Now that only supported version of VirtualBox is 7.0.x the code
that supports older versions can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
According to VirtualBox download page [1] the support for version
6.1.x was terminated a year ago. Drop support for it.
1: https://www.virtualbox.org/wiki/Download_Old_Builds_6_1
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
If initialization of VBOX fails inside of _pfnInitialize an
negative value is returned to signal an error condition to a
caller but no error message is printed out. Reporting an error
may shed more light into why VBOX failed to initialize.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When attempting to restore a saved image, the check for a valid save image
format does not occur until the qemu process is about to be executed. Move
the check earlier in the restore process, along with the other checks that
verify a valid save image header.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split the reading of libvirt's save image metadata from the opening
of the fd that will be passed to QEMU. This allows improved error
handling and provides more flexibility users of qemu_saveimage.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainObjRestore is the only caller of qemuSaveImageOpen that
requests an unlink of a corrupted save image. Provide a function to
check for a corrupt image and move unlinking it to qemuDomainObjRestore.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We previously added a sysusers file, but missed the 'libvirt' group.
This group is referenced in the polkit rules, so we should be
registering that too. It must be done in a separate sysusers file,
however, since it is common to all daemons.
Fixes: a2c3e390f7bedf36f4ddc544d09fe3b8772c5c6f
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ever since its introduction, g_string_replace() has received
various bugfies and improvements, e.g.:
0a8c7e57a g_string_replace: Don't replace empty string more than once per location
b13777841 g_string_replace: Document behaviour of zero-length match pattern
e8517e777 remove quadratic behavior in g_string_replace
c9e48947e gstring: Fix a heap buffer overflow in the new g_string_replace() code
to name a few. Sync our implementation with the one from current
main branch of glib. Some code style adjustments have been made
to match our coding style.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainDiskByName() can return a NULL pointer on failure.
But this returned value in qemuSnapshotDeleteValidate is not checked.It will make libvirtd crash.
Signed-off-by: kaihuan <jungleman759@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Provide a proper user facing error when attempting to query block
I/O throttling settings for an empty drive. Without this patch, a less
meaningful internal error produced by qemuMonitorJSONBlockIoThrottleInfo
would be propagated to the user.
Signed-off-by: Fabian Leditzky <fabian@ldsoft.dev>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since we supported 'product' parameter for SCSI, just expanded existing
solution makes IDE/SATA parameter works too. QEMU requires parameter 'model'
in case of IDE/SATA (instead of 'product'), so the process of making JSON
object is slightly modified. Length of the 'product' parameter is
different in SCSI (16 chars) and ATA/SATA (40 chars).
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/697
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When snapshot is created with disk-only flag it is always external
snapshot without memory state. Historically when there was not support
to revert external snapshots this produced error message.
error: Failed to revert snapshot s1
error: internal error: Invalid target domain state 'disk-snapshot'. Refusing snapshot reversion
Now we can simply consider this as reverting to offline snapshot as the
possible damage to file system is already done at the point of snapshot
creation.
Resolves: https://issues.redhat.com/browse/RHEL-21549
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This directory might not exist on systems not supporting old SystemV interfaces.
Signed-off-by: Bronek Kozicki <brok@incorrekt.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
By removing the unnecessary spaces, the behavior is aligned with
`virsh list --all --name` and `virsh net-list --all --name`.
Without this change, one can't do something like the following easily:
`virsh pool-list --all --name | xargs -I {} virsh pool-start \"{}\"`
as no pool `"foo "` (with all the spaces) actually exist.
Although the removed comment states that the additional spaces were kept
to maintain backwards compatibility, the commit [0] and the old behavior
are from 2010 when libvirt was at version 0.8.1. For the sake of sanity,
the behavior should be aligned with other parts of the CLI.
[0] 415b14903e
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add nanoseconds units for vcpu.delay doc, as it's based on
'/proc/<pid>/task/<tid>/schedstat' (see 'qemuGetSchedstatDelay()').
'schedstat' is in nanoseconds, according to
https://docs.kernel.org/scheduler/sched-stats.html#proc-pid-schedstat.
Signed-off-by: aadmi <aadmi@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The VM private data will be used in a sub-sequent patch. To minimize
churn, refactor the function before changing the logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Per our supported platforms the minimum available versions are:
CentOS Stream 9: 2.68.4
Debian 11: 2.66.8
Fedora 39: 2.78.6
openSUSE Leap 15.6: 2.78.6
Ubuntu 22.04: 2.72.4
FreeBSD ports: 2.80.5
macOS homebrew: 2.82.4
macOS macports: 2.78.4
Bump to 2.66 which is limited by Debian 11. While ideally we'd bump to
2.68 which would give us 'g_strv_builder' and friends 2.66 is enough for
g_ptr_array_steal() which can be used to emulate the former with almost
no extra code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since the empty file with a .base64 value wasn't recognized during the loading
process (starting of libvirtd), attempting to get a value for the UUID resulted
in an undefined error. This patch resolves the issue by checking the size of
the file and ensuring that the stored value is as expected (NULL).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Adam Julis <ajulis@redhat.com>
There's a call to read() in the file but corresponding include of
unistd.h is missing causing a build failure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When a migration with non-shared storage is started with
VIR_MIGRATE_PARAM_BANDWIDTH set, it will be applied to both memory
migration and each block job started for storage migration. Once the
migration is running virDomainMigrateSetMaxSpeed may be used to change
the bandwidth used by memory migration, but there was no way of changing
storage migration speed. Let's allow virDomainBlockJobSetSpeed during
migration to enable the missing functionality.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new VIR_MIGRATE_PARAM_BANDWIDTH_AVAIL_SWITCHOVER parameter can be
used to override the estimated bandwidth that can be used for
transferring guest memory and device state once virtual CPUs are
stopped.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that meson ensures these directories always exist, we can
move them to the daemon-common package where they belong.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All loadable modules should depend on the daemon-common package.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently the directories that are searched for each possible
kind of loadable module are created as a side effect of
installing the corresponding module, which means that their
availability depends on the exact list of features that have
been enabled.
Create them explicitly ahead of time instead, ensuring
consistency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement domainInterfaceAddresses for the Cloud Hypervisor driver.
Support VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_LEASE and
VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_ARP sources. Implementation is
similar to other drivers.
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement `virCHProcessEvent` that maps event string to corresponding
event type and take appropriate actions. As part of this, handle the
shutdown event by correctly updating the domain state. This change also
facilitates the handling of other VM lifecycle events, such as booting,
rebooting, pause, resume, etc.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement `chReadProcessEvents` and `chProcessEvents` to read events from
event monitor FIFO file and parse them accordingly.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Co-authored-by: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use a FIFO(named pipe) for --event-monitor option in CH. Introduce a new
thread, `virCHEventHandlerLoop`, to continuously monitor and handle
events from cloud-hypervisor.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Co-authored-by: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The `--event-monitor` option in cloud-hypervisor outputs events to a
specified file. This file can then be used to monitor VM lifecycle,
other vmm events and trigger appropriate actions.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Co-authored-by: Vineeth Pillai <viremana@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of my historical libvirt contributions are PowerPC related but at
this moment I'm working with RISC-V enablement (mostly on the QEMU
side).
Feel free to reach out for RISC-V related matters w.r.t libvirt and
QEMU-KVM support.
Suggested-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The 'aia' feature is added as a machine type option for the 'virt'
RISC-V machine, e.g. "-machine virt,aia=<val>".
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This feature is implemented as a string that can range from "none",
"aplic" and "aplic-imsic".
If the feature isn't present in the domain XML the hypervisor default
will be used. For QEMU, at least up to 9.2, the default is "none".
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
AIA (Advanced Interrupt Architecture) support was introduced in QEMU 7.0
for the 'virt' machine type. It allows the guest to choose from a more
modern interrupt model than the default (CLINT - Core Logical Interrupt
Controller).
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The correct compiler define to detect the RISC-V architecture is __riscv.
Fixes: b902cfece0db ("virsysinfo: Try reading DMI table")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let us introduce the xml and reply files for QEMU 10.0.0 on s390x.
Notable changes:
- new s390-ccw-virtio-10.0 machine type
- old machine types (2.4 - 2.8) dropped
- new CPU models
- New devices:
- virtio-mem-ccw
- chardev now supports qemu-vdagent
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a migration is canceled very late once virtual CPUs are already
stopped, QEMU will automatically resume them. If this happens after we
exited a waiting loop in qemuMigrationSrcWaitForCompletion, but before a
loop that tries to make sure CPUs are stopped by waiting for the
appropriate event, we may end up waiting forever because the CPUs are
running (they were resumed by migrate_cancel), but the STOP event is
already gone.
This is possible because we enter monitor for fetching migration
statistics at which point other APIs can be processed and migration may
change its state. We should recheck the state when we get back from the
monitor code.
https://issues.redhat.com/browse/RHEL-52493
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Inactive domain XML can be wildly different to the live XML. For
instance, it can have VSOCK CID of that from another (running)
domain. Since domain status is not checked for, attempting to ssh
into an inactive domain may in fact result in opening a
connection to a different live domain that listens on said CID
currently.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/737
Resolves: https://issues.redhat.com/browse/RHEL-75577
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
JSON parser isn't called when reading empty files so `jerr` will be used
uninitialized in the original code. Empty files appear when a network
has no dhcp clients.
This patch checks for such files and skip them.
Fixes: a8d828c88bbdaf83ae78dc06cdd84d5667fcc424
Signed-off-by: Jiang XueQian <jiangxueqian@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
