Currently, the way we format PCI address is using printf-s
precision, e.g. "%.4x". This works if we don't want to print any
value outside of bounds (which is usually the case). However,
turns out, PCI domain can be 0x10000 which doesn't work well with
our format strings. However, if we change the format string to
"%04x" then we still pad small values with zeroes but also we are
able to print values that are larger than four digits. In fact,
this format string used by kernel to print a PCI address:
"%04x:%02x:%02x.%d"
The other three format strings (for bus, device and function) are
changed too, so that we use the same format string as kernel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a bunch of new virsh commands for managing checkpoints in
isolation. More commands are needed for performing incremental
backups, but these commands were easy to implement by modeling heavily
after virsh-snapshot.c. There is no need for checkpoint-revert or
checkpoint-current since those snapshot APIs have no checkpoint
counterpart. Similarly, it is not necessary to change which
checkpoint is current when redefining from XML, since until we
integrate checkpoints with snapshots, there is only a linear chain
(and you can deduce the current checkpoint by instead using
'checkpoint-list --leaves'). Other aspects of checkpoint-list are
also a bit simpler than the snapshot counterpart, in part because we
don't have to cater to back-compat to older API.
Upcoming patches will test these interfaces once the test driver
supports checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Ever since --parallel-connections option for virsh migrate was
introduced we did not properly check the return value of
vshCommandOptInt. We would set VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS
parameter even if vshCommandOptInt returned 0 (which means
--parallel-connections was not specified) when another int option which
was checked earlier was specified with a nonzero value.
Specifically, running virsh migrate with either
--auto-converge-increment, --auto-converge-initial, --comp-mt-dthreads,
--comp-mt-threads, or --comp-mt-level would set
VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS parameter and if --parallel
option was not used, libvirt would complain
error: invalid argument: Turn parallel migration on to tune it
even though --parallel-connections option was not used at all.
https://bugzilla.redhat.com/show_bug.cgi?id=1726643
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The old flag name confused some users into thinking it's the correct way
to undefine a VM with libvirt (not storage volume) snapshots.
The correct flag in that case is way less obvious: --snapshots-metadata.
Rename the flag (by adding an alias) to something which will promote
looking up the actual purpose of the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Reword the end of the help string to make it more obvious that the VM
must be inactive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Apparently "allow(s) to frobnicate" is not correct English, and
either "allow(s) one to frobnicate" or "allow(s) frobnicating"
should be used instead.
Spotted by Lintian (spelling-error-in-{binary,manpage} tags).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This completer is used to offer shutdown/reboot modes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although it is not needed at the moment, do not rely on a value being
set before the first jump to cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use a temporary 'rc' variable to avoid comparing signed
and unsigned integers in the cleanup section.
Bug introduced by commit 3072ded which added the comparison against
the unsigned 'i'.
Also make niothreads size_t to mark that it should be unsigned.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of using niothreads which defaults to zero, use the common
pattern with a ret varaible set to true just before the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Ever since the introduction of the guest-get-fsinfo command
in QEMU commit 46d4c572 qga/qapi-schema.json says that
the 'disks' array can possibly be empty. For example when getting
the target list is unsupported:
https://bugzilla.redhat.com/show_bug.cgi?id=1567041
Pass an empty string instead of NULL to vshTableRowAppend to prevent
a mismatched column number.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use vshPrintExtra to report this message. It is a human-readable
explanation rather than an error.
Also, it is a very special system that runs with no filesystems.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Failing to print the table is also a reason to return failure
and print the reported error.
Switch to the usual pattern where we fall through the cleanup
label right after setting ret to true instead of infering the
return value from the number of filesystems returned.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Do not use 'ret' throughout the whole function to avoid confusion
and comparison of unsigned 'i' against signed 'ret'.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.
Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.
While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:
@ rule1 @
identifier a, b;
@@
- b = a;
...
- a = NULL;
+ VIR_STEAL_PTR(b, a);
Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 3072ded3 changed the waya to format the vcpu pinning info
and forget to get cpumap for each vcpu during the loop, that cause
vcpupin command will display vcpu 0 info for other vcpus.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a command to allow for setting various dynamic IOThread polling
interval scope (poll-max-ns, poll-grow, and poll-shrink). Describe
the values in the virsh.pod in as generic terms as possible. The
more specific QEMU algorithm has been divulged in the previous patch.
Based heavily on code originally posted by Pavel Hrdina
<phrdina@redhat.com>, but altered to only provide one command
and to not managed a poll disabled state.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The domxml-to-native virsh command accepts either --xml or --domain
option followed by a file or domain name respectively. The --domain
option is documented as required, which means an argument with no option
is treated as --xml. Commit v4.3.0-127-gd86531daf2 broke this by making
--domain optional and thus an argument with no option was treated as
--domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1633077
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We're passing size_t but using format for unsigned long.
Introduced in latest vshTable rework patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add --alias to support custom alias in virsh attach-interface.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add --alias to support custom disk alias in virsh attach-disk.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After you go through command mentioned above, completer
finds what state the device is currently in, and suggests
an opposite state.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adding sata bus address support to the optional address parameter of virsh
attach-disk. The address is used as controller.bus.unit. e.g.
sata:0.0.0
Signed-off-by: Han Han <hhan@redhat.com>
Adding usb bus address support to the optional address parameter
of virsh attach-disk. The address is used as bus:port. e.g. usb:1:1.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similarly to cpu-models these two commands do not operate on a domain
and should be listed in the "Host and Hypervisor" commands section.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The next patch will use it in virsh-completer.c for returning the
strings of domain event name. At the same time, rename it to
avoid possible name clashing.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
centralize the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
to avoid unnecessary duplicated definition
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.
The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Similarly to other commands add an argument which allows to check the
XML which would be used to execute the operation instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For given domain fetch list of defined interfaces. This can be
used for commands like domif-getlink and others. If available,
the interface name is returned (e.g. "vnet0", usually available
only for running domains), if not the MAC address is returned.
Moreover, the detach-interface command requires only MAC address
and therefore we have new flag that forces the completer to
return just the MAC address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared let the fun begin. This
completer is very simple and returns domain names. Moreover,
depending on the command it can return just a subset of domains
(e.g. only running/paused/transient/.. ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is literally only a wrapper around virBitmapNewData() and
virBitmapFormat(), only the naming was wrong since it was introduced.
And because we have virBitmap*String functions where the meaning of
the 'String' is constant, this might confuse someone.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The 'set-lifcycle-action' is throwing a weird error after executing it with
the '--help' option. The command output is showing the options 'type' and
'action' are as optional, but they aren't. Both are required.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> [--type <string>] [--action <string>] ...
...
OPTIONS
[--domain] <string> domain name, id or uuid
error: internal error: bad options in command: 'set-lifecycle-action'
After applying this patch, both arguments are required now.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> <type> <action> [--config] ...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509870
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
In some cases there's dangling backward slash at the end of multi
line macros. While technically the code works, it will stop if
some empty lines are removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit fdeac7a05f tried to fix the output
of 'virsh domxml-to-native --help' by switching types around. One of the
changes broke the option parser. VSH_OT_ARGV should be used only for
variable argument count, not to make the help generator look pretty.
The correct option type in this case is VSH_OT_STRING as it's not
mandatory now since it can be substituted by using --domain.
This makes --help for this command look incorrect, but the parser works
as it should.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1494400
The command "info migrate" of qemu outputs the dirty-pages-rate during
migration, but page size is different in different architectures. So
page size should be output to calculate dirty pages in bytes.
Page size is already implemented with commit
030ce1f8612215fcbe9d353dfeaeb2937f8e3f94 in qemu.
Now Implement the counter-part in libvirt.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Requesting an automated switch to a post-copy migration (using
--timeout-postcopy) without actually enabling post-copy migration (using
--postcopy) doesn't really do anything. Let's make this dependency
explicit to avoid unexpected behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1455023
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A variable named 'socket' clashes with the function of the same
name, causing build failures due to warnings on some platforms.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This commit adds the unix socket URL support to 'domdisplay' command.
Before, even if an user was using unix socket to define a spice graphics,
the command 'domdisplay' showed that the settings were not supported. Now,
the command shows the proper URL: spice+unix://foo/bar.sock.
Settings:
<graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1'/>
</graphics>
<graphics type='spice'>
<listen type='socket' socket='/tmp/spice.sock'/>
</graphics>
Before:
virsh # domdisplay --all Windows7
vnc://127.0.0.1:0
After:
virsh # domdisplay --all Windows7
vnc://127.0.0.1:0
spice+unix:///tmp/spice.sock
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1336720
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
While looking to implement a migrate-getmaxdowntime command (coming),
I noticed that the setmaxdowntime is incorrectly looking at its
parameter as a signed longlong. Not sure how that got past gcc, but
here's a simple patch to make the command line parsing and the parameter to
the worker functions all have the correct (unsigned) type.
Signed-off-by: Scott Garfinkle <seg@us.ibm.com>
The command 'domdisplay' is not freeing the domain pointer properly in
cleanup section. See the error below:
virsh # domdisplay WINDOWS7
vnc://127.0.0.1:0
virsh # quit
error: One or more references were leaked after disconnect from the hypervisor
Valgrind report:
==29168== 66 (56 direct, 10 indirect) bytes in 1 blocks are definitely lost in loss record 154 of 239
==29168== at 0x4C2FB55: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==29168== by 0x5505324: virAllocVar (viralloc.c:560)
==29168== by 0x555A61B: virObjectNew (virobject.c:199)
==29168== by 0x561F367: virGetDomain (datatypes.c:284)
==29168== by 0x5680979: get_nonnull_domain (remote_driver.c:8143)
==29168== by 0x5680979: remoteDomainLookupByName (remote_client_bodies.h:3047)
==29168== by 0x5623D9A: virDomainLookupByName (libvirt-domain.c:425)
==29168== by 0x160480: virshLookupDomainInternal (virsh-util.c:59)
==29168== by 0x160547: virshCommandOptDomainBy (virsh-util.c:98)
==29168== by 0x13D3A9: cmdDomDisplay (virsh-domain.c:10963)
==29168== by 0x165680: vshCommandRun (vsh.c:1327)
==29168== by 0x12E320: main (virsh.c:953)
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Resolves a bug in domxml-to-native command option, so that the
following command displays the help information correctly:
'virsh domxml-to-native --help'.
Signed-off-by: Daniel Liu <srwx4096@gmail.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
The option allows someone to run domain-to-native on already existing
domain without the need of supplying their XML. It is basically
wrapper around 'virsh dumpxml | virsh domxml-to-native /dev/stdin'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=835476
Signed-off-by: Daniel Liu <srwx4096@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
virt-install and virt-manager both default to explicitly setting
"io='native'" in the disk "driver" tag. virsh, however, does not and also
does not provide an option to specify that setting at all. As a result,
disks use a different IO mechanism (the default, "threads") when attached
post-setup using virsh. Adding this option allows users to keep disk
performance consistent for disks attached at install, and those attached
afterward.
The parameter is reported by virDomainGetJobStats API and
VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event and it can be used to identify
the operation (migration, snapshot, ...) to which the reported
statistics belong.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainFree has it's quirks (does not like NULL pointers, resets
libvirt errors). Replace it by a virsh helper which will allow us to
centrally fix issues with it.
The syntax-check rule will prohibit new uses of virDomainFree.
Move virshLookupDomainBy, virshCommandOptDomainBy and
virshCommandOptDomainBy to the helper file. Additionally turn the
virshCommandOptDomainBy macro into a function.
==18591== 16 bytes in 1 blocks are definitely lost in loss record 41 of 183
==18591== at 0x4C2B934: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==18591== by 0x54EBB1C: virAllocN (viralloc.c:191)
==18591== by 0x1628CA: _vshMalloc (vsh.c:136)
==18591== by 0x1344C4: virshVcpuPinQuery (virsh-domain.c:6603)
==18591== by 0x1344C4: cmdVcpuPin (virsh-domain.c:6707)
==18591== by 0x1631BF: vshCommandRun (vsh.c:1312)
==18591== by 0x12DBB1: main (virsh.c:961)
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
All options started with underscores, but we switched them to dashes
later on, making the style consistent. The latest addition, however,
did not respect that, so let's change that as well. It is tempting to
just change the name instead of adding alias, especially since nobody
ever used it, which we know thanks to the fact that it didn't work.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Function vshCommandOptStringReq() returns -1 on error and 0 on
success. The code, however, used the 'group_name' variable only if it
returned 1 (never).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When setting perf events, the enabled/disabled perf events are not
listed. Since we know which events were changed it's possible to
print out the values on successful set, such as :
virsh perf Domain --enable instructions --disable cache_misses
instructions : enabled
cache_misses : disabled
Created a helper to print the messages - use the vshPrintExtra to
adhere to the --quiet|-q option being set by some script. This will
cause the get code to print nothing, but will return success/failure.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit v1.3.3-181-gb028e9d7c implmented support for
VIR_MIGRATE_PARAM_PERSIST_XML migration parameter, but forgot to update
virsh.
https://bugzilla.redhat.com/show_bug.cgi?id=835300
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Correcting the error reporting method by using VSH_REQUIRE_OPTION
instead of virReportError
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1349898
Add the duration parameters to the virsh input/output for blkdeviotune
command and describe them in the pod file.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework the repetitive lines to add iotune values into easier to read macros.
One to handle the SCALED values and one to handle the non scaled values.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the VM is offline virsh attempted to at least report the pinning
information for the VM. This would not work properly now that the vcpus
can be sparse. Fix it by getting the vcpu states from the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375920
The fallback code used if virDomainGetVcpusFlags is not supported used
wrong XPath queries and basically did not work at all. Fix them to point
to the <domain> <vcpu> element instead of <vcpus> which was not present
until lately.
For one VM, it could had more than one graphical display.
Such as we coud add both vnc and spice display to a VM.
This patch introduces '--all' for showing all
possible graphical display of a active VM.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For compatibility reasons virDomainSetVcpus needs to add vcpus as non
hotpluggable which means that the users will not be able to unplug it
after the VM has started. Add a flag that will allow to tell the API
that the unpluggable vcpus are okay.
When using
virsh net-event non-existing-net
the error message says that 'either --list or event type is required'
This is misleading as 'virsh net-event $valid-event-type' is not going
to work either. What is expected is 'virsh net-event --event
$valid-event-type'
This commit fixes the string in pool-event, nodedev-event, event, and
net-event.
virVcpuInfo contains the vcpu number that the data refers to. Report
what's returned by the daemon rather than the sequence number as with
sparse vcpu topologies they won't match.
Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.
Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179
The prettified JSON string already contains a newline so don't print
another one. This allows to pipe the json output (in conjunction with
the --quiet option) to files without having to truncate them afterwards.
They can be used to tune auto-convergence algorithm (which is enabled
with VIR_MIGRATE_AUTO_CONVERGE).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Thanks to our smart option parser which automatically assigns positional
parameters the following (previously working) command fails:
virsh migrate test qemu+ssh://1.2.3.4/system tcp://1.2.3.4/
error: invalid argument: Unsupported compression method
'tcp://1.2.3.4/'
We need to make sure new options are added at the end of the list rather
than where they logically belong.
Reported by Brian Rak.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Extend the lxc-enter-namespace command so that it joins the
containers' cgroups before starting new namespaces. This
ensures that the commands run have the normal resource
limits applied
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently if a guest has listen address 0.0.0.0 or [::] and you run
"virsh domdisplay $domain" you always get "spice://localhost:$port".
We want to print better address if someone is connected from a different
computer using "virsh -c qemu+ssh://some.host/system". This patch fixes the
behavior of virsh to print in this case "spice://some.host:$port".
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1332446
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=885380
Use vshCommandOptScaledInt instead of vshCommandOptULongLong so that
values with suffixes can be passed when bytes are being passed along.
Values for the iops parameters still need to be given in the absolute
form as they are not bytes but numbers.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
cmdDetachInterface function checks for live config
flags and then passes the live/config domain xml
to virshDomainDetachInterface accordingly.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
After failing to parse the perf event list, the code would return
failure without freeing the previously acquired object. Rearrange the
code to avoid the problem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329046
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
When using the --start option, the show_count should not be set to
max_id as the --start <cpu> means we dont need those many initial cpu
stats. Hence, show_count should be adjusted accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1249441
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that we have @flags we can support changing perf events just
in active or inactive configuration regardless of the other.
Previously, calling virDomainSetPerfEvents set events in both
active and inactive configuration at once. Even though we allow
users to set perf events that are to be enabled once domain is
started up. The virDomainGetPerfEvents API was flawed too. It
returned just runtime info.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Everywhere else we use a comma separated list. There's no good
reason to make 'perf' command an exception. Currently, it accepts
string list separated by '|'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.
In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Some hypervisors (namely qemu) can have a separate connecton for
non-shared disks migration of active domains. Currently we have
no means to control the port of such a connection. At the same
time we have options to control port of memory migration traffic
(thru migration uri) as well as interfaces that target server
is bound to for incoming migration (thru VIR_MIGRATE_PARAM_LISTEN_ADDRESS).
Let's add the option for setting disks port too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The API docs state that the API queries pinning info for all vCPUs and
thus we should allocate the bitmap even for the inactive ones.
The API will currently return bitmap only for the active vCPUs but that
will change in the future.
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since we have the macro there's no need for us to unwind it by
hand and check for mutually exclusive flags ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than setting flags to -1 if none were specified, move the logic
to use the old API to the place where we need to decide. It simplifies
the logic a bit.
Since the code is changing the source image path by modifying the
existing XML snippet the <backingStore> stays in place.
As <backingStore> is relevant to the <source> part of the image, the
update of that part makes the element invalid.
CD/floppy images usually don't have a backing chain and the element is
currently ignored though but it might start being used in the future so
let's start behaving correctly.
Drop the <backingStore> subtree once we want to update the XML.
Before this patch, you'd get:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<backingStore type="file" index="1">
<format type="qcow2"/>
<source file="/var/lib/libvirt/images/vm.1436949097"/>
<backingStore/>
</backingStore>
<target dev="hdc" bus="ide"/>
...
</disk>
After:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<target dev="hdc" bus="ide"/>
...
</disk>
The macro would eat the first parameter. In some cases the format string
for vshPrint was eaten. In other cases the calls referenced variables
which did not exist in the given context. Avoid errors by doing compile
time checking.
After a block job hits 100%, we only need to apply a timeout waiting for
a block job event if exactly one of the BLOCK_JOB or BLOCK_JOB_2
callbacks were able to be registered.
If neither callback could be registered, there's clearly no need for a
timeout.
If both callbacks were registered, then we're guaranteed to eventually
get one of the events. The path being used by virsh must be exactly the
source path or target device in the domain's disk definition, and these
are the respective strings sent back in these two events.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When waiting for a block job, the various statuses (COMPLETED, READY,
CANCELED, etc.) should all be treated consistently by having the loop be
exited with "break". Use "goto cleanup" for the error cases only, when
no block job status is available.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
There is no need to call virshPrintJobProgress() unless the block job's
cur or end cursors have changed since the last iteration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
After commit 57177f1, the cpu-stats command format change to:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378732785511
vcpu_time is not user friendly. After this patch, it will
change back:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378.732785511 seconds
https://bugzilla.redhat.com/show_bug.cgi?id=1301807
Signed-off-by: Luyao Huang <lhuang@redhat.com>
virDomainGetCPUStats doesn't support flags so there's no need to carry
the 'flags' variable around. Additionally since the API is poorly
designed I doubt that it will be extended.
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
It all works like this. The change-media command dumps domain
XML, finds the corresponding cdrom device we want to change media
in and returns it in the xmlNodePtr form. This way we don't have
to bother with keeping all the subelements or attributes that we
don't care about in the XML that is fed back to libvirt for the
update API.
Now, the problem is we try to be clever here and detect if disk
already has a source (indicated by <source/> subelement).
However, bare fact that the element is there does not mean disk
has source. Make our clever check better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option. Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect current domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect running domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect next boot". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. Note that not all
'{.name = "persistent",' entries are replaced, just those that have the
common .help string of "make live change persistent".
Non replaced instances are unique to the command.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which will be used to pass the translatable
helpstr since not all domain options can take the same string.
The majority of the options take 'N_("domain name, id or uuid")', so
create a separate macro with a _FULL suffix while those that do not
take the same string will use the VIRSH_COMMON_OPT_DOMAIN macro.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Implement a --timestamp option for 'virsh qemu-monitor-event', similar
to the one for 'virsh event'.
When the option is used, the human-readable timestamp will be printed
before the message, and the timing information provided by QEMU will
not be displayed.
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1281710
Commit id '3c7590e0a' added the flag to the rbd backend, but provided
no means via virsh to use the flag. This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.
For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.
Currently only supported for rbd backends.
Instead of the custom error:
error: iothreadpin: invalid cpulist.
use vshCommandOptStringReq and let it report a more specific error:
error: Failed to get option 'cpulist': Option argument is empty
Adding this feature will allow users to easily attach a hostdev network
interface using PCI passthrough.
The interface can be attached using --type=hostdev and PCI address or
as --source. This command also allows you to tell, whether the interface
should be managed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997561
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
While parsing device addresses we should use correct base and don't
count on auto-detect. For example, PCI address uses hex numbers, but
each number starting with 0 will be auto-detected as octal number and
that's wrong. Another wrong use-case is for PCI address if for example
bus is 10, than it's incorrectly parsed as decimal number.
PCI and CCW addresses have all values as hex numbers, IDE and SCSI
addresses are in decimal numbers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The number of vCPUs for a guest must be between 1 and the
maximum value configured in the domain XML. This commit
introduces checks to make sure that passing count <= 0
results in an error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1248277
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The condition checking whether --format was specified was incorrect.
virsh crashed if the following format was used:
virsh dump VM dump --format '' --memory-only
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1272301
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
Even after my rework of startupPolicy handling, one command
slipped my attention. The change-media command has a very unique
approach to constructing disk XML. However, it will not preserve
startupPolicy attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Although 0 length block jobs aren't entirely useful, the output of virsh
blockjob is empty due to the condition that suppresses the output for
migration jobs that did not start. Since the only place that actually
uses the condition that suppresses the output is in migration, let's
move the check there and thus add support for 0 of 0 equaling to 100%.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1196711
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately attach-interface
was missing it. Maybe nobody had needed it yet. Well, I did
just now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.
The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.
<interface type='udp'>
<mac address='52:54:00:5c:67:56'/>
<source address='127.0.0.1' port='11112'>
<local address='127.0.0.1' port='22222'/>
</source>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>
QEMU call:
-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222
Notice the xml "local" entry becomes the "localaddr" for the qemu call.
reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When looking up a domain, we try to look up by ID, UUID and NAME
consequently while not really caring which of those lookups succeeds.
The problem is that if any of them fails, we dispatch the error from the
driver and that means setting both threadlocal and global error. Let's
say the last lookup (by NAME) succeeds and resets the threadlocal error as any
other API does, however leaving the global error unchanged. If the underlying
virsh command does not succeed afterwards, our cleanup routine in
vshCommandRun ensures that no libvirt error will be forgotten and that's
exactly where this global error comes in incorrectly.
# virsh domif-setlink 123 vnet1 up
error: interface (target: vnet1) not found
error: Domain not found: no domain with matching id 123
This patch also resets the global error which would otherwise cause some
minor confusion in reported error messages.
https://bugzilla.redhat.com/show_bug.cgi?id=1254152
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.
Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.
Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
This patch implements new virsh command, domrename.
Using domrename, it will be possible to rename domain from the virsh shell by
calling virRenameDomain API.
It takes two arguments, current domain name and new domain name.
Example:
virsh # list --all
Id Name State
----------------------------------------------------
- bar shut off
virsh # domrename bar foo
Domain successfully renamed
virsh # list --all
Id Name State
----------------------------------------------------
- foo shut off
virsh #
Signed-off-by: Tomas Meszaros <exo@tty.sk>
In my previous commit d7f5c88961 I tried to introduce support
for inbound.floor. But the code change was incomplete. This is
the change needed to fully enable the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6983d6d2 tried to improve parseRateStr but broke the build
instead for compilers that were not able to properly introspect the for
loop indexed by the enum resulting into the following error:
virsh-domain.c: In function 'parseRateStr':
virsh-domain.c:916:13: error: 'field_name' may be used uninitialized in this function [-Werror=maybe-uninitialized]
vshError(ctl, _("malformed %s field"), field_name);
^
virsh-domain.c:915:13: error: 'tmp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (virStrToLong_ullp(token, NULL, 10, tmp) < 0) {
^
Rather than trying to fix the code, refactor the function again by
reusing virStringSplit.
We have a function parseRateStr() that parses --inbound and
--outbound arguments to both attach-interface and domiftune.
Now that we have all virTypedParams macros needed for QoS,
lets parse even floor attribute. The extended format for the
arguments looks like this then:
--inbound average[,peak[,burst[,floor]]]
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function is used to parse a tuple delimited by commas into
virNetDevBandwidth structure. So far only three out of fore
fields are supported: average, peak and burst. The single missing
field is floor. Well, the parsing works, but I think we can do
better. Especially when we will need to parse floor too in very
close future.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1250287
When run domfsinfo in quiet mode, we cannot get any
useful information (just get \n), this is because
we didn't use vshPrint to print useful information.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reuse the vshBlockJobWait infrastructure to refactor cmdBlockCommit to
use the common code. This additionally fixes a bug when working with
new qemus, where when doing an active commit with --pivot the pivoting
would fail, since qemu reaches 100% completion but the job doesn't
switch to synchronized phase right away.
Introduce helper function that will provide logic for waiting for block
job completion so the 3 open coded places can be unified and improved.
This patch introduces the whole logic and uses it to fix
cmdBlockJobPull. The vshBlockJobWait function provides common logic for
block job waiting that should be robust enough to work across all
previous versions of libvirt. Since virsh allows passing user-provided
strings as paths of block devices we can't reliably use block job events
for detection of block job states so the function contains a great deal
of fallback logic.
Use the VSH_EXCLUSIVE_OPTIONS to exclude combinations of --pivot and
--keep-overlay and refactor the enforcing of the --wait option and other
flags that imply --wait.
Use the VSH_EXCLUSIVE_OPTIONS_VAR to interlock incompatible options.
Since a variable named 'abort' would conflict with older compilers use
VSH_EXCLUSIVE_OPTIONS for the --abort option.
There's this condition:
flags & VIR_DOMAIN_AFFECT_CURRENT && virDomainIsActive(dom)
which can never be true since VIR_DOMAIN_AFFECT_CURRENT has hardcoded
value of zero. Therefore virDomainIsActive() is a dead code. However,
the condition could make sense if it is rewritten as the following:
!(flags & VIR_DOMAIN_AFFECT_CONFIG) && virDomainIsActive(dom)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '81dd81e' caused a regression when attempting to print a
specific vcpuid that is out of the range of the maximum vcpus for
the guest, such as:
$ virsh vcpupin $dom 1000
VCPU: CPU Affinity
----------------------------------
$
Rather than just recover the old message, let's adjust the message based
on what would be displayed for a similar failure in the set path, such as:
$ virsh vcpupin $dom 1000
error: vcpu 1000 is out of range of persistent cpu count 2
$ virsh vcpupin $dom 1000 --live
error: vcpu 1000 is out of range of live cpu count 2
$
Signed-off-by: Luyao Huang <lhuang@redhat.com>
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The address elements are all unsigned integers, so we should
use the appropriate print directive when printing it.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The SCSI address element attributes bus, target, and unit are expected
to be positive values, so make sure no one provides a negative value since
the value is stored as an unsigned.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
When the block job would fail while watching it using the "--wait"
option for blockcopy, virsh would rather unhelpfully report:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 4096 --verbose --wait
Now in mirroring phase
Add a special case when the block job vanishes while waiting for it to
finish to improve the message:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 8192 --verbose --wait
error: Block Copy unexpectedly failed
Add `virsh migrate' option `--migrate-disks' that allows CLI user to
explicitly specify block devices to migrate.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When watching a job (save, managedsave, dump, migrate) virsh spawns a
thread to call the appropriate API and waits for the result while
watching for interruption signals (SIGINT, Ctrl-C on the terminal).
Whenever such signal is caught, virsh calls virDomainAbortJob, stops
waiting for the job, and returns the result of virDomainAbortJob.
This is wrong because the job might have finished in the meantime or it
might have been cancelled by someone else and virsh would just report
the failure to abort the job. However, we are not interested in the
virDomainAbortJob's result at all, we need to keep waiting for the main
job to finish and report its result instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1131755
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.
We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.
vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.
Replace more than 30 ad-hoc error messages with a single, generic one
that contains the name of the option being processed and some hints
to help the user understand what could have gone wrong.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207043
When parsing a cpulist, the virBitmapParse is used. On an invalid
bitmap an error is reported, but the error gets cleared
immediately by subsequent public APIs call, e.g. virDomainFree().
Moreover, we don't check whether bitmap fits into maximal CPU ID
on the host. Therefore the following examples failed without any
error:
# virsh vcpupin test3 1 aaa
# virsh vcpupin test3 1 1000
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The --maximum option wasn't properly parsed and the equivalent flag
wasn't set. Fix this bug and also rewrite the way we check this option
by using new macro. The new approach is that --maximum requires
--config, no other combination is allowed, because they don't make sense.
The new error will be:
# virsh setvcpus test --maximum 10
error: Option --config is required by option --maximum
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1204033
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1161617
Add command to allow adding and removing IOThreads from the domain including
the configuration and live domain.
$ virsh iothreadadd --help
NAME
iothreadadd - add an IOThread to the guest domain
SYNOPSIS
iothreadadd <domain> <id> [--config] [--live] [--current]
DESCRIPTION
Add an IOThread to the guest domain.
OPTIONS
[--domain] <string> domain name, id or uuid
[--id] <number> iothread for the new IOThread
--config affect next boot
--live affect running domain
--current affect current domain
$ virsh iothreaddel --help
NAME
iothreaddel - delete an IOThread from the guest domain
SYNOPSIS
iothreaddel <domain> <id> [--config] [--live] [--current]
DESCRIPTION
Delete an IOThread from the guest domain.
OPTIONS
[--domain] <string> domain name, id or uuid
[--id] <number> iothread_id for the IOThread to delete
--config affect next boot
--live affect running domain
--current affect current domain
Assuming a running $dom with multiple IOThreads assigned and that
that the $dom has disks assigned to IOThread 1 and IOThread 2:
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadadd $dom 1
error: invalid argument: an IOThread is already using iothread_id '1' in iothreadpids
$ virsh iothreadadd $dom 1 --config
error: invalid argument: an IOThread is already using iothread_id '1' in persistent iothreadids
$ virsh iothreadadd $dom 4
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
4 0-3
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadadd $dom 4 --config
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
4 0-3
Assuming the same original configuration
$ virsh iothreaddel $dom 1
error: invalid argument: cannot remove IOThread 1 since it is being used by disk 'vde'
$ virsh iothreaddel $dom 3
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
virDomainGetJobStats is able to report statistics of a completed
migration, however to get usable downtime and total time statistics both
hosts have to keep synchronized time. To provide at least some
estimation of the times even when NTP daemons are not running on both
hosts we can just ignore the time needed to transfer a migration cookie
to the destination host. The result will be also inaccurate but a bit
more predictable. The total/down time will just be at least what we
report.
https://bugzilla.redhat.com/show_bug.cgi?id=1213434