In wireshark commit ceb8d954 (v1.99.2) they have changed the
signature of a function that determines how long a libvirt packet
is. Now it accepts a void pointer for passing data into the
function. Well, this is nice, but we don't need it right now.
Anyway, we have to change our code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the upcoming patch we will need yet another #ifdef code block
depending on wireshark version. Instead of defining
WIRESHARK_COMPAT2 or something lets just compare the version
right at the place so that we can clearly see what version broke
API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In wireshak commit 22149c55 (v.1.11.3) the API was renamed.
Follow the change in our code too. Since the wireshark change was
made in the very same version that we require at least we are
good to go.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In wireshark, they have introduced their own memory allocator
wmem. This means that we need to adapt our code to that change
too. Notably 0ad15f88ccf434e8210ca is the wireshark commit you
want to look at. It's the one where they dropped the old API. The
new allocator has been introduced in 84cc3daa (v1.10.0), however,
was not exposed until 5c05c9e0 (v1.10.0). Since we already are
requiring 1.11.3 or higher no other change is needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the wireshark commit e2735ecfdd7a96c they dropped
proto_tree_add_text in favor of proto_tree_add_item. Adapt to
this change.
Moreover, the proto_tree_add_item API is around for ages and we
are already using it anyway. Therefore we don't need to change
required version of wireshark.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit b22344f328 mistakenly reordered
Default-* lines. Thanks to that I noticed that we are very inconsistent
with our init scripts, so I took the liberty of synchronizing them,
updating them and making them all look shiny and new. So apart from
fixing the LSB requirements, I also fixed the ordering, specified
runlevels and fix the link to the reference specification.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Implement a --timestamp option for 'virsh net-event', similar to the
one for 'virsh event'.
When the option is used, the human-readable timestamp will be printed
before the message.
Implement a --timestamp option for 'virsh qemu-monitor-event', similar
to the one for 'virsh event'.
When the option is used, the human-readable timestamp will be printed
before the message, and the timing information provided by QEMU will
not be displayed.
No only coverity warns about this, but it kind of makes sense
too. We have a test whether host supports IOMMU. Some platforms
don't have it, I know. But in that case we should print a message
that it's unknown whether platform has it or not.
Before:
(no output)
After:
QEMU: Checking for device assignment IOMMU support : WARN (Unknown if this platform has IOMMU support)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The *event --loop commands would keep running even though a connection
to libvirtd is lost. This doesn't make a lot of sense since clearly we
won't get any new events from the closed connection.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This is no functional change, but I find it disturbing that
something_LDADD contains PIE_LDFLAGS while something_LDFLAGS
doesn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The manpage for sysconf() suggest including unistd.h as the
function is declared there. Even though we are not hitting any
compile issues currently, let's include the correct header file
instead of relying on some hidden include chain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commmit df8192aa introduced admin related rename and some minor
(caused by automated approach, aka sed) and some more severe isues along with
it. First reason to revert is the inconsistency with libvirt library.
Although we deal with the daemon directly rather than with a specific
hypervisor, we still do have a connection. That being said, contributors might
get under the impression that AdmDaemonNew would spawn/start a new daemon
(since it's admin API, why not...), or AdmDaemonClose would do the exact
opposite or they might expect DaemonIsAlive report overall status of the daemon
which definitely isn't the case.
The second reason to revert this patch is renaming virt-admin client. The
client tool does not necessarily have to reflect the names of the API's it's
using in his internals. An example would be 's/vshAdmConnect/vshAdmDaemon'
where noone can be certain of what the latter function really does. The former
is quite expressive about some connection magic it performs, but the latter does
not say anything, especially when vshAdmReconnect and vshAdmDisconnect were
left untouched.
https://bugzilla.redhat.com/show_bug.cgi?id=1281710
Commit id '3c7590e0a' added the flag to the rbd backend, but provided
no means via virsh to use the flag. This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.
For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.
Currently only supported for rbd backends.
https://bugzilla.redhat.com/show_bug.cgi?id=830056
Utilize recently added VIR_STORAGE_POOL_CREATE_WITH_BUILD* flags in
order to pass the flags along to the virStoragePoolCreateXML and
virStoragePoolCreate API's.
This affects the 'virsh pool-create', 'virsh pool-create-as', and
'virsh pool-start' commands. While it could be argued that pool-start
doesn't need the flags, they could prove useful for someone trying to
do one command build --overwrite and start command processing or
essentially starting with a clean slate.
NB:
This patch is loosely based upon code originally authored by Osier
Yang that were not reviewed and pushed, see:
https://www.redhat.com/archives/libvir-list/2012-July/msg00497.html
Although they both are the same now, a future patch will add new options
to pool-create-as. So create a common macro to capture commonality, then
use that in the command specific structure.
Although not currently used in more than one command, it soon will be
so create a common macro to be used in the new command location.
Additionally, add the ".flags = 0," for both to match the expections
of the structure being predefined.
Rather than continually cut/paste the "file" option for pool command
option structures, generate a macro which will commonly define it for
any command. Then of course use that macro.
Rather than continually cut/paste the "pool" option for pool command
option structures, generate a macro which will commonly define it for
any command. Then of course use that macro.
Instead of the custom error:
error: iothreadpin: invalid cpulist.
use vshCommandOptStringReq and let it report a more specific error:
error: Failed to get option 'cpulist': Option argument is empty
virAdmConnect was named after virConnect, but after some discussions,
most of the APIs called will be working with remote daemon and starting
them virAdmDaemon will make more sense. Only possibly controversal name
is CloseCallback (de)registration, and connecting to the daemon (which
will still be Open/Close), but even this makes sense if one thinks about
the daemon being opened and closed, e.g. as file, etc.
This way all the APIs working with the daemon will start with
virAdmDaemon prefix, they will accept virAdmDaemonPtr as first parameter
and that will better suit with other namings as well (virDomain*,
virAdmServer*, etc.).
Because in virt-admin, the connection name does not refer to a struct
that would have a connect in its name, also adjust 'connname' in
clients. And because it is not used anywhere in the vsh code, move it
from there into each client.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Due to the default of flags is VIR_CONNECT_LIST_DOMAINS_ACTIVE,
It doesn't show the domains that have been shutdown when we use
'virsh list' with only --state-shutoff.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a new API to get libvirt version. It is worth noting, that
libvirt-admin and libvirt share the same version number. Unfortunately,
our existing API isn't generic enough to be used with virAdmConnectPtr
as well. Also this patch wires up this API to the virt-admin client
as a generic cmdVersion command.
As we need a client disconnect handler, we also need a mechanism to register
such handlers for a client. This patch introduced both the close callbacks and
also the client vshAdmCatchDisconnect handler to be registered with it. By
registering the handler we still need to make sure the client can react to
daemon's events like disconnect or keepalive, so asynchronous I/O event polling
is necessary to be enabled too.
Since most of our APIs rely on an acive functional connection to a daemon and
we have such a mechanism in libvirt already, there's need to have such a way in
libvirt-admin as well. By introducing a new public API, this patch provides
support to check for an active connection.
This patch introduces virt-admin client which is based on virsh client,
but had to reimplement several methods to meet virt-admin specific needs
or remove unnecessary virsh specific logic.
Adding this feature will allow users to easily attach a hostdev network
interface using PCI passthrough.
The interface can be attached using --type=hostdev and PCI address or
as --source. This command also allows you to tell, whether the interface
should be managed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997561
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
While parsing device addresses we should use correct base and don't
count on auto-detect. For example, PCI address uses hex numbers, but
each number starting with 0 will be auto-detected as octal number and
that's wrong. Another wrong use-case is for PCI address if for example
bus is 10, than it's incorrectly parsed as decimal number.
PCI and CCW addresses have all values as hex numbers, IDE and SCSI
addresses are in decimal numbers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The number of vCPUs for a guest must be between 1 and the
maximum value configured in the domain XML. This commit
introduces checks to make sure that passing count <= 0
results in an error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1248277
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The condition checking whether --format was specified was incorrect.
virsh crashed if the following format was used:
virsh dump VM dump --format '' --memory-only
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1272301
This looks for existance of DMAR (Intel) and IVRS (AMD)
files under /sys/firmware/acpi/tables/, as a sign that
the platform has IOMMU present & enabled in the BIOS.
If these are present and /sys/kernel/iommu_groups does
not contain any entries this is taken as a sign that
the kernel has not enabled the IOMMU currently.
If no ACPI tables are found we can't distinguish between
disabled in BIOS and not present in the hardware, so we
have to give the user a generic hint.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Win32 does not have support for mntent.h header, so the
method which uses this must be stubbed out.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the virt-host-validate checks to see if the required
cgroups are compiled into the kernel and that they are
mounted on the system. The cgroups are all optional except
for 3 that LXC mandates
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently we just check that various devices are accessible.
This leads to inaccurate errors reported for /dev/kvm and
/dev/vhost-net if they exist but an unprivileged user lacks
access. Switch existing checks to look for file existance,
and add a separate check for accessibility of /dev/kvm
since some distros don't grant users access by default.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC driver requires the uts, mnt, pid & ipc
namespaces, while net & user namespaces are
optional. Validate all these are present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
Even after my rework of startupPolicy handling, one command
slipped my attention. The change-media command has a very unique
approach to constructing disk XML. However, it will not preserve
startupPolicy attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, our mingw build is broken. It's because while libvirt_shell
library is using some of our internal APIs, e.g. virStrndup, and
readline API but it's not being linked with nor libvirt.la nor
libreadline. Only subsequent users of the library, like virsh,
do link to the needed libraries. In fact, I'm surprised Linux
linker doesn't care, because how can it make a static library
with missing symbols is mystery to me.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Although 0 length block jobs aren't entirely useful, the output of virsh
blockjob is empty due to the condition that suppresses the output for
migration jobs that did not start. Since the only place that actually
uses the condition that suppresses the output is in migration, let's
move the check there and thus add support for 0 of 0 equaling to 100%.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1196711
After my "client rpc: Report proper error for keepalive disconnections"
patch, virsh would no long print a warning when it closes a connection
to a daemon after a keepalive timeout. Although the warning
virsh # 2015-09-15 10:59:26.729+0000: 642080: info :
libvirt version: 1.2.19
2015-09-15 10:59:26.729+0000: 642080: warning :
virKeepAliveTimerInternal:143 : No response from client
0x7efdc0a46730 after 1 keepalive messages in 2 seconds
was pretty ugly, it was still useful. This patch brings the useful part
back while making it much nicer:
virsh # error: Disconnected from qemu:///system due to keepalive timeout
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately attach-interface
was missing it. Maybe nobody had needed it yet. Well, I did
just now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Let's move some variables from an inside loop to global function
declaration header block. It's going to be easier for next
patches. At the same time, order the cleanup calls at the
function's end so it's easier to track which variables are freed
and which not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no reason why debug initialization could not be made completely
hidden, just like readline initialization is. The point of the global
initializer vshInit is to make initialization of smaller features transparent
to the user/caller.
Currently, we set interactive mode as default possibly reverting the
setting after we parse the command line arguments. There's nothing
particulary wrong with that, but a call to vshReadlineInit is performed
always in the global initializer just because the default mode is interactive.
Rather than moving vshReadlineInit call somewhere else (because another client
might want to implement interactive mode only), we could make the decision
if we're about to run in interactive mode once the command line is parsed.
Commit a0b6a36f separated vshInitDebug from the original vshInit
(before virsh got split and vshInit became virshInit - commit 834c5720)
in order to be able to debug command line parsing.
After the parsing is finished, debugging is reinitialized to work properly.
There might as well be other features that require re-initialization as
the command line could specify parameters that override our defaults which
had been set prior to calling vshArgvParse.
As part of the effort to stay consistent, change the vshInit signature
from returning int to returning bool. Moreover, remove the
unnecessary error label as there is no cleanup that would make use of
it.
Caller is responsible for freeing the result of virStringJoin()
when no longer needed:
==10701== 1 bytes in 1 blocks are definitely lost in loss record 1 of 806
==10701== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==10701== by 0xAADB679: strdup (in /lib64/libc-2.20.so)
==10701== by 0x4F18655: virStrdup (virstring.c:726)
==10701== by 0x4F175AF: virStringJoin (virstring.c:165)
==10701== by 0x131D4D: vshReadlineInit (vsh.c:2572)
==10701== by 0x1322DF: vshInit (vsh.c:2736)
==10701== by 0x1347C1: main (virsh.c:907)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.
The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.
<interface type='udp'>
<mac address='52:54:00:5c:67:56'/>
<source address='127.0.0.1' port='11112'>
<local address='127.0.0.1' port='22222'/>
</source>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>
QEMU call:
-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222
Notice the xml "local" entry becomes the "localaddr" for the qemu call.
reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When looking up a domain, we try to look up by ID, UUID and NAME
consequently while not really caring which of those lookups succeeds.
The problem is that if any of them fails, we dispatch the error from the
driver and that means setting both threadlocal and global error. Let's
say the last lookup (by NAME) succeeds and resets the threadlocal error as any
other API does, however leaving the global error unchanged. If the underlying
virsh command does not succeed afterwards, our cleanup routine in
vshCommandRun ensures that no libvirt error will be forgotten and that's
exactly where this global error comes in incorrectly.
# virsh domif-setlink 123 vnet1 up
error: interface (target: vnet1) not found
error: Domain not found: no domain with matching id 123
This patch also resets the global error which would otherwise cause some
minor confusion in reported error messages.
https://bugzilla.redhat.com/show_bug.cgi?id=1254152
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch removes the static keyword from the vshReadline which was
introduced in commit 834c5720e4. With
readline the vshReadline function is not static but when compiling
without readline it was defined as static which caused compilation
error.
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.
Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.
Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
This patch implements new virsh command, domrename.
Using domrename, it will be possible to rename domain from the virsh shell by
calling virRenameDomain API.
It takes two arguments, current domain name and new domain name.
Example:
virsh # list --all
Id Name State
----------------------------------------------------
- bar shut off
virsh # domrename bar foo
Domain successfully renamed
virsh # list --all
Id Name State
----------------------------------------------------
- foo shut off
virsh #
Signed-off-by: Tomas Meszaros <exo@tty.sk>
In my previous commit d7f5c88961 I tried to introduce support
for inbound.floor. But the code change was incomplete. This is
the change needed to fully enable the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6983d6d2 tried to improve parseRateStr but broke the build
instead for compilers that were not able to properly introspect the for
loop indexed by the enum resulting into the following error:
virsh-domain.c: In function 'parseRateStr':
virsh-domain.c:916:13: error: 'field_name' may be used uninitialized in this function [-Werror=maybe-uninitialized]
vshError(ctl, _("malformed %s field"), field_name);
^
virsh-domain.c:915:13: error: 'tmp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (virStrToLong_ullp(token, NULL, 10, tmp) < 0) {
^
Rather than trying to fix the code, refactor the function again by
reusing virStringSplit.
We have a function parseRateStr() that parses --inbound and
--outbound arguments to both attach-interface and domiftune.
Now that we have all virTypedParams macros needed for QoS,
lets parse even floor attribute. The extended format for the
arguments looks like this then:
--inbound average[,peak[,burst[,floor]]]
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function is used to parse a tuple delimited by commas into
virNetDevBandwidth structure. So far only three out of fore
fields are supported: average, peak and burst. The single missing
field is floor. Well, the parsing works, but I think we can do
better. Especially when we will need to parse floor too in very
close future.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1250287
When run domfsinfo in quiet mode, we cannot get any
useful information (just get \n), this is because
we didn't use vshPrint to print useful information.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reuse the vshBlockJobWait infrastructure to refactor cmdBlockCommit to
use the common code. This additionally fixes a bug when working with
new qemus, where when doing an active commit with --pivot the pivoting
would fail, since qemu reaches 100% completion but the job doesn't
switch to synchronized phase right away.
Introduce helper function that will provide logic for waiting for block
job completion so the 3 open coded places can be unified and improved.
This patch introduces the whole logic and uses it to fix
cmdBlockJobPull. The vshBlockJobWait function provides common logic for
block job waiting that should be robust enough to work across all
previous versions of libvirt. Since virsh allows passing user-provided
strings as paths of block devices we can't reliably use block job events
for detection of block job states so the function contains a great deal
of fallback logic.
Use the VSH_EXCLUSIVE_OPTIONS to exclude combinations of --pivot and
--keep-overlay and refactor the enforcing of the --wait option and other
flags that imply --wait.
Use the VSH_EXCLUSIVE_OPTIONS_VAR to interlock incompatible options.
Since a variable named 'abort' would conflict with older compilers use
VSH_EXCLUSIVE_OPTIONS for the --abort option.
Commit ed8155eafb documented that
mhz field in virNodeInfo might be 0 if the frequency is unknown. Modify
virsh to know about that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some drivers don't expose available huge page sizes in the
capabilities XML. For instance, LXC driver is one of those.
This has a downside that when virsh is trying to get
aggregated info on free pages per all NUMA nodes, it fails.
The problem is that the virNodeGetFreePages() API expects
caller to pass an array of page sizes he is interested in.
In virsh, this array is filled from the capabilities from
'/capabilities/host/cpu/pages' XPath. As said, in LXC
there's no such XPath and therefore virsh fails currently.
But hey, we can fallback: the page sizes are exposed under
'/capabilities/host/topology/cells/cell/pages'. The page
size can be collected from there, and voilà the command
works again. But now we must make sure that there are no
duplicates in the array passed to the public API. Otherwise
we won't get as beautiful output as we are getting now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's this condition:
flags & VIR_DOMAIN_AFFECT_CURRENT && virDomainIsActive(dom)
which can never be true since VIR_DOMAIN_AFFECT_CURRENT has hardcoded
value of zero. Therefore virDomainIsActive() is a dead code. However,
the condition could make sense if it is rewritten as the following:
!(flags & VIR_DOMAIN_AFFECT_CONFIG) && virDomainIsActive(dom)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '81dd81e' caused a regression when attempting to print a
specific vcpuid that is out of the range of the maximum vcpus for
the guest, such as:
$ virsh vcpupin $dom 1000
VCPU: CPU Affinity
----------------------------------
$
Rather than just recover the old message, let's adjust the message based
on what would be displayed for a similar failure in the set path, such as:
$ virsh vcpupin $dom 1000
error: vcpu 1000 is out of range of persistent cpu count 2
$ virsh vcpupin $dom 1000 --live
error: vcpu 1000 is out of range of live cpu count 2
$
Signed-off-by: Luyao Huang <lhuang@redhat.com>
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The address elements are all unsigned integers, so we should
use the appropriate print directive when printing it.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The SCSI address element attributes bus, target, and unit are expected
to be positive values, so make sure no one provides a negative value since
the value is stored as an unsigned.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
When the block job would fail while watching it using the "--wait"
option for blockcopy, virsh would rather unhelpfully report:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 4096 --verbose --wait
Now in mirroring phase
Add a special case when the block job vanishes while waiting for it to
finish to improve the message:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 8192 --verbose --wait
error: Block Copy unexpectedly failed
Add `virsh migrate' option `--migrate-disks' that allows CLI user to
explicitly specify block devices to migrate.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
You had only one job. That's what you can say about this example
binary. In future, parts of virsh that are usable for this binary
should be split into separate shell-utils and virt-admin should gain all
the cool features of virsh without too much code addition.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When reviewing some network patches, I've noticed we don't have
those switches to the 'net-list' command. We should. They are
merely copied over from 'list' command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of sticking to old code pattern use the one laid out by
cmdList. Use FILTER() macro instead of series of boolean
variables.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the pre-NUMA ages pinning a vCPU to all pCPUs was eaqual to deleting
the pinning info. Now it does not entirely work that way. Pinning a vCPU
to all pCPUs might be a desired operation. Additionally removal of the
pinning will result into using the default pinning information at the
next boot which might be different from all vcpus.
This patch removes the false assumption that we should remove the
pinning after pinning to all vCPUs and tweaks the documentation for
virsh.
A later patch will implement a new flag for the virDomainPinVcpuFlags
API that will allow to remove the pinning in a sane way.
When watching a job (save, managedsave, dump, migrate) virsh spawns a
thread to call the appropriate API and waits for the result while
watching for interruption signals (SIGINT, Ctrl-C on the terminal).
Whenever such signal is caught, virsh calls virDomainAbortJob, stops
waiting for the job, and returns the result of virDomainAbortJob.
This is wrong because the job might have finished in the meantime or it
might have been cancelled by someone else and virsh would just report
the failure to abort the job. However, we are not interested in the
virDomainAbortJob's result at all, we need to keep waiting for the main
job to finish and report its result instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1131755
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.
We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.
vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.
When shrinking a volume by a certain size, instead of typing
vol-resize volume 1G --delta --shrink
we allow the convience of specifying a negative value:
vol-resize volume -1G --delta --shrink
getting the same results with one more character.
A negative value only makes sense as a delta. Imply the
--delta parameter if the value is negative.
Still require --shrink, because the operation is potentially
destructive.
https://bugzilla.redhat.com/show_bug.cgi?id=1224088
commit id 'bd00e00e' neglected to add the new adapter source options
into the if condition that allowed printing the <source> XML fields.
The <adapter type='fc_host'.../> doesn't require other options in order
to be complete.
Some virsh commands have a size parameter, which is handled as scaled
integer. We don't have any *feature* that would allow to use '-1' as
maximum size, so it's safe to reject any negative values for those
commands.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1159171
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The option didn't have VSH_OT_INT type even thought it's expected
to be numeric, as shown by the fact that vshCommandOptInt() is later
used to retrieve its value.
Replace more than 30 ad-hoc error messages with a single, generic one
that contains the name of the option being processed and some hints
to help the user understand what could have gone wrong.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207043
When parsing a cpulist, the virBitmapParse is used. On an invalid
bitmap an error is reported, but the error gets cleared
immediately by subsequent public APIs call, e.g. virDomainFree().
Moreover, we don't check whether bitmap fits into maximal CPU ID
on the host. Therefore the following examples failed without any
error:
# virsh vcpupin test3 1 aaa
# virsh vcpupin test3 1 1000
Signed-off-by: Luyao Huang <lhuang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1191227
Since 0fa15b19 we have this variable SYNC_TIME which allows users to
synchronize time on domain resume. However, despite what documentation
says, it's by default on because it's never initialized. Fix this by
setting it to zero at the beginning of the libvirt-guests script.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Extend it to a universal helper used for clearing lists of any objects.
Note that the argument type is specifically void * to allow implicit
typecasting.
Additionally add a helper that works on non-NULL terminated arrays once
we know the length.
The --maximum option wasn't properly parsed and the equivalent flag
wasn't set. Fix this bug and also rewrite the way we check this option
by using new macro. The new approach is that --maximum requires
--config, no other combination is allowed, because they don't make sense.
The new error will be:
# virsh setvcpus test --maximum 10
error: Option --config is required by option --maximum
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1204033
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1161617
Add command to allow adding and removing IOThreads from the domain including
the configuration and live domain.
$ virsh iothreadadd --help
NAME
iothreadadd - add an IOThread to the guest domain
SYNOPSIS
iothreadadd <domain> <id> [--config] [--live] [--current]
DESCRIPTION
Add an IOThread to the guest domain.
OPTIONS
[--domain] <string> domain name, id or uuid
[--id] <number> iothread for the new IOThread
--config affect next boot
--live affect running domain
--current affect current domain
$ virsh iothreaddel --help
NAME
iothreaddel - delete an IOThread from the guest domain
SYNOPSIS
iothreaddel <domain> <id> [--config] [--live] [--current]
DESCRIPTION
Delete an IOThread from the guest domain.
OPTIONS
[--domain] <string> domain name, id or uuid
[--id] <number> iothread_id for the IOThread to delete
--config affect next boot
--live affect running domain
--current affect current domain
Assuming a running $dom with multiple IOThreads assigned and that
that the $dom has disks assigned to IOThread 1 and IOThread 2:
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadadd $dom 1
error: invalid argument: an IOThread is already using iothread_id '1' in iothreadpids
$ virsh iothreadadd $dom 1 --config
error: invalid argument: an IOThread is already using iothread_id '1' in persistent iothreadids
$ virsh iothreadadd $dom 4
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
4 0-3
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadadd $dom 4 --config
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
4 0-3
Assuming the same original configuration
$ virsh iothreaddel $dom 1
error: invalid argument: cannot remove IOThread 1 since it is being used by disk 'vde'
$ virsh iothreaddel $dom 3
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
virDomainGetJobStats is able to report statistics of a completed
migration, however to get usable downtime and total time statistics both
hosts have to keep synchronized time. To provide at least some
estimation of the times even when NTP daemons are not running on both
hosts we can just ignore the time needed to transfer a migration cookie
to the destination host. The result will be also inaccurate but a bit
more predictable. The total/down time will just be at least what we
report.
https://bugzilla.redhat.com/show_bug.cgi?id=1213434
Commit a0670ae caused a regression in 'virsh event' and
'virsh qemu-monitor-event' - if a user tries to filter the
command to a specific domain, an error message is printed:
$ virsh event dom --loop
error: internal error: virsh qemu-monitor-event: no domain VSH_OT_DATA option
and then the command continues as though no domain had been
supplied (giving events for ALL domains, instead of the
requested one). This is because the code was incorrectly
assuming that all "domain" options would be supplied via a
mandatory VSH_OT_DATA, even though "domain" is optional for
these two commands, so we had changed them to VSH_OT_STRING
to quit failing for other reasons (ever since it was decided
that VSH_OT_DATA and VSH_OT_STRING should no longer be
synonyms).
In looking at the situation, though, the code for looking up
a domain was making a pointless check for whether the option
exists prior to finding the option's string value, as
vshCommandOptStringReq does just fine at reporting any errors
when looking up a string whether or not the option was present.
So this is a case of regression fixing by pure code deletion :)
* tools/virsh-domain.c (vshCommandOptDomainBy): Drop useless filter.
* tools/virsh-interface.c (vshCommandOptInterfaceBy): Likewise.
* tools/virsh-network.c (vshCommandOptNetworkBy): Likewise.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh.h (vshCmdHasOption): Drop unused function.
* tools/virsh.c (vshCmdHasOption): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When set guest memory with a invalid parameter of --soft-limit,
it posts weird error:
$ virsh memtune r7 --hard-limit 20417224 --soft-limit 9007199254740992 \
--swap-hard-limit 35417224
error: Unable to parse integer parameter 'NAME
Change it to
error: Unable to parse integer parameter soft-limit
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1211550
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use virBitmapDataToString instead of constructing the ranges bit
by bit, remove the checking of parameters (that is already done
by the callers).
Let the callers choose the right bitmap, since there's only
one that uses this helper on a matrix-in-an-array.
$ sudo virsh change-media f19 hdc /mnt/data/devel/media/Fedora-16-x86_64-Live-KDE.iso
succeeded to complete action update on media
Change the message to:
Successfully {inserted,ejected,changed} media.
https://bugzilla.redhat.com/show_bug.cgi?id=967946
In virsh we have two printing functions: vshPrint() which prints a
string onto stdout and vshPrintExtra() which does not print anything
if virsh is run in quiet mode. Usually, the former is used to print
actual results, while the latter to print strings like table headers
and other formatting stuff. However, in cmdDomIfAddr we have
mistakenly used vshPrintExtra even for actual data. After this patch,
the output should look like the following:
# virsh -q domifaddr test3 --source agent
lo 00:00:00:00:00:00 ipv4 127.0.0.1/8
- - ipv6 ::1/128
ens8 52:54:00:1a:cb:3f ipv6 fe80::5054:ff:fe1a:cb3f/64
virbr0 52:54:00:db:51:e7 ipv4 192.168.122.1/24
virbr0-nic 52:54:00:db:51:e7 N/A N/A
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Dependant is flagged as wrong in US dictionary (only valid in UK
dictionary, and even then, it has only the financial sense and not the
inter-relatedness sense that we are more prone to be wanting throughout
code).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1206479
As described in virDomainBlockCopy() parameters description, the
VIR_DOMAIN_BLOCK_COPY_GRANULARITY parameter may require the value to
have some specific attributes (e.g. be a power of two or fall within a
certain range). And in qemu, a power of two is required. However, our
code does not check that and let qemu operation fail. Moreover, the
virsh man page is not as exact as it could be in this respect.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The overflow check for the bandwidth parameter did not jump to the
cleanup label.
Additionally virsh should use vshError instead of virReportError.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1206987
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit 2f36e6944 (re-)introduced a use of an identifier 'interface',
which causes this build failure on mingw:
../../tools/virsh-domain-monitor.c: In function 'cmdDomIfAddr':
../../tools/virsh-domain-monitor.c:2233:17: error: expected identifier or '(' before 'struct'
const char *interface = NULL;
^
See also commit 6512c8b. Sadly, I'm not quite sure how to write a
syntax check that can poison the use of this identifier.
* tools/virsh-domain-monitor.c (cmdDomIfAddr): Use ifacestr instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virNodeDeviceDettach API only works on PCI devices.
Originally added by commit 10d3272e, but the API never
supported USB devices.
Reported by: Martin Polednik <mpolednik@redhat.com>
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The variable holds formatted suffix to each line printed out
(address type, address and prefix). However, the variable is
never freed. At the same time, honour fact, that data held in
the variable is not constant.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make sure we don't print (null) (which in fact is printf()'s
cleverness anyway, not ours). If no HW address is present, print
"N/A" string just like we do for other fields.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The command did not modify the disk type and thus didn't allow to change
media from a file image to a block backed image or vice versa. In
addition when operating on a network backed removable devices the
command would replace the while <source> subelement with an invalid one.
This patch adds the --block option that allows to specify that the new
image is block backed and assumes that without that option all images
are file backed. Since network backends were always mangled it should
not cause problems.
Since cmdDetachDisk() calls into vshPrepareDiskXML() with
type == VSH_PREPARE_DISK_XML_NONE && source == NULL this would result
into skipping all the checks and effectively turn the function into a
XML formatter.
This patch changes the code to use the formatter directly so that the
function can be refactored in a easier way.
Wireshark supports pkg-config since 1.11.3. Right now we build
wireshark-dissectior tool as default trough rpm build only on
fedora >= 21 and there is new wireshark that supports pkg-config.
If someone wants to build libvirt with wireshark-dissector against old
wireshark, they should specify the location by hand.
This patch is mainly to fix wrong dependency on wireshark binary as it
doesn't make sense to require that binary file to just get version info
of that package in makefile.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit f182da20 (v1.2.6) caused a slight regression in virsh
reporting of a non-active block job; where it used to state
"Commit complete", it now states "Now in synchronized phase".
But the synchronized phase is only possible for an active commit.
For a reproducer, I created a chain 'a <- b <- c <- d <- e' and
ran virsh blockcommit $dom vda --top c --base a --verbose --wait
* tools/virsh-domain.c (cmdBlockCommit): Synchronized phase is
only possible on active commits.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1135491
$ virsh iothread --help
NAME
iothreadpin - control domain IOThread affinity
SYNOPSIS
iothreadpin <domain> <iothread> <cpulist> [--config] [--live] [--current]
DESCRIPTION
Pin domain IOThreads to host physical CPUs.
OPTIONS
[--domain] <string> domain name, id or uuid
[--iothread] <number> IOThread ID number
[--cpulist] <string> host cpu number(s) to set
--config affect next boot
--live affect running domain
--current affect current domain
Using the output from iothreadsinfo, allow changing the pinned CPUs for
a single IOThread.
$ virsh iothreadsinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadpin $dom 3 0-2
Then view the change
$ virsh iothreadsinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-2
If an invalid value is supplied or require option missing,
then an error will be displayed:
$ virsh iothreadpin $dom 4 3
error: invalid argument: iothread value out of range 4 > 3
$ virsh iothreadpin $dom 3
error: command 'iothreadpin' requires <cpulist> option
Now that qemuDomainBlocksStatsGather provides functions of both
qemuMonitorGetBlockStatsParamsNumber and qemuMonitorGetBlockStatsInfo we
can reuse it and kill a lot of code.
Additionally as a bonus qemuDomainBlockStatsFlags will now support
summary statistics so add a statement to the virsh man page about that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142636
Add the 'iothreadsinfo' command to display IOThread Info data. Allow for
[--live] or [--config] options in order to display live or config data
for an active domain.
$ virsh iothreadsinfo --help
NAME
iothreadsinfo - view domain IOThreads
SYNOPSIS
iothreadsinfo <domain> [--config] [--live] [--current]
DESCRIPTION
Returns basic information about the domain IOThreads.
OPTIONS
[--domain] <string> domain name, id or uuid
--config affect next boot
--live affect running domain
--current affect current domain
An active domain may return:
$ virsh iothreads $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0
$ echo $?
0
For domains which don't have IOThreads the following is returned:
$ virsh iothreads $dom
No IOThreads found for the domain
$ echo $?
0
For domains which are not running the following is returned:
$ virsh iothreads $dom --live
error: Unable to get domain IOThreads information
error: Requested operation is not valid: domain is not running
$ echo $?
1
Editing a domains configuration and modifying the iothreadpin data for
thread 3 from nothing provided to setting a cpuset of '0-1' and then
displaying using --config would display:
$ virsh iothreads f18iothr --config
IOThread ID CPU Affinity
----------------------------
1 2
2 3
3 0-1
$
Signed-off-by: John Ferlan <jferlan@redhat.com>
Fix vshMemtuneGetSize to return correct value. We can then decide
according that return code whether a parameter is present and valid or
not. This will allow as to accept 0 as a valid value.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
According to docs, we only support 2 link states for an interface
up/down, 'up' being the default state if link state is unspecified in
domain's XML, so the message when no link state is provided should be
changed a little.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1141119
Previously when a domain would get stuck in a domain job due to a
programming mistake we'd report the following control state:
$ virsh domcontrol domain
occupied (1424343406.150s)
The timestamp is invalid as the monitor was not entered for that domain.
We can use that to detect that the domain has an active job and report a
better error instead:
$ virsh domcontrol domain
error: internal (locking) error
https://bugzilla.redhat.com/show_bug.cgi?id=921426
Add to the man page a more complete description of what exactly the
command expects on input and will return on output based on what is
currently supported.
Perhaps missing findPoolSources implementations are backends for
sheepdog and rbd. Also missing any backend is zfs.
https://bugzilla.redhat.com/show_bug.cgi?id=1070695
Modify the virsh man page to more accurately describe which values are
set by the virsh setmem and displayed by the virsh memtune or dominfo
based on the setmem command results.
A disk using a source pool is listed as having a source '-' in domblklist
because it doesn't check the right XML syntax to find the source.
Add a check for "./source/volume" which is where the "path" (of sorts)
to the volume name is described.
NUMA enabled guest configuration explicitly specifies memory sizes for
individual nodes. Allowing the virDomainSetMemoryFlags API (and friends)
to change the total doesn't make sense as the individual node configs
are not updated in that case.
Forbid use of the API in case NUMA is specified.
The description of the virsh command 'cpu-models' was written in the
wrong context (i.e. beside the domain states).
This patch moves the command description just to the cpu related
commands like 'cpu-baseline' and 'cpu-compare'.
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Well, imagine domains were running, and as the host went down, they
were managesaved. Later, after some time, the host went up again and
domains got restored. But without correct time. And depending on how
long was the host shut off, it may take some time for ntp to sync the
time too. But hey, wait a minute. We have an API just for that! So:
1) Introduce SYNC_TIME variable in libvirt-guests.sysconf to allow
users control over the new functionality
2) Call 'virsh domtime --sync $dom' in the libvirt-guests script.
Unfortunately, this is all-or-nothing approach (just like anything
else with the script). Domains are required to have configured and
running qemu-ga inside.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The "virDomainGetInfo" will get for running domain only live info and for
offline domain only config info. There was no way how to get config info
for running domain. We will use "vshCPUCountCollect" instead to get the
correct cpu count that we need to pass to "virDomainGetVcpuPinInfo".
Also cleanup some unnecessary variables and checks that are done by
drivers.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1160559
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When editing a domain with 'virsh edit' and failing validation, the
usual message pops up:
Failed. Try again? [y,n,f,?]:
Turning off validation can be useful, mainly for testing (but other
purposes too), so this patch adds support for relaxing definition in
virsh-edit and makes 'virsh edit <domain>' more usable.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our hotplug code supports macvtap insertion to guests. However, we
somehow forgot about 'attach-interface' (which tries to build XML from
passed arguments and use virDomainAttachDeviceFlags()).
New type is accessible under 'direct' type, to keep the same type as
used in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of verbose string to enum conversion (if STREQ() else if
STREQ() else if STREQ() ...) lets use virDomainNetType{From,To}String.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The type of interface to attach is held in the variable 'typ'.
Depending on interface type selected by user, the variable is set
either to 1 (network), or 2 (bridge). Lets use already existing
enum from domain_conf.h instead: virDomainNetType.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1191016
virsh's domdisplay command looks in /domain/devices/graphics/@listen
of the domain's XML for the listen address, however for listen
type='network' (added in libvirt 0.9.4), the <graphics> element
doesn't have a listen attribute, but has a <listen> subelement,
*still* with no address (this is the inactive XML):
<graphics type='spice' autoport='yes' keymap='en-us'>
<listen type='network' network='default'/>
</graphics>
However, at domain start time the <listen> subelement gets its address
attribute filled in once libvirt figures out the IP address associated
with the named network (this is the status XML):
<graphics type='spice' port='5901' autoport='yes' keymap='en-us'>
<listen type='network' address='192.168.122.1' network='default'/>
</graphics>
So in these cases, we need to look at
/domain/devices/graphics/listen/@address instead.
Even though another patch is being pushed that will backfill
listen/@address into @listen, this patch is still useful, as it fixes
domdisplay for cases of a new virsh (with this patch) connecting to a
libvirtd that is newer than 0.9.4 but doesn't have the followup patch.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
Adding ccw bus address support to the optional address parameter of virsh
attach-disk. The format used is ccw:cssid. ssid.devno, e.g.
ccw:0xfe.0x0.0x0201
Virtio-ccw devices must have their cssid set to 0xfe.
Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add support for --reflink to the virsh 'vol-create-from' and 'vol-clone'
commands to signify usage of the VIR_STORAGE_VOL_CREATE_REFLINK flag in the
ensuing virStorageVolCreateXMLFrom API call.
Updated the man page to describe the new flag.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
--live and --config can't be specified together when querying the
configuration, but are valid when setting. The man page was hinting that
they are valid always.
https://bugzilla.redhat.com/show_bug.cgi?id=1138516
If the provided volume name doesn't match what parted generated as the
partition name, then return a failure.
Update virsh.pod and formatstorage.html.in to describe the 'name' restriction
for disk pools as well as the usage of the <target>'s <format type='value'>.
The 'virsh edit' command gets XML validation enabled by default,
with a --skip-validate option to disable it. The 'virsh define'
and 'virsh create' commands get a --validate option to enable
it, to avoid regressions for existing scripts.
The quality of error reporting from libxml2 varies depending
on the type of XML error made. Sometimes it is quite clear
and useful, other times it is obscure & inaccurate. At least
the user will see an error now, rather than having their
XML modification silently disappear.
Now that xenconfig supports parsing and formatting Xen's
XL config format, integrate it into the libxl driver's
connectDomainXML{From,To}Native functions.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commit 6b9964 enforces checking invalid use of VSH_OT_STRING with
VSH_OFLAG_REQ. This commit tries to do the same thing to stop using
VSH_OT_DATA without VSH_OFLAG_REQ and also fix existing misuse.
Signed-off-by: Hao Liu <hliu@redhat.com>
The 'pool-build' command description for --overwrite and --no-overwrite
indicated usage for only 'filesystem' pools; however, the 'disk' pool
also supports the flags as of commit id 'afa1029a'. So add a description
for that usage.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This patch introduces access to allocation information about
a backing chain of a live domain. While querying storage
volumes for read-only disks could provide some of the details,
we do NOT want to read() a file while qemu is writing it.
Also, there is one case where we have to rely on qemu: when
doing a block commit into a backing file, where that file is
stored in qcow2 format on a host block device, we want to know
the current highest write offset into that image, in order to
know if the disk must be resized larger. qemu-img does not
(currently) show this information, and none of the earlier
block APIs were extensible enough to expose it. But
virDomainListGetStats is perfect for the job!
We don't need a new group of statistics, as the existing block
group is sufficient. On the other hand, as existing libvirt
releases already report 1:1 mapping of block.count to <disk>
devices, changing the array size could confuse older clients;
and even with newer clients, the time and memory taken to
report additional statistics is not always necessary (backing
files are generally read-only except for block-commit, so while
read statistics may change, sizing statistics will not). So
the choice here is to add a new flag that only newer callers
will pass, when they are prepared for the additional information.
This patch introduces the new API, but it will take more
patches to get it implemented for qemu.
* include/libvirt/libvirt-domain.h
(VIR_CONNECT_GET_ALL_DOMAINS_STATS_BACKING): New flag.
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document it,
and add a new field when it is in use.
* tools/virsh-domain-monitor.c (cmdDomstats): Use new flag.
* tools/virsh.pod (domstats): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
I'm about to make block stats optionally more complex to cover
backing chains, where block.count will no longer equal the number
of <disks> for a domain. For these reasons, it is nicer if the
statistics output includes the source path (for local files).
This patch doesn't add anything for network disks, although we
may decide to add that later.
With this patch, I now see the following for the same domain as
in the previous patch (one qcow2 file, and an empty cdrom drive):
$ virsh domstats --block foo
Domain: 'foo'
block.count=2
block.0.name=hda
block.0.path=/var/lib/libvirt/images/foo.qcow2
block.1.name=hdc
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document
new field.
* tools/virsh.pod (domstats): Document new field.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Return the new
stat for local files/block devices.
(QEMU_ADD_NAME_PARAM): Add parameter.
(qemuDomainGetStatsInterface): Update caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
Each command that needs a connection causes a new connection to be
made. Reconnecting after a command failed is pointless, mainly when
there is no other command to run. Removeing three lines of code takes
care of that and keeps virsh working as it should.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add the optional adapter options for pool create/define. Results in
either:
<adapter type='scsi_host' name='scsi_host2'/>
or (on one line)
<adapter type='fc_host' parent='scsi_host5'
wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
being generated.
Add 3 new optional options for the pool-create-as and pool-define-as
command in order to define the 3 elements required in order to add
an auth element, such as:
<auth type='chap' username='myuser'>
<secret usage='libvirtiscsi'/>
</auth>
Commit 570d0f63 describes disabling negative offset usage for
vol-upload/download (e.g. cmdVolDownload and cmdVolUpload; however,
the change was only made to cmdVolDownload. There was no change to
cmdVolUpload. This patch adds the same checks for vol-upload.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1087104
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Commit 7557ddf added some additional block.* stats to
virDomainListGetStats, but failed to document them in 'man
virsh'. Also, I noticed some inconsistent use of commas.
* tools/virsh.pod (domstats): Tweak commas, add missing stats.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a "domfsinfo" command that shows a list of filesystems info mounted in
the guest. For example:
virsh # domfsinfo vm1
Mountpoint Name Type Target
-------------------------------------------------------------------
/ sda1 ext4 hdc
/opt dm-2 vfat vda,vdb
/mnt/test sdb1 xfs sda
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.
To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.
On 32-bit platforms with old gcc (hello RHEL 5 gcc 4.1.2), the
build fails with:
virsh-domain.c: In function 'cmdBlockCopy':
virsh-domain.c:2172: warning: comparison is always false due to limited range of data type
Adjust the code to silence the warning.
* tools/virsh-domain.c (cmdBlockCopy): Pacify RHEL 5 gcc.
Signed-off-by: Eric Blake <eblake@redhat.com>
When a block{pull, copy, commit} is aborted via keyboard interrupt,
the job is properly canceled followed by proper error message.
However, when the job receives an abort from another client connected
to the same domain, the error message incorrectly indicates that
a blockjob has been finished successfully, though the abort request
took effect. This patch introduces a new blockjob abort handler, which
is registered when the client calls block{copy,commit,pull} routine,
providing its caller the status of the finished blockjob.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135442
I noticed this while working on qemuDomainGetBlockInfo. Assigning
a bool value to an int variable compiles fine, but raises red flags
on the maintenance front as it becomes too easy to assign -1 or 2
or any other non-bool value to the same variable.
* cfg.mk (sc_prohibit_int_assign_bool): New rule.
* src/conf/snapshot_conf.c (virDomainSnapshotRedefinePrep): Fix
offenders.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotCreateXML): Likewise.
* src/test/test_driver.c (testDomainSnapshotAlignDisks):
Likewise.
* src/util/vircgroup.c (virCgroupSupportsCpuBW): Likewise.
* src/util/virpci.c (virPCIDeviceBindToStub): Likewise.
* src/util/virutil.c (virIsCapableVport): Likewise.
* tools/virsh-domain-monitor.c (cmdDomMemStat): Likewise.
* tools/virsh-domain.c (cmdBlockResize, cmdScreenshot)
(cmdInjectNMI, cmdSendKey, cmdSendProcessSignal)
(cmdDetachInterface): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Recent commit 12bd207e21 fixed few
VSH_OT_STRING options that should've been VSH_OT_DATA. That lead me to
this commit that enforces people to check that newly added options have
proper type. Thanks to virsh erroring out with error message, this will
immediately show up in 'make check' thanks to our virsh-synopsis test.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Even though vshCmddefOptParse() tried returning -1 if there was an
optional option specification that preceded a required one, it failed to
check that for boolean type options and options with VSH_OFLAG_REQ_OPT
flag set. On the other hand, it makes sense that VSH_OT_ARGV is
specified at the end of the option list.
Returning -1 enforces the proper ordering thanks to virsh-synopsis test
in 'make check'.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
According to comments in parsing functions, optional options should be
specified *after* required ones. It makes sense and help output looks
cleaner. The only exceptions are options with type == VSH_OT_ARGV.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch fixes the following issues.
1) When an invalid wwn is introduced, libvirt reports
"Malformed wwn: %s". The template won't be replaced.
2) "target" option for dompmsuspend and "xml" option for
save-image-define are required options and should use
VSH_OT_DATA instead of VSH_OT_STRING as an option type.
3) A typo.
Signed-off-by: Hao Liu <hliu@redhat.com>
Bandwidth options in blockcommit, blockcopy, blockjob and blockpull
are parsed by vshCommandOptULWrap() and should be shown as a number
type option.
And a typo is fixed.
Signed-off-by: Hao Liu <hliu@redhat.com>
When the list of domains is fetched and being printed, but in the
meantime one domain was undefined before its status was fetched, the
output then includes domain with "no state". With this patch, such
domain is skipped over as consecutive 'virsh list --all' (or the same
one ran a second later) wouldn't list it anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
After cidr_format is allocated by virAsprintf and used by vshPrintExtra
it needs to be freed.
Fix the following memory leak from valgrind:
18 bytes in 1 blocks are definitely lost in loss record 41 of 192
at 0x4C29BBD: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x85CE36F: __vasprintf_chk (vasprintf_chk.c:80)
by 0x4EE52D5: UnknownInlinedFun (stdio2.h:210)
by 0x4EE52D5: virVasprintfInternal (virstring.c:459)
by 0x4EE53CA: virAsprintfInternal (virstring.c:480)
by 0x14FE96: cmdNetworkDHCPLeases (virsh-network.c:1378)
by 0x13006B: vshCommandRun (virsh.c:1915)
by 0x12A9E1: main (virsh.c:3699)
Signed-off-by: Luyao Huang <lhuang@redhat.com>
C guarantees that static variables are zero-initialized. Some older
compilers (and also gcc -fno-zero-initialized-in-bss) create larger
binaries if you explicitly zero-initialize a static variable.
* tools/virsh-console.c (got_signal): Drop unused variable.
* tools/virsh-domain.c: Fix initialization.
* tools/virsh.c: Likewise.
* tools/virt-host-validate-common.c (virHostMsgWantEscape):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Slight adjustment to the qemu-attach man page to note device hotplug
and hot unplug may not work and that the environment should be considered
read-only
When starting an active block commit job in virsh, it will report
"Block Commit started", but for more precise message it could
report "Active Block Commit started".
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Few places still used hardcoded limit for maximum XML size for commands
that accept XML files. The hardcoded limits ranged from 8k to 1M. Use
VSH_MAX_XML_FILE to express this limit in a unified way. This will bump
the limit for the commands that used hardcoded string lengths to 10M.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1152427
Fix info in the command definition of allocpages, which is currently
pointing info for 'capabilities'.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
When libvirt-guests is configured to start guests on host
boot, it is possible for guests start and read the host
clock before it is synchronized. Services such as
libvirt-guests that require correct time should use the
Special Passive System Unit time-sync.target
http://www.freedesktop.org/software/systemd/man/systemd.special.html#time-sync.target
This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The unit of '--pagesize' of freepages is kibibytes.
https://bugzilla.redhat.com/show_bug.cgi?id=1145048
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
RDMA Live migration requires registering memory with the hardware, and
thus QEMU offers a new 'capability' to pre-register / mlock() the guest
memory in advance for higher RDMA performance before the migration
begins. This capability is disabled by default, which means QEMU will
register the memory with the hardware in an on-demand basis.
This patch exposes this capability with the following example usage:
virsh migrate --live --rdma-pin-all --migrateuri rdma://hostname domain qemu+ssh://hostname/system
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
RDMA migration uses the 'setup' state in QEMU to optionally lock
all memory before the migration starts. The total time spent in
this state is exposed as VIR_DOMAIN_JOB_SETUP_TIME.
Additionally, QEMU also exports migration throughput (mbps) for both
memory and disk, so let's add them too: VIR_DOMAIN_JOB_MEMORY_BPS,
VIR_DOMAIN_JOB_DISK_BPS.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainBlockStats.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainInterfaceStats.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add an iothread parameter to allow attaching to an IOThread, such as:
virsh attach-disk $dom $source $target --live --config --iothread 2 \
--targetbus virtio --driver qemu --subdriver raw --type disk
Coverity complained that checking the return of virDomainCreate()
was not consistent amongst the callers - so added the return check
to the objecteventtest.c and adjust the virt-login-shell to compare
< 0 rather than just non zero for the failure condition.
Coverity complains that on the first pass through the for loop that
'params' cannot be true, thus the ternary setting to "&" cannot be
done. Since we can only ever get to this point once, drop the ternary
When a domain is undefined, there are options to remove it's
managed save state or snapshots. However, there's another file
that libvirt creates per domain: the NVRAM variable store file.
Make sure that the file is not left behind if the domain is
undefined.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity notes that after we VIR_ALLOC_N(params, nparams) a failed call to
virDomainGetCPUStats could result in nparams being set to -1. In that case,
the subsequent virTypedParamsFree in cleanup will pass -1 which isn't good.
Use the returned value as the number of stats to display in the loop as
it will be the value reported from the hypervisor and may be less than
nparams which is OK
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity points out that if 'dom' isn't returned from virDomainQemuAttach,
then the code already jumps to cleanup, so there was no need for the
subsequent if (dom != NULL) check.
I moved the error message about failure into the goto cleanup on failure
and then removed the if (dom != NULL)
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity points out that by using EMPTYSTR(type) we are guarding against
the possibility that it could be NULL; however, based on how 'type' was
initialized to NULL, then using nested ternary if-then-else's (?:?:)
setting either "ipv4", "ipv6", or "" - there is no way it could be NULL.
Since "-" is supposed to mean something empty in a field - modify the
nested ternary to an easier to read/process if-then-else leaving the
initialization to NULL to mean "-" in the formatted output.
Also changed the name from 'type' to 'typestr'.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since 0766783abb
Coverity complains that the EDIT_FREE definition results in DEADCODE.
As it turns out with the change to use the EDIT_FREE macro the call to
vir*Free() wouldn't be necessary nor would it happen...
Prior code to above commitid would :
vir*Ptr foo = NULL;
...
foo = vir*GetXMLDesc()
...
vir*Free(foo);
foo = vir*DefineXML()
...
And thus the free was needed. With the change to use EDIT_FREE the
same code changed to:
vir*Ptr foo = NULL;
vir*Ptr foo_edited = NULL;
...
foo = vir*GetXMLDesc()
...
if (foo_edited)
vir*Free(foo_edited);
foo_edited = vir*DefineXML()
...
However, foo_edited could never be set in the code path - even with
all the goto's since the only way for it to be set is if vir*DefineXML()
succeeds in which case the code to allow a retry (and thus all the goto's)
never leaves foo_edited set
All error paths lead to "cleanup:" which causes both foo and foo_edited
to call the respective vir*Free() routines if set.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Tweak the messages so that they mention "title" rather than
"description" when operating in title mode. Also fixes one missing "%s"
before non-formatted gettext message.
Before:
$ virsh desc --title dom
No description for domain: dom
After:
$ virsh desc --title dom
No title for domain: dom
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140034
Total time of a migration and total downtime transfered from a source to
a destination host do not count with the transfer time to the
destination host and with the time elapsed before guest CPUs are
resumed. Thus, source libvirtd remembers when migration started and when
guest CPUs were paused. Both timestamps are transferred to destination
libvirtd which uses them to compute total migration time and total
downtime. Obviously, this requires the time to be synchronized between
the two hosts. The reported times are useless otherwise but they would
be equally useless if we didn't do this recomputation so don't lose
anything by doing it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The parser accepts P and E, so the formatter should too.
* tools/virsh.c (vshPrettyCapacity): Handle larger units.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit c1d75de caused this warning on 32-bit platforms (fatal when
-Werror is enabled):
virsh-domain.c: In function 'cmdBlockCopy':
virsh-domain.c:2003:17: error: comparison is always false due to limited range of data type [-Werror=type-limits]
Forcing the left side of the < to be ull instead of ul shuts up
the 32-bit compiler while still protecting 64-bit code from overflow.
* tools/virsh-domain.c (cmdBlockCopy): Add type coercion.
Signed-off-by: Eric Blake <eblake@redhat.com>
Expose the new power of virDomainBlockCopy through virsh (well,
all but the finer-grained bandwidth, as that is its own can of
worms for a later patch). Continue to use the older API where
possible, for maximum compatibility.
The command now requires either --dest (with optional --format
and --blockdev), to directly describe the file destination, or
--xml, to name a file that contains an XML description such as:
<disk type='network'>
<driver type='raw'/>
<source protocol='gluster' name='vol1/img'>
<host name='red'/>
</source>
</disk>
[well, it may be a while before the qemu driver is actually patched
to act on that particular xml beyond just parsing it, but the virsh
interface won't need changing at that time]
Non-zero option parameters are converted into virTypedParameters,
and if anything requires the new API, the command can synthesize
appropriate XML even if the --dest option was used instead of --xml.
The existing --raw flag remains for back-compat, but the preferred
spelling is now --format=raw, since the new API now allows us
to specify all formats rather than just a boolean raw to suppress
probing.
I hope I did justice in describing the effects of granularity and
buf-size on how they get passed through to qemu.
* tools/virsh-domain.c (cmdBlockCopy): Add new options --xml,
--granularity, --buf-size, --format. Make --raw an alias for
--format=raw. Call new API if new parameters are in use.
* tools/virsh.pod (blockcopy): Document new options.
Signed-off-by: Eric Blake <eblake@redhat.com>
I'm about to extend the capabilities of blockcopy. Hiding a few
common lines of implementation gets in the way of the new required
logic, and putting the new logic in the common implementation won't
benefit any of the other blockjob operations. Therefore, it is
simpler to just do the work inline. There should be no semantic
change in this patch.
* tools/virsh-domain.c (blockJobImpl): Move block copy guts...
(cmdBlockCopy): ...into their lone caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>. While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.
Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type. But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick. So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Expose the new flag just added to virDomainGetBlockJobInfo.
With --raw, the presence or absence of --bytes determines which
flag to use in the single API call. Without --raw, the use of
--bytes forces an error if the server doesn't support it,
otherwise, the code tries to silently fall back to scaling the
MiB/s value.
My goal is to eventually also support --bytes in bandwidth mode;
but that's a bit further down the road (and needs a new API flag
added in libvirt.h first).
This changes the human output, but the previous patch added
raw output precisely so that we can have flexibility with the
human output. For this commit, I used qemu-monitor-command to
force an unusual bandwidth, but the same will be possible once
qemu implements virDomainBlockCopy:
Before:
Block Copy: [100 %] Bandwidth limit: 2 MiB/s
After:
Block Copy: [100 %] Bandwidth limit: 1048577 bytes/s (1.000 MiB/s)
The cache avoids having to repeatedly checking whether the flag
works when talking to an older server, when multiple blockjob
commands are issued during a batch session and the user is
manually polling for job completion.
* tools/virsh.h (_vshControl): Add a cache.
* tools/virsh.c (cmdConnect, vshReconnect): Initialize the cache.
* tools/virsh-domain.c (opts_block_job): Add --bytes.
* tools/virsh.pod (blockjob): Document this.
Signed-off-by: Eric Blake <eblake@redhat.com>
The current output of 'blockjob [--info]' is a single line
designed for human consumption; it's not very nice for machine
parsing. Furthermore, I have plans to modify the line in
response to the new flag for controlling bandwidth units.
Solve that by adding a --raw parameter, which outputs
information closer to the C struct.
$ virsh blockjob testvm1 vda --raw
type=Block Copy
bandwidth=1
cur=197120
end=197120
The information is indented, because I'd like for a later patch
to add a mode that iterates over all the vm's disks with status
for each; in that mode, each block name would be listed unindented
before information (if any) about that block.
Now that we have a raw mode, we can guarantee that it won't change
format over time. Any app that cares about parsing the output can
try --raw, and if it fails, know that it was talking to an older
virsh and fall back to parsing the human-readable format which had
not changed until now; meanwhile, when not using --raw, we have
freed future virsh to change the output to whatever makes sense.
My first change to human mode: this command now guarantees a line
is printed on successful use of the API, even when the API did
not find a current block job (consistent with the rest of virsh).
Bonus: https://bugzilla.redhat.com/show_bug.cgi?id=1135441
complained that this message was confusing:
$ virsh blockjob test1 hda --async --bandwidth 10
error: conflict between --abort, --info, and --bandwidth modes
even though the man page already documents that --async implies
abort mode, all because '--abort' wasn't present in the command
line. Since I'm adding another case where options are tied
to or imply a mode, I changed that error to:
error: conflict between abort, info, and bandwidth modes
* tools/virsh-domain.c (cmdBlockJob): Add --raw parameter; tweak
error wording.
* tools/virsh.pod (blockjob): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
I have plans to make future enhancements to the job list mode,
which will be easier to do if the common blockJobImpl function
is not mixing a query command with multiple modify commands.
Besides, it just feels weird that all callers to blockJobImpl
had to supply both a bandwidth input argument (unused for info
mode) and an info output argument (unused for all other modes);
not to mention I just made similar cleanups on the libvirtd
side.
The only reason blockJobImpl returned int was because of info
mode returning -1/0/1 (all other job API are -1/0), so that
can also be cleaned up. No user-visible changes in this commit.
* tools/virsh-domain.c (blockJobImpl): Change signature and return
value. Drop info handling.
(cmdBlockJob): Handle info here.
(cmdBlockCommit, cmdBlockCopy, cmdBlockPull): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add "domstats" command that excercises both of the new APIs depending if
you specify a domain list or not. The output is printed as a key=value
list of the returned parameters.
resolves https://bugzilla.redhat.com/show_bug.cgi?id=1132305:
The error message for an out-of-range argument was confusing:
virsh -k 9999999999
error: option --k requires a positive numeric argument
After this patch, it is:
error: Invalid value for option -k
Signed-off-by: Eric Blake <eblake@redhat.com>
While prepping for virDomainBlockJob patches, I found some dead code.
* tools/virsh-domain.c (blockJobImpl): Kill unused 'name'.
Signed-off-by: Eric Blake <eblake@redhat.com>
net-undefine doesn't only undefine an inactive network,
but also an active network(persistent), it just cannot
undefine a transient network.
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
* tools/virsh.pod (migrate): Add --auto-converge flag
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A possible fix to issue:
http://www.redhat.com/archives/libvir-list/2014-August/thread.html#00227
While doing migration on KVM host, found problem sometimes:
VM is already running on the target host and disappears from source
host, but 'virsh migrate' command line hangs, cannot exit normally.
If pressing "ENTER" key, it will exit.
The code hangs at tools/virsh-domain.c: cmdMigrate
->vshWatchJob->poll():
poll() is trying to select pipe_fd, which is used to receive message
from doMigrate thread. In debugging, found that doMigrate finishes
and at the end it does call safewrite() to write the retval ('0' or
'1') to pipe_fd, and the write is completed. But cmdMigrate poll()
cannot get the event. If pressing "ENTER" key, poll() can get the
event and select pipe_fd, then command line can exit.
In current code, authentication thread which is called by vshConnect
will use stdin, and at the same time, in cmdMigrate main process,
poll() is listening to stdin, that probably affect poll() to get
pipe_fd event. Better to move authentication before vshWatchJob. With
this change, above problem does not exist.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.
Features supported:
- pool-start, pool-stop
- pool-info
- vol-list
- vol-create / vol-delete
Pool definition looks like that:
<pool type='zfs'>
<name>myzfspool</name>
<source>
<name>actualpoolname</name>
</source>
</pool>
The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.
User has to create a pool on his own, this driver doesn't
support pool creation currently.
A volume could be used with Qemu by adding an entry like this:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='myzfspool' volume='vol5'/>
<target dev='hdc' bus='ide'/>
</disk>
This makes the paragaph about attach-interface more descriptive and
correct, adding in a few bits of information that were previously
missing, e.g. --script is only allowed for bridge interfaces of Xen
domains, target name is regenerated if it starts with vnet, mac
address will be autogenerated if not specified.
(I did this in response to an email asking why a script couldn't be
specified for a bridge interface of a qemu domain, and why an
interface of type='ethernet' couldn't be created with
attach-interface)
We parse the bandwidth rates as unsinged long long,
then try to fit them in VIR_TYPED_PARAM_UINT.
Report an error if they exceed UINT_MAX instead of
quietly using wrong values.
https://bugzilla.redhat.com/show_bug.cgi?id=1043735
https://bugzilla.redhat.com/show_bug.cgi?id=1072653
Upon successful upload of a volume, the target volume and storage pool
were not updated to reflect any changes as a result of the upload. Make
use of the existing stream close callback mechanism to force a backend
pool refresh to occur in a separate thread once the stream closes. The
separate thread should avoid potential deadlocks if the refresh needed
to wait on some event from the event loop which is used to perform
the stream callback.
Commit id '0e2d7305' modified the code to allow a negative value to be
supplied for the bandwidth argument of the various block virsh commands
and the migrate-setspeed; however, it failed to update the man page to
describe the "feature" whereby a very large value could be interpreted
by the hypervisor to mean maximum value allowed. Although initially
designed to handle a -1 value, the reality is just about any negative
value could be provided and essentially perform the same feature.
https://bugzilla.redhat.com/show_bug.cgi?id=1087104
Commit id 'c6212539' explicitly allowed a negative value to be used for
offset and length as a shorthand for the largest value after commit id
'f18c02ec' modified virStrToLong_ui() to essentially disallow a negative
value.
However, allowing a negative value for offset ONLY worked if the negative
value was -1 since the eventual lseek() does allow a -1 to mean the end
of the file. Providing other negative values resulted in errors such as:
$ virsh vol-download --pool default qcow3-vol2 /home/vm-images/raw \
--offset -2 --length -1000
error: cannot download from volume qcow3-vol2
error: Unable to seek /home/vm-images/qcow3-vol2 to 18446744073709551614: Invalid argument
$
Thus, it seems unreasonable to expect or allow a negative value for offset
since the only benefit is to lseek() to the end of the file and then only
take advantage of how the OS would handle such a seek. For the purposes of
upload or download of volume data, that seems to be a no-op. Therefore,
disallow a negative value for offset.
Additionally, modify the man page for vol-upload and vol-download to provide
more details regarding the valid values for both offset and length.
In many places we define a variable as a 'const char *' when in fact
we modify it just a few lines below. Or even free it. We should not do
that.
There's one exception though, in xenSessionFree() xenapi_utils.c. We
are freeing the xen_session structure which is defined in
xen/api/xen_common.h public header. The structure contains session_id
which is type of 'const char *' when in fact it should have been just
'char *'. So I'm leaving this unmodified, just noticing the fact in
comment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Assign the value we're comparing:
(val = func()) < 0
instead of assigning the comparison value:
(val = func() < 0)
Both were introduced along with the code,
the TLS tests by commit bd789df in 0.9.4
net events by commit de87691 in 1.2.2.
Note that the event id type fix is a no-op:
vshNetworkEventIdTypeFromString can only return
-1 (failure) and the event is never used or
0 (the only possible event) and the value of 0 < 0 is still 0.
Snapshots and block-copy have a flag that forces qemu to re-use existing
file. Our docs weren't exactly clear on what the existing file should
contain for this to actually work.
Re-word the docs a bit to state that the file needs to be pre-created in
the desired format and the backing chain metadata needs to be set prior
to handing it over to qemu.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1084360
According to the code, 'virsh numatune' supports integers for
specifying --mode as well as the string definitions "strict",
"interleave", and "preferred". However, this possibility was not
documented anywhere, so this patch adds it to both the man page and
command help.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1085706
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introduce flag for the block rebase API to allow the rebase operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
Introduce flag for the block commit API to allow the commit operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
Similary to cmdDetachDisk fetch the inactive definition when --config
is specified as the active may not contain the network interface
if it was plugged with --config.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1056902
https://bugs.gentoo.org/show_bug.cgi?id=508336
At wireshark, they have this promise to change public dissector APIs
only with minor version number change. Which they did when releasing
the version of 1.12.
Firstly, they've changed tvb_memdup() in
a0c53ffaa1bb46d8c9db2ec739401aa411c9790e so now it takes four arguments
instead of three. The new argument is placed at the very beginning of
the list of arguments and basically says the scope where we'd like to
allocate the memory. According to the documentation NULL should be the
default value.
Then, the tcp_dissect_pdus() signature changed too. Well, the function
that actually dissects reassembled packets as tcp_dissect_pdus()
reorder TCP packets into one big chunk and then calls a user function
to dissect the PDU at once. The change is dated back to
8081cf1d90397cbbb4404f9720595e1537ed5e14.
Then, WS_DLL_PUBLIC_NOEXTERN was replaced with WS_DLL_PUBLIC_DEF in
5d87a8c46171f572568db5a47c093423482e342f.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The rationale is to not duplicate code which is done in
packet-libvirt.h for instance. Moreover, this way we can drop
__attribute_((unused)) used int packet-libvirt.c in favor of
ATTRIBUTE_UNUSED.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The API is exposed under 'domcapabilities' command. Currently, with
the variety of drivers that libvirt supports, none of the command
arguments is obligatory, but all are optional instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
By default, the bus type is inferred from the style of the device
name('target' in this command), e.g. a device named 'sda' will
typically be exported using a SCSI bus. Actually, not only SCSI bus,
but USB/SATA bus also use this kind of device name. So add '--bus'
option for attach-disk command to allow user specify the target bus.
Signed-off-by: Yanbing Du <ydu@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.
The new VIR_CONNECT_COMPARE_CPU_FAIL_INCOMPATIBLE flag for
virConnectCompareCPU can be used to get an error
(VIR_ERR_CPU_INCOMPATIBLE) describing the incompatibility instead of the
usual VIR_CPU_COMPARE_INCOMPATIBLE return code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's just open the file right away and deal with errors. Moreover,
there's no reason to forbid logging to, e.g., a pipe.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Use virNetworkGetDHCPLeases and virNetworkGetDHCPLeasesForMAC in virsh.
The new feature supports the follwing methods:
1. Retrieve leases info for a given virtual network
2. Retrieve leases info for given network interface
tools/virsh-domain-monitor.c
* Introduce new command : net-dhcp-leases
Example Usage: net-dhcp-leases <network> [mac]
virsh # net-dhcp-leases --network default6
Expiry Time MAC address Protocol IP address Hostname Client ID or DUID
-------------------------------------------------------------------------------------------------------------------
2014-06-16 03:40:14 52:54:00:85:90:e2 ipv4 192.168.150.231/24 fedora20-test 01:52:54:00:85:90:e2
2014-06-16 03:40:17 52:54:00:85:90:e2 ipv6 2001:db8:ca2:2:1::c0/64 fedora20-test 00:04:b1:d8:86:42:e1:6a:aa:cf:d5:86:94:23:6f:94:04:cd
2014-06-16 03:34:42 52:54:00:e8:73:eb ipv4 192.168.150.181/24 ubuntu14-vm -
2014-06-16 03:34:46 52:54:00:e8:73:eb ipv6 2001:db8:ca2:2:1::5b/64 - 00:01:00:01:1b:30:c6:aa:52:54:00:e8:73:eb
tools/virsh.pod
* Document new command
src/internal.h
* Introduce new macro: EMPTYSTR
In the 404bac14 the @tmp variable was introduced. It's purpose is to
avoid typecasting when parsing --pagesize argument. However, if the
argument is not presented, tmp may be used uninitialized resulting in
bogus virNodeGetFreePages() API call:
virsh freepages --cellno 2
error: Failed to open file '/sys/devices/system/node/node2/hugepages/hugepages-4294967295kB/free_hugepages': No such file or directory
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 9e3efe53 broke the build under valgrind or clang, by writing
8 bytes through an allocation of 4 bytes. It also risks multiplication
overflow when mallocing (that's a pervasive problem that needs an
audit in the rest of the code, but we might as well fix this one while
we are here), and had a typo.
* tools/virsh-host.c (cmdFreepages): Avoid integer overflow and
undefined behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add knobs to virsh to manage a 2-phase active commit of the top
layer, similar to knobs already present on blockcopy. While this
code will fail until later patches actually implement the new
knobs in the qemu driver, doing it now proves that the API is
usable and also makes it easier for testing the qemu changes as
they are made.
* tools/virsh-domain.c (cmdBlockCommit): Add --active, --pivot,
and --keep-overlay options, modeled after blockcopy.
(blockJobImpl): Support --active flag.
* tools/virsh.pod (blockcommit): Document new flags.
(blockjob): Mention 2-phase commit interaction.
Signed-off-by: Eric Blake <eblake@redhat.com>
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name. It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name. But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).
Adam Litke reported that having an unstable string between events
makes life harder for clients. Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda'). As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.
But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it. Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix). We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).
Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.
* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Peter's review of an early version of my addition of active block
commit pointed out some issues that I was copying from the block
copy code; fix them up now before perpetuating them.
For virsh commands that manage a single API call, it's nice to have
a 1:1 mapping of options to flags, so that we can test that
lower-layer software handles flag combinations correctly. But where
virsh is introducing syntactic sugar to combine multiple API calls
into a single user interface, we might as well make that interface
compact. That is, we should allow the shorter command-line of
'blockcopy $dom $disk --pivot' without having to explicitly specify
--wait, because this isn't directly a flag passed to a single
underlying API call.
Also, my use of embedded ?: ternaries bordered on unreadable.
* tools/virsh-domain.c (cmdBlockCopy): Make --pivot, --finish,
and --timeout imply --wait. Drop excess ?: operators.
* tools/virsh.pod (blockcopy): Update documentation.
Signed-off-by: Eric Blake <eblake@redhat.com>
The vcpupin command allowed specifying a negative number for the --vcpu
argument. This would the overflow when the underlying virDomainPinVcpu
API was called.
$ virsh vcpupin r7 -1 0
error: numerical overflow: input too large: 4294967295
Switch the vCPU variable to a unsigned int and parse it using the
corresponding function.
Also improve the vcpupin test to cover all the defects.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1101059
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the vol-*load two bandwidth functions that use this helper
introduce vshCommandOptULongLongWrap.
To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the two bandwidth functions that use this helper introduce
vshCommandOptULWrap. Although currently the migrate-setspeed function
for the qemu driver will reject -1 as maximum.
Use virStrToLong_uip instead of virStrToLong_ui to reject negative
numbers in the helper. None of the callers expects the wraparound
"feature" for negative numbers.
Also add a function that allows wrapping of negative numbers as it might
be used in the future and be explicit about the new semantics in the
function docs.
the 'migration_host' description may be a bit difficult to
understand for some users, so enhance the manual
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that qemu 2.0 allows commit of the active layer, people are
attempting to use virsh blockcommit and getting into a stuck
state, because libvirt is unprepared to handle the two-phase
commit required by qemu.
Stepping back a bit, there are two valid semantics for a
commit operation:
1. Maintain a 'golden' base, and a transient overlay. Make
changes in the overlay, and if everything appears to work,
commit those changes into the base, but still keep the overlay
for the next round of changes; repeat the cycle as desired.
2. Create an external snapshot, then back up the stable state
in the backing file. Once the backup is complete, commit the
overlay back into the base, and delete the temporary snapshot.
Since qemu doesn't know up front which of the two styles is
preferred, a block commit of the active layer merely gets
the job into a synchronized state, and sends an event; then
the user must either cancel (case 1) or complete (case 2),
where qemu then sends a second event that actually ends the
job. However, until commit e6bcbcd, libvirt was blindly
assuming the semantics that apply to a commit of an
intermediate image, where there is only one sane conclusion
(the job automatically ends with fewer elements in the chain);
and getting stuck because it wasn't prepared for qemu to enter
a second phase of the job.
This patch adds a flag to the libvirt API that a user MUST
supply in order to acknowledge that they will be using two-phase
semantics. It might be possible to have a mode where if the
flag is omitted, we automatically do the case 2 semantics on
the user's behalf; but before that happens, I must do additional
patches to track the fact that we are doing an active commit
in the domain XML. Later patches will add support of the flag,
and once 2-phase semantics are working, we can then decide
whether to relax things to allow an omitted flag to cause an
automatic pivot.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_COMMIT_ACTIVE)
(VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT): New enums.
* src/libvirt.c (virDomainBlockCommit): Document two-phase job
when committing active layer, through new flag.
(virDomainBlockJobAbort): Document that pivot also occurs after
active commit.
* tools/virsh-domain.c (vshDomainBlockJob): Cover new job.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Explicitly
reject active copy; later patches will add it in.
Signed-off-by: Eric Blake <eblake@redhat.com>
Report CPU affinities / online CPUs in human-readable form when
this flag is present:
Before:
CPU Affinity: y-yy
After:
CPU Affinity: 0,2-3 (out of 4)
https://bugzilla.redhat.com/show_bug.cgi?id=985980
Our public free functions explicitly don't accept NULL pointers
(sigh). Therefore, callers must do something like this:
if (dev)
virNodeDeviceFree(dev);
And we are not doing that on two places I've found. This leads to
dummy error message thrown by virsh:
virsh # nodedev-dumpxml nonexistent-device
error: Could not find matching device 'nonexistent-device'
error: invalid node device pointer in virNodeDeviceFree
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When looking up storage volumes virsh uses multiple lookup steps. Some
of the steps don't require a pool name specified. This resulted into a
possibility that a volume would be part of a different pool than the
user specified:
Let's have a /var/lib/libvirt/images/test.qcow image in the 'default'
pool and a second pool 'emptypool':
Currently we'd return:
$ virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
Name: test.qcow
Type: file
Capacity: 100.00 MiB
Allocation: 212.00 KiB
After the fix:
$ tools/virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
error: Requested volume '/var/lib/libvirt/images/test.qcow' is not in pool 'emptypool'
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1088667
Commit d5c86278 was incomplete; other functions also triggered
compiler warnings about collisions in the use of 'sync'.
* src/qemu/qemu_driver.c (qemuDomainSetTime): Fix another client.
* tools/virsh-domain-monitor.c (cmdDomTime): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_ENUM_DECL/VIR_ENUM_IMPL helper macros already append 'Type'
to the enum name being converted; it looks silly to have functions
with 'TypeType' in their name. Even though some of our enums have
to have a 'Type' suffix, the corresponding string conversion
functions do not.
* src/conf/secret_conf.h (VIR_ENUM_DECL): Rename virSecretUsageType.
* src/conf/storage_conf.h (VIR_ENUM_DECL): Rename
virStoragePoolAuthType, virStoragePoolSourceAdapterType,
virStoragePartedFsType.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainFSDefParseXML, virDomainFSDefFormat): Update callers.
* src/conf/secret_conf.c (virSecretDefParseUsage)
(virSecretDefFormatUsage): Likewise.
* src/conf/storage_conf.c (virStoragePoolDefParseAuth)
(virStoragePoolDefParseSource, virStoragePoolSourceFormat):
Likewise.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDevices):
Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Likewise.
* src/util/virstorageencryption.c (virStorageEncryptionSecretParse)
(virStorageEncryptionSecretFormat): Likewise.
* tools/virsh-secret.c (cmdSecretList): Likewise.
* src/libvirt_private.syms (secret_conf.h, storage_conf.h): Export
corrected names.
Signed-off-by: Eric Blake <eblake@redhat.com>
These APIs are exposed under new virsh command 'domtime' which both gets
and sets (not at the same time of course :)).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For now, if only '--wipe-storage' is assigned, user can undefine a
domain normally. But actually '--wipe-storage' doesn't do anything,
and this may confuse user. Better is to require that '--wipe-storage'
only works if the user specifies volumes to be removed.
Before:
$ virsh undefine virt-tests-vm1 --wipe-storage
Domain virt-tests-vm1 has been undefined
After:
$ virsh undefine virt-tests-vm1 --wipe-storage
error: '--wipe-storage' requires '--storage <string>' or '--remove-all-storage'
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this
commit are related to storage (storage_conf) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 9976c4b9a6 broke the output for VNC
displays as the port number is converted to VNC display number by
subtracting 5900. This yields port 0 for the first display and thus the
output would be skipped.
Before:
$ virsh domdisplay VM
vnc://localhost
After:
$ tools/virsh domdisplay VM
vnc://localhost:0
The original comment of vshCmdInfo:
"name" - command name
Actually it's 'help' and the short description
of command, not the command name.
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
For now 'virsh quit' action like this:
--------------------------------
[root@localhost /]# virsh quit
[root@localhost /]#
--------------------------------
And 'virsh exit' action:
--------------------------------
[root@localhost /]# virsh exit
[root@localhost /]#
--------------------------------
There is a small difference('/n') between them.
According to manual said:
quit, exit
quit this interactive terminal
And in the code they all called cmdQuit func,
They should get same actions.
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
With this patch, all information related to a host resource in
a storage file backing chain now lives in util/virstoragefile.h.
The next step will be to consolidate various places that have
been tracking backing chain details to all use a common struct.
The changes to tools/Makefile.am were made necessary by the
fact that virstorageencryption includes uses of libxml, and is
now pulled in by inclusion from virstoragefile.h. No
additional libraries are linked into the final image, and in
comparison, the build of the setuid library in src/Makefile.am
already was using LIBXML_CFLAGS via AM_CFLAGS.
* src/conf/domain_conf.h (virDomainDiskSourceDef): Move...
* src/util/virstoragefile.h (virStorageSource): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourceDefClear)
(virDomainDiskAuthClear): Adjust clients.
* tools/Makefile.am (virt_login_shell_CFLAGS)
(virt_host_validate_CFLAGS): Add libxml headers.
Signed-off-by: Eric Blake <eblake@redhat.com>
'virsh help event' included a summary line "event - (null)"
due to a misnamed info field.
* tools/virsh-domain.c (info_event): Use correct name.
* tools/virsh-network.c (info_network_event): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use 'virsh list domain --title' option can get domain's title,
not description, the original help information 'show short
domain description' will confuse users, so modify it to
'show domain title'
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
This patch adds "[--format] <string>" to "virsh dump --memory-only", which is
changed to use the new virDomainCoreDumpWithFormat API.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Busy enterprise workloads hosted on large sized VM's tend to dirty
memory faster than the transfer rate achieved via live guest migration.
Despite some good recent improvements (& using dedicated 10Gig NICs
between hosts) the live migration may NOT converge.
Recently support was added in qemu (version 1.6) to allow a user to
choose if they wish to force convergence of their migration via a
new migration capability : "auto-converge". This feature allows for qemu
to auto-detect lack of convergence and trigger a throttle-down of the
VCPUs.
This patch includes the libvirt support needed to trigger this
feature. (Testing is in progress)
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When listening for a subset of monitor events, it can be tedious
to register for each event name in series; nicer is to register
for multiple events in one go. Implement a flag to use regex
interpretation of the event filter.
While at it, prove how much I hate the shift key, by adding a
way to filter for 'shutdown' instead of 'SHUTDOWN'. :)
* include/libvirt/libvirt-qemu.h
(virConnectDomainQemuMonitorEventRegisterFlags): New enum.
* src/libvirt-qemu.c (virConnectDomainQemuMonitorEventRegister):
Document flags.
* tools/virsh-domain.c (cmdQemuMonitorEvent): Expose them.
* tools/virsh.pod (qemu-monitor-event): Document this.
* src/conf/domain_event.c
(virDomainQemuMonitorEventStateRegisterID): Add flags.
(virDomainQemuMonitorEventFilter): Handle regex, and optimize
client side.
(virDomainQemuMonitorEventCleanup): Clean up regex.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any new API deserves a good virsh wrapper :)
qemu-monitor-event [<domain>] [<event>] [--pretty] [--loop] [--timeout <number>]
Very similar to the previous work on 'virsh event'. For an
example session:
$ virsh -c qemu:///system qemu-monitor-event --event SHUTDOWN&
$ virsh -c qemu:///system start f18-live
Domain f18-live started
$ virsh -c qemu:///system destroy f18-live
Domain f18-live destroyed
event SHUTDOWN at 1391212552.026544 for domain f18-live: (null)
events received: 1
[1]+ Done virsh -c qemu:///system qemu-monitor-event --event SHUTDOWN
$
* tools/virsh-domain.c (cmdQemuMonitorEvent): New command.
* tools/virsh.pod (qemu-monitor-event): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We allow translation from no_bandwidth to has_bandwidth for a vnic.
However, going in the opposite direction is not implemented. It's not
limitation of the API rather than internal implementation. The problem
is, we correctly detect that user hasn't specified any outbound (say
he wants to clear out outbound). However, this gets overwritten by
current vnic outbound settings. Then, virNetDevBandwidthSet doesn't
change anything. We need to stop overwriting the outbound if users
don't want us to. Same applies for inbound.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introducing keepalive similarly to Guannan around 2 years ago. Since
we want to introduce keepalive for every connection, it makes sense to
wrap the connecting function into new virsh one that can deal
keepalive as well.
Function vshConnect() is now used for connecting and keepalive added
in that function (if possible) helps preventing long waits e.g. while
nework goes down during migration.
This patch also adds the options for keepalive tuning into virsh and
fails connecting only when keepalives are explicitly requested and
cannot be set (whether it is due to missing support in connected
driver or remote server). If not explicitely requested, a debug
message is printed (hence the addition to virsh-optparse test).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073506
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=822839
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
vshRunConsole() uses virCondWait() which is a wrapper around
pthread_cond_wait(). On FreeBSD, pthread_cond_wait needs mutex to be
locked, otherwise it immediately fails with EPERM. On Linux, the
behaviour in this case is undefined.
So lock the mutex before calling virCondWait().
Coverity spotted that 'nfdlist' (ssize_t) could be -1, but that we
were using 'i' (size_t) to iterate over the list at cleanup, with
crashing results because it promotes to a really big unsigned number.
* tools/virt-login-shell.c (main): Avoid treating -1 as unsigned.
Signed-off-by: Eric Blake <eblake@redhat.com>
If a user specifies the pool explicitly, we should make sure to point
out that it's inactive instead of falling back to lookup by key/path and
failing at the end. Also if the pool isn't found there's no use in
continuing the lookup.
This changes the error in case the user-selected pool is inactive from:
$ virsh vol-upload --pool inactivepool --vol somevolname volcontents
error: failed to get vol 'somevolname'
error: Storage volume not found: no storage vol with matching path
somevolname
To a more descriptive:
$ virsh vol-upload --pool inactivepool --vol somevolname volcontents
error: pool 'inactivepool' is not active
And in case a user specifies an invalid pool from:
$ virsh vol-upload --pool invalidpool --vol somevolname volcontents
error: failed to get pool 'invalidpool'
error: failed to get vol 'somevolname', specifying --pool might help
error: Storage volume not found: no storage vol with matching path somevolname
To something less confusing:
$ virsh vol-upload --pool invalidpool --vol somevolname volcontents
error: failed to get pool 'invalidpool'
error: Storage pool not found: no storage pool with matching name 'invalidpool'
'virsh lxc-enter-namespace' does not have a way to reflect exit
status to the caller in single-command mode, but we might as well
at least report the exit status. Prior to this patch,
$ virsh -c lxc:/// lxc-enter-namespace shell /bin/sh 'exit 3'; echo $?
1
now it gives some details:
$ virsh -c lxc:/// lxc-enter-namespace shell /bin/sh -c 'exit 3'; echo $?
error: internal error: Child process (31557) unexpected exit status 3
1
Also useful:
$ virsh -c lxc:/// lxc-enter-namespace shell /bin/sh -c 'kill $$'; echo $?
error: internal error: Child process (31585) unexpected fatal signal 15
1
* tools/virsh-domain.c (cmdLxcEnterNamespace): Avoid magic numbers.
Dispatch any error.
* tools/virsh.pod: Document that non-zero exit status is collapsed.
Signed-off-by: Eric Blake <eblake@redhat.com>
virt-login-shell was exiting with status 0, regardless of what the
wrapped shell returned. This is unkind to users; we should behave
more like env(1), nice(1), su(1), and other wrapper programs, by
preserving the invoked application's status (which includes the
distinction between death due to signal vs. normal death).
* tools/virt-login-shell.c (main): Pass through child exit status.
* tools/virt-login-shell.pod: Document exit status.
Signed-off-by: Eric Blake <eblake@redhat.com>
Note that 'virsh lxc-enter-namespace' must double-fork, for two
reasons: some namespaces can only be done from a single thread,
while virsh is multithreaded; and because virsh can be run in
batch mode where we must not corrupt the namespace of that
execution upon return from the subsidiary command.
When virt-login-shell was first written, it blindly copied from
'virsh lxc-enter-namespace', including the double-fork. But
neither of the reasons for double forking apply to
virt-login-shell (we are single-threaded, and we have nothing to
do after the child completes that would require us to preserve a
namespace), so we can simplify life by using a single fork.
In turn, this will make it easier for a future patch to pass the
child's exit status on to the invoking shell.
In flattening to a single fork, note that closing the fds must
be done after fork, because the parent process still needs to
use fds to control the virConnectPtr; meanwhile, chdir can be
done prior to forking (in fact, it's easier to report errors
on anything attempted before forking).
* tools/virt-login-shell.c (main): Single rather than double fork.
(virLoginShellFini): Delete, by inlining actions instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
The old semantics of virFork() violates the priciple of good
usability: it requires the caller to check the pid argument
after use, *even when virFork returned -1*, in order to properly
abort a child process that failed setup done immediately after
fork() - that is, the caller must call _exit() in the child.
While uses in virfile.c did this correctly, uses in 'virsh
lxc-enter-namespace' and 'virt-login-shell' would happily return
from the calling function in both the child and the parent,
leading to very confusing results. [Thankfully, I found the
problem by inspection, and can't actually trigger the double
return on error without an LD_PRELOAD library.]
It is much better if the semantics of virFork are impossible
to abuse. Looking at virFork(), the parent could only ever
return -1 with a non-negative pid if it misused pthread_sigmask,
but this never happens. Up until this patch series, the child
could return -1 with non-negative pid if it fails to set up
signals correctly, but we recently fixed that to make the child
call _exit() at that point instead of forcing the caller to do
it. Thus, the return value and contents of the pid argument are
now redundant (a -1 return now happens only for failure to fork,
a child 0 return only happens for a successful 0 pid, and a
parent 0 return only happens for a successful non-zero pid),
so we might as well return the pid directly rather than an
integer of whether it succeeded or failed; this is also good
from the interface design perspective as users are already
familiar with fork() semantics.
One last change in this patch: before returning the pid directly,
I found cases where using virProcessWait unconditionally on a
cleanup path of a virFork's -1 pid return would be nicer if there
were a way to avoid it overwriting an earlier message. While
such paths are a bit harder to come by with my change to a direct
pid return, I decided to keep the virProcessWait change in this
patch.
* src/util/vircommand.h (virFork): Change signature.
* src/util/vircommand.c (virFork): Guarantee that child will only
return on success, to simplify callers. Return pid rather than
status, now that the situations are always the same.
(virExec): Adjust caller, also avoid open-coding process death.
* src/util/virprocess.c (virProcessWait): Tweak semantics when pid
is -1.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/virfile.c (virFileAccessibleAs, virFileOpenForked)
(virDirCreate): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself. But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status. This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.
* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Similar to our event-test demo program, it's nice to be able to
have a mode where we can sniff all events at once, rather than
having to spawn multiple virsh in parallel with one for each
event type.
(Can I just say our RegisterAny design is lousy? The fact that
the majority of our callback pointers have a function signature
with the opaque data in a different position, and that we have
to cast the function signature before registering it, makes it
hard to write a generic callback function; we have to write one
for every type of event id. Life would have been easier if we
had designed the callback as a fixed signature with a void*
and size parameter, and then allowed the caller to downcast
the void* to a particular struct for data specific to their
callback id, where we could have then had a single function
with a switch statement for each event id, and register that
one function for all types of events. It would also be nicer
if the callback functions knew which callbackID was being used
when invoking that callback, so that I could use a common data
structure among all registrations instead of having to create
an array of one data per callback. But I really don't want to
go add yet another event API design.)
* tools/virsh-domain.c (cmdEvent): Add --all parameter; convert
all callbacks to support shared counter.
* tools/virsh.pod (event): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Earlier, I added 'virsh event' for lifecycle events, to get the
concept approved; this patch finishes the support for all other
events, although the user still has to register for one event
type at a time. A future patch may add an --all parameter to
make it possible to register for all events through a single
call.
* tools/virsh-domain.c (vshDomainEventWatchdogToString)
(vshDomainEventIOErrorToString, vshGraphicsPhaseToString)
(vshGraphicsAddressToString, vshDomainBlockJobStatusToString)
(vshDomainEventDiskChangeToString)
(vshDomainEventTrayChangeToString, vshEventGenericPrint)
(vshEventRTCChangePrint, vshEventWatchdogPrint)
(vshEventIOErrorPrint, vshEventGraphicsPrint)
(vshEventIOErrorReasonPrint, vshEventBlockJobPrint)
(vshEventDiskChangePrint, vshEventTrayChangePrint)
(vshEventPMChangePrint, vshEventBalloonChangePrint)
(vshEventDeviceRemovedPrint): New helper routines.
(cmdEvent): Support full array of event callbacks.
Signed-off-by: Eric Blake <eblake@redhat.com>
If user wants to grep some info from domain, e.g. disk paths:
# virsh -q domblklist win7 | awk '{print $2}'
Source
/var/lib/libvirt/images/windows.qcow2
/home/zippy/work/tmp/en_windows_7_professional_x64_dvd_X15-65805.iso
while with my change:
# virsh -q domblklist win7 | awk '{print $2}'
/var/lib/libvirt/images/windows.qcow2
/home/zippy/work/tmp/en_windows_7_professional_x64_dvd_X15-65805.iso
We don't print table header in other commands, like list.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I noticed this while shortening switch statements via VIR_ENUM.
Basically, the only ways virAsprintf can fail are if we pass a
bogus format string (but we're not THAT bad) or if we run out
of memory (but it already warns on our behalf in that case).
Throw away the cruft that tries too hard to diagnose a printf
failure.
* tools/virsh-volume.c (cmdVolList): Simplify.
* tools/virsh-pool.c (cmdPoolList): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Dan Berrange suggested that using VIR_ENUM_IMPL is more compact
than open-coding switch statements, and still just as forceful
at making us remember to update lists if we add enum values
in the future. Make this change throughout virsh.
Sure enough, doing this change caught that we missed at least
VIR_STORAGE_VOL_NETDIR.
* tools/virsh-domain-monitor.c (vshDomainIOErrorToString)
(vshDomainControlStateToString, vshDomainStateToString)
(vshDomainStateReasonToString): Change switch to enum lookup.
(cmdDomControl, cmdDominfo): Update caller.
* tools/virsh-domain.c (vshDomainVcpuStateToString)
(vshDomainEventToString, vshDomainEventDetailToString): Change
switch to enum lookup.
(vshDomainBlockJobToString, vshDomainJobToString): New functions.
(cmdVcpuinfo, cmdBlockJob, cmdDomjobinfo, cmdEvent): Update
callers.
* tools/virsh-network.c (vshNetworkEventToString): Change switch
to enum lookup.
* tools/virsh-pool.c (vshStoragePoolStateToString): New function.
(cmdPoolList, cmdPoolInfo): Update callers.
* tools/virsh-volume.c (vshVolumeTypeToString): Change switch to
enum lookup.
(cmdVolInfo, cmdVolList): Update callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
I've noticed that in some cases systemd was quick enough and even
if libvirt-guests.service is marked to be started after the
libvirtd.service my guests were not resumed as
libvirt-guests.sh failed to connect. This is because of a
simple fact: systemd correctly starts libvirt-guests after it
execs libvirtd. However, the daemon is not able to accept
connections right from the start. It's doing some
initialization which may take ages. This problem is not limited
to systemd only, indeed. Any init system that is able to startup
services in parallel (e.g. OpenRC) may run into this situation.
The fix is to try connecting not only once, but continuously a few
times with a small sleep in between tries.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add 'virsh net-event --list' and 'virsh net-event [net] --event=name
[--loop] [--timeout]'. Very similar to 'virsh event'.
* tools/virsh.pod (net-event): Document new command.
* tools/virsh-network.c (vshNetworkEventToString, vshNetEventData)
(vshEventLifecyclePrint, cmdNetworkEvent): New struct and
functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add 'virsh event --list' and 'virsh event [dom] --event=name
[--loop] [--timeout]'. Borrows somewhat from event-test.c,
but defaults to a one-shot notification, and takes advantage
of the event loop integration to allow Ctrl-C to interrupt the
wait for an event. For now, this just does lifecycle events.
* tools/virsh.pod (event): Document new command.
* tools/virsh-domain.c (vshDomainEventToString)
(vshDomainEventDetailToString, vshDomEventData)
(vshEventLifecyclePrint, cmdEvent): New struct and functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
I plan to add 'virsh event' to virsh-domain.c and 'virsh
net-event' to virsh-network.c; but as they will share quite
a bit of common boilerplate, it's better to set that up now
in virsh.c.
* tools/virsh.h (_vshControl): Add fields.
(vshEventStart, vshEventWait, vshEventDone, vshEventCleanup): New
prototypes.
* tools/virsh.c (vshEventFd, vshEventOldAction, vshEventInt)
(vshEventTimeout): New helper variables and functions.
(vshEventStart, vshEventWait, vshEventDone, vshEventCleanup):
Implement new functions.
(vshInit, vshDeinit, main): Manage event timeout.
Signed-off-by: Eric Blake <eblake@redhat.com>
Several virsh commands ask for a --timeout parameter in
seconds, then use it to control interfaces that operate on
millisecond limits; I also plan on adding a 'virsh event'
command that also does this. Factor this into a common
function.
* tools/virsh.h (vshCommandOptTimeoutToMs): New prototype.
* tools/virsh.c (vshCommandOptTimeoutToMs): New function.
* tools/virsh-domain.c (cmdBlockCommit, cmdBlockCopy)
(cmdBlockPull, cmdMigrate): Use it.
(vshWatchJob): Adjust timeout scale.
Signed-off-by: Eric Blake <eblake@redhat.com>
Recent autotest/virt-test testing on f20 discovered an anomaly in how
the bandwidth options are documented and used. This was discovered due
to a bug fix in the /sbin/tc utility found in iproute-3.11.0.1 (on f20)
in which overflow was actually caught and returned as an error. The fix
was first introduced in iproute-3.10 (search on iproute2 commit 'a303853e').
The autotest/virt-test test for virsh domiftune was attempting to send
the largest unsigned integer value (4294967295) for maximum value
testing. The libvirt xml implementation was designed to manage values
in kilobytes thus when this value was passed to /sbin/tc, it (now)
properly rejected the 4294967295kbps value.
Investigation of the problem discovered that formatdomain.html.in and
formatnetwork.html.in described the elements and property types slightly
differently, although they use the same code - virNetDevBandwidthParseRate()
(shared by portgroups, domains, and networks xml parsers). Rather than
have the descriptions in two places, this patch will combine and reword
the description under formatnetwork.html.in and have formatdomain.html.in
link to that description.
This documentation faux pas was continued into the virsh man page where
the bandwidth description for both 'attach-interface' and 'domiftune'
did not indicate the format of each value, thus leading to the test using
largest unsigned integer value assuming "bps" rather than "kbps", which
ultimately was wrong.
And provide domain summary stat in that case, for lxc backend.
Use case is a container inheriting all devices from the host,
e.g. when doing application containerization.
When start a guest with --pass-fd, if the argument of --pass-fd is invalid,
virsh will exit, but doesn't free the variable 'dom'.
The valgrind said:
...
==24569== 63 (56 direct, 7 indirect) bytes in 1 blocks are definitely lost in loss record 130 of 234
==24569== at 0x4C2A1D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24569== by 0x4E879A4: virAllocVar (viralloc.c:544)
==24569== by 0x4EBD625: virObjectNew (virobject.c:190)
==24569== by 0x4F3A18A: virGetDomain (datatypes.c:226)
==24569== by 0x4F9311F: remoteDomainLookupByName (remote_driver.c:6636)
==24569== by 0x4F44F20: virDomainLookupByName (libvirt.c:2277)
==24569== by 0x12F616: vshCommandOptDomainBy (virsh-domain.c:105)
==24569== by 0x131C79: cmdStart (virsh-domain.c:3330)
==24569== by 0x12C4AB: vshCommandRun (virsh.c:1752)
==24569== by 0x127001: main (virsh.c:3218)
https://bugzilla.redhat.com/show_bug.cgi?id=1067338
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
For pool which relies on remote resources, such as a "iscsi" type
pool, since how long it takes to export the corresponding devices
to host's sysfs is really depended, it could depend on the network
connection, it also could depend on the host's udev procedures. So
it's likely that the volumes are not able to be detected during pool
starting process, polling the sysfs doesn't work, since we don't
know how much time is best for the polling, and even worse, the
volumes could still be not detected or partly not detected even after
the polling. So we end up with a documentation to prompt the fact,
in virsh manual.
And as a small improvement, let's explicitly say no LUNs found in
the debug log in that case.
Explicitly lists the possible values for "--target" option;
Gets rid of the confused strings like "Suspend-to-RAM";
Emphasises the node *has to* be suspended in the time duration
specified by "--duration". And rewords the entire document a
bit according to the API's implementation and document.
I noticed this problem when adding systemd support to netcf, because I
setup the configure.ac to automatically prefer using systemd over
initscripts when possible - although I had copied the
install-data-local target from the example of libvirt's
"libvirt-guests" service more or less verbatim, "make distcheck" would
fail because it was trying to install the service file directly into
/lib/systemd/system rather than into
/home/user/some/unimportant/name/lib/systemd/system.
This is caused by the install/uninstall rules for the systemd unit
files relying on $(DESTDIR) pointing the installed files to the right
place, but in reality $(DESTDIR) is empty during this part of make
distcheck - it instead sets $(prefix) with the toplevel directory used
for its test build/install/uninstall cycle.
(This problem hasn't been seen when running "make distcheck" in
libvirt because libvirt will never build/install systemd support
unless explicitly told to do so on the configure commandline, and
"make distcheck" doesn't put the "--with-initscript=..." option on the
configure commandline.)
I verified that the same problem does exist in libvirt by modifying
libvirt's configure.ac to set:
init_systemd=yes
with_init_script=systemd+redhat
This forces a build/install of the systemd unit files during
distcheck, which yields an error like this:
/usr/bin/install -c -m 644 virtlockd.service \
/lib/systemd/system/
libtool: install: warning: relinking `libvirt-qemu.la'
/usr/bin/install: cannot remove '/lib/systemd/system/virtlockd.service': Permission denied
make[4]: *** [install-systemd] Error 1
After adding $(prefix) to all the definitions of SYSTEMD_UNIT_DIR,
make distcheck now completes successfully with the modified
configure.ac, and the above lines change to something like this:
/usr/bin/install -c -m 644 virtlockd.service \
/home/laine/devel/libvirt/libvirt-1.2.1/_inst/lib/systemd/system/
Introduce Wireshark dissector plugin which adds support to Wireshark
for dissecting libvirt RPC protocol.
Added following files to build Wireshark dissector from libvirt source
tree.
* tools/wireshark/*: Source tree of Wireshark dissector plugin.
Added followings to configure.ac or Makefile.am.
configure.ac
* --with-wireshark-dissector: Enable support for building Wireshark
dissector.
* --with-ws-plugindir: Specify wireshark plugin directory that dissector
will installed.
* Added tools/wireshark/{Makefile,src/Makefile} to AC_CONFIG_FILES.
Makefile.am
* Added tools/wireshark/ to SUBDIR.
With this patch, user can setup the throttle blkio cgorup
for domain through the virsh cmd, such as:
virsh blkiotune domain1 --device-read-bytes-sec /dev/sda1,1000000,/dev/sda2,2000000
--device-write-bytes-sec /dev/sda1,1000000 --device-read-iops-sec /dev/sda1,10000
--device-write-iops-sec /dev/sda1,10000,/dev/sda2,0
This patch also add manpage for these new options.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
In a "for" loop there are created two new strings and they may not
be freed if a "target" string cannot be obtained. We have to free
the two created strings to prevent the memory leak.
This has been found by coverity.
John also pointed out that we should somehow care about the "type"
and "device" and Osier agreed to exit with error message if one of
them is set to NULL.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Our fixes for CVE-2013-4400 were so effective at "fixing" bugs
in virt-login-shell that we ended up fixing it into a useless
do-nothing program.
Commit 3e2f27e1 picked the name LIBVIRT_SETUID_RPC_CLIENT for
the witness macro when we are doing secure compilation. But
commit 9cd6a57d checked whether the name IN_VIRT_LOGIN_SHELL,
from an earlier version of the patch series, was defined; with
the net result that virt-login-shell invariably detected that
it was setuid and failed virInitialize.
Commit b7fcc799 closed all fds larger than stderr, but in the
wrong place. Looking at the larger context, we mistakenly did
the close in between obtaining the set of namespace fds, then
actually using those fds to switch namespace, which means that
virt-login-shell will ALWAYS fail.
This is the minimal patch to fix the regressions, although
further patches are also worth having to clean up poor
semantics of the resulting program (for example, it is rude to
not pass on the exit status of the wrapped program back to the
invoking shell).
* tools/virt-login-shell.c (main): Don't close fds until after
namespace swap.
* src/libvirt.c (virGlobalInit): Use correct macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1049529
The 'detach-disk' command in virsh used the active XML definition of a
domain even when attempting to remove a disk from the config only. If
the disk was only in the inactive definition the operation failed. Fix
this by using the inactive XML in case that only the config is affected.
https://bugzilla.redhat.com/show_bug.cgi?id=1049529
The legacy virDomainAttachDevice and virDomainDetachDevice operate only
on active domains. When a user specified --current flag with an inactive
domain the old API was used and reported an error. Fix it by calling the
new API if --current is specified explicitly.
