As coredump function is to make a vmcore for crash tool to analyze,
in order not to introduce a big thing in integration, we just check
if ch-remote command runs no error report here.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
From the logs it appears that booting the VM to the point at which it
can signal to the host can sometimes take longer than then 30 seconds
specified.
Fixes: #4136
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The current patch fixes the following error that was raised by clippy:
error: this let-binding has unit value
--> tests/integration.rs:6538:13
|
6538 | / let _ = stdin
6539 | | .write_all("type=7".as_bytes())
6540 | | .expect("failed to write stdin");
| |_________________________________________________^
|
= note: `-D clippy::let-unit-value` implied by `-D warnings`
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#let_unit_value
help: omit the `let` binding
|
6538 ~ stdin
6539 + .write_all("type=7".as_bytes())
6540 + .expect("failed to write stdin");
|
error: could not compile `cloud-hypervisor` due to previous error
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In this way, we can cover a broad range of events from the event monitor
while avoiding code duplication.
Fixes: #4054
Signed-off-by: Bo Chen <chen.bo@intel.com>
This prevents a conflict since the old API socket will not have been
cleaned up (due to the use of SIGKILL.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Live upgrade is currently not guaranteed during this development cycle
and we will try to enable these tests after the next release.
Signed-off-by: Bo Chen <chen.bo@intel.com>
By augmenting existing set of tests, this patch added a set of
tests for live-upgrade that covers use cases with NUMA,
vhost-user (OVS-DPDK), and local-migration.
Fixes: #3949
Signed-off-by: Bo Chen <chen.bo@intel.com>
We modified a test case to workaround the RAM calculation error caused
by hidding 4MiB memory for UEFI. Now change it back to normal.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Now that address translations performed by virtio-iommu can error out if
the address can't be translated, we uncovered an issue in integration
test aarch64_acpi::test_virtio_iommu.
We disable the test until we can investigate and fix the root cause.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The extra vDPA device in the test is hotplugged behind the vIOMMU, which
covers the use case of placing a vDPA device behind a virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As reported by the periodic CI runs, it may take more time for the NVMe
device to present in the guest after being hotplugged as a VFIO user
device on `aarch64` (especially under high load). Let's increase the
timeout after device hotplug from `1s` to `10s` to increase the test
stability.
Fixes: #3495
Signed-off-by: Bo Chen <chen.bo@intel.com>
Compile this feature in by default as it's well supported on both
aarch64 and x86_64 and we only officially support using it (no non-acpi
binaries are available.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
It seems the vdpa_sim_block isn't behaving properly after the vhost
device is closed, as it sometimes returns EBUSY when we try to open it
again. The easiest way to deal with this issue is by simplifying the
integration test, avoid to plug the same device after it's been
unplugged.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Disable the DAX feature from the virtio-fs implementation as the feature
is still not stable. The feature is deprecated, meaning the 'dax'
parameter will be removed in about 2 releases cycles.
In the meantime, the parameter value is ignored and forced to be
disabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The test is sporadically failing whenever we try to hotplug the vDPA
device we've just unplugged. This is causing the kernel to complain with
EBUSY because the device hasn't been released yet. This is happening
because the CI system is under very high load, therefore taking quite
some time to the host to update the state of this device.
The easy way to fix such issue is by increasing the sleep time between
the unplug and the replug.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Ensure devices that are specified to be on a PCI segment that is behind
the IOMMU are IOMMU enabled if possible or error out for those devices
that do not support it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Adding two new integration tests for vDPA, relying on both block and net
simulators from the host kernel.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In this way, we can cover local-migration with dpdk in our regular CI,
to prevent similar regressions reported and fixed by #3657.
Fixes: #3659
Signed-off-by: Bo Chen <chen.bo@intel.com>
Introducing a new integration test relying on the virtio-balloon ability
to free host pages that have been reported as freed by the guest.
This test checks that after consuming a lot of RAM in the guest, the VMM
process is able to releases the pages reported by the guest. Simply done
by checking the RSS associated with the VMM's process follows the memory
trend in the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In this way, we allows to reuse the struct `Guest` with kernel paths and
kernel commands (e.g. hardcoded constants) that are tests-specific.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Instead of using hardcoded firmware paths inside the `Guest` struct
constructor, this commit removes `fw_path` related code paths from the
`Guest` struct and asks each test constructs its firmware path
explicitly. This allows better flexibility for the `Guest` struct so
that it can be reused for the performance tests we are adding soon.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Now that multiple file descriptors can be provided along with add-net,
that means we can hotplug a multiqueue macvtap interface to the VM.
The common macvtap test is updated, meaning that both coldplug and
hotplug codepath now use multiqueue.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add integration tests for "pmu=on". It depends on checking if there
is "arm-pmu" item in "/proc/interrupts". As PMU info has not been added
to ACPI, the tests are only for dt.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
As it might take more time for the VM to boot (especially under high
load) when using the firmware, let's increase the timeout waiting for
the VM to be reachable.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Both OVMF and RHF firmwares triggered an error when O_DIRECT was used
because they didn't align the buffers to the block sector size.
In order to prevent regressions, we're adding a new test validating the
VM can properly boot when the OS disk is opened with O_DIRECT and booted
from the rust-hypervisor-fw.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Update documentation and CI to rely on the new CLOUDHV.fd firmware built
from the newly introduced target CloudHvX64.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
error: this boolean expression can be simplified
--> tests/integration.rs:3755:33
|
3755 | assert!(!(empty > 5), "No login on pty");
| ^^^^^^^^^^^^ help: try: `empty <= 5`
|
= note: `-D clippy::nonminimal-bool` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#nonminimal_bool
error: unneeded late initalization
--> tests/integration.rs:7619:13
|
7619 | let mut success;
| ^^^^^^^^^^^^^^^^
|
= note: `-D clippy::needless-late-init` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `success` here
|
7621 | let mut success = if let Some(status) = send_migration
| +++++++++++++++++
help: remove the assignments from the branches
|
7625 ~ status.success()
7626 | } else {
7627 ~ false
|
help: add a semicolon after the `if` expression
|
7628 | };
| +
error: unneeded late initalization
--> tests/integration.rs:7838:13
|
7838 | let mut success;
| ^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `success` here
|
7840 | let mut success = if let Some(status) = send_migration
| +++++++++++++++++
help: remove the assignments from the branches
|
7844 ~ status.success()
7845 | } else {
7846 ~ false
|
help: add a semicolon after the `if` expression
|
7847 | };
| +
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When enabling the `mshv` feature, we skip quite some tests and
hence have known dead-code. This annotation silences dead-code
related warnings for our quality workflow to pass.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Given integration tests are placed in a dedicate directory, they don't
need annotations (e.g. `#[cfg(integration_test)]` and `#[cfg(test)]`) or
defining `test mod` to exclude themselves from the common compilation
process.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The test test_virtio_block_topology is flaky on aarch64, let's disable
it until we find the right way to fix it.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This test relies on using losetup with a block size to create a block
device from a file that has a specific block size for the topology
detection code to pick up and passthrough to the guest.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This time we use the Rust Hypervisor Firmware for test_vfio_user() in
order to fix the systemd issues we've seen so far.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit enhances the integration test for multiple PCI segments
by:
(1) Enables the `test_virtio_fs_multi_segment` on AArch64.
(2) Adds a new integration test case for both x86_64 and AArch64 using
the direct kernel boot to test virtio-disk multiple PCI segments.
The test case does:
- Start a VM using direct kernel boot with 16 PCI segments and assign
the last PCI segment with a virtio-disk device.
- Check if the number of PCI host bridges equals to 16 after VM boots.
- Mount the virtio-disk device on the last PCI segment to the rootfs
and write/read data to the virtio-disk device.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Extending the test_simple_launch() integration test to validate Cloud
Hypervisor boots correctly with both rust-hypervisor-fw and OVMF on
x86_64 platforms.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Bumping the OVMF binary version along with UEFI documentation to
reflect the latest set of patches on top of tianocore/edk2 'master'
branch, which can be found on the Cloud Hypervisor fork on 'ch' branch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Commit ac25172176 bumps the rust
version of virtiofsd named `virtiofsd-rs`, which causes a warning
```
warning: use of deprecated parameter '--socket':
Please use the '--socket-path' option instead.
```
This commit updates the cmdline parameter accordingly.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This test is flaky (#3400) while we are experiencing a bug of using the latest
SPDK/NVMe backend as VFIO user device (#3401). Let's disable this test
before we fix the above two issues.
Signed-off-by: Bo Chen <chen.bo@intel.com>
For now we only enable the vfio-user test on x86_64 platform, as we have
a known hanging issue to resovle on the aarch64 platform.
Fixes: #3098
Signed-off-by: Bo Chen <chen.bo@intel.com>
This new integration test validates the vCPUs are running on the
expected set of CPUs on the host.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The elements of a list should be using commas as the correct delimiter
now that it is supported. Deprecate use of colons as delimiter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Refactor the existing virtio fs test to support controlling the PCI
segment the device should be added to and use this for a multiple
segment test.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Refactor the existing net hotplug test to support controlling the PCI
segment the device should be added to and use this for a multiple
segment test.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Refactor the existing pmem hotplug test to support controlling the PCI
segment the device should be added to and use this for a multiple
segment test.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
On AArch64, device hotplug can be enabled with ACPI. Therefore,
this commit enables the hotplug test case for following devices:
- PCI bar reprogramming
- virtio-disk
- virtio-net
- macvtap
- virtio-vsock
- virtio-pmem: Works with the latest reference kernel
- virtio-fs: Works with the latest reference kernel
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Currently vfio and nested virtualization is not used on AArch64,
and SGX is a x86_64 only feature. Therefore this commit adds the
architecture gates for helper functions related to vfio, SGX, and
nested virtualization to mute warnings when building tests on the
AArch64 platform.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Memory hotplug and virtio_balloon works on arm64 with:
- memory hotplug: An updated kernel using ACPI
- virtio balloon: `stress` installed in the cloud image
Therefore, we can enable test cases for them in integration test.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
On MSHV some of the integration test cases are not supported yet
or still in progress. This patch disables all those test cases.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Adding some bits to the existing live migration test with NUMA in order
to properly validate virtio-mem works with live migration.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Refactored the test case `test_virtio_iommu` to adapt architectures and
different choices among ACPI and FDT. In the case of ACPI, a Focal image
with modified kernel is tested.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Adding the snapshot/restore support along with migration as well,
allowing a VM with a virtio-balloon device attached to be properly
migrated.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
For AArch64, now virtual IOMMU is only tested on FDT, not ACPI.
In the case of FDT, the behavior of IOMMU is a bit different with ACPI.
All the devices on the PCI bus will be attached to the virtual IOMMU,
except the virtio-iommu device itself. So these devices will all be
added to IOMMU groups, and appear in folder '/sys/kernel/iommu_groups/'.
The result is, on AArch64 IOMMU group '0' contains "0000:00:01.0" which
is the console device. But on X86, console device is not attached to
IOMMU. So the IOMMU group '0' contains "0000:00:02.0" which is the first
disk.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This patch adds a separate function to launch two guest VMs and ensure
they are connected through ovs-dpdk, so that we can reuse this function
in other tests, e.g. the test for live-migration with ovs-dpdk.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Currently we need to test both device tree and ACPI on AArch64. As
the number of ACPI test cases is gradually increasing and expected
to increase in the future, it is better to extract all ACPI test
cases on AArch64 to a single module.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This patch adds a separate function to perform common numa checks, so
that we can reuse this function in other tests, e.g. the test for
live-migration with numa.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This test exercises the local live-migration between two Cloud
Hypervisor VMs on the same host. It ensures the following behaviors:
1. The source VM is up and functional (including various virtio-devices
are working properly);
2. The 'send-migration' and 'receive-migration' command finished
successfully;
3. The source VM terminated gracefully after live migration;
4. The destination VM is functional (including various virtio-devices
are working properly) after live migration.
Note: This test does not use vsock as we can't create two identical
vsock on the same host.
Fixes: #2965
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch adds a dedicate function to include the common checks on the
virtio-devices from the 'test_snapshot_restore' test, which will also be
reused for the upcoming 'test_live_migration' test.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Two tests for booting Linux cloud image from the different VHDx files:
fixed and dynamic. Another test for testing the dynamic expansion of a
generated VHDx file.
Signed-off-by: Fazla Mehrab <akm.fazla.mehrab@intel.com>
This commit adds an AArch64-only integration test case called
`test_guest_numa_nodes_dt` so that it is possible to test the
NUMA for the FDT on AArch64 platform.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
AArch64 CPU topology can be described using either device tree or
ACPI. Therefore, the integration test should also cover the AArch64
ACPI CPU topology tests.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Now that vhost-user supports being snapshot and restored, we extend the
existing test_ovs_dpdk to validate snapshot/restore feature works as
expected.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The existing test_macvtap is factorized to be able to support both
coldplug and hotplug of a macvtap interface through virtio-net. Adding
the new test_macvtap_hotplug test allows for validating that sending a
TAP file descriptor through control message along with the add-net
command works.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
To help with readability, we rely on exec_host_command_status() from the
macvtap test, which replaces the former "bash -c ..." syntax.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to uniquely identify each SGX EPC section, we introduce a
mandatory option `id` to the `--sgx-epc` parameter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The output from getty ("login:") does not always appear. This can be
observed interactively when booting the VM. (Mashing return will bring
it up.) Instead of checking for that string to ensure the VM has booted
instead check for a message from systemd to say it has started the SSH
daemon.
Fixes: #2799
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
AArch64 tests were divided into 2 steps:
- Build and test with 'acpi' feature
- Build and test without 'acpi'
This can be optimized. We need only to build and test once with default
features ('acpi' is enabled).
On AArch64, ACPI only works with UEFI. If UEFI is not available, guest
kernel fall back to use FDT. Most AArch64 test cases boot from direct
kernel, the guest will keep using FDT even if ACPI is enabled. So
nothing is broken.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Issue from beta verion of clippy:
Error: --> vm-virtio/src/queue.rs:700:59
|
700 | if let Some(used_event) = self.get_used_event(&mem) {
| ^^^^ help: change this to: `mem`
|
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
Signed-off-by: Bo Chen <chen.bo@intel.com>
The virtio_balloon test is a bit flaky since we can't really know how
much the balloon is gonna be deflated when the guest is under memory
pressure. That's why it's safer to simply check that the balloon is not
the initial size anymore.
One small detail, but we don't need to check for the balloon size to be
higher than 0 since the returned value is a u64.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Additionally, he disk creation routine is extended to support NTFS and
variable image size.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
In order to allow a hotplugged vCPU to be assigned to the correct NUMA
node in the guest, the DSDT table must expose the _PXM method for each
vCPU. This method defines the proximity domain to which each vCPU should
be attached to.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The new test_virtio_balloon() is to verify if the 'deflate_on_oom'
parameter works. Its testing result is as follows:
1. Start a 4G guest with 2G balloon, check memory once starts up.
total_mem is 4294967296 bytes
actual_mem is 2147483648 bytes
orig_balloon is 2147483648 bytes
total used free shared buff/cache available
Mem: 3.8Gi 2.1Gi 1.6Gi 0.0Ki 140Mi 1.6Gi
Swap: 0B 0B 0B
2. Run a command in guest to eat up 25G memory, and check again.
total_mem is 4294967296 bytes
actual_mem is 3121610752 bytes
deflated_balloon is 1173356544 bytes
total used free shared buff/cache available
Mem: 3.8Gi 1.2Gi 2.6Gi 0.0Ki 49Mi 2.5Gi
Swap: 0B 0B 0B
From above, we can notice the balloon memory indeed deflates from
2147483648 bytes to 1173356544 bytes once an oom is going to be
triggered.
Signed-off-by: Fei Li <lifei.shirley@bytedance.com>
A new method has been introduced for WindowsGuest, that would poll on
the SSH connection and try to execute a test command. When successfull,
the polling stops and the guest is considered finished boot. The
downside of this method is that the network setup is needed always even
if the test doesn't use network, however it complies with the behavior
of other tests. I also observe a bit more stability on the local test
run, however it still appears to be a resource issue so some sporadic
fails are possible on a slower machine.
The hardcoded timeouts for guest boot and DHCP setup have been removed.
The dnsmasq invocation uses `--bind-dynamic` so then the daemon can be
started while the target interface could be down yet.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Co-authored-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
test_aarch64_pe_boot was added at the very beginning of AArch64 support.
Now it can be combined to test_vmlinux_boot.
Renamed test_vmlinux_boot to test_direct_kernel_boot for generality.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Enabled test case test_vmlinux_boot_noacpi on AArch64 and renamed it
test_direct_kernel_boot_noacpi for generality.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Some new integration tests will require the "stress" binary to be
present in the guest in order to run correctly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Re-enable virtiofsd testing now that issues with capstone repository
have been resolved.
This reverts commit a14c70019a.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new function allows for better readability of the code by
factorizing a few of lines of code into a single one.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It's important to verify the actual exit code returned from the new
function exec_host_command_status() to ensure the command ran
successfully.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new function allows for better readability of the code by
factorizing a bunch of lines of code into a single one.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There's no need for ssh_command_ok() anymore since ssh_command() now
returns an error in case the executed command returned with an exit code
different than 0.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Make sure the reconnection functionaliity is well tested from the OVS
DPDK integration test.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to simplify and speed up the OVS DPDK test, we switch from
using 'iperf3' to 'netcat' to validate the connectivity is functional.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since OVS DPDK deprecated the use for the server mode, let's make sure
the integration test uses the client mode instead. This means the OVS
backend is the client and the VMM acts as the server, therefore the
reason why we use "vhost_mode=server".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Re-enable the OVS DPDK integration test by assigning both VMs to the
NUMA node 0. This ensures the processes are being run on NUMA node 0,
preventing OVS DPDK from abnormal functioning.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The CI is failing due the git server that the submodules required for
this fork of QEMU need to build from is unavailable.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
(cherry picked from commit 2aec0a92a5)
In order to avoid regression regarding OVS-DPDK support, a new
integration test is added. This test consists of running two VMs, both
attached to a distinct OVS port, where both ports are connected to an
OVS bridge. Once the VM are running, the test validates the connection
between the two VMs works correctly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding a new function ssh_command_ok() as a wrapper around the existing
ssh_command() function. The goal being to identify if the command
returned without any error.
This new function allow for a bit of factorization through the codebase.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Yet another small refactoring step for WindowsGuest
after f56471566b.
For this particular case - there's currently neither overloading nor
default argument support in Rust (except a macro or other tricky stuff),
so keep the timeout and other options default for now.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Bump the sleep time before checking the guest RAM size from 10 to 30
seconds. This will help the VFIO baremetal CI passing more consistently.
Fixes#2606
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Re-enable virtiofsd testing now that issues with capstone repository
have been resolved.
This reverts commit 2aec0a92a5.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on dnsmasq running on the host, the Windows guest are now
getting allocated with the expected IP addresses. This allows for
multiple VMs, therefore multiple tests to run in parallel.
The end goal is to reduce the time spent running Windows integration
tests.
Fixes#1891
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new wrapping structure allows for a better factorization of the
Windows specific code. This makes each test simpler and easier to read.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By using a Box around the DiskConfig trait, it becomes Sized. For that
reason, we can pass the DiskConfig to the Guest so that it can own it.
This allows for further simplification as the Guest does not need to be
bound to a specific lifetime, which makes things easier.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Refactor the existing vhost-user-net integration tests in order to
extend it with an extra test for vhost-user client mode.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on guest Ubuntu image 21.04, including a 5.11 kernel, this patch
adds some additional tests to the VFIO baremetal integration tests. It
adds a test for ACPI memory hotplug, another one for virtio-mem memory
hotplug, and finally a test for hotplugging the NVIDIA card.
The existing test already taking care of the reboot has been renamed.
The script running "cargo test" has been modified to run only one thread
at a time, so that each test run sequentially. This is mandatory since
the card can't be shared across multiple VMs.
Fixes#2404
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to support most recent Ubuntu distributions, we must update
the way of detecting a reboot through the journal since there is no
more "-- Reboot --" logs.
Using the `--list-boots` option is the preferred way for getting the
boot count information from journalctl command. We simply need to add 1
to the count in order to get the reboot count.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Moving to latest Ubuntu version as the guest image is needed to move to
more recent guest kernel (5.11). With more recent kernels, we'll be able
to add hotplug and virtio-mem tests to the VFIO baremetal CI.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The CI is failing due the git server that the submodules required for
this fork of QEMU need to build from is unavailable.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
test_reboot became flaky after the refactoring of the VM reboot code.
This is because we removed the ability to specify a custom timeout.
This patch fixes the issue by allowing a custom timeout of 120s to be
set.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Factorize NVIDIA GPU checks into its own function so that it can be
reused.
Factorize linux guest reboot into its own function to reduce the amount
of code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Use the PVH vmlinux for all tests (with the exception of the specific
bzImage test.)
See: #2231
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The new kernel 5.12 requires the devices to be manually bound to
vfio-pci while adding a new_id is only needed once per
device_id:vendor_id pair.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It appears that mshv is not yet there to succeed with these tests. It is
suggested to ignore them and enable later one by one as the
functionality gets fixed.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
We now reply on the value from '/sys/kernel/mm/ksm/shared_pages' to
validate our "--memory mergeable=on|off" option. For `mergeable=on`,
we are expecting to see more 'shared_pages' reported by the kernel when
we start more VMs with this option. For `mergeable=off`, we are
expecting the 'shared_pages' value to be always 0, as we are assuming
the rest of the system (in our CI) is not using mergeable memory.
Fixes: #2138
Signed-off-by: Bo Chen <chen.bo@intel.com>
The MCRS method returns a 64-bit memory range descriptor. The
calculation is supposed to be done as follows:
max = min + len - 1
However, every operand is represented not as a QWORD but as combination
of two DWORDs for high and low part. Till now, the calculation was done
this way, please see also inline comments:
max.lo = min.lo + len.lo //this may overflow, need to carry over to high
max.hi = min.hi + len.hi
max.hi = max.hi - 1 // subtraction needs to happen on the low part
This calculation has been corrected the following way:
max.lo = min.lo + len.lo
max.hi = min.hi + len.hi + (max.lo < min.lo) // check for overflow
max.lo = max.lo - 1 // subtract from low part
The relevant part from the generated ASL for the MCRS method:
```
Method (MCRS, 1, Serialized)
{
Acquire (MLCK, 0xFFFF)
\_SB.MHPC.MSEL = Arg0
Name (MR64, ResourceTemplate ()
{
QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000000000000000, // Range Minimum
0xFFFFFFFFFFFFFFFE, // Range Maximum
0x0000000000000000, // Translation Offset
0xFFFFFFFFFFFFFFFF, // Length
,, _Y00, AddressRangeMemory, TypeStatic)
})
CreateQWordField (MR64, \_SB.MHPC.MCRS._Y00._MIN, MINL) // _MIN: Minimum Base Address
CreateDWordField (MR64, 0x12, MINH)
CreateQWordField (MR64, \_SB.MHPC.MCRS._Y00._MAX, MAXL) // _MAX: Maximum Base Address
CreateDWordField (MR64, 0x1A, MAXH)
CreateQWordField (MR64, \_SB.MHPC.MCRS._Y00._LEN, LENL) // _LEN: Length
CreateDWordField (MR64, 0x2A, LENH)
MINL = \_SB.MHPC.MHBL
MINH = \_SB.MHPC.MHBH
LENL = \_SB.MHPC.MHLL
LENH = \_SB.MHPC.MHLH
MAXL = (MINL + LENL) /* \_SB_.MHPC.MCRS.LENL */
MAXH = (MINH + LENH) /* \_SB_.MHPC.MCRS.LENH */
If ((MAXL < MINL))
{
MAXH += One /* \_SB_.MHPC.MCRS.MAXH */
}
MAXL -= One
Release (MLCK)
Return (MR64) /* \_SB_.MHPC.MCRS.MR64 */
}
```
Fixes#1800.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Since using bzImage is now deprecated, let's update the SGX integration
test to rely on vmlinux instead.
Fixes#2476
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Both changes aim to document the absence of the CPU hot-remove
functionality on Windows.
Closes#2457.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Update the Ubuntu Focal image used as the guest image. It's based on the
latest Focal image released on April 1st 2021, and customized to include
all the utilities we need. As usual, snapd and pollinate services have
been removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Fixes the current codebase so that every cargo clippy can be run with
the beta toolchain without any error.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It must be specified as excluded from the workspace as it must not be
built on non-test targets due to issues with the ssh2 dependency and the
musl toolchain.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This includes:
* OS disk image management
* Cloud init creation
* SSH to guest access
* Waiting for guest to boot
This will be useful in other projects that want to do similar things in
their integration tests.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Relying on a NVIDIA Tesla T4 card present in the SGX machine, this patch
enables baremetal VFIO testing, validated by running several NVIDIA
tools in the guest. The guest image has been prepared to include all the
software needed to run these tests.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Enabled all "ttyS0" related test cases:
- test_serial_off
- test_serial_tty
- test_serial_file
Enabled mandatory guest kernel driver for "ns16550a" on AArch64.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This removes the dependency on "tempdir" which in turn depends on the
large rand dependency chain.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the function can never return an error this is now a clippy failure:
error: this function's return value is unnecessarily wrapped by `Result`
--> virtio-devices/src/watchdog.rs:215:5
|
215 | / fn set_state(&mut self, state: &WatchdogState) -> io::Result<()> {
216 | | self.common.avail_features = state.avail_features;
217 | | self.common.acked_features = state.acked_features;
218 | | // When restoring enable the watchdog if it was previously enabled. We reset the timer
... |
223 | | Ok(())
224 | | }
| |_____^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_wraps
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add the ability for cloud-hypervisor to create, manage and monitor a
pty for serial and/or console I/O from a user. The reasoning for
having cloud-hypervisor create the ptys is so that clients, libvirt
for example, could exit and later re-open the pty without causing I/O
issues. If the clients were responsible for creating the pty, when
they exit the main pty fd would close and cause cloud-hypervisor to
get I/O errors on writes.
Ideally the main and subordinate pty fds would be kept in the main
vmm's Vm structure. However, because the device manager owns parsing
the configuration for the serial and console devices, the information
is instead stored in new fields under the DeviceManager structure
directly.
From there hooking up the main fd is intended to look as close to
handling stdin and stdout on the tty as possible (there is some future
work ahead for perhaps moving support for the pty into the
vmm_sys_utils crate).
The main fd is used for reading user input and writing to output of
the Vm device. The subordinate fd is used to setup raw mode and it is
kept open in order to avoid I/O errors when clients open and close the
pty device.
The ability to handle multiple inputs as part of this change is
intentional. The current code allows serial and console ptys to be
created and both be used as input. There was an implementation gap
though with the queue_input_bytes needing to be modified so the pty
handlers for serial and console could access the methods on the serial
and console structures directly. Without this change only a single
input source could be processed as the console would switch based on
its input type (this is still valid for tty and isn't otherwise
modified).
Signed-off-by: William Douglas <william.r.douglas@gmail.com>
Let's create a fixed VHD disk file from the existing RAW file thanks to
qemu-img, and create a new integration test to validate that
Cloud-Hypervisor can boot VHD disk image.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By using `net_util::open_tap` to create the TAP interface, the created
interface will be deleted when the returned variable (`net_utils::Tap`)
is dropped.
Signed-off-by: Bo Chen <chen.bo@intel.com>
