Unused as of:
commit 446d091498
libxl: pass driver config to libxlMakeDomBuildInfo
All other usage of LIBXL_HAVE_DEVICE_CHANNEL was removed by:
commit e58004d70a
Xen: Remove unneeded LIBXL_HAVE_* ifdefs
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in 4.3.0 by xen commit:
commit ef496b81f0336f09968a318e7f81151dd4f5a0cc
libxl: postpone backend name resolution
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Any active domain has a copy in the privateData, filled in
qemuProcessInit.
Move the qemu capability check below the activeness check and remove
the extra lookup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Apparently, some of '&*variable' slipped in. Drop '&*' and access
the variable directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
We require the header and the secret to be present.
Use a different approach to virParams to report an error if they
are not present, instead of trying to pass empty arguments to QEMU
via QMP.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove pointless 'ret', cmd variable reuse and use g_auto.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto, split the double use of 'cmd' variable and remove useless
ret variable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate the two uses of 'cmd' to avoid mixing manual and automatic
cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reduce the scope of the variable to avoid renaming it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic cleanup and remove the 'ret' variable in favor of
direct returns.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In domain_cgroup.c there's VIR_GET_LIMIT_PARAMETER macro which
has a semicolon at the end of its declaration. Well, remove it so
that the places where macro is used have to put the semicolon
explicitly. This helps with automatic reformatting (at least in
vim).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
using virCHProcessSetupPid
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Enable support of VIR_DRV_FEATURE_TYPED_PARAM_STRING to enable numatune
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The chDomObjFromDomain() function which currently lives as a
static one in ch_driver.c is going to be needed in other parts
of the driver. Move it into ch_domain.c, rename to
virCHDomainObjFromDomain() and expose in corresponding header
file for the rest of the driver to use.
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Refactor some cgroup management methods from qemu into hypervisor.
These methods will be shared with ch driver for cgroup management.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A <hostdev/> can have <address type='unassigned'/> which means
libvirt manages the device detach from/reattach to the host but
the device is never exposed to the guest. This means that we have
to take a shortcut during hotunplug (e.g. never ask QEMU on the
monitor to detach the device, or never wait for DEVICE_DELETED
event).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A <hostdev/> can have <address type='unassigned'/> which means
libvirt manages the device detach from/reattach to the host but
the device is never exposed to the guest. This means that we have
to take a shortcut during hotplug, similar to the one we are
taking when constructing the command line (see
qemuBuildHostdevCommandLine()).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2040548
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We document that <address type='unassigned'/> can be used only
for <hostdev/>-s. However, corresponding validation rule is
missing. Let's put the rule into hypervisor agnostic part of
validation process so that all drivers can benefit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unfortunately, udev doesn't set ID_TYPE attribute for NVMe disks,
therefore we have to add another case into udevKludgeStorageType()
to treat /dev/nvme* devlinks as any other disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2045953
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The udevKludgeStorageType() function looks at devlink name
(/dev/XXX) and guesses the type of the (storage) device using a
series of STRPREFIX() calls. Well those can be turn into an array
and a for() loop, especially if we are about to add a new case
(in the next commit).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are a some scenarios in which we want to prealloc guest
memory (e.g. when requested in domain XML, when using hugepages,
etc.). With 'regular' <memory/> models (like 'dimm', 'nvdimm' or
'virtio-pmem') or regular guest memory it is corresponding
memory-backend-* object that ends up with .prealloc attribute
set. And that's desired because neither of those devices can
change its size on the fly. However, with virtio-mem model things
are a bit different. While one can set .prealloc attribute on
corresponding memory-backend-* object it doesn't make much sense,
because virtio-mem can inflate/deflate on the fly, i.e. change
how big of a portion of the memory-backend-* object is exposed to
the guest. For instance, from a say 4GiB module only a half can
be exposed to the guest. Therefore, it doesn't make much sense to
preallocate whole 4GiB and keep them allocated. But we still want
the part exposed to the guest preallocated (when conditions
described at the beginning are met).
Having said that, with new enough QEMU the virtio-mem-pci device
gained new attribute ".prealloc" which instructs the device to
talk to the memory backend object and allocate only the requested
portion of memory.
Now, that our algorithm for setting .prealloc was isolated in a
single function, the function can be called when constructing cmd
line for virtio-mem-pci device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new capability tracks whether virtio-mem device is capable
of memory preallocation, which is detected by the device having
.prealloc attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuBuildMemoryGetPagesize() function has everything is needs
to decide whether preallocation is needed or not. Move the logic
from qemuBuildMemoryBackendProps() into
qemuBuildMemoryGetPagesize().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuBuildMemoryBackendProps() function is already long
enough. Move code that decides what hugepages to use into a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @mem agrument of qemuBuildMemoryDeviceProps() function is
only read from. Make this fact obvious from the function
declaration too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, virDomainClockDef is formatted inside
virDomainDefFormatInternalSetRootName() which is already long
enough. Move the code into a new function
(virDomainClockDefFormat()) and make the code use
virXMLFormatElement() while at it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function never returns an error, make it void then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement() to simplify virDomainTimerDefFormat().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @mode member of the _virDomainTimerDef struct stores
values of the virDomainTimerModeType enum, or -1 for the
default value (when user provided no value in XML).
This is needlessly complicated. Introduce new value to the enum
which reflects the default state.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @track member of the _virDomainTimerDef struct stores
values of the virDomainTimerTrackType enum, or -1 for the
default value (when user provided no value in XML).
This is needlessly complicated. Introduce new value to the enum
which reflects the default state.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @tickpolicy member of the _virDomainTimerDef struct stores
values of the virDomainTimerTickpolicyType enum, or -1 for the
default value (when user provided no value in XML).
This is needlessly complicated. Introduce new value to the enum
which reflects the default state.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the _virDomainTimerDef structure we have @present member which
is like virTristateBool, except it's an integer and has values
shifted by one. This is harder to read. Retype the member to
virTristateBool which we are familiar with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function never returns an error, make it void then. And
while at it, make the @src argument const to make it obvious it's
never changed inside the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller of this function
(qemuProcessFindCharDevicePTYsMonitor()) doesn't pass NULL.
Remove corresponding check from virDomainChrSourceDefCopy().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of virDomainChrSourceDefCopy() is to make a deep copy of
given virDomainChrSourceDef. However, some types were not copied
at all (VIR_DOMAIN_CHR_TYPE_SPICEVMC and
VIR_DOMAIN_CHR_TYPE_SPICEPORT) and some members weren't copied
either (@logfile, @logappend).
After this, there are still some members that are not copied
(seclabels and private data), but the sole caller
qemuProcessFindCharDevicePTYsMonitor() doesn't seem to care.
Therefore, just document this behavior so that future user is
aware.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is some code that validates whether parsed @bus <input/>
makes sense (e.g. some hypervisors have their own type of bus).
But this code should not live in the parser, but validator
rather. That way, we can also validate that the value we compute
(if user didn't provide any) is valid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Compiler isn't able to see that 'virDevMapperGetTargets' in cases e.g.
when the devmapper isn't available may not initialize the value in the
pointer passed as the second argument.
The usage 'qemuDomainSetupDisk' lead to an accidental infinite loop as
previous calls apparently doctored the stack to a point where
'g_slist_concat' would end up in an infinite loop trying to find the end
of the list.
Fixes: 6c49c2ee9f
Closes: https://gitlab.com/libvirt/libvirt/-/issues/268
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The function should be used to check if qemu capabilities include a
hardware acceleration, i.e. accel is not TCG.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It replaces hardcoded checks for KVM. It'll be cleaner to use
the function once multiple accelerators are supported in the
QEMU driver.
Explicit KVM domain checks should be done only when a feature is
available only for KVM.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This makes possible to add more accelerators by touching less code and
reduces code duplication.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There's no QMP command for querying if hvf is supported, therefore we
use sysctl interface that tells if Hypervisor.framework works/available
on the host.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU supports Hypervisor.framework since 2.12 as hvf accel.
Hypervisor.framework provides a lightweight interface to run a virtual
cpu on macOS without the need to install third-party kernel
extensions (KEXTs).
It's supported since macOS 10.10 on machines with Intel VT-x feature
set that includes Extended Page Tables (EPT) and Unrestricted Mode.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
