The top level heading didn't contain the word 'port'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Fix the referenced anchor in 'formatdomain.rst' right away.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The first sentence was moved up a paragraph to stop treating the first
sub-heading as a page subtitle.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Instead of creating an empty object and then setting keys one
at a time, it is possible to pass a dict object to
configuration_data(). This is nicer because it doesn't require
repeating the name of the cfg_data object over and over.
There is one exception: the 'conf' object, where we store values
that are used directly by C code. In that case, using a dict
object is not feasible for two reasons: first of all, replacing
the set_quoted() calls would result in awkward code with a lot
of calls to format(); moreover, since code that modifies it is
sprinkled all over the place, refactoring it would probably
make things more complicated rather than simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The default values used by the library are determined at configure
time based on a number of factors, and we should reflect them in
the installed configuration file to make the comments it contains
more useful.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/263
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the workaround is specific to macOS, only disable compiler
warnings when building on that platform.
While at it, update the comment to reflect the fact that the
workaround is needed for all versions of the OS, including the
modern ones that we currently target.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recent refactor (v8.1.0-217-ga193f4bef6) generalized job related enums
and functions by changing "qemu" prefix to "vir" and moving them to
src/hypervisor/domain_job.[ch]. This was in most cases a good thing, but
async job phases are driver specific and the corresponding functions
remained in src/qemu/qemu_domainjob.[ch], but still their prefix was
changed to "vir". Let's change it back to "qemu".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Document either my contributions or commits I helped review for
the upcoming release.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
I've came across an aarch64 system which supports hugepages up to
16GiB of size. However, I was unable to allocate them using
virsh allocpages. This is because cmdAllocpages() uses
vshCommandOptScaledInt(), which scales passed value into bytes,
but since the virNodeAllocPages() expects size in KiB the
variable holding bytes is then divided by 1024. However, the
limit for the biggest value passed to vshCommandOptScaledInt() is
UINT_MAX which is now obviously wrong, as it needs to be UINT_MAX
* 1024.
The same bug is in completer. But here, let's use ULLONG_MAX so
that we don't have to care about it anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While commit a5e659f0 removed the restriction against multiple queues
for the vdpa net device, there were some missing pieces. Configuring a
device statically and then starting the domain worked as expected, but
hotplugging a device didn't have the expected multiqueue support
enabled. Add the missing bits.
Consider the following device xml:
<interface type="vdpa">
<mac address="00:11:22:33:44:03" />
<source dev="/dev/vhost-vdpa-0" />
<model type="virtio" />
<driver queues='2' />
</interface>
Without this patch, hotplugging the above XML description resulted in
the following:
{"execute":"netdev_add","arguments":{"type":"vhost-vdpa","vhostdev":"/dev/fdset/0","id":"hostnet1"},"id":"libvirt-392"}
{"execute":"device_add","arguments":{"driver":"virtio-net-pci","netdev":"hostnet1","id":"net1","mac":"00:11:22:33:44:03","bus":"pci.5","addr":"0x0"},"id":"libvirt-393"}
With the patch, hotplugging results in the following:
{"execute":"netdev_add","arguments":{"type":"vhost-vdpa","vhostdev":"/dev/fdset/0","queues":2,"id":"hostnet1"},"id":"libvirt-392"}
{"execute":"device_add","arguments":{"driver":"virtio-net-pci","mq":true,"vectors":6,"netdev":"hostnet1","id":"net1","mac":"00:11:22:33:44:03","bus":"pci.5","addr":"0x0"},"id":"libvirt-393"}
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2024406
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In 0895a0e, it was noted that the "sockets" value in the topology
section of capabilities reflects not the number of sockets per NUMA
node, not the total number.
Unfortunately, the fix was applied to the wrong place: the domain XML
format documentation, not that for the capabilities output. And, in
fact, the domain XML interprets "sockets" as the total number, not a
per-node value.
Back out this change in favour of a note in the capabilities
documentation instead.
Fixes: 0895a0e75d
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
The callback ID can be zero, not necessarily positive; correct the
comment to reflect this.
Signed-off-by: John Levon <levon@movementarian.org>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When changing the size of pipe that virFileWrapperFdNew() creates
we start at 1MiB and if that fails because it's above the system
wide limit we get EPERM and continue with half of the size.
However, we might get another error in which case we should
report proper system error and return failure from
virFileWrapperFdNew().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Apply the user-requested changes to the device definition as requested
by the <qemu:deviceOverride> element from the custom qemu XML namespace.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/287
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The definition object will be later used to access the qemu namespace
definition used to override device properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Taint the domain object when the user requests custom device properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patches will add possibility to override configuration of a
device with custom properties as a more versatile replacement to using
QEMU's '-set' parameter, which doesn't work when we use JSON to
instantiate devices.
Describe the XML used for the override as well as expectations of
upstream support in case something breaks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
currently the only user of virFileWrapperFdNew is the qemu driver;
virsh save is very slow with a default pipe size.
This change improves throughput by ~400% on fast nvme or ramdisk.
Best value currently measured is 1MB, which happens to be also
the kernel default for the pipe-max-size.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When vTPM is secured via virSecret libvirt passes the secret
value via an FD when swtpm is started (arguments --key and
--migration-key). The writing of the secret into the FDs is
handled via virCommand, specifically qemu_tpm calls
virCommandSetSendBuffer()) and then virCommandRunAsync() spawns a
thread to handle writing into the FD via
virCommandDoAsyncIOHelper. But the thread is not created unless
VIR_EXEC_ASYNC_IO flag is set, which it isn't. In order to fix
it, virCommandDoAsyncIO() must be called.
The credit goes to Marc-André Lureau
<marcandre.lureau@redhat.com> who has done all the debugging and
proposed fix in the bugzilla.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2064115
Fixes: a9c500d2b5
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This reverts commit 06c960e477.
Turns out, this feature is not needed and QEMU will fix TSC
without any intervention from outside.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>P
This reverts commit 150540394d.
Turns out, this feature is not needed and QEMU will fix TSC
without any intervention from outside.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>P
