It will be used to represent the type of a filesystem pool in ESXi.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Previous patch made it possible for the QEMU driver to check if
a given PCI hostdev is unassigned, by checking if dev->info->type is
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_UNASSIGNED, meaning that this device
shouldn't be part of the actual guest launch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.
This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.
Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the validation of vmcoreinfo from qemuBuildVMCoreInfoCommandLine()
to qemuDomainDefValidateFeatures(), allowing for validation
at domain define time.
qemuxml2xmltest.c was changed to account for this caps being
now validated at this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move smartcard validation being done by qemuBuildSmartcardCommandLine()
to the existing qemuDomainSmartcardDefValidate() function. This
function is called by qemuDomainDeviceDefValidate(), allowing smartcard
validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the NVDIMM validation from qemuBuildMachineCommandLine()
to a new function in qemu_domain.c, qemuDomainDeviceDefValidateMemory(),
which is called by qemuDomainDeviceDefValidate(). This allows
NVDIMM validation to occur in domain define time.
It also increments memory hotplug validation, which can be seen
by the failures in the hotplug tests in qemuxml2xmltest.c that
needed to be adjusted after the move.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In testXLInitDriver() a dummy driver structure is filled and it
is freed later in testXLFreeDriver(). However, it is sufficient
to unref just driver->config because that results in
libxlDriverConfigDispose() being called which unrefs
driver->config->caps. There is no need to unref it again in
testXLFreeDriver() - in fact it's undesired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When generating domain capabilities, we need to fake host CPU to
get reproducible result. We do this by copying a pre-existent CPU
config and setting VIR_TEST_MOCK_FAKE_HOST_CPU env variable which
is then consumed by qemucpumock. However, we forget to free the
CPU copy afterwards.
2,196 (2,016 direct, 180 indirect) bytes in 18 blocks are definitely lost in loss record 291 of 297
at 0x4838B86: calloc (vg_replace_malloc.c:762)
by 0x57CB6A0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.7)
by 0x4A0F72D: virCPUDefNew (cpu_conf.c:87)
by 0x4A0FAC7: virCPUDefCopyWithoutModel (cpu_conf.c:235)
by 0x4A0FBBE: virCPUDefCopy (cpu_conf.c:273)
by 0x10E3C0: testUtilsHostCpusGetDefForArch (testutilshostcpus.h:157)
by 0x10E3C0: fakeHostCPU (domaincapstest.c:61)
by 0x10E3C0: fillQemuCaps (domaincapstest.c:86)
by 0x10E3C0: test_virDomainCapsFormat (domaincapstest.c:234)
by 0x10F4BC: virTestRun (testutils.c:146)
by 0x10DE93: doTestQemuInternal (domaincapstest.c:301)
by 0x10E13D: doTestQemu (domaincapstest.c:332)
by 0x1124CF: testQemuCapsIterate (testutilsqemu.c:635)
by 0x10DCE3: mymain (domaincapstest.c:435)
by 0x10FD8B: virTestMain (testutils.c:916)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Assuming that the backing image format is raw is wrong when doing image
detection:
1) In -drive mode qemu will still probe the image format of the backing
image. This means it will try to open a backing file of the image
which will fail if a more advanced security model is in use.
2) In blockdev mode the image will be opened as raw actually which is
wrong since it might be qcow. Not opening the backing images will
also end up in the guest seeing corrupted data.
Rather than attempt to solve various corner cases when us assuming the
storage file being raw and actually being right forbid startup when the
guest image doesn't have the format specified in the metadata.
https://bugzilla.redhat.com/show_bug.cgi?id=1588373
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
EXP_WARN and ALLOW_PROBE flags for the testStorageChain cases are no
longer used so we can remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass in 'true' as '@report_broken' of virStorageFileGetMetadata to make
it fail in the tests. The most important code paths (when starting the
VM) expect this function to fail rather than silently return partial
data. Switch the test to exercise this more important code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With NVMe disks, one can start a blockjob with a NVMe disk
that is not visible in domain XML (at least right away). Usually,
it's fairly easy to override this limitation of
qemuDomainGetMemLockLimitBytes() - for instance for hostdevs we
temporarily add the device to domain def, let the function
calculate the limit and then remove the device. But it's not so
easy with virStorageSourcePtr - in some cases they don't
necessarily are attached to a disk. And even if they are it's
done later in the process and frankly, I find it too complicated
to be able to use the simple trick we use with hostdevs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now, that we have everything prepared, we can generate command
line for NVMe disks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This capability tracks if qemu is capable of:
-drive file.driver=nvme
The feature was added in QEMU's commit of v2.12.0-rc0~104^2~2.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The device configs (which are actually the same one config)
come from a NVMe disk of mine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To simplify implementation, some restrictions are added. For
instance, an NVMe disk can't go to any bus but virtio and has to
be type of 'disk' and can't have startupPolicy set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There is this class of PCI devices that act like disks: NVMe.
Therefore, they are both PCI devices and disks. While we already
have <hostdev/> (and can assign a NVMe device to a domain
successfully) we don't have disk representation. There are three
problems with PCI assignment in case of a NVMe device:
1) domains with <hostdev/> can't be migrated
2) NVMe device is assigned whole, there's no way to assign only a
namespace
3) Because hypervisors see <hostdev/> they don't put block layer
on top of it - users don't get all the fancy features like
snapshots
NVMe namespaces are way of splitting one continuous NVDIMM memory
into smaller ones, effectively creating smaller NVMe-s (which can
then be partitioned, LVMed, etc.)
Because of all of this the following XML was chosen to model a
NVMe device:
<disk type='nvme' device='disk'>
<driver name='qemu' type='raw'/>
<source type='pci' managed='yes' namespace='1'>
<address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
qemuBuildSoundCodecStr() validates if a given QEMU binary
supports the sound codec. This validation can be moved to
qemu_domain.c to be executed in domain define time.
The codec validation was moved to the existing
qemuDomainDeviceDefValidateSound() function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_OBJECT_USB_AUDIO and
QEMU_CAPS_DEVICE_ICH9_INTEL_HDA to a new function in qemu_domain.c,
qemuDomainDeviceDefValidateSound(). This function is called by
qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the SPICE caps validation from qemuBuildGraphicsSPICECommandLine()
to a new function called qemuDomainDeviceDefValidateSPICEGraphics().
This function is called by qemuDomainDeviceDefValidateGraphics(),
which in turn is called by qemuDomainDefValidate(), validating the graphics
parameters in domain define time.
This validation move exposed a flaw in the 'default-video-type' tests
for PPC64, AARCH64 and s390 archs. The XML was considering 'spice' as
the default video type, which isn't true for those architectures.
This was flying under the radar until now because the SPICE validation
was being made in 'virsh start' time, while the XML validation done in
qemuxml2xmltest.c considers define time.
All other tests were adapted to consider SPICE validation in this
earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the VNC cap validation from qemuBuildGraphicsVNCCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Tests were adapted to consider SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are validations for SDL, VNC, SPICE and EGL_HEADLESS
around several BuildGraphics*CommandLine in qemu_command.c. This
patch starts to move all of them to qemu_domain.c, inside the
existent qemuDomainDeviceDefValidateGraphics() function. This
function is called by qemuDomainDefValidate(), validating the
graphics parameters in domain define time.
In this patch we'll move the SDL validation code from
qemuBuildGraphicsSDLCommandLine(). Tests were adapted to consider
SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the pcihole64 validation being done by
qemuBuildGlobalControllerCommandLine() to the existing function
qemuDomainDeviceDefValidateControllerPCI(), which provides
domain define time validation.
The existing pcihole64 validations in qemu_domain.c were replaced
by the ones moved from qemu_command.c. The reason is that they
are more specific, allowing VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT
and VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT to have distinct validation,
with exclusive QEMU caps and machine types.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the boot validation being done by qemuBuildBootCommandLine()
to to a new qemuDomainDefValidateBoot() function. This new function
is called by qemuDomainDefValidate(), allowing boot validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the PM validation being done by qemuBuildPMCommandLine() to
to a new qemuDomainDefValidatePM() function. This new function
is called by qemuDomainDefValidate(), promoting PM validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
@def->clock validation is done by qemuBuildClockCommandLine() and
qemuBuildClockArgStr(). This patch centralize the validation done
in both these functions to a new qemuDomainDefValidateClockTimers()
function. This new function is then called by qemuDomainDefValidate(),
promoting clock validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of qemuBuildHostdevCommandLine() to
qemuDomainDeviceDefValidateHostdev() and qemuDomainMdevDefValidate(),
allowing them to be validated at domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_USB_HUB to a new function in
qemu_domain.c, qemuDomainDeviceDefValidateHub(). This function is
called by qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new function qemuDomainDeviceDefValidateNVRAM() was created
to validate the NVRAM in domain define time. Unit test was
adjusted to account for the extra QEMU_CAPS_DEVICE_NVRAM required
during domain define.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new qemuDomainDefValidateNuma() function was created to host
all the QEMU caps validation being done inside qemuBuildNumaArgStr().
This new function is called by qemuDomainValidateCpuCount()
to allow NUMA validation in domain define time.
Tests were changed to account for the QEMU capabilities
that need to be present at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virQEMUCapsSupportsVmport() is now being called inside
qemuDomainDefValidateFeatures() for VIR_DOMAIN_FEATURE_VMPORT
feature.
qemuxml2xmltest.c was changed to account for this caps being
now validated at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a new function called qemuDomainDefValidatePSeriesFeature()
that will center all the PSeries validation done in qemu_command.c.
qemuDomainDefValidatePSeriesFeature() is then called during domain
define time, in qemuDomainDefValidateFeatures().
qemuxml2argvtest.c is also changed to include all the caps that now
are being validated in define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Qemu commit e900135dcfb67 ("i386: Add CPUID bit for CLZERO and XSAVEERPTR")
adds support for CLZERO CPUID bit.
This commit extends support for this CPUID bit into libvirt.
Signed-off-by: Ani Sinha <ani.sinha@nutanix.com>
Message-Id: <1575371352-99055-1-git-send-email-ani.sinha@nutanix.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Following domain configuration changes create two memory bandwidth
monitors: one is monitoring the bandwidth consumed by vCPU 0,
another is for vCPU 5.
```
<cputune>
<memorytune vcpus='0-4'>
<node id='0' bandwidth='20'/>
<node id='1' bandwidth='30'/>
+ <monitor vcpus='0'/>
</memorytune>
+ <memorytune vcpus='5'>
+ <monitor vcpus='5'/>
+ </memorytune>
</cputune>
```
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
Originally, inside <cputune/cachetune>, it requires the <cache> element to
be in the position before <monitor>, and following configuration is not
permitted by schema, but it is better to let it be valid.
<cputune>
<cachetune vcpus='0-1'>
<monitor level='3' vcpus='0-1'/>
^
|__ Not permitted originally because it is in the place
before <cache> element.
<cache id='0' level='3' type='both' size='3' unit='MiB'/>
<cache id='1' level='3' type='both' size='3' unit='MiB'/>
</cachetune>
...
</cputune>
And, let schema do more strict check by identifying following configuration to
be invalid, due to <cachetune> should contain at least one <cache> or <monitor>
element.
<cputune>
<cachetune vcpus='0-1'>
^
|__ a <cachetune> SHOULD contain at least one <cache> or <monitor>
</cachetune>
...
</cputune>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
As of commit 2a00ef6e71 which
was released in v5.2.0, we require YAJL to build the QEMU driver.
Remove the checks from code that requires the QEMU driver
or checks that also check for WITH_QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add Hygon Dhyana CPU data test case related files.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yingle Hou <houyingle@hygon.cn>
Add Hygon Dhyana CPU model to the processor model.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yingle Hou <houyingle@hygon.cn>
Add test code which will crawl a fake internal list of checkpoints and
generate the list of bitmaps for merging to gather the final bitmap for
the backup.
The initial tests cover the basic case of all bitmaps being present in
the top layer of the backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add test data gathered from a run of qemu after creating bitmaps and
snapshots together in various combinations.
The following sequence of commands was used to achieve the
configuration:
virsh checkpoint-create-as VM --name a
virsh snapshot-create-as VM --disk-only
virsh snapshot-create-as VM --disk-only
virsh checkpoint-create-as VM --name b
virsh checkpoint-create-as VM --name c
virsh snapshot-create-as VM --disk-only
virsh checkpoint-create-as VM --name d
virsh snapshot-create-as VM --disk-only
virsh checkpoint-create-as VM --name current
Note that VM was restarted after these operations to allow renumbering
of the bitmaps in a more human-readable way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The real data gathered for the 'basic' test case don't exercise some
fields. Add a copy with a few values modified manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test the extraction of data about changed block tracking bitmaps. The
first test case adds a simple scenario of multiple bitmaps in one layer.
The test data will be also later reused for testing the code that
determines which bitmaps to merge for an incremental backup.
The sequence of bitmaps was created by the libvirt checkpoint API with
the following sequence of commands:
virsh checkpoint-create-as VM --name a
virsh checkpoint-create-as VM --name b
virsh checkpoint-create-as VM --name c
virsh checkpoint-create-as VM --name d
virsh checkpoint-create-as VM --name current
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Don't check os type / virt type / arch in the post-parse callback
because we can't assume qemuCaps is non-NULL at this point. It
also conceptually belongs to the validation callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The status XML represents a running VM, so we should always have an
ID present for the domain.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since blockcommit is asynchronous, libvirtd can be restarted while the
operation runs. To ensure the information necessary to finish up the job
is not lost, serialisation to and deserialisation from the status XML is
added.
To unittest this, the new element was only added to the active commit test,
the non-active commit test doesn't have the new element so as to test its
absence.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extend configure to pass the detect python binary to C code, and
use it in the test suite, rather than searching PATH
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The path needs to be adjusted for the new script location
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the transaction actions generator for blockdev-backup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the parser and formatter are in place we can exercise it on
the test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare for new backup APIs by describing the XML that will represent
a backup. The XML resembles snapshots and checkpoints in being able
to select actions for a set of disks, but has other differences. It
can support both push model (the hypervisor does the backup directly
into the destination file) and pull model (the hypervisor exposes an
access port for a third party to grab what is necessary). Add
testsuite coverage for some minimal uses of the XML.
The <disk> element within <domainbackup> tries to model the same
elements as a <disk> under <domain>, but sharing the RNG grammar
proved to be hairy. That is in part because while <domain> use
<source> to describe a host resource in use by the guest, a backup job
is using a host resource that is not visible to the guest: a push
backup action is instead describing a <target> (which ultimately could
be a remote network resource, but for simplicity the RNG just
validates a local file for now), and a pull backup action is instead
describing a temporary local file <scratch> (which probably should not
be a remote resource). A future refactoring may thus introduce some
way to parameterize RNG to accept <disk type='FOO'>...</disk> so that
the name of the subelement can be <source> for domain, or <target> or
<scratch> as needed for backups. Future patches may improve this area
of code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Old GCC isn't happy about the {0} initializer because the first
field in the struct is itself a struct.
../../tests/openvzutilstest.c: In function 'testReadNetworkConf':
../../tests/openvzutilstest.c:101:12: error: missing braces around initializer [-Werror=missing-braces]
struct openvz_driver driver = {0};
^
This fixes commit 4a4132b462
Signed-off-by: Daniel Berrange <berrange@localhost.localdomain>
Avoid grabbing the whole virCapsPtr object when we only need the
host CPU information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Annoyingly there was no existing constructor, and identifying all the
places which do a VIR_ALLOC(cpu) is a bit error prone. Hopefully this
has found & converted them all.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
NUMA information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NUMA cells are stored directly in the virCapsHostPtr
struct. This moves them into their own struct allowing
them to be stored independantly of the rest of the host
capabilities. The change is used as an excuse to switch
the representation to use a GPtrArray too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU impl of the callback can directly use the QEMU capabilities
cache to resolve the emulator binary name, allowing virCapsPtr to be
dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr to get the default security model,
pass this in via the parser config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the disk and chardev seclabels are validated immediately at
the time their data is parsed. This forces the parser to fill in the
top level secmodel at time of parsing which is an undesirable thing.
This validation conceptually should be done in the post-parse phase
instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To enable the virCapsPtr parameter to the post parse method to be
eliminated, the drivers must fetch the virCapsPtr from their own
driver via the opaque parameter, or use an alternative approach
to validate the parsed data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virQEMUCapsPtr objects are just empty. Future patches are
going to expect them to contain real data. Start off by populating the
machine types and arch information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.
In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The script needs two files to open:
$(builddir)/test_file_access.txt, and
$(srcdir)/file_access_whitelist.txt.
However, the script is opening the files from the $CWD which
won't work for a VPATH build. Make the script accept paths to the
files through @ARGV and tune the Makefile.am to pass them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the test-wrap-argv.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
python2 will be end of life by the time of the next
libvirt release. All our supported build targets, including
CentOS7, have a python3 build available.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If we static link to libvirt_util.la then we can't override functions in
this file by simply implementing them in the test code. Any tests should
dynamic link to the main libvirt.la and ensure symbols are exported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The hard dependancy between the virt drivers and the network
or storage drivers was removed quite a while back now, so
the tests no longer need to link to these drivers.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 32-bit x86 binary is called qemu-system-i386, not
qemu-system-i686. This mistake across many test XML files was
not noticed because the mistake was also made in testutilsqemu.c
when mocking the capabilities.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On Fedora 31 with GCC 9.2.1, compiling qemuxml2argvtest takes
about 36 seconds since
commit 30c6d99209
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu Oct 24 17:51:42 2019 +0200
qemuxml2argvtest: Update host arch for DO_TEST*ARCH* tests
The optimizer is hitting some pathological performance behaviour due to
the high number of branches in the mymain() method.
Pushing the branch tests down into the testCompareXMLToArgv method
brings the compile time down to 3 seconds.
This likely related to this GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58479
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To better track jobs we couldn't parse let's introduce a new job type
which will clarify semantics internally in few places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This is needed if we want to call the function when the
virDomainNetDef* we have is a const.
Since virDomainNetGetActualVlan returns a pointer to memory that is
within the virDomainNetDefPtr arg, the returned pointer must also be
made const. This leads to a cascade of other virNetDevVlanPtr's that
must be changed to "const virNetDevVlan *".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
On s390 machines host-passthrough and host-model CPUs result in the same
guest ABI (with QEMU new enough to be able to tell us what "host" CPU is
expanded to, which was implemented around 2.9.0). So instead of using
host-passthrough CPU when there's no CPU specified in a domain XML we
can safely use host-model and benefit from CPU compatibility checks
during migration, snapshot restore and similar operations.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most likely for historical reasons our CPU def formatting code is
happily adding useless <model fallback='allow'/> for host-model CPUs. We
can just drop it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case for x86_64 and neither cirrus nor vga capability is of the
xml2argv type because it actually fails to parse the XML at all [*] which
is something that xml2xml tests don't seem to handle. xml2argv test fails
to produce a qemu argv for this case which xml2argv tests can handle.
[*] This is a consequence of the decision not to have a fallback if the
obvious choices (cirrus and vga) aren't viable due to missing QEMU caps.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
The test relied implicitly on default video device being cirrus. As we're
about to change that the test would start failing. To avoid this, just make
the test's requirement explicit.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
Now that all pieces are in place (hopefully) let's enable -blockdev.
We base the capability on presence of the fix for 'auto-read-only' on
files so that blockdev works properly, mandate that qemu supports
explicit SCSI id strings to avoid ABI regression and that the fix for
'savevm' is present so that internal snapshots work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'savevm' HMP command didn't work properly with blockdev as it tried
to do snapshot of everything including the protocol nodes accessing
files which are not snapshottable. Qemu fixed this bug so now we need to
detect it to allow enabling blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Initial implementation of 'auto-read-only' didn't reopen the backing
files when needed. For '-blockdev' to work we need to be able to tel
qemu to open a file read-only and change it during blockjobs as we label
backing chains with a sVirt label which does not allow writing. The
dynamic auto-read-only supports this as it reopens files when writing
is demanded.
Add a capability to detect that the posix file based backends support
the dynamic part.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The data is captured from qemu v4.2.0-rc2-19-g2061735ff0
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemu driver will obey <backingStore> when we support blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Adding build time self tests for basic (deprecated), doorbell and plain mode.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
When starting a domain without a CPU model specified in the domain XML,
QEMU will choose a default one. Which is fine unless the domain gets
migrated to another host because libvirt doesn't perform any CPU ABI
checks and the virtual CPU provided by QEMU on the destination host can
differ from the one on the source host.
With QEMU 4.2.0 we can probe for the default CPU model used by QEMU for
a particular machine type and store it in the domain XML. This way the
chosen CPU model is more visible to users and libvirt will make sure
the guest will see the exact same CPU after migration.
Architecture specific notes
- aarch64: We only set the default CPU for TCG domains as KVM requires
explicit "-cpu host" to work.
- ppc64: The default CPU for KVM is "host" thanks to some hacks in QEMU,
we will translate the default model to the model corresponding to the
host CPU ("POWER8" on a Power8 host, "POWER9" on Power9 host, etc.).
This is not a problem as the corresponding CPU model is in fact an
alias for "host". This is probably not ideal, but it's not wrong and
the default virtual CPU configured by libvirt is the same QEMU would
use. TCG uses various CPU models depending on machine type and its
version.
- s390x: The default CPU for KVM is "host" while TCG defaults to "qemu".
- x86_64: The default CPU model (qemu64) is not runnable on any host
with KVM, but QEMU just disables unavailable features and starts
happily.
https://bugzilla.redhat.com/show_bug.cgi?id=1598151https://bugzilla.redhat.com/show_bug.cgi?id=1598162
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU 4.2.0 will report default CPU types used by each machine type and
we will want to start using it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Almost all TCG query-machines replies match KVM. The only exceptions are
4.2.0 replies on s390x which differ in the reported default CPU type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some specifics of machine types may depend on the accelerator and thus
the data should be moved to virQEMUCapsAccel. The TCG machine types are
just copied from the ones probed for KVM to simplify the changes to
qemucapabilitiestest data files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for making machine types dependent on the accelerator,
the <machine> elements are formatted between <cpu type='kvm'> and
<cpu type='tcg'>.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is a tiny wrapper around virQEMUCapsProbeQMPCPUDefinitions which will
soon get private parameters and thus it cannot be exposed outside
qemu_capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new functions are designed to load and format capabilities which
depend on the accelerator (host CPU expansion and CPU models).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to create a mapping between CPU model names and their
corresponding QOM types.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The functions return virDomainCapsCPUModelsPtr and thus they should be
called *CPUModels for consistency. Functions called *CPUDefinitions will
work on qemuMonitorCPUDefsPtr.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While virDomainCapsCPUModel structure contains 'usable' field with
virDomainCapsCPUUsable type, the lower level structure specific to QEMU
driver used virTriStateBool for the same thing and we had to translate
between them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's store qemuMonitorCPUDefInfo directly in the array of CPUs in
qemuMonitorCPUDefs rather then using an array of pointers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is a container for a CPU models list (qemuMonitorCPUDefInfo) and a
number of elements in this list.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some callers of virQEMUCapsGetCPUDefinitions will need to filter the
returned list of CPU models. Let's add the filtering parameters directly
to virQEMUCapsGetCPUDefinitions to avoid copying the CPU models list
twice.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than returning a direct pointer the list stored in qemuCaps the
function now creates a new copy of the CPU models list.
The main purpose of this seemingly useless change is to update callers
to free the result returned by virQEMUCapsGetCPUDefinitions because the
internals of this function will change significantly in the following
patches.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generated with "spapr/kvm: Set default cpu model for all machine
classes" fix for QEMU applied.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We replaced them by use of transaction to simplify possible failure
scenarios.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
testSchemaDir is a helper which invokes the schema test using virTestRun
on all schema files. Since the function itself is not called inside
virTestRun any helper function call is not dispatched to the user and
thus it's hard to debug the test. Propagate errors from the directory
traversal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In cases when we call a libvirt helper which reports an error the error
would be hidden unless libvirt library debug is on. This produces a lot
of output and is hard to debug.
The helper provides a way to dispatch the libvirt error in specific
cases sice we do already dispatch it in case when virTestRun is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor various functions to avoid multiple freeing function calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This flag is not implied by g_mkstemp_full, only by g_mkstemp.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Bjoern Walk <bwalk@linux.ibm.com>
Fixes: 4ac4773040
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Glib implementation follows the ISO C99 standard so it's safe to replace
the gnulib implementation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We need to mock virCgroupV2DevicesAvailable() in order to remove any
dependency on kernel as BPF devices might not be available.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some of our tests try to validate domain XMLs they are working
with (not intentionally, simply because they call top level
domain XML parse function). Anyway, this implies that we build
domain capabilities also - see
virQEMUDriverGetDomainCapabilities(). And since some domain XMLs
are type of 'kvm' the control gets through
virQEMUCapsFillDomainCaps() and virHostCPUGetKVMMaxVCPUs() to
opening /dev/kvm which may be missing on the machine we're
running 'make check'.
Previously, we did not see this issue, because it was masked. If
building domain capabilities failed for whatever reason, we
ignored the failure. Only v5.9.0-207-gc69e6edea3 uncovered the
problem (it changed reval from 0 to -1 if
virQEMUDriverGetDomainCapabilities() fails). Since the referenced
commit is correct, we need to mock access to /dev/kvm in our
tests.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.
This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.
One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').
Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds, this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With g_mkstemp_full, there is no need to distinguish between
mkostemp and mkostemps (no suffix vs. a suffix of a fixed length),
because the GLib function looks for the XXXXXX pattern everywhere
in the string.
Use S_IRUSR | S_IWUSR for the permissions and do not pass O_RDWR
in flags since it's implied.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'ramfb' attribute provides a framebuffer to the guest that can be
used as a boot display for the vgpu
For example, the following configuration can be used to provide a vgpu
with a boot display:
<hostdev mode='subsystem' type='mdev' model='vfio-pci' display='on' ramfb='on'>
<source>
<address uuid='$UUID'/>
</source>
</hostdev>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
In a follow-up commit, we will use the domain capabilities to validate
video device configurations, which means that we also need to make sure
that the domain capabilities include the "none" video device.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
commit 9bfcf0f62d added the
QEMU_CAPS_DEVICE_RAMFB capability but did not set the domain capability.
This patch sets the domain capability for the ramfb device and updates
the tests.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Several tests were not specifying the necessary qemu capabilities for
what they were testing. Due to the way that the video devices are
currently validated, this is not causing any problems. But a change to
video device validation in a following patch would have exposed this
issue and resulted in multiple test failures about the domain
configuration not supporting particular video models.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
qemu_hotplugpriv.h is a header file created to share a global variable
called 'qemuDomainRemoveDeviceWaitTime', declared in qemu_hotplug.c,
to other files that would want to change the timeout value
(currently, only tests/qemuhotplugtest.c).
Previous patch deprecated the variable, using qemu_driver->unplugTimeout
to set the timeout instead. This means that the header file is now
unused, and can be safely discarded.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For some architectures and setups, device removal can take
longer than the default 5 seconds. This results in commands
such as 'virsh setvcpus' to fire timeout messages even if
the operation were successful in the guest, confusing the
user.
This patch sets a new 10 seconds unplug timeout for PPC64
guests. All other archs will keep the default 5 seconds
timeout.
Instead of putting 'if PPC64' conditionals inside qemu_hotplug.c
to set the new timeout value, a new function called
qemuDomainGetUnplugTimeout was added. The timeout value is then
retrieved when needed, by passing the correspondent DomainDef
object. This approach allows for different guest architectures
to have distint unplug timeout intervals, regardless of the
host architecture. This design also makes it easier to
modify/enhance the unplug timeout logic in the future
(allow for special timeouts for TCG domains, for example).
A new mock file was created to work with qemuhotplugtest.c,
given that the test timeout is significantly shorter than
the actual timeout value in qemu_hotplug.c.
The now unused 'qemuDomainRemoveDeviceWaitTime' global can't
be simply erased from qemu_hotplug.c though. Next patch will
remove it properly.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the need to pass around strings and switch to the enum values
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities are declared in the XML schema so passing feature names
as strings from hypervisor drivers makes no sense.
Additionally some of the features expose so called 'toggles' while
others not. This knowledge was encoded by a bunch of 'STREQ's in the
formatter.
Change all of this by declaring the features as an enum and use it
instead of a dynamically allocated array.
Presence of 'toggles' is encoded together with the conversion strings
rather than in the formatter directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The pconfig feature was enabled in QEMU by accident in 3.1.0. All other
newer versions do not support it and it was removed from the
Icelake-Server CPU model in QEMU.
We don't normally change our CPU models even when QEMU does so to avoid
breaking migrations between different versions of libvirt. But we can
safely do so in this specific case. QEMU never supported enabling
pconfig so any domain which was able to start has pconfig disabled.
With a small compatibility hack which explicitly disables pconfig when
CPU model equals Icelake-Server in migratable domain definition, only
one migration scenario stays broken (and there's nothing we can do about
it): from any host to a host with libvirt < 5.10.0 and QEMU > 3.1.0.
https://bugzilla.redhat.com/show_bug.cgi?id=1749672
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When a CPU definition wants to explicitly disable some features that are
unknown to QEMU, we can safely drop them from the definition before
starting QEMU. Naturally QEMU won't enable such features implicitly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since we are not passing the @fakerootdir variable to any inline function
anymore, we can make the variable static.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since 6a077cf2b3 domaincapstest does not run through all cases on
failure but terminates right away. This makes it super annoying to debug
or use in combination with VIR_TEST_REGENERATE_OUTPUT.
Fix it by remembering failure and still running through all cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There should be a single space either side of operators. Inline
comments should have two spaces before the '#'
src/hyperv/hyperv_wmi_generator.py:130:45: E261 at least two spaces before inline comment
source += ' { "", "", 0 },\n' # null terminated
^
src/esx/esx_vi_generator.py:417:25: E221 multiple spaces before operator
FEATURE__DESERIALIZE = (1 << 6)
^
tests/cputestdata/cpu-cpuid.py:187:78: E225 missing whitespace around operator
f.write(" <msr index='0x%x' edx='0x%08x' eax='0x%08x'/>\n" %(
^
docs/apibuild.py:524:47: E226 missing whitespace around arithmetic operator
self.line = line[i+2:]
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Coding style expects 1 blank line between each method and 2 blank lines
before each class.
docs/apibuild.py:171:5: E303 too many blank lines (2)
def set_header(self, header):
^
docs/apibuild.py:230:1: E302 expected 2 blank lines, found 1
class index:
^
docs/apibuild.py:175:5: E301 expected 1 blank line, found 0
def set_module(self, module):
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This affects more than src/Makefile.am as the rule to generate source
files for protocols is generic for all sub-directories.
Affected files are:
src/admin/admin_protocol.{h,c}
src/locking/lock_protocol.{h,c}
src/logging/log_protocol.{h,c}
src/lxc/lxc_monitor_protocol.{h,c}
src/remote/{lxc,qemu,remote}_protocol.{h,c}
src/rpc/{virkeepalive,virnet}protocol.{h,c}
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The ARM implementation of query-cpu-model-expansion only
supports full expansion, so we have to make sure we're using
that expansion mode if we want to obtain any useful data.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mirrors the existing QEMU_CAPS_X86_MAX_CPU.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately this results in a lot of churn because of the eigth
hundred and change QEMU commits since the file was last touched,
but the only part we actually care about is the fact that the
query-cpu-model-expansion QMP command is now available on aarch64.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's possible that virBitmapNewString returns NULL with an error
string (and not an allocation failure that would abort); however, if
virBitmapToString is called with a NULL @bitmap, then it will fail
in an ugly manner. So rather than have if (!map && !str) logic, split
the checks for each variable.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 1c8113f9c added the call to virTypedParamsGetString without
a return value check which caused Coverity to complain especially
since other checks for the same function are made.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The @ifname is listed as an ATTRIBUTE_NONNULL(1) parameter, so
checking for _NULLABLE causes a coverity build failure - remove
that and if it's NULL for the test let's fail miserably.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 944a35d7f0 added @fakerootdir; however, there are multiple
paths out of mymain that didn't free the memory - so just use the
g_autofree to resolve the potential leak.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
rfc3986 uses uppercase characters so switch to using them as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to rfc3986:
2.3. Unreserved Characters
Characters that are allowed in a URI but do not have a reserved
purpose are called unreserved. These include uppercase and lowercase
letters, decimal digits, hyphen, period, underscore, and tilde.
unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
URIs that differ in the replacement of an unreserved character with
its corresponding percent-encoded US-ASCII octet are equivalent: they
identify the same resource. However, URI comparison implementations
do not always perform normalization prior to comparison (see Section
6). For consistency, percent-encoded octets in the ranges of ALPHA
(%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period (%2E),
underscore (%5F), or tilde (%7E) should not be created by URI
producers and, when found in a URI, should be decoded to their
corresponding unreserved characters by URI normalizers.
Thus we must not include few other characters which don't match
c_isalpha to conform to the rules.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the conversion of all callers that would pass true as @dynamic to
a different function we can remove the unused argument now.
Additionally modify the return type to 'size_t' as indentation can't be
negative and remove checks whether @buf is passed as it's caller's duty
to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function basically does two very distinct things depending on a
bool. As a first step of conversion split out the case when @dynamic is
true and implement it as a new function and convert all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The DO_TEST macro initializes 'struct testInfo' but it's not used by any
of the tests. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tests are deeply based on internals of virBuffer which will be
replaced in an upcoming patch with glib's GString. Remove the tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than setting usage error truncate the indentation level. Having
the output string misformated is way more useful to figure out where the
error lies rather than reporting an error after a giant formatter
function.
In testBufAutoIndent we now validate that the indentation is truncated
and testBufAddBuffer2 is removed since it became bogus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Usage errors in the virBuffer are hard to track anyways. Just trim
noting if the user requests the trimming string to be used without
providing it.
The change in the test proves that it's a no-op now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuMonitorTransactionBitmapMergeSourceAddBitmap which adds
the appropriate entry into a virJSONValue array to be used with
qemuMonitorTransactionBitmapMerge. Bitmap merging supports two possible
formats and this new helper implements the more universal one specifying
also the source node name.
In addition use the new helper in the testQemuMonitorJSONTransaction
test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the only data we need for fully testing a QEMU binary is
the (version, arch) combo, we can stop providing that information
ourselves and instead rely on testQemuCapsIterate() automatically
picking up new input files as they are added to the repository,
the same way the qemucapabilities and qemucaps2xml tests already
behave.
Unsurprisingly, this change results in a bunch of extra output
files being created, significantly expanding our test coverage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
For each QEMU version there are usually several different,
architecture-dependedn scenarios that we're interested in testing;
however, since the test matrix has to be explicitly created by
calling DO_TEST_QEMU() multiple times with different arguments, we
end up with spotty coverage.
Fix this by implementing the arch-specific rules in code, which
result in the full coverage for a (version, arch) combo being
automatically achieved with a single call to DO_TEST_QEMU().
Unsurprisingly, this change results in a bunch of extra output
files being created.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The full name of the test case, as well as the name of the QEMU
binary and corresponding capabilities file, can all be derived
from other information passed to the test, so there's no point in
asking the user to provide them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Macros become less and less appealing the more work you perform
inside them: DO_TEST_QEMU() has arguably already crossed that
threshold, and we're going to add even more code later on.
While factoring the code out of the macro, convert it to use the
GLib string manipulation functions and take advantage of autofree.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Requiring the user to provide the final string themselves will
make subsequent changes easier to implement.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The usual convention is to use ${foo}test.c for the test program
itself and either ${foo}data/ or ${foo}outdata/, depending on
whether it contains both input and output files or only the latter,
for the corresponding data directory.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Right now we're passing a "base" string that contains both,
separated by an underscore. Some changes that we're going to
introduce later will require us to have the version number on its
own, and instead of delegating the task of splitting the two apart
to the callback it make more sense to perform it upfront.
This change results in quite a bit of churn because we're now
using the version number only, without the prefix, to calculate
the dummy microcodeVersion.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Right now users need to hardcode the suffix, which is not a big
deal since they're the ones who passed it to testQemuCapsIterate()
in the first place; however, since we're already passing most of
the information to the callback and we're going to add more later
on, it makes sense to be consistent and pass the suffix too.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Right now users need to know input file live inside
TEST_QEMU_CAPS_PATH, which is bad layering.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We're going to depend on the fact that the suffix starts with a
dot later on, so we better ensure that it does.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If files whose name doesn't follow the expected format are added
to the repository, it's better to make the test suite fail than to
silently ignore them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All OSes that we support have libselinux >= 2.5 except for Ubuntu 16.04
where the version is 2.4.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function does not do anything that could fail. Remove the return
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuDomainPrepareDiskSourceData historically prepared everything but
we've split out the majority of the functionality so that it sets up
predominately only according to the configuration of the disk. There
was one leftover bit of setting the gluster debug level from the config.
Split this out into a separate function so that
qemuDomainPrepareDiskSourceData only prepares based on the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ACKed-by: Eric Blake <eblake@redhat.com>
We don't allow such config in the schema but the code can handle that so
add a test case supporting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The disk type is not part of source and thus it's parsed earlier. This
bypasses the checks when parsing a disk type='network' if it's
completely missing the source.
Since there are possible active users of this (it was reported as a
problem with openstack) fix it by resetting the disk type to '_FILE' for
an empty cdrom which is handled correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace:
if (!s && VIR_STRDUP(s, str) < 0)
goto;
with:
if (!s)
s = g_strdup(str);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All the callers of these functions only check for a negative
return value.
However, virNetDevOpenvswitchGetVhostuserIfname is documented
as returning 1 for openvswitch interfaces so preserve that.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP_QUIET(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While the default iptables setup used by Fedora/RHEL distros
only restricts traffic on the INPUT and/or FORWARD rules,
some users might have custom firewalls that restrict the
OUTPUT rules too.
These can prevent DHCP/DNS/TFTP responses from dnsmasq
from reaching the guest VMs. We should thus whitelist
these protocols in the OUTPUT chain, as well as the
INPUT chain.
Signed-off-by: Malina Salina <malina.salina@protonmail.com>
Initial patch then modified to add unit tests and IPv6
support
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the removal of support for log message stack traces, there is
nothing using the logging filter/output flags and they can be removed.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The log filters have supported the use of a "+" before the source match
string to request that a stack trace be emitted for every log message:
commit 548563956e
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed May 9 15:18:56 2012 +0100
Allow stack traces to be included with log messages
Sometimes it is useful to see the callpath for log messages.
This change enhances the log filter syntax so that stack traces
can be show by setting '1:+NAME' instead of '1:NAME'.
With the huge & ever increasing number of logging statements per file,
this will be incredibly verbose and have a major performance penalty.
This makes the feature impractical to use widely and as such it is not
worth the code maint cost.
Removing this seldom used feature allows us to drop the 'execinfo'
module in gnulib which provides the backtrace() function which doesn't
exist on non-Linux.
Users who want to get stack traces of parts of libvirt can use GDB,
or systemtap for live tracing with minimal perf impact.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This commit let QEMU command line define 'xres' and 'yres' properties
if XML contains both properties from video model: based on resolution
fields 'x' and 'y'. There is a conditional structure inside
qemuDomainDeviceDefValidateVideo() that validates if video model
supports this feature. This commit includes the necessary changes to
cover resolution for 'video-qxl-resolution' test cases too.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:
<model ...>
<resolution x='800' y='600'/>
</model>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Now that we no longer use any of the macros from this file, remove it.
This also removes a typo.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that all the types using VIR_AUTOUNREF have a cleanup func defined
to virObjectUnref, use g_autoptr instead of VIR_AUTOUNREF.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all uses of VIR_DEFINE_AUTOPTR_FUNC
with G_DEFINE_AUTOPTR_CLEANUP_FUNC in preparation for replacing the
rest.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOCLEAN is just an alias for g_auto. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prefer G_GNUC_NULL_TERMINATED which was introduced in GLib 2.8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove all usage of ATTRIBUTE_NORETURN in favor of GLib's
G_GNUC_NORETURN.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In upcoming commits, virSecurityManagerSetAllLabel() will perform
rollback in case of failure by calling
virSecurityManagerRestoreAllLabel(). But in order to do that, the
former needs to have @migrated argument so that it can be passed
to the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.
The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_strerror is offers the safety/correctness benefits of strerror_r, with
the API design convenience of strerror.
Use of virStrerror should be eliminated through the codebase in favour
of g_strerror.
commandhelper.c is a special case as its a tiny single threaded test
program, not linked to glib, so it just uses traditional strerror().
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Converting from virObject to GObject is reasonably straightforward,
as illustrated by this patch for virIdentity
In the header file
- Remove
typedef struct _virIdentity virIdentity
- Add
#define VIR_TYPE_IDENTITY virIdentity_get_type ()
G_DECLARE_FINAL_TYPE (virIdentity, vir_identity, VIR, IDENTITY, GObject);
Which provides the typedef we just removed, and class
declaration boilerplate and various other constants/macros.
In the source file
- Change 'virObject parent' to 'GObject parent' in the struct
- Remove the virClass variable and its initializing call
- Add
G_DEFINE_TYPE(virIdentity, vir_identity, G_TYPE_OBJECT)
which declares the instance & class constructor functions
- Add an impl of the instance & class constructors
wiring up the finalize method to point to our dispose impl
In all files
- Replace VIR_AUTOUNREF(virIdentityPtr) with g_autoptr(virIdentity)
- Replace virObjectRef/Unref with g_object_ref/unref. Note
the latter functions do *NOT* accept a NULL object where as
libvirt's do. If you replace g_object_unref with g_clear_object
it is NULL safe, but also clears the pointer.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To simplify the later conversion from virObject to GObject, introduce
the use of g_autoptr to the virIdentity implementnation and test suite.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using the standard macro will facilitate the conversion to glib's
auto cleanup macros.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the main glib.h to internal.h so that all common code can use it.
Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.
This was feature was dropped in 2.46.0 with:
commit 3be6ed60aa58095691bd697344765e715a327fc1
Author: Alexander Larsson <alexl@redhat.com>
Date: Sat Jun 27 18:38:42 2015 +0200
Deprecate and drop support for memory vtables
Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in
commit 1f24b36607bf708f037396014b2cdbc08d67b275
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Sep 5 14:37:54 2019 +0100
gmem: clarify that g_malloc always uses the system allocator
Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.
This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.
This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.
Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This isn't exactly equivalent setting (acpi_firmware may point to
non-SLIC ACPI table), but it's the most behavior preserving option.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
The object locking test code is not run by any CI tests and has
bitrotted to the point where it isn't worth the effort to try to
fix it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Linux kernel 5.1 added a new PPC KVM capability named
KVM_PPC_CPU_CHAR_BCCTR_FLUSH_ASSIST, which is exposed to the QEMU guest
since QEMU commit 8ff43ee404d under a new sPAPR capability called
SPAPR_CAP_CCF_ASSIST. This cap indicates whether the processor supports
hardware acceleration for the count cache flush workaround, which
is a software workaround that flushes the count cache on context
switch. If the processor has this hardware acceleration, the software
flush can be shortened, resulting in performance gain.
This hardware acceleration is defaulted to 'off' in QEMU. The reason
is that earlier versions of the Power 9 processor didn't support
it (it is available on Power 9 DD2.3 and newer), and defaulting this
option to 'on' would break migration compatibility between the Power 9
processor class.
However, the user running a P9 DD2.3+ hypervisor might want to create
guests with ccf-assist=on, accepting the downside of only being able
to migrate them only between other P9 DD2.3+ hosts running upstream
kernel 5.1+, to get a performance boost.
This patch adds this new capability to Libvirt, with the name of
QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.
https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Add a qemu capbility to see if the standalone ramfb device is available.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
When connecting to qemu's monitor the @vm object is unlocked.
This is justified - connecting may take a long time and we don't
want to wait with the domain object locked. However, just before
the domain object is locked again, the monitor's FD is registered
in the event loop. Therefore, there is a small window where the
event loop has a chance to call a handler for an event that
occurred on the monitor FD but vm is not initalized properly just
yet (i.e. priv->mon is not set). For instance, if there's an
incoming migration, qemu creates its socket but then fails to
initialize (for various reasons, I'm reproducing this by using
hugepages but leaving the HP pool empty) then the following may
happen:
1) qemuConnectMonitor() unlocks @vm
2) qemuMonitorOpen() connects to the monitor socket and by
calling qemuMonitorOpenInternal() which subsequently calls
qemuMonitorRegister() the event handler is installed
3) qemu fails to initialize and exit()-s, which closes the
monitor
4) The even loop sees EOF on the monitor and the control gets to
qemuProcessEventHandler() which locks @vm and calls
processMonitorEOFEvent() which then calls
qemuMonitorLastError(priv->mon). But priv->mon is not set just
yet.
5) qemuMonitorLastError() dereferences NULL pointer
The solution is to unlock the domain object for a shorter time
and most importantly, register event handler with domain object
locked so that any possible event processing is done only after
@vm's private data was properly initialized.
This issue is also mentioned in v4.2.0-99-ga5a777a8ba.
Since we are unlocking @vm and locking it back, another thread
might have destroyed the domain meanwhile. Therefore we have to
check if domain is still active, and we have to do it at the
same place where domain lock is acquired back, i.e. in
qemuMonitorOpen(). This creates a small problem for our test
suite which calls qemuMonitorOpen() directly and passes @vm which
has no definition. This makes virDomainObjIsActive() call crash.
Fortunately, allocating empty domain definition is sufficient.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU 2.11 for ppc64 changed all CPU model names to lower case. Since
libvirt can't change the model names for compatibility reasons, we need
to translate the matching lower case models to the names known by
libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit fb973cfbb4 added versioned test outputs for the above mentioned
tests but didn't actually enable them. Fix that mistake and fix the
output of the tsc-frequency test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test data was modernized to use actual caps but commit 4dadcaa98e
forgot to delete this test data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser.
The argv generator tests are provided by:
machine-aeskeywrap-on-caps
machine-aeskeywrap-on-cap
machine-aeskeywrap-off-caps
machine-aeskeywrap-off-cap
machine-deakeywrap-on-caps
machine-deakeywrap-on-cap
machine-deakeywrap-off-caps
machine-deakeywrap-off-cap
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser. The same functionality is tested by many tests for
pseries guests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser. The same functionality is tested by
'serial-pty-chardev'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The mktempd module in gnulib provides an equivalent to 'mktemp -d' on
platforms which lack this shell command. All platforms on which libvirt
runs the affected tests have 'mktemp -d' support, so the gnulib module
is not required.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
086c19d69 added bochs-display capability but didn't fill in the info for
domain capabilities.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability enables comparison of CPU models via QMP.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Message-Id: <1568924706-2311-13-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This capability enables baselining of CPU models via QMP.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Message-Id: <1568924706-2311-9-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Some older s390 CPU models (e.g. z900) will not report props as a
response from query-cpu-model-expansion. As such, we should make the
props field optional when parsing the return data from the QMP response.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <1568924706-2311-6-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When expanding a CPU model via query-cpu-model-expansion, any features
that were a part of the original model are discarded. For exmaple,
when expanding modelA with features f1, f2, a full expansion may reveal
feature f3, but the expanded model will not include f1 or f2.
Let's pass a virCPUDefPtr to the expansion function in preparation for
taking features into consideration.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <1568924706-2311-4-git-send-email-walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The way in which the qemu driver generates aliases for disks involves
ignoring the partition number part of a target dev name. This means that
all partitions of a block device and the device itself all end up with the
same alias. If multiple such disks are specified in XML, the resulting
name clash makes qemu invocation fail.
Since attaching partitions to qemu VMs doesn't seem to make much sense
anyway, disallow partitions in target specifications altogether.
https://bugzilla.redhat.com/show_bug.cgi?id=1346265
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Consider having a nc binary in the path with a space in its name,
for example '/tmp/fo o/nc'
This results in libvirt running SSH with the following arg value
"'if ''/tmp/fo o/nc'' -q 2>&1 | grep \"requires
an argument\" >/dev/null 2>&1; then ARG=-q0;
else ARG=;fi;''/tmp/fo o/nc'' $ARG -U
/var/run/libvirt/libvirt-sock'"
The use of the single quote escaping was introduced by
commit 6ac6238de3
Author: Guido Günther <agx@sigxcpu.org>
Date: Thu Oct 13 21:49:01 2011 +0200
Use virBufferEscapeShell in virNetSocketNewConnectSSH
to escape the netcat command since it's passed to the shell. Adjust
expected test case output accordingly.
While the intention of this change was good, the result is broken as it
is still underquoted.
On the SSH server side, SSH itself runs the command via the shell.
Our command is then invoking the shell again. Thus we see
$ virsh -c qemu+ssh://root@domokun/system?netcat=%2Ftmp%2Ffo%20o%2Fnc list
error: failed to connect to the hypervisor
error: End of file while reading data: sh: /tmp/fo: No such file or directory: Input/output error
With the second level of escaping added we can now successfully use a nc
binary with a space in the path.
The original test case added was misleading as it illustrated using a
binary path of 'nc -4' which is not a path, it is a command with a
separate argument, which is getting interpreted as a path.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The video private data was not initializing the vhostuser FD
causing us to attempt to close FD 0 many times over.
Fixes
commit ca60ecfa8c
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Mon Sep 23 14:44:36 2019 +0400
qemu: add qemuDomainVideoPrivate
Since the test suite does not invoke qemuExtDevicesStart(), no
vhost_user_fd will be present when generating test XML. To deal
with this we can must a fake FD number. While the current XML
is using FD == 0, we pick a very interesting number that's unlikely
to be a real FD, so that we're more likely to see any mistakes
closing the invalid FD.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
