V2 of the libxl soft reset patch, which was pushed as commit da4b0fd9,
dropped the hunk that disposed of the libxl_domain_config object. Add
the missing hunk to properly dispose the object.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The pvops Linux kernel implements machine_ops.crash_shutdown as
static void xen_hvm_crash_shutdown(struct pt_regs *regs)
{
native_machine_crash_shutdown(regs);
xen_reboot(SHUTDOWN_soft_reset);
}
but currently the libxl driver does not handle the soft reset
shutdown event. As a result, the guest domain never proceeds
past xen_reboot(), making it impossible for HVM domains to save
a crash dump using kexec.
This patch adds support for handling the soft reset event by
calling libxl_domain_soft_reset() and re-enabling domain death
events, which is similar to the xl tool handling of soft reset
shutdown event.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
There are too many goto labels in libxlDomainShutdownThread. Convert the
'destroy' and 'restart' labels to helper functions, leaving only the
commonly used pattern of 'endjob' and 'cleanup' labels.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
In libxlDomainShutdownThread, virObjectEventStateQueue is needlessly
called in the destroy and restart labels. The cleanup label aready
queues whatever event was created based on libxl_shutdown_reason.
There is no need to handle destroy and restart differently.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
When libxlDomainMigrationDstPrepare adds the @args to an
virNetSocketAddIOCallback using libxlMigrateDstReceive as
the target of the virNetSocketIOFunc @func with the knowledge
that the libxlMigrateDstReceive will virObjectUnref @args
at the end thus not needing to Unref during normal processing
for libxlDomainMigrationDstPrepare.
However, Coverity believes there's an issue with this. The
problem is there can be @nsocks virNetSocketAddIOCallback's
added, but only one virObjectUnref. That means the first
one done will Unref and the subsequent callers may not get
the @args (or @opaque) as they expected. If there's only
one socket returned from virNetSocketNewListenTCP, then sure
that works. However, if it returned more than one there's
going to be a problem.
To resolve this, since we start with 1 reference from the
virObjectNew for @args, we will add 1 reference for each
time @args is used for virNetSocketAddIOCallback. Then
since libxlDomainMigrationDstPrepare would be done with
@args, move it's virObjectUnref from the error: label to
the done: label (since error: falls through). That way
once the last IOCallback is done, then @args will be freed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
If available, use b_info->nested_hvm instead of
b_info->u.hvm.nested_hvm. This will make nested HVM config available
also for PVH domains.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Otherwise starting PVH guest will result in "arch_setup_bootlate:
mapping shared_info failed (pfn=..., rc=-1, errno: 12): Internal error".
After this change the behavior is the same as in `xl`.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Currently the libxl driver claims support for Xen >= 4.4, but
Xen 4.4 and 4.5 are no longer supported upstream. Let's increase
the minimum supported Xen version to 4.6 and change the defined
LIBXL_API_VERSION to 0x040500, which is the API version defined
when Xen 4.6 was released.
Since Xen 4.6 contains a pkgconfig file, drop the now unused code
that falls back to using LIBVIRT_CHECK_LIB in the absence of
pkgconfig file. In addition, bumping the LIBXL_API_VERSION
required adjusting the calls to libxl_set_vcpuaffinity to account
for the extra parameter in the 0x040500 version of the API.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is possible the incoming VM is not fully started when the finish
phase of migration is executed. In libxlDomainMigrationDstFinish,
wait for the thread receiving the VM to complete before executing
finish phase tasks.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The libxlDomainMigrationDst* functions are a bit flawed in their
handling of modify jobs. A job begins when the destination host
begins receiving the incoming VM and ends after the VM is started.
The finish phase contains another BeginJob/EndJob sequence.
This patch changes the logic to begin a job for the incoming VM
in the prepare phase and end the job in the finish phase.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The libxlDomainMigrationSrc* functions are a bit flawed in their
handling of modify jobs. A job begins at the start of the begin
phase but ends before the phase completes. No job is running for
the remaining phases of migration on the source host.
Change the logic to keep the job running after a successful begin
phase, and end the job in the confirm phase. The job must also end
in the perform phase in the case of error since confirm phase would
not be executed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
libxlDoMigrateSrcP2P() performs all phases of the migration
protocol for peer-to-peer migration. Unfortunately the logic
was a bit flawed since it is possible to skip the confirm
phase after a successfull begin and prepare phase. Fix the
logic to always call the confirm phase after a successful begin
and perform. Skip the confirm phase if begin or perform fail.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
If for any reason the restore of a VM fails on the destination host
in a migration operation, the VM is removed (if not persistent) from
the virDomainObjList, meaning it is no longer available for additional
cleanup or processing in the finish phase. Defer removing the VM from
the virDomainObjList until the finish phase, which already contains
logic to remove the VM.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
When libvirtd is started, initialize domain objects state with its real
state, not only RUNNING/SHUTOFF.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Currently, the functions return a pointer to the
destination buffer on success or NULL on failure.
Not only does this kind of error handling look quite
alien in the context of libvirt, where most functions
return zero on success and a negative int on failure,
but it's also somewhat pointless because unless there's
been a failure the returned pointer will be the same
one passed in by the user, thus offering no additional
value.
Change the functions so that they return an int
instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
And replace all calls with virObjectEventStateQueue such that:
libxlDomainEventQueue(driver, event);
becomes:
virObjectEventStateQueue(driver->domainEventState, event);
And remove NULL checking from all callers.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Per-domain log files were introduced in commit a30b08b717. The FILE
objects associated with these log files are stored in a hash table
using domid as a key. When a domain is shutdown, destroyed, or
otherwise powered-off, the FILE object is removed from the hash table,
where the free function will close the FILE.
Unfortunately the call to remove the FILE from the hash table occurs
after setting domid=-1 in the libxlDomainCleanup() function. The
object is never removed from the hash table, the free function is
never called, and the underlying fd is leaked. Fix by removing the
FILE object from the hash table before setting domid=-1.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When computing a baseline CPU for a specific hypervisor we have to make
sure to include only CPU features supported by the hypervisor. Otherwise
the computed CPU could not be used for starting a new domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This is required for virCPUBaseline to accept a list of guest CPU
definitions since they do not have arch set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
libxlDoDomainSave() is used in both the save and managedsave code
paths but was unconditionally setting hasManagedSave to true on
success. As a result, undefine would fail after a non-managed
save/restore operation. E.g.
virsh define; virsh start
virsh save; virsh restore
virsh shutdown
virsh undefine
error: Refusing to undefine while domain managed save image exists
Modify libxlDoDomainSave() to take an additional parameter to
specify managed vs non-managed save, and change callers to use it.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When adding a new object to the domain object list, there should
have been 2 virObjectRef calls made one for each list into which
the object was placed to match the 2 virObjectUnref calls that
would occur during Remove as part of virHashRemoveEntry when
virObjectFreeHashData is called when the element is removed from
the hash table as set up in virDomainObjListNew.
Some drivers (libxl, lxc, qemu, and vz) handled this inconsistency
by calling virObjectRef upon successful return from virDomainObjListAdd
in order to use virDomainObjEndAPI when done with the returned @vm.
While others (bhyve, openvz, test, and vmware) handled this via only
calling virObjectUnlock upon successful return from virDomainObjListAdd.
This patch will "unify" the approach to use virDomainObjEndAPI
for any @vm successfully returned from virDomainObjListAdd.
Because list removal is so tightly coupled with list addition,
this patch fixes the list removal algorithm to return the object
as entered - "locked and reffed". This way, the callers can then
decide how to uniformly handle add/remove success and failure.
This removes the onus on the caller to "specially handle" the
@vm during removal processing.
The Add/Remove logic allows for some logic simplification such
as in libxl where we can Remove the @vm directly rather than
needing to set a @remove_dom boolean and removing after the
libxlDomainObjEndJob completes as the @vm is locked/reffed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since the @dconn reference via args->conn will be used via a thread
or callback, let's make sure memory associated with it isn't free'd
unexpectedly before we use it. The Unref will be done when the object
is Dispose'd.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When adding the @vm to the @args for usage during a thread or
callback, let's add the reference to it at the time of adding to
ensure nothing else deletes it. The corresponding Unref is then
added to the Dispose function.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Rework the code such that virDomainObjListFindByID will always
return a locked/ref counted object so that the callers can
always do the same cleanup logic to call virDomainObjEndAPI.
Makes accessing the objects much more consistent.
NB:
There were 2 callers (lxcDomainLookupByID and qemuDomainLookupByID)
that were already using the ByID name, but not virDomainObjEndAPI -
these were changed as well in this update/patch.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Now that every caller is using virDomainObjListFindByUUIDRef,
let's just remove it and keep the name as virDomainObjListFindByUUID.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
So far we are repeating the following lines over and over:
if (!(virSomeObjectClass = virClassNew(virClassForObject(),
"virSomeObject",
sizeof(virSomeObject),
virSomeObjectDispose)))
return -1;
While this works, it is impossible to do some checking. Firstly,
the class name (the 2nd argument) doesn't match the name in the
code in all cases (the 3rd argument). Secondly, the current style
is needlessly verbose. This commit turns example into following:
if (!(VIR_CLASS_NEW(virSomeObject,
virClassForObject)))
return -1;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Convert CPU features policy into libxl cpuid policy settings. Use new
("libxl") syntax, which allow to enable/disable specific bits, using
host CPU as a base. For this reason, only "host-passthrough" mode is
accepted.
Libxl do not have distinction between "force" and "required" policy
(there is only "force") and also between "forbid" and "disable" (there
is only "disable"). So, merge them appropriately. If anything, "require"
and "forbid" should be enforced outside of specific driver.
Nested HVM (vmx and svm features) is handled separately, so exclude it
from translation.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce global libxl option for enabling nested HVM feature, similar
to kvm module parameter. This will prevent enabling experimental feature
by mere presence of <cpu mode='host-passthrough'> element in domain
config, unless explicitly enabled. <cpu mode='host-passthrough'> element
may be used to configure other features, like NUMA, or CPUID.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
When support for mode=custom will be added in the future, semantics of
current config will change. Reduce the surprise by emitting a warning.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Preparation for global nestedhvm configuration - libxlMakeDomBuildInfo
needs access to libxlDriverConfig.
No functional change.
Adjusting tests require slightly more mockup functions, because of
libxlDriverConfigNew() call.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
libxlDriverConfigNew() use libxlDriverConfigDispose() for cleanup in
case of errors. Do not call libxlLoggerFree() on not allocated logger
(NULL).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid the need for the drivers to explicitly check for a NULL path by
making sure it is at least the empty string.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ensuring that we don't call the virDrvConnectOpen method with a NULL URI
means that the drivers can drop various checks for NULL URIs. These were
not needed anymore since the probe functionality was split
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Declare what URI schemes a driver supports in its virConnectDriver
struct. This allows us to skip trying to open the driver entirely
if the URI scheme doesn't match.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a localOnly flag to the virConnectDriver struct which allows a
driver to indicate whether it is local-only, or permits remote
connections. Stateful drivers running inside libvirtd are generally
local only. This allows us to remote the check for uri->server != NULL
from most drivers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virDrvConnectOpen method is supposed to handle both
opening an explicit URI and auto-probing a driver if no URI is
given. Introduce a dedicated virDrvConnectURIProbe method to enable the
probing functionality to be split from the driver opening functionality.
It is still possible for NULL to be passed to the virDrvConnectOpen
method after this change, because the remote driver needs special
handling to enable probing of the URI against a remote libvirtd daemon.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we have used a bare xen:/// URI for connecting to the
legacy Xen driver. The new libxl Xen driver follows the new practice
of allowing '/system' as a path, as well as bare '/' for compat with
the old Xen driver.
This documents xen:///system as the preferred format for Xen, leaving
xen:/// as an undocumented feature just for back-compat.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All Xen PV and HVM with PV driver support a memory balloon device,
which cannot be disabled through the toolstack. Model the device
in the libxl driver, similar to the recently removed xend-based
driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Long ago in commit dfa1e1dd53 the scheduler weight was accidentally
hardcoded to 1000. Weight is a setting with no unit since it is
relative to the weight of other domains. If no weight is specified,
libxl defaults to 256.
Instead of hardcoding the weight to 1000, honor any <shares> specified
in <cputune>. libvirt's notion of shares is synonomous to libxl's
scheduler weight setting. If shares is unspecified, defer default
weight setting to libxl.
Removing the hardcoded weight required some test fixup. While at it,
add an explicit test for <shares> conversion to scheduler weight.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Inspired by commit ffb7954f to improve readability of the libxl
migration APIs.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In libxlDomainMigrationPrepare it is possible to dereference a NULL
libxlDomainObjPrivatePtr in early error paths. Check for a valid
'priv' before using it.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Similar to other uses of virDomainObjListAdd, on success add a ref to the
virDomainObj so that virDomainObjEndAPI can be called as usual.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If starting the domain fails in libxlDomainCreateXML, we mistakenly
jumped to cleanup without calling libxlDomainObjEndJob. Remove the
jump to 'cleanup'.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Most libxl driver API use the pattern of lock and add a ref to
virDomainObj, perform API, then decrement ref and unlock in
virDomainEndAPI. In some cases the API may call
virDomainObjListRemove, which unlocks the virDomainObj. Relock
the object in such cases so EndAPI is called with a locked object.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
libxlDomainMigrationPrepare adds the incoming domain def to the list
of domains via virDomainObjListAdd, but never adds its own ref to the
returned virDomainObj as other callers of virDomainObjListAdd do.
libxlDomainMigrationPrepareTunnel3 suffers the same discrepancy.
Change both to add a ref to the virDomainObj after a successful
virDomainObjListAdd, similar to other callers. This ensures a consistent
pattern throughout the drivers and allows using the virDomainObjEndAPI
function for cleanup.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For libxlDomainLookupByID and libxlDomainLookupByUUID let's
return a locked and referenced @vm object so that callers can
then use the common and more consistent virDomainObjEndAPI in
order to handle cleanup rather than needing to know that the
returned object is locked and calling virObjectUnlock.
The LookupByName already returns the ref counted and locked object,
so this will make things more consistent.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Commit id '9ac945078' altered libxlDomObjFromDomain to return
a locked *and* ref counted object for some specific purposes;
however, it neglected to alter all the consumers of the helper
to use virDomainObjEndAPI thus leaving many objects with extra
ref counts.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
libxlDomObjFromDomain to returns locked and ref counted virDomainObj but
libxlDomainMigratePerform3Params only unlocks the object on exit. Convert
it to use the virDomainObjEndAPI function for cleanup.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The libxlDomainMigrateConfirm3Params API locks and ref counts the associated
virDomainObj but relies on the helper function libxlDomainMigrationConfirm
to unlock the object. Unref'ing the object is not done in either function.
libxlDomainMigrationConfirm is also used by libxlDomainMigratePerform3Params
for p2p migration, but in that case the lock/ref and unref/unlock are
properly handled in the API entry point.
Remove the unlock from libxlDomainMigrationConfirm and adjust
libxlDomainMigrateConfirm3Params to properly unref/unlock the virDomainObj
on success and error paths.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The libxlDomainMigrateBegin3Params API locks and ref counts the associated
virDomainObj but relies on the helper function libxlDomainMigrationBegin
to unref/unlock the object. libxlDomainMigrationBegin is also used by
libxlDomainMigratePerform3Params for p2p migration, but in that case the
lock/ref and unref/unlock are properly handled in the API entry point. So
p2p migrations suffer a double unref/unlock in the Perform API.
Remove the unref/unlock (virDomainObjEndAPI) from libxlDomainMigrationBegin
and adjust libxlDomainMigrateBegin3Params to properly unref/unlock
the virDomainObj on success and error paths.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add typedef for the anonymous enum used for the driver features. This
allows the usage of the type in a switch statement and taking
advantage of the compilers feature to detect uncovered cases.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
libxl requires the memory sizes to be rounded to 1MiB increments.
Attempting to start a domain that violates this requirement will
fail with the marginally helpful error
2018-02-22 01:55:32.921+0000: xc: panic: xc_dom_boot.c:141: xc_dom_boot_mem_init: can't allocate low memory for domain: Out of memory
2018-02-22 01:55:32.921+0000: libxl: libxl_dom.c:671:libxl__build_dom: xc_dom_boot_mem_init failed: No such file or directory
Round the maximum and current memory values to the next 1MiB
increment when generating the libxl_domain_config object.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This flag is only used for tests. Let's instead overload bind syscall
in mocks where it is not done yet.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Range check in virPortAllocatorSetUsed is not useful anymore
when we manage ports for entire unsigned short range values.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Host tcp4/tcp6 ports is a global resource thus we need to make
port accounting also global or we have issues described in [1] when
port allocator ranges of different instances are overlapped (which
is by default for qemu for example).
Let's have only one global port allocator object that take care
of the entire ports range (0 - 65535) and introduce port range object
for clients to specify desired auto allocation band.
[1] https://www.redhat.com/archives/libvir-list/2017-December/msg00600.html
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
libxl supports setting the domain real time clock to local time or
UTC via the localtime field of libxl_domain_build_info. Adjustment
of the clock is also supported via the rtc_timeoffset field. The
libvirt libxl driver has never supported these settings, instead
relying on libxl's default of a UTC real time clock with adjustment
set to 0.
There is at least one user that would like the ability to change
the defaults
https://www.redhat.com/archives/libvirt-users/2018-February/msg00059.html
Add support for specifying a local time clock and for specifying an
adjustment for both local time and UTC clocks. Add a test case to
verify the XML to libxl_domain_config conversion.
Local time clock and clock adjustment is already supported by the
XML <-> xl.cfg converter. What is missing is an explicit test for
the conversion. There are plenty of existing tests that all use UTC
with 0 adjustment. Hijack test-fullvirt-tsc-timer to test a local
time clock with 1 hour adjustment.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cast away enum type for libxl scheduler constants since we don't want to
cover all of them and don't want build to break when new ones are added.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The controller model is slightly unusual in that the default value is
-1, not 0. As a result the default value is not covered by any of the
existing enum cases. This in turn means that any switch() statements
that think they have covered all cases, will in fact not match the
default value at all. In the qemuDomainDeviceCalculatePCIConnectFlags()
method this has caused a serious mistake where we fallthrough from the
SCSI controller case, to the VirtioSerial controller case, and from
the USB controller case to the IDE controller case.
By adding explicit enum constant starting at -1, we can ensure switches
remember to handle the default case.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently virt drivers will call directly into the network driver impl
to allocate domain interface devices where type=network. This introduces
a callback system to allow us to decouple the virt drivers from the
network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
During migration, the lock process is paused in the perform phase
but not resumed if there is a subsequent failure, leaving the locked
resource unprotected.
The perform phase itself can fail, in which case the lock process
should be resumed before returning from perform. The finish phase
could also fail on the destination host, in which case the migration
is canceled in the confirm phase and the VM is resumed. The lock
process needs to be resumed there as well.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
vif-* scripts support it for a long time, and expect addresses to be
separated by spaces. Add appropriate support to libxl driver.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This patch generates a NUMA distance-aware libxl description from the
information extracted from a NUMA distance-aware libvirt XML file.
By default, if no NUMA node distance information is supplied in the
libvirt XML file, this patch uses the distances 10 for local and 20
for remote nodes/sockets.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
There is no need to have two different enums where one has the same
values as the other one with some additions.
Currently for on_poweroff and on_reboot we allow only subset of actions
that are allowed for on_crash. This was covered in parse time using
two different enums. Now to make sure that we don't allow setting
actions that are not supported we need to check it while validating
domain config.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The "preferred" parameter is not used by any caller of cpuDecode
anymore. It's only used internally in cpu_x86 to implement cpuBaseline.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All APIs which expect a list of CPU models supported by hypervisors were
switched from char **models and int models to just accept a pointer to
virDomainCapsCPUModels object stored in domain capabilities. This avoids
the need to transform virDomainCapsCPUModelsPtr into a NULL-terminated
list of model names and also allows the various cpu driver APIs to
access additional details (such as its usability) about each CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
In 0d3d020ba6 I've added capability to accept MAC addresses
for the API too. However, the implementation was faulty. It needs
to lookup the corresponding interface in the domain definition
and pass the ifname instead of MAC address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Every caller reports the error themselves. Might as well move it
into the function and thus unify it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497410
The comment in virNetDevTapInterfaceStats() implementation for
Linux states that packets transmitted by domain are received by
the host and vice versa. Well, this is true but not for all types
of interfaces. For instance, for macvtaps when TAP device is
hooked right onto a physical device any packet that domain sends
looks also like a packet sent to the host. Therefore, we should
allow caller to chose if the stats returned should be straight
copy or swapped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In the past we updated host-model CPUs with host CPU data by adding a
model and features, but keeping the host-model mode. And since the CPU
model is not normally formatted for host-model CPU defs, we had to pass
the updateCPU flag to the formatting code to be able to properly output
updated host-model CPUs. Libvirt doesn't do this anymore, host-model
CPUs are turned into custom mode CPUs once updated with host CPU data
and thus there's no reason for keeping the hacks inside CPU XML
formatters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Add a new virStorageNetProtocol for Veritas HyperScale (VxHS) disks
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
The implementation of virConnectBaselineCPU may be different for each
hypervisor. Thus it shouldn't really be implmented in the cpu code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Suggested-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Using a variable named 'stat' clashes with the system function
'stat()' causing compiler warnings on some platforms:
libxl/libxl_driver.c: In function 'libxlDomainBlockStatsVBD':
libxl/libxl_driver.c:5387: error: declaration of 'stat' shadows a global declaration [-Wshadow]
/usr/include/sys/stat.h:455: error: shadowed declaration is here [-Wshadow]
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently, @port is type of string. Well, that's overkill and
waste of memory. Port is always an integer. Use it as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The HOST_NAME_MAX, INET_ADDRSTRLEN and VIR_LOOPBACK_IPV4_ADDR
constants are only used by a handful of files, so are better
kept in virsocketaddr.h or the source file that uses them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If a remote call fails during event registration (more than likely from
a network failure or remote libvirtd restart timed just right), then when
calling the virObjectEventStateDeregisterID we don't want to call the
registered @freecb function because that breaks our contract that we
would only call it after succesfully returning. If the @freecb routine
were called, it could result in a double free from properly coded
applications that free their opaque data on failure to register, as seen
in the following details:
Program terminated with signal 6, Aborted.
#0 0x00007fc45cba15d7 in raise
#1 0x00007fc45cba2cc8 in abort
#2 0x00007fc45cbe12f7 in __libc_message
#3 0x00007fc45cbe86d3 in _int_free
#4 0x00007fc45d8d292c in PyDict_Fini
#5 0x00007fc45d94f46a in Py_Finalize
#6 0x00007fc45d960735 in Py_Main
#7 0x00007fc45cb8daf5 in __libc_start_main
#8 0x0000000000400721 in _start
The double dereference of 'pyobj_cbData' is triggered in the following way:
(1) libvirt_virConnectDomainEventRegisterAny is invoked.
(2) the event is successfully added to the event callback list
(virDomainEventStateRegisterClient in
remoteConnectDomainEventRegisterAny returns 1 which means ok).
(3) when function remoteConnectDomainEventRegisterAny is hit,
network connection disconnected coincidently (or libvirtd is
restarted) in the context of function 'call' then the connection
is lost and the function 'call' failed, the branch
virObjectEventStateDeregisterID is therefore taken.
(4) 'pyobj_conn' is dereferenced the 1st time in
libvirt_virConnectDomainEventFreeFunc.
(5) 'pyobj_cbData' (refered to pyobj_conn) is dereferenced the
2nd time in libvirt_virConnectDomainEventRegisterAny.
(6) the double free error is triggered.
Resolve this by adding a @doFreeCb boolean in order to avoid calling the
freeCb in virObjectEventStateDeregisterID for any remote call failure in
a remoteConnect*EventRegister* API. For remoteConnect*EventDeregister* calls,
the passed value would be true indicating they should run the freecb if it
exists; whereas, it's false for the remote call failure path.
Patch based on the investigation and initial patch posted by
fangying <fangying1@huawei.com>.
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
virDomainXMLOption gains driver specific callbacks for parsing and
formatting save cookies.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Attempting to start a domain with USB hostdevs but no USB controllers
fails with the rather cryptic error
libxl: error: libxl_qmp.c:287:qmp_handle_error_response: received an
error message from QMP server: Bus 'xenusb-0.0' not found
This can be fixed by creating default USB controllers. When no USB
controllers are defined, create the number of 8 port controllers
necessary to accommodate the number of defined USB devices.
Note that USB controllers are already created as needed in the
domainAttachDevice code path. E.g. a USB controller will be created,
if necessary, when attaching a USB device with
'virsh attach-device dom usbdev.xml'.
If a VNC listen address is not specified in domXML, libxl
will default to 127.0.0.1, but this is never reflected in the domXML.
In the case of spice, a missing listen address resulted in listening
on all interfaces, i.e. '0.0.0.0'. If not specified, set the listen
address in virDomainGraphicsDef struct to the libxl default when
creating the frame buffer device. Additionally, set default spice
listen address to 127.0.0.1.
When running on a NUMA machine, populate the sibling node
and distance information using data supplied by Xen.
With locality distances information, under Xen, new host
capabilities would like:
<topology>
<cells num='4'>
<cell id='0'>
<memory unit='KiB'>263902380</memory>
<distances>
<sibling id='0' value='10'/>
<sibling id='1' value='21'/>
</distances>
...
</cell>
...
</cells>
...
</topology>
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Xen feature nestedhvm is the option on Xen 4.4+ which enables
nested virtualization when mode host-passthrough is applied.
nested HVM is enabled by adding below on the target domain;
<cpu mode='host-passthrough'/>
Virtualization on target domain can be disabled by specifying
such under feature policy rule on target name;
[On Intel (VT-x) architecture]
<feature policy='disable' name='vmx'/>
or:
[On AMD (AMD-V) architecture]
<feature policy='disable' name='svm'/>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
So far our code is full of the following pattern:
dom = virGetDomain(conn, name, uuid)
if (dom)
dom->id = 42;
There is no reasong why it couldn't be just:
dom = virGetDomain(conn, name, uuid, id);
After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The CPU driver provides APIs to create and free virCPUDataPtr. Thus all
APIs exported from the driver should work with that rather than
requiring the caller to pass a pointer to an internal part of the
structure.
In other words
virCPUx86DataAddCPUID(cpudata, &cpuid)
is much better than the original
virCPUx86DataAddCPUID(&cpudata->data.x86, &cpuid)
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The new API is called virCPUDataFree. Individual CPU drivers are no
longer required to implement their own freeing function unless they need
to free architecture specific data from virCPUData.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The libxl code was checking that a 'char *' was != '\0', instead
of checking the first element in the string
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As discussed here [0][1] Coverity reported two issues:
- On libxlDomainMigrationPrepareTunnel3 @@mig will be leaked on failures
after sucessfull call libxlDomainMigrationPrepareAny hence we free it.
Setting mig = NULL after @mig is assigned plus adding libxlMigrationCookieFree
on error paths addresses the issue. In case virThreadCreate fails,
unref of args frees the cookie on dispose function (libxlMigrationDstArgsDispose)
- On libxlMigrationStartTunnel @tc would be leaked.
Fixed by correctly saving the newly allocated @tc onto @tnl such that
libxlMigrationStopTunnel would free it up.
[0] https://www.redhat.com/archives/libvir-list/2017-February/msg00791.html
[1] https://www.redhat.com/archives/libvir-list/2017-February/msg00833.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Commit 4ab0c959 fixed a memory leak in libxlDriverGetDom0MaxmemConf
but introduced a potential double free of mem_tokens
*** Error in `/usr/sbin/libvirtd': double free or corruption (out):
0x00007fffc808cfd0 ***
Avoid double free by setting mem_tokens to NULL after calling
virStringListFree.
Tunnelled migration doesn't require any extra network connections
beside the libvirt daemon. It's capable of strong encryption and the
default option of openstack-nova.
This patch adds the tunnelled migration(Tunnel3params) support to
libxl. On the source side, the data flow is:
* libxlDoMigrateSend() -> pipe libxlTunnel3MigrationFunc() polls pipe
* out and then write to dest stream.
While on the destination side:
* Stream -> pipe -> 'recvfd of libxlDomainStartRestore'
The usage is the same as p2p migration, execpt adding one extra
'--tunnelled' to the libvirt p2p migration command.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The newly introduced function libxlDomainMigrationPrepareAny
will be shared between P2P and tunnelled variations.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
If either the "if (STRPREFIX(mem_tokens[j], "max:"))" is never entered
or the "if (virStrToLong_ull(mem_tokens[j] + 4, &p, 10, maxmem) < 0)" break
is hit, control goes back to the outer loop processing 'cmd_tokens' and
it's possible that the 'mem_tokens' would be overwritten.
Found by Coverity
When the libxl driver is initialized, it creates a virDomainDef
object for dom0 and adds it to the list of domains. Total memory
for dom0 was being set from the max_memkb field of libxl_dominfo
struct retrieved from libxl, but this field can be set to
LIBXL_MEMKB_DEFAULT (~0ULL) if dom0 maximum memory has not been
explicitly set by the user.
This patch adds some simple parsing of the Xen commandline,
looking for a dom0_mem parameter that also specifies a 'max' value.
If not specified, dom0 maximum memory is effectively all physical
host memory.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl driver reports different values of maximum memory depending
on state of a domain. If inactive, maximum memory value is reported
correctly. When active, maximum memory is derived from max_pages value
returned by the XEN_SYSCTL_getdomaininfolist sysctl operation. But
max_pages can be changed by toolstacks and does not necessarily
represent the maximum memory a domain can use during its active
lifetime.
A better location for determining a domain's maximum memory is the
/local/domain/<id>/memory/static-max node in xenstore. This value
is set from the libxl_domain_build_info.max_memkb field when creating
the domain. Currently it cannot be changed nor can its value be
exceeded by a balloon operation. From libvirt's perspective, always
reporting maximum memory with virDomainDefGetMemoryTotal() will produce
the same results as reading the static-max node in xenstore.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When a user does not explicitly set a <driver> in the disk config,
libvirt defers selection of a default to libxl. This approach works
fine when starting a domain with such configuration or attaching a
disk to a running domain. But when detaching such a disk, libxl
will fail with "unrecognized disk backend type: 0". libxl makes no
attempt to recalculate a default backend (driver) on detach and
simply fails when uninitialized.
This patch updates the libvirt disk config with the backend selected
by libxl when starting a domain or attaching a disk to a running
domain. Another benefit of this approach is that the live XML is
also updated with the backend driver selected by libxl.
When starting a domian, a libxl_domain_config object is created from
virDomainDef. Any virDomainDiskDef devices with a format of
VIR_STORAGE_FILE_NONE are mapped to LIBXL_DISK_FORMAT_RAW in the
corresponding libxl_disk_device, but the virDomainDiskDef format is
never updated to reflect the change.
A better place to set a default format for disk devices is the
device post-parse callback, ensuring the virDomainDiskDef object
reflects the default format.
The typical pattern when calling libxl functions that populate a
structure is
libxl_foo foo;
libxl_foo_init(&foo);
libxl_get_foo(ctx, &foo);
...
libxl_foo_dispose(&foo);
Fix several instances of libxl_physinfo missing the init and
dispose calls.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxlGetAutoballoonConf is supposed to honor user-specified
autoballoon setting in libxl.conf. As written, the user-specified
setting could be overwritten by the subsequent logic to check
dom0_mem parameter. If user-specified setting is present and
correct, accept it. Only fallback to checking Xen dom0_mem
command line parameter if user-specfied setting is not present.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
xen.git commit 57f8b13c changed several of the libxl memory
get/set functions to take 64 bit parameters. The libvirt
libxl driver still uses uint32_t variables for these various
parameters, which is particularly problematic for the
libxl_set_memory_target() function.
When dom0 autoballooning is enabled, libvirt (like xl) determines
the memory needed to start a domain and the memory available. If
memory available is less than memory needed, dom0 is ballooned
down by passing a negative value to libxl_set_memory_target()
'target_memkb' parameter. Prior to xen.git commit 57f8b13c,
'target_memkb' was an int32_t. Subtracting a larger uint32 from
a smaller uint32 and assigning it to int32 resulted in a negative
number. After commit 57f8b13c, the same subtraction is widened
to a int64, resulting in a large positive number. The simple
fix taken by this patch is to assign the difference of the
uint32 values to a temporary int32 variable, which is then
passed to 'target_memkb' parameter of libxl_set_memory_target().
Note that it is undesirable to change libvirt to use 64 bit
variables since it requires setting LIBXL_API_VERSION to 0x040800.
Currently libvirt supports LIBXL_API_VERSION >= 0x040400,
essentially Xen >= 4.4.
The current logic around configuring timers in libxl based on
virDomainDef object is a bit brain dead. Unsupported timers are
silently ignored and tsc is only recognized if it is the first
timer specified.
Change the logic to reject unsupported timers and honor the tsc
timer regardless of its order when multiple timers are specified.
For HVM domains, pae is only set in libxl_domain_build_info when
explicitly specified in the hypervisor <features> config. This is
fine for i686 machines, but is incorrect behavior for x86_64 machines
where pae must always be enabled. See the following discussion for
additional details
https://www.redhat.com/archives/libvir-list/2017-January/msg00254.html
libxl doesn't provide a way to write one log for each domain. Thus
we need to demux the messages. If our logger doesn't know to which
domain to attribute a message, then it will write it to the default
log file.
Starting with Xen 4.9 (commit f9858025 and following), libxl will
write the domain ID in an easy to grab manner. The logger introduced
by this commit will use it to demux the libxl log messages.
Thanks to the default log file, this logger will also work with older
versions of Xen.
libvirt libxl picks its own default with respect to the default NIC
to use. libxlMakeNic is the one responsible for this and on boot it
picks LIBXL_NIC_TYPE_VIF_IOEMU for HVM domains such that it accomodates
both PV and emulated one. The good behaving guest at boot will then
select the pv and unplug the emulated device.
Now, on HVM when attaching an interface it will pick the same default
that is LIBXL_NIC_TYPE_VIF_IOEMU which as a result will fail the attach
(see xen commit 32e9d0f ("libxl: nic type defaults to vif in hotplug for
hvm guest"). Xen doesn't yet support the hotplug of emulated devices,
but we don't want to rule out that case either, which might get support
in the future. Hence we simply reverse the defaults when we are
attaching the interface which allows libvirt to prefer the PV nic first
without adding "model='netfront'" following the same pattern as above
commit. Also to avoid ruling out the emulated one we set to
LIBXL_NIC_TYPE_IOEMU when setting a model type that is not 'netfront'.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In preparation to the code move to virnetdevtap.c, this change:
* renames virNetInterfaceStats to virNetDevTapInterfaceStats
* changes 'path' to 'ifname', to use the same vocable as other
method in virnetdevtap.c.
* Add the attributes checker
New line character in name of domain is now forbidden because it
mess virsh output and can be confusing for users.
Validation of name is done in drivers, after parsing XML to avoid
problems with dissappeared domains which was already created with
new-line char in name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Although the migration port is immediately released in the
finish phase of migration, it was never set in the domain
private object when allocated in the prepare phase. So
libxlDomainMigrationFinish() always released a 0-initialized
migrationPort, leaking any allocated port. After enough
migrations to exhaust the migration port pool, migration would
fail with
error: internal error: Unable to find an unused port in range
'migration' (49152-49216)
Fix it by setting libxlDomainObjPrivate->migrationPort to the
port allocated in the prepare phase. While at it, also fix
leaking an allocated port if the prepare phase fails.
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modeled after the qemuDomainHostdevPrivatePtr (commit id '27726d8c'),
create a privateData pointer in the _virDomainChardevDef to allow storage
of private data for a hypervisor in order to at least temporarily store
secret data for usage during qemuBuildCommandLine.
NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the secret data, there's no need to add code
code to handle this new structure there.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Due to a copy and paste error, the scheduler 'cap' parameter
was over-writing the 'weight' parameter when preparing the
return parameters in libxlDomainGetSchedulerParametersFlags.
As a result, the scheduler weight was never shown when getting
schedinfo and setting the weight failed as well
virsh schedinfo testvm
Scheduler : credit
cap : 0
virsh schedinfo testvm --cap 50 --weight 500
Scheduler : credit
error: invalid scheduler option: weight
The obvious fix is to assign the 'caps' parameter to the correct
item in the parameter list.
Reported-by: Volo M. <vm@vovs.net>
And allow libxl to handle channel element which creates a Xen
console visible to the guest as a low-bandwitdh communication
channel. If type is PTY we also fetch the tty after boot using
libxl_channel_getinfo to fetch the tty path. On socket case,
we autogenerate a path if not specified in the XML. Path autogenerated
is slightly different from qemu driver: qemu stores also on
"channels/target" but it creates then a directory per domain with
each channel target name. libxl doesn't appear to have a clear
definition of private files associated with each domain, so for
simplicity we do it slightly different. On qemu each autogenerated
channel goes like:
channels/target/<domain-name>/<target name>
Whereas for libxl:
channels/target/<domain-name>-<target name>
Should note that if path is not specified it won't persist,
existing only on live XML, unless user had initially specified it.
Since support for libxl channels only came on Xen >= 4.5 we therefore
need to conditionally compile it with LIBXL_HAVE_DEVICE_CHANNEL.
After this patch and having a qemu guest agent:
$ cat domain.xml | grep -a1 channel | head -n 5 | tail -n 4
<channel type='unix'>
<source mode='bind' path='/tmp/channel'/>
<target type='xen' name='org.qemu.guest_agent.0'/>
</channel>
$ virsh create domain.xml
$ echo '{"execute":"guest-network-get-interfaces"}' | socat
stdio,ignoreeof unix-connect:/tmp/channel
{"execute":"guest-network-get-interfaces"}
{"return": [{"name": "lo", "ip-addresses": [{"ip-address-type": "ipv4",
"ip-address": "127.0.0.1", "prefix": 8}, {"ip-address-type": "ipv6",
"ip-address": "::1", "prefix": 128}], "hardware-address":
"00:00:00:00:00:00"}, {"name": "eth0", "ip-addresses":
[{"ip-address-type": "ipv4", "ip-address": "10.100.0.6", "prefix": 24},
{"ip-address-type": "ipv6", "ip-address": "fe80::216:3eff:fe40:88eb",
"prefix": 64}], "hardware-address": "00:16:3e:40:88:eb"}, {"name":
"sit0"}]}
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxl events are delivered to libvirt via the libxlDomainEventHandler
callback registered with libxl. Documenation in
$xensrc/tools/libxl/libxl_event.h states that the callback "may occur
on any thread in which the application calls libxl". This can result
in deadlock since many of the libvirt callees of libxl hold a lock on
the virDomainObj they are working on. When the callback is invoked, it
attempts to find a virDomainObj corresponding to the domain ID provided
by libxl. Searching the domain obj list results in locking each obj
before checking if it is active, and its ID equals the requested ID.
Deadlock is possible when attempting to lock an obj that is already
locked further up the call stack. Indeed, Max Ustermann reported an
instance of this deadlock
https://www.redhat.com/archives/libvir-list/2015-November/msg00130.html
Guido Rossmueller also recently stumbled across it
https://www.redhat.com/archives/libvir-list/2016-September/msg00287.html
Fix the deadlock by moving the lookup of virDomainObj to the
libxlDomainShutdownThread. After this patch, libxl events are
enqueued on the libvirt side and processed by dedicated thread,
avoiding the described deadlock.
Reported-by: Max Ustermann <ustermann78@web.de>
Reported-by: Guido Rossmueller <Guido.Rossmueller@gdata.de>
Just like virDomainDefPostParseCallback has gained new
parseOpaque argument, we need to follow the logic with
virDomainDeviceDefPostParse.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some callers might want to pass yet another pointer to opaque
data to post parse callbacks. The driver generic one is not
enough because two threads executing post parse callback might
want to see different data (e.g. domain object pointer that
domain def belongs to).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If passing an empty usbdevice_list to libxl, qemu will always get an
-usb parameter for HVM guests with only non-USB input devices. This
causes qemu to crash when passing pvusb device on HVM guests.
The solution is to allocate the list only when an item to put in it
is found.
Both cpuCompare* APIs are renamed to virCPUCompare*. And they should now
work for any guest CPU definition, i.e., even for host-passthrough
(trivial) and host-model CPUs. The implementation in x86 driver is
enhanced to provide a hint about -noTSX Broadwell and Haswell models
when appropriate.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
By default, virt-manager (and likely other libvirt-based apps) sets
the VIR_MIGRATE_PERSIST_DEST flag when invoking the migrate API, which
fails in a Xen setup since the libxl driver does not support the flag.
Persisting a domain is a trivial task in the grand scheme of migration,
so be nice to libvirt apps and add support for VIR_MIGRATE_PERSIST_DEST
in the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Akin to previous commit but for "virsh cpu-baseline" which
computes a baseline CPU for a set of host cpu elements.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Implement support for "virsh cpu-compare" so that we can calculate
common cpu element between a pool of hosts, which had a requirement
of providing host cpu description.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Parse libxl_hwcap accounting for versions since Xen 4.4 - Xen 4.7.
libxl_hwcaps is a set of cpuid leaves output that is described in [0] or
[1] in Xen 4.7. This is a collection of CPUID leaves that we version
in libvirt whenever feature words are reordered or added. Thus we keep the
common ones in one struct and others for each version. Since
libxl_hwcaps doesn't appear to have a stable format across all supported
versions thus we need to keep track of changes as a compromise until it's
exported in xen libxl API. We don't fail in initializing the driver in case
parsing of hwcaps failed for that reason. In addition, change the notation
on PAE feature such that is easier to read which bit it corresponds.
[0] xen/include/asm-x86/cpufeature.h
[1] xen/include/public/arch-x86/cpufeatureset.h
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Add support for describing cpu topology in host cpu element. In doing
so, refactor hwcaps part to its own helper namely libxlCapsInitCPU to
handle all host cpu related operations, including topology.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The code for replacing domain's transient definition with the persistent
one is repeated in several places and we'll need to add one more. Let's
make a nice helper for it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Add support for multi serial devices, after this patch virsh can be used to
connect different serial devices of running domains. E.g.
vish # console <xxx> --devname serial<xxx>
Note:
This depends on a xen/libxl bug fix to have libxl_console_get_tty(...) correctly
returning the tty path (as opposed to always returning the first one).
[0] https://lists.xen.org/archives/html/xen-devel/2016-08/msg00438.html
Signed-off-by: Bob Liu <bob.liu@oracle.com>
libxl only has API to address the host USB devices by bus/device.
Find the bus/device if the user only provided the vendor/product
of the USB device.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl driver has long supported migration V3 but has never
indicated so in the connectSupportsFeature API. As a result, apps
such as virt-manager that use the more generic virDomainMigrate API
fail with
libvirtError: this function is not supported by the connection driver:
virDomainMigrate
Add VIR_DRV_FEATURE_MIGRATION_V3 to the list of features marked as
supported in the connectSupportsFeature API.
Because of change in caaa1bd357 this macro is no under
#ifdef block. That means it needs to be re-intended correctly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit eee7bd4e introduced two functions: libxlDiskPathToID and
libxlDiskSectorSize.
However, as they're used only by code under #ifdef __linux__,
on non-Linux platforms it results in errors similar to this:
CC libxl/libvirt_driver_libxl_impl_la-libxl_driver.lo
libxl/libxl_driver.c:5263:1: error: unused function 'libxlDiskPathToID' [-Werror,-Wunused-function]
libxlDiskPathToID(const char *virtpath)
^
libxl/libxl_driver.c:5312:1: error: unused function 'libxlDiskSectorSize' [-Werror,-Wunused-function]
libxlDiskSectorSize(int domid, int devno)
^
2 errors generated.
Fix that by moving these functions under the #ifdef __linux__ block.
In the cleanup path, @vm cannot be possibly NULL. If it were so,
we would receive SIGSEGV much earlier. At the beginning of the
function we do libxlDomainObjBeginJob(.., vm, ..); and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Long, long ago before libxl_get_required_shadow_memory() was
made publicly available, its code was copied to the libxl driver
for calculating shadow memory requirements of HVM domains.
Long ago, libxl_get_required_shadow_memory() was exported in
libxl_utils.h and included in xen-devel packages everywhere.
Remove the copied code, which has become stale, and let libxl
provode a proper shadow memory value.
Commit id '44304c6eb' added the API libxlDomainAttachControllerDevice
inside a conditional LIBXL_HAVE_PVUSB, but called that function outside
the conditional in libxlDomainAttachDeviceLive.
Similarly, the API libxlDomainDetachControllerDevice was added inside a
conditional LIBXL_HAVE_PVUSB, but called outside the conditional in
libxlDomainDetachDeviceLive.
This patch adds the conditional LIBXL_HAVE_PVUSB around those two calls
from within the switch.
In case of error, libxlReconnectDomain may call
virDomainObjListRemoveLocked. However it has no local reference on
the domain object, leading to segfault. Get a reference to the domain
object at the start of the function and release it at the end to avoid
problems.
This commit also factorizes code between the error and normal ends.
When hotplugging a USB device, check if there is an available controller
and port, if not, automatically create a USB controller of version
2.0 and 8 ports.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Support USB controller hot-plug and hot-unplug.
#virsh attach-device dom usbctrl.xml
#virsh detach-device dom usbctrl.xml
usbctrl.xml example:
<controller type='usb' index='0' model='qusb2'>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
To support USB Controller in xen guest domains, just add
USB controller in domain config xml as following:
<controller type='usb' model='qusb2' ports='4'/>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Introduce initial support for domainBlockStats API call that
allow us to query block device statistics. OpenStack nova
uses this API call to query block statistics, alongside
virDomainMemoryStats and virDomainInterfaceStats. Note that
this patch only introduces it for VBD for starters. QDisk
would come in a separate patch series.
A new statistics data structure is introduced to fit common
statistics among others specific to the underlying block
backends. For the VBD statistics on linux these are exported
via sysfs on the path:
"/sys/bus/xen-backend/devices/vbd-<domid>-<devid>/statistics"
To calculate the block devno libxlDiskPathToID is introduced.
Each backend implements its own function to extract statistics,
allowing support for multiple backends and different platforms.
VBD stats are exposed in reqs and number of sectors from
blkback, and it's up to us to convert it to sector sizes.
The sector size is gathered through xenstore in the device
backend entry "physical-sector-size".
BlockStatsFlags variant is also implemented which has the
added benefit of getting the number of flush requests.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Allow to store driver specific data on a per-vcpu basis.
Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.
Libxl is the last user and I don't have the toolchain prepared to
compile the libxl driver. Move it to the libxl driver to avoid having to
refactor the code.
Move the enum into a new src/util/virsecret.h, rename it to be
virSecretLookupType. Add a src/util/virsecret.h in order to perform
a couple of simple operations on the secret XML and virSecretLookupTypeDef
for clearing and copying.
This includes quite a bit of collateral damage, but the goal is to remove
the "virStorage*" and replace with the virSecretLookupType so that it's
easier to to add new lookups that aren't necessarily storage pool related.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When domXML contains only <console type='pty'> and no corresponding
<serial>, the console is "stolen" [1] and used as the first <serial>
device. When this "stolen" console is accessed from the libxl driver
(in libxlConsoleCallback and libxlDomainOpenConsole), check if the
targetType is VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL, and use the
"stolen" device in def->serials[0] instead. Prior to this change,
creating a domain with input XML containing only a <console> device
and subsequently attempting to access its console with
'virsh console' would fail
error: internal error: character device <null> is not using a PTY
[1] See comments associated with virDomainDefAddConsoleCompat() in
$LIBVIRT-SRC/src/conf/domain_conf.c:
Commit 2a58ed0b added support for creating guests with USB
hostdevs. Commit fc21d10 later added support for hotplut of
USB hostdevs. Advertise support for USB hostdevs in the
domcapabilities.
In addition add the appropriate caps for USB support on
domaincapstest when libvirt is built on a Xen with
LIBXL_HAVE_PVUSB. Otherwise domaincapstest would fail i.e.
testing the wrong domain capabilities.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Support hot attach/detach a USB host device to guest.
Currently libxl only supports xen PV guest, and only
supports specifying USB host device by 'bus number'
and 'device number', for example:
usb.xml:
<hostdev mode='subsystem' type='usb' managed='no'>
<source>
<address bus='1' device='3'/>
</source>
</hostdev>
#xl attach-device dom usb.xml
#xl detach-device dom usb.xml
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Support creating guest with USB host device in config file.
Currently libxl only supports xen PV guest, and only supports
specifying USB host device by 'bus number' and 'device number',
for example:
<hostdev mode='subsystem' type='usb' managed='no'>
<source>
<address bus='1' device='3'/>
</source>
</hostdev>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Populate libxl_domain_build_info struct with bios and firmware
info from virDomainLoaderDef.
Note: Currently libxl only allows specifying the type of BIOS.
For type LIBXL_BIOS_TYPE_OVMF, the firmware path is configured
when building Xen using '--with-system-ovmf='. If not specified,
LIBXL_FIRMWARE_DIR/ovmf.bin is used. In the future, Xen will
support a user-specified firmware path. See
http://lists.xenproject.org/archives/html/xen-devel/2016-03/msg01628.html
Once that work is merged into xen.git, the libvirt libxl driver
will be able to honor a user-specified path. In the meantime use
the implicit path, which is tolerable since it is advertised in
domcapabilities.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Prefer firmwares specified via --with-loader-nvram configure
option. If none are specified, use the Xen-provided default
firmwares found in LIBXL_FIRMWARE_DIR.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In libxl driver we do virObjectRef in libxlDomainObjBeginJob,
If virCondWaitUntil failed, it goes to error, do virObjectUnref,
There's a chance that someone undefine the vm at the same time,
and refs unref to zero, vm is freed in libxlDomainObjBeginJob.
But the vm outside function is not Null, we do virObjectUnlock(vm).
That's how we overwrite the vm memory after it's freed. I fix it.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Similarly to the domain definition validator add a device validator. The
change to the prototype of the domain validator is necessary as
virDomainDeviceInfoIterateInternal requires a non-const pointer.
Until now we weren't able to add checks that would reject configuration
once accepted by the parser. This patch adds a new callback and
infrastructure to add such checks. In this patch all the places where
rejecting a now-invalid configuration wouldn't be a good idea are marked
with a new parser flag.
Remove the live attribute and mark the definition as transient
whether the domain is runing or not.
There were only two callers left calling with live=false:
* testDomainStartState, where the domain already is active
because we assigned vm->def->id just a few lines above the call
* virDomainObjGetPersistentDef, which now only calls
virDomainObjSetDefTransient for an active domain
Add .domainInterfaceAddresses so that user can have a way to
get domain interface address by 'virsh domifaddr'. Currently
it only supports '--source lease'.
Signed-off: Chunyan Liu <cyliu@suse.com>
Xen only supports network-based disks with the qemu (aka qdisk) driver.
Set the driverName to 'qemu' in libxlDomainDeviceDefPostParse() if
not already set. When starting a domain with network-based disks,
ensure the driverName is 'qemu'.
Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=981094
Commit id 'f9edcfa4' added cookie manipulation for libxl; however, some
cookie crumb cleanup was missed. Found by Coverity.
In libxlDomainMigrationBegin, the cookie is allocated and baked; however,
the mig ingredients weren't cleaned up.
In libxlDomainMigrationPrepare, when the 'mig' cookie is added to the
args, set the 'mig = NULL'; otherwise, other failure paths between when
the code ate the cookie data and when it was added to args would fail
to clean up the crumbs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than returning a "char *" indicating perhaps some sized set of
characters that is NUL terminated, alter the function to return 0 or -1
for success/failure and add two parameters to handle returning the
buffer and it's size.
The function no longer encodes the returned secret, rather it returns
the unencoded secret forcing callers to make the necessary adjustments.
Alter the callers to handle the adjusted model.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Call the internal driver callbacks rather than the public APIs to avoid
calling unnecessarily the error dispatching code and don't overwrite
the error messages provided by the APIs. They are good enough to
describe which secret is missing either by UUID or the usage (basically
name).
