The new command 'virsh blockcommit $dom $disk' requests the start
of an asynchronous commit operation across the entire chain of
$disk. Further arguments can fine-tune which portion of the
chain is committed. Existing 'virsh blockjob' commands can then
track the status, change the bandwidth, or abort the commit job.
With a bit more on the command line, 'virsh blockcommit $dom $disk
--wait --verbose' can be used for blocking behavior, with visual
feedback on the overall status, and can be canceled with Ctrl-C.
The overall design, including the wait loop logic, borrows heavily
from the existing blockpull command.
* tools/virsh-domain.c (cmdBlockCommit): New function.
* tools/virsh.pod (blockcommit): Document it.
New command node-memory-tune to get/set the node memory parameters,
only two parameters are allowed to set (pages_to_scan, and sleep_millisecs,
see documents in this patch for more details).
Example of node-memory-tune's output:
Shared memory:
pages_to_scan 100
sleep_millisecs 20
pages_shared 0
pages_sharing 0
pages_unshared 0
pages_volatile 0
full_scans 0
This introduces four new options for secret-list, to filter the
returned secrets by whether it's ephemeral or not, and/or by
whether it's private or not.
* tools/virsh-secret.c: (New helper vshSecretSorter,
vshSecretListFree, and vshCollectSecretList; Use the new
API for secret-list; error out if flags are specified,
because there is no way to filter the results when using
old APIs (no APIs to get the properties (ephemeral, private)
of a secret yet).
* tools/virsh.pod: Document the 4 new options.
tools/virsh-nwfilter.c:
* vshNWFilterSorter to sort network filters by name
* vshNWFilterListFree to free the network filter objects list.
* vshNWFilterListCollect to collect the network filter objects, trying
to use new API first, fall back to older APIs if it's not supported.
tools/virsh-nodedev.c:
* vshNodeDeviceSorter to sort node devices by name
* vshNodeDeviceListFree to free the node device objects list.
* vshNodeDeviceListCollect to collect the node device objects, trying
to use new API first, fall back to older APIs if it's not supported.
* Change option --cap to accept multiple capability types.
tools/virsh.pod
* Update document for --cap
This improve helper vshStringToArray to accept const string as
argument instead. To not convert the const string when using
vshStringToArray, and thus avoid motifying it.
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
tools/virsh-interface.c:
* vshInterfaceSorter to sort interfaces by name
* vshInterfaceListFree to free the interface objects list.
* vshInterfaceListCollect to collect the interface objects, trying
to use new API first, fall back to older APIs if it's not supported.
tools/virsh-network.c:
* vshNetworkSorter to sort networks by name
* vshNetworkListFree to free the network objects list.
* vshNetworkListCollect to collect the network objects, trying
to use new API first, fall back to older APIs if it's not supported.
* New options --persistent, --transient, --autostart, --no-autostart,
for net-list, and new field 'Persistent' for its output.
tools/virsh.pod:
* Add documents for the new options.
tools/virsh-volume.c:
* vshStorageVolSorter to sort storage vols by name
* vshStorageVolumeListFree to free the volume objects list
* vshStorageVolumeListCollect to collect the volume objects, trying
to use new API first, fall back to older APIs if it's not supported.
When setting the cpu tunables in virsh you are able to update only a
subset of them. Virsh while doing the update updated all of the
tunables, changed ones with new values and unchanged with old ones.
This is unfortunate as it:
a) might overwrite some other change by a race condition (unprobable)
b) fails with range checking as some of the old values saved might be
out of range
This patch changes the update procedure so that only the changed value
is updated on the host.
This patch also fixes a very unprobable memory leak if the daemon would
return a string tunable parameter, as the typed parameter array was not
cleared.
A last minute rename in commit fc122e1a to virsh.h was not properly
reflected when rebasing virsh-pool.c in commit 93a346d.
* tools/virsh-pool.c (vshStoragePoolListCollect): Use VSH_MATCH,
not MATCH.
tools/virsh-pool.c:
* vshStoragePoolSorter to sort the pool list by pool name.
* struct vshStoragePoolList to present the pool list, pool info
is collected by list->poolinfo if 'details' is specified by
user.
* vshStoragePoolListFree to free the pool list
* vshStoragePoolListCollect to collect the pool list, new API
virStorageListAllPools is tried first, if it's not supported,
fall back to older APIs.
* New options --persistent, --transient, --autostart, --no-autostart
and --type for pool-list. --persistent or --transient is to filter
the returned pool list by whether the pool is persistent or not.
--autostart or --no-autostart is to filter the returned pool list
by whether the pool is autostarting or not. --type is to filter
the pools by pool types. E.g.
% virsh pool-list --all --persistent --type dir,disk
tools/virsh.pod:
* Add documentations for the new options.
Move definition of MATCH from virsh-domain-monitor.c into
virsh.h, and rename it as VSH_MATCH for further use.
* tools/virsh-domain-monitor.c: Change MATCH into VSH_MATCH
* tools/virsh.h: Define VSH_MATCH
The storage pool's management doesn't relate with a domain, it
probably was an intention, but not achieved yet. And the fact
is only active pools are listed by default.
Yesterday's commit 15d2c9f pointed out that virsh was still using
localtime(), which is not thread-safe, even though virsh is
definitely multi-threaded. Even if we only ever triggered it from
one thread, it's better safe than sorry for maintenance purposes.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_nonreentrant):
Tighten the rule.
* tools/virsh.c (vshOutputLogFile): Avoid localtime.
(vshEditWriteToTempFile, vshEditReadBackFile, cmdCd, cmdPwd)
(vshCloseLogFile): Avoid strerror.
* tools/console.c (vshMakeStdinRaw): Likewise.
* tools/virsh-domain.c (vshGenFileName): Fix spacing in previous
patch.
On 09/04/2012 08:20 AM, Eric Blake wrote:
> tv_sec is required by POSIX to be
> of type time_t; so this is a bug in the OpenBSD header
> [for declaring it as long]
Most likely this problem arose because of the patch I pushed
in gnulib commit e07d7c40f3ca5ec410cf5aa6fa03cfe51e712039.
Previously, gnulib required timeval's tv_sec to be
the same size as time_t. But now, it requires only that
tv_sec be big enough to hold a time_t.
This patch was needed for Emacs. Without the patch, gnulib
replaced struct timeval on OpenBSD, and this messed up
utimens.c, and Emacs wouldn't build.
Alternatively, gnulib could substitute its own struct timeval
for the system's, wrapping every struct timeval-using function
(gettimeofday, futimesat, futimes, lutimes, etc. That'd be
more work, though. And it would introduce some performance
issues with gettimeofday, which is supposed to be fast.
I've been trying to get away from using struct timeval,
and to use the higher-resolution struct timespec instead,
so messing with these obsolescent interfaces has been
lower priority for me. But if someone wants to take the
more-ambitious approach that'd be fine, I expect.
For this particular case, though, how about if we avoid
the problem entirely? libvirt doesn't need to use struct
timeval here at all. It makes libvirt smaller and probably
faster, and it ports to OpenBSD without messing with gnulib.
Now that vshCommandRun() checks for the connection automaticaly, remove
all of the redundant checks in the code.
vshConnectionUsability() no longer needs to be exported and this patch
marks it static.
Almost each virsh command uses the function vshConnectionUsability
before doing anything, to check if the connection is "alive". Commands
that don't need an conection are already conveniently marked with
VSH_CMD_FLAG_NOCONNECT. We can automaticaly check for the connection
before calling any remote command so we don't forget to do so.
This patch also upgrades the connection check to use virConnectIsAlive
along with the current approach.
When executing virsh -t <command> the reported timing was off
by 3 orders of magnitude if the command took more than one
second.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Although virsh command raises a correct error information, the command status
returns 0(true), this patch is used for fixing this issue.
Signed-off-by: Alex Jia <ajia@redhat.com>
The bandwidth units for blockpull and blockcopy are in Megabytes per
Second, not Megabits per Second.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus
Since the move to systemd libvirt-guests doesn't output this progress
information anymore. This patch brings back this feature.
It is helpful to show the admin what the system is waiting for and what
is left of the timeout (e.g. for calibrating the shutdown timing of a ups).
Rewriting the current line with \r doesn't work anymore in the context
of systemd. So always write new lines, but move to 5 second intervals
to avoid flooding the console.
Last of the file splits.
* tools/virsh-volume.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-volume.c: Likewise.
(vshCommandOptVolBy): Fix flag usage.
Almost done with the splits.
* tools/virsh-snapshot.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-snapshot.c: Likewise.
One of the simpler splits.
* tools/virsh-secret.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-secret.c: Likewise.
More in a series of file splits.
* tools/virsh-pool.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-pool.c: Likewise.
(virCommandOptPoolBy): Fix flag usage.
Yet another split file.
* tools/virsh-nwfilter.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-nwfilter.c: Likewise.
Another worthwhile split, needed one more public function.
* tools/virsh-nodedev.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-nodedev.c: Use new header.
* tools/virsh.c: Likewise.
(vshTreePrint): Export.
* tools/virsh.h (vshTreePrint): Declare.
Another relatively easy file split.
* tools/virsh-network.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-network.c: Likewise.
(vshCommandOptNetworkBy): Update signature.
Another relatively easy split, since helper functions were fixed
in the previous patch.
* tools/virsh-interface.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-interface.c: Likewise.
(vshCommandOptInterfaceBy): Check flags.
In preparation for splitting virsh-interface.c, I found these
functions need to be declared in virsh.h, as well as one that
belongs more properly in virsh-domain.h. Also, since we
use the VSH_BY* flags in more than one function, I improved
how they are used.
* tools/virsh.h (vshNameSorter, vshCmdHasOption): Declare.
(VSH_BYID): Turn into enum.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.h): ...here.
* tools/virsh.c: (vshNameSorter): Export.
(cmd_has_option): Rename...
(vshCmdHasOption): ...and export.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.c (vshCommandOptDomainBy): ...here, adjust
signature, and check flags.
* tools/virsh-network.c (vshCommandOptNetworkBy): Update callers.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh-domain-monitor.c (includes): Likewise.
* tools/virsh-host.c (includes): Likewise.
The splits are getting easier, with fewer cleanups needed in virsh.h.
* tools/virsh-host.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-host.c: Use new header.
* tools/virsh.c: Likewise.
Another file worth compiling on its own instead of by .c inclusion.
* tools/virsh-domain-monitor.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.h (vshGetDomainDescription): Move to correct
header.
* tools/virsh-domain-monitor.c: Use new header.
* tools/virsh.c: Likewise.
* tools/virsh-domain.c: Likewise.
C99 says that __foo naming is reserved for the compiler. Besides,
we had several different styles in use; this consolidates things
to set up the typedefs up front then declare the types with
consistent naming.
* tools/virsh.h: Use consistent struct naming.
* tools/virsh.c (_vshCommandParser): Likewise.
The virsh-domain.c file was pretty self-contained; the only
entry point was the table of command definitions. The bulk
of this patch is making more functions in virsh.c reusable.
A later patch will clean up poor naming choices.
* tools/Makefile.am (virsh_SOURCES): Build virsh-domain.c.
* tools/virsh-domain.h: New file.
* tools/virsh.h (virshReportError, vshResetLibvirtError)
(vshAskReedit, vshStreamSink): Declare.
* tools/virsh.c: Switch from using .c to .h.
(virshReportError, vshResetLibvirtError, vshAskReedit)
(vshStreamSink, prettyCapacity): Export.
(vshCatchInt): Move...
* tools/virsh-domain.c: ...into sole user. Use header.
Having one .c file include another does not give any compilation
benefits; move towards modular .o files by first splitting out
reused declarations into a new virsh.h. This patch doesn't try
very hard to see which functions are used or not, to make it
easier to review the file split. Future patches can further trim
the header to be smaller.
* tools/Makefile.am (virsh_SOURCES): List new file, and prepare
for others.
* tools/virsh.c: Split declarations...
* tools/virsh.h: ...into new file, and make several functions
non-static.
* tools/virsh-domain-monitor.c (vshGetDomainDescription): Make
non-static.
It's easier to order things in topological order than it is to
forward declare in one file for use only by one other file.
* tools/virsh.c (vshWatchJob, parseRateStr)
(vshDomainStateToString, vshDomainStateReasonToString)
(vshDomainControlStateToString, vshDomainVcpuStateToString): Drop
useless prototypes.
* tools/virsh-domain.c (vshWatchJob): Move earlier.
The '#endif' for a WIN32 conditional was placed one function
too high, leaving the impl of the console command enabled
and referencing functions that were disabled
* tools/virsh.c: New macro vshStrcasecmp
* tools/virsh-domain-monitor.c: Use vshStrcasecmp instead of
strcasecmp
* tools/virsh-snapshot.c: Likewise
* cfg.mk: Only avoid doing strcase checking for virsh.c
As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].
* src/Makefile.am:
- Various indention fixes incidentally
- Add macro DATATYPES_SOURCES (datatypes.[ch])
- Link datatypes.[ch] for libvirt_lxc
* src/conf/domain_conf.c:
- Move all the stuffs from virdomainlist.c into it
- Use virUnrefDomain and virUnrefDomainSnapshot instead of
virDomainFree and virDomainSnapshotFree, which are defined
in libvirt.c, and we don't want to link to it.
- Remove "if" before "free" the object, as virObjectUnref
is in the list "useless_free_options".
* src/conf/domain_conf.h:
- Move all the stuffs from virdomainlist.h into it
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
* src/libxl/libxl_driver.c:
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
- no (include "virdomainlist.h")
* src/libxl/libxl_driver.c: Likewise
* src/lxc/lxc_driver.c: Likewise
* src/openvz/openvz_driver.c: Likewise
* src/parallels/parallels_driver.c: Likewise
* src/qemu/qemu_driver.c: Likewise
* src/test/test_driver.c: Likewise
* src/uml/uml_driver.c: Likewise
* src/vbox/vbox_tmpl.c: Likewise
* src/vmware/vmware_driver.c: Likewise
* tools/virsh-domain-monitor.c: Likewise
* tools/virsh.c: Likewise
Similar to the previous patch, prepending 'help' to a partial
command string doesn't cut us any slack.
$ virsh help pool-define-as --name foo --type dir
error: command 'help' doesn't support option --name
This patch adds a few hacks to make 'help' ignore everything after the
first data bit, so the above command shows help output for pool-define-as.
Often times I find myself halfway through typing a long command when
I want to see 'help' output. I instinctively append '--help' to the
command I'm typing, only to get an error:
$ virsh vol-create-as foo --help
error: command 'vol-create-as' doesn't support option --help
This patch makes --help work in a pretty hacky way. One missing piece
here is that --help isn't listed as an option in the actual 'help <cmd>'
output, but maybe this can be a starting point for someone.
For some reason I only get this after applying subsequent upcoming
patches that touch virsh, but don't seem to actually cause the warning.
virsh.c: In function ‘vshCommandParse’:
virsh.c:2014:46: error: ‘opt_index’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
cc1: all warnings being treated as errors
List:
- some old libvir/libvirt rename leftovers (the only problem can be
if somebody parses 'virsh version' output really badly)
- remove pointless tags specified in some pages that are not used
I originally postet this into the Fedora bugzilla
https://bugzilla.redhat.com/show_bug.cgi?id=843836
Currently gracefully shutting down guest vms on host shutdown does not work on
Fedora 17, the guests are killed hard on system shutdown.
The reason is systemd considers libvirt-guests.service to be stopped when the
system is running:
$ systemctl status libvirt-guests.service
libvirt-guests.service - Suspend Active Libvirt Guests
Loaded: loaded (/usr/lib/systemd/system/libvirt-guests.service;
enabled)
Active: deactivating (stop) since Fri, 27 Jul 2012 15:47:31 +0200;
2min 48s ago
Process: 1085 ExecStart=/etc/init.d/libvirt-guests start
(code=exited, status=0/SUCCESS)
Control: 1150 (libvirt-guests)
CGroup: name=systemd:/system/libvirt-guests.service
└ control
├ 1150 /bin/sh /etc/init.d/libvirt-guests stop
└ 2257 sleep 1
libvirt-guests.service is defined as type "simple" in systemd (the default).
That means systemd will shut down the service when the start executable is
terminated after starting is done. Systemd will not call stop again on system
shutdown because it thinks it is already stopped.
The solution is to define it as type "oneshot" and set the flag
"RemainAfterExit". Then systemd will consider the service as active after
startup and will call the stop function on host shutdown.
This is a follow up patch of commit f9ce7dad6, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.
And deserts the outdated comments like:
* libvirt-qemu.h:
* Summary: qemu specific interfaces
* Description: Provides the interfaces of the libvirt library to handle
* qemu specific methods
*
* Copy: Copyright (C) 2010, 2012 Red Hat, Inc.
Uses the more compact style like:
* libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
*
* Copyright (C) 2010, 2012 Red Hat, Inc.
On some fallback paths in virsh, error reported by the previously failed
API is cleared by virResetLastError() that doesn't free error stored by
virsh. This patch changes this to clear it using vshResetLibvirtError().
Virsh uses an error handler to save errors from libvirt. On some code
paths it's needed to clear libvirt errors and continue on fallback code
paths without reporting failure.
This patch adds function vshResetLibvirtError() that clears error
returned by libvirt and updates all places where the old two-line method
was used.
When undefining a domain and removing associated storage using "virsh
undefine --storage" the domain was at first undefined and after that the
storage removal proces was started. If the user specified an invalid
disk to remove, the error could not be corrected.
This patch moves enumeration and filtering of volumes that should be
removed before the domain is undefined, but the removal process is still
kept after the domain has been undefined.
Change the permissible minimum value of nodesuspend duration time
to 60 seconds. If option is less than the value, reports error.
Update virsh help and manpage the infomation.
Commands in node device group moved from virsh.c to virsh-nodedev.c,
* virsh.c: Remove commands in node device group.
* virsh-nodedev.c: New file, filled with commands in node device group
* po/POTFILES.in: Add virsh-nodedev.c
* cfg.mk: Skip to check config.h including for virsh-nodedev.c
Commands in host group moved from virsh.c to virsh-host.c,
* virsh.c: Remove commands in host group.
* virsh-host.c: New file, filled with commands in host group
* po/POTFILES.in: Add virsh-host.c
* cfg.mk: Skip to check config.h including for virsh-host.c
Commands to manage domain snapshot are moved from virsh.c to
virsh-snapshot.c.
* virsh.c: Remove domain snapshot commands.
* virsh-snapshot.c: New file, filled with domain snapshot commands.
* po/POTFILES.in: Add virsh-snapshot.c
* cfg.mk: Skip strcase and config.h including checking for
virsh-snapshot.c
Commands to manage secret are moved from virsh.c to virsh-secret.c,
with a few helpers for secret command use.
* virsh.c: Remove secret commands and a few helpers.
(vshCommandOptSecret, and vshCommandOptSecretBy)
* virsh-secret.c: New file, filled with secret commands and its helpers.
* po/POTFILES.in: Add virsh-secret.c
* cfg.mk: Skip to check config.h including for virsh-secret.c
Commands to manage network filter are moved from virsh.c to virsh-nwfilter.c,
with a few helpers for network filter command use.
* virsh.c: Remove network filter commands and a few helpers.
(vshCommandOptNWFilter, and vshCommandOptNWFilterBy)
* virsh-nwfilter.c: New file, filled with network filter commands and its helpers.
* po/POTFILES.in: Add virsh-nwfilter.c
* cfg.mk: Skip to check config.h including for virsh-nwfilter.c
Commands to manage host interface are moved from virsh.c to
virsh-interface.c, with a few helpers for interface command use.
* virsh.c: Remove interface commands and a few helpers.
(vshCommandOptInterface, vshCommandOptInterfaceBy)
* virsh-interface.c: New file, filled with interface commands and
its helpers.
* cfg.mk: Skip to check config.h including for virsh-interface.c
* po/POTFILES.in: Add virsh-interface.c
Commands to manage network are moved from virsh.c to virsh-network.c,
with a few helpers for network command use.
* virsh.c: Remove network commands and a few helpers.
* virsh-network.c: New file, filled with network commands and its
helpers.
* po/POTFILES.in: Add virsh-network.c
* cfg.mk: Skip to check config.h including for virsh-network.c
This splits commands of storage pool group into virsh-pool.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.
* tools/virsh.c:
Remove commands for storage storage pool and a few helpers.
(vshCommandOptVol, vshCommandOptVolBy).
* tools/virsh-pool.c:
New file, filled with commands of storage pool group and its
helpers.
* po/POTFILES.in:
Add virsh-pool.c
* cfg.mk:
Skip to check config.h including for virsh-pool.c
This splits commands of storage volume group into virsh-volume.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.
* tools/virsh.c:
Remove commands for storage storage volume and a few helpers.
(vshCommandOptVol, vshCommandOptVolBy).
* tools/virsh-volume.c:
New file, filled with commands of storage volume group and its
helpers.
* po/POTFILES.in:
Add virsh-volume.c
* cfg.mk:
Skip to check config.h including for virsh-volume.c
This splits commands to manage domain into virsh-domain.c,The helpers
not for common use are moved into them too. Standard copyright is added
for the new file.
* tools/virsh.c:
- Remove commands for domain group, and one helper
(vshDomainVcpuStateToString)
- vshStreamSink is moved before commands's definition for it's
also used by commands not of domain group, such as volUpload.
* tools/virsh-domain.c:
- New file, commands for domain group and the one helper are
moved into it.
* po/POTFILES.in:
- Add virsh-domain.c
* cfg.mk:
- Skip to check config.h including for virsh-domain.c
This splits commands commands to monitor domain status into
virsh-domain-monitor.c. The helpers not for common use are moved too.
Standard copyright is added.
* tools/virsh.c:
- Remove commands for domain monitoring group and a few helpers (
vshDomainIOErrorToString, vshGetDomainDescription,
vshDomainControlStateToString, vshDomainStateToString) not for
common use.
- Remove (incldue "intprops.h").
* tools/virsh-domain-monitor.c:
- New file, filled with commands of domain monitor group.
- Add "intprops.h".
* cfg.mk:
- Skip strcase checking for virsh-domain-monitor.c
- Skip to check config.h including for virsh-domain-monitor.c
* po/POTFILES.in
- Add virsh-domain-monitor.c
The copyright dates in the manpages haven't been updated in awhile.
Also, when pod2man converts a pod file into a manpage, it will only
remove the extension from the filename if it is ".pod". Some of the
libvirt pod files are named *.pod.in, and that filename is placed
unchanged into the manpage. This patch uses pod2man's --name option to
fix that.
Believe it or not, there's even a BZ for this:
https://bugzilla.redhat.com/show_bug.cgi?id=819364
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
Fix for a minor issue:
the sleep(1) statement was called twice,
effectively doubling the elapsed time
execution "virsh nodecpustats --percent".
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
When --direct is used when migrating a domain running on a hypervisor
that does not support direct migration (such as QEMU), the caller would
get the following error message:
this function is not supported by the connection driver:
virDomainMigrateToURI2
which is a complete nonsense since qemu driver implements
virDomainMigrateToURI2. This patch would emit a more sensible error in
this case:
Requested operation is not valid: direct migration is not supported
by the connection driver
Instead of changing the existed virFileMakePath to accept mode
argument and modifying a pile of its uses, this patch introduces
virFileMakePathWithMode, and use it instead of mkdir() to create
the readline history dir.
In vshSnapshotListCollect() vshCalloc was called with swapped nmemb and
size argument. This caused division by zero in xalloc_oversized as the
macro doesn't expect size to be zero.
Fixed up virsh -V output by removing invalid WITH_PROXY & WITH_ONE
checks, adding several missing checks, and fixing the DTrace check.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
v2:
- Refactored to use virBuffer
- Refactored to use virXPath wrappers
- Added support for tls-port and password for SPICE
- Added optional flag to disable SPICE password to the URI
- Added support for RDP
- Fixed code reviews
Add a new 'domdisplay' command that provides a URI for VNC, SPICE and
RDP connections. Presently the 'vncdisplay' command provides you with
the port info that QEMU is listening on but there is no counterpart for
SPICE and RDP. Additionally this provides you with the bind address as
specified in the XML, which the existing 'vncdisplay' lacks. For SPICE
connections it supports secure and unsecure channels and optionally
providing the password for the SPICE channel.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
The vshPrintRaw function is not used on Win32, and neither
is the 'msg' parameter of vshAskReedit. Change the nesting
of #ifdef WIN32 conditionals to address this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the vncdisplay command to use the virXPath wrappers as well as
check if the domain is up rather than using the port set to -1 to mean
the domain is not up.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
This patch adds a check for the count of processors the user requests
for the guest machine so that invalid values produce a more helpful
error message.
This patch makes use of the newly added api virConnectListAllDomains()
to list domains in virsh.
Virsh now represents lists of domains using an internal structure
vshDomainList. This structure contains the virDomainPtr list as provided
by virConnectListAllDomains() and the count of domains in the list.
For backwards compatibility, the function vshDomainListCollect was added
that tries to enumerate the domains using the new API and if the API is
not supported falls back to the older approach with the two list
functions. The helper function also simulates filtering by all
currently supported flags added with virConnectListAllDomains().
This patch also cleans up the "list" command handler to use the new
helpers and adds new command line flags to make use of filtering.
Previously, to get the name of all snapshots with children, it was
necessary to get the name of all snapshots and then remove the
name of leaf snapshots. This is racy, and somewhat inefficient
compared to planned API additions. We can emulate --no-metadata on
0.9.5-0.9.12, but for now, there is no emulation of --no-leaves.
* tools/virsh.c (cmdSnapshotList): Add new options --no-leaves and
--no-metadata.
(vshSnapshotList): Emulate where possible.
* tools/virsh.pod (snapshot-list): Document them.
Append '(MAC Address)' after the help string of domiftune virsh
command as it takes the same type of argument as domif-{get,set}link
which have it specified.
as we are missing:
attach-disk: --type can accept 'lun' too, not just cdrom or floppy.
attach-disk: --target specify logical device name, not path
attach-interface: --target silently drops strings with vnet* prefix
Operating on a list of snapshot objects looks so much simpler.
In particular, since the helper function already trimmed out
irrelevant entries, we no longer have quite so many special cases
on finding the first snapshot to operate on. Also, vshTreePrint
no longer has a generic callback struct; both clients now pass
something different according to their own needs.
* tools/virsh.c (cmdSnapshotList): Use previous patches.
(vshTreeArrayLookup): Rename...
(vshNodeListLookup): ...now that it only has one client.
(cmdNodeListDevices): Adjust caller.
This patch is based on the fallback code out of cmdSnapshotList,
with tweaks to keep the snapshot objects around rather than just
their name, and to remove unwanted elements before returning.
It looks forward to a future patch when we add a way to list all
snapshot objects at once, and the next patch will simplify
cmdSnapshotList to take advantage of this factorization.
* tools/virsh.c (vshSnapshotList, vshSnapshotListFree): New functions.
Detected by valgrind:
==16217== 1 errors in context 1 of 12:
==16217== Invalid read of size 1
==16217== at 0x4A07804: __GI_strlen (mc_replace_strmem.c:284)
==16217== by 0x3019F167F6: xdr_string (in /lib64/libc-2.12.so)
==16217== by 0x3033709E8D: xdr_remote_nonnull_string (remote_protocol.c:31)
==16217== by 0x303370E5CB: xdr_remote_domain_update_device_flags_args (remote_protocol.c:2028)
==16217== by 0x30337197D1: virNetMessageEncodePayload (virnetmessage.c:341)
==16217== by 0x30337135E1: virNetClientProgramCall (virnetclientprogram.c:327)
==16217== by 0x30336F1EFD: callWithFD (remote_driver.c:4586)
==16217== by 0x30336F1F7B: call (remote_driver.c:4607)
==16217== by 0x30336F42F2: remoteDomainUpdateDeviceFlags (remote_client_bodies.h:2865)
==16217== by 0x30336D46E5: virDomainUpdateDeviceFlags (libvirt.c:9457)
==16217== by 0x41AEE8: cmdChangeMedia (virsh.c:15249)
==16217== by 0x413CB4: vshCommandRun (virsh.c:18669)
==16217== Address 0x4ec5e25 is 0 bytes after a block of size 293 alloc'd
==16217== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==16217== by 0x303364F1DB: virAllocN (memory.c:129)
==16217== by 0x41A844: vshPrepareDiskXML (virsh.c:15043)
==16217== by 0x41AECC: cmdChangeMedia (virsh.c:15246)
==16217== by 0x413CB4: vshCommandRun (virsh.c:18669)
==16217== by 0x423973: main (virsh.c:20261)
There is a little easter egg in virsh: one can easily clone
an object (domain, network, ...). Just 'virsh edit' change the name
and remove <uuid>. And then, in the end when reporting success
the new name was printed out.
However, with recent edit rewrite we lost the final part and are
still printing the original name out.
When printing reedit options we make stdin raw. However,
this results in stdout being raw as well. Therefore we need
to return carriage when doing new line. Unfortunately,
'\r' cannot be part of internationalized messages hence
we must move them to formatting string which then in turn
become huge and disarranged. To solve this, a new function
is introduced which takes variable string arguments and
prepend each with "\r\n" just before printing.
The attach-disk command used with parameter --cache created an invalid
XML snippet as the beginning of the <driver> element was not printed
when used solely with --cache and no other attribute to driver.
commit 52d064f42d added
VIR_NETWORK_XML_INACTIVE in order to allow suppressing the
auto-generated list of VFs in network definitions, and a --inactive
flag to virsh net-dumpxml to take advantage of the flag. However, it
missed out on two opportunities:
1) Use INACTIVE to get the current config of the network as it
exists on disk, rather than the currently active config.
2) Add INACTIVE to the flags used for the virsh net-edit command, so
that it won't include the forward-pool interfaces that were
autogenerated, and so that a re-edit of the network prior to
restarting it will show any other edits made since the last restart
of the network. (prior to this patch, if you edited a network a 2nd
time without restarting, all of the previous edits would magically
disappear).
In order to fit with the new #define-based generic edit function in
virsh.c, a new function vshNetworkGetXMLDesc() was added. This
function first tries to call virNetworkGetXMLDesc with the INACTIVE
flag added, then retries without if the first attempt fails (in the
manner expected when the server doesn't support it).
Expose the recent API additions in virsh. Borrows ideas from 'dominfo'
for the general type of information to display.
Output looks like:
$ tools/virsh snapshot-info fedora-local tmp
Name: tmp
Domain: fedora-local
Current: no
State: disk-snapshot
Parent: -
Children: 1
Descendants: 2
Metadata: yes
possibly with fewer lines when talking to older servers.
* tools/virsh.c (cmdSnapshotInfo): New command.
* tools/virsh.pod (snapshot-info): Document it.
Requiring the user to pass in parallel arrays of names and parents
is annoying; it means that you can't qsort one of the arrays without
invalidating the ordering of the other. By refactoring this function
to use callbacks, we isolate the layout to be independent of the
printing, and a future patch can exploit that to improve layout.
* tools/virsh.c (vshTreePrintInternal): Use callbacks rather than
requiring a char** array.
(vshTreeArrayLookup): New helper function.
(vshTreePrint, cmdNodeListDevices, cmdSnapshotList): Update callers.
I am not a fan of fixed-width buffers. All it takes is a
linear chain of more than 100 snapshots to mess up 'virsh
snapshot-list --tree'. Now that virBuffer is more powerful,
we might as well exploit its power.
* tools/virsh.c (cmdNodeListDevicesPrint): Simplify to use a
virBuffer instead of fixed-width prefix, factor guts, and rename...
(vshTreePrint, vshTreePrintInternal): ...along with new helper.
(cmdNodeListDevices, cmdSnapshotList): Update callers.
Commits 51082301, 16d7b39, and 521cc447 introduced support for
'virsh snapshot-list --from' when talking to a server older than
0.9.5, but broke support for plain 'virsh snapshot-list' for the
same old server in the process. Because the code is not properly
gated, we end up with a SIGSEGV during a strcmp with a NULL argument.
* tools/virsh.c (cmdSnapshotList): Don't waste time on fallbacks
when --from is not present.
If you compile without NLS support, where _() is a no-op macro,
then we end up passing a string literal to a char*, provoking:
In file included from virsh.c:3639:0:
virsh-edit.c: In function ‘cmdSaveImageEdit’:
virsh-edit.c:97:13: error: assignment discards ‘const’ qualifier from pointer target type [-Werror]
virsh-edit.c:106:13: error: assignment discards ‘const’ qualifier from pointer target type [-Werror]
* tools/virsh-edit.c: Be const-safe.
If users *-edit but make a mistake in XML all changes are
permanently lost. However, if virsh is not running within
a script we can ask user if he wants to re-edit the file
and correct the mistakes.
Currently, we either generate some cmd*Edit commands (cmdPoolEdit
and cmdNetworkEdit) via sed script or copy the body of cmdEdit
(e.g. cmdInterfaceEdit, cmdNWFilterEdit, etc.). This fact makes
it harder to implement any new feature to our editing system.
Therefore switch to new implementation - define macros to:
- dump XML (EDIT_GET_XML)
- take an action if XML wasn't changed,
usually just vshPrint() (EDIT_NOT_CHANGED)
- define new object (EDIT_DEFINE) - the edited XML is in @doc_edited
- free object defined by EDIT_DEFINE (EDIT_FREE)
and #include "virsh-edit.c"
strncpy is generally evil - it runs the risk of missing NUL
termination, and more often than not wastes time zeroing way
more bytes than strictly necessary. We've avoided this evil
in our virStrncpy wrapper, except for places where we forgot
to use the wrapper; meanwhile, we have also added an even
higher layer wrapper for setting virTypedParameter values.
* tools/virsh.c (cmdMemtune, cmdBlkdeviotune): Use modern API.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_strncpy): Tighten.
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory
These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove a number of pointless checks against PATH_MAX and
add a syntax-check rule to prevent its use in future
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently virDomainGetCPUStats gets total cpu usage, which consists
of:
1. vcpu usage: the physical cpu time consumed by virtual cpu(s) of
domain
2. hypervisor: `total cpu usage' - `vcpu usage'
The param 'vcpu_time' is for getting vcpu usages.
$LISTFILE is created even no domain is running, and the empty
$LISTFILE could cause improper service status.
stopped ,with saved guests
Which is not right, as there is no domain was saved.
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
* tools/virsh.c (vshParseSnapshotDiskspec): Fix off-by-3 memmove
that would corrupt heap when parsing escaped --diskspec comma.
Bug introduced via commit v0.9.4-260-g35d52b5.
The recent push to use correct scaling terms (kB for 1000, KiB for
1024 - such as commit 9dfdead) missed some places in virsh.
* tools/virsh.c (prettyCapacity, cmdDominfo, cmdFreecell)
(cmdNodeinfo, cmdNodeMemStats, cmdMigrateSetMaxSpeed)
(cmdBlockCopy, cmdBlockPull, cmdBlockJob): Use KiB, not kB, when
referring to multiples of 1024.
* tests/virshtest.c: Update expected output to match.
https://bugzilla.redhat.com/show_bug.cgi?id=817244 mentions that
unlike most other tools, where --help or --version prevent all
further parsing of all later options, virsh was strange in that
--version stopped parsing but --help tried to plow on to the end.
There was no rationale for this original implementation (since
2005!), so I think we can safely conform to common usage patterns.
* tools/virsh.c (main): Drop useless 'help' variable.
Rather than further overloading 'blockpull', I decided to create a
new virsh command to expose the new flags of virDomainBlockRebase.
Blocking until the command completes naturally is pointless, since
the block copy job is intended to run indefinitely. Instead, I
made the command support three --wait modes: by default, it runs until
mirroring is started; with --pivot, it pivots as soon as mirroring
is started; and with --finish, it aborts (for a clean copy) as
soon as mirroring is started.
* tools/virsh.c (VSH_CMD_BLOCK_JOB_COPY): New mode.
(blockJobImpl): Support new flags.
(cmdBlockCopy): New command.
(cmdBlockJob): Support new job info, new abort flag.
* tools/virsh.pod (blockcopy, blockjob): Document the new command
and flags.
We were forgetting to check errno for overflow.
* tools/virsh.c (get_integer_keycode, vshCommandOptInt)
(vshCommandOptUInt, vshCommandOptUL, vshCommandOptLongLong)
(vshCommandOptULongLong): Rewrite to be safer.
I'm tired of shell-scripting to wait for completion of a block pull,
when virsh can be taught to do the same. I couldn't quite reuse
vshWatchJob, as this is not a case of a long-running command where
a second thread must be used to probe job status (at least, not unless
I make virsh start doing blocking waits for an event to fire), but it
served as inspiration for my simpler single-threaded loop. There is
up to a half-second delay between sending SIGINT and the job being
aborted, but I didn't think it worth the complexity of a second thread
and use of poll() just to minimize that delay.
* tools/virsh.c (cmdBlockPull): Add new options to wait for
completion.
(blockJobImpl): Add argument.
(cmdBlockJob): Adjust caller.
* tools/virsh.pod (blockjob): Document new mode.
Block job cancellation can take a while. Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:
A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt. Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel). Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).
A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API. When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.
This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch cleans up variables used to store boolean command flags that
are inquired by vshCommandOptBool to use the bool data type instead of
an integer.
Additionally this patch cleans up flag variables that are inferred from
existing flags.
The documentation for the flag doesn't clearly state that the flag only
enhances the output and the user needs to specify other flags to list
inactive domains, that are enhanced by this flag.
Currently, we put no strains on escape sequence possibly leaving users
with console that cannot be terminated. However, not all ASCII
characters can be used as escape sequence. Only those falling in
@ - _ can be; implement and document this constraint.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Leaks are introduced in commit 1cf0e3d and fe383bb.
Fixing memory leaks, in addition, the patch also fixes a potential missing
return value issue in 'if (from)' statement, without the fixing, although
the programming met a error, the subsequent codes will be executed
continually.
* tools/virsh.c (cmdSnapshotList): fix memory leaks and missing return value.
* How to reproduce?
% virsh snapshot-list <domain> --parent --roots
% virsh snapshot-list <domain> --parent --tree
% virsh snapshot-list <domain> --roots --tree
actual result:
error: --parent and --roots are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
error: --parent and --tree are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
error: --roots and --tree are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
% virsh snapshot-create-as <domain> --name "hello"
% virsh snapshot-create-as <domain> --name "libvirt"
% virsh snapshot-list <domain> --roots --from "hello"
actual result:
error: --roots and --from are mutually exclusive
Name Creation Time State
------------------------------------------------------------
libvirt 2012-03-28 13:46:51 +0800 running
Signed-off-by: Alex Jia <ajia@redhat.com>
Commit d42a2ff forgot to touch up virsh documentation, and commit
4e9953a mis-spelled the option name.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Fix typo
and match recent change in flag meaning.
Found when attempting to build on Fedora 17 alpha with:
./autogen.sh --system --enable-compile-warnings=error
(this same build command works without problem on Fedora 16). All
other struct initializers for this struct have the extra field filled
in (almost always to 0), so the two errant ones were fixed by adding
in the extra 0 field.
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.
This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group. If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.
There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure. However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
virsh.pod had several instances in which it referred to "the
documentation" which was a little puzzling to me since it is
documentation. Reading the document from end to end makes it clear
that it means a specific URI which was noted previously in the text,
but I had never noticed those URIs in several years of referring to
the man page. This patch adds those URIs to several additional places
in the text.
Currently if the URI passed to virConnectOpen* is NULL, then we
- Look for LIBVIRT_DEFAULT_URI env var
- Probe for drivers
This changes it so that
- Look for LIBVIRT_DEFAULT_URI env var
- Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
- Probe for drivers
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
Since VIR_DOMAIN_AFFECT_{LIVE,CONFIG,CURRENT} was created,
all new virsh commands use "--config" to represents the
persistent changing. This patch add "--config" option
for the old commands which still use "--persistent",
and "--persistent" is now alias of "--config".
tools/virsh.c: (use "--config", and "--persistent" is
alias of "--config" now).
cmdDomIfSetLink, cmdDomIfGetLink, cmdAttachDevice,
cmdDetachDevice, cmdUpdateDevice, cmdAttachInterface,
cmdDetachInterface, cmdAttachDisk, cmdDetachDisk
toos/virsh.pod: Update docs of the changed commands, and
add some missed docs for "--config" (detach-interface,
detach-disk, and detach-device).
The last vestige of the inaccurate 'kilobytes' when we meant 1024 is
now gone. And virsh is now useful for setting memory in units other
than KiB.
* tools/virsh.c (cmdSetmem, cmdSetmaxmem): Use new helper routine,
allow passing bogus arguments on to hypervisor to test driver
sanity checking, and fix leak on parse error.
(vshMemtuneGetSize): New helper.
(cmdMemtune): Use it.
* tools/virsh.pod (setmem, setmaxmem, memtune): Document this.
Now can now do:
virsh vol-resize $vol 10M
virsh blockresize $dom $vol 10M
to get both interfaces to resize to 10MiB. The remaining wart
is that vol-resize defaults to bytes, but blockresize defaults
to KiB, but we can't break existing scripts; oh well, it's no
worse than the same wart of the underlying virDomainBlockResize.
The API for virStorageVolResize states that capacity must always
be positive, and that the presence of shrink and delta flags is
what implies a negative change.
* tools/virsh.c (vshCommandOptScaledInt): New function.
(cmdVolResize): Don't pass negative size.
(cmdVolSize): Rename...
(vshVolSize): ...and use new helper routine.
(cmdBlockResize): Use new helper routine, and support new bytes
flag.
* tools/virsh.pod (NOTES): Document suffixes.
(blockresize, vol-create-as, vol-resize): Point to notes.
Just because our public API has a typo doesn't mean that virsh
has to keep the typo.
* tools/virsh.c (VSH_CMD_FLAG_ALIAS): New flag.
(nodedevCmds): Use it.
(cmdHelp): Omit alias commands.
(cmdNodeDeviceDettach): Rename...
(cmdNodeDeviceDetach): ...to this.
* tools/virsh.pod (nodedev-detach): Document it.
Command line interfaces should use dash, not underscore, as many
keyboard layouts allow that to be typed with fewer shift key presses.
Also, the US spelling of --tunneled gets more google hits than the
UK spelling of --tunnelled.
* tools/virsh.c (opts_migrate): Allow US variant.
(opts_blkdeviotune): Prefer - over _.
* tools/virsh.pod (blkdeviotune): Fix spelling.
In the past, we have created some virsh options with less-than-stellar
names. For back-compat reasons, those names must continue to parse,
but we don't want to document them in help output. This introduces
a new option type, an alias, which points to a canonical option name
later in the option list.
I'm actually quite impressed that our code has already been factored
to do all option parsing through common entry points, such that I
got this added in relatively few lines of code!
* tools/virsh.c (VSH_OT_ALIAS): New option type.
(opts_echo): Hook up an alias, for easy testing.
(vshCmddefOptParse, vshCmddefHelp, vshCmddefGetOption): Allow for
aliases.
* tools/virsh.pod (NOTES): Document promise of back-compat.
* tests/virshtest.c (mymain): Test new feature.
With this patch, it's possible to shut down guests in parallel. Parallel
startup was possible before, but this functionality was not documented
properly.
To enable parallel startup set the START_DELAY to 0.
Parallel shutdown has a configurable parameter PARALLEL_SHUTDOWN that
defines the number of machines being shut down in parallel. Enabling
this feature changes the semantics of SHUTDOWN_TIMEOUT parameter that is
applied as a cumulative timeout to shutdown all guests on a URI.
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'. Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.
Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.
* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
Now virsh can call virDomainBlockRebase.
* tools/virsh.c (cmdBlockPull): Add --base parameter.
(blockJobImpl): Use it to expose BlockRebase API.
* tools/virsh.pod (blockpull): Document it.
This patch adds a check to the libvirt-guests script to check for the
URI to be alive before attempting any calls. This avoids nasty error
messages and allows us to fail gracefully and continue on other URIs
configured in the script.
The libvirt-guests script tried to do a managed save of transient guest
that failed. This patch notifies which guests are transient (and not
being saved) and saves only the persistent ones.
This patch adds documentation to functions defined in the libvirt-guests
init script and changes use of virsh's new commands to make the script
easier.
The current scrub version doesn't support pfitzner7, pfitzner33 and schneier
patterns on RHEL, we should comment it in virsh man page.
* tools/virsh.pod: update wiping algorithms docs.
Signed-off-by: Alex Jia <ajia@redhat.com>
vshFindDisk is to find the disk node in xml doc with given source
path or target of disk device, and type (indicates disk type,
normal disk or changeable disk).
vshPrepareDiskXML is to make changes on the disk node (e.g. create
and insert the new <source> node for inserting media of CDROM drive).
They are marked as unused temporarily.
This patch adds support for the newly introduced
VIR_DOMAIN_CONSOLE_FORCE and VIR_DOMAIN_CONSOLE_SAFE flags. The console
command now has an optional parameter --force that specifies that the
user wants to forcibly interrupt an ongoing console session and create
a new one. Flag --safe requests that the console should be opened only
if the hypervisor driver supports safe console handling.
The behaviour to this point was that the daemon opened two streams to
the console, that competed for data from the pipe, and the result was
that both of the consoles ended up scrambled.
This patch doesn't modify operation of other commands dealing with
console connections (start, create) as those open connections to newly
started domains making it virtually impossible for another client to race
for the console and steal it.
* tools/console.c:
- add support for flag passthrough
* tools/console.h:
- modify function prototypes to match impl.
* tools/virsh.c:
- add flag --force for the console command
If attempting to run
ssh root@somehost virsh console someguest
You'll get an error
2012-02-15 13:11:47.683+0000: 4765: info : libvirt version: 0.9.10, package: 1.fc18 (Unknown, 2012-02-15-11:48:57, lettuce.camlab.fab.redhat.com)
2012-02-15 13:11:47.683+0000: 4765: error : vshRunConsole:320 : unable to get tty attributes: Invalid argument
Connected to domain f16x86_64
Escape character is ^]
There are several problems here
- The actual error message is bad for users
- We shouldn't rely on VIR_ERROR for this case
- The prompt makes it look like we still connected
because we didn't flush stdout.
* virsh.c: Flush stdout before starting console and check
for a valid tty
This patch adds new options to the "virsh list" command enabling
filtering of persistent and transient domains along with the option to
print only UUIDs or names of domains instead of printing the table.
Option --name prints domain names (one per line) instead of the default
table. Similarly --uuid prints domain's UUID. The option --table is
an alias for the default behavior.
Aditionally --persistent and/or --transient may be specified to filter
the output of domains.
Commit fad5cd2108 introduced option to
display domain's title in the list command output. There was a mistake
in the virsh man page example for this command stating --note instead of
--title.
When blkdeviotune was first committed in 0.9.8, we had the limitation
that setting one value reset all others. But bytes and iops should
be relatively independent. Furthermore, setting tuning values on
a live domain followed by dumpxml did not output the new settings.
* src/qemu/qemu_driver.c (qemuDiskPathToAlias): Add parameter, and
update callers.
(qemuDomainSetBlockIoTune): Don't lose previous unrelated
settings. Make live changes reflect to dumpxml output.
* tools/virsh.pod (blkdeviotune): Update documentation.
Any device XML doesn't use the same order as libvirt generates, or
uses decimal for attributes like "slot" of "<address>" will cause
device detaching to fail, as virsh compares the XML simply earlier
in strict manner before internal parsing.
This is regression introduced by ea7182c.
Commit fad5cd2108 introduces a new flag
that allows to show domain's title with domains. This commit introduced
resource leak while listing inactive domains with titles.
Detected by valgrind. the codes are allocating 0 bytes memory to variable
cpumap by vshCalloc function, and then the function VIR_USE_CPU will access
it later, a invalid read error will be hit.
* tools/virsh.c(cmdVcpuPin): fix invalid read error.
* How to reproduce?
% valgrind -v --read-var-info=yes virsh vcpupin <domain> 0 0
* Actual result:
==27271== ERROR SUMMARY: 5 errors from 2 contexts (suppressed: 8 from 6)
==27271==
==27271== 1 errors in context 1 of 2:
==27271== Invalid read of size 1
==27271== at 0x39CF087E2E: __GI_memcpy (in /lib64/libc-2.12.so)
==27271== by 0x39CF114FDC: xdrmem_putbytes (in /lib64/libc-2.12.so)
==27271== by 0x39CF114707: xdr_opaque (in /lib64/libc-2.12.so)
==27271== by 0x4D56194: xdr_remote_domain_pin_vcpu_args (remote_protocol.c:1844)
==27271== by 0x4D6CCE1: virNetMessageEncodePayload (virnetmessage.c:341)
==27271== by 0x4D5A44B: virNetClientProgramCall (virnetclientprogram.c:327)
==27271== by 0x4D36EDB: callWithFD (remote_driver.c:4546)
==27271== by 0x4D36F7B: call (remote_driver.c:4567)
==27271== by 0x4D3B2C1: remoteDomainPinVcpu (remote_client_bodies.h:1566)
==27271== by 0x4D199D3: virDomainPinVcpu (libvirt.c:8585)
==27271== by 0x4241F4: cmdVcpuPin (virsh.c:5262)
==27271== by 0x4150A6: vshCommandRun (virsh.c:17712)
==27271== Address 0x5602b80 is 0 bytes after a block of size 0 alloc'd
==27271== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==27271== by 0x4C89BDF: virAllocN (memory.c:129)
==27271== by 0x423868: _vshCalloc.clone.2 (virsh.c:454)
==27271== by 0x423EF9: cmdVcpuPin (virsh.c:5190)
==27271== by 0x4150A6: vshCommandRun (virsh.c:17712)
==27271== by 0x426583: main (virsh.c:19289)
==27271==
==27271==
==27271== 4 errors in context 2 of 2:
==27271== Invalid read of size 1
==27271== at 0x424133: cmdVcpuPin (virsh.c:5245)
==27271== by 0x4150A6: vshCommandRun (virsh.c:17712)
==27271== by 0x426583: main (virsh.c:19289)
==27271== Address 0x5602b80 is 0 bytes after a block of size 0 alloc'd
==27271== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==27271== by 0x4C89BDF: virAllocN (memory.c:129)
==27271== by 0x423868: _vshCalloc.clone.2 (virsh.c:454)
==27271== by 0x423EF9: cmdVcpuPin (virsh.c:5190)
==27271== by 0x4150A6: vshCommandRun (virsh.c:17712)
==27271== by 0x426583: main (virsh.c:19289)
Signed-off-by: Alex Jia <ajia@redhat.com>
Unlike .cvsignore under CVS, git allows for ignoring nested
names. We weren't very consistent where new tests were
being ignored (some in .gitignore, some in tests/.gitignore),
and I found it easier to just consolidate everything.
* .gitignore: Subsume entries from subdirectories.
* daemon/.gitignore: Delete.
* docs/.gitignore: Likewise.
* docs/devhelp/.gitignore: Likewise.
* docs/html/.gitignore: Likewise.
* examples/dominfo/.gitignore: Likewise.
* examples/domsuspend/.gitignore: Likewise.
* examples/hellolibvirt/.gitignore: Likewise.
* examples/openauth/.gitignore: Likewise.
* examples/domain-events/events-c/.gitignore: Likewise.
* include/libvirt/.gitignore: Likewise.
* src/.gitignore: Likewise.
* src/esx/.gitignore: Likewise.
* tests/.gitignore: Likewise.
* tools/.gitignore: Likewise.
Our HACKING discourages use of malloc and free, for at least
a couple of years now. But we weren't enforcing it, until now :)
For now, I've exempted python and tests, and will clean those up
in subsequent patches. Examples should be permanently exempt,
since anyone copying our examples won't have use of our
internal-only memory.h via libvirt_util.la.
* cfg.mk (sc_prohibit_raw_allocation): New rule.
(exclude_file_name_regexp--sc_prohibit_raw_allocation): and
exemptions.
* src/cpu/cpu.c (cpuDataFree): Avoid false positive.
* src/conf/network_conf.c (virNetworkDNSSrvDefParseXML): Fix
offenders.
* src/libxl/libxl_conf.c (libxlMakeDomBuildInfo, libxlMakeVfb)
(libxlMakeDeviceModelInfo): Likewise.
* src/rpc/virnetmessage.c (virNetMessageSaveError): Likewise.
* tools/virsh.c (_vshMalloc, _vshCalloc): Likewise.
Detected by valgrind. Leak is introduced in commit 3bb6bcf.
Free 'vol' memory before allocating memory, the codes will miss one time
free when 'vol_i = nvolumes' in for loop, so plug memory leak.
* tools/virsh.c: fix memory leak on cmdUndefine.
* How to reproduce?
% dd if=/dev/null of=/var/lib/libvirt/images/foo bs=1 count=1 seek=10M
% virsh define foo.xml (disk source file points to '/var/lib/libvirt/images/foo')
% virsh vol-clone foo foo-clone default (the original guest name is 'foo')
% virsh pool-refresh default
% virsh vol-list default (make sure 'foo-clone' volume exists)
% virsh define foo-clone.xml (disk source file points to '/var/lib/libvirt/images/foo-clone')
% valgrind -v --leak-check=full virsh undefine foo-clone --remove-all-storage
* Actual results:
1. virsh output
Domain foo-clone has been undefined
Volume '/var/lib/libvirt/images/foo-clone' removed.
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
2. valgrind result
==6515== 92 (40 direct, 52 indirect) bytes in 1 blocks are definitely lost in loss record 46 of 69
==6515== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==6515== by 0x4C89B71: virAlloc (memory.c:101)
==6515== by 0x4CFCACE: virGetStorageVol (datatypes.c:724)
==6515== by 0x4D4A8E0: remoteStorageVolLookupByPath (remote_driver.c:4664)
==6515== by 0x4D07153: virStorageVolLookupByPath (libvirt.c:12508)
==6515== by 0x4270E6: cmdUndefine (virsh.c:2828)
==6515== by 0x4151B6: vshCommandRun (virsh.c:17693)
==6515== by 0x4264D3: main (virsh.c:19270)
==6515==
==6515== LEAK SUMMARY:
==6515== definitely lost: 40 bytes in 1 blocks
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=786674
Signed-off-by: Alex Jia <ajia@redhat.com>
This patch adds a new command "desc" to show and modify titles and
description for the domains using the new API.
This patch also adds a new flag for the "list" command to show titles in
the domain list, to allow easy identification of VMs by storing a short
description.
Example:
virsh # list --title
Id Name State Title
-----------------------------------------------
0 Domain-0 running Mailserver 1
2 fedora paused
Add a new function to allow changing of capacity of storage volumes.
Plan out several flags, even if not all of them will be implemented
up front.
Expose the new command via 'virsh vol-resize'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Fix a build failure:
virt-host-validate.c: In function 'main':
virt-host-validate.c:82:5: error: implicit declaration of function 'setlocale' [-Werror=implicit-function-declaration]
virt-host-validate.c:82:5: error: nested extern declaration of 'setlocale' [-Werror=nested-externs]
virt-host-validate.c:82:20: error: 'LC_ALL' undeclared (first use in this function)
* tools/virt-host-validate.c: Add <locale.h>.
* .gitignore: Ignore built executable.
To assist people in verifying that their host is operating in an
optimal manner, provide a 'virt-host-validate' command. For each
type of hypervisor, it will check any pre-requisites, or other
good recommendations and report what's working & what is not.
eg
# virt-host-validate
QEMU: Checking for device /dev/kvm : FAIL (Check that the 'kvm-intel' or 'kvm-amd' modules are loaded & the BIOS has enabled virtualization)
QEMU: Checking for device /dev/vhost : WARN (Load the 'vhost_net' module to improve performance of virtio networking)
QEMU: Checking for device /dev/net/tun : PASS
LXC: Checking for Linux >= 2.6.26 : PASS
This warns people if they have vmx/svm, but don't have /dev/kvm. It
also warns about missing /dev/vhost net.
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
Extend the 'shutdown' and 'reboot' methods so that they both
accept a new argument
--mode acpi|agent
* tools/virsh.c: New args for shutdown/reboot
* tools/virsh.pod: Document new args
Other virsh domifXXX commands can accept target name
as a parameter to specify interface. From viewpoint of
consistency, virsh domif-getlink command should accept
target name as a parameter. This patch achieves this.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Although this is a public API break, it only affects users that
were compiling against *_LAST values, and can be trivially
worked around without impacting compilation against older
headers, by the user defining VIR_ENUM_SENTINELS before using
libvirt.h. It is not an ABI break, since enum values do not
appear as .so entry points. Meanwhile, it prevents users from
using non-stable enum values without explicitly acknowledging
the risk of doing so.
See this list discussion:
https://www.redhat.com/archives/libvir-list/2012-January/msg00804.html
* include/libvirt/libvirt.h.in: Hide all sentinels behind
LIBVIRT_ENUM_SENTINELS, and add missing sentinels.
* src/internal.h (VIR_DEPRECATED): Allow inclusion after
libvirt.h.
(LIBVIRT_ENUM_SENTINELS): Expose sentinels internally.
* daemon/libvirtd.h: Use the sentinels.
* src/remote/remote_protocol.x (includes): Don't expose sentinels.
* python/generator.py (enum): Likewise.
* tests/cputest.c (cpuTestCompResStr): Silence compiler warning.
* tools/virsh.c (vshDomainStateReasonToString)
(vshDomainControlStateToString): Likewise.
Preparation for another patch that refactors common patterns
into the new file for fewer lines of code overall.
* src/util/util.h (virTypedParameterArrayClear): Move...
* src/util/virtypedparam.h: ...to new file.
(virTypedParameterArrayValidate, virTypedParameterAssign): New
prototypes.
* src/util/util.c (virTypedParameterArrayClear): Likewise.
* src/util/virtypedparam.c: New file.
* po/POTFILES.in: Mark file for translation.
* src/Makefile.am (UTIL_SOURCES): Build it.
* src/libvirt_private.syms (util.h): Split...
(virtypedparam.h): to new section.
(virkeycode.h): Sort.
* daemon/remote.c: Adjust callers.
* tools/virsh.c: Likewise.
When using "virsh domifstat" command or "virsh domiftune" command,
we pass an interface name as a parameter, so interface name is
important.
"virsh domiflist" output should display interface names
on the first row.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Disk "type" and "device" are generally interesting stuff the
user may want to known, too. To not break any scripts which
parsed the output field, a new option "--details" is introduced
to output the two introduced fields.
Domain IDs are at least 16 bits for most hypervisors, theoretically
event 32-bits. 3 characters is clearly too small an alignment.
Increase alignment to 5 characters to allow 16-bit domain IDs to
display cleanly. Commonly seen with LXC where domain IDs are the
process IDs by default. Also increase the 'name' field from 20
to 30 characters to cope with longer guest names which are quite
common
Just like command "domblklist", the command extracts "type",
"source", "target", "model", and "MAC" of all virtual interfaces
from domain XML (live or persistent).
When running virsh migrate with --xml option and actual xml file doesn't
exist, virsh hasn't output any error information, although return value
is 1.
* tools/virsh.c: Raising a appropriate error information when operation fails.
* How to reproduce?
% virsh migrate <domain> --live qemu+ssh://<target host>/system --xml non-existent.xml
% echo $?
* Fixed result:
error: file 'non-existent.xml' doesn't exist
Signed-off-by: Alex Jia <ajia@redhat.com>
When disk snapshots were first implemented, libvirt blindly refused
to allow an external snapshot destination that already exists, since
qemu will blindly overwrite the contents of that file during the
snapshot_blkdev monitor command, and we don't like a default of
data loss by default. But VDSM has a scenario where NFS permissions
are intentionally set so that the destination file can only be
created by the management machine, and not the machine where the
guest is running, so that libvirt will necessarily see the destination
file already existing; adding a flag will allow VDSM to force the file
reuse without libvirt complaining of possible data loss.
https://bugzilla.redhat.com/show_bug.cgi?id=767104
* include/libvirt/libvirt.h.in (virDomainSnapshotCreateFlags): Add
VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it. Add
note about partial failure.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Add new
flag.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateXML): Implement the new flag.
virshReportError() function frees the most recent error reported from
libvirt. Condition that checks if connection to the daemon was broken
during last command was then limited to check for SIGPIPE signal not
taking into account possible errors signalized without SIGPIPE.
This patch moves the check before the error is freed, to take into
account code that does not emit SIGPIPE while failing.
* tools/virsh.c: - move check for broken connection before error print.
Add a new command domiftune to get/set interface parameters.
* tools/virsh.c: implement the new command
* tools/virsh.pod: documentation of the new command
Trivial patch, move version command to host commands group.
It has no any related with any domain.
It may connect to the daemon, so the flag is 0 but not VSH_CMD_FLAG_NOCONNECT.
Virsh's echo command looks not having any relations with domains and its
description should go into the generic commands section instead of the
domain commands section (current).
Virsh's send-key command manipulates domains and its description should
go into the domain commands section instead of generic commands section
(current).
called vshWatchJob. This can be later used in other
job oriented commands like dump, save, managedsave
to report progress and allow user to cancel via ^C.
Detected by valgrind. Leaks introduced in commit 4d5383f.
* tools/virsh.c: fix memory leaks on cmdDomXMLFromNative and cmdDomXMLToNative.
* how to reproduce?
% virsh dumpxml ${guest} > foo.xml
% valgrind -v --leak-check=full virsh domxml-from-native qemu-argv foo.xml
% valgrind -v --leak-check=full virsh domxml-to-native qemu-argv foo.xml
* actual valgrind results:
==9724== 8,193 bytes in 1 blocks are definitely lost in loss record 31 of 33
==9724== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==9724== by 0x4A06167: realloc (vg_replace_malloc.c:525)
==9724== by 0x4C7510B: virReallocN (memory.c:161)
==9724== by 0x4C84679: virFileReadLimFD (util.c:394)
==9724== by 0x4C84815: virFileReadAll (util.c:455)
==9724== by 0x41A89F: cmdDomXMLFromNative (virsh.c:5532)
==9724== by 0x414872: vshCommandRun (virsh.c:16464)
==9724== by 0x425623: main (virsh.c:17971)
==9724==
==9724== LEAK SUMMARY:
==9724== definitely lost: 8,193 bytes in 1 blocks
==9724== indirectly lost: 0 bytes in 0 blocks
==9724== possibly lost: 0 bytes in 0 blocks
==9724== still reachable: 127,128 bytes in 1,347 blocks
==7409== 8,193 bytes in 1 blocks are definitely lost in loss record 31 of 33
==7409== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==7409== by 0x4A06167: realloc (vg_replace_malloc.c:525)
==7409== by 0x4C7510B: virReallocN (memory.c:161)
==7409== by 0x4C84679: virFileReadLimFD (util.c:394)
==7409== by 0x4C84815: virFileReadAll (util.c:455)
==7409== by 0x41A7AF: cmdDomXMLToNative (virsh.c:5578)
==7409== by 0x414892: vshCommandRun (virsh.c:16463)
==7409== by 0x425633: main (virsh.c:17970)
==7409==
==7409== LEAK SUMMARY:
==7409== definitely lost: 8,193 bytes in 1 blocks
==7409== indirectly lost: 0 bytes in 0 blocks
==7409== possibly lost: 0 bytes in 0 blocks
==7409== still reachable: 127,128 bytes in 1,347 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
Using 'virReallocN' to allocate memory on virConsoleEventOnStdin,
virConsoleEventOnStdout and virConsoleEventOnStream, however, the
cleanup function virConsoleShutdown hasn't released these memory.
* tools/console.c: fix memory leaks on virConsoleShutdown.
https://bugzilla.redhat.com/show_bug.cgi?id=767488
Signed-off-by: Alex Jia <ajia@redhat.com>
No need to repeat code for formatting typed parameters.
* tools/virsh.c (vshGetTypedParamValue): Support strings, and exit
on OOM.
(cmdSchedinfo, cmdBlkiotune, cmdMemtune, cmdBlkdeviotune): Use
it for less code.
Add an option for virsh undefine command, to remove associated storage
volumes while undefining a domain. This patch allows the user to remove
associated (libvirt managed ) storage volumes while undefining a domain.
The new option --storage for the undefine command takes a string
argument that consists of comma separated list of target or source path
of volumes to be undefined. Volumes are removed after the domain has
been successfully undefined,
If a volume is not part of a storage pool, the user is warned to remove
the volume in question himself.
Option --wipe-storage may be specified along with this, that ensures
the image is wiped before removing.
Option --remove-all-storage enables the user to remove all storage. The
name is chosen long as the users should be aware what they're about to
do.
I was wondering why 'virsh edit' didn't support the same
'--inactive' option as 'virsh dumpxml'; reading the source
code showed that --inactive was already implied, and that
the only way to alter a running guest rather than affecting
next boot is by hot-plugging individual devices, or by
something complex like saving the guest and modifying the
save image.
* tools/virsh.pod (define, edit): Mention behavior when guest is
already running.
If parsing of arguments failed, virsh did silently exit returning and
error state, but not specifying the possible problem.
* tools/virsh: cmdNodesuspend: - error handling added
Commit 4d9e51f6 fixed a 'make uninstall' failure, but failed
to follow other conventions already present in src/Makefile.am.
In particular, we prefer MKDIR_P over mkdir -p, and should
have a matching rmdir during uninstall for every directory
created during install (the idea being that uninstall in a
DESTDIR should be clean, while installation in the final
system should not fail with non-empty directories left behind).
* tools/Makefile.am (install-sysconfig, install-initscript)
(install-systemd): Use MKDIR_P.
(uninstall-sysconfig, uninstall-initscript, uninstall-systemd):
Also remove directories.
* daemon/Makefile.am (install-data-local, install-data-polkit)
(install-logrotate, install-sysconfig, install-sysctl)
(install-init-redhat, install-init-upstart, install-init-systemd)
(install-data-sasl): Use MKDIR_P.
(uninstall-data-polkit, uninstall-sysconfig, uninstall-sysctl)
(uninstall-init-redhat, uninstall-init-upstart)
(uninstall-init-systemd): Also remove directory.
(uninstall-logrotate): New rule.
(uninstall-local): Add uninstall-logrotate.
Detected by valgrind. Leak introduced in commit 88a993b:
* tools/virsh.c: fix memory leak on cmdDomblklist.
* how to reproduce?
% valgrind -v --leak-check=full virsh domblklist <domain name>
* actual valgrind result:
==6573== 1,836 bytes in 1 blocks are definitely lost in loss record 110 of 124
==6573== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==6573== by 0x330D71497D: xdr_string (in /lib64/libc-2.12.so)
==6573== by 0x4D26CED: xdr_remote_nonnull_string (remote_protocol.c:30)
==6573== by 0x4D28138: xdr_remote_domain_get_xml_desc_ret (remote_protocol.c:1418)
==6573== by 0x4D3C0C2: virNetMessageDecodePayload (virnetmessage.c:382)
==6573== by 0x4D3279F: virNetClientProgramCall (virnetclientprogram.c:382)
==6573== by 0x4D0D50B: callWithFD (remote_driver.c:4339)
==6573== by 0x4D0D5AB: call (remote_driver.c:4360)
==6573== by 0x4D16EAF: remoteDomainGetXMLDesc (remote_client_bodies.h:861)
==6573== by 0x4CF9F4F: virDomainGetXMLDesc (libvirt.c:4098)
==6573== by 0x4154D9: cmdDomblklist (virsh.c:1722)
==6573== by 0x4149E2: vshCommandRun (virsh.c:16365)
==6573==
==6573== 46,009 (352 direct, 45,657 indirect) bytes in 1 blocks are definitely lost in loss record 123 of 124
==6573== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==6573== by 0x3318286DC6: xmlXPathNewContext (in /usr/lib64/libxml2.so.2.7.6)
==6573== by 0x4C79AE2: virXMLParseHelper (xml.c:779)
==6573== by 0x415512: cmdDomblklist (virsh.c:1726)
==6573== by 0x4149E2: vshCommandRun (virsh.c:16365)
==6573== by 0x427743: main (virsh.c:17867)
==6573==
==6573== LEAK SUMMARY:
==6573== definitely lost: 2,188 bytes in 2 blocks
==6573== indirectly lost: 45,657 bytes in 332 blocks
==6573== possibly lost: 0 bytes in 0 blocks
==6573== still reachable: 128,034 bytes in 1,364 blocks
==6573== suppressed: 0 bytes in 0 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
Reported by Alex Jia <ajia@redhat.com>. Function cmdDomIfGetLink did not
set a success return value on success path.
Signed-off-by: Alex Jia<ajia@redhat.com>
Detected by valgrind. Leak introduced in commit dc675f3:
* tools/virsh.c: fix memory leak on cmdDomIfGetLink.
* how to reproduce?
% valgrind -v --leak-check=full virsh domif-getlink <domain name> 0
* actual valgrind result:
==13102== 18 bytes in 1 blocks are definitely lost in loss record 9 of 47
==13102== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==13102== by 0x322A6A67DD: xmlStrndup (in /usr/lib64/libxml2.so.2.7.6)
==13102== by 0x414892: cmdDomIfGetLink (virsh.c:1538)
==13102== by 0x4136A2: vshCommandRun (virsh.c:16363)
==13102== by 0x4253FB: main (virsh.c:17865)
==13102==
==13102== LEAK SUMMARY:
==13102== definitely lost: 18 bytes in 1 blocks
==13102== indirectly lost: 0 bytes in 0 blocks
==13102== possibly lost: 0 bytes in 0 blocks
==13102== still reachable: 127,888 bytes in 1,361 blocks
==13102== suppressed: 0 bytes in 0 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
Detected by valgrind. Leak introduced in commit e9bd9a0:
* tools/virsh.c: fix memory leak on cmdBlkdeviotune.
* how to reproduce?
% valgrind -v --leak-check=full virsh blkdeviotune <domain name> <block device>
* actual valgrind result:
==12759== 576 bytes in 1 blocks are definitely lost in loss record 18 of 29
==12759== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==12759== by 0x42134E: _vshCalloc.clone.2 (virsh.c:422)
==12759== by 0x4217CB: cmdBlkdeviotune (virsh.c:6364)
==12759== by 0x4136A2: vshCommandRun (virsh.c:16363)
==12759== by 0x4253FB: main (virsh.c:17865)
==12759==
==12759== LEAK SUMMARY:
==12759== definitely lost: 576 bytes in 1 blocks
==12759== indirectly lost: 0 bytes in 0 blocks
==12759== possibly lost: 0 bytes in 0 blocks
==12759== still reachable: 126,964 bytes in 1,342 blocks
==12759== suppressed: 0 bytes in 0 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
The installation rules for the libvirt-guests.service were
totally broken
- Installing in the wrong location
- The location was not overridable
- The install-systemd rule was not invoked anywhere
- The install-systemd rule was not invoking install-initscript
which it depends on
- The installed service file lacked a .service extension
* tools/Makefile.am: Fix install of libvirt-guests.service
On RHEL 5, with libxml2-2.6.26, the build failed with:
virsh.c: In function 'vshNodeIsSuperset':
virsh.c:11951: warning: implicit declaration of function 'xmlChildElementCount'
(or if warnings aren't errors, a link failure later on).
* src/util/xml.h (virXMLChildElementCount): New prototype.
* src/util/xml.c (virXMLChildElementCount): New function.
* src/libvirt_private.syms (xml.h): Export it.
* tools/virsh.c (vshNodeIsSuperset): Use it.
https://bugzilla.redhat.com/show_bug.cgi?id=648855 mentioned a
misuse of 'an' where 'a' is proper; that has since been fixed,
but a search found other problems (some were a spelling error for
'and', while most were fixed by 'a').
* daemon/stream.c: Fix grammar.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_event.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/esx/esx_vi.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* src/rpc/virnetserverprogram.c: Likewise.
* src/storage/storage_backend_fs.c: Likewise.
* src/util/conf.c: Likewise.
* src/util/dnsmasq.c: Likewise.
* src/util/iptables.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* tools/virsh.c: Likewise.
Currently virsh supports only ^] as escape character for console.
However, some users might want to use something else. This patch
creates such ability by specifying '-e' switch on virsh command
line.
Not only was ctl->quit accessed without a mutex but unfortunately,
virEventAddTimeout only interrupts the poll when event loop is running
so the hack needs to add a timeout that will make next poll return
immediately without blocking.
Prior to this patch, for a running dom, the commands:
$ virsh blkiotune dom --device-weights /dev/sda,502,/dev/sdb,498
$ virsh blkiotune dom --device-weights /dev/sda,503
$ virsh blkiotune dom
weight : 500
device_weight : /dev/sda,503
claim that /dev/sdb no longer has a non-default weight, but
directly querying cgroups says otherwise:
$ cat /cgroup/blkio/libvirt/qemu/dom/blkio.weight_device
8:0 503
8:16 498
After this patch, an explicit 0 is required to remove a device path
from the XML, and omitting a device path that was previously
specified leaves that device path untouched in the XML, to match
cgroups behavior.
* src/qemu/qemu_driver.c (parseBlkioWeightDeviceStr): Rename...
(qemuDomainParseDeviceWeightStr): ...and use correct type.
(qemuDomainSetBlkioParameters): After parsing string, modify
rather than replacing existing table.
* tools/virsh.pod (blkiotune): Tweak wording.
Support virsh command blkdeviotune. Can set or query a block disk
I/O throttle setting.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds per-device weights to <blkiotune>. Note that the
cgroups implementation only supports weights per block device,
and not per-file within the device; hence this option must be
global to the domain definition rather than tied to individual
<devices>/<disk> entries:
<domain ...>
<blkiotune>
<device>
<path>/path/to/block</path>
<weight>1000</weight>
</device>
</blkiotune>
..
This patch also adds a parameter --device-weights to virsh command
blkiotune for setting/getting blkiotune.weight_device for any
hypervisor that supports it. All <device> entries under
<blkiotune> are concatenated into a single string attribute under
virDomain{Get,Set}BlkioParameters, named "device_weight".
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If both nodes do not have any children, we pass zero to
virBitmapAlloc which returns NULL. In turn we report OOM error
and return false (meaning nodes are different). This is not true.
Up to now users have to give a full XML description on input when
device-detaching. If they omitted something it lead to unclear
error messages (like generated MAC wasn't found, etc.).
With this patch users can specify only those information which
specify one device sufficiently precise. Remaining information is
completed from domain.
This patch adds support for a systemd init service for libvirtd
and libvirt-guests. The libvirtd.service is *not* written to use
socket activation, since we want libvirtd to start on boot so it
can do guest auto-start.
The libvirt-guests.service is pretty lame, just exec'ing the
original init script for now. Ideally we would factor out the
functionality, into some shared tool.
Instead of
./configure --with-init-script=redhat
You can now do
./configure --with-init-script=systemd
Or better still:
./configure --with-init-script=systemd+redhat
We can also now support install of the upstart init script
* configure.ac: Add systemd, and systemd+redhat options to
--with-init-script option
* daemon/Makefile.am: Install systemd services
* daemon/libvirtd.sysconf: Add note about unused env variable
with systemd
* daemon/libvirtd.service.in: libvirtd systemd service unit
* libvirt.spec.in: Add scripts to installing systemd services
and migrating from legacy init scripts
* tools/Makefile.am: Install systemd services
* tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in
* tools/libvirt-guests.service.in: systemd service unit
One of the top questions by libvirt users is how to create a host
bridge device so that guests can be directly on the physical
network. There are several example documents that explain how to do
this manually, but following them often results in confusion and
failure. virt-manager does a good job of creating a bridge based on an
existing network device, but not everyone wants to use virt-manager.
This patch adds a new command, iface-bridge that makes it just about
as simple as possible to create a new bridge device based on an
existing ethernet/vlan/bond device (including associating IP
configuration with the bridge rather than the now-attached device),
and start that new bridge up ready for action, eg:
virsh iface-bridge eth0 br0
For symmetry's sake, it also adds a command to remove a device from a
bridge, restoring the IP config to the now-unattached device:
virsh iface-unbridge br0
(I had a short debate about whether to do "iface-unbridge eth0"
instead, but that would involve searching through all bridge devices
for the one that contained eth0, which seems like a bit too much
trouble).
NOTE: These two commands require that the netcf library be available
on the host. Hopefully this will provide some extra incentive for
people using suse, debian, ubuntu, and other similar systems to polish
up (and push downstream) the ports to those distros recently pushed to
the upstream netcf repo by Dan Berrange. Anyone interested in helping
with that effort in any way should join the netcf-devel mailing list
(subscription info at
https://fedorahosted.org/mailman/listinfo/netcf-devel)
During creation of the bridge, it's possible to specify whether or not
the STP protocol should be started up on the bridge and, if so, how
many seconds the bridge should squelch traffic from newly added
devices while learning new topology (defaults are stp='on' and
delay='0', which seems to usually work best for bridges used in the
context of libvirt guests).
There is also an option to not immediately start the bridge (and a
similar option to not immediately start the un-attached device after
destroying the bridge. Default is to start the new device, because in
the case of iface-unbridge not starting is strongly discouraged as it
will leave the system with no network connectivity on that interface
(because it's necessary to destroy/undefine the bridge device before
the unattached device can be defined), and it seemed better to make
the option for iface-bridge behave consistently.
NOTE TO THOSE TRYING THESE COMMANDS FOR THE FIRST TIME: to guard
against any "unexpected" change to configuration, it is advisable to
issue an "virsh iface-begin" command before starting any interface
config changes, and "virsh iface-commit" only after you've verified
that everything is working as you expect. If something goes wrong,
you can always run "virsh iface-rollback" or reboot the system (which
should automatically do iface-rollback).
Aside from adding the code for these two functions, and the two
entries into the command table, the only other change to virsh.c was
to add the option name to vshCommandOptInterfaceBy(), because the
iface-unbridge command names its interface option as "bridge".
virsh.pod has also been updated with short descriptions of these two
new commands.
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines
- src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
- src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
- src/util/virsocketaddr.c: virSocketAddr and APIs
- src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
for virNetDevBandwidth
- src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
for virNetDevVPortProfile
* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
src/conf/domain_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/conf/nwfilter_conf.h,
src/esx/esx_util.h, src/network/bridge_driver.c,
src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
src/util/virnetdev.h, src/util/virnetdevtap.c,
tools/virsh.c: Update include files
As the description of removing CDROM media from
http://wiki.libvirt.org/page/QEMUSwitchToLibvirt#eject_DEV
Add flag 'VSH_OFLAG_EMPTY_OK' to the option 'source' of attach-disk
Then avoid outputting <source> in the XML if 'source' was empty,
rather than trusting libvirt domain_conf.c to understand an empty
string.
Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If vol-create-from is failed due to 'input volume not found',
virsh outputs like this:
$ sudo virsh vol-create-from testpool test-vol.xml test.img
error: failed to get vol 'test.img', specifying --pool might help
error: Storage volume not found: no storage vol with matching path
However, '--pool' is incorrect because it is already specified as
second argument ('testpool' in this case). It should be "--inputpool".
The patch fixes this by using pooloptname, which will be "inputpool"
in this case and "pool" in other cases, as error message.
We have a new vol type "dir" in addition to "file" and "block", but
virsh doesn't know it. Fix it.
Additionally, the patch lets virsh output "unknown" if not matched
any of them.
Clarify some of the effects of managed passthrough <hostdev> devices;
with recent changes (commit d093547), a nodedev-reattach is only needed
to pair up to an explicit nodedev-dettach (but beware that older
virt-manager has a bug where it uses explicit nodedev-dettach under the
hood when using the gui to hotplug a hostdev device).
* docs/formatdomain.html.in: Mention reattach.
* tools/virsh.pod (nodedev): Mention managed mode.
Rather than having to do:
$ virsh snapshot-revert dom $(virsh snapshot-current dom --name)
I thought it would be nice to do:
$ virsh snapshot-revert dom --current
I didn't add 'virsh snapshot-dumpxml --current' since we already have
'virsh snapshot-current' for the same task. snapshot-list accepted
a name but did not require it, and that remains the case, with
--current serving in place of that name. For all other commands,
name used to be required, and can now be replaced by --current;
I intentionally made it so that omitting both --current and a name
is an error (having the absence of a name imply --current seems
just a bit too magic, so --current must be explicit). I also had
to keep snapshot-edit backwards-compatible, as the only command
that already had a --current argument alongside a name, which still
works to both edit a named snapshot and make it current.
* tools/virsh.c (vshLookupSnapshot): New helper function.
(cmdSnapshotEdit, cmdSnapshotList, cmdSnapshotParent)
(cmdSnapshotDelete, cmdDomainSnapshotRevert): Use it, adding an
option where needed.
* tools/virsh.pod (snapshot-delete, snapshot-edit)
(snapshot-list, snapshot-parent, snapshot-revert): Document
use of --current.
(snapshot-dumpxml): Mention alternative.
I got these distcheck failures with sanlock enabled:
ERROR: files left in build directory after distclean:
./tools/virt-sanlock-cleanup
./src/locking/qemu-sanlock.conf
* src/Makefile.am (DISTCLEANFILES) [HAVE_SANLOCK]: Clean built
file.
* tools/Makefile.am (DISTCLEANFILES): Likewise.
Given a list of snapshots and their parents, finding all descendants
requires a hairy traversal. This code is O(n^3); it could maybe be
made to scale O(n^2) with the use of a hash table, but that costs more
memory. Hopefully there aren't too many people with a hierarchy
so large as to approach REMOTE_DOMAIN_SNAPSHOT_LIST_NAMES_MAX (1024).
* tools/virsh.c (cmdSnapshotList): Add final fallback.
Iterating over one level of children requires parsing all snapshots
and their parents; a bit of code shuffling makes it pretty easy
to do this as well.
* tools/virsh.c (cmdSnapshotList): Add another fallback.
Emulating --from requires grabbing the entire list of snapshots
and their parents, and recursively iterating over the list from
the point of interest - but we already do that for --tree. This
turns on emulation for that situation.
* tools/virsh.c (__vshControl): Rename member.
(vshReconnect, cmdConnect, vshGetSnapshotParent): Update clients.
(cmdSnapshotList): Add fallback.
