Commit a3ab6d42 changed the libvirtd profile to a named profile
but neglected to accommodate the change in the qemu profile
ptrace and signal rules.
Later on 4ec3cf9a fixed that for ptrace and signal but openGraphicsFD
is still missing.
As a result, libvirtd is unable to open UI on libvirt >=5.1 e.g. with
virt-manager.
Add openGraphicsFD rule that references the libvirtd profile
by name in addition to full binary path.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1833040
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Normal practice is to provide a Ref API for all objects, but this was
forgotten for the virNetworkPortPtr object.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use auto free to avoid leaking the "trustGuestRxFilters" strings
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to librados.
Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Change the domain conf so invoke the new network port public APIs instead
of the network callbacks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The portid will be the UUID of the virNetworkPort object associated
with the network interface when a guest is running.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The various steps involved in reconnecting to a domain may cause updates
to the virDomainObj struct that need to be reflected in the saved status
file.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When starting up it is important to notify the network driver of any
NICs which are used by running guests so that it can account for any
resources they are using.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This initial implementation just wires up the APIs and does tracking of
the port XML definitions. It is not yet integrated into the resource
allocation logic.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetworkObjPtr state will need to maintain a record of all
virNetworkPortDefPtr objects associated with the network. Record these
in a hash and add APIs for manipulating them.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Define the wire protocol for the virNetworkPort APIs and enable the
client/server RPC dispatch.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a new virNetworPort object that will present an attachment to
a virtual network from a VM.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port bandwidth update code from the domain driver
network callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port deletion code from the domain driver network
callback implementation.
Reivewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port notification code from the domain driver network
callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port allocation code from the domain driver network
callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current qemu driver code for changing bandwidth on a NIC first asks
the network driver if the change is supported, then changes the
bandwidth on the VIF, and then tells the network driver to update the
bandwidth on the bridge.
This is potentially racing if a parallel API call causes the network
driver to allocate bandwidth on the bridge between the check and the
update phases.
Change the code to just try to apply the network bridge update
immediately and rollback at the end if something failed.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When (un)plugging an interface into a network, the 'plugged'
and 'unplugged' operations are invoked in the hook script.
The data provided to the script contains the network XML, the
domain XML and the domain interface XML. When we strictly split the
drivers up this will no longer be possible and thus breakage is
unavoidable. The hook scripts are not considered to be covered by the
API guarantee so this is OK.
To avoid existing scripts taking the wrong action, the existing
operations are changed to 'port-created' and 'port-deleted'
instead. These will receive the network XML and the network port
XML.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkReleaseActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkNotifyActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkAllocateActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Helper APIs are needed to
- Populate basic virNetworkPortDef from virDomainNetDef
- Set a virDomainActualNetDef from virNetworkPortDef
- Populate a full virNetworkPortDef from virDomainActualNetDef
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Stop passing a virDomainNetDefPtr parameter to networkLogAllocation,
instead just pass in the MAC address. The actual device type is also not
required, since virNetworkForwardIfDefPtr has a type field that can be
used instead.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a virNetworkPortDefPtr struct to represent the data associated
with a virtual network port. Add APIs for parsing/formatting XML docs
with the data.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The domain conf actual network def stores a <class id='3'/> element
separately from the <bandwidth>. The class ID should really just be
an attribute on the <bandwidth> element. We can't change existing
XML, and this isn't visible to users since it is internal XML only.
When we expose the new network port XML to users though, we should
get the design right.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When libvirtd is run inside a container it is normal that neither
systemd nor pm-utils will be available. In this case there is no way to
suspend the host, so libvirt should just report the feature unsupported
instead of raising an error.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If libvirt receives DISCONNECTED event and prDaemonRunning is set
to false, and qemuDomainRemoveDiskDevice() is performing in the
meantime, then qemuDomainRemoveDiskDevice() will fail to remove
pr-helper object because prDaemonRunning is false. But removing
that check from qemuHotplugRemoveManagedPR() is not enough,
because after removing the object through monitor the
qemuProcessKillManagedPRDaemon() is called which contains the
same check. Thus the pr-helper process might be left behind.
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Log the flags passed to the function in a exploded state so that it's
easily visible what's happening to the image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the behaviour of launch security is heavily dependent on 3rd party
vendors (e.g. AMD SEV) where the data returned can be essentially
anything, the most reasonable approach here in the test driver is not to
try return any data.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The hash table returned by qemuMonitorGetAllBlockJobInfo is organized by
the frontend name (which skipps the 'drive-' prefix). While our code
properly matches the jobs to the disk, qemu needs the full job name
including the 'drive-' prefix to be able to identify jobs.
Fix this by adding an argument to qemuMonitorGetAllBlockJobInfo which
does not modify the job name before filling the hash.
This fixes a regression where users would not be able to cancel/pivot
block jobs after restarting libvirtd while a blockjob is running.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 76b9aba2ba I refactored how the function treats the readonly
flag which introduced a bug when we'd not allow to force read-write
state for an image.
This created problems with blockjobs where we need to temporarily
force images to have read-write permissions.
Rename QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_READ_ONLY to
QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_FORCE_READ_ONLY and also introduce
a complement QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_FORCE_READ_WRITE which
will allow to force write access.
https://bugzilla.redhat.com/show_bug.cgi?id=1717768
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 76b9aba2ba I tried to refactor qemuDomainStorageSourceAccessAllow
but used wrong operators for adding bitwise flags.
This way the flags would result in 0 if any of them would be applied.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Updates the existing image stored in @path, in case @dxml contains valid
XML supported by the fake host.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extracting the code logic for opening and parsing a test image from
testDomainRestoreFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageGetXMLDesc.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extracting the code logic for writing a test image to disk from
testDomainSaveFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageDefineXML.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The upcoming virDomainBackup() API needs to take advantage of the
ability to expose a bitmap as part of nbd-server-add for a pull-mode
backup (this is the recently-added QEMU_CAPS_NBD_BITMAP capability).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The upcoming virDomainBackup() API needs to take advantage of various
qcow2 bitmap manipulations as the basis to virDomainCheckpoints and
incremental backups. Add four functions to expose
block-dirty-bitmap-{add,enable,disable,merge} (this is the
recently-added QEMU_CAPS_BITMAP_MERGE capability).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Add two capabilities for testing features required for the upcoming
virDomainBackupBegin: use block-dirty-bitmap-merge as the generic
witness of bitmap support needed for checkpoints (since all of the
bitmap management functionalities were finalized in the same qemu 4.0
release), and the bitmap parameter to nbd-server-add for pull-mode
backup support. Even though both capabilities are likely to be
present or absent together (that is, it is unlikely to encounter a
qemu that backports only one of the two), it still makes sense to keep
two capabilities as the two uses are orthogonal (full backups don't
require checkpoints, push mode backups don't require NBD bitmap
support, and checkpoints can be used for more than just incremental
backups).
Existing code is not affected by the new capabilities.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Migration always uses a TCP socket for NBD servers, because we don't
support same-host migration. But upcoming pull-mode incremental backup
needs to also support a Unix socket, for retrieving the backup from
the same host. Support this by plumbing virStorageNetHostDef through
the monitor calls, since that is a nice reusable struct that can track
both TCP and Unix sockets.
Update qemumonitorjsontest to verify both forms of the QMP command.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Now that we never get to the actual snapshot code if there's nothing to
do we can remove the variable and surrounding logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Skip actual snapshot creation code if we have 0 disks to snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All cases taking the 'cleanup' path can take the original 'error' path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce 'rc' for collecting state from monitor commands so that we can
initialize 'ret' to -1. This also fixes few cases which could return 0
from the function despite an error condition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainSnapshotDiskDataFree also removes the resources associated
with the disk data. Move the unlinking of the just-created file so that
we can unify the cleanup paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit cbb4d229de I named the function with 'free' suffix, but at
that time it already did some non-freeing tasks. Rename it to make it
obvious that it's not just memory managemet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function skips disks which are not selected for snapshot. Rather
than creating a sparse array and check whether the given field is filled
compress the entries.
Note that this does not allocate a smaller array, but the memory
allocation is short-lived.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If there's an offline config definition save it unconditionally even if
it was not modified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The error path is unlikely thus saving the status XML even if we didn't
modify it does not add much burden.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After getting rid of pre-transaction qemu support the cleanup section is
unused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Validate @keycodes before successfully returning. Since this is test
driver, @holdtime is being unused here.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 2f2254c7f4 attempted to fix a memory leak by ensuring
cpumapToSet is always a freshly allocated bitmap, but regrettably
introduced a NULL pointer access while doing so, because it called
virBitmapCopy() without allocating the destination bitmap first.
Solve the issue by using virBitmapNewCopy() instead.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Due to this bug the following command would fail on any host where TSC
frequency can be probed:
$ virsh capabilities | virsh cpu-baseline /dev/stdin
error: unsupported configuration: Invalid TSC frequency
https://bugzilla.redhat.com/show_bug.cgi?id=1641702
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a premature optimization. It's perfectly acceptable for
'error' label to deal with @vm == NULL case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We're using VIR_AUTOPTR() for everything now, plus the
cleanup section was not doing anything useful anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In two out of three scenarios we are cleaning up properly after
ourselves, but commit 5f2212c062 has changed the remaining one
in a way that caused it to start leaking cpumapToSet.
Refactor the logic so that cpumapToSet is always a freshly
allocated bitmap that gets cleaned up automatically thanks to
VIR_AUTOPTR(); this also allows us to remove the hostcpumap
variable.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now, if numad fails, we raise an error but return an
empty string to the caller instead of a NULL pointer, which
means processing will continue and the user will see
# virsh start guest
error: Failed to start domain guest
error: invalid argument: Failed to parse bitmap ''
instead of a more reasonable
# virsh start guest
error: Failed to start domain guest
error: operation failed: Failed to query numad for the advisory nodeset
Make sure the user gets a better error message.
https://bugzilla.redhat.com/show_bug.cgi?id=1716387
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ever since the feature was introduced with commit 0f8e7ae33a,
it has contained a logic error in that it attempted to use a NUMA
node map where a CPU map was expected.
Because of that, guests using <numatune> might fail to start:
# virsh start guest
error: Failed to start domain guest
error: cannot set CPU affinity on process 40055: Invalid argument
This was particularly easy to trigger on POWER 8 machines, where
secondary threads always show up as offline in the host: having
<numatune>
<memory mode='strict' placement='static' nodeset='1'/>
</numatune>
in the guest configuration, for example, would result in libvirt
trying to set the process affinity so that it would prefer
running on CPU 1, but since that's a secondary thread and thus
shows up as offline, the operation would fail, and so would
starting the guest.
Use the newly introduced virNumaNodesetToCPUset() to convert the
NUMA node map to a CPU map, which in the example above would be
48,56,64,72,80,88 - a valid input for virProcessSetAffinity().
https://bugzilla.redhat.com/show_bug.cgi?id=1703661
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper converts a set of NUMA node to the set of CPUs
they contain.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This argument wasn't validated anywhere, neither in the generic
implementation nor in the individual drivers. As a result a call to this
function with a large enough codeset value prior to this change causes
libvirtd to crash.
This happens because all drivers call virKeycodeValueTranslate which
uses codeset as an index to the virKeymapValues array, causing an
out-of-bounds error.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When migrating a domain with invtsc CPU feature enabled, the TSC
frequency of the destination host must match the frequency used when the
domain was started on the source host or the destination host has to
support TSC scaling.
If the frequencies do not match and the destination host does not
support TSC scaling, QEMU will fail to set the right TSC frequency when
starting vCPUs on the destination and thus migration will fail. However,
this is quite late since both host might have spent significant time
transferring memory and perhaps even storage data.
By adding the check to libvirt we can let migration fail before any data
starts to be sent over. If for some reason libvirt is unable to detect
the host's TSC frequency or scaling support, we'll just let QEMU try and
the migration will either succeed or fail later.
Luckily, we mandate TSC frequency to be explicitly set in the domain XML
to even allow migration of domains with invtsc. We can just check
whether the requested frequency is compatible with the current host
before starting QEMU.
https://bugzilla.redhat.com/show_bug.cgi?id=1641702
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When the host CPU supports invariant TSC the host CPU definition created
by virCPUx86GetHost will contain (unless probing fails for some reason)
addition TSC related data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 0a97486e09 moved them outside #ifdef, but after virCPUx86GetHost,
which will start calling them in the following patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch adds a new
<counter name='tsc' frequency='N' scaling='on|off'/>
element into the host CPU capabilities XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
On a KVM x86_64 host which supports invariant TSC this function can be
used to detect the TSC frequency and the availability of TSC scaling.
The magic MSR numbers required to check if VMX scaling is supported on
the host are documented in Volume 3 of the Intel® 64 and IA-32
Architectures Software Developer’s Manual.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function is renamed as virQEMUCapsProbeHostCPU and it does not get
the list of allowed CPU models from qemuCaps anymore. This is
responsibility is moved to the caller. The result is just a very thin
wrapper around virCPUGetHost mostly required mocking in tests.
The generic function is used in place of a direct call to virCPUGetHost
in virQEMUCapsInitHostCPUModel to make sure tests don't accidentally
probe host CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1426162
Turns out, some aarch64 systems have SMBIOS info. That means we
can use dmidecode to fetch some information. If that fails, fall
back to the old behaviour.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There's nothing x86 specific about this function. Rename the
function so that it has DMI suffix which enables it to be reused
on different arches (as using X86 from say ARM would look
suspicious).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All current IOMMU features are specific to Intel IOMMU, so
understandably we check for the corresponding capabilities
inside the Intel-specific switch() branch; however, we want
to make sure SMMUv3 IOMMU users get an error if they try to
enable any of those features in their guest, and performing
the capability checks unconditionally is both the easiest
way to achieve that, as well as the one least likely to
result in us inadvertently letting users enable some new
Intel-specific IOMMU feature for ARM guests later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SMMUv3 is an IOMMU implementation for ARM virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability can be used to figure out whether the
QEMU binary at hand supports the machine type property
we need in order to enable SMMUv3 IOMMU support.
Unfortunately we can't avoid probing the RISC-V binaries
along with the ARM ones, since both architectures have
their own 'virt' machine type.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Current capability checks are specific to Intel IOMMU, so
we need to move them inside the switch() statement before
we can introduce more virDomainIOMMUModel values.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This doesn't make a whole lot of difference now, but once
we introduce more virDomainIOMMUModel values the current
structure will no longer work.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ensure unexpected values are dealt with correctly, that
is by invoking virReportEnumRangeError() and immediately
returning a negative value to the caller.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They were introduced by commit 0a97486e09 when moving functions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the scheduler is set before vCPU0 cannot be moved into its cpu,cpuacct
cgroup. While it is not yet known whether this is a bug or not, it makes sense
for us to do that later as otherwise the scheduler would be inherited by vCPU
and I/O Threads even when they do not have any such setting specified.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Begins by writing a @start byte in the first position of @buffer and
then for every next byte it stores the value of its previous one
incremented by one.
Behaves the same for both supported flags.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 6864d8f740
Hugepages don't work in session mode but when building memory
part of command line we query for the default size anyway. This
breaks creating domains under session daemon. Query the page size
only if it's clear we need hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Apart from virDomainDefValidate, virDomainDefPostParse is another
place where operating on info-less devices makes sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Ignore @source in the case of the test driver and return fixed private
IPv4 addresses for all the interfaces defined in the domain.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Creating firewall rules for the virtual networks causes the kernel to
load the conntrack module. This imposes a significant performance
penalty on Linux network traffic. Thus we want to only take that hit if
we actually have virtual networks running.
We need to create global firewall rules during startup in order to
"upgrade" rules for any running networks created by older libvirt.
If no running networks are present though, we can safely delay setup
until the time we actually start a network.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pull the logic for creating global iptables chains into a separate
method and protect its invocation with virOnce, to make it possible
to reuse it in non-startup paths.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Mostly add comments explaining why there are two capabilites
for the same feature and how they interact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Device validation should not have to wait until command line
generation time. Moving the code to a separate function also
allows us to avoid some unnecessary repetition.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename the DOMAIN_DEVICE_ITERATE_GRAPHICS flag.
It was introduced by commit dd45c2710f
with the intention to run the Validate callback even on the graphics
device.
However, enumerating every single device in virDomainDeviceIterateFlags
is unsustainable and what really was special about the graphics device
was the lack of DeviceInfo.
Rename the flag and iterate over more info-less devices. (and leases)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Due to the way that our virObjectUnref() is written it's not
possible that a NULL is passed into *Dispose() function. However,
some functions check for that regardless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Split out the 'shallow' and 'reuse' flags as booleans rather than passing
in flags and constructing them in irrelevant APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the 'shallow' flag as a boolean argument rather than passing
in flags and constructing them in irrelevant APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The NBD migration code uses drive/blockdev-mirror internally. In those
APIs we pass around flags for the monitor commands which are based on
the flags for the virDomainBlockRebase API. Since there's only one flag
which changes, pass it around explicitly rather than obscuring it in a
bitfield.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At the point when we want to modify the permissions for the 'mirror' we
know whether it is supposed to have a backing chain or no. Given that
mirror->backingStore is populated only when we'd need to touch it ayways
we can use qemuDomainStorageSourceChainAccessAllow even in place of
qemuDomainStorageSourceAccessAllow used for other cases to simplify the
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
One code path open-coded qemuDomainStorageSourceChainAccessAllow badly
and also did not integrate with the locking code.
Replace the separate calls with qemuDomainStorageSourceChainAccessAllow
which does everything internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 4e797f1a we parse backingStore of mirror which will later be used
with blockdev. Add some validation for the user passed mirror at the
current point to make sure it's not used improperly.
Validate that it's not used without blockdev and also that it's not
passed when not requesting a shallow copy. Also add a chain terminator
for a deep copy since we know the resulting mirror will not have chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 3decae00e9 qemuDomainStorageSourceAccessAllow revokes the
permissions it granted if it fails halfway, thus we can remove some
calls to qemuDomainStorageSourceAccessRevoke which tried to undo this
situation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 3decae00e9 qemuDomainStorageSourceAccessRevoke keeps the libvirt
error which was set prior to the call around even after the call, thus
we don't need to do the same when reverting access in the block copy
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When aborting or pivoting a block job we record which operation we do
for the mirror in the virDomainDiskDef structure. As everything is
synchronized by a job it's not necessary to modify the state prior to
calling the monitor and resetting the state on failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All blockjobs get their status updated by events from qemu, so this code
no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When used with the new job handler the values will also include some of
the non-public values from qemuBlockjobState. Modify the comment to
clarify this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtlogd daemon's only intended client is the libvirtd daemon. As
such it should never allow clients from other user accounts to connect.
The code already enforces this and drops clients from other UIDs, but
we can get earlier (and thus stronger) protection against DoS by setting
the socket permissions to 0600
Fixes CVE-2019-10132
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virtlockd daemon's only intended client is the libvirtd daemon. As
such it should never allow clients from other user accounts to connect.
The code already enforces this and drops clients from other UIDs, but
we can get earlier (and thus stronger) protection against DoS by setting
the socket permissions to 0600
Fixes CVE-2019-10132
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The admin protocol RPC messages are only intended for use by the user
running the daemon. As such they should not be allowed for any client
UID that does not match the server UID.
Fixes CVE-2019-10132
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In attempt to getting rid of errN labels let's start with the
most upper one and rename it to 'error'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This reverts commit dfd70ca1eb.
Pushed by a mistake, sorry. There's still some discussion going
on upstream.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Qemu added reporting of virtio balloon new statistics stat-htlb-pgalloc and
stat-htlb-pgfail since qemu-3.0 commit b7b12644297. The value of
stat-htlb-pgalloc represents the number of successful hugetlb page allocations
while stat-htlb-pgfail represents the number of failed ones. Add this
statistics reporting to libvirt.
To enable this feature for vm, guest kenel >= 4.17 is required because
the exporting hugetlb page allocation for virtio balloon is introduced
since 6c64fe7f.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Snapshot create operation saves the live XML and uses it to replace the
domain definition in case of revert. But the VM config XML is not saved
and the revert operation does not address this issue. This commit
prevents the config XML from being overridden by snapshot definition.
An active domain stores both current and new definitions. The current
definition (vm->def) stores the live XML and the new definition
(vm->newDef) stores the config XML. In an inactive domain, only the
config XML is persistent, and it's saved in vm->def.
The revert operation uses the virDomainObjAssignDef() to set the
snapshot definition in vm->newDef, if domain is active, or in vm->def
otherwise. But before that, it saves the old value to return to
caller. This return is used here to restore the config XML after
all snapshot startup process finish.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
If an FD is passed into a child using:
virCommandPassFD(cmd, fd, VIR_COMMAND_PASS_FD_CLOSE_PARENT);
then the parent should refrain from touching @fd thereafter. This
is even documented in virCommandPassFD() comment. The reason is
that either at virCommandRun()/virCommandRunAsync() or
virCommandFree() time the @fd will be closed. Closing it earlier,
e.g. right after virCommandPassFD() call might result in
undesired results. Another thread might open a file and receive
the same FD which is then unexpectedly closed by virCommandFree()
or virCommandRun().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Various binaries are statically linking to libvirt_util.la and
other intermediate libraries we build. These intermediate libs
all get built into the main libvirt.so shared library eventually,
so we can dynamically link to that instead and reduce the on disk
footprint.
In libvirt-daemon RPM:
virtlockd: 1.6 MB -> 153 KB
virtlogd: 1.6 MB -> 157 KB
libvirt_iohelper: 937 KB -> 23 KB
In libvirt-daemon-driver-network RPM:
libvirt_leaseshelper: 940 KB -> 26 KB
In libvirt-daemon-driver-storage-core RPM:
libvirt_parthelper: 926 KB -> 21 KB
IOW, about 5.6 MB total space saving in a build done on Fedora 30
x86_64 architecture.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1710575
It may happen that the system where libvirt is built at doesn't
have udevadm binary but the one where it runs does have it.
If we change how udevadm is run in virWaitForDevices() then we
can safely pass a default value in m4 macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The udevsettle binary is no longer used anywhere as it was
replaced by 'udevadm settle'. There's no reason for us to even
check for it in configure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's not true that there is a backup loop. There isn't. Drop this
part of the comment to not confuse anybody.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we know the full list of machine types supported
by the QEMU binary when probing machine type properties,
we can save some work (and eventually test suite churn,
as more architecture-specific machine types need to be
probed) by only probing machines that we know exist.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we have the list of machine types available when
probing machine type properties, we can list properties for
the canonicalized version of the "pseries" machine type
instead of having to go through "spapr-machine", which we
know to be the parent type for all "pseries-*-machine"
types. By doing this, we'll be able to find even properties
that are only available from a certain versioned machine
type forward, and can't thus be obtained when looking at
the parent type only.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The QOM type for machine types is the machine type name
followed by the -machine suffix. Since this is always the
case, we can make virQEMUCapsMachineProps more readable
and avoid repetition by not including the suffix there and
adding it automatically while processing the data; moreover,
when later on we will start figuring out which specific
versioned machine type to probe at runtime instead of doing
so statically, adding the suffix dynamically will become
necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We're going to need information about available machine types
when probing machine type properties soon, and that means we
have to change the order we call QMP commands.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Up until now we've probed machine type properties, along with
properties for other types, in virQEMUCapsProbeQMPDevices(), but
soon we're going to need some logic that is specific to machine
types and as such wouldn't quite fit into that function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit c257352797 introduced a logic bug where we will never save the
inactive XML after a blockjob as the variable which was determining
whether to do so is cleared right before. Thus even if we correctly
modify the inactive state it will be rolled back when libvirtd is
restarted.
Reported-by: Thomas Stein <hello@himbee.re>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It has been exported by systemd commit
commit a571c23e954cb88cdd5faa28593b19bd7c340130
libudev: export udev_monitor_set_receive_buffer_size()
released in v183.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When a vhost scsi device is hotplugged virt-aa-helper is called to
add the respective path.
For example the config:
<hostdev mode='subsystem' type='scsi_host' managed='no'>
<source protocol='vhost' wwpn='naa.50014059de6fba4f'/>
</hostdev>
Will call it to add:
/sys/kernel/config/target/vhost//naa.50014059de6fba4f
But in general /sys paths are filtered in virt-aa-helper.c:valid_path
To allow the path used for vhost-scsi we need to add it to the list of
known and accepted overrides.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1829223
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function was deprecated in udev 219 and all the supported OSes
don't have older version of udev or systemd.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Qemu dropped cpu features for osxsave and ospke [1][2].
The reason for the instant removal is that those features were never
configurable as discussed in [3].
Fortunately the use cases adding those flags in the past are rare, but
they exist. One that I identified are e.g. older virt-install when used
with --cpu=host-model and there always could be the case of a user
adding it to the guest xml.
This triggers an issue like:
qemu-system-x86_64: can't apply global Broadwell-noTSX-x86_64-
cpu.osxsave=on: Property '.osxsave' not found
Ensure that this does no more break spawning newer qemu versions by
not rendering those features into the qemu command line.
Fixes: https://bugs.launchpad.net/fedora/+source/qemu/+bug/1825195
Resolves: https://bugzilla.redhat.com/1644848
[1]: https://git.qemu.org/?p=qemu.git;a=commit;h=f1a2352
[2]: https://git.qemu.org/?p=qemu.git;a=commit;h=9ccb978
[3]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg561877.html
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091
The bit is set when microcode provides the mechanism to invoke a flush
of various exploitable CPU buffers by invoking the VERW instruction.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function gets snapshot XML (provided by used) as an
argument. It parses it into a local variable @def and then sets
some more members (e.g. it creates a copy of live domain XML).
Then it proceeds to checking if snapshot XML is valid (e.g. it
contains as many disks as currently in the domain). If this fails
then the control jumps to endjob label and subsequently return
from the function. This is where AUTOFREE function for @def is
ran. Well, because the code says to run plain VIR_FREE() we leak
some memory because @def is actually an object and therefore
it should have been declared as AUTOUNREF.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The idea of virCommand* APIs is that a possible error that
occurred while constructing cmd line is kept in virCommand
struct. If that's the case all subsequent calls to virCommand*()
are NO-OPs or they return an error. Well,
virCommandPassFDGetFDIndex() is not honoring that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If virStoragePoolObjNew() fails to create new volume object list
then virObjectUnref() is called and since refcounter is 1 then
virStoragePoolObjDispose() is called which in turn calls
virStoragePoolObjClearVols() which in turn dereferences
obj->volumes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qsort element is a pointer of virResctrlMonitorStats, and
the comparing function's arguments have a type of pointer of
virResctrlMonitorStatsPtr.
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Return the number of disks present in the configuration of the test
domain when called with @errors as NULL and @maxerrors as 0.
Otherwise report an error for every second disk, assigning available
error codes in a cyclic order.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In refactoring the snapshot code to prepare for checkpoints, I changed
qemuDomainMomentDiscardAll to take a callback that would handle the
cleanup of either a snapshot or a checkpoint, but failed to set the
callback on one of the two snapshot callers. As a result, 'virsh
undefine $dom --snapshots-metadata' crashed on a NULL function
dereference.
Fixes: a487890d37
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1707708
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
If no board was detected then VIR_REALLOC_N() done at the end of
the function will actually free the memory (because nborads ==
0), but @boards will be set to a non-NULL pointer. This makes it
unnecessary harder for a caller to see if any board was detected.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This brings about a couple of benefits:
- use of VIR_AUTOUNREF() simplifies several callers
- Fixes a todo about virDomainMomentObjList not being polymorphic enough
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
In preparation for making virDomainSnapshotDef a descendant of
virObject, it is time to fix all callers that allocate an object to
use virDomainSnapshotDefNew() instead of VIR_ALLOC(). Fortunately,
there aren't very many :)
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name 'current', and rewrite VIR_CLASS_NEW to call the new
macro with the hard-coded name 'parent', it seems less confusing if
all object code uses similar naming. Thus, this is a mechanical rename
in preparation of making virDomainSnapshotDef a descendent of
virObject.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name, and rewrite VIR_CLASS_NEW to call the new macro
with the hard-coded name 'parent', so that we could make
virDomainMomentDef use a custom name for its base class, it seems less
confusing if all object code uses similar naming. Thus, this is a
mechanical rename in preparation of making virDomainSnapshotDef a
descendent of virObject, when we can no longer use 'parent' for a
different purpose than the base class.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Use qemuDomainStorageSourceAccessModify with correct flags to do the
job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some operations e.g. namespace setup are not necessary when modifying
access to a file which the VM can already access. Add a flag which
allows to skip them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases when we need to modify access permissions for a storage
source which is already used by the VM we should not revoke all
permissions on a failure. Allow this in qemuDomainStorageSourceAccessModify
by adding a new flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than jumping to the correct label use a set of booleans to
determine which operation needs to be rolled back. This will allow more
flexibility when e.g. rollback after a failed operation will not be
necessary/desired.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new flag which will set the image as read-only even if the image
data allows writing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuDomainStorageSourceAccessModify instead of the individual calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new flag QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_CHAIN to select whether
to work on single image or full chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will add a few more flags. Add an enum to collect them
so that we don't end up with multiple bools.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function will be able to deal with non-chains too so drop 'Chain'
and also change the suffix to 'Modify' as it's used both for setup and
teardown.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuDomainStorageSourceChainAccess(Allow|Revoke) as entry
points to qemuDomainStorageSourceChainAccessPrepare for symmetry with
the functions for single backing chain elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it to qemu_domain.c and call it
qemuDomainStorageSourceChainAccessPrepare.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commits 4bc42986 and 218c81ea removed virDomainStorageSourceFormat on
the grounds that there were no external callers; however, the upcoming
backup code wants to output a <target> (push mode) or <scratch> (pull
mode) element that is in all other respects identical to a domain's
<source> element, where the previous virDomainStorageSourceFormat fit
the bill nicely. But rather than reverting the commits, it's easier to
just add an additional parameter for the element name to use, and
update all callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Prepare section for boolean queries and make the typed query section
more clear.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We treated broken schema as failure to look up given query. Treat it as
a separate error instead. It is unlikely to happen though.
Also prepare for possibility of user errors if query components which
can't be queired deeper have following components.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce an array of callbacks for given 'meta-type' of the QAPI schema
structure rather than using code to select it. This will simplify
extension for the other meta-types which are not handled yet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than modifying the context struct add a helpers that does this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Create a context data type for the QAPI path rather than passing an
increasing number of arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUQAPISchemaTypeFromObject and virQEMUQAPISchemaTypeFromObject
can be very easily folded into virQEMUQAPISchemaTraverseObject removing
the need for the helpers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify virQEMUQAPISchemaTraverse by separating out the necessary
operations for given 'meta-type' into separate functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return 1 if the schema entry was found optionally returning it rather
than depending on the returned object.
Some callers don't care which schema object belongs to the query, but
rather only want to know whether it exists. Additionally this will allow
introducing boolean queries for checking if enum values exist.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow for boolean query string, let's return the queried schema entry
via argument rather than a return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The return statement after the infinite loop without a break is there to
appease the compiler. Make it return NULL as it would be a failure if
control flow reaches that point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, the way virBufferFreeAndReset() works is it relies on
virBufferContentAndReset() to fetch the buffer content which is
then freed. This works as long as there is no bug in virBuffer*
implementation (not true apparently). Explicitly call free() over
buffer content.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After 65a372d6e0 the @cfg variable is no longer used. This means
we can drop it and therefore drop 'cleanup' label with it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The @error member can contain a positive value (errno) or a
negative value (-1) to denote a usage error. It doesn't make
much sense to store it as unsigned then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If an error occurs in a virBuffer* API the idea is to free the
content immediately and set @error member used in error reporting
later. Well, this is not what how virBufferAddBuffer works.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Implement testDomainGetTime by returning a fixed timestamp.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that libvirt has firmware auto selection feature the nvram
config knob is more or less obsolete. It still makes sense in
cases where distro users are using does not provide FW descriptor
files, therefore I'm not removing it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Match the XML feature usage of the qemu driver, so the test driver
doesn't reject things like <os firmware='efi'/>.
Particularly VIR_DOMAIN_DEF_FEATURE_NET_MODEL_STRING is needed to
prevent regressions for test suite users with net model strings that
aren't in the virDomainNetModel enum yet
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This function is calling public API virNetworkLookupByName()
which resets the error. Therefore, if
virDomainNetReleaseActualDevice() is used in cleanup path it
actually resets the original error that got us jump into
'cleanup' label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This caused the live XML to report the 'bridge' type instead of the
'network' type, which is a behavioural regression.
It also breaks 'virsh domif-setlink', 'virsh update-device' and
'virsh domiftune'
This reverts commit 518026e159.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
vhostfd passed to cmd->passfd in virCommandPassFD, virCommandFree will
always close cmd->passfd when qemuBuildSCSIVHostHostdevDevStr failed.
Signed-off-by: Jie Wang <wangjie88@huawei.com>
This commit is similar with 692400f4. It fixes an uninitialized
variable to avoid garbage value. This case, returns 0 jiffies if an
error occurs with virNetDevBridgeGet.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1697676
If an user tries to attach a device with colliding user alias
then we attach it happily and thus leave domain unable to start.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When attaching a device to live XML we don't care (well,
shouldn't care) that there's already a device in inactive XML
that has the same user alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If we're attaching a device to both inactive and live XML then
@ret is overwritten which may result in incorrect return value.
For instance, if attaching to inactive XML succeeds, @ret is
assigned value of zero and control proceeds to attaching the
device to live XML. Here, if say
virDomainDeviceValidateAliasForHotplug() fails the control jumps
over to 'cleanup' label and zero is returned indicating success.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our coding style specifies that only negative values are considered as
error. Check for return value of virDomainDiskInsert() properly,
following the style. Not that the function can now return anything other
than 0 or -1, but it just triggers my OCD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Added in QEMU by v2.12.0-481-g0da0fb0628 (released in 3.0).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the hash function for a name collides with other entry
already in the hash we prepend to the bucket. This creates a 'stack
effect' on the buckets if we then iterate through the hash. Normally
this is not a problem, but in tests we want deterministic results.
Since it does not matter where we add the entry and it's usually more
probable that a different entry will be accessed next change it to
append to the end of the bucket. Luckily we already iterate throught the
bucket once thus we can easily find the last entry and just connect the
new entry after it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If the current QEMU guest can't wake up from suspend properly,
and we are able to determine that, avoid suspending the guest
at all. To be able to determine this support, QEMU needs to
implement the 'query-current-machine' QMP call. This is reflected
by the QEMU_CAPS_QUERY_CURRENT_MACHINE cap.
If the cap is enabled, a new function qemuDomainProbeQMPCurrentMachine
is called. This is wrapper for qemuMonitorGetCurrentMachineInfo,
where the 'wakeup-suspend-support' flag is retrieved from
'query-current-machine'. If wakeupSuspendSupport is true,
proceed with the regular flow of qemuDomainPMSuspendForDuration.
The absence of QEMU_CAPS_QUERY_CURRENT_MACHINE indicates that
we're dealing with a QEMU version older than 4.0 (which implements
the required QMP API). In this case, proceed as usual with the
suspend logic of qemuDomainPMSuspendForDuration, since we can't
assume whether the guest has support or not.
Fixes: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1759509
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, this command returns a structure with only one member:
'wakeup-suspend-support'. But that's okay. It's what we are after
anyway.
Based-on-work-of: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QEMU commit 46ea94ca9cf ("qmp: query-current-machine with
wakeup-suspend-support") added a new QMP command called
'query-current-machine' that retrieves guest parameters that
can vary in the same machine model (e.g. ACPI support for x86 VMs
depends on the '--no-acpi' option). Currently, this API has a single
flag, 'wakeup-suspend-support', that indicates whether the guest has
the capability of waking up from suspended state.
Introduce a libvirt capability that reflects whether qemu has the
monitor command.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virCgroup struct is always defined and the free function is not calling
anything that would require OS supporting cgroups.
This fixes an issue if we try to start a VM with QEMU binary that
doesn't support QXL. The start operation will fail in
qemuProcessStartValidateVideo() which will set correct error message,
but later in one of the cleanup paths we will call
qemuDomainObjPrivateDataClear() which always calls virCgroupFree()
and that will fail on OS that doesn't support cgroups and it will
set a new error which will be eventually reported to user.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If a bitmap of a shorter length than the data buffer is passed to
virBitmapToDataBuf, it will read off the end of the bitmap and copy junk
into the returned buffer. Add a check to only copy the length of the
bitmap to the buffer.
The problem can be observed after setting a vcpu affinity using the vcpupin
command on a system with a large number of cores:
# virsh vcpupin example_domain 0 0
# virsh vcpupin example_domain 0
VCPU CPU Affinity
---------------------------
0 0,192,197-198,202
Signed-off-by: John Allen <john.allen@amd.com>
Different check values are not ABI compatible. For example
if on migration we change 'full' to 'partial' then guest cpu
on destination can be different.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
If there's an error when setting up QoS on a bridge the control
jumps over to 'err5' label. Here, the virNetDevBandwidthClear()
is called to clear out any partially set QoS. This function can
also report an error which would overwrite the actual error that
caused us jumping here. Use virErrorPreserveLast() to preserve
the original error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu 4.0.0 will prefix most errors with 'Error: ', so consider any
string instance of that an error.
This fixes savevm failure detection when migration is blocked due to
usage of nested VMX
https://bugzilla.redhat.com/show_bug.cgi?id=1697997
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Drop redundant NULL checks, and add an error string prefix
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Replaced usage of virSaveLastError and virSetError/virFreeError with
virErrorPreserveLast and virErrorRestore respectively.
Signed-off-by: Syed Humaid <syedhumaidbinharoon@gmail.com>
The @firmware string is allocated, but never freed.
4 bytes in 1 blocks are definitely lost in loss record 1 of 44
at 0x483579F: malloc (vg_replace_malloc.c:299)
by 0x76FB469: strdup (strdup.c:42)
by 0x497B6DE: virStrdup (virstring.c:966)
by 0x48F6FD3: virConfGetValueString (virconf.c:908)
by 0x4B3E9B6: virVMXGetConfigStringHelper (vmx.c:736)
by 0x4B3EA6B: virVMXGetConfigString (vmx.c:756)
by 0x4B41AEA: virVMXParseConfig (vmx.c:1832)
by 0x10B8E4: testCompareFiles (vmx2xmltest.c:79)
by 0x10BAB8: testCompareHelper (vmx2xmltest.c:124)
by 0x10D058: virTestRun (testutils.c:174)
by 0x10CDDA: mymain (vmx2xmltest.c:288)
by 0x10F11C: virTestMain (testutils.c:1096)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
Allocated in libxlDriverConfigNew(), the @configBaseDir is never
freed.
13 bytes in 1 blocks are definitely lost in loss record 36 of 125
at 0x483579F: malloc (vg_replace_malloc.c:299)
by 0x8012469: strdup (strdup.c:42)
by 0x52926DE: virStrdup (virstring.c:966)
by 0x11D46B: libxlDriverConfigNew (libxl_conf.c:1749)
by 0x114D78: testCompareXMLToDomConfig (libxlxml2domconfigtest.c:62)
by 0x1152A3: testCompareXMLToDomConfigHelper (libxlxml2domconfigtest.c:160)
by 0x115925: virTestRun (testutils.c:174)
by 0x1154A4: mymain (libxlxml2domconfigtest.c:216)
by 0x1179E9: virTestMain (testutils.c:1096)
by 0x1154FD: main (libxlxml2domconfigtest.c:224)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function is not used anymore. Let's remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's funny how this went unnoticed for such a long time. Long
story short, if a domain is configured with
VIR_DOMAIN_NUMATUNE_MEM_STRICT libvirt doesn't really honour
that. This is because of 7e72ac7878 after which libvirt allowed
qemu to allocate memory just anywhere and only after that it used
some magic involving cpuset.memory_migrate and cpuset.mems to
move the memory to desired NUMA nodes. This was done in order to
work around some KVM bug where KVM would fail if there wasn't a
DMA zone available on the NUMA node. Well, while the work around
might stopped libvirt tickling the KVM bug it also caused a bug
on libvirt side: if there is not enough memory on configured NUMA
node(s) then any attempt to start a domain must fail. Because of
the way we play with guest memory domains can start just happily.
The solution is to move the child we've just forked into emulator
cgroup, set up cpuset.mems and exec() qemu only after that.
This basically reverts 7e72ac7878 which was a workaround
for kernel bug. This bug was apparently fixed because I've tested
this successfully with recent kernel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This reverts commit f1d6585300.
Turns out, this caused a regression. There is this (perhaps less
known) semantic of virDomainAttachDevice() where if the device
the API is trying to attach is a CDROM/floppy that is already in
the domain the attach request is handled as 'change the media in
the drive'.
We have a better fix anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This tries to fix the same problem as f1d6585300 but it's doing
so in a less invasive way.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This function checks if given drive address is already present in
passed domain definition. Expose the function as it will be used
shortly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
During initial NIC setup the hypervisor drivers are responsible for
attaching the TAP device to the bridge device. Any fixup after libvirtd
restarts should thus also be their responsibility.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The call to resolve the actual network type will turn any NICs with
type=network into one of the other types. Thus there should be no need
to handle type=network in later switch() statements jumping off the
actual type.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ports allocated on virtual networks with type=nat|route|open all get
given an actual type of 'network'.
Only ports in networks with type=bridge use an actual type of 'bridge'.
This distinction makes little sense since the virtualization drivers
will treat both actual types in exactly the same way, as they're all
just bridge devices a VM needs to be connected to.
This doesn't affect user visible XML since the "actual" device XML
is internal only, but we need code to convert the data upgrades.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetDevBandwidthParse method uses the interface type to decide
whether to allow use of the "floor" parameter. Using the interface
type is not convenient as callers may not have that available, but
still wish to allow use of "floor". Switch to an explicit boolean
to control its usage.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reword error messages to make it clear that the combined floor settings
of all NICs are exceeding the network inbound peak/average
settings. Including the actual values being checked helps to diagnose
what is actually wrong.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In extreme cases libvirt can get mixed up about what VMs are running and
attached to a network leading to the cached floor sum value being
outdated. When this happens the only option is to destroy the network
and then restart libvirtd. If we set floor sum back to zero when
starting the network, we avoid the need for a libvirtd restart at least.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Replaced all virSaveLastError and virSetError/virFreeError usages to
virErrorPreserveLast and virErrorRestore respectively.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Syed Humaid <syedhumaidbinharoon@gmail.com>
The networkPlugBandwidth & networkUnplugBandwidth methods currently take
a virDomainNetDefPtr. To remove the dependency on the domain config
struct, pass individual parameters instead.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All but one of the network types supports port profiles. Rather than
duplicating the code to merge profiles 3 times, do it once and then
later report an error if used from the wrong place.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, VIR_STRDUP() accepts NULL, so there is no need to check
if the string we want to duplicate is not-NULL. Secondly,
virDomainNetSetModelString() also accepts NULL. Thirdly, we have
VIR_AUTOFREE().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
f1056279 removed virDomainSnapshotDef.current and leaved
using vm->current_snapshot only. Later 4819f54bd moved current snapshot
tracking to virDomainSnapshotObjList. As vz driver never used
vm->current_snaphot this patch includes fixes after both commits.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
ACKed-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Wire up the accessor functions necessary for the testsuite to install
an alternative post-parse handler from normal drivers. I could have
modified the signature for virDomainXMLOptionNew() to take another
parameter, but thought it was easier to add a new set function rather
than chase down all existing callers. Until code actually sets the
override, there is no change in behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Move the non-deterministic code that sets snapshot properties
independently of what the incoming XML described to instead live in a
default post-parse function common to virDomainMoment (as checkpoints
will also reuse it in later patches). This patch is just code motion,
with no difference to any callers; but the next patch will further
refactor things to allow for a per-driver override, used by the
testsuite to perform deterministic post-parse actions for better
coverage of parser/formatter code.
Note that the post-parse code is intentionally not run during a
snapshot redefine, since that code path already requires a valid
snapshot name and creation time from the XML.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
None of the existing drivers actually use the 0-valued 'nostate'
snapshot state; rather, it was a fluke of implementation. In fact,
some drivers, like qemu, actively reject 'nostate' as invalid during a
snapshot redefine. Normally, a driver computes the state post-parse
from the current domain, and thus virDomainSnapshotGetXMLDesc() will
never expose the state. However, since the testsuite lacks any
associated domain to copy state from, and lacks post-parse processing
that normal drivers have, the testsuite output had several spots with
the state, coupled with a regex filter to ignore the oddity.
It is better to follow the lead of other XML defaults, by not
outputting anything during format if post-parse defaults have not been
applied, and rejecting the default value during parsing. The testsuite
needs a bit of an update, by adding another flag for when to simulate
a post-parse action of setting a snapshot state, but none of the
drivers are impacted other than rejecting XML that was previously
already suspicious in nature.
Similarly, don't expose creation time 0 (for now, only possible if a
user redefined a snapshot to claim creation at the Epoch, but also
happens once setting the creation time is deferred to a post-parse
handler).
This is also a step towards cleaning up snapshot_conf.c to separate
its existing post-parse work (namely, setting the creationTime and
default snapshot name) from the pure parsing work, so that we can get
rid of the testsuite hack of regex filtering of the XML and instead
have more accurate testing of our parser/formatter code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This requires drivers to opt in to handle the raw modelstr
network model, all others will error if a passed in XML value
is not in the model enum.
Enable this feature for libxl/xen/xm and qemu drivers
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Convert the vbox driver to net model enum, which requires adding
enum values for Am79C970A, Am79C973, 82540EM, 82545EM, 82543GC. We
preserve the same casing that vbox historically used for these model
names.
Remove the now unused virDomainNetStrcaseeqModelString
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Convert the vmware/vmx driver to net model enum, which requires
adding enum values for vlance, vmxnet, vmxnet2, and vmxnet3.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
vbox and vmx drivers do net case insensitive net model comparisons,
so for example 'VMXNET3' and 'vmxnet3' and 'VmxNeT3' in the XML will
translate to the same driver configuration. To convert these drivers
to use net model enum, we will need to do case insensitive comparisons
as well.
Essentially we implement virEnumToString, but with case insensitive
comparison. XML will always be formatted with the enum model string
we track internally, but we will accept any case insensitive variant.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This converts the qemu driver to the net model enum, for all
the model values that we have hardcoded for various checks,
which adds e1000e, virtio-transitional, virtio-non-transitional,
usb-net, spapr-vlan, lan9118, smc91c111
Because the qemu driver has historically also allowed the raw
model string onto the qemu command line, this isn't a full
conversion. Unwinding that will require more thought. However
for all new driver code we should be adding explicit enum
values for any model name we have special handling for.
Remove the now unused virDomainNetStreqModelString
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The bhyve driver only works with the virtio and e1000 models,
which we already have in the enum. Some error reporting is
slightly downgraded to avoid some subtle usage of modelstr
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The vz driver only handles three models: virtio, e1000, and rtl8139.
Add enum values for those models, and convert the vz driver to
handling net->model natively
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This adds a network model enum. The virDomainNetDef property
is named 'model' like most other devices.
When the XML parser or a driver calls NetSetModelString, if
the passed string is in the enum, we will set net->model,
otherwise we copy the string into net->modelstr
Add a single example for the 'netfront' xen model, and wire
that up, just to verify it's all working
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We will be adding a 'model' enum in upcoming patches. Rename
the existing value to make the differentiation clear
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
To ease converting the net->model value to an enum, add
the wrapper functions:
virDomainNetGetModelString
virDomainNetSetModelString
virDomainNetStreqModelString
virDomainNetStrcaseeqModelString
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Switch over to use the new API for re-attaching the bridge device
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the case of a network with forward=bridge, which has a bridge device
listed, we are capable of setting bandwidth limits but fail to call the
function to register them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
hostdevs have a link back to the original network device. This is fairly
generic accepting any type of device, however, we don't intend to make
use of this approach in future. It can thus be specialized to network
devices.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The actual network def was updated to save the bridge name back
in 1.2.11:
commit a360912179
Author: Laine Stump <laine@laine.org>
Date: Fri Nov 21 12:20:37 2014 -0500
network: save bridge name in ActualNetDef when actualType==network too
The chance that someone is running libvirt < 1.2.11 and wants
todo a live upgrade to 5.3.0 without a host reboot is essentially
zero. We can thus reasonably drop the back compat code now.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The APIs for allocating/notifying/removing network ports just take
an internal domain interface struct right now. As a step towards
turning these into public facing APIs, add a virNetworkPtr argument
to all of them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The port allocation APIs are currently called unconditionally for all
types of NIC, but (mostly) only do anything for NICs with type=network.
The exception is the port allocate API which does some validation even
for NICs with type!=network. Relying on this validation is flawed,
however, since the network driver may not even be installed. IOW virt
drivers must not delegate validation to the network driver for NICs
with type != network.
This change allows us to report errors when the virtual network driver
is not registered.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This helps in a scenarios where vCPUs run with a priority that is so high they
might starve the emulator thread. And it also fits with the rest of the
settings.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This will be used later when we want to format emulator scheduler parameters
which don't apply for multiple threads.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This will become useful later when parsing emulatorsched parameters which don't
need the rest of the current function.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Qemu commit 767abe7 ("chardev: forbid 'wait' option with client
sockets") effectively deprecates usage of "wait" with client sockets
starting with qemu 4.0, and earlier versions ignored the value.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Failed new gnutls context allocations in virNetTLSContextNew function
results in double free and segfault. Occasional memory leaks may also
occur.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Adrian Brzezinski <redhat@adrb.pl>
We're setting seclabels on unix sockets but never restoring them.
Surprisingly, we are doing so in SELinux driver.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When writing the VMX file from the domain XML, write the firmware key
according to the firmware autoselection. Though, at the moment only
'efi' is supported.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Convert the firmware key to a type of autoselected firmware.
Only the 'efi' firmware is allowed for now, in case the key is present.
It seems VMware (at least ESXi) does not write the key in VMX files when
setting BIOS as firmware.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
The network driver used to reload the firewall rules whenever a dbus
NameOwnerChanged message for org.fedoraproject.FirewallD1 was
received. Presumably at some point in the past this was successful at
reloading our rules after a firewalld restart. Recently though I
noticed that once firewalld was restarted, libvirt's logs would get this
message:
The name org.fedoraproject.FirewallD1 was not provided by any .service files
After this point, no networks could be started until libvirtd itself
was restarted.
The problem is that the NameOwnerChanged message is sent twice during
a firewalld restart - once when the old firewalld is stopped, and
again when the new firewalld is started. If we try to reload at the
point the old firewalld is stopped, none of the firewalld dbus calls
will succeed.
The solution is to check the new_owner field of the message - we
should reload our firewall rules only if new_owner is non-empty (it is
set to "" when firewalld is stopped, and some sort of epoch number
when it is again started).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When virDBusMessageRead() and virDBusMessageDecode were first added in
commit 834c9c94, they were identical except that virDBusMessageRead()
would unref the message after decoding it.
This difference was eliminated later in commit dc7f3ffc after it
became apparent that unref-ing the message so soon was never the right
thing to do. The two identical functions remained though, with the
tests and virDBus library itself calling the Decode variant, and all
other users calling the Read variant.
This patch eliminates the duplication, switching all users to
virDBusMessageDecode (and moving the nice API documentation comment
from the Read function up to the Decode function).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Support for compiling this version was dropped in an earlier commit.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Support for compiling this version was dropped in an earlier commit.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Support for compiling this version was dropped in an earlier commit.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Support for compiling this version was dropped in an earlier commit.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Support for compiling this version was dropped in an earlier commit.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Support for compiling this version was dropped in an earlier commit.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Support for all the 4.x releases was ended by VirtualBox maintainers in
Dec 2015. Even the "newest" 4.3.40 of those is only supported on old
versions of Linux (Ubuntu <= 13.03, RHEL <= 6, SLES <= 11), which are all
discontinued hosts from libvirt's POV.
We can thus reasonably drop all 4.x support from the libvirt VirtualBox
driver.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since:
commit 9f4e35dc73
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Mar 18 17:31:21 2019 +0000
network: improve error report when firewall chain creation fails
We cache an error when failing to create the top level firewall chains.
This commit failed to account for fact that we may invoke
networkPreReloadFirewallRules() many times while libvirtd is running.
For example when firewalld is restarted.
When this happens the original failure may no longer occurr and we'll
successfully create our top level chains. We failed to clear the cached
error resulting in us failing to start virtual networks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Spotted by Lintian (manpage-has-bad-whatis-entry tag).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We need commit 6280c94f306d in order to fix our generated
man pages.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
My earlier commit be46f61326 was incomplete. It removed caching of
microcode version in the CPU driver, which means the capabilities XML
will see the correct microcode version. But it is also cached in the
QEMU capabilities cache where it is used to detect whether we need to
reprobe QEMU. By missing the second place, the original commit
be46f61326 made the situation even worse since libvirt would report
correct microcode version while still using the old host CPU model
(visible in domain capabilities XML).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for kqemu was dropped in libvirt by commit 8e91a400c and even
back then we never set these capabilities when doing QMP probing.
Since no QEMU we aim to support has these, drop them completely.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In e17d10386 these functions were mistakenly moved into an #ifdef
block, but remained used outside of it leaving the build broken
for platforms where #ifdef evaluated to false.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Model specific registers are a thing only on x86. Also, the
/dev/cpu/0/msr path exists only on Linux and the fallback
mechanism (asking KVM) exists on Linux and FreeBSD only.
Therefore, move the function within #ifdef that checks all
aforementioned constraints and provide a dummy stub for all
other cases.
This fixes the build on my arm box, mingw-* builds, etc.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The NVIDIA V100 GPU has an onboard RAM that is mapped into the
host memory and accessible as normal RAM via an NVLink2 bridge. When
passed through in a guest, QEMU puts the NVIDIA RAM window in a
non-contiguous area, above the PCI MMIO area that starts at 32TiB.
This means that the NVIDIA RAM window starts at 64TiB and go all the
way to 128TiB.
This means that the guest might request a 64-bit window, for each PCI
Host Bridge, that goes all the way to 128TiB. However, the NVIDIA RAM
window isn't counted as regular RAM, thus this window is considered
only for the allocation of the Translation and Control Entry (TCE).
For more information about how NVLink2 support works in QEMU,
refer to the accepted implementation [1].
This memory layout differs from the existing VFIO case, requiring its
own formula. This patch changes the PPC64 code of
@qemuDomainGetMemLockLimitBytes to:
- detect if we have a NVLink2 bridge being passed through to the
guest. This is done by using the @ppc64VFIODeviceIsNV2Bridge function
added in the previous patch. The existence of the NVLink2 bridge in
the guest means that we are dealing with the NVLink2 memory layout;
- if an IBM NVLink2 bridge exists, passthroughLimit is calculated in a
different way to account for the extra memory the TCE table can alloc.
The 64TiB..128TiB window is more than enough to fit all possible
GPUs, thus the memLimit is the same regardless of passing through 1 or
multiple V100 GPUs.
Further reading explaining the background
[1] https://lists.gnu.org/archive/html/qemu-devel/2019-03/msg03700.html
[2] https://www.redhat.com/archives/libvir-list/2019-March/msg00660.html
[3] https://www.redhat.com/archives/libvir-list/2019-April/msg00527.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The NVLink2 support in QEMU implements the detection of NVLink2
capable devices by verifying the attributes of the VFIO mem region
QEMU allocates for the NVIDIA GPUs. To properly allocate an
adequate amount of memLock, Libvirt needs this information before
a QEMU instance is even created, thus querying QEMU is not
possible and opening a VFIO window is too much.
An alternative is presented in this patch. Making the following
assumptions:
- if we want GPU RAM to be available in the guest, an NVLink2 bridge
must be passed through;
- an unknown PCI device can be classified as a NVLink2 bridge
if its device tree node has 'ibm,gpu', 'ibm,nvlink',
'ibm,nvlink-speed' and 'memory-region'.
This patch introduces a helper called @ppc64VFIODeviceIsNV2Bridge
that checks the device tree node of a given PCI device and
check if it meets the criteria to be a NVLink2 bridge. This
new function will be used in a follow-up patch that, using the
first assumption, will set up the rlimits of the guest
accordingly.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This does not cause a problem in usual scenarios thanks to us allowing
CAP_DAC_OVERRIDE for the qemu process, however in some scenarios this might be
an issue because the directory is created with mkdtemp(3) which explicitly
creates that with 0700 permissions and qemu running as non-root cannot access
that.
The scenarios include:
- Builds without CAPNG
- Running libvirtd in certain container configurations [1]
- and possibly others.
[1] https://github.com/kubevirt/kubevirt/pull/2181#issuecomment-481840304
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The new virHostCPUGetMSR internal API will try to read the MSR from
/dev/cpu/0/msr and if it is not possible (the device does not exist or
libvirt is running unprivileged), it will fallback to asking KVM for the
MSR using KVM_GET_MSRS ioctl.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They are static and we will need to call them a little bit closer to the
beginning of the file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The structure can only be used for CPUID data now. Adding a type
indicator and moving the data into a union will let us store alternative
data types.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now works on virCPUx86DataItem and it's called
virCPUx86DataItemMatch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is renamed as virCPUx86DataItemMatchMasked to reflect the
change in parameter types.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now works on virCPUx86DataItem and it's renamed as
virCPUx86DataItemAndBits.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The parameters changed from virCPUx86CPUID to virCPUx86DataItem and the
function is now called virCPUx86DataItemClearBits.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is renamed as virCPUx86DataItemSetBits and it works on
virCPUx86DataItem now.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virCPUx86DataSorter already compares two virCPUx86DataItem structs.
Let's add a tiny wrapper around it called virCPUx86DataCmp and use it
instead of open coded comparisons.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is called virCPUx86DataSorter since the function will work on any CPU
data type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now called virCPUx86DataNext to reflect its purpose: it
is an iterator over CPU data (both CPUID and MSR in the near future).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although vendor string is always reported by CPUID, the container struct
is used for consistency and thus "cpuid" name is not a good fit anymore.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The following patches introduce CPU features read from MSR in addition
to those queried via CPUID instruction. Let's introduce a container
struct which will be able to describe either feature type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU 3.1.0 by commit
c7a88b52f62b30c04158eeb07f73e3f72221b6a8
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Vim has trouble figuring out the filetype automatically because
the name doesn't follow existing conventions; annotations like
the ones we already have in Makefile.ci help it out.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, virCommandRun() does report an error on failure (which
in most cases is more accurate than what we overwrite it with).
Secondly, usually errno is not set (or gets overwritten in the
cleanup code) which makes virReportSystemError() report useless
error messages. Drop all virReportSystemError() calls in cases
like this (I've found three occurrences).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The latter is deprecated and will be removed soon. The advised
replacement is '-overcommit mem-lock=on|off'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Added in QEMU commit of v3.0.0-rc0~48^2~9 (then fixed by
v3.1.0-rc0~119^2~37) QEMU is replacing '-realtime mlock' with
'-overcommit mem-lock'. Add a capability to tell if we're dealing
new new enough qemu to use the replacement.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The '-realtime mlock' cmd line argument was introduced in QEMU
commit v1.5.0-rc0~190 which matches minimal QEMU version we
require. Therefore, the capability will always be present.
Apparently, nearly none of our xml2argv test cases had the
capability hence slightly bigger change under qemuxml2argvdata/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'bandwidths' variable is allocated using VIR_RESIZE_N so it has to
be freed as well.
==118315== 8 bytes in 1 blocks are definitely lost in loss record 299 of 2,401
==118315== at 0x4C29DAD: malloc (vg_replace_malloc.c:308)
==118315== by 0x4C2C100: realloc (vg_replace_malloc.c:836)
==118315== by 0x52C3FAF: virReallocN (viralloc.c:245)
==118315== by 0x52C4079: virExpandN (viralloc.c:294)
==118315== by 0x532BBA8: virResctrlAllocParseProcessMemoryBandwidth (virresctrl.c:1156)
==118315== by 0x532BBA8: virResctrlAllocParseMemoryBandwidthLine (virresctrl.c:1211)
==118315== by 0x532BBA8: virResctrlAllocParse (virresctrl.c:1414)
==118315== by 0x532BBA8: virResctrlAllocGetGroup (virresctrl.c:1446)
==118315== by 0x532C11D: virResctrlAllocGetDefault (virresctrl.c:1464)
==118315== by 0x532D15E: virResctrlAllocAssign (virresctrl.c:1923)
==118315== by 0x532D15E: virResctrlAllocCreate (virresctrl.c:2042)
==118315== by 0x31E1ABEE: qemuProcessResctrlCreate (qemu_process.c:2596)
==118315== by 0x31E1ABEE: qemuProcessLaunch (qemu_process.c:6444)
==118315== by 0x31E1E341: qemuProcessStart (qemu_process.c:6721)
==118315== by 0x31E81315: qemuDomainObjStart.constprop.50 (qemu_driver.c:7288)
==118315== by 0x31E81A65: qemuDomainCreateWithFlags (qemu_driver.c:7341)
==118315== by 0x54DDB4B: virDomainCreate (libvirt-domain.c:6534)
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
A bunch of files include src/rpc/virnetsaslcontext.h, which
in turn includes <sasl/sasl.h>, and without the corresponding
CFLAGS the compiler can't locate the latter if it happens to
be installed outside of the default include path as is the
case, for example, on FreeBSD.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Getting the guest time and hostname both require use of guest agent
commands. These must not be allowed for read-only users, so the
permissions check must validate "write" permission not "read".
Fixes CVE-2019-3886
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainGetHostname API is fetching guest information and this may
involve use of an untrusted guest agent. As such its use must be
forbidden on a read-only connection to libvirt.
Fixes CVE-2019-3886
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Few of the scripts in build-aux are included in EXTRA_DIST. This is not
a serious problem since they are primarily tools intended for developers
upstream, and downstream builds won't need them. Having them missing,
however, complicates downstream patching because it means patches that
are auto-exported from git will fail to apply if they include a change
to a file in build-aux/. By bundling all these scripts in the dist we
make patching more straightforward.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The function open-codes addition into an array. Use the helper instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Demonstrate how VIR_RETURN_PTR is used by refactoring qemu_block.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With the introduction of more and more internal data types which support
VIR_AUTOPTR it's becoming common to see the following pattern:
VIR_AUTOPTR(virSomething) some = NULL
virSomethingPtr ret = NULL;
... (ret is not touched ) ...
VIR_STEAL_PTR(ret, some);
return ret;
This patch introduces a macro named VIR_RETURN_PTR which returns the
pointer directly without the need for an explicitly defined return
variable and use of VIR_STEAL_PTR. Internally obviously a temporary
pointer is created to allow setting the original pointer to NULL so that
the VIR_AUTOPTR function does not free the memory which we want to
actually return.
The name of the temporary variable is deliberately long and complex to
minimize the possibility of collision.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a locally used helper struct but we can make use of automatic
freeing for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 6864d8f740 moved this one level up
for qemuBuildMemoryBackendProps but left qemuBuildMemPathStr intact.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
If a management application wants to use firmware auto selection
feature it can't currently know if the libvirtd it's talking to
support is or not. Moreover, it doesn't know which values that
are accepted for the @firmware attribute of <os/> when parsing
will allow successful start of the domain later, i.e. if the mgmt
application wants to use 'bios' whether there exists a FW
descriptor in the system that describes bios.
This commit then adds 'firmware' enum to <os/> element in
<domainCapabilities/> XML like this:
<enum name='firmware'>
<value>bios</value>
<value>efi</value>
</enum>
We can see both 'bios' and 'efi' listed which means that there
are descriptors for both found in the system (matched with the
machine type and architecture reported in the domain capabilities
earlier and not shown here).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The point of this API is to fetch all FW descriptors, parse them
and return list of supported interfaces and SMM feature for given
combination of machine type and guest architecture.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit a5e1602090.
Getting rid of unistd.h from our headers will require more work than
just fixing the broken mingw build. Revert it until I have a more
complete proposal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
util/virutil.h bogously included unistd.h. Drop it and replace it by
including it directly where needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'viralloc.h' does not provide any type or macro which would be necessary
in headers. Prevent leakage of the inclusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Keeping them with viralloc.h forcibly pulls in the other stuff from
viralloc.h into other header files. This in turn creates a mess
as more and more headers pull in the 'viral' header file.
If we want to make 'viralloc.h' omnipresent we should pick a different
approach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Define VMX_CONFIG_FORMAT_ARGV to replace the hardcoded 'vmware-vmx'
string used by the domxml-X-native APIs. This follows the pattern used
by other drivers.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
Now that the memory disposal is handled automatically we can simplify
the cleanup paths. In this case it's not as simple as sometimes the
value of the called function is returned.
While at it fix the initialization value of the returned variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This commit fixes an unitialized variable to avoid garbage value
when virNetDevBridgeGet method returns error. When, that method fails
before initialize 'val' variable, it can cause problems related to
that.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit b647d2195 introduced a use-after-free situation when the caller
is trying to delete a snapshot and its children: if the callback
function deletes the parent, it is no longer safe to query the parent
to learn which children also need to be deleted (where we previously
saved deleting the parent for last). To fix the problem, while still
maintaining support for topological visits of callback functions, we
have to stash off any information needed for later traversal prior to
using a callback function (virDomainMomentForEachChild already does
this, it is only virDomainMomentActOnDescendant that was running into
problems).
Sadly, the testsuite did not cover the problem at the time. Worse,
even though I later added commit 280a2b41e to catch problems like
this, and even though that test is indeed sufficient to detect the
problem when run under valgrind or suitable MALLOC_PERTURB_ settings,
I'm guilty of not running the test in such an environment. Thus,
v5.2.0 has a regression that could have been prevented had we used the
testsuite to its full power. On the bright side, deleting snapshots
requires ACL domain:snapshot, which is arguably as powerful as
domain:write, so I don't think this use-after-free forms a security
hole.
At some point, it would be nice to convert virDomainMomentObj into a
virObject, at which point, the solution is even simpler: add
virObjectRef/Unref around the callback. But as that will require
auditing even more places in the code, I went with the simplest patch
for the regression fix.
Fixes: b647d2195
Reported-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
A feature with no cpuid element is invalid and it should not be silently
treated as a feature with all CPUID bits set to zero.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The microcode version checks are used to invalidate cached CPU data we
get from QEMU. To minimize /proc/cpuinfo parsing the microcode version
was only read when libvirtd started and cached for the daemon's
lifetime. However, the CPU microcode can change anytime (updating the
microcode package can automatically upload it to the CPU) and we need to
stop caching it to avoid using stale CPU model data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper has solely to do with virObjects. Move it together with
other virObject stuff.
This also avoids the potential problem where VIR_AUTOUNREF uses
virObjectAutoUnref which is defined in virobject.h.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The rules are the same for all virt guests, regardless of the
architecture.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Our PCIe topology depends on the availability of PCIe Root Ports,
so if none of the suitable devices (pcie-root-port, ioh3420) is
compiled into QEMU we should fall back to virtio-mmio rather than
trying to use PCI addresses only to fail immediately afterwards
when we realize we can't use the necessary controllers.
Note that this additional check is basically moot for ARM virt
guests, because PCIe Root Ports were enabled in QEMU builds for
the architecture well before guest OS support had been widely
available; however, the opposite is true for RISC-V, and tweaking
the code this way will allow us to share it between architectures.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Since the STOP event handler can use the pausedReason as sent to
qemuProcessStopCPUs, we no longer need to send duplicate suspended
lifecycle events because we know what caused the stop along with extra
details. This processing allows us to also remove the duplicated state
change from qemuProcessStopCPUs.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Map is based on existing cases in code where we send suspended
event after changing domain state to paused.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Similar to commit [1] which saves and passes the running reason to
the RESUME event handler, during qemuProcessStopCPUs let's save and pass
the pause reason in the domain private data so that the STOP event
handler can use it.
[1] 5dab984ed : qemu: Pass running reason to RESUME event handler
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
If there are two concurrent threads, one of which is removing an
nwfilter from the list and the other is trying to add it back they
may serialize in the following order:
1) obj->removing is set and @obj is unlocked.
2) The tread that's trying to add the nwfilter onto the list locks
the list and tries to find, if the nwfilter already exists.
3) Our lookup functions say it doesn't, so the thread proceeds to
virHashAddEntry() which fails with 'Duplicate key' error.
This is obviously not helpful error message at all.
The problem lies in our lookup function
(virNWFilterBindingObjListFindByPortDevLocked()) which return
NULL even if the object is still on the list. They do this so
that the object is not mistakenly looked up by some API. The fix
consists of moving 'removing' check one level up and thus
allowing virNWFilterBindingObjListAddLocked() to produce
meaningful error message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
If there are two concurrent threads, one of which is removing a
domain from the list and the other is trying to add it back they
may serialize in the following order:
1) vm->removing is set and @vm is unlocked.
2) The tread that's trying to add the domain onto the list locks
the list and tries to find, if the domain already exists.
3) Our lookup functions say it doesn't, so the thread proceeds to
virHashAddEntry() which fails with 'Duplicate key' error.
This is obviously not helpful error message at all.
The problem lies in our lookup functions
(virDomainObjListFindByUUIDLocked() and
virDomainObjListFindByNameLocked()) which return NULL even if the
object is still on the list. They do this so that the object is
not mistakenly looked up by some driver. The fix consists of
moving 'removing' check one level up and thus allowing
virDomainObjListAddLocked() to produce meaningful error message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Parsing of the cpu affinity list was using virParseNumber. Modernize it
to get rid of the virParseNumber call.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1693066
Up until memfd introduction (in 24b74d187c) we did not need to
know @pagesize because qemuGetDomainHupageMemPath() could deal
with it being zero (value of zero means use the default hugetlbfs
mount). But since for memfd we are not passing a path to
hugetlbfs mount rather the page size value we need to know its
value upfront.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper returns the default hugetlbfs mount point from given
array of mount points.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit 66460e3 dropped support for YAJL 1, we no longer need
these.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Now that we do not need to cater to YAJL 1, move the check for the
return value of yajl_gen_alloc earlier, so that we can assume it
was successful in later code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we require YAJL2, drop the code dealing with YAJL 1.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
qemuMigrationSrcPerform callers expect it to call virDomainObjEndAPI
in any case so on error paths we miss the virDomainObjEndAPI call.
To fix this let's make qemuMigrationSrcPerform callers responsible
for the virDomainObjEndAPI call.
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The d_type field cannot be assumed to be filled. Some filesystems, such
as older XFS, will simply report DT_UNKNOWN.
Even if the d_type is filled in, the use of it in the SELinux functions
is dubious. If labelling all files in a directory there's no reason to
skip things which are not regular files. We merely need to skip "." and
"..", which is done by virDirRead() already.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
d_type is a non-portable extension to the struct dirent and even if it
exists, its value may be DT_UNKNOWN if the filesystem doesn't support
it. This is common with older versions of XFS which have ftype=0
feature.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use virJSONValueToBuffer so that we can append the command terminator
string without copying of the string again. Also avoid a 'strlen' as we
can query the buffer use size.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
The internal qemu machinery already logs the sent message via the PROBE
point in qemuMonitorSend and the monitor receive function. Those are way
better as they are easy grepable. Remove the additional ones from the
monitor code which just duplicate the sent data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
We have tests that validate the XML formatter. Additionally almost every
guide tells users to disable JSON logging. Drop logging of output string
in virJSONValueToString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
The last step of the conversion involves copying of the generated JSON
into a separate string. We can use a virBuffer to do this as this will
also allow to subsequently use the buffer when we actually need to do
some other formatting of the string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Use size_t for all sizes. The '*' modifier unfortunately does require an
int so a temporary variable is necessary in the tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
This was meant to stop abusing the members directly, but we don't do
this for other internal structs. Additionally this did not stop the
test from touching the members. Remove the header obscurization.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor code paths which clear strings on cleanup paths to use the
automatic helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
VIR_AUTODISPOSE_STR is similar to VIR_AUTOFREE(char *) but uses
virDispose for clearing of the stored string.
This patch also refactors VIR_DISPOSE to use the new helper which is
used for the new macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'blockdev-snapshot-sync' is present in QEMU since v0.14.0-rc0 and
'transaction' since v1.1.0 (52e7c241ac766406f05fa)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'drive-mirror' command in v1.3.0 (d9b902db3fb71fdc)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'block-commit' command in v1.3.0 (ed61fc10e8c8d2)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was detected by the presence of 'block-stream' which is present in
qemu since v1.1 (db58f9c0605fa151b8c4)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the disk source we need to keep the disk index (which is in
the qemu driver used for identification of the source for block jobs)
for the <mirror> element so that when it's replaced as a disk source
after pivoting all the allocated data is present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the block copy operation is started with a reused external file in
incremental mode libvirt will need to open and insert the backing chain
for that file into qemu (in -blockdev mode). This means that we'll need
to track the backing chain and metadata such as node names for the full
chain of <mirror>.
This patch invokes the full backing chain formatter and parser for
<mirror> so that the chain can be kept with <mirror>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have the proper flags available so we can pass them to the fomatter.
The added bonus is that private data may be formatted into the status
XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper converts the 'type', 'format' and index values to enum
values/numbers and does validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainDiskSourceParse was now just a thin wrapper without any extra
value. Replace all usage of it by the function it calls and remove the
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the check that the format is in range to be standalone and use
the convertor function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the cleanup is handled automatically it can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When adding <migrationSource> I've used a slightly unusual approach. To
allow using the disk source XML parser and formatter convert
<migrationSource> to look like <disk>. This means that <source> will be
added as a subelement of <migrationSource> rather than being formatted
inline.
Conversion from the old format in the parser is very simple as it
involves only moving the XPath context current node slightly if the new
format is found.
The status XML to XML test shows that the upgrade is done correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers including transitive callers through
virDomainDiskSourceFormatInternal always pass true. Remove the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We parse the seclabels and use them internally so omitting them when
formatting would be misleading. Additionally our schema actually allows
them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using copy_on_read for removable disks is a hassle. It also does not
work for CDROMs at all as the image is supposed to be read-only and we
might ignore it for floppies when they are started as empty. Forbid it
for floppies completely rather than trying to support what probably
nobody is using.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Until the block job completes we can't change the disk chain. Removal
would fail as the block job still has reference to the chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unref the config pointer automatically in code paths which get a local
copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainChangeGraphicsPasswords and qemuDomainRemoveHostDevice
don't use 'cfg' any more since commits 4327df7eee and 802c59d4b9
respectively.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Failure of qemuMonitorGetVersion is fatal now that we only support QMP
based qemus. Remove the debug message since we report an error already.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If the detected qemu version is below our required version 'package'
would be leaked.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Move the check out of virQEMUCapsInitQMPMonitor similarly to other
functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Move the code out of virQEMUCapsInitQMPMonitor similarly to other
functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Move the check out of virQEMUCapsInitQMPMonitor similarly to other
functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Some caps are cleared according to some more advanced logic after
detection. Split all that logic out into virQEMUCapsInitProcessCaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
virQEMUCapsInitQMPMonitor is massive now since it collects calls to the
various probing functions and also version based capabilities. Split
out the version based caps into a separate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add hppa, nios2, or1k, riscv32 and riscv64 to the profile.
Fixes: https://bugs.debian.org/914940
Signed-off-by: intrigeri <intrigeri@boum.org>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Check that the attribute is the same in qemuDomainDiskChangeSupported
in case somebody tries to change it using the UpdateDevice API.
https://bugzilla.redhat.com/show_bug.cgi?id=1601677
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
https://bugzilla.redhat.com/show_bug.cgi?id=1601677
This reverts commit 047cfb05ee
Using numeric comparison on strings means we reject every update
that does include the group name, even if it's unchanged.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Even though Coverity can prove that 'last' is always set if the prior
loop executed, gcc 8.0.1 cannot:
CC conf/libvirt_conf_la-virdomainmomentobjlist.lo
../../src/conf/virdomainmomentobjlist.c: In function 'virDomainMomentMoveChildren':
../../src/conf/virdomainmomentobjlist.c:178:19: error: 'last' may be used uninitialized in this function [-Werror=maybe-uninitialized]
last->sibling = to->first_child;
~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
Rewrite the loop to a form that should be easier for static analysis
to work with.
Fixes: ced0898f86
Reported-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
commit edaf13565 modified the stats retrieval for OVS interfaces to
not fail when one of the fields was unrecognized by the ovs-vsctl
command, but ovs-vsctl was still returning an error, and libvirt was
cluttering the logs with these inconsequential error messages.
This patch modifies the GET_STAT macro to add "--if-exists" to the
ovs-vsctl command, which causes it to return an empty string (and exit
with success) if the requested statistic isn't in its database, thus
eliminating the ugly error messages from the log.
Resolves: https://bugzilla.redhat.com/1683175
Signed-off-by: Laine Stump <laine@laine.org>
The warning is reported at a code path which already reports a proper
error so it's pointless to add yet another line into logs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Avoid the extra parameter passing in the disk 'dst' parameter to be
reported instead of the device alias. Using 'dst' instead of alias does
not add much value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainRemoveDiskDevice calls qemuDomainReleaseDeviceAddress which
already calls virDomainUSBAddressRelease so we don't need to call it
again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
There is one specific caller (testInfoSetArgs() in
qemuxml2argvtest.c) which expect the va_list argument to change
after returning from the virQEMUCapsSetVAList() function.
However, since we are passing plain va_list this is not
guaranteed. The man page of stdarg(3) says:
If ap is passed to a function that uses va_arg(ap,type), then
the value of ap is undefined after the return of that function.
(ap is a variable of type va_list)
I've seen this in action in fact: on i686 the qemuxml2argvtest
fails on the second test case because testInfoSetArgs() sees
ARG_QEMU_CAPS and calls virQEMUCapsSetVAList to process the
capabilities (in this case there's just one
QEMU_CAPS_SECCOMP_BLACKLIST). But since the changes are not
reflected in the caller, in the next iteration testInfoSetArgs()
sees the QEMU capability and not ARG_END.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 6b90a84738.
It turns out gcc -O2 is not happy with it, complaining:
/home/pipo/libvirt/src/qemu/qemu_driver.c: In function 'qemuDomainSnapshotCreateXML':
/home/pipo/libvirt/src/qemu/qemu_driver.c:15389:26: error: potential null pointer dereference [-Werror=null-dereference]
bool memory = snapdef->memory == VIR_DOMAIN_SNAPSHOT_LOCATION_EXTERNAL;
~~~~~~~^~~~~~~~
/home/pipo/libvirt/src/qemu/qemu_driver.c:15389:26: error: potential null pointer dereference [-Werror=null-dereference]
In file included from /home/pipo/libvirt/src/util/virbuffer.h:27,
from /home/pipo/libvirt/src/conf/capabilities.h:27,
from /home/pipo/libvirt/src/conf/domain_conf.h:32,
from /home/pipo/libvirt/src/qemu/qemu_agent.h:26,
from /home/pipo/libvirt/src/qemu/qemu_driver.c:40:
/home/pipo/libvirt/src/util/viralloc.h:125:34: error: potential null pointer dereference [-Werror=null-dereference]
# define VIR_ALLOC_N(ptr, count) virAllocN(&(ptr), sizeof(*(ptr)), (count), true, \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
VIR_FROM_THIS, __FILE__, __FUNCTION__, __LINE__)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/pipo/libvirt/src/qemu/qemu_driver.c:15103:9: note: in expansion of macro 'VIR_ALLOC_N'
if (VIR_ALLOC_N(ret, snapdef->ndisks) < 0)
^~~~~~~~~~~
/home/pipo/libvirt/src/qemu/qemu_driver.c:15798:45: error: null pointer dereference [-Werror=null-dereference]
virDomainSnapshotObjGetDef(snap)->memory == VIR_DOMAIN_SNAPSHOT_LOCATION_EXTERNAL) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~
As the patch simplified one or two callers at the risk of making
many other callers now candidates to trigger aggressive compiler
warnings, it isn't worth it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use the common base class virDomainMoment for iterator callbacks
related to snapshots from the qemu code, so that when checkpoint
operations are introduced, they can share the same callbacks.
Simplify the code for qemuDomainSnapshotCurrent by better utilizing
virDomainMoment helpers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemu driver already had a full-blown virDomainMomentObjPtr to
check against, and the test driver ought to have one since we get
better error checking that the user passed in a valid object. Removes
the need for a helper function added in commit commit 4819f54b.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The VIR_MIGRATE_PARALLEL flag is implemented using QEMU's multifd
migration capability and the corresponding multifd-channels migration
parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Prepare for introducing a bunch of new public APIs related to
backup checkpoints by first introducing a new internal type
and errors associated with that type. Checkpoints are modeled
heavily after virDomainSnapshotPtr (both represent a point in
time of the guest), although a snapshot exists with the intent
of rolling back to that state, while a checkpoint exists to
make it possible to create an incremental backup at a later
time.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since I was copying this text to form checkpoint XML and API
documentation, I might as well make improvements along the way. Most
of these changes are based on reviews of the checkpoint docs.
Among other things: grammar tweaks, point to a single source of
documentation rather than repeating verbosity, reword things for
easier legibility.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 86c0ed6f70, and
subsequent refactorings of the function into new files. There are no
callers of this function - I had originally proposed it for
implementing a new bulk snapshot API, but that proved to be too
invasive given RPC limits. I also tried using it for streamlining how
the qemu driver stores snapshot state across libvirtd restarts
internally, but in the end, the risks of a new internal format
outweighed the benefits of one file per snapshot.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 1b57269cbc, and
subsequent refactorings of the function into new files. There are no
callers of this function - I had originally proposed it for
implementing a new bulk snapshot API, but that proved to be too
invasive given RPC limits. I also tried using it for streamlining how
the qemu driver stores snapshot state across libvirtd restarts
internally, but in the end, the risks of a new internal format
outweighed the benefits of one file per snapshot.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For [some unknown reason, possibly/probably pure chance], Net devices
have been taken offline and their bandwidth tc rules cleared as the
very first operation when detaching the device. This is contrary to
every other type of device, where all hostside teardown is delayed
until we receive the DEVICE_DELETED event back from qemu, indicating
that the guest has finished with the device.
This patch delays these two operations until receipt of
DEVICE_DELETED, which removes an ugly wart from
qemuDomainDetachDeviceLive(), and also seems to be a more correct
sequence of events.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
The VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED event is sent after qemu has
responded to a device_del command with a DEVICE_DELETED event. Before
queuing the event, *some* of the final teardown of the device's
trappings in libvirt is done, but not *all* of it. As a result, an
application may receive and process the DEVICE_REMOVED event before
libvirt has really finished with it.
Usually this doesn't cause a problem, but it can - in the case of the
bug report referenced below, vdsm is assigning a PCI device to a guest
with managed='no', using livirt's virNodeDeviceDetachFlags() and
virNodeDeviceReAttach() APIs. Immediately after receiving a
DEVICE_REMOVED event from libvirt signalling that the device had been
successfully unplugged, vdsm would cal virNodeDeviceReAttach() to
unbind the device from vfio-pci and rebind it to the host driverm but
because the event was received before libvirt had completely finished
processing the removal, that device was still on the "activeDevs"
list, and so virNodeDeviceReAttach() failed.
Experimentation with additional debug logs proved that libvirt would
always end up dispatching the DEVICE_REMOVED event before it had
removed the device from activeDevs (with a *much* greater difference
with managed='yes', since in that case the re-binding of the device
occurred after queuing the device).
Although the case of hostdev devices is the most extreme (since there
is so much involved in tearing down the device), *all* device types
suffer from the same problem - the DEVICE_REMOVED event is queued very
early in the qemuDomainRemove*Device() function for all of them,
resulting in a possibility of any application receiving the event
before libvirt has really finished with the device.
The solution is to save the device's alias (which is the only piece of
info from the device object that is needed for the event) at the
beginning of processing the device removal, and then queue the event
as a final act before returning. Since all of the
qemuDomainRemove*Device() functions (except
qemuDomainRemoveChrDevice()) are now called exclusively from
qemuDomainRemoveDevice() (which selects which of the subordinates to
call in a switch statement based on the type of device), the shortest
route to a solution is to doing the saving of alias, and later
queueing of the event, in the higher level qemuDomainRemoveDevice(),
and just completely remove the event-related code from all the
subordinate functions.
The single exception to this, as mentioned before, is
qemuDomainRemoveChrDevice(), which is still called from somewhere
other than qemuDomainRemoveDevice() (and has a separate arg used to
trigger different behavior when the chr device has targetType ==
GUESTFWD), so it must keep its original behavior intact, and must be
treated differently by qemuDomainRemoveDevice() (similar to the way
that qemuDomainDetachDeviceLive() treats chr and lease devices
differently from all the others).
Resolves: https://bugzilla.redhat.com/1658198
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Now that all the qemuDomainDetachPrep*() functions look nearly
identical at the end, we can put one copy of that identical code in
qemuDomainDetachDeviceLive() at the point after the individual prep
functions have been called, and remove the duplicated code from all
the prep functions. The code to locate the target "detach" device
based on the "match" device remains, as do all device-type-specific
validations.
Unfortunately there are a few things going on at once in this patch,
which makes it a bit more difficult to follow than the others; it was
just impossible to do the changes in stages and still have a
buildable/testable tree at each step.
The other changes of note:
* The individual prep functions no longer need their driver or async
args, so those are removed, as are the local "ret" variables, since
in all cases the functions just directly return -1 or 0.
* Some of the prep functions were checking for a valid alias and/or
for attempts to detach a multifunction PCI device, but not all. In
fact, both checks are valid (or at least harmless) for *all* device
types, so they are removed from the prep functions, and done a
single time in the common function.
(any attempts to *create* an alias when there isn't one has been
removed, since that is doomed to failure anyway; the only way the
device wouldn't have an alias is if 1) the domain was created by
calling virsh qemu-attach to attach an existing qemu process to
libvirt, and 2) the qemu command that started said process used "old
style" arguments for creating devices that didn't have any device
ids. Even if we constructed a device id for one of these devices,
qemu wouldn't recognize it in the device_del command anyway, so we
may as well fail earlier with "device missing alias" rather than
failing later with "couldn't delete device net0".)
* Only one type of device has shutdown code that must not be called
until after *all* validation of the device is done (including
checking for multifunction PCI and valid alias, which is done in the
toplevel common code). For this reason, the Net function has been
split in two, with the 2nd half (qemuDomainDetachShutdownNet())
called from the common function, right before sending the delete
command to qemu.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Although all hotpluggable devices other than lease, controller,
watchdof, and vsock can be audited, and *are* audited when an unplug
is successful, only disk, net, and hostdev were actually being audited
on failure.
This patch corrects that omission.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
This function can be called with a virDomainDevicePtr and whether or
not the removal was successful, and it will call the appropriate
virDomainAudit*() function with the appropriate args for whatever type
of device it's given (or do nothing, if that's appropriate). This
permits generalizing some code that currently has a separate copy for
each type of device.
NB: Although the function initially will be called only with
success=false, that has been made an argument so that in the future
(when the qemuDomainRemove*Device() functions have had their common
functionality consolidated into qemuDomainRemoveDevice()), this new
common code can call qemuDomainRemoveAuditDevice() for all types.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainDetachDeviceChr and qemuDomainDetachDeviceLease are more
consistent with each other.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Most of these functions will soon contain only some setup for
detaching the device, not the detach code proper (since that code is
identical for these devices). Their device specific functions are all
being renamed to qemuDomainDetachPrep*(), where * is the
name of that device's data member in the virDomainDeviceDef
object.
Since there will be other code in qemuDomainDetachDeviceLive() after
the calls to qemuDomainDetachPrep*() that could still fail, we no
longer directly set "ret" with the return code from
qemuDomainDetachPrep*() functions, but simply return -1 on
failure, and wait until the end of qemuDomainDetachDeviceLive() to set
ret = 0.
Along with the rename, qemuDomainDetachPrep*() functions are also
given similar arglists, including an arg called "match" that points to
the proto-object of the device we want to delete, and another arg
"detach" that is used to return a pointer to the actual object that
will be (for now *has been*) detached. To make sure these new args
aren't confused with existing local pointers that sometimes had the
same name (detach), the local pointer to the device is now named after
the device type ("controller", "disk", etc). These point to the same
place as (*detach)->data.blah, it's just easier on the eyes to have,
e.g., "disk->dst" rather than "(*detach)->data.disk-dst".
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
The Chr and Lease devices have detach code that is too different from
the other device types to handle with common functionality (which will
soon be added at the end of qemuDomainDetachDeviceLive(). In order to
make this difference obvious, move the cases for those two device
types to the top of the switch statement in
qemuDomainDetachDeviceLive(), have the cases return immediately so the
future common code at the end of the function will be skipped, and
also include some hopefully helpful comments to remind future
maintainers why these two device types are treated differently.
Any attempt to detach an unsupported device type should also skip the
future common code at the end of the function, so the case for
unsupported types is similarly changed from a simple break to a return
-1.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
I'm about to add a second virDomainDeviceDef to this function that
will point to the actual device in the domain object. while this is
just a partially filled-in example of what to look for. Naming it
match will make the code easier to follow.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
These are no longer called from qemu_driver.c, since the function that
called them (qemuDomainDetachDeviceLive()) has been moved to
qemu_hotplug.c, and they are no longer called from testqemuhotplug.c
because it now just called qemuDomainDetachDeviceLive() instead of all
the subordinate functions.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainDetachDeviceLive() is called from two places in
qemu_driver.c, and qemuDomainUpdateDeviceList() is called from the
end of qemuDomainDetachDeviceLive(), which is now in qemu_hotplug.c
This patch replaces the single call to qemuDomainUpdateDeviceList()
with two calls to it immediately after return from
qemuDomainDetachDeviceLive(). This is only done if the return from
that function is exactly 0, in order to exactly preserve previous
behavior.
Removing that one call from qemuDomainDetachDeviceList() will permit
us to call it from the test driver hotplug test, replacing the
separate calls to qemuDomainDetachDeviceDiskLive(),
qemuDomainDetachChrDevice(), qemuDomainDetachShmemDevice() and
qemuDomainDetachWatchdog(). We want to do this so that part of the
common functionality of those three functions (and the rest of the
device-specific Detach functions) can be pulled up into
qemuDomainDetachDeviceLive() without breaking the test. (This is done
in the next patch).
NB: Almost certainly this is "not the best place" to call
qemuDomainUpdateDeviceList() (actually, it is provably the *wrong*
place), since it's purpose is to retrieve an "up to date" list of
aliases for all devices from qemu, and if the guest OS hasn't yet
processed the detach request, the now-being-removed device may still
be on that list. It would arguably be better to instead call
qemuDomainUpdateDevicesList() later during the response to the
DEVICE_DELETED event for the device. But removing the call from the
current point in the detach could have some unforeseen ill effect due
to changed timing, so the change to move it into
qemuDomainRemove*Device() will be done in a separate patch (in order
to make it easily revertible in case it causes a regression).
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainDetachDeviceControllerLive() just checks if the controller
type is SCSI, and then either returns failure, or calls
qemuDomainDetachControllerDevice().
Instead, lets just check for type != SCSI at the top of the latter
function, and call it directly.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
This function is going to take on some of the functionality of its
subordinate functions, which all live in qemu_hotplug.c.
qemuDomainDetachDeviceControllerLive() is only called from
qemuDomainDetachDeviceLive() (and will soon be merged into
qemuDomainDetachControllerDevice(), which is in qemu_hotplug.c), so
it is also moved.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
They were added in qemu commit 7572150c189c6553c2448334116ab717680de66d
released in v0.14.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than hard-coding the snapshot filter bit values into the
generic code, add another layer of indirection: callers must map which
of their public filter bits correspond to supported moment bits, then
pass two separate flags (the ones translated for moment code to
operate on, and the remaining ones for the filter callback to operate
on).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The Attach and Detach Lease functions were together in the middle of
the Detach functions. Put them at the end of their respective
sections, since they behave differently from the other attach/detach
functions (DetachLease doesn't use qemuDomainDeleteDevice(), and is
always synchronous).
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
There were two outliers at the end of the file beyond the Vcpu
functions.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It was sitting down in the middle of all the qemuDomainDetach*()
functions. Move it up with the rest of the qemuDomain*Graphics*()
functions.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It's now only called from one place, and combining the two functions
highlights the similarity with Detach functions for other device
types.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Back in the bad old days different device types required a different
qemu monitor call to detach them, and so an <interface type='hostdev'>
needed to call the function for detaching hostdevs, while other
<interface> types could be deleted as netdevs.
Times have changed, and *all* device types are detached by calling the
common function qemuDomainDeleteDevice(vm, alias), so we don't need to
differentiate between hostdev interfaces and the others for that
reason.
There are a few other netdev-specific functions called during
qemuDomainDetachNetDevice() (clearing bandwidth limits, stopping the
interface), but those turn into NOPs when type=hostdev, so they're
safe to call for type=hostdev.
The only thing that is different + not a NOP is the call to
virDomainAudit*() when qemuDomainDeleteDevice() fails, so if we add a
conditional for that small bit of code, we can eliminate the callout
from qemuDomainDetachNetDevice() to qemuDomainDetachThisDevice(),
which makes this function fit the desired pattern for merging with the
other detach functions, and paves the way to simplifying
qemuDomainDetachHostDevice() too.
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
qemuDomainDetachDiskDevice() is only called from one place. Moving the
contents of the function to that place makes
qemuDomainDetachDiskLive() more similar to the other Detach functions
called by the toplevel qemuDomainDetachDevice().
The goal is to make each of the device-type-specific functions do this:
1) find the exact device
2) do any device-specific validation
3) do general validation
4) do device-specific shutdown (only needed for net devices)
5) do the common block of code to send device_del to qemu, then
optionally wait for a corresponding DEVICE_DELETED event from
qemu.
with the final aim being that only items 1 & 2 will remain in each
device-type-specific function, while 3 & 5 (which are the same for
almost every type) will be de-duplicated and moved to the toplevel
function that calls all of these (qemuDomainDetachDeviceLive(), which
will also contain a callout to the one instance of (4) (netdev).
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
