There are some paths (e.g. /dev/vfio/vfio or /dev/mapper/control)
which are defined in qemu_domain.c and then in qemu_cgroup.c
again. This is suboptimal. Let's move paths into qemu_domain.h and
drop duplicate definitions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In my review of 89320788ac I've simplified assigning disk errors
too much as the code I've changed it to will set
VIR_DOMAIN_DISK_ERROR_NONE. This is in contradiction with our
documentation which specifies that disks with no errors are not
reported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If something goes wrong in testDomainGetDiskErrors() then we try
to free any strings that were previously allocated in return
array. Problem is, in my review of original patch (89320788ac)
I've mistakenly did some changes which result in possible NULL
dereference (@vm is set to NULL as the first thing under cleanup
label).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This reverts commit fc3990c7e6.
Now that all the reported bugs are fixed let's turn the feature
back on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A simple helper function that would be used from DAC and SELinux
drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The purpose of this API is to allow caller move XATTRs (or remove
them) from one file to another. This will be needed when moving
top level of disk chain (either by introducing new HEAD or
removing it).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This effectively reverts d7420430ce and adds new code.
Here is the problem: Imagine a file X that is to be shared
between two domains as a disk. Let the first domain (vm1) have
seclabel remembering turned on and the other (vm2) has it turned
off. Assume that both domains will run under the same user, but
the original owner of X is different (i.e. trying to access X
without relabelling leads to EPERM).
Let's start vm1 first. This will cause X to be relabelled and to
gain new attributes:
trusted.libvirt.security.ref_dac="1"
trusted.libvirt.security.dac="$originalOwner"
When vm2 is started, X will again be relabelled, but since the
new label is the same as X already has (because of vm1) nothing
changes and vm1 and vm2 can access X just fine. Note that no
XATTR is changed (especially the refcounter keeps its value of 1)
because the vm2 domain has the feature turned off.
Now, vm1 is shut off and vm2 continues running. In seclabel
restore process we would get to X and since its refcounter is 1
we would restore the $originalOwner on it. But this is unsafe to
do because vm2 is still using X (remember the assumption that
$originalOwner and vm2's seclabel are distinct?).
The problem is that refcounter stored in XATTRs doesn't reflect
the actual times a resource is in use. Since I don't see any easy
way around it let's just not store original owner on shared
resources. Shared resource in world of domain disks is:
- whole backing chain but the top layer,
- read only disk (we don't require CDROM to be explicitly
marked as shareable),
- disk marked as shareable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just like previous commit allowed to enable or disable owner
remembering for each individual path, do the same for SELinux
driver. This is going to be needed in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
One caller in particular (virSecurityDACSetImageLabelInternal)
will want to have the feature turned on only in some cases.
Introduce @remember member to _virSecurityDACChownItem to track
whether caller wants to do owner remembering or not.
The actual remembering is then enabled if both caller wanted it
and the feature is turned on in the config file.
Technically, we could skip over paths that don't have remember
enabled when creating a list of paths to lock. We won't touch
their XATTRs after all. Well, I rather play it safe and keep them
on the locking list for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Both DAC and SELinux drivers support transactions. Each item on
the transaction list consists of various variables and @restore
is one of them. Document it so that as the list of variables grow
it's easier to spot which variable does what.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The way that virSecurityDACRecallLabel is currently written is
that if XATTRs are not supported for given path to the caller
this is not different than if the path is still in use. The value
of 1 is returned which makes secdrivers skip label restore.
This is clearly a bug as we are not restoring labels on say NFS
even though previously we were.
Strictly speaking, changes to virSecurityDACRememberLabel are not
needed, but they are done anyway so that getter and setter behave
in the same fashion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's better to have the function report errors, because none of
the callers does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's better to have the function report errors, because none of
the callers does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The way that security drivers use XATTR is kind of verbose. If
error reporting was left for caller then the caller would end up
even more verbose.
There are two places where we do not want to report error if
virFileGetXAttr fails. Therefore virFileGetXAttrQuiet is
introduced as an alternative that doesn't report errors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Just like it's DAC counterpart is doing,
virSecuritySELinuxRestoreAllLabel() could print @migrated in the
debug message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This test is beautiful. It checks if we haven't messed up
refcounting on security labels (well, XATTRs where the original
owner is stored). It does this by setting up tracking of XATTR
setting/removing into a hash table, then calling
qemuSecuritySetAllLabel() followed by immediate
qemuSecurityRestoreAllLabel() at which point, the hash table must
be empty. The test so beautifully written that no matter
what you do it won't fail. The reason is that all seclabel work
is done in a child process. Therefore, the hash table in the
parent is never changed and thus always empty.
There are two reasons for forking (only one of them makes sense
here though):
1) namespaces - when chown()-ing a file we have to fork() and
make the child enter desired namespace,
2) locking - because of exclusive access to XATTRs we lock the
files we chown() and this is done in a fork (see 207860927a for
more info).
While we want to fork in real world, we don't want that in a test
suite. Override virProcessRunInFork() then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 5a148ce84 altered the virNetServerNew to remove a parameter
but neglected to update the ATTRIBUTE_NONNULL's which causes a build
failure for when checking is enabled such as when lv_cv_static_analysis
is enabled.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Because of a systemd delegation policy [1] we should not write to any
cgroups files owned by systemd which in case of cgroups v2 includes
'cgroups.subtree_control'.
systemd will enable controllers automatically for us to have them
available for VM cgroups.
[1] <https://github.com/systemd/systemd/blob/master/docs/CGROUP_DELEGATION.md>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 7bca1c9bdc.
As it turns out it's not a good idea on systemd hosts. The root
cgroup can have all controllers enabled but they don't have to be
enabled for sub-cgroups.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 226094fbc4.
A deprecation is a warning to something that use of a feature is
being discouraged. By definition it is not an error condition to
continue to use a deprecated feature.
A VIR_ERR_DEPRECATED constant thus makes no conceptual sense. For
features which are entirely absent we already document that the
VIR_ERR_NO_SUPPORT code will be used. There is no need to distinguish
between a feature which never existed and a feature which previously
existed and was since removed.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The public API entry points will report VIR_ERR_NO_SUPPORT to the
caller when a driver does not provide an implementation of a particular
method.
When deleting methods, leaving the driver API entry point explicitly
set to NULL with an version range comment, allows the hvsupport.html
page to document when the AP was removed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since c257352797 a reference of 'cfg' would be leaked if the function
does not need to process anything. Fix it by using VIR_AUTOUNREF.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
when a disk without PR perform attach or detach operation,
need not call qemuHotplugRemoveManagedPR, otherwise, it will
print err log about PR, let us fix it.
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The sys/sysctl.h header is only needed on BSD platforms to get
the sysctlbyname() function declaration. On Linux we talk to
procfs instead to change sysctls.
Unfortunately a legacy sys/sysctl.h header does exist on Linux
and including it has recently started triggering a deprecation
warning from glibc.
Protect its inclusion with a HAVE_SYSCTLBYNAME check instead
so that it only gets used on platforms where we need that
function declaration.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When detecting available controllers on host we can be limited by list
of controllers from qemu.conf file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently CPU controller cannot be enabled if there is any real-time
task running and is assigned to non-root cgroup which is the case on
several distributions with graphical environment.
Instead of erroring out treat it as the controller is not available.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to skip controllers that we are not able to activate we need
to return different return value so the caller can decide what to do.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It might happen that we are not able to enable CPU controller so we
can enable it for thread sub-cgroups only if it's available in parent
cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The assumption that CPU controller would be always enabled is wrong, we
should use any available controller to create a new sub-cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This affects only cgroups v2 where enabled controllers are not based on
available mount points but on the list provided in cgroup.controllers
file. However, moving it will fill in placement as well, so it needs
to be freed together with mount point if we don't need that controller.
Before this patch we were assuming that all controllers available in
root cgroup where available in all other sub-cgroups which was wrong.
In order to fix it we need to move the cgroup controllers detection
after cgroup placement was prepared in order to build correct path for
cgroup.controllers file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In cgroups v2 we don't have to detect available controllers every single
time if we are creating a new cgroup based on parent cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our code would skip adding the default type in this cases, but since we
know that the only reasonable option here is 'fat' we can add it while
starting the VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage volume may in fact convert into a directory when starting
the VM so that it may be actually possible to use it.
This is a regression caused by c9b27af32d as moving the check to
validation time without adjustment causes problems as the volumes are
not translated yet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBuildDriveSourceStr omits the disk format string when we are
emulating a 'fat' filesystem from a directory. The logic should decide
based on the 'actualType' as a disk type=pool may be converted to a
directory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virStorageSourceGetActualType would return VIR_STORAGE_TYPE_NONE in case
when a virStorageSource of (top level) type VIR_STORAGE_TYPE_VOLUME was
not prepared to use by the vm by calling
virDomainDiskTranslateSourcePool.
Fix this issue by returning VIR_STORAGE_TYPE_VOLUME in case when the
volume was not translated yet.
Additionally also add documentation for the function describing the
quirk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The field is set just before returning on success.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When changing media using blockdev-add we need to remove the leftovers
if we didn't succeed plugging in the full chain or closing the tray.
Otherwise the data structures will be freed and thus the backing chain
members will never be unplugged.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As this conversion removes the last use of qemuHotplugDiskSource*
functions we can remove all of them now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helpers for removing the backing chain in case when
-blockdev is used. For -drive this function has a local implementation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the use of qemuHotplugDiskSourceAttach* helpers with
qemuBuildStorageSourceChainAttachPrepare(Blockdev|Drive).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the open-coded local implementation with
qemuBuildStorageSourceChainAttachPrepare(Drive|Blockdev).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These are meant to replace the ad-hoc helpers qemuHotplugDiskSourceAttach...
and the open-coded version in qemu_command.c for use in command line
generation.
The functions for preparing for attach of chains unfortunately need to
be in qemu_command.c as they use function defined by that file and
inclusion hierarchy.
In this patch new functions are introduced and subsequent patches then
refactor individual parts to use them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We use only one copy-on-read filter per disk, so we should handle it
separately from the chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it to qemu_block.c and call it qemuBlockStorageSourceDetachPrepare.
It will be reused in other parts as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've deprecated qemuConnectDomainXMLFromNative qemuDomainQemuAttach.
Switch the error code from VIR_ERR_OPERATION_UNSUPPORTED to the new
VIR_ERR_DEPRECATED.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow a simple programatic check that a given feature is no longer
supported by introducing a separate error code for this scenario.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit a7fb2258 added sanitization of storage pool target paths,
however source dir paths were left unsanitized.
A netfs pool with:
<source>
<host name='10.20.30.40'/>
<dir path='/nfs/'/>
</source>
will not be correctly detected as mounted by
virStorageBackendFileSystemIsMounted, because it shows up in the
mount list without the trailing slash.
Sanitize the source dir as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1723247
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The function modifies the context but did not care to restore it back.
If a <seclabel> was used on a disk, the <privateData> would not be
parsed.
Use VIR_XPATH_NODE_AUTORESTORE and add a test case to validate that
everything works.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add omitted comma for multiple hosts.
Fixes: cdd362e0e7
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit 9c9620af called x86DataAdd without checking for an error,
so add the error checking.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 56b254dcc called virCPUx86DataAdd, but returned -1 directly
without calling the virCPUx86DataFree.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Trivial change. Adding the name of the device that has an
unknown PCI header type in that function helps when debugging
PCI code.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 7bf679ae removed the @json argument from the qemuMonitorOpen
prototype; however, it did not update the ATTRIBUTE_NONNULL value
which causes a build failure for when checking is enabled such as
when lv_cv_static_analysis is enabled.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In the virStorageSourceChainHasManagedPR() function we iterate
over whole backing chain trying to determine if one of the layers
has managed PR configured. But due to a typo we in fact check the
top layer only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The files for libvirt-net-rpc-server.la refernce the sasl/sasl.h
system header but never used the $(SASL_CFLAGS) variable. This
was never noticed previously because the $(AVAHI_CLFAGS) were
set and these typically pulled in the same include directory.
When mDNS/Avahi support was removed this exposed the bug which
caused FreeBSD builds to break as /usr/local/include was no
longer searched for headers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Filter out the given capabilities and set domain taint if we've done so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when e.g. a new feature breaks upstream behaviour it's useful
to allow users to disable the new feature to verify the regression and
possibly use it as a workaround until a fix is available.
The new qemu.conf option named "capability_filters" allows to remove
qemu capabilities from the detected bitmap.
This patch introduces the configuration infrastructure to parse the
option and pass it around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For testing purposes it's sometimes desired to be able to control the
presence of capabilities of qemu. This adds the possibility to do this
via the qemu namespace.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly how we allow adding arbitrary command line arguments and
environment variables this patch introduces the ability to control
libvirt's perception of the qemu process by tweaking the capability bits
for testing purposes.
The idea is to allow developers and users either test a new feature by
enabling it early or disabling it to see whether it introduced
regressions.
This feature is not meant for production use though, so users should
handle it with care.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will allow enabling/disabling custom hypervisor
features for debugging/testing purposes via the qemu namespace.
Add a taint flag where we will flag such a domain so it's obvious what's
happening.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify the main function by splitting out how we parse the extra
passthrough environment variables.
Note that the validation function checks that the first letter must be a
character or underscore which makes the check whether the name is
redundant.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify the main function by splitting out how we parse the extra
passthrough commandline arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu_conf.c deals with the configuration file. Better fit for the
structure and freeing function will be qemu_domain.c where the rest of
the namespace parsing/formatting stuff resides.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The data injected via the namespace may contain also other things than
commandline passthrough definitions. Rename it to make it more
universal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In kernel 4.12 there was introduced new BFQ scheduler and in kernel
5.0 the old CFQ scheduler was removed. This has an implication on
the cgroups file names.
If the CFQ controller is enabled we use one file:
io.weight
The new BFQ controller expose one file with different name:
io.bfq.weight
Except for different name they have different syntax.
io.weight:
default $val
major:minor $val
io.bfq.weight:
$val
The difference is that BFQ doesn't support per-device weight.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In kernel 4.12 there was introduced new BFQ scheduler and in kernel
5.0 the old CFQ scheduler was removed. This has an implication on
the cgroups file names.
If the CFQ controller is enabled we use these two files:
blkio.weight
blkio.weight_device
The new BFQ controller expose only one file with different name:
blkio.bfq.weight
The reason is that BFQ controller doesn't support per-device weight.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we need to get a path of specific file and we need to check its
existence before we use it then we can reuse that path to get value
for specific device. This way we will not build the path again in
virCgroupGetValueForBlkDev.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we need to get a path of specific file and we need to check its
existence before we use it then we can reuse that path to get/set
values instead of calling the existing get/set value functions which
would be building the path again.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We currently refuse to connect to remote libvirtd over SSH if we see the
path ends in /session. Earlier on though we checked for /session and set
the VIR_DRV_OPEN_REMOTE_USER flag. There is one subtle distinction
though with the test driver. All test URIs are marked with this flag,
regardless of whether the URI indicates a local or remote connection.
Previously a local connection to the test driver would have used the
unprivileged libvirtd while a remote connection would have tried the
privileged libvirtd. With this we are consistent and use the
unprivileged for both local & remote, if the current user is non-root.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the VIR_DRV_OPEN_REMOTE_USER flag is only set when we identify
that we're connecting to a local libvirtd daemon. We would like to be
able to set that even if connecting to a remote libvirtd daemon. This
entails refactoring the conditional check.
One subtle change is that the VIR_DRV_OPEN_REMOTE_USER is now set when
the test+XXX:// URI is used, even if a servername is present. This has
no effect in this patch, but will later.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirtd has long had integration with avahi for advertising libvirtd
using mDNS when TCP/TLS listening is enabled. For a long time the
virt-manager application had support for auto-detecting libvirtds
on the local network using mDNS, but this was removed last year
commit fc8f8d5d7e3ba80a0771df19cf20e84a05ed2422
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 6 20:55:31 2018 -0400
connect: Drop avahi support
Libvirtd can advertise itself over avahi. The feature is disabled by
default though and in practice I hear of no one actually using it
and frankly I don't think it's all that useful
The 'Open Connection' wizard has a disproportionate amount of code
devoted to this feature, but I don't think it's useful or worth
maintaining, so let's drop it
I've never heard of any other applications having support for using
mDNS to detect libvirtd instances. Though it is theoretically possible
something exists out there, it is clearly going to be a niche use case
in the virt ecosystem as a whole.
By removing avahi integration we can cut down the dependency chain for
the basic libvirtd install and reduce our code maint burden.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The unprivileged libvirtd daemon switched to use the XDG dir layout in
the 0.9.13 release, and included code for moving config files from the
old location. The chances of someone upgrading libvirt from <= 0.9.12
directly to libvirt >= 5.5.0 is close enough to zero that we can
reasonably drop the back compat code.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In libssh 0.9.0 functions ssh_is_server_known and ssh_write_knownhost
are marked as deprecated.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1722735
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
testDomainInterfaceAddresses always returns the same hard-coded
addresses. Change the behavior such as if there is a DHCP range defined,
addresses are returned from that pool.
The specific address returned depends on both the domain id and the
specific guest interface in an attempt to return unique addresses *most
of the time*.
Additionally, properly handle IPv6 networks which were previously
ignored completely.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When connecting to virtlogd fails e.g. due to wrong libvirtd selinux
process label we'd report an utterly useless error message:
$ virsh start upstream
error: Failed to start domain upstream
error: Cannot recv data: Connection reset by peer
Use virLastErrorPrefixMessage in the correct place to give a better
sense of what's going on:
$ virsh start upstream
error: Failed to start domain upstream
error: can't connect to virtlogd: Cannot recv data: Connection reset by peer
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases we report a low level error message which does not have
enough information to see what the problem is. To allow improving on
this add an API which will prefix the error message with another error
message string which can be used to describe where the error comes from.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit f34397e51c introduced a crash-inducing problem when collecting
disk snapshot data, where the array would be filled starting from the
second element.
The code then dereferenced the first one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The "cpu-add" command is supported in all supported qemu versions and
cpu unplug did not work at all until the new cpu unplug approach (using
device_add/del) was implemented.
Remove the support for falling back to the text monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The docstring of virNetworkGetDHCPLeases is not correctly formatted and
as a result the example code snippet appears as normal text under the
"Returns:" section. This patch fixes the problem.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
With QEMU versions which lack "unavailable-features" we use CPUID based
detection of features which were enabled or disabled once QEMU starts.
Thus using MSR features with host-model would result in all of them
being marked as disabled in the active domain definition even though
QEMU did not actually disable them.
Let's make sure we add MSR features to host-model only when
"unavailable-features" property is supported by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Without "unavailable-features" CPU property we cannot properly detect
whether a specific MSR feature we asked for (either explicitly or
implicitly via a CPU model) was disabled by QEMU for some reason.
Because this could break migration, snapshots, and save/restore
operaions, it's better to just forbid any use of MSR features with QEMU
which lacks "unavailable-features" CPU property.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is used by the host capabilities code to construct host CPU
definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This functions may be used as a virCPUDefFeatureFilter callbacks for
virCPUDefCheckFeatures, virCPUDefFilerFeatures, and similar functions to
select (virCPUx86FeatureFilterSelectMSR) or drop
(virCPUx86FeatureFilterDropMSR) features reported via MSR.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Until now, this was a macro usable for direct initialization when a
variable is defined. Turning the macro into a function makes it more
general.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This API can be used to check whether a CPU definition contains features
matching a given filter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These APIs can be used to execute arbitrary emulators.
Forbid them on read-only connections.
Fixes: CVE-2019-10168
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This API can be used to execute arbitrary emulators.
Forbid it on read-only connections.
Fixes: CVE-2019-10167
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainManagedSaveDefineXML can be used to alter the domain's
config used for managedsave or even execute arbitrary emulator binaries.
Forbid it on read-only connections.
Fixes: CVE-2019-10166
Reported-by: Matthias Gerstner <mgerstner@suse.de>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainSaveImageGetXMLDesc API is taking a path parameter,
which can point to any path on the system. This file will then be
read and parsed by libvirtd running with root privileges.
Forbid it on read-only connections.
Fixes: CVE-2019-10161
Reported-by: Matthias Gerstner <mgerstner@suse.de>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use 'rc' to temporarily store the subfunction return values,
instead of ret.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
In preparation to removing the json field from qemuMonitor,
stop checking for it in QEMU_CHECK_MONITOR.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Always assume JSON monitor was requested, since all the callers
pass true anyway.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Now that we no longer support the HMP monitor, remove some dead code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
No reason not to be consistent with the user-visible value.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using 8 hex digits all the time, regardless of whether the
actual value can fit in fewer, makes it more obvious to the
user what the limits are.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to sPAPR, addresses are 32-bit rather than 64-bit.
Update qemuDomainDeviceDefValidateAddress() accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1598657
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a switch() statement and prepare for validating
more address types than just PCI.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the virDomainQemuAttach API returns an error, we can remove the
unused qemuProcessAttach function as well, deleting the only user
that possibly could have requested to open a non-JSON monitor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The only user is now in qemu_monitor_json.c to re-parse the command line
format into keyvalue pairs for use in QMP command construction.
Move and rename the functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
qemu_domain.c is now the only place that uses it, so we can move it from
qemu_parse_command.h
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's now unused and utterly obsolete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This code is really neglected and does not at all work reliably. It
can't even be used for converting our own commandline back.
Since this was mostly useful for aiding migration from manually run qemu
to libvirt and will not work for this puspose in many cases it's not
worth having.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that we no longer support attaching to a live QEMU process not
managed by libvirt we can drop the backend functions as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Attaching to modern qemu will not work with all this code and attempting
to ressurect it would be mostly pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are couple of functions which get shorter after the
treatment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Couple of things happening in this patch:
1) We can mark the device we're adding onto active list as used
way before - when adding it onto temporary list.
2) When actually moving device from a temporary helper list onto
the list of active devices we check if the device isn't
already there. The same check is performed by
virSCSIVHostDeviceListAdd() later. Drop this duplicity.
3) The 'error' label is renamed to 'rollback' to reflect what it
is actually doing. While in the rest of the code we don't
allow random label names, this source file is different.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When looking up a USB device by vendor the
virUSBDeviceFindByVendor() is used. The function returns number
of items found. But the logic in caller to process it is
needlessly complicated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are couple of functions which get shorter after the
treatment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to translate virDomainHostdevDef-s into
virPCIDevice-s with locked list of PCI devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to translate virDomainHostdevDef-s into
virPCIDevice-s with locked list of PCI devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function is a good candidate for VIR_AUTOPTR() conversion.
But this conversion will be easier if we only add @pci device
onto @pcidevs list after it was all set up.
This is no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If spawning qemu fails then we report an error and proceed to
writing status XML onto the disk. This is unnecessary as we are
sure that the domain is not running.
At the same time, if virPidFileReadPath() fails it returns
-errno. Use it in the error message. It may explain what went
wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting from version 4.1 qemu allows reporting 'features' for a given
QAPI type object. This allows reporting support of fixes and additions
which are otherwise invisible in the QAPI schema.
Implement a possibility to query 'features' in the QAPI query strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When updating guest CPU definition according to the vCPU actually
created by QEMU, we want to use the generic qemuMonitorGetGuestCPU to
get both CPUID and MSR features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unlike the old version (which is now called qemuMonitorGetGuestCPUx86),
this monitor API checks for individual features by their names rather
than processing CPUID bits. Thus we can get the list of enabled and
disabled features for both CPUID and MSR features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function converts a list of QOM properties into a NULL-terminated
array of property names. The new type parameter may be used to limit the
result to properties of a specific type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a generic replacement for the former virCPUx86DataAddFeature,
which worked on the generic virCPUDataPtr anyway.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was never implemented or used for anything else anyway. Mainly
because it uses CPUID features bits. The function is renamed as
qemuMonitorGetGuestCPUx86 to make this explicit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We used type=full expansion on the result of previous type=static
expansion to get all possible spellings of CPU features. Since we can
now translate the QEMU's canonical names to our names, we can drop this
magic and do only type=static CPU model expansion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By default query-cpu-model-expansion only reports canonical names of all
CPU features. We do some magic and call the command twice to get all
possible spellings of the features, but being able to consume canonical
names will allow us to drop this magic.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When building QEMU command line, we should use the preferred spelling of
each CPU feature without relying on compatibility aliases (which may be
removed at some point).
The "unavailable-features" CPU property is used as a witness for the
correct names of the features in our translation table.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way we call query-cpu-model-expansion will rely on some capabilities
bits. Let's make sure all capabilities are set before probing host CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is similar to "filtered-features" property, which reports CPUID bits
corresponding to disabled features, but more general. The
"unavailable-features" property supports both CPUID and MSR features by
listing their names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will use it to check whether QEMU supports a specific CPU property.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far we always used libvirt's name of each CPU feature relying on
backward compatible aliases in QEMU. The new translation table can be
used whenever QEMU mandates or prefers canonical feature names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Normal CPU features use modern -cpu ...,feature=on|off syntax when
available, but kvm features kept using the old +feature or -feature.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Properly filter features which should not be passed to QEMU because they
were never supported by QEMU or they did nothing and QEMU dropped them.
Currently they are just silently ignored by the command line generator.
Let's make this process more visible and clean by dropping the features
from the domain's active definition in qemuProcessUpdateGuestCPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new internal API can be used for in place filtering of CPU features
in virCPUDef.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already have virQEMUCapsCPUFilterFeatures for filtering features
which QEMU does not know about. Let's move osxsave and ospke from
qemuFeatureNoEffect there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unused as of:
commit f136b83139
qemu: Rework setting process affinity
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Only succeed when @pid_value is 1, since according to the docs this is
the minimum requirement for any driver to implement this API.
Since this is test driver, we assume that any signal from the supported
list can be sent to pid 1 and we therefore succeed every time.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The libvirtd.conf file has a comment pointing people to format.html
which has nothing todo with the configuration file format.
It also has a comment about tests/daemon-conf which no longer exists,
and even if it did exist such comment is not relevant to end users
when this file is installed in /etc/.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit a3ab6d42 changed the libvirtd profile to a named profile
but neglected to accommodate the change in the qemu profile
ptrace and signal rules.
Later on 4ec3cf9a fixed that for ptrace and signal but openGraphicsFD
is still missing.
As a result, libvirtd is unable to open UI on libvirt >=5.1 e.g. with
virt-manager.
Add openGraphicsFD rule that references the libvirtd profile
by name in addition to full binary path.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1833040
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Normal practice is to provide a Ref API for all objects, but this was
forgotten for the virNetworkPortPtr object.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use auto free to avoid leaking the "trustGuestRxFilters" strings
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to librados.
Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Change the domain conf so invoke the new network port public APIs instead
of the network callbacks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The portid will be the UUID of the virNetworkPort object associated
with the network interface when a guest is running.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The various steps involved in reconnecting to a domain may cause updates
to the virDomainObj struct that need to be reflected in the saved status
file.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When starting up it is important to notify the network driver of any
NICs which are used by running guests so that it can account for any
resources they are using.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This initial implementation just wires up the APIs and does tracking of
the port XML definitions. It is not yet integrated into the resource
allocation logic.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetworkObjPtr state will need to maintain a record of all
virNetworkPortDefPtr objects associated with the network. Record these
in a hash and add APIs for manipulating them.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Define the wire protocol for the virNetworkPort APIs and enable the
client/server RPC dispatch.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a new virNetworPort object that will present an attachment to
a virtual network from a VM.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port bandwidth update code from the domain driver
network callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port deletion code from the domain driver network
callback implementation.
Reivewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port notification code from the domain driver network
callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port allocation code from the domain driver network
callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current qemu driver code for changing bandwidth on a NIC first asks
the network driver if the change is supported, then changes the
bandwidth on the VIF, and then tells the network driver to update the
bandwidth on the bridge.
This is potentially racing if a parallel API call causes the network
driver to allocate bandwidth on the bridge between the check and the
update phases.
Change the code to just try to apply the network bridge update
immediately and rollback at the end if something failed.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When (un)plugging an interface into a network, the 'plugged'
and 'unplugged' operations are invoked in the hook script.
The data provided to the script contains the network XML, the
domain XML and the domain interface XML. When we strictly split the
drivers up this will no longer be possible and thus breakage is
unavoidable. The hook scripts are not considered to be covered by the
API guarantee so this is OK.
To avoid existing scripts taking the wrong action, the existing
operations are changed to 'port-created' and 'port-deleted'
instead. These will receive the network XML and the network port
XML.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkReleaseActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkNotifyActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkAllocateActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Helper APIs are needed to
- Populate basic virNetworkPortDef from virDomainNetDef
- Set a virDomainActualNetDef from virNetworkPortDef
- Populate a full virNetworkPortDef from virDomainActualNetDef
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Stop passing a virDomainNetDefPtr parameter to networkLogAllocation,
instead just pass in the MAC address. The actual device type is also not
required, since virNetworkForwardIfDefPtr has a type field that can be
used instead.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a virNetworkPortDefPtr struct to represent the data associated
with a virtual network port. Add APIs for parsing/formatting XML docs
with the data.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The domain conf actual network def stores a <class id='3'/> element
separately from the <bandwidth>. The class ID should really just be
an attribute on the <bandwidth> element. We can't change existing
XML, and this isn't visible to users since it is internal XML only.
When we expose the new network port XML to users though, we should
get the design right.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When libvirtd is run inside a container it is normal that neither
systemd nor pm-utils will be available. In this case there is no way to
suspend the host, so libvirt should just report the feature unsupported
instead of raising an error.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If libvirt receives DISCONNECTED event and prDaemonRunning is set
to false, and qemuDomainRemoveDiskDevice() is performing in the
meantime, then qemuDomainRemoveDiskDevice() will fail to remove
pr-helper object because prDaemonRunning is false. But removing
that check from qemuHotplugRemoveManagedPR() is not enough,
because after removing the object through monitor the
qemuProcessKillManagedPRDaemon() is called which contains the
same check. Thus the pr-helper process might be left behind.
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Log the flags passed to the function in a exploded state so that it's
easily visible what's happening to the image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the behaviour of launch security is heavily dependent on 3rd party
vendors (e.g. AMD SEV) where the data returned can be essentially
anything, the most reasonable approach here in the test driver is not to
try return any data.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The hash table returned by qemuMonitorGetAllBlockJobInfo is organized by
the frontend name (which skipps the 'drive-' prefix). While our code
properly matches the jobs to the disk, qemu needs the full job name
including the 'drive-' prefix to be able to identify jobs.
Fix this by adding an argument to qemuMonitorGetAllBlockJobInfo which
does not modify the job name before filling the hash.
This fixes a regression where users would not be able to cancel/pivot
block jobs after restarting libvirtd while a blockjob is running.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 76b9aba2ba I refactored how the function treats the readonly
flag which introduced a bug when we'd not allow to force read-write
state for an image.
This created problems with blockjobs where we need to temporarily
force images to have read-write permissions.
Rename QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_READ_ONLY to
QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_FORCE_READ_ONLY and also introduce
a complement QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_FORCE_READ_WRITE which
will allow to force write access.
https://bugzilla.redhat.com/show_bug.cgi?id=1717768
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 76b9aba2ba I tried to refactor qemuDomainStorageSourceAccessAllow
but used wrong operators for adding bitwise flags.
This way the flags would result in 0 if any of them would be applied.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Updates the existing image stored in @path, in case @dxml contains valid
XML supported by the fake host.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extracting the code logic for opening and parsing a test image from
testDomainRestoreFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageGetXMLDesc.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extracting the code logic for writing a test image to disk from
testDomainSaveFlags into a separate function, allows us to reuse this
code in other functions such as testDomainSaveImageDefineXML.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The upcoming virDomainBackup() API needs to take advantage of the
ability to expose a bitmap as part of nbd-server-add for a pull-mode
backup (this is the recently-added QEMU_CAPS_NBD_BITMAP capability).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The upcoming virDomainBackup() API needs to take advantage of various
qcow2 bitmap manipulations as the basis to virDomainCheckpoints and
incremental backups. Add four functions to expose
block-dirty-bitmap-{add,enable,disable,merge} (this is the
recently-added QEMU_CAPS_BITMAP_MERGE capability).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Add two capabilities for testing features required for the upcoming
virDomainBackupBegin: use block-dirty-bitmap-merge as the generic
witness of bitmap support needed for checkpoints (since all of the
bitmap management functionalities were finalized in the same qemu 4.0
release), and the bitmap parameter to nbd-server-add for pull-mode
backup support. Even though both capabilities are likely to be
present or absent together (that is, it is unlikely to encounter a
qemu that backports only one of the two), it still makes sense to keep
two capabilities as the two uses are orthogonal (full backups don't
require checkpoints, push mode backups don't require NBD bitmap
support, and checkpoints can be used for more than just incremental
backups).
Existing code is not affected by the new capabilities.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Migration always uses a TCP socket for NBD servers, because we don't
support same-host migration. But upcoming pull-mode incremental backup
needs to also support a Unix socket, for retrieving the backup from
the same host. Support this by plumbing virStorageNetHostDef through
the monitor calls, since that is a nice reusable struct that can track
both TCP and Unix sockets.
Update qemumonitorjsontest to verify both forms of the QMP command.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Now that we never get to the actual snapshot code if there's nothing to
do we can remove the variable and surrounding logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Skip actual snapshot creation code if we have 0 disks to snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All cases taking the 'cleanup' path can take the original 'error' path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce 'rc' for collecting state from monitor commands so that we can
initialize 'ret' to -1. This also fixes few cases which could return 0
from the function despite an error condition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainSnapshotDiskDataFree also removes the resources associated
with the disk data. Move the unlinking of the just-created file so that
we can unify the cleanup paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit cbb4d229de I named the function with 'free' suffix, but at
that time it already did some non-freeing tasks. Rename it to make it
obvious that it's not just memory managemet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function skips disks which are not selected for snapshot. Rather
than creating a sparse array and check whether the given field is filled
compress the entries.
Note that this does not allocate a smaller array, but the memory
allocation is short-lived.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If there's an offline config definition save it unconditionally even if
it was not modified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The error path is unlikely thus saving the status XML even if we didn't
modify it does not add much burden.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After getting rid of pre-transaction qemu support the cleanup section is
unused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Validate @keycodes before successfully returning. Since this is test
driver, @holdtime is being unused here.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 2f2254c7f4 attempted to fix a memory leak by ensuring
cpumapToSet is always a freshly allocated bitmap, but regrettably
introduced a NULL pointer access while doing so, because it called
virBitmapCopy() without allocating the destination bitmap first.
Solve the issue by using virBitmapNewCopy() instead.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Due to this bug the following command would fail on any host where TSC
frequency can be probed:
$ virsh capabilities | virsh cpu-baseline /dev/stdin
error: unsupported configuration: Invalid TSC frequency
https://bugzilla.redhat.com/show_bug.cgi?id=1641702
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a premature optimization. It's perfectly acceptable for
'error' label to deal with @vm == NULL case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We're using VIR_AUTOPTR() for everything now, plus the
cleanup section was not doing anything useful anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In two out of three scenarios we are cleaning up properly after
ourselves, but commit 5f2212c062 has changed the remaining one
in a way that caused it to start leaking cpumapToSet.
Refactor the logic so that cpumapToSet is always a freshly
allocated bitmap that gets cleaned up automatically thanks to
VIR_AUTOPTR(); this also allows us to remove the hostcpumap
variable.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now, if numad fails, we raise an error but return an
empty string to the caller instead of a NULL pointer, which
means processing will continue and the user will see
# virsh start guest
error: Failed to start domain guest
error: invalid argument: Failed to parse bitmap ''
instead of a more reasonable
# virsh start guest
error: Failed to start domain guest
error: operation failed: Failed to query numad for the advisory nodeset
Make sure the user gets a better error message.
https://bugzilla.redhat.com/show_bug.cgi?id=1716387
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ever since the feature was introduced with commit 0f8e7ae33a,
it has contained a logic error in that it attempted to use a NUMA
node map where a CPU map was expected.
Because of that, guests using <numatune> might fail to start:
# virsh start guest
error: Failed to start domain guest
error: cannot set CPU affinity on process 40055: Invalid argument
This was particularly easy to trigger on POWER 8 machines, where
secondary threads always show up as offline in the host: having
<numatune>
<memory mode='strict' placement='static' nodeset='1'/>
</numatune>
in the guest configuration, for example, would result in libvirt
trying to set the process affinity so that it would prefer
running on CPU 1, but since that's a secondary thread and thus
shows up as offline, the operation would fail, and so would
starting the guest.
Use the newly introduced virNumaNodesetToCPUset() to convert the
NUMA node map to a CPU map, which in the example above would be
48,56,64,72,80,88 - a valid input for virProcessSetAffinity().
https://bugzilla.redhat.com/show_bug.cgi?id=1703661
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper converts a set of NUMA node to the set of CPUs
they contain.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This argument wasn't validated anywhere, neither in the generic
implementation nor in the individual drivers. As a result a call to this
function with a large enough codeset value prior to this change causes
libvirtd to crash.
This happens because all drivers call virKeycodeValueTranslate which
uses codeset as an index to the virKeymapValues array, causing an
out-of-bounds error.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When migrating a domain with invtsc CPU feature enabled, the TSC
frequency of the destination host must match the frequency used when the
domain was started on the source host or the destination host has to
support TSC scaling.
If the frequencies do not match and the destination host does not
support TSC scaling, QEMU will fail to set the right TSC frequency when
starting vCPUs on the destination and thus migration will fail. However,
this is quite late since both host might have spent significant time
transferring memory and perhaps even storage data.
By adding the check to libvirt we can let migration fail before any data
starts to be sent over. If for some reason libvirt is unable to detect
the host's TSC frequency or scaling support, we'll just let QEMU try and
the migration will either succeed or fail later.
Luckily, we mandate TSC frequency to be explicitly set in the domain XML
to even allow migration of domains with invtsc. We can just check
whether the requested frequency is compatible with the current host
before starting QEMU.
https://bugzilla.redhat.com/show_bug.cgi?id=1641702
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When the host CPU supports invariant TSC the host CPU definition created
by virCPUx86GetHost will contain (unless probing fails for some reason)
addition TSC related data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 0a97486e09 moved them outside #ifdef, but after virCPUx86GetHost,
which will start calling them in the following patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch adds a new
<counter name='tsc' frequency='N' scaling='on|off'/>
element into the host CPU capabilities XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
On a KVM x86_64 host which supports invariant TSC this function can be
used to detect the TSC frequency and the availability of TSC scaling.
The magic MSR numbers required to check if VMX scaling is supported on
the host are documented in Volume 3 of the Intel® 64 and IA-32
Architectures Software Developer’s Manual.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function is renamed as virQEMUCapsProbeHostCPU and it does not get
the list of allowed CPU models from qemuCaps anymore. This is
responsibility is moved to the caller. The result is just a very thin
wrapper around virCPUGetHost mostly required mocking in tests.
The generic function is used in place of a direct call to virCPUGetHost
in virQEMUCapsInitHostCPUModel to make sure tests don't accidentally
probe host CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1426162
Turns out, some aarch64 systems have SMBIOS info. That means we
can use dmidecode to fetch some information. If that fails, fall
back to the old behaviour.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There's nothing x86 specific about this function. Rename the
function so that it has DMI suffix which enables it to be reused
on different arches (as using X86 from say ARM would look
suspicious).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
