Commit 271940223c which strived to add
support to use '--uuid' in the table output of 'virsh list' went too far
and also allowed the default table view to be enabled when just '--uuid'
is specified.
This broke the script-friendly output which previously had this format:
$ virsh list --uuid
b6d03c07-86f8-4a57-8719-172a5d0359bb
to this script-unfriendly output:
$ virsh list --uuid
Id Name State UUID
-------------------------------------------------------------
1 ha running b6d03c07-86f8-4a57-8719-172a5d0359bb
Using the human friendly output will still be possible by using:
$ virsh list --table --uuid
Fixes: 271940223c
Closes: https://gitlab.com/libvirt/libvirt/-/issues/666
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a capability dump for 'riscv64' with 'qemu-9.1' release captured
on a x86_64 host as I don't have hardware.
The last dump for riscv64 was done with qemu-8.0 which didn't manifest
the newest features such as CPU type selection and ACPI support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU-9.1 was released so update the capabilities to the final state.
Notable changes:
- Machine types 'pc-q35-6.1' and 'pc-i440fx-6.1' were deprecated
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function can return directly rather than setting 'ret' as there's no
cleanup.
It also doesn't make sense to conditionally compile out the 'break'
statement when checking whether a disk has rawio enabled if
'CAP_SYS_RAWIO' is _not_ defined as the function will still behave the
same.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The 'nfs-utils' package provides 'showmount' used to detect NFS-based
storage pool sources. As the lookup of storage pool sources can fail
gracefully and does so e.g. if the gluster backend is not installed we
can do the same for NFS.
Apart from allowing a tighter footprint when installing libvirt, this
also allows installation of the storage driver core in cases when a
security policy prohibits use of NFS.
Resolves: https://issues.redhat.com/browse/RHEL-56611
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With the new virCommand infrastructure which can find the program in
path automatically we no longer need the build-time detection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
/usr/bin/dtrace has been split from `systemtap-sdt-devel` into
`systemtap-sdt-dtrace`
It's forward and backward compatible to require the dtrace binary
directly.
We still need the latter dep though, for sdt.h in generated
libvirt_probes.h
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
When users pre-create a tap device to use with multiqueue interface that
has `managed="no"`, change the error so that it does not indicate we are
trying to create the device, and on top of that hint at the most
probable error cause.
Resolves: https://issues.redhat.com/browse/RHEL-55749
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function generates *ifname from the get go and most functions do not
wrap the string in a NULLSTR as it is not necessary. The few leftovers
are outliers that are changed to fit the theme better.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
pvpanic-pci is the only reasonable implementation of a panic
device for aarch64/virt guests. Right now we're asking users to
provide the model name manually, but we can be more helpful and
fill it in automatically instead.
With this change, the aarch64-panic-no-model test no longer
fails and so it's no longer useful to us. Instead, we can amend
the aarch64-virt-default-models test case to include panic
coverage, something that until now wasn't possible.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now the fallback behavior is to use MODEL_ISA if we
haven't been able to find a better match, but that's not very
useful as we're still going to hit an error later, when
QEMU_CAPS_DEVICE_PANIC is not found at Validate time.
Instead of doing that, allow MODEL_DEFAULT to get all the
way to Validate and report an error upon encountering it.
The reported error changes slightly, but other than that the
set of configurations that are allowed and blocked remains
the same.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Perform decisions based on the architecture and machine type
in a single place instead of duplicating them.
This technically adds new behavior for MODEL_ISA in
qemuDomainDefAddDefaultDevices(), but it doesn't make any
difference functionally since we don't set addPanicDevice
outside of ppc64(le) and s390(x). If we did, the lack of
handling for that value would be a latent bug.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It merely duplicates the existing aarch64 coverage right now,
but it will become actually useful with the upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The refactor of 'udevListInterfacesByStatus()' which attempted to make
it usable as backend for 'udevNumOfInterfacesByStatus()' neglected to
consider the corner case of 'g_new0(..., 0)' returning NULL if the user
actually requests 0 elements.
As the code was modified to report the full number of interfaces in the
system when the list of names is NULL, the RPC code would be asked to
serialize a NULL-list of interface names with declared lenth of 1+
causing a crash.
To fix this corner case we make callers pass '-1' as @names_len (it's
conveniently an 'int' due to RPC type usage) if they don't wish to fetch
the actual list and convert all decisions to be done on @names_len being
non-negative instead of @names being non-NULL.
CVE-2024-8235
Fixes: bc596f2751
Resolves: https://issues.redhat.com/browse/RHEL-55373
Reported-by: Yanqiu Zhang <yanqzhan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This advertises the feature only for the architectures and
machine types where it can actually be used.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We will soon need to use it in a context where we don't have
a virDomainDef handy.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Originally nicindexes were updated only for VIR_DOMAIN_NET_TYPE_BRIDGE
and VIR_DOMAIN_NET_TYPE_DIRECT. The mentioned commit adds support for
NAT network mode and changes the code to update nicindexes for
VIR_DOMAIN_NET_TYPE_ETHERNET and VIR_DOMAIN_NET_TYPE_NETWORK as well.
It doesn't work as intended and after the change nicindexes are updated
only for VIR_DOMAIN_NET_TYPE_ETHERNET and VIR_DOMAIN_NET_TYPE_NETWORK.
Fixes: aa64209073
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Inside of virschematest.c there's testSchemaDir() which iterates
over dentries in given directory but skips some files: those
without ".xml" suffix, hidden files, symlinks, etc.
Now, symlinks are detected as g_lstat() + S_ISLNK() combo which
works, except it fails to compile on mingw where is no concept of
symlinks. Replace the combo with a call to virFileIsLink() which
at least allows us to compile cleanly on mingw.
Fixes: f997fcca71
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
It's possible to hit the following situation during qemu p2p live
migration:
1. qemu has live migrated and exited (making virDomainObjIsActive()
return false)
2. the live migration job is still in progress, waiting for a
confirmation from the remote libvirt daemon. This may last for
a while with a presence of networking issues (up to keepalive
timeout).
Any attempt to start the domain again would fail with "domain is already
being started" message which is misleading in this situation as it
doesn't reflect what's really happening.
Add a check for the migration job and report a different error message
if the migration job is still running.
Signed-off-by: Sergey Dyasli <sergey.dyasli@nutanix.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Mingw build failed after commit af87ee7927
as 'socketpair()' is not available on that platform.
Stub out the function to return failure.
Fixes: af87ee7927
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
'bhyveConnectGetType' (which is called from 'virConnectGetType') returns
'BHYVE' as the type, but the code in 'remoteDispatchConnectOpen'
responsible for selecting the sub-driver URIs in modular deployment
checks for 'bhyve' and thus would not properly fill the URIs to the
sub-daemons.
Signed-off-by: aokblast <aokblast@FreeBSD.org>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
From: Praveen K Paladugu <prapal@linux.microsoft.com>
enable VIR_DOMAIN_NET_TYPE_NETWORK network support for ch guests.
Tested with following config:
<interface type='network'>
<source network="default" bridge='virbr0'/>
<model type='virtio'/>
<driver queues="1"/>
</interface>
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
From: Praveen K Paladugu <prapal@linux.microsoft.com>
Move methods to connect domain interfaces to host bridges to hypervisor.
This is to allow reuse between qemu and ch drivers.
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu supports this enlightenment since version 7.10.
From the qemu commit:
Hyper-V specification allows to pass parameters for certain hypercalls
using XMM registers ("XMM Fast Hypercall Input"). When the feature is
in use, it allows for faster hypercalls processing as KVM can avoid
reading guest's memory.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
qemu supports this enlightenment since version 7.10.
From the qemu commit:
The newly introduced enlightenment allow L0 (KVM) and L1 (Hyper-V)
hypervisors to collaborate to avoid unnecessary updates to L2
MSR-Bitmap upon vmexits.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, qemuProcessStop() unlocks given domain object right in
the middle of cleanup process. This is dangerous because there
might be another thread which is executing virDomainObjListAdd().
And since the domain object is on the list of domain objects AND
by the time qemuProcessStop() unlocks it the object is also
marked as inactive, the other thread acquires the lock and
switches vm->def pointer.
The unlocking of domain object is needed though, to allow even
processing thread finish its queue. Well, the processing can be
done before any cleanup is attempted.
Therefore, use freshly introduced virEventThreadStop() to join
the event thread and drop lock/unlock from the middle of
qemuProcessStop().
Now, there's a comment being removed that mentions
qemuDomainObjStopWorker() and why it has to be called only after
the domain is marked as dead. This comment is no longed
applicable because call to qemuDomainObjStopWorker() is removed
also. Moreover, priv->beingDestroyed is set to true before
unlocking the domain object, thus any event processing callback
is going to see the domain being destroyed and can chose to
either exit early or finish processing event.
Fixes: 3865410e7f
Resolves: https://issues.redhat.com/browse/RHEL-49607
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The aim is to move parts of vir_event_thread_finalize() that MAY
block into a separate function, so that unrefing the a
virEventThread no longer blocks (or require releasing and
subsequent re-acquiring of a mutex).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce tests to verify that the 'ps2' feature is correctly parsed
when given either 'dirty' XML from a user or 'clean' canonical XML,
as produced by libvirt. This also tests the transformation from libvirt's
internal state to the aforementioned canonical form and to a QEMU
command line.
As a bonus, we also test some known bad configurations:
- When user explicitly adds ps2 bus inputs, but also explicitly disables
the 'ps2' feature.
- When user explicitly enables the 'vmport' feature, but also explicitly
disables the 'ps2' feature. This is not supported by QEMU and will
result in vmport device not being created without emitting any warning
or error.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This introduces a new 'ps2' feature which, when disabled, results in
no implicit PS/2 bus input devices being automatically added to the
domain and addition of the 'i8042=off' machine option to the QEMU
command-line.
A notable side effect of disabling the i8042 controller in QEMU is that
the vmport device won't be created. For this reason we will not allow
setting the vmport feature if the ps2 feature is explicitly disabled.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability tells us whether given QEMU binary supports the
'-machine xxx,i8042=on/off' toggle used to enable/disable PS/2
controller emulation.
A few facts:
- This option was introduced in QEMU 7.0 and defaults to 'on'
- QEMU versions before 7.0 enabled i8042 controller emulation implicitly
- This option (and i8042 controller emulation itself) is only supported
by descendants of the generic PC machine type (e.g. i440fx, q35, etc.)
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Up until now, we've assumed that all x86 machines have a PS/2
controller built-in. This assumption was correct until QEMU v4.2
introduced a new x86-based machine type - microvm.
Due to this assumption, a pair of unnecessary PS/2 inputs are implicitly
added to all microvm domains. This patch fixes that by whitelisting
machine types which are known to include the i8042 PS/2 controller.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
