We need to enable or disable the modular daemons with systemd after the
RPM install/uninstall.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The patterns for enabling/disabling daemons post/postun-install has a
bit of duplication across the different part of the spec, due to the
number of socket units involved. This is going to get much worse with
the need to enable/disalbe modular daemons, so benefits from macroization.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The daemons all need restarting to ensure they pick up the newly
installed code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we restart libvirtd if the nwfilter/network configs have
changed. We need to take account of possibility that the modular
daemons are in use instead though.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The patterns for restarting daemons post-transaction has a bit of
duplication across the different part of the spec. This is going to
get much worse with the need to restart modular daemons, so benefits
from macroization.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Starting with QEMU 6.0, this controller is enabled by default
on aarch64.
https://bugzilla.redhat.com/show_bug.cgi?id=1967187
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
lcitool now uses the term "target" instead of "host" to refer to
the various operating systems it supports, and we need to adapt
our helper script so that it works with the new command line
interface.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When we try to migrate vm, we check if it contains only devices
that are able to migrate. If a hostdev device is not able to
migrate we raise an error with <hostdev/>, but it can actually be
<interface/>, so we need to check if hostdev device was created
by us from interface and show the right error message.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1942315
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to test the virDomainGetMessages for test driver, we need to
check some taints or deprecations, so introduce testDomainObjCheckTaint
for checking taints.
As we introduced testDomainObjCheckTaint for test driver, the `dominfo`
command in virshtest will now print tainting messages, so add them for
test.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The test driver and qemu driver could share the same code in
virDomainGetMessages(), so extract it to a function.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The current docker:dind container has broken default seccomp filter that
results in clone3 being blocked, which in turn breaks Fedora 35 rawhide.
This custom image has a workaround that causes the seccomp filter to
return ENOSYS for clone3 instad of EPERM, thus triggering glibc to
fallback to clone correctly.
Reviewed-by: Erik Skultety <eskultet@redhat>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It was added by commit c2121602 and later removed by 5a4c2374a
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The package is mistakenly obsoleting itself, when it should be
obsoleting the -static packages we dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In virTestMain() the @failedTests bitmap is allocated and
optionally @testBitmap too. But neither of them is freed.
Fixes: 0cd5a726e3
Fixes: cebb468ef5
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Add a disclaimer that filing a feature request issue has no guarantees
that anybody will actually implement the feature.
Based on the disclaimer in the QEMU project.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When loop in function virNVMeDeviceListCreateReAttachList() there may be
reused index @i, this patch fix this by using a new @j.
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since we use git to manage RPM applied patches, we need to disable both
meson's -Werror config knob and libvirt's equivalent.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the previous commit we've added a sentence into NEWS.rst that
supposedly contains doubled word. Well, it doesn't really.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
We need to pass the 'trim' requests through the copy-on-read filter so
if a user configures a discard policy on the disk the requests get
through to the appropriate format layer in the blockdev tree.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1986509
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Commit 12967c3e13 incorrectly made the target optional.
The validation was re-introduced by commit e8863b91f (which
put it into FSDefValidate instead of the parser), but
it did not amend the schema to make it mandatory again.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: e8863b91fb
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The nature of Fedora rawhide means that it will inevitably have failures
periodically. Currently it is failing to even update packages due to
glibc switching to use of clone3 syscall, which is mistakenly blocked by
seccomp in container runtimes using EPERM instead of ENOSYS.
When we fail to build the rawhide containers, it is quite likely that we
still have the previous build available in the gitlab registry, so it is
reasonable to allow the container job to fail and try the build job
anyway.
Ideally we would ignore the container build failure if-and-only-if the
previous container was build with the same list of packages. We don't
record the original dependency package list though, so that's not
currently possible.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This function add halt polling time interface in domstats. So that
we can use command 'virsh domstats VM' to get the data if system
support.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add helper function virHostCPUGetHaltPollTime to obtain halt polling
time. If the kernel support halt polling time statistic, and mount
debugfs. This function will take effect on KVM VMs.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use function virFileReadValueUllongQuiet to read unsigned long
long value without error report.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed the test being skipped in my build scenario (tmpfs) and
the output doesn't make it clear why it's happening.
Add debug statements for the various return values of
testUserXattrEnabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that 'blockdev-reopen' will be stable in the upcoming qemu versions
we can finally enable incremental backups.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Base it on the presence of the "blockdev-reopen" QMP command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Export 'qemuBlockReopenFormatMon' and use it in a new test case wich
will validate the arguments against the QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This function was added prior 'blockdev-reopen' being stable and qemu
changed the arguments to actually contain an array of block node
definitions to reopen.
In our case we are just changing between read-only and read-write modes
and thus we can keep operating on the nodes one-by-one.
Modify the code to add the wrapper array.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This will simplify testing of the blockdev-reopen code once it's
enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Update to v6.1.0-rc0-48-g7b7ca8ebde
Notable changes are:
- stabilization of 'blockdev-reopen'
- addition of the 'vmx-tsc-scaling' cpu flag
- Supported display types are now in the schema only if they are compiled in.
- rbd image encryption
- 'aio-max-batch' iothread property
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Similar to what was done for qemu_firmware.c in 61d95a1073, don't
report an error for unknown vhost-user features, just log it and
correctly continue on
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Additional cleanup paths add the possibility of not freeing earlier
stuff. Add an AUTOPTR handler for qemuDomainObjPrivate and use it in
qemuDomainObjPrivateAlloc
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
