Fix incorrect jump labels in error paths as the stop jump is only
needed if the driver has already changed the state. For example
'virAtomicIntInc(&driver->nactive)' will be 'reverted' in the
qemuProcessStop call.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When a domain needs an access to some device (be it a disk, RNG,
chardev, whatever), we have to allow it in the devices CGroup (if
it is available), because by default we disallow all the devices.
But some of the functions that are responsible for setting up
devices CGroup are lacking check whether there is any CGroup
available. Thus users might be unable to hotplug some devices:
virsh # attach-device fedora rng.xml
error: Failed to attach device from rng.xml
error: internal error: Controller 'devices' is not mounted
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
One of the conditions in qemuDomainDeviceCalculatePCIConnectFlags
was missing a break that could result it in falling through to
an incorrect codepath.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemuDomainAssignPCIAddresses() hardcoded the assumption
that the only way to support devices on a non-zero bus is
to add one or more pci-bridges; however, since we now
support a large selection of PCI controllers that can be
used instead, the assumption is no longer true.
Moreover, this check was always redundant, because the
only sensible time to check for the availability of
pci-bridge is when building the QEMU command line, and
such a check is of course already in place.
In fact, there were *two* such checks, but since one of
the two was relying on the incorrect assumption explained
above, and it was redundant anyway, it has been dropped.
When switching over the values in the virDomainControllerModelPCI
enumeration, make sure the proper cast is in place so that the
compiler can warn us when the coverage is not exaustive.
For the same reason, fold some unstructured checks (performed by
comparing directly against some values in the enumeration) inside
an existing switch statement.
The CPU model info formating code in virQEMUCapsFormatCache will get
more complicated soon. Separating the code in
virQEMUCapsFormatHostCPUModelInfo will make the result easier to read.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
All features the function is currently supposed to filter out are
specific to x86_64. We should avoid removing them on other
architectures. It seems to be quite unlikely other achitectures would
use the same names, but one can never be sure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The functions in virCommand() after fork() must be careful with regard
to accessing any mutexes that may have been locked by other threads in
the parent process. It is possible that another thread in the parent
process holds the lock for the virQEMUDriver while fork() is called.
This leads to a deadlock in the child process when
'virQEMUDriverGetConfig(driver)' is called and therefore the handshake
never completes between the child and the parent process. Ultimately
the virDomainObjectPtr will never be unlocked.
It gets much worse if the other thread of the parent process, that
holds the lock for the virQEMUDriver, tries to lock the already locked
virDomainObject. This leads to a completely unresponsive libvirtd.
It's possible to reproduce this case with calling 'virsh start XXX'
and 'virsh managedsave XXX' in a tight loop for multiple domains.
This commit fixes the deadlock in the same way as it is described in
commit 61b52d2e38.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
With that users could access files outside /dev/shm. That itself
isn't a security problem, but might cause some errors we want to
avoid. So let's forbid slashes as we do with domain and volume names
and also mention that in the schema.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1395496
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This follows the same check for disk, because we cannot remove iothread
if it's used by disk or by controller. It could lead to crashing QEMU.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If virDomainDelIOThread API was called with VIR_DOMAIN_AFFECT_LIVE
and VIR_DOMAIN_AFFECT_CONFIG and both XML were already a different
it could result in removing iothread from config XML even if there
was a disk using that iothread.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The situation covered by the removed code will not ever happen.
This code is called only while starting a new QEMU process where
the capabilities where already checked and while attaching to
existing QEMU process where we don't even detect the iothreads.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When enabling virgl, qemu opens /dev/dri/render*. So far, we are
not allowing that in devices CGroup nor creating the file in
domain's namespace and thus requiring users to set the paths in
qemu.conf. This, however, is suboptimal as it allows access to
ALL qemu processes even those which don't have virgl configured.
Now that we have a way to specify render node that qemu will use
we can be more cautious and enable just that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, qemuDomainGetHostdevPath has no knowledge of the reasong
it is called and thus reports /dev/vfio/vfio for every VFIO
backed device. This is suboptimal, as we want it to:
a) report /dev/vfio/vfio on every addition or domain startup
b) report /dev/vfio/vfio only on last VFIO device being unplugged
If a domain is being stopped then namespace and CGroup die with
it so no need to worry about that. I mean, even when a domain
that's exiting has more than one VFIO devices assigned to it,
this function does not clean /dev/vfio/vfio in CGroup nor in the
namespace. But that doesn't matter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
So far, we are allowing /dev/vfio/vfio in the devices cgroup
unconditionally (and creating it in the namespace too). Even if
domain has no hostdev assignment configured. This is potential
security hole. Therefore, when starting the domain (or
hotplugging a hostdev) create & allow /dev/vfio/vfio too (if
needed).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Since these two functions are nearly identical (with
qemuSetupHostdevCgroup actually calling virCgroupAllowDevicePath)
we can have one function call the other and thus de-duplicate
some code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
There's no need for this function. Currently it is passed as a
callback to virSCSIVHostDeviceFileIterate(). However, SCSI host
devices have just one file path. Therefore we can mimic approach
used in qemuDomainGetHostdevPath() to get path and call
virCgroupAllowDevicePath() directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
There's no need for this function. Currently it is passed as a
callback to virSCSIDeviceFileIterate(). However, SCSI devices
have just one file path. Therefore we can mimic approach used in
qemuDomainGetHostdevPath() to get path and call
virCgroupAllowDevicePath() directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
There's no need for this function. Currently it is passed as a
callback to virUSBDeviceFileIterate(). However, USB devices have
just one file path. Therefore we can mimic approach used in
qemuDomainGetHostdevPath() to get path and call
virCgroupAllowDevicePath() directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add a new attribute 'rendernode' to <gl> spice element.
Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function is returning a boolean therefore check for '< 0'
makes no sense. It should have been
'!qemuDomainNamespaceAvailable'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The bare fact that mnt namespace is available is not enough for
us to allow/enable qemu namespaces feature. There are other
requirements: we must copy all the ACL & SELinux labels otherwise
we might grant access that is administratively forbidden or vice
versa.
At the same time, the check for namespace prerequisites is moved
from domain startup time to qemu.conf parser as it doesn't make
much sense to allow users to start misconfigured libvirt just to
find out they can't start a single domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 2a8d40f4ec refactored qemuMonitorJSONGetCPUx86Data and replaced
virJSONValueObjectGet(reply, "return") with virJSONValueObjectGetArray.
While the former is guaranteed to always return non-NULL pointer the
latter may return NULL if the returned JSON object is not an array.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
mknod() is affected my the current umask, so we're not
guaranteed the newly-created device node will have the
right permissions.
Call chmod(), which is not affected by the current umask,
immediately afterwards to solve the issue.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1421036
Due to a logic error, the autofilling of USB port when a bus is
specified:
<address type='usb' bus='0'/>
does not work for non-hub devices on domain startup.
Fix the logic in qemuDomainAssignUSBPortsIterator to also
assign ports for USB addresses that do not yet have one.
https://bugzilla.redhat.com/show_bug.cgi?id=1374128
==11846== 240 bytes in 1 blocks are definitely lost in loss record 81 of 107
==11846== at 0x4C2BC75: calloc (vg_replace_malloc.c:624)
==11846== by 0x18C74242: virAllocN (viralloc.c:191)
==11846== by 0x4A05E8: qemuMonitorCPUModelInfoCopy (qemu_monitor.c:3677)
==11846== by 0x446E3C: virQEMUCapsNewCopy (qemu_capabilities.c:2171)
==11846== by 0x437335: testQemuCapsCopy (qemucapabilitiestest.c:108)
==11846== by 0x437CD2: virTestRun (testutils.c:180)
==11846== by 0x437AD8: mymain (qemucapabilitiestest.c:176)
==11846== by 0x4397B6: virTestMain (testutils.c:992)
==11846== by 0x437B44: main (qemucapabilitiestest.c:188)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Check if virQEMUCapsNewCopy(...) has failed, thus a segmentation fault
in virQEMUCapsFilterByMachineType(...) will be avoided.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Using libvirt to do live migration over RDMA via IPv6 address failed.
For example:
rhel73_host1_guest1 qemu+ssh://[deba::2222]/system --verbose
root@deba::2222's password:
error: internal error: unable to execute QEMU command 'migrate': RDMA
ERROR: could not rdma_getaddrinfo address deba
As we can see, the IPv6 address used by rdma_getaddrinfo() has only
"deba" part because we didn't properly enclose the IPv6 address in []
and passed rdma:deba::2222:49152 as the migration URI in
qemuMonitorMigrateToHost.
Signed-off-by: David Dai <zdai@linux.vnet.ibm.com>
This patch add support for file memory backing on numa topology.
The specified access mode in memoryBacking can be overriden
by specifying token memAccess in numa cell.
Add new parameter memory_backing_dir where files will be stored when memoryBacking
source is selected as file.
Value is stored inside char* memoryBackingDir
Rename to avoid duplicate code. Because virDomainMemoryAccess will be
used in memorybacking for setting default behaviour.
NOTE: The enum cannot be moved to qemu/domain_conf because of headers
dependency
Just like we need wrappers over other virSecurityManager APIs, we
need one for virSecurityManagerSetImageLabel and
virSecurityManagerRestoreImageLabel. Otherwise we might end up
relabelling device in wrong namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Firstly, instead of checking for next->path the
virStorageSourceIsEmpty() function should be used which also
takes disk type into account.
Secondly, not every disk source passed has the correct type set
(due to our laziness). Therefore, instead of checking for
virStorageSourceIsBlockLocal() and also S_ISBLK() the former can
be refined to just virStorageSourceIsLocalStorage().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Again, one missed bit. This time without this commit there is no
/dev entry in the namespace of the qemu process when doing disk
snapshots or block-copy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These functions do not need to see the whole virDomainDiskDef.
Moreover, they are going to be called from places where we don't
have access to the full disk definition. Sticking with
virStorageSource is more than enough.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is no need for this. None of the namespace helpers uses it.
Historically it was used when calling secdriver APIs, but we
don't to that anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Again, one missed bit. This time without this commit there is no
/dev entry in the namespace of the qemu process when attaching
vhost SCSI device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since we have qemuSecurity wrappers over
virSecurityManagerSetHostdevLabel and
virSecurityManagerRestoreHostdevLabel we ought to use them
instead of calling secdriver APIs directly. Without those
wrappers the labelling won't be done in the correct namespace
and thus won't apply to the nodes seen by qemu itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
libvirt was able to set the host_mtu option when an MTU was explicitly
given in the interface config (with <mtu size='n'/>), set the MTU of a
libvirt network in the network config (with the same named
subelement), and would automatically set the MTU of any tap device to
the MTU of the network.
This patch ties that all together (for networks based on tap devices
and either Linux host bridges or OVS bridges) by learning the MTU of
the network (i.e. the bridge) during qemuInterfaceBridgeConnect(), and
returning that value so that it can then be passed to
qemuBuildNicDevStr(); qemuBuildNicDevStr() then sets host_mtu in the
interface's commandline options.
The result is that a higher MTU for all guests connecting to a
particular network will be plumbed top to bottom by simply changing
the MTU of the network (in libvirt's config for libvirt-managed
networks, or directly on the bridge device for simple host bridges or
OVS bridges managed outside of libvirt).
One question I have about this - it occurred to me that in the case of
migrating a guest from a host with an older libvirt to one with a
newer libvirt, the guest may have *not* had the host_mtu option on the
older machine, but *will* have it on the newer machine. I'm curious if
this could lead to incompatibilities between source and destination (I
guess it all depends on whether or not the setting of host_mtu has a
practical effect on a guest that is already running - Maxime?)
Likewise, we could run into problems when migrating from a newer
libvirt to older libvirt - The guest would have been told of the
higher MTU on the newer libvirt, then migrated to a host that didn't
understand <mtu size='blah'/>. (If this really is a problem, it would
be a problem with or without the current patch).
virNetDevTapCreateInBridgePort() has always set the new tap device to
the current MTU of the bridge it's being attached to. There is one
case where we will want to set the new tap device to a different
(usually larger) MTU - if that's done with the very first device added
to the bridge, the bridge's MTU will be set to the device's MTU. This
patch allows for that possibility by adding "int mtu" to the arg list
for virNetDevTapCreateInBridgePort(), but all callers are sending -1,
so it doesn't yet have any effect.
Since the requested MTU isn't necessarily what is used in the end (for
example, if there is no MTU requested, the tap device will be set to
the current MTU of the bridge), and the hypervisor may want to know
the actual MTU used, we also return the actual MTU to the caller (if
actualMTU is non-NULL).
In order for memory locking to work, the hard limit on memory
locking (and usage) has to be set appropriately by the user.
The documentation mentions the requirement already: with this
patch, it's going to be enforced by runtime checks as well,
by forbidding a non-compliant guest from being defined as well
as edited and started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1316774
Similarly to one of the previous commits, we need to deal
properly with symlinks in hotplug case too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Imagine you have a disk with the following source set up:
/dev/disk/by-uuid/$uuid (symlink to) -> /dev/sda
After cbc45525cb the transitive end of the symlink chain is
created (/dev/sda), but we need to create any item in chain too.
Others might rely on that.
In this case, /dev/disk/by-uuid/$uuid comes from domain XML thus
it is this path that secdriver tries to relabel. Not the resolved
one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After previous commit this has become redundant step.
Also setting up devices in namespace and setting their label
later on are two different steps and should be not done at once.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to move all the seclabel setting to security driver.
Having the relabel code spread all over the place looks very
messy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Because of the nature of security driver transactions, it is
impossible to use them properly. The thing is, transactions enter
the domain namespace and commit all the seclabel changes.
However, in RestoreAllLabel() this is impossible - the qemu
process, the only process running in the namespace, is gone. And
thus is the namespace. Therefore we shouldn't use the transactions
as there is no namespace to enter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The current ordering is as follows:
1) set label
2) create the device in namespace
3) allow device in the cgroup
While this might work for now, it will definitely not work if the
security driver would use transactions as in that case there
would be no device to relabel in the domain namespace as the
device is created in the second step.
Swap steps 1) and 2) to allow security driver to use more
transactions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a function for properly assigning the blockdeviotune
info, let's use it instead of dropping the group name on every
assignment. Otherwise it will not work with both --live and --config
options.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 815d98a started auto-adding one hub if there are more USB devices
than available USB ports.
This was a strange choice, since there might be even more devices.
Before USB address allocation was implemented in libvirt, QEMU
automatically added a new USB hub if the old one was full.
Adjust the logic to try adding as many hubs as will be needed
to plug in all the specified devices.
https://bugzilla.redhat.com/show_bug.cgi?id=1410188
==12618== 110 bytes in 10 blocks are definitely lost in loss record 269 of 295
==12618== at 0x4C2AE5F: malloc (vg_replace_malloc.c:297)
==12618== by 0x1CFC6DD7: vasprintf (vasprintf.c:73)
==12618== by 0x1912B2FC: virVasprintfInternal (virstring.c:551)
==12618== by 0x1912B411: virAsprintfInternal (virstring.c:572)
==12618== by 0x50B1FF: qemuAliasChardevFromDevAlias (qemu_alias.c:638)
==12618== by 0x518CCE: qemuBuildChrChardevStr (qemu_command.c:4973)
==12618== by 0x522DA0: qemuBuildShmemBackendChrStr (qemu_command.c:8674)
==12618== by 0x523209: qemuBuildShmemCommandLine (qemu_command.c:8789)
==12618== by 0x526135: qemuBuildCommandLine (qemu_command.c:9843)
==12618== by 0x48B4BA: qemuProcessCreatePretendCmd (qemu_process.c:5897)
==12618== by 0x4378C9: testCompareXMLToArgv (qemuxml2argvtest.c:498)
==12618== by 0x44D5A6: virTestRun (testutils.c:180)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For example when both total_bytes_sec and total_bytes_sec_max are set,
but the former gets cleaned due to new call setting, let's say,
read_bytes_sec, we end up with this weird message for the command:
$ virsh blkdeviotune fedora vda --read-bytes-sec 3000
error: Unable to change block I/O throttle
error: unsupported configuration: value 'total_bytes_sec_max' cannot be set if 'total_bytes_sec' is not set
So let's make it more descriptive. This is how it looks after the change:
$ virsh blkdeviotune fedora vda --read-bytes-sec 3000
error: Unable to change block I/O throttle
error: unsupported configuration: cannot reset 'total_bytes_sec' when 'total_bytes_sec_max' is set
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1344897
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We were setting it based on whether it was supported and that lead to
setting it to NULL, which our JSON code caught. However it ended up
producing the following results:
$ virsh blkdeviotune fedora vda --total-bytes-sec-max 2000
error: Unable to change block I/O throttle
error: internal error: argument key 'group' must not have null value
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Not only we should set the MTU on the host end of the device but
also let qemu know what MTU did we set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We lacked of timestamp in tainting of guests log,
which bring troubles for finding guest issues:
such as whether a guest powerdown caused by qemu-monitor-command
or others issues inside guests.
If we had timestamp in tainting of guests log,
it would be helpful when checking guest's /var/log/messages.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Based on work of Mehdi Abaakouk <sileht@sileht.net>.
When parsing vhost-user interface XML and no ifname is found we
can try to fill it in in post parse callback. The way this works
is we try to make up interface name from given socket path and
then ask openvswitch whether it knows the interface.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The event needs to be emitted after the last monitor call, so that it's
not possible to find the device in the XML accidentally while the vm
object is unlocked.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414393
Previously when QEMU failed "drive_add" due to an error opening
a file it would report
"could not open disk image"
These days though, QEMU reports
"Could not open '/tmp/virtd-test_e3hnhh5/disk1.qcow2': Permission denied"
which we were not detecting as an error condition.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extract the call to qemuDomainSelectHotplugVcpuEntities outside of
qemuDomainSetVcpusLive and decide whether to hotplug or unplug the
entities specified by the cpumap using a boolean flag.
This will allow to use qemuDomainSetVcpusLive in cases where we prepare
the list of vcpus to enable or disable by other means.
In cases where CPU hotplug is supported by qemu force the monitor to
reject invalid or broken responses to 'query-cpus'. It's expected that
the command returns usable data in such case.
https://bugzilla.redhat.com/show_bug.cgi?id=1413922
While all the code that deals with qemu namespaces correctly
detects whether we are running as root (and turn into NO-OP for
qemu:///session) the actual unshare() call is not guarded with
such check. Therefore any attempt to start a domain under
qemu:///session shall fail as unshare() is reserved for root.
The fix consists of moving unshare() call (for which we have a
wrapper called virProcessSetupPrivateMountNS) into
qemuDomainBuildNamespace() where the proper check is performed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
When running on s390 with a kernel that does not support cpu model checking and
with a Qemu new enough to support query-cpu-model-expansion, the gathering of qemu
capabilities will fail. Qemu responds to the query-cpu-model-expansion qmp
command with an error because the needed kernel ioct does not exist. When this
happens a guest cannot even be defined due to missing qemu capabilities data.
This patch fixes the problem by silently ignoring generic errors stemming from
calls to query-cpu-model-expansion.
Reported-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
When creating new /dev/* for qemu, we do chown() and copy ACLs to
create the exact copy from the original /dev. I though that
copying SELinux labels is not necessary as SELinux will chose the
sane defaults. Surprisingly, it does not leaving namespace with
the following labels:
crw-rw-rw-. root root system_u:object_r:tmpfs_t:s0 random
crw-------. root root system_u:object_r:tmpfs_t:s0 rtc0
drwxrwxrwt. root root system_u:object_r:tmpfs_t:s0 shm
crw-rw-rw-. root root system_u:object_r:tmpfs_t:s0 urandom
As a result, domain is unable to start:
error: internal error: process exited while connecting to monitor: Error in GnuTLS initialization: Failed to acquire random data.
qemu-kvm: cannot initialize crypto: Unable to initialize GNUTLS library: Failed to acquire random data.
The solution is to copy the SELinux labels as well.
Reported-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The query-cpu-model-expansion is currently implemented for s390(x) only
and all CPU properties it returns are booleans. However, x86
implementation will report more types of properties. Without making the
code more tolerant older libvirt would fail to probe newer QEMU
versions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The qemuMonitorJSONParseCPUModelProperty function is a callback for
virJSONValueObjectForeachKeyValue and is called for each key/value pair,
thus it doesn't really make sense to check whether key is NULL.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
So far the decision whether /dev/* entry is created in the qemu
namespace is really simple: does the path starts with "/dev/"?
This can be easily fooled by providing path like the following
(for any considered device like disk, rng, chardev, ..):
/dev/../var/lib/libvirt/images/disk.qcow2
Therefore, before making the decision the path should be
canonicalized.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far the namespaces were turned on by default unconditionally.
For all non-Linux platforms we provided stub functions that just
ignored whatever namespaces setting there was in qemu.conf and
returned 0 to indicate success. Moreover, we didn't really check
if namespaces are available on the host kernel.
This is suboptimal as we might have ignored user setting.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a simple wrapper over mount(). However, not every system
out there is capable of moving a mount point. Therefore, instead
of having to deal with this fact in all the places of our code we
can have a simple wrapper and deal with this fact at just one
place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Due to a copy-paste error, the debug message reads:
Setting up disks
It should have been:
Setting up inputs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Surprisingly there was a virDomainPCIAddressReleaseAddr() function
already, but it was completely unused. Since we don't reserve entire
slots at once any more, there is no need to release entire slots
either, so we just replace the single call to
virDomainPCIAddressReleaseSlot() with a call to
virDomainPCIAddressReleaseAddr() and remove the now unused function.
The keen observer may be concerned that ...Addr() doesn't call
virDomainPCIAddressValidate(), as ...Slot() did. But really the
validation was pointless anyway - if the device hadn't been suitable
to be connected at that address, it would have failed validation
before every being reserved in the first place, so by definition it
will pass validation when it is being unplugged. (And anyway, even if
something "bad" happened and we managed to have a device incorrectly
at the given address, we would still want to be able to free it up for
use by a device that *did* validate properly).
This function is only called in two places, and the function itself is
just adding a single argument and calling
virDomainPCIAddressReserveNextAddr(), so we can remove it and instead
call virDomainPCIAddressReserveNextAddr() directly. (The main
motivation for doing this is to free up the name so that
qemuDomainPCIAddressReserveNextSlot() can be renamed in the next
patch, as its current name is now inaccurate and misleading).
All occurences of the former use fromConfig=true, and that's exactly
how virDomainPCIAddressReserveSlot() calls
virDomainPCIaddressReserveAddr(), so just use *Slot() so that *Addr()
can be made static to conf/domain_addr.c (both functions will be
renamed in upcoming patches).
fromConfig should be true if the caller wants
virDomainPCIAddressValidate() to loosen restrictions on its
interpretation of the pciConnectFlags. In particular, either
PCI_DEVICE or PCIE_DEVICE will be counted as equivalent to both, and
HOTPLUG will be ignored. In a few cases where libvirt was manually
overriding automatic address assignment, it was setting fromConfig to
false when validating the hardcoded manual override. This patch
changes those to fromConfig=true as a preemptive strike against any
future bugs that might otherwise surface.
