This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1029732
The BZ asked for the capability to change the number of queues used by
a virtio-net device while the device is in use. Because the number of
queues can only be set at the time the device is created, that isn't
possible. However, libvirt also shouldn't be silently reporting
success when someone tries to change the number of queues. So this
patch flags that as an error (just as attempts to change any of the
other virtio-specific parameters already do).
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=888635
(which was already closed as CANTFIX because the qemu "-boot strict"
commandline option wasn't available at the time).
Problem: you couldn't have a domain that used PXE to boot, but also
had an un-bootable disk device *even if that disk wasn't listed in the
boot order*, because if PXE timed out (e.g. due to the bridge
forwarding delay), the BIOS would move on to the next target, which
would be the unbootable disk device (again - even though it wasn't
given a boot order), and get stuck at a "BOOT DISK FAILURE, PRESS ANY
KEY" message until a user intervened.
The solution available since sometime around QEMU 1.5, is to add
"-boot strict=on" to *every* qemu command. When this is done, if any
devices have a boot order specified, then QEMU will *only* attempt to
boot from those devices that have an explicit boot order, ignoring the
rest.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1035188
Commit f094aaac48 changed the PCI device assignment in qemu domains
to default to using VFIO rather than legacy KVM device assignment
(when VFIO is available). It didn't change which driver was used by
default for virNodeDeviceDetachFlags(), though, so that API (and the
virsh nodedev-detach command) was still binding to the pci-stub
driver, used by legacy KVM assignment, by default.
This patch publicizes (only within the qemu module, though, so no
additions to the symbol exports are needed) the functions that check
for presence of KVM and VFIO device assignment, then uses those
functions to decide what to do when no driver is specified for
virNodeDeviceDetachFlags(); if the vfio driver is loaded, the device
will be bound to vfio-pci, or if legacy KVM assignment is supported on
this system, the device will be bound to pci-stub; if neither method
is available, the detach will fail.
Currently the snapshot code did not check if it actually supports
snapshots on various disk backends for domains. To avoid future problems
add checkers that whitelist the supported configurations.
This patch adds function qemuGetDriveSourceString to produce
qemu-compatible disk source strings that will enable to reuse the code
and refactors building of the qemu commandline of disks to use this new
helper.
Automatically assign secret type from the disk source definition and
pull in adding of the comma. Then update callers to keep generated
output the same.
Before this patch, the translation function still needs a second ugly
helper function to actually format the command line for qemu. But if we
do the right stuff in the translation function, we don't have to bother
with the second function any more.
This patch removes the messy qemuBuildVolumeString function and changes
qemuTranslateDiskSourcePool to set stuff up correctly so that the
regular code paths meant for volumes can be used to format the command
line correctly.
For this purpose a new helper "qemuDiskGetActualType()" is introduced to
return the type of the volume in a pool.
As a part of the refactor the qemuTranslateDiskSourcePool function is
fixed to do decisions based on the pool type instead of the volume type.
This allows to separate pool-type-specific stuff more clearly and will
ease addition of other pool types that will require certain other
operations to get the correct pool source.
The previously fixed tests should make sure that we don't break stuff
that was working before.
Though trying to destroy a physical HBA doesn't make sense at all,
it's still a bit misleading with saying "only works for HBA".
Signed-off-by: Osier Yang <jyang@redhat.com>
The virDomainGetBlockJobInfo method did not zero out the
virDomainBlockJobInfo pointer arg, so when block jobs were
not active it would return garbage for the bandwidth/cur/end
fields.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When doing an internal snapshot on a VM with sheepdog or RBD disks we
would not set a flag to mark the domain is using internal snapshots and
might end up creating a mixed snapshot. Move the setting of the variable
to avoid this problem.
Consider the following valid snapshot XML as the <driver> element is
allowed to be empty in the domainsnapshot.rng schema:
$ cat snap.xml
<domainsnapshot>
<disks>
<disk name='vda' snapshot='external'>
<source file='/tmp/foo'/>
<driver/>
</disk>
</disks>
</domainsnapshot>
produces the following error:
$ virsh snapshot-create domain snap.xml
error: internal error: unknown disk snapshot driver '(null)'
The driver type is parsed as NULL from the XML as the attribute is not
present and then directly used to produce the error message.
With this patch the attempt to parse the driver type is skipped if not
present to avoid changing the schema to forbid the empty driver element.
Disk source elements for snapshots were using separate code from our
config parser. As snapshots can be stored on more than just regular
files, we will need the universal parser to allow us to expose a variety
of snapshot disk targets. This patch reuses the config parsers and
formatters to do the job.
This initial support only changes the code without any visible XML
change.
Avoid if statements when used with virBufferEscapeString which
automaticaly omits the whole string. Also add some line breaks to
visualy separate the code.
The <source> element formatting function was expecting a
virDomainDiskDefPtr to store the data. As snapshots are not using this
data structure to hold the data, we need to add an internal function
which splits out individual fields separately.
The original code ignored errors of virDomainHostdevDefAlloc,
however, we should properly do error return from the function
if it occurs.
The fix pulls out virDomainHostdevDefAlloc from the loop and
executes it all together before the loop. So we can easily
return on errors without the notion of other memory allocations
in the loop.
The deallocation code is separated from the allocation code
because it will be used by a further patch for fixing other error
handlings.
Reported-by: Laine Stump <laine@laine.org>
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
The fixed loop used logical OR to combine two conditions, however,
it is apparently incorrect and logical AND is correct.
We can fix it by replacing OR with AND, but this patch instead
fixes the problem by getting rid of the first conditional
statement: USBFilterCount < def->nhostdevs. It isn't needed
because USBFilterCount will never be greater than or equal to
def->nhostdevs.
def->nhostdevs is calculated in the following code
above the loop in question like this:
for (i = 0; i < deviceFilters.count; i++) {
PRBool active = PR_FALSE;
IUSBDeviceFilter *deviceFilter = deviceFilters.items[i];
deviceFilter->vtbl->GetActive(deviceFilter, &active);
if (active) {
def->nhostdevs++;
}
}
And the loop is constructed as like this:
for (i = 0; (USBFilterCount < def->nhostdevs) || (i < deviceFilters.count); i++) {
PRBool active = PR_FALSE;
(snip)
deviceFilter->vtbl->GetActive(deviceFilter, &active);
if (!active)
continue;
(snip)
USBFilterCount++;
}
So def->nhostdevs is the number of active device filters and
USBFilterCount is counted up only when a device filter is active.
Thus, we can remove USBFilterCount < def->nhostdevs safely.
Reported-by: Laine Stump <laine@laine.org>
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
While running nwfilterxml2xmltest, it was found that valgrind pointed out the
following error...
==7466== 16 bytes in 1 blocks are definitely lost in loss record 26 of 90
==7466== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==7466== by 0x4C651AD: virAlloc (viralloc.c:142)
==7466== by 0x4D0450D: virNWFilterDefParseNode (nwfilter_conf.c:2575)
==7466== by 0x4D05D84: virNWFilterDefParse (nwfilter_conf.c:2647)
==7466== by 0x401FDE: testCompareXMLToXMLHelper (nwfilterxml2xmltest.c:39)
==7466== by 0x402DE1: virtTestRun (testutils.c:138)
==7466== by 0x4018E9: mymain (nwfilterxml2xmltest.c:111)
==7466== by 0x403482: virtTestMain (testutils.c:593)
==7466== by 0x341F421A04: (below main) (libc-start.c:225)
...21 times, which are related to 21 tests in nwfilterxml2xmltest.c which sent
EXPECT_WARN = false. There were two scenarios in virNWFilterDefParseXML(),
when the variable 'entry' was malloc'ed, but not freed.
This patch fixes the memory leaks found while running qemuxml2argvtest
==8260== 3 bytes in 1 blocks are definitely lost in loss record 1 of
129
==8260== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==8260== by 0x341F485E21: strdup (strdup.c:42)
==8260== by 0x4CADCFF: virStrdup (virstring.c:554)
==8260== by 0x4CBB839: virXPathString (virxml.c:90)
==8260== by 0x4CE753A: virDomainDefParseXML (domain_conf.c:11478)
==8260== by 0x4CEB4FE: virDomainDefParseNode (domain_conf.c:12742)
==8260== by 0x4CEB675: virDomainDefParse (domain_conf.c:12684)
==8260== by 0x425958: testCompareXMLToArgvHelper (qemuxml2argvtest.c:107)
==8260== by 0x427111: virtTestRun (testutils.c:138)
==8260== by 0x41D3FE: mymain (qemuxml2argvtest.c:452)
==8260== by 0x4277B2: virtTestMain (testutils.c:593)
==8260== by 0x341F421A04: (below main) (libc-start.c:225)
==8260==
==8260== 4 bytes in 1 blocks are definitely lost in loss record 5 of
129
==8260== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==8260== by 0x341F485E21: strdup (strdup.c:42)
==8260== by 0x4CADCFF: virStrdup (virstring.c:554)
==8260== by 0x4CBB839: virXPathString (virxml.c:90)
==8260== by 0x4CE753A: virDomainDefParseXML (domain_conf.c:11478)
==8260== by 0x4CEB4FE: virDomainDefParseNode (domain_conf.c:12742)
==8260== by 0x4CEB675: virDomainDefParse (domain_conf.c:12684)
==8260== by 0x425958: testCompareXMLToArgvHelper (qemuxml2argvtest.c:107)
==8260== by 0x427111: virtTestRun (testutils.c:138)
==8260== by 0x41D39A: mymain (qemuxml2argvtest.c:451)
==8260== by 0x4277B2: virtTestMain (testutils.c:593)
==8260== by 0x341F421A04: (below main) (libc-start.c:225)
==8260==
When setting up filesystems backed by block devices or file
images, the SELinux mount options must be used to ensure the
correct context is set
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1035336
The basic problem is that during a network update, the required
iptables rules sometimes change, and this was being handled by simply
removing and re-adding the rules. However, the removal of the old
rules was done based on the *new* state of the network, which would
mean that some of the rules would not match those currently in the
system, so the old rules wouldn't be removed.
This patch removes the old rules prior to updating the network
definition then adds the new rules as soon as the definition is
updated. Note that this could lead to a stray packet or two during the
interim, but that was already a problem before (the period of limbo is
now just slightly longer).
While moving the location for the rules, I added a few more sections
that should result in the iptables rules being redone:
DHCP_RANGE and DHCP_HOST - these are needed because adding/removing a dhcp
host entry could lead to the dhcp service being started/stopped, which
would require that the mangle rule that fixes up dhcp response
checksums sould need to be added/removed, and this wasn't being done.
The code for extracting sub-mounts would just do a STRPREFIX
check on the mount. This was flawed because if there were
the following mounts
/etc/aliases
/etc/aliases.db
and '/etc/aliases' was asked for, it would return both even
though the latter isn't a sub-mount.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the code for lxcContainerGetSubtree into the virfile
module creating 2 new functions
int virFileGetMountSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
int virFileGetMountReverseSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
Add a new virfiletest.c test case to validate the new code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When attempting to backport gluster pools to an older versoin
where there is no VIR_STRDUP, I got a crash from calling
strdup(,NULL). Rather than relying on the current else branch
safely doing nothing when there is no fd, it is easier to just
skip it. While at it, there's no need to explicitly set
perms.label to NULL after a VIR_FREE().
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD): Minor optimization.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virsh command 'domxml-to-native' (virConnectDomainXMLToNative())
converts all network devices to "type='ethernet'" in order to make it
more likely that the generated command could be run directly from a
shell (other libvirt network device types end up referencing file
descriptors for tap devices assumed to have been created by libvirt,
which can't be done in this case).
During this conversion, all of the netdev parameters are cleared out,
then specific items are filled in after changing the type. The MAC
address was not one of these preserved items, and the result was that
mac addresses in the generated commandlines were always
00:00:00:00:00:00.
This patch saves the mac address before the conversion, then
repopulates it afterwards, so the proper mac addresses show up in the
commandline.
Signed-off-by: Bing Bu Cao <mars@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
Commit 348b4e2 introduced a potential problem (thankfully not
in any release): we are attempting to use virFileReadHeaderFD()
on a file that was opened with O_NONBLOCK. While this
shouldn't be a problem in practice (because O_NONBLOCK
typically doesn't affect regular or block files, and fifos and
sockets cannot be storage volumes), it's better to play it safe
to avoid races from opening an unexpected file type while also
avoiding problems with having to handle EAGAIN while read()ing.
Based on a report by Dan Berrange.
* src/storage/storage_backend.c
(virStorageBackendVolOpenCheckMode): Fix up fd after avoiding race.
Signed-off-by: Eric Blake <eblake@redhat.com>
Also after commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,
unprivileged user has no rights to umount the mounts that
inherited from parent mountns.
right now, I have no good idea to fix this problem, we need
to do more research. this patch just skip unmounting these
mounts for shared root.
BTW, I think when libvirt lxc enables user namespace, the
configuation that shares root with host is very rara.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
After kernel commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,
unprivileged user has no rights to move the mounts that
inherited from parent mountns. we use this feature to move
the /stateDir/domain-name.{dev, devpts} to the /dev/ and
/dev/pts directroy of container. this commit breaks libvirt lxc.
this patch changes the behavior to bind these mounts when
user namespace is enabled and move these mounts when user
namespace is disabled.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
With some authentication mechanism (PLAIN for example), sasl_client_start()
can return SASL_OK, which translates to virNetSASLSessionClientStart()
returning VIR_NET_SASL_COMPLETE.
cyrus-sasl documentation is a bit vague as to what to do in such situation,
but upstream clarified this a bit in
http://asg.andrew.cmu.edu/archive/message.php?mailbox=archive.cyrus-sasl&msg=10104
When we got VIR_NET_SASL_COMPLETE after virNetSASLSessionClientStart() and
if the remote also tells us that authentication is complete, then we should
end the authentication procedure rather than forcing a call to
virNetSASLSessionClientStep(). Without this patch, when trying to use SASL
PLAIN, I get:
error :authentication failed : Failed to step SASL negotiation: -1
(SASL(-1): generic failure: Unable to find a callback: 32775)
This patch is based on a spice-gtk patch by Dietmar Maurer.
virNetSASLSessionClientStep logs the data that is going to be passed to
sasl_client_step as input data. However, it tries to log it as a string,
while there is no guarantee that this data is going to be nul-terminated.
This leads to this valgrind log:
==20938== Invalid read of size 1
==20938== at 0x8BDB08F: vfprintf (vfprintf.c:1635)
==20938== by 0x8C06DF2: vasprintf (vasprintf.c:62)
==20938== by 0x4CCEDF9: virVasprintfInternal (virstring.c:337)
==20938== by 0x4CA9516: virLogVMessage (virlog.c:842)
==20938== by 0x4CA939A: virLogMessage (virlog.c:778)
==20938== by 0x4E21E0D: virNetSASLSessionClientStep (virnetsaslcontext.c:458)
==20938== by 0x4DE47B8: remoteAuthSASL (remote_driver.c:4136)
==20938== by 0x4DE33AE: remoteAuthenticate (remote_driver.c:3635)
==20938== by 0x4DDBFAA: doRemoteOpen (remote_driver.c:832)
==20938== by 0x4DDC8BA: remoteConnectOpen (remote_driver.c:1027)
==20938== by 0x4D8595F: do_open (libvirt.c:1239)
==20938== by 0x4D863F3: virConnectOpenAuth (libvirt.c:1481)
==20938== by 0x12762B: vshReconnect (virsh.c:337)
==20938== by 0x12C9B0: vshInit (virsh.c:2470)
==20938== by 0x12E9A5: main (virsh.c:3338)
==20938== Address 0xe329ccd is 0 bytes after a block of size 141 alloc'd
==20938== at 0x4A081D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==20938== by 0x8CB91B4: xdr_array (xdr_array.c:94)
==20938== by 0x4E039C2: xdr_remote_auth_sasl_start_ret (remote_protocol.c:3134)
==20938== by 0x4E1F8AA: virNetMessageDecodePayload (virnetmessage.c:405)
==20938== by 0x4E119F5: virNetClientProgramCall (virnetclientprogram.c:377)
==20938== by 0x4DF8141: callFull (remote_driver.c:5794)
==20938== by 0x4DF821A: call (remote_driver.c:5816)
==20938== by 0x4DE46CF: remoteAuthSASL (remote_driver.c:4112)
==20938== by 0x4DE33AE: remoteAuthenticate (remote_driver.c:3635)
==20938== by 0x4DDBFAA: doRemoteOpen (remote_driver.c:832)
==20938== by 0x4DDC8BA: remoteConnectOpen (remote_driver.c:1027)
==20938== by 0x4D8595F: do_open (libvirt.c:1239)
==20938== by 0x4D863F3: virConnectOpenAuth (libvirt.c:1481)
==20938== by 0x12762B: vshReconnect (virsh.c:337)
==20938== by 0x12C9B0: vshInit (virsh.c:2470)
==20938== by 0x12E9A5: main (virsh.c:3338)
The array of sasl_callback_t callbacks which is passed to sasl_client_new()
must be kept alive as long as the created sasl_conn_t object is alive as
cyrus-sasl uses this structure internally for things like logging, so
the memory used for callbacks must only be freed after sasl_dispose() has
been called.
During testing of successful SASL logins with
virsh -c qemu+tls:///system list --all
I've been getting invalid read reports from valgrind
==9237== Invalid read of size 8
==9237== at 0x6E93B6F: _sasl_getcallback (common.c:1745)
==9237== by 0x6E95430: _sasl_log (common.c:1850)
==9237== by 0x16593D87: digestmd5_client_mech_dispose (digestmd5.c:4580)
==9237== by 0x6E91653: client_dispose (client.c:332)
==9237== by 0x6E9476A: sasl_dispose (common.c:851)
==9237== by 0x4E225A1: virNetSASLSessionDispose (virnetsaslcontext.c:678)
==9237== by 0x4CBC551: virObjectUnref (virobject.c:262)
==9237== by 0x4E254D1: virNetSocketDispose (virnetsocket.c:1042)
==9237== by 0x4CBC551: virObjectUnref (virobject.c:262)
==9237== by 0x4E2701C: virNetSocketEventFree (virnetsocket.c:1794)
==9237== by 0x4C965D3: virEventPollCleanupHandles (vireventpoll.c:583)
==9237== by 0x4C96987: virEventPollRunOnce (vireventpoll.c:652)
==9237== by 0x4C94730: virEventRunDefaultImpl (virevent.c:274)
==9237== by 0x12C7BA: vshEventLoop (virsh.c:2407)
==9237== by 0x4CD3D04: virThreadHelper (virthreadpthread.c:161)
==9237== by 0x7DAEF32: start_thread (pthread_create.c:309)
==9237== by 0x8C86EAC: clone (clone.S:111)
==9237== Address 0xe2d61b0 is 0 bytes inside a block of size 168 free'd
==9237== at 0x4A07577: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9237== by 0x4C73827: virFree (viralloc.c:580)
==9237== by 0x4DE4BC7: remoteAuthSASL (remote_driver.c:4219)
==9237== by 0x4DE33D0: remoteAuthenticate (remote_driver.c:3639)
==9237== by 0x4DDBFAA: doRemoteOpen (remote_driver.c:832)
==9237== by 0x4DDC8DC: remoteConnectOpen (remote_driver.c:1031)
==9237== by 0x4D8595F: do_open (libvirt.c:1239)
==9237== by 0x4D863F3: virConnectOpenAuth (libvirt.c:1481)
==9237== by 0x12762B: vshReconnect (virsh.c:337)
==9237== by 0x12C9B0: vshInit (virsh.c:2470)
==9237== by 0x12E9A5: main (virsh.c:3338)
This commit changes virNetSASLSessionNewClient() to take ownership of the SASL
callbacks. Then we can free them in virNetSASLSessionDispose() after the corresponding
sasl_conn_t has been freed.
When testing SASL authentication over TLS with
virsh -c qemu+tls:///system list --all
I got this valgrind trace after entering wrong credentials:
==30540== 26,903 (88 direct, 26,815 indirect) bytes in 1 blocks are definitely lost in loss record 289 of 293
==30540== at 0x4A081D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==30540== by 0x4C7379A: virAllocVar (viralloc.c:558)
==30540== by 0x4CBC178: virObjectNew (virobject.c:190)
==30540== by 0x4CBC329: virObjectLockableNew (virobject.c:216)
==30540== by 0x4E2D003: virNetTLSContextNew (virnettlscontext.c:719)
==30540== by 0x4E2DC3F: virNetTLSContextNewPath (virnettlscontext.c:930)
==30540== by 0x4E2DD5B: virNetTLSContextNewClientPath (virnettlscontext.c:957)
==30540== by 0x4DDB618: doRemoteOpen (remote_driver.c:627)
==30540== by 0x4DDC8BA: remoteConnectOpen (remote_driver.c:1031)
==30540== by 0x4D8595F: do_open (libvirt.c:1239)
==30540== by 0x4D863F3: virConnectOpenAuth (libvirt.c:1481)
==30540== by 0x12762B: vshReconnect (virsh.c:337)
==30540== by 0x12C9B0: vshInit (virsh.c:2470)
==30540== by 0x12E9A5: main (virsh.c:3338)
You'd think I'd learn to actually COMMIT my working tree
between testing that a last-minute fix compiles and pushing.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Typo fix.
Signed-off-by: Eric Blake <eblake@redhat.com>
Putting together pieces from previous patches, it is now possible
for 'virsh vol-dumpxml --pool gluster volname' to report metadata
about a qcow2 file stored on gluster. The backing file is still
treated as raw; to fix that, more patches are needed to make the
storage backing chain analysis recursive rather than halting at
a network protocol name, but that work will not need any further
calls into libgfapi so much as just reusing this code, and that
should be the only code outside of the storage driver that needs
any help from libgfapi. Any additional use of libgfapi within
libvirt should only be needed for implementing storage pool APIs
such as volume creation or resizing, where backing chain analysis
should be unaffected.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterReadHeader): New helper function.
(virStorageBackendGlusterRefreshVol): Probe non-raw files.
Signed-off-by: Eric Blake <eblake@redhat.com>
With this patch, dangling and looping symlinks are silently
ignored, while links to files and directories are treated the
same as the underlying file or directory. This is the same
behavior as both 'directory' and 'netfs' pools.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Treat symlinks similar to
directory and netfs pools.
Signed-off-by: Eric Blake <eblake@redhat.com>
We already had code for handling allocation different than
capacity for sparse files; we just had to wire it up to be
used when inspecting gluster images.
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD): Handle no fd.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Handle sparse files.
Signed-off-by: Eric Blake <eblake@redhat.com>
Take advantage of the previous patch's addition of 'netdir' as
a distinct volume type, to expose rather than silently skip
directories embedded in a gluster pool. Also serves as an XML
validation for the previous patch.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Don't skip directories.
* tests/storagevolxml2xmltest.c (mymain): Add test.
* tests/storagevolxml2xmlin/vol-gluster-dir.xml: New file.
* tests/storagevolxml2xmlout/vol-gluster-dir.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory. But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch. Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).
* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Actually put gfapi to use, by allowing the creation of a gluster
pool. Right now, all volumes are treated as raw and directories
are skipped; further patches will allow peering into files to
allow for qcow2 files and backing chains, and reporting proper
volume allocation. This implementation was tested against Fedora
19's glusterfs 3.4.1; it might be made simpler by requiring a
higher minimum, and/or require more hacks to work with a lower
minimum.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshPool): Initial implementation.
(virStorageBackendGlusterOpen, virStorageBackendGlusterClose)
(virStorageBackendGlusterRefreshVol): New helper functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
We support gluster volumes in domain XML, so we also ought to
support them as a storage pool. Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents. This sets up the framework.
Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.
This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested. A future patch may lower
the minimum. On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].
[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html
* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.
Signed-off-by: Eric Blake <eblake@redhat.com>
I got annoyed at having to use both 'virsh vol-list $pool --details'
AND 'virsh vol-dumpxml $vol $pool' to learn if I had populated
the volume correctly. Since two-thirds of the data present in
virStorageVolGetInfo() already appears in virStorageVolGetXMLDesc(),
this just adds the remaining piece of information, as:
<volume type='...'>
...
</volume>
* docs/formatstorage.html.in: Document new <volume type=...>.
* docs/schemas/storagevol.rng (vol): Add it to RelaxNG.
* src/conf/storage_conf.h (virStorageVolTypeToString): Declare.
* src/conf/storage_conf.c (virStorageVolTargetDefFormat): Output
the metatype.
(virStorageVolDefParseXML): Parse it, for unit tests.
* tests/storagevolxml2xmlout/vol-*.xml: Update tests to match.
Signed-off-by: Eric Blake <eblake@redhat.com>
The bus type IDE being enum Zero, the bus type on pseries system appears as IDE for all the -hda/-cdrom and for disk drives with if="none" type. Pseries platform needs this to appear as SCSI instead of IDE. The ide being not supported, the explicit requests for ide devices will return an error.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
I didn't find any other instances with:
git grep '1\.1\.5'
* src/test/test_driver.c (testDriver): Tweak version info.
Signed-off-by: Eric Blake <eblake@redhat.com>
Makefile.am, vbox_V4_3.c and vbox_driver.c do regular
modifitions to support a new version of APIs.
vbox_tmpl.c basically fixes incompatibilities since 4.2.
The affected incompatibilities of 4.3 are:
* IMachine::Delete() has been renamed to IMachine::deleteConfig()
* IMedium::CreateBaseStorage() now accepts multiple variant values
* IDisplay::GetScreenResolution() now returns the display position
in the guest
* IMachine now has multiple IUSBControllers and IUSBDeviceFilters
handles USB device filters instead of (obsolete) IUSBController
This patch is tested on Mac OS X 10.8.5 and Fedora 19.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
The USB-related code in vboxDomainGetXMLDesc is deeply nested and
difficult to add new code. So flatten it. To do so, the code is
pulled out from vboxDomainGetXMLDesc to make the function short
and to leaverage early return and goto for error handling.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
This nested job is canceled by the first ExitMonitor call (even though
it was not created by the corresponding EnterMonitor call), and
again in qemuMigrationPrepareAny if qemuProcessStart failed.
This can lead to a crash if the vm object was disposed of before calling
qemuDomainRemoveInactive:
0 ..62bc in virClassIsDerivedFrom (klass=0xdeadbeef,
parent=0x7ffce4cdd270) at util/virobject.c:166
1 ..6666 in virObjectIsClass at util/virobject.c:362
2 ..66b4 in virObjectLock at util/virobject.c:314
3 ..477e in virDomainObjListRemove at conf/domain_conf.c:2359
4 ..7a64 in qemuDomainRemoveInactive at qemu/qemu_domain.c:2087
5 ..956c in qemuMigrationPrepareAny at qemu/qemu_migration.c:2469
This was added by commit e4e2822, exposed by 5a4c237 and c7ac251.
https://bugzilla.redhat.com/show_bug.cgi?id=1018267
https://bugzilla.redhat.com/show_bug.cgi?id=744967
If a domain is rebooting and a migrate API is called meanwhile we would
have to transfer the fakeReboot attribute to the destination in order to
prevent domain doing plain shutdown over there. We shouldn't try to do
anything clever about it other than documenting this as a known
limitation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
$ touch /var/lib/libvirt/images/'a<b>c'
$ virsh pool-refresh default
$ virsh vol-dumpxml 'a<b>c' default | head -n2
<volume>
<name>a<b>c</name>
Oops. That's not valid XML. And when we fix the XML
generation, it fails RelaxNG validation.
I'm also tired of seeing <key>(null)</key> in the example
output for volume xml; while we used NULLSTR() to avoid
a NULL deref rather than relying on glibc's printf
extension behavior, it's even better if we avoid the issue
in the first place. But this requires being careful that
we don't invalidate any storage backends that were relying
on key being unassigned during virStoragVolCreateXML[From].
I would have split this into two patches (one for escaping,
one for avoiding <key>(null)</key>), but since they both
end up touching a lot of the same test files, I ended up
merging it into one.
Note that this patch allows pretty much any volume name
that can appear in a directory (excluding . and .. because
those are special), but does nothing to change the current
(unenforced) RelaxNG claim that pool names will consist
only of letters, numbers, _, -, and +. Tightening the C
code to match RelaxNG patterns and/or relaxing the grammar
to match the C code for pool names is a task for another
day (but remember, we DID recently tighten C code for
domain names to exclude a leading '.').
* src/conf/storage_conf.c (virStoragePoolSourceFormat)
(virStoragePoolDefFormat, virStorageVolTargetDefFormat)
(virStorageVolDefFormat): Escape user-controlled strings.
(virStorageVolDefParseXML): Parse key, for use in unit tests.
* src/storage/storage_driver.c (storageVolCreateXML)
(storageVolCreateXMLFrom): Ensure parsed key doesn't confuse
volume creation.
* docs/schemas/basictypes.rng (volName): Relax definition.
* tests/storagepoolxml2xmltest.c (mymain): Test it.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/storagepoolxml2xmlin/pool-dir-naming.xml: New file.
* tests/storagepoolxml2xmlout/pool-dir-naming.xml: Likewise.
* tests/storagevolxml2xmlin/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-*.xml: Fix fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
If a SCSI hostdev is included in an initial domain XML, without a
corresponding controller statement, one is created silently when the
guest is booted.
When hotplugging a SCSI hostdev, a presumption is that the controller
is already present in the domain either from the original XML, or via
an earlier hotplug.
[root@xxxxxxxx ~]# cat disk.xml
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='3' unit='1088438288'/>
</source>
</hostdev>
[root@xxxxxxxx ~]# virsh attach-device guest01 disk.xml
error: Failed to attach device from disk.xml
error: internal error: unable to execute QEMU command 'device_add': Bus 'scsi0.0' not found
Since the infrastructure is in place, we can also create a controller
silently for use by the hotplugged hostdev device.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
For systems without a PCI bus, attaching a SCSI controller fails:
[root@xxxxxxxx ~]# cat controller.xml
<controller type='scsi' model='virtio-scsi' index='0' />
[root@xxxxxxxx ~]# virsh attach-device guest01 controller.xml
error: Failed to attach device from controller.xml
error: XML error: No PCI buses available
A similar problem occurs with the detach of a controller:
[root@xxxxxxxx ~]# virsh detach-device guest01 controller.xml
error: Failed to detach device from controller.xml
error: operation failed: controller scsi:0 not found
The qemuDomainXXtachPciControllerDevice routines made assumptions
that any caller had a PCI bus. These routines now selectively calls
PCI functions where necessary, and assigns the device information
type to one appropriate for the bus in use.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
For attach/detach of controller devices, we rename the functions to
remove 'PCI' from their title. The actual separation of PCI-specific
operations will be handled in the next patch.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
It makes no sense to go forward to get the parent host number of a
HBA, and treat the HBA as a vHBA with trying to delete it.
Signed-off-by: Osier Yang <jyang@redhat.com>
These changes allow the correct virtio-blk-device and virtio-net-device
devices to be used for the 'virt' machine type for armv7 rather than the
PCI virtio devices.
A test case was added to qemuxml2argvtest for this change.
Signed-off-by: Clark Laughlin <clark.laughlin@linaro.org>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/network/bridge_driver.c: Consistently use commas.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/storage/storage_backend_rbd.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/lxc/lxc_container.c: Consistently use commas.
* src/openvz/openvz_driver.c: Likewise.
* src/openvz/openvz_util.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/vbox/vbox_tmpl.c: Consistently use commas.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/util/vircommand.c: Consistently use commas.
* src/util/virlog.c: Likewise.
* src/util/virnetdevbandwidth.c: Likewise.
* src/util/virnetdevmacvlan.c: Likewise.
* src/util/virnetdevvportprofile.c: Likewise.
* src/util/virnetlink.c: Likewise.
* src/util/virpci.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/virusb.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/qemu/qemu_cgroup.c: Consistently use commas.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_monitor.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/libxl/libxl_driver.c: Consistently use commas.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/xenapi/xenapi_utils.c: Likewise.
* src/xenxs/xen_sxpr.c: Likewise.
* src/xenxs/xen_xm.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/conf/capabilities.c: Consistently use commas.
* src/conf/domain_conf.c: Likewise.
* src/conf/network_conf.c: Likewise.
* src/conf/storage_conf.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/nwfilter/nwfilter_ebiptables_driver.c: Consistently use
commas.
* src/nwfilter/nwfilter_gentech_driver.c: Likewise.
* src/nwfilter/nwfilter_learnipaddr.c: Likewise.
* src/conf/nwfilter_conf.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
For a while we're have random failures of 'securityselinuxtest'
which were not at all reproducible. Fortunately we finally
caught a failure with VIR_TEST_DEBUG=1 enabled. This revealed
TEST: securityselinuxtest
1) GenLabel "dynamic unconfined, s0, c0.c1023" ... OK
2) GenLabel "dynamic unconfined, s0, c0.c1023" ... OK
3) GenLabel "dynamic unconfined, s0, c0.c1023" ... OK
4) GenLabel "dynamic virtd, s0, c0.c1023" ... OK
5) GenLabel "dynamic virtd, s0, c0.c10" ... OK
6) GenLabel "dynamic virtd, s2-s3, c0.c1023" ... OK
7) GenLabel "dynamic virtd, missing range" ... Category two 1024 is out of range 0-1023
FAILED
FAIL: securityselinuxtest
And sure enough we had an off-by-1 in the MCS range code when
the current process has no range set. The test suite randomly
allocates 2 categories from 0->1024 so the chances of hitting
this in the test suite were slim indeed :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
All our .pl scripts had the executable bit set, except for one.
Make it consistent (even if we invoke the scripts as an argument
to $(PERL) rather than directly).
* src/check-aclrules.pl: Make executable.
Signed-off-by: Eric Blake <eblake@redhat.com>
On the domain startup, this function is called to dump some info about
the CPUs. At the beginning of the function we check if we aren't running
older qemu which is not exposing the CPUs via 'qom-list'. However, we
are not checking for even older qemus, which throw 'CommandNotFound'
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A USB filter is stored in a hostdev. The original code doesn't
allocate hostdev->info that is expected to be allocated with hostdev.
So use virDomainHostdevDefAlloc() to allocate both as we expect.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Without a 'return 0' in the stub lxcStartFuse() method, the
compiler warns:
lxc/lxc_fuse.c:374: error: control reaches end of non-void function
[-Wreturn-type]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The glibc setxid is supposed to be async signal safe, but
libc developers confirm that it is not. This causes a problem
when libvirt_lxc starts the FUSE thread and then runs clone()
to start the container. If the clone() was done before the
FUSE thread has completely started up, then the container
will hang in setxid after clone().
The fix is to avoid creating any threads until after the
container has been clone()'d. By avoiding any threads in
the parent, the child is no longer required to run in an
async signal safe context, and we thus avoid the glibc
bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Report the error in virPortAllocatorAcquire instead
of doing it in every caller.
The error contains the port range name instead of the intended
use for the port, e.g.:
Unable to find an unused port in range 'display' (65534-65535)
instead of:
Unable to find an unused port for SPICE
This also adds error reporting when the QEMU driver could not
find an unused port for VNC, VNC WebSockets or NBD migration.
The connection pointer in the closeCallback data was never
initialized, making the unref in remoteClientCloseFunc a no-op.
This fixes the following leak in virsh when the daemon closes
the connection unexpectedly:
1,179 (288 direct, 891 indirect) bytes in 1 blocks are
definitely lost in loss record 745 of 792
at 0x4C2A6D0: calloc (in vgpreload_memcheck-amd64-linux.so)
by 0x4E9643D: virAllocVar (viralloc.c:558)
by 0x4ED2425: virObjectNew (virobject.c:190)
by 0x4F675AC: virGetConnect (datatypes.c:116)
by 0x4F6EA06: do_open (libvirt.c:1136)
by 0x4F71017: virConnectOpenAuth (libvirt.c:1481)
by 0x129FFA: vshReconnect (virsh.c:337)
by 0x128310: main (virsh.c:2470)
Noticed while revieweing the patches for qemu's new migration state.
* include/libvirt/libvirt.h.in (_virDomainJobInfo): Fix typo,
grammar.
* src/libvirt.c (virDomainGetJobInfo): Add cross reference.
Signed-off-by: Eric Blake <eblake@redhat.com>
QEMU 1.6.0 introduced new migration status: setup
Libvirt does not expect such string in QMP and refuses to migrate with error
"unexpected migration status in setup"
This patch fixes it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1025108
So far qemuSetupHostdevCGroup was called very early during hotplug, even
before we knew the device we were about to hotplug was actually
available. By calling the function later, we make sure QEMU won't be
allowed to access devices used by other domains.
Another important effect of this change is that hopluging USB devices
specified by vendor and product (but not by their USB address) works
again. This was broken since v1.0.5-171-g7d763ac, when the call to
qemuFindHostdevUSBDevice was moved after the call to
qemuSetupHostdevCGroup, which then used an uninitialized USB address.
https://bugzilla.redhat.com/show_bug.cgi?id=1018267
The aim of virObject refing and urefing is to tell where the object is
to be used and when is no longer needed. Hence any object shouldn't be
used after it has been unrefed, as we might be the last to hold the
reference. The better way is to call virObjectUnref() *after* the last
object usage. In this specific case, the monitor EOF handler was called
after the qemuMonitorIO called virObjectUnref. Not only that @mon was
disposed (which is not used in the handler anyway) but the @mon->vm
which is causing a SIGSEGV:
2013-11-15 10:17:54.425+0000: 20110: error : qemuMonitorIO:688 : internal error: early end of file from monitor: possible problem:
qemu-kvm: -incoming tcp:01.01.01.0:49152: Failed to bind socket: Cannot assign requested address
Program received signal SIGSEGV, Segmentation fault.
qemuProcessHandleMonitorEOF (mon=<optimized out>, vm=0x7fb728004170) at qemu/qemu_process.c:299
299 if (priv->beingDestroyed) {
(gdb) p *priv
Cannot access memory at address 0x0
(gdb) p vm
$1 = (virDomainObj *) 0x7fb728004170
(gdb) p *vm
$2 = {parent = {parent = {magic = 3735928559, refs = 0, klass = 0xdeadbeef}, lock = {lock = {__data = {__lock = 2, __count = 0, __owner = 20110, __nusers = 1, __kind = 0, __spins = 0, __list = {__prev = 0x0,
__next = 0x0}}, __size = "\002\000\000\000\000\000\000\000\216N\000\000\001", '\000' <repeats 26 times>, __align = 2}}}, pid = 0, state = {state = 0, reason = 0}, autostart = 0, persistent = 0,
updated = 0, def = 0x0, newDef = 0x0, snapshots = 0x0, current_snapshot = 0x0, hasManagedSave = false, privateData = 0x0, privateDataFreeFunc = 0x0, taint = 304}
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the qemuProcessReconnectHelper() a new thread that does all the
interesting work is spawned. The rationale is to not block the daemon
startup process in case of unresponsive qemu. However, the thread
handler is a local variable which gets lost once the control goes out of
scope. Hence the thread gets leaked. We can avoid this if the thread
isn't made joinable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The @list->callbacks is an array that is inflated whenever a new event
is added, e.g. via virDomainEventCallbackListAddID(). However, when we
are freeing the array, we free the items within it but forgot to
actually free it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These two chunks had to be part of df4283a55b. But for some unclear
reason, the weren't. Anyway, these two variables are not used anywhere
within function. They're initialized to NULL and then VIR_FREE()-d. And
there's no reason do do two NOPs, right?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When opening a new connection to the driver, nwfilterOpen
only succeeds if the driverState has been allocated.
Move the privilege check in driver initialization before
the state allocation to disable the driver.
This changes the nwfilter-define error from:
error: cannot create config directory (null): Bad address
To:
this function is not supported by the connection driver:
virNWFilterDefineXML
https://bugzilla.redhat.com/show_bug.cgi?id=1029266
ifdef LIBXL_HAVE_DOMAIN_CREATE_RESTORE_PARAMS hides a multi-line body
for a brace-less else. Add braces to ensure proper logic is applied.
Without this fix, new domains cannot be started. Both
libxl_domain_create_new and libxl_domain_create_restore are called when
starting a new domain leading to this error:
libxl: error: libxl.c:324:libxl__domain_rename: domain with name "guest" already exists.
libxl: error: libxl_create.c:800:initiate_domain_create: cannot make domain: -6
The QOM path in qemu that contains the CPUID registers of a running VM
may not be present (introduced in QEMU 1.5).
Since commit d94b781771 we have a regression with QEMU that don't
support reporting of the CPUID register state via the monitor as the
process startup code expects the path to exist.
This patch adds code that checks with the monitor if the requested path
already exists and uses it only in this case.
If the host side of an LXC container console disconnected
and the guest side continued to write data, until the PTY
buffer filled up, the LXC controller would busy wait. It
would repeatedly see POLLHUP from poll() and not disable
the watch.
This was due to some bogus logic detecting blocking
conditions. Upon seeing a POLLHUP we must disable all
reading & writing from the PTY, and setup the epoll to
wake us up again when the connection comes back.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'none' machine type is something only intended for use
by libvirt probing capabilities. It isn't something that
is useful for running real VM instances. As such it should
not be exposed to users in the capabilities.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virQEMUCapsProbeQMPMachineTypes method iterates over machine
types copying them into the qemuCapsPtr object. It only updates
the qemuCaps->nmachinetypes value at the end though. So if OOM
occurs in the middle, the destructor of qemuCapsPtr will not
free the partially initialized machine types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid code duplication between snapshot configuration code that
parses the disk source too we need to split out this code that will be
reused later on.
This patch tries to be code movement, some aspects of this function will
be refactored later.
If the managedsave image is corrupted, e.g. the XML part is, we fail to
parse it and throw an error, e.g.:
error: Failed to start domain jms8
error: XML error: missing security model when using multiple labels
This is okay, as we can't really start the machine and avoid undefined
qemu behaviour. On the other hand, the error message doesn't give a
clue to users what should they do. The consensus here would be to thrown
a warning to logs saying "Hey, you've got a corrupted file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1027096
If there's the following snippet in the domain XML, the domain will be
lost upon the daemon restart (if the domain is started prior restart):
<seclabel type='dynamic' relabel='yes'/>
The problem is, the 'label', 'imagelabel' and 'baselabel' are parsed
whenever the VIR_DOMAIN_XML_INACTIVE is *not* present or the label is
static. The latter is not our case, obviously. So, when libvirtd starts
up, it finds domain state xml and parse it. During parsing, many XML
flags are enabled but VIR_DOMAIN_XML_INACTIVE. Hence, our parser tries
to extract 'label', 'imagelabel' and 'baselabel' from the XML which
fails for model='none'. Err, this model - even though not specified in
XML - can be taken from qemu wide config file: /etc/libvirtd/qemu.conf.
However, in order to know we are dealing with model='none' the code in
question must be moved forward a bit. Then a new check must be
introduced. This is what the first two chunks are doing.
But this alone is not sufficient. The domain state XML won't contain the
model attribute without slight modification. The model should be
inserted into the XML even if equal to 'none' and the state XML is being
generated - what if the origin (the @security_driver variable in
qemu.conf) changes during libvirtd restarts?
At the end, a test to catch this scenario is introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In virDomainRestoreFlags with VIR_DOMAIN_SAVE_BYPASS_CACHE, it risks
slowing restores from NFS, but not saves to NFS.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
This patch moves some code in the qemuDomainAttachSCSIDisk
function. The check for the existence of a PCI address assigned
to the SCSI controller was moved in order to be executed only
when needed. The PCI address of a controller is not necessary
if QEMU_CAPS_DEVICE is supported.
This fixes issues with the hotplug of SCSI disks on pseries guests.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1025397
When virPCIGetVirtualFunctions created the list of an SRIOV Physical
Function's (PF) Virtual Functions (VF), it had assumed that the order
of "virtfn*" links returned by readdir() from the PF's sysfs directory
was already in the correct order. Experience has shown that this is
not always the case - it can be in alphabetical order (which would
e.g. place virtfn11 before virtfn2) or even some seemingly random
order (see the example in the bugzilla report)
This results in 1) incorrect assumptions made by consumers of the
output of the virt_functions list of virsh nodedev-dumpxml, and 2)
setting MAC address and vlan tag on the wrong VF (since libvirt uses
netlink to set mac address and vlan tag, netlink requires the VF#, and
the function virPCIGetVirtualFunctionIndex() returns the wrong index
due to the improperly ordered VF list).
The solution provided by this patch is for virPCIGetVirtualFunctions
to no longer scan the entire device directory in its natural order,
but instead to check for links individually by name "virtfn%d" where
%d starts at 0 and increases with each success. Since VFs are created
contiguously by the kernel, this will guarantee that all VFs are
found, and placed in the arry in the correct order.
One note of use to the uninitiated is that VIR_APPEND_ELEMENT always
either increments *num_virtual_functions or fails, so no this isn't an
endless loop.
(NB: the SRIOV_* defines at the top of virpci.c were removed
because they are unnecessary and/or not used.)
When adding support for Q35 guests, the code to assign a PCI address
to the primary video card was moved into Q35 and i440fx(PIIX3)
specific functions, but no fallback was kept for other machine types
that might have a video card.
This patch remedies that by assigning a PCI address to the primary
video card if it does not have any kind of address. In particular,
this fixes issues with pseries guests.
Signed-off-by: Vitor de Lima <vitor.lima@eldorado.org.br>
Signed-off-by: Laine Stump <laine@laine.org>
When starting a VM the qemu process may filter out some requested
features of a domain as it's not supported either by the host or by
qemu. Libvirt didn't check if this happened which might end up in
changing of the guest ABI when migrating.
The proof of concept implementation adds the check for the recently
introduced kvm_pv_unhalt cpuid feature bit. This feature depends on both
qemu and host kernel support and thus increase the possibility of guest
ABI breakage.
The linux kernel recently added support for paravirtual spinlock
handling to avoid performance regressions on overcomitted hosts. This
feature needs to be turned in the hypervisor so that the guest OS is
notified about the possible support.
This patch adds a new feature "paravirt-spinlock" to the XML and
supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in
qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1008989
Currently we were storing domain feature flags in a bit field as the
they were either enabled or disabled. New features such as paravirtual
spinlocks however can be tri-state as the default option may depend on
hypervisor version.
To allow storing tri-state feature state in the same place instead of
having to declare dedicated variables for each feature this patch
refactors the bit field to an array.
Some of the emulator features are presented in the <features> element in
the domain XML although they are virtual CPUID feature bits when
presented to the guest. To avoid confusing the users with these
features, as they are not configurable via the <cpu> element, this patch
adds an internal array where those can be stored privately instead of
exposing them in the XML.
Additionaly KVM feature bits are added as example usage of this code.
The qemu monitor supports retrieval of actual CPUID bits presented to
the guest using QMP monitor. Add APIs to extract these information and
tests for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The CPUID functions were stored in multiple arrays according to a
specified prefix of those. This made it very hard to add another prefix
to store KVM CPUID features (0x40000000). Instead of hardcoding a third
array this patch changes the approach used:
The code is refactored to use a single array where the CPUID functions
are stored ordered by the cpuid function so that they don't depend on
the specific prefix and don't waste memory. The code is also less
complex using this approach. A trateoff to this is the change from O(N)
complexity to O(N^2) in x86DataAdd and x86DataSubtract. The rest of the
functions were already using O(N^2) algorithms.
vol-clone reports out of memory error with disk type on ppc64.
Currently, wbytes is defined as size_t type (8 bytes), but
args's value in ioctl(fd, args..) in kernel is int (4 bytes).
This makes wbytes 2^32 times larger, causing an out of memory error.
This patch changes size_t to int to synchronize with kernel.
[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/block/ioctl.c?id=5e01dc7b#n363
[2] https://lkml.org/lkml/2013/11/1/620
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since 86d90b3a (yes, my patch; again) we are supporting NBD storage
migration. However, on error recovery path we got the steps reversed.
The correct order is: return NBD port to the virPortAllocator and then
either unlock the vm or remove it from the driver. Not vice versa.
==11192== Invalid write of size 4
==11192== at 0x11488559: qemuMigrationPrepareAny (qemu_migration.c:2459)
==11192== by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192== by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192== by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192== by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
==11192== by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper (remote_dispatch.h:5741)
==11192== by 0x5212127: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
==11192== by 0x5211C86: virNetServerProgramDispatch (virnetserverprogram.c:305)
==11192== by 0x520A8FD: virNetServerProcessMsg (virnetserver.c:165)
==11192== by 0x520A9E1: virNetServerHandleJob (virnetserver.c:186)
==11192== by 0x50DA78F: virThreadPoolWorker (virthreadpool.c:144)
==11192== by 0x50DA11C: virThreadHelper (virthreadpthread.c:161)
==11192== Address 0x1368baa0 is 576 bytes inside a block of size 688 free'd
==11192== at 0x4A07F5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==11192== by 0x5079A2F: virFree (viralloc.c:580)
==11192== by 0x11456C34: qemuDomainObjPrivateFree (qemu_domain.c:267)
==11192== by 0x50F41B4: virDomainObjDispose (domain_conf.c:2034)
==11192== by 0x50C2991: virObjectUnref (virobject.c:262)
==11192== by 0x50F4CFC: virDomainObjListRemove (domain_conf.c:2361)
==11192== by 0x1145C125: qemuDomainRemoveInactive (qemu_domain.c:2087)
==11192== by 0x11488520: qemuMigrationPrepareAny (qemu_migration.c:2456)
==11192== by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192== by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192== by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192== by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
One of my previous patches (c7ac2519b7) did try to fix the issue when
domain dies too soon during migration. However, this clumsy approach was
missing removal of qemuProcessHandleMonitorDestroy resulting in double
unrefing of mon->vm and hence producing the daemon crash:
==11843== Invalid read of size 4
==11843== at 0x50C28C5: virObjectUnref (virobject.c:255)
==11843== by 0x1148F7DB: qemuMonitorDispose (qemu_monitor.c:258)
==11843== by 0x50C2991: virObjectUnref (virobject.c:262)
==11843== by 0x50C2D13: virObjectFreeCallback (virobject.c:388)
==11843== by 0x509C37B: virEventPollCleanupHandles (vireventpoll.c:583)
==11843== by 0x509C711: virEventPollRunOnce (vireventpoll.c:652)
==11843== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==11843== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==11843== by 0x11F368: main (libvirtd.c:1513)
==11843== Address 0x13b88864 is 4 bytes inside a block of size 136 free'd
==11843== at 0x4A07F5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==11843== by 0x5079A2F: virFree (viralloc.c:580)
==11843== by 0x50C29E3: virObjectUnref (virobject.c:270)
==11843== by 0x114770E4: qemuProcessHandleMonitorDestroy (qemu_process.c:1103)
==11843== by 0x1148F7CB: qemuMonitorDispose (qemu_monitor.c:257)
==11843== by 0x50C2991: virObjectUnref (virobject.c:262)
==11843== by 0x50C2D13: virObjectFreeCallback (virobject.c:388)
==11843== by 0x509C37B: virEventPollCleanupHandles (vireventpoll.c:583)
==11843== by 0x509C711: virEventPollRunOnce (vireventpoll.c:652)
==11843== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==11843== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==11843== by 0x11F368: main (libvirtd.c:1513)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far we are checking if qemu supports 'nbd-server-start'. This,
however, makes no sense on the source as nbd-server-* is used on the
destination. On the source the 'drive-mirror' is used instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For some strange reason virDomainDiskSourcePoolDefParse accessed def of
the disk and allocated the pool object in it. To avoid the need to carry
over the disk definition object, refactor this function to return the
allocated object instead.
Commit b0f8546 broke the build on mingw, by exposing code that
had Linux-specific dependencies but which was previously protected
by libnuma ifdef guards:
make[3]: Entering directory `/home/eblake/libvirt-tmp/build/src'
CC libvirt_driver_la-nodeinfo.lo
../../src/nodeinfo.c: In function 'virNodeGetSiblingsList':
../../src/nodeinfo.c:1543:30: error: 'SYSFS_THREAD_SIBLINGS_LIST_LENGTH_MAX' undeclared (first use in this function)
if (virFileReadAll(path, SYSFS_THREAD_SIBLINGS_LIST_LENGTH_MAX, &buf) < 0)
^
../../src/nodeinfo.c:1543:30: note: each undeclared identifier is reported only once for each function it appears in
../../src/nodeinfo.c: In function 'virNodeCapsFillCPUInfo':
../../src/nodeinfo.c:1562:5: error: implicit declaration of function 'virNodeGetCpuValue' [-Werror=implicit-function-declaration]
if ((tmp = virNodeGetCpuValue(SYSFS_CPU_PATH, cpu_id,
^
../../src/nodeinfo.c:1562:5: error: nested extern declaration of 'virNodeGetCpuValue' [-Werror=nested-externs]
../../src/nodeinfo.c:1562:35: error: 'SYSFS_CPU_PATH' undeclared (first use in this function)
if ((tmp = virNodeGetCpuValue(SYSFS_CPU_PATH, cpu_id,
^
cc1: all warnings being treated as errors
* src/nodeinfo.c (virNodeCapsFillCPUInfo): Make conditional.
(virNodeGetSiblingsList): Move into #ifdef linux block.
Signed-off-by: Eric Blake <eblake@redhat.com>
This gets rid of another stat() per volume, as well as cutting
bytes read in half, when populating the volumes of a directory
pool during a pool refresh. Not to mention that it provides an
interface that can let gluster pools also probe file types.
* src/util/virstoragefile.h (virStorageFileProbeFormatFromFD):
Delete.
(virStorageFileProbeFormatFromBuf): New prototype.
(VIR_STORAGE_MAX_HEADER): New constant, based on...
* src/util/virstoragefile.c (STORAGE_MAX_HEAD): ...old name.
(vmdk4GetBackingStore, virStorageFileGetMetadataInternal)
(virStorageFileProbeFormat): Adjust clients.
(virStorageFileProbeFormatFromFD): Delete.
(virStorageFileProbeFormatFromBuf): Export.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Adjust client.
* src/libvirt_private.syms (virstoragefile.h): Adjust exports.
Signed-off-by: Eric Blake <eblake@redhat.com>
Future patches will want to learn metadata about a file using
a buffer that was already parsed in order to probe the file's
format. Rather than reopening and re-reading the file, it makes
sense to separate getting file contents from actually parsing
those contents.
* src/util/virstoragefile.c (virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataFromFDInternal): New functions.
(virStorageFileGetMetadataInternal): Hoist fstat() and read() into
callers.
(virStorageFileGetMetadataFromFD)
(virStorageFileGetMetadataRecurse): Rework clients.
* src/util/virstoragefile.h (virStorageFileGetMetadataFromBuf):
New prototype.
* src/libvirt_private.syms (virstoragefile.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
We are calling fstat() at least twice per storage volume in
a directory storage pool; this is rather wasteful. Refactoring
this is also a step towards making code reusable for gluster,
where gluster can provide struct stat but cannot use fstat().
* src/storage/storage_backend.h
(virStorageBackendVolOpenCheckMode)
(virStorageBackendUpdateVolTargetInfoFD): Update signature.
* src/storage/storage_backend.c
(virStorageBackendVolOpenCheckMode): Pass stat results back.
(virStorageBackendUpdateVolTargetInfoFD): Use existing stats.
(virStorageBackendVolOpen, virStorageBackendUpdateVolTargetInfo):
Update callers.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSIUpdateVolTargetInfo): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathUpdateVolTargetInfo): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Our backing file chain code was not very robust to an ill-timed
EINTR, which could lead to a short read causing us to randomly
treat metadata differently than usual. But the existing
virFileReadLimFD forces an error if we don't read the entire
file, even though we only care about the header of the file.
So add a new virFile function that does what we want.
* src/util/virfile.h (virFileReadHeaderFD): New prototype.
* src/util/virfile.c (virFileReadHeaderFD): New function.
* src/libvirt_private.syms (virfile.h): Export it.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal)
(virStorageFileProbeFormatFromFD): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
'unsigned char *' makes sense if you are doing math on bytes and
don't want to worry about wraparound from a signed 'char'; but
since all we are doing is memcmp() or virReadBufInt*[LB]E(), which
are both safe on either type of char, and since read() prefers to
operate on 'char *', it's simpler to avoid casts by just typing
things as 'char *' from the get-go. [Technically, read can
operate on an 'unsigned char *' thanks to the C rule that any
pointer can be implicitly converted to 'char *' for legacy K&R
compatibility; but where this patch saves us is if we try to use
virfile.h functions that take 'char **' in order to allocate the
buffer, where the compiler would barf on type mismatch.]
* src/util/virstoragefile.c (FileTypeInfo): Avoid unsigned char.
(cowGetBackingStore, qcow2GetBackingStoreFormat)
(qcowXGetBackingStore, qcow1GetBackingStore)
(qcow2GetBackingStore, vmdk4GetBackingStore, qedGetBackingStore)
(virStorageFileMatchesMagic, virStorageFileMatchesVersion)
(virStorageFileProbeFormatFromBuf, qcow2GetFeatures)
(virStorageFileGetMetadataInternal)
(virStorageFileProbeFormatFromFD): Simplify clients.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since the 90139a62 commit the error is copied into mon->lastError but
it's never freed from there.
==31989== 395 bytes in 1 blocks are definitely lost in loss record 877 of 978
==31989== at 0x4A06C2B: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==31989== by 0x7EAF129: strdup (in /lib64/libc-2.15.so)
==31989== by 0x50D586C: virStrdup (virstring.c:554)
==31989== by 0x50976C1: virCopyError (virerror.c:191)
==31989== by 0x5097A35: virCopyLastError (virerror.c:312)
==31989== by 0x114909A9: qemuMonitorIO (qemu_monitor.c:690)
==31989== by 0x509BEDE: virEventPollDispatchHandles (vireventpoll.c:501)
==31989== by 0x509C701: virEventPollRunOnce (vireventpoll.c:648)
==31989== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==31989== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==31989== by 0x11F368: main (libvirtd.c:1513)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there's a migration cancelled, the bitmap of migration port should be
cleaned up too.
Signed-off-by: Zeng Junliang <zengjunliang@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1020135
If networkAllocateActualDevice() had failed due to a pool of hostdev
or direct devices being depleted, the calling function could still
call networkReleaseActualDevice() as part of its cleanup, and that
function would then unconditionally decrement the connections count
for the network, even though it hadn't been incremented (due to
failure of allocate). This *was* necessary because the .actual member
of the netdef was allocated with a "lazy" algorithm, only being
created if there was a need to store data there (e.g. if a device was
allocated from a pool, or bandwidth was allocated for the device), so
there was no simple way for networkReleaseActualDevice() to tell if
something really had been allocated (i.e. if "connections++" had been
executed).
This patch changes networkAllocateDevice() to *always* allocate an
actual device for any netdef of type='network', even if it isn't
needed for any other reason. This has no ill effects anywhere else in
the code (except for using a small amount of memory), and
networkReleaseActualDevice() can then determine if there was a
previous successful allocate by checking for .actual != NULL (if not,
it skips the "connections--").
Needed for architectures that don't use gcc atomic ops but pthread. This
fixes the armel build that otherwise breaks like:
CCLD virt-login-shell
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virClassNew':
/«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:150: undefined reference to `virAtomicLock'
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virObjectNew':
/«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:202: undefined reference to `virAtomicLock'
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virObjectUnref':
/«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:274: undefined reference to `virAtomicLock'
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virObjectRef':
/«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:295: undefined reference to `virAtomicLock'
collect2: error: ld returned 1 exit status
See https://buildd.debian.org/status/fetch.php?pkg=libvirt&arch=armel&ver=1.1.4-1&stamp=1383588268
A qcow2 file with a backing file of 'gluster://host/vol/file' should
not try to look for a directory named './gluster:/' in the file system.
* src/util/virstoragefile.c (virBackingStoreIsFile): Broaden check
to include all protocols.
Signed-off-by: Eric Blake <eblake@redhat.com>
Coverity complains that the call to virPCIDeviceDetach() in
qemuPrepareHostdevPCIDevices() doesn't check status return like
other calls. Seems this just was lurking until a recent change
to this module resulted in Coverity looking harder and finding
the issue. Introduced by 'a4efb2e33' when function was called
'pciReAttachDevice()'
Just added a ignore_value() since it doesn't appear to matter
if the call fails since we're on a failure path already.
Currently the LXC container tries to skip selinux/securityfs
mounts if the directory does not exist in the filesystem,
or if SELinux is disabled.
The former check is flawed because the /sys/fs/selinux
or /sys/kernel/securityfs directories may exist in sysfs
even if the mount type is disabled. Instead of just doing
an access() check, use an virFileIsMounted() to see if
the FS is actually present in the host OS. This also
avoids the need to check is_selinux_enabled().
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some mounts must be skipped if running inside a user namespace,
since the kernel forbids their use. Instead of strcmp'ing the
filesystem type in the body of the loop, set an explicit flag
in the lxcBasicMounts table.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the lxcBasicMounts array has separate entries for
most mounts, to reflect that we must do a separate mount
operation to make mounts read-only. Remove the duplicate
entries and instead set the MS_RDONLY flag against the main
entry. Then change lxcContainerMountBasicFS to look for the
MS_RDONLY flag, mask it out & do a separate bind mount.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'srcpath' variable is initialized from 'mnt->src' and never
changed thereafter. Some places continue to use 'mnt->src' and
others use 'srcpath'. Remove the pointless 'srcpath' variable
and use 'mnt->src' everywhere.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virLXCBasicMountInfo struct contains a 'char *opts'
field passed onto the mount() syscall. Every entry in the
list sets this to NULL though, so it can be removed to
simplify life.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a function for efficiently checking if a path is a filesystem
mount point.
NB will not work for bind mounts, only true filesystem mounts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1018897
If a PCI deivce is not binded to any driver (e.g. there's yet no PCI
driver in the linux kernel) but still users want to passthru the device
we fail the whole operation as we fail to resolve the 'driver' link
under the PCI device sysfs tree. Obviously, this is not a fatal error
and it shouldn't be error at all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Until now the map was loaded from the XML definition file every time a
operation on the flags was requested. With the introduciton of one shot
initializers we can store the definition forever (as it will never
change) instead of parsing it over and over again.
This makes virCPUx86DataAddCPUID, virCPUx86DataFree, and
virCPUx86MakeData available for direct usage outside of cpu driver in
tests and the new qemu monitor that will request the actual CPU
definition from a running qemu instance.
The function was called in a single place only and was reporting errors
that were later ignored. Use the virNumaGetNodeMemory helper to get the
size of the memory in the NUMA node and remove the helper
aa0f099 introduced a strict error checking for getsockopt and it
revealed that getting a peer credential of a socket on FreeBSD
didn't work. Libvirtd hits the error:
error : virNetSocketGetUNIXIdentity:1198 : Failed to get valid
client socket identity groups
SOL_SOCKET (0xffff) was used as a level of getsockopt for
LOCAL_PEERCRED, however, it was wrong. 0 is correct as well as
Mac OS X.
So for LOCAL_PEERCRED our options are SOL_LOCAL (if defined) or
0 on Mac OS X and FreeBSD. According to the fact, the patch
simplifies the code by removing ifdef __APPLE__.
I tested the patch on FreeBSD 8.4, 9.2 and 10.0-BETA1.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
With Mac OS X 10.9, xdrproc_t is no longer defined as:
typedef bool_t (*xdrproc_t)(XDR *, ...);
but instead as:
typdef bool_t (*xdrproc_t)(XDR *, void *, unsigned int);
For reference, Linux systems typically define it as:
typedef bool_t (*xdrproc_t)(XDR *, void *, ...);
The rationale explained in the header is that using a vararg is
incorrect and has a potential to change the ABI slightly do to compiler
optimizations taken and the undefined behavior. They decided
to specify the exact number of parameters and for compatibility with old
code decided to make the signature require 3 arguments. The third
argument is ignored for cases that its not used and its recommended to
supply a 0.
Rather than casting the virBitmap pointer to uint8_t* and then using
the structure contents as a byte array, use the virBitmap API to determine
the bitmap size and test each bit.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
in recently xen commit: 7051d5c8, there is a api changes in
libxl_domain_create_restore.
Author: Andrew Cooper <andrew.cooper3@citrix.com>
Date: Thu Oct 10 12:23:10 2013 +0100
tools/migrate: Fix regression when migrating from older version of Xen
use the macro LIBXL_HAVE_DOMAIN_CREATE_RESTORE_PARAMS in libxl.h
in order to make libvirt could compile with old and new xen.
the params checkpointed_stream is useful if libvirt libxl driver
support migration. for new, set it as zero.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
When starting a transient VM the first thing done is to check
for duplicates. The check looks if there are any running VMs
with the matching name/uuid. It explicitly allows there to
be inactive VMs, so that a persistent VM can be temporarily
booted with a different config.
There is a race condition, however, where 2 or more clients
try to create the same transient VM. The first client will
cause a virDomainObjPtr to be added to the domain list, and
it is inactive at this stage. The second client may then
come along and see this inactive VM, and mistake it for a
persistent VM.
If the first VM fails to start its transient guest for any
reason, then it'll remove the virDomainObjPtr from the list.
The second client now has a virDomainObjPtr that it can try
to boot, which libvirt no longer has a record of. The result
can be a running QEMU process that is orphaned.
It was also, however, possible for the virDomainObjPtr to be
completely free'd which will cause libvirtd to crash in some
scenarios.
The fix is to only allow an existing inactive VM if it is
marked as persistent.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Thie patch fixes the segfault:
error : nodeStateInitialize:658 : DBus not available,
disabling HAL driver: internal error: Unable to get DBus
system bus connection: Failed to connect to socket
/var/run/dbus/system_bus_socket: No such file or directory
error : nodeStateInitialize:719 : ?:
Caught Segmentation violation dumping internal log buffer:
This segfault occurs at the below VIR_ERROR:
failure:
if (dbus_error_is_set(&err)) {
VIR_ERROR(_("%s: %s"), err.name, err.message);
When virDBusGetSystemBus fails, the code jumps to the above failure
path. However, the err variable is not correctly initialized
before calling virDBusGetSystemBus. As a result, dbus_error_is_set
may pass over the uninitialized err variable whose name or
message may point to somewhere unknown memory region, which
causes a segfault on VIR_ERROR.
The new code initializes the err variable before calling
virDBusGetSystemBus.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Include reference of the VM object pointer and name in debug
logs for QEMU start/stop functions. Also make sure we log the
PID that we started, since it isn't available elsewhere in the
logs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In debugging a recent oVirt/libvirt race condition, I was very
frustrated by lack of logging in the job enter/exit code. This
patch adds some key data which would have been useful in by
debugging attempts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Using size_t counts will let us use VIR_APPEND_ELEMENT and friends.
* src/conf/storage_conf.h (_virStoragePoolObjList)
(_virStorageVolDefList): Track list sizes with size_t.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDRefreshPool): Fix type fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
To make it easier to forbid future attempts at a confusing typedef
name ending in Ptr that isn't actually a pointer, insist that we
follow our preferred style of 'typedef foo *fooPtr'.
* cfg.mk (sc_forbid_const_pointer_typedef): Enforce consistent
style, to prevent issue fixed in previous storage patch.
* src/conf/capabilities.h (virCapsPtr): Fix offender.
* src/security/security_stack.c (virSecurityStackItemPtr):
Likewise.
* tests/qemucapabilitiestest.c (testQemuDataPtr): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The following sequence
1. Define a persistent QMEU guest
2. Start the QEMU guest
3. Stop libvirtd
4. Kill the QEMU process
5. Start libvirtd
6. List persistent guests
At the last step, the previously running persistent guest
will be missing. This is because of a race condition in the
QEMU driver startup code. It does
1. Load all VM state files
2. Spawn thread to reconnect to each VM
3. Load all VM config files
Only at the end of step 3, does the 'virDomainObjPtr' get
marked as "persistent". There is therefore a window where
the thread reconnecting to the VM will remove the persistent
VM from the list.
The easy fix is to simply switch the order of steps 2 & 3.
In addition to this though, we must only attempt to reconnect
to a VM which had a non-zero PID loaded from its state file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'error' cleanup block in qemuProcessReconnect() had a
'return' statement in the middle of it. This caused a leak
of virConnectPtr & virQEMUDriverConfigPtr instances. This
was identified because netcf recently started checking its
refcount in libvirtd shutdown:
netcfStateCleanup:109 : internal error: Attempt to close netcf state driver with open connections
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virDomainObjListLoadAllConfigs sets dom->persistent after
having released its lock on the domain object. This exposes
a possible race condition.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To ensure proper processing by virGetUserID() and virGetGroupID()
of a uid/gid add a "+" prior to the uid/gid to denote it's really
a uid/gid for the label.
The rbd code had a confusing typedef ending in Ptr that was not
actually a pointer, which made the rest of the code harder to
read. This fixes things to actually pass by pointer rather than
by copy.
* src/storage/storage_backend_rbd.c (virStorageBackendStatePtr):
Fix typedef.
(virStorageBackendRBDOpenRADOSConn)
(virStorageBackendRBDCloseRADOSConn)
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDRefreshPool, virStorageBackendRBDDeleteVol)
(virStorageBackendRBDCreateVol, virStorageBackendRBDRefreshVol)
(virStorageBackendRBDResizeVol): Fix fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
When adding an automatically allocated port to a well-formed migration
URI, keep it well-formed:
tcp://1.2.3.4/ -> tcp://1.2.3.4/:12345 # wrong
tcp://1.2.3.4/ -> tcp://1.2.3.4:12345/ # fixed
tcp://1.2.3.4 -> tcp://1.2.3.4:12345 # still works
tcp:1.2.3.4 -> tcp:1.2.3.4:12345 # still works (old syntax)
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Expand the "secmodel" XML fragment of "host" with a sequence of
baselabel's which describe the default security context used by
libvirt with a specific security model and virtualization type:
<secmodel>
<model>selinux</model>
<doi>0</doi>
<baselabel type='kvm'>system_u:system_r:svirt_t:s0</baselabel>
<baselabel type='qemu'>system_u:system_r:svirt_tcg_t:s0</baselabel>
</secmodel>
<secmodel>
<model>dac</model>
<doi>0</doi>
<baselabel type='kvm'>107:107</baselabel>
<baselabel type='qemu'>107:107</baselabel>
</secmodel>
"baselabel" is driver-specific information, e.g. in the DAC security
model, it indicates USER_ID:GROUP_ID.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Merge the functions 'virSecurityDACSetUser' and
'virSecurityDACSetGroup' into 'virSecurityDACSetUserAndGroup'.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The lxcContainerSetID() method prints a misleading log
message about setting the uid/gid when no ID map is
present in the XML config. Skip the debug message in
this case.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Commit '922b7fda' resulted in two DEADCODE warnings from Coverity in
remoteDispatchAuthPolkit and virAccessDriverPolkitFormatProcess.
Commit '604ae657' modified the daemon.c code to remove the deadcode
issue, but did not do so for viracessdriverpolkit.c. This just mimics
the same changes
According to the following valgrind output, there seems to be a
invalid limit for the iterator (captured on Fedora 19):
==3945== Invalid read of size 1
==3945== at 0x1E1FA410: libxlVmStart (libxl_driver.c:475)
==3945== by 0x1E1FAD9A: libxlDomainCreateWithFlags (libxl_driver.c:2633)
==3945== by 0x5187D46: virDomainCreate (libvirt.c:9439)
==3945== by 0x13BAA6: remoteDispatchDomainCreateHelper (remote_dispatch.h:2910)
==3945== by 0x51DE5B9: virNetServerProgramDispatch (virnetserverprogram.c:435)
==3945== by 0x51D93E7: virNetServerHandleJob (virnetserver.c:165)
==3945== by 0x50F5BF4: virThreadPoolWorker (virthreadpool.c:144)
==3945== by 0x50F5670: virThreadHelper (virthreadpthread.c:161)
==3945== by 0x8046C52: start_thread (pthread_create.c:308)
==3945== by 0x8758E1C: clone (clone.S:113)
==3945== Address 0x23424d81 is 0 bytes after a block of size 1 alloc'd
==3945== at 0x4A08121: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==3945== by 0x50B1F8C: virAllocN (viralloc.c:189)
==3945== by 0x1E1FA3CA: libxlVmStart (libxl_driver.c:468)
==3945== by 0x1E1FAD9A: libxlDomainCreateWithFlags (libxl_driver.c:2633)
==3945== by 0x5187D46: virDomainCreate (libvirt.c:9439)
==3945== by 0x13BAA6: remoteDispatchDomainCreateHelper (remote_dispatch.h:2910)
==3945== by 0x51DE5B9: virNetServerProgramDispatch (virnetserverprogram.c:435)
==3945== by 0x51D93E7: virNetServerHandleJob (virnetserver.c:165)
==3945== by 0x50F5BF4: virThreadPoolWorker (virthreadpool.c:144)
==3945== by 0x50F5670: virThreadHelper (virthreadpthread.c:161)
==3945== by 0x8046C52: start_thread (pthread_create.c:308)
==3945== by 0x8758E1C: clone (clone.S:113)
==3945==
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1013045
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently, we ignore whether dnsmasqCapsRefresh succeeds or fails. We
shouldn't do that as we may generate wrong dnsmasq command line (what
is done just a few lines below).
Signed-off-by: Hongwei Bi <hwbi2008@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While LOCAL_PEERCRED on the BSDs does not return the pid information of
the peer, Mac OS X 10.8 added LOCAL_PEERPID to retrieve the pid so we
should use that when its available to get that information.
There are still two places where we are using 1bit width unsigned
integer to store a boolean. There's no real need for this and these
occurrences can be replaced with 'bool'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After commit 3e2f27e1, I've noticed build failures of virt-login-shell
when libapparmor-devel is installed on the build host
CCLD virt-login-shell
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-vircommand.o):
In function `virExec':
/home/jfehlig/virt/upstream/libvirt/src/util/vircommand.c:653: undefined
reference to `aa_change_profile'
collect2: error: ld returned 1 exit status
I was about to commit an easy fix under the build-breaker rule
(build-fix-1.patch), but thought to extend the notion of SECDRIVER_LIBS
to SECDRIVER_CFLAGS, and use both throughout src/Makefile.am where it
makes sense (build-fix-2.patch).
Should I just stick with the simple fix, or is something along the lines
of patch 2 preferred?
Regards,
Jim
>From a0f35945f3127ab70d051101037e821b1759b4bb Mon Sep 17 00:00:00 2001
From: Jim Fehlig <jfehlig@suse.com>
Date: Mon, 21 Oct 2013 15:30:02 -0600
Subject: [PATCH] build: fix virt-login-shell build with apparmor
With libapparmor-devel installed, virt-login-shell fails to link
CCLD virt-login-shell
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-vircommand.o): In function `virExec':
/home/jfehlig/virt/upstream/libvirt/src/util/vircommand.c:653: undefined reference to `aa_change_profile'
collect2: error: ld returned 1 exit status
Fix by linking libvirt_setuid_rpc_client with previously determined
SECDRIVER_LIBS in src/Makefile.am. While at it, introduce SECDRIVER_CFLAGS
and use both throughout src/Makefile.am where it makes sense.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
HW_PHYSMEM is available on Mac OS X as well as FreeBSD, however,
its resulting value for Mac OS X is 32 bits. Mac OS X provides
HW_MEMSIZE that is 64 bits version of HW_PHYSMEM. We have to use it.
I tested the patch on Mac OS X 10.6.8, 10.7.4, 10.8.5 and FreeBSD 9.2.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
This patch (and the two patches that precede it) resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=1005682
When libvirt was changed to delay the final cleanup of device removal
until the qemu process had signaled it with a DEVICE_DELETED event for
that device, the hostdev removal function
(qemuDomainRemoveHostDevice()) was written to properly handle the
removal of a hostdev that was actually an SRIOV virtual function
(defined with <interface type='hostdev'>). However, the function used
to search for a device matching the alias name provided in the
DEVICE_DELETED message (virDomainDefFindDevice()) would search through
the list of netdevs before hostdevs, so qemuDomainRemoveHostDevice()
was never called; instead the netdev function,
qemuDomainRemoveNetDevice() (which *doesn't* properly cleanup after
removal of <interface type='hostdev'>), was called.
(As a reminder - each <interface type='hostdev'> results in a
virDomainNetDef which contains a virDomainHostdevDef having a parent
type of VIR_DOMAIN_DEVICE_NET, and parent.data.net pointing back to
the virDomainNetDef; both Defs point to the same device info object
(and the info contains the device's "alias", which is used by qemu to
identify the device). The virDomainHostdevDef is added to the domain's
hostdevs list *and* the virDomainNetDef is added to the domain's nets
list, so searching either list for a particular alias will yield a
positive result.)
This function modifies the qemuDomainRemoveNetDevice() to short
circuit itself and call qemu DomainRemoveHostDevice() instead when the
actual device is a VIR_DOMAIN_NET_TYPE_HOSTDEV (similar logic to what
is done in the higher level qemuDomainDetachNetDevice())
Note that even if virDomainDefFindDevice() changes in the future so
that it finds the hostdev entry first, the current code will continue
to work properly.
This function was called in three places, and in each the call was
qualified by a slightly different conditional. In reality, this
function should only be called for a hostdev if all of the following
are true:
1) mode='subsystem'
2) type='pci'
3) there is a parent device definition which is an <interface>
(VIR_DOMAIN_DEVICE_NET)
We can simplify the callers and make them more consistent by checking
these conditions at the top ov qemuDomainHostdevNetConfigRestore and
returning 0 if one of them isn't satisfied.
The location of the call to qemuDomainHostdevNetConfigRestore() has
also been changed in the hot-plug case - it is moved into the caller
of its previous location (i.e. from qemuDomainRemovePCIHostDevice() to
qemuDomainRemoveHostDevice()). This was done to be more consistent
about which functions pay attention to whether or not this is one of
the special <interface> hostdevs or just a normal hostdev -
qemuDomainRemoveHostDevice() already contained a call to
networkReleaseActualDevice() and virDomainNetDefFree(), so it makes
sense for it to also handle the resetting of the device's MAC address
and vlan tag (which is what's done by
qemuDomainHostdevNetConfigRestore()).
Avoid people introducing security flaws in their apps by
forbidding the use of libvirt.so in setuid programs, with
a check in virInitialize.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We already have stubs for getuid, geteuid, getgid but
not for getegid. Something in gnulib already does a
check for it during configure, so we already have the
HAVE_GETEGID macro defined.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We don't want setuid programs automatically spawning libvirtd,
so disable any use of autostart when setuid.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We don't know enough about quality of external libraries used
for non-UNIX transports, nor do we want to spawn external
commands when setuid. Restrict to the bare minimum which is
UNIX transport for local usage. Users shouldn't need to be
running setuid if connecting to remote hypervisors in any
case.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The use of getenv is typically insecure, and we want people
to use our wrappers, to force them to think about setuid
needs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
virCommandAddEnvPassAllowSUID
virCommandAddEnvPassBlockSUID
And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libvirt.so library has far too many library deps to allow
linking against it from setuid programs. Those libraries can
do stuff in __attribute__((constructor) functions which is
not setuid safe.
The virt-login-shell needs to link directly against individual
files that it uses, with all library deps turned off except
for libxml2 and libselinux.
Create a libvirt-setuid-rpc-client.la library which is linked
to by virt-login-shell. A config-post.h file allows this library
to disable all external deps except libselinux and libxml2.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We must not allow file/syslog/journald log outputs when running
setuid since they can be abused to do bad things. In particular
the 'file' output can be used to overwrite files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Care must be taken accessing env variables when running
setuid. Introduce a virGetEnvAllowSUID for env vars which
are safe to use in a setuid environment, and another
virGetEnvBlockSUID for vars which are not safe. Also add
a virIsSUID helper method for any other non-env var code
to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virConnectDomainXMLToNative API should require 'connect:write'
not 'connect:read', since it will trigger execution of the QEMU
binaries listed in the XML.
Also make virConnectDomainXMLFromNative API require a full
read-write connection and 'connect:write' permission. Although the
current impl doesn't trigger execution of QEMU, we should not
rely on that impl detail from an API permissioning POV.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit e3ef20d7 allows user to configure migration ports range via
qemu.conf. However, it forgot to update augeas definition file and
even the test data was malicious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1019053
When we migrate vms concurrently, there's a chance that libvirtd on
destination assigns the same port for different migrations, which will
lead to migration failure during prepare phase on destination. So we use
virPortAllocator here to solve the problem.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In fact, the suffix should be _QUIET not _QUIT to stress the
fact, that no OOM error is reported on error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
netcfStateInitialize() initializes the driverState variable,
and when netcfStateCleanup is called, it will call virReportError()
if driverState is NULL.
This is not consistent with what other state objects are doing,
they return -1 without reporting an error in such cases.
See also
https://www.redhat.com/archives/libvir-list/2013-October/msg00809.html:
On Thu, Oct 17, 2013 at 01:40:19PM +0100, Daniel P. Berrange wrote:
> We don't want virStateCleanup to skip execution if virStateInitialize
> has failed though - every callback in virStateCleanup should be written
> to be safe if its corresponding init function hasn't run.
Introduced by 7b87a3
When I quit the process which only register VIR_DOMAIN_EVENT_ID_REBOOT,
I got error like:
"libvirt: XML-RPC error : internal error: domain event 0 not registered".
Then I add the following code, it fixed.
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The header definition didn't match the function declaration, so adjusted
header to reflect the definition.
Found during a Coverity build where STATIC_ANALYSIS is enabled resulting
in the internal.h adding __nonnull__ handling to arguments.
Commit '6d264c91' added support for the qemuMonitorJSONDrivePivot() and
commit 'fbc3adc9' added a corresponding test which ended up triggering
the build failure which I didn't notice until today!
Code cleanup: remove explicit NULL comparisons like ptr == NULL and
ptr != NULL from the ESX code, replacing them with the simpler ptr
and !ptr.
Part three of three.
Code cleanup: remove explicit NULL comparisons like ptr == NULL and
ptr != NULL from the ESX code, replacing them with the simpler ptr
and !ptr.
Part two of three.
Code cleanup: remove explicit NULL comparisons like ptr == NULL and
ptr != NULL from the ESX code, replacing them with the simpler ptr
and !ptr.
Part one of three.
QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The last argument of memmove is the amount of bytes to be moved. The
amount is in Bytes. We are moving some void pointers around. However,
since sizeof(void *) is not Byte on any architecture, we've got the
arithmetic wrong.
This patch improves the error checking in the LOCAL_PEERCRED version
of virNetSocketGetUNIXIdentity, used by FreeBSD and Mac OSX.
1. The error return paths now correctly unlock the socket. This is
implemented in exactly the same way as the SO_PEERCRED version,
using "goto cleanup"
2. cr.cr_ngroups is initialised to -1, and cr.cr_ngroups is checked
for negative and overlarge values.
This means that if the getsockopt() call returns success but doesn't
actually update the xucred structure, this is now caught. This
happened previously when getsockopt was called with SOL_SOCKET
instead of SOL_LOCAL, prior to commit 5a468b3, and resulted in
random uids being accepted.
Signed-off-by: Eric Blake <eblake@redhat.com>
<...>
/* Size of message length field. Not counted in VIR_NET_MESSAGE_MAX
* and VIR_NET_MESSAGE_INITIAL.
*/
const VIR_NET_MESSAGE_LEN_MAX = 4;
</...>
However, msg->bufferLength includes the length word. The wrong checking
was introduced by commit e914dcfd.
* src/rpc/virnetmessage.c:
- Correct the checking in virNetMessageEncodePayloadRaw
- Use a new variable to track the new payload length in
virNetMessageEncodePayloadRaw
The recent patch series proposing the addition of PPC little endian
arch support to Linux defines new arch names 'ppcle' and 'ppc64le':
https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-August/109908.html
This just makes libvirt know about these arch names, so it doesn't
immediately trip up if it seems these new names from uname.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A typo in the setup of NBD backed filesystems meant the
/dev/nbdN device would not be added to the cgroups device
ACL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement the bare minimal sysinfo for AArch64 platforms by
reading the CPU models from /proc/cpuinfo.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
CPU "parser" for AArch64.
Showing cputopology in arm64 linux is work-in-progress so for now
all AArch64 cpus belong to same socket (like PPC).
Also we parse BogoMIPS same like arm 32bit.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Adding AArch64(ARMv8 64bit) to the current list of valid architectures.
For now, AArch64 name would imply AArch64 LE mode only. In future,
we might have separate names for AArch64 LE and BE.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
This should resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=924672
For BZ 924672 the problem stems from the fact that thin pool logical
volume devices show up in /sbin/lvs output just like normal logical
volumes do. Libvirt incorrectly assumes they are just normal logical
volumes and that they will have a corresponding /dev/vgname/lvname
device that has been created by udev and tries to use this device.
To illustrate here is an example of the /dev/vgname/ directory and
the lvs output for a normal lv, thin lv, and thin pool:
LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert
lv vgguests -wi-a---- 1.00g
pool vgguests twi-a-tz- 11.00g 0.00
thinlv vgguests Vwi-a-tz- 1.00g pool 0.00
total 0
lrwxrwxrwx. 1 root root 7 Oct 8 19:35 lv -> ../dm-7
lrwxrwxrwx. 1 root root 7 Oct 8 19:37 thinlv -> ../dm-6
This patch modifies virStorageBackendLogicalMakeVol() to ignore thin pool
devices.
Some ancient gcc fails to see the variables are initialized in a
separate function and a false positive is produced:
cc1: warnings being treated as errors
conf/domain_conf.c: In function 'virDomainChrGetDomainPtrs':
conf/domain_conf.c:10342: error: 'arrVar' may be used uninitialized in this function [-Wuninitialized]
conf/domain_conf.c:10343: error: 'cntVar' may be used uninitialized in this function [-Wuninitialized]
conf/domain_conf.c: In function 'virDomainChrInsert':
conf/domain_conf.c:10362: error: 'arrPtr' may be used uninitialized in this function [-Wuninitialized]
conf/domain_conf.c:10363: error: 'cntPtr' may be used uninitialized in this function [-Wuninitialized]
conf/domain_conf.c: In function 'virDomainChrRemove':
conf/domain_conf.c:10374: error: 'arrPtr' may be used uninitialized in this function [-Wuninitialized]
conf/domain_conf.c:10375: error: 'cntPtr' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds cpuDataFormat and cpuDataParse APIs to be used in unit
tests for testing APIs that deal with virCPUData. In the x86 world, this
means we can now store/load arbitrary CPUID data in the test suite to
check correctness of CPU related APIs that could not be tested before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The range of valid values for cgroup tunables has
changed in the past and may change again in future
kernels. Avoid hardcoding range checks in libvirt
code, delegating range checking to the kernel itself.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
When EINVAL is returned while changing a cgroups value, tell
user that what values are invalid for the field.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
VirtualBox has 'saved' state for VMs saved by the hypervisor.
However, the state is treated as VIR_DOMAIN_NOSTATE by the vbox
driver, resulting that virsh shows 'no state' for saved VMs.
The fix treats the state as VIR_DOMAIN_SHUTOFF as same as
other domains such as qemu.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
The code for converting between virtualbox API states
and libvirt states was duplicated in two places. Pull
the code out into a shared helper method.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
The vmx file parsing code was reporting errors when parsing floppy.fileName
entries if the filename didn't end in .flp. There is no such restriction in
ESX; even using the GUI to configure floppy filenames you can specify any
arbitrary file with any extension.
Fix by changing the vmx parsing code so that it uses the floppy.fileType
value to determine whether floppy.fileName refers to a block device or a
regular file.
Also remove code that would have generated an error if no floppy.fileName
was specified. This is not an error either.
Updated the floppy tests in vmx2xmltest.c and xml2vmxtest.c.
In commit d24677090f the header of one of
the post parse callbacks was changed, but the function used as the
callback in the xenapi driver wasn't adapted. This resulted into:
CC xenapi/libvirt_driver_xenapi_la-xenapi_utils.lo
xenapi/xenapi_driver.c:63:5: error: initialization from incompatible pointer type [-Werror]
xenapi/xenapi_driver.c:63:5: error: (near initialization for 'xenapiDomainDefParserConfig.devicesPostParseCallback') [-Werror]
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up all remaining offenders.
* src/lxc/lxc_process.c (virLXCProcessSetupInterfaceBridged): Drop
needless const.
* src/uml/uml_driver.c (umlMonitorCommand): Use intended type.
(umlMonitorAddress): Fix fallout.
* src/xen/xm_internal.c (xenXMDomainSearchForUUID): Use intended type.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/qemu.
* src/qemu/qemu_bridge_filter.h (networkAllowMacOnPort)
(networkDisallowMacOnPort): Use intended type.
* src/qemu/qemu_bridge_filter.c (networkAllowMacOnPort)
(networkDisallowMacOnPort): Likewise.
* src/qemu/qemu_command.c (qemuBuildTPMBackendStr)
(qemuBuildTPMDevStr, qemuBuildCpuArgStr)
(qemuBuildObsoleteAccelArg, qemuBuildMachineArgStr)
(qemuBuildSmpArgStr, qemuBuildNumaArgStr): Likewise.
* src/qemu/qemu_conf.c (qemuSharedDeviceEntryCopy): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSaveImageStartVM): Likewise.
* src/qemu/qemu_hostdev.c
(qemuDomainHostdevNetConfigVirtPortProfile): Likewise.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONAttachCharDevCommand): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/security.
* src/security/security_apparmor.c (reload_profile)
(AppArmorSetSecurityHostdevLabelHelper)
(AppArmorReleaseSecurityLabel, AppArmorRestoreSecurityAllLabel)
(AppArmorSetSecurityProcessLabel)
(AppArmorSetSecurityChildProcessLabel)
(AppArmorSetSecurityImageLabel, AppArmorSecurityVerify)
(AppArmorSetSecurityHostdevLabel)
(AppArmorRestoreSecurityHostdevLabel, AppArmorSetFDLabel): Drop
needless const.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up remaining offenders in src/conf, and their fallout.
* src/conf/snapshot_conf.h (virDomainSnapshotAssignDef)
(virDomainSnapshotFindByName): Drop attempt at const.
* src/conf/interface_conf.h (virInterfaceObjIsActive)
(virInterfaceDefFormat): Use intended type.
(virInterfaceFindByMACString, virInterfaceFindByName)
(virInterfaceAssignDef, virInterfaceRemove): Drop attempt at
const.
* src/conf/network_conf.h (virNetworkObjIsActive)
(virNetworkDefFormat, virNetworkDefForwardIf)
(virNetworkDefGetIpByIndex, virNetworkIpDefPrefix)
(virNetworkIpDefNetmask): Use intended type.
(virNetworkFindByUUID, virNetworkFindByName, virNetworkAssignDef)
(virNetworkObjAssignDef, virNetworkRemoveInactive)
(virNetworkBridgeInUse, virNetworkSetBridgeName)
(virNetworkAllocateBridge): Drop attempt at const.
* src/conf/netdev_vlan_conf.h (virNetDevVlanFormat): Make
const-correct.
* src/conf/node_device_conf.h (virNodeDeviceHasCap)
(virNodeDeviceDefFormat): Use intended type.
(virNodeDeviceFindByName, virNodeDeviceFindBySysfsPath)
(virNodeDeviceAssignDef, virNodeDeviceObjRemove)
(virNodeDeviceGetParentHost): Drop attempt at const.
* src/conf/secret_conf.h (virSecretDefFormat): Use intended type.
* src/conf/snapshot_conf.c (virDomainSnapshotAssignDef)
(virDomainSnapshotFindByName): Fix fallout.
* src/conf/interface_conf.c (virInterfaceBridgeDefFormat)
(virInterfaceBondDefFormat, virInterfaceVlanDefFormat)
(virInterfaceProtocolDefFormat, virInterfaceDefDevFormat)
(virInterfaceDefFormat, virInterfaceFindByMACString)
(virInterfaceFindByName, virInterfaceAssignDef)
(virInterfaceRemove): Likewise.
* src/conf/network_conf.c
(VIR_ENUM_IMPL, virNetworkFindByName, virNetworkObjAssignDef)
(virNetworkAssignDef, virNetworkRemoveInactive)
(virNetworkDefGetIpByIndex, virNetworkIpDefPrefix)
(virNetworkIpDefNetmask, virNetworkDHCPHostDefParseXML)
(virNetworkIpDefFormat, virNetworkRouteDefFormat)
(virPortGroupDefFormat, virNetworkForwardNatDefFormat)
(virNetworkDefFormatInternal, virNetworkBridgeInUse)
(virNetworkAllocateBridge, virNetworkSetBridgeName)
(virNetworkDNSDefFormat, virNetworkDefFormat): Likewise.
* src/conf/netdev_vlan_conf.c (virNetDevVlanFormat): Likewise.
* src/conf/node_device_conf.c (virNodeDeviceHasCap)
(virNodeDeviceFindBySysfsPath, virNodeDeviceFindByName)
(virNodeDeviceAssignDef, virNodeDeviceObjRemove)
(virNodeDeviceDefFormat, virNodeDeviceGetParentHost): Likewise.
* src/conf/secret_conf.c (virSecretDefFormatUsage)
(virSecretDefFormat): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/conf/domain_conf, and their fallout.
Several things to note: virObjectLock() requires a non-const
argument; if this were C++, we could treat the locking field
as 'mutable' and allow locking an otherwise 'const' object, but
that is a more invasive change, so I instead dropped attempts
to be const-correct on domain lookup. virXMLPropString and
friends require a non-const xmlNodePtr - this is because libxml2
is not a const-correct library. We could make the src/util/virxml
wrappers cast away const, but I figured it was easier to not
try to mark xmlNodePtr as const. Finally, virDomainDeviceDefCopy
was a rather hard conversion - it calls virDomainDeviceDefPostParse,
which in turn in the xen driver was actually modifying the domain
outside of the current device being visited. We should not be
adding a device on the first per-device callback, but waiting until
after all per-device callbacks are complete.
* src/conf/domain_conf.h (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainObjAssignDef, virDomainObjListAdd): Drop attempt at
const.
(virDomainDeviceDefCopy): Use intended type.
(virDomainDeviceDefParse, virDomainDeviceDefPostParseCallback)
(virDomainVideoDefaultType, virDomainVideoDefaultRAM)
(virDomainChrGetDomainPtrs): Make const-correct.
* src/conf/domain_conf.c (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainDeviceDefCopy, virDomainObjListAdd)
(virDomainObjAssignDef, virDomainHostdevSubsysUsbDefParseXML)
(virDomainHostdevSubsysPciOrigStatesDefParseXML)
(virDomainHostdevSubsysPciDefParseXML)
(virDomainHostdevSubsysScsiDefParseXML)
(virDomainControllerModelTypeFromString)
(virDomainTPMDefParseXML, virDomainTimerDefParseXML)
(virDomainSoundCodecDefParseXML, virDomainSoundDefParseXML)
(virDomainWatchdogDefParseXML, virDomainRNGDefParseXML)
(virDomainMemballoonDefParseXML, virDomainNVRAMDefParseXML)
(virSysinfoParseXML, virDomainVideoAccelDefParseXML)
(virDomainVideoDefParseXML, virDomainHostdevDefParseXML)
(virDomainRedirdevDefParseXML)
(virDomainRedirFilterUsbDevDefParseXML)
(virDomainRedirFilterDefParseXML, virDomainIdMapEntrySort)
(virDomainIdmapDefParseXML, virDomainVcpuPinDefParseXML)
(virDiskNameToBusDeviceIndex, virDomainDeviceDefCopy)
(virDomainVideoDefaultType, virDomainHostdevAssignAddress)
(virDomainDeviceDefPostParseInternal, virDomainDeviceDefPostParse)
(virDomainChrGetDomainPtrs, virDomainControllerSCSINextUnit)
(virDomainSCSIDriveAddressIsUsed)
(virDomainDriveAddressIsUsedByDisk)
(virDomainDriveAddressIsUsedByHostdev): Fix fallout.
* src/openvz/openvz_driver.c (openvzDomainDeviceDefPostParse):
Likewise.
* src/libxl/libxl_domain.c (libxlDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainDefaultNetModel): Likewise.
* src/lxc/lxc_domain.c (virLXCDomainDeviceDefPostParse):
Likewise.
* src/uml/uml_driver.c (umlDomainDeviceDefPostParse): Likewise.
* src/xen/xen_driver.c (xenDomainDeviceDefPostParse): Split...
(xenDomainDefPostParse): ...since per-device callback is not the
time to be adding a device.
Signed-off-by: Eric Blake <eblake@redhat.com>
virDomainChrGetDomainPtrs() required 4 levels of pointers (taking
a parameter that will be used as an output variable to return the
address of another variable that contains an array of pointers).
This is rather complex to reason about, especially when outside
of the domain_conf file, no other caller should be modifying
the resulting array of pointers directly. Changing the public
signature gives something is easier to reason with, and actually
make const-correct; which is important as it was the only function
that was blocking virDomainDeviceDefCopy from treating its source
as const.
* src/conf/domain_conf.h (virDomainChrGetDomainPtrs): Use simpler
types, and make const-correct for external users.
* src/conf/domain_conf.c (virDomainChrGetDomainPtrs): Split...
(virDomainChrGetDomainPtrsInternal): ...into an internal version
that lets us modify terms, vs. external form that is read-only.
(virDomainDeviceDefPostParseInternal, virDomainChrFind)
(virDomainChrInsert): Adjust callers.
* src/qemu/qemu_command.c (qemuGetNextChrDevIndex): Adjust caller.
(qemuDomainDeviceAliasIndex): Make const-correct.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in nwfilter code.
This patch does nothing about the stupidity evident in having
__virNWFilterInstantiateFilter, _virNWFilterInstantiateFilter,
and virNWFilterInstantiateFilter, which differ only by leading
underscores, and which infringes on the namespace reserved to
the implementation - that would need to be a separate cleanup.
* src/nwfilter/nwfilter_dhcpsnoop.h (virNWFilterDHCPSnoopReq): Use
intended type.
* src/nwfilter/nwfilter_gentech_driver.h
(virNWFilterInstantiateFilter)
(virNWFilterUpdateInstantiateFilter)
(virNWFilterInstantiataeFilterLate, virNWFilterTeardownFilter)
(virNWFilterCreateVarHashmap): Likewise.
* src/nwfilter/nwfilter_learnipaddr.h (virNWFilterLearnIPAddress):
Likewise.
* src/conf/nwfilter_conf.h (virNWFilterApplyBasicRules)
(virNWFilterApplyDHCPOnlyRules): Likewise.
(virNWFilterDefFormat): Make const-correct.
* src/conf/nwfilter_params.h (virNWFilterVarValueCopy)
(virNWFilterVarValueGetSimple, virNWFilterVarValueGetCardinality)
(virNWFilterVarValueEqual, virNWFilterVarAccessEqual)
(virNWFilterVarAccessGetVarName, virNWFilterVarAccessGetType)
(virNWFilterVarAccessGetIterId, virNWFilterVarAccessGetIndex)
(virNWFilterVarAccessIsAvailable)
(virNWFilterVarCombIterGetVarValue): Use intended type.
(virNWFilterVarValueGetNthValue): Make const-correct.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel)
(virNWFilterSnoopIFKeyFMT, virNWFilterDHCPSnoopReq)
(virNWFilterSnoopPruneIter, virNWFilterSnoopRemAllReqIter)
(virNWFilterDHCPSnoopReq): Fix fallout.
* src/nwfilter/nwfilter_gentech_driver.c
(virNWFilterVarHashmapAddStdValues, virNWFilterCreateVarHashmap)
(virNWFilterInstantiate, __virNWFilterInstantiateFilter)
(_virNWFilterInstantiateFilter, virNWFilterInstantiateFilterLate)
(virNWFilterInstantiateFilter)
(virNWFilterUpdateInstantiateFilter)
(virNWFilterRollbackUpdateFilter, virNWFilterTeardownFilter):
Likewise.
* src/nwfilter/nwfilter_learnipaddr.c (virNWFilterLearnIPAddress):
Likewise.
* src/conf/nwfilter_params.c (virNWFilterVarValueCopy)
(virNWFilterVarValueGetSimple)
(virNWFilterVarValueGetCardinality, virNWFilterVarValueEqual)
(virNWFilterVarCombIterAddVariable)
(virNWFilterVarCombIterGetVarValue, virNWFilterVarValueCompare)
(virNWFilterFormatParamAttributes, virNWFilterVarAccessEqual)
(virNWFilterVarAccessGetVarName, virNWFilterVarAccessGetType)
(virNWFilterVarAccessGetIterId, virNWFilterVarAccessGetIndex)
(virNWFilterVarAccessGetIntIterId)
(virNWFilterVarAccessIsAvailable)
(virNWFilterVarValueGetNthValue): Likewise.
* src/nwfilter/nwfilter_ebiptables_driver.c (ebtablesApplyBasicRules)
(ebtablesApplyDHCPOnlyRules, ebiptablesRuleOrderSort)
(ebiptablesRuleOrderSortPtr): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterDefEqual)
(virNWFilterDefFormat): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/cpu.
* src/cpu/cpu.h (cpuArchDecode, cpuArchEncode, cpuArchUpdate)
(cpuArchHasFeature, cpuDecode, cpuEncode, cpuUpdate)
(cpuHasFeature): Use intended type.
* src/conf/cpu_conf.h (virCPUDefCopyModel, virCPUDefCopy):
Likewise.
(virCPUDefParseXML): Drop const.
* src/cpu/cpu.c (cpuDecode, cpuEncode, cpuUpdate, cpuHasFeature):
Fix fallout.
* src/cpu/cpu_x86.c (x86ModelFromCPU, x86ModelSubtractCPU)
(x86DecodeCPUData, x86EncodePolicy, x86Encode, x86UpdateCustom)
(x86UpdateHostModel, x86Update, x86HasFeature): Likewise.
* src/cpu/cpu_s390.c (s390Decode): Likewise.
* src/cpu/cpu_arm.c (ArmDecode): Likewise.
* src/cpu/cpu_powerpc.c (ppcModelFromCPU, ppcCompute, ppcDecode)
(ppcUpdate): Likewise.
* src/conf/cpu_conf.c (virCPUDefCopyModel, virCPUDefCopy)
(virCPUDefParseXML): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/util outside of the virnet namespace.
Also, make a few virSocketAddr functions const-correct, for easier
conversions in future patches.
* src/util/virbuffer.h (virBufferError, virBufferUse)
(virBufferGetIndent): Use intended type.
* src/util/virmacaddr.h (virMacAddrCmp, virMacAddrCmpRaw)
(virMacAddrSet, virMcAddrFormat, virMacAddrIsUnicast)
(virMacAddrIsMulticast): Likewise.
* src/util/virebtables.h (ebtablesAddForwardAllowIn)
(ebtablesRemoveForwardAllowIn): Likewise.
* src/util/virsocketaddr.h (virSocketAddrSetIPv4Addr): Drop
incorrect const.
(virMacAddrGetRaw, virSocketAddrFormat, virSocketAddrFormatFull):
Make const-correct.
(virSocketAddrMask, virSocketAddrMaskByPrefix)
(virSocketAddrBroadcast, virSocketAddrBroadcastByPrefix)
(virSocketAddrGetNumNetmaskBits, virSocketAddrGetIpPrefix)
(virSocketAddrEqual, virSocketAddrIsPrivate)
(virSocketAddrIsWildcard): Use intended type.
* src/util/virbuffer.c (virBufferError, virBufferUse)
(virBufferGetIndent): Fix fallout.
* src/util/virmacaddr.c (virMacAddrCmp, virMacAddrCmpRaw)
(virMacAddrSet, virMcAddrFormat, virMacAddrIsUnicast)
(virMacAddrIsMulticast): Likewise.
* src/util/virebtables.c (ebtablesAddForwardAllowIn)
(ebtablesRemoveForwardAllowIn): Likewise.
* src/util/virsocketaddr.c (virSocketAddrMask, virMacAddrGetRaw)
(virSocketAddrMaskByPrefix, virSocketAddrBroadcast)
(virSocketAddrBroadcastByPrefix, virSocketAddrGetNumNetmaskBits)
(virSocketAddrGetIpPrefix, virSocketAddrEqual)
(virSocketAddrIsPrivate, virSocketAddrIsWildcard)
(virSocketAddrGetIPv4Addr, virSocketAddrGetIPv6Addr)
(virSocketAddrFormat, virSocketAddrFormatFull): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up virhash to provide a const-correct interface: all actions
that don't modify the table take a const table. Note that in
one case (virHashSearch), we actually strip const away - we aren't
modifying the contents of the table, so much as associated data
for ensuring that the code uses the table correctly (if this were
C++, it would be a case for the 'mutable' keyword).
* src/util/virhash.h (virHashKeyComparator, virHashEqual): Use
intended type.
(virHashSize, virHashTableSize, virHashLookup, virHashSearch):
Make const-correct.
* src/util/virhash.c (virHashEqualData, virHashEqual)
(virHashLookup, virHashSize, virHashTableSize, virHashSearch)
(virHashComputeKey): Fix fallout.
* src/conf/nwfilter_params.c
(virNWFilterFormatParameterNameSorter): Likewise.
* src/nwfilter/nwfilter_ebiptables_driver.c
(ebiptablesFilterOrderSort): Likewise.
* tests/virhashtest.c (testHashGetItemsCompKey)
(testHashGetItemsCompValue): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Make the virLXCProcessReadLogOutputData method ignore the log
lines about the container startup argv, ignore the generic
error message from libvirt_lxc when lxcContainerMain fails
and skip over blank lines.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The lxcContainerResolveSymlinks method merely logged some errors
as debug messages, rather than reporting them as proper errors.
This meant startup failures were not diagnosed at all.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure the lxcContainerMain method reports any errors that
occur during setup to stderr, where libvirtd will pick them
up.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for external checkpoints
although it shares most of the backend code.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1017227
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for managed save although
it shares most of the backend code.
In Fedora 20, libvirt_lxc crashes immediately at startup with a
trace
#0 0x00007f0cddb653ec in free () from /lib64/libc.so.6
#1 0x00007f0ce0e16f4a in virFree (ptrptr=ptrptr@entry=0x7f0ce1830058) at util/viralloc.c:580
#2 0x00007f0ce0e2764b in virResetError (err=0x7f0ce1830030) at util/virerror.c:354
#3 0x00007f0ce0e27a5a in virResetLastError () at util/virerror.c:387
#4 0x00007f0ce0e28858 in virEventRegisterDefaultImpl () at util/virevent.c:233
#5 0x00007f0ce0db47c6 in main (argc=11, argv=0x7fff4596c328) at lxc/lxc_controller.c:2352
Normally virInitialize calls virErrorInitialize and
virThreadInitialize, but we don't link to libvirt.so
in libvirt_lxc, and nor did we ever call the error
or thread initializers.
I have absolutely no idea how this has ever worked, let alone
what caused it to stop working in Fedora 20.
In addition not all code paths from virLogSetFromEnv will
ensure virLogInitialize is called correctly, which is another
possible crash scenario.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Previous commit
commit 7ada155cdf
Author: Gao feng <gaofeng@cn.fujitsu.com>
Date: Wed Sep 11 11:15:02 2013 +0800
DBus: introduce virDBusIsServiceEnabled
Made the cgroups code fallback to non-systemd based setup
when dbus is not running. It was too big a hammer though,
as it did not check what error code was received when the
dbus connection failed. Thus it silently ignored serious
errors from dbus such as "too many client connections",
which should always be treated as fatal.
We only want to ignore errors if the dbus unix socket does
not exist, or if nothing is listening on it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC code would read the log file if an LXC guest failed to
startup. There were a number of failure cases where the guest
will not start and libvirtd never gets as far as looking at the
log file.
Fix this by replacing some earlier generic errors with messages
from the log.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC controller main() method initialized 'rc' to 1
rather than '-1'. In the cleanup path it will print any
error to stderr, if-and-only-if rc < 0. Hence the incorrect
initialization caused errors to be lost.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The log message regex has been
[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug|info|warning|error :
The precedence of '|' is high though, so this is equivalent to matching
[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug
Or
info
Or
warning
Or
error :
Which is clearly not what it should have done. This caused the code to
skip over things which are not log messages. The solution is to simply
add brackets.
A test case is also added to validate correctness.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC controller uses dbus to talk to systemd to create
cgroups. This means that each LXC controller instance has
a dbus connection. The DBus daemon is limited to 256
connections by default and we want to be able to run many
1000 of containers.
While the dbus limit could be raised in the config files,
it is simpler to make libvirt LXC controller close its
dbus connection once everything is configured.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dbus_bus_get() function returns a shared bus connection that
all libraries in a process can use. You are forbidden from calling
close on this connection though, since you can never know if any
other code might be using it.
Add an option to use private dbus bus connections, if the app
wants to be able to close the connection.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since 5a468b38b6 we use SOL_LOCAL for the 2nd argument of getsockopt()
however Lion added the define SOL_LOCAL set to 0, which is the value to
the 2nd argument of getsockopt() for Unix sockets on Mac OS X. So
instead of using the define just pass 0 so we restore compatibility
with Snow Leopard and Leopard.
Reported at https://github.com/mxcl/homebrew/pull/23141
Rather than walking the possible driver backends by handle, use a helper
function. Additionally I've done a bit of refactoring in the code over
the past few commits so add myself to the copyright line.
After my patches, some functions gained one more argument
(@listenAddress) which wasn't included in debug printing of
arguments they were called with. Functions in question are:
qemuMigrationPrepareDirect and qemuMigrationPerform.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed a SIGSEGV-ing libvirtd on the destination when the qemu
died too quickly = in Prepare phase. What is happening here is:
1) [Thread 3493] We are in qemuMigrationPrepareAny() and calling
qemuProcessStart() which subsequently calls qemuProcessWaitForMonitor()
and qemuConnectMonitor(). So far so good. The qemuMonitorOpen()
succeeds, however switching monitor to QMP mode fails as qemu died
meanwhile. That is qemuMonitorSetCapabilities() returns -1.
2013-10-08 15:54:10.629+0000: 3493: debug : qemuMonitorSetCapabilities:1356 : mon=0x14a53da0
2013-10-08 15:54:10.630+0000: 3493: debug : qemuMonitorJSONCommandWithFd:262 : Send command '{"execute":"qmp_capabilities","id":"libvirt-1"}' for write with FD -1
2013-10-08 15:54:10.630+0000: 3493: debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE: watch=17 events=13
...
2013-10-08 15:54:10.631+0000: 3493: debug : qemuMonitorSend:956 : QEMU_MONITOR_SEND_MSG: mon=0x14a53da0 msg={"execute":"qmp_capabilities","id":"libvirt-1"}
fd=-1
2013-10-08 15:54:10.631+0000: 3262: debug : virEventPollRunOnce:641 : Poll got 1 event(s)
2) [Thread 3262] The event loop is trying to do the talking to monitor.
However, qemu is dead already, remember?
2013-10-08 15:54:13.436+0000: 3262: error : qemuMonitorIORead:551 : Unable to read from monitor: Connection reset by peer
2013-10-08 15:54:13.516+0000: 3262: debug : virFileClose:90 : Closed fd 25
...
2013-10-08 15:54:13.533+0000: 3493: debug : qemuMonitorSend:968 : Send command resulted in error internal error: early end of file from monitor: possible problem:
3) [Thread 3493] qemuProcessStart() failed. No big deal. Go to the
'endjob' label and subsequently to the 'cleanup'. Since the domain is
not persistent and ret is -1, the qemuDomainRemoveInactive() is called.
This has an (unpleasant) effect of virObjectUnref()-in the @vm object.
Unpleasant because the event loop which is about to trigger EOF callback
still holds a pointer to the @vm (not the reference). See the valgrind
output below.
4) [Thread 3262] So the event loop starts triggering EOF:
2013-10-08 15:54:13.542+0000: 3262: debug : qemuMonitorIO:729 : Triggering EOF callback
2013-10-08 15:54:13.543+0000: 3262: debug : qemuProcessHandleMonitorEOF:294 : Received EOF on 0x14549110 'migt10'
And the monitor is cleaned up. This results in calling
qemuProcessHandleMonitorEOF with the @vm pointer passed. The pointer is
kept in qemuMonitor struct.
==3262== Thread 1:
==3262== Invalid read of size 4
==3262== at 0x77ECCAA: pthread_mutex_lock (in /lib64/libpthread-2.15.so)
==3262== by 0x52FAA06: virMutexLock (virthreadpthread.c:85)
==3262== by 0x52E3891: virObjectLock (virobject.c:320)
==3262== by 0x11626743: qemuProcessHandleMonitorEOF (qemu_process.c:296)
==3262== by 0x11642593: qemuMonitorIO (qemu_monitor.c:730)
==3262== by 0x52BD526: virEventPollDispatchHandles (vireventpoll.c:501)
==3262== by 0x52BDD49: virEventPollRunOnce (vireventpoll.c:648)
==3262== by 0x52BBC68: virEventRunDefaultImpl (virevent.c:274)
==3262== by 0x542D3D9: virNetServerRun (virnetserver.c:1112)
==3262== by 0x11F368: main (libvirtd.c:1513)
==3262== Address 0x14549128 is 24 bytes inside a block of size 136 free'd
==3262== at 0x4C2AF5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==3262== by 0x529B1FF: virFree (viralloc.c:580)
==3262== by 0x52E3703: virObjectUnref (virobject.c:270)
==3262== by 0x531557E: virDomainObjListRemove (domain_conf.c:2355)
==3262== by 0x1160E899: qemuDomainRemoveInactive (qemu_domain.c:2061)
==3262== by 0x1163A0C6: qemuMigrationPrepareAny (qemu_migration.c:2450)
==3262== by 0x1163A923: qemuMigrationPrepareDirect (qemu_migration.c:2626)
==3262== by 0x11682D71: qemuDomainMigratePrepare3Params (qemu_driver.c:10309)
==3262== by 0x53B0976: virDomainMigratePrepare3Params (libvirt.c:7266)
==3262== by 0x1502D3: remoteDispatchDomainMigratePrepare3Params (remote.c:4797)
==3262== by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper (remote_dispatch.h:5741)
==3262== by 0x54322EB: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
The mon->vm is set in qemuMonitorOpenInternal() which is the correct
place to increase @vm ref counter. The correct place to decrease the ref
counter is then qemuMonitorDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The helper function virCompareLimitUlong compares limit values,
where value of 0 is equal to unlimited. If the latter parameter is 0,
it should return -1 instead of 1, hence the user can only set hard_limit when
swap_hard_limit currently is unlimited.
Worse, all callers pass 2 64-bit values, but on 32-bit platforms,
the second argument was silently truncated to 32 bits, which
could lead to incorrect computations.
Signed-off-by: Bing Bu Cao <mars@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The enum for virNetDevVPort is declared in the header file
virnetdevvportprofile.h, but for some reason the impl is
in netdev_vport_profile_conf.c.
This causes a dep from src/util onto src/conf which is not
allowed. Move the enum impl into virnetdevvportprofile.c
to break the circle.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This configuration knob is there to override default listen address for
-incoming for all qemu domains.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function takes exactly one argument: an address to check.
It returns true, if the address is an IPv4 or IPv6 address in numeric
format, false otherwise (e.g. for "examplehost").
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=994364
Whenever we check for ABI stability, we have new xml (e.g. provided by
user, or obtained from snapshot, whatever) which we compare to old xml
and see if ABI won't break. However, if the new xml was produced via
virDomainGetXMLDesc(..., VIR_DOMAIN_XML_MIGRATABLE) it lacks some
devices, e.g. 'pci-root' controller. Hence, the ABI stability check
fails even though it is stable. Moreover, we can't simply fix
virDomainDefCheckABIStability because removing the correct devices is
task for the driver. For instance, qemu driver wants to remove the usb
controller too, while LXC driver doesn't. That's why we need special
qemu wrapper over virDomainDefCheckABIStability which removes the
correct devices from domain XML, produces MIGRATABLE xml and calls the
check ABI stability function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '532fef36' added a call to fallocate() and some error
handling based on whether or not the function existed. This new
call resulted in libvirt-cim/cimtest failures when attempting to
create a volume with "0" (zero) allocation value. The failure is
logged as:
Oct 9 07:51:33 localhost libvirtd[8030]: cannot allocate 0 bytes in
file '/var/lib/libvirt/images/cimtest-vol.img': Invalid argument
This can also be seen with virsh vol-create-as:
error: Failed to create vol test
error: cannot allocate 0 bytes in file '/home/vm-images/test': Invalid
argument
error: Failed to create vol test
error: cannot allocate 0 bytes in file '/home/vm-images/test': Invalid
argument
It turns out fallocate() will return EINVAL when the incoming 'len'
(or allocation) value is 0 (or less).
At the beginning of the function qemuPrepareHostdevPCICheckSupport() is
called. After that @pcidevs is initialized. However, if the very first
command fails, we go to 'cleanup' label where virObjectUnref(pcidevs) is
called. Obviously, it is called before @pcidevs was able to get
initialized. Compiler warns about it:
CC qemu/libvirt_driver_qemu_impl_la-qemu_hostdev.lo
qemu/qemu_hostdev.c: In function 'qemuPrepareHostdevPCIDevices':
qemu/qemu_hostdev.c:824:19: error: 'pcidevs' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virObjectUnref(pcidevs);
^
cc1: all warnings being treated as errors
Prefer using VFIO (if available) to the legacy KVM device passthrough.
With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
Add code to check availability of PCI passhthrough using VFIO and the
legacy KVM passthrough and use it when starting VMs and hotplugging
devices to live machine.
Since 76b644c when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>
This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.
The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.
This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.
Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.
Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
Commit 2d74822a9e renamed
"freebsdNodeGetCPUCount" to "appleFreebsdNodeGetCPUCount", leaving one
call to "freebsdNodeGetCPUCount". Fix this other case.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We currently have other error codes in singular form, e.g.
VIR_ERR_NETWORK_EXIST. Cleanup the previous patch to match the form.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I created a storage volume(eg: test) from a storage pool(eg:vg10) using
the following command:"virsh vol-create-as --pool vg10 --name test --capacity 300M."
When I re-executed the above command, the output was as the following:
"error: Failed to create vol test
error: Storage volume not found: storage vol 'test' already exists"
I think the output "Storage volume not found" is not appropriate. Because in fact storage
vol test has been found at this time. And then I think virErrorNumber should includes
VIR_ERR_STORAGE_EXIST which can also be used elsewhere. So I make this patch. The result
is as following:
"error: Failed to create vol test
error: storage volume 'test' exists already"
The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.
Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.
The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The nwfilter driver only needs a reference to its private
state object, not a full virConnectPtr. Update the domUpdateCBStruct
struct to have a 'void *opaque' field instead of a virConnectPtr.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 27e81517a8 set the payload size to 256 KB, which is
actually the max packet size, including the size of the header.
Reduce this by VIR_NET_MESSAGE_HEADER_MAX (24) and set
VIR_NET_MESSAGE_LEGACY_PAYLOAD_MAX to 262120, which was the original
value before increasing the limit in commit eb635de1fe.
This fixes the following error:
error : nodeGetInfo:933 : this function is not supported
by the connection driver: node info not implemented on this platform
The freebsdNodeGetCPUCount was renamed to appleFreebsdNodeGetCPUCount
in order to make more visible the fact, that it works on Mac OS X too.
Mac OS X can use sysctlbyname as same as FreeBSD to get the CPU
frequency. However, the MIB style name is different from FreeBSD's.
And the unit of the return frequency is also different.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This fixes the following error:
error : virGetUserEnt:703 : Failed to find user record for uid '32654'
'32654' (it's random and varies) comes from getsockopt with
LOCAL_PEERCRED option. getsockopt returns w/o error but seems
to not set any value to the buffer for uid.
For Mac OS X, LOCAL_PEERCRED has to be used with SOL_LOCAL level.
With SOL_LOCAL, getsockopt returns a correct uid.
Note that SOL_LOCAL can be found in
/System/Library/Frameworks/Kernel.framework/Versions/A/Headers/sys/un.h.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
On RHEL 5, compilation fails with:
storage/storage_backend.c: In function 'createRawFile':
storage/storage_backend.c:339: warning: implicit declaration of function 'fallocate'
storage/storage_backend.c:339: warning: nested extern declaration of 'fallocate' [-Wnested-externs]
But:
$ grep HAVE_FALLOCATE config.h
/* #undef HAVE_FALLOCATE */
Huh? It turns out that in kernels that old, fallocate() is not
implemented (config.h is correct), but <linux/fs.h> defines
HAVE_FALLOCATE as an empty witness macro for a completely
different purpose. Since storage_backend.c is including
<linux/fs.h> on RHEL 5, we are hosed by the kernel definition.
Newer kernels no longer pollute the namespace, and it's fairly
easy to convert to an expression that works with both the old
kernel witness and the new-style config.h (undefined or 1).
Problem introduced in commit 532fef3.
* src/storage/storage_backend.c (createRawFile): Avoid namespace
pollution from kernel, by checking HAVE_FALLOCATE for a value.
Signed-off-by: Eric Blake <eblake@redhat.com>
I tried to test ./configure --without-lxc --without-remote.
First, the build failed with some odd errors, such as an
inability to build xen, or link failures for virNetTLSInit.
But when you think about it, once there is no remote code,
all of libvirtd is useless, any stateful driver that depends
on libvirtd is also not worth compiling, and any libraries
used only by RPC code are not needed. So I patched
configure.ac to make for some saner defaults when an
explicit disable is attempted. Similarly, since we have
migrated virnetdevbridge into generic code, the workaround
for Linux kernel stupidity must not depend on stateful
drivers being in use.
Then there's 'make check' that needs segregation.
Wow - quite a bit of cleanup to make --without-remote useful :)
* configure.ac: Let --without-remote toggle defaults on stateful
drivers and other libraries. Pick up Linux kernel workarounds
even when qemu and lxc are not being compiled.
* tests/Makefile.am (test_programs): Factor out programs that
require remote.
* src/libvirt_private.syms (rpc/virnet*.h): Move...
* src/libvirt_remote.syms: ...into new file.
* src/Makefile.am (SYM_FILES): Ship new syms file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Fixed the safezero call for allocating the rest of the file after cloning
an existing volume; it used to always use a zero offset, causing it to
only allocate the beginning of the file.
Also modified file creation to try to use fallocate(2) to pre-allocate
disk space before copying any data to make sure it fails early on if disk
is full and makes sure we can skip zero blocks when copying file contents.
If fallocate isn't available we will zero out the rest of the file after
cloning and only use sparse cloning if client requested a lower allocation
than the input volume's capacity.
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
My previous commit 7dc1d4ab was supposed to change safezero to allocate
1 megabyte at maximum, but had the logic reversed and will allocate 1
megabyte at minimum (and a lot more at maximum.)
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
mmap can fail on 32-bit systems if we're trying to zero out a lot of data.
Fall back to using block-by-block writing in that case. While we could map
smaller blocks it's unlikely that this code is used a lot and its easier to
just fall back to one of the existing methods.
Also modified the block-by-block zeroing to not allocate a megabyte of
zeroes if we're writing less than that.
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
Again stolen from qemu_driver.c, but dropping all the unneeded bits.
This aims to copy all the current qemu validation checks since that's
the most commonly used real driver, but some of the checks are
completely artificial in the test driver.
This only supports creation of internal snapshots for initial
simplicity.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1012824https://bugzilla.redhat.com/show_bug.cgi?id=1012834
Note that a similar problem was reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=827519
but the fix only worked for <interface type='hostdev'>, *not* for
<interface type='network'> where the network itself was a pool of
hostdevs.
The symptom in both cases was this error message:
internal error: Unable to determine device index for network device
In both cases the cause was lack of proper handling for netdevs
(<interface>) of type='hostdev' when scanning the netdev list looking
for alias names in qemuAssignDeviceNetAlias() - those that aren't
type='hostdev' have an alias of the form "net%d", while those that are
hostdev use "hostdev%d". This special handling was completely lacking
prior to the fix for Bug 827519 which was:
When searching for the highest alias index, libvirt looks at the alias
for each netdev and if it is type='hostdev' it ignores the entry. If
the type is not hostdev, then it expects the "net%d" form; if it
doesn't find that, it fails and logs the above error message.
That fix works except in the case of <interface type='network'> where
the network uses hostdev (i.e. the network is a pool of VFs to be
assigned to the guests via PCI passthrough). In this case, the check
for type='hostdev' would fail because it was done as:
def->net[i]->type == VIR_DOMAIN_NET_TYPE_HOSTDEV
(which compares what was written in the config) when it actually
should have been:
virDomainNetGetActualType(def->net[i]) == VIR_DOMAIN_NET_TYPE_HOSTDEV
(which compares the type of netdev that was actually allocated from
the network at runtime).
Of course the latter wouldn't be of any use if the netdevs of
type='network' hadn't already acquired their actual network connection
yet, but manual examination of the code showed that this is never the
case.
While looking through qemu_command.c, two other places were found to
directly compare the net[i]->type field rather than getting actualType:
* qemuAssignDeviceAliases() - in this case, the incorrect comparison
would cause us to create a "net%d" alias for a netdev with
type='network' but actualType='hostdev'. This alias would be
subsequently overwritten by the proper "hostdev%d" form, so
everything would operate properly, but a string would be
leaked. This patch also fixes this problem.
* qemuAssignDevicePCISlots() - would defer assigning a PCI address to
a netdev if it was type='hostdev', but not for type='network +
actualType='hostdev'. In this case, the actual device usually hasn't
been acquired yet anyway, and even in the case that it has, there is
no practical difference between assigning a PCI address while
traversing the netdev list or while traversing the hostdev
list. Because changing it would be an effective NOP (but potentially
cause some unexpected regression), this usage was left unchanged.
The XML parser reserves 'vnet' as a prefix for automatically
generated NIC device names. Switch the veth device creation
to use this prefix, so it does not have to worry about clashes
with user specified names in the XML.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The veth device creation code run in two steps, first it looks
for two free veth device names, then it runs ip link to create
the veth pair. There is an obvious race between finding free
names and creating them, when guests are started in parallel.
Rewrite the code to loop and re-try creation if it fails, to
deal with the race condition.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If veth device allocation has a fatal error, the veths
array may contain NULL device names. Avoid calling the
virNetDevVethDelete function on such names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The kernel automatically destroys veth devices when cleaning
up the container network namespace. During normal shutdown, it
is thus likely that the attempt to run 'ip link del vethN'
will fail. If it fails, check if the device exists, and avoid
reporting an error if it has gone. This switches to use the
virCommand APIs instead of virRun too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
During container cleanup there is a race where the kernel may
have destroyed the veth device before we try to set it offline.
This causes log error messages. Given that we're about to
delete the device entirely, setting it offline is pointless.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When querying for kvm, we try to find 'enabled' field. Hence the error
message should report we haven't found 'enabled' and not 'running'
(which is not even in the reply). Probably a typo or copy-paste error.
The qemuDomainChangeNet() is called when 'virsh update-device' is
invoked on a NIC. Currently, we fail to update the QoS even though
we have routines for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far the virNetDevBandwidthEqual() expected both ->in and ->out items
to be allocated for both @a and @b compared. This is not necessary true
for all our code. For instance, running 'update-device' twice over a NIC
with the very same XML results in SIGSEGV-ing in this function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
