Introduced in 4.3.0 by xen commit:
commit ef496b81f0336f09968a318e7f81151dd4f5a0cc
libxl: postpone backend name resolution
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since its introduction in
commit 907a39e735
Add a test suite for validating SELinux labelling
this function did not return NULL on OOM.
Since we abort on OOM now, switch testSELinuxMungePath to void,
return NULL explicitly on XML parsing failure and remove
the (now pointless) cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of listing the sites that surely support HTTPS,
list the ones that don't.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Any active domain has a copy in the privateData, filled in
qemuProcessInit.
Move the qemu capability check below the activeness check and remove
the extra lookup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Apparently, some of '&*variable' slipped in. Drop '&*' and access
the variable directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
We require the header and the secret to be present.
Use a different approach to virParams to report an error if they
are not present, instead of trying to pass empty arguments to QEMU
via QMP.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already exit if they are not present.
Report an error, but do not mark them as required in case a future
version of this command will want to accept a different set of
parameters.
https://bugzilla.redhat.com/show_bug.cgi?id=2046024
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove pointless 'ret', cmd variable reuse and use g_auto.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto, split the double use of 'cmd' variable and remove useless
ret variable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate the two uses of 'cmd' to avoid mixing manual and automatic
cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reduce the scope of the variable to avoid renaming it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic cleanup and remove the 'ret' variable in favor of
direct returns.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In domain_cgroup.c there's VIR_GET_LIMIT_PARAMETER macro which
has a semicolon at the end of its declaration. Well, remove it so
that the places where macro is used have to put the semicolon
explicitly. This helps with automatic reformatting (at least in
vim).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
using virCHProcessSetupPid
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Enable support of VIR_DRV_FEATURE_TYPED_PARAM_STRING to enable numatune
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The chDomObjFromDomain() function which currently lives as a
static one in ch_driver.c is going to be needed in other parts
of the driver. Move it into ch_domain.c, rename to
virCHDomainObjFromDomain() and expose in corresponding header
file for the rest of the driver to use.
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Refactor some cgroup management methods from qemu into hypervisor.
These methods will be shared with ch driver for cgroup management.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reporting hv-* properties properly requires hv to be enabled,
see qemu commit 071ce4b03b.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A <hostdev/> can have <address type='unassigned'/> which means
libvirt manages the device detach from/reattach to the host but
the device is never exposed to the guest. This means that we have
to take a shortcut during hotunplug (e.g. never ask QEMU on the
monitor to detach the device, or never wait for DEVICE_DELETED
event).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A <hostdev/> can have <address type='unassigned'/> which means
libvirt manages the device detach from/reattach to the host but
the device is never exposed to the guest. This means that we have
to take a shortcut during hotplug, similar to the one we are
taking when constructing the command line (see
qemuBuildHostdevCommandLine()).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2040548
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We document that <address type='unassigned'/> can be used only
for <hostdev/>-s. However, corresponding validation rule is
missing. Let's put the rule into hypervisor agnostic part of
validation process so that all drivers can benefit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the user has already provided us with the configuration they
want, there's no point in trying to come up with a reasonable
OS-specific default.
Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Or that neither is. The current implementation, where if only
one of the two is provided the other one will be based on
OS-specific defaults is more likely to cause confusion than it
is to be helpful.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU might not be installed on the build system, in which case
the user and group will not be present. We should avoid falling
back to root:root in that case, and assume the user and group
are going to be present in the target system instead.
Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It might be part of some non-mandatory package on certain
distros, and our logic deals just fine with its contents not
being available.
Fixes: 4c69d64efa
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Unfortunately, udev doesn't set ID_TYPE attribute for NVMe disks,
therefore we have to add another case into udevKludgeStorageType()
to treat /dev/nvme* devlinks as any other disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2045953
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The udevKludgeStorageType() function looks at devlink name
(/dev/XXX) and guesses the type of the (storage) device using a
series of STRPREFIX() calls. Well those can be turn into an array
and a for() loop, especially if we are about to add a new case
(in the next commit).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are a some scenarios in which we want to prealloc guest
memory (e.g. when requested in domain XML, when using hugepages,
etc.). With 'regular' <memory/> models (like 'dimm', 'nvdimm' or
'virtio-pmem') or regular guest memory it is corresponding
memory-backend-* object that ends up with .prealloc attribute
set. And that's desired because neither of those devices can
change its size on the fly. However, with virtio-mem model things
are a bit different. While one can set .prealloc attribute on
corresponding memory-backend-* object it doesn't make much sense,
because virtio-mem can inflate/deflate on the fly, i.e. change
how big of a portion of the memory-backend-* object is exposed to
the guest. For instance, from a say 4GiB module only a half can
be exposed to the guest. Therefore, it doesn't make much sense to
preallocate whole 4GiB and keep them allocated. But we still want
the part exposed to the guest preallocated (when conditions
described at the beginning are met).
Having said that, with new enough QEMU the virtio-mem-pci device
gained new attribute ".prealloc" which instructs the device to
talk to the memory backend object and allocate only the requested
portion of memory.
Now, that our algorithm for setting .prealloc was isolated in a
single function, the function can be called when constructing cmd
line for virtio-mem-pci device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new capability tracks whether virtio-mem device is capable
of memory preallocation, which is detected by the device having
.prealloc attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuBuildMemoryGetPagesize() function has everything is needs
to decide whether preallocation is needed or not. Move the logic
from qemuBuildMemoryBackendProps() into
qemuBuildMemoryGetPagesize().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuBuildMemoryBackendProps() function is already long
enough. Move code that decides what hugepages to use into a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @mem agrument of qemuBuildMemoryDeviceProps() function is
only read from. Make this fact obvious from the function
declaration too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
autotools used to produce those, but meson doesn't.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, virDomainClockDef is formatted inside
virDomainDefFormatInternalSetRootName() which is already long
enough. Move the code into a new function
(virDomainClockDefFormat()) and make the code use
virXMLFormatElement() while at it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function never returns an error, make it void then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement() to simplify virDomainTimerDefFormat().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @mode member of the _virDomainTimerDef struct stores
values of the virDomainTimerModeType enum, or -1 for the
default value (when user provided no value in XML).
This is needlessly complicated. Introduce new value to the enum
which reflects the default state.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @track member of the _virDomainTimerDef struct stores
values of the virDomainTimerTrackType enum, or -1 for the
default value (when user provided no value in XML).
This is needlessly complicated. Introduce new value to the enum
which reflects the default state.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @tickpolicy member of the _virDomainTimerDef struct stores
values of the virDomainTimerTickpolicyType enum, or -1 for the
default value (when user provided no value in XML).
This is needlessly complicated. Introduce new value to the enum
which reflects the default state.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the _virDomainTimerDef structure we have @present member which
is like virTristateBool, except it's an integer and has values
shifted by one. This is harder to read. Retype the member to
virTristateBool which we are familiar with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function never returns an error, make it void then. And
while at it, make the @src argument const to make it obvious it's
never changed inside the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller of this function
(qemuProcessFindCharDevicePTYsMonitor()) doesn't pass NULL.
Remove corresponding check from virDomainChrSourceDefCopy().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of virDomainChrSourceDefCopy() is to make a deep copy of
given virDomainChrSourceDef. However, some types were not copied
at all (VIR_DOMAIN_CHR_TYPE_SPICEVMC and
VIR_DOMAIN_CHR_TYPE_SPICEPORT) and some members weren't copied
either (@logfile, @logappend).
After this, there are still some members that are not copied
(seclabels and private data), but the sole caller
qemuProcessFindCharDevicePTYsMonitor() doesn't seem to care.
Therefore, just document this behavior so that future user is
aware.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is some code that validates whether parsed @bus <input/>
makes sense (e.g. some hypervisors have their own type of bus).
But this code should not live in the parser, but validator
rather. That way, we can also validate that the value we compute
(if user didn't provide any) is valid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
