With the recent changes, virQEMUCapsGetDefaultEmulator() has
become a trivial wrapper around this function, as well as its
only caller. Clean up the situation by merging the two.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
On a machine where no QEMU binary is installed, we end up logging
libvirtd: Cannot check QEMU binary /usr/libexec/qemu-kvm:
No such file or directory
which is not very useful in general, and downright misleading in
the case of operating systems that are not derived from RHEL.
This is a consequence of treating that specific path in a different
way from all other possible QEMU binary paths, and specifically of
not checking whether the file actually exists but sort of assuming
that it must do if we haven't found another QEMU binary earlier.
Address the issue by trying this path out in
virQEMUCapsFindBinaryForArch(), along with all the other possible
ones, and making sure it exists before returning it.
Reported-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
If we get to the bottom of the function we know that none of the
attempts to locate a QEMU binary has been successful, so we can
simply return NULL directly.
This makes it unnecessary variable used to store the path, for
which we can use a more descriptive name.
Lastly, comparing with NULL explicitly is somewhat uncommon in
libvirt and more verbose than the equivalent implicit comparison,
so get rid of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
The 'debuglogs' knowledge base page has way more info and examples on
how to set logging use it instead of the ad-hoc examples.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use backticks to force monospace font instead of double quotes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The top level heading didn't contain the word 'port'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Fix the referenced anchor in 'formatdomain.rst' right away.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The first sentence was moved up a paragraph to stop treating the first
sub-heading as a page subtitle.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Instead of creating an empty object and then setting keys one
at a time, it is possible to pass a dict object to
configuration_data(). This is nicer because it doesn't require
repeating the name of the cfg_data object over and over.
There is one exception: the 'conf' object, where we store values
that are used directly by C code. In that case, using a dict
object is not feasible for two reasons: first of all, replacing
the set_quoted() calls would result in awkward code with a lot
of calls to format(); moreover, since code that modifies it is
sprinkled all over the place, refactoring it would probably
make things more complicated rather than simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The default values used by the library are determined at configure
time based on a number of factors, and we should reflect them in
the installed configuration file to make the comments it contains
more useful.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/263
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the workaround is specific to macOS, only disable compiler
warnings when building on that platform.
While at it, update the comment to reflect the fact that the
workaround is needed for all versions of the OS, including the
modern ones that we currently target.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recent refactor (v8.1.0-217-ga193f4bef6) generalized job related enums
and functions by changing "qemu" prefix to "vir" and moving them to
src/hypervisor/domain_job.[ch]. This was in most cases a good thing, but
async job phases are driver specific and the corresponding functions
remained in src/qemu/qemu_domainjob.[ch], but still their prefix was
changed to "vir". Let's change it back to "qemu".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Document either my contributions or commits I helped review for
the upcoming release.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
I've came across an aarch64 system which supports hugepages up to
16GiB of size. However, I was unable to allocate them using
virsh allocpages. This is because cmdAllocpages() uses
vshCommandOptScaledInt(), which scales passed value into bytes,
but since the virNodeAllocPages() expects size in KiB the
variable holding bytes is then divided by 1024. However, the
limit for the biggest value passed to vshCommandOptScaledInt() is
UINT_MAX which is now obviously wrong, as it needs to be UINT_MAX
* 1024.
The same bug is in completer. But here, let's use ULLONG_MAX so
that we don't have to care about it anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While commit a5e659f0 removed the restriction against multiple queues
for the vdpa net device, there were some missing pieces. Configuring a
device statically and then starting the domain worked as expected, but
hotplugging a device didn't have the expected multiqueue support
enabled. Add the missing bits.
Consider the following device xml:
<interface type="vdpa">
<mac address="00:11:22:33:44:03" />
<source dev="/dev/vhost-vdpa-0" />
<model type="virtio" />
<driver queues='2' />
</interface>
Without this patch, hotplugging the above XML description resulted in
the following:
{"execute":"netdev_add","arguments":{"type":"vhost-vdpa","vhostdev":"/dev/fdset/0","id":"hostnet1"},"id":"libvirt-392"}
{"execute":"device_add","arguments":{"driver":"virtio-net-pci","netdev":"hostnet1","id":"net1","mac":"00:11:22:33:44:03","bus":"pci.5","addr":"0x0"},"id":"libvirt-393"}
With the patch, hotplugging results in the following:
{"execute":"netdev_add","arguments":{"type":"vhost-vdpa","vhostdev":"/dev/fdset/0","queues":2,"id":"hostnet1"},"id":"libvirt-392"}
{"execute":"device_add","arguments":{"driver":"virtio-net-pci","mq":true,"vectors":6,"netdev":"hostnet1","id":"net1","mac":"00:11:22:33:44:03","bus":"pci.5","addr":"0x0"},"id":"libvirt-393"}
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2024406
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In 0895a0e, it was noted that the "sockets" value in the topology
section of capabilities reflects not the number of sockets per NUMA
node, not the total number.
Unfortunately, the fix was applied to the wrong place: the domain XML
format documentation, not that for the capabilities output. And, in
fact, the domain XML interprets "sockets" as the total number, not a
per-node value.
Back out this change in favour of a note in the capabilities
documentation instead.
Fixes: 0895a0e75d
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
The callback ID can be zero, not necessarily positive; correct the
comment to reflect this.
Signed-off-by: John Levon <levon@movementarian.org>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When changing the size of pipe that virFileWrapperFdNew() creates
we start at 1MiB and if that fails because it's above the system
wide limit we get EPERM and continue with half of the size.
However, we might get another error in which case we should
report proper system error and return failure from
virFileWrapperFdNew().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
