The refactor of 'udevListInterfacesByStatus()' which attempted to make
it usable as backend for 'udevNumOfInterfacesByStatus()' neglected to
consider the corner case of 'g_new0(..., 0)' returning NULL if the user
actually requests 0 elements.
As the code was modified to report the full number of interfaces in the
system when the list of names is NULL, the RPC code would be asked to
serialize a NULL-list of interface names with declared lenth of 1+
causing a crash.
To fix this corner case we make callers pass '-1' as @names_len (it's
conveniently an 'int' due to RPC type usage) if they don't wish to fetch
the actual list and convert all decisions to be done on @names_len being
non-negative instead of @names being non-NULL.
CVE-2024-8235
Fixes: bc596f2751
Resolves: https://issues.redhat.com/browse/RHEL-55373
Reported-by: Yanqiu Zhang <yanqzhan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This advertises the feature only for the architectures and
machine types where it can actually be used.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We will soon need to use it in a context where we don't have
a virDomainDef handy.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Originally nicindexes were updated only for VIR_DOMAIN_NET_TYPE_BRIDGE
and VIR_DOMAIN_NET_TYPE_DIRECT. The mentioned commit adds support for
NAT network mode and changes the code to update nicindexes for
VIR_DOMAIN_NET_TYPE_ETHERNET and VIR_DOMAIN_NET_TYPE_NETWORK as well.
It doesn't work as intended and after the change nicindexes are updated
only for VIR_DOMAIN_NET_TYPE_ETHERNET and VIR_DOMAIN_NET_TYPE_NETWORK.
Fixes: aa64209073
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Inside of virschematest.c there's testSchemaDir() which iterates
over dentries in given directory but skips some files: those
without ".xml" suffix, hidden files, symlinks, etc.
Now, symlinks are detected as g_lstat() + S_ISLNK() combo which
works, except it fails to compile on mingw where is no concept of
symlinks. Replace the combo with a call to virFileIsLink() which
at least allows us to compile cleanly on mingw.
Fixes: f997fcca71
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
It's possible to hit the following situation during qemu p2p live
migration:
1. qemu has live migrated and exited (making virDomainObjIsActive()
return false)
2. the live migration job is still in progress, waiting for a
confirmation from the remote libvirt daemon. This may last for
a while with a presence of networking issues (up to keepalive
timeout).
Any attempt to start the domain again would fail with "domain is already
being started" message which is misleading in this situation as it
doesn't reflect what's really happening.
Add a check for the migration job and report a different error message
if the migration job is still running.
Signed-off-by: Sergey Dyasli <sergey.dyasli@nutanix.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Mingw build failed after commit af87ee7927
as 'socketpair()' is not available on that platform.
Stub out the function to return failure.
Fixes: af87ee7927
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
'bhyveConnectGetType' (which is called from 'virConnectGetType') returns
'BHYVE' as the type, but the code in 'remoteDispatchConnectOpen'
responsible for selecting the sub-driver URIs in modular deployment
checks for 'bhyve' and thus would not properly fill the URIs to the
sub-daemons.
Signed-off-by: aokblast <aokblast@FreeBSD.org>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
From: Praveen K Paladugu <prapal@linux.microsoft.com>
enable VIR_DOMAIN_NET_TYPE_NETWORK network support for ch guests.
Tested with following config:
<interface type='network'>
<source network="default" bridge='virbr0'/>
<model type='virtio'/>
<driver queues="1"/>
</interface>
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
From: Praveen K Paladugu <prapal@linux.microsoft.com>
Move methods to connect domain interfaces to host bridges to hypervisor.
This is to allow reuse between qemu and ch drivers.
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu supports this enlightenment since version 7.10.
From the qemu commit:
Hyper-V specification allows to pass parameters for certain hypercalls
using XMM registers ("XMM Fast Hypercall Input"). When the feature is
in use, it allows for faster hypercalls processing as KVM can avoid
reading guest's memory.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
qemu supports this enlightenment since version 7.10.
From the qemu commit:
The newly introduced enlightenment allow L0 (KVM) and L1 (Hyper-V)
hypervisors to collaborate to avoid unnecessary updates to L2
MSR-Bitmap upon vmexits.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, qemuProcessStop() unlocks given domain object right in
the middle of cleanup process. This is dangerous because there
might be another thread which is executing virDomainObjListAdd().
And since the domain object is on the list of domain objects AND
by the time qemuProcessStop() unlocks it the object is also
marked as inactive, the other thread acquires the lock and
switches vm->def pointer.
The unlocking of domain object is needed though, to allow even
processing thread finish its queue. Well, the processing can be
done before any cleanup is attempted.
Therefore, use freshly introduced virEventThreadStop() to join
the event thread and drop lock/unlock from the middle of
qemuProcessStop().
Now, there's a comment being removed that mentions
qemuDomainObjStopWorker() and why it has to be called only after
the domain is marked as dead. This comment is no longed
applicable because call to qemuDomainObjStopWorker() is removed
also. Moreover, priv->beingDestroyed is set to true before
unlocking the domain object, thus any event processing callback
is going to see the domain being destroyed and can chose to
either exit early or finish processing event.
Fixes: 3865410e7f
Resolves: https://issues.redhat.com/browse/RHEL-49607
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The aim is to move parts of vir_event_thread_finalize() that MAY
block into a separate function, so that unrefing the a
virEventThread no longer blocks (or require releasing and
subsequent re-acquiring of a mutex).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce tests to verify that the 'ps2' feature is correctly parsed
when given either 'dirty' XML from a user or 'clean' canonical XML,
as produced by libvirt. This also tests the transformation from libvirt's
internal state to the aforementioned canonical form and to a QEMU
command line.
As a bonus, we also test some known bad configurations:
- When user explicitly adds ps2 bus inputs, but also explicitly disables
the 'ps2' feature.
- When user explicitly enables the 'vmport' feature, but also explicitly
disables the 'ps2' feature. This is not supported by QEMU and will
result in vmport device not being created without emitting any warning
or error.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This introduces a new 'ps2' feature which, when disabled, results in
no implicit PS/2 bus input devices being automatically added to the
domain and addition of the 'i8042=off' machine option to the QEMU
command-line.
A notable side effect of disabling the i8042 controller in QEMU is that
the vmport device won't be created. For this reason we will not allow
setting the vmport feature if the ps2 feature is explicitly disabled.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability tells us whether given QEMU binary supports the
'-machine xxx,i8042=on/off' toggle used to enable/disable PS/2
controller emulation.
A few facts:
- This option was introduced in QEMU 7.0 and defaults to 'on'
- QEMU versions before 7.0 enabled i8042 controller emulation implicitly
- This option (and i8042 controller emulation itself) is only supported
by descendants of the generic PC machine type (e.g. i440fx, q35, etc.)
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Up until now, we've assumed that all x86 machines have a PS/2
controller built-in. This assumption was correct until QEMU v4.2
introduced a new x86-based machine type - microvm.
Due to this assumption, a pair of unnecessary PS/2 inputs are implicitly
added to all microvm domains. This patch fixes that by whitelisting
machine types which are known to include the i8042 PS/2 controller.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Attempting to start qemu with or hotplug an empty 'usb-storage' based
disk results in the following error:
qemu-system-x86_64: -device {"driver":"usb-storage","bus":"usb.0","port":"2","id":"usb-disk1","removable":true}: drive property not set
Reject such config at validation step and adjust tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Some code paths, such as if hotplug of an empty cdrom fails can cause
that 'qemuBlockStorageSourceChainDetach' will be called with 'NULL'
@data as there is no backend for the disk.
The above case became possible once we allowed hotplug of cdroms and
subsequently fixed the case when users would hotplug an empty cdrom
which ultimately caused the possibility of having no backend in the
hotplug code path which was not possible before (see 'Fixes:' below and
also the commit linked from there).
Make 'qemuBlockStorageSourceChainDetach' tolerate NULL @data by simply
returning early.
Fixes: 894c6c5c16
Resolves: https://issues.redhat.com/browse/RHEL-54550
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In its commit v9.0.0-rc0~1^2 QEMU started to read
/proc/sys/vm/max_map_count file to set up coroutine limits better
(something about VMAs, mmap(), see the commit for more info).
Allow the file in apparmor profile.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/660
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since we use 'tc' to set QoS, or we instruct OVS which then uses
'tc', we have to make sure values are within range acceptable to
'tc'.
Resolves: https://issues.redhat.com/browse/RHEL-45200
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function validates whether parsed limits are within range as
defined by 'tc' sources (since we use tc to set QoS; or OVS which
then uses tc too). The 'tc' program stores speeds in 64bit
integers (unit is bytes per second) and sizes in uints (unit is
bytes). We use different units: kilobytes per second and
kibibytes and therefore we can parse values larger than 'tc' can
handle and thus need a function to check if values still fit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Instead of having many if-else statements, each with its own
vshTableRowAppend() call, we can use a simple trick - have an
array of string pointers, set array members in the if bodies and
then call vshTableRowAppend() once.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All calls to vshTableRowAppend() inside of cmdList() share couple
of same arguments: domain ID, domain name and domain state. While
the first one is stored in a variable and then passed to all
vshTableRowAppend() calls, the others are passed as a function
call. Switch the latter to variables too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is a family of convenient macros: NULLSTR, NULLSTR_EMPTY,
NULLSTR_STAR, NULLSTR_MINUS which hides ternary operator.
Generated using the following spatch (and its obvious variants):
@@
expression s;
@@
<+...
- s ? s : "<null>"
+ NULLSTR(s)
...+>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Check for the last multipart message right as the first thing. The
presumption probably was that the last message might still contain a
payload we want to parse. However that cannot be true since that would
have to be a type RTM_NEWNEIGH. This was not caught because older
kernels were note sending NLMSG_DONE and probably relied on the fact
that the parsing just stops after all the messages are walked through,
which the NLMSG_OK macro successfully did.
Resolves: https://issues.redhat.com/browse/RHEL-52449
Resolves: https://bugzilla.redhat.com/2302245
Fixes: a176d67cdf
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The previous check was all wrong since it calculated the how long would
the netlink message be if the netlink header was the payload and then
subtracted that from the whole message length, a variable that was not
used later in the code. This check can fail if there are no additional
payloads, struct rtattr in particular, which we are parsing later,
however the RTA_OK macro would've caught that anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Use convenience macro which does almost the same thing we were doing,
but also pads out the payload length to a multiple of NLMSG_ALIGNTO (4)
bytes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This will allow to print full domains info:
Id Name State UUID
---------------------------
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It was released on June 12, 2024.
The update means we no longer have to care about json-c 0.13
present in Leap 15.5, which solves some whitespace issues in
tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Some JSON parsers do not like bare types outside of objects or arrays
or do validation of object key uniqueness.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
