If formatting NUMA topology fails, the function returns immediatelly,
but the buffer structure allocated on the stack references lot of
heap-allocated memory and that would get lost in such case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
qemuProcessVerifyHypervFeatures is supposed to check whether all
requested hyperv features were actually honored by QEMU/KVM. This is
done by checking the corresponding CPUID bits reported by the virtual
CPU. In other words, it doesn't work for string properties, such as
VIR_DOMAIN_HYPERV_VENDOR_ID (there is no CPUID bit we could check). We
could theoretically check all 96 bits corresponding to the vendor
string, but luckily we don't have to check the feature at all. If QEMU
is too old to support hyperv features, the domain won't even start.
Otherwise, it is always supported.
Without this patch, libvirt refuses to start a domain which contains
<features>
<hyperv>
<vendor_id state='on' value='...'/>
</hyperv>
</features>
reporting internal error: "unknown CPU feature __kvm_hv_vendor_id.
This regression was introduced by commit v3.1.0-186-ge9dbe7011, which
(by fixing the virCPUDataCheckFeature condition in
qemuProcessVerifyHypervFeatures) revealed an old bug in the feature
verification code. It's been there ever since the verification was
implemented by commit v1.3.3-rc1-5-g95bbe4bf5, which effectively did not
check VIR_DOMAIN_HYPERV_VENDOR_ID at all.
https://bugzilla.redhat.com/show_bug.cgi?id=1439424
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Introduce STRICT_FRAME_LIMIT_CFLAGS that will be used for
production code and RELAXED_FRAME_LIMIT_CFLAGS for tests.
Raising the limit for tests allows building them with clang
with optimizations disabled.
This header file has been created so that we can expose
internal functions to the test suite without making them
public: those in qemu_capabilities.h bearing the comment
/* Only for use by test suite */
are obvious candidates for being moved over.
Fixing make syntax-check broken by commit 4da534c0b9.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
This function runs an iscsi command and parses its output.
However, due to the nature of things, virISCSIExtractSession()
callback can be called multiple times. In each run it would
allocate new memory and overwrite the variable where we keep
pointer to it and thus leaking old allocations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Even though the virMacMap object is not necessarily created at
the same time as the network object, the former makes no sense
without the latter and thus should be unref'd in the network
object dispose function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Imagine that this function is called twice over the same disk
source. While in the first run all allocated memory is freed, not
all pointers are set to NULL (e.g. def->srcpool). So when called
again, these poitners are freed again resulting in double free.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After restart of libvirtd the 'checkPool' method is supposed to validate
that the pool is online. Since libvirt then refreshes the pool contents
anyways just return whether the pool was supposed to be online so that
the code can be reached. This is necessary since if a pool does not
implement the method it's automatically considered as inactive.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1436065
docs/schemas directory is meant for schemas which are installed on the
system. The schema for the news file does not need to be installed.
Store it along with the file it describes for simplicity.
qemu requires that the topology equals to the maximum vcpu count.
Document this along with the API to set maximum vcpu count and the XML
element.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426220
Use the relative lookup specifier rather than the global one. Otherwise
only the first name would be looked up. Add a test case to cover the
scenario.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1436574
The native gluster pool source list data differs from the data used for
attaching gluster volumes as netfs pools. Currently the only difference
was the format. Since native pools don't use it and later there will be
more differences add a more deterministic way to switch between the
types instead.
Similar to commit b202c39 ignore the warning that breaks the build
with clang:
util/virnetlink.c:365:52: error: cast from 'char *' to 'struct nlmsghdr *'
increases required alignment from 1 to 4 [-Werror,-Wcast-align]
for (msg = resp; NLMSG_OK(msg, len); msg = NLMSG_NEXT(msg, len)) {
^~~~~~~~~~~~~~~~~~~~
/usr/include/linux/netlink.h:87:7: note: expanded from macro 'NLMSG_NEXT'
(struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buggy condition meant that vcpu0 would not be iterated in the checks.
Since it's not hotpluggable anyways we would not be able to break the
configuration of a live VM.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1437013
Like all devices, add the 'id' option for mdevs as well. Patch also
adjusts the test accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438431
Signed-off-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1371892
The 'capacity' value (e.g. guest logical size) for a LUKS volume is
smaller than the 'physical' value of the file in the file system, so
we need to account for that.
When peeking at the encryption information about the volume add a fetch
of the payload_offset which is described as the offset to the start of
the volume data (in 512 byte sectors) in QEMU's QCryptoBlockLUKSHeader.
Then adjust the ->capacity appropriately when we determine that the
volume target encryption has a payload_offset value.
Add check for more than one RTA_OIF, even though this is rather
unlikely.
Get rid of the buggy switch / break as this code won't need to
handle more attributes.
Use VIR_WARNINGS_NO_CAST_ALIGN to fix impossible to fix
util/virnetdevip.c:560:17: error: cast increases required alignment of target type [-Werror=cast-align]
Depending on the architecture, requirements for ACPI and UEFI can
be different; more specifically, while on x86 UEFI requires ACPI,
on aarch64 it's the other way around.
Enforce these requirements when validating the domain, and make
the error message more accurate by mentioning that they're not
necessarily applicable to all architectures.
Several aarch64 test cases had to be tweaked because they would
have failed the validation step otherwise.
Now that the NO_ACPI and NO_HPET capabilities are set
automatically by virQEMUCapsInitQMPBasicArch() if
appropriate for the architecture, they shouldn't be
used manually to avoid masking bugs.
The capabilities used in test cases should match those used
during normal operation for the tests to make any sense.
This results in the generated command line for a few test
cases (most notably non-x86 test cases that were wrongly
assuming they could use -no-acpi) changing.
Instead of having a single function that probes the
architecture from the monitor and then sets a bunch of
basic capabilities based on it, have a separate function
for each part: virQEMUCapsInitQMPArch() only sets the
architecture, and virQEMUCapsInitQMPBasicArch() only sets
the capabilities.
This split will be useful later on, when we will want to
set basic capabilities from the test suite without having
to go through the pain of mocking the monitor.
Creating dummy <change> elements was a workaround for the
HTML DTD not allowing empty <ul> elements, but we can do
better by tweaking the the XSLT stylesheet.
Now that the source file is validated against a schema that
only allows the <code> HTML tag to be used, we can rely on
that assumption to simplify our XSLT stylesheet.
If a transient storage pool is deemed inactive after libvirtd restart it
would not be deleted from the list. Reuse virStoragePoolUpdateInactive
along with a refactor necessary to properly update the state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1242801
After a pool is made inactive the definition objects need to be updated
(if a new definition is prepared) and transient pools need to be
completely removed. Split out the code doing these steps into a separate
function for later reuse.
When registering a storage poll backend, the code would use
virStorageTypeToString instead of virStoragePoolTypeToString. The
following message would be logged:
virDriverLoadModuleFunc:71 : Lookup function 'virStorageBackendSCSIRegister'
virStorageBackendRegister:174 : Registering storage backend '(null)'
Sometimes it may be desired to validate individual files against a
schema. Refactor the data structures to unify them and introduce a new
macro DO_TEST_FILE(schema, xmlfile) which will test the XML file against
the given schema file.
