log stderr and stdout from nbdkit into its own log so that
nbdkit-related issues can be debugged more easily.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This code can be used by the nbdkit implementation for reading back
filtered log data for error reporting. Move it to qemuLogContext so that
it can be shared. Renamed to qemuLogContextReadFiltered().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow us to use it for nbdkit logging in upcoming commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Allow to specify a basename for the log file so that
qemuDomainLogContextNew() can be used to create log contexts for
secondary loggers.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add some helper functions to build a virCommand object and run the
nbdkit process for a given virStorageSource.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Rather than hard-coding the nbdkit module directory, query the nbdkit
binary for the location to these directories. nbdkit provides a
--dump-config optiont that outputs this information and can be easily
parsed. We can also get the version from this output rather than
executing `nbdkit --version` separately.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
An object for storing information about a nbdkit process that is serving
a specific virStorageSource. At the moment, this information is just
stored in the private data of virStorageSource and not used at all.
Future commits will use this data to actually start a nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add the virFileCache implementation for nbdkit capabilities to the qemu
driver. This allows us to determine whether nbdkit is installed and
which plugins are supported. it also has persistent caching and the
capabilities are re-queried whenever something changes.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Implement the loadFile and saveFile virFileCacheHandlers callbacks so
that nbdkit capabilities are cached perstistently across daemon
restarts. The format and implementation is modeled on the qemu
capabilities, but simplified slightly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Preparatory step for caching nbdkit capabilities. This patch implements
the newData and isValid virFileCacheHandlers callback functions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to add caching of the nbdkit capabilities, we will need to
compare against file modification times, etc. So look up this
information when creating the nbdkit caps.
Add a nbdkit_moddir build option to allow the builder to specify the
location to look for nbdkit plugins and filters.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In future commits, we will optionally use nbdkit to serve some remote
disk sources. This patch queries to see whether nbdkit is installed on
the host and queries it for capabilities. The data will be used in later
commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are few places where the following pattern occurs:
if (var)
other = g_strdup(var);
where @other wasn't initialized before g_strdup(). Checking for
var != NULL is useless in this case, as that's exactly what
g_strdup() does (in which case it returns NULL).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parsers to use
virXMLPropEnumDefault().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, adjust the XML parsers to use virXMLPropEnum()
and fill in missing cases to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parsers to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and fill in missing cases to switch()
statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, and fill in missing cases to switch()
statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, adjust the XML parser to use
virXMLPropEnumDefault() and fill in missing cases to switch()
statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parser to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'bus' member of _virDomainDiskDef is already declared of
virDomainDiskModel type. Hence, there is no need to typecast the
variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'mode' member of _virDomainDiskDef is already declared of
virDomainDiskModel type. Hence, there is no need to typecast the
variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'type' member of _virDomainDeviceDef is already declared of
virDomainDeviceType type. Hence, there is no need to typecast the
variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'fsdriver' member of _virDomainFSDef is already declared of
virDomainFSDriverType type. Hence, there is no need to typecast
the variable when passing to switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Inside of qemuDomainDeviceCalculatePCIConnectFlags() there's a
switch() which typecasts a variable of
virDomainHostdevSubsysSCSIVHostModelType type to the very same
type. This is useless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Requires recent qemu with support for the virtio-blk-vhost-vdpa device
and the ability to pass a /dev/fdset/N path for the vdpa path (8.1.0)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1900770
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
vDPA block devices will also need the same consideration for memlock
limits as other vdpa devices, so consider these devices when calculating
memlock limits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemuInterfaceVDPAConnect() was a helper function for connecting to the
vdpa device file. But in order to support other vdpa devices besides
network interfaces (e.g. vdpa block devices) make this function a bit
more generic.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Check whether the qemu binary supports the vdpa block driver. We can't
rely simply on the existence of the virtio-blk-vhost-vdpa block driver
since the first releases of qemu didn't support fd-passing for this
driver. So we have to check for the 'fdset' feature on the driver
object. This feature will be present in the qemu 8.1.0 release and was
merged to qemu in commit 98b126f5.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function was used only to fill the cpu models into fake
capabilities, whic no longer exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's no longer needed in tests as we are no longer adding fake machines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virQEMUCapsAddCPUDefinitions' is used solely to populate fake cpu
models for the fake-caps tests. Note that and also populate the 'type'
field so that default cpu type can be propagated properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'display' option for the 'vfio-pci' device was added in qemu-2.12
and can't be compiled out. Assume support for the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions have this feature and it can't be compiled
out. The logic is a bit more complex in this instance as the flag is
asserted if:
if (ARCH_IS_X86(qemuCaps->arch) &&
virQEMUCapsGet(qemuCaps, QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION)) {
virQEMUCapsSet(qemuCaps, QEMU_CAPS_CPU_CACHE);
}
Now QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION is available since qemu-2.8 but
only on certain architectures, thus we need to keep the flag itself, but
x86_64 is one of them.
The flag can be also assumed as qemuValidateDomainDefCpu rejects any
cache config on non-x86 arches.
Remove any use of the capability and drop the impossible test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internally the preferred machine which is 'pc' for x86_64 must be kept
in the first place in the array of machines. This was not the case when
stripping the machine aliases for use in tests (so that test output
stays stable) where we've created a new entry for the alias. This means
that the original name (e.g. pc-i440fx-8.1) stayed in the first place.
To fix this we now swap the names around and create a new entry at the
end for the specific type. Additionally the default flag is not
propagated to the copy.
This is also visible now in the output of 'qemuxml2xmltest' as the test
cases which use the default machine type return to 'pc' instead of the
more specific name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for PIIX power management was added in qemu commit
v1.0-3094-g459ae5ea5a and the suport for ICH9 power management was added
in qemu commit v2.2.0-542-g6ac0d8d44c and both can't be compiled out.
This means we can always assume support for these features. Remove the
validation and impossible tests. Move relevant bits from
'q35-pm-disable' to 'q35' test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The filtering of qemu capabilities by machine type doesn't seem to be
ever used, remove it and adjust callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All qemu versions have that command and cpu hotplug code now directly
probes the machine type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS flag is always asserted as all
qemu versions support the command and selectively cleared when copying
the capabilities for VM use if given machine type does not support cpu
hotplug.
Rework this to directly probe the machine as we now populate the data
also when re-connecting to a qemu instance after daemon restart, so that
the capability can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When reconnecting we populate only the capability flags from the XML as
we need to know the exact flags that were present when starting the VM.
On the other hand the machine type data is not stored as it wasn't
really used after startup. While storing all of the data into the status
XML would be theoretically possible, with machine-type specific data it
makes no sense to do so, and thus the data can be re-probed from the
current instance.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will re-probe machines from the current qemu instance to
populate the private copy of qemuCaps after reconnecting to a running
instance. This is needed to be able to access the machine type data,
while storing them in the status XML seems to be an overkill, for
information which can be easily reprobed.
Export 'virQEMUCapsInitQMPArch' needed to populate the 'arch' field and
'virQEMUCapsProbeQMPMachineTypes'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support for legacy cpu hotplug was removed a long time ago. At this
point this function only checks whether the current machine type
supports cpu hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reverting external snapshot for running VM doesn't work correctly so we
should not report this capability until it is fixed.
This reverts commit de71573bfe.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit adds building of `discard_granularity` disk option
for qemu commandline.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1849570
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This introduces the ability to set the discard granularity option
for a disk. It defines the smallest amount of data that can be
discarded in a single operation (useful for managing and
optimizing storage).
However, most hypervisors automatically set the proper discard
granularity and users usually do not need to change the default
setting.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Normally I wouldn't bother with a change like this, but I was touching
the function anyway, and wanted to leave it looking nice and tidy.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the past, the only allowable values for the "driver" field of
virNodeDeviceDetachFlags() were "kvm" or "vfio" for the QEMU driver,
and "xen" for the libxl driver. Then "kvm" was deprecated and removed,
so the driver name became essentially irrelevant (because it is always
called via a particular hypervisor driver, and so the "xen" or "vfio"
can be (and almost always is) implied.
With the advent of VFIO variant drivers, the ability to explicitly
specify a driver name once again becomes useful - it can be used to
name the exact VFIO driver that we want bound to the device in place
of vfio-pci, so this patch allows those other names to be passed down
the call chain, where the code in virpci.c can make use of them.
The names "vfio", "kvm", and "xen" retain their special meaning, though:
1) because there may be some application or configuration that still
calls virNodeDeviceDetachFlags() with driverName="vfio", this
single value is substituted with the synonym of NULL, which means
"bind the default driver for this device and hypervisor". This
will currently result in the vfio-pci driver being bound to the
device.
2) in the case of the libxl driver, "xen" means to use the standard
driver used in the case of Xen ("pciback").
3) "kvm" as a driver name always results in an error, as legacy KVM
device assignment was removed from the kernel around 10 years ago.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since commit baca59a538 the NUMA definition is automatically fixed if
the vCPU count mismatches the NUMA cpu count so that this warning will
never be triggered.
Additionally VIR_WARN of a misconfiguration of a VM would not really
be seen in most cases as it's only simply logged.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As advertised earlier, now that the _virDomainMemoryDef struct is
cleaned up, we can shorten some names as their placement within
unions define their use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The _virDomainMemoryDef struct is getting a bit messy. It has
various members and only some of them are valid for given model.
Worse, some are re-used for different models. We tried to make
this more bearable by putting a comment next to each member
describing what models the member is valid for, but that gets
messy too.
Therefore, do what we do elsewhere: introduce an union of structs
and move individual members into their respective groups.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The _virDomainMemoryDef struct is getting a bit messy. It has
various members and only some of them are valid for given model.
Worse, some are re-used for different models. We tried to make
this more bearable by putting a comment next to each member
describing what models the member is valid for, but that gets
messy too.
Therefore, do what we do elsewhere: introduce an union of structs
and move individual members into their respective groups.
This allows us to shorten some names (e.g. nvdimmPath or
sourceNodes) as their purpose is obvious due to their placement.
But to make this commit as small as possible, that'll be
addressed later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When guest acknowledges change in size of virtio-mem (portion
that's exposed to the guest), QEMU emits
MEMORY_DEVICE_SIZE_CHANGE event. We process it in
processMemoryDeviceSizeChange(). So far, QEMU emits the even only
for virtio-mem (as that's the only memory device model that
allows live changes to its size). Nevertheless, if this ever
changes, validate the memory model upon processing the event as
the rest of the code blindly expects virtio-mem model.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuDomainChangeMemoryLiveValidateChange() function is called
when a live memory device change is requested (via
virDomainUpdateDeviceFlags()). Currently, the only model that is
allowed to change is VIRTIO_MEM (and the only value that's
allowed to change is requestedsize). The aim of the function is
to check whether the change user requested follows this rule. And
in accordance with defensive programming I made the function
check all virDomainMemoryDef struct members. Even those which are
unused for VIRTIO_MEM model.
Drop these checks as the respective members will be inaccessible
soon (as the struct is refined).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of v7.9.0-rc1~296 users have ability to adjust what portion of
virtio-mem is exposed to the guest. Then, as of v9.4.0-rc2~5 they
have ability to set address where the memory is mapped. But due
to a missing check it was possible to feed
virDomainUpdateDeviceFlags() API with memory device XML that
changes the address. This is of course not possible and should be
forbidden. Add the missing check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since its introduction in 4d1b771fbb
it has only been used to differentiate between START and non-START.
Last use of QEMU_DOMAIN_LOG_CONTEXT_MODE_ATTACH was removed by:
commit f709377301
qemu: Fix qemuDomainObjTaint with virtlogd
QEMU_DOMAIN_LOG_CONTEXT_MODE_STOP is unused since:
commit cf3ea0769c
qemu: process: Append the "shutting down" message using the new APIs
Now, the only caller passes QEMU_DOMAIN_LOG_CONTEXT_MODE_START.
Assume that's always the case and remove the 'mode' argument.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the support to revert external snapshots is implemented we can
drop this check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With the introduction of external snapshot revert support we need to
error out in some cases when trying to delete some snapshots.
If users reverts to non-leaf snapshots and would try to delete it after
the revert is done it would not work currently as this operation would
require using block-stream which is not implemented for now as in this
case the snapshot has two children so the disk files have multiple
overlays.
Similarly if user reverts to non-leaf snapshot and would try to delete
snapshot that is non-leaf but not in currently active snapshot chain we
would still need to use block-commit operation. The issue here is that
in order to do that we would have to start new qemu process with
different domain definition than what is currently used by the domain.
If the current domain would be running it would complicate things even
more so this operation is not yet supported.
If user creates new snapshot after reverting to non-leaf snapshot it
creates a new branch. Deleting snapshot with multiple children will
require block-stream which is not implemented for now.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There will be more external snapshot checks introduced by following
patch so group them together.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With introduction of external snapshot revert we will have to update
backing store of qcow images not actively used be QEMU manually.
The need for this patch comes from the fact that we stop and start QEMU
process therefore after revert not all existing snapshots will be known
to that QEMU process due to reverting to non-leaf snapshot or having
multiple branches.
We need to loop over all existing snapshots and check all disks to see
if they happen to have the image we are deleting as backing store and
update them to point to the new image except for images currently used
by the running QEMU process doing the merge operation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We only need the domain definition from domain object. This will allow
us to use it from snapshot code where we need to pass different domain
definition.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When user creates a new snapshot after reverting to non-leaf snapshot we
no longer need to store the temporary overlays as they will be part of
the VM XMLs stored in the newly created snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When deleting external snapshot and parent snapshot is the currently
active snapshot as user reverted to it we need to properly update the
parent snapshot metadata.
After the delete is done the new overlay files will be the currently
used files created when snapshot revert was done, replacing the original
overlay files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When block commit is not needed we can just simply unlink the
disk files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In this case there is no need to run block commit and using qemu process
at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Before external snapshot revert every delete operation did block commit
in order to delete a snapshot. But now when user reverts to non-leaf
snapshot deleting leaf snapshot will not have any overlay files so we
can just simply delete the snapshot images.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This part of code is about to grow to make deletion work when user
reverts to non-leaf snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The new name reflects that we prepare data for external snapshot
deletion and the old name will be used later for different part of code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When reverting to external snapshot we need to create new overlay qcow2
files from the disk files the VM had when the snapshot was taken.
There are some specifics and limitations when reverting to a snapshot:
1) When reverting to last snapshot we need to first create new overlay
files before we can safely delete the old overlay files in case the
creation fails so we have still recovery option when we error out.
These new files will not have the suffix as when the snapshot was
created as renaming the original files in order to use the same file
names as when the snapshot was created would add unnecessary
complexity to the code.
2) When reverting to any snapshot we will always create overlay files
for every disk the VM had when the snapshot was done. Otherwise we
would have to figure out if there is any other qcow2 image already
using any of the VM disks as backing store and that itself might be
extremely complex and in some cases impossible.
3) When reverting from any state the current overlay files will be
always removed as that VM state is not meant to be saved. It's the
same as with internal snapshots. If user want's to keep the current
state before reverting they need to create a new snapshot. For now
this will only work if the current snapshot is the last.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Both creating and deleting snapshot are using VIR_ASYNC_JOB_SNAPSHOT but
reverting is using VIR_ASYNC_JOB_START. Let's unify it to make it
consistent for all snapshot operations.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We will need to reuse the functionality when reverting external
snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To create new overlay files when external snapshot revert support is
introduced we will be using different domain definition than what is
currently used by the domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract creation of qcow2 files for external snapshots to separate
function as we will need it for external snapshot revert code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When creating external snapshot this function is called only when the VM
is not running so there is only one definition to care about. However,
it will be used by external snapshot revert code for active and inactive
definition and they may be different if a disk was (un)plugged only for
the active or inactive definition.
The current code would crash so use virDomainDiskByName() to get the
correct disk from the domain definition based on the disk name and make
sure it exists.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract the code that updates disks in domain definition while creating
external snapshots. We will use it later in the external snapshot revert
code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This new option will be used by external snapshot revert code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemu removed the support for the old 'ivshmem' device in 4.0 release.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The device was removed in qemu-4.0 and is superseded by 'ivshmem-plain'
and 'ivshmem-doorbell'.
Always report error when the old version is used and drop the irrelevant
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we've used QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS as witness
that the topology must cover the maximum number ov vcpus. qemu started
to enforce this in qemu-2.5, thus we can now always do the check.
This change also requires aligning the topology in certain test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Due to the way the information is stored by the XML parser, we've
had this quirk where specifying any information about the loader
or NVRAM would implicitly set its format to raw. That is,
<nvram>/path/to/guest_VARS.fd</nvram>
would effectively be interpreted as
<nvram format='raw'>/path/to/guest_VARS.fd</nvram>
forcing the use of raw format firmware even when qcow2 format
would normally be preferred based on the ordering of firmware
descriptors. This behavior can be worked around in a number of
ways, but it's fairly unintuitive.
In order to remove this quirk, move the selection of the default
firmware format from the parser down to the individual drivers.
Most drivers only support raw firmware images, so they can
unconditionally set the format early and be done with it; the
QEMU driver, however, supports multiple formats and so in that
case we want this default to be applied as late as possible,
when we have already ruled out the possibility of using qcow2
formatted firmware images.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Keep things consistent by using the same file extension for the
generated NVRAM path as the NVRAM template.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the user included loader.readonly=no in the domain XML, we
should not pick a firmware build that expects to work with
loader.readonly=yes.
https://bugzilla.redhat.com/show_bug.cgi?id=2196178
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now, we only generate it after finding a matching entry
either among firmware descriptors or in the legacy firmware
list.
Even if the domain is configured to use a custom firmware build
that we know nothing about, however, we should still automatically
generate the NVRAM path instead of requiring the user to provide
it manually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Just like the more common split builds, these are of type
QEMU_FIRMWARE_DEVICE_FLASH; however, they have no associated
NVRAM template, so we can't access the corresponding structure
member unconditionally or we'll trigger a crash.
https://bugzilla.redhat.com/show_bug.cgi?id=2196178
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The documentation states that, just like the Modern() variant,
this function should return 1 if a match wasn't found. It
currently doesn't do that, and returns 0 instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In mu previous commits I've moved internals of
qemuDomainChrDefDropDefaultPath() into a separate function
(qemuDomainChrMatchDefaultPath()) but forgot to remove @buf and
@regexp variables which are now unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For historical reasons (i.e. unknown reason) we put channel
sockets into a path derived from cfg->libDir which is a path that
survives host reboots (e.g. /var/lib/libvirt/...). This is not
necessary and in fact for session daemon creates a longer prefix:
XDG_CONFIG_HOME -> /home/user/.config
XDG_RUNTIME_DIR -> /run/user/1000
Worse, if host is rebooted suddenly (e.g. due to power loss) then
we leave files behind and nobody will ever remove them.
Therefore, place the channel target dir into state dir.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2173980
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A <channel/> device is basically an UNIX socket into guest.
Whatever is sent from the host, appears in the guest and vice
versa. But because of that, the length of the path to the socket
is important (underscored by fact that we derive the path from
domain short name). But there are still cases where we might not
fit into UNIX_PATH_MAX limit (usually 108 characters), because
the path is derived also from other variables, e.g.
XDG_CONFIG_HOME for session domains.
There are two components though, that are needless: "/target/"
and "domain-" prefix. Drop them. This is safe to do, because
running domains have their path saved in status XML and even
though paths are dropped on migration, they are not part of guest
ABI and thus we are free to change them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If a user passes a list of disks to migrate but don't actually use
'VIR_MIGRATE_NON_SHARED_DISK' or 'VIR_MIGRATE_NON_SHARED_INC' flags the
parameter would be simply ignored without informing the user of the
error.
Add a proper error in such case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When VIR_MIGRATE_TUNNELLED is used without
VIR_MIGRATE_NON_SHARED_DISK/VIR_MIGRATE_NON_SHARED_INC
an error was reported without actually returning failure.
This was caused by a refactor which dropped many error paths.
Fixes: 6111b23522
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes
commit 38abf9c34d
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jun 21 13:22:40 2023 +0100
src: set max open file limit to match systemd >= 240 defaults
The bug referenced in that commit had suggested to set
LimitNOFile=512000:1024
on the basis that matches current systemd default behaviour and is
compatible with old systemd. That was good except
* The setting is LimitNOFILE and these are case sensitive
* The hard and soft limits were inverted - soft must come
first and so it would have been ignored even if the
setting name was correct.
* The default hard limit is 524288 not 512000
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If one of previous commits taught us something, it's that:
sizeof(variable) and sizeof(type) are not the same. Especially
because for live enough code the type might change (e.g. as we
use autoptr more). And since we don't get any warnings when an
incorrect length is passed to memset() it is easy to mess up. But
with sizeof(variable) instead, it's not as easy. Therefore,
switch to using memset(variable, 0, sizeof(*variable)), or its
alternatives, depending on level of pointers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
There are some cases left after previous commit which were not
picked up by coccinelle. Mostly, becuase the spatch was not
generic enough. We are left with cases like: two variables
declared on one line, a variable declared in #ifdef-s (there are
notoriously difficult for coccinelle), arrays, macro definitions,
etc.
Finish what coccinelle started, by hand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
This is a more concise approach and guarantees there is
no time window where the struct is uninitialized.
Generated using the following semantic patch:
@@
type T;
identifier X;
@@
- T X;
+ T X = { 0 };
... when exists
(
- memset(&X, 0, sizeof(X));
|
- memset(&X, 0, sizeof(T));
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
When a VSERPORT_CHANGE event is processed, we firstly do a little
detour and try to detect whether the event is coming from guest
agent. If so, we notify threads that are currently talking to the
agent about this fact. Then we proceed with usual event
processing (BeginJob(), update domain def, emit event, and so
on).
In both cases we use the same @dev variable to refer to domain
device. While this works, it will make writing semantic patch
unnecessary harder (see next commit(s)). Therefore, introduce a
separate variable for the detour code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
There are couple of variables that are declared at function
beginning but then used solely within a block (either for() loop
or if() statement). And just before their use they are zeroed
explicitly using memset(). Decrease their scope, use struct zero
initializer and drop explicit memset().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
When I implemented passt support in libvirt, I saw the --mac-addr
option on the passt commandline, immediately assumed that this was
used for setting the guest interface's mac address somewhere within
passt, and read no further. As a result, "--mac-addr" is always added
to the passt commandline, specifying the setting from <mac
addr='blah'/> in the guest's interface config.
But as pointed out in this bugzilla comment:
https://bugzilla.redhat.com/2184967#c8
That is *not at all* what passt's --mac-addr option does. Instead, it
is used to force the *remote* mac address for incoming traffic to a
specific value. So setting --mac-addr results in all traffic on the
interface having the same (the guest's) mac address for both source
and destination in all traffic. Surprisingly, this still works, so
nobody noticed it during testing.
The proper thing is to not specify any mac address to passt - the
remote MAC addresses can and should remain untouched, and the local
MAC address will end up being known to passt just by the guest sending
out packets with that MAC address.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
This reverts commit 8511b96a31.
Turns out, we need to do a bit more than just plain
qemuSecurityDomainSetPathLabel() which sets svirt_image_t. Passt
has its own SELinux policy and as a part of that they invent
passt_log_t for log files. Right now, I don't know how libvirt
could query that and even if I did, passt SELinux policy would
need to permit relabelling from svirt_t to passt_log_t, which it
doesn't [1].
Until these problems are addressed we shouldn't be pre-creating
the file as it puts users into way worse position - even
scenarios that used to work don't work. But then again - using
log file for passt is usually valuable for developers only and
not regular users.
1: https://bugzilla.redhat.com/show_bug.cgi?id=2209191#c10
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This reverts commit 83686f1eea.
This is needed only so that the next revert is clean.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When automatically adding a NUMA node (qemuDomainDefNumaAutoAdd()) the
memory size of the node is computed as:
total_memory - sum(memory devices)
And we have a nice helper for that: virDomainDefGetMemoryInitial() so
it looks logical to just call it. Except, this code runs in post parse
callback, i.e. memory sizes were not validated and it may happen that
the sum is greater than the total memory. This would be caught by
virDomainDefPostParseMemory() but that runs only after driver specific
callbacks (i.e. after qemuDomainDefNumaAutoAdd()) and because the
domain config was changed and memory was increased to this huge
number no error is caught.
So let's do what virDomainDefGetMemoryInitial() would do, but
with error checking.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2216236
Fixes: f5d4f5c8ee
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
If a per-domain SWTPM state directory exists but is empty our
code still considers it a valid state and skips running
'swtpm_setup' (handled in qemuTPMEmulatorRunSetup()).
While we should not try to inspect individual files created by
swtpm, we can still consider empty folder as non-existent state.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/320
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we don't use it for probing at all we can remove all the
corresponding monitor code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability code now probes the presence of commands from the QMP
schema instead of using 'query-commands'. Don't call the command and
adjust the '.replies' files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the probing code to extract the data from the QMP schema rather
than invoking 'query-commands'. This patch doesn't yet remove the actual
invocation of 'query-commands', just moves the actual probing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for configuring the 'wwn' of a IDE disk was added in qemu
commit 95ebda85e09 (v1.0-1869-g95ebda85e0) and can't be compiled
out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for configuring the 'wwn' of a SCSI disk was added in qemu
commit 27395add759ff4caeb0 (v1.0-3326-g27395add75) and can't be compiled
out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All backing chain members which were auto-added by image detection,
including the terminating element, should have the 'detected' property
set to true. This is needed to properly strip the detected elements in
some cases, e.g. for the status XML where we could treat some images as
manually terminated even when it was auto-detected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrap argument definition of qemuDomainSaveInternal and align argument
in the invocation of the aforementioned function in
qemuDomainManagedSaveHelper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the previous commit we no longer require that logind is actually
running, it merely has to be activatable.
https://gitlab.com/libvirt/libvirt/-/issues/489
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since systemd 240, all services get an open file hard limit of
500k, and a soft limit of 1024. This limit means apps are safe
to use select() by default which is limited to 1024 FDs. Apps
which don't use select() are expected to simply set their soft
limit to match the hard limit during startup.
With our current unit file settings we've been effectively
reducing the max open files we have on most modern systems.
https://gitlab.com/libvirt/libvirt/-/issues/489
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All services are ordered after local-fs.target unless they have set
DefaultDependencies=no, which we do not do.
https://gitlab.com/libvirt/libvirt/-/issues/489
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtio-gpu 'blob' support was insufficiently validated. Qemu
requires a memfd memory backing in order to use udmabuf and enable blob
support. Example error:
$ virsh start rhel9
error: Failed to start domain 'rhel9'
error: internal error: qemu unexpectedly closed the monitor: 2023-07-18T02:33:57.083178Z qemu-kvm: -device {"driver":"virtio-vga","id":"video0","max_outputs":1,"blob":true,"bus":"pcie.0","addr":"0x1"}: cannot enable blob resources without udmabuf
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, the way to set PC speaker for a guest was to pass:
-soundhw pcspk
but as of QEMU commit v5.1.0-rc0~28^2~3 this is deprecated and we
should use:
-machine pcspk-audiodev=$id
instead. The old way was then removed in commit v7.1.0-rc0~99^2~3.
Now, ideally we would have a capability selecting whether we talk
to a QEMU that understands the new way or not. But it's not that
simple - the machine attribute is just an alias to the .audiodev=
attribute of 'isa-pcspk' object and both are created in
pc_machine_initfn() function, i.e. not then the PC_MACHINE() class
is initialized, but when it's instantiated. IOW, it's not possible
for us to query whether we're dealing with older or newer QEMU.
But given that the newer version is supported since v5.1.0 and the
minimal version we require is v4.2.0 (i.e. there are two releases
which don't understand the newer cmd line) and how frequently this
feature is (un-)used (the issue was reported after ~1 year since it
stopped working), I believe we can live without any capability and
just use the newer cmd line unconditionally.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/490
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Now that the QEMU_CAPS_USB_STORAGE_REMOVABLE capability is no
longer used we can stop querying it and retire it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced in QEMU commit of v0.14.0-rc0~83^2~1 and not being
able to compile the .removable attribute of the "usb-storage"
object out, renders our corresponding capability
QEMU_CAPS_USB_STORAGE_REMOVABLE always set. Stop using it in
command generation / domain validation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit be1b7d5b18 introduced parsing /proc/cpuinfo for "address size"
which is not including on S390 and therefore reports an internal error.
Lets remove the parsing on S390.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add async-teardown to the features list in domain capabilities allowing
high level management to introspect the availability of the asynchronous
teardown feature.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Up until v2.11.0-rc2~19^2~3 QEMU used to require at least one
NUMA node to be configured when memory hotplug was enabled. After
that commit, QEMU automatically adds a NUMA node if none was
specified on the cmd line. Reflect this in domain XML, i.e.
explicitly add a NUMA node into our domain definition if needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2216236
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
If a domain has NUMA configured, then all <memory/> devices
(except for 'virtio-pmem') need to have targetNode set. There are
two checks inside of qemuDomainDefValidateMemoryHotplugDevice()
for this: one inside of big switch() statement, which only checks
'dimm' and 'nvdimm' cases, and the other at the end of the
function that checks all models (except for 'virtio-pmem'). Let's
keep the latter and remove the former as the latter covers the
former too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Asynchronous teardown can be specified if the QEMU binary supports it by
adding in the domain XML
<features>
...
<async-teardown enabled='yes|no'/>
...
</features>
By default this new feature is disabled.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU capability is looking in query-command-line-options response for
...
{
"parameters": [
{
"name": "async-teardown",
"type": "boolean"
}
],
"option": "run-with"
}
...
allow to use the QEMU option -run-with async-teardown=on|off
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow //disk/target@removable for scsi disk devices, since QEMU has support
the removable attribute for scsi-hd device from v0.14.0[1].
[1]: 419e691f8e: scsi-disk: Allow overriding SCSI INQUIRY removable bit
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If VIR_ASYNC_JOB_NONE flag is present, job.current is equal
to NULL, which leads to SIGSEGV. Thus, this check should be
moved up.
Fixes: v8.0.0-427-gf304de0df6
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In one of my previous commits I've introduced @logfd variable
that was supposed to hold FD of passt logfile. But I've forgot to
assign the qemuDomainOpenFile() retval to it.
Fixes: 8511b96a31
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are a few situations where passt itself is unable to create
a file because it runs under QEMU user (e.g. just like our
example from formatdomain.rst suggests: /var/log/passt.log). If
libvirtd runs with sufficient permissions (e.g. as root) it can
create the file and set seclabels on it so that passt can then
open it.
Ideally, we would just pass pre-opened FD, but this wasn't viewed
as secure enough [1]. So lets just create the file and set
seclabels.
For the case when both libvirtd and passt have the same
permissions, well then we fail before even needing to fork() and
exec().
1: https://archives.passt.top/passt-dev/20230606225836.63aecebe@elisabeth/
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2209191
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
New storage types are not implemented in generators for -drive and the
xen config. Explicitly reject them in case of a programming error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When detaching a device, the following race condition may happen:
Once qemuDomainSignalDeviceRemoval() marks the device for
removal, it returns true, which means it is the caller
that marked the device for removal is going to remove the
device from domain definition.
But qemuDomainWaitForDeviceRemoval() may still receive
timeout from virDomainObjWaitUntil() which is implemented
by pthread_cond_timedwait() due to an unavoidable race
between the expiration of the timeout and the predicate
state(priv->unplug.alias) change.
And then qemuDomainWaitForDeviceRemoval() will return 0,
thus the caller will not remove the device from domain
definition.
In this situation, the device is still present in the domain
definition but doesn't exist in qemu anymore. Worse, there is
no way to remove it from the domain definition.
Solution is to recheck the value of priv->unplug.alias to
determine who is going to remove the device from domain
definition.
Signed-off-by: zuo boqun <zuoboqun@baidu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Qemu 8.1.0 will add discard_no_unref option for qcow2 images.
When this option is enabled (default=false), then it will no longer
unreference clusters when guest does a discard, but it will just free
the blocks (useful for incremental backups for example) and pass the
discard to the lower layer.
This was implemented to avoid fragmentation within the qcow2 image.
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qcow2 driver allows passing discards to the storage while keeping
the reference of the block, and just marking it as zeroed. This can
decrease the levels of fragmentation of the qcow2 metadata when
discards are enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Memory slots are required only for DIMM-like devices, while other
devices defined via <memory> such as virtio-mem may use the PCI bus and
thus do not require/consume a memory slot.
Fix the validation code to calculate the required count of memory
devices only for DIMMs and NVDIMMs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specify the memory size by using '-m size=2048k' instead of just '-m 2'.
The new syntax is used when memory hotplug is enabled. To preserve
memory sizing, if memory hotplug is disabled the size is rounded down to
the nearest mebibyte.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current implementation of virConnectBaselineHypervisorCPU in QEMU
driver can provide a CPU definition that will not work on all hosts in
case they have different maximum physical address size. So when we get
the info from domain capabilities, we need to choose the smallest
physical address size for the computed baseline CPU definition.
https://bugzilla.redhat.com/show_bug.cgi?id=2171860
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already report the hosts physical address size in host capabilities,
but computing a baseline CPU definition is done from domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is used to fill an unsigned long long anyway and if it is negative
than there is really an issue somewhere.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The @unionMems argument of qemuProcessSetupPid() function is not
necessary really as all callers pass 'true'. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The unit that cpuset CGroups controller works with is a
thread/process, not individual memory allocations. Therefore,
after we've set cpuset.mems for emulator (after previous commit
it's set to union of all host NUMA nodes allowed for given
domain), and as we try to set up cpuset.mems for vCPUs/IOThreads,
memory is migrated to selected NUMA node(s). We are effectively
saying: "this thread (vCPU thread) can have memory only from
these NUMA node(s)".
That's not really what we want though. The cpuset controller
doesn't differentiate memory "belonging" to the emulator thread
and vCPU thread or IOThread even.
Therefore, set union of all allowed host NUMA nodes, just like
we're doing for the emulator thread.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2138150
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In ideal world, my plan was perfect. We allow union of all host
nodes in cpuset.mems and once QEMU has allocated its memory, we
'fix up' restriction of its emulator thread by writing the
original value we wanted to set all along. But in fact, we can't
do it because that triggers memory movement. For instance,
consider the following <numatune/>:
<numatune>
<memory mode="strict" nodeset="0"/>
<memnode cellid="1" mode="strict" nodeset="1"/>
</numatune>
<numa>
<cell id="0" cpus="0-1" memory="1024000" unit="KiB" />
<cell id="1" cpus="2-3" memory="1048576" unit="KiB"/>
</numa>
This is meant to create 1:1 mapping between guest and host NUMA
nodes. So we start QEMU with cpuset.mems set to "0-1" (so that it
can allocate memory even for guest node #1 and have the memory
come fro host node #1) and then, set cpuset.mems to "0" (because
that's where we wanted emulator thread to live).
But this in turn triggers movement of all memory (even the
allocated one) to host NUMA node #0. Therefore, we have to just
keep cpuset.mems untouched and rely on .host-nodes passed on the
QEMU cmd line.
The placement still suffers because of cpuset.mems set for vcpus
or iothreads, but that's fixed in next commit.
Fixes: 3ec6d586bc
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Every caller will pass 'qdevid' as it's populated in the data
mandatorily with qemu-4.2 and onwards due to mandatory -blockdev use.
Thus we can drop compatibility with the old way of matching the disk via
alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every caller will pass 'qdevid' as it's populated in the data
mandatorily with qemu-4.2 and onwards due to mandatory -blockdev use.
Thus we can drop compatibility with the old way of matching the disk via
alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically this didn't work with any supported qemu version as we
don't set the alias of the device, and thus qemu uses a different alias
resulting in a failure to startup the VM:
internal error: unable to execute QEMU command 'block_set_io_throttle': Device 'drive-sd-disk0' not found
Refuse setting throttling as this is unlikely to be needed and proper
fix requires using -device instead of -drive if=sd.
Note that this was broken when I moved the setup of throttling as a
command at startup for blockdev integration quite a while ago. Until
then throttling was passed as arguments for -drive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function doesn't modify it. Fix the argument declaration so that the
function can be used in a context where we have a 'const' disk
definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>