This API labels all sockets created until ClearSocketLabel is called in
a way that a vm can access them (i.e., they are labeled with svirt_t
based label in SELinux).
The APIs are designed to label a socket in a way that the libvirt daemon
itself is able to access it (i.e., in SELinux the label is virtd_t based
as opposed to svirt_* we use for labeling resources that need to be
accessed by a vm). The new name reflects this.
When virStreamAbort is called on a stream that has not been used yet,
quite confusing error is returned: "this function is not supported by
the connection driver". Let's just ignore such streams as there's
nothing to abort anyway.
If migration failed on source daemon, the migration is automatically
canceled by the daemon itself. Thus we don't need to call
virDomainMigrateConfirm3(cancelled=1). Calling it doesn't cause any harm
but the resulting error message printed in logs may confuse people.
Audit all changes to the qemu vm->current_snapshot, and make them
update the saved xml file for both the previous and the new
snapshot, so that there is always at most one snapshot with
<active>1</active> in the xml, and that snapshot is used as the
current snapshot even across libvirtd restarts.
This patch does not fix the case of virDomainSnapshotDelete(,CHILDREN)
where one of the children is the current snapshot; that will be later.
* src/conf/domain_conf.h (_virDomainSnapshotDef): Alter member
type and name.
* src/conf/domain_conf.c (virDomainSnapshotDefParseString)
(virDomainSnapshotDefFormat): Update clients.
* docs/schemas/domainsnapshot.rng: Tighten rng.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Reload current
snapshot.
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDiscard): Track current snapshot.
Changing the current vm, and writing that change to the file
system, all before a new qemu starts, is risky; it's hard to
roll back if starting the new qemu fails for some reason.
Instead of abusing vm->current_snapshot and making the command
line generator decide whether the current snapshot warrants
using -loadvm, it is better to just directly pass a snapshot all
the way through the call chain if it is to be loaded.
This frees up the last use of snapshot->def->active for qemu's
use, so the next patch can repurpose that field for tracking
which snapshot is current.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Don't use active
field of snapshot.
* src/qemu/qemu_process.c (qemuProcessStart): Add a parameter.
* src/qemu/qemu_process.h (qemuProcessStart): Update prototype.
* src/qemu/qemu_migration.c (qemuMigrationPrepareAny): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainCreate)
(qemuDomainSaveImageStartVM, qemuDomainObjStart)
(qemuDomainRevertToSnapshot): Likewise.
(qemuDomainSnapshotSetCurrentActive)
(qemuDomainSnapshotSetCurrentInactive): Delete unused functions.
https://bugzilla.redhat.com/show_bug.cgi?id=727709
mentions that if qemu fails to create the snapshot (such as what
happens on Fedora 15 qemu, which has qmp but where savevm is only
in hmp, and where libvirt is old enough to not try the hmp fallback),
then 'virsh snapshot-list dom' will show a garbage snapshot entry,
and the libvirt internal directory for storing snapshot metadata
will have a bogus file.
This fixes the fallout bug of polluting the snapshot-list with
garbage on failure (the root cause of the F15 bug of not having
fallback to hmp has already been fixed in newer libvirt releases).
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Allocate
memory before making snapshot, and cleanup on failure. Don't
dereference NULL if transient domain exited during snapshot creation.
* src/qemu/qemu_migration.c: avoid dead 'ret' assignment and silence
clang warning.
Detected by ccc-analyzer:
libvirt.c:4277:5: warning: Value stored to 'ret' is never read
ret = domain->conn->driver->domainMigrateConfirm3
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* src/qemu/qemu_migration.c: avoid dead 'ret' assignment and silence
clang warning.
Detected by ccc-analyzer:
CC libvirt_driver_qemu_la-qemu_migration.lo
qemu/qemu_migration.c:2046:5: warning: Value stored to 'ret' is never read
ret = qemuMigrationConfirm(driver, sconn, vm,
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
virFileOpenAs takes desired uid:gid as arguments, and not only uses
them for a fork/setuid/setgid when retrying failed open operations,
but additionally always forces the opened file to be owned by the
given uid:gid.
One example of the problems this causes is that, when restoring a
domain from a file that is owned by the qemu user, opening the file
chowns it to root. if dynamic_ownership=1 this is coincidentally
expected, but if dynamic_ownership=0, no existing file should ever
have its ownership changed.
This patch adds an extra check before calling fchown() - it only does
it if O_CREAT was passed to virFileOpenAs() in the openflags.
pciDeviceListSteal(pcidevs, dev) removes dev from pcidevs reducing
the length of pcidevs, so moving onto what was the next dev is wrong.
Instead callers should pop entry 0 repeatedly until pcidevs is empty.
Signed-off-by: Steve Hodgson <shodgson@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
I was testing a virsh patch, and wanted to see if I had passed the
flags I thought. But with LIBVIRT_DEBUG in the environment, I just
saw:
14:24:52.359: 15022: debug : virDomainSnapshotNum:15586 : dom=0xc9c180, (VM: name=rhel_6-64, uuid=48f8e8e7-e14f-0e14-02f0-ce71997bdcab),
including a trailing space. This fixes the issues.
* src/libvirt.c: Log flag parameters, even if currently unused.
(VIR_DOMAIN_DEBUG_0): Drop trailing comma in log.
(VIR_DOMAIN_DEBUG_1): Split guts into...
(VIR_DOMAIN_DEBUG_2): ...new macro.
* src/qemu/qemu_monitor_json.c: Handle error "CommandNotFound" and
report the error.
* src/qemu/qemu_monitor_text.c: If a sub info command is not found,
it prints the output of "help info", for other commands,
"unknown command" is printed.
Without this patch, libvirt always report:
An error occurred, but the cause is unknown
This patch was adapted from a patch by Osier Yang <jyang@redhat.com> to
break out detection of unrecognized text monitor commands into a separate
function.
Signed-off-by: Adam Litke <agl@us.ibm.com>
s/VIR_ERR_NO_SUPPORT/VIR_ERR_OPERATION_INVALID/
Special case is changes on lxcDomainInterfaceStats, if it's not
implemented on the platform, prints error like:
lxcError(VIR_ERR_OPERATION_INVALID, "%s",
_("interface stats not implemented on this platform"));
As the function is supported by driver actually, error like
VIR_ERR_NO_SUPPORT is confused.
Now, bad key-code in send-key can cause segmentation fault in libvirt.
(example)
% virsh send-key --codeset win32 12
error: End of file while reading data: Input/output error
This is caused by overrun at scanning keycode array.
Fix it.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Often, we want to use XPath functions on the just-parsed document;
fold this into the parser function for convenience.
* src/util/xml.h (virXMLParseHelper): Add argument.
(virXMLParseStrHelper, virXMLParseFileHelper): Delete.
(virXMLParseCtxt, virXMLParseStringCtxt, virXMLParseFileCtxt): New
macros.
* src/libvirt_private.syms (xml.h): Remove deleted functions.
* src/util/xml.c (virXMLParseHelper): Add argument.
(virXMLParseStrHelper, virXMLParseFileHelper): Delete.
ACK was given too soon. According to the code, the xm driver is
only used for inactive domains, and has no notion of an active
domain, thus, it cannot support undefine of a running domain.
The real fix for xen needs to be in the unified driver and/or
the xend level.
This reverts commit 49186deda6.
* src/qemu/qemu_monitor_text.c: BALLOON_PREFIX was defined as
"balloon: actual=", which cause "actual=" is stripped early before
the real parsing. This patch changes BALLOON_PREFIX into "balloon: ",
and modifies related functions, also renames
"qemuMonitorParseExtraBalloonInfo" to "qemuMonitorParseBalloonInfo",
as after the changing, it parses all the info returned by "info balloon".
Although we are flushing cache after some critical writes (e.g.
volume creation), after some others we do not (e.g. volume cloning).
This patch fix this issue. That is for volume cloning, writing
header of logical volume, and storage wipe.
When spice_tls is set but listen_tls is not, we don't initialize
GnuTLS library. So any later gnutls call (e.g. during migration,
where we initialize a certificate) will access uninitialized GnuTLS
internal structs and throws an error.
Although, we might now initialize GnuTLS twice, it is safe according
to the documentation:
This function can be called many times,
but will only do something the first time.
This patch creates 2 functions: virNetTLSInit and virNetTLSDeinit
with respect to written above.
Regression introduced in commit b7e5ca4.
Mingw lacks kill(), but we were only using it for a sanity check;
so we can go with one less check.
Also, on OOM error, this function should outright fail rather than
claim that the pid file was successfully read.
* src/util/virpidfile.c (virPidFileReadPathIfAlive): Skip kill
call where unsupported, and report error on OOM.
If a client had initiated a stream abort, it will have a call
waiting for a reply in the queue. If more data continues to
arrive on the stream, the abort command could mistakenly get
signalled as complete. Remove the code from async data processing
that looked for waiting calls. Add a sanity check to ensure no
async call can ever be marked as needing a reply
* src/rpc/virnetclient.c: Ensure async data packets can't
trigger a reply
A virsh command like:
migrate --live --copy-storage-all Guest qemu+ssh://user@host/system
--persistent --verbose
shows
Migration: [ 0 %]
during the storage copy and does not start counting
until the ram transfer starts
Fix this by scraping optional disk transfer status, and adding it
into the progress meter.
Otherwise the device will still be bound to pci-stub driver even
it's set as "managed=yes" when do detaching. Of course, it won't
triger any driver reprobing too.
If a stream gets a server initiated abort, the client may still
send an abort request before it receives the server side abort.
This causes the server to send back another abort for the
stream. Since the protocol defines that abort is the last thing
to be sent, the client gets confused by this second abort from
the server. If the stream is already shutdown, just drop any
client requested abort, rather than sending back another message.
This fixes the regression from previous versions.
Tested as follows
In one virsh session
virsh # start foo
virsh # console foo
In other virsh session
virsh # destroy foo
The first virsh session should be able to continue issuing
commands without error. Prior to this patch it saw
virsh # list
error: Failed to list active domains
error: An error occurred, but the cause is unknown
virsh # list
error: Failed to list active domains
error: no call waiting for reply with prog 536903814 vers 1 serial 9
* src/rpc/virnetserverprogram.c: Drop abort requests
for streams which no longer exist
Every active stream results in a reference being held on the
virNetServerClientPtr object. This meant that if a client quit
with any streams active, although all I/O was stopped the
virNetServerClientPtr object would leak. This causes libvirtd
to leak any file handles associated with open streams when a
client quit
To fix this, when we call virNetServerClientClose there is a
callback invoked which lets the daemon release the streams
and thus the extra references
* daemon/remote.c: Add a hook to close all streams
* daemon/stream.c, daemon/stream.h: Add API for releasing
all streams
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h:
Allow registration of a hook to trigger when closing client
Get rid of the #if __linux__ check in virPidFileReadPathIfAlive that
was preventing a check of a symbolic link in /proc/<pid>/exe on
non-linux platforms against an expected executable. Replace
this with a run-time check testing whether the /proc/<pid>/exe is a
symbolic link and if so call the function doing the comparison
against the expected file the link is supposed to point to.
This patch renames getPhysfn to getPhysfnDev and adds code to get the
Physical function and Virtual Function index of the direct attach linkdev (if
the direct attach interface is a SRIOV VF). The idea is to send the port
profile message to a PF if the direct attach interface is a SRIOV VF.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
This patch adds the following functions to get PF/VF relationship of an SRIOV
network interface:
ifaceIsVirtualFunction: Function to check if a network interface is a SRIOV VF
ifaceGetVirtualFunctionIndex: Function to get VF index if a network interface is a SRIOV VF
ifaceGetPhysicalFunction: Function to get the PF net interface name of a SRIOV VF net interface
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
This patch adds the following helper functions:
pciDeviceIsVirtualFunction: Function to check if a pci device is a sriov VF
pciGetVirtualFunctionIndex: Function to get the VF index of a sriov VF
pciDeviceNetName: Function to get the network device name of a pci device
pciConfigAddressCompare: Function to compare pci config addresses
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch moves some of the sriov related pci code from node_device driver
to src/util/pci.[ch]. Some functions had to go thru name and argument list
change to accommodate the move.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
In some versions of qemu, both virtio-blk-pci and virtio-net-pci
devices can have an event_idx setting that determines some details of
event processing. When it is enabled, it "reduces the number of
interrupts and exits for the guest". qemu will automatically enable
this feature when it is available, but there may be cases where this
new feature could actually make performance worse (NB: no such case
has been found so far).
As a safety switch in case such a situation is encountered in the
field, this patch adds a new attribute "event_idx" to the <driver>
element of both disk and interface devices. event_idx can be set to
"on" (to force event_idx on in case qemu has it disabled by default)
or "off" (for force event_idx off). In the case that event_idx support
isn't present in qemu, the attribute is ignored (this on the advice of
the qemu developer).
docs/formatdomain.html.in: document the new flag (marking it as
"don't mess with this!"
docs/schemas/domain.rng: add event_idx in appropriate places
src/conf/domain_conf.[ch]: add event_idx to parser and formatter
src/libvirt_private.syms: export
virDomainVirtioEventIdx(From|To)String
src/qemu/qemu_capabilities.[ch]: detect and report event_idx in
disk/net
src/qemu/qemu_command.c: add event_idx parameter to qemu commandline
when appropriate.
tests/qemuxml2argvdata/qemuxml2argv-event_idx.args,
tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml,
tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c: test cases for event_idx.
By opening a connection to remote qemu process ourselves and passing the
socket to qemu we get much better errors than just "migration failed"
when the connection is opened by qemu.
The core of these two functions is very similar and most of it is even
exactly the same. Factor out the core functionality into a separate
function to remove code duplication and make further changes easier.
With gcc 4.5.1:
util/virpidfile.c: In function 'virPidFileAcquirePath':
util/virpidfile.c:308:66: error: nested extern declaration of '_gl_verify_function2' [-Wnested-externs]
Then in tests/commandtest.c, the new virPidFile APIs need to be used.
* src/util/virpidfile.c (virPidFileAcquirePath): Move verify to
top level.
* tests/commandtest.c: Use new pid APIs.
In daemons using pidfiles to protect against concurrent
execution there is a possibility that a crash may leave a stale
pidfile on disk, which then prevents later restart of the daemon.
To avoid this problem, introduce a pair of APIs which make
use of virFileLock to ensure crash-safe & race condition-safe
pidfile acquisition & releae
* src/libvirt_private.syms, src/util/virpidfile.c,
src/util/virpidfile.h: Add virPidFileAcquire and virPidFileRelease
In some cases the caller of virPidFileRead might like extra checks
to determine whether the pid just read is really the one they are
expecting. This adds virPidFileReadIfAlive which will check whether
the pid is still alive with kill(0, -1), and (on linux only) will
look at /proc/$PID/path
* libvirt_private.syms, util/virpidfile.c, util/virpidfile.h: Add
virPidFileReadIfValid and virPidFileReadPathIfValid
* network/bridge_driver.c: Use new APIs to check PID validity
The functions for manipulating pidfiles are in util/util.{c,h}.
We will shortly be adding some further pidfile related functions.
To avoid further growing util.c, this moves the pidfile related
functions into a dedicated virpidfile.{c,h}. The functions are
also all renamed to have 'virPidFile' as their name prefix
* util/util.h, util/util.c: Remove all pidfile code
* util/virpidfile.c, util/virpidfile.h: Add new APIs for pidfile
handling.
* lxc/lxc_controller.c, lxc/lxc_driver.c, network/bridge_driver.c,
qemu/qemu_process.c: Add virpidfile.h include and adapt for API
renames
Add some simple wrappers around the fcntl() discretionary file
locking capability.
* src/util/util.c, src/util/util.h, src/libvirt_private.syms: Add
virFileLock and virFileUnlock APIs
We forgot to add virDomainUndefineFlags for a couple of hypervisors.
This wires up trivial versions (since neither hypervisor supports
managed save yet, they do not need to support any flags).
* src/vbox/vbox_tmpl.c (vboxDomainCreateXML): Update caller.
(vboxDomainUndefine): Move guts...
(vboxDomainUndefineFlags): ...to new function.
* src/xenapi/xenapi_driver.c (xenapiDomainUndefine)
(xenapiDomainUndefineFlags): Likewise.
Our logic throws off analyzer tools:
ptr var = NULL;
if (flags == 0) flags = live ? _LIVE : _CONFIG;
if (flags & _LIVE) do stuff
if (flags & _CONFIG) var = non-null;
if (flags & _LIVE) do more stuff
else if (flags & _CONFIG) use var
the tools keep thinking that var can still be NULL in the last
if clause, adding the hint shuts them up.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters): Add a
static analysis hint.
While the first encountered dns host record is being parsed, it's
possible for virNetworkDef::hosts to point to memory that has been
allocated, but virNetworkDef::nhosts to still be 0. If there is a
failure during that time, virNetworkDef::hosts will be leaked.
Although this isn't currently the case for virNetworkDef::txtrecords,
it could become that way through future re-factoring, and it hurts
nothing to restructure the freeing of txtrecord data to match that of
hosts data.
The following XML:
<serial type='udp'>
<source mode='connect' service='9999'/>
</serial>
is accepted by domain_conf.c but maps to the qemu command line:
-chardev udp,host=127.0.0.1,port=2222,localaddr=(null),localport=(null)
qemu can cope with everything omitting except the connection port, which
seems to also be the intent of domain_conf validation, so let's not
generate bogus command lines for that case.
The defaults are empty strings for addresses and 0 for the localport
Additionally, tweak the qemu cli parsing to handle omitted host
parameters
for -serial udp
Transient domains reject attempts to set autostart, and using
virDomainCreate to restart a domain only works on persistent
domains. Therefore, managed save makes no sense on transient
domains, and should be rejected up front rather than creating
an otherwise unrecoverable managed save file.
Besides, transient domains imply that a lot more management is
being done by the upper layer; this includes the assumption
that the upper layer is okay managing the saved state file
created by virDomainSave, and does not need to use managed save.
* src/libvirt.c: Document that transient domains are incompatible
with managed save.
* src/qemu/qemu_driver.c (qemuDomainManagedSave): Enforce it.
* src/libxl/libxl_driver.c (libxlDomainManagedSave): Likewise.
I noticed some inconsistent use of 'else'.
* src/qemu/qemu_driver.c (qemuCPUCompare)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDiscard): Match coding conventions.
If a snapshot with the name already exists, virDomainSnapshotAssignDef()
just returns NULL, in which case the snapshot definition is leaked.
Currently this leak is not a big problem, since qemuDomainSnapshotLoad()
is only called once during initial startup of libvirtd.
Signed-off-by: Philipp Hahn <hahn@univention.de>
A previous commit gave the LXC driver the ability to mount
block devices for the container filesystem. Through use of
the loopback device functionality, we can build on this to
support use of plain file images for LXC filesytems.
By setting the LO_FLAGS_AUTOCLEAR flag we can ensure that
the loop device automatically disappears when the container
dies / shuts down
* src/lxc/lxc_container.c: Raise error if we see a file
based filesystem, since it should have been turned into
a loopback device already
* src/lxc/lxc_controller.c: Rewrite any filesystems of
type=file, into type=block, by binding the file image
to a free loop device
Currently the LXC driver can only populate filesystems from
host filesystems, using bind mounts. This patch allows host
block devices to be mounted. It autodetects the filesystem
format at mount time, and adds the block device to the cgroups
ACL. Example usage is
<filesystem type='block' accessmode='passthrough'>
<source dev='/dev/sda1'/>
<target dir='/home'/>
</filesystem>
* src/lxc/lxc_container.c: Mount block device filesystems
* src/lxc/lxc_controller.c: Add block device filesystems
to cgroups ACL
An application container shouldn't get a private /dev. Fix
the regression from 6d37888e6a
* src/lxc/lxc_container.c: Don't mount /dev for app containers
Detected by ccc-analyzer, reported by Alex Jia.
qemuProcessStart always calls qemuProcessWaitForMonitor with a
non-negative position, but qemuProcessAttach always calls with -1.
In the latter case, there is no log file we can scrape, so we
also should not be trying to scrape the logs if the qemu process
died at the very end.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Don't try
to read from log in qemuProcessAttach case.
This addresses https://bugzilla.redhat.com/show_bug.cgi?id=713728
When "defining" a new network (or one that exists but isn't currently
active) the new definition is stored in network->def, but for a
network that already exists and is active, the new definition is
stored in network->newDef, and then moved over to network->def as soon
as the network is destroyed.
However, the code that writes the dhcp and dns hosts files used by
dnsmasq was always using network->def for its information, even when
the new data was actually in network->newDef, so the hosts files
always lagged one edit behind the definition.
This patch changes the code to keep the pointer to the new definition
after it's been assigned into the network, and use it directly
(regardless of whether it's stored in network->newDef or network->def)
to construct the hosts files.
Value stored to 'ret' is never read, so remove this dead assignment.
* src/qemu/qemu_monitor_text.c: kill dead assignment.
Signed-off-by: Alex Jia <ajia@redhat.com>
Value stored to 'ret' is never read, in fact, 'cleanup' section will
directly return -1 when function is fail, so remove this dead assignment.
* src/qemu/qemu_process.c: kill dead assignment.
Signed-off-by: Alex Jia <ajia@redhat.com>
When trying to use any SASL authentication for TCP sockets by
setting auth_tls = "sasl" in libvirtd.conf on server side, the
client will hang because of the sasl session relocking other than
dropping the lock when exiting virNetSASLSessionExtKeySize()
* src/rpc/virnetsaslcontext.c: virNetSASLSessionExtKeySize drop the
lock on exit
This patch introduces a internal RPC API "virNetServerClose", which
is standalone with "virNetServerFree". it closes all the socket fds,
and unlinks the unix socket paths, regardless of whether the socket
is still referenced or not.
This is to address regression bug:
https://bugzilla.redhat.com/show_bug.cgi?id=725702
Detection based on gnutls_session doesn't work because GnuTLS 2.x.y
comes with a compat.h that defines gnutls_session to gnutls_session_t.
Instead detect this based on LIBGNUTLS_VERSION_MAJOR. Move this from
configure/config.h to gnutls_1_0_compat.h and make sure that all users
include gnutls_1_0_compat.h properly.
Also fix header guard in gnutls_1_0_compat.h.
Leak detected by Coverity; only possible on unlikely ptsname_r
failure. Additionally, the man page for ptsname_r states that
failure is merely non-zero, not necessarily -1.
* src/util/util.c (virFileOpenTtyAt): Avoid leak on ptsname_r
failure.
Coverity detected that ifaceGetNthParent had already dereferenced
'nth' prior to the conditional; all callers already complied with
passing a non-NULL pointer so make this part of the contract.
* src/util/interface.h (ifaceGetNthParent): Add annotations.
* src/util/interface.c (ifaceGetNthParent): Drop useless null check.
In virNetServerNew, Coverity didn't realize that srv->mdsnGroupName
can only be non-NULL if mdsnGroupName was non-NULL.
In virNetServerRun, Coverity didn't realize that the array is non-NULL
if the array count is non-zero.
* src/rpc/virnetserver.c (virNetServerNew): Use alternate pointer.
(virNetServerRun): Give coverity a hint.
Coverity complained that 395 out of 409 virAsprintf calls are
checked, and therefore assumed that the remaining cases are bugs
waiting to happen. But in each of these cases, a failed virAsprintf
will properly set the target string to NULL, and pass on that
failure to the caller, without wasting efforts to check the call.
Adding the ignore_value silences Coverity.
* src/conf/domain_audit.c (virDomainAuditGetRdev): Ignore
virAsprintf return value, when it behaves like we need.
* src/network/bridge_driver.c (networkDnsmasqLeaseFileNameDefault)
(networkRadvdConfigFileName, networkBridgeDummyNicName)
(networkRadvdPidfileBasename): Likewise.
* src/util/storage_file.c (absolutePathFromBaseFile): Likewise.
* src/openvz/openvz_driver.c (openvzGenerateContainerVethName):
Likewise.
* src/util/command.c (virCommandTranslateStatus): Likewise.
Quite a few leaks detected by coverity. For chr, the leaks were
close enough to the allocations to plug in place; for disk, the
leaks were separated from the allocation by enough other lines with
intermediate failure cases that I refactored the cleanup instead.
* src/qemu/qemu_command.c (qemuParseCommandLine): Plug leaks.
Warning detected by Coverity. No need for the NULL check, and
removing it silences the warning without any semantic change.
* src/qemu/qemu_migration.c (qemuMigrationFinish): All entries to
endjob had non-NULL vm.
Detected by Coverity. Freeing the wrong variable results in both
a memory leak and the likelihood of the caller dereferencing through
a freed pointer.
* src/rpc/virnettlscontext.c (virNetTLSSessionNew): Free correct
variable.
Coverity detected that 5 of 6 callers of virJSONValueArrayGet checked
for a NULL return; and that by not checking we risk a null deref
during an error. The error is unlikely since the prior call to
virJSONValueArraySize would probably have already caught any botched
JSON array parse, but better safe than sorry.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBlockJobInfo):
Check for NULL.
(qemuMonitorJSONExtractPtyPaths): Fix typo.
Detected by Coverity. We want to compare the result of fnmatch 'rv',
not our pre-set return value 'ret'.
* src/rpc/virnetsaslcontext.c (virNetSASLContextCheckIdentity):
Check correct variable.
Revert 6a1f5f568f. Now that libvirt_iohelper takes fds by
inheritance rather than by open() (commit 1eb66479), there is
no longer a race where the parent can unlink() a file prior to
the iohelper open()ing the same file. From there, it makes
more sense to have the callers both create and unlink, rather
than the caller create and the stream unlink, since the latter
was only needed when iohelper had to do the unlink.
* src/fdstream.h (virFDStreamOpenFile, virFDStreamCreateFile):
Callers are responsible for deletion.
* src/fdstream.c (virFDStreamOpenFileInternal): Don't leak created
file on failure.
(virFDStreamOpenFile, virFDStreamCreateFile): Drop parameter.
* src/lxc/lxc_driver.c (lxcDomainOpenConsole): Update callers.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemuDomainOpenConsole): Likewise.
* src/storage/storage_driver.c (storageVolumeDownload)
(storageVolumeUpload): Likewise.
* src/uml/uml_driver.c (umlDomainOpenConsole): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
The previous qemu patch could end up calling unlink(tmp) before
tmp was the name of a valid file (unlinking a fileXXXXXX template
instead), or calling unlink(tmp) twice on success (once here,
and once at the end of the stream). Meanwhile, vbox also suffered
from the same leaked tmp file bug.
* src/qemu/qemu_driver.c (qemuDomainScreenshot): Don't unlink on
success, or on invalid name.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Don't leak temp file.
Spotted by Coverity. Gnutls documents that buffer must be NULL
if gnutls_x509_crt_get_key_purpose_oid is to be used to determine
the correct size needed for allocating a buffer.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertKeyPurpose): Initialize buffer.
Spotted by coverity. If pipe2 fails, then we attempt to close
uninitialized fds, which may result in a double-close.
* src/rpc/virnetserver.c (virNetServerSignalSetup): Initialize fds.
Steps to reproduce this problem (vm1 is not running):
for i in `seq 50`; do virsh managedsave vm1& done; killall virsh
Pre-patch, virNetServerClientClose could end up setting client->sock
to NULL prior to other cleanup functions trying to use client->sock.
This fixes things by checking for NULL in more places, and by deferring
the cleanup until after all queued messages have been served.
* src/rpc/virnetserverclient.c (virNetServerClientRegisterEvent)
(virNetServerClientGetFD, virNetServerClientIsSecure)
(virNetServerClientLocalAddrString)
(virNetServerClientRemoteAddrString): Check for closed socket.
(virNetServerClientClose): Rearrange close sequence.
Analysis from Wen Congyang.
This patch adds an internal function openvzGetVEStatus to
get the real state of the domain. This function is used in
various places in the driver, in particular to detect when
the domain has been shut down by the user with the "halt"
command.
Currently, we attempt to run sync job and async job at the same time. It
means that the monitor commands for two jobs can be run in any order.
In the function qemuDomainObjEnterMonitorInternal():
if (priv->job.active == QEMU_JOB_NONE && priv->job.asyncJob) {
if (qemuDomainObjBeginNestedJob(driver, obj) < 0)
We check whether the caller is an async job by priv->job.active and
priv->job.asynJob. But when an async job is running, and a sync job is
also running at the time of the check, then priv->job.active is not
QEMU_JOB_NONE. So we cannot check whether the caller is an async job
in the function qemuDomainObjEnterMonitorInternal(), and must instead
put the burden on the caller to tell us when an async command wants
to do a nested job.
Once the burden is on the caller, then only async monitor enters need
to worry about whether the VM is still running; for sync monitor enter,
the internal return is always 0, so lots of ignore_value can be dropped.
* src/qemu/THREADS.txt: Reflect new rules.
* src/qemu/qemu_domain.h (qemuDomainObjEnterMonitorAsync): New
prototype.
* src/qemu/qemu_process.h (qemuProcessStartCPUs)
(qemuProcessStopCPUs): Add parameter.
* src/qemu/qemu_migration.h (qemuMigrationToFile): Likewise.
(qemuMigrationWaitForCompletion): Make static.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitorInternal): Add
parameter.
(qemuDomainObjEnterMonitorAsync): New function.
(qemuDomainObjEnterMonitor, qemuDomainObjEnterMonitorWithDriver):
Update callers.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemudDomainCoreDump, doCoreDump, processWatchdogEvent)
(qemudDomainSuspend, qemudDomainResume, qemuDomainSaveImageStartVM)
(qemuDomainSnapshotCreateActive, qemuDomainRevertToSnapshot):
Likewise.
* src/qemu/qemu_process.c (qemuProcessStopCPUs)
(qemuProcessFakeReboot, qemuProcessRecoverMigration)
(qemuProcessRecoverJob, qemuProcessStart): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationToFile)
(qemuMigrationWaitForCompletion, qemuMigrationUpdateJobStatus)
(qemuMigrationJobStart, qemuDomainMigrateGraphicsRelocate)
(doNativeMigrate, doTunnelMigrate, qemuMigrationPerformJob)
(qemuMigrationPerformPhase, qemuMigrationFinish)
(qemuMigrationConfirm): Likewise.
* src/qemu/qemu_hotplug.c: Drop unneeded ignore_value.
whether or not previous return value is -1, the following codes will be
executed for a inactive guest in src/qemu/qemu_driver.c:
ret = virDomainSaveConfig(driver->configDir, persistentDef);
and if everything is okay, 'ret' is assigned to 0, the previous 'ret'
will be overwritten, this patch will fix this issue.
* src/qemu/qemu_driver.c: avoid return value is overwritten when give a argument
in out of blkio weight range for a inactive guest.
* how to reproduce?
% virsh blkiotune ${guestname} --weight 10
% echo $?
Note: guest must be inactive, argument 10 in out of blkio weight range,
and can get a error information by checking libvirtd.log, however,
virsh hasn't raised any error information, and return value is 0.
https://bugzilla.redhat.com/show_bug.cgi?id=726304
Signed-off-by: Alex Jia <ajia@redhat.com>
whether or not previous return value is -1, the following codes will be
executed for a inactive guest in qemuDomainSetMemoryParameters:
ret = virDomainSaveConfig(driver->configDir, persistentDef);
and if everything is okay, 'ret' is assigned to 0, the previous 'ret'
will be overwritten, this patch will fix this issue.
* src/qemu/qemu_driver.c: avoid return value is overwritten when set
min_guarante value to a inactive guest.
* how to reproduce?
% virsh memtune ${guestname} --min_guarante 1024
% echo $?
Note: guest must be inactive, in fact, 'min_guarante' hasn't been implemented
in memory tunable, and I can get the error when check actual libvirtd.log,
however, virsh hasn't raised any error information, and return value is 0.
Signed-off-by: Alex Jia <ajia@redhat.com>
Introduced by f9a837da73, the condition is not changed after
the else clause is removed. So now it quit with "domain is not
running" when the domain is running. However, when the domain is
not running, it reports "no job is active".
How to reproduce:
1)
% virsh start $domain
% virsh domjobabort $domain
error: Requested operation is not valid: domain is not running
2)
% virsh destroy $domain
% virsh domjobabort $domain
error: Requested operation is not valid: no job is active on the domain
3)
% virsh save $domain /tmp/$domain.save
Before above commands finished, try to abort job in another terminal
% virsh domabortjob $domain
error: Requested operation is not valid: domain is not running
Originally noticed by comparing the xml generated by virDomainSave
with the xml produced by reparsing and redumping that xml, but I
also did an audit of every last use of VIR_DOMAIN_XML_INACTIVE in
domain_conf.c to ensure that no other discrepancies exist.
* src/conf/domain_conf.c (virDomainDeviceInfoIsSet): Add
parameter, and update all callers. Make static.
(virDomainNetDefFormat): Skip generated ifname.
(virDomainDefFormatInternal): Skip default <seclabel>.
(virDomainChrSourceDefParseXML): Skip generated pty path, and add
parameter. Update callers.
* src/conf/domain_conf.h (virDomainDeviceInfoIsSet): Delete.
* src/libvirt_private.syms (domain_conf.h): Update.
Using a macro ensures that all the code is looking for the same
prefix.
* src/conf/domain_conf.h (VIR_NET_GENERATED_PREFIX): New macro.
* src/conf/domain_conf.c (virDomainNetDefParseXML): Use it.
* src/uml/uml_conf.c (umlConnectTapDevice): Likewise.
* src/qemu/qemu_command.c (qemuNetworkIfaceConnect): Likewise.
Suggested by Laine Stump.
This is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=723862
which points out that a guest on an "isolated" network could
potentially exploit the DNS forwarding provided by dnsmasq to create a
communication channel to the outside.
This patch eliminates that possibility by adding the "--no-resolv"
argument to the dnsmasq commandline, which tells dnsmasq to not
forward on any requests that it can't resolve itself (by looking at
its own static hosts files and runtime list of dhcp clients), but to
instead return a failure for those requests.
This shouldn't cause any undesirable change from current
behavior, even in the case where a guest is currently configured with
multiple interfaces, one of them being connected to an isolated
network, and another to a network that does have connectivity to the
outside. If the isolated network's DNS server is queried for a name
it doesn't know, it will return "Refused" rather than "Unknown", which
indicates to the guest that it should query other servers, so it then
queries the connected DNS server, and gets the desired response.
Without this, cygwin failed to compile:
In file included from ../src/rpc/virnetmessage.h:24,
from ../src/rpc/virnetclient.h:27,
from remote/remote_driver.c:31:
../src/rpc/virnetprotocol.h:9:21: error: rpc/rpc.h: No such file or directory
With that fixed, compilation warned:
rpc/virnetsocket.c: In function 'virNetSocketNewListenUNIX':
rpc/virnetsocket.c:347: warning: format '%d' expects type 'int', but argument 8 has type 'gid_t' [-Wformat]
rpc/virnetsocket.c: In function 'virNetSocketGetLocalIdentity':
rpc/virnetsocket.c:743: warning: pointer targets in passing argument 5 of 'getsockopt' differ in signedness
* src/Makefile.am (libvirt_driver_remote_la_CFLAGS)
(libvirt_net_rpc_client_la_CFLAGS)
(libvirt_net_rpc_server_la_CFLAGS): Include XDR_CFLAGS, for rpc
headers on cygwin.
* src/rpc/virnetsocket.c (virNetSocketNewListenUNIX)
(virNetSocketGetLocalIdentity): Avoid compiler warnings.
Commit 3709a386 ported hooks codes to new command execution API,
together with the useful error message removed. Though we can't
get "errbuf" from the new command execution API anymore, still
we can give a more useful error.
https://bugzilla.redhat.com/show_bug.cgi?id=726398
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location. But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.
Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first. Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: Eric Blake <eblake@redhat.com>
The goal here is that save-image-dumpxml fed back to
save-image-define should not change the save file; anywhere that
this is not the case is probably a bug in domain_conf.c.
* src/qemu/qemu_driver.c (qemuDomainSaveImageGetXMLDesc)
(qemuDomainSaveImageDefineXML): New functions.
(qemuDomainSaveImageOpen): Add parameter.
(qemuDomainRestoreFlags, qemuDomainObjRestore): Adjust clients.
With this, it is possible to update the path to a disk backing
image on either the save or restore action, without having to
binary edit the XML embedded in the state file.
This also modifies virDomainSave to output a smaller xml (only
the inactive xml, which is all the more virDomainRestore parses),
while still guaranteeing padding for most typical abi-compatible
xml replacements, necessary so that the next patch for
virDomainSaveImageDefineXML will not cause unnecessary
modifications to the save image file.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal): Add parameter,
only use inactive state, and guarantee padding.
(qemuDomainSaveImageOpen): Add parameter.
(qemuDomainSaveFlags, qemuDomainManagedSave)
(qemuDomainRestoreFlags, qemuDomainObjRestore): Update callers.
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
Found by:
for f in $(sed -n 's/.*Drv[^ ]* \([^;]*\);.*/\1/p' src/xen/xen_driver.h)
do
git grep "\(\.\|->\)$f\b" src/xen
done | cat
and looking through the resulting list to see which callback struct
members are still necessary.
* src/xen/xen_driver.h (xenUnifiedDriver): Drop all callbacks that
are only used directly.
* src/xen/xen_hypervisor.c (xenHypervisorDriver): Shrink list.
* src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
* src/xen/xend_internal.c (xenDaemonDriver): Likewise.
* src/xen/xm_internal.c (xenXMDriver): Likewise.
* src/xen/xs_internal.c (xenStoreDriver): Likewise.
No need to use a for loop if we know there is exactly one client.
Found by:
for f in $(sed -n 's/.*Drv[^ ]* \([^;]*\);.*/\1/p' src/xen/xen_driver.h)
do
git grep "\(\.\|->\)$f\b" src/xen
done | cat
and looking through the resulting list to see which callback struct
members are used exactly once. The next patch will ensure that we
don't reintroduce uses of these callbacks.
* src/xen/xen_driver.c (xenUnifiedClose): Call close
unconditionally, to match xenUnifiedOpen.
(xenUnifiedNodeGetInfo, xenUnifiedDomainCreateXML)
(xenUnifiedDomainSave, xenUnifiedDomainRestore)
(xenUnifiedDomainCoreDump, xenUnifiedDomainUpdateDeviceFlags):
Make direct call to lone implementation.
* src/xen/xend_internal.h (xenDaemonDomainCoreDump)
(xenDaemonUpdateDeviceFlags, xenDaemonCreateXML): Add prototypes.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump)
(xenDaemonUpdateDeviceFlags, xenDaemonCreateXML): Export.
The callback struct is great when iterating through several
possibilities, but when calling a known callback, it's just
overhead. We can make the direct call in those cases.
* src/xen/xen_driver.c (xenUnifiedOpen, xenUnifiedDomainSuspend)
(xenUnifiedDomainResume, xenUnifiedDomainDestroyFlags): Make
direct calls instead of going through callback.
Using C99 initializers and xen-specific prefixes will make it
so that future patches are less likely to add callback members
to the xenUnifiedDriver struct, since the goal is to get rid
of the callback struct in the first place.
* src/xen/xen_driver.h (xenUnifiedDriver): Rename all struct
members, to make it obvious which ones are still in use.
* src/xen/xen_driver.c: Update all callers.
* src/xen/xen_hypervisor.c (xenHypervisorDriver): Rewrite with C99
initializers.
* src/xen/xend_internal.c (xenDaemonDriver): Likewise.
* src/xen/xs_internal.c (xenStoreDriver): Likewise.
* src/xen/xm_internal.c (xenXMDriver): Likewise.
* src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
This failure was introduced by commit dacee3d, which removed
listenAddr from the unions in virDomainGraphicsDef in favor of putting
it in the address attribute of virDomainGraphicsListenDef.
The domain XML now understands the <listen> subelement of its
<graphics> element (including when listen type='network'), and the
network driver has an internal API that will turn a network name into
an IP address, so the final logical step is to put the glue into the
qemu driver so that when it is starting up a domain, if it finds
<listen type='network' network='xyz'/> in the XML, it will call the
network driver to get an IPv4 address associated with network xyz, and
tell qemu to listen for vnc (or spice) on that address rather than the
default address (localhost).
The motivation for this is that a large installation may want the
guests' VNC servers listening on physical interfaces rather than
localhost, so that users can connect directly from the outside; this
requires sending qemu the appropriate IP address to listen on. But
this address will of course be different for each host, and if a guest
might be migrated around from one host to another, it's important that
the guest's config not have any information embedded in it that is
specific to one particular host. <listen type='network.../> can solve
this problem in the following manner:
1) on each host, define a libvirt network of the same name,
associated with the interface on that host that should be used
for listening (for example, a simple macvtap network: <forward
mode='bridge' dev='eth0'/>, or host bridge network: <forward
mode='bridge'/> <bridge name='br0'/>
2) in the <graphics> element of each guest's domain xml, tell vnc to
listen on the network name used in step 1:
<graphics type='vnc' port='5922'>
<listen type='network'network='example-net'/>
</graphics>
(all the above also applies for graphics type='spice').
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.
* docs/schemas/domain.rng: updated to allow the <listen> element
* docs/formatdomain.html.in: document the <listen> element and its
attributes.
* src/conf/domain_conf.[hc]:
1) The domain parser, formatter, and data structure are modified to
support 0 or more <listen> subelements to each <graphics>
element. The old style "legacy" listen attribute is also still
accepted, and will be stored internally just as if it were a
separate <listen> element. On output (i.e. format), the address
attribute of the first <listen> element of type 'address' will be
duplicated in the legacy "listen" attribute of the <graphic>
element.
2) The "listenAddr" attribute has been removed from the unions in
virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
This attribute is now in the <listen> subelement (aka
virDomainGraphicsListenDef)
3) Helper functions were written to provide simple access
(both Get and Set) to the listen elements and their attributes.
* src/libvirt_private.syms: export the listen helper functions
* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c
Modify all these files to use the listen helper functions rather
than directly referencing the (now missing) listenAddr
attribute. There can be multiple <listen> elements to a single
<graphics>, but the drivers all currently only support one, so all
replacements of direct access with a helper function indicate index
"0".
* tests/* - only 3 of these are new files added explicitly to test the
new <listen> element. All the others have been modified to reflect
the fact that any legacy "listen" attributes passed in to the domain
parse will be saved in a <listen> element (i.e. one of the
virDomainGraphicsListenDefs), and during the domain format function,
both the <listen> element as well as the legacy attributes will be
output.
On RHEL 5, with gcc 4.1.2:
rpc/virnetsaslcontext.c: In function 'virNetSASLSessionUpdateBufSize':
rpc/virnetsaslcontext.c:396: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
* src/rpc/virnetsaslcontext.c (virNetSASLSessionUpdateBufSize):
Use a union to work around gcc warning.
qemuMigrationUpdateJobStatus (called in a loop by migration
and save tasks) uses qemuDomainObjEnterMonitorWithDriver;
however, that function ended up starting a nested job without
releasing the driver.
Since no one else is making nested calls, we can inline the
internal functions to properly track driver_locked.
* src/qemu/qemu_domain.h (qemuDomainObjBeginNestedJob)
(qemuDomainObjBeginNestedJobWithDriver)
(qemuDomainObjEndNestedJob): Drop unused prototypes.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitorInternal):
Reflect driver lock to nested job.
(qemuDomainObjBeginNestedJob)
(qemuDomainObjBeginNestedJobWithDriver)
(qemuDomainObjEndNestedJob): Drop unused functions.
As written in virStorageFileGetMetadataFromFD decription, caller
must free metadata after use. Qemu driver miss this and therefore
leak metadata which can grow to huge mem leak if somebody query
for blockInfo a lot.
* tools/virsh.c: avoid memory leak in cmdVolPath.
* src/libvirt.c: Add doc for virStorageVolGetPath to tell one
must free() the returned path after use.
* how to reproduce?
% dd if=/dev/zero of=/var/lib/libvirt/images/foo.img count=1 bs=10M
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
* actual results:
Detected in valgrind run:
==16436== 32 bytes in 1 blocks are definitely lost in loss record 7 of 22
==16436== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==16436== by 0x386A314B3D: xdr_string (in /lib64/libc-2.12.so)
==16436== by 0x3DF8CD770D: xdr_remote_nonnull_string (remote_protocol.c:3
==16436== by 0x3DF8CD7EC8: xdr_remote_storage_vol_get_path_ret
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
Signed-off-by: Alex Jia <ajia@redhat.com>
The error in getCompressionType will never be reported, change
the errors codes into warning (VIR_WARN("%s", _(foo)); doesn't break
syntax-check rule), and also improve the docs in qemu.conf to tell
user the truth.
Make MIGRATION_OUT use the new helper methods.
This also introduces new protection to migration v3 process: the
migration job is held from Begin to Confirm to avoid changes to a domain
during migration (esp. between Begin and Perform phases). This change is
automatically applied to p2p and tunneled migrations. For normal
migration, this requires support from a client. In other words, if an
old (pre 0.9.4) client starts normal migration of a domain, the domain
will not be protected against changes between Begin and Perform steps.
Without this, a configure built by autoconf 2.59 was broken when
trying to detect which compiler warning flags were supported.
* .gnulib: Update to latest, for warnings.m4 fix.
* bootstrap.conf: Add fclose explicitly, to match recent gnulib
implicit dependency changes.
* src/qemu/qemu_conf.c (includes): Drop unused include.
* src/uml/uml_conf.c (include): Likewise.
Reported by Daniel P. Berrange.
Every DomainNetDef has a bandwidth, as does every portgroup.
Whenever a DomainNetDef of type NETWORK is about to be used, a call is
made to networkAllocateActualDevice(). This function chooses the "best"
bandwidth object and places it in the DomainActualNetDef.
From that point on, whenever some code needs to use the bandwidth data
for the interface, it's retrieved with virDomainNetGetActualBandwidth(),
which will always return the "best" info as determined in the
previous step.
When an incoming RPC message is ready for processing,
virNetServerClientDispatchRead()
will invoke the 'dispatchFunc' callback. This is set to
virNetServerDispatchNewMessage
This function puts the message + client in a queue for processing by the thread
pool. The thread pool worker function is
virNetServerHandleJob
The first thing this does is acquire an extra reference on the 'client'.
Unfortunately, between the time the message+client are put on the thread pool
queue, and the time the worker runs, the client object may have had its last
reference removed.
We clearly need to add the reference to the client object before putting the
client on the processing queue
* src/rpc/virnetserverclient.c: Add a reference to the client when
invoking the dispatch function
* src/rpc/virnetserver.c: Don't acquire a reference to the client
when in the worker thread
The cpu bandwidth is applied at the vcpu group level. We should apply it
at the vm group level too, because the vm may do heavy I/O, and it will affect
the other vm.
We apply cpu bandwidth at the vcpu and the vm group level, so we must ensure
that max(child_quota) <= parent_quota when we modify cpu bandwidth.
The virNetSASLContext, virNetSASLSession, virNetTLSContext and
virNetTLSSession classes previously relied in their owners
(virNetClient / virNetServer / virNetServerClient) to provide
locking protection for concurrent usage. When virNetSocket
gained its own locking code, this invalidated the implicit
safety the SASL/TLS modules relied on. Thus we need to give
them all explicit locking of their own via new mutexes.
* src/rpc/virnetsaslcontext.c, src/rpc/virnettlscontext.c: Add
a mutex per object
When setting up a server socket, we must skip EADDRINUSE errors
from bind, since the IPv6 socket bind may have already bound to
the IPv4 socket too. If we don't manage to bind to any sockets
at all though, we should then report the EADDRINUSE error as
normal.
This fixes the case where libvirtd would not exit if some other
program was listening on its TCP/TLS ports.
* src/rpc/virnetsocket.c: Report EADDRINUSE
Now that virDomainSetVcpusFlags knows about VIR_DOMAIN_AFFECT_CURRENT,
so should virDomainGetVcpusFlags.
Unfortunately, the virsh counterpart 'virsh vcpucount' has already
commandeered --current for a different meaning, so teaching virsh
to expose this in the next patch will require a bit of care.
* src/libvirt.c (virDomainGetVcpusFlags): Allow
VIR_DOMAIN_AFFECT_CURRENT.
* src/libxl/libxl_driver.c (libxlDomainGetVcpusFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetVcpusFlags): Likewise.
* src/test/test_driver.c (testDomainGetVcpusFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Likewise.
Although most functions in libvirt return 0 on success and < 0 on
failure, there are a few functions lingering around that return errno
(a positive value) on failure, and sometimes code calling those
functions incorrectly assumes the <0 standard. I noticed one of these
the other day when auditing networkStartDhcpDaemon after Guido Gunther
found a place where success was improperly returned on failure (that
patch has been acked and is pending a push). The problem was that it
expected the return value from virFileReadPid to be < 0 on failure,
but it was actually positive (it was also neglected to set the return
code in this case, similar to the bug found by Guido).
This all led to the fact that *all* of the virFile*Pid functions in
util.c are returning errno on failure. This patch remedies that
problem by changing them all to return -errno on failure, and makes
any necessary changes to callers of the functions. (In the meantime, I
also properly set the return code on failure of virFileReadPid in
networkStartDhcpDaemon).
In the XML file we now have
<cputune>
<shares>1024</shares>
<period>90000</period>
<quota>0</quota>
</cputune>
But the schedinfo parameter are being named
cpu_shares: 1024
cfs_period: 90000
cfs_quota: 0
The period/quota is per-vcpu value, so these new tunables should be named
'vcpu_period' and 'vcpu_quota'.
These functions parse given XML node and return pointer to the
output. Unknown elements are silently ignored. Attributes must
be integer and must fit in unsigned long long.
Free function frees elements of virBandwidth structure.
The new listenNetwork attribute needs to learn an IP address based on a
named network. This patch provides a function networkGetNetworkAddress
which provides that.
Some networks have an IP address explicitly in their configuration
(ie, those with a forward type of "none", "route", or "nat"). For
those, we can just return the IP address from the config.
The rest will have a physical device associated with them (either via
<bridge name='...'/>, <forward ... dev='...'/>, or possibly via a pool
of interfaces inside the network's <forward> element) and we will need
to ask the kernel for a current IP address of that device (via the
newly added ifaceGetIPAddress)
If networkGetNetworkAddress encounters an error while trying to learn
the address for a network, it will return -1. In the case that libvirt
has been compiled without the network driver, the call is a macro
which reduces to -2. This allows differentiating between a failure of
the network driver, and its complete absence.
This function uses ioctl(SIOCGIFADDR), which limits it to returning
the first IPv4 address of an interface, but that's what we want right
now (the place we're going to use the address only accepts one).
The sanlock plugin for libvirt expects the directory
/var/lib/libvirt/sanlock to exist. Create this and add
it to the RPM
* libvirt.spec.in: Add /var/lib/libvirt/sanlock
* src/Makefile.am: Create /var/lib/libvirt/sanlock
A container should not be allowed to modify stuff in /sys
or /proc/sys so make them readonly. Make /selinux readonly
so that containers think that selinux is disabled.
Honour the readonly flag when mounting container filesystems
from the guest XML config
* src/lxc/lxc_container.c: Support readonly mounts
Even in non-virtual root filesystem mode we should be mounting
more than just a new /proc. Refactor lxcContainerMountBasicFS
so that it does everything except for /dev and /dev/pts moving
that into lxcContainerMountDevFS. Pass in a source prefix
to lxcContainerMountBasicFS() so it can be used in both shared
root and private root modes.
* src/lxc/lxc_container.c: Unify mounting code for special
filesystems
The bind mount setup is about to get more complicated.
To avoid having to deal with several copies, pull it
out into a separate lxcContainerMountFSBind method.
Also pull out the iteration over container filesystems,
so that it will be easier to drop in support for non-bind
mount filesystems
* src/lxc/lxc_container.c: Pull bind mount code out into
lxcContainerMountFSBind
When libvirtd starts it it will sanity check its own certs,
and before libvirt clients connect to a remote server they
will sanity check their own certs. This patch allows such
sanity checking to be skipped. There is no strong reason to
need to do this, other than to bypass possible libvirt bugs
in sanity checking, or for testing purposes.
libvirt.conf gains tls_no_sanity_certificate parameter to
go along with tls_no_verify_certificate. The remote driver
client URIs gain a no_sanity URI parameter
* daemon/test_libvirtd.aug, daemon/libvirtd.conf,
daemon/libvirtd.c, daemon/libvirtd.aug: Add parameter to
allow cert sanity checks to be skipped
* src/remote/remote_driver.c: Add no_sanity parameter to
skip cert checks
* src/rpc/virnettlscontext.c, src/rpc/virnettlscontext.h:
Add new parameter for skipping sanity checks independantly
of skipping session cert validation checks
Also prepend $(AM_V_GEN) to the command line, mark virkeycode-mapgen.py
as executable and switch the shebang line from /bin/python to the
commonly use /usr/bin/python.
All of the functions in util/interface.c were returning 0 on success,
but some returned -1 on error, and some returned a positive value
(usually the value of errno, but sometimes just 1). Libvirt's standard
is to return < 0 on error (in the case of functions that need to
return errno, -errno is returned.
This patch modifies all functions in interface.c to consistently
return < 0 on error, and makes changes to callers of those functions
where necessary.
There is some commonality between the code for sanity checking
certs when initializing libvirt and the code for validating
certs during a live TLS session handshake. This patchset splits
up the sanity checking function into several smaller functions
each doing a specific type of check. The cert validation code
is then updated to also call into these functions
* src/rpc/virnettlscontext.c: Refactor cert validation code
The gnutls_certificate_type_set_priority method is deprecated.
Since we already set the default gnutls priority, it was not
serving any useful purpose and can be removed
* src/rpc/virnettlscontext.c: Remove gnutls_certificate_type_set_priority
call
If the virStateInitialize call fails we must shutdown libvirtd
since drivers will not be available. Just free'ing the virNetServer
is not sufficient, we must send a SIGTERM to ourselves so that
we interrupt the event loop and trigger a orderly shutdown
* daemon/libvirtd.c: Kill ourselves if state init fails
* src/rpc/virnetserver.c: Add some debugging to event loop
When an operation started by virDomainBlockPull completes (either with
success or with failure), raise an event to indicate the final status.
This API allow users to avoid polling on virDomainGetBlockJobInfo if
they would prefer to use an event mechanism.
* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/remote_protocol-structs: structure definitions for protocol verification
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
from QEMU monitor
The virDomainBlockPull* family of commands are enabled by the
following HMP/QMP commands: 'block_stream', 'block_job_cancel',
'info block-jobs' / 'query-block-jobs', and 'block_job_set_speed'.
* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk
streaming by using the proper qemu monitor commands.
* src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor
The generator can handle everything except virDomainGetBlockJobInfo().
* src/remote/remote_protocol.x: provide defines for the new entry points
* src/remote/remote_driver.c daemon/remote.c: implement the client and
server side for virDomainGetBlockJobInfo.
* src/remote_protocol-structs: structure definitions for protocol verification
* src/rpc/gendispatch.pl: Permit some unsigned long parameters
Set up the types for the block pull functions and insert them into the
virDriver structure definition. Symbols are exported in this patch to
prevent
documentation compile failures.
* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings
* are
implemented later
* src/libvirt_public.syms: export symbols
* docs/apibuild.py: Extend 'unsigned long' parameter exception to this
* API
Modifying the xml on either save or restore only gets you so
far - you have to remember to 'virsh dumpxml dom' just prior
to the 'virsh save' in order to have an xml file worth modifying
that won't be rejected due to abi breaks. To make this more
powerful, we need a way to grab the xml embedded within a state
file, and from there, it's not much harder to also support
modifying a state file in-place.
Also, virDomainGetXMLDesc didn't document its flags.
* include/libvirt/libvirt.h.in (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New prototypes.
* src/libvirt.c (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveImageGetXMLDesc)
(virDrvDomainSaveImgeDefineXML): New driver callbacks.
When auto-dumping a domain on crash events, or autostarting a domain
with managed save state, let the user configure whether to imply
the bypass cache flag.
* src/qemu/qemu.conf (auto_dump_bypass_cache, auto_start_bypass_cache):
Document new variables.
* src/qemu/libvirtd_qemu.aug (vnc_entry): Let augeas parse them.
* src/qemu/qemu_conf.h (qemud_driver): Store new preferences.
* src/qemu/qemu_conf.c (qemudLoadDriverConfig): Parse them.
* src/qemu/qemu_driver.c (processWatchdogEvent, qemuAutostartDomain):
Honor them.
Wire together the previous patches to support file system cache
bypass during API save/restore requests in qemu.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal, doCoreDump)
(qemudDomainObjStart, qemuDomainSaveImageOpen, qemuDomainObjRestore)
(qemuDomainObjStart): Add parameter.
(qemuDomainSaveFlags, qemuDomainManagedSave, qemudDomainCoreDump)
(processWatchdogEvent, qemudDomainStartWithFlags, qemuAutostartDomain)
(qemuDomainRestoreFlags): Update callers.
O_DIRECT has stringent requirements. Rather than make lots of changes
at each site that wants to use O_DIRECT, it is easier to offload
the work through a helper process that mirrors the I/O between a
pipe and the actual direct fd, so that the other end of the pipe
no longer has to worry about constraints.
Plus, if the kernel ever gains better posix_fadvise support, then we
only have to touch a single file to let all callers benefit from a
more efficient way to avoid file system caching.
* src/util/virfile.h (virFileDirectFdFlag, virFileDirectFdNew)
(virFileDirectFdClose, virFileDirectFdFree): New prototypes.
* src/util/virdirect.c: Implement new wrapper object.
* src/libvirt_private.syms (virfile.h): Export new symbols.
* cfg.mk (useless_free_options): Add to list.
* po/POTFILES.in: Add new translations.
Required for a coming patch where iohelper will operate on O_DIRECT
fds. There, the user-space memory must be aligned to file system
boundaries (at least 512, but using page-aligned works better, and
some file systems prefer 64k). Made tougher by the fact that
VIR_ALLOC won't work on void *, but posix_memalign won't work on
char * and isn't available everywhere.
This patch makes some simplifying assumptions - namely, output
to an O_DIRECT fd will only be attempted on an empty seekable
file (hence, no need to worry about preserving existing data
on a partial block, and ftruncate will work to undo the effects
of having to round up the size of the last block written), and
input from an O_DIRECT fd will only be attempted on a complete
seekable file with the only possible short read at EOF.
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for posix_memalign.
* src/util/iohelper.c (runIO): Use aligned memory, and handle
quirks of O_DIRECT on last write.
Rather than making the iohelper subject to a race in reopening
the file, it is nicer to pass an already-open fd by inheritance.
The old synopsis form must continue to work - if someone updates
their libvirt package and installs a new libvirt_iohelper but
without restarting the old libvirtd daemon, then the daemon can
still make calls using the old syntax but the new iohelper.
* src/util/iohelper.c (runIO): Split code for open...
(prepare): ...to new function.
(usage): Update synopsis.
(main): Allow alternate calling form.
* src/fdstream.c (virFDStreamOpenFileInternal): Use alternate form.
For all hypervisors that support save and restore, the new API
now performs the same functions as the old.
VBox is excluded from this list, because its existing domainsave
is broken (there is no corresponding domainrestore, and there
is no control over the filename used in the save). A later
patch should change vbox to use its implementation for
managedsave, and teach start to use managedsave results.
* src/libxl/libxl_driver.c (libxlDomainSave): Move guts...
(libxlDomainSaveFlags): ...to new function.
(libxlDomainRestore): Move guts...
(libxlDomainRestoreFlags): ...to new function.
* src/test/test_driver.c (testDomainSave, testDomainSaveFlags)
(testDomainRestore, testDomainRestoreFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSave)
(xenUnifiedDomainSaveFlags, xenUnifiedDomainRestore)
(xenUnifiedDomainRestoreFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSave, qemudDomainRestore):
Rename and move guts.
(qemuDomainSave, qemuDomainSaveFlags, qemuDomainRestore)
(qemuDomainRestoreFlags): ...here.
(qemudDomainSaveFlag): Rename...
(qemuDomainSaveInternal): ...to this, and update callers.
VIR_ERR_INVALID_ARG implies that an argument cannot possibly
be correct, given the current state of the API.
VIR_ERR_CONFIG_UNSUPPORTED implies that a configuration is
wrong, but arguments aren't configuration.
VIR_ERR_NO_SUPPORT implies that a function is completely
unimplemented.
But in the case of a function that is partially implemented,
yet the full power of the API is not available for that
driver, none of the above messages make sense. Hence a new
error message, implying that the argument is known to comply
with the current state of the API, and that while the driver
supports aspects of the function, it does not support that
particular use of the argument.
A good use case for this is a driver that supports
virDomainSaveFlags, but not the dxml argument of that API.
It might be feasible to also use this new error for all functions
that check flags, and which accept fewer flags than what is possible
in the public API. But doing so would get complicated, since
neither libvirt.c nor the remote driver may do flag filtering,
and every other driver would have to do a two-part check, first
using virCheckFlags on all public flags (which gives
VIR_ERR_INVALID_ARG for an impossible flag), followed by a
particular mask check for VIR_ERR_ARGUMENT_UNSUPPORTED (for a
possible public flag but unsupported by this driver).
* include/libvirt/virterror.h (VIR_ERR_ARGUMENT_UNSUPPORTED): New
error.
* src/util/virterror.c (virErrorMsg): Give it a message.
Suggested by Daniel P. Berrange.
Build failure on xenapi_driver from compiler warnings (flags was unused).
Build failure on xen (incorrect number of arguments). And in fixing
that, I obeyed the comments of struct xenUnifiedDriver that state
that we want to minimize the number of callback functions in that
struct, not add to it.
* src/xen/xen_driver.c (xenUnifiedDomainDestroyFlags): Use correct
arguments.
(xenUnifiedDomainDestroy): Simplify.
* src/xen/xen_driver.h (xenUnifiedDriver): Remove unused callback.
* src/xen/xen_hypervisor.c (xenHypervisorDestroyDomain): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainDestroy): Likewise.
* src/xen/xend_internal.h (xenDaemonDomainDestroyFlags): Likewise.
* src/xen/xm_internal.c (xenXMDriver): Likewise.
* src/xen/xs_internal.c (xenStoreDriver): Likewise.
* src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainDestroyFlags): Reject
unknown flags.
The network driver needs to assign physical devices for use by modes
that use macvtap, keeping track of which physical devices are in use
(and how many instances, when the devices can be shared). Three calls
are added:
networkAllocateActualDevice - finds a physical device for use by the
domain, and sets up the virDomainActualNetDef accordingly.
networkNotifyActualDevice - assumes that the domain was already
running, but libvirtd was restarted, and needs to be notified by each
already-running domain about what interfaces they are using.
networkReleaseActualDevice - decrements the usage count of the
allocated physical device, and frees the virDomainActualNetDef to
avoid later accidentally using the device.
bridge_driver.[hc] - the new APIs. When WITH_NETWORK is false, these
functions are all #defined to be "0" in the .h file (effectively
becoming a NOP) to prevent link errors.
qemu_(command|driver|hotplug|process).c - add calls to the above APIs
in the appropriate places.
tests/Makefile.am - we need to include libvirt_driver_network.la
whenever libvirt_driver_qemu.la is linked, to avoid unreferenced
symbols (in functions that are never called by the test
programs...)
This is the one function outside of domain_conf.c that plays around
with (even modifying) the internals of the virDomainNetDef, and thus
can't be fixed up simply by replacing direct accesses to the fields of
the struct with the GetActual*() access functions.
In this case, we need to check if the defined type is "network", and
if it is *then* check the actual type; if the actual type is "bridge",
then we can at least put the bridgename in a place where it can be
used; otherwise (if type isn't "bridge"), we behave exactly as we used
to - just null out *everything*.
The qemu driver accesses fields in the virDomainNetDef directly, but
with the advent of the virDomainActualNetDef, some pieces of
information may be found in a different place (the ActualNetDef) if
the network connection is of type='network' and that network is of
forward type='bridge|private|vepa|passthrough'. The previous patch
added functions to mask this difference from callers - they hide the
decision making process and just pick the value from the proper place.
This patch uses those functions in the qemu driver as a first step in
making qemu work with the new network types. At this point, the
virDomainActualNetDef is guaranteed always NULL, so the GetActualX()
function will return exactly what the def->X that's being replaced
would have returned (ie bisecting is not compromised).
There is one place (in qemu_driver.c) where the internal details of
the NetDef are directly manipulated by the code, so the GetActual
functions cannot be used there without extra additional code; that
file will be treated in a separate patch.
Previously all networks were composed of bridge devices created and
managed by libvirt, and the same operations needed to be done for all
of them when they were started and stopped (create and start the
bridge device, configure its MAC address and IP address, add iptables
rules). The new network types are (for now at least) managed outside
of libvirt, and the network object is used only to contain information
about the network, which is then used as each individual guest
connects itself.
This means that when starting/stopping one of these new networks, we
really want to do nothing, aside from marking the network as
active/inactive.
This has been setup as toplevel Start/Shutdown functions that do the
small bit of common stuff, then have a switch statement to execute
network type-specific start/shutdown code, then do a bit more common
code. The type-specific functions called for the new host bridge and
macvtap based types are currently empty.
In the future these functions may actually do something, and we will
surely add more functions that are similarly patterned. Once
everything has settled, we can make a table of "sub-driver" function
pointers for each network type, and store a pointer to that table in
the network object, then we can replace the switch statements with
calls to functions in the table.
The final step in this will be to add a new table (and corresponding
new functions) for new network types as they are added.
The network XML is updated in the following ways:
1) The <forward> element can now contain a list of forward interfaces:
<forward .... >
<interface dev='eth10'/>
<interface dev='eth11'/>
<interface dev='eth12'/>
<interface dev='eth13'/>
</forward>
The first of these takes the place of the dev attribute that is
normally in <forward> - when defining a network you can specify
either one, and on output both will be present. If you specify
both on input, they must match.
2) In addition to forward modes of 'nat' and 'route', these new modes
are supported:
private, passthrough, vepa - when this network is referenced by a
domain's interface, it will have the same effect as if the
interface had been defined as type='direct', e.g.:
<interface type='direct'>
<source mode='${mode}' dev='${dev}>
...
</interface>
where ${mode} is one of the three new modes, and ${dev} is an interface
selected from the list given in <forward>.
bridge - if a <forward> dev (or multiple devs) is defined, and
forward mode is 'bridge' this is just like the modes 'private',
'passthrough', and 'vepa' above. If there is no forward dev
specified but a bridge name is given (e.g. "<bridge
name='br0'/>"), then guest interfaces using this network will use
libvirt's "host bridge" mode, equivalent to this:
<interface type='bridge'>
<source bridge='${bridge-name}'/>
...
</interface>
3) A network can have multiple <portgroup> elements, which may be
selected by the guest interface definition (by adding
"portgroup='${name}'" in the <source> element along with the
network name). Currently a portgroup can only contain a
virtportprofile, but the intent is that other configuration items
may be put there int the future (e.g. bandwidth config). When
building a guest's interface, if the <interface> XML itself has no
virtportprofile, and if the requested network has a portgroup with
a name matching the name given in the <interface> (or if one of the
network's portgroups is marked with the "default='yes'" attribute),
the virtportprofile from that portgroup will be used by the
interface.
4) A network can have a virtportprofile defined at the top level,
which will be used by a guest interface when connecting in one of
the 'direct' modes if the guest interface XML itself hasn't
specified any virtportprofile, and if there are also no matching
portgroups on the network.
the domain XML <interface> element is updated in the following ways:
1) <virtualportprofile> can be specified when source type='network'
(previously it was only valid for source type='direct')
2) A new attribute "portgroup" has been added to the <source>
element. When source type='network' (the only time portgroup is
recognized), extra configuration information will be taken from the
<portgroup> element of the given name in the network definition.
3) Each virDomainNetDef now also potentially has a
virDomainActualNetDef which is a private object (never
exported/imported via the public API, and not defined in the RNG) that
is used to maintain information about the physical device that was
actually used for a NetDef of type VIR_DOMAIN_NET_TYPE_NETWORK.
The virDomainActualNetDef will only be parsed/formatted if the
parse/format function is called with the
VIR_DOMAIN_XML_INTERNAL_ACTUAL_NET flag set (which is only needed when
saving/loading a running domain's state info to the stateDir).
The virtPortProfile in the domain interface struct is now a separately
allocated object *pointed to by* (rather than contained in) the main
virDomainNetDef object. This is done to make it easier to figure out
when a virtualPortProfile has/hasn't been specified in a particular
config.
virtPortProfiles are currently only used in the domain XML, but will
soon also be used in the network XML. To prepare for that change, this
patch moves the structure definition into util/network.h and the parse
and format functions into util/network.c (I decided that this was a
better choice than macvtap.h/c for something that needed to always be
available on all platforms).
This introduces new API virDomainDestroyFlags to allow
domain destroying with flags, as the existing API virDomainDestroy
misses flags.
The set of flags is defined in virDomainDestroyFlagsValues enum,
which is currently commented, because it is empty.
Calling this API with no flags set (@flags == 0) is equivalent calling
virDomainDestroy.
In order to choose whether to use O_DIRECT when saving a domain image
to a file, we need a new flag. But virDomainSave was implemented
before our policy of all new APIs having a flag argument. Likewise
for virDomainRestore when restoring from a file.
The new flag name is chosen as CACHE_BYPASS so as not to preclude
a future solution that uses posix_fadvise once the Linux kernel has
a smarter implementation of that interface.
* include/libvirt/libvirt.h.in (virDomainCreateFlags)
(virDomainCoreDumpFlags): Add a flag.
(virDomainSaveFlags, virDomainRestoreFlags): New prototypes.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveFlags, virDrvDomainRestoreFlags):
New driver callbacks.
Otherwise, an ABI mismatch gives error messages attributing the target
xml string as current, and the current domain state as the new xml.
* src/qemu/qemu_migration.c (qemuMigrationBegin): Use correct
argument order.
Since libvirt is multi-threaded, we should use FD_CLOEXEC as much
as possible in the parent, and only relax fds to inherited after
forking, to avoid leaking an fd created in one thread to a fork
run in another thread. This gets us closer to that ideal, by
making virCommand automatically clear FD_CLOEXEC on fds intended
for the child, as well as avoiding a window of time with non-cloexec
pipes created for capturing output.
* src/util/command.c (virExecWithHook): Use CLOEXEC in parent. In
child, guarantee that all fds to pass to child are inheritable.
(getDevNull): Use CLOEXEC.
(prepareStdFd): New helper function.
(virCommandRun, virCommandRequireHandshake): Use pipe2.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Simplify caller.
We already have a precedent of function documentation in C files,
where it is closer to the implementation (witness libvirt.h vs.
libvirt.c); maintaining docs in both files risks docs going stale.
While I was at it, I used consistent doxygen style on all comments.
* src/util/command.h: Remove duplicate docs, and move unique
documentation...
* src/util/command.c: ...here.
Suggested by Matthias Bolte.
The only 'void name(void)' style procedure in the protocol is 'close' that
is handled special, but also programming errors like a missing _args or
_ret suffix on the structs in the .x files can create such a situation by
accident. Making the generator aware of this avoids bogus errors from the
generator such as:
Use of uninitialized value in exists at ./rpc/gendispatch.pl line 967.
Also this allows to get rid of the -c option and the special case code for
the 'close' procedure, as the generator handles it now correctly.
Reported by Michal Privoznik
It is common to see the sequence:
virErrorPtr save_err = virSaveLastError();
// do cleanup
virSetError(save_err);
virFreeError(save_err);
on cleanup paths. But for functions where it is desirable to
return the errno that caused failure, this sequence can clobber
that errno. virFreeError was already safe; this makes the other
two functions in the sequence safe as well, assuming all goes
well (on OOM, errno will be clobbered, but then again, save_err
won't reflect the real error that happened, so you are no longer
preserving the real situation - that's life with OOM).
* src/util/virterror.c (virSaveLastError, virSetError): Preserve
errno.
This patch implements cfs_period and cfs_quota's modification.
We can use the command 'virsh schedinfo' to query or modify cfs_period and
cfs_quota.
If you query period or quota from config file, the value 0 means it does not set
in the config file.
If you set period or quota to config file, the value 0 means that delete current
setting from config file.
If you modify period or quota while vm is running, the value 0 means that use
current value.
Add virtkey lib for usage-improvment and keycode translating.
Add 4 internal API for the aim
const char *virKeycodeSetTypeToString(int codeset);
int virKeycodeSetTypeFromString(const char *name);
int virKeycodeValueFromString(virKeycodeSet codeset, const char *keyname);
int virKeycodeValueTranslate(virKeycodeSet from_codeset,
virKeycodeSet to_offset,
int key_value);
* include/libvirt/libvirt.h.in: extend virKeycodeSet enum
* src/Makefile.am: add new virtkeycode module and rule to generate
virkeymaps.h
* src/util/virkeycode.c src/util/virkeycode.h: new module
* src/util/virkeycode-mapgen.py: python generator for virkeymaps.h
out of keymaps.csv
* src/libvirt_private.syms: extend private symbols for new module
* .gitignore: add generated virkeymaps.h
Should keep it as the same as:
http://git.gnome.org/browse/gtk-vnc/commit/src/keymaps.csv
All master keymaps are defined in a CSV file. THis covers
Linux keycodes, OSX keycodes, AT set1, 2 & 3, XT keycodes,
the XT encoding used by the Linux KBD driver, USB keycodes,
Win32 keycodes, the XT encoding used by Xorg on Cygwin,
the XT encoding used by Xorg on Linux with kbd driver.
* src/Makefile.am: added to EXTRA_DIST
* src/util/keymaps.csv: new file
Though we prefer users to have SSH keys setup, virt-manager users still
depend on remote SSH connections to launch a password dialog. This fixes
launch ssh-askpass
Fix suggested by danpb
DMI table is Intel & Intel-compatible specific. Therefore other
architectures miss dmidecode command. So we always fail in searching
for that command on non-Intel architectures.
If a key purpose or usage field is marked as non-critical in the
certificate, then a data mismatch is not (ordinarily) a cause for
rejecting the connection
* src/rpc/virnettlscontext.c: Honour key usage/purpose criticality
If key usage or purpose data is not present in the cert, the
RFC recommends that access be allowed. Also fix checking of
key usage to include requirements for client/server certs,
and fix key purpose checking to treat data as a list of bits
* src/libxl/libxl_driver.c: New callback for libxl_driver,
new function libxlDomainUndefineFlags, and changes libxlDomainUndefine
as a wrapper of libxlDomainUndefineFlags.
This introduces a new API virDomainUndefineFlags to control the
domain undefine process, as the existing API virDomainUndefine
doesn't support flags.
Currently only flag VIR_DOMAIN_UNDEFINE_MANAGED_SAVE is supported.
If the domain has a managed save image, including
VIR_DOMAIN_UNDEFINE_MANAGED_SAVE in @flags will also remove that
file, and omitting the flag will cause undefine process to fail.
This patch also changes the behavior of virDomainUndefine, if the
domain has a managed save image, the undefine will be refused.
Gnutls requires that certificates have basic constraints present
to be used as a CA certificate. OpenSSL doesn't add this data
by default, so add a sanity check to catch this situation. Also
validate that the key usage and key purpose constraints contain
correct data
* src/rpc/virnettlscontext.c: Add sanity checking of certificate
constraints
If the libvirt daemon or libvirt client is configured with bogus
certificates, it is very unhelpful to only find out about this
when a TLS connection is actually attempted. Not least because
the error messages you get back for failures are incredibly
obscure.
This adds some basic sanity checking of certificates at the
time the virNetTLSContext object is created. This is at libvirt
startup, or when creating a virNetClient instance.
This checks that the certificate expiry/start dates are valid
and that the certificate is actually signed by the CA that is
loaded.
* src/rpc/virnettlscontext.c: Add certificate sanity checks
Starting/ending jobs when closing the connection may reset any
error which was reported earlier in p2p migration. We must
save the original error before doing so. This means we can also
just call virConnectClose as normal, instead of virUnrefConnect
* src/qemu/qemu_migration.c: Preserve errors in p2p migration
Since the I/O callback registered against virNetSocket will
hold a reference on the virNetClient, we can't rely on the
virNetClientFree to be able to close the network connection.
The last reference will only go away when the event callback
fires (likely due to EOF from the server).
This is sub-optimal and can potentially cause a leak of the
virNetClient object if the server were to not explicitly
close the socket itself
* src/remote/remote_driver.c: Explicitly close the client
object when disconnecting
* src/rpc/virnetclient.c, src/rpc/virnetclient.h: Add a
virNetClientClose method
When unregistering an I/O callback from a virNetSocket object,
there is still a chance that an event may come in on the callback.
In this case it is possible that the virNetSocket might have been
freed already. Make use of a virFreeCallback when registering
the I/O callbacks and hold a reference for the entire time the
callback is set.
* src/rpc/virnetsocket.c: Register a free function for the
file handle watch
* src/rpc/virnetsocket.h, src/rpc/virnetserverservice.c,
src/rpc/virnetserverclient.c, src/rpc/virnetclient.c: Add
a free function for the socket I/O watches
Remove the need for a virNetSocket object to be protected by
locks from the object using it, by introducing its own native
locking and reference counting
* src/rpc/virnetsocket.c: Add locking & reference counting
If we get an I/O error in the async event callback for an RPC
client, we might not have consumed all pending data off the
wire. This could result in the callback being immediately
invoked again. At which point the same I/O might occur. And
we're invoked again. And again...And again...
Unregistering the async event callback if an error occurs is
a good safety net. The real error will be seen when the next
RPC method is invoked
* src/rpc/virnetclient.c: Unregister event callback on error
The current API build scripts will continue and exit with a zero
status even if they find problems. This has been the cause of many
build problems, or hidden build errors, in the past. Change the
scripts so they always exit with a non-zero status for any problems
they do not understand. Also turn off all debug output by default
so they respect $(AM_V_GEN)
* docs/Makefile.am: Use $(AM_V_GEN) for API/HTML scripts
* docs/apibuild.py, python/generator.py: Exit with non-zero status
if problems are found. Also be silent, not outputting any debug
messages.
* src/Makefile.am: Use $(AM_V_GEN) for ESX generator
* python/Makefile.am: Tweak rule
There were two API in driver.c that were silently masking flags
bits prior to calling out to the drivers, and several others
that were explicitly masking flags bits. This is not
forward-compatible - if we ever have that many flags in the
future, then talking to an old server that masks out the
flags would be indistinguishable from talking to a new server
that can honor the flag. In general, libvirt.c should forward
_all_ flags on to drivers, and only the drivers should reject
unknown flags.
In the case of virDrvSecretGetValue, the solution is to separate
the internal driver callback function to have two parameters
instead of one, with only one parameter affected by the public
API. In the case of virDomainGetXMLDesc, it turns out that
no one was ever mixing VIR_DOMAIN_XML_INTERNAL_STATUS with
the dumpxml path in the first place; that internal flag was
only used in saving and restoring state files, which happened
to be in functions internal to a single file, so there is no
mixing of the internal flag with a public flags argument.
Additionally, virDomainMemoryStats passed a flags argument
over RPC, but not to the driver.
* src/driver.h (VIR_DOMAIN_XML_FLAGS_MASK)
(VIR_SECRET_GET_VALUE_FLAGS_MASK): Delete.
(virDrvSecretGetValue): Separate out internal flags.
(virDrvDomainMemoryStats): Provide missing flags argument.
* src/driver.c (verify): Drop unused check.
* src/conf/domain_conf.h (virDomainObjParseFile): Delete
declaration.
(virDomainXMLInternalFlags): Move...
* src/conf/domain_conf.c: ...here. Delete redundant include.
(virDomainObjParseFile): Make static.
* src/libvirt.c (virDomainGetXMLDesc, virSecretGetValue): Update
clients.
(virDomainMemoryPeek, virInterfaceGetXMLDesc)
(virDomainMemoryStats, virDomainBlockPeek, virNetworkGetXMLDesc)
(virStoragePoolGetXMLDesc, virStorageVolGetXMLDesc)
(virNodeNumOfDevices, virNodeListDevices, virNWFilterGetXMLDesc):
Don't mask unknown flags.
* src/interface/netcf_driver.c (interfaceGetXMLDesc): Reject
unknown flags.
* src/secret/secret_driver.c (secretGetValue): Update clients.
* src/remote/remote_driver.c (remoteSecretGetValue)
(remoteDomainMemoryStats): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainMemoryStats): Likewise.
* daemon/remote.c (remoteDispatchDomainMemoryStats): Likewise.
When libvirtd restarts it will attempt to reconnect to existing
LXC containers. If it loads a XML state file for the container
the container will appear running. If we fail to read the PID
file, or fail to connect to the LXC monitor, we should be killing
off the guest, but if the VMs cgroup does not exist any more,
cleanup will get skipped. Reading the PID file is also pointless
since the PID is in the XML statefile
In lxcReconnectVM we do not need to read the PID file. If part
of the reconnect process fails we need to run the VM terminate
code as a safety net.
In lxcVMTerminate, if we can't obtain the VM cgroup, we know
the process has died, but we must still run lxcVMCleanup to
clear out the virDomainObjPtr live state
* src/lxc/lxc_driver.c: Fix cleanup of dead VMs on restart
These typos are introduced by file renaming in commit b17b4afaf.
src/remote/qemu_protocol.x \
src/remote/remote_protocol.x \
src/rpc/gendispatch.pl:
s/remote_generator/gendispatch/
src/rpc/genprotocol.pl:
s/remote\/remote_protocol/remote_protocol/
The regression is introduced by Commit da1eba6b, the new
codes with this commit doesn't reset "ret" to "-1" when
it fails on parsing the device XML (live device attachment)
This patch changes the codes to reset the "ret" and "-1",
and also changes the codes so that it don't modify "ret"
for condition checking.
How to reproduce:
% cat test.xml
<disk type='oops' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/test.img'/>
<target dev='vda' bus='virtio'/>
</disk>
% virsh attach-device $domain test.xml
Device attached successfully
The device attachment failed actually with error "unknown disk type 'oops'",
however, it reports success.
As long as we guarantee RPC struct layout stability, we might as
well also guarantee RPC enum value constancy.
* src/Makefile.am (r1, r2, PDWTAGS): Adjust rule to pick up named
and anonymous enums.
* src/remote_protocol-structs: Add enum values.
* src/qemu_protocol-structs: Likewise.
* src/virnetprotocol-structs: Likewise.
Enforce the recent flags cleanups - we want to use 'unsigned int flags'
in any of our APIs (except where backwards compatibility is important,
in the public migration APIs), and that all flags are checked for
validity (except when there are stub functions that completely
ignore the flags argument).
There are a few minor tweaks done here to avoid false positives:
signed arguments passed to open() are renamed oflags, and flags
arguments that are legitimately ignored are renamed flags_unused.
* cfg.mk (sc_flags_usage): New rule.
(exclude_file_name_regexp--sc_flags_usage): And a few exemptions.
(sc_flags_debug): Tweak wording.
* src/util/iohelper.c (runIO, main): Rename variable.
* src/util/util.c (virSetInherit): Likewise.
* src/fdstream.h (virFDStreamOpenFile, virFDStreamCreateFile):
Likewise.
* src/fdstream.c (virFDStreamOpenFileInternal)
(virFDStreamOpenFile, virFDStreamCreateFile): Likewise.
* src/util/command.c (virExecWithHook) [WIN32]: Likewise.
* src/util/util.c (virFileOpenAs, virDirCreate) [WIN32]: Likewise.
* src/locking/lock_manager.c (virLockManagerPluginNew)
[!HAVE_DLFCN_H]: Likewise.
* src/locking/lock_driver_nop.c (virLockManagerNopNew)
(virLockManagerNopAddResource, virLockManagerNopAcquire)
(virLockManagerNopRelease, virLockManagerNopInquire): Likewise.
Silently ignored flags get in the way of new features that
use those flags.
Regarding ESX migration flags - right now, ESX silently enforces
VIR_MIGRATE_PERSIST_DEST, VIR_MIGRATE_UNDEFINE_SOURCE, and
VIR_MIGRATE_LIVE, even if those flags were not supplied; it ignored
other flags. This patch does not change the implied bits (it permits
but does not require them), but enforces only the supported bits.
If further cleanup is needed to be more particular about migration
flags, that should be a separate patch.
* src/esx/esx_device_monitor.c (esxDeviceOpen): Reject unknown
flags.
* src/esx/esx_driver.c (esxOpen, esxDomainReboot)
(esxDomainXMLFromNative, esxDomainXMLToNative)
(esxDomainMigratePrepare, esxDomainMigratePerform)
(esxDomainMigrateFinish): Likewise.
* src/esx/esx_interface_driver.c (esxInterfaceOpen): Likewise.
* src/esx/esx_network_driver.c (esxNetworkOpen): Likewise.
* src/esx/esx_nwfilter_driver.c (esxNWFilterOpen): Likewise.
* src/esx/esx_secret_driver.c (esxSecretOpen): Likewise.
* src/esx/esx_storage_driver.c (esxStorageOpen): Likewise.
Commit 461e0f1a broke migration, because there was a code path
that tried to enable an internal flag while still going through
the public function. Split the internal flag into a separate
callback, and validate that flags do not overlap.
* src/conf/domain_conf.c (virDomainDefFormat): Split...
(virDomainDefFormatInternal): ...to separate the flag check.
(virDomainObjFormat): Adjust caller.
Commit f548480b broke migration v3 on qemu, because the driver
passed flags on through to qemu_migration even though
qemu_migration wasn't using those flags.
* src/qemu/qemu_migration.h (QEMU_MIGRATION_FLAGS): New define.
* src/qemu/qemu_driver.c: Simplify all migration callbacks.
* src/qemu/qemu_migration.c (qemuMigrationConfirm): Fix regression.
The previous patches only cleaned up ATTRIBUTE_UNUSED flags cases;
auditing the drivers found other places where flags was being used
but not validated. In particular, domainGetXMLDesc had issues with
clients accepting a different set of flags than the common
virDomainDefFormat helper function.
* src/conf/domain_conf.c (virDomainDefFormat): Add common flag check.
* src/uml/uml_driver.c (umlDomainAttachDeviceFlags)
(umlDomainDetachDeviceFlags): Reject unknown
flags.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc)
(vboxDomainAttachDeviceFlags)
(vboxDomainDetachDeviceFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainMemoryPeek): Likewise.
(qemuDomainGetXMLDesc): Document common flag handling.
* src/libxl/libxl_driver.c (libxlDomainGetXMLDesc): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetXMLDesc): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetXMLDesc): Likewise.
* src/phyp/phyp_driver.c (phypDomainGetXMLDesc): Likewise.
* src/test/test_driver.c (testDomainGetXMLDesc): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainGetXMLDesc): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetXMLDesc): Likewise.
If the server succesfully validates the client cert, it will send
back a single byte, under TLS. If it fails, it will close the
connection. In this case, we were just reporting the standard
I/O error. The original RPC code had a special case hack for the
GNUTLS_E_UNEXPECTED_PACKET_LENGTH error code to make us report
a more useful error message
* src/rpc/virnetclient.c: Return ENOMSG if we get
GNUTLS_E_UNEXPECTED_PACKET_LENGTH
* src/rpc/virnettlscontext.c: Report cert failure if we
see ENOMSG
Many volume operations will fail if the volume in question is being
allocated. These operations were returning VIR_ERR_INTERNAL_ERROR
when they should be returning VIR_ERR_OPERATION_INVALID.
This patch extends qemudDomainSetVcpusFlags() function to support
VIR_DOMAIN_AFFECT_CURRENT flag.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch extends virDomainSetVcpusFlags API to support
VIR_DOMAIN_AFFECT_CURRENT flag.
Now because most APIs accept VIR_DOMAIN_AFFECT_CURRENT flags,
virDomainSetVcpusFlags API should also do.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Rather than trying to clean up the ssh child ourselves, and risk
subtle differences from the socket creation error path, we can
just use the new APIs.
* src/rpc/virnetsocket.c (virNetSocketFree): Use new function.
By requesting the pid in virCommandRunAsync, fdstream was claiming
that it would manually wait for the process. But on the failure
path, the child process was being leaked.
* src/fdstream.c (virFDStreamOpenFileInternal): Auto-reap child.
When using virCommandRunAsync and saving the pid for later, it
is useful to be able to reap that pid in the same way that it
would have been auto-reaped by virCommand if we had passed
NULL for the pid argument in the first place.
* src/util/command.c (virPidWait, virPidAbort): New functions,
created from...
(virCommandWait, virCommandAbort): ...bodies of these.
(includes): Drop duplicate <stdlib.h>. Ensure that our pid_t
assumptions hold.
(virCommandRunAsync): Improve documentation.
* src/util/command.h (virPidWait, virPidAbort): New prototypes.
* src/libvirt_private.syms: Export them.
* docs/internals/command.html.in: Document them.
In the Ubuntu development release we recently got a new udev that
moves /var/run to /run, /var/lock to /run/lock and /dev/shm to /run/shm.
This change in udev requires updating the apparmor security driver in
libvirt[1].
Attached is a patch that:
* adjusts src/security/virt-aa-helper.c to allow both
LOCALSTATEDIR/run/libvirt/**/%s.pid and /run/libvirt/**/%s.pid. While
the profile is not as precise, LOCALSTATEDIR/run/ is typically a symlink
to /run/ anyway, so there is no additional access (remember that
apparmor resolves symlinks, which is why this is still required even
if /var/run points to /run).
* adjusts example/apparmor/libvirt-qemu paths for /dev/shm
[1]https://launchpad.net/bugs/810270
--
Jamie Strandboge | http://www.canonical.com
Similar to the recent qemu_protocol-structs addition.
* src/virnetprotocol-structs: New file.
* src/Makefile.am (%_protocol-structs): Factor body...
(PDWTAGS): ...into new helper macro.
(virnetprotocol-structs): New rule.
(PROTOCOL_STRUCTS): Add virnetprotocol-structs.
Getting metadata on storage allocates a memory (path) which need to
be freed after use otherwise it gets leaked. This means after use of
virStorageFileGetMetadataFromFD or virStorageFileGetMetadata one
must call virStorageFileFreeMetadata to free it. This function frees
structure internals and structure itself.
When qemuMonitorCloseFileHandle is called in error path, we need to
preserve the original error since a possible further error when running
closefd monitor command is not very useful to users.
When creating new qemu process we saved domain status XML only after the
process was fully setup and running. In case libvirtd was killed before
the whole process finished, once libvirtd started again it didn't know
anything about the new process and we end up with an orphaned qemu
process. Let's save the domain status XML as soon as we know the PID so
that libvirtd can kill the process on restart.
The compiler might optimize based on our declaration that something
is unused. Putting that declaration in the header risks getting
out of sync with the actual implementation, so it belongs better
only in the .c files. We were mostly compliant, and a new syntax
check will help us in the future.
* cfg.mk (sc_avoid_attribute_unused_in_header): New syntax check.
* src/nodeinfo.h (nodeGetCPUStats, nodeGetMemoryStats): Delete
attribute already present in .c file.
* src/qemu/qemu_domain.h (qemuDomainEventFlush): Likewise.
* src/util/virterror_internal.h (virReportErrorHelper): Parameters
are actually used by .c file.
* src/xenxs/xen_sxpr.h (xenFormatSxprDisk): Adjust prototype.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk): Delete unused argument.
(xenFormatSxpr): Adjust caller.
* src/xen/xend_internal.c (xenDaemonAttachDeviceFlags)
(xenDaemonUpdateDeviceFlags): Likewise.
Suggested by Daniel Veillard.
For static functions not used as callbacks, there's no need to
keep an unused parameter.
* src/conf/domain_conf.c (virDomainChrDefParseTargetXML)
(virDomainTimerDefParseXML, virDomainHostdevSubsysUsbDefParseXML)
(virDomainVcpuPinDefParseXML): Drop unused parameter.
(virDomainChrDefParseXML, virDomainDefParseXML)
(virDomainHostdevDefParseXML): Update callers.
(virDomainNetDefParseXML): Mark flags used.
In 2f4d2496a8 I didn't notice that one
part of virFileOpenAs doesn't actually call to virFileOpenAsNoFork but
rather includes a copy of the code from there.
No need to repeat common code.
* bootstrap.conf (gnulib_modules): Import calloc-posix.
* src/util/bridge.c (brInit): Use virSetCloseExec.
(brSetInterfaceUp): Adjust flags name.
* src/uml/uml_driver.c (umlSetCloseExec): Delete.
(umlStartVMDaemon): Use util version instead.
'unsigned a' and 'unsigned int a' are synonyms, but we generally
always spell out the 'int' in that case. Fixing this will avoid
a false positive in the next syntax-check commit.
* src/conf/node_device_conf.h (pci_config_address)
(_virNodeDevCapsDef): Prefer 'unsigned int' over 'unsigned'.
* src/xenapi/xenapi_driver.c (xenapiOpen, xenapiDomainReboot):
Reject unknown flags.
(xenapiDomainGetXMLDesc): Likewise, and pass known flags through
to XML generation.
* src/lxc/lxc_driver.c (lxcOpen, lxcDomainSetMemoryParameters)
(lxcDomainGetMemoryParameters): Reject unknown flags.
* src/lxc/lxc_container.c (lxcContainerStart): Rename flags to
cflags to reflect that it is not tied to libvirt.
Like commit 1740c381, but for libvirt-qemu.
* src/remote/qemu_protocol.x (qemu_monitor_command_args): Adjust
type to match API.
* src/qemu_protocol-structs: Update accordingly.
Continuation of commit 313ac7fd, and enforce things with a syntax
check.
Technically, virNetServerClientCalculateHandleMode is not printing
a mode_t, but rather a collection of VIR_EVENT_HANDLE_* bits;
however, these bits are < 8, so there is no different in the
output, and that was the easiest way to silence the new syntax check.
* cfg.mk (sc_flags_debug): New syntax check.
(exclude_file_name_regexp--sc_flags_debug): Add exemptions.
* src/fdstream.c (virFDStreamOpenFileInternal): Print flags in
hex, mode_t in octal.
* src/libvirt-qemu.c (virDomainQemuMonitorCommand)
(virDomainQemuAttach): Likewise.
* src/locking/lock_driver_nop.c (virLockManagerNopInit): Likewise.
* src/locking/lock_driver_sanlock.c (virLockManagerSanlockInit):
Likewise.
* src/locking/lock_manager.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_monitor.c: Likewise.
* src/rpc/virnetserverclient.c
(virNetServerClientCalculateHandleMode): Print mode with %o.
I got bit in a debugging session on an uninstalled libvirtd; the
code tried to call out to the installed $LIBEXECDIR/libvirt_iohelper
instead of my just-built version. So I set a breakpoint and altered
the binary name to be "./src/libvirt_iohelper", and it still failed
because I don't have "." on my PATH.
According to POSIX, execvp only searches PATH if the name does
not contain a slash. Since we are trying to mimic that behavior,
an anchored name should be relative to the current working dir.
This tightens existing behavior, but most callers already pass
an absolute name or a name with no slashes, so it probably won't
be noticeable.
* src/util/util.c (virFindFileInPath): Anchored relative names do
not invoke a PATH search.
When replacing the default SEGV/ABORT/BUS signal handlers you
can't rely on the process being terminated after your custom
handler runs. It is neccessary to manually restore the default
handler and then re-raise the signal
* src/rpc/virnetserver.c: Restore default handler and raise
signal
When monitor is entered with qemuDomainObjEnterMonitorWithDriver, the
correct method for leaving and unlocking the monitor is
qemuDomainObjExitMonitorWithDriver.
Most of the code in these two functions is supposed to be identical but
currently it isn't (which is natural since the code is duplicated).
Let's move common parts of these functions into qemuMigrationPrepareAny.
This also fixes qemuMigrationPrepareTunnel which didn't store received
lockState in the domain object.
Asynchronous jobs may take long time to finish and may consist of
several phases which we need to now about to help with recovery/rollback
after libvirtd restarts.
Query commands are safe to be called during long running jobs (such as
migration). This patch makes them all work without the need to
special-case every single one of them.
The patch introduces new job.asyncCond condition and associated
job.asyncJob which are dedicated to asynchronous (from qemu monitor
point of view) jobs that can take arbitrarily long time to finish while
qemu monitor is still usable for other commands.
The existing job.active (and job.cond condition) is used all other
synchronous jobs (including the commands run during async job).
Locking schema is changed to use these two conditions. While asyncJob is
active, only allowed set of synchronous jobs is allowed (the set can be
different according to a particular asyncJob) so any method that
communicates to qemu monitor needs to check if it is allowed to be
executed during current asyncJob (if any). Once the check passes, the
method needs to normally acquire job.cond to ensure no other command is
running. Since domain object lock is released during that time, asyncJob
could have been started in the meantime so the method needs to recheck
the first condition. Then, normal jobs set job.active and asynchronous
jobs set job.asyncJob and optionally change the list of allowed job
groups.
Since asynchronous jobs only set job.asyncJob, other allowed commands
can still be run when domain object is unlocked (when communicating to
remote libvirtd or sleeping). To protect its own internal synchronous
commands, the asynchronous job needs to start a special nested job
before entering qemu monitor. The nested job doesn't check asyncJob, it
only acquires job.cond and sets job.active to block other jobs.
EnterMonitor and ExitMonitor methods are very similar to their
*WithDriver variants; consolidate them into EnterMonitorInternal and
ExitMonitorInternal to avoid (mainly future) code duplication.
The UML inotify handler would kill off guests when certain
conditions arise, but it forgot to remove transient guests
from the list of domains
* src/uml/uml_driver.c: Cleanup transient guests
Since a host can run several different virtualization types at
the same time, audit messages should allow domains to be identified.
Add a 'virt={qemu,kvm,uml,lxc,...}' key to domain audit messages
* src/conf/domain_audit.c: Identify virt type of guest
When passing through filesystems from the host to a guest, the
host filesystem passed must be audited
* src/conf/domain_audit.{c,h}: Add virDomainAuditFS
The LXC and UML drivers can both make use of auditing. Move
the qemu_audit.{c,h} files to src/conf/domain_audit.{c,h}
* src/conf/domain_audit.c: Rename from src/qemu/qemu_audit.c
* src/conf/domain_audit.h: Rename from src/qemu/qemu_audit.h
* src/Makefile.am: Remove qemu_audit.{c,h}, add domain_audit.{c,h}
* src/qemu/qemu_audit.h, src/qemu/qemu_cgroup.c,
src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c: Update for changed audit API names
Given a PID, the QEMU driver reads /proc/$PID/cmdline and
/proc/$PID/environ to get the configuration. This is fed
into the ARGV->XML convertor to build an XML configuration
for the process.
/proc/$PID/exe is resolved to identify the full command
binary path
After checking for name/uuid uniqueness, an attempt is
made to connect to the monitor socket. If successful
then 'info status' and 'info kvm' are issued to determine
whether the CPUs are running and if KVM is enabled.
* src/qemu/qemu_driver.c: Implement virDomainQemuAttach
* src/qemu/qemu_process.h, src/qemu/qemu_process.c: Add
qemuProcessAttach to connect to the monitor of an
existing QEMU process
When attaching to an external QEMU process, it is neccessary
to check if the process is using KVM or not. This can be done
using a monitor command
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
API for checking if KVM is enabled
To enable attaching to externally launched QEMU, we need
to be able to reverse engineer a guest XML config based
on the argv for a PID in /proc
* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Add
qemuParseCommandLinePid which extracts QEMU config from
argv in /proc, given a PID number
When converting QEMU argv into a virDomainDefPtr, also extract
the pidfile, monitor character device config and the monitor
mode.
* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Extract
pidfile & monitor config from QEMU argv
* src/qemu/qemu_driver.c, tests/qemuargv2xmltest.c: Add extra
params when calling qemuParseCommandLineString
Avoid re-formatting the pidfile path everytime we need it. Create
it once when starting the guest, and preserve it until the guest
is shutdown.
* src/libvirt_private.syms, src/util/util.c,
src/util/util.h: Add virFileReadPidPath
* src/qemu/qemu_domain.h: Add pidfile field
* src/qemu/qemu_process.c: Store pidfile path in qemuDomainObjPrivate
This tweaks the RPC generator to cope with some naming
conventions used for the QEMU specific APIs
* daemon/remote.c: Server side dispatcher
* src/remote/remote_driver.c: Client side dispatcher
* src/remote/qemu_protocol.x: Wire protocol definition
* src/rpc/gendispatch.pl: Use '$structprefix' in method
names, fix QEMU flags and fix dispatcher method names
Introduce a new API in libvirt-qemu.so
virDomainPtr virDomainQemuAttach(virConnectPtr domain,
unsigned long long pid,
unsigned int flags);
This allows libvirtd to attach to an existing, externally
launched QEMU process. This is useful for QEMU developers who
prefer to launch QEMU themselves for debugging/devel reasons,
but still want the benefit of libvirt based tools like
virt-top, virt-viewer, etc
* include/libvirt/libvirt-qemu.h: Define virDomainQemuAttach
* src/driver.h, src/libvirt-qemu.c, src/libvirt_qemu.syms:
Driver glue for virDomainQemuAttach
Set StrictHostKeyChecking=no to auto-accept new ssh host keys if the
no_verify extra parameter was specified. This won't disable host key
checking for already known hosts. Includes a test and documentation.
Since we are going to add some libvirt-qemu.so entry points in
0.9.4, we might as well start checking for RPC stability, just
as for libvirt.so.
* src/Makefile.am (PROTOCOL_STRUCTS): New variable.
(remote_protocol-structs): Rename...
(%_protocol-structs): ...and make more generic.
* src/qemu_protocol-structs: New file.
log2() is heavy when ffs() can do the same thing. But ffs()
requires gnulib support for mingw.
This patch solves this linker error on Fedora 14.
/usr/bin/ld: libvirt_lxc-domain_conf.o: undefined reference to symbol 'log2@@GLIBC_2.2.5'
/usr/bin/ld: note: 'log2@@GLIBC_2.2.5' is defined in DSO /lib64/libm.so.6 so try adding it to the linker command line
/lib64/libm.so.6: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
* .gnulib: Update to latest, for ffs.
* bootstrap.conf (gnulib_modules): Import ffs.
* src/conf/domain_conf.c (virDomainDefParseXML): Use ffs instead
of log2.
Reported by Dave Allan.
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.
Add a check for the expected domain types to the virDomainDefParse*
functions.
Detected in valgrind run:
==9184== 1 bytes in 1 blocks are definitely lost in loss record 1 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF97C9: xdr_remote_domain_get_security_label_ret (remote_protocol.c:1696)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF71C6: remoteDomainGetSecurityLabel (remote_driver.c:1580)
==9184== by 0x4CCA480: virDomainGetSecurityLabel (libvirt.c:7340)
==9184== by 0x41993A: cmdDominfo (virsh.c:2414)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 2 bytes in 1 blocks are definitely lost in loss record 2 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF974F: xdr_remote_node_get_security_model_ret (remote_protocol.c:1713)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184== by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184== by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 8 bytes in 1 blocks are definitely lost in loss record 3 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF9729: xdr_remote_node_get_security_model_ret (remote_protocol.c:1710)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184== by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184== by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== LEAK SUMMARY:
==9184== definitely lost: 11 bytes in 3 blocks
* src/remote/remote_driver.c: Avoid leak on remoteDomainGetSecurityLabel
and remoteNodeGetSecurityModel.
Kernel cmdline args can be passed to xen pv domains even when a
bootloader is specified. The current config-to-sxpr mapping
ignores cmdline when bootloader is present.
Since the xend sub-driver is used with many xen toolstack versions,
this patch takes conservative approach of adding an else block to
existing !def->os.bootloader, and only appends sxpr if def->os.cmdline
is non-NULL.
V2: Fix existing testcase broken by this patch and add new testcases
If virDomainSaveConfig() failed, we will return NULL to source,
and the vm is still available to restart during confirm() step in
v3 protocol. So we should kill it off in qemuMigrationFinish().
In v2 protocol, we should not set vm to NULL, because we hold
a reference of vm and should unrefernce it.
This patch creates new <bios> element which, at this time has only the
attribute useserial='yes|no'. This attribute allow users to use
Serial Graphics Adapter and see BIOS messages from the very first moment
domain boots up. Therefore, users can choose boot medium, set PXE, etc.
The dispatch for the CLOSE RPC call was invoking the method
virNetServerClientClose(). This caused the client connection
to be immediately terminated. This meant the reply to the
final RPC message was never sent. Prior to the RPC rewrite
we merely flagged the connection for closing, and actually
closed it when the next RPC call dispatch had completed.
* daemon/remote.c: Flag connection for a delayed close
* daemon/stream.c: Update to use new API for closing
failed connection
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h:
Add support for a delayed connection close. Rename the
virNetServerClientMarkClose method to virNetServerClientImmediateClose
to clarify its semantics
When closing a remote connection we issue a (fairly pointless)
'CLOSE' RPC call to the daemon. If this fails we skip all the
cleanup of private data, but the virConnectPtr object still
gets released as normal. This causes a memory leak. Since the
CLOSE RPC call is pretty pointless, just carry on freeing the
remote driver if it fails.
* src/remote/remote_driver.c: Ignore failure to issue CLOSE
RPC call
When sending back the final OK or ERROR message on completion
of a stream, we were not decrementing the 'nrequests' tracker
on the client. With the default requests limit of '5', this
meant once a client had created 5 streams, they are unable to
process any further RPC calls. There was also a bug when
handling an error from decoding a message length header, which
meant a client connection would not immediately be closed.
* src/rpc/virnetserverclient.c: Fix release of request after
stream completion & mark client for close on error
In one exit path we forgot to free the virNetMessage object causing
a large memory leak for streams which send a lot of data. Some other
paths were calling VIR_FREE directly instead of virNetMessageFree
although this was (currently) harmless.
* src/rpc/virnetclientstream.c: Fix leak of msg object
* src/rpc/virnetclientprogram.c: Call virNetMessageFree instead
of VIR_FREE
The virNetTLSContextNew was being passed key/cert parameters in
the wrong order. This wasn't immediately visible because if
virNetTLSContextNewPath was used, a second bug reversed the order
of those parameters again.
Only if the paths were manually specified in /etc/libvirt/libvirtd.conf
did the bug appear
* src/rpc/virnettlscontext.c: Fix order of params passed to
virNetTLSContextNew
This option accepts 3 values:
-keep, to keep current client connected (Spice+VNC)
-disconnect, to disconnect client (Spice)
-fail, to fail setting password if there is a client connected (Spice)
When virFileOpenAs is called with VIR_FILE_OPEN_AS_UID flag and uid/gid
different from root/root while libvirtd is running as root, we fork a
new child, change its effective UID/GID to uid/gid and run
virFileOpenAsNoFork. It doesn't make any sense to fchown() the opened
file in this case since we already know that uid/gid can access the file
when open succeeds and one of the following situations may happen:
- the file is already owned by uid/gid and we skip fchown even before
this patch
- the file is owned by uid but not gid because it was created in a
directory with SETGID set, in which case it is desirable not to change
the group
- the file may be owned by a completely different user and/or group
because it was created on a root-squashed or even all-squashed NFS
filesystem, in which case fchown would most likely fail anyway
Add libvirt support for MicroBlaze architecture as a QEMU target. Based on mips/mipsel pattern.
Signed-off-by: John Williams <john.williams@petalogix.com>
No caller was using the flags argument, and this function is internal
only, so we might as well skip it.
* src/util/util.h (safezero): Update signature.
* src/util/util.c (safezero): Update function.
* src/locking/lock_driver_sanlock.c
(virLockManagerSanlockSetupLockspace)
(virLockManagerSanlockCreateLease): Update all callers.
* src/storage/storage_backend.c (createRawFile): Likewise.
Most APIs use 'unsigned int flags'; but a few stragglers were using
a signed value. In particular, the vir*GetXMLDesc APIs were
split-brain, with inconsistent choice of types. Although it is
an API break to use 'int' instead of 'unsigned int', it is ABI
compatible (pre-compiled apps will have no difference in behavior),
and generally apps can be recompiled without any issue (only rare
apps that compiled with extremely high warning levels, or which
pass libvirt API around as typed function pointers, would have to
make any code changes to deal with the change).
The migrate APIs use 'unsigned long flags', which can't be changed,
due to ABI constraints.
This patch intentionally touches only the public API, to prove the
claim that most existing code (including driver callbacks and virsh)
still compiles just fine in spite of the type change.
* include/libvirt/libvirt.h.in (virConnectOpenAuth)
(virDomainCoreDump, virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc): Use unsigned int for flags.
(virDomainHasCurrentSnapshot): Use consistent spelling.
* src/libvirt.c (virConnectOpenAuth, virDomainCoreDump)
(virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc, do_open): Update accordingly.
The next patch wants to adjust an end pointer to trim trailing
spaces but without modifying the underlying string, but a more
generally useful ability to trim trailing spaces in place is
also worth providing.
* src/util/util.h (virTrimSpaces, virSkipSpacesBackwards): New
prototypes.
* src/util/util.c (virTrimSpaces, virSkipSpacesBackwards): New
functions.
* src/libvirt_private.syms (util.h): Export new functions.
Inspired by a patch by Minoru Usui.
Most clients of virSkipSpaces don't want to omit backslashes.
Also, open-coding the list of spaces is not as nice as using
c_isspace.
* src/util/util.c (virSkipSpaces): Use c_isspace.
(virSkipSpacesAndBackslash): New function.
* src/util/util.h (virSkipSpacesAndBackslash): New prototype.
* src/xen/xend_internal.c (sexpr_to_xend_topology): Update caller.
* src/libvirt_private.syms (util.h): Export new function.
Move stat and mkdir to virFileMakePathHelper.
Also use the stat result to detect whether the existing path
is a directory and set errno accordingly if it's not.
When no <seclabel> is present in the XML, the virDomainSeclabelDef
struct is left as all zeros. Unfortunately, this means it gets setup
as type=dynamic, with relabel=no, which is an illegal combination.
Change the 'bool relabel' attribute in virDomainSeclabelDef to
the inverse 'bool norelabel' so that the default initialization
is sensible
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/security/security_apparmor.c, src/security/security_selinux.c:
Replace 'relabel' with 'norelabel'
Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.
Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.
add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach
Initialize three state value of device driver to 1. This is just for a new call to
qemudNodeDeviceReAttach()
Although most functions with flags check to verify no application is
passing in flag bits that are currently undefined, for some reason
this function wasn't.
* Change all flags args from int to unsigned int
* Allow passing flags in virDomainObjParseFile (and propogate those
flags all the way down the call chain). Previously the flags were
hardcoded (to VIR_DOMAIN_XML_INTERNAL_STATUS) several layers down
the chain. Pass that value in at the one place that is currently
calling virDomainObjParseFile.
virFileMakePath returns an errno value on error, that will never
be negative. An virFileMakePath error would have been ignored here,
instead of being reported correctly.
The struct A {} A; construct triggers a linker error on OSX about
duplicate symbols. This also differs from the common struct style.
Switch to common style to fix this.
Reported by Justin Clift.
Add a new attribute to the <seclabel> XML to allow resource
relabelling to be enabled with static label usage.
<seclabel model='selinux' type='static' relabel='yes'>
<label>system_u:system_r:svirt_t:s0:c392,c662</label>
</seclabel>
* docs/schemas/domain.rng: Add relabel attribute
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parse
the 'relabel' attribute
* src/qemu/qemu_process.c: Unconditionally clear out the
'imagelabel' attribute
* src/security/security_apparmor.c: Skip based on 'relabel'
attribute instead of label type
* src/security/security_selinux.c: Skip based on 'relabel'
attribute instead of label type and fill in <imagelabel>
attribute if relabel is enabled.
Normally the dynamic labelling mode will always use a base
label of 'svirt_t' for VMs. Introduce a <baselabel> field
in the <seclabel> XML to allow this base label to be changed
eg
<seclabel type='dynamic' model='selinux'>
<baselabel>system_u:object_r:virt_t:s0</baselabel>
</seclabel>
* docs/schemas/domain.rng: Add <baselabel>
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parsing
of base label
* src/qemu/qemu_process.c: Don't reset 'model' attribute if
a base label is specified
* src/security/security_apparmor.c: Refuse to support base label
* src/security/security_selinux.c: Use 'baselabel' when generating
label, if available
virStorageBackendCreateRaw: createRawFile already reported the
exact error.
Before the fix:
error: Failed to create vol vol-create.img
error: cannot create path '/var/lib/libvirt/images/vol-create.img': Unknown error 18446744073709551597
After the fix:
error: Failed to create vol vol-create.img
error: cannot fill file '/var/lib/libvirt/images/vol-create.img': No space left on device
Coverity detected that we could crash on bogus input. Meanwhile,
strtok_r is rather heavy compared to strchr.
* src/storage/storage_backend_iscsi.c (virStorageBackendIQNFound):
Check for parse failure, and use lighter-weight functions.
Detected by Coverity. qemuDomainEventQueue requires a non-NULL
pointer; most callers silently drop the event if we encountered
and OOM situation trying to create the event.
* src/qemu/qemu_migration.c (qemuMigrationFinish): Check for OOM.
Coverity noted that most clients reacted to failure to hash; but in
a best-effort kill loop, we can ignore failure.
* src/util/cgroup.c (virCgroupKillInternal): Ignore hash failure.
Coverity noted that 4 out of 5 calls to virNetClientStreamRaiseError
checked the return value. This case expects a particular value, so
warn if our expectations went wrong due to some bug elsewhere.
* src/rpc/virnetclient.c (virNetClientCallDispatchStream): Warn on
unexpected scenario.
Coverity warns if the majority of callers check a function for
errors, but a few don't; but in qemu_audit and qemu_domain, the
choice to not check for failures was safe. In qemu_command, the
failure to generate a uuid can only occur on a bad pointer.
* src/qemu/qemu_audit.c (qemuAuditCgroup): Ignore failure to get
cgroup controller.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitor)
(qemuDomainObjEnterMonitorWithDriver): Ignore failure to get
timestamp.
* src/qemu/qemu_command.c (qemuParseCommandLine): Check for error.
Detected by Coverity. The leak is on an error path, but I'm not
sure whether that path is likely to be triggered in practice.
* src/rpc/virnetserverservice.c (virNetServerServiceAccept): Plug leak.
Spotted by Coverity. If we don't update tmp each time through
the loop, then if the filter being removed was not the head of
the list, we accidentally lose all filters prior to the one we
wanted to remove.
* src/rpc/virnetserverclient.c (virNetServerClientRemoveFilter):
Don't lose unrelated filters.
Detected by Coverity. Some, but not all, error paths were clean;
but they were repetitive so I refactored them.
* src/util/pci.c (pciGetDevice): Plug leak.
To avoid regressions, we let callers specify whether to require a
minor and micro version. Callers that were parsing uname() output
benefit from defaulting to 0, whereas callers that were parsing
version strings from other sources should not change in behavior.
* src/util/util.c (virParseVersionString): Allow caller to choose
whether to fail if minor or micro is missing.
* src/util/util.h (virParseVersionString): Update signature.
* src/esx/esx_driver.c (esxGetVersion): Update callers.
* src/lxc/lxc_driver.c (lxcVersion): Likewise.
* src/openvz/openvz_conf.c (openvzExtractVersionInfo): Likewise.
* src/uml/uml_driver.c (umlGetVersion): Likewise.
* src/vbox/vbox_MSCOMGlue.c (vboxLookupVersionInRegistry):
Likewise.
* src/vbox/vbox_tmpl.c (vboxExtractVersion): Likewise.
* src/vmware/vmware_conf.c (vmwareExtractVersion): Likewise.
* src/xenapi/xenapi_driver.c (xenapiGetVersion): Likewise.
Reported by Matthias Bolte.
According to the automake manual, CPPFLAGS (aka INCLUDES, as spelled
in automake 1.9.6) should only include -I, -D, and -U directives; more
generic directives like -Wall belong in CFLAGS since they affect more
phases of the build process. Therefore, we should be sticking CFLAGS
additions into a CFLAGS container, not a CPPFLAGS container.
* src/Makefile.am (libvirt_driver_vmware_la_CFLAGS): Use AM_CFLAGS.
(INCLUDES): Move CFLAGS items...
(AM_CFLAGS): ...to their proper location.
* python/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
* tests/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
(commandtest_CFLAGS, commandhelper_CFLAGS)
(virnetmessagetest_CFLAGS, virnetsockettest_CFLAGS): Use AM_CFLAGS.
linux 3.0 has no micro version number, and that is causing problems
for virParseVersionString. The patch below should allow for:
major
major.minor
major.minor.micro
If major or minor are not present they just default to zero.
We found this in Ubuntu (https://bugs.launchpad.net/bugs/802977)
Detected by Coverity. No real harm in leaving these, but fixing
them cuts down on the noise for future analysis.
* src/rpc/virnetserver.c (virNetServerAddService): Delete unused
entry.
* src/util/sysinfo.c (virSysinfoRead): Delete dead assignment to
base.
EXTRA_DIST files should unconditionally be part of the tarball,
rather than depending on the presence of sanlock-devel.
Meanwhile, parallel builds could fail if we don't use mkdir -p.
* src/Makefile.am (EXTRA_DIST): Always ship sanlock .aug and
template .conf files.
(%-sanlock.conf): Use MKDIR_P.
Detected by Coverity. Both are instances of bad things happening
if pipe2 fails; the virNetClientNew failure could free garbage,
and virNetSocketNewConnectCommand could close random fds.
Note: POSIX doesn't guarantee the contents of fd[0] and fd[1]
after pipe failure: http://austingroupbugs.net/view.php?id=467
We may need to introduce a virPipe2 wrapper that guarantees
that on pipe failure, the fds are explicitly set to -1, rather
than our current state of assuming the fds are unchanged from
their value prior to the failed pipe call.
* src/rpc/virnetclient.c (virNetClientNew): Initialize variable.
* src/rpc/virnetsocket.c (virNetSocketNewConnectCommand):
Likewise.
The virDomainMigratePrepareTunnel3 impl in the remote driver
was using the procedure number for the virDomainMigratePrepareTunnel
method. This doesn't work out so well, because it makes the server
ignore & drop all stream packets
* src/remote/remote_driver.c: Fix procedure for PrepareTunnel3
We ignore any stream data packets which come in for streams which
are not registered, since these packets are async and do not have
a reply. If we get a stream control packet though we must send back
an actual error, otherwise a (broken) client may hang forever
making it hard to diagnose the client bug.
* src/rpc/virnetserverprogram.c: Send back error for unexpected
stream control messages
If a message packet for a invalid stream is received it is just
free'd. This is not good because it doesn't let the client RPC
request counter decrement. If a stream is shutdown with pending
packets the message also isn't released properly because of an
incorrect header type
* daemon/stream.c: Fix message header type
* src/rpc/virnetserverprogram.c: Send dummy reply instead of
free'ing ignored stream message
The qemudDomainSaveFlag method will call EndJob on the 'vm'
object it is passed in. This can result in the 'vm' object
being free'd if the last reference is removed. Thus no caller
of 'qemudDomainSaveFlag' must *ever* reference 'vm' again
upon return.
Unfortunately qemudDomainSave and qemuDomainManagedSave
both call 'virDomainObjUnlock', which can result in a
crash. This is non-deterministic since it involves a race
with the monitor I/O thread.
Fix this by making qemudDomainSaveFlag responsible for
calling virDomainObjUnlock instead.
* src/qemu/qemu_driver.c: Fix potential use after free
when saving guests
The 'char control[CMSG_SPACE(sizeof(int))];' was not being
wiped, so could potentially contain uninitialized bytes.
While this was harmless in this case, it caused complaints
from valgrind
* src/qemu/qemu_monitor.c: memset 'control' variable
in qemuMonitorIOWriteWithFD
The event handler functions do not free the virJSONValuePtr
object. Every event received from a VM thus caused a memory
leak
* src/qemu/qemu_monitor_json.c: Fix leak of event object
The 'function' field in the PCI address was not correctly
initialized, so it was building the wrong address address
string and so not removing all functions from the in use
list.
* src/qemu/qemu_command.c: Fix initialization of PCI function
When adding a callback to an FD stream, we take an extra reference
on the virStreamPtr instance. We forgot to registered a free function
with the callback, so when the callback was removed, the extra
reference held on virStreamPtr was not released.
* src/fdstream.c: Use a free callback to release reference on
virStreamPtr when removing callback
To save on memory reallocation, virNetMessage instances that
have been transmitted, may be reused for a subsequent incoming
message. We forgot to clear out the old data of the message
fully, which caused later confusion upon read.
* src/rpc/virnetserverclient.c: memset entire message before
reusing it
The virNetServerClient object had a hardcoded limit of 10 requests
per client. Extend constructor to allow it to be passed in as a
configurable variable. Wire this up to the 'max_client_requests'
config parameter in libvirtd
* daemon/libvirtd.c: Pass max_client_requests into services
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h: Pass
nrequests_client_max to clients
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h: Allow
configurable request limit
If we pass VIR_DOMAIN_AFFECT_LIVE | VIR_DOMAIN_AFFECT_CONFIG to
qemuGetSchedulerParametersFlags() or *nparams is less than 1,
we will unlock qemu_driver without locking it. It's very dangerous.
We should lock qemu_driver after calling virCheckFlags().
virDomainVcpuPinDefFree() does not free def->cputune.vcpupin if nvcpupin
is 0, and does not set def->cputune.vcpupin to NULL.
If we set nvcpupin to 0 but do not free vcpupin, vcpupin will not be freed
when vm->def is freed.
Use VIR_FREE() instead of virDomainVcpuPinDefFree() to free the memory
and set def->cputune.vcpupint to NULL.
When the remote client receives end of file on the stream
it never invokes the stream callback. Applications relying
on async event driven I/O will thus never see the EOF
condition on the stream
* src/rpc/virnetclient.c, src/rpc/virnetclientstream.c:
Ensure EOF is dispatched
The client stream object can be used independently of the
virNetClientPtr object, so must have full locking of its
own and not rely on any caller.
* src/remote/remote_driver.c: Remove locking around stream
callback
* src/rpc/virnetclientstream.c: Add locking to all APIs
and callbacks
When a filter steals an RPC message, that message must
not be freed, except by the filter code itself
* src/rpc/virnetserverclient.c: Don't free stolen RPC
messages
Improve log messages issued when encountering a bogus
message length to include the actual length and the
limit violated
* src/rpc/virnetmessage.c: Improve log messages
On stream completion it is neccessary to send back a
message with an empty payload. The message header was
not being filled out correctly, since we were not writing
any payload. Add a method for encoding an empty payload
which updates the message headers correctly.
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Add
a virNetMessageEncodePayloadEmpty method
* src/rpc/virnetserverprogram.c: Write empty payload on
stream completion
The RPC client treats failure to register a socket watch
as non-fatal, since we do not mandate that a libvirt client
application provide an event loop implementation. It is
thus inappropriate to a log a message at VIR_LOG_WARN
* src/rpc/virnetsocket.c: Lower logging level
If a streams error is raised, virNetClientIOEventLoop
returns 0, but an error is set. Check for this and
propagate it if present
* src/rpc/virnetclient.c: Propagate streams error
If a callback being invoked from a stream issues a virStreamAbort
operation, the stream data will be free'd but the callback will
then still try to use this. Delay free'ing of the stream data when
a callback is dispatching
* src/fdstream.c: Delay stream free when callback is active
Although we create a temporary file, it is owned by root:root and have
rights 0600. In case qemu does not run under root, it is unable to write
to that file and thus we transfer 0B sized file.
addnhostsSave and hostsfileSave expect < 0 return value on error from
addnhostsWrite and hostsfileWrite but then pass err instead of -err
to virReportSystemError that expects an errno value.
Also addnhostsWrite returns -ENOMEM and errno, change this to -errno.
addnhostsWrite and hostsfileWrite tried to unlink the tempfile after
renaming it, making both fail on the final step. Remove the unnecessary
unlink calls.
networkSaveDnsmasqHostsfile was added in 8fa9c22142 (Apr 2010).
It has a force flag. If the dnsmasq hostsfile already exists force
needs to be true to overwrite it. networkBuildDnsmasqArgv sets force
to false, networkDefine sets it to true. This results in the
hostsfile being written only in networkDefine in the common case.
If no error occurred networkSaveDnsmasqHostsfile returns true and
networkBuildDnsmasqArgv adds the --dhcp-hostsfile to the dnsmasq
command line.
networkSaveDnsmasqHostsfile was changed in 89ae9849f7 (24 Jun 2011)
to return a new dnsmasqContext instead of reusing one. This change broke
the logic of the force flag as now networkSaveDnsmasqHostsfile returns
NULL on error, but the early return -- if force was not set and the
hostsfile exists -- returns 0. This turned the early return in an error
case and networkBuildDnsmasqArgv didn't add the --dhcp-hostsfile option
anymore if the hostsfile already exists. It did because networkDefine
created the hostsfile already.
Then 9d4e2845d4 fixed the return 0 case in networkSaveDnsmasqHostsfile
but didn't apply the force option correctly to the new addnhosts file.
Now force doesn't control an early return anymore, but influences the
handling of the hostsfile context creation and dnsmasqSave is always
called now. This commit also added test cases that reveal several
problems. First, the tests now calls functions that try to write the
dnsmasq config files to disk. If someone runs this tests as root this
might overwrite actively used dnsmasq config files, this is a no-go. Also
the tests depend on configure --localstatedir, this needs to be fixed as
well, because it makes the tests fail when localstatedir is different
from /var.
This patch does several things to fix this:
1) Move dnsmasqContext creation and saving out of networkBuildDnsmasqArgv
to the caller to separate the command line generation from the config
file writing. This makes the command line generation testable without the
risk of interfering with system files, because the tests just don't call
dnsmasqSave.
2) This refactoring of networkSaveDnsmasqHostsfile makes the force flag
useless as the saving happens somewhere else now. This fixes the wrong
usage of the force flag in combination with then newly added addnhosts
file by removing the force flag.
3) Adapt the wrong test cases to the correct behavior, by adding the
missing --dhcp-hostsfile option. Both affected tests contain DHCP host
elements but missed the necessary --dhcp-hostsfile option.
4) Rename networkSaveDnsmasqHostsfile to networkBuildDnsmasqHostsfile,
because it doesn't save the dnsmasqContext anymore.
5) Move all directory creations in dnsmasq context handling code from
the *New functions to dnsmasqSave to avoid directory creations in system
paths in the test cases.
6) Now that networkBuildDnsmasqArgv doesn't create the dnsmasqContext
anymore the test case can create one with the localstatedir that is
expected by the tests instead of the configure --localstatedir given one.
Detected by gcc -O2, introduced in commit 532ce9c2. If dmidecode
outputs a field unrecognized by the parsers, then the code would
dereference an uninitialized eol variable.
* src/util/sysinfo.c (virSysinfoParseBIOS)
(virSysinfoParseSystem, virSysinfoParseProcessor)
(virSysinfoParseMemory): Avoid uninitialized variable.
