Users might have configured interface so that it's type of
network, but the corresponding network plugs interfaces into an
OVS bridge. Therefore, we have to check for the actual type of
the interface instead of the configured one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex. Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1448268
When migrating to a file (e.g. when doing 'virsh save file'),
couple of things are happening in the thread that is executing
the API:
1) the domain obj is locked
2) iohelper is spawned as a separate process to handle all I/O
3) the thread waits for iohelper to finish
4) the domain obj is unlocked
Now, the problem is that while the thread waits in step 3 for
iohelper to finish this may take ages because iohelper calls
fdatasync(). And unfortunately, we are waiting the whole time
with the domain locked. So if another thread wants to jump in and
say copy the domain name ('virsh list' for instance), they are
stuck.
The solution is to unlock the domain whenever waiting for I/O and
lock it back again when it finished.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since commit v2.2.0-199-g7ce711a30e libvirt stores an updated guest CPU
in domain's live definition and there's no need to update it every time
we want to format the definition. The commit itself tried to address
this in qemuDomainFormatXML, but forgot to fix qemuDomainDefFormatLive.
Not to mention that masking a previously set flag is only acceptable if
the flag was set by a public API user. Internally, libvirt should have
never set the flag in the first place.
https://bugzilla.redhat.com/show_bug.cgi?id=1485022
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In the past we updated host-model CPUs with host CPU data by adding a
model and features, but keeping the host-model mode. And since the CPU
model is not normally formatted for host-model CPU defs, we had to pass
the updateCPU flag to the formatting code to be able to properly output
updated host-model CPUs. Libvirt doesn't do this anymore, host-model
CPUs are turned into custom mode CPUs once updated with host CPU data
and thus there's no reason for keeping the hacks inside CPU XML
formatters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Add a new virStorageNetProtocol for Veritas HyperScale (VxHS) disks
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Documentation states:
"'offset' and 'size' represent an area which must lie entirely within
the device or file." Enforce the that the buffer lies within fully.
Commit 3956af495e broke the blockPeek API since virStorageFileRead
allocates a return buffer and fills it with the data, while the API
fills a user-provided buffer. This did not get caught by the compiler
since the API prototype uses a 'void *'.
Fix it by transferring the data from the allocated buffer to the user
provided buffer.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1491217
The host CPU definitions reported in the capabilities XML may contain
CPU features unknown to QEMU, but the result of virConnectBaselineCPU is
supposed to be directly usable as a guest CPU definition and thus it
should only contain features QEMU knows about.
https://bugzilla.redhat.com/show_bug.cgi?id=1450317
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The implementation of virConnectBaselineCPU may be different for each
hypervisor. Thus it shouldn't really be implmented in the cpu code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Block job QMP commands with underscores rather than dashes were never
released in upstream qemu, (they were added, but modified in the same
release [1]), but a certain distro managed to backport the version in the
middle.
The change also slightly modified semantics for the abort command, which
made us have a lot of code which was only ever present in certain
downstream distros.
Clean the upstream code from the legacy cruft and support only the
upstream implementations.
[1] See qemu commit v1.0-2176-gdb58f9c060
Reviewed-by: Eric Blake <eblake@redhat.com>
The VIR_SECURITY_MANAGER_MOUNT_NAMESPACE flag informs the DAC driver
if mount namespaces are in use for the VM. Will be used for future
changes.
Wire it up in the qemu driver
Commit 703abf1d7 changed the logic so that we don't attempt to re-create
the image if it's a block device. This was done by modifying the
'reuse' variable. Unfortunately after modifying it one of the uses was
to infer whether we should probe the disk format. After changes in the
commit mentioned above we would attempt the probe if the target of the
copy is a block device and the format was not provided explicitly rather
than using the format of the disk.
Fix it by explicitly checking whether the user requested a reuse of the
disk rather than the modified boolean flag.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1490826
https://bugzilla.redhat.com/show_bug.cgi?id=1447169
With this patch users can cold plug a watchdog. Things are pretty
simple because a domain can have at most one watchdog device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When destroying a domain libvirt marks it internally with a
beingDestroyed flag to make sure the qemuDomainDestroyFlags API itself
cleans up after the domain rather than letting an uninformed EOF handler
do it. However, when the domain is being started at the moment libvirt
was asked to destroy it, only the starting thread can properly clean up
after the domain and thus it ignores the beingDestroyed flag. Once
qemuDomainDestroyFlags finally gets a job, the domain may not be running
anymore, which should not be reported as an error if the domain has been
starting up.
https://bugzilla.redhat.com/show_bug.cgi?id=1445600
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In case of real migration (not migrating to file on save, dump etc)
migration info is not complete at time qemu finishes migration
in normal (non postcopy) mode. We need to update disks stats,
downtime info etc. Thus let's not expose this job status as
completed.
To archive this let's set status to 'qemu completed' after
qemu reports migration is finished. It is not visible as complete
job to clients. Cookie code on confirm phase will finally turn
job into completed. As we don't need more things to do when
migrating to file status is set to 'completed' as before
in this case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When getting job info in case mirror does not reach ready phase
fetch mirror stats from qemu. Otherwise mirror stats are already
saved in current job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Looks like it is more simple to drop this optimization as we are
going to add getting disks stats during migration via quering qemu
process and checking if we have to acquire job condition becomes
more complicate.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of checking stat.status let's set status to migrating
as soon as migrate command is send (waiting for completion
is a good place too).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Setting status to none has little value - getting job status
will not return even elapsed time.
After this patch getting job stats stays correct in a sence
it will not fetch migration stats because it consults
stats.status before doing the fetch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Querying destination migration statistics may result in getting
a failure or getting a elapsed time value depending on stats.status
value which is odd. Instead let's always fail. Clients should
be ready to handle this as currently getting failure period
can be considerable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuMigrationFetchJobStatus is rather inconvinient. Some of its
callers don't need status to be updated, some don't need to update
elapsed time right away. So let's update status or elapsed time
in callers instead.
This patch drops updating job status on getting job stats by
client. This way we will not provide status 'completed' while
it is not yet updated by migration routine.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's introduce QEMU_DOMAIN_JOB_STATUS_POSTCOPY state for job.current->status
instead of checking job.current->stats.status. The latter can be changed
when fetching migration statistics. Moving state function from the variable
and leave only store function seems more managable.
This patch removes all state checking usage of stats except for
qemuDomainGetJobStatsInternal. This place will be handled separately.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch simply switches code from using VIR_DOMAIN_JOB_* to
introduced QEMU_DOMAIN_JOB_STATUS_*. Later this gives us freedom
to introduce states for postcopy and mirroring phases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1439991
Whenever a device is being updated via
virDomainUpdateDeviceFlags() API, we parse the device XML and
ideally run some generic checks to validate the configuration
(e.g. if device defines per-device boot order but the domain has
os/boot element already). Well, that's the theory - due to a
missing check we've jumped early from that check function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This commit adds qemu driver implementation to edit xml
configuration of managed save state file of a domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
This commit adds qemu driver implementation to get xml description
for managed save state domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
This API is definitely modifying state of @vm. Therefore it
should grab a job.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
At some places we either already have synchronous job or we just
released it. Also, some APIs might want to use this code without
having to release their job. Anyway, the job acquire code is
moved out to qemuDomainRemoveInactiveJob so that
qemuDomainRemoveInactive does just what it promises.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1467245
Currently, there's a bug when undefining a domain with NVRAM
store. Basically, the unlink() of the NVRAM store file happens
during the undefine procedure iff domain is inactive. So, if
domain is running and undefine is called the file is left behind.
It won't be removed in the domain cleanup process either
(qemuProcessStop). One of the solutions is to remove if
regardless of the domain state and rely on qemu having the file
opened. This still has a downside that if the domain is defined
back the NVRAM store file is going to be new, any changes to the
current one are lost (just like with any other file that is
deleted while a process has it opened). But is it really a
downside?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1458630
Introduce virQEMUDriverConfigTLSDirResetDefaults in order to check
if the defaultTLSx509certdir was changed, then change the default
for any other *TLSx509certdir that was not set to the default default.
Introduce virQEMUDriverConfigValidate to validate the existence of
any of the *_tls_x509_cert_dir values that were uncommented/set,
incuding the default.
Update the qemu.conf description for default to describe the consequences
if the default directory path does not exist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The switch contains considerable amount of changes:
virQEMUCapsRememberCached() is removed because this is now handled
by virFileCacheSave().
virQEMUCapsInitCached() is removed because this is now handled by
virFileCacheLoad().
virQEMUCapsNewForBinary() is split into two functions,
virQEMUCapsNewData() which creates new data if there is nothing
cached and virQEMUCapsLoadFile() which loads the cached data.
This is now handled by virFileCacheNewData().
virQEMUCapsCacheValidate() is removed because this is now handled by
virFileCacheValidate().
virQEMUCapsCacheFree() is removed because it's no longer required.
Add virCapsPtr into virQEMUCapsCachePriv because for each call of
virFileCacheLookup*() we need to use current virCapsPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This is a preparation for following patches where we switch to
virFileCache for QEMU capabilities cache
The host arch will always remain the same but virCaps may change. Now
the host arch is stored while creating new qemu capabilities cache.
It removes the need to pass virCaps into virQEMUCapsCache*() functions.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use virStorageSource accessors to check the file and call
virStorageFileAccess before even attempting to stat the target. This
will be helpful once we try to add network destinations for block copy,
since there will be no need to stat them.
When copying to a block device, the block device will already exist. To
allow users using a block device without any preparation, they need to
use the block copy without VIR_DOMAIN_BLOCK_COPY_REUSE_EXT.
This means that if the target is an existing block device we don't need
to prepare it, but we can't reject it as being existing.
To avoid breaking this feature, explicitly assume that existing block
devices will be reused even without that flag explicitly specified,
while skipping attempts to create it.
qemuMonitorDriveMirror still needs to honor the flag as specified by the
user, since qemu overwrites the metadata otherwise.
https://bugzilla.redhat.com/show_bug.cgi?id=1467826
Commit id 'b9b1aa639' was supposed to add logic to set the allocation
for sparse files when wr_highest_offset was zero; however, an unconditional
setting was done just prior. For block devices, this means allocation is
always returning 0 since 'actual-size' will be zero.
Remove the unconditional setting and add the note about it being possible
to still be zero for block devices. As soon as the guest starts writing to
the volume, the allocation value will then be obtainable from qemu via
the wr_highest_offset.
If a remote call fails during event registration (more than likely from
a network failure or remote libvirtd restart timed just right), then when
calling the virObjectEventStateDeregisterID we don't want to call the
registered @freecb function because that breaks our contract that we
would only call it after succesfully returning. If the @freecb routine
were called, it could result in a double free from properly coded
applications that free their opaque data on failure to register, as seen
in the following details:
Program terminated with signal 6, Aborted.
#0 0x00007fc45cba15d7 in raise
#1 0x00007fc45cba2cc8 in abort
#2 0x00007fc45cbe12f7 in __libc_message
#3 0x00007fc45cbe86d3 in _int_free
#4 0x00007fc45d8d292c in PyDict_Fini
#5 0x00007fc45d94f46a in Py_Finalize
#6 0x00007fc45d960735 in Py_Main
#7 0x00007fc45cb8daf5 in __libc_start_main
#8 0x0000000000400721 in _start
The double dereference of 'pyobj_cbData' is triggered in the following way:
(1) libvirt_virConnectDomainEventRegisterAny is invoked.
(2) the event is successfully added to the event callback list
(virDomainEventStateRegisterClient in
remoteConnectDomainEventRegisterAny returns 1 which means ok).
(3) when function remoteConnectDomainEventRegisterAny is hit,
network connection disconnected coincidently (or libvirtd is
restarted) in the context of function 'call' then the connection
is lost and the function 'call' failed, the branch
virObjectEventStateDeregisterID is therefore taken.
(4) 'pyobj_conn' is dereferenced the 1st time in
libvirt_virConnectDomainEventFreeFunc.
(5) 'pyobj_cbData' (refered to pyobj_conn) is dereferenced the
2nd time in libvirt_virConnectDomainEventRegisterAny.
(6) the double free error is triggered.
Resolve this by adding a @doFreeCb boolean in order to avoid calling the
freeCb in virObjectEventStateDeregisterID for any remote call failure in
a remoteConnect*EventRegister* API. For remoteConnect*EventDeregister* calls,
the passed value would be true indicating they should run the freecb if it
exists; whereas, it's false for the remote call failure path.
Patch based on the investigation and initial patch posted by
fangying <fangying1@huawei.com>.
Commit 7456c4f5f introduced a regression by not reloading the backing
chain of a disk after snapshot. The regression was caused as
src->relPath was not set and thus the block commit code could not
determine the relative path.
This patch adds code that will load the backing store string if
VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT and store it in the correct place
when a snapshot is successfully completed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1461303
Changing labelling of the images does not need to happen after setting
the labeling and lock manager access. This saves the cleanup of the
labeling if the relative path can't be determined.
Most places which want to check ABI stability for an active domain need
to call this API rather than the original
qemuDomainDefCheckABIStability. The only exception is in snapshots where
we need to decide what to do depending on the saved image data.
https://bugzilla.redhat.com/show_bug.cgi?id=1460952
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit v3.4.0-44-gac793bd71 fixed a memory leak, but failed to return
the special -3 value. Thus an attempt to start a domain with corrupted
managed save file would removed the corrupted file and report
"An error occurred, but the cause is unknown" instead of starting the
domain from scratch.
https://bugzilla.redhat.com/show_bug.cgi?id=1460962
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
If QEMU is new enough and we have the live updated CPU definition in
either save or migration cookie, we can use it to enforce ABI. The
original guest CPU from domain XML will be stored in private data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The destination host may not be able to start a domain using the live
updated CPU definition because either libvirt or QEMU may not be new
enough. Thus we need to send the original guest CPU definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The following patches will add an actual content in the cookie and use
the data when restoring a domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new structure encapsulates save image header and associated data
(domain XML).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function is now called virQEMUSaveDataWrite and it is now doing
everything it needs to save both the save image header and domain XML to
a file. Be it a new file or an existing file in which a user wants to
change the domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function is supposed to update the save image header after a
successful migration to the save image file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a preparation for creating a new virQEMUSaveData structure which
will encapsulate all save image header data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since virQEMUSaveHeader will be followed by more than just domain XML,
the old name would be confusing as it was designed to describe the
length of all data following the save image header.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This will be used later when a save cookie will become part of the
snapshot XML using new driver specific parser/formatter functions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Allow starting the block-copy job for a persistent domain if a user
declares by using a flag that the job will not be recovered if the VM is
switched off while the job is active.
This allows to use the block-copy job with persistent VMs under the same
conditions as would apply to transient domains.
While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainGetBlockInfo would error out if qemu did not report
'wr_highest_offset'. This usually does not happen, but can happen
briefly during active layer block commit. There's no need to report the
error, we can simply report that the disk is fully alocated at that
point.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452045
In 48d9e6cdcc and friends we've allowed users to back guest
memory by a file inside the host. And in order to keep things
manageable the memory_backing_dir variable was introduced to
qemu.conf to specify the directory where the files are kept.
However, libvirt's policy is that directories are created on
domain startup if they don't exist. We've missed this one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Setting the 'group_name' for a disk would falsely trigger a error path
as in commit 4b57f76502 we did not properly check the return value of
VIR_STRDUP.
Since we allow active layer block commit the users are allowed to commit
the top of the chain (e.g. vda) into the backing image. The API would
not accept that parameter, as it tried to look up the image in the
backing chain.
Add the ability to use the top level image target name explicitly as the
top image of the block commit operation.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1451394
Since commit c5f6151390 qemuDomainBlockInfo tries to update the
"physical" storage size for all network storage and not only block
devices.
Since the storage driver APIs to do this are not implemented for certain
storage types (RBD, iSCSI, ...) the code would fail to retrieve any data
since the failure of qemuDomainStorageUpdatePhysical is fatal.
Since it's desired to return data even if the total size can't be
updated we need to ignore errors from that function and return plausible
data.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1442344
Not all async jobs are visible via virDomainGetJobStats (either they are
too fast or getting the stats is not allowed during the job), but
forcing all of them to advertise the operation is easier than hunting
the jobs for which fetching statistics is allowed. And we won't need to
think about this when we add support for getting stats for more jobs.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuDomainGetNumaParameters would return the automatic nodeset even for
the persistent config if the domain was running. This is incorrect since
the automatic nodeset will be re-queried upon starting the vm.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1445325
The code that validates whether an internal snapshot is possible would
reject an empty but not-readonly drive. Since floppies can have this
property, add a check for emptiness.
So far our code is full of the following pattern:
dom = virGetDomain(conn, name, uuid)
if (dom)
dom->id = 42;
There is no reasong why it couldn't be just:
dom = virGetDomain(conn, name, uuid, id);
After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In 9e2465834 a check that denies internal snapshots when pflash
based loader is configured for the domain. However, if there's
none and an user tries to do an internal snapshot they will
witness daemon crash as in that case vm->def->os.loader is NULL
and we dereference it unconditionally.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
One of the problems with our virGetDomain function is that it
copies just domain name and domain UUID. Therefore it's very
easy to forget aboud domain ID. This can cause some bugs, like
virConnectGetAllDomainStats not reporting proper domain IDs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The hyperv panic notifier reports additional data in form of 5 registers
that are reported in the crash event from qemu. Log them into the VM log
file and report them as a warning so that admins can see the cause of
crash of their windows VMs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426176
That file has only two exported files and each one of them has
different naming. virNode is what all the other files use, so let's
use it. It wasn't used before because the clash with public API
naming, so let's fix that by shortening the name (there is no other
private variant of it anyway).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no "node driver" as there was before, drivers have to do
their own ACL checking anyway, so they all specify their functions and
nodeinfo is basically just extending conf/capablities. Hence moving
the code to src/conf/ is the right way to go.
Also that way we can de-duplicate some code that is in virsysfs and/or
virhostcpu that got duplicated during the virhostcpu.c split. And
Some cleanup is done throughout the changes, like adding the vir*
prefix etc.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Management tools may want to check whether the threshold is still set if
they missed an event. Add the data to the bulk stats API where they can
also query the current backing size at the same time.
Detect the node names when setting block threshold and when reconnecting
or when they are cleared when a block job finishes. This operation will
become a no-op once we fully support node names.
Add the fields to support setting tls-creds and tls-hostname during
a migration (either source or target). Modify the query migration
function to check for the presence and set the field for future
consumers to determine which of 3 conditions is being met (NULL,
present and set to "", or present and sent to something). These
correspond to qemu commit id '4af245dc3' which added support to
default the value to "" and allow setting (or resetting) to ""
in order to disable. This reset option allows libvirt to properly
use the tls-creds and tls-hostname parameters.
Modify code paths that either allocate or use stack space in order
to call qemuMigrationParamsClear or qemuMigrationParamsFree for cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the variable store (<nvram>) file is raw qemu can't do a snapshot of
it and thus the snapshot fails. QEMU rejects such snapshot by a message
which would not be properly interpreted as an error by libvirt.
Additionally allowing to use a qcow2 variable store backing file would
solve this issue but then it would become eligible to become target of
the memory dump.
Offline internal snapshot would be incomplete too with either storage
format since libvirt does not handle the pflash file in this case.
Forbid such snapshot so that we can avoid problems.
We reported error in caller virQEMUCapsCacheLookupByArch.
So the same error messages in qemuConnectGetDomainCapabilities
is useless.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
While the code path that queries the monitor allocates a separate copy
of the 'group_name' string the path querying the config would not copy
it. The call to virTypedParameterAssign would then steal the pointer
(without clearing it) and the RPC layer freed it. Any subsequent call
resulted into a crash.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1433183
https://bugzilla.redhat.com/show_bug.cgi?id=1379200
When we are restoring a domain from a saved image, or just
updating its XML in the saved image - we have to make sure that
the ABI guests sees will not change. We have a function for that
which reports errors. But for some reason if this function fails,
we call it again with slightly different argument. Therefore it
might happen that we overwrite the original error and leave user
with less helpful one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have some qemuSecurity wrappers over
virSecurityManager APIs, lets make sure everybody sticks with
them. We have them for a reason and calling virSecurityManager
API directly instead of wrapper may lead into accidentally
labelling a file on the host instead of namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Previously the code called virStorageSourceUpdateBlockPhysicalSize which
did not do anything on empty drives since it worked only on block
devices. After the refactor in c5f6151390 it's called for all devices
and thus attempts to deref the NULL path of empty drives.
Add a check that skips the update of the physical size if the storage
source is empty.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1420718
This follows the same check for disk, because we cannot remove iothread
if it's used by disk or by controller. It could lead to crashing QEMU.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If virDomainDelIOThread API was called with VIR_DOMAIN_AFFECT_LIVE
and VIR_DOMAIN_AFFECT_CONFIG and both XML were already a different
it could result in removing iothread from config XML even if there
was a disk using that iothread.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The bare fact that mnt namespace is available is not enough for
us to allow/enable qemu namespaces feature. There are other
requirements: we must copy all the ACL & SELinux labels otherwise
we might grant access that is administratively forbidden or vice
versa.
At the same time, the check for namespace prerequisites is moved
from domain startup time to qemu.conf parser as it doesn't make
much sense to allow users to start misconfigured libvirt just to
find out they can't start a single domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These functions do not need to see the whole virDomainDiskDef.
Moreover, they are going to be called from places where we don't
have access to the full disk definition. Sticking with
virStorageSource is more than enough.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a function for properly assigning the blockdeviotune
info, let's use it instead of dropping the group name on every
assignment. Otherwise it will not work with both --live and --config
options.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For example when both total_bytes_sec and total_bytes_sec_max are set,
but the former gets cleaned due to new call setting, let's say,
read_bytes_sec, we end up with this weird message for the command:
$ virsh blkdeviotune fedora vda --read-bytes-sec 3000
error: Unable to change block I/O throttle
error: unsupported configuration: value 'total_bytes_sec_max' cannot be set if 'total_bytes_sec' is not set
So let's make it more descriptive. This is how it looks after the change:
$ virsh blkdeviotune fedora vda --read-bytes-sec 3000
error: Unable to change block I/O throttle
error: unsupported configuration: cannot reset 'total_bytes_sec' when 'total_bytes_sec_max' is set
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1344897
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We were setting it based on whether it was supported and that lead to
setting it to NULL, which our JSON code caught. However it ended up
producing the following results:
$ virsh blkdeviotune fedora vda --total-bytes-sec-max 2000
error: Unable to change block I/O throttle
error: internal error: argument key 'group' must not have null value
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Extract the call to qemuDomainSelectHotplugVcpuEntities outside of
qemuDomainSetVcpusLive and decide whether to hotplug or unplug the
entities specified by the cpumap using a boolean flag.
This will allow to use qemuDomainSetVcpusLive in cases where we prepare
the list of vcpus to enable or disable by other means.
For the blockjobs, where libvirt is able to track the state internally
we can fix locking of images we can remove the appropriate locks.
Also when doing a pivoting operation we should not acquire the lock on
any of those images since both are actually locked already.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1302168
Images that became the backing chain of the current image due to the
snapshot need to be unlocked in the lock manager. Also if qemu was
paused during the snapshot the current top level images need to be
released until qemu is resumed so that they can be acquired properly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1191901
The code at first changed the definition and then rolled it back in case
of failure. This was ridiculous. Refactor the code so that the image in
the definition is changed only when the snapshot is successful.
The refactor will also simplify further fix of image locking when doing
snapshots.
Libvirt is able to properly model what happens to the backing chain
after a snapshot so there's no real need to redetect the data.
Additionally with the _REUSE_EXT flag this might end up in redetecting
wrong data if the user puts wrong backing chain reference into the
snapshot image.
The code at the very bottom of the DAC secdriver that calls
chown() should be fine with read-only data. If something needs to
be prepared it should have been done beforehand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When coldplugging vcpus to a VM that already has a few hotpluggable
vcpus the code might generate invalid configuration as
non-hotpluggable cpus need to be clustered starting from vcpu 0.
This fix forces the added vcpus to be hotpluggable in such case.
Fixes a corner case described in:
https://bugzilla.redhat.com/show_bug.cgi?id=1370357
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 4b951d1e38 missed the fact that the
VM needs to be resumed after a live external checkpoint (memory
snapshot) where the cpus would be paused by the migration rather than
libvirt.
According to commit id '0282ca45a' the 'physical' value should
essentially be the last offset of the image or the host physical
size in bytes of the image container. However, commit id '15fa84ac'
refactored the GetBlockInfo to use the same returned data as the
GetStatsBlock API for an active domain. For the 'entry->physical'
that would end up being the "actual-size" as set through the
qemuMonitorJSONBlockStatsUpdateCapacityOne (commit '7b11f5e5').
Digging deeper into QEMU code one finds that actual_size is
filled in using the same algorithm as GetBlockInfo has used for
setting the 'allocation' field when the domain is inactive.
The difference in values is seen primarily in sparse raw files
and other container type files (such as qcow2), which will return
a smaller value via the stat API for 'st_blocks'. Additionally
for container files, the 'capacity' field (populated via the
QEMU "virtual-size" value) may be slightly different (smaller)
in order to accomodate the overhead for the container. For
sparse files, the state 'st_size' field is returned.
This patch thus alters the allocation and physical values for
sparse backed storage files to be more appropriate to the API
contract. The result for GetBlockInfo is the following:
capacity: logical size in bytes of the image (how much storage
the guest will see)
allocation: host storage in bytes occupied by the image (such
as highest allocated extent if there are no holes,
similar to 'du')
physical: host physical size in bytes of the image container
(last offset, similar to 'ls')
NB: The GetStatsBlock API allows a different contract for the
values:
"block.<num>.allocation" - offset of the highest written sector
as unsigned long long.
"block.<num>.capacity" - logical size in bytes of the block device
backing image as unsigned long long.
"block.<num>.physical" - physical size in bytes of the container
of the backing image as unsigned long long.
