Due to a rather unfortunate misunderstanding, we were parsing the list
of defined devices from mdevctl incorrectly. Since my primary
development machine only has a single device capable of mdevs, I
apparently neglected to test multiple parent devices and made some
assumptions based on reading the mdevctl code. These assumptions turned
out to be incorrect, so the parsing failed when devices from more than
one parent device were returned.
The details: mdevctl returns an array of objects representing the
defined devices. But instead of an array of multiple objects (with each
object representing a parent device), the array always contains only a
single object. That object has a separate property for each parent
device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is possible to define/edit(in shut off state) a domain XML with
same hostdev device repeated more than once, as shown below. This
behavior is not expected. So, this patch fixes it.
vser1:
<domain type='kvm'>
[...]
<devices>
[...]
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0005'/>
</hostdev>
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0006'/>
</hostdev>
[...]
</devices>
</domain>
$ virsh define vser1
Domain 'vser1' defined from vser1
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already reject TPM 1.2 in a number of scenarios; let's add
ARM virt guests to the list.
https://bugzilla.redhat.com/show_bug.cgi?id=1970310
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of providing the configuration explicitly, let libvirt
fill in the blanks. After the recent changes, this results in a
working configuration without the need for user input.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The TPM 2.0 specification predates ARM virtualization, and so
implementing TPM 1.2 support on ARM was not considered a useful
endeavor.
This is technically a breaking change, but TPM support on ARM was
only introduced fairly recently (libvirt 7.1.0) and the previous
default resulted in non working TPM devices; anyone who has a
working configuration is not going to be affected.
https://bugzilla.redhat.com/show_bug.cgi?id=1970310
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to change the input file later, and having this
additional coverage will demonstrate that such a change does not
alter the behavior.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current information is not accurate, because the default
is 2.0 instead of 1.2 for the tpm-crb and tpm-spapr models.
Any detailed list will surely become obsolete and out of sync
with reality over time, so let's just document that the default
model depends on a number of factors and avoid getting any more
specific than that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A process can access a file if the set of MCS categories
for the file is equal-to *or* a subset-of, the set of
MCS categories for the process.
If there are two VMs:
a) svirt_t:s0:c117
b) svirt_t:s0:c117,c720
Then VM (b) is able to access files labelled for VM (a).
IOW, we must discard case where the categories are equal
because that is a subset of many other valid category pairs.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/153
CVE-2021-3631
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Mention fixing of disk iothread validation and the disk serial
truncation state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
There are few cases where we execute a virCommand with all caps
cleared (virCommandClearCaps()). For instance
dnsmasqCapsRefreshInternal() does just that. This means, that
after fork() and before exec() the virSetUIDGIDWithCaps() is
called. But since the caller did not want to change anything,
just drop capabilities, these are the values of arguments:
virSetUIDGIDWithCaps (uid=-1, gid=-1, groups=0x0, ngroups=0,
capBits=0, clearExistingCaps=true)
This means that indeed all capabilities will be dropped,
including CAP_SETPCAP. But this capability controls whether
capabilities can be set, IOW whether capng_apply() succeeds.
There are two calls of capng_apply() in the function. The
CAP_SETPCAP is dropped after the first call and thus the other
call (capng_apply(CAPNG_SELECT_BOUNDS);) fails.
The solution is to keep the capability for as long as needed
(just like CAP_SETGID and CAP_SETUID) and drop it only at the
very end (just like CAP_SETGID and CAP_SETUID).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1949388
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The macro can take multiple arguments, and the calls are more efficient
if done in one go.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
I noticed the following denial when running confined VMs with the QEMU
driver
type=AVC msg=audit(1623865089.263:865): apparmor="DENIED" operation="open" \
profile="virt-aa-helper" name="/etc/ssl/openssl.cnf" pid=12503 \
comm="virt-aa-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Allow reading the file by including the openssl abstraction in the
virt-aa-helper profile.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
I noticed the following denial messages from apparmor in audit.log when
starting confined VMs via the QEMU driver
type=AVC msg=audit(1623864006.370:837): apparmor="DENIED" operation="open" \
profile="virt-aa-helper" name="/etc/libnl/classid" pid=11265 \
comm="virt-aa-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
type=AVC msg=audit(1623864006.582:849): apparmor="DENIED" operation="open" \
profile="libvirt-0ca2720d-6cff-48bb-86c2-61ab9a79b6e9" \
name="/etc/libnl/classid" pid=11270 comm="qemu-system-x86" \
requested_mask="r" denied_mask="r" fsuid=107 ouid=0
It is possible for site admins to assign names to classids in this file,
which are then used by all libnl tools, possibly those used by libvirt.
To be on the safe side, allow read access to the file in the virt-aa-helper
profile and the libvirt-qemu abstraction.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Update the caps data for the upcoming qemu version.
Notable changes are:
- 'query-sev-attestation-report' command added
- 'sample-pages' members for dirty rate calculation added
- 'qtest' device added
- 'share' member added to query-memdev and 'reserve' members added to
query-memdev/memory-backend-[file,memfd,ram]
- 'qemu-vdagent' chardev added
- 'mptcp' toggle added to inet servers
- 'zstd' compression for qcow2
- new cpu models: - "Snowridge-v3"
- "Skylake-Server-v5"
- "Skylake-Client-v4"
- "Icelake-Server-v5"
- "Icelake-Client-v3"
- "Dhyana-v2"
- "Denverton-v3"
- "Cooperlake-v2"
- "Cascadelake-Server-v5"
- 'avx-vnni' added to some existing cpu models
- 'model-id' is now being reported as the host cpu again rather than
QEMU TCG as I've noted in previous bump
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The base OS image might include outdated contents, and we don't
want to get spurious failures caused by bugs that have already been
fixed in the respective packages.
This is particularly important on macOS, because 'brew install foo'
will fail if 'foo' is already installed but outdated: upgrading all
packages first ensures we never run into this scenario.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When 'driver_remote' is 'auto', the 'enabled()' method does not
evaluate to true, causing the libssh/libssh2 checks to be skipped.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The host key fingerprint for SSH servers is used in a scenario where
cryptographic strength is important. We should thus be defaulting to
use of SHA256 where available. We only need SHA1 for Ubuntu 18.04
which does not have libssh >= 0.8.1
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cleanup to follow. This removes the last re-use of `nodes` in this function,
eliminating two VIR_FREEs.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
`feature` is always one of the values listed in the switch,
ensured by `virDomainKVMTypeFromString` above.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be inlined and
simplified. This also removes the re-use of `nodes`, elimininating
two VIR_FREEs.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Vast majority of device types is not supported by the Cloud-Hypervisor
driver. Simplify the error reporting by using
virDomainDeviceTypeToString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
