The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a syntax-check script that validates header files use a
common layout:
/*
...copyright header...
*/
<one blank line>
#ifndef SYMBOL
# define SYMBOL
....content....
#endif /* SYMBOL */
For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:
#ifndef SYMBOL_ALLOW
# error ....
#endif /* SYMBOL_ALLOW */
<one blank line>
The many mistakes this script identifies are then fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rename a variable to make it clear that it holds the client organization
rather than the server organization.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virt-pki-validate tool is extracting components in the x509
certificate Subject field. Unfortunately the regex it is is using is far
too strict, and so truncating valid data. It needs to consider ',' as a
field separator, and if that's not there take all data until the EOL.
With the broken regex:
$ echo " Subject: O=Test,CN=guestHyp1ver" | sed 's+.*CN=\(.[a-zA-Z \._-]*\).*+\1+'
guestHyp
And with the fixed regex
$ echo "Subject: O=Test,CN=guestHyp1ver" | sed 's+.*CN=\([^,]*\).*+\1+'
guestHyp1ver
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since commit v4.3.0-336-gc84726fbdd all
{hypervisor-,}cpu-{baseline,compare} commands use a generic
vshExtractCPUDefXMLs helper for extracting individual CPU definitions
from the provided input file. The helper wraps the input file in a
<container> element so that several independent elements can be easily
parsed from the file. This works fine except when the file starts with
XML declaration (<?xml version="1.0" ... ?>) because the XML declaration
cannot be put inside any element. In fact it has to be at the very
beginning of the XML document without any preceding white space
characters. We can just simply skip the XML declaration.
https://bugzilla.redhat.com/show_bug.cgi?id=1592737
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a command to allow for setting various dynamic IOThread polling
interval scope (poll-max-ns, poll-grow, and poll-shrink). Describe
the values in the virsh.pod in as generic terms as possible. The
more specific QEMU algorithm has been divulged in the previous patch.
Based heavily on code originally posted by Pavel Hrdina
<phrdina@redhat.com>, but altered to only provide one command
and to not managed a poll disabled state.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add an --iothread qualifier to domstats and an explanation in
the man page. Describe the values in as generic terms as possible
allowing each hypervisor to provide a specific algorithm to utilize
the values as it sees fit.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces a new shutdown reason "daemon" in order
to indicate that the daemon needed to force shutdown the domain
as the best course of action to take at the moment.
This action would occur during reconnection when processing
encounters an error once the monitor reconnection is successful.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 4f4c3b13 (v3.3) fixed an issue where performing cleanup of
libvirt objects could sometimes lose error messages, by adding code
to copy the libvirt error into last_error prior to cleanup paths.
However, it caused a regression: on other paths, some errors are now
printed twice, if libvirt still remembers in its thread-local
storage that an error was set even after virsh cleared last_error.
For example:
$ virsh -c test:///default snapshot-delete test blah
error: Domain snapshot not found: no domain snapshot with matching name 'blah'
error: Domain snapshot not found: no domain snapshot with matching name 'blah'
Fix things by telling libvirt to discard any thread-local errors at
the same time virsh prints an error message (whether or not the libvirt
error is the same as what is stored in last_error).
Update the virsh-undefine testsuite (partially reverting portions of
commit b620bdee, by removing -q, to more easily pinpoint which commands
are causing which messages), now that there is only one error message
instead of two.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For non-Linux platforms we have
virHostValidateCGroupControllers() stub which only reports an
error. But we are not marking the ignored arguments the way we
should.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This removes code duplication and simplifies cgroup detection.
As a drawback we will not have separate messages to enable cgroup
controller in kernel or to mount it. On the other side the rewrite
adds support for cgroup v2.
The kernel config support was wrong because it was parsing
'/proc/self/cgroup' instead of '/proc/cgroups/' file.
The mount suggestion is removed as well because it will not work
with cgroup v2.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The domxml-to-native virsh command accepts either --xml or --domain
option followed by a file or domain name respectively. The --domain
option is documented as required, which means an argument with no option
is treated as --xml. Commit v4.3.0-127-gd86531daf2 broke this by making
--domain optional and thus an argument with no option was treated as
--domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1633077
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We're passing size_t but using format for unsigned long.
Introduced in latest vshTable rework patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Local lengthy unicode-unreliable table formatting was replaced by new
API. Great example of how new API saves space and time.
Removed a lot of string lenght calculation used by the local table.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Local lengthy unicode-unreliable table formatting was replaced by new
API. Great example of how new API saves space and time.
Removed a lot of string lenght canculation used by the local table.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
I've moved all the printing from cmdDomblkinfoPrint() to cmdDomblkinfo(),
and renamed the cmdDomblkinfoPrint() to cmdDomblkinfoGet(), since nature of
that function changed from gathering and printing informations only to
gathering information. This I believe simplifies the functions and
makes the implementation of vshTable API simpler.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1630164
The domiflist command is designed to show a brief information on
domain interfaces. One piece of information that is shows is
"Source" - source network, device, name, bridge. However, it's
ignoring vhostuser for which we can show the unix socket it's
associated with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
In 2e97450425 we've mistakenly removed gettext macro for
translating static strings. This results in table header being
printed in English regardless of user locale.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The helper function virshSnapshotCreate (formerly vshSnapshotCreate)
has had dead variables since commit a00c37f2 (Sep 2011).
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1609454
Add some cautionary words related to the create and delete
NWFilter Binding use cases and possible issues that may result
to the virsh nwfilter-binding-{create|delete} descriptions
and the virNWFilterBinding{CreateXML|Delete) API descriptions.
Essentially summarizing commit 2d9318b6c without using the
shoot yourself in the foot wording.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of printing it straight in virsh, it creates table struct
which is filled with header and rows(domains). It allows us to know
more about table before printing to calculate alignment right.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
It solves problems with alignment of columns. Width of each column
is calculated by its biggest cell. Should solve unicode bug.
In future, it may be implemented in virsh, virt-admin...
This API has 5 public functions:
- vshTableNew - adds new table and defines its header
- vshTableRowAppend - appends new row (for same number of columns as in
header)
- vshTablePrintToStdout
- vshTablePrintToString
- vshTableFree
https://bugzilla.redhat.com/show_bug.cgi?id=1574624https://bugzilla.redhat.com/show_bug.cgi?id=1584630
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1615680
Commit id d45bee449 updated the pool-define-as qualifier descriptions
to add some new fields, but neglected to modify the command item list
in order to add those fields as well.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit b3d9b08ef7.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 5d40272ea6.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are few places where dlopen() is called. This call means we
have to link with DLOPEN_LIBS. However, instead of having each
final, installable library linking with it, move the directive to
the source that introduced the dependency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
While local builds succeed fine, a build worker building in a chroot
environment is encountering errors when linking some items in tools/nss
and tests, e.g.
[ 469s] libtool: link: gcc -shared -fPIC -DPIC -Wl,--whole-archive nss/.libs/libnss_libvirt_impl.a -Wl,--no-whole-archive -lpthread -lutil -ltirpc -fstack-protector-strong -grecord-gcc-switches -O2 -fstack-protector-strong -g -Wl,--version-script=./nss/libvirt_nss.syms -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,--no-copy-dt-needed-entries -Wl,-z -Wl,defs -grecord-gcc-switches -O2 -fstack-protector-strong -g -pthread -Wl,-soname -Wl,libnss_libvirt.so.2 -o nss/.libs/libnss_libvirt.so.2
[ 469s] nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virjsoncompat.o): In function `virJSONJanssonOnce':
[ 469s] /home/abuild/rpmbuild/BUILD/libvirt-4.6.0/src/util/virjsoncompat.c:63: undefined reference to `dlopen'
[ 469s] /home/abuild/rpmbuild/BUILD/libvirt-4.6.0/src/util/virjsoncompat.c:79: undefined reference to `dlsym'
...
A similar problem was fixed in commit b018ada3 and inspires this fix.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introducing the pool as a noop. Integration inside the build
system. Implementation will be in the following commits.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add --alias to support custom alias in virsh attach-interface.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add --alias to support custom disk alias in virsh attach-disk.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1601377
Fix typo from commit id d45bee449 for the parent_wwpn field
resulting in parent_wwnn being printed twice.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1600330
Add nwfilterbinding schema in virt-xml-validate for autoprobing.
Add document of nwfilterbinding schema in tools/virt-xml-validate.pod.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU commit bf1e7140e adds reporting of new balloon statistic to QEMU
2.12. Value represents the amount of memory that can be quickly
reclaimed without additional I/O. Let's add that too.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
After you go through command mentioned above, completer
finds what state the device is currently in, and suggests
an opposite state.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Functions virshSecretEventNameCompleter, virshPoolEventNameCompleter,
virshNodedevEventNameCompleter allocates only enough space
for array of N strings.
However these are null terminated strings, so program needs to
alloc space for array of N + 1 strings.
How to replicate error: valgrind virsh, use completer for
'nodedev-event --event' or 'pool-event --event' or
'secret-event --event'.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Adding sata bus address support to the optional address parameter of virsh
attach-disk. The address is used as controller.bus.unit. e.g.
sata:0.0.0
Signed-off-by: Han Han <hhan@redhat.com>
Adding usb bus address support to the optional address parameter
of virsh attach-disk. The address is used as bus:port. e.g. usb:1:1.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In [1], <type> are described as "on_poweroff", "on_reboot",
"on_crash". but we accept "poweroff", "reboot" and "crash".
This patch adds documentation for them.
[1]: https://libvirt.org/formatdomain.html#elementsEvents
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces --all to show all block devices info
of guests like:
virsh # domblkinfo w08 --all
Target Capacity Allocation Physical
---------------------------------------------------
hda 42949672960 9878110208 9878110208
vda 10737418240 10736439296 10737418240
Target Capacity Allocation Physical
---------------------------------------------------
hda 40.000 GiB 9.200 GiB 9.200 GiB
vda 10.000 GiB 9.999 GiB 10.000 GiB
For inactive domains using networked storage, a "-" will
be printed instead of the value since it's not possible
to determine the value without the storage connection.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This new switch can be used to set
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag for stats
fetching API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This command is a virsh wrapper for virConnectBaselineHypervisorCPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This command is a virsh wrapper for virConnectCompareHypervisorCPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
The domain capabilities XML contains host CPU model tailored to a
specific hypervisor and since it's enclosed in <mode name='host-model'>
element rather then the required <cpu> it's impossible to directly use
the host CPU model as an input to, e.g., cpu-compare command. To make
this more convenient, vshExtractCPUDefXML now accepts full domain
capabilities XML and automatically transforms the host CPU models into
the form accepted by libvirt APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both cpu-compare and cpu-baseline commands accept more that just CPU
definition XML(s). For users' convenience they are able to extract the
CPU definition(s) even from domain XML or capabilities XML. The main
differences between the two commands is in the number of CPU definitions
they expect: cpu-compare wants only one CPU definition while
cpu-baseline expects one or more CPUs.
The extracted code forms a new vshExtractCPUDefXML function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to cpu-models these two commands do not operate on a domain
and should be listed in the "Host and Hypervisor" commands section.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The next patch will use it in virsh-completer.c for returning the name
list of nodedev events.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The next patch will use it in virsh-completer.c for returning the name
list of pool events.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The next patch will use it in virsh-completer.c for returning the
strings of domain event name. At the same time, rename it to
avoid possible name clashing.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The next patch will use it in virsh-completer.c for returning the name
list of secret events.
The patch code originally authored by Michal Privoznik, Please refer to
https://www.redhat.com/archives/libvir-list/2018-May/msg01022.html
I splitted it to 2 patches with tiny change.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These two functions were duplicating some cleanup paths, so let's just merge
both cleanup and error paths together. To distinguish whether we need to
clean-up the return value let's keep it in @tmp until the function is successful
in which case we set @ret to the value of @tmp and set @tmp to NULL.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than have virJSONValueArraySize return a -1 when the input
is not an array and then splat an error message, let's check for
an array before calling and then change the return to be a size_t
instead of ssize_t.
That means using the helper virJSONValueIsArray as well as using a
more generic error message such as "Malformed <something> array".
In some cases we can remove stack variables and when we cannot,
those variables should be size_t not ssize_t. Alter a few references
of if (!value) to be if (value == 0) instead as well.
Some callers can already assume an array is being worked on based
on the previous call, so there's less to do.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the VSH_OT_ARGV options don't support complete, But some of
VSH_OT_ARGV options are gonna support complete in upcoming patches.
Once applied the upcoming completion patches for VSH_OT_ARGV options, If
we don't ignore VSH_OT_ARGV here, The vshReadlineOptionsGenerator will
be called, Hence complete output will consist of the result by command
completer + the result by option completer, It's confusing.
e.g.
$ virsh domstats --domain <TAB><TAB>
--backing --interface --list-paused --perf --vcpu
--balloon leap42.3 --list-persistent --raw win10
--block --list-active --list-running sles12sp3
--cpu-total --list-inactive --list-shutoff sles15
--enforce --list-other --list-transient --state
After this patch and the upcoming completion patches:
$ virsh domstats --domain <TAB><TAB>
leap42.3 sles12sp3 sles15 win10
Signed-off-by: Lin Ma <lma@suse.com>
It's helpful for users while they type certain kind of VSH_OT_ARGV options.
e.g.
$ virsh domstats --domain sles12sp3 --d<TAB>
Signed-off-by: Lin Ma <lma@suse.com>
The first entry in the returned array is the substitution for TEXT. It
causes unnecessary output if other commands or options share the same
prefix, e.g.
$ virsh des<TAB><TAB>
des desc destroy
or
$ virsh domblklist --d<TAB><TAB>
--d --details --domain
This patch fixes the above issue.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
centralize the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
to avoid unnecessary duplicated definition
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If another event in background while running libvirt-guests.sh
completely undefines a guest it will no more be available for proper
reporting of its shutdown.
This appears in the log as:
Failed to determint state of guest: <UUID>. Not tracking it anymore
Shutdown of guest complete
The first message already reports that we are giving up on the guest
(per UUID which is all we have left at that point). To avoid the message
with an empty guest_name in such a case lets check what guest_name
returned and only print a report on valid content.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Dariusz Gadomski <dariusz.gadomski@canonical.com>
The recent fix to libvirt-guests.sh.in works for what it intended to fix
(variable scope) but failed to adapt the loop in check_guests_shutdown
correctly. Due to that it currently might detect all guests as "Failed to
determine state of guest" by bad var content or just assumes they are shut
down by picking up an empty variable.
This commit fixes loop to use the passed value and the call in the loop
to actually use the variable assigned in the iterated.
Fixes: 7e476356 "tools: fix variable scope in in check_guests_shutdown"
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1764668
Reviewed-by: Dariusz Gadomski <dariusz.gadomski@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Historically we have relied on autopoint/gettextize to install a
standard po/Makefile.in.in. There is very limited scope for customizing
this and it also causes a bunch of extra stuff to be pulled into
configure.ac which potentially clashes with gnulib. Writing make rules
for po file management is no more difficult than any other rules libvirt
has, so stop using autopoint/gettextize.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1529256
If one of the virStorageVolLookupBy{Key|Name|Path} succeeds and
we have a @vol, then clear the last libvirt error; otherwise, a
subsequent "other" failure may cause vshReportError to erroneously
report the wrong error as well as a reported 'vshError' error that
caused the failure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Historically we have used a bare lxc:/// URI for connecting to LXC. This
is different from our practice with QEMU, UML, Parallels, Libxl, BHyve
and VirtualBox drivers, which all use a path of '/system' or '/session'
or both.
By making LXC allow '/system', we have fully standardized on the use of
either '/system' or '/session' for all the stateful drivers that run
inside libvirtd.
Support for lxc:/// is of course maintained for back-compat.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we have used a bare xen:/// URI for connecting to the
legacy Xen driver. The new libxl Xen driver follows the new practice
of allowing '/system' as a path, as well as bare '/' for compat with
the old Xen driver.
This documents xen:///system as the preferred format for Xen, leaving
xen:/// as an undocumented feature just for back-compat.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
libvirt-guests.sh when run with more active guests than requested to
shut down in parallel will run until it times out only shutting down
the first set of guests.
This patch fixes parallel shutdown by fixing a variable scope issue
where check_guests_shutdown unintentionally reset $guests which
prevented further progress.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1688508
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Instead of appearing as one long paragraph, split the output to list
each command option on its own line for better readability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-path volume pool', or
'virsh vol-name volume pool', or 'virsh vol-key volume'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-info volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-dumpxml volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-wipe volume pool algorithm'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-download volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-upload volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-delete volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-clone source-vol target-vol pool'.
While making the modification clean up the description a bit too in
order to help clarify under what circumstances the source-vol could be
found if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Clean up the formatting to make the output a bit more readable at
least with respect to not having one paragraph of output. Each
option will start on its own line.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We can use:
domifaddr f26-cloud --source arp
to get the address.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability to provide the adapter parent_wwnn and parent_wwpn
or the parent_fabric_wwn on the virsh command line for the pool
define/create as commands. Update the virsh.pod description.
Signed-off-by: John Ferlan <jferlan@redhat.com>
One short sentence won't do it justice, but it could help by listing
scsi_hostN and vHBA to point one in the right direction.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The description was missing the wwnn and wwpn names for the
--adapter-wwnn and --adapter-wwpn switches. Just add it to be
clear that the fields cannot be empty (IOW they are not boolean).
Signed-off-by: John Ferlan <jferlan@redhat.com>
so it's not affected by flags that might be passed in $(*_LIBS) like
-L/usr/lib which might result in linking against system library and
requiring incorrect version of private symbols
Signed-off-by: Jan Palus <atler@pld-linux.org>
Currently if cmd->skipChecks is set (done only from completers)
some basic checks are skipped because we're working over
partially parsed command. See a26ff63ae4 for more detailed
explanation. Anyway, the referenced commit was too aggressive in
disabling checks and effectively returned success even in clear
case of failure. For instance:
# domif-getlink --interface <TAB><TAB>
causes virshDomainInterfaceCompleter() to be called, which calls
virshDomainGetXML() which eventually calls
vshCommandOptStringReq(.., name = "domain"); The --domain
argument is required for the command and if not present -1 should
be returned to tell the caller the argument was not found. Well,
zero is returned meaning the argument was not found but it's not
required either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The commands which requires a pool to perform any action for a volume is
throwing a segfault when you pass the volume name before a pool name or
without the argument '--pool'.
An example that works:
virsh # vol-list loops-pool
Name Path
-------------------------------------------------------------------
loop0 /mnt/loop0
virsh # vol-info --pool loops-pool lo<TAB>
An example that does not work:
virsh # vol-list loops-pool
Name Path
-------------------------------------------------------------------
loop0 /mnt/loop0
virsh # vol-info lo<TAB>
Segmentation Fault
The example 'vol-info' can be executed as 'vol-info loop0 --pool
loops-pool'. So, this commit fixes this problem when the arguments are
inverted and avoids the segfault.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While libvirt-guests.sh is running cases can let guest_is_on fail which
causes check_guests_shutdown to print output.
That output shall not spill into the users of function
check_guests_shutdown which is therefore now returning values in a
variable like guest_is_on already did.
Original-Author: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Modified-By: Jorge Niedbalski <niedbalski@ubuntu.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Cast away enum type in places where we don't wish to cover all cases.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.
The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Similarly to other commands add an argument which allows to check the
XML which would be used to execute the operation instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Undefined symbols are a bad thing in general because they can get
resolved in unexpected ways at runtime if multiple sources provide the
same symbol name. For example both glibc and libtirpc may provide XDR
symbols and we want to ensure that we resolve to libtirpc if that's what
we originally built against.
The toolchain maintainers thus strongly recommend that all applications
use the '-z defs' linker flag to prevent undefined symbols. This is
shortly becoming part of the default linker flags for RPMs. As an added
benefit this aligns Linux builds with Windows builds, where the linker
has never permitted undefined symbols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when the script validates the PKI files and
the certificate 'Subject:' field contains RDNs after
the Common Name (CN), these values are also included,
creating a false result that the CN is not correct.
A small change to the sed regex fixes this issue, by
extracting only the value for CN and nothing else. The
regex is replaced with the exact same regex used to
extract the CN value from the client certificate.
"ln" will not replace an existing symlink, so if you run 'make install'
twice, the second time will get an error:
ln: failed to create symbolic link 'virsh': File exists
We must always remove the symlink target first.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The bash-completion project documents that only those scripts
from $BASH_COMPLETIONS_DIR that share name with the current
command for which <TAB> was hit are loaded [1]. This means, that
vsh script we have there is not loaded. We have to create
symlinks for virsh and virt-admin.
At the same time, we have to create new RPM package because
virt-admin and client packages are independent. That means we
cannot place the vsh script in either of them. What we can do is
to have a different package that contains the completion script
and then virt-admin and client packages contain only the symlink
and require the bash-completion package.
1: https://github.com/scop/bash-completion#faq
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Only a small subset of VIR_CONNECT_LIST_DOMAINS_* flags are
actually used for this completer. Remove the unused ones. Note
that this is unrelated to other commands using
VIR_CONNECT_LIST_DOMAINS_* (i.e. cmdList) as this commit targets
the completer only and nothing else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately, we have a number of aliases in virsh and even though
these are not visible any more, we have to support them. The problem is
that when trying to print help for the alias, we get SIGSEGV because
there isn't any @def structure anymore and we need to query the command
being aliased instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1538570
Signed-off-by: Erik Skultety <eskultet@redhat.com>
These helpers are called from a single place only - cmdHelp wrapper and
just before the wrapper invokes the helpers, it performs the search,
either for command group or for the command itself, except the result is
discarded and the helper therefore needs to do it again. Drop this
inefficient handling and pass the @def structure rather than a name,
thus preventing the helper from needing to perform the search again.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This is a slight change from previous patches since virSecret
does not have a name only UUID strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The virConnectListAllNWFilters() has no extra flags yet, which
simplifies things a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Yet again, we don't need listing by device capabilities, so flags
are unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This one is a bit simpler since virStoragePoolListAllVolumes()
has no flags yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The functions defined in these sources are referenced all over
the place, however, compiler only when building with readline.
Thus when building without it linker gets sad as it can't find
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When building without readline, this function does nothing but
return false. Without touching any of its arguments which
triggers a build error. Therefore, provide a stub that has
arguments marked as unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The current state of art is as follows:
1) vshReadlineOptionsGenerator() generate all possible --options
for given command, and then
2) vshReadlineOptionsPrune() clears out already provided ones
from the list.
Not only this brings needless memory complexity it is also not
trivial to get right. We can switch to easier approach: just
don't add already specified --options in the first step.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For given domain fetch list of defined interfaces. This can be
used for commands like domif-getlink and others. If available,
the interface name is returned (e.g. "vnet0", usually available
only for running domains), if not the MAC address is returned.
Moreover, the detach-interface command requires only MAC address
and therefore we have new flag that forces the completer to
return just the MAC address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared let the fun begin. This
completer is very simple and returns domain names. Moreover,
depending on the command it can return just a subset of domains
(e.g. only running/paused/transient/.. ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The only purpose of this file is to be sourced. After that one
can use completion even for their bash:
# virsh list --<TAB><TAB>
--all --inactive ...
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This command is going to be called from bash completion script in
the following form:
virsh complete -- start --domain
Its only purpose is to return list of possible strings for
completion. Note that this is a 'hidden', unlisted command and
therefore there's no documentation to it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to the previous commit, once we've presented an
--option for a command to the user it makes no sense to offer it
again. Therefore, we can prune all already specified options. For
instance, after this patch:
virsh # migrate --verbose <TAB><TAB>
will no longer offer --verbose option.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of having completers prune returned string list based on
user's input we can do that right after the callback is called.
Only strings matching the prefix will be presented to the user
then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared we can call options'
completer again. At the same time, pass partially parsed input to
the completer callback - it will help the callbacks to narrow
down the list of returned options based on user's input. For
instance, if the completer is supposed to return list of
interfaces depending on user input it may return just those
interfaces defined for already specified domain. Of course,
completers might ignore this parameter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the future, completer callbacks will receive partially parsed
command (and thus possibly incomplete). However, we still want
them to use command options fetching APIs we already have (e.g.
vshCommandOpt*()) and at the same time don't report any errors
(nor call any asserts).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It's better to fetch list of either commands or options just once
and then iterate over it. Moreover, it makes future completers
way simpler as they will return string lists too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When returning a string that needs escaping there are two
scenarios that can happen. Firstly, user already started the
string with a quote (or double quote) in which case we don't need
to do anything - readline takes care of that. However, if they
haven't typed anything yet, we need to escape the string
ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a way of retrieving partly parsed command we
don't need duplicate code that parses the user's input.
Yes, this code removes call of opt's completer, but:
a) current implementation is broken anyway, and
b) it will be added back shortly
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the future, this function is going to be called from
vshReadlineParse() to provide parsed input for completer
callbacks. The idea is to allow the callbacks to provide more
specific data. For instance, for the following input:
virsh # domifaddr --domain fedora --interface <TAB><TAB>
the --interface completer callback is going to be called. Now, it
is more user friendly if the completer offers only those
interfaces found in 'fedora' domain. But in order to do that it
needs to be able to retrieve partially parsed result.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When parsing cmd line which has "--" on it, this is leaked.
Problem is, parser->getNextArg() allocates new string and stores
it into tkdata. But as soon as "--" is detected 'continue' is
issued without any free of the allocated memory.
==5304== 3 bytes in 1 blocks are definitely lost in loss record 1 of 782
==5304== at 0x4C2AF50: malloc (vg_replace_malloc.c:299)
==5304== by 0x8BB5AA9: strdup (strdup.c:42)
==5304== by 0x55842CA: virStrdup (virstring.c:941)
==5304== by 0x172B21: _vshStrdup (vsh.c:162)
==5304== by 0x175E8E: vshCommandArgvGetArg (vsh.c:1622)
==5304== by 0x17551D: vshCommandParse (vsh.c:1418)
==5304== by 0x175F25: vshCommandArgvParse (vsh.c:1638)
==5304== by 0x130940: virshParseArgv (virsh.c:820)
==5304== by 0x130C49: main (virsh.c:922)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The list_guests function in libvirt-guests uses 'grep -v' to filter
Xen domain0 from a list of guests. If domain0 is the only item in
the list, 'grep -v' returns 1, causing the 'stop' operation to fail
when action is 'suspend'. Improve the filtering by using sed to remove
domain0 from the list of guests.
This commit fixes the virsh prompt when reconnection to the same URI is
called: `virsh # connect --readonly` (Reconnect). The problem is
happening because the code is considering URI (name) as a mandatory
parameter to change the prompt. This commit remove the assignment into
`priv->readonly` from `if (name)` conditional.
Before:
virsh # uri
qemu:///system
virsh # connect --readonly
virsh #
After:
virsh # uri
qemu:///system
virsh # connect --readonly
virsh >
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1507737
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
My latest commit of a785186446 uncovered a problem we fixed
in 9eb23fe2 but then reverted in 834c5720e4. Turns out, some
systems (I'm looking at you OS X) have ancient readline with
broken header file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
According to the man page <interface-device> can be specified either by
name or MAC address, adjust the command's help accordingly.
Signed-off-by:ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Because WARN_CFLAGS and COVERAGE_CFLAGS are not set globally, we
rely on each binary built to include WARN_CFLAGS/COVERAGE_CFLAGS.
But it is easy to forget those - e.g. libvirt_shell.la. However,
don't enable WARN_FLAGS (i.e. don't include AM_CFLAGS) for
wireshark plugin - parts of that code are generated and trigger
some warnings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are couple of limitations when it comes to option types and
flags for the options. For instance, VSH_OT_STRING cannot have
VSH_OFLAG_REQ set (commit c7543a728). For some reason this is
checked in vshCmddefHelp() but not in vshCmddefCheckInternals().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It is literally only a wrapper around virBitmapNewData() and
virBitmapFormat(), only the naming was wrong since it was introduced.
And because we have virBitmap*String functions where the meaning of
the 'String' is constant, this might confuse someone.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since update to glibc-2.26 removed the /usr/include/rpc/rpc.h we used until now,
it showed us a problem with not using XDR_CFLAGS properly. On linux that
variable has usually -I/usr/include/tirpc because we already probe for it
properly, we just don't use it everywhere we need. It is needed by wireshark
dissector as well as testutilsqemu.c (through includes) so the build fails with:
wireshark/src/packet-libvirt.c:33:10: fatal error: rpc/xdr.h: No such file or directory
#include <rpc/xdr.h>
^~~~~~~~~~~
and
In file included from ../src/logging/log_manager.h:29:0,
from ../src/qemu/qemu_domain.h:40,
from testutilsqemu.c:11:
../src/logging/log_protocol.h:9:10: fatal error: rpc/rpc.h: No such file or directory
#include <rpc/rpc.h>
^~~~~~~~~~~
Since lot of tests use testutilsqemu.c it is easier to add XDR_CFLAGS to
AM_CFLAGS than adding it to all $binary_CFLAGS. It's just for tests and we
already have bunch of CFLAGS there anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The 'set-lifcycle-action' is throwing a weird error after executing it with
the '--help' option. The command output is showing the options 'type' and
'action' are as optional, but they aren't. Both are required.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> [--type <string>] [--action <string>] ...
...
OPTIONS
[--domain] <string> domain name, id or uuid
error: internal error: bad options in command: 'set-lifecycle-action'
After applying this patch, both arguments are required now.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> <type> <action> [--config] ...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509870
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
In some cases there's dangling backward slash at the end of multi
line macros. While technically the code works, it will stop if
some empty lines are removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
