This change was generated using the following spatch:
@ rule1 @
expression a;
identifier f;
@@
<...
- f(*a);
... when != a;
- *a = NULL;
+ g_clear_pointer(a, f);
...>
@ rule2 @
expression a;
identifier f;
@@
<...
- f(a);
... when != a;
- a = NULL;
+ g_clear_pointer(&a, f);
...>
Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two places where a variable passed to VBOX_RELEASE()
macro is set to NULL explicitly. There is no need for that
because the macro sets the variable to NULL already.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libxl driver reconnects to all running VMs when libvirtd is restarted,
but it failed to mark auto-allocated graphics ports as set in the port
allocator. If many VMs are running that use port auto-allocation and
libvirtd is restarted, the port allocator is likely to hand out a port
already in use when a new VM is created that uses auto-allocation. VM
creation will fail due to the port clash.
When reconnecting to running VMs after a libvirtd restart, let the port
allocator know about previously allocated ports.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify 'qemuProcessGetVCPUQOMPath' to take the detected QOM path of the
first vCPU which is always present as the QOM path used our code probing
CPU flags via 'qom-get'.
This is needed as upcoming qemu will change it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/272
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2051451
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit we need to probe the vcpus first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming changes will require that we have a proper QOM path for cpus
when querying the flags as qemu is going to change it.
By moving the flag probing code later we'll already probe the QOM paths
so no re-query will be needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QOM path will be needed by code which is querying the cpu flags via
'qom-get' and thus needs a valid QOM path to the vCPU.
Add it into the private data and transfer from the queried data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all code using the 'QOM_CPU_PATH' macro to accept the QOM path
as an argument.
For now the new helper for fetching the path 'qemuProcessGetVCPUQOMPath'
will always return the same hard-coded value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory clearing and remove the 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is used only as a helper in src/qemu/qemu_monitor_json.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This directory contains runtime state, not persistent state.
The latter goes into swtpmStorageDir.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When looping over TPM devices for a domain, we can avoid calling
this function for each iteration and call it once per domain
instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Using the word "create" can give users the impression that disk
operations will be performed, when in reality all these functions
do is string formatting.
Follow the naming convention established by virBuildPath(),
virFileBuildPath() and virPidFileBuildPath().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This leaves qemuExtTPMCleanupHost() to only deal with looping
over TPM devices, same as other qemuExtTPMDoThing() functions.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This leaves qemuExtTPMSetupCgroup() to only deal with looping
over TPM devices, same as other qemuExtTPMDoThing() functions.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Other functions that operate on a single TPM emulator follow
the qemuTPMEmulatorDoThing() naming convention.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
As the parent address is part of the mdev nodedev name lets expose the
internally available parent address in the XML.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we are about to spawn QEMU, we validate the domain
definition against qemuCaps. Except when domain is/was already
running before (i.e. on incoming migration, snapshots, resume
from a file). However, especially on incoming migration it may
happen that the destination QEMU is different to the source
QEMU, e.g. the destination QEMU may have some devices disabled.
And we have a function that validates devices/features requested
in domain XML against the desired QEMU capabilities (aka
qemuCaps) - it's virDomainDefValidate() which calls
qemuValidateDomainDef() and qemuValidateDomainDeviceDef()
subsequently.
But the problem here is that the validation function is
explicitly skipped over in specific scenarios (like incoming
migration, restore from a snapshot or previously saved file).
This in turn means that we may spawn QEMU and request
device/features it doesn't support. When that happens QEMU fails
to load migration stream:
qemu-kvm: ... 'virtio-mem-pci' is not a valid device model name
(NB, while the example shows one particular device, the problem
is paramount)
This problem is easier to run into since we are slowly moving
validation from qemu_command.c into said validation functions.
The solution is simple: do the validation in all cases. And while
it may happen that users would be unable to migrate/restore a
guest due to a bug in our validator, spawning QEMU without
validation is worse (especially when you consider that users can
supply their own XMLs for migrate/restore operations - these were
never validated).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2048435
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The binary validation in virPidFileReadPathIfAlive may fail with EACCES
if the calling process does not have CAP_SYS_PTRACE capability.
Therefore instead do only the check that the pidfile is locked by the
correct process.
Fixes the same issue as with swtpm.
Signed-off-by: Vasiliy Ulyanov <vulyanov@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Access to /proc/[pid]/exe may be restricted in certain environments (e.g.
in containers) and any attempt to stat(2) or readlink(2) the file will
result in 'permission denied' error if the calling process does not have
CAP_SYS_PTRACE capability. According to proc(5) manpage:
Permission to dereference or read (readlink(2)) this symbolic link is
governed by a ptrace access mode PTRACE_MODE_READ_FSCREDS check; see
ptrace(2).
The binary validation in virPidFileReadPathIfAlive may fail with EACCES.
Therefore instead do only the check that the pidfile is locked by the
correct process. To ensure this is always the case the daemonization and
pidfile handling of the swtpm command is now controlled by libvirt.
Signed-off-by: Vasiliy Ulyanov <vulyanov@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function will attempt to read a pid from @path, and store it in
@pid. The @pid will only be set, however, if @path is locked by
virFileLock() at byte 0 and the pid in @path is running.
Signed-off-by: Vasiliy Ulyanov <vulyanov@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The @unique argument didn't exist even when the function was
introduced in a042275a39, and the @vm argument was not renamed
when the function was changed to take a virDomainDef* instead of
a virDomainObj* in 7ed6934f3b.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous commits, the set of NICs that work well with
Libvirt was extended. Document this change.
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SmartNIC DPUs may not expose some privileged eswitch operations
to the hypervisor hosts. For example, this happens with Bluefield
devices running in the ECPF (default) mode for security reasons. While
VF MAC address programming is possible via an RTM_SETLINK operation,
trying to set a VLAN ID in the same operation will fail with EPERM.
The equivalent ip link commands below provide an illustration:
1. This works:
sudo ip link set enp130s0f0 vf 2 mac de:ad:be:ef:ca:fe
2. Setting (or clearing) a VLAN fails with EPERM:
sudo ip link set enp130s0f0 vf 2 vlan 0
RTNETLINK answers: Operation not permitted
3. This is what Libvirt attempts to do today (when trying to clear a
VF VLAN at the same time as programming a VF MAC).
sudo ip link set enp130s0f0 vf 2 vlan 0 mac de:ad:be:ef:ca:fe
RTNETLINK answers: Operation not permitted
If setting an explicit VLAN ID results in an EPERM, clearing a VLAN
(setting a VLAN ID to 0) can be handled gracefully by ignoring the
EPERM error with the rationale being that if we cannot set this state
in the first place, we cannot clear it either.
In order to keep explicit clearing of VLAN ID working as it used to
be passing a NULL pointer for VLAN ID is used.
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There should be a way to show no intent in programming a VLAN at all
(including clearing it). This allows handling error conditions
differently when VLAN clearing is explicit (vlan id == 0) vs implicit
(vlanid == NULL - try to clear it if possible).
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This has a benefit of being able to handle error codes for those
operations separately which is useful when drivers allow setting a MAC
address but do not allow setting a VLAN (which is the case with some
SmartNIC DPUs).
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most people will want to use isa-debugcon to obtain debug output
for SeaBIOS / EDK II, so let's include a ready-made example for
that scenario in our documentation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virCHMonitorGetIOThreads returns an int, not size_t.
Also return early if it's negative, because promoting it to
an unsigned type in the for loop condition could lead to
an infinte loop.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Report an error upfront if the binary does not exist
or is not executable.
https://bugzilla.redhat.com/show_bug.cgi?id=1999372
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Some files do not include what they use and rely on virutil.h
to pull in the necessary header files.
Fix it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The current implementation of the workaround for yajl's broken
pkg-config file accidentally overwrites the value of includedir
that is later used by the installation process. Rename the
local variable to avoid this issue.
Fixes: c97075e1e4
Closes: https://gitlab.com/libvirt/libvirt/-/issues/271
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The XML-to-XML test validates that we don't accidentally copy the
isa-debug <serial> into a <console>.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce support for
<serial type='pty'>
<target type='isa-debug'>
<model type='isa-debugcon'/>
</target>
<address type='isa' iobase='0x402'/>
</console>
which is used as a way to receive debug messages from the
firmware on x86 platforms.
Note that the default port is hypervisor specific, with QEMU
currently using 0xe9 since that's the original Bochs debug port.
For use with SeaBIOS/OVMF, the iobase port needs to be explicitly
set to 0x402.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The serial port model cannot be allowed to change across migration
as it affects ABI.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
