Pvpanic device supports bit 1 as crashloaded event, it means that
guest actually panicked and run kexec to handle error by guest side.
Handle crashloaded as a lifecyle event in libvirt.
Test case:
Guest side:
before testing, we need make sure kdump is enabled,
1, build new pvpanic driver (with commit from upstream
e0b9a42735f2672ca2764cfbea6e55a81098d5ba
191941692a3d1b6a9614502b279be062926b70f5)
2, insmod new kmod
3, enable crash_kexec_post_notifiers,
# echo 1 > /sys/module/kernel/parameters/crash_kexec_post_notifiers
4, trigger kernel panic
# echo 1 > /proc/sys/kernel/sysrq
# echo c > /proc/sysrq-trigger
Host side:
1, build new qemu with pvpanic patches (with commit from upstream
600d7b47e8f5085919fd1d1157f25950ea8dbc11
7dc58deea79a343ac3adc5cadb97215086054c86)
2, build libvirt with this patch
3, handle lifecycle event and trigger guest side panic
# virsh event stretch --event lifecycle
event 'lifecycle' for domain stretch: Crashed Crashloaded
events received: 1
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Starting a KVM domain on s390 with old machine type (such as
s390-ccw-virtio-2.5) and without any guest CPU model configured fails
with
CPU models are not available: KVM doesn't support CPU models
QEMU error. This is cause by libvirt using host-model CPU as the default
CPU based on QEMU reporting "host" CPU model as being the default one
(see commit v5.9.0-402-g24d8202294: qemu: Use host-model CPU on s390 by
default). However, even though both QEMU and KVM support CPU models on
s390 and QEMU can give us the host-model CPU, we can't use it with old
machine types which only support -cpu host.
https://bugzilla.redhat.com/show_bug.cgi?id=1795651
Reported-by: Christian Ehrhardt <paelzer@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The usability of a specific CPU mode may depend on machine type, let's
prepare for this by passing it to virQEMUCapsIsCPUModeSupported.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extend QEMU with tpm-spapr support. Assign a device address to the
vTPM device model.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Extend the QEMU capabilties with tpm-spapr support.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for the tpm-spapr device model for ppc64. The XML for
this type of TPM looks as follows:
<tpm model='tpm-spapr'>
<backend type='emulator'/>
</tpm>
Extend the documentation.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Introduce VIR_DOMAIN_TPM_MODEL_DEFAULT as a default model which we use
in case the user does not provide a model in the device XML. It has
the TIS's previous value of '0'. In the post parsing function
we change this default value to 'TIS' to have the same model as before.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
All our supported Linux distros now have this header.
It has never existed on FreeBSD / macOS / Mingw.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most code now uses the virProcess / virCommand APIs, so
the need for sys/wait.h is quite limited. Removing this
include removes the dependency on GNULIB providing a
dummy sys/wait.h for Windows.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use qemuBlockBitmapsHandleBlockcopy to calculate bitmaps to copy over
for a block-copy job.
We copy them when pivoting to the new image as at that point we are
certain that we don't dirty any bitmap unnecessarily.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a function calculating which bitmaps to copy to the mirror during
a block-copy operation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a validator which checks that a bitmap spanning multiple backing
chain members doesn't look broken. The current rules are that no
intermediate birmaps are missing (unfortunately it's hard to know
whether the topmost or bottommost bitmap is missing) and none of the
components is inconsistent.
We can obviously improve it over time.
The validator is also tested against the existing bitmap data we have
for the backup merging test as well as some of the existing broken
bitmap synthetic test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flags may control important aspects of the block job which may
influence also the termination of the job. Store the 'flags' for all
the block job types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a variable which will store the contents of the 'flags' variable as
passed in by the individual block jobs. Since the flags may influence
behaviour of the jobs it's important to preserve them to the
finalization steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the glib allocation function that never returns NULL and remove the
now dead-code checks from all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Create a wrapper for qemuBlockGetNamedNodeData named
qemuBlockGetNamedNodeData. The purpose of the wrapper is to integrate
the monitor handling functionality and in the future possible
qemuCaps-based flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow qemu access to modify backing files in case when we want to delete
a checkpoint.
This patch adds tracking of which images need to be relabelled when
calculating the transaction, the code to relabel them and rollback.
To verify that stuff works we also output the list of images to relabel
into the test case output files in qemublocktest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow deleting of checkpoints when snapshots were created along. The
code tracks and modifies the checkpoint list so that backups can still
be taken with such a backing chain. This unfortunately requires to
rename few bitmaps (by copying and deleting them) in some cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This requires stealing one cmd pointer before returning it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Mark eligible declarations as g_autofree and remove
the corresponding VIR_FREE calls.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Always trim the full specified suffix.
All of the callers outside of tests were passing either
strlen or the actual length of the string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now, that every use of virAtomic was replaced with its g_atomic
equivalent, let's remove the module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The rewrite to use GLib's atomic ops functions changed the behavior
of virAtomicIntInc - before it returned the pre-increment value.
Most of the callers using its value were adjusted, but the one
in qemuDriverAllocateID was not. If libvirtd would reconnect to
a running domain during startup, the next started domain would get
the same ID:
$ virsh list
Id Name State
--------------------------
1 f28live running
1 f28live1 running
Use the g_atomic_add function directly (as recommended in viratomic.h)
and add 1 to the result.
This also restores the usual numbering from 1 instead of 0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 7b9645a7d1
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Starting on commit 1f43393283, qemuDomainFillDeviceIsolationGroup()
returns 0 in all circunstances. Let's turn it to 'void' make it
clearer that the function will not fail. This also spares a
check for < 0 return in qemu_hotplug.c. The
qemuDomainFillDeviceIsolationGroupIter() callback now returns
0 at all times - which is already happening anyway.
Refer to 1f43393283 commit message for more details on why
the function was changed to never return an error.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainChrDefDropDefaultPath() returns an int, but it's
always returning 0. Callers are checking for result < 0 to
run their cleanup code needlessly.
Turn the function to 'void' and adjust the callers.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Avoid some of the virObjectUnref() calls by using g_autoptr.
Aside from the 'cleanup' label in qemuDomainSetFakeReboot(),
all other now deprecated cleanup labels will be removed in
the next patch.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree to remove VIR_FREE() calls used for cleanups.
Labels that became deprecated will be removed in a later
patch.
In qemuDomainSetupDisk(), the 'dst' variable is not used at
all and could be removed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'caps' variable in qemuDomainObjPrivateXMLParseAutomaticPlacement()
is set to auto clean via g_autoptr(), but a 'virObjectUnref(caps)' is
being executed in the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With -blockdev we must look up via the nodename rather than the 'drive'
alias which is not present any more.
This fixes the pre-creation of storage volumes on migration with
non-shared storage.
https://bugzilla.redhat.com/show_bug.cgi?id=1793263
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Swithc to the helper which doesn't require checking of the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The data is gathered only once so we can move the whole block which
fetches the data out of the loop and get rid of the logic which
prevents multiple calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor the logic to skip the body of the function if there's nothing
to do.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two calls to virHashNew which check the return value. It's not
necessary any more as virHashNew always returns a valid pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Aside from itinerant error (actually warning) messages due to an
unrecognized response from qemu, this isn't even necessary - the
migration proceeds successfully to completion anyway.
(I'm not sure where to see this status reported in the API though - do
we need to add an extra state, or recognition of a new event somewhere?)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Normally a PCI hostdev can't be migrated, so
qemuMigrationSrcIsAllowedHostdev() won't permit it. In the case of a a
hostdev network interface that has <teaming type='transient'/> set,
QEMU will automatically unplug the device prior to migration, and
re-plug a corresponding device on the destination. This patch modifies
qemuMigrationSrcIsAllowedHostdev() to allow domains with those devices
to be migrated.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Presence of the virtio-net-pci option called "failover" indicates
support in a qemu binary of a simplistic bonding of a virtio-net
device with another PCI device. This feature allows migration of
guests that have a network device assigned to a guest with VFIO, by
creating a network bond device in the guest consisting of the
VFIO-assigned device and a virtio-net-pci device, then temporarily
(and automatically) unplugging the VFIO net device prior to migration
(and hotplugging an equivalent device on the migration
destination). (The feature is called "failover" because the bond
device uses the vfio-pci netdev for normal guest networking, but
"fails over" to the virtio-net-pci netdev once the vfio-pci device is
unplugged for migration.)
Full functioning of the feature also requires support in the
virtio-net driver in the guest OS (since that is where the bond device
resides), but if the "failover" commandline option is present for the
virtio-net-pci device in qemu, at least the qemu part of the feature
is available, and libvirt can add the proper options to both the
virtio-net-pci and vfio-pci device commandlines to indicate qemu
should attempt doing the failover during migration.
This patch just adds the qemu capabilities flag "virtio-net.failover".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are a large number of different header files that
are related to the sockets APIs. The virsocket.h header
includes all of the relevant headers for Windows and UNIX
in one convenient place. If virsocketaddr.h is already
included, then there's no need for virsocket.h
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a simplified variant of gnulib's passfd module
without the portability code that we do not require.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently when disk is removed from iotune group (by setting
all tunables to zero) group name is leaved in config. Let's fix
it.
Given iotune defaults are taken from the destination group setting
tunables to zero may require different set of zero settings in API
call. Let's prohibit removing from group while specifying different
group name then current for the sanity sake.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For example if disk is not in the group and we want to move it
there then it makes sense to specify only the group name in API call.
Currently the destination group iotune settings will be overwritten
with the disk settings which I would say is not what one would expect.
Thus let's get defaults from the group we are moving to.
And if we are moving the brand new group then is makes sense to
copy the current disk iotune settings to the group.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainSetBlockIoTune not simply sets the iotune params given in API
but use current settings for all the omitted params. Unfortunately
it uses current settings for active config when setting inactive
params. Let's fix it.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently it is possible to start a domain which have disks
in same iotune group and at the same time having different iotune
params. Both params set are passed to qemu in command line and the one
that is passed later down command line is get actually set.
Let's prohibit such configurations.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently upon successfull call to qemu's implementation of
virDomainSetBlockIoTune iotune settings are changed only for the
disk given in API if the disk is in iotune group while we need
to change the settings for all disks in the group.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
And introduce virDomainBlockIoTuneInfoHasAny.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All the callees return either 0 or -1 so there is no need
for propagating the value. And we bail on the first error.
Remove the variable to make the function simpler.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have a helper variable to make the code more concise,
use it consistently.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that the cleanup section is empty, eliminate the cleanup
label as well as the 'ret' variable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use the g_auto macros wherever possible to eliminate the cleanup
section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The template still references libvirt-qemu-shim, which was at one
point the name used to refer to what we now know as virt-qemu-run.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
A recent commit added an error check for too-nested backing chains
followed by a return, even though errors above jump to cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: b168fa88b8
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Remove bogus G_GNUC_UNUSED attribute and add a missing space.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: d600667278
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The algorithm is used in two places to find the parent checkpoint object
which contains given disk and then uses data from the disk. Additionally
the code is written in a very non-obvious way. Factor out the lookup of
the disk into a function which also simplifies the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The function has no users now and there's no need for it as the common
pattern is to look up the whole disk object anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a disk is unplugged and then the user tries to delete a checkpoint
the code would try to use NULL node name as it was not checked.
Fix this by fetching the whole disk definition object and verifying it
was found.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Lookup the whole disk definition rather than just the node name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Upcoming patches will also use the domain disk definition. Rename disk
to chkdisk for clarity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Upcoming patches will also use the domain disk definition. Rename disk
to chkdisk for clarity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuCheckpointDiscard is a massive function that can be separated into
smaller bits. Extract the part that actually modifies the disk from the
metadata handling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test code will need to know whether the virQEMUCaps object contains any
machine types already. Add a helper and expose it via 'qemu_capspriv.h'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous approac of just purging the alias combined with the fact
that we filled in fake machine types in the test data meant that if a
test case used an alias machine type such as 'pc' or 'q35' it would not
properly resolve to the actual data returned by qemu.
This started to be a problem since the CPU driver now looks at the
default CPU reported with the machine type.
This patch replaces the original approach of just removing the alias by
replacing it with a copy of the machine type data which the type would
alias to. This means that we are using the real data while we don't
modify the test output after every qemu upgrade.
Additionally this change will allow us to drop adding the fake machine
types later.
The test fallout is from actually excercising the CPU driver with
actual data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate out the internals as they will become more complex soon.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Every supported qemu is able to return the list of machine types it
supports so we can start validating it against that list. The advantage
is a better error message, and the change will also prevent having stale
test data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Debian/Ubuntu linkers are more strict that other distros requiring glib
to be linked explicitly.
macOS needs -export-dynamic instead of -Wl,--export-dynamic
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Similarly to 510d154a0b we need to prevent
doing too deeply nested backing chains and reject them with a sane error
message.
Add a loop to go through the snapshots prior to attempting actually
creating them to prevent some possible inconsistent scenarios.
We don't need to do it when reusing backing chains as we'll be
re-detecting the backing chain in that case anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Don't adopt the backing store data when reusing images provided by the
user. This will force a backing chain re-probe as users might have
passed in something unexpected in the overlay where our view of the
backing chain would not correspond.
This is done only for inactive snapshots as there we have way less
verification.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The previous "QEMU shim" proof of concept was taking an approach of only
caring about initial spawning of the QEMU process. It was then
registered with the libvirtd daemon who took over management of it. The
intent was that later libvirtd would be refactored so that the shim
retained control over the QEMU monitor and libvirt just forwarded APIs
to each shim as needed. This forwarding of APIs would require quite alot
of significant refactoring of libvirtd to achieve.
This impl thus takes a quite different approach, explicitly deciding to
keep the VMs completely separate from those seen & managed by libvirtd.
Instead it uses the new "qemu:///embed" URI scheme to embed the entire
QEMU driver in the shim, running with a custom root directory.
Once the driver is initialization, the shim starts a VM and then waits
to shutdown automatically when QEMU shuts down, or should kill QEMU if
it is terminated itself. This ought to use the AUTO_DESTROY feature but
that is not yet available in embedded mode, so we rely on installing a
few signal handlers to gracefully kill QEMU. This isn't reliable if
we crash of course, but you can restart with the same root dir.
Note this program does not expose any way to manage the QEMU process,
since there's no RPC interface enabled. It merely starts the VM and
cleans up when the guest shuts down at the end. This program is
installed to /usr/bin/virt-qemu-run enabling direct use by end users.
Most use cases will probably want to integrate the concept directly
into their respective application codebases. This standalone binary
serves as a nice demo though, and also provides a way to measure
performance of the startup process quite simply.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This enables support for running QEMU embedded to the calling
application process using a URI:
qemu:///embed?root=/some/path
Note that it is important to keep the path reasonably short to
avoid risk of hitting the limit on UNIX socket path names
which is 108 characters.
When using the embedded mode with a root=/var/tmp/embed, the
driver will use the following paths:
logDir: /var/tmp/embed/log/qemu
swtpmLogDir: /var/tmp/embed/log/swtpm
configBaseDir: /var/tmp/embed/etc/qemu
stateDir: /var/tmp/embed/run/qemu
swtpmStateDir: /var/tmp/embed/run/swtpm
cacheDir: /var/tmp/embed/cache/qemu
libDir: /var/tmp/embed/lib/qemu
swtpmStorageDir: /var/tmp/embed/lib/swtpm
defaultTLSx509certdir: /var/tmp/embed/etc/pki/qemu
These are identical whether the embedded driver is privileged
or unprivileged.
This compares with the system instance which uses
logDir: /var/log/libvirt/qemu
swtpmLogDir: /var/log/swtpm/libvirt/qemu
configBaseDir: /etc/libvirt/qemu
stateDir: /run/libvirt/qemu
swtpmStateDir: /run/libvirt/qemu/swtpm
cacheDir: /var/cache/libvirt/qemu
libDir: /var/lib/libvirt/qemu
swtpmStorageDir: /var/lib/libvirt/swtpm
defaultTLSx509certdir: /etc/pki/qemu
At this time all features present in the QEMU driver are available when
running in embedded mode, availability matching whether the embedded
driver is privileged or unprivileged.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The intent here is to allow the virt drivers to be run directly embedded
in an arbitrary process without interfering with libvirtd. To achieve
this they need to store all their configuration & state in a separate
directory tree from the main system or session libvirtd instances.
This can be useful for doing testing of the virt drivers in "make check"
without interfering with the user's own libvirtd instances.
It can also be used for applications using KVM/QEMU as a piece of
infrastructure to build an service, rather than for general purpose
OS hosting. A long standing example is libguestfs, which would prefer
if its temporary VMs did show up in the main libvirtd VM list, because
this confuses apps such as OpenStack Nova. A more recent example would
be Kata which is using KVM as a technology to build containers.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a domain is configured to have an egl-headless display and a virtio
video device, virgl will be enabled automatically within the guest, even
if the video device is configured with accel3d='no'.
In this case we should explicitly pass 'virgl=off' to qemu.
See https://bugzilla.redhat.com/show_bug.cgi?id=1791236 for more
information.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since v4.2-rc0, QEMU introduced a builtin rng backend that uses
getrandom() syscall to generate random. Add it to libvirt with the
backend model 'builtin'.
https://bugzilla.redhat.com/show_bug.cgi?id=1785091
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'builtin' rng backend model can be used as following:
<rng model='virtio'>
<backend model='builtin'/>
</rng>
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is used to check if qemu is capable of rng-builtin object.
This object is added since qemu-4.2.0-rc0, commit 6c4e9d48.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since v5.6.0-48-g270583ed98 we try to cache domain capabilities,
i.e. store filled virDomainCaps in a hash table in virQEMUCaps
for future use. However, there's a race condition in the way it's
implemented. We use virQEMUCapsGetDomainCapsCache() to obtain the
pointer to the hash table, then we search the hash table for
cached data and if none is found the domcaps is constructed and
put into the table. Problem is that this is all done without any
locking, so if there are two threads trying to do the same, one
will succeed and the other will fail inserting the data into the
table.
Also, the API looks a bit fishy - obtaining pointer to the hash
table is dangerous.
The solution is to use a mutex that guards the whole operation
with the hash table. Then, the API can be changes to return
virDomainCapsPtr directly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1791790
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When fixing [1] I've ran attached reproducer and had it spawn
1024 threads and query capabilities XML in each one of them. This
lead libvirtd to hit the RLIMIT_NOFILE limit which was kind of
expected. What wasn't expected was a subsequent segfault. It
happened because virCPUProbeHost failed and returned NULL. We've
taken the NULL and passed it to virCapabilitiesHostNUMARef()
which dereferenced it. Code inspection showed the same flas in
virQEMUDriverGetHostNUMACaps(), so I'm fixing both places.
1: https://bugzilla.redhat.com/show_bug.cgi?id=1791790
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Don't use ERANGE as it doesn't make much sense in the error message.
Also point out that the reply from qemu was too large which is not
obvious from the original error:
error: No complete monitor response found in 10485760 bytes: Numerical result out of range
The new message will read:
error: internal error: QEMU monitor reply exceeds buffer size (10485760 bytes)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
libvirt treats 'luks' images as raw+encryption. The logic in
qemuBlockStorageSourceCreateFormat skipped the creation if the requested
image was raw but didn't take into account the encryption.
This manifested itself e.g. when attempting to do a virsh blockcopy with
the following XML:
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/tmp/enccpy'>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f'/>
</encryption>
</source>
</disk>
Where qemu would report the following error:
unable to execute QEMU command 'blockdev-add': Volume is not in LUKS format
rather than actually formatting the image first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use the user-configured name of the bitmap when merging the appropriate
bitmaps for an incremental backup so that the user can see it as
configured. Additionally expose the default bitmap name if nothing is
configured.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Pass the exportname as configured when exporting the image via NBD and
fill it with the default if it's not configured.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When using blockdev configurations the 'device' argument of
'blockdev-commit' must correspond to the topmost node in the block node
graph. Libvirt didn't do this properly in case when 'copy_on_read'
option was enabled on the disk.
Use qemuDomainDiskGetTopNodename to fix it when calling block-commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When using blockdev configurations the 'device' argument of
'blockdev-mirror' must correspond to the topmost node in the block node
graph. Libvirt didn't do this properly in case when 'copy_on_read'
option was enabled on the disk.
Use qemuDomainDiskGetTopNodename to fix it for the blockdev-mirror calls
in qemuDomainBlockCopy and the non-shared-storage migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are more places which require getting the topmost nodename to be
passed to qemu. Separate it out into a new function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a mirror job fails to start in -blockdev mode we'd not unplug the
backing files we added first because the code on the error path checked
the wrong value. 'rc' is used as status of the code which added the
images, but the state of the 'block(dev)-mirror' call is stored in 'ret'
at that point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The virConnectGetDomainCapabilities API accepts either a binary path
to the emulator, or desired guest arch. If guest arch is not given,
then the host arch is assumed.
In the case where the binary is not given, the code tried to find the
emulator binary in the existing list of cached emulator capabilities.
This is not valid since we switched to lazy population of the cache in:
commit 3dd91af01f
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Dec 2 13:04:26 2019 +0000
qemu: stop creating capabilities at driver startup
As a result of this change, if there are no persistent guests defined
using the requested guest architecture, virConnectGetDomainCapabilities
will fail to find an emulator binary.
The solution is to stop relying on the cached capabilities to find the
binary and instead use the same logic we use to pick default a binary
per arch when populating capabilities.
Tested-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The "ps2" bus is only available on certain machines like x86. On
machines like s390x, we should refuse to add a device to this bus
instead of silently ignoring it.
Looking at the QEMU sources, PS/2 is only available if the QEMU binary
has the "i8042" device, so let's check for that and only allow "ps2"
devices if this QEMU device is available, or if we're on x86 anyway
(so we don't have to fake the QEMU_CAPS_DEVICE_I8042 capability in
all the tests that use <input ... bus='ps2'/> in their xml data).
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1763191
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU driver has two functions: qemuGetDHCPInterfaces() and
qemuARPGetInterfaces() that are being used inside only one single
function. They can be turned into generic functions that other drivers
can use. This commit move both from QEMU driver tree to domain conf
tree.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function virSecretGetSecretString calls into secret driver and is
used from other hypervisors drivers and as such makes more sense in
util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.
There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is
https://gitlab.gnome.org/GNOME/glib/issues/1999
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirt's original atomic ops impls were largely copied
from GLib's code at the time. The only API difference
was that libvirt's virAtomicIntInc() would return a
value, but g_atomic_int_inc was void. We thus use
g_atomic_int_add(v, 1) instead, though this means
virAtomicIntInc() now returns the original value,
instead of the new value.
This rewrites libvirt's impl in terms of g_atomic_int*
as a short term conversion. The key motivation was to
quickly eliminate use of GNULIB's verify_expr() macro
which is not a direct match for G_STATIC_ASSERT_EXPR.
Long term all the callers should be updated to use
g_atomic_int* directly.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Switch from old VIR_ allocation APIs to glib equivalents.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function potentially grabs both a monitor job and an agent job at
the same time. This is problematic because it means that a malicious (or
just buggy) guest agent can cause a denial of service on the host. The
presence of this function makes it easy to do the wrong thing and hold
both jobs at the same time. All existing uses have already been removed
by previous commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to avoid holding an agent job and a normal job at the same
time, we want to avoid accessing the domain's definition while holding
the agent job. To achieve this, qemuAgentGetFSInfo() only returns the
raw information from the agent query to the caller. The caller can then
release the agent job and then proceed to look up the disk alias from
the vm definition. This necessitates moving a few helper functions to
qemu_driver.c and exposing the agent data structure (qemuAgentFSInfo) in
the header.
In addition, because the agent function no longer returns the looked-up
disk alias, we can't test the alias within qemuagenttest. Instead we
simply test that we parse and return the raw agent data correctly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemuAgentDiskInfo structure is filled with information received from
the agent command response, except for the 'alias' field, which is
retrieved from the vm definition. Limit this structure only to data that
was received from the agent message.
This is another intermediate step in moving the responsibility for
searching the vmdef from qemu_agent.c to qemu_driver.c so that we can
avoid holding an agent job and a normal job at the same time.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In an effort to avoid holding both an agent and normal job at the same
time, we shouldn't access the vm definition from within qemu_agent.c
(i.e. while the agent job is being held). In preparation, we need to
store the full filesystem disk information in qemuAgentDiskInfo. In a
following commit, we can pass this information back to the caller and
the caller can search the vm definition to match the filsystem disk to
an alias.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function name doesn't give a good idea of what the function does.
Rename to qemuAgentGetFSInfoFillDisks() to make it more obvious than it
is filling in the disk information in the fsinfo struct.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU since 4.1.0 supports the "dies" parameter for -smp
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Recently CPU hardware vendors have started to support a new structure
inside the CPU package topology known as a "die". Thus the hierarchy
is now:
sockets > dies > cores > threads
This adds support for "dies" in the XML parser, with the value
defaulting to 1 if not specified for backwards compatibility.
For example a system with 64 logical CPUs might report
<topology sockets="4" dies="2" cores="4" threads="2"/>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When pause-before-switchover QEMU capability is enabled, we get STOP
event before MIGRATION event with postcopy-active state. To properly
handle post-copy migration and emit correct events commit
v4.10.0-rc1-4-geca9d21e6c added a hack to
qemuProcessHandleMigrationStatus which translates the paused state
reason to VIR_DOMAIN_PAUSED_POSTCOPY and emits
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY event when migration state changes
to post-copy.
However, the code was effective on both sides of migration resulting in
a confusing VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY event on the destination
host, where entering post-copy mode is already properly advertised by
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event.
https://bugzilla.redhat.com/show_bug.cgi?id=1791458
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When resuming a domain from a save file, we read the domain XML
from the file, add it onto our internal list of domains, start
the qemu process, let it load the incoming migration stream and
resume its vCPUs afterwards. If anything goes wrong, the domain
object is removed from the list of domains and error is returned
to the caller. However, the qemu process might be left behind -
if resuming vCPUs fails (e.g. because qemu is unable to acquire
write lock on a disk) then due to a bug the qemu process is not
killed but the domain object is removed from the list.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1718707
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We have to keep the default - querying the agent if no flag is
set.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
libvirt currently always reports that USB is available as a bus subsystem
type when running "virsh domcapabilities". However, this is not always
true, for example the qemu-system-s390x binary normally never has support
for USB. Thus we should only report that USB is available if there is
also a USB host controller available where we can attach USB devices.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1759849
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically there are two places where we format authentication and
encryption for a disk. The logich which formats it for backing files was
flawed though and didn't format it at all. This worked if the image
became a backing file through the means of a snapshot but not directly.
Force formatting of the source and encryption for any non-disk case to
fix the issue.
This caused problems in many places as we use the formatter to copy the
definition. Effectively any copy lost the secret definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1789310https://bugzilla.redhat.com/show_bug.cgi?id=1788898
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Internal snapshots of a non-running domain do not carry any memory state
and restoring such a snapshot will not replace existing saved memory
state. This allows a scenario, where a user first suspends a domain into
managedsave, restores a non-running snapshot and then resumes the domain
from managedsave. After that, the guest system will run with its
previous memory state atop a different disk state. The most obvious
possible fallout from this is extensive file system corruption. Swap
content and RAID bitmaps might also be off.
This has been discussed[1] and fixed[2] from the end-user perspective for
virt-manager.
This patch marks the restore operation as risky at the libvirt level,
requiring the user to remove the saved memory state first or force the
operation.
[1] https://www.redhat.com/archives/virt-tools-list/2019-November/msg00011.html
[2] https://www.redhat.com/archives/virt-tools-list/2019-December/msg00049.html
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit v5.10.0-290-g3a4787a301 refactored qemuDomainGetHostdevPath to
return a single path rather than an array of paths. When the function is
called on a missing device, it will now return NULL in @path rather than
a NULL array with zero items and the callers need to be adapted
properly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
src/qemu/qemu_domain_address.c:680:13: error: this statement may fall through [-Werror=implicit-fallthrough=]
switch ((virDomainFSModel) dev->data.fs->model) {
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: f363af7e35
The point of this function is to translate virDomainOsDefFirmware
enum to qemuFirmwareOSInterface enum. However, with my commit
v5.10.0-507-g8e1804f9f6 we are passing a variable type of
virDomainLoader enum. Make the function accept both enums and
make the enum members correspond to each other.
This fixes clang build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split the formatting by fsdriver type to allow adding a new type.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Split the switch by fsdriver type to allow adding a new one.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Wire up the allocation and disposal of private data.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the 'gluster' part and decouple the return from
the gluster_debug_level parsing to allow adding more options
to this section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Inactive VM doesn't have qemuCaps set thus we'd never properly report
that VM backups are supported only for running VMs.
Move the capability check after the active check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
While we discourage people to use the old style of specifying
UEFI for their domains (the old style is putting path to the FW
image under /domain/os/loader/ whilst the new one is using
/domain/os/@firmware), some applications might have not adapted
yet. They still rely on libvirt autofilling NVRAM path and
figuring out NVRAM template when using the old way (notably
virt-install does this). We must preserve backcompat for this
previously supported config approach. However, since we really
want distro maintainers to leave --with-loader-nvram configure
option and rely on JSON descriptors, we need to implement
autofilling of NVRAM template for the old way too.
Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=1782778
RHEL: https://bugzilla.redhat.com/show_bug.cgi?id=1776949
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These functions are meant to replace verbose check for the old
style of specifying UEFI with a simple function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This simplifies condition when matching FW interface by having a
single line condition instead of multiline one. Also, it prepares
the code for future expansion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function needs domain definition really, we don't need to
pass the whole domain object. This saves couple of dereferences
and characters esp. in more checks to come.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We insert the checkpoint metadata into the list of checkpoints prior to
actually creating the on-disk bits. If the 'transaction' or any other
steps done between inserting the checkpoint and creating the on-disk
data fail we'd end up with an unusable checkpoint that would vanish
after libvirtd restart.
Prevent this by rolling back the metadata if we didn't actually take and
record the checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we are certain that the checkpoint creation failed we remove the
metadata from the list. To allow reusing this in the backup code add a
new helper and export it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The underlying resctrl monitoring is actually using 64 bit counters,
not the 32bit one. Correct this by using 64bit data type for reading
hardware value.
To keep the interface consistent, the result of CPU last level cache
that occupied by vcpu processors of specific restrl monitor group is
still reported with a truncated 32bit data type. because, in silicon
world, CPU cache size will never exceed 4GB.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Commit d75f865fb9 caused a job-deadlock if
a VM is running the backup job and being destroyed as it removed the
cleanup of the async job type and there was nothing to clean up the
backup job.
Add an explicit cleanup of the backup job when destroying a VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When cancelling the blockjobs as part of failed backup job startup
recover we didn't pass in the correct async job type. Luckily the block
job handler and cancellation code paths use no block job at all
currently so those were correct.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we delete the images elsewhere it's not required. Additionally
it's safe to do as we never released an upstream version which required
this being in place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While qemu is running both locations are identical in semantics, but the
move will allow us to fix the scenario when the VM is destroyed or
crashes where we'd leak the images.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In contrast to snapshots the backup job does not complain when the
backup job's store file has backing pre-configured. It's actually
required so that the NBD server exposes all the data properly.
Remove our fake termination and use the existing disk source as backing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
qemuDomainObjPrivateDataClear clears state which become invalid after VM
stopped running and the node name allocator belongs there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The waiting loop used QEMU_ASYNC_JOB_NONE rather than 'asyncJob' passed
from the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A few places were importing dirname.h without actually using it.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_get_real_time() returns the time since epoch in microseconds.
It uses gettimeofday() internally while libvirt used clock_gettime
because it is declared async signal safe. In practice gettimeofday
is also async signal safe *provided* the timezone parameter is
NULL. This is indeed the case in g_get_real_time().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_pattern_match function_simple is an acceptably close
approximation of fnmatch for libvirt's needs.
In contrast to fnmatch(), the '/' character can be matched
by the wildcards, there are no '[...]' character ranges and
'*' and '?' can not be escaped to include them literally in
a pattern.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GLib g_lstat() function provides a portable impl for
Win32.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If we use fake reboot then domain goes thru running->shutdown->running
state changes with shutdown state only for short period of time. At
least this is implementation details leaking into API. And also there is
one real case when this is not convinient. I'm doing a backup with the
help of temporary block snapshot (with the help of qemu's API which is
used in the newly created libvirt's backup API). If guest is shutdowned
I want to continue to backup so I don't kill the process and domain is
in shutdown state. Later when backup is finished I want to destroy qemu
process. So I check if it is in shutdowned state and destroy it if it
is. Now if instead of shutdown domain got fake reboot then I can destroy
process in the middle of fake reboot process.
After shutdown event we also get stop event and now as domain state is
running it will be transitioned to paused state and back to running
later. Though this is not critical for the described case I guess it is
better not to leak these details to user too. So let's leave domain in
running state on stop event if fake reboot is in process.
Reconnection code handles this patch without modification. It detects
that qemu is not running due to shutdown and then calls qemuProcessShutdownOrReboot
which reboots as fake reboot flag is set.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We don't need this for any functional purpose, but when debugging hosts
it is useful to know what binary a given capabilities XML document is
associated with.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify repeated code patterns by providing a new constructor taking
the QEMU binary name.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently if the binary path is NULL in the qemu capabilities object,
cache invalidation is skipped. A future patch will ensure that the
binary path is always non-NULL, so a way to explicitly skip invalidation
is required.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'cleanup' flag is doing no cleaup in this function. We can
remove it and return NULL on error or qemuBuildCommandLine().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The g_auto*() changes made by the previous patches made a lot
of 'cleanup' labels obsolete. Let's remove them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change all feasible pointers to use g_autoptr().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will allow us to g_autoptr qemuDomainLogContext pointers
in the following patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Change all feasible strings and scalar pointers to use g_autofree.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserCacheDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserDirectory() *never* *ever* returns NULL, making the checks for
it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous patch made it possible for the QEMU driver to check if
a given PCI hostdev is unassigned, by checking if dev->info->type is
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_UNASSIGNED, meaning that this device
shouldn't be part of the actual guest launch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.
This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.
Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the validation of vmcoreinfo from qemuBuildVMCoreInfoCommandLine()
to qemuDomainDefValidateFeatures(), allowing for validation
at domain define time.
qemuxml2xmltest.c was changed to account for this caps being
now validated at this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move smartcard validation being done by qemuBuildSmartcardCommandLine()
to the existing qemuDomainSmartcardDefValidate() function. This
function is called by qemuDomainDeviceDefValidate(), allowing smartcard
validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move EGL Headless validation from qemuBuildGraphicsEGLHeadlessCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the NVDIMM validation from qemuBuildMachineCommandLine()
to a new function in qemu_domain.c, qemuDomainDeviceDefValidateMemory(),
which is called by qemuDomainDeviceDefValidate(). This allows
NVDIMM validation to occur in domain define time.
It also increments memory hotplug validation, which can be seen
by the failures in the hotplug tests in qemuxml2xmltest.c that
needed to be adjusted after the move.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The current 'for' loop with 5 consecutive 'ifs' inside
qemuBuildHostdevCommandLine can be a bit smarter:
- all 5 'ifs' fails if hostdev->mode is not equal to
VIR_DOMAIN_HOSTDEV_MODE_SUBSYS. This check can be moved to the
start of the loop, failing to the next element immediately
in case it fails;
- all 5 'ifs' checks for a specific subsys->type to build the proper
command line argument (virHostdevIsSCSIDevice and virHostdevIsMdevDevice
do that but within a helper). Problem is that the code will keep
checking for matches even if one was already found, and there is
no way a hostdev will fit more than one 'if' (i.e. a hostdev can't
have 2+ different types). This means that a SUBSYS_TYPE_USB will
create its command line argument in the first 'if', then all other
conditionals will surely fail but will end up being checked anyway.
All of this can be avoided by moving the hostdev->mode comparing
to the start of the loop and using a switch statement with
subsys->type to execute the proper code for a given hostdev
type.
Suggested-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When freeing qemu driver struct members, we forgot to free
@hostcpu and @hostnuma members.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function is supposed to clean up virQEMUDriver structure and
free individual members. However, it's doing that in random order
which makes it hard to track which members are being freed and
which are not. Do the free in reverse order than the structure
definition - assuming that the most important members (like
mutex) are declared first and freed last.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Prior to commit 55ce656463 (first in libvirt 4.6.0), the XML sent to
virDomainAttachDeviceFlags() was parsed only once, and the results of
that parse were inserted into both the live object of the running
domain and into the persistent config. Thus, if MAC address was
omitted from in XML for a network device (<interface>), both the live
and config object would have the same MAC address.
Commit 55ce656463 changed the code to parse the incoming XML twice -
once for live and once for config. This does eliminate the problem of
PCI (/scsi/sata) address conflicts caused by allocating an address
based on existing devices in live object, but then inserting the
result into the config (which may already have a device using that
address), BUT it also means that when the MAC address of a network
device hasn't been specified in the XML, each copy will get a
different auto-generated MAC address.
This results in the MAC address of the device changing the next time
the domain is shutdown and restarted, which creates havoc with the
guest OS's network config.
There have been several discussions about this in the last > 1 year,
attempting to find the ideal solution to this problem that makes MAC
addresses consistent and accounts for all sorts of corner cases with
PCI/scsi/sata addresses. All of these discussions fizzled out because
every proposal was either too difficult to implement or failed to fix
some esoteric case someone thought up.
So, in the interest of solving the MAC address problem while not
making the "other address" situation any worse than before, this patch
simply adds a qemuDomainAttachDeviceLiveAndConfigHomogenize() function
that (for now) copies the MAC address from the config object to the
live object (if the original xml had <mac address='blah'/> then this
will be an effective NOP (as the macs already match)).
Any downstream libvirt containing upstream commit
55ce656463 should have this patch as well.
https://bugzilla.redhat.com/1783411
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we use glib alloc functions, we can drop the 'cleanup' label
and @rv variable and also simplify the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Some variables are not used outside of the for() loop. Move their
declaration to clean up the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
When using the monolithic daemon, then dom->conn has all driver
tables filled in properly and thus it's safe to call an API other
than virDomain*(). However, when using split daemons then
dom->conn has only hypervisor driver table set
(dom->conn->driver) and the rest is NULL. Therefore, if we want
to call a non-domain API (virNetworkLookupByName() in this case),
we have obtain the cached connection object accessible via
virGetConnectNetwork().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If we place qemuDomainInterfaceAddresses() a few lines below the
two functions its using then we can drop forward declarations of
those functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
While at bugfixing, convert the whole function to the new-style memory
allocation handling.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
With NVMe disks, one can start a blockjob with a NVMe disk
that is not visible in domain XML (at least right away). Usually,
it's fairly easy to override this limitation of
qemuDomainGetMemLockLimitBytes() - for instance for hostdevs we
temporarily add the device to domain def, let the function
calculate the limit and then remove the device. But it's not so
easy with virStorageSourcePtr - in some cases they don't
necessarily are attached to a disk. And even if they are it's
done later in the process and frankly, I find it too complicated
to be able to use the simple trick we use with hostdevs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
At the very beginning of the attach function the
qemuDomainStorageSourceChainAccessAllow() is called which
modifies CGroups, locks and seclabels for new disk and its
backing chain. This must be followed by a counterpart which
reverts back all the changes if something goes wrong. This boils
down to calling qemuDomainStorageSourceChainAccessRevoke() which
is done under 'error' label. But not all failure branches jump
there. They just jump onto 'cleanup' label where no revoke is
done. Such mistake is easy to do because 'cleanup' label does
exist. Therefore, dissolve 'error' block in 'cleanup' and have
everything jump onto 'cleanup' label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Because this is a HMP we're dealing with, there is nothing like
class of reply message, so we have to do some string comparison
to guess if the command fails. Well, with NVMe disks whole new
class of errors comes to play because qemu needs to initialize
IOMMU and VFIO for them. You can see all the messages it may
produce in qemu_vfio_init_pci().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now, that we have everything prepared, we can generate command
line for NVMe disks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This capability tracks if qemu is capable of:
-drive file.driver=nvme
The feature was added in QEMU's commit of v2.12.0-rc0~104^2~2.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If a domain has an NVMe disk configured, then we need to allow it
on devices CGroup so that qemu can access it. There is one caveat
though - if an NVMe disk is read only we need CGroup to allow
write too. This is because when opening the device, qemu does
couple of ioctl()-s which are considered as write.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are couple of places where a domain with a VFIO device gets
special treatment: in CGroups when enabling/disabling access to
/dev/vfio/vfio, and when creating/removing nodes in domain mount
namespace. Well, a NVMe disk is a VFIO device too. Fortunately,
we have this qemuDomainNeedsVFIO() function which is the only
place that needs adjustment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If a domain has an NVMe disk configured, then we need to create
/dev/vfio/* paths in domain's namespace so that qemu can open
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We have this beautiful function that does crystal ball
divination. The function is named
qemuDomainGetMemLockLimitBytes() and it calculates the upper
limit of how much locked memory is given guest going to need. The
function bases its guess on devices defined for a domain. For
instance, if there is a VFIO hostdev defined then it adds 1GiB to
the guessed maximum. Since NVMe disks are pretty much VFIO
hostdevs (but not quite), we have to do the same sorcery.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The qemu driver has its own wrappers around virHostdev module (so
that some arguments are filled in automatically). Extend these to
include NVMe devices too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To simplify implementation, some restrictions are added. For
instance, an NVMe disk can't go to any bus but virtio and has to
be type of 'disk' and can't have startupPolicy set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are going to be more disk types that are considered unsafe
with respect to migration. Therefore, move the error reporting
call outside of if() body and rework if-else combo to switch().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Sometimes, we have a PCI address and not fully allocated
virPCIDevice and yet we still want to know its /dev/vfio/N path.
Introduce virPCIDeviceAddressGetIOMMUGroupDev() function exactly
for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Previous patches rendered some of 'cleanup' labels needless.
Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now that all callers of qemuDomainGetHostdevPath() handle
/dev/vfio/vfio on their own, we can safely drop handling in this
function. In near future the decision whether domain needs VFIO
file is going to include more device types than just
virDomainHostdev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are several variables which could be automatically freed
upon return from the function. I'm not changing @tmpPaths (which
is a string list) because it is going to be removed in next
commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In near future, the decision what to do with /dev/vfio/vfio with
respect to domain namespace and CGroup is going to be moved out
of qemuDomainGetHostdevPath() because there will be some other
types of devices than hostdevs that need access to VFIO.
All functions that I'm changing (except qemuSetupHostdevCgroup())
assume that hostdev we are adding/removing to VM is not in the
definition yet (because of how qemuDomainNeedsVFIO() is written).
Fortunately, this assumption is true.
For qemuSetupHostdevCgroup(), the worst thing that may happen is
that we allow /dev/vfio/vfio which was already allowed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
qemuBuildSoundCodecStr() validates if a given QEMU binary
supports the sound codec. This validation can be moved to
qemu_domain.c to be executed in domain define time.
The codec validation was moved to the existing
qemuDomainDeviceDefValidateSound() function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_OBJECT_USB_AUDIO and
QEMU_CAPS_DEVICE_ICH9_INTEL_HDA to a new function in qemu_domain.c,
qemuDomainDeviceDefValidateSound(). This function is called by
qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuBuildTPMDevStr() does TPM model validation that can be moved to
qemu_domain.c, allowing validation in domain define time. This patch
moves it to the existing qemuDomainDeviceDefValidateTPM() function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Console validation is currently being done by qemuBuildConsoleCommandLine().
This patch moves it to a new qemuDomainDefValidateConsole() function. This
new function is then called by qemuDomainDefValidate(), validating the
console in domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the SPICE caps validation from qemuBuildGraphicsSPICECommandLine()
to a new function called qemuDomainDeviceDefValidateSPICEGraphics().
This function is called by qemuDomainDeviceDefValidateGraphics(),
which in turn is called by qemuDomainDefValidate(), validating the graphics
parameters in domain define time.
This validation move exposed a flaw in the 'default-video-type' tests
for PPC64, AARCH64 and s390 archs. The XML was considering 'spice' as
the default video type, which isn't true for those architectures.
This was flying under the radar until now because the SPICE validation
was being made in 'virsh start' time, while the XML validation done in
qemuxml2xmltest.c considers define time.
All other tests were adapted to consider SPICE validation in this
earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the VNC cap validation from qemuBuildGraphicsVNCCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Tests were adapted to consider SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are validations for SDL, VNC, SPICE and EGL_HEADLESS
around several BuildGraphics*CommandLine in qemu_command.c. This
patch starts to move all of them to qemu_domain.c, inside the
existent qemuDomainDeviceDefValidateGraphics() function. This
function is called by qemuDomainDefValidate(), validating the
graphics parameters in domain define time.
In this patch we'll move the SDL validation code from
qemuBuildGraphicsSDLCommandLine(). Tests were adapted to consider
SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the pcihole64 validation being done by
qemuBuildGlobalControllerCommandLine() to the existing function
qemuDomainDeviceDefValidateControllerPCI(), which provides
domain define time validation.
The existing pcihole64 validations in qemu_domain.c were replaced
by the ones moved from qemu_command.c. The reason is that they
are more specific, allowing VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT
and VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT to have distinct validation,
with exclusive QEMU caps and machine types.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the boot validation being done by qemuBuildBootCommandLine()
to to a new qemuDomainDefValidateBoot() function. This new function
is called by qemuDomainDefValidate(), allowing boot validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the PM validation being done by qemuBuildPMCommandLine() to
to a new qemuDomainDefValidatePM() function. This new function
is called by qemuDomainDefValidate(), promoting PM validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
@def->clock validation is done by qemuBuildClockCommandLine() and
qemuBuildClockArgStr(). This patch centralize the validation done
in both these functions to a new qemuDomainDefValidateClockTimers()
function. This new function is then called by qemuDomainDefValidate(),
promoting clock validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU_CAPS_DEVICE_VMGENID is now being validated by
qemuDomainDefValidate().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of qemuBuildHostdevCommandLine() to
qemuDomainDeviceDefValidateHostdev() and qemuDomainMdevDefValidate(),
allowing them to be validated at domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_CHARDEV_FILE_APPEND and
QEMU_CAPS_CHARDEV_LOGFILE to qemuDomainChrSourceDefValidate().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_USB_HUB to a new function in
qemu_domain.c, qemuDomainDeviceDefValidateHub(). This function is
called by qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new function qemuDomainDeviceDefValidateNVRAM() was created
to validate the NVRAM in domain define time. Unit test was
adjusted to account for the extra QEMU_CAPS_DEVICE_NVRAM required
during domain define.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new qemuDomainDefValidateNuma() function was created to host
all the QEMU caps validation being done inside qemuBuildNumaArgStr().
This new function is called by qemuDomainValidateCpuCount()
to allow NUMA validation in domain define time.
Tests were changed to account for the QEMU capabilities
that need to be present at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Next patch will validate QEMU_CAPS_NUMA_DIST in a new qemu_domain.c
function. The code to verify if a NUMA node distance is being
set will still be needed in qemuBuildNumaArgStr() though.
To avoid code repetition, let's put this logic in a helper to be
used in qemuBuildNumaArgStr() and in the new function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Validation of MACHINE_KERNEL_IRQCHIP and MACHINE_KERNEL_IRQCHIP_SPLIT
QEMU caps are now being done in qemuDomainDefValidateFeatures().
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virQEMUCapsSupportsVmport() is now being called inside
qemuDomainDefValidateFeatures() for VIR_DOMAIN_FEATURE_VMPORT
feature.
qemuxml2xmltest.c was changed to account for this caps being
now validated at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a new function called qemuDomainDefValidatePSeriesFeature()
that will center all the PSeries validation done in qemu_command.c.
qemuDomainDefValidatePSeriesFeature() is then called during domain
define time, in qemuDomainDefValidateFeatures().
qemuxml2argvtest.c is also changed to include all the caps that now
are being validated in define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is plenty of distributions that haven't switched to
systemd nor they force their users to (Gentoo, Alpine Linux to
name a few). With the daemon split merged their only option is to
still use the monolithic daemon which will go away eventually.
Provide init scripts for these distros too.
For now, I'm not introducing config files which would correspond
to the init files except for libvirtd and virtproxyd init scripts
where it might be desirable to tweak the command line of
corresponding daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As of commit 2a00ef6e71 which
was released in v5.2.0, we require YAJL to build the QEMU driver.
Remove the checks from code that requires the QEMU driver
or checks that also check for WITH_QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To allow backups work across external snapshots we need to improve the
algorithm which calculates which bitmaps to merge.
The algorithm must look for appropriately named bitmaps in the image and
possibly descend into a backing image if the current image does not have
the bitmap.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This function looks up a named bitmap for a virStorageSource in the data
returned from query-named-block-nodes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The function will require the bitmap topology for the full
implementation. To facilitate testing, add the propagation of the
necessary data beforehand so that the test code can stay unchanged
during the changes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Separate the for now incomplete code that collects the bitmaps to be
merged for an incremental backup into a separate function. This will
allow adding testing prior to the improvement of the algorithm to
include snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The object itself has no extra value and it would make testing the code
harder. Refactor it to remove just the definition pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Re-create any active persistent bitmap in the snapshot overlay image so
that tracking for a checkpoint is persisted. While this basically
duplicates data in the allocation map it's currently the only possible
way as qemu can't mirror the allocation map into a dirty bitmap if we'd
ever want to do a backup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuDomainSnapshotDiskPrepareOne is already called for each disk which
is member of the snapshot so we don't need to iterate through the
snapshot list again to generate members of the 'transaction' command for
each snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For testing purposes it will be beneficial to be able to parse the data
from JSON directly rather than trying to simulate the monitor. Extract
the worker bits and export them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We will need to inspect the presence and attributes for dirty bitmaps.
Extract them when processing reply of query-named-block-nodes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The use of the parseOpaque parameter was mistakenly removed in
commit 4a4132b462
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Dec 3 10:49:49 2019 +0000
conf: don't use passed in caps in post parse method
causing the method to re-fetch qemuCaps that were already just
fetched and put into parseOpaque.
This is inefficient when parsing incoming XML, but for live
XML this is more serious as it means we use the capabilities
for the current QEMU binary on disk, rather than the running
QEMU.
That commit, however, did have a useful side effect of fixing
a crasher bug in the qemu post parse callback introduced by
commit 5e939cea89
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu Sep 26 18:42:02 2019 +0200
qemu: Store default CPU in domain XML
The qemuDomainDefSetDefaultCPU() method in that patch did not
allow for the possibility that qemuCaps would be NULL and thus
resulted in a SEGV.
This shows a risk in letting each check in the post parse
callback look for qemuCaps == NULL. The safer option is to
check once upfront and immediately stop (postpone) further
validation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Don't check os type / virt type / arch in the post-parse callback
because we can't assume qemuCaps is non-NULL at this point. It
also conceptually belongs to the validation callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This function will be removed in a future commit because it allows the
caller to acquire both monitor and agent jobs at the same time. Holding
both job types creates a vulnerability to denial of service from a
malicious guest agent.
qemuDomainSetVcpusFlags() always passes NONE for either the monitor job
or the agent job (and thus is not vulnerable to the DoS), so we can
simply replace this function with the functions for acquiring the
appropriate type of job.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS.
Split the function so that the portion issuing the agent command only
holds an agent job and the portion issuing the monitor command holds
only a monitor job.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding a
monitor job while we're querying the agent, we open ourselves up to a
DoS.
So split the function up a bit to only hold the monitor job while
querying qemu for whether the domain supports suspend. Then acquire only
an agent job while issuing the agent suspend command.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS.
Split the function so that we only hold the appropriate type of job
while rebooting.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have to assume that the guest agent may be malicious so we don't want
to allow any agent queries to block any other libvirt API. By holding
a monitor job while we're querying the agent, we open ourselves up to a
DoS. So split the function into separate parts: one that does the agent
shutdown and one that does the monitor shutdown. Each part holds only a
job of the appropriate type.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the uses passing a single parameter as the length.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
My hesitation to remove VIR_STRDUP without VIR_STRNDUP resulted
in these being able to sneak in.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 7be5fe66cd.
This commit broke resctrl, because it missed the fact that the
virResctrlInfoGetCache() has side-effects causing it to actually
change the virResctrlInfo parameter, not merely get data from
it.
This code will need some refactoring before we can try separating
it from virCapabilities again.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This commit aims to fix
https://bugzilla.redhat.com/show_bug.cgi?id=1610207
The cause was apparently incorrect handling of jobs in snapshot
revert code which allowed a thread executing snapshot delete to
begin job while snapshot revert was still running on another
thread. The snapshot delete thread then waited on a condition
variable in qemuMonitorSend() while the revert thread finished,
changing (and effectively corrupting) the qemuMonitor structure
under the delete thread which led to its crash.
The incorrect handling of jobs in revert code was due to the fact
that although qemuDomainRevertToSnapshot() correctly begins a job
at the start, the job was implicitly ended when qemuProcessStop()
was called because the job lives in the QEMU driver's private
data (qemuDomainObjPrivate) that was purged during
qemuProcessStop().
This fix prevents qemuProcessStop() from clearing jobs as the
idea of qemuProcessStop() clearing jobs seems wrong in the first
place. It was (inadvertently) introduced in commit
888aa4b6b9, which is effectively reverted by
the second hunk of this commit. To preserve the desired effects
of the faulty commit, the first hunk is included as suggested by
Michal.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When QEMU uid/gid is set to non-root this is pointless as if we just
used a regular setuid/setgid call, the process will have all its
capabilities cleared anyway by the kernel.
When QEMU uid/gid is set to root, this is almost (always?) never
what people actually want. People make QEMU run as root in order
to access some privileged resource that libvirt doesn't support
yet and this often requires capabilities. As a result they have
to go find the qemu.conf param to turn this off. This is not
viable for libguestfs - they want to control everything via the
XML security label to request running as root regardless of the
qemu.conf settings for user/group.
Clearing capabilities was implemented originally because there
was a proposal in Fedora to change permissions such that root,
with no capabilities would not be able to compromise the system.
ie a locked down root account. This never went anywhere though,
and as a result clearing capabilities when running as root does
not really get us any security benefit AFAICT. The root user
can easily do something like create a cronjob, which will then
faithfully be run with full capabilities, trivially bypassing
the restriction we place.
IOW, our clearing of capabilities is both useless from a security
POV, and breaks valid use cases when people need to run as root.
This removes the clear_emulator_capabilities configuration
option from qemu.conf, and always runs QEMU with capabilities
when root. The behaviour when non-root is unchanged.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With all plumbing in place, we can now enable the new functionality.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since blockcommit is asynchronous, libvirtd can be restarted while the
operation runs. To ensure the information necessary to finish up the job
is not lost, serialisation to and deserialisation from the status XML is
added.
To unittest this, the new element was only added to the active commit test,
the non-active commit test doesn't have the new element so as to test its
absence.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When blockcommit finishes successfully, one of the
qemuBlockJobProcessEventCompletedCommit() and
qemuBlockJobProcessEventCompletedActiveCommit() event handlers is called.
This is where the delete flag (stored in qemuBlockJobCommitData since the
previous commit) can actually be used to delete the committed snapshot
images if requested.
We use virFileRemove() instead of a simple unlink() to cover the case where
the image to be removed is on an NFS volume.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Propagate the delete flag from qemuDomainBlockCommit() (which was just
ignoring it until now) to qemuBlockJobDiskNewCommit() where it can be
stored in the qemuBlockJobCommitData structure which holds information
necessary to finish the job asynchronously.
In the actual qemuBlockJobDiskNewCommit() in this commit, we temporarily
pass a literal 'false' to preserve the current behaviour until the whole
implementation of the feature is in place.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the individual sub-blockjobs of a backup libvirt job finish we
must detect it and notify the parent job, so that it can be properly
terminated.
Since we update job information to determine success of a blockjob we
can directly report back also statistics of the blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the helper which cancels all blockjobs to perform the backup job
cancellation in qemuDomainAbortJob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use the output of 'query-jobs' to figure out some useful
information about a backup job. That is progress in case of a push job
and scratch file use in case of a pull job.
Add a worker which will total up the data and call it from
qemuDomainGetJobStatsInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backup blockjob needs to be able to notify the parent backup job as
well as track all data to be able to clean up the bitmap and blockdev
used for the backup.
Add the data structure, job allocation function and status XML formatter
and parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store the data of a backup job along with the index counter for new
backup jobs in the status XML. Currently we will support only one
backup job and thus there's no necessity to add arrays of jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the transaction actions generator for blockdev-backup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backup job may consist of many backup sub-blockjobs. Add the new
blockjob type and add all type converter strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will want to use the async job infrastructure along with all the APIs
and event for the backup job so add the backup job as a new async job
type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce QEMU_DOMAIN_JOB_STATS_TYPE_BACKUP and the convertors and other
plumbing to be able to report statistics for the backup job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
$ cat f | grep -e arch -e emulator
<type arch='mipsel'>hvm</type>
$ sudo virsh define f
error: Failed to define domain from f
error: An error occurred, but the cause is unknown
After:
$ sudo virsh define f
error: Failed to define domain from f
error: unsupported configuration: No emulator found for arch 'mipsel'
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
'cfg' is never initialized here, which causes a crash
later in qemuCheckpointCreateFinalize
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For any backing file we set 'read-only' to true, but didn't do this when
modifying the recorded backing store when creating external snapshots.
This meant that qemu would attempt to open the backing-file read-write.
This would fail for example when selinux is used as qemu doesn't have
write permission for the backing file.
https://bugzilla.redhat.com/show_bug.cgi?id=1781079
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nearly all internal APIs use the QEMU capabilities or other
QEMU driver data directly, there's no compelling benefit to create
virCapsPtr at driver startup.
Skipping this means we don't probe capabilities for all 30 system
emulator targets at startup, only those emulators which are referenced
by an XML doc. This massively improves libvirtd startup time when the
capabilities cache is not populated. It even improves startup time
when the cache is up to date, as we don't bother to load files from
the cache until we need them.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We always refresh the capabilities object when using virResctrlInfo
during process startup. This is undesirable overhead, because we can
just directly create a virResctrlInfo instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
host CPU information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Annoyingly there was no existing constructor, and identifying all the
places which do a VIR_ALLOC(cpu) is a bit error prone. Hopefully this
has found & converted them all.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
NUMA information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NUMA cells are stored directly in the virCapsHostPtr
struct. This moves them into their own struct allowing
them to be stored independantly of the rest of the host
capabilities. The change is used as an excuse to switch
the representation to use a GPtrArray too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the domain XML APIs don't use virCapsPtr we can stop passing it
around many QEMU driver methods.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No impl of this callback requires the virCapsPtr anymore.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only user of this callback did not require the virCapsPtr parameter.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU impl of the callback can directly use the QEMU capabilities
cache to resolve the emulator binary name, allowing virCapsPtr to be
dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virCapsPtr param is not used by any of the virt drivers providing
this callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr to get the default security model,
pass this in via the parser config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the disk and chardev seclabels are validated immediately at
the time their data is parsed. This forces the parser to fill in the
top level secmodel at time of parsing which is an undesirable thing.
This validation conceptually should be done in the post-parse phase
instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To enable the virCapsPtr parameter to the post parse method to be
eliminated, the drivers must fetch the virCapsPtr from their own
driver via the opaque parameter, or use an alternative approach
to validate the parsed data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The XML parser currently calls virCapabilitiesDomainDataLookup during
parsing to find the domain capabilities matching the triple
(virt type, os type, arch)
This is, however, bogus with the QEMU driver as it assumes that there
is an emulator known to the default driver capabilities that matches
this triple. It is entirely possible for the driver to be parsing an
XML file with a custom emulator path specified pointing to a binary
that doesn't exist in the default driver capabilities. This will,
for example be the case on a RHEL host which only installs the host
native emulator to /usr/bin. The user can have built a custom QEMU
for non-native arches into $HOME and wish to use that.
Aside from validation, this call is also used to fill in a machine type
for the guest if not otherwise specified. Again, this data may be
incorrect for the QEMU driver because it is not taking account of
the emulator binary that is referenced.
To start fixing this, move the validation to the post-parse callbacks
where more intelligent driver specific logic can be applied.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.
Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.
Finally enforce checking of the return type and mark all parameters
as non-NULL.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virQEMUCapsPtr objects are just empty. Future patches are
going to expect them to contain real data. Start off by populating the
machine types and arch information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.
In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The functions for converting migration typed parameters to QEMU
migration parameters and back were only implemented for integer types.
This patch adds support for string parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With blockdev we need to refer to the nodename of the disk source image
as the source argument for the blockdev-mirror operation while still
keeping the old job name. With blockdev we must also persist the job in
qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Separate out allocation of the virStorageSource corresponding to the
target NBD export of the migration.
As part of the splitout we allocate the export name explicitly as that
one must not change regardless whether blockdev is used or not to
provide compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The non-shared-storage migration tracks the storage source used
explicitly in the migration data so we must allow for processing of the
block job which has NULL mirror as the mirror will not be populated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that the cleanup section does not exist remove the label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuMigrationSrcNBDCopyCancelOne uses the block job data structure but
generated it's own job name rather than taking it from the block job
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With -blockdev we must use the nodename as the export but we must keep
the name of the export as it was before to ensure compatiblity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Declare the variable inside the loop with automatic clearing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuDomainBlockJobSetSpeed was not converted to get the job name from
the block job data. This means that after enabling blockdev the API call
would fail as we wouldn't use the appropriate name.
https://bugzilla.redhat.com/show_bug.cgi?id=1780497
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Where appropriate replace the open coded call with the qemu wrapper
which already reports the error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With this patch users can cold unplug some sound devices.
use "virsh detach-device vm sound.xml --config" command.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jidong Xia <xiajidong@cmss.chinamobile.com>
This is a follow-up to patch series posted in
https://www.redhat.com/archives/libvir-list/2019-November/msg01180.html
It implements a suggestion made by Cole in
https://www.redhat.com/archives/libvir-list/2019-November/msg01207.html
and discussed in follow-up messages as there were no objections to the
change.
The aim is to make the code more readable by replacing nested branching
with a flat structure.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In v5.8.0-rc1~122 we've removed the only use of @safename in
qemuMonitorTextLoadSnapshot(). What we are left with is an
declared but not initialized variable that is passed to
VIR_FREE().
Caught by libvirt-php test suite.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In v5.9.0-370-g8fa0374c5b I've tried to fix a bug by removing
some stale XATTRs in qemuProcessStop(). However, I forgot to
do nothing when the VIR_QEMU_PROCESS_STOP_NO_RELABEL flag was
specified.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Until now we only really aborted migration via qemuDomainAbortJob. This
will change with the upcoming addition of the backup job. Additionally
there were a bunch of if statements checking various aspects of the
current job.
To make it more obvious convert qemuDomainAbortJob to use a switch
statement and move the individual conditions to the appropriate job
type.
Every job type has now it's own case despite multiple job types just
plainly cancelling the job for clarity and future extension.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Following patch will refactor qemuDomainAbortJob to use a per-job-type
switch where we will need to abort a migration job in various branches.
Save some code duplication by introducing a helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We clear some capabilities here so the lockouts need to be
re-evaluated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Blockdev is required to do incremental backups properly. Add a helper
function for locking out capabilities and export it to allow re-doing
the processing if a different code path modifies capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Checking whether a qemu capability set right before clearing it without
any other logic doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Do all post-processing of capabilities in qemuProcessPrepareQEMUCaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Move the post-processing of the QEMU_CAPS_CHARDEV_FD_PASS flag to the
new function.
The clearing of the capability is based on the presence of
VIR_QEMU_PROCESS_START_STANDALONE so we must also pass in the process
start flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Start aggregating all capability post-processing code in one place.
The comment was modified while moving it as it was mentioning floppies
which are no longer clearing the blockdev capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now used only in qemu_process.c so move it there and
name it 'qemuProcessPrepareQEMUCaps' which is more appropriate to what
it's doing.
The reworded comment now mentions that it will also post-process the
caps for VM startup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The redetection was originally added in 43c01d3838 as a way to recover
from libvirtd upgrade from the time when we didn't persist the qemu
capabilities in the status XML. Also this the oldest supported qemu by
more than two years.
Even if somebody would have a running VM running at least qemu 1.5 with
such an old libvirt we certainly wouldn't do the right thing by
redetecting the capabilities and then trying to communicate with qemu.
For now it will be the best to just stop considering this scenario any
more and error out for such VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit c90fb5a828 added explicit use of the private copy of the qemu
capabilities to various places. The change to qemuProcessInit was bogus
though as at the point where we re-initiate the post parse callbacks
priv->qemuCaps is still NULL as we clear it after shutdown of the VM and
don't initiate it until a later point.
Using the value from priv->qemuCaps might mislead readers of the code
into thinking that something useful is being passed at that point so go
with an explicit NULL instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainGetJobInfo didn't always reset the return data in @info.
Thankfully this wouldn't be a problem as the RPC layer does it but we
should do it anyways.
Since we reset the struct we don't have to set the type to
VIR_DOMAIN_JOB_NONE as the value is 0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For managed save we can choose between various compression
methods. I randomly tested the 'xz' program on a 8 GB guest
and was surprised to have to wait > 50 minutes for it to
finish compressing, with 'xz' burning 100% cpu for the
entire time. Despite the impressive compression, this is
completely useless in the real world as it is far too long
to wait to save the VM.
The 'xz' binary defaults to '-6' optimization level which
aims for high compression, with moderate memory usage,
at the expense of speed.
This change switches it to use the '-3' optimization level
which is documented as being the one that optimizes speed
at expense of compression. Even with this, it will still
outperform all the other options in terms of compression
level. It is a little less than x4 faster than '-6' which
means it starts to be a viable choice to use 'xz' for
people who really want best compression.
The test results on a 1 GB, fairly freshly booted VM are
as follows
format | save | restore size
=======+=======+=============
raw | 05s | 1s | 428 MB
lzop | 05s | 3s | 160 MB
gzip | 29s | 5s | 118 MB
bz2 | 54s | 22s | 114 MB
xz | 4m37s | 13s | 86 MB
xz -3 | 1m20s | 12s | 95 MB
Based on this we can say
* For moderate compression with no noticable loss in speed
=> use lzop
* For high compression with moderate loss in speed
=> use gzip
* For best compression with significant loss in speed
=> use xz
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 4b58fdf280 which enabled block copy also for network
destinations needed to limit when the 'mirror' storage source is
initialized in cases when we e.g. don't have an appropriate backend.
Limiting it just to virStorageFileSupportsCreate is too restrictive as
for example we can't precreate block devices and thus wouldn't
initialize the 'mirror' but since it's a local source we'd try to
examine it. This would fail since it wouldn't be initialized.
Fix it by introducing a more granular check whether certain operations
are supported and fix the check interlocks.
https://bugzilla.redhat.com/show_bug.cgi?id=1778058
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We tolerate image format detection during block copy in very specific
circumstances, but the code didn't error out on failure of the format
detection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 2ccb5335dc I've refactored how we fill the typed parameters
for domain statistics. The commit introduced a regression in the
formating of stats for IOthreads by using the array index to label the
entries as it's common for all other types of statistics rather than
the iothread IDs used for iothreads.
Since only the design of iothread deviates from the common approach used
in all other statistic types this was not caught.
https://bugzilla.redhat.com/show_bug.cgi?id=1778014
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have a separate job type which will not trigger normal code
paths for terminating job we can remove the ad-hoc handling.
This possibly fixes the issue of a broken job inheriting the disk and
then finishing in which case we'd not detach the backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To better track jobs we couldn't parse let's introduce a new job type
which will clarify semantics internally in few places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We will need to clear per-job type data when we will be marking a
blockjob as broken in the new way. Extract the code for future reuse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Both failure to refresh and to dismiss the job are very unlikely but if
they happen there's not much we can do about the blockjob.
The concluded job handlers treat it as if the job failed if we don't
update the state to 'QEMU_BLOCKJOB_STATE_COMPLETED' which is probably
the safest thing to do here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Otherwise it would get dropped later on as untracked despite us knowing
about it. Additionally since we cancelled it we must wait to dismiss it
which would not be possible if we unregister it. This also opened a
window for a race condition since the job state change event of the
just-cancelled job might be delivered prior to us unregistering the job
in which case everything would work properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Since we don't know what happened to the job we can't do much about it
but we can at least log that this happened.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We must exit the monitor prior to refusing other work, otherwise the VM
object will become unusable.
This bug was introduced in commit v5.5.0-244-gc412383796 but thankfully
the code path was not excercised without QEMU_CAPS_BLOCKDEV.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Block jobs may be members of async jobs so it makes more sense to
refresh block job state after we do steps for async job recovery.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
qemu returns an error message in the job statistics even if the job was
cancelled to emphasize it was not successful. Libvirt didn't properly
transform it into QEMU_BLOCKJOB_STATE_CANCELLED though.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Commit ed56851f1b didn't wire up fetching of the statistics for the
job which are reported by 'query-jobs'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This reverts commit 421c9550f5
qemuDomainBlockPullCommon calls virDomainObjEndAPI internally so the
original commit made us shed two references of @vm instead of one
getting us into a premature free of @vm.
This is not a straight revert as qemuDomainBlockPull was modified
meanwhile. I've also added a warning comment that @vm is consumed.
https://bugzilla.redhat.com/show_bug.cgi?id=1777230
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
<interface> devices (virDomainNetDef) are a bit different from other
types of devices in that their actual type may come from a network (in
the form of a port connection), and that doesn't happen until the
domain is started. This means that any validation of an <interface> at
parse time needs to be a bit liberal in what it accepts - when
type='network', you could think that something is/isn't allowed, but
once the domain is started and a port is created by the configured
network, the opposite might be true.
To solve this problem hypervisor drivers need to do an extra
validation step when the domain is being started. I recently (commit
3cff23f7, libvirt 5.7.0) added a function to peform such validation
for all interfaces to the QEMU driver -
qemuDomainValidateActualNetDef() - but while that function is a good
single point to call for the multiple places that need to "start" an
interface (domain startup, device hotplug, device update), it can't be
called by the other hypervisor drivers, since 1) it's in the QEMU
driver, and 2) it contains some checks specific to QEMU. For
validation that applies to network devices on *all* hypervisors, we
need yet another interface validation function that can be called by
any hypervisor driver (not just QEMU) right after its network port has
been created during domain startup or hotplug. This patch adds that
function - virDomainActualNetDefValidate(), in the conf directory,
and calls it in appropriate places in the QEMU, lxc, and libxl
drivers.
This new function is the place to put all network device validation
that 1) is hypervisor agnostic, and 2) can't be done until we know the
"actual type" of an interface.
There is no framework for validation at domain startup as there is for
post-parse validation, but I don't want to create a whole elaborate
system that will only be used by one type of device. For that reason,
I just made a single function that should be called directly from the
hypervisors, when they are initializing interfaces to start a domain,
right after conditionally allocating the network port (and regardless
of whether or not that was actually needed). In the case of the QEMU
driver, qemuDomainValidateActualNetDef() is already called in all the
appropriate places, so we can just call the new function from
there. In the case of the other hypervisors, we search for
virDomainNetAllocateActualDevice() (which is the hypervisor-agnostic
function that calls virNetworkPortCreateXML()), and add the call to our
new function right after that.
The new function itself could be plunked down into many places in the
code, but we already have 3 validation functions for network devices
in 2 different places (not counting any basic validation done in
virDomainNetDefParseXML() itself):
1) post-parse hypervisor-agnostic
(virDomainNetDefValidate() - domain_conf.c:6145)
2) post-parse hypervisor-specific
(qemuDomainDeviceDefValidateNetwork() - qemu_domain.c:5498)
3) domain-start hypervisor-specific
(qemuDomainValidateActualNetDef() - qemu_domain.c:5390)
I placed (3) right next to (2) when I added it, specifically to avoid
spreading validation all over the code. For the same reason, I decided
to put this new function right next to (1) - this way if someone needs
to add validation specific to qemu, they go to one location, and if
they need to add validation applying to everyone, they go to the
other. It looks a bit strange to have a public function in between a
bunch of statics, but I think it's better than the alternative of
further fragmentation. (I'm open to other ideas though, of course.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In this case, the virNetDevBandwidthPtr that is returned is not to a
region within the virDomainNetDef arg, but points elsewhere (the
NetDef has the pointer, not the entire object), so technically it's
not necessary to make the return value a const, but it's a bit
disingenuous to *not* do it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This makes it easier to understand which interface's config caused the
error.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The cpuModels member of _virQEMUCapsAccel struct is not a
virObject but regular struct with a free function defined:
qemuMonitorCPUDefsFree(). Use that when clearing parent structure
instead of virObjectUnref() to avoid a memleak:
==212322== 57,275 (48 direct, 57,227 indirect) bytes in 3 blocks are definitely lost in loss record 623 of 627
==212322== at 0x4838B86: calloc (vg_replace_malloc.c:762)
==212322== by 0x554A158: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.6)
==212322== by 0x17B14BF5: qemuMonitorCPUDefsNew (qemu_monitor.c:3587)
==212322== by 0x17B27BA7: qemuMonitorJSONGetCPUDefinitions (qemu_monitor_json.c:5616)
==212322== by 0x17B14B0B: qemuMonitorGetCPUDefinitions (qemu_monitor.c:3559)
==212322== by 0x17A6AFBB: virQEMUCapsFetchCPUDefinitions (qemu_capabilities.c:2571)
==212322== by 0x17A6B2CC: virQEMUCapsProbeQMPCPUDefinitions (qemu_capabilities.c:2629)
==212322== by 0x17A70C00: virQEMUCapsInitQMPMonitorTCG (qemu_capabilities.c:4769)
==212322== by 0x17A70DDF: virQEMUCapsInitQMPSingle (qemu_capabilities.c:4820)
==212322== by 0x17A70E99: virQEMUCapsInitQMP (qemu_capabilities.c:4848)
==212322== by 0x17A71044: virQEMUCapsNewForBinaryInternal (qemu_capabilities.c:4891)
==212322== by 0x17A7119C: virQEMUCapsNewData (qemu_capabilities.c:4923)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
On s390 machines host-passthrough and host-model CPUs result in the same
guest ABI (with QEMU new enough to be able to tell us what "host" CPU is
expanded to, which was implemented around 2.9.0). So instead of using
host-passthrough CPU when there's no CPU specified in a domain XML we
can safely use host-model and benefit from CPU compatibility checks
during migration, snapshot restore and similar operations.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a graphics device was added to XML that had no video device, libvirt
automatically added a video device which was always of type 'cirrus' on
x86_64, even if the underlying qemu didn't support cirrus.
This patch refines a bit the decision about the type of the video device.
Based on QEMU capabilities, cirrus is still preferred but only added if
QEMU supports it, otherwise VGA is used if supported by QEMU. There is now
no fallback as libvirt only aspires to generate a basic working config and
leaves anything more specific up to higher-level management tools.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
The default video device type selection algorithm we're about to deploy will
increase the amount of code dedicated to the task by amount enough to warrant
factoring the whole thing into its own function so as not to pollute the
caller qemuDomainDeviceVideoDefPostParse(). Do it now so that the actual
algorithm change later on is in a clean commit by itself and easy to review.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
This previous commit introduced a simpler free callback for
hash data with only 1 arg, the value to free:
commit 49288fac96
Author: Peter Krempa <pkrempa@redhat.com>
Date: Wed Oct 9 15:26:37 2019 +0200
util: hash: Add possibility to use simpler data free function in virHash
It missed two functions in the hash table code which need
to call the alternate data free function, virHashRemoveEntry
and virHashRemoveSet.
After the previous patch though, there is no code that
makes functional use of the 2nd key arg in the data
free function. There is merely one log message that can
be dropped.
We can thus purge the current virHashDataFree callback
entirely, and rename virHashDataFreeSimple to replace
it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that all pieces are in place (hopefully) let's enable -blockdev.
We base the capability on presence of the fix for 'auto-read-only' on
files so that blockdev works properly, mandate that qemu supports
explicit SCSI id strings to avoid ABI regression and that the fix for
'savevm' is present so that internal snapshots work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'savevm' HMP command didn't work properly with blockdev as it tried
to do snapshot of everything including the protocol nodes accessing
files which are not snapshottable. Qemu fixed this bug so now we need to
detect it to allow enabling blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The top level commands now can have 'feature' flags for fixes so add
support for querying those as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Initial implementation of 'auto-read-only' didn't reopen the backing
files when needed. For '-blockdev' to work we need to be able to tel
qemu to open a file read-only and change it during blockjobs as we label
backing chains with a sVirt label which does not allow writing. The
dynamic auto-read-only supports this as it reopens files when writing
is demanded.
Add a capability to detect that the posix file based backends support
the dynamic part.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemu driver will obey <backingStore> when we support blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If user starts a blockcommit or a blockcopy then we modify access
for qemu on both images and leave it like that until the job
terminates. So far so good. Problem is, if user instead of
terminating the job (where we would modify the access again so
that the state before the job is restored) calls destroy on the
domain or if qemu dies whilst executing the block job. In this
case we don't ever clear the access we granted at the beginning.
To fix this, maybe a bit harsh approach is used, but it works:
after all labels were restored (that is after
qemuSecurityRestoreAllLabel() was called), we iterate over each
disk in the domain and remove XATTRs from the whole backing chain
and also from any file the disk is being mirrored to.
This would have been done at the time of pivot, but it isn't
because user decided to kill the domain instead. If we don't do
this and leave some XATTRs behind the domain might be unable to
start.
Also, secdriver can't do this because it doesn't know if there is
any job running. It's outside of its scope - the hypervisor
driver is responsible for calling secdriver's APIs.
Moreover, this is safe to call because we don't remember labels
for any member of a backing chain except of the top layer. But
that one was restored in qemuSecurityRestoreAllLabel() call done
earlier. Therefore, not only we don't remember labels (and thus
this is basically a NOP for other images in the backing chain) it
is also safe to call this when no blockjob was started in the
first place, or if some parts of the backing chain are shared
with some other domains - this is NOP, unless a block job is
active at the time of domain destroy.
https://bugzilla.redhat.com/show_bug.cgi?id=1741456#c19
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are four places where we remove image XATTRs and in all of
them we have the same for() loop with the same body. Move it into
a separate function because I'm about to introduce fifth place
where the same needs to be done.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Install the convertor function which enables the internals that will use
-blockdev to make qemu open the firmware image and stop using -drive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The old way to instantiate a pflash device via -drive was a hack since
it's a platform device.
The modern approach calls for configuring it via -machine and takes the
node name as an argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As a first step we will build the blockdevs which will be supposed to
back the pflash drives when moving away from -drive.
This code is similar to the way we build the blockdevs for the disk, but
skips the copy-on-read layer and doesn't implement any legacy approach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a helper which will covert the PFLASH code file and variable file
into the virStorageSource objects stored in private data so that we can
use them with -blockdev while keeping the infrastructure to determine
the path to the loaders intact.
This is a temporary solution until we will want to do snapshots of the
pflash where we will be forced do track the full backing chain in the
XML.
In the meanwhile just convert it partially so that we can stop using
-drive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To allow converting the pflash drives to blockdev we will need a
virStorageSource to allow using our helpers. Temporarily prior to
coverting loader data to a virStorageSoruce add private data which will
house this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extract the old way to instantiate pflash devices to hold the firmware
via -drive to a separate function so that it can later be conditionally
disabled when -blockdev will be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 5751a0b6b1 added a helper function
called virDomainCapsFeaturesInitUnsupported which initialized all domain
capability features as unsupported.
When adding a new feature this would initialize it as unsupported also
for hypervisor drivers which the original author possibly didn't intend
to modify. To prevent accidental wrong value being reported in such case
revert back to initializing individual features in the hypervisor
drivers themselves.
This is not a straight revert as additonal patches modified how we store
the capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a domain without a CPU model specified in the domain XML,
QEMU will choose a default one. Which is fine unless the domain gets
migrated to another host because libvirt doesn't perform any CPU ABI
checks and the virtual CPU provided by QEMU on the destination host can
differ from the one on the source host.
With QEMU 4.2.0 we can probe for the default CPU model used by QEMU for
a particular machine type and store it in the domain XML. This way the
chosen CPU model is more visible to users and libvirt will make sure
the guest will see the exact same CPU after migration.
Architecture specific notes
- aarch64: We only set the default CPU for TCG domains as KVM requires
explicit "-cpu host" to work.
- ppc64: The default CPU for KVM is "host" thanks to some hacks in QEMU,
we will translate the default model to the model corresponding to the
host CPU ("POWER8" on a Power8 host, "POWER9" on Power9 host, etc.).
This is not a problem as the corresponding CPU model is in fact an
alias for "host". This is probably not ideal, but it's not wrong and
the default virtual CPU configured by libvirt is the same QEMU would
use. TCG uses various CPU models depending on machine type and its
version.
- s390x: The default CPU for KVM is "host" while TCG defaults to "qemu".
- x86_64: The default CPU model (qemu64) is not runnable on any host
with KVM, but QEMU just disables unavailable features and starts
happily.
https://bugzilla.redhat.com/show_bug.cgi?id=1598151https://bugzilla.redhat.com/show_bug.cgi?id=1598162
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU 4.2.0 will report default CPU types used by each machine type and
we will want to start using it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Almost all TCG query-machines replies match KVM. The only exceptions are
4.2.0 replies on s390x which differ in the reported default CPU type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some specifics of machine types may depend on the accelerator and thus
the data should be moved to virQEMUCapsAccel. The TCG machine types are
just copied from the ones probed for KVM to simplify the changes to
qemucapabilitiestest data files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function copies machine type data from one QEMU caps structure to
another.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for making machine types dependent on the accelerator,
the <machine> elements are formatted between <cpu type='kvm'> and
<cpu type='tcg'>.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the code for formatting machine type data was moved to a standalone
virQEMUCapsFormatMachines function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the code for loading machine type data was moved to a standalone
virQEMUCapsLoadMachines function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid duplicating code which selects the right virQEMUCapsAccel data
to be filled during probing.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is a tiny wrapper around virQEMUCapsProbeQMPCPUDefinitions which will
soon get private parameters and thus it cannot be exposed outside
qemu_capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
And make it use virQEMUCapsGetAccel once rather than repeating the same
code in all functions called from virQEMUCapsFormatAccel.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
And make it use virQEMUCapsGetAccel once rather than repeating the same
code in all functions called from virQEMUCapsLoadAccel.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can be used to get the pointer to all data which depend on
the accelerator.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is container for capabilities data that depend on the accelerator.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new functions are designed to load and format capabilities which
depend on the accelerator (host CPU expansion and CPU models).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to create a mapping between CPU model names and their
corresponding QOM types.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will need to keep some QEMU-specific data for each CPU model
supported by a QEMU binary. Instead of complicating the generic
virDomainCapsCPUModelsPtr, we can just directly store
qemuMonitorCPUDefsPtr returned by the capabilities probing code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most of the code moved to a new virQEMUCapsFetchCPUDefinitions function
and the existing virQEMUCapsFetchCPUModels just becomes a small wrapper
around virQEMUCapsFetchCPUDefinitions and virQEMUCapsCPUDefsToModels.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The functions return virDomainCapsCPUModelsPtr and thus they should be
called *CPUModels for consistency. Functions called *CPUDefinitions will
work on qemuMonitorCPUDefsPtr.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function translates qemuMonitorCPUDefsPtr (used by QEMU caps probing
code) into virDomainCapsCPUModelsPtr used by domain capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While virDomainCapsCPUModel structure contains 'usable' field with
virDomainCapsCPUUsable type, the lower level structure specific to QEMU
driver used virTriStateBool for the same thing and we had to translate
between them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
