This is just a wrapper over new functions that have been just
introduced: virStreamRecvFlags(), virStreamRecvHole(). It's very
similar to virStreamRecvAll() except it handles sparse streams
well.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new flag to virStreamRecvFlags in order to handle being able to
stop reading from the stream so that the consumer can generate a "hole"
in stream target. Generation of a hole replaces the need to receive and
handle a sequence of zero bytes for sparse stream targets.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function is basically a counterpart for virStreamSendHole().
If one side of a stream called virStreamSendHole() the other
should call virStreamRecvHole() to get the size of the hole.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API is used to tell the other side of the stream to skip
some bytes in the stream. This can be used to create a sparse
file on the receiving side of a stream.
It takes @length argument, which says how big the hole is. This
skipping is done from the current point of stream. Since our
streams are not rewindable like regular files, we don't need
@whence argument like seek(2) has.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch is adding the virStreamRecvFlags as a variant to the
virStreamRecv function in order to allow for future expansion of
functionality for processing sparse streams using a @flags
argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The parameter is reported by virDomainGetJobStats API and
VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event and it can be used to identify
the operation (migration, snapshot, ...) to which the reported
statistics belong.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
Similarly to domainSetGuestVcpus this commit adds API which allows to
modify state of individual vcpus rather than just setting the count.
This allows to enable CPUs in specific guest NUMA nodes to achieve any
necessary configuration.
After 7f1bdec5fa our nodedev driver is capable of
determining DRM devices (DRM stands for Direct Render Manager not
Digital rights management). There is still one bit missing
though: virConnectListAllNodeDevices() is capable of listing
either all devices or just those with specified capability. Well,
DRM capability is missing there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1332019
This function will essentially be a wrapper to virStorageVolInfo in order
to provide a mechanism to have the "physical" size of the volume returned
instead of the "allocation" size. This will provide similar capabilities to
the virDomainBlockInfo which can return both allocation and physical of a
domain storage volume.
NB: Since we're reusing the _virStorageVolInfo and not creating a new
_virStorageVolInfoFlags structure, we'll need to generate the rpc APIs
remoteStorageVolGetInfoFlags and remoteDispatchStorageVolGetInfoFlags
(although both were originally created from gendispatch.pl and then
just copied into daemon/remote.c and src/remote/remote_driver.c).
The new API will allow the usage of a VIR_STORAGE_VOL_GET_PHYSICAL flag
and will make the decision to return the physical or allocation value
into the allocation field.
In order to get that physical value, virStorageBackendUpdateVolTargetInfoFD
adds logic to fill in physical value matching logic in qemuStorageLimitsRefresh
used by virDomainBlockInfo when the domain is inactive.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Enable libvirt users to modify daemon's logging output settings from outside.
If either an empty string or NULL is passed, a default logging output will be
used the same way as it would be in case writing an empty string to the
libvirtd.conf
Signed-off-by: Erik Skultety <eskultet@redhat.com>
With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Add support for a duration/length for the bps/iops and friends.
Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options
total_bytes_sec_max_length
write_bytes_sec_max_length
read_bytes_sec_max_length
total_iops_sec_max_length
write_iops_sec_max_length
read_iops_sec_max_length
Add new options to allow proving a duration/length in seconds to allow the
bps/iops (and friends) to occur:
total_bytes_sec_max_length
write_bytes_sec_max_length
read_bytes_sec_max_length
total_iops_sec_max_length
write_iops_sec_max_length
read_iops_sec_max_length
Add continue for compiler hint to return to for control
The upstream qemu commit 'dce13204' changed the wording just slightly
to add 'in bursts' essentially. Just following that model here.
Signed-off-by: John Ferlan <jferlan@redhat.com>
For compatibility reasons virDomainSetVcpus needs to add vcpus as non
hotpluggable which means that the users will not be able to unplug it
after the VM has started. Add a flag that will allow to tell the API
that the unpluggable vcpus are okay.
The recent update to gnulib
commit 9d7a37ecb2
Author: Eric Blake <eblake@redhat.com>
Date: Thu Sep 15 15:12:52 2016 -0500
build: update to latest gnulib
Pulled in a change that adds -fno-common to the default compiler
flags
commit bf8e658ffadb95d444f56d222d04c9af955af765
Author: Jim Meyering <meyering@fb.com>
Date: Fri Sep 2 09:16:16 2016 -0700
manywarnings: add -fno-common
This caused libvirt Mingw build to break with the compiler
reporting 100's of definitions of virConnectAuthPtrDefault
./.libs/libvirt_util.a(libvirt_util_la-virarch.o):virarch.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):viralloc.c:(.bss+0x0): first defined here
./.libs/libvirt_util.a(libvirt_util_la-viratomic.o):viratomic.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):/home/berrange/src/virt/libvirt/src/util/viralloc.c:87: first defined here
./.libs/libvirt_util.a(libvirt_util_la-viraudit.o):viraudit.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):/home/berrange/src/virt/libvirt/src/util/viralloc.c:87: first defined here
./.libs/libvirt_util.a(libvirt_util_la-virauth.o):virauth.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):/home/berrange/src/virt/libvirt/src/util/viralloc.c:87: first defined here
./.libs/libvirt_util.a(libvirt_util_la-virauthconfig.o):virauthconfig.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
...snip...
The cause is our VIR_EXPORT_VAR macro which has some
magic on win to add dllexport/dllimport to the variable
declaration. Unfortunately the dllexport branch missed
off the 'extern' keyword, so the header file was in
fact declaring an instance of the variable in every
source file.
Previously the linker would merge all these definitions
into one, but that no longer happens due to -fno-common
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new secret usage type known as "tls" - it will handle adding the
secret objects for various TLS objects that need to provide some sort
of passphrase in order to access the credentials.
The format is:
<secret ephemeral='no' private='no'>
<description>Sample TLS secret</description>
<usage type='tls'>
<name>mumblyfratz</name>
</usage>
</secret>
Once defined and a passphrase set, future patches will allow the UUID
to be set in the qemu.conf file and thus used as a secret for various
TLS options such as a chardev serial TCP connection, a NBD client/server
connection, and migration.
Signed-off-by: John Ferlan <jferlan@redhat.com>
With current perf framework, this patch adds support and documentation
for more perf events, including cache misses, cache references, cpu cycles,
and instructions.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
This event is emitted when a nodedev XML definition is updated,
like when cdrom media is changed in a cdrom block device.
Also includes node device update event implementation for udev
backend, virsh nodedev-event support, and event-test support
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
Node device lifecycle event API entry points for registering and
deregistering node deivce events, as well as types of events
associated with node device.
These entry points will be used for implementing asynchronous
lifecycle events.
Node device API:
virConnectNodeDeviceEventRegisterAny
virConnectNodeDeviceEventDeregisterAny
virNodeDeviceEventLifecycleType which has events CREATED and DELETED
QEMU reports timestamp along with other memory statistics, but this information is not saved into domain statistics.
It could be useful to determine if the data reported is fresh or not.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
'memtotal' in virtio drivers and qemu corresponds to 'available' in libvirt.
Because of that, 'stat-available-memory' is renamed into 'usable'.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
Add a new secret type known as "passphrase" - it will handle adding the
secret objects that need a passphrase without a specific username.
The format is:
<secret ...>
<uuid>...</uuid>
...
<usage type='passphrase'>
<name>mumblyfratz</name>
</usage>
</secret>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Similarly to what virsh virt-login-shell do, call virAdmInitialize prior to
initializing an event loop and initializing the error handler. Commit 97973ebb7
described and fixed an identical issue for libvirt_lxc.
Since virAdmInitialize becomes a public API after applying this patch,
the symbol is also added to public syms and the doc string of the method is
slightly enhanced analogically to virInitialize.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch enables admin socket creation in daemon's code, bumps the library
version in libvirt_admin_public.syms, and performs all necessary modifications
to our makefiles so that admin API can finally be included in the tarball,
and eventually become part of an rpm package (a patch later in this series).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
They can be used to tune auto-convergence algorithm (which is enabled
with VIR_MIGRATE_AUTO_CONVERGE).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To allow finer-grained control of vcpu state using guest agent this API
can be used to individually set the state of the vCPU.
This will allow to better control NUMA enabled guests and/or test
various vCPU configurations.
Add a rather universal API implemented via typed params that will allow
to query the guest agent for the state and possibly other aspects of
guest vcpus.
Storage pool lifecycle event API entry points for registering and deregistering
storage pool events, as well as types of events associated with storage pools.
These entry points will be used for implementing asynchronous lifecycle events.
Storage pool API:
virConnectStoragePoolEventRegisterAny
virConnectStoragePoolEventDeregisterAny
virStoragePoolEventLifecycleType which has events STARTED, STOPPED, DEFINED,
UNDEFINED, and REFRESHED
Add the virDomainLxcEnterCGroup API to the libvirt-lxc.so
file. This method moves the calling process into the cgroups
associated with the container.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Apparently, 1 << 31 is signed which in turn does not fit into
a signed integer variable:
../../include/libvirt/libvirt-domain.h:1881:57: error: result of '1 << 31' requires 33 bits to represent, but 'int' only has 32 bits [-Werror=shift-overflow=]
VIR_CONNECT_GET_ALL_DOMAINS_STATS_ENFORCE_STATS = 1 << 31, /* enforce requested stats */
^~
cc1: all warnings being treated as errors
The solution is to make it an unsigned value. I've found only two
such occurrences in our code base.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some Intel processor families (e.g. the Intel Xeon processor E5 v3
family) introduced some RDT (Resource Director Technology) features
to monitor or control shared resource. Among these features, MBM
(Memory Bandwidth Monitoring), which is build on the CMT (Cache
Monitoring Technology) infrastructure, provides OS/VMM a way to
monitor bandwidth from one level of cache to another.
With current perf framework, this patch adds support to perf event
for MBM.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Opposite operation to virAdmServerGetClientLimits. Understandably though,
setting values for current number of clients connected or still waiting
for authentication does not make sense, since changes to these values are event
dependent, i.e. a client connects - counter is increased. Thus only the limits
to maximum clients connected and waiting for authentication can be set. Should
a request for other controls to be set arrive (provided such a setting will
be first introduced to the config), the set of configuration controls can be
later expanded (thanks to typed params). This patch also introduces a
constraint that the maximum number of clients waiting for authentication has to
be less than the overall maximum number of clients connected and any attempt to
violate this constraint will be denied.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Enable retrieval of the number of maximum clients connected to all sockets
combined, as well as the number of maximum clients waiting for authentication,
in order to be successfully connected. These are the attributes configurable
through libvirtd.conf, however, it could be handy to not only know values for
these limits, but also the values for the current number of clients
connected and number of clients currently waiting for authentication which are
changing dynamically. This API does both, retrieves the limits as well as the
current dynamic values.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In order for typed params validation to pass on daemon side, we should
encourage users to use our exported constants with typed params to diminish
to avoid any potential problems related to argument validity.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This is just a trivial cosmetic change, throughout all the APIs the argument
is called conn as from 'connection', having 'dmn' at just this single place
might look odd, so better change it now when the interface is still explicitly
disabled and we still have the ability to alter the signatures and public
names before officially enabling it.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Once we're able to list and identify all clients connected to a specific
server, we can then support force-closing a connection. This patch introduces
a simple API calling virNetServerClientClose on a specific client, which
can be later extended easily, e.g. by sending an event once the client is
disconnected successfully.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Expose a public API to retrieve some identity and connection information about
a client connected to the specified server on daemon. The identity info
retrieved is mostly connection transport dependent, i.e. there won't be any
socket address returned for a local (UNIX socket) connection, while on the
other hand, when connected through TLS or unencrypted TCP, obviously no UNIX
process identification will be present in the returned data. All supported
values that can be returned in typed params are exposed and documented in
include/libvirt/libvirt-admin.h
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch could easily be squashed with the virAdmClientGetInfo method
introduced later one, but the idea was to split the logic to as many preferably
independent patches as possible. As the subject hints, this patch defines
some public typed params-related macros used within virAdmClientGetInfo
method. The thing is, there's one identity attribute missing in the set --
SELinux context, which libvirt internally supports in virIdentity, but it
doesn't seem to do much (or anything at all), so there's some room to extend
the set in the future.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Just like with server-related APIs, before any of client-based APIs can be
called, a reference to a client-side client object needs to be obtained. For
this purpose, a lookup method should exist. Apart from the client retrieval
logic, a new error code for non-existent client had to be added as well.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Besides ID, the object also stores static data like connection transport and
connection timestamp, since once obtained a list of all clients connected to a
server, from user's perspective, it would be nice to know whether a given
client is remote or local only and when did it connect to the daemon.
Along with the object introduction, all necessary client-side methods necessary
to work with the object are added as well.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Our docs/web generator would take the complete license text and put it
into the description of the file, since it depends on position of the
"Author:" line. Move the author line to the top and remove the spurious
emacs comment.
Since threadpool increments the current number of threads according to current
load, i.e. how many jobs are waiting in the queue. The count however, is
constrained by max and min limits of workers. The logic of this new API works
like this:
1) setting the minimum
a) When the limit is increased, depending on the current number of
threads, new threads are possibly spawned if the current number of
threads is less than the new minimum limit
b) Decreasing the minimum limit has no possible effect on the current
number of threads
2) setting the maximum
a) Icreasing the maximum limit has no immediate effect on the current
number of threads, it only allows the threadpool to spawn more
threads when new jobs, that would otherwise end up queued, arrive.
b) Decreasing the maximum limit may affect the current number of
threads, if the current number of threads is less than the new
maximum limit. Since there may be some ongoing time-consuming jobs
that would effectively block this API from killing any threads.
Therefore, this API is asynchronous with best-effort execution,
i.e. the necessary number of workers will be terminated once they
finish their previous job, unless other workers had already
terminated, decreasing the limit to the requested value.
3) setting priority workers
- both increase and decrease in count of these workers have an
immediate impact on the current number of workers, new ones will be
spawned or some of them get terminated respectively.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
New API to retrieve current server workerpool specs. Since it uses typed
parameters, more specs to retrieve can be further included in the pool of
supported ones.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Before any getter or setter methods can be introduced, first specify a set of
public attributes/flags that these methods will be compatible with.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commits 0472cef6, 9afc115f, 8cd1d546 exported typed params handlers internally,
but a commit which would move the public definition from libvirt-host to
libvirt-common was missing.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Migration API allows to specify a destination domain configuration.
Offline domain has only inactive XML and it is replaced by configuration
specified using VIR_MIGRATE_PARAM_DEST_XML param. In case of live
migration VIR_MIGRATE_PARAM_DEST_XML param is applied for active XML.
This commit introduces the new VIR_MIGRATE_PARAM_PERSIST_XML param
that can be used within live migration to replace persistent/inactive
configuration.
Required for: https://bugzilla.redhat.com/show_bug.cgi?id=835300
Ploop image consists of directory with two files: ploop image itself,
called root.hds and DiskDescriptor.xml that contains information about
ploop device: https://openvz.org/Ploop/format.
Such volume are difficult to manipulate in terms of existing volume types
because they are neither a single files nor a directory.
This patch introduces new volume type - ploop. This volume type is used
by ploop volume's exclusively.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The reason for this is to fix the automatic rebuild of libvirt-common.h.in.
All *.in files should be automatically rebuilt each time they're modified.
It works well for makefiles and pkgconfig files, since they do have a valid
dependency in the top-level Makefile. However, with libvirt-common.h.in
there is no dependency in the top-level Makefile and there's no need for it
either, so this rule
include/libvirt/libvirt-common.h: $(top_builddir)/config.status \
$(top_srcdir)/include/libvirt/libvirt-common.h.in
cd $(top_builddir) && $(SHELL) ./config.status $@
is never hit and should be moved to include/Makefile, but that's automake's
job. According to GNU automake docs:
"Files created by AC_CONFIG_FILES, be they
Automake Makefiles or not, are all removed by ‘make distclean’. Their inputs
are automatically distributed, unless they are the output of prior
AC_CONFIG_FILES commands. Finally, rebuild rules are generated in the Automake
Makefile existing in the subdirectory of the output file, if there is one, or
in the top-level Makefile otherwise."
Which means that if we want to have the rule for libvirt-common.h automatically
generated by automake, the include/Makefile.am needs to be moved into libvirt/
subdirectory and $SUBDIRS in the top-level Makefile need to be adjusted as
well. This patch moves Makefile.am from include/ to include/libvirt, adjusting
the prefixes accordingly as well as updates the top-level Makefile $SUBDIRS to
properly hint automake to generate all rules at proper places.
Best way to see the changes, use -M with 'git show'.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch implement a set of interfaces for perf event. Based on
these interfaces, we can implement internal driver API for perf,
and get the results of perf conuter you care about.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-4-git-send-email-qiaowei.ren@intel.com
API agreed on in
https://www.redhat.com/archives/libvir-list/2015-October/msg00872.html
* include/libvirt/libvirt-domain.h (virDomainGetPerfEvents,
virDomainSetPerfEvents): New declarations.
* src/libvirt_public.syms: Export new symbols.
* src/driver-hypervisor.h (virDrvDomainGetPerfEvents,
virDrvDomainSetPerfEvents): New typedefs.
* src/libvirt-domain.c: Implement virDomainGetPerfEvents and
virDomainSetPerfEvents.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-2-git-send-email-qiaowei.ren@intel.com
To use post-copy one has to start the migration with
VIR_MIGRATE_POSTCOPY flag and, while migration is in progress, call
virDomainMigrateStartPostCopy() to switch from pre-copy to post-copy.
Signed-off-by: Cristian Klein <cristiklein@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.
In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
It does not have a suffix ByName because there are no other means of
looking up the server and since the name is known, this should be the
preferred one.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some hypervisors (namely qemu) can have a separate connecton for
non-shared disks migration of active domains. Currently we have
no means to control the port of such a connection. At the same
time we have options to control port of memory migration traffic
(thru migration uri) as well as interfaces that target server
is bound to for incoming migration (thru VIR_MIGRATE_PARAM_LISTEN_ADDRESS).
Let's add the option for setting disks port too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This serves the same purpose as VIR_ERR_NO_xxx where xxx is any object
that API can be called upon. Only this particular one is used for
daemon's servers.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This parameter represents top level period cgroup
that limits whole domain enforcement period for a quota
Signed-off-by: Alexander Burluka <aburluka@virtuozzo.com>
When there isn't a ssh -X type session running and a user has not
been added to the libvirt group, attempts to run 'virsh -c qemu:///system'
commands from an otherwise unprivileged user will fail with rather
generic or opaque error message:
"error: authentication failed: no agent is available to authenticate"
This patch will adjust the error code and message to help reflect the
situation that the problem is the requested mechanism is UNAVAILABLE and
a slightly more descriptive error. The result on a failure then becomes:
"error: authentication unavailable: no polkit agent available to
authenticate action 'org.libvirt.unix.manage'"
A bit more history on this - at one time a failure generated the
following type message when running the 'pkcheck' as a subprocess:
"error: authentication failed: polkit\56retains_authorization_after_challenge=1
Authorization requires authentication but no agent is available."
but, a patch was generated to adjust the error message to help provide
more details about what failed. This was pushed as commit id '96a108c99'.
That patch prepended a "polkit: " to the output. It really didn't solve
the problem, but gave a hint.
After some time it was deemed using DBus API calls directly was a
better way to go (since pkcheck calls them anyway). So, commit id
'1b854c76' (more or less) copied the code from remoteDispatchAuthPolkit
and adjusted it. Then commit id 'c7542573' adjusted the remote.c
code to call the new API (virPolkitCheckAuth). Finally, commit id
'308c0c5a' altered the code to call DBus APIs directly. In doing
so, it reverted the failing error message to the generic message
that would have been received from DBus anyway.
This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is the key structure of all management operations performed on the
daemon/clients. An admin client needs to be able to identify
another client (either admin or non-privileged client) to perform an
action on it. This identification includes a server the client is
connected to, thus a client-side representation of a server is needed.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In my previous commit a70f3b1c77 I've tried to fix case
when building from VPATH and a file wasn't being installed.
However, my fix broke non-VPATH build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The libvirt-common.h is build time generated file from .in.
Obviously, it's generated into builddir and not srcdir. Problem
is, the list of header files to install, virinc_HEADERS contains
only $(srcdir)/*.h and this misses libvirt-common.h. This problem
is pretty obvious when doing a VPATH build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This new algorithm adds support for wiping volumes using TRIM.
It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.
It depends on the backing storage pool how this is handled.
A SCSI backend might send UNMAP commands to remove all data present
on a LUN.
A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
So after da176bf6b7 and friend we have switched to $(wildcard
some/path/*.xml) instead of enumerating the files explicitly.
This is nice, however it makes distcheck build from VPATH fail.
The reason is that it's is not obvious to what does the wildcard
refer to: srcdir or builddir?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commmit df8192aa introduced admin related rename and some minor
(caused by automated approach, aka sed) and some more severe isues along with
it. First reason to revert is the inconsistency with libvirt library.
Although we deal with the daemon directly rather than with a specific
hypervisor, we still do have a connection. That being said, contributors might
get under the impression that AdmDaemonNew would spawn/start a new daemon
(since it's admin API, why not...), or AdmDaemonClose would do the exact
opposite or they might expect DaemonIsAlive report overall status of the daemon
which definitely isn't the case.
The second reason to revert this patch is renaming virt-admin client. The
client tool does not necessarily have to reflect the names of the API's it's
using in his internals. An example would be 's/vshAdmConnect/vshAdmDaemon'
where noone can be certain of what the latter function really does. The former
is quite expressive about some connection magic it performs, but the latter does
not say anything, especially when vshAdmReconnect and vshAdmDisconnect were
left untouched.
https://bugzilla.redhat.com/show_bug.cgi?id=830056
Add flags handling to the virStoragePoolCreate and virStoragePoolCreateXML
API's which will allow the caller to provide the capability for the storage
pool create API's to also perform a pool build during creation rather than
requiring the additional buildPool step. This will allow transient pools
to be defined, built, and started.
The new flags are:
* VIR_STORAGE_POOL_CREATE_WITH_BUILD
Perform buildPool without any flags passed.
* VIR_STORAGE_POOL_CREATE_WITH_BUILD_OVERWRITE
Perform buildPool using VIR_STORAGE_POOL_BUILD_OVERWRITE flag.
* VIR_STORAGE_POOL_CREATE_WITH_BUILD_NO_OVERWRITE
Perform buildPool using VIR_STORAGE_POOL_BUILD_NO_OVERWRITE flag.
It is up to the backend to handle the processing of build flags. The
overwrite and no-overwrite flags are mutually exclusive.
NB:
This patch is loosely based upon code originally authored by Osier
Yang that were not reviewed and pushed, see:
https://www.redhat.com/archives/libvir-list/2012-July/msg01328.html
virAdmConnect was named after virConnect, but after some discussions,
most of the APIs called will be working with remote daemon and starting
them virAdmDaemon will make more sense. Only possibly controversal name
is CloseCallback (de)registration, and connecting to the daemon (which
will still be Open/Close), but even this makes sense if one thinks about
the daemon being opened and closed, e.g. as file, etc.
This way all the APIs working with the daemon will start with
virAdmDaemon prefix, they will accept virAdmDaemonPtr as first parameter
and that will better suit with other namings as well (virDomain*,
virAdmServer*, etc.).
Because in virt-admin, the connection name does not refer to a struct
that would have a connect in its name, also adjust 'connname' in
clients. And because it is not used anywhere in the vsh code, move it
from there into each client.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introduce a new API to get libvirt version. It is worth noting, that
libvirt-admin and libvirt share the same version number. Unfortunately,
our existing API isn't generic enough to be used with virAdmConnectPtr
as well. Also this patch wires up this API to the virt-admin client
as a generic cmdVersion command.
As we need a client disconnect handler, we also need a mechanism to register
such handlers for a client. This patch introduced both the close callbacks and
also the client vshAdmCatchDisconnect handler to be registered with it. By
registering the handler we still need to make sure the client can react to
daemon's events like disconnect or keepalive, so asynchronous I/O event polling
is necessary to be enabled too.
Since most of our APIs rely on an acive functional connection to a daemon and
we have such a mechanism in libvirt already, there's need to have such a way in
libvirt-admin as well. By introducing a new public API, this patch provides
support to check for an active connection.
Unfortunately, client side version retrieval API virGetVersion uses
one-time initialization (due to the fact we might not have initialized the
library by calling connect prior to this) which is not completely compatible
with admin initialization. This API is rather simplistic and reimplementing
it for admin might be the preferred method of reusing it. Note that even though
the method will be reimplemented, the version number is still the same for both
the libvirt and libvirt-admin library.
As it turned out, we need to share some enums and declarations between
libvirt.h and libvirt-admin.h, but since our policy forbids direct includes of
libvirt*.h, there has to be some header exempt from this rule. This patch moves
the relevant part of code from libvirt.h.in to libvirt-common.h.in. Moreover,
since there is no need to have libvirt.h generated anymore, introduce a new
header libvirt.h which was previosly ignored from git and make the common
header ignored and generated instead.
Copy the virtlockd codebase across to form the initial virlogd
code. Simple search & replace of s/lock/log/ and gut the remote
protocol & dispatcher. This gives us a daemon that starts up
and listens for connections, but does nothing with them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a RBD volume has snapshots it can not be removed.
This patch introduces a new flag to force volume removal,
VIR_STORAGE_VOL_DELETE_WITH_SNAPSHOTS.
With this flag any existing snapshots will be removed prior to
removing the volume.
No existing mechanism in libvirt allowed us to pass such information,
so that's why a new flag was introduced.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Also, among with this new API new ACL that restricts rename
capability is invented too.
Signed-off-by: Tomas Meszaros <exo@tty.sk>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a public library, it shouldn't include anything that is
internal. Including the library in it's current state to an example
application fails the preprocessor phase.
virDomainMigrateFinish* APIs were unfortunately designed to return the
pointer to the domain on destination and NULL on error. This looks OK in
normal cases but the same API is also called when we know migration
failed and thus we expect Finish to return NULL even if it actually did
all it was supposed to do without any error. The call is defined to
return nonnull domain pointer over RPC, which means returning NULL will
always result in an error being send. If this was not in fact an error,
the API itself wouldn't set anything to the thread local virError, which
makes the RPC layer come up with it's own "Library function returned
error but did not set virError" error.
This is quite confusing and also hard to detect by the caller. This
patch adds a special error code which can be used to check that Finish
successfully aborted migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Don't listen on the admin socket in the daemon and comment out the
admin devel files out of specfile.
Library is still being compiled and installed in order to link easily
without any disturbing modifications to the daemon code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1203032
Implement a `migrate_disks' parameters for the QEMU driver. This multi-
value parameter can be used to explicitly specify what block devices
are to be migrated using the NBD server. Tunnelled migration using NBD
is to be done.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The `virTypedParamsAddStringList' function provides interface to add a
NULL-terminated array of string values as a multi-value to the params.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just one of the simplest functions that returns string "Clients: X"
where X is the number of connected clients to daemon's first
subserver (the original one), so it can be tested using virsh, ipython,
etc.
The subserver is gathered by incrementing its reference
counter (similarly to getting qemu capabilities), so there is no
deadlock with admin subserver in this API.
Here you can see how functions should be named in the client (virAdm*)
and server (adm*).
There is also a parameter @flags that must be 0, which helps testing
proper error propagation into the client.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Initial scratch of the admin library. It has its own virAdmConnectPtr
that inherits from virAbstractConnectPtr and thus trivially supports
error reporting.
There's pkg-config file added and spec-file adjusted as well.
Since the library should be "minimalistic" and not depend on any other
library, the list of files is especially crafted for it. Most of them
could've been put to it's own sub-libraries that would be LIBADD'd to
libvirt_util, libvirt_net_rpc and libvirt_setuid_rpc_client to minimize
the number of object files being built, but that's a refactoring that
isn't the orginal aim of this commit.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For setting passwords of users inside the domain.
With the VIR_DOMAIN_PASSWORD_ENCRYPTED flag set, the password
is assumed to be already encrypted by the method required
by the guest OS.
https://bugzilla.redhat.com/show_bug.cgi?id=1174177
On the s/390x architecture, libvirt may already return 0 in the
node_info->mhz field (see src/nodeinfo.c:linuxNodeInfoCPUPopulate).
We may also want to return this on aarch64 in future, because
calculating the proper value requires SMBIOS, which is not available
on non-server-class systems (specifically on systems which don't
adhere to the SBSA standard).
Therefore this change documents the existing behaviour and provides a
valid path for aarch64.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Bug-URL: https://bugzilla.redhat.com/1206353
virDomainGetJobStats is able to report statistics of a completed
migration, however to get usable downtime and total time statistics both
hosts have to keep synchronized time. To provide at least some
estimation of the times even when NTP daemons are not running on both
hosts we can just ignore the time needed to transfer a migration cookie
to the destination host. The result will be also inaccurate but a bit
more predictable. The total/down time will just be at least what we
report.
https://bugzilla.redhat.com/show_bug.cgi?id=1213434
When we shutdown/reboot a guest using agent-mode, if the guest itself blocks infinitely,
libvirt would block in qemuAgentShutdown() forever.
Thus, we set a timeout for shutdown/reboot, from our experience, 60 seconds would be fine.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Each thread can use a thread local variable to keep the name of a job
which is currently running in the job.
The virThreadJobSetWorker API is supposed to be called once by any
thread which is used as a worker, i.e., it is waiting in a pool, woken
up to do a job, and returned back to the pool.
The virThreadJobSet/virThreadJobClear APIs are to be called at the
beginning/end of each job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Not all NICs (esp. the virtual ones like TUN) must have a hardware
address. Teach our RPC that it's possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Define helper function virDomainInterfaceFree, which allows
the upper layer application to free the domain interface object
conveniently.
The API is going to provide multiple methods by flags, e.g.
* Query guest agent
* Parse DHCP lease file
include/libvirt/libvirt-domain.h
* Define virDomainInterfaceAddresses, virDomainInterfaceFree
* Define structs virDomainInterface, virDomainIPAddress
src/driver-hypervisor.h:
* Define domainInterfaceAddresses
src/libvirt-domain.c:
* Implement virDomainInterfaceAddresses
* Implement virDomainInterfaceFree
src/libvirt_public.syms:
* Export the new symbols
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Add virDomainPinIOThread to allow setting the CPU affinity for a specific
IOThread based on the output generated from virDomainGetIOThreadsInfo
The API supports updating both the --live domain and the --config data
Add virDomainGetIOThreadInfo in order to return a list of
virDomainIOThreadInfoPtr structures which list the IOThread ID
and the CPU Affinity map for each IOThread for the domain.
For an active domain, the live data will be returned, while for
an inactive domain, the config data will be returned.
The API supports either the --live or --config flag, but not both.
Also added virDomainIOThreadsInfoFree in order to free the cpumap
and the IOThreadInfo structure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Previously when a domain would get stuck in a domain job due to a
programming mistake we'd report the following control state:
$ virsh domcontrol domain
occupied (1424343406.150s)
The timestamp is invalid as the monitor was not entered for that domain.
We can use that to detect that the domain has an active job and report a
better error instead:
$ virsh domcontrol domain
error: internal (locking) error
When creating a RAW file, we don't take advantage
of clone of btrfs.
Add a VIR_STORAGE_VOL_CREATE_REFLINK flag to request
a reflink copy.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
The virDomainDefineXML method is one of the few that still lacks
an 'unsigned int flags' parameter. This will be needed for adding
XML validation to this API. virDomainCreateXML fortunately already
has flags.
The members of struct virSecurityLabel and struct virSecurityModel
were not shown in the libvirt API docs because the corresponding
<field> elements were missing from the libvirt-api.xml.
The reason is that apibuild.py does not cope well with typedef's
using inline struct definitions. It fails to associate the comment
with the typedef and because of this refuses to write out the
field of the struct.
This patch introduces access to allocation information about
a backing chain of a live domain. While querying storage
volumes for read-only disks could provide some of the details,
we do NOT want to read() a file while qemu is writing it.
Also, there is one case where we have to rely on qemu: when
doing a block commit into a backing file, where that file is
stored in qcow2 format on a host block device, we want to know
the current highest write offset into that image, in order to
know if the disk must be resized larger. qemu-img does not
(currently) show this information, and none of the earlier
block APIs were extensible enough to expose it. But
virDomainListGetStats is perfect for the job!
We don't need a new group of statistics, as the existing block
group is sufficient. On the other hand, as existing libvirt
releases already report 1:1 mapping of block.count to <disk>
devices, changing the array size could confuse older clients;
and even with newer clients, the time and memory taken to
report additional statistics is not always necessary (backing
files are generally read-only except for block-commit, so while
read statistics may change, sizing statistics will not). So
the choice here is to add a new flag that only newer callers
will pass, when they are prepared for the additional information.
This patch introduces the new API, but it will take more
patches to get it implemented for qemu.
* include/libvirt/libvirt-domain.h
(VIR_CONNECT_GET_ALL_DOMAINS_STATS_BACKING): New flag.
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document it,
and add a new field when it is in use.
* tools/virsh-domain-monitor.c (cmdDomstats): Use new flag.
* tools/virsh.pod (domstats): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
The documentation for virDomainBlockInfo was confusing: it stated
that 'physical' was the size of the container, then gave an example
of it being the amount of storage used by a sparse file (that is,
for a sparse raw image on a regular file, the wording implied
capacity==physical, while allocation was smaller; but the example
instead claimed physical==allocation). Since we use 'physical' for
the last offset of a block device, we should do likewise for
regular files.
Furthermore, the example claimed that for a qcow2 regular file,
allocation==physical. At the time the code was first written,
this was true (qcow2 files were allocated sequentially, and were
never sparse, so the last sector written happened to also match
the disk space occupied); but modern qemu does much better and
can punch holes for a qcow2 with allocation < physical.
Basically, after this patch, the three fields are now reliably
mapped as:
'capacity' - how much storage the guest can see (equal to
physical for raw images, determined by image metadata otherwise)
'allocation' - how much storage the image occupies (similar to
what 'du' would report)
'physical' - the last offset of the image (similar to what 'ls'
would report)
'capacity' can be larger than 'physical' (such as for a qcow2
image that does not vary much from a backing file) or smaller
(such as for a qcow2 file with lots of internal snapshots).
Likewise, 'allocation' can be (slightly) larger than 'physical'
(such as counting the tail of cluster allocations required to
round a file size up to filesystem granularity) or smaller
(for a sparse file). A block-resize operation changes capacity
(which, for raw images, also changes physical); many non-raw
images automatically grow physical and allocation as necessary
when starting with an allocation smaller than capacity; and even
when capacity and physical stay unchanged, allocation can change
when converting sectors from holes to data or back.
Note that this does not change semantics for qcow2 images stored
on block devices; there, we still rely on qemu to report the
highest written extent for allocation. So using this API to
track when to extend a block device because a qcow2 image is
about to exceed a threshold will not see any changes.
Also, note that virStorageVolInfo is unfortunately limited to
just 'capacity' and 'allocation' (we can't expand it to add
'physical', although we can expand the XML to add it there);
historically, that struct's 'allocation' value has reported
file size for qcow2 files (what this patch terms 'physical'
for a domain block device), but disk usage for raw files (what
this patch terms 'allocation'). So follow-up patches will be
needed to make storage volumes report the same allocation
values and get at physical values, where those differ.
* include/libvirt/libvirt-domain.h (_virDomainBlockInfo): Tweak
documentation to match saner definition.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): For regular
files, physical size is capacity, not allocation.
Signed-off-by: Eric Blake <eblake@redhat.com>
The apibuild.py script did not handle whitespace in preprocessor
macros, so it failed to detect constants declared with '# define'
instead of '#define'. Since we now correctly indent our public
header files, we have silently lost all constants from
libvirt-api.xml. This also caused us to not detect formatting
errors in constant docs
This changes the display from:
libvirt-storage: APIs for management of storages
to
libvirt-storage: APIs for management of storage pools and volumes
In making that change I expected my build tree html output to be
regenerated; however, it wasn't because the dependency for the separated
libvirt-storage.h wasn't there. It was only present for libvirt.h.in
So I added each in the order displayed on the docs/html/index.html page
virDomainGetFSInfo returns a list of filesystems information mounted in the
guest, which contains mountpoints, device names, filesystem types, and
device aliases named by libvirt. This will be useful, for example, to
specify mountpoints to fsfreeze when taking snapshot of a part of disks.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.
To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.
Add support for bps_max and friends in the driver part.
In the part checking if a qemu is running, check if the running binary
support bps_max, if not print an error message, if yes add it to
"info" variable
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The cfg.mk rule for checking preprocessor indentation was
mistakenly missing the libvirt.h.in file due to bad file
extension matching rule. Fix that and the resolve the
incorrect indentation that is identified.
Create a new libvirt-host.h file to hold the public
API definitions for the virConnect type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain.h file to hold the public
API definitions for the virDomain type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-event.h file to hold the public
API definitions for the virEvent type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-storage.h file to hold the public
API definitions for the virStorage/Vol type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-stream.h file to hold the public
API definitions for the virStream type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Note the definition of virStreamPtr is not moved, since that
must be declared early for all other libvirt APIs to be able
to reference it.
Create a new libvirt-secret.h file to hold the public
API definitions for the virSecret type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nodedev.h file to hold the public
API definitions for the virNodeDevice type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nwfilter.h file to hold the public
API definitions for the virNWFilter type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-interface.h file to hold the public
API definitions for the virInterface type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-network.h file to hold the public
API definitions for the virNetwork type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain-snapshot.h file to hold the public
API definitions for the virDomainSnapshot type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Aeons ago (commit 34dcbbb4, v0.8.2), we added a new libvirt event
(VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON) in order to tell the user WHY
the guest halted. This is because at least VDSM wants to react
differently to ENOSPC events (resize the lvm partition to be larger,
and resume the guest as if nothing had happened) from all other events
(I/O is hosed, throw up our hands and flag things as broken). At the
time this was done, downstream RHEL qemu added a vendor extension
'__com.redhat_reason', which would be exactly one of these strings:
"enospc", "eperm", "eio", and "eother". In our stupidity, we exposed
those exact strings to clients, rather than an enum, and we also
return "" if we did not have access to a reason (which was the case
for upstream qemu).
Fast forward to now: upstream qemu commit c7c2ff0c (will be qemu 2.2)
FINALLY adds a 'nospace' boolean, after discussion with multiple
projects determined that VDSM really doesn't care about distinction
between any other error types. So this patch converts 'nospace' into
the string "enospc" for compatibility with RHEL clients that were
already used to the downstream extension, while leaving the reason
blank for all other cases (no change from the status quo).
See also https://bugzilla.redhat.com/show_bug.cgi?id=1119784
* src/qemu/qemu_monitor_json.c (qewmuMonitorJSONHandleIOError):
Parse reason field from modern qemu.
* include/libvirt/libvirt.h.in
(virConnectDomainEventIOErrorReasonCallback): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
For the new VIR_DOMAIN_EVENT_ID_TUNABLE event we have a bunch of
constants added
VIR_DOMAIN_EVENT_CPUTUNE_<blah>
VIR_DOMAIN_EVENT_BLKDEVIOTUNE_<blah>
This naming convention is bad for two reasons
- There is no common prefix unique for the events to both
relate them, and distinguish them from other event
constants
- The values associated with the constants were chosen
to match the names used with virConnectGetAllDomainStats
so having EVENT in the constant name is not applicable in
that respect
This patch proposes renaming the constants to
VIR_DOMAIN_TUNABLE_CPU_<blah>
VIR_DOMAIN_TUNABLE_BLKDEV_<blah>
ie, given them a common VIR_DOMAIN_TUNABLE prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the universal tunable event to report changes to user. All
blkdeviotune values are prefixed with "blkdeviotune".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
A long time ago in a galaxy far, far away it has been decided
that libvirt will manage not only domains but host as well. And
with my latest work on qemu driver supporting huge pages, we miss
the cherry on top: an API to allocate huge pages on the run.
Currently users are forced to log into the host and adjust the
huge pages pool themselves. However, with this API the problem
is gone - they can both size up and size down the pool.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are now two places in libvirt which use polkit. Currently
they use pkexec, which is set to be replaced by direct DBus API
calls. Add a common API which they will both be able to use for
this purpose.
No tests are added at this time, since the impl will be gutted
in favour of a DBus API call shortly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now we have universal tunable event so we can use it for reporting
changes to user. The cputune values will be prefixed with "cputune" to
distinguish it from other tunable events.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
RDMA Live migration requires registering memory with the hardware, and
thus QEMU offers a new 'capability' to pre-register / mlock() the guest
memory in advance for higher RDMA performance before the migration
begins. This capability is disabled by default, which means QEMU will
register the memory with the hardware in an on-demand basis.
This patch exposes this capability with the following example usage:
virsh migrate --live --rdma-pin-all --migrateuri rdma://hostname domain qemu+ssh://hostname/system
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
RDMA migration uses the 'setup' state in QEMU to optionally lock
all memory before the migration starts. The total time spent in
this state is exposed as VIR_DOMAIN_JOB_SETUP_TIME.
Additionally, QEMU also exports migration throughput (mbps) for both
memory and disk, so let's add them too: VIR_DOMAIN_JOB_MEMORY_BPS,
VIR_DOMAIN_JOB_DISK_BPS.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
