This commit adds building of `discard_granularity` disk option
for qemu commandline.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1849570
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This introduces the ability to set the discard granularity option
for a disk. It defines the smallest amount of data that can be
discarded in a single operation (useful for managing and
optimizing storage).
However, most hypervisors automatically set the proper discard
granularity and users usually do not need to change the default
setting.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Normally I wouldn't bother with a change like this, but I was touching
the function anyway, and wanted to leave it looking nice and tidy.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the past, the only allowable values for the "driver" field of
virNodeDeviceDetachFlags() were "kvm" or "vfio" for the QEMU driver,
and "xen" for the libxl driver. Then "kvm" was deprecated and removed,
so the driver name became essentially irrelevant (because it is always
called via a particular hypervisor driver, and so the "xen" or "vfio"
can be (and almost always is) implied.
With the advent of VFIO variant drivers, the ability to explicitly
specify a driver name once again becomes useful - it can be used to
name the exact VFIO driver that we want bound to the device in place
of vfio-pci, so this patch allows those other names to be passed down
the call chain, where the code in virpci.c can make use of them.
The names "vfio", "kvm", and "xen" retain their special meaning, though:
1) because there may be some application or configuration that still
calls virNodeDeviceDetachFlags() with driverName="vfio", this
single value is substituted with the synonym of NULL, which means
"bind the default driver for this device and hypervisor". This
will currently result in the vfio-pci driver being bound to the
device.
2) in the case of the libxl driver, "xen" means to use the standard
driver used in the case of Xen ("pciback").
3) "kvm" as a driver name always results in an error, as legacy KVM
device assignment was removed from the kernel around 10 years ago.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since commit baca59a538 the NUMA definition is automatically fixed if
the vCPU count mismatches the NUMA cpu count so that this warning will
never be triggered.
Additionally VIR_WARN of a misconfiguration of a VM would not really
be seen in most cases as it's only simply logged.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As advertised earlier, now that the _virDomainMemoryDef struct is
cleaned up, we can shorten some names as their placement within
unions define their use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The _virDomainMemoryDef struct is getting a bit messy. It has
various members and only some of them are valid for given model.
Worse, some are re-used for different models. We tried to make
this more bearable by putting a comment next to each member
describing what models the member is valid for, but that gets
messy too.
Therefore, do what we do elsewhere: introduce an union of structs
and move individual members into their respective groups.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The _virDomainMemoryDef struct is getting a bit messy. It has
various members and only some of them are valid for given model.
Worse, some are re-used for different models. We tried to make
this more bearable by putting a comment next to each member
describing what models the member is valid for, but that gets
messy too.
Therefore, do what we do elsewhere: introduce an union of structs
and move individual members into their respective groups.
This allows us to shorten some names (e.g. nvdimmPath or
sourceNodes) as their purpose is obvious due to their placement.
But to make this commit as small as possible, that'll be
addressed later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When guest acknowledges change in size of virtio-mem (portion
that's exposed to the guest), QEMU emits
MEMORY_DEVICE_SIZE_CHANGE event. We process it in
processMemoryDeviceSizeChange(). So far, QEMU emits the even only
for virtio-mem (as that's the only memory device model that
allows live changes to its size). Nevertheless, if this ever
changes, validate the memory model upon processing the event as
the rest of the code blindly expects virtio-mem model.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuDomainChangeMemoryLiveValidateChange() function is called
when a live memory device change is requested (via
virDomainUpdateDeviceFlags()). Currently, the only model that is
allowed to change is VIRTIO_MEM (and the only value that's
allowed to change is requestedsize). The aim of the function is
to check whether the change user requested follows this rule. And
in accordance with defensive programming I made the function
check all virDomainMemoryDef struct members. Even those which are
unused for VIRTIO_MEM model.
Drop these checks as the respective members will be inaccessible
soon (as the struct is refined).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of v7.9.0-rc1~296 users have ability to adjust what portion of
virtio-mem is exposed to the guest. Then, as of v9.4.0-rc2~5 they
have ability to set address where the memory is mapped. But due
to a missing check it was possible to feed
virDomainUpdateDeviceFlags() API with memory device XML that
changes the address. This is of course not possible and should be
forbidden. Add the missing check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since its introduction in 4d1b771fbb
it has only been used to differentiate between START and non-START.
Last use of QEMU_DOMAIN_LOG_CONTEXT_MODE_ATTACH was removed by:
commit f709377301
qemu: Fix qemuDomainObjTaint with virtlogd
QEMU_DOMAIN_LOG_CONTEXT_MODE_STOP is unused since:
commit cf3ea0769c
qemu: process: Append the "shutting down" message using the new APIs
Now, the only caller passes QEMU_DOMAIN_LOG_CONTEXT_MODE_START.
Assume that's always the case and remove the 'mode' argument.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the support to revert external snapshots is implemented we can
drop this check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With the introduction of external snapshot revert support we need to
error out in some cases when trying to delete some snapshots.
If users reverts to non-leaf snapshots and would try to delete it after
the revert is done it would not work currently as this operation would
require using block-stream which is not implemented for now as in this
case the snapshot has two children so the disk files have multiple
overlays.
Similarly if user reverts to non-leaf snapshot and would try to delete
snapshot that is non-leaf but not in currently active snapshot chain we
would still need to use block-commit operation. The issue here is that
in order to do that we would have to start new qemu process with
different domain definition than what is currently used by the domain.
If the current domain would be running it would complicate things even
more so this operation is not yet supported.
If user creates new snapshot after reverting to non-leaf snapshot it
creates a new branch. Deleting snapshot with multiple children will
require block-stream which is not implemented for now.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There will be more external snapshot checks introduced by following
patch so group them together.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With introduction of external snapshot revert we will have to update
backing store of qcow images not actively used be QEMU manually.
The need for this patch comes from the fact that we stop and start QEMU
process therefore after revert not all existing snapshots will be known
to that QEMU process due to reverting to non-leaf snapshot or having
multiple branches.
We need to loop over all existing snapshots and check all disks to see
if they happen to have the image we are deleting as backing store and
update them to point to the new image except for images currently used
by the running QEMU process doing the merge operation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We only need the domain definition from domain object. This will allow
us to use it from snapshot code where we need to pass different domain
definition.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When user creates a new snapshot after reverting to non-leaf snapshot we
no longer need to store the temporary overlays as they will be part of
the VM XMLs stored in the newly created snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When deleting external snapshot and parent snapshot is the currently
active snapshot as user reverted to it we need to properly update the
parent snapshot metadata.
After the delete is done the new overlay files will be the currently
used files created when snapshot revert was done, replacing the original
overlay files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When block commit is not needed we can just simply unlink the
disk files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In this case there is no need to run block commit and using qemu process
at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Before external snapshot revert every delete operation did block commit
in order to delete a snapshot. But now when user reverts to non-leaf
snapshot deleting leaf snapshot will not have any overlay files so we
can just simply delete the snapshot images.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This part of code is about to grow to make deletion work when user
reverts to non-leaf snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The new name reflects that we prepare data for external snapshot
deletion and the old name will be used later for different part of code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When reverting to external snapshot we need to create new overlay qcow2
files from the disk files the VM had when the snapshot was taken.
There are some specifics and limitations when reverting to a snapshot:
1) When reverting to last snapshot we need to first create new overlay
files before we can safely delete the old overlay files in case the
creation fails so we have still recovery option when we error out.
These new files will not have the suffix as when the snapshot was
created as renaming the original files in order to use the same file
names as when the snapshot was created would add unnecessary
complexity to the code.
2) When reverting to any snapshot we will always create overlay files
for every disk the VM had when the snapshot was done. Otherwise we
would have to figure out if there is any other qcow2 image already
using any of the VM disks as backing store and that itself might be
extremely complex and in some cases impossible.
3) When reverting from any state the current overlay files will be
always removed as that VM state is not meant to be saved. It's the
same as with internal snapshots. If user want's to keep the current
state before reverting they need to create a new snapshot. For now
this will only work if the current snapshot is the last.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Both creating and deleting snapshot are using VIR_ASYNC_JOB_SNAPSHOT but
reverting is using VIR_ASYNC_JOB_START. Let's unify it to make it
consistent for all snapshot operations.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We will need to reuse the functionality when reverting external
snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To create new overlay files when external snapshot revert support is
introduced we will be using different domain definition than what is
currently used by the domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract creation of qcow2 files for external snapshots to separate
function as we will need it for external snapshot revert code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When creating external snapshot this function is called only when the VM
is not running so there is only one definition to care about. However,
it will be used by external snapshot revert code for active and inactive
definition and they may be different if a disk was (un)plugged only for
the active or inactive definition.
The current code would crash so use virDomainDiskByName() to get the
correct disk from the domain definition based on the disk name and make
sure it exists.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract the code that updates disks in domain definition while creating
external snapshots. We will use it later in the external snapshot revert
code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This new option will be used by external snapshot revert code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemu removed the support for the old 'ivshmem' device in 4.0 release.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The device was removed in qemu-4.0 and is superseded by 'ivshmem-plain'
and 'ivshmem-doorbell'.
Always report error when the old version is used and drop the irrelevant
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we've used QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS as witness
that the topology must cover the maximum number ov vcpus. qemu started
to enforce this in qemu-2.5, thus we can now always do the check.
This change also requires aligning the topology in certain test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Due to the way the information is stored by the XML parser, we've
had this quirk where specifying any information about the loader
or NVRAM would implicitly set its format to raw. That is,
<nvram>/path/to/guest_VARS.fd</nvram>
would effectively be interpreted as
<nvram format='raw'>/path/to/guest_VARS.fd</nvram>
forcing the use of raw format firmware even when qcow2 format
would normally be preferred based on the ordering of firmware
descriptors. This behavior can be worked around in a number of
ways, but it's fairly unintuitive.
In order to remove this quirk, move the selection of the default
firmware format from the parser down to the individual drivers.
Most drivers only support raw firmware images, so they can
unconditionally set the format early and be done with it; the
QEMU driver, however, supports multiple formats and so in that
case we want this default to be applied as late as possible,
when we have already ruled out the possibility of using qcow2
formatted firmware images.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Keep things consistent by using the same file extension for the
generated NVRAM path as the NVRAM template.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the user included loader.readonly=no in the domain XML, we
should not pick a firmware build that expects to work with
loader.readonly=yes.
https://bugzilla.redhat.com/show_bug.cgi?id=2196178
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now, we only generate it after finding a matching entry
either among firmware descriptors or in the legacy firmware
list.
Even if the domain is configured to use a custom firmware build
that we know nothing about, however, we should still automatically
generate the NVRAM path instead of requiring the user to provide
it manually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Just like the more common split builds, these are of type
QEMU_FIRMWARE_DEVICE_FLASH; however, they have no associated
NVRAM template, so we can't access the corresponding structure
member unconditionally or we'll trigger a crash.
https://bugzilla.redhat.com/show_bug.cgi?id=2196178
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The documentation states that, just like the Modern() variant,
this function should return 1 if a match wasn't found. It
currently doesn't do that, and returns 0 instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In mu previous commits I've moved internals of
qemuDomainChrDefDropDefaultPath() into a separate function
(qemuDomainChrMatchDefaultPath()) but forgot to remove @buf and
@regexp variables which are now unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For historical reasons (i.e. unknown reason) we put channel
sockets into a path derived from cfg->libDir which is a path that
survives host reboots (e.g. /var/lib/libvirt/...). This is not
necessary and in fact for session daemon creates a longer prefix:
XDG_CONFIG_HOME -> /home/user/.config
XDG_RUNTIME_DIR -> /run/user/1000
Worse, if host is rebooted suddenly (e.g. due to power loss) then
we leave files behind and nobody will ever remove them.
Therefore, place the channel target dir into state dir.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2173980
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A <channel/> device is basically an UNIX socket into guest.
Whatever is sent from the host, appears in the guest and vice
versa. But because of that, the length of the path to the socket
is important (underscored by fact that we derive the path from
domain short name). But there are still cases where we might not
fit into UNIX_PATH_MAX limit (usually 108 characters), because
the path is derived also from other variables, e.g.
XDG_CONFIG_HOME for session domains.
There are two components though, that are needless: "/target/"
and "domain-" prefix. Drop them. This is safe to do, because
running domains have their path saved in status XML and even
though paths are dropped on migration, they are not part of guest
ABI and thus we are free to change them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If a user passes a list of disks to migrate but don't actually use
'VIR_MIGRATE_NON_SHARED_DISK' or 'VIR_MIGRATE_NON_SHARED_INC' flags the
parameter would be simply ignored without informing the user of the
error.
Add a proper error in such case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When VIR_MIGRATE_TUNNELLED is used without
VIR_MIGRATE_NON_SHARED_DISK/VIR_MIGRATE_NON_SHARED_INC
an error was reported without actually returning failure.
This was caused by a refactor which dropped many error paths.
Fixes: 6111b23522
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes
commit 38abf9c34d
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jun 21 13:22:40 2023 +0100
src: set max open file limit to match systemd >= 240 defaults
The bug referenced in that commit had suggested to set
LimitNOFile=512000:1024
on the basis that matches current systemd default behaviour and is
compatible with old systemd. That was good except
* The setting is LimitNOFILE and these are case sensitive
* The hard and soft limits were inverted - soft must come
first and so it would have been ignored even if the
setting name was correct.
* The default hard limit is 524288 not 512000
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If one of previous commits taught us something, it's that:
sizeof(variable) and sizeof(type) are not the same. Especially
because for live enough code the type might change (e.g. as we
use autoptr more). And since we don't get any warnings when an
incorrect length is passed to memset() it is easy to mess up. But
with sizeof(variable) instead, it's not as easy. Therefore,
switch to using memset(variable, 0, sizeof(*variable)), or its
alternatives, depending on level of pointers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
There are some cases left after previous commit which were not
picked up by coccinelle. Mostly, becuase the spatch was not
generic enough. We are left with cases like: two variables
declared on one line, a variable declared in #ifdef-s (there are
notoriously difficult for coccinelle), arrays, macro definitions,
etc.
Finish what coccinelle started, by hand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
This is a more concise approach and guarantees there is
no time window where the struct is uninitialized.
Generated using the following semantic patch:
@@
type T;
identifier X;
@@
- T X;
+ T X = { 0 };
... when exists
(
- memset(&X, 0, sizeof(X));
|
- memset(&X, 0, sizeof(T));
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
When a VSERPORT_CHANGE event is processed, we firstly do a little
detour and try to detect whether the event is coming from guest
agent. If so, we notify threads that are currently talking to the
agent about this fact. Then we proceed with usual event
processing (BeginJob(), update domain def, emit event, and so
on).
In both cases we use the same @dev variable to refer to domain
device. While this works, it will make writing semantic patch
unnecessary harder (see next commit(s)). Therefore, introduce a
separate variable for the detour code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
There are couple of variables that are declared at function
beginning but then used solely within a block (either for() loop
or if() statement). And just before their use they are zeroed
explicitly using memset(). Decrease their scope, use struct zero
initializer and drop explicit memset().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
When I implemented passt support in libvirt, I saw the --mac-addr
option on the passt commandline, immediately assumed that this was
used for setting the guest interface's mac address somewhere within
passt, and read no further. As a result, "--mac-addr" is always added
to the passt commandline, specifying the setting from <mac
addr='blah'/> in the guest's interface config.
But as pointed out in this bugzilla comment:
https://bugzilla.redhat.com/2184967#c8
That is *not at all* what passt's --mac-addr option does. Instead, it
is used to force the *remote* mac address for incoming traffic to a
specific value. So setting --mac-addr results in all traffic on the
interface having the same (the guest's) mac address for both source
and destination in all traffic. Surprisingly, this still works, so
nobody noticed it during testing.
The proper thing is to not specify any mac address to passt - the
remote MAC addresses can and should remain untouched, and the local
MAC address will end up being known to passt just by the guest sending
out packets with that MAC address.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
This reverts commit 8511b96a31.
Turns out, we need to do a bit more than just plain
qemuSecurityDomainSetPathLabel() which sets svirt_image_t. Passt
has its own SELinux policy and as a part of that they invent
passt_log_t for log files. Right now, I don't know how libvirt
could query that and even if I did, passt SELinux policy would
need to permit relabelling from svirt_t to passt_log_t, which it
doesn't [1].
Until these problems are addressed we shouldn't be pre-creating
the file as it puts users into way worse position - even
scenarios that used to work don't work. But then again - using
log file for passt is usually valuable for developers only and
not regular users.
1: https://bugzilla.redhat.com/show_bug.cgi?id=2209191#c10
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This reverts commit 83686f1eea.
This is needed only so that the next revert is clean.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When automatically adding a NUMA node (qemuDomainDefNumaAutoAdd()) the
memory size of the node is computed as:
total_memory - sum(memory devices)
And we have a nice helper for that: virDomainDefGetMemoryInitial() so
it looks logical to just call it. Except, this code runs in post parse
callback, i.e. memory sizes were not validated and it may happen that
the sum is greater than the total memory. This would be caught by
virDomainDefPostParseMemory() but that runs only after driver specific
callbacks (i.e. after qemuDomainDefNumaAutoAdd()) and because the
domain config was changed and memory was increased to this huge
number no error is caught.
So let's do what virDomainDefGetMemoryInitial() would do, but
with error checking.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2216236
Fixes: f5d4f5c8ee
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
If a per-domain SWTPM state directory exists but is empty our
code still considers it a valid state and skips running
'swtpm_setup' (handled in qemuTPMEmulatorRunSetup()).
While we should not try to inspect individual files created by
swtpm, we can still consider empty folder as non-existent state.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/320
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we don't use it for probing at all we can remove all the
corresponding monitor code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability code now probes the presence of commands from the QMP
schema instead of using 'query-commands'. Don't call the command and
adjust the '.replies' files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the probing code to extract the data from the QMP schema rather
than invoking 'query-commands'. This patch doesn't yet remove the actual
invocation of 'query-commands', just moves the actual probing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for configuring the 'wwn' of a IDE disk was added in qemu
commit 95ebda85e09 (v1.0-1869-g95ebda85e0) and can't be compiled
out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The support for configuring the 'wwn' of a SCSI disk was added in qemu
commit 27395add759ff4caeb0 (v1.0-3326-g27395add75) and can't be compiled
out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All backing chain members which were auto-added by image detection,
including the terminating element, should have the 'detected' property
set to true. This is needed to properly strip the detected elements in
some cases, e.g. for the status XML where we could treat some images as
manually terminated even when it was auto-detected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrap argument definition of qemuDomainSaveInternal and align argument
in the invocation of the aforementioned function in
qemuDomainManagedSaveHelper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the previous commit we no longer require that logind is actually
running, it merely has to be activatable.
https://gitlab.com/libvirt/libvirt/-/issues/489
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since systemd 240, all services get an open file hard limit of
500k, and a soft limit of 1024. This limit means apps are safe
to use select() by default which is limited to 1024 FDs. Apps
which don't use select() are expected to simply set their soft
limit to match the hard limit during startup.
With our current unit file settings we've been effectively
reducing the max open files we have on most modern systems.
https://gitlab.com/libvirt/libvirt/-/issues/489
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All services are ordered after local-fs.target unless they have set
DefaultDependencies=no, which we do not do.
https://gitlab.com/libvirt/libvirt/-/issues/489
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtio-gpu 'blob' support was insufficiently validated. Qemu
requires a memfd memory backing in order to use udmabuf and enable blob
support. Example error:
$ virsh start rhel9
error: Failed to start domain 'rhel9'
error: internal error: qemu unexpectedly closed the monitor: 2023-07-18T02:33:57.083178Z qemu-kvm: -device {"driver":"virtio-vga","id":"video0","max_outputs":1,"blob":true,"bus":"pcie.0","addr":"0x1"}: cannot enable blob resources without udmabuf
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, the way to set PC speaker for a guest was to pass:
-soundhw pcspk
but as of QEMU commit v5.1.0-rc0~28^2~3 this is deprecated and we
should use:
-machine pcspk-audiodev=$id
instead. The old way was then removed in commit v7.1.0-rc0~99^2~3.
Now, ideally we would have a capability selecting whether we talk
to a QEMU that understands the new way or not. But it's not that
simple - the machine attribute is just an alias to the .audiodev=
attribute of 'isa-pcspk' object and both are created in
pc_machine_initfn() function, i.e. not then the PC_MACHINE() class
is initialized, but when it's instantiated. IOW, it's not possible
for us to query whether we're dealing with older or newer QEMU.
But given that the newer version is supported since v5.1.0 and the
minimal version we require is v4.2.0 (i.e. there are two releases
which don't understand the newer cmd line) and how frequently this
feature is (un-)used (the issue was reported after ~1 year since it
stopped working), I believe we can live without any capability and
just use the newer cmd line unconditionally.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/490
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Now that the QEMU_CAPS_USB_STORAGE_REMOVABLE capability is no
longer used we can stop querying it and retire it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced in QEMU commit of v0.14.0-rc0~83^2~1 and not being
able to compile the .removable attribute of the "usb-storage"
object out, renders our corresponding capability
QEMU_CAPS_USB_STORAGE_REMOVABLE always set. Stop using it in
command generation / domain validation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit be1b7d5b18 introduced parsing /proc/cpuinfo for "address size"
which is not including on S390 and therefore reports an internal error.
Lets remove the parsing on S390.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add async-teardown to the features list in domain capabilities allowing
high level management to introspect the availability of the asynchronous
teardown feature.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Up until v2.11.0-rc2~19^2~3 QEMU used to require at least one
NUMA node to be configured when memory hotplug was enabled. After
that commit, QEMU automatically adds a NUMA node if none was
specified on the cmd line. Reflect this in domain XML, i.e.
explicitly add a NUMA node into our domain definition if needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2216236
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
If a domain has NUMA configured, then all <memory/> devices
(except for 'virtio-pmem') need to have targetNode set. There are
two checks inside of qemuDomainDefValidateMemoryHotplugDevice()
for this: one inside of big switch() statement, which only checks
'dimm' and 'nvdimm' cases, and the other at the end of the
function that checks all models (except for 'virtio-pmem'). Let's
keep the latter and remove the former as the latter covers the
former too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Asynchronous teardown can be specified if the QEMU binary supports it by
adding in the domain XML
<features>
...
<async-teardown enabled='yes|no'/>
...
</features>
By default this new feature is disabled.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU capability is looking in query-command-line-options response for
...
{
"parameters": [
{
"name": "async-teardown",
"type": "boolean"
}
],
"option": "run-with"
}
...
allow to use the QEMU option -run-with async-teardown=on|off
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow //disk/target@removable for scsi disk devices, since QEMU has support
the removable attribute for scsi-hd device from v0.14.0[1].
[1]: 419e691f8e: scsi-disk: Allow overriding SCSI INQUIRY removable bit
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If VIR_ASYNC_JOB_NONE flag is present, job.current is equal
to NULL, which leads to SIGSEGV. Thus, this check should be
moved up.
Fixes: v8.0.0-427-gf304de0df6
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In one of my previous commits I've introduced @logfd variable
that was supposed to hold FD of passt logfile. But I've forgot to
assign the qemuDomainOpenFile() retval to it.
Fixes: 8511b96a31
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are a few situations where passt itself is unable to create
a file because it runs under QEMU user (e.g. just like our
example from formatdomain.rst suggests: /var/log/passt.log). If
libvirtd runs with sufficient permissions (e.g. as root) it can
create the file and set seclabels on it so that passt can then
open it.
Ideally, we would just pass pre-opened FD, but this wasn't viewed
as secure enough [1]. So lets just create the file and set
seclabels.
For the case when both libvirtd and passt have the same
permissions, well then we fail before even needing to fork() and
exec().
1: https://archives.passt.top/passt-dev/20230606225836.63aecebe@elisabeth/
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2209191
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
New storage types are not implemented in generators for -drive and the
xen config. Explicitly reject them in case of a programming error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When detaching a device, the following race condition may happen:
Once qemuDomainSignalDeviceRemoval() marks the device for
removal, it returns true, which means it is the caller
that marked the device for removal is going to remove the
device from domain definition.
But qemuDomainWaitForDeviceRemoval() may still receive
timeout from virDomainObjWaitUntil() which is implemented
by pthread_cond_timedwait() due to an unavoidable race
between the expiration of the timeout and the predicate
state(priv->unplug.alias) change.
And then qemuDomainWaitForDeviceRemoval() will return 0,
thus the caller will not remove the device from domain
definition.
In this situation, the device is still present in the domain
definition but doesn't exist in qemu anymore. Worse, there is
no way to remove it from the domain definition.
Solution is to recheck the value of priv->unplug.alias to
determine who is going to remove the device from domain
definition.
Signed-off-by: zuo boqun <zuoboqun@baidu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Qemu 8.1.0 will add discard_no_unref option for qcow2 images.
When this option is enabled (default=false), then it will no longer
unreference clusters when guest does a discard, but it will just free
the blocks (useful for incremental backups for example) and pass the
discard to the lower layer.
This was implemented to avoid fragmentation within the qcow2 image.
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qcow2 driver allows passing discards to the storage while keeping
the reference of the block, and just marking it as zeroed. This can
decrease the levels of fragmentation of the qcow2 metadata when
discards are enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Memory slots are required only for DIMM-like devices, while other
devices defined via <memory> such as virtio-mem may use the PCI bus and
thus do not require/consume a memory slot.
Fix the validation code to calculate the required count of memory
devices only for DIMMs and NVDIMMs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specify the memory size by using '-m size=2048k' instead of just '-m 2'.
The new syntax is used when memory hotplug is enabled. To preserve
memory sizing, if memory hotplug is disabled the size is rounded down to
the nearest mebibyte.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current implementation of virConnectBaselineHypervisorCPU in QEMU
driver can provide a CPU definition that will not work on all hosts in
case they have different maximum physical address size. So when we get
the info from domain capabilities, we need to choose the smallest
physical address size for the computed baseline CPU definition.
https://bugzilla.redhat.com/show_bug.cgi?id=2171860
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already report the hosts physical address size in host capabilities,
but computing a baseline CPU definition is done from domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is used to fill an unsigned long long anyway and if it is negative
than there is really an issue somewhere.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The @unionMems argument of qemuProcessSetupPid() function is not
necessary really as all callers pass 'true'. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The unit that cpuset CGroups controller works with is a
thread/process, not individual memory allocations. Therefore,
after we've set cpuset.mems for emulator (after previous commit
it's set to union of all host NUMA nodes allowed for given
domain), and as we try to set up cpuset.mems for vCPUs/IOThreads,
memory is migrated to selected NUMA node(s). We are effectively
saying: "this thread (vCPU thread) can have memory only from
these NUMA node(s)".
That's not really what we want though. The cpuset controller
doesn't differentiate memory "belonging" to the emulator thread
and vCPU thread or IOThread even.
Therefore, set union of all allowed host NUMA nodes, just like
we're doing for the emulator thread.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2138150
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In ideal world, my plan was perfect. We allow union of all host
nodes in cpuset.mems and once QEMU has allocated its memory, we
'fix up' restriction of its emulator thread by writing the
original value we wanted to set all along. But in fact, we can't
do it because that triggers memory movement. For instance,
consider the following <numatune/>:
<numatune>
<memory mode="strict" nodeset="0"/>
<memnode cellid="1" mode="strict" nodeset="1"/>
</numatune>
<numa>
<cell id="0" cpus="0-1" memory="1024000" unit="KiB" />
<cell id="1" cpus="2-3" memory="1048576" unit="KiB"/>
</numa>
This is meant to create 1:1 mapping between guest and host NUMA
nodes. So we start QEMU with cpuset.mems set to "0-1" (so that it
can allocate memory even for guest node #1 and have the memory
come fro host node #1) and then, set cpuset.mems to "0" (because
that's where we wanted emulator thread to live).
But this in turn triggers movement of all memory (even the
allocated one) to host NUMA node #0. Therefore, we have to just
keep cpuset.mems untouched and rely on .host-nodes passed on the
QEMU cmd line.
The placement still suffers because of cpuset.mems set for vcpus
or iothreads, but that's fixed in next commit.
Fixes: 3ec6d586bc
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Every caller will pass 'qdevid' as it's populated in the data
mandatorily with qemu-4.2 and onwards due to mandatory -blockdev use.
Thus we can drop compatibility with the old way of matching the disk via
alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every caller will pass 'qdevid' as it's populated in the data
mandatorily with qemu-4.2 and onwards due to mandatory -blockdev use.
Thus we can drop compatibility with the old way of matching the disk via
alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically this didn't work with any supported qemu version as we
don't set the alias of the device, and thus qemu uses a different alias
resulting in a failure to startup the VM:
internal error: unable to execute QEMU command 'block_set_io_throttle': Device 'drive-sd-disk0' not found
Refuse setting throttling as this is unlikely to be needed and proper
fix requires using -device instead of -drive if=sd.
Note that this was broken when I moved the setup of throttling as a
command at startup for blockdev integration quite a while ago. Until
then throttling was passed as arguments for -drive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function doesn't modify it. Fix the argument declaration so that the
function can be used in a context where we have a 'const' disk
definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a domain, it's done so in two steps (actually more,
but lets focus on just the following two):
1) qemuProcessPrepareDomain(), followed by
2) qemuProcessPrepareHost().
Now, in the first step (PrepareDomain()), PCI backends for all
hostdevs is set (qemuProcessPrepareDomain() ->
qemuProcessPrepareDomainHostdevs() -> qemuDomainPrepareHostdev()
-> qemuDomainPrepareHostdevPCI()). Perfect.
But then, additional hostdevs may appear, because in the host
prepare phase we may insert some hostdevs into domain definition
(qemuProcessPrepareHost() -> qemuProcessNetworkPrepareDevices()).
Now, these additional hostdevs don't undergo the same prepare as
hostdevs that were already present in the domain definition (i.e.
in qemuProcessPrepareDomain() phase). Therefore, we have to call
corresponding prepare function explicitly.
NB, the interface hotplug code (qemuDomainAttachNetDevice()) does
not suffer from this problem, because it calls top level
qemuDomainAttachHostDevice() which is used to hotplug regular
hostdevs too and as such calls qemuDomainPrepareHostdev().
Fixes: 3b87709c76
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2209853
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's almost like we've anticipated this. Our XML parser and
formatter handles @address and @dev attributes of <portForward/>
element completely independent of each other. And as of commit
2023_03_29.b10b983~3 passt allows handling these two separately
too. All that's left is generate the cmd line according to this
new fact.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2210287
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is fairly trivial. Just set .memaddr attribute if a value
was set in the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2180679
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After a QEMU domain is started, among other thing we query memory
device information. And while memory address is returned by QEMU
for all models, we store it only for DIMMs and NVDIMMs. Do store
it for VIRTIO_MEM and VIRTIO_PMEM too.
This effectively reports the address the virtio-mem/virtio-pmem
is mapped to in live XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Again, this fixes the same problem as one of previous commits,
but this time for memory hotplug. Long story short, if there's a
domain running and the emulator thread is restricted to a subset
of host NUMA nodes, but the memory that's about to be hotplugged
requires memory from a host NUMA node that's not in the set we
need to allow emulator thread to access the node, temporarily.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Consider a domain with two guest NUMA nodes and the following
<numatune/> setting :
<numatune>
<memory mode="strict" nodeset="0"/>
<memnode cellid="0" mode="strict" nodeset="1"/>
</numatune>
What this means is the emulator thread is pinned onto host NUMA
node #0 (by setting corresponding cpuset.mems to "0"), and two
memory-backend-* objects are created:
-object '{"qom-type":"memory-backend-ram","id":"ram-node0", .., "host-nodes":[1],"policy":"bind"}' \
-numa node,nodeid=0,cpus=0-1,memdev=ram-node0 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node1", .., "host-nodes":[0],"policy":"bind"}' \
-numa node,nodeid=1,cpus=2-3,memdev=ram-node1 \
Note, the emulator thread is pinned well before QEMU is even
exec()-ed.
Now, the way memory allocation works in QEMU is: the emulator
thread calls mmap() followed by mbind() (which is sane, that's
how everybody should do it). BUT, because the thread is already
restricted by CGroups to just NUMA node #0, calling:
mbind(host-nodes:[1]); /* made up syntax (TM) */
fails. This is expected though. Kernel was instructed to place
the memory at NUMA node "0" and yet, process is trying to place
it elsewhere.
We used to solve this by not restricting emulator thread at all
initially, and only after it's done initializing (i.e. we got the
QMP greeting) we placed it onto desired nodes. But this had its
own problems (e.g. QEMU might have locked pieces of its memory
which were then unable to migrate onto different NUMA nodes).
Therefore, in v5.1.0-rc1~282 we've changed this and set cgroups
upfront (even before exec()-ing QEMU). And this used to work, but
something has changed (I can't really put my finger on it).
Therefore, for the initialization start the thread with union of
all configured host NUMA nodes ("0-1" in our example) and fix the
placement only after QEMU is started.
NB, the memory hotplug suffers the same problem, but that will
be fixed in the next commit.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2138150
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Inside of qemuProcessSetupPid() there's @numatune variable which
is set to vm->def->numa, but it lives only in one block. In the
rest of places the expanded form (vm->def->numa) is used instead.
Move the variable declaration at the beginning of the function
and use it instead of the expanded form.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We cannot use host-nodes attribute for it, but there is no reason for us
to skip the preallocation optimisation using thread-context in such
case. Thankfully returning the proper nodemask from
qemuBuildMemoryBackendProps is enough to trigger this.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 720e8f13ff
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 1347a19f75
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: c6c9b5d251
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: b10bc8f7ab
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Add new compress methods zlib and zstd for parallel migration,
these method should be used with migration option --comp-methods
and will be processed in 'qemuMigrationParamsSetCompression'.
Note that only one compress method could be chosen for parallel
migration and they cann't be used in compress migration.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This is pretty trivial, just append "mte=on/off" to -machine
arguments.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The MTE feature is not supported by all QEMUs, only those with
QEMU_CAPS_MACHINE_VIRT_MTE capability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The MTE feature (introduced in QEMU commit of v5.1.0-rc1~8^2~11)
is detectable via 'qom-list-properties' for 'virt' machine type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there's not a single caller that would
call qemuDomainGetMemLockLimitBytes() with @forceVFIO set. All
callers pass false.
Drop the unneeded argument from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there's not a single caller that would
call qemuDomainAdjustMaxMemLock() with @forceVFIO set. All callers
pass false.
Drop the unneeded argument from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
During hotplug of a NVMe disk we need to adjust the memlock
limit. The computation of the limit is handled by
qemuDomainGetMemLockLimitBytes() which looks at given domain
definition and accounts for various device types (as different
types require different amounts). But during disk hotplug the
disk is not added to domain definition until the very last
moment. Therefore, qemuDomainGetMemLockLimitBytes() has this
@forceVFIO argument which tells it to assume VFIO even if there
are no signs of VFIO in domain definition. And this kind of
works, until the amount needed for NVMe disks changed (in
v9.3.0-rc1~52). What's missing in the commit is making @forceVFIO
behave the same as if there was an NVMe disk present in the
domain definition.
But, we can do even better - just mimic whatever we're doing for
hostdevs. IOW - introduce qemuDomainAdjustMaxMemLockNVMe() that
behaves the same as qemuDomainAdjustMaxMemLockHostdev().
There are subtle differences though:
1) qemuDomainAdjustMaxMemLockHostdev() can afford placing hostdev
right at the end of vm->def->hostdevs, because the array was
already reallocated (at the beginning of
qemuDomainAttachHostPCIDevice()). But
qemuDomainAdjustMaxMemLockNVMe() doesn't have that luxury.
2) qemuDomainAdjustMaxMemLockHostdev() places a
virDomainHostdevDef pointer into domain definition, while
qemuDomainStorageSourceAccessModifyNVMe() (which calls
qemuDomainAdjustMaxMemLock()) sees a virStorageSource pointer
but domain definition contains virDomainDiskDef. But that's
okay, we can create a dummy disk definition and append it into
the domain definition.
After this, qemuDomainAdjustMaxMemLock() can be called with
@forceVFIO = false, as the disk is now part of domain definition
(when computing the new limit).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2014030#c28
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reflect the new default value, and explain that a runtime
lookup will be performed if the value is not an absolute path.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we're performing the lookup at runtime, doing it at
build time is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't bother looking at /usr/libexec, since every distro
ships dbus-daemon in $PATH.
Note that it's still possible for the administrator to prevent
this lookup and use an arbitrary binary by setting the
appropriate key in qemu.conf.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reflect the new default value, and explain that a runtime
lookup will be performed if the value is not an absolute path.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that we're performing the lookup at runtime, doing it at
build time is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use the recently introduced virFindFileInPathFull() function to
discover the path for qemu-bridge-helper and qemu-pr-helper at
runtime.
Note that it's still possible for the administrator to prevent
this lookup and use arbitrary binaries by setting the
appropriate keys in qemu.conf: this simply removes the need to
perform the lookup at build time, and thus to have the helpers
installed in the build environment.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Allow users controlling the multi-channel mode by adding a
'multichannel' property parsed for USB audio devices and wire up the
support in the qemu driver.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When QEMU closes the monitor suddenly, the following error
message is reported:
internal error: qemu unexpectedly closed the monitor: ...
And this works. But other error messages produced in the same
function include domain name too. Do that for the unexpectedly
closed monitor message too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The regular VM startup code first calls the setup of the disk backing
chain as defined in the XML and then calls the function to load the
rest of the backing chain from the image metadata. The hotplug code
did it the other way around, thus causing a failure when attempting
to attach a QCOW2 image via FD passing.
Reorder the hotplug code to have the same order.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2193315
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The spelling is slightly different from another otherwise
identical error message in the same file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Implement the support for the persisted poll parameters and remove
restrictions on saving config when modifying them during runtime.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the internal types to unsigned long long. Luckily we can also
covert the external types too:
- 'qemuDomainSetIOThreadParams' can accept both _UINT and _ULLONG by
converting to 'virTypedParamsGetUnsigned'
- querying is handled via the bulk stats API which is flexible:
- we use virTypedParamListAddUnsigned to use the bigger type only if
necessary
- most users don't even notice because the bindings abstract the
data types
Apart from the code modifications we also improve the documentation
which was missing for the setters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU accepts even values bigger than INT_MAX. The reasoning for these
checks was that the QAPI definition declares them as 'int', but in QAPI
terms that's any number as it's JSON.
Remove the validation as well as the comment misinterpreting the QAPI
definiton.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now return always 0. Refactor the code and remove return
values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return the number of parameters via pointer passed as argument to free
up possibility to report errors. Strangely all callers actually use
'int' as type for storing the count of elements, thus this function will
use the same.
The function is also renamed to virTypedParamListSteal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The struct will be made private in upcoming patches. Construct the list
of block entries into a separate list and append them rather than
remember the index of the count element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add an allocator function and refactor all allocations to use it. In
upcoming patches 'struct _virTypedParamList' will be made private.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanups, qemuHostdevPreparePCIDevices() no longer
needs virQEMUCaps. Drop its passing from callers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there are some functions that do nothing:
qemuConnectDomainXMLToNativePrepareHostHostdev()
qemuConnectDomainXMLToNativePrepareHost()
qemuProcessPrepareHostHostdev()
qemuProcessPrepareHostHostdevs()
Remove them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When preparing a SCSI <hostdev/> with passthrough of a host SCSI
adapter (i.e. no protocol), a virStorageSource structure is
initialized and stored inside virDomainHostdevDef. But the source
structure is filled in many places, with almost the same code.
Firstly, qemuProcessPrepareHostHostdev() and
qemuConnectDomainXMLToNativePrepareHostHostdev() are the same.
Secondly, qemuDomainPrepareHostdev() allocates the src structure,
only to let qemuProcessPrepareHostHostdev() fill src->path later.
Well, src->path can be filled at the same place where the src
structure is allocated (qemuDomainPrepareHostdev()) which renders
the other two functions needless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There is no way the qemuDomainAttachHostPCIDevice() function can
be called over a hostdev with PCI backend other than VFIO. And
even if it were, then the check is written so poorly that it lets
some types through (e.g. KVM) only to let
qemuBuildPCIHostdevDevProps() called afterwards fail properly.
Drop this check and rely on qemuDomainPrepareHostdevPCI() (and
worst case scenario even qemuBuildPCIHostdevDevProps()) to report
the proper error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We used to support KVM and VFIO style of PCI assignment. The
former was dropped in v5.7.0-rc1~103 and thus we only support
VFIO. All other backends lead to an error (see
qemuBuildPCIHostdevDevProps(), or qemuBuildPCIHostdevDevStr() as
it used to be called in the era of aforementioned commit).
Might as well report the error in prepare phase and save hassle
of proceeding with device preparation (e.g. in case of hotplug
overriding the device's driver, setting seclabels, etc.).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
virsh command domxml-to-native failed with below error but start
command succeed for same domain xml.
"internal error: invalid PCI passthrough type 'default'"
If a <hostdev> PCI backend is not set in the XML, the supported
one is then chosen in qemuHostdevPreparePCIDevicesCheckSupport().
But this function is not called anywhere from
qemuConnectDomainXMLToNative(). But qemuDomainPrepareHostdev()
is. And it is also called from domain startup/hotplug code.
Therefore, move the backend setting to the common path and drop
qemuHostdevPreparePCIDevicesCheckSupport().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So far, qemuDomainPrepareHostdev() is a NOP for anything but a
SCSI hostdev. This will change soon. Therefore, move the SCSI
hostdev preparation into a separate function
(qemuDomainPrepareHostdevSCSI()) and make
qemuDomainPrepareHostdev() call function corresponding to the
hostdev type (or nothing if the type doesn't need any
preparation).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When attaching a hostdev of a SCSI subsys,
qemuDomainPrepareHostdev() is called. This makes sense because
the function prepares just SCSI hostdevs ignoring others. But
this will soon change. Thefore, move the function call out of
qemuDomainAttachHostSCSIDevice() and into
qemuDomainAttachHostDevice().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanups a lot of functions from qemu_hotplug.c
are called only within the file. Make them static and drop their
declarations from the header file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is no good reason for qemuDomainUpdateDeviceLive() to live
in (ever growing) qemu_driver.c while we have qemu_hotplug.c
which already contains the rest of hotplug code. Move the
function to its new home.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There is no good reason for qemuDomainAttachDeviceLive() to live
in (ever growing) qemu_driver.c while we have qemu_hotplug.c
which already contains the rest of hotplug code. Move the
function to its new home.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The qemuDomainUpdateDeviceLive() accepts virDomainPtr as one of
its arguments, but use it only to get QEMU driver out of it.
Well, the only caller already does that and thus can pass it
instead of virDomainPtr.
This also makes it look like the rest of device hot(un-)plug
functions: qemuDomainAttachDeviceLive() and
qemuDomainUpdateDeviceLive().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
A new enum type "Default" has been added for Input bus.
The logic that handled default input bus types in
virDomainInputParseXML() has been moved to a new function
virDomainInputDefPostParse() in domain_postparse.c
Link to Issue: https://gitlab.com/libvirt/libvirt/-/issues/8
Signed-off-by: K Shiva <shiva_kr@riseup.net>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The disk private data contain information about the tray and
removability of the disk. Until recently we didn't support hotplug of
removable disks thus it wasn't a problem but now when you can hotplug a
CDROM you would not be able to open its tray.
Fix it by updating the hotplugged disk the same way we do at startup.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160435
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the logic to update one single disk (without emitting any
events) so that it can be reused when updating the state after a disk
hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code compares the 'tray_open' boolean from 'struct
qemuDomainDiskInfo' directly against 'disk->tray_status' which is
declared as virDomainDiskTray (enum). Now the logic works correctly
because the _OPEN enum has value '1'.
Separate the event emission code from the update code and remember the
old tray state in a separate variable rather than having the sneaky
logic we have today.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With cgroupv2 this has better effect on the resource allocation. An
excerpt from Documentation/admin-guide/cgroup-v2.rst explains is this
way:
Migrating a process across cgroups is a relatively expensive operation
and stateful resources such as memory are not moved together with the
process. This is an explicit design decision as there often exist
inherent trade-offs between migration and various hot paths in terms
of synchronization cost.
[...]
Setting a non-empty value to "cpuset.mems" causes memory of
tasks within the cgroup to be migrated to the designated nodes if
they are currently using memory outside of the designated nodes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of them are platform devices and only i6300esb can be plugged
multiple times into different PCI slots.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes it also work during attach. Also add a test for attaching a
watchdog with incompatible action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2187278
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The loop initially skipped the first one because it was mainly checking
the incompatible actions, but was then modified to also check the
duplicity of iTCO watchdogs.
While at it change the type of the iteration variable to the usual size_t.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2187133
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can launch qemu with it, but it will not work since it's not even
probed by the kernel at the mapped address with different machine types
since they are expected to be connected to ISA and not even its newer
LPC counterpart found on q35. And it does not exist on non-x86
architectures.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting QEMU, or when hotplugging a PCI device QEMU might
lock some memory. How much? Well, that's an undecidable problem.
But despite that, we try to guess. And it more or less works,
until there's a counter example. This time, it's a guest with
both <hostdev/> and an NVMe <disk/>. I've started a simple guest
with 4GiB of memory:
# virsh dominfo fedora
Max memory: 4194304 KiB
Used memory: 4194304 KiB
And here are the amounts of memory that QEMU tried to lock,
obtained via:
grep VmLck /proc/$(pgrep qemu-kvm)/status
1) with just one <hostdev/>
VmLck: 4194308 kB
2) with just one NVMe <disk/>
VmLck: 4328544 kB
3) with one <hostdev/> and one NVMe <disk/>
VmLck: 8522852 kB
Now, what's surprising is case 2) where the locked memory exceeds
the VM memory. It almost resembles VDPA. Therefore, treat is as
such.
Unfortunately, I don't have a box with two or more spare NVMe-s
so I can't tell for sure. But setting limit too tight means QEMU
refuses to start.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2014030
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's quite difficult, if not impossible, to create a working RISC-V VMs
using the current default machine type of 'spike_v1.10'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's quite difficult, if not impossible, to create a usable ARM VMs
using the current default machine type of 'integratorcp'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
I've tried, then I've tried even harder, but still wasn't able to
make sense of our console backcompat code in all its fine
details. Since I value my sanity, let's just forbid hotunplug of
<console/>, especially since detaching of corresponding <serial/>
works.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When cleaning up after removed device, qemuDomainChrRemove() is
called. But this may fail, in which case we successfully ignore
the failure and virDomainChrDefFree() the device anyway. While it
decreases our memory consumption, it's a bit too far, especially
if the next step is 'virsh dumpxml'. Then our memory consumption
decreases all the way down to zero as we crash.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For a running guest, a <serial/> device can be hotunplugged. This
will then remove also aliased <console/>. Trying to hotplug a
<console/> device then, libvirtd crashed because it dereferences
def->consoles while there's none.
Fixes: 42d53ac799
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When removing the compat console from domain defintion, removing
it from the vmdef->consoles array is good, but not sufficient.
The console definition might have been fully allocated (after
daemon restarted and reloaded the status XML). Use
virDomainChrDefFree() to free also the definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When hotpluging a <serial/> device, we might need to add a
<console/> device with it (because of some crazy backcompat).
Now, hotplugging is done in several phases. In one of them,
qemuDomainChrPreInsert() allocates space for both devices, and
then qemuDomainChrInsertPreAlloced() actually inserts the device
into domain definition and sets up the <console/> device with it.
Except, the condition that checks whether to create the aliased
<console/> is wrong as it compares nconsoles against 0.
Surprisingly, qemuDomainChrInsertPreAllocCleanup() doesn't suffer
from the same error.
Fixes: daf51be5f1
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
igb is a new network device which will be introduced with QEMU 8.0.0.
It is a successor of e1000e so it has PCIe interface and is understands
virtio-net headers as e1000e does.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During qemu driver shutdown, objects are freed in qemuStateCleanup that
could still be used by active worker threads, resulting in crashes. E.g.
a worker thread could be processing a monitor EOF event after the
security manager is already disposed
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00007fd9a9a1e1fe in virSecurityManagerMoveImageMetadata (mgr=0x7fd948012160, pid=-1, src=src@entry=0x7fd98c072c90, dst=dst@entry=0x0)
at ../../src/security/security_manager.c:468
#1 0x00007fd9646ff0f0 in qemuSecurityMoveImageMetadata (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, src=src@entry=0x7fd98c072c90,
dst=dst@entry=0x0) at ../../src/qemu/qemu_security.c:182
#2 0x00007fd96462c7b0 in qemuBlockRemoveImageMetadata (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, diskTarget=0x7fd98c072530 "vda",
src=<optimized out>) at ../../src/qemu/qemu_block.c:2628
#3 0x00007fd9646929d6 in qemuProcessStop (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, reason=reason@entry=VIR_DOMAIN_SHUTOFF_SHUTDOWN,
asyncJob=asyncJob@entry=QEMU_ASYNC_JOB_NONE, flags=<optimized out>) at ../../src/qemu/qemu_process.c:7585
#4 0x00007fd9646fc842 in processMonitorEOFEvent (vm=0x7fd98c066db0, driver=0x7fd948043830) at ../../src/qemu/qemu_driver.c:4794
#5 qemuProcessEventHandler (data=0x561a93febb60, opaque=0x7fd948043830) at ../../src/qemu/qemu_driver.c:4900
#6 0x00007fd9a9971a31 in virThreadPoolWorker (opaque=opaque@entry=0x561a93fb58e0) at ../../src/util/virthreadpool.c:163
(gdb) p mgr->drv
$2 = (virSecurityDriverPtr) 0x0
Prior to commit 7cf76d4e3a, the worker thread pool was freed before
disposing any driver objects. Let's return to that pattern, but leave
the other changes made by 7cf76d4e3a.
Signed-off-by: Tamara Schmitz <tamara.schmitz@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Historically the snapshot code attempted to forbid internal snapshots
with UEFI both in active and inactive case. Unfortunately due to the
intricacies of UEFI probing this didn't really work for inactive VMs
which made users rely on the feature.
Now with the changes to store detected UEFI environment also in the
inactive definition this broke the feature for those users.
Since the varstore doesn't really change that much in the lifecycle of a
VM it usually is okay to simply leave it as is.
Restore the functionality for inactive snapshots by disabling the check.
In the future when uefi snapshotting will be added the rest of the
condition will also be removed.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/460
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Attaching disk into running VM the offline definition may not be
updated and we will end up with that disk existing only in live
definition. Creating snapshot with this state saves both live and
offline definition into snapshot metadata.
When we are deleting an external snapshot we are updating these
definitions in the snapshot metadata so we should just skip over
non-existing disks instead of reporting error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2174700
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify validation of VIR_DOMAIN_FEATURE_HTM, VIR_DOMAIN_FEATURE_NESTED_HV,
VIR_DOMAIN_FEATURE_CCF_ASSIST and remove temporary string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The features:
QEMU_CAPS_MACHINE_PSERIES_CAP_HPT_MAX_PAGE_SIZE
QEMU_CAPS_MACHINE_PSERIES_CAP_HTM
QEMU_CAPS_MACHINE_PSERIES_CAP_NESTED_HV
QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC
QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC
QEMU_CAPS_MACHINE_PSERIES_CAP_IBS
are supported by all qemu versions that libvirt supports. Drop the
obsolete checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic pointer freeing, remove 'ret' variable and also remove
return value completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove useless call to virCapabilitiesFreeMachines as the pointers were
cleared and the unneeded 'ret' variable. Since we don't need to clear
the 'machines' pointer now, remove that as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's never set to any real value. Remove it along with the caching code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the architecture specific code to probe the support for HVF
from the actual setting of the capability.
In upcoming patches 'virQEMUCapsProbeHVF' will be mocked in the
testsuite to provide testing for the HVF hypervisor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The logic in 'virQEMUCapsInitQMP' invokes a second probe of qemu in case
when acceleration is used and TCG is supported to specifically probe the
CPU and features of non-accelerated guests.
The same logic must then be used in 'qemucapabilitiestest' when
replaying the data for testing otherwise the test would fail.
Export 'virQEMUCapsHaveAccel' for test usage and use the same logic
in 'testQemuCaps'.
Fix the comment in 'virQEMUCapsInitQMP' to outline what's happening.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The changes to the output files are the exact opposite of
those from commit 22207713cf: this is proof that the fix is
working as intended, and that existing domains will keep using
raw firmware images regardless of whether or not qcow2 images
are available on the system and have higher priority.
New domains will keep picking whatever firmware is considered
the preferred one according to the order of descriptors, as
evidenced by the fact that the recently introduced
firmware-auto-efi-abi-update-aarch64 test case is unaffected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The virConnectOpen(), well virConnectOpenInternal() reports an
error if embed root is not an absolute path. This is a fair
requirement, but our qemu_shim doesn't check this requirement and
passes the path to mkdir(), only to fail later on, leaving the
empty directory behind:
$ ls -d asd
ls: cannot access 'asd': No such file or directory
$ virt-qemu-run -r asd whatever.xml
virt-qemu-run: cannot open qemu:///embed?root=asd: unsupported configuration: root path must be absolute
$ ls -d asd
asd
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
