After guest is started, or we are reconnecting to already running
one (after daemon restart), qemuProcessRefreshRxFilters() is
called to refresh rx-filters (basically MAC addresses of guest
NICs) as they might have changed while we were not running (for
the case when reconnecting to an already running guest), or we
need to enable them by running a command (for freshly started
guest - see processNicRxFilterChangedEvent()).
Now, our XML parser allowed trustGuestRxFilters attribute for all
types and models of <interface/> while in reality, only virtio
model AND TUN/TAP based types can see MAC address changes. For
other combinations, QEMU reports an error.
This all means that when the daemon is restarted and it
reconnects to a guest with, well invalid configuration, or when
such guest is restored from a saved image, or migrated then we
issue the monitor command, to which QEMU replies with an error
which is then propagated to users:
error: internal error: unable to execute QEMU command 'query-rx-filter': invalid net client name: hostdev0
While on one hand users should fix their configuration (and after
v10.0.0-rc1~123 they can do that even on live domains), libvirt
can also has some logic built in that prevent issuing the command
in the first place (for obviously wrong cases).
Fixes: 060d4c83ef
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This should fix build failures when a daemon code is compiled before the
included *_protocol.h headers are ready, such as:
FAILED: src/virtqemud.p/remote_remote_daemon_config.c.o
../src/remote/remote_daemon_config.c: In function ‘daemonConfigNew’:
../src/remote/remote_daemon_config.c:111:30: error:
‘REMOTE_AUTH_POLKIT’ undeclared (first use in this function)
111 | data->auth_unix_rw = REMOTE_AUTH_POLKIT;
| ^~~~~~~~~~~~~~~~~~
../src/remote/remote_daemon_config.c:111:30: note: each undeclared
identifier is reported only once for each function it appears in
../src/remote/remote_daemon_config.c:115:30: error:
‘REMOTE_AUTH_NONE’ undeclared (first use in this function)
115 | data->auth_unix_rw = REMOTE_AUTH_NONE;
| ^~~~~~~~~~~~~~~~
../src/remote/remote_daemon_config.c: In function
‘daemonConfigLoadOptions’:
../src/remote/remote_daemon_config.c:252:31: error:
‘REMOTE_AUTH_POLKIT’ undeclared (first use in this function)
252 | if (data->auth_unix_rw == REMOTE_AUTH_POLKIT) {
| ^~~~~~~~~~~~~~~~~~
or
FAILED: src/virtqemud.p/remote_remote_daemon_dispatch.c.o
In file included from ../src/remote/remote_daemon.h:28,
from ../src/remote/remote_daemon_dispatch.c:26:
src/remote/lxc_protocol.h:13:5: error:
unknown type name ‘remote_nonnull_domain’
13 | remote_nonnull_domain dom;
| ^~~~~~~~~~~~~~~~~~~~~
In file included from ../src/remote/remote_daemon.h:29,
from ../src/remote/remote_daemon_dispatch.c:26:
src/remote/qemu_protocol.h:13:5: error:
unknown type name ‘remote_nonnull_domain’
13 | remote_nonnull_domain dom;
| ^~~~~~~~~~~~~~~~~~~~~
src/remote/qemu_protocol.h:14:5: error:
unknown type name ‘remote_nonnull_string’
14 | remote_nonnull_string cmd;
| ^~~~~~~~~~~~~~~~~~~~~
...
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These values are currently unsupported for ssh disks, and in fact aren't
even parsed for ssh disks. So while this didn't result in any test
errors, we can remove them from the test input files.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
When trying to start nbdkit-backed disks in backing chains, we were
accidentally always checking the private data of the top of the chain
instead of using the loop variable.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Division between integers will also be integer.
Thus, to preserve fractional part explicitly
convert first operand to double.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 28d54aab05 ("examples: Introduce domtop")
Signed-off-by: Egor Makrushin <emakrushin@astralinux.ru>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since commit 4af3cbafdd the function always returns 0, so it is
possible to make this function void and remove return value checks.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Unify the output directory. Symlinks needed to be adapted to work
properly, but the 'qemuxml2argvdata' symlink can now be removed.
The virschematest exceptions needed to be moved to the proper directory
once the files are moved.
The unification of the output directory now also ensures that files
won't be forgotten once tests are removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Unify the naming of the data directory with the test name.
'tests/qemuxml2argvdata' is for the time converted to a symlink to
'qemuxmlconfdata', to preserve the symlinks in
'tests/qemuxml2xmloutdata'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Remove leftover output files. The list of files was identified by
temporarily hacking testConfXMLEnumerate to also enumerate
'tests/qemuxml2xmloutdata' directory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Include also the output files in the validation of used files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Populate the output filename strings only when the files are expected to
exist, so that other logic can be based on the presence of the strings
rather than having to re-check the test flags for expected state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There's plenty symlinks in qemuxml2argvdata and qemuxml2xmlout
directories pointing to other files in the same directory. It makes no
sense to check those files twice, thus we can simply skip symlinks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Current implementation of virDomainMemoryDefCheckConflict() does
only a one way comparison, i.e. if there's a memory device within
def->mems[] which address falls in [mem->address, mem->address +
mem->size] range (mem is basically an iterator within
def->mems[]). And for static XML this works just fine. Problem is
with hot/cold plugging of a memory device. Then mem points to
freshly parsed memory device and these half checks are
insufficient. Not only we must check whether an existing memory
device doesn't clash with freshly parsed memory device, but also
whether freshly parsed memory device does not fall into range of
already existing memory device.
Resolves: https://issues.redhat.com/browse/RHEL-4452
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
meson wraps python scripts already on win32, so we end up with these
failing commands:
[185/868] Generating src/rpc/virnetprotocol.h with a custom command
FAILED: src/rpc/virnetprotocol.h
"sh" "libvirt/scripts/meson-python.sh" "F:/msys64/ucrt64/bin/python3.EXE" "F:/msys64/ucrt64/bin/python.exe" "libvirt/scripts/rpcgen/main.py" "--mode=header" "../src/rpc/virnetprotocol.x" "src/rpc/virnetprotocol.h"
SyntaxError: Non-UTF-8 code starting with '\x90' in file F:/msys64/ucrt64/bin/python.exe on line 1, but no encoding declared; see https://peps.python.org/pep-0263/ for details
The issue was introduced in a62486b95f commit.
These changes are similar as e06beacec2 commit.
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Adapt the configuration of redirects from the server hosting libvirt.org
The redirect to the 'libvirt-console-proxy' Golang module is not adapted
as it doesn't exist on the current server.
NOTES:
- The redirects are currently configured for hosting via the
'gitlab.io/libvirt' URI. For hosting via custom domain it will need
to be rewritten to drop the '/libvirt' prefixes.
- gitlab pages doesn't currently support redirects to outside content,
thus most of the redirects don't actually work:
https://gitlab.com/gitlab-org/gitlab-pages/-/issues/601
- The redirects file is only installed in the webpage job but is not
actually distributed.
- The validity of the redirects can be checked by visiting:
https://libvirt.gitlab.io/_redirects
Having them installed allows us to validate them before we'll be
switching to use gitlab pages completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
On pushes to master publish the webpage (built in the 'website_job' job)
via gitlab pages. The 'pages' job uses the default image that gitlab
assumes as it's consuming artifacts from an existing job and naming
them properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The latest lcitool merged the 'prebuilt-env' and 'local-env' jobs into
one which use variables to pick up the right environment and steps
rather than duplicating everything.
Regenerate the generated job definitions, fix the helper definitions
and also fix the manually defined jobs (website-job).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Rewrite the function so that it's more compact and easier to
extend as new architectures, which will likely come with
multibus support right out the gate, are introduced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It belongs next to qemuDomainSupportsPCI().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way the function is currently written sort of obscures this
fact, but ultimately we already unconditionally assume PCI
support on most architectures.
Arm and RISC-V need some additional checks to maintain
compatibility with existing configurations but for all future
architectures, such as the upcoming LoongArch64, we expect PCI
support to come out of the box.
Last but not least, the functions is made const-correct.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's no longer used anywhere.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For all versions of QEMU that we support, the virt machine type
has a hard dependency on this device, so we can stop checking
whether the capability is present and just use it unconditionally.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For all supported QEMU version, the virt machine type has a hard
dependency on PCI support, so if we want to test virtio-balloon
together with virtio-mmio we have to either request that
explicitly or trick libvirt by masking capabilities. Do the
former instead of the latter.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop everything that's not directly related to the scenario
being tested.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of these are either a subset of other tests, or provide
coverage for scenarios that are not really possible: for all
versions of QEMU that we support, the virt machine type has a
hard dependency on the generic PCIe controller, which means
that we will never need to fall back to virtio-mmio.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though virtio-mmio is no longer the default on either
architecture, and likely nobody is using it at this point, we
still provide a way to opt into virtio-mmio usage and want to
keep existing guests working. Add explicit test suite coverage
for this scenario.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After commit 1d8454639f (libvirt 3.0.0), the default address
type for aarch64/virt guests is PCI. These tests are then
pointless, as they are just a subset of other tests, and the
comment attached to them inaccurate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The bus name for the default PHB is always "pci.0".
Fixes: 937f319536
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the same as the existing pseries-phb-simple, except that
each of the controllers is given a user alias. If we tried to
start the resulting guest, we'd get an error:
Bus 'ua-phb0' not found
This is because, at the QEMU command line level, the default PHB
is not represented and so it can't be given a custom alias. We're
going to address this issue in a follow-up commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to make sure that not only the controllers themselves
are added correctly, but also that devices attached to them
get assigned the expected bus value. In order to do that add
some devices, one per controller.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Re-parse and re-format the output XML to validate that the auto-added
bits and the formatter always agree. There's no way to specify an
alternative output file as a libvirt-formatted XML must be reformatted
identically.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XML parser for consoles sets the 'port=' attribute of '<target' to
be always the index of the console.
Thus when the "really crazy backcompat stuff for consoles" function
modifies the order of consoles by inserting the default one for a serial
port it must re-number the ports to ensure that the value will not
change on subsequent parse.
This luckily didn't cause any visible changes to the VM as the port
number isn't used for anything.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assigning a PCI address needs to also assign any extension addresses
right away. Otherwise they'd be assigned only after subsequent
format->parse cycle and thus be potentially missing on first run after
defining the VM and thus could change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'size' of a 'shmem' device is parsed and formatted as a "scaled"
value, stored in bytes, but the formatting scale is mebibytes. This
precission loss combined with the fact that the value was validated only
when starting and the size is formatted only when non-zero meant that
on first parse a value < 1 MiB would be accepted, but would be formatted
to the XML as 0 MiB as it was non-zero but truncated and a subsequent
parse would parse of such XML would parse it as 0 bytes, which in turn
would be interpreted as 'default' size.
Fix the issue by moving the validator, which ensures that the number is
a power of two and more than 1 MiB to the validator code so that it'll
be rejected at XML parsing time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to auto-adding of controllers, the assignment of indexes can
cause them to be considered in different ordering according to the logic
in 'virDomainControllerInsert' than they currently are.
To prevent changes in commandline between first run after defining a VM
xml and any subsequent run or restart of the daemon, we need to reorder
them when assigning the index.
The simplest method is to assign indexes and then create a new list of
controllers and re-instert them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainDefAddController' which is used in code-paths which auto-add
controllers to the definition such as 'virDomainDefMaybeAddController',
'virDomainDefAddUSBController', 'qemuDomainDefAddDefaultDevices' was
adding the controller at the end of the list. However that is not how
the XML parser would order the controller in the list as it uses
virDomainControllerInsert grouping them by type and additional
properties.
This would cause that auto-added controllers would re-order:
- between first and any subsequent run of the VM (even on commandline)
- after a libvirtd/virtqemud restart
- after any update of the definition based on the 'define' operation
(e.g. virsh edit)
To ensure that the ordering of controllers is identical always use
virDomainControllerInsert.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format the code the usual way despite having more than 80 columns so
that it's easier to read.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since this tests inactive/config XML files rename it accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't special-case qemuxml2argvtest's handling of timeout but rather
allow each test array entry to have it's own.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is an intermediate step to merge qemuxml2xmltest into this common
helper. This eliminates double setup/parsing of the input data as well
as will ensure that all input XMLs are tested both for ARGV as well as
XML output. For now we skip tests that don't have an output XML to show
that the this does everything that qemuxml2xmltest does.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Get clean separation between the parsing and argv conversion so that
it's obvious in the test output:
2409) QEMU XML def parse s390-async-teardown.s390x-6.0.0 ... libvirt: QEMU Driver error : unsupported configuration: asynchronous teardown is not available with this QEMU binary
OK
2410) QEMU XML def -> ARGV s390-async-teardown.s390x-6.0.0 ... SKIP
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the common setup and parsing of the input XML into a separate
helper testQemuConfXMLCommon(). The helper has semantics which will
allow us to call it from multiple places so that VIR_TEST_RANGE will
still work properly even when we'll add multiple steps reusing the
prepared data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the setup of the fake driver from testCompareXMLToArgv to 'mymain'.
With this we also won't need to reset the fake drivers which was done
only partially.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
