This is a variant of Haswell-noTSX with indirect branch prediction
protection. The only difference between Haswell-noTSX and
Haswell-noTSX-IBRS is the added "spec-ctrl" feature.
The Haswell-noTSX-IBRS model in QEMU is a bit different since
Haswell-noTSX got several additional features since we added it in
cpu_map.xml:
arat, abm, f16c, rdrand, vme, xsaveopt
Adding them only to the -IBRS variant would confuse our CPU detection
code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of IvyBridge with indirect branch prediction
protection. The only difference between IvyBridge and IvyBridge-IBRS is
the added "spec-ctrl" feature.
The IvyBridge-IBRS model in QEMU is a bit different since IvyBridge got
several additional features since we added it in cpu_map.xml:
arat, vme, xsaveopt
Adding them only to the -IBRS variant would confuse our CPU detection
code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of SandyBridge with indirect branch prediction
protection. The only difference between SandyBridge and SandyBridge-IBRS
is the added "spec-ctrl" feature.
The SandyBridge-IBRS model in QEMU is a bit different since SandyBridge
got several additional features since we added it in cpu_map.xml:
arat, vme, xsaveopt
Adding them only to the -IBRS variant would confuse our CPU detection
code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of Westmere with indirect branch prediction
protection. The only difference between Westmere and Westmere-IBRS is
the added "spec-ctrl" feature.
The Westmere-IBRS model in QEMU is a bit different since Westmere got
several additional features since we added it in cpu_map.xml:
arat, pclmuldq, vme
Adding them only to the -IBRS variant would confuse our CPU detection
code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of Nehalem with indirect branch prediction protection.
The only difference between Nehalem and Nehalem-IBRS is the added
"spec-ctrl" feature.
Thus the diff matches QEMU, but the new CPU model itself is different.
The QEMU's versions of both models contain "vme" feature, while this
feature is missing in libvirt's models. While we can't change the
existing Nehalem CPU model, we could add "vme" to Nehalem-IBRS to make
it similar to QEMU, but doing so would fool our CPU detecting code so
that any Nehalem CPU with "vme" feature would be detected as
Nehalem-IBRS CPU without spec-ctrl. Not adding "vme" to Nehalem-IBRS is
safe as QEMU will just provide the feature anyway, which matches what
happens with Nehalem (and new enough machine types).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The CPU contains the updated microcode for CVE-2017-5715.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The CPU contains the updated microcode for CVE-2017-5715.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The CPU contains the updated microcode for CVE-2017-5715.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The CPU contains the updated microcode for CVE-2017-5715.
The *-guest.xml and *-json.xml CPU definitions use Skylake-Client CPU
model rather than Broadwell. This is similar to Xeon-E5-2650-v4 and it
is caused by our CPU model selection code when no model matches the CPU
signature (family + model). We'd need to maintain a complete list of CPU
signatures for our CPU models to fix this.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The CPU contains the updated microcode for CVE-2017-5715.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Added in QEMU commits TBD and TBD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
/usr/bin/qemu-system-x86_64 -S -no-user-config -nodefaults -nographic -machine none,accel=kvm:tcg -qmp unix:/var/lib/libvirt/qemu/capabilities.monitor.sock,server,nowait -pidfile /var/lib/libvirt/qemu/capabilities.pidfile -daemonize
libvirtd needs to be allowed to kill these processes, otherwise they
remain running.
Add a check if it's a iSCSI hostdev and if it's not then don't use the
union member 'iscsi'. The segmentation fault occured when accessing
secinfo->type, but this can vary from case to case.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Update the min fedora to 26. Use a macro to record the min versions so that the
later error message is always in sync with the earlier version check. Clarify
the comment that refers to guessing of dist which does not actually happen.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
RHEL-6 doesn't have bash-completion package by default, it has to be
installed from EPEL.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Similar to commit @f44ec9c1, commit @500cbc06 introduced a new nested
'mdev_types' capability, however the mentioned commit didn't adjust
virNodeDeviceNumOfCaps and virNodeDeviceListCaps functions accordingly
to provide proper support for this capability.
After applying this patch the following python snippet returns the
expected results:
import libvirt
conn = libvirt.openReadOnly('qemu:///system')
devs = conn.listAllDevices()
for dev in devs:
if 'mdev_types' in dev.listCaps():
print dev.name(),dev.numOfCaps(),dev.listCaps()
Signed-off-by: Dan Zheng <dzheng@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Apparently we can't assume that people run readline recent enough
to have rl_completion_quote_character (added in readline-5.0
released in 2011). However, we can't compile without it. So if
not present, disable readline.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The functions defined in these sources are referenced all over
the place, however, compiler only when building with readline.
Thus when building without it linker gets sad as it can't find
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When building without readline, this function does nothing but
return false. Without touching any of its arguments which
triggers a build error. Therefore, provide a stub that has
arguments marked as unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The current state of art is as follows:
1) vshReadlineOptionsGenerator() generate all possible --options
for given command, and then
2) vshReadlineOptionsPrune() clears out already provided ones
from the list.
Not only this brings needless memory complexity it is also not
trivial to get right. We can switch to easier approach: just
don't add already specified --options in the first step.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's add a test case for S390 with CPU frequency information available.
Test data is sampled from an IBM z13 system running kernel 4.14 on LPAR.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Let's also parse the available processor frequency information on S390
so that it can be utilized by virsh sysinfo:
# virsh sysinfo
<sysinfo type='smbios'>
...
<processor>
<entry name='family'>2964</entry>
<entry name='manufacturer'>IBM/S390</entry>
<entry name='version'>00</entry>
<entry name='max_speed'>5000</entry>
<entry name='serial_number'>145F07</entry>
</processor>
...
</sysinfo>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Installing nfs-common is broken on trusty since build #807https://travis-ci.org/libvirt/libvirt/builds/326705054
It's probably a transient error on Travis' side, so just comment
it out for the time being to allow builds to proceed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Make sure we install the same packages lcitool would install on
the CentOS CI so that we have consistent results. The package
list is current as of libvirt-jenkins-ci commit 3a559ae7bc08.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Qemu 2.11 allows case-insensitive specification of CPU models.
This patch fixes the resulting problems on (at least) POWER
arch machines so that Power8 and POWER8 are not different.
Signed-off-by: Scott Garfinkle <scottgar@linux.vnet.ibm.com>
Libvirt 3.7.0 and earlier libvirt reported a migration job as completed
immediately after QEMU finished sending migration data at which point
migration was not really complete yet. Commit v3.7.0-29-g3f2d6d829e
fixed this, but caused a regression in reporting statistics for
completed jobs which started reporting the job as still running. This
happened because the completed job statistics including the job status
are copied from the running job before we finally mark it as completed.
Let's make sure QEMU_DOMAIN_JOB_STATUS_COMPLETED is always set in the
completed job info even when the job has not finished yet.
https://bugzilla.redhat.com/show_bug.cgi?id=1523036
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When reconnecting to a running domain with host-model CPU started by old
libvirt which did not store the actual CPU in the status XML, we need to
ignore the fallback attribute to make sure we can translate the detected
host CPU model to a model which is supported by the running QEMU.
https://bugzilla.redhat.com/show_bug.cgi?id=1532980
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Due to the way that check logic was written we basically enabled
bash completion whenever readline was enabled. This is not right
because it made bash-completion pkg-config module required.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
For given domain fetch list of defined interfaces. This can be
used for commands like domif-getlink and others. If available,
the interface name is returned (e.g. "vnet0", usually available
only for running domains), if not the MAC address is returned.
Moreover, the detach-interface command requires only MAC address
and therefore we have new flag that forces the completer to
return just the MAC address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared let the fun begin. This
completer is very simple and returns domain names. Moreover,
depending on the command it can return just a subset of domains
(e.g. only running/paused/transient/.. ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The only purpose of this file is to be sourced. After that one
can use completion even for their bash:
# virsh list --<TAB><TAB>
--all --inactive ...
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This command is going to be called from bash completion script in
the following form:
virsh complete -- start --domain
Its only purpose is to return list of possible strings for
completion. Note that this is a 'hidden', unlisted command and
therefore there's no documentation to it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to the previous commit, once we've presented an
--option for a command to the user it makes no sense to offer it
again. Therefore, we can prune all already specified options. For
instance, after this patch:
virsh # migrate --verbose <TAB><TAB>
will no longer offer --verbose option.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of having completers prune returned string list based on
user's input we can do that right after the callback is called.
Only strings matching the prefix will be presented to the user
then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared we can call options'
completer again. At the same time, pass partially parsed input to
the completer callback - it will help the callbacks to narrow
down the list of returned options based on user's input. For
instance, if the completer is supposed to return list of
interfaces depending on user input it may return just those
interfaces defined for already specified domain. Of course,
completers might ignore this parameter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the future, completer callbacks will receive partially parsed
command (and thus possibly incomplete). However, we still want
them to use command options fetching APIs we already have (e.g.
vshCommandOpt*()) and at the same time don't report any errors
(nor call any asserts).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It's better to fetch list of either commands or options just once
and then iterate over it. Moreover, it makes future completers
way simpler as they will return string lists too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When returning a string that needs escaping there are two
scenarios that can happen. Firstly, user already started the
string with a quote (or double quote) in which case we don't need
to do anything - readline takes care of that. However, if they
haven't typed anything yet, we need to escape the string
ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a way of retrieving partly parsed command we
don't need duplicate code that parses the user's input.
Yes, this code removes call of opt's completer, but:
a) current implementation is broken anyway, and
b) it will be added back shortly
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the future, this function is going to be called from
vshReadlineParse() to provide parsed input for completer
callbacks. The idea is to allow the callbacks to provide more
specific data. For instance, for the following input:
virsh # domifaddr --domain fedora --interface <TAB><TAB>
the --interface completer callback is going to be called. Now, it
is more user friendly if the completer offers only those
interfaces found in 'fedora' domain. But in order to do that it
needs to be able to retrieve partially parsed result.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When parsing cmd line which has "--" on it, this is leaked.
Problem is, parser->getNextArg() allocates new string and stores
it into tkdata. But as soon as "--" is detected 'continue' is
issued without any free of the allocated memory.
==5304== 3 bytes in 1 blocks are definitely lost in loss record 1 of 782
==5304== at 0x4C2AF50: malloc (vg_replace_malloc.c:299)
==5304== by 0x8BB5AA9: strdup (strdup.c:42)
==5304== by 0x55842CA: virStrdup (virstring.c:941)
==5304== by 0x172B21: _vshStrdup (vsh.c:162)
==5304== by 0x175E8E: vshCommandArgvGetArg (vsh.c:1622)
==5304== by 0x17551D: vshCommandParse (vsh.c:1418)
==5304== by 0x175F25: vshCommandArgvParse (vsh.c:1638)
==5304== by 0x130940: virshParseArgv (virsh.c:820)
==5304== by 0x130C49: main (virsh.c:922)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Let's add a testcase for a S390 system running kernel version 4.14 on
LPAR.
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Since kernel version 4.7, processor frequency information is available
on S390. Let's adjust the parser so this information shows up for virsh
nodeinfo:
# virsh nodeinfo
CPU model: s390x
CPU(s): 8
CPU frequency: 5000 MHz
CPU socket(s): 1
Core(s) per socket: 8
Thread(s) per core: 1
NUMA cell(s): 1
Memory size: 16273908 KiB
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
