Currently this enum is defined in domain_conf.h and named
virDomainHostdevSubsysPCIDriverType. I want to use it in parts of the
network and networkport config, so am moving its definition to
device_conf.h which is / can be included by all interested parties,
and renaming it to match the name of the corresponding XML attribute
("driver name"). The name change (which includes enum values) does cause a
lot of churn, but it's all mechanical.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The exact same element can appear in <hostdev> and <interface
type='hostdev'>, and nearly identical in <network> and <networkport>
(these latter two don't include "xen" as a possible driver, but that's
coincidental - there's no reason Xen couldn't also use the VF pools in
virtual networks, it just doesn't).
This patch modifies all 4 to use the same <ref name="hostdevDriver"/>
so that it is simpler to add something new.
A side effect of this patch is that the grammar for the <interface>
element in domain XML has been tightened up a bit - previously it was
accepted by the schema (but nonsensical) to have virtio and network
interface options specified; as a part of making the two different
<driver> choices each a complete element (rather than each being a
collection of attributes and subelements) these extra
attributes/subelements that were irrelevant to the hostdev-type
<driver> were made to be valid only for an emulated interface's
<driver>.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Historically libvirt hasn't differentiated between the name of a
loadable kernel module, and the name of the device driver that module
implements, but these two names can be (and usually are) at least
subtly different.
For example, the loadable module called "vfio_pci" implements a PCI
driver called "vfio-pci". We have always used the name "vfio-pci" both
to load the module (with modprobe) and to check (in
/sys/bus/pci/drivers) if the driver is available. (This has happened
to work because modprobe "normalizes" all the names it is given by
replacing "-" with "_", so "vfio-pci" works for both loading the
module and checking for the driver.)
When we recently gained the ability to manually specify the driver for
"virsh nodedev-detach", the fragility of this system became apparent -
if a user gave the "driver name" as "vfio_pci", then we would modprobe
the module correctly, but then erroneously believe it hadn't been
loaded because /sys/bus/pci/drivers/vfio_pci didn't exist. For manual
specification of the driver name, we could deal with this by telling
the user "always use the correct name for the driver, don't assume
that it has the same name as the module", but it would still end up
confusing people, especially since some drivers do use underscore in
their name (e.g. the mlx5_vfio_pci driver/module).
This will only get worse when an upcoming patch starts automatically
determining the driver to use for VFIO-assigned devices - it will look
in the kernel's modules.alias file to find "best" VFIO variant
*module* for a device, and 3 out of 4 current examples of
vfio-pci/variant drivers have a mismatch between module name and
driver name, so the current code would end up properly loading the
module, but then erroneously think that the driver wasn't available.
This patch makes the code more forgiving by
1) checking for both $drivername and underscore($drivername) in
/sys/bus/pci/drivers
2) when we determine a module needs to be loaded, look at the link in
/sys/module/$modulename/driver/pci:$drivername to determine the
name of the driver we need to bind to the device(rather than just
assuming the driver has the same name as the module
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently we only append a newline to 'actual' if 'expected'
(as loaded from file) already ends in a newline, but that
results in inconsistent behavior.
For example, some of the test files used by virhostcputest are
newline-terminated and some aren't. If we were to remove
existing newlines from those files or add them where they
aren't present, the test would still pass, and even using
VIR_TEST_REGENERATE_OUTPUT=1 wouldn't change them back.
Make things consistent by ensuring that 'actual' is always
newline-terminated. The only exception is when 'actual' is
completely empty: in that case, we want the file to be actually
empty, not contain a single empty line. query-jobs-empty.result
in qemumonitorjsondata/ is an example of this being used.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test still passes after deleting them, which seems to
indicate that they're unnecessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
rhel-8 lacks 'pidfd_open()' support and thus nbdkit can't be enabled
there.
mingw builds explicitly disable nbdkit support, but use
'--auto-features=enabled' thus omitting setting of
'nbdkit_config_default' results in meson thinking we want to enable it:
../meson.build:1018:2: ERROR: Problem encountered: nbdkit_config_default requires nbdkit to be enabled
Disable it explicitly. The meson logic might need to be fixed eventually
when switching it on by default.
Fixes: 9eabf14afb
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
To prevent regressions when refactoring tests and accidentally forgotten
input files make sure that qemuxml2argvtest is invoked for all input
files in tests/qemuxml2argvdata
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than completely compiling out the tests mark them as skipped.
This will allow us to add a checker that all input files are accounted
for.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the rest of test cases which were tested only by qemuxml2xmltest.
All test cases added here have a '<interface type="network"' which needs
to be translated using the new fake network driver.
Note that this captures the status quo of the tests. No care was given
whether the tests make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add versions stripping vlans and bandwidth setup so that they can be
used in qemuxml2argvtest for interfaces which don't support the above.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the data from 'nat-network' network definition to enable the test
case also for xml2argvtest.
Since the network listen bit doesn't need any plug definition just use
an empty string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to be able to use '<interface type="network"' we need a fake
network driver in qemuxml2argvtest. Create one by simply allowing users
to reuse configs from tests/networkxml2xmlin and tests/virnetworkportxml2xmldata
which will be returned to corresponding functions.
The driver implements:
.networkLookupByName = fakeNetworkLookupByName,
- validate syntax of network name, check if config exists
.networkGetXMLDesc = fakeNetworkGetXMLDesc,
- return appropriate XML
.networkPortCreateXML = fakeNetworkPortCreateXML,
- validate that port XML exists
.networkPortGetXMLDesc = fakeNetworkPortGetXMLDesc,
- return appropriate port XML
With the above and the correspondign test data, all network XMLs can be
enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately the network backend commandline formatter attempts to also
setup the backend itself, which it really should not.
For now make sure qemuxml2argvtest can call virNetDevSetMTU.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate the SLIRP bits from 'qemuProcessNetworkPrepareDevices' and do
the setup of the internal data when setting up domain data.
This will allow tests to use the same code path to lookup data for a
network.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Everything this XML tests is already explicitly covered in other tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modify the test case so that it can be used also for qemuxml2argvtest
by removing invalid configuration (interface type='user' + queues),
clean up unneeded disks and rename it accordingly. Also test the
ioeventfd.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Test both linkstates in an explicit test case. Note that link state is
setup via monitor, thus not visible on the commandline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The tested configuration is not valid for a qemu VM. Move it to the
generic test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There were plenty of test cases invoked only from qemuxml2xmltest but
not from qemuxml2argvtest, either by accident or it was deemed unneeded.
Bulk-add all test cases which fit the above description which don't
require faking the network driver. Use same invocation as present in
qemuxml2xmltest.
Arguably in certain cases we could move the test case to
genericxml2xmltest, but this covers the cases when that would not be
appropriate.
Tests requiring the network driver will be bulk-added when the fake
network driver will be implemented.
This patch also allows the use of FLAG_SKIP_CONFIG_ACTIVE in
qemuxml2argvtest although the flag will be dormant for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prepare for test cases which would want to call that function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prevent duplicated invocation of tests by tracking use of output files.
Some cases need to be exempt from this for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'parallel-tcp-chardev', 'parallel-parport-chardev' are invoked twice
with exactly the same parameters, remove the duplicity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver explicitly rejects such configuration, thus this is just
a generic XML2XML test case. Move it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The case was removed in commit 8ff73d22c7
which modernized the cases without an explicit reason. Reinstate it.
Fixes: 8ff73d22c7
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test case was introduced by commit 68599168ea
but is only used in the qemunbdkittest. Fix it and make use of it also
in qemuxml2argvtest.
Fixes: 68599168ea
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The tests invocations were accidentaly removed in commit
54257ed51b
Fixes: 54257ed51b
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently when we build with nbdkit support, libvirt will always try to
use nbdkit to access remote disk sources when it is available. But
without an up-to-date selinux policy allowing this, it will fail.
because the required selinux policies are not yet widely available, we
have disabled nbdkit support on rpm builds for all distributions before
Fedora 40.
Unfortunately, this makes it more difficult to test nbdkit support.
After someone updates to the necessary selinux policies, they would also
need to rebuild libvirt to enable nbdkit support. By introducing a
configure option (nbdkit_config_default), we can build packages with
nbdkit support but have it disabled by default.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
udevGetStringSysfsAttr() return value is invariant, so change it
type and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
udevTranslatePCIIds() return value is invariant, so change it
type and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virProcessGetNamespaces() return value is invariant, so change it
type and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainNetUpdate() return value is invariant, so change it type
and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virLXCControllerAddConsole() return value is invariant, so change
it type and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virNetServerAddService() return value is invariant, so change it
type and remove all dependent checks.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virCPUx86DataAddItem() return value is invariant, so change it
type and remove all dependent checks.
Functions changed to void:
virCPUx86DataAddItem()
x86DataAdd()
virCPUx86DataAdd()
x86DataAddSignature()
virCPUx86DataSetSignature()
libxlCapsAddCPUID()
cpuidSetLeaf4()
cpuidSetLeaf7()
cpuidSetLeafB()
cpuidSetLeafD()
cpuidSetLeafResID()
cpuidSetLeaf12()
cpuidSetLeaf14()
cpuidSetLeaf17()
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, libvirt creates a thread pool with only on thread to handle all
qemu monitor events for virtual machines, In the cases that if the thread
gets stuck while handling a monitor EOF event, such as unable to kill the
virtual machine process or release resources, the events of other virtual
machine will be also blocked, which will lead to the abnormal behavior of
other virtual machines.
For instance, when another virtual machine completes a shutdown operation
and the monitor EOF event has been queued but remains unprocessed, we
immediately destroy and start the virtual machine again, at a later time
when EOF event get processed, the processMonitorEOFEvent() will kill the
virtual machine that just started.
To address this issue, in the processMonitorEOFEvent(), we check whether
the current virtual machine's id is equal to the the one at the time
the event was generated. If they do not match, we immediately return.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Signed-off-by: dengpengcheng <dengpc12@chinatelecom.cn>
New Alpine and Fedora releases were added to libvirt-ci (3.19 and
39, respectively) and old ones were removed. Update the manifest
file and regenerate the rest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently, Fedora 37 and 38 is used. The former is now EOL since
there's new release. Switch 37 to 39 then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Prior to v9.3.0-rc1~30 we used to set default bus for <input/>
devices, during XML parsing. In the commit this code was moved to
a post parse callback. But somehow the line that sets the bus in
one specific case disappeared. Bring it back.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/577
Fixes: c4bc4d3b82
Signed-off-by: Jonathan Wright <jonathan@almalinux.org>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By adding a link to an explanation in the kbase.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
QEMU 8.2 was released, update the x86_64 data for a final time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
FreeBSD 12.0 is no longer supported since 14.0 is out. Change the
CI manifest and refresh the rest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Multiplication results in integer overflow.
Thus, replace it with ULLONG_MAX and change
def->opts.pciopts.pcihole64size type to ULL.
Update variable usage according to new type.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Egor Makrushin <emakrushin@astralinux.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As of commit b2d079c113 which converted this function to use g_strdup,
the error label is only reached when i = 0, rendering it useless.
Remove it.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/572
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
