48 +02:00
Daniel P. Berrange
cd2404a3c3 Keep track of guest paused state after disk IO / watchdog events
When a watchdog/IO error occurs, one of the possible actions that
QEMU might take is to pause the guest. In this scenario libvirt
needs to update its internal state for the VM, and emit a
lifecycle event:

  VIR_DOMAIN_EVENT_SUSPENDED

with a detail being one of:

  VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
  VIR_DOMAIN_EVENT_SUSPENDED_WATCHDOG

To future proof against possible QEMU support for multiple monitor
consoles, this patch also hooks into the 'STOPPED' event in QEMU
and emits a generic VIR_DOMAIN_EVENT_SUSPENDED_PAUSED event

* include/libvirt/libvirt.h.in: Add VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
* src/qemu/qemu_driver.c: Update VM state to paused when IO error
  or watchdog events occurrs
* src/qemu/qemu_monitor_json.c: Fix typo in disk IO event name
2010-04-01 12:35:46 +01:00
Daniel Veillard
5bbde877e7 Fix a merge error leftover 2010-03-29 18:27:12 +02:00
Daniel Veillard
bf7354072f Add an error module and message for the hooks subsystem
* include/libvirt/virterror.h: add VIR_FROM_HOOK and VIR_ERR_HOOK_SCRIPT_FAILED
* src/util/virterror.c: associated strings
2010-03-29 18:21:04 +02:00
Jiri Denemark
e455b221be Introduce UPDATE_CPU flag for virDomainGetXMLDesc
This flag is used in migration prepare step to send updated XML
definition of a guest.

Also ``virsh dumpxml --update-cpu [--inactive] guest'' command can be
used to see the updated CPU requirements.
2010-03-26 23:05:23 +01:00
Stefan Berger
46e9b0fb4e Implementation of the public API
This patch adds the implementation of the public API for the network
filtering (ACL) extensions to libvirt.c .

Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
2010-03-26 18:01:15 +00:00
Stefan Berger
c71a2100b1 Add public API
This patch adds extensions to libvirt's public API necessary for
controlling the new functionality from remote for example.

Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
2010-03-26 18:01:15 +00:00
Daniel P. Berrange
46a2ea3689 Introduce a new virDomainUpdateDeviceFlags public API
The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.

* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
  driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
  stubs for new driver entry point
2010-03-26 14:13:28 +00:00
Daniel P. Berrange
987e31edc9 Add domain events for graphics network clients
This introduces a new event type

   VIR_DOMAIN_EVENT_ID_GRAPHICS

The same event can be emitted in 3 scenarios

  typedef enum {
      VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
      VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
      VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
  } virDomainEventGraphicsPhase;

Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop

This event comes with *a lot* of potential information

 - IP address, port & address family of client
 - IP address, port & address family of server
 - Authentication scheme (arbitrary string)
 - Authenticated subject identity. A subject may have
   multiple identities with some authentication schemes.
   For example, vencrypt+sasl results in a x509dname
   and saslUsername identities.

This results in a very complicated callback :-(

   typedef enum {
      VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
      VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
   } virDomainEventGraphicsAddressType;

   struct _virDomainEventGraphicsAddress {
       int family;
       const char *node;
       const char *service;
   };
   typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
   typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;

   struct _virDomainEventGraphicsSubject {
      int nidentity;
      struct {
          const char *type;
          const char *name;
      } *identities;
   };
   typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
   typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;

   typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
                                                         virDomainPtr dom,
                                                         int phase,
                                                         virDomainEventGraphicsAddressPtr local,
                                                         virDomainEventGraphicsAddressPtr remote,
                                                         const char *authScheme,
                                                         virDomainEventGraphicsSubjectPtr subject,
                                                         void *opaque);

The wire protocol is similarly complex

   struct remote_domain_event_graphics_address {
     int family;
     remote_nonnull_string node;
     remote_nonnull_string service;
   };

   const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;

   struct remote_domain_event_graphics_identity {
     remote_nonnull_string type;
     remote_nonnull_string name;
   };

   struct remote_domain_event_graphics_msg {
     remote_nonnull_domain dom;
     int phase;
     remote_domain_event_graphics_address local;
     remote_domain_event_graphics_address remote;
     remote_nonnull_string authScheme;
     remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
   };

This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.

* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
  graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
  VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor
2010-03-26 13:53:20 +00:00
Daniel P. Berrange
71d793faaf Add support for an explicit IO error event
This introduces a new event type

   VIR_DOMAIN_EVENT_ID_IO_ERROR

This event includes the action that is about to be taken
as a result of the watchdog triggering

  typedef enum {
     VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
     VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
     VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
  } virDomainEventIOErrorAction;

In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)

Thus there is a new callback definition for this event type

typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
                                                     virDomainPtr dom,
                                                     const char *srcPath,
                                                     const char *devAlias,
                                                     int action,
                                                     void *opaque);

This is currently wired up to the QEMU block IO error events

* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
  IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
  from QEMU monitor
2010-03-26 13:53:11 +00:00
Daniel P. Berrange
c5728cd618 Add support for an explicit watchdog event
This introduces a new event type

   VIR_DOMAIN_EVENT_ID_WATCHDOG

This event includes the action that is about to be taken
as a result of the watchdog triggering

 typedef enum {
     VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
     VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
     VIR_DOMAIN_EVENT_WATCHDOG_RESET,
     VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
     VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
     VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
 } virDomainEventWatchdogAction;

Thus there is a new callback definition for this event type

 typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
                                                       virDomainPtr dom,
                                                       int action,
                                                       void *opaque);

* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
  watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
  from QEMU monitor
2010-03-26 13:53:01 +00:00
Daniel P. Berrange
32e6ac9c26 Add support for an explicit RTC change event
This introduces a new event type

   VIR_DOMAIN_EVENT_ID_RTC_CHANGE

This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type

 typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
                                                        virDomainPtr dom,
                                                        long long utcoffset,
                                                        void *opaque);

If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.

* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
  RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
  from QEMU monitor
2010-03-26 13:52:50 +00:00
Daniel P. Berrange
8613273458 Add support for an explicit guest reboot event
The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.

This introduces a new event type

    VIR_DOMAIN_EVENT_ID_REBOOT

It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.

* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
  reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  reboot events
2010-03-26 13:52:43 +00:00
Daniel P. Berrange
4445723811 Introduce a new public API for domain events
The current API for domain events has a number of problems

 - Only allows for domain lifecycle change events
 - Does not allow the same callback to be registered multiple times
 - Does not allow filtering of events to a specific domain

This introduces a new more general purpose domain events API

  typedef enum {
     VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0,       /* virConnectDomainEventCallback */
      ...more events later..
  }

  int virConnectDomainEventRegisterAny(virConnectPtr conn,
                                       virDomainPtr dom, /* Optional, to filter */
                                       int eventID,
                                       virConnectDomainEventGenericCallback cb,
                                       void *opaque,
                                       virFreeCallback freecb);

  int virConnectDomainEventDeregisterAny(virConnectPtr conn,
                                         int callbackID);

Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature

eg

  int myDomainEventCallback(virConnectPtr conn,
                            virDomainPtr dom,
                            int event,
                            int detail,
                            void *opaque)
  {
    ...
  }

  virConnectDomainEventRegisterAny(conn, NULL,
                                   VIR_DOMAIN_EVENT_ID_LIFECYCLE,
                                   VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
                                   NULL, NULL);

The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature

* include/libvirt/libvirt.h.in: Define new APIs for registering
  domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
  src/xenapi/xenapi_driver.c: Stub out new API entries
2010-03-26 13:52:03 +00:00
Matthias Bolte
190aaa2627 Fix export of virConnectAuthPtrDefault for MinGW builds
Use the __declspec(dllexport/dllimport) stuff to export the symbol,
otherwise accessing virConnectAuthPtrDefault triggers a segfault.
2010-03-23 02:07:38 +01:00
Jiri Denemark
68f63673da Public virDomainMigrateSetMaxDowntime API 2010-03-19 22:33:09 +01:00
David Allan
e10dc8666e Add public API for volume wiping 2010-03-19 14:31:48 -04:00
Sharadha Prabhakar
eb9945d9ae xenapi: Initial commit of the new driver 2010-03-14 19:30:00 +01:00
Eric Blake
36d8e7d8d7 build: consistently indent preprocessor directives
* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done
2010-03-09 19:22:28 +01:00
Daniel P. Berrange
4fee63fe1c Introduce public API for cancelling async domain jobs
The new virDomainAbortJob() method provides a way for a second
thread to abort an ongoing job run by another thread. This
extends to any API with  which the virDomainGetJobInfo() API
is intended to work. Cancellation is not guarenteed, rather best
effort on part of the hypervisor and not required to be implmented.

* include/libvirt/libvirt.h.in: Define virDomainAbortJob()
2010-03-02 16:23:31 +00:00
Daniel P. Berrange
7d575e09e2 Introduce public API for domain async job handling
Introduce a new public API that provides a way to get progress
info on currently running jobs on a virDomainpPtr. APIs that
are initially within scope of this idea are

 virDomainMigrate
 virDomainMigrateToURI
 virDomainSave
 virDomainRestore
 virDomainCoreDump

These all take a potentially long time and benefit from monitoring.
The virDomainJobInfo struct allows for various pieces of information
to be reported

 - Percentage completion
 - Time
 - Overall data
 - Guest memory data
 - Guest disk/file data

* include/libvirt/libvirt.h.in: Add virDomainGetJobInfo
* python/generator.py, python/libvirt-override-api.xml,
  python/libvirt-override.c: Override for virDomainGetJobInfo API
* python/typewrappers.c, python/typewrappers.h: Introduce wrapper
  for unsigned long long type
2010-03-02 16:22:30 +00:00
Jiri Denemark
605542c330 virConnectBaselineCPU public API 2010-02-12 14:21:58 +01:00
Jim Fehlig
314190a0ad Public API
Definition of public API for virDomain{Attach,Detach}DeviceFlags.

V2: Adjust libvrt_public.syms to anticipated 0.7.7 release.
2010-02-08 10:48:16 -07:00
Adam Litke
3a70131312 Add new API virDomainMemoryStats to header and drivers
Set up the types for the domainMemoryStats function and insert it into the
virDriver structure definition.  Because of static initializers, update
every driver and set the new field to NULL.

* include/libvirt/libvirt.h.in: new API
* src/driver.h src/*/*_driver.c src/vbox/vbox_tmpl.c: add the new
  entry to the driver structure
* python/generator.py: fix compiler errors, the actual python binding is
  implemented later
2009-12-20 13:28:42 +01:00
Jiri Denemark
a44dc266d9 New public API definition virConnectCompareCPU()
* include/libvirt/libvirt.h.in: add it in the public API as
  well as the new flags
* src/libvirt_public.syms: export it
2009-12-18 14:51:39 +01:00
Jiri Denemark
6695818c03 XML parsing/formating code for CPU flags
* include/libvirt/virterror.h src/util/virterror.c: add new domain
  VIR_FROM_CPU for errors
* src/conf/cpu_conf.c src/conf/cpu_conf.h: new parsing module
* src/Makefile.am proxy/Makefile.am: include new files
* src/conf/capabilities.[ch] src/conf/domain_conf.[ch]: reference
  new code
* src/libvirt_private.syms: private export of new entry points
2009-12-18 14:44:55 +01:00
Paolo Bonzini
1fb7af40cd add --live support to "virsh dump"
This is trivial for QEMU since you just have to not stop the vm before
starting the dump.  And for Xen, you just pass the flag down to xend.

* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): Add VIR_DUMP_LIVE.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Support live dumping.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support live dumping.
* tools/virsh.c (opts_dump): Add --live. (cmdDump): Map it to VIR_DUMP_LIVE.
2009-12-14 12:10:38 +01:00
Paolo Bonzini
b927aed8a3 add --crash support to "virsh dump"
This patch adds the --crash option (already present in "xm dump-core")
to "virsh dump".  virDomainCoreDump already has a flags argument, so
the API/ABI is untouched.

* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): New flag for
  CoreDump
* src/test/test_driver.c (testDomainCoreDump): Do not crash
  after dump unless VIR_DUMP_CRASH is given.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Shutdown the domain
  instead of restarting it if --crash is passed.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support --crash.
* tools/virsh.c (opts_dump): Add --crash.
  (cmdDump): Map it to flags for virDomainCoreDump and pass them.
2009-12-14 11:59:27 +01:00
Paolo Bonzini
edc9e78b48 add virsh --suspend arg to migrate command
This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.

* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.
2009-12-11 10:00:44 +01:00
Cole Robinson
ce4c0bf5a2 Add virConnectGetLibvirtVersion API
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
2009-11-12 10:53:26 -05:00
Maximilian Wilhelm
632be33689 Implement finer grained migration control for Xen
* src/xen/xen_driver.c: Add support for VIR_MIGRATE_PERSIST_DEST flag
* src/xen/xend_internal.c: Add support for VIR_MIGRATE_UNDEFINE_SOURCE flag
* include/libvirt/virterror.h, src/util/virterror.c: Add new errorcode
  VIR_ERR_MIGRATE_PERSIST_FAILED
2009-11-12 16:04:43 +01:00
Daniel P. Berrange
c04498b305 New APIs for checking some object properties
Introduce a number of new APIs to  expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.

 * virDomainIsActive: Checking virDomainGetID is not reliable
   since it is not possible to distinguish between error condition
   and inactive domain for ID of -1.
 * virDomainIsPersistent: Check whether a persistent config exists
   for the domain

 * virNetworkIsActive: Check whether the network is active
 * virNetworkIsPersistent: Check whether a persistent config exists
   for the network

 * virStoragePoolIsActive: Check whether the storage pool is active
 * virStoragePoolIsPersistent: Check whether a persistent config exists
   for the storage pool

 * virInterfaceIsActive: Check whether the host interface is active

 * virConnectIsSecure: whether the communication channel to the
   hypervisor is secure
 * virConnectIsEncrypted: whether any network based commnunication
   channels are encrypted

NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.

 * include/libvirt/libvirt.h.in: Define public API
 * src/driver.h: Define internal driver API
 * src/libvirt.c: Implement public API entry point
 * src/libvirt_public.syms: Export API symbols
 * src/esx/esx_driver.c, src/lxc/lxc_driver.c,
   src/interface/netcf_driver.c, src/network/bridge_driver.c,
   src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
   src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
   src/remote/remote_driver.c, src/test/test_driver.c,
   src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
   src/xen/xen_driver.c: Stub out driver tables
2009-11-10 17:00:26 +00:00
Daniel P. Berrange
9b6efcfef1 Allow timeouts waiting for QEMU job lock
Some monitor commands may take a very long time to complete. It is
not desirable to block other incoming API calls forever. With this
change, if an existing API call is holding the job lock, additional
API calls will not wait forever. They will time out after a short
period of time, allowing application to retry later.

* include/libvirt/virterror.h, src/util/virterror.c: Add new
  VIR_ERR_OPERATION_TIMEOUT error code
* src/qemu/qemu_driver.c: Change to a timed condition variable
  wait for acquiring the monitor job lock
2009-11-10 13:27:18 +00:00
Matthew Booth
3023ec5ee7 Ensure guestfwd address is IPv4 and various cleanups
* include/libvirt/virterror.h src/util/virterror.c: add a new error
  VIR_ERR_CONFIG_UNSUPPORTED for valid but unsupported configuration options
* src/conf/domain_conf.c: Throw an error if guestfwd address isn't IPv4
  and cleanup a number of parsing return error values.
2009-11-05 16:04:34 +01:00
Laine Stump
753c6c9c75 Support reporting live interface IP/netmask
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to
virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the
live interface info will be returned in the XML (in particular, the IP
address(es) and netmask(s) will be retrieved by querying the interface
directly, rather than  reporting what's in the config file). The
backend of this is in netcf's ncf_if_xml_state() function.

* configure.in libvirt.spec.in: requires netcf >= 0.1.3
* include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE
* src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c:
  update the parsing and backend routines accordingly
* tools/virsh.c: change interface edit to inactive definition and
  adds the inactive flag for interface dump
2009-11-03 21:04:56 +01:00
Chris Lalancette
2d8d9b100b Finer grained migration control
Normally, when you migrate a domain from host A to host B,
the domain on host A remains defined but shutoff and the domain
on host B remains running but is a "transient".  Add a new
flag to virDomainMigrate() to allow the original domain to be
undefined on source host A, and a new flag to virDomainMigrate() to
allow the new domain to be persisted on the destination host B.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-10-14 11:35:51 +02:00
Daniel P. Berrange
fae0da5c13 Support a new peer-to-peer migration mode & public API
Introduces several new public API options for migration

 - VIR_MIGRATE_PEER2PEER: With this flag the client only
   invokes the virDomainMigratePerform method, expecting
   the source host driver to do whatever is required to
   complete the entire migration process.
 - VIR_MIGRATE_TUNNELLED: With this flag the actual data
   for migration will be tunnelled over the libvirtd RPC
   channel. This requires that VIR_MIGRATE_PEER2PEER is
   also set.
 - virDomainMigrateToURI: This is variant of the existing
   virDomainMigrate method which does not require any
   virConnectPtr for the destination host. Given suitable
   driver support, this allows for all the same modes as
   virDomainMigrate()

The URI for VIR_MIGRATE_PEER2PEER must be a valid libvirt
URI. For non-p2p migration a hypervisor specific migration
URI is used.

virDomainMigrateToURI without a PEER2PEER flag is only
support for Xen currently, and it involves XenD talking
directly to XenD, no libvirtd involved at all.

* include/libvirt/libvirt.h.in: Add VIR_MIGRATE_PEER2PEER
  flag for migration
* src/libvirt_internal.h: Add feature flags for peer to
  peer migration (VIR_FEATURE_MIGRATE_P2P) and direct
  migration (VIR_MIGRATE_PEER2PEER mode)
* src/libvirt.c: Implement support for VIR_MIGRATE_PEER2PEER
  and virDomainMigrateToURI APIs.
* src/xen/xen_driver.c: Advertise support for DIRECT migration
* src/xen/xend_internal.c: Add TODO item for p2p migration
* src/libvirt_public.syms: Export virDomainMigrateToURI
  method
* src/qemu/qemu_driver.c: Add support for PEER2PEER and
  migration, and adapt TUNNELLED migration.
* tools/virsh.c: Add --p2p and --direct args and use the
  new virDomainMigrateToURI method where possible.
2009-10-09 12:35:07 +01:00
Chris Lalancette
6e16575a37 Tunnelled migration.
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend.  Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-10-02 11:43:26 +02:00
Daniel P. Berrange
182eba1bc6 Add public API definition for data stream handling
* include/libvirt/libvirt.h.in: Public API contract for
  virStreamPtr object
* src/libvirt_public.syms: Export data stream APIs
* src/libvirt_private.syms: Export internal helper APIs
* src/libvirt.c: Data stream API driver dispatch
* src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr
  object
* src/driver.h: Define internal driver API for streams
* .x-sc_avoid_write: Ignore src/libvirt.c because it trips
  up on comments including write()
* python/Makefile.am: Add libvirt-override-virStream.py
* python/generator.py: Add rules for virStreamPtr class
* python/typewrappers.h, python/typewrappers.c: Wrapper
  for virStreamPtr
* docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate
  with new APIs
2009-09-29 15:48:52 +01:00
Daniel P. Berrange
12c542a421 Ignore auto-generated header file
* include/libvirt/.gitignore: Ignore libvirt.h
2009-09-22 16:12:51 +01:00
Daniel P. Berrange
b1e32305bd Remove auto-generated header file from repo
* include/libvirt/libvirt.h: Delete auto-generated file
2009-09-21 15:44:06 +01:00
Daniel Veillard
c4f6e80671 Release of libvirt 0.7.1
* configure.in docs/news.html.in libvirt.spec.in src/libvirt_public.syms:
  updates to new release
* NEWS docs/devhelp/libvirt-libvirt.html docs/html/libvirt-libvirt.html
  docs/libvirt-api.xml docs/libvirt-refs.xml docs/news.html
  include/libvirt/libvirt.h: regenerated
2009-09-15 14:24:51 +02:00
Daniel P. Berrange
a2a30038cf Add usage type/id as a public API property of virSecret
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in: Add
  virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage
* python/generator.py: Mark virSecretGetUsageType, virSecretGetUsageID
  as not throwing exceptions
* qemud/remote.c: Implement dispatch for virLookupSecretByUsage
* qemud/remote_protocol.x: Add usage type & ID as attributes of
  remote_nonnull_secret. Add RPC calls for new public APIs
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
  qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
  qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.c, src/datatypes.h: Add usageType and usageID as
  properties of virSecretPtr
* src/driver.h: Add virLookupSecretByUsage driver entry point
* src/libvirt.c: Implement virSecretGetUsageType, virSecretGetUsageID
  and virLookupSecretByUsage
* src/libvirt_public.syms: Export virSecretGetUsageType, virSecretGetUsageID
  and virLookupSecretByUsage
* src/remote_internal.c: Implement virLookupSecretByUsage entry
* src/secret_conf.c, src/secret_conf.h: Remove the
  virSecretUsageType enum, now in public API. Make volume
  path mandatory when parsing XML
* src/secret_driver.c: Enforce usage uniqueness when defining secrets.
  Implement virSecretLookupByUsage api method
* src/virsh.c: Include usage for secret-list command
2009-09-14 17:49:33 +01:00
Daniel P. Berrange
47e7a258db Fix UUID handling in secrets/storage encryption APIs
Convert all the secret/storage encryption APIs / wire format to
handle UUIDs in raw format instead of non-canonical printable
format. Guarentees data format correctness.

* docs/schemas/storageencryption.rng: Make UUID mandatory for a secret
  and validate fully
* docs/schemas/secret.rng: Fully validate UUID
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in, Add
  virSecretLookupByUUID and virSecretGetUUID. Make
  virSecretGetUUIDString follow normal API design pattern
* python/generator.py: Skip generation of virSecretGetUUID,
  virSecretGetUUIDString and virSecretLookupByUUID
* python/libvir.c, python/libvirt-python-api.xml: Manual impl
  of virSecretGetUUID,virSecretGetUUIDString and virSecretLookupByUUID
* qemud/remote.c: s/virSecretLookupByUUIDString/virSecretLookupByUUID/
  Fix get_nonnull_secret/make_nonnull_secret to use unsigned char
* qemud/remote_protocol.x: Fix remote_nonnull_secret to use a
  remote_uuid instead of remote_nonnull_string for UUID field.
  Rename REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING to
  REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING and make it take an
  remote_uuid  value
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
  qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
  qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.h, src/datatypes.c: Store UUID in raw format instead
  of printable. Change virGetSecret to use raw format UUID
* src/driver.h: Rename virDrvSecretLookupByUUIDString to
  virDrvSecretLookupByUUID and use raw format UUID
* src/libvirt.c: Add virSecretLookupByUUID and virSecretGetUUID
  and re-implement virSecretLookupByUUIDString and
  virSecretGetUUIDString in terms of those
* src/libvirt_public.syms: Add virSecretLookupByUUID and
  virSecretGetUUID
* src/remote_internal.c: Rename remoteSecretLookupByUUIDString
  to remoteSecretLookupByUUID. Fix typo in args for
  remoteSecretDefineXML impl. Use raw UUID format for
  get_nonnull_secret and make_nonnull_secret
* src/storage_encryption_conf.c, src/storage_encryption_conf.h:
  Storage UUID in raw format, and require it to be present in
  XML. Use UUID parser to validate.
* secret_conf.h, secret_conf.c: Generate a UUID if none is provided.
  Storage UUID in raw format.
* src/secret_driver.c: Adjust to deal with raw UUIDs. Save secrets
  in a filed with printable UUID, instead of base64 UUID.
* src/virsh.c: Adjust for changed public API contract of
  virSecretGetUUIDString.
* src/storage_Backend.c: DOn't undefine secret we just generated
  upon successful volume creation. Fix to handle raw UUIDs. Generate
  a non-clashing UUID
* src/qemu_driver.c: Change to use lookupByUUID instead of
  lookupByUUIDString
2009-09-14 17:48:29 +01:00
Miloslav Trmač
03d338608d Local file implementation of secret driver API
This implementation stores the secrets in an unencrypted text file,
for simplicity in implementation and debugging.

(Symmetric encryption, e.g. using gpgme, will not be difficult to add.
Because the TLS private key used by libvirtd is stored unencrypted,
encrypting the secrets file does not currently provide much additional
security.)

* include/libvirt/virterror.h, src/virterror.c (VIR_ERR_NO_SECRET): New
  error number.
* po/POTFILES.in, src/Makefile.am: Add secret_driver.
* bootstrap: Use gnulib's base64 module.
* src/secret_driver.c, src.secret_driver.h, src/libvirt_private.syms:
  Add local secret driver.
* qemud/qemud.c (qemudInitialize): Use the local secret driver.
2009-09-11 14:54:46 +01:00
Miloslav Trmač
b35f0131e6 Secret manipulation public API implementation
* include/libvirt/virterror.h, src/virterror.c: Add VIR_ERR_INVALID_SECRET
  and VIR_FROM_SECRET
* src/libvirt.c: Define stubs for every new public API
2009-09-01 17:39:07 +01:00
Miloslav Trmač
eb42e0ab5c Secret manipulation internal API
* include/libvirt/virterror.h, src/virterror.c: Add VIR_WAR_NO_SECRET
* src/libvirt_private.syms, src/datatypes.h, src/datatypes.c: Type
  virSecret struct definition and helper APIs
* src/driver.h: Sub-driver API definitions for secrets
* src/libvirt.c: Define new sub-driver for secrets
2009-09-01 17:38:59 +01:00
Miloslav Trmač
6acc17af8c Secret manipulation public API
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.

* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
  schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
  describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
  API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
  files list
2009-09-01 17:38:52 +01:00
Daniel Veillard
22a5ebe44b Release of libvirt-0.7.0
* configure.in NEWS docs/* libvirt.spec.in include/libvirt/libvirt.h:
  Release of 0.7.0
* po/*.po*: updated and regenerated the localization pool
2009-08-05 16:00:41 +02:00
Eduardo Otubo
a7a82f9889 First version of the Power Hypervisor driver
Features supported:
- Connects to HMC/VIOS or IVM systems.
- Life cycle commands (resume and shutdown).
- dumpxml
- 'list' and 'list --all'

What is being implemented:
- better and centralized control for UUID
- definexml
- CPU management commands

* src/domain_conf.c src/domain_conf.h: first version of the driver
* configure.in src/Makefile.am include/libvirt/virterror.h
  src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
  in the general framework
2009-07-24 16:17:06 +02:00
Matthias Bolte
e2aeee6811 First version of the driver for VMWare ESX
* src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client
  to talk to the VI services on ESX nodes.
* configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h
  src/libvirt.c src/virterror.c: glue in the new driver
2009-07-23 22:25:34 +02:00
Nguyen Anh Quynh
e4c48e02b4 Add support for physical memory access for QEmu
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in: adds the new
  flag VIR_MEMORY_PHYSICAL for virDomainMemoryPeek
* src/libvirt.c: update the front-end checking
* src/qemu_driver.c: extend the QEmu driver
2009-07-22 16:29:38 +02:00
Laine Stump
6eeca586d4 Add an error code for conflicting mac addresses
* include/libvirt/virterror.h src/virterror.c: if a driver's
  virInterfaceLookupByMACString() function finds more than one interface
  with the desired MAC Address, this new error is raised.
2009-07-21 15:13:32 +02:00
Laine Stump
043c954e9f Public API for new virInterface functions
* include/libvirt/libvirt.h[.in]: adds signatures for the new exported
  functions virConnectNumOfDefinedInterfaces and
  virConnectListDefinedInterfaces
* src/libvirt_public.syms: export the new symbols
2009-07-16 17:49:50 +02:00
Jim Meyering
fb98f4b10d remove all .cvsignore files 2009-07-08 16:17:51 +02:00
Daniel Veillard
c759ae5509 Release of libvirt-0.6.5
* configure.in libvirt.spec.in NEWS docs/* po/*: release of
  libvirt-0.6.5
* .gitignore: adding cscope files
Daniel
2009-07-03 14:32:17 +00:00
Daniel Veillard
66220e3e61 release of libvirt-0.6.4
* configure.in libvirt.spec.in NEWS docs/* po/*: release of
  libvirt-0.6.4
* src/libvirt.c src/virterror.c: some comments cleanups
Daniel
2009-05-29 16:51:15 +00:00
Daniel P. Berrange
8a1a2ac558 Fix Win32 portability problems with 'inteface' symbol clash 2009-05-29 14:29:22 +00:00
Daniel Veillard
b811851b8d Include the OpenNebula driver
* src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
  the OpenNebula driver
* configure.in include/libvirt/virterror.h qemud/Makefile.am
  qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
  src/libvirt.c src/virterror.c: integration of the OpenNebula
  driver in the libvirt infrastructure
* AUTHORS: add Abel Miguez Rodriguez
daniel
2009-05-25 11:56:00 +00:00
Daniel P. Berrange
4d5383fd36 public API for domain XML conversions 2009-05-21 13:46:35 +00:00
Daniel Veillard
73bc011483 Add the Interface config APIs
* configure.in include/libvirt/libvirt.h[.in]
  include/libvirt/virterror.h qemud/remote.c
  qemud/remote_dispatch_args.h qemud/remote_dispatch_prototypes.h
  qemud/remote_dispatch_ret.h qemud/remote_dispatch_table.h
  qemud/remote_protocol.[chx] src/Makefile.am src/datatypes.c
  src/datatypes.h src/driver.h src/libvirt.c src/remote_internal.c
  src/virterror.c src/libvirt_private.syms src/libvirt_public.syms:
  Add the Interface config APIs and remote stubs for those, patch
  by Laine Stump
* AUTHORS: add Laine
daniel
2009-05-20 14:26:49 +00:00
Cole Robinson
5b31c7d08a Add public API stubs for virStorageVolCreateXMLFrom
Also checkin regenerated docs due to API change.
2009-05-12 20:10:50 +00:00
Daniel P. Berrange
7022759b7e Add new VIR_ERR_OPERATION_INVALID error code & use it in Xen & QEMU drivers 2009-05-08 09:58:46 +00:00
Daniel Veillard
9cae1d5ed6 release of 0.6.3
* NEWS configure.in libvirt.spec.in docs/*: release of 0.6.3
* po/*: regenerated
* src/libvirt.c src/virterror.c: fixed some function comments
Daniel
2009-04-24 14:04:54 +00:00
Daniel P. Berrange
62aa1b56d6 Add virNodeDeviceCreateXML / virNodeDeviceDestroy boilerplate public API and remote protocol impl 2009-04-24 13:11:23 +00:00
Daniel Veillard
10d1650843 integration of the VirtualBox support
* configure.in include/libvirt/virterror.h src/Makefile.am
  src/domain_conf.[ch] src/driver.h src/virterror.c src/vbox/README
  src/vbox/vbox_CAPI_v2_2.h src/vbox/vbox_V2_2.c
  src/vbox/vbox_XPCOMCGlue.[ch] src/vbox/vbox_driver.[ch]
  src/vbox/vbox_tmpl.c: integration of the VirtualBox support
  patches by Pritesh Kothari
Daniel
2009-04-17 16:09:07 +00:00
Daniel Veillard
8536e697b6 release of 0.6.2
* configure.in libvirt.spec.in NEWS docs/*: release of 0.6.2
* po/*: Gujarati and Polish updates, rebuild
* AUTHORS: add one missing
Daniel
2009-04-03 15:25:38 +00:00
Daniel Veillard
e43d1ae0c6 * NEWS configure.in libvirt.spec.in doc/* include/libvirt/libvirt.h:
release of 0.6.1
* po/*: rebuilt
* AUTHORS: updated to list new contributors
Daniel
2009-03-04 13:17:44 +00:00
Daniel P. Berrange
8bd1604cb7 Core internal driver stub for sVirt support (Jams Morris & Dan Walsh) 2009-03-03 09:44:41 +00:00
Daniel P. Berrange
0b7860ecdd Public API for sVirt support (James Morris & Dan Walsh) 2009-03-03 09:09:00 +00:00
Daniel Veillard
737af2ea04 Adds the APIs for virNodeDeviceDettach , ReAttach and Reset
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
  src/driver.h src/libvirt.c src/libvirt_public.syms
  src/lxc_driver.c src/openvz_driver.c src/qemu_driver.c
  src/test.c src/uml_driver.c: add the public APIs for
  virNodeDeviceDettach virNodeDeviceReAttach and virNodeDeviceReset
  and extends the driver structure accordingly.
Daniel
2009-03-02 16:25:13 +00:00
John Levon
fa7f51b813 introduce virSaveLastError(), virFreeError() 2009-02-09 14:16:23 +00:00
Daniel Veillard
4a5dfb847b Release of 0.6.0
* configure.in docs/* NEWS: release of 0.6.0
* po/*: regenerated and updated brazilian and polish localizations
daniel
2009-01-31 11:46:29 +00:00
Daniel P. Berrange
a776fad370 Add public APIs for ref counting on public objects 2009-01-20 12:14:03 +00:00
Daniel Veillard
a2232a5cc2 release of 0.5.1
* src/libvirt_sym.version.in configure.in NEWS docs/*: release
  of 0.5.1
* po/*: updated and regenerated
daniel
2008-12-04 15:54:26 +00:00
Daniel Veillard
517ff04bec Release of 0.5.0
* configure.in docs/* NEWS: release of 0.5.0
* po/*: updated from the translators and merged
* docs/apibuild.py src/libvirt.c: avoid some warnings at doc
  generation time
daniel
2008-11-25 15:48:11 +00:00
Daniel P. Berrange
1eeceaa649 Support domain lifecycle events for Xen (Ben Guthro & Daniel Berrange) 2008-11-25 10:44:52 +00:00
Daniel P. Berrange
0793e73c02 Public API for node device enumeration (David Lively) 2008-11-21 12:19:22 +00:00
Daniel P. Berrange
714bef5b6a Add an initial User Mode Linux Driver 2008-11-19 16:58:23 +00:00
Daniel P. Berrange
6d04effac7 Add a virFreeCallback to event loop APIs 2008-11-19 16:24:01 +00:00
Daniel P. Berrange
6d41cb87d3 Change public API for virEventAddHandle to allow multiple registrations per FD 2008-11-19 16:19:36 +00:00
Daniel P. Berrange
3d41e86534 Add a virFreeCallback to virDomainEventRegister (from David Lively) 2008-11-19 15:25:24 +00:00
Daniel P. Berrange
d3d54d2fc9 Add domain events detail information 2008-11-17 16:43:00 +00:00
Daniel P. Berrange
48e9d7b726 Fix domain events python thread safety & incorrect enum generation 2008-11-17 10:26:09 +00:00
Daniel P. Berrange
bfc86e8a74 Fix syntax check errors 2008-10-24 12:05:39 +00:00
Daniel Veillard
1509b8027f Massive patch adding event APIs by Ben Guthro
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
  src/libvirt.c src/libvirt_sym.version: new libvirt event entry
  points, big patch provided by Ben Guthro
* Makefile.am configure.in src/driver.h src/event.c src/event.h
  src/internal.h src/libvirt.c src/libvirt_sym.version src/lxc_driver.c
  src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
  src/remote_internal.c src/storage_backend_fs.c src/test.c
  qemud/event.c qemud/event.h qemud/mdns.c qemud/qemud.c
  qemud/qemud.h qemud/remote.c qemud/remote_dispatch_localvars.h
  qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
  qemud/remote_protocol.c qemud/remote_protocol.h
  qemud/remote_protocol.x proxy/Makefile.am python/generator.py:
  Not much is left untouched by the patch adding the events support
* docs/libvirt-api.xml docs/libvirt-refs.xml
  docs/html/libvirt-libvirt.html: regenerated the docs
* examples/domain-events/events-c/Makefile.am
  examples/domain-events/events-c/event-test.c: a test example
* AUTHORS: added Ben Guthro
daniel
2008-10-23 13:18:18 +00:00
Jim Meyering
164fbbd6e6 generate .gitignore files from .cvsignore ones
* Makefile.maint (sync-vcs-ignore-files): New target.
Prompted by a patch from James Morris.
http://thread.gmane.org/gmane.comp.emulators.libvirt/8619/focus=8773
Add all (now-generated) .gitignore files.
* .gitignore: New file.
* build-aux/.gitignore: New file.
* docs/.gitignore: New file.
* docs/devhelp/.gitignore: New file.
* docs/examples/.gitignore: New file.
* docs/examples/python/.gitignore: New file.
* gnulib/lib/.gitignore: New file.
* gnulib/lib/arpa/.gitignore: New file.
* gnulib/lib/netinet/.gitignore: New file.
* gnulib/lib/sys/.gitignore: New file.
* gnulib/tests/.gitignore: New file.
* include/.gitignore: New file.
* include/libvirt/.gitignore: New file.
* po/.gitignore: New file.
* proxy/.gitignore: New file.
* python/.gitignore: New file.
* python/tests/.gitignore: New file.
* qemud/.gitignore: New file.
* src/.gitignore: New file.
* tests/.gitignore: New file.
* tests/confdata/.gitignore: New file.
* tests/sexpr2xmldata/.gitignore: New file.
* tests/virshdata/.gitignore: New file.
* tests/xencapsdata/.gitignore: New file.
* tests/xmconfigdata/.gitignore: New file.
* tests/xml2sexprdata/.gitignore: New file.
2008-10-17 10:03:15 +00:00
Daniel Veillard
f6803c960f virDomainDefineXML, and a few additional cleanups
* include/libvirt/libvirt.h[.in] include/libvirt/virterror.h
  qemud/remote* src/driver.h src/libvirt.c src/libvirt_sym.version
  src/lxc_driver.c src/openvz_driver.c src/proxy_internal.c
  src/qemu_driver.c src/remote_internal.c src/test.c src/virsh.c
  src/xen_internal.c src/xen_unified.c src/xen_unified.h
  src/xend_internal.c src/xend_internal.h src/xm_internal.c
  src/xs_internal.c docs/*: cleanup virDomainCreateLinux into
  virDomainDefineXML, and a few additional cleanups
Daniel
2008-10-10 09:32:27 +00:00
Daniel Veillard
321c9a7f51 * configure.in libvirt.spec.in NEWS docs/*: release of libvirt-0.4.6
* src/storage_backend_logical.c: re-add the -f flag to vgremove
* po/*: rebuilt
Daniel
2008-09-23 20:48:49 +00:00
Richard W.M. Jones
a744ddad59 include/libvirt/libvirt.h.in, src/libvirt.c: Fix comments
which incorrectly referred to non-existent 'virDomainFlags'
type (Anton Protopopov).
2008-09-17 14:15:20 +00:00
Daniel Veillard
9d3d43436e * configure.in libvirt.spec.in docs/*: preparing release of
libvirt-0.4.5
* po/*: rebuilt and updated de.po
daniel
2008-09-08 14:32:18 +00:00
Daniel P. Berrange
39c9354c5c Add storage pool source discovery support (patch from David Lively) 2008-08-27 20:05:58 +00:00
Daniel Veillard
01fd287bcd Remove Xen centric comments, rebuild the docs
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in:
  remove Xen centric comments patch from Guido Günther
* docs/apibuild.py: ignore VIR_DEPRECATED
* docs/libvirt-*.xml docs/html/libvirt-*.html: regenerated the
  documentation for the API
Daniel
2008-07-25 08:52:19 +00:00
Daniel P. Berrange
d1304583d6 Added generic domain XML APIs 2008-07-11 16:23:36 +00:00
Daniel P. Berrange
747fad6654 Generic APIs for network XML configuration 2008-07-11 10:48:34 +00:00
Daniel Veillard
93db3c61c0 * configure.in NEWS libvirt.spec* doc/* po/*: making libvirt-0.4.4
release
* src/xm_internal.c: fix xm driver serialization escapes
* tests/xmconfigtest.c tests/xmconfigdata/test-escape-paths.cfg
  tests/xmconfigdata/test-escape-paths.xml: add test for previous
  problem
Daniel
2008-06-25 08:59:37 +00:00
Daniel Veillard
7db4c905d7 * configure.in NEWS libvirt.spec* doc/* po/*: making libvirt-0.4.3
release
Daniel
2008-06-12 16:10:50 +00:00
Richard W.M. Jones
6bcf25017b virDomainMemoryPeek API
* include/libvirt/libvirt.h.in, src/libvirt.c, src/driver.h,
          src/libvirt_sym.version: New virDomainMemoryPeek API.
        * qemud/remote.c, qemud/remote_protocol.x, src/remote_internal.c:
          Support for remote.
        * src/qemu_driver.c: QEMU driver implementation of API.
        * src/test.c: Test driver (null) implementation of API.
        * docs/hvsupport.html.in: Document API.
        * libvirt.spec.in: New path /var/cache/libvirt for temporary
          storage of memory images.
        * qemud/libvirtd.init.in: Remove any old temp files in
          /var/cache/libvirt on restarts.
        * src/Makefile.am: make install creates /var/cache/libvirt.
        * configure.in: Detect mkdir -p.
2008-06-10 10:43:28 +00:00
Richard W.M. Jones
8354895e68 virDomainBlockPeek call
* configure.in: Document AC_SYS_LARGEFILE.
	* docs/hvsupport.html.in: Document HV support for virDomainBlockPeek.
	* include/libvirt/libvirt.h.in, src/driver.h, src/libvirt.c,
	src/libvirt_sym.version: Add virDomainBlockPeek infrastructure.
	* src/qemu_driver.c, src/test.c: Null versions of this call.
	* src/xen_unified.c, src/xend_internal.c, src/xend_internal.h,
	src/xm_internal.c, src/xm_internal.h: Xen implementation.
	* tests/sexpr2xmldata/sexpr2xml-curmem.xml,
	tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: XML output
	has been reordered slightly in the Xen driver, but should be
	functionally the same.
2008-06-05 13:17:45 +00:00
Richard W.M. Jones
f60dc0bc09 Deprecate the conn, dom and net fields in the _virError structure.
* include/libvirt/libvirt.h.in: Add VIR_DEPRECATED macro.
	* src/internal.h: Internal code is allowed to use deprecated
	features, so override VIR_DEPRECATED here.
	* include/libvirt/virterror.h: Deprecate the conn, dom and net
	fields in the _virError structure.
2008-05-23 08:32:08 +00:00
Atsushi SAKAI
b87f3000aa Change libvirtd description from qemu only to various VM(i.e. Xen, LXC)
Fix typos and comments
2008-05-15 06:12:32 +00:00
Jim Meyering
5bf824ea10 convert TAB-based indentation in C sources to use only spaces
Done using this command (also includes .c.in and .h.in files):
for i in $(g ls-files|grep -E '\.[ch](\.in)?$'|grep -v gnulib); do
  expand -i $i > j && mv j $i;done
2008-04-10 16:54:54 +00:00
Richard W.M. Jones
c1bc644bad Warn about conn, dom and net fields in virterror
* include/libvirt/virterror.h: Warn about the use of
          conn, dom and net fields in virterror.
2008-04-09 14:00:07 +00:00
Daniel Veillard
5b470f32c3 0.4.2 release
* configure.in NEWS doc/* po/*: making libvirt-0.4.2 release
daniel
2008-04-08 16:45:57 +00:00
Daniel Veillard
f163895204 Initial Linux containers work
* configure.in include/libvirt/virterror.h src/Makefile.am
  src/driver.h src/lxc_conf.[ch] src/lxc_driver.[ch] src/virterror.c:
  Applied 3 patches from Dave Leskovec for intial support of
  Linux containers, configured off by default, work in progress.
* src/libvirt.c: improve virDomainCreateLinux xmlDesc description
Daniel
2008-03-21 15:03:37 +00:00
Daniel Veillard
08ecf61b35 * NEWS virsh.1 docs//* include/libvirt/libvirt.h[.in] qemud/mdns.h
src/libvirt.c src/qemu.conf src/remote_internal.c src/xend_internal.c
  tests/confdata/libvirtd.conf tests/confdata/libvirtd.out: patch from
  Atsushi SAKAI fixing a ot more typo
Daniel
2008-03-17 10:27:31 +00:00
Richard W.M. Jones
3e59e29859 Fix typo "informations" -> "information" (Atsushi SAKAI and
Saori FUKUTA).
2008-03-14 11:08:03 +00:00
Daniel Veillard
6a17c6c652 Release of 0.4.1
* NEWS configure.in libvirt.spec.in docs/* include/libvirt/libvirt.h
  po/*: preparing release of libvirt-0.4.1
Daniel
2008-03-03 14:42:37 +00:00
Daniel Veillard
3e1aaf27fe missing comments for _virDomainBlockStats fields
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in:
  missing comments for _virDomainBlockStats fields
* docs/*: rebuilt docs
Daniel
2008-03-03 06:18:06 +00:00
Richard W.M. Jones
bb8340c18d Many typos fixed (Atsushi SAKAI). 2008-02-29 12:53:10 +00:00
Daniel P. Berrange
20878720c0 Added main internal storage driver impl 2008-02-20 15:34:52 +00:00
Daniel P. Berrange
cb228a0e24 Internal driver API for storage management 2008-02-20 15:06:53 +00:00
Daniel P. Berrange
e1d2e325dd Add public API for storage management 2008-02-20 14:57:39 +00:00
Jim Meyering
e04912a9f0 Remove all trailing blanks; turn on the rule to detect them.
* Makefile.cfg (local-checks-to-skip): Remove sc_trailing_blank.
* .x-sc_trailing_blank: New file, to exempt the few binary files.
2008-02-05 19:27:37 +00:00
Daniel Veillard
6cb0289917 * configure.in docs/libvir.html docs/news.html po/*:
prepare release of libvirt-0.4.0
Daniel
2007-12-17 23:20:12 +00:00
Daniel P. Berrange
e332ccdf71 Wire up SASL interaction callbacks to libvirt callbacks. Provide default callback impl 2007-12-05 18:55:04 +00:00
Daniel P. Berrange
7fa9ceb740 Added public API for authentication credential callback support 2007-12-05 18:28:05 +00:00
Daniel P. Berrange
1b1d647439 Initial integration of SASL authentication, working for Kerberos only 2007-12-05 15:24:15 +00:00
Richard W.M. Jones
4ef3a4ea7c Tue Nov 20 10:49:28 UTC 2007 Richard W.M. Jones <rjones@redhat.com>
* src/virterror.c, src/stats_linux.c, include/libvirt/virterror.h:
	  Renamed the VIR_FROM_LINUX error as VIR_FROM_STATS_LINUX for
	  consistency.
2007-11-20 10:58:21 +00:00
Daniel Veillard
aab34d876e * include/libvirt/virterror.h src/openvz_conf.c src/openvz_driver.c
src/stats_linux.c src/virterror.c src/xm_internal.c: patch from
  Saori Fukuta cleaning up various problems in the error reporting
  layers
Daniel
2007-11-20 10:15:38 +00:00
Daniel P. Berrange
b4fab30b89 Mark XML param for attach/detach APIs const 2007-10-15 21:38:56 +00:00
Richard W.M. Jones
503cca7cee Mon Oct 15 15:31:00 BST 2007 Richard W.M. Jones <rjones@redhat.com>
* src/test.c, include/libvirt/libvirt.h.in: Remove virDomainRestart
        from the public API (it was not used), and move it into the test
        driver where it is used for purely internal purposes.
2007-10-15 14:32:35 +00:00
Daniel Veillard
fdc44cf1b7 * configure.in libvirt.spec.in include/libvirt/libvirt.h docs/*:
preparing release of 0.3.3
* po/*: updated the strings localizations
Daniel
2007-09-30 21:09:29 +00:00
Daniel Veillard
9f211bbf3a * include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/driver.h src/libvirt.c src/openvz_driver.c src/qemu_driver.c
  src/test.c src/xen_unified.c src/xend_internal.c: add new API
  virNodeGetFreeMemory(), extends the driver. Lacks remote and
  QEmu support though.
* src/libvirt.c: allows to fix virNodeGetCellsFreeMemory() adding
  parameter check for startCell.
* proxy/libvirt_proxy.c src/xend_internal.[ch]
  include/libvirt/libvirt.h include/libvirt/libvirt.h.in: applied
  vncpasswd dump patch from Mark Johnson but with the
  virDomainXMLFlags extension as suggested by Daniel Berrange
  this changed a couple of internal APIs too
* tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: fix one of the
  tests affected by bootloader dump change.
Daniel
2007-09-30 13:09:07 +00:00
Daniel Veillard
4bf3bc9eda * include/libvirt/libvirt.h[.in] src/driver.h src/openvz_driver.c
src/qemu_driver.c src/remote_internal.c src/test.c
  src/xen_internal.[ch] src/xen_unified.c src/xend_internal.[ch]
  src/libvirt.c src/libvirt_sym.version: adding NUMA support patches
  from Beth Kon adding new virNodeGetCellsFreeMemory entry point
  and extending the virConnectGetCapabilities one. Fix a couple of
  issues in the patch and add to exported symbols from shared lib.
* docs/virsh.pod docs/virsh.1 src/virsh.c: added new command
  freecell to get the available memory on the node or in a NUMA cell.
* docs/*: updated and regenerated the documentation
Daniel
2007-09-28 14:28:12 +00:00
Daniel Veillard
298d289542 * include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/libvirt.c: fixes a few problems in the documentation
  pointed out by Toth Istvan.
* docs/*: regenerated the docs
Daniel
2007-09-10 09:37:10 +00:00
Daniel Veillard
cb2e35b604 * configure.in libvirt.spec.in include/libvirt/libvirt.h docs/*:
preparing release of 0.3.2
* src/libvirt.c: fix a couple of comments
* po/*: string localization merge/update
Daniel
2007-08-21 14:59:47 +00:00
Richard W.M. Jones
442a15770c Tue Aug 21 10:58:00 BST 2007 Richard W.M. Jones <rjones@redhat.com>
* src/libvirt.c (virDomainBlockStats, virDomainInterfaceStats):
	  Added block device and network interface statistics.
	* src/xen_internal.c: Support for stats from Xen domains.
	* qemud/remote.c, qemud/remote_protocol.x, qemud/remote_internal.c:
	  Support for fetching device and network interface stats
	  across remote connections.
	* src/virsh.c: Added 'virsh domblkstat' and 'virsh domifstat'
	  commands to display stats.
	* docs/libvir.html, docs/hvsupport.html: Updated hvsupport
	  documentation.
2007-08-21 10:08:12 +00:00
Richard W.M. Jones
81005437f4 Tue Aug 21 10:21:00 BST 2007 Richard W.M. Jones <rjones@redhat.com>
* src/libvirt.c (virDomainMigrate): Added virDomainMigrate
	  API call.
	* src/xend_internal.c, src/xen_unified.c: Support for migration
	  of Xen domains.
	* src/xen_internal.c: Xen capabilities indicates level of
	  support for migration.
	* qemud/remote.c, qemud/remote_protocol.x, src/remote_internal.c:
	  Support for migration between remote hypervisors.
	* src/virsh.c: Added 'virsh migrate' command.
	* docs/libvir.html, docs/hvsupport.html: Updated hvsupport
	  documentation.
2007-08-21 09:31:12 +00:00
Daniel Veillard
d2cf974b6e Oops forgot to rev in configure.in, Daniel 2007-07-24 15:58:41 +00:00
Daniel Veillard
68ef3443d4 * src/Makefile.am src/openvz_conf.c src/openvz_conf.h
src/openvz_driver.c src/qemu_driver.c src/util.c src/util.h:
  cleanup patches from Shuveb Hussain, with new util module for
  common code shared between drivers.
Daniel
2007-07-19 16:22:40 +00:00
Daniel Veillard
6365ff098c * src/test.c include/libvirt/libvirt.h include/libvirt/libvirt.h.in:
cleanup of unused virDeviceMode
Daniel
2007-07-18 10:11:09 +00:00
Daniel Veillard
5ced7bd1fc * src/virterror.c src/xml.c include/libvirt/virterror.h:
patch from Masayuki Sunou to check Ethernet MAC addresses
  in XML configs
* po/*: string update and merge
Daniel
2007-07-13 08:26:57 +00:00
Daniel Veillard
f3d774d6c1 * configure.in libvirt.spec.in include/libvirt/libvirt.h
docs/* po/*: prepared release of 0.3.0
Daniel
2007-07-09 12:41:29 +00:00
Richard W.M. Jones
b26376750e Fri Jul 6 15:54:00 BST 2007 Richard W.M. Jones <rjones@redhat.com>
* include/libvirt/virterror.h, src/virterror.c, src/libvirt.c:
	  Add VIR_ERR_NO_DOMAIN and VIR_ERR_NO_NETWORK errors, which
	  indicate that there is no domain/network from vir*Lookup* functions.
	* src/qemu_driver.c: Use VIR_ERR_NO_DOMAIN in lookup functions.
	* src/test.c: Use VIR_ERR_NO_DOMAIN in lookup functions.
2007-07-06 14:56:15 +00:00
Richard W.M. Jones
2be812bbc9 Tue Jun 26 12:40:00 BST 2007 Richard W.M. Jones <rjones@redhat.com>
* include/libvirt/libvirt.h.in, src/libvirt.c: (and numerous
	  other files) Added support for virConnectGetHostname
	  and virConnectGetURI calls.
2007-06-26 11:42:46 +00:00
Richard W.M. Jones
aa053ba2c5 Mon Jun 25 16:55:00 BST 2007 Richard W.M. Jones <rjones@redhat.com>
* include/libvirt/libvirt.h.in, src/libvirt.c, src/libvirt_sym.version,
	  python/generator.py: Added virDomainGetConnect and
	  virNetworkGetConnect to allow us to get the "hidden"
	  connection associated with each domain or network.
2007-06-25 15:56:18 +00:00
Richard W.M. Jones
83471f1ec5 Mon Jun 25 14:30:00 BST 2007 Richard W.M. Jones <rjones@redhat.com>
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in,
	  src/test.c: Remove unused virDomainKernel structure.
2007-06-25 13:26:02 +00:00
Richard W.M. Jones
e2df281e6c Wed Jun 20 18:23:00 BST 2007 Richard W.M. Jones <rjones@redhat.com>
* src/libvirt.c, src/qemu_internal.c, src/test.c,
	  src/xen_unified.c, src/xend_internal.c,
	  src/libvirt.c, include/libvirt/virterror.h:
	  VIR_ERR_NO_SUPPORT means the function is not supported by
	  the hypervisor.  VIR_ERR_NO_CONNECT means the connection
	  failed.  VIR_ERR_CALL_FAILED is deprecated.  Drivers which
	  decline a URI now no longer produce an error.  Make
	  xen_unified.c ignore naked URI strings like "foo".
2007-06-20 17:25:39 +00:00
Daniel Veillard
29e65f9a98 * configure.in libvirt.spec.in include/libvirt/libvirt.h
docs/*: prepared release of 0.2.3
Daniel
2007-06-08 11:11:56 +00:00
Daniel Veillard
2a10972010 * src/libvirt.c: do not die if the daemon is not running on a Xen
system (shows up as root only) and emit a warning instead
* src/virterror.c include/libvirt/virterror.h docs/*: add
  the new warning.
Daniel
2007-06-07 13:05:00 +00:00
Daniel Veillard
652f3bb13b * include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/driver.h src/libvirt.c src/libvirt_sym.version
  src/proxy_internal.c src/qemu_internal.c src/test.c
  src/virsh.c src/xen_internal.c src/xen_internal.h src/xen_unified.c
  src/xend_internal.c src/xm_internal.c src/xs_internal.c:
  Applied patches from Atsushi SAKAI to add the scheduler API,
  with patch from Rich Jones for error handing, and a number
  of cleanups and more error checking from me
Daniel
2007-06-05 12:06:08 +00:00
Richard W.M. Jones
04231acb2b Thu May 3 15:03:00 BST 2007 Richard Jones <rjones@redhat.com>
* src/virterror.c, include/libvirt/virterror.h: Added
	  VIR_FROM_REMOTE, VIR_ERR_RPC, VIR_ERR_GNUTLS_ERROR
	  for remote errors.
2007-05-03 14:00:18 +00:00
Richard W.M. Jones
dbcc662ea3 Wed Apr 18 11:12:00 BST 2007 Richard W.M. Jones <rjones@redhat.com>
* src/test.c, src/libvirt.c, src/virterror.c,
	  include/libvirt/virterror.h: Add a VIR_FROM_TEST error class
	  and ensure that test driver errors are from this class.
	  Tidy up the error messages generated by the test driver when
	  user doesn't add a path to the URL and avoid open ("/").
2007-04-18 10:14:07 +00:00
Daniel Veillard
9ab00c05bf * docs/* NEWS libvirt.spec.in: prepare release of 0.2.2
* docs/apibuild.py: do not scan xen_unified for APIs.
Daniel
2007-04-17 09:33:51 +00:00
Daniel Veillard
b50353f80f last changes for 0.2.1, daniel 2007-03-16 22:26:55 +00:00
Daniel Veillard
635ae38979 * include/libvirt/libvirt.h[.in] include/libvirt/virterror.h
proxy/libvirt_proxy.c qemud/Makefile.am qemud/conf.c qemud/conf.h
  qemud/dispatch.c qemud/internal.h qemud/protocol.h
  src/driver.h src/internal.h src/libvirt.c src/libvirt_sym.version
  src/proxy_internal.c src/proxy_internal.h src/qemu_internal.c
  src/test.c src/virsh.c src/virterror.c src/xen_internal.c
  src/xen_internal.h src/xend_internal.c src/xm_internal.c
  src/xml.h src/xs_internal.c: applied patch from Richard Jones
  adding virConnectGetCapabilities(), plus various small little
  fixes
* docs/*: fixed the api extractor script and regenerated
Daniel
2007-03-15 17:24:56 +00:00
Daniel Veillard
b412cfadb5 * include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/driver.h src/libvirt.c src/libvirt_sym.version
  src/proxy_internal.c src/qemu_internal.c src/test.c src/virsh.c
  src/xen_internal.c src/xen_internal.h src/xend_internal.c
  src/xm_internal.c src/xs_internal.c: applied patch from
  Masayuki Sunou to add and entry point to check the maximum
  number of virtual CPU supported by a virtualization mechanism
* doc/*.html doc/libvirt-*.xml: regenerated the interfaces descriptions
  and associated docs.
Daniel
2007-03-08 08:31:07 +00:00
Daniel P. Berrange
d6db609d74 Fixed up numerous compiler warnings 2007-03-06 21:55:44 +00:00
Mark McLoughlin
57a1819881 Fri Feb 23 08:49:12 IST 2007 Mark McLoughlin <markmc@redhat.com>
* include/libvirt/libvirt.h.in, src/libvirt.c add
        virDomainGetAutostart(), virDomainSetAutostart(),
        virNetworkGetAutostart() and virNetworkSetAutostart().

        * src/libvirt_sym.version: export the API

        * src/driver.h: add methods to the driver vtables.

        * src/proxy_internal.c, src/qemu_internal.c,
          src/test.c, src/xen_internal.c, src/xend_internal.c,
          src/xm_internal.c, src/xs_internal.c: set those
        methods to NULL
2007-02-23 08:51:30 +00:00
Mark McLoughlin
68f1003652 Thu Feb 22 10:37:08 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: fix another xml property leak.
2007-02-22 10:39:38 +00:00
Mark McLoughlin
1e20b80a91 Fri Feb 20 17:49:22 IST 2007 Mark McLoughlin <markmc@redhat.com>
Fix a few leaks

        * qemud/qemud.c: qemudCleanup(): free the socket
        structures

        * qemud/conf.c: fix various leaks in the xml parsing

        * qemud/iptables.c: fix a typo causing a leak
2007-02-20 17:51:41 +00:00
Daniel Veillard
2edf53128e * configure.in NEWS include/libvirt/libvirt.h docs/* docs/apibuild.py:
prepare release of 0.2.0, update doc, avoid console module for API.
* po/*: regenerated
Daniel
2007-02-14 18:08:45 +00:00
Mark McLoughlin
081c8d435c Tue Feb 14 16:35:56 IST 2007 Mark McLoughlin <markmc@redhat.com>
* autogen.sh: run autoheader before automake
2007-02-14 16:35:47 +00:00
Mark McLoughlin
8356c43e42 Tue Feb 14 16:17:51 IST 2007 Mark McLoughlin <markmc@redhat.com>
* include/libvirt/libvirt.h.in, src/libvirt.c: add
        virNetworkGetBridgeName() to allow finding out what
        bridge to connect to in order to join a network.

        * src/driver.h: add networkGetBridgeName() to vtable.

        * qemud/protocol.h: add the request and reply to
        the qemud protocol.

        * qemud/dispatch.c, qemud/driver.[ch]: handle them
        here.

        * src/qemu_internal.c: implement GetBridgeName()
        in the qemu driver.

        * src/libvirt_sym.version: add new symbol.
2007-02-14 16:20:38 +00:00
Mark McLoughlin
8ce3203ad3 Tue Feb 14 15:37:17 EST 2007 Mark McLoughlin <markmc@redhat.com>
Note: potential ABI break here, but people should
        only really be using virError structs returned from
        libvirt itself.

        * include/libvirt/virterror.h: add virNetwork
        to virError

        * src/internal.h, src/virterror.c: add network param
        to __virRaiseError()

        * src/conf.c, src/hash.c, src/libvirt.c, src/proxy_internal.c,
        src/qemu_internal.c, src/sexpr.c, src/test.c, src/xen_internal.c,
        src/xend_internal.c, src/xm_internal.c, src/xml.c, src/xmlrpc.c,
        src/xs_internal.c: update.
2007-02-14 15:40:53 +00:00
Mark McLoughlin
5be54b40cb Tue Feb 14 15:33:05 EST 2007 Mark McLoughlin <markmc@redhat.com>
* include/libvirt/libvirt.h.in: add the networks APIs

        * include/libvirt/virterror.h: add some error codes

        * src/driver.h: add network driver vtable

        * src/hash.c: add networks hash

        * src/internal.h: add virNetwork

        * src/libvirt.c: hook up the APIs to the network
        driver

        * src/libvirt_sym.version: add the new APIs

        * src/virterror.c: handle the new error codes
2007-02-14 15:37:18 +00:00
Daniel P. Berrange
23ad665cb0 Added QEMU support 2007-02-14 01:40:09 +00:00
Daniel Veillard
f873796e20 * autogen.sh: applied patch from Richard W.M. Jones to not
output instructions if configure failed
Daniel
2007-01-26 11:12:56 +00:00
Mark McLoughlin
6d153563be Mon Jan 23 14:36:18 IST 2007 Mark McLoughlin <markmc@redhat.com>
* include/libvirt/libvirt.h.in: add VIR_UUID_BUFLEN and
        VIR_UUID_STRING_BUFLEN

        * libvirt/proxy/libvirt_proxy.c, libvirt/src/hash.c,
        libvirt/src/internal.h, libvirt/src/libvirt.c,
        libvirt/src/proxy_internal.c, libvirt/src/test.c,
        libvirt/src/virsh.c, libvirt/src/xend_internal.c,
        libvirt/src/xm_internal.c, libvirt/src/xml.c,
        libvirt/python/libvir.c: use them
2007-01-23 14:39:45 +00:00
Daniel Veillard
8f8397df7f * configure.in libvirt.spec.in docs/*.html include/libvirt/libvirt.h:
preparing release of 0.1.11
* docs/Makefile.am libvirt.spec.in: package libvirt.rng in
* po/*: translation update
Daniel
2007-01-22 15:31:00 +00:00
Daniel Veillard
4a475773f7 * po/*: updated localization files
* configure.in NEWS libvirt.spec.in docs/libvir.html docs/news.html
  include/libvirt/libvirt.h: preparing release of 0.1.10
Daniel
2006-12-20 14:54:25 +00:00
Daniel Veillard
91641070d2 * NEWS configure.in libvirt.spec.in docs/libvir.html docs/news.html
include/libvirt/libvirt.h: preparing libvirt-0.1.9 release
* po/*.po: more updates and fix all the .po to not barf when msgfmt
  tries to process them
Daniel
2006-11-29 13:03:24 +00:00
Daniel Veillard
66ab526b3f * docs//*: regenerated
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in src/driver.h
  src/libvirt.c src/proxy_internal.c src/test.c src/virsh.c
  src/xen_internal.c src/xend_internal.c src/xm_internal.c
  src/xs_internal.c: added support for dumping core of domains
  assuming a xend with the latest patch to do so.
Daniel
2006-11-22 17:48:29 +00:00
Daniel Veillard
dc28f35f11 * include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/driver.h src/libvirt.c src/libvirt_sym.version
  src/proxy_internal.c src/test.c src/xen_internal.c
  src/xend_internal.c src/xml.c src/xml.h src/xs_internal.c:
  intagrated patch from Michel Ponceau to add hot-plug devices
  support to the API, integrated in driver API and fixed
  a few small things. Still a TODO in src/xml.c about
  moving xenstore direct accesses to a new routine.
Daniel
2006-11-16 18:11:28 +00:00
Daniel Veillard
892a8c3881 * include/libvirt/virterror.h src/virterror.c src/xend_internal.c
src/xml.c: give proper indication of the failures raised by the
  XML parser on not well formed XML, should fix rhbz#208545
Daniel
2006-11-08 16:55:20 +00:00
Daniel Veillard
297a77f6da * config.h.in configure.in libvirt.spec.in docs/libvir.html
docs/news.html include/libvirt/libvirt.h: preparing release of
  libvirt-0.1.8
* src/xen_internal.c: fixed a compilation problem
Daniel
2006-10-16 16:04:55 +00:00
Daniel Veillard
be13e2f45d * docs/* libvirt.spec.in configure.in NEWS: preparing release of 0.1.7
Daniel
2006-09-29 10:25:21 +00:00
Daniel Veillard
2cb26d70d6 * docs/* libvirt.spec.in configure.in NEWS: preparing release of 0.1.6
Daniel
2006-09-22 09:58:17 +00:00
Daniel Veillard
786e029cd7 * NEWS configure.in docs//* include/libvirt/libvirt.h libvirt.specx.*:
preparing release 0.1.5
* proxy/libvirt_proxy.c src/xen_internal.c: tiny fixes
Daniel
2006-09-05 06:48:44 +00:00
Daniel P. Berrange
25726a0ff4 Added driver backends for ListDefinedDomains, NumOfDefinedDomains, DomainStart, DomainDefineXML, DomainUndefine & hooked up all related infrastructure 2006-08-30 14:21:03 +00:00
Daniel Veillard
3bbac7cdb6 * TODO libvirt.spec.in: update
* configure.in include/libvirt/virterror.h src/Makefile.am
  src/conf.c src/conf.h src/virterror.c src/xen_internal.c:
  adding a subset of Xen config file parser, and serializer
* tests/Makefile.am tests/conftest.c tests/test_conf.sh
  tests/confdata/Makefile.am tests/confdata/fc4.conf
  tests/confdata/fc4.out: adding test program for config in and out
Daniel
2006-08-29 22:27:07 +00:00
Daniel Veillard
6d1ef709cc * NEWS configure.in doc//* include/libvirt/libvirt.h
include/libvirt/libvirt.h.in: preparing release of 0.1.4,
  regenerated docs, fixed a few things
* src/proxy_internal.c src/test.c src/xend_internal.c:
  a few trivial fixes
Daniel
2006-08-16 17:58:23 +00:00
Daniel Veillard
b084f43f71 * include/libvirt/virterror.h src/libvirt.c src/virterror.c: enforce
blocking operations with side effect on read-only connections. Adds
  a new error code and message.
Daniel
2006-08-16 16:14:53 +00:00
Daniel Veillard
345c959db9 * include/libvirt/libvirt.h.in: previous change to libvirt.h should
have gone on .in too
Daniel
2006-08-07 17:37:42 +00:00
Daniel P. Berrange
f7e0594f87 Added vcpuinfo vcpupin commands to virsh. Fixed off by one bug in virDomainVcpuPin method 2006-08-07 14:35:20 +00:00
Daniel Veillard
7a8a63380f * include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/libvirt.c src/libvirt_sym.version src/xen_internal.c
  src/xen_internal.h src/xend_internal.c src/xend_internal.h:
  applied patch from Michel Ponceau and Philippe Berthault for
  virtual CPU and affinity support plus a bit of cleanup.
Daniel
2006-08-04 10:41:05 +00:00
Daniel Veillard
0798941a85 * configure.in libvirt.spec.in docs/* NEWS: preparing release of
libvirt-0.1.3
* src/xend_internal.c: uninitialized var and disable TCP slow start
Daniel
2006-07-11 16:57:03 +00:00
Mark McLoughlin
5004bee519 unleash the hush puppies 2006-07-05 21:52:52 +00:00
Daniel Veillard
567b42ce6a * NEWS docs/* configure.in libvirt.spec.in include/libvirt/libvirt.h:
preparing release of 0.1.2
* src/proxy_internal.c: don't warn on open if using http and not the
  proxy.
Daniel
2006-07-03 15:48:49 +00:00
Daniel Veillard
27b7a8be52 * configure.in Makefile.am proxy/Makefile.am proxy/libvirt_proxy.c
proxy/proxy.h proxy/proxy_client.c src/internal.h src/xen_internal.c
  src/xend_internal.c: started working on a proxy to access xend
  for unpriviledged users to avoid opening xend HTTP service to
  serve those read-only operations.
Daniel
2006-06-28 18:19:13 +00:00
Daniel Veillard
b62cdc1405 * configure.in libvirt.spec.in docs/examples/* include/Makefile.am
include/libvirt/virterror.h python/generator.py python/libvir.c
  python/libvirt_wrap.h src/driver.h src/internal.h src/test.h
  src/virsh.c src/virterror.c src/xend_internal.c src/xend_internal.h
  src/xml.c src/xml.h: moved the includes from include/ to
  include/libvirt to reflect the installed include tree. This
  avoid using "" in the includes themselves.
Daniel
2006-06-26 15:02:18 +00:00
Daniel Veillard
17af6e0a9b * NEWS libvirt.spec.in docs/*: preparing release of 0.1.1
Daniel
2006-06-21 13:36:07 +00:00
Karel Zak
d47ddf5b67 support mock & domuuid for virsh 2006-05-29 15:39:31 +00:00
Karel Zak
624505349d UUID utils, virsh cleanup, ... 2006-05-22 14:38:33 +00:00
Karel Zak
fd6d06b49d XML-RPC errors checks 2006-05-10 14:48:20 +00:00
Daniel Veillard
bfee5cd2cd * src/hash.c src/internal.h src/libvirt.c src/virterror.c
src/xml.h include/libvirt.h[.in] include/virterror.h: started
  adding new APIs, some still TODO, and not tested yet
Daniel
2006-04-28 18:29:26 +00:00
Daniel Veillard
e081236077 * include/libvirt.h include/libvirt.h.in doc/*: added new entry point
virDomainSetMemory to set up the target memory use for a domain
* src/driver.h src/libvirt.c src/xen_internal.c src/xend_internal.[ch]
  src/xs_internal.[ch]: added a new entry point in the drivers for this,
  also fixed the xen store entry, as changing
  /local/domain/$$/memory/target affects the target memory not the max,
  apparently max is not visible at the xenstore level (or I missed it)
Daniel
2006-04-13 17:18:49 +00:00
Daniel Veillard
cb8f47047b * NEWS configure.in libvirt.spec.in docs/*: documented and
regenerated for release of 0.1.0
* Makefile.am virsh.1: added man page from Andrew Puch
Daniel
2006-04-10 14:15:33 +00:00
Karel Zak
f7e40ae879 add nodeinfo, rename dinfo to dominfo, fix libvirt.h typo 2006-04-04 14:37:32 +00:00
Daniel Veillard
831f910e50 * include/libvirt.h[.in] src/driver.h src/libvirt.c
src/libvirt_sym.version src/*_internal.[ch]: added an entry
  point for reboot and corresponding driver plug
* src/virsh.c: added a reboot option using it
* docs/*: regenerated
Daniel
2006-04-03 13:46:43 +00:00
Daniel Veillard
212eaea323 * include/libvirt.h[.in] include/virterror.h src/driver.h
src/internal.h src/libvirt_sym.version src/xen_internal.c
  src/xs_internal.c: added a new entry point to get node hardware
  informations virGetNodeInfo, and associated driver hook.
* src/xend_internal.c: implemented the node and version information
  hooks for the Xen Daemon
* python/libvir.c python/libvirt-python-api.xml python/generator.py:
  also added Python bindings for the new call
Daniel
2006-03-29 12:46:03 +00:00