For reasons unknown, when rewriting this code and dropping
libdevmapper I've mistakenly used incorrect length of dm.name. In
linux/dm-ioctl.h the dm_ioctl struct is defined as follows:
#define DM_NAME_LEN 128
struct dm_ioctl {
...
char name[DM_NAME_LEN]; /* device name */
...
};
However, when copying string into this member, DM_TABLE_DEPS was
used, which is defined as follows:
#define DM_TABLE_DEPS _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
After decryption, this results in the following size: 3241737483.
Fixes: 2249455654
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tools depend on keycode generated sources, so declare that as an
explicit dependency, otherwise it might fail with:
../tools/virsh-completer-domain.c:35:10: fatal error: 'virkeynametable_linux.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: b0f4cf25a6
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit bbc25f0d03 juggled around some
error reporting. Unfortunately virFirewallApply tries to report the
errno stored in the firewall object and we'd try to do that when the
firewall object is NULL too. Report EINVAL if 'firewall' is NULL.
Found by Coverity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There's an optimization in virBufferAdd which returns early when the
length of the added string is 0 (given that auto-indent is disabled).
The optimization causes inconsistent behaviour between these two cases:
virBufferAdd(buf, "", 0); // this doesn't initialize the buffer
and
virBufferAdd(buf, "", -1); //this initializes the buffer
Since using an empty string is used to prime the buffer to an empty
string it can be confusing. Remove the optimization.
This fixes such a wrong initialization done in x86FeatureNames.
Note that our code in many places expects that if no virBuffer APIs are
used on a buffer object, then NULL should be retured, so we can't always
prime the buffer to an empty string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use an allocated buffer for 'cpu_header' so that g_strdup(_printf) can
be used to fill it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use a dynamic string helper so that we don't have to calculate the
string lengths and then iterate from the rear.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can remove the check that 'idx' is negative by forcing callers to
pass unsigned numbers, which they do already or have a check that 'idx'
is positive.
This in turn allows us to remove most return value NULL checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function is used to automatically feed a buffer into a pipe which
can be used by the command to read contents of the buffer.
Rather than passing in a pipe, let's create the pipe inside
virCommandSetSendBuffer and directly associate the reader end with the
command. This way the ownership of both ends of the pipe will end up
with the virCommand right away reducing the need of cleanup in callers.
The returned value then can be used just to format the appropriate
arguments without worrying about cleanup or failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail nowadays. Remove the return value and adjust the
only caller which ensures that @cmd is non-NULL and @fd is positive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the check and reporting of error from the individual virCommand
APIs into a separate helper. This will aid future refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If WITH_PIPE2 is not defined we attempt to set the pipe to nonblocking
operation after they are created. We errorneously rewrote the existing
error message on failure to do so or even reported an error if quiet
mode was requested.
Fixes: ab36f72947
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use of VIR_ERROR_MAX_LENGTH is actually misleading to the readers
because it implies that the strings in virError are 1024 bytes at most.
That isn't true at least for the 'message' field as it's constructed
from concatenating the detail string which (was) max 1024 bytes with
the string variant of the error code without limiting to 1024.
Use a local copy for declaring the struct for error transport with a
comment so that's obvious that it's a local decision to use 1k buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some error message reporting functions already have allocated buffers
which were used to format the error message, so copying the strings is
redundant.
Extract the internals from 'virRaiseErrorFull' to
'virRaiseErrorInternal' which takes allocated strings as arguments and
steals them, so that callers can reuse the buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was (probably) a relict from times when we cared about OOM
conditions and the possibility to report the error. Nowadays it doesn't
make sense as virRaiseErrorFull will do an allocated copy of the strings
and also concatenate the error message prefix with the detail which
doesn't guarantee that the result will be less than 1024 chars.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Passing 'strlen(src)' for length makes it equivalent to virStrcpy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virStrncpy was called with -1 for length of the copied source which is
equivalent to virStrcpy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
15 out of 72 invocations of virStrcpy(Static) ignore the return value as
it's either impossible to fail or in certain cases a truncated copy is
still good enough. Unfortunately virStrcpy doesn't copy anything in
such case as the checks are done first.
Fix this by using g_strlcpy for the implementation and removing
G_GNUC_WARN_UNUSED_RESULT from the function so that callers can decide
when it's okay.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This way it can be used from other places as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Generated using the following spatch:
@@
expression path;
@@
- virFileMakePath(path)
+ g_mkdir_with_parents(path, 0777)
However, 14 occurrences were not replaced, e.g. in
virHostdevManagerNew(). I don't really understand why.
Fixed by hand afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These functions are identical. Made using this spatch:
@@
expression path, mode;
@@
- virFileMakePathWithMode(path, mode)
+ g_mkdir_with_parents(path, mode)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refractoring includes:
* removal of VIR_FREE
* inversion of the condition
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Previous commit removed all usage of this function so we can remove it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Before the conversion to using systemd DBus API to set the cpu.shares
there was some magic conversion done by kernel which was documented in
virsh manpage as well. Now systemd errors out if the value is out of
range.
Since we enforce the range for other cpu cgroup attributes 'quota' and
'period' it makes sense to do the same for 'shares' as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Trying to report an OOM error is pointless since our infrastructure to
report error needs to allocate memory to report the error.
In addition our code mistakenly reported OOM errors even in cases where
a function could fail for another reason, which would make issues harder
to debug.
Remove the virReportOOMError and backend so that programmers are forced
to think about what can happen. In case when there's another failure
possible a specific error should be reported and otherwise a direct
abort() is better since the logger would abort on g_new anyways.
This patch also removes the syntas-check which forces use of
virReportOOMError instead of using VIR_ERR_NO_MEMORY with other
functions. This allows possible future use when we'd end up in a
situation where trying to recover from an OOM would make sense, such as
when attempting to allocate a massive buffer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The yajl library returns a wide range of error codes so reporting OOM on
any failure is wrong. In case the error was really based by memory issue
the error reporting will probably cause an abort anyways. Change the
error message so that we know that it happened in JSON at least.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
If the argument of 'xmlSaveUri' is non-NULL the function returns NULL on
OOM failure only. Thus we can directly abort rather than try to do the
impossible recovery.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Add a wrapper that will handle the out of memory condition by abort()
and also prevents callers from having to typecast the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
'xmlBufferCreate' returns NULL only on allocation failure. Add a wrapper
which will call 'abort()' in such case in a centralised spot. It doesn't
make much sense to continue execution from here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function is used in many places and fails only on allocation
failures. Since trying to recover from allocation failure of a small
buffer by reporting error doesn't make sense add a wrapper for
'nlmsg_alloc_simple' which will 'abort()' on failure and replace all
allocations of netlink message with the new helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
There's nothing that would set the 'err' field of virFirewallPtr to
ENOMEM so we can remove the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
VIR_APPEND_ELEMENT_COPY will abort the program on OOM so there's no need
to check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function can't fail nowadays, remove the return value and adjust
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Get the buffer contents into a temporary variable with automatic
clearing so that the error branches don't have to reset the buffer.
Additionally handle the NULL string case before assignment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function is supposed to always consume the passed environment
variable string. Use a temp variable with autofree and g_steal_pointer
to prevent having to free it manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This function finds "swtmp", "swtpm_setup" and "swtpm_ioctl"
binaries in $PATH and stores resolved paths in global variables
so that they can be obtainer later. Anyway, the resolved path is
marked as g_autofree and to avoid its freeing later on in the
function the variable is set to NULL manually. Well, we have
g_steal_pointer() for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This change will allow us to remove PCI devices from a list
without the need of a PCI Device object, which will be need
in the next patch.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We're going to need a way to remove a PCI Device from a list without having
a valid virPCIDevicePtr, because the device is missing from the host. This
means that virPCIDevicesListDel() must operate with a PCI Device address
instead.
Turns out that virPCIDevicesListDel() and its related functions only use
the virPCIDeviceAddressPtr of the virPCIDevicePtr, so this change is
simple to do and will not cause hassle in all other callers. Let's
start adapting virPCIDeviceListFindIndex() and crawl our way up to
virPCIDevicesListDel().
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We're going to add logic to handle the case where a previously
existing PCI device does not longer exist in the host.
The logic was copied from virPCIDeviceNew(), which verifies if a
PCI device exists in the host, returning NULL and throwing an
error if it doesn't. The NULL is used for other errors as well
(product/vendor id read errors, dev id overflow), meaning that we
can't re-use virPCIDeviceNew() for the purpose of detecting
if the device exists.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Via coccinelle (not the handbag!)
spatches used:
@ rule1 @
identifier a, b;
symbol NULL;
@@
- b = a;
... when != a
- a = NULL;
+ b = g_steal_pointer(&a);
@@
- *b = a;
... when != a
- a = NULL;
+ *b = g_steal_pointer(&a);
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The function calls virJSONValueObjectAppend/virJSONValueArrayAppend, so
by taking a double pointer we can drop the pointer clearing from
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Avoid pointless copies of temporary strings when constructing number
JSON objects.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virJSONValueNew* won't return error nowadays so NULL checks are not
necessary. The memory can be cleared via g_autoptr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parent array takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing and don't check return value of
virJSONValueNewString as it can't fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parent object takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr for the JSON value objects and remove the cleanup label
and inline freeing of objects.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree for the pointer of the added object and remove the NULL
checks for values returned by virJSONValueNew* (except
virJSONValueNewNumberDouble) since they can't fail nowadays.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We know the exact number of keys or array members for the copied objects
so we can pre-allocate the arrays rather than inserting into them in a
loop incurring realloc copy penalty.
Also virJSONValueCopy now can't fail since all of the functions
allocating the different cases use just g_new/g_strdup internally so we
can remove the NULL checks from the recursive calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function takes ownership of @value on success so the proper
semantics will be to clear out the @value pointer. Convert @value to a
double pointer to do this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
* src/util/virsocket.c (virSocketRecvFD): Set msg.msg_controllen as documented
in the man pages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All callers are now using the on|off syntax, so yes|no is a unreachable
code path.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has long accepted many different values for boolean properties, but
set accepted has been different depending on which QEMU parser you hit.
The on|off values were supported by all QEMU parsers. The yes|no, y|n,
true|false values were only partially supported:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg01012.html
Thus we should standardize on on|off everywhere since that is most
widely supported in QEMU.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has long accepted many different values for boolean properties, but
set accepted has been different depending on which QEMU parser you hit.
The on|off values were supported by all QEMU parsers. The yes|no, y|n,
true|false values were only partially supported:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg01012.html
Thus we should standardize on on|off everywhere since that is most
widely supported in QEMU.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our implementation was inspired by glib anyways. The difference is only
the order of arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our implementation was heavily inspired by the glib version so it's a
drop-in replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The glib implementation doesn't tolerate NULL but in most cases we check
before anyways. The rest of the callers adds a NULL check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't re-calculate the string list length on every iteration. Convert
the loop to NULL-terminated iteration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All callers were converted to the glib alternative. Providing our own
just to have NULL tolerance doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is a uncommon and trivial operation, so having an utility function
for it is pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Lookup the string with prefix locally so that we can remove the helper
which isn't universal at all.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virStringListAdd hides the fact that a O(n) count of elements is
performed every time it's called which makes it inefficient.
Stop supporting such semantics and remove the helpers. Users have a
choice of using GSList or an array with a counter variable rather than
repeated lookups.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since adding and removing is the main use case for the macmap module,
convert the code to a more efficient data structure.
The refactor also optimizes the loading from file where previously we'd
do a hash lookup + list lenght calculation for every entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The iner loop copies the 'resources' array multiple times using
'virStringListAdd' which has O(n^2) complexity.
Pre-calculate the length so we can allocate the array upfront and just
copy the strings in the loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pre-allocate a buffer for the upper limit and shrink it afterwards to
avoid use of 'virStringListAdd' in a loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virStringListAdd' calculates the string list length on every invocation
so constructing a string list using it results in O(n^2) complexity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
glib's 'g_autoslist()' doesn't support lists of 'char *' strings. Add a
type alias 'virGSListString' so that we can register an 'autoptr'
function for it for simple usage of GSList with strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When running on host with systemd we register VMs with machined.
In this case systemd creates the root VM cgroup for us. This has some
implications where one of them is that systemd owns all files inside
the root VM cgroup and we should not touch them.
We already use DBus calls for some of the APIs but for the remaining
ones we will continue accessing the files directly. Systemd doesn't
support threaded cgroups so we need to do this.
The reason why we don't use DBus for most of the APIs is that we already
have a code that works with files and we would have to check if systemd
supports each API.
This change introduces new topology on systemd hosts:
$ROOT
|
+- machine.slice
|
+- machine-qemu\x2d1\x2dvm1.scope
|
+- libvirt
|
+- emulator
+- vcpu0
+- vcpu0
compared to the previous topology:
$ROOT
|
+- machine.slice
|
+- machine-qemu\x2d1\x2dvm1.scope
|
+- emulator
+- vcpu0
+- vcpu0
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This will check if the cgroup actually exists on the system.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we create a new child cgroup and the parent cgroup has any process
attached to it enabling controllers for the child cgroup fails with
error. We need to move the process into the child cgroup first before
enabling any controllers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove one level of indentation by splitting the condition.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When running on host with systemd we register VMs with machined.
In this case systemd creates the root VM cgroup for us. This has some
implications where one of them is that systemd owns all files inside
the root VM cgroup and we should not touch them.
If we change any value in file that systemd knows about it will be
changed to what systemd thinks it should be when executing
`systemctl daemon-reload`.
These are the APIs that we need to call using systemd because they set
limits that are proportional to sibling cgroups.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are few cases where STREQLEN() is called like this:
STREQLEN(var, string, strlen(string))
which is the same as STRPREFIX(var, string). Use STRPREFIX()
because it is more obvious what the check is doing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
When deleting the vhostuserclient interface, OVS prompts that the interface does not exist,
Through the XML file, I found that the "target dev" has a '\n', results in an XML parsing error.
XML file:
<target dev='vm-20ac9c030a47
'/>
That is because 'ovs-vsctl' returns a newline result, always come with a '\n',
and the vircommandrun function puts it in ifname.
So virNetDevOpenvswitchGetVhostuserIfname should remove '\n' from ifname.
Signed-off-by: Yalei Li <liyl43@chinatelecom.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
dhcpHostFree() and addnHostFree() don't follow the normal pattern of
*Free functions in the rest of libvirt code - they are actually more
similar to the *Dispose() functions, in that they free all subordinate
objects, but not the object pointed to by the argument
itself. However, the arguments aren't virObjects, so it wouldn't be
proper to name them *Dispose() either.
They *currently* behave similar to a *Clear() function, in that they
free all the subordinate objects and nullify the pointers of those
objects. HOWEVER, we don't actually need or want that behavior - the
two functions in question are only called as part of a higher level
*Free() function, and the pointers are not referenced in any way
between the time they are freed and when the parent object is freed.
So, since the current name isn't correct, nor is *Dispose(), and we
want to change the behavior in such a way that *Clear() also wouldn't
be correct, lets name the functions *FreeContent(), which is an
accurate description of what the functions do, and what we *want* them
to do.
And since it's such a small patch, we can go ahead and change that
behavior - replacing the VIR_FREEs with g_free.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A memory leak was identified in
virCgroupEnableMissingControllers():
==11680== at 0x483EAE5: calloc (vg_replace_malloc.c:760)
==11680== by 0x4E51780: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6701.0)
==11680== by 0x4908618: virCgroupNew (vircgroup.c:701)
==11680== by 0x49096F4: virCgroupEnableMissingControllers (vircgroup.c:1146)
==11680== by 0x4909B17: virCgroupNewMachineSystemd (vircgroup.c:1228)
==11680== by 0x4909E94: virCgroupNewMachine (vircgroup.c:1313)
==11680== by 0x1694FDBC: qemuInitCgroup (qemu_cgroup.c:946)
==11680== by 0x1695046B: qemuSetupCgroup (qemu_cgroup.c:1083)
==11680== by 0x16A60126: qemuProcessLaunch (qemu_process.c:7077)
==11680== by 0x16A61504: qemuProcessStart (qemu_process.c:7384)
==11680== by 0x169B84C2: qemuDomainObjStart (qemu_driver.c:6590)
==11680== by 0x169B8776: qemuDomainCreateWithFlags (qemu_driver.c:6641)
What happens is that new virCgroup is created and stored into
@parent. Then, if @tokens is not empty the for() loop is entered
into where another virCgroup is created and @parent is replaced
with this new virCgroup. But nothing freed the old @parent.
Fixes: 77291414c7
Reported-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The use case VIR_ALLOC_VAR deals with is very unlikely. We had just 2
legitimate uses, which were reimplemented locally using g_malloc0 and
sizeof instead as they used a static number of members of the trailing
array.
Remove VIR_ALLOC_VAR since in most cases the direct implementation is
shorter and clearer and there are no users of it currently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In this case we need a 'struct ethtool_gfeatures' followed by two
'struct ethtool_get_features_block' so there's no risk of overflow.
Use g_malloc0 and sizeof() to allocate the memory instead of
VIR_ALLOC_VAR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Users were replaced with virSecureEraseString with explicit freeing of
the memory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are no users any more. The replacement is to use g_auto and
virSecureEraseString explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The macros are unused now and callers who care about clearing the memory
they use should use memset() appropriately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Clear the key and IV structs using virSecureErase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Clear out the value using virSecureErase and free it with g_free so
that VIR_DISPOSE_N can be phased out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The module will provide functions for disposing secrets stored in
memory.
Note that for now it's implemented using memset, which is not really
secure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The headers weren't removed after use of VIR_STRDUP was removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
"f + 0.5" does not round correctly for values very close to
".5" for every integer multiple, e.g. "0.499999975".
Found by clang-tidy's "bugprone-incorrect-roundings" check.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This was found by clang-tidy's
"clang-analyzer-security.insecureAPI.bzero" check.
bzero is marked as deprecated ("LEGACY") in POSIX.1-2001 and
removed in POSIX.1-2008.
Besides its deprecation, bzero can be unsafe to use under certain
circumstances, e.g. when used to zero-out memory containing secrects.
These calls can be optimized away by the compiler, if it concludes no
further access happens to the memory, thus leaving the secrets still
in memory. Hence its classification as "insecureAPI".
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This section is guarded by "#ifndef WIN32" in line 2109--2808.
Found by clang-tidy's "readability-redundant-preprocessor" check.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
posix_fallocate() might be not supported by a filesystem, for example,
it's not supported by ZFS. In that case it fails with
return code 22 (EINVAL), and thus safezero_posix_fallocate() returns -1.
As safezero_posix_fallocate() is the first function tried by safezero()
and it tries other functions only when it returns -2, it fails
immediately without falling back to other methods, such as
safezero_slow().
Fix that by returning -2 if posix_fallocate() returns EINVAL, to give
safezero() a chance to try other functions.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current virPCIDeviceNew() signature, receiving 4 uints in sequence
(domain, bus, slot, function), is not neat.
We already have a way to represent a PCI address in virPCIDeviceAddress
that is used in the code. Aside from the test files, most of
virPCIDeviceNew() callers have access to a virPCIDeviceAddress reference,
but then we need to retrieve the 4 required uints (addr.domain, addr.bus,
addr.slot, addr.function) to satisfy virPCIDeviceNew(). The result is
that we have extra verbosity/boilerplate to retrieve an information that
is already available in virPCIDeviceAddress.
A better way is presented by virNVMEDeviceNew(), where the caller just
supplies a virPCIDeviceAddress pointer and the function handles the
details internally.
This patch changes virPCIDeviceNew() to receive a virPCIDeviceAddress
pointer instead of 4 uints.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is no need to open code the PCI address string format
when we have a function that does exactly that.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are no other files using it. Move it and make the functions
static.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virPCIGetNetName is used to get the name of the netdev associated with
a particular PCI device. This is used when we have a VF name, but need
the PF name in order to send a netlink command (e.g. in order to
get/set the MAC address of the VF).
In simple cases there is a single netdev associated with any PCI
device, so it is easy to figure out the PF netdev for a VF - just look
for the PCI device that has the VF listed in its "virtfns" directory;
the only name in the "net" subdirectory of that PCI device's sysfs
directory is the PF netdev that is upstream of the VF in question.
In some cases there can be more than one netdev in a PCI device's net
directory though. In the past, the only case of this was for SR-IOV
NICs that could have multiple PF's per PCI device. In this case, all
PF netdevs associated with a PCI address would be listed in the "net"
subdirectory of the PCI device's directory in sysfs. At the same time,
all VF netdevs and all PF netdevs have a phys_port_id in their sysfs,
so the way to learn the correct PF netdev for a particular VF netdev
is to search through the list of devices in the net subdirectory of
the PF's PCI device, looking for the one netdev with a "phys_port_id"
matching that of the VF netdev.
But starting in kernel 5.8, the NVIDIA Mellanox driver began linking
the VFs' representor netdevs to the PF PCI address [1], and so the VF
representor netdevs would also show up in the net
subdirectory. However, all of the devices that do so also only have a
single PF netdev for any given PCI address.
This means that the net directory of the PCI device can still hold
multiple net devices, but only one of them will be the PF netdev (the
others are VF representors):
$ ls '/sys/bus/pci/devices/0000:82:00.0/net'
ens1f0 eth0 eth1
In this case the way to find the PF device is to look at the
"phys_port_name" attribute of each netdev in sysfs. All PF devices
have a phys_port_name matching a particular regex
(p[0-9]+$)|(p[0-9]+s[0-9]+$)
Since there can only be one PF in the entire list of devices, once we
match that regex, we've found the PF netdev.
[1] - https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/
commit/?id=123f0f53dd64b67e34142485fe866a8a581f12f1
Co-Authored-by: Moshe Levi <moshele@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Adrian Chiris <adrianc@nvidia.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This commit add virNetDevGetPhysPortName to read netdevice
phys_port_name from sysfs. It also refactor the code so
virNetDevGetPhysPortName and virNetDevGetPhysPortID will use
same method to read the netdevice sysfs.
Signed-off-by: Moshe Levi <moshele@nvidia.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The code handles XML bits and internal definition and should be
in conf directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code handles XML bits and internal definition and should be
in conf directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Same as virStorageFileBackend, it doesn't belong into util directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It's used only by storage file code so it doesn't make sense to have
it in util directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Up until now we had a runtime code and XML related code in the same
source file inside util directory.
This patch takes the runtime part and extracts it into the new
storage_file directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This code is not directly relevant to virStorageSource so move it to
separate file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow following patches to move virStorageSource into conf
directory and virStorageDriverData into a new storage_file directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since Hyper-V allows multiple VMs to be created with the same name,
some commands produce unpredictable results due to
hypervDomainLookupByName's WMI query selecting the wrong domain.
For example, this prevents `virsh dumpxml` from outputting XML for the
wrong domain.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extract common code as helper function virNetlinkTalk, then simplify
the functions virNetlink[DumpLink|NewLink|DelLink|GetNeighbor].
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a macro NETLINK_MSG_APPEND to wrap nlmsg_append and
simplify code. Remove those labels 'buffer_too_small', since they
are now useless.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move macros NETLINK_MSG_[NEST_START|NEST_END|PUT] from .h into .c;
within these macros, replace 'goto' with reporting error and returning;
simplify virNetlinkDumpLink and virNetlinkDelLink by using NETLINK_MSG_PUT.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
NLM_F_CREATE and NLM_F_EXCL are invalid for RTM_DELLINK,
so remove them.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far we assumed that any vhostuser interface is plugged into an
OVS bridge and thus 'ovs-vsctl' exists. But this is not always
true. In testing scenarios it is possible to create a vhostuser
interface with this tool dpdk-testpmd (part of dpdk RPM) which
creates/connects to UNIX socket needed for vhostuser. Of course,
since there is no OVS then there is no interface name in which
case virNetDevOpenvswitchGetVhostuserIfname() should return 0.
The rest of APIs that assume OVS are not 'fixed' because we still
want them to fail (e.g. getting statistics, plugging interface
into an OVS bridge, unplugging it from an OVS bridge, ...).
The only API that is fixed is
virNetDevOpenvswitchGetVhostuserIfname() because it is called
explicitly when starting a guest (and callers are okay if no name
was found).
The other way to fix this bug seems to be to simply require
'ovs-vsctl' on spec file level, but that is too heavy gun given
that vhostuser is used by a small set of our users (assumption
made on requirements for vhostuser). Also, this way would drag in
yet another dependency for all users (even those who want minimal
libvirt).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1913156
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
dnsmasq usually prints out a version string like this:
Dnsmasq version 2.82 [...]
but a user reported that the build of dnsmasq included with pihole has
a version string like this:
Dnsmasq version pi-hole-2.81 [...]
We parse the dnsmasq version number to figure out if the dnsmasq
binary supports certain features. Since we expect the version number
(and it must be only numbers!) to start on the first non-space after
the string "Dnsmasq version", we fail to parse this format of the
version string.
Rather than spending a bunch of time trying to get pihole to change
that, we can just make our parsing more permissive - after searching
for "Dnsmasq version", we'll skip ahead to the first decimal digit,
rather than just the first non-space.
(NB: The features we're checking for purely by looking at version
number have been in all releases of dnsmasq since at least 2012, so we
could actually just remove the reading of the version number
completely. However it's possible (although *highly* unlikely)
that some new feature would be added to dnsmasq in the future and we
would need to add that code back.)
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/29
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function skips over the beginning of a string until it reaches a
decimal digit (0-9) or the NULL at the end of the string. The original
pointer is modified in place (similar to virSkipSpaces()).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain specific cases it might be beneficial to be able to control
the metadata caching of storage image format drivers of a hypervisor.
Introduce XML machinery to set the maximum size of the metadata cache
which will be used by qemu's qcow2 driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable parsing of backing store strings containing the native 'nfs'
protocol specification.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'nfs_user'/'nfs_group' represents the XML configuration.
'nfs_uid'/'nfs_gid' is internal store when libvirt looks up the user's
uid/gid in the system.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virJSONValueObjectRemoveKey can be used as direct replacement. Fix the
one caller and remove the duplicate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The lookup didn't do anything apart from comparing the sysfs paths
anyway since that's what makes each mdev unique.
The most ridiculous usage of the old logic was in
virHostdevReAttachMediatedDevices where in order to drop an mdev
hostdev from the list of active devices we first had to create a new
mdev and use it in the lookup call. Why couldn't we have used the
hostdev directly? Because the hostdev and mdev structures are
incompatible.
The way mdevs are currently removed is via a write to a specific sysfs
attribute. If you do it while the machine which has the mdev assigned
is running, the write call may block (with a new enough kernel, with
older kernels it would return a write error!) until the device
is no longer in use which is when the QEMU process exits.
The interesting part here comes afterwards when we're cleaning up and
call virHostdevReAttachMediatedDevices. The domain doesn't exist
anymore, so the list of active hostdevs needs to be updated and the
respective hostdevs removed from the list, but remember we had to
create an mdev object in the memory in order to find it in the list
first which will fail because the write to sysfs had already removed
the mdev instance from the host system.
And so the next time you try to start the same domain you'll get:
"Requested operation is not valid: mediated device <path> is in use by
driver QEMU, domain <name>"
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/119
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDeviceHasPCIExpressLink() wasn't checking that pcie_cap_pos was
valid before attempting to use it, which could lead to reading the
byte at offset 0 + PCI_CAP_ID_EXP instead of [valid offset] +
PCI_CAP_ID_EXP. In particular, this could happen for "integrated" PCI
devices (those that are on the PCIe root complex). If it happened that
the byte from the wrong address had the "right" bit set, then it would
lead to us innappropriately believing that Express Link info was
available when it wasn't, and the node device driver would then log an
error like this:
virPCIDeviceGetLinkCapSta:2754 :
internal error: pci device 0000:00:18.0 is not a PCI-Express device
during a libvirtd restart. (this didn't ever occur until after
virPCIDeviceIsPCIExpress() was made more intelligent in commit
c00b6b1ae, which hasn't yet been in any official release)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The only reason why virstoragefile.h needs to be included in virfile.h
is that virFileNBDDeviceAssociate() takes virStorageFileFormat argument.
The function doesn't need the enum value as it converts the value to
string and uses only that.
Change the argument to string which will allow us to remove that
include.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All these headers are indirectly included provided by virfile.h having
virstoragefile.h which will be removed in the following patch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function doesn't take virStorageSource as argument and has nothing
in common with virStorageSource or storage file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Function virQEMUBuildQemuImgKeySecretOpts is not used anywhere else
so there is no need to have it in util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The last usage outside of tests was removed by commit
<780f8c94ca8b3dee7eb59c1bfbc32f672f965df8>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The last user was removed by commit
<40f0e0348dfc84f28a500e262c4953b0d3b44fa0>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When adding a new lease by our leaseshelper then virLeaseNew() is
called. Here, we check for DNSMASQ_LEASE_EXPIRES environment
variable which is the expiration time for the lease. For infinite
lease time the value is zero. However, our code is not prepared
for that and adds "expiry-time" into the JSON file only if lease
expiry time is non-zero. This breaks the assumption that the
"expiry-time" attribute is always present (as can be seen in
virLeaseReadCustomLeaseFile() and virLeasePrintLeases()).
Store "expiry-time" always.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In virLeaseNew() we are trying to remove trailing space (per
comment it may happen that older versions of dnsmasq put it into
an env variable). Well, instead of open coding it, we can use
virTrimSpaces().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are some variables which are used only inside the single
loop the function has. Let's declare them inside the loop body to
make that obvious. Also, fix indendation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
During testing of my patch v6.10.0-rc1~221 it was found that
'ovs-vsctl get Interface $name name' or
'ovs-vsctl find Interface options:vhost-server-path=$path'
may return a string in double quotes, e.g. "vhost-user1". Later
investigation of openvswitch code showed, that early versions
(like 1.3.0) have somewhat restrictive set of safe characters
(isalpha() || '_' || '-' || '.'), which is then refined with
increasing version. For instance, version 2.11.4 has: isalnum()
|| '_' || '-' || '.'. If the string that ovs-vsctl wants to
output contains any other character it is escaped. You want to be
looking at ovsdb_atom_to_string() which handles outputting of a
single string and calls string_needs_quotes() and possibly
json_serialize_string() in openvswitch code base.
Since the interfaces are usually named "vhost-userN" we are
facing a problem where with one version we get the name in double
quotes and with another we get plain name without funny business.
Because of json involved I thought, let's make ovs-vsctl output
into JSON format and then use our JSON parser, but guess what -
ovs-vsctl ignores --format=json. But with a little help of
g_strdup_printf() it can be turned into JSON.
Fixes: e4c29e2904
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In v6.10.0-rc1~221 I wanted to make virNetDevOpenvswitchGetVhostuserIfname()
lookup interface name even for vhostuser interfaces with mode='server'. For
these, we are given a socket path which is then created by QEMU and to which
OpenVSwitch connects to and creates an interface. Because of this, we don't
know the name of the interface upfront (when starting QEMU) and have to use
the path to query OpenVSwitch later (using ovs-vsctl). What I intended to use
was:
ovs-vsctl --no-headings --columns=name find Interface options:vhost-server-path=$path
But what my code does is:
ovs-vsctl --no-headings --columns=name find Interface options:vhost-server-path=path
and it's all because the argument to the function is named "path"
which I then enclosed in double quotes while it should have been
used as a variable.
Fixes: e4c29e2904
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The comment about auto-generating names was obsoleted by recent
changes, and there was an unnecessary set of braces around a single
line conditional body.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 282d135ddb the parser for <interface> has cleared out
any interface name from the input XML that used the macvtap/macvlan
name as a prefix. Along with that, the switch to use the new
virNetDevGenerateName() function for auto-generating macvtap/macvlan
device names (commit 9b5d741a9), has realized two facts:
1) virNetDevGenerateName() can be called with a name already filled
in, and in that case it is an effective NOP.
2) because virNetDevGenerate() will always find an unused name, there
is no need to retry device creation in a loop - if it fails the
first time, it would fail any subsequent time as well.
that, combined with the aforementioned parser change allow us to
simplify virNetDevMacVLanCreateWithVPortProfile() - we no longer need
any extra code to determine if a template "AutoName" was requested,
and don't need a separate code path for creating the device in the
case that a specific name was given in the XML - all we need to do is
log any requested name, and then call exactly the same code as we
would if no name was given.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The Linux implementation of virNetDevCreate() doesn't require a
template ifname (e.g. "vnet%d") when it is called, but just generates
a new name if ifname is empty. The FreeBSD implementation requires
that the caller actually fill in a template ifname, and will fail if
ifname is empty. Since we want to eliminate all the special code in
callers that is setting the template name, we need to make the
behavior of the FreeBSD virNetDevCreate() match the behavior of the
Linux virNetDevCreate().
The simplest way to do this is to use the new virNetDevGenerateName()
function - if ifname is empty it generates a new name with the proper
prefix, and if it's not empty, it leaves it alone.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When netlink is supported, use netlink to create veth device pair
rather than 'ip link' command.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Simplify virNetDevVethCreate by using common GenerateName/ReserveName
functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Simplify ReserveName/GenerateName for macvlan and macvtap by using
common functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Simplify GenerateName/ReserveName for netdevtap by using common
functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Extract ReserveName/GenerateName from netdevtap and netdevmacvlan as
common helper functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Until now there has been an extra bit of code in
qemuDomainDeviceCalculatePCIConnectFlag() (one of the two callers of
virPCIDeviceIsPCIExpress()) that tries to determine if a device is
PCIe by looking at the *length* of its sysfs config file; it only does
this when libvirt is running as a non-root process.
This patch takes advantage of our newfound ability to tell the
difference between "I read a 0 from the device PCI config file" and "I
couldn't read the PCI Express Capabilities because I don't have
sufficient permission" to put the file length check down in
virPCIDeviceIsPCIExpress(), and do that check any time we fail while
reading the config file (not only when the process is non-root).
Fixes: https://bugzilla.redhat.com/1901685
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously there was no way to differentiate between this function 1)
encountering an error while reading the pci config, and 2) determining
that the device in question is a conventional PCI device, and so has
no Express Capabilities.
The difference between these two conditions is important, because an
unprivileged libvirtd will be unable to read all of the pci config (it
can only read the first 64 bytes, and will get ENOENT when it tries to
seek past that limit) even though the device is in fact a PCIe device.
This patch changes virPCIDeviceFindCapabilityOffset() to put the
determined offset into an argument of the function (rather than
sending it back as the return value), and to return the standard "0 on
success, -1 on failure". Failure is determined by checking the value
of errno after each attemptd read of the config file (which can only
work reliably if errno is reset to 0 before each read, and after
virPCIDeviceFindCapabilityOffset() has finished examining it).
(NB: if the config file is read successfully, but no Express
Capabilities are found, then the function returns success, but the
returned offset will be 0 (which is an impossible offset for Express
Capabilities, and so easily recognizeable).
An upcoming patch will take advantage of the change made here.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new message is more verbose/useful, but only logged at debug level
instead of as a warning (since it could easily happen in a non-error
situation).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function returned an int, but would only return 0 or 1, and the
one place it was called would just use !! to convert that value to a
bool. Change the function to directly return bool instead.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function returned an int, and that int was being checked for < 0
in its solitary caller, but within the function it would only ever
return 0 or 1. Change the function itself to return a bool, and the
caller to just directly set the flag in the virPCIDevice.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We previous added code for passing FDs which was explicitly derived from
gnulib's passfd code:
commit 17460825f3
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Fri Jan 17 11:57:17 2020 +0000
src: implement APIs for passing FDs over UNIX sockets
This is a simplified variant of gnulib's passfd module
without the portability code that we do not require.
while the license was unchanged, we mistakenly failed to copy the FSF
copyright header which is required by the license terms.
Reported-by: Bruno Haible <bruno@clisp.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This macro checks whether given number is an integer power of
two. At the same time, I've identified two places where we check
for pow2 and I'm replacing them with the macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
The only test we do when checking for UUID validity is that
whether all bytes are the same (invalid UUID) or not (valid
UUID). The algorithm we use is needlessly complicated.
Also, the checked UUID is not modified and hence the argument can
be of 'const' type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
In this previous commit:
commit 65491a2dfe
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Nov 12 13:58:53 2020 +0100
Do not disable incompatible-pointer-types-discards-qualifiers
We selectively rewrite G_DEFINE_TYPE to avoid warnings about
mismatched volatile/non-volatile pointers that appeared with
CLang when using GLib2 >= 2.67
We have now just hit the reverse problem, GCC >= 11 has started
warning about mismatched volatile/non-volatile pointers but only
with GLib2 < 2.67. The new GLib2 avoids the warning, as does
older GCC.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since 032548c4 @cmd was never autofree'd. Perhaps as a result of
VIR_AUTOPTR type changes occurring at roughly the same time so the
copy pasta missed this.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that no one uses VIR_AUTOSTRINGLIST it can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Glib provides g_auto(GStrv) which is in-place replacement of our
VIR_AUTOSTRINGLIST.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This will open an opportunity to modernize virDomainDiskDefParseXML()
in the next patch.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Just like virCommandPassFD, but it also returns an index of
the passed FD in the FD set.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virJSONValueObjectGetStringArray() function is given a @key
which is supposed to be an array inside given @object. Well, if
it's not then an error state is returned (NULL), but no error
message is set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The original logic is incorrect. We would delete the device entry
from eBPF map only if the newval would be same as current val in the
map. In case that the device was allowed only as read-only but later
we remove all permissions for that device it would remain in the table
with empty values.
The old code would still deny the device but it's not working as
intended. Instead we will update the value in advance. If the updated
value is 0 it means that we are removing all permissions so it should
be removed from the map, otherwise we will update the value in map.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1810356
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Kernel commit <d505b8af58912ae1e1a211fabc9995b19bd40828> added proper
check for cpu quota maximum limit to prevent internal overflow.
Even though this change is not present in all kernels it makes sense
to enforce the same limit in libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1750315
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
I previously did a workaround for a glib event loop race
that causes crashes:
commit 0db4743645
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Jul 28 16:52:47 2020 +0100
util: avoid crash due to race in glib event loop code
it turns out that the workaround has a significant performance
penalty on I/O intensive workloads. We thus need to avoid the
workaround if we know we have a new enough glib to avoid the
race condition.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When libvirt added support for firewalld, we were unable to use
firewalld's higher level rules, because they weren't detailed enough
and could not be applied to the iptables FORWARD or OUTPUT chains
(only to the INPUT chain). Instead we changed our code so that rather
than running the iptables/ip6tables/ebtables binaries ourselves, we
would send these commands to firewalld as "passthrough commands", and
firewalld would run the appropriate program on our behalf.
This was done under the assumption that firewalld was somehow tracking
all these rules, and that this tracking was benefitting proper
operation of firewalld and the system in general.
Several years later this came up in a discussion on IRC, and we
learned from the firewalld developers that, in fact, adding iptables
and ebtables rules with firewalld's passthrough commands actually has
*no* advantage; firewalld doesn't keep track of these rules in any
way, and doesn't use them to tailor the construction of its own rules.
Meanwhile, users have been complaining for some time that whenever
firewalld is restarted on a system with libvirt virtual networks
and/or nwfilter rules active, the system logs would be flooded with
warning messages whining that [lots of different rules] could not be
deleted because they didn't exist. For example:
firewalld[3536040]: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w10 -w --table filter --delete LIBVIRT_OUT
--out-interface virbr4 --protocol udp --destination-port 68
--jump ACCEPT' failed: iptables: Bad rule
(does a matching rule exist in that chain?).
(See https://bugzilla.redhat.com/1790837 for many more examples and a
discussion)
Note that these messages are created by iptables, but are logged by
firewalld - when an iptables/ebtables command fails, firewalld grabs
whatever is in stderr of the program, and spits it out to the system
log as a warning. We've requested that firewalld not do this (and
instead leave it up to the calling application to do the appropriate
logging), but this request has been respectfully denied.
But combining the two problems above ( 1) firewalld doesn't do
anything useful when you use it as a proxy to add/remove iptables
rules, 2) firewalld often insists on logging lots of
annoying/misleading/useless "error" messages when you use it as a
proxy to remove iptables rules that don't already exist), leads to a
solution - simply stop using firewalld to add and remove iptables
rules. Instead, exec iptables/ip6tables/ebtables directly in the same
way we do when firewalld isn't active.
We still need to keep track of whether or not firewalld is active, as
there are some things that must be done, e.g. we need to add some
actual firewalld rules in the firewalld "libvirt" zone, and we need to
take notice when firewalld restarts, so that we can reload all our
rules.
This patch doesn't remove the infrastructure that allows having
different firewall backends that perform their functions in different
ways, as that will very possibly come in handy in the future when we
want to have an nftables direct backend, and possibly a "pure"
firewalld backend (now that firewalld supports more complex rules, and
can add those rules to the FORWARD and OUTPUT chains). Instead, it
just changes the action when the selected backend is "firewalld" so
that it adds rules directly rather than through firewalld, while
leaving as much of the existing code intact as possible.
In order for tests to still pass, virfirewalltest also had to be
modified to behave in a different way (i.e. by capturing the generated
commandline as it does for the DIRECT backend, rather than capturing
dbus messages using a mocked dbus API).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When it is starting up, firewalld will delete all existing iptables
rules and chains before adding its own rules. If libvirtd were to try
to directly add iptables rules during the time before firewalld has
finished initializing, firewalld would end up deleting the rules that
libvirtd has just added.
Currently this isn't a problem, since libvirtd only adds iptables
rules via the firewalld "passthrough command" API, and so firewalld is
able to properly serialize everything. However, we will soon be
changing libvirtd to add its iptables and ebtables rules by directly
calling iptables/ebtables rather than via firewalld, thus removing the
serialization of libvirtd adding rules vs. firewalld deleting rules.
This will especially apparent (if we don't fix it in advance, as this
patch does) when libvirtd is responding to the dbus NameOwnerChanged
event, which is used to learn when firewalld has been restarted. In
that case, dbus sends the event before firewalld has been able to
complete its initialization, so when libvirt responds to the event by
adding back its iptables rules (with direct calls to
/usr/bin/iptables), some of those rules are added before firewalld has
a chance to do its "remove everything" startup protocol. The usual
result of this is that libvirt will successfully add its private
chains (e.g. LIBVIRT_INP, etc), but then fail when it tries to add a
rule jumping to one of those chains (because in the interim, firewalld
has deleted the new chains).
The solution is for libvirt to preface it's direct calling to iptables
with a iptables command sent via firewalld's passthrough command
API. Since commands sent to firewalld are completed synchronously, and
since firewalld won't service them until it has completed its own
initialization, this will assure that by the time libvirt starts
calling iptables to add rules, that firewalld will not be following up
by deleting any of those rules.
To minimize the amount of extra overhead, we request the simplest
iptables command possible: "iptables -V" (and aside from logging a
debug message, we ignore the result, for good measure).
(This patch is being done *before* the patch that switches to calling
iptables directly, so that everything will function properly with any
fractional part of the series applied).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Even though *we* don't call ebtables/iptables/ip6tables (yet) when the
firewalld backend is selected, firewalld does, so these binaries need
to be there; let's check for them. (Also, the patch after this one is
going to start execing those binaries directly rather than via
firewalld).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
iptables and ip6tables have had a "-w" commandline option to grab a
systemwide lock that prevents two iptables invocations from modifying
the iptables chains since 2013 (upstream commit 93587a04 in
iptables-1.4.20). Similarly, ebtables has had a "--concurrent"
commandline option for the same purpose since 2011 (in the upstream
ebtables commit f9b4bcb93, which was present in ebtables-2.0.10.4).
Libvirt added code to conditionally use the commandline option for
iptables/ip6tables in upstream commit ba95426d6f (libvirt-1.2.0,
November 2013), and for ebtables in upstream commit dc33e6e4a5
(libvirt-1.2.11, November 2014) (the latter actually *re*-added the
locking for iptables/ip6tables, as it had accidentally been removed
during a refactor of firewall code in the interim).
I say "conditionally" because a check was made during firewall module
initialization that tried executing a test command with the
-w/--concurrent option, and only continued using it for actual
commands if that test command completed successfully. At the time the
code was added this was a reasonable thing to do, as it had been less
than a year since introduction of -w to iptables, so many distros
supported by libvirt were still using iptables (and possibly even
ebtables) versions too old to have the new commandline options.
It is now 2020, and as far as I can discern from repology.org (and
manually examining a RHEL7.9 system), every version of every distro
that is supported by libvirt now uses new enough versions of both
iptables and ebtables that they all have support for -w/--concurrent.
That means we can finally remove the conditional code and simply
always use them.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All the unit tests that use iptables/ip6tables/ebtables have been
written to omit the locking/exclusive use primitive on the generated
commandlines. Even though none of the tests actually execute those
commands (and so it doesn't matter for purposes of the test whether or
not the commands support these options), it still made sense when some
systems had these locking options and some didn't.
We are now at a point where every supported Linux distro has supported
the locking options on these commands for quite a long time, and are
going to make their use non-optional. As a first step, this patch uses
the virFirewallSetLockOverride() function, which is called at the
beginning of all firewall-related tests, to set all the bools
controlling whether or not the locking options are used to true. This
means that all the test cases must be updated to include the proper
locking option in their commandlines.
The change to make actual execs of the commands unconditionally use
the locking option will be in an upcoming patch - this one affects
only the unit tests.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 912c6b22fc added abort() when the
'val' parameter is NULL along with setting the error variable for the
command. We don't want to abort in this case, just set the error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using virtCgroupNewSelf() is not correct with cgroups v2 because the
the virt-host-validate process is executed from from the same cgroup
context as the terminal and usually not all controllers are enabled
by default.
To do a proper check we need to use the root cgroup to see what
controllers are actually available. Libvirt or systemd ensures that
all controllers are available for VMs as well.
This still doesn't solve the devices controller with cgroups v2 where
there is no controller as it was replaced by eBPF. Currently libvirt
tries to query eBPF programs which usually works only for root as
regular users will get permission denied for that operation.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/94
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit b3710e9a2a.
That check is very valuable for our code, but it causes issue with glib >=
2.67.0 when building with clang.
The reason is a combination of two commits in glib, firstly fdda405b6b1b which
adds a g_atomic_pointer_{set,get} variants that enforce stricter type
checking (by removing an extra cast) for compilers that support __typeof__, and
commit dce24dc4492d which effectively enabled the new variant of glib's atomic
code for clang. This will not be necessary when glib's issue #600 [0] (8 years
old) is fixed. Thankfully, MR #1719 [1], which is supposed to deal with this
issue was opened 3 weeks ago, so there is a slight sliver of hope.
[0] https://gitlab.gnome.org/GNOME/glib/-/issues/600
[1] https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1719
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introduced by commit <22494556542c676d1b9e7f1c1f2ea13ac17e1e3e> which
fixed a CVE.
If the @path passed to virDMSanitizepath() is not a DM name or not a
path to DM name this function could return incorrect sanitized path as
it would always be the first device under /dev/mapper/.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
While it's certainly good to log events like "failed to close fd"
and "tried to close invalid fd", which are likely to be the
consequence of some bug in libvirt, logging a message every single
time a file descriptor is closed successfully is perhaps excessive
and can lead to useful information being missed among the noise.
Log filters don't help in this situation, because filtering out all
of util.file is too big a hammer and would cause important messages
to be left out as well.
To give an idea of just how much noise this single debug statement
can cause, here's a real life example from a quite large libvirtd
log I had to look at recently:
$ grep virFile libvirt.log | wc -l
1307
$ grep virFile libvirt.log | grep -v 'Closed fd' | wc -l
343
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Before commit 24d8968c, virDirClose took a DIR**, and that was never
NULL, so its declaration included ATTRIBUTE_NONNULL(1). Since that
commit, virDirClose takes a DIR*, and it may be NULL (e.g. if the DIR*
is initialized to NULL and was never closed).
Even though virDirClose() is currently only called implicitly (as the
cleanup for a g_autoptr(DIR)), and (as I've just newly learned) the
autocleanup function g_autoptr will only be called if the pointer in
question is non-null (see the definition of
_GLIB_AUTOPTR_CLEAR_FUNC_NAME in
/usr/include/glib-2.0/glib/gmacros.h), it does still cause Coverity to
complain that it *could* be called with a NULL, and it's also possible
that in the future someone might add code that explicitly calls
virDirClose.
To eliminate the Coverity complaints, and protect against the
hypothetical future where someone both explicitly calls virDirClose()
with a potentially NULL value, *and* re-enables the nonnull directive
when not building with Coverity (disabled by commit eefb881) this
patch removes the ATTRIBUTE_NONNULL(1) from the declaration of
virDirClose().
Fixes: 24d8968cd0
Reported-by: John Ferlan <jferlan@redhat.com>
Details-Research-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
After e4c29e2904 the function has one argument more and the
argument that can't be NULL moved from second to third position.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Every time we create new virCommand of OVS_VSCTL it must be
followed by virNetDevOpenvswitchAddTimeout() call which adds the
--timeout=X argument to freshly created cmd. Instead of having
this as two separate function calls it can be just one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two types of vhostuser ports:
dpdkvhostuser - OVS creates the socket and QEMU connects to it
dpdkvhostuserclient - QEMU creates the socket and OVS connects to it
But of course ovs-vsctl syntax for fetching ifname is different.
So far, we've implemented the former. The lack of implementation
for the latter means that we are not detecting the interface name
and thus not reporting it in domain XML, or failing to get
interface statistics.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We need to pass some flags in order to properly initialize the
connection otherwise it will not work. This copies what GLib does
for g_bus_get_sync() internally.
This fixes an issue with LXC driver where libvirt was not able to
register any VM with machined.
Reported-by: Matthias Maier <tamiko@gentoo.org>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using .path() for an argument to a python script meson will not
setup dependancies on the file. This means that changes to the generator
script will not trigger a rebiuld
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This code will be used to signal cases when the checkpoint is broken
either during backup or other operations where a user might want to make
decision based on the presence of the checkpoint, such as do a full
backup instead of an incremental one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'qemu_migration_cookie' module uses these. Provide a stable override
for tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virGDBusBusInit is supposed to return a reference to
requested bus type (system/session) or, if non-shared bus is
requested then create a new bus of the type. As an argument, it
gets a double pointer to GError which is passed to all g_dbus_*()
calls which allocate it on failure. Pretty standard approach.
However, since it is a double pointer we must dereference the
first level to see if the value is NULL. IOW:
if (*error)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The only caller of this function ignores failure
and just sets the unique_id to -1.
Failing to read the file is likely to the device no longer
being present, not a real error.
Stop reporting errors in this function.
https://bugzilla.redhat.com/show_bug.cgi?id=1692100
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For functions which have reasonable replacement, let's encourage usage
of g_hash_table_ alternatives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Glib's hash table provides basically the same functionality as our hash
table.
In most cases the only thing that remains in the virHash* wrappers is
NULL-checks of '@table' argument as glib's hash functions don't tolerate
NULL.
In case of iterators, we adapt the existing API of iterators to glibs to
prevent having rewrite all callers at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
We didn't use it rigorously and some helpers even cast it away. Remove
const from all hash utility functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Convert all calls to virHashForEach where it's not obvious that the
callback is _not_ deleting the current element from the hash to
virHashForEachSafe which will be deemed safe to do such operation.
Now that no iterator used with virHashForEach deletes current element we
can document that virHashForEach must not touch the hash table in any
way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
'virHashForEach' historically allowed deletion of the current element as
'virHashRemoveSet' didn't exist. To prevent us from having to deeply
analyse all iterators add virHashForEachSafe which first gets a list of
elements and iterates them outside of the hash table.
This will allow replace the internals of the hash table with other
implementation which don't allow such operation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The simplest way to write tests is to check the output against expected
output, but we must ensure that the output is stable. We can use
virHashForEachSorted as a hash iterator to ensure stable ordering.
This patch fixes 3 instances of hash iteration which is tested in
various parts, including test output changes in appropriate places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Iterate the hash elements sorted by key. This is useful to provide a
stable ordering such as in cases when the output is checked in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
All but one of the callers either use the list in arbitrary order or
sorted by key. Rewrite the function so that it supports sorting by key
natively and make it return the element count. This in turn allows to
rewrite the only caller to sort by value internally.
This allows to remove multiple sorting functions which were sorting by
key and the function will be also later reused for some hash operations
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Commit <99d2c6519ad18651b5959fa0a3366bcb2c1e44f3> removed parameter
from the function but did not modified ATTRIBUTE_NONNULL.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove mix of array length and error code in the return code.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract virPCIGetMdevTypes from PCI as virMediatedDeviceGetMdevTypes
into mdev for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that every caller to copyPlacement doesn't pass absolute path there
is no need to have a condition to handle that case.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The old code passed an absolute path to virCgroupNewFromParent() which
is not necessary. The code can take the current placement of parent
cgroup and append a relative path.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virStringSplit() to get the list of directories needed to be
created. This improves readability of the code and stops passing
absolute path to virCgroupNewFromParent().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently this task is done by virCgroupCopyPlacement when the @path
starts with "/".
virCgroupNew is always called with @path starting with "/" and there is
no parent to copy path from. To make it obvious what the code is doing
introduce new helper.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function is relevant only with cgroups v1 where it creates
hierarchy for controllers that are not managed by systemd. PID is used
to detect a placement of current process but in this situation we are
building the hierarchy for already known placement.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current code uses virCgroupNew() as a single point of entry and
calls into virCgroupDetect() as well. Both have logic for several paths
which is difficult to figure out.
Extract the actually used code path from the two functions to make
it obvious what's happening in this case.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current code uses virCgroupNew() as a single point of entry and
calls into virCgroupDetect() as well. Both have logic for several paths
which is difficult to figure out.
Extract the actually used code path from the two functions to make
it obvious what's happening in this case.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is only used for debug and error purposes which can be easily
replaced by @placement.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With cgroups v2 working with controllers is a bit more complicated then
with cgroups v1 where the controller had to be mounted.
There are two files, cgroups.controllers and cgroup.subtree_control.
The file cgroup.controllers lists all controllers enabled in the current
cgroup and cgroups.subtree_control, as the name suggest, controls which
controllers are enabled for a subtree of cgroups.
Now the issue here is that the current code doesn't make any difference
if the @parent variable is NULL or not because ../cgroup.subtree_control
will list the same controllers as ./cgroup.controllers.
The whole point of the @parent variable is when we are building the
cgroup topology ourselves without systemd help we need to detect which
controllers are enabled in the parent cgroup in order to enable them for
the current cgroup as well and for that we need to check
cgroup.controllers of the parent group.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When libvirtd starts a VM it internally stores a path to the main
cgroup. When we restart libvirtd we should get to the same state.
When we start a VM on host with systemd the cgroup is created for us and
the process is already placed into that cgroup and we detect the path
created by systemd using /proc/$PID/cgroup. After that we create
sub-cgroups and move all threads there.
Once libvirtd is restarted we again detect the cgroup path using
/proc/$PID/cgroup, but in this case we will get a different path because
the main thread was moved to a "emulator" cgroup.
Instead of ignoring the "emulator" directory when validating cgroups
remove it completely when detecting cgroup otherwise cgroups will not
work properly when libvirtd is restarted.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With cgroups v2 the file cgroup.procs will never be empty if threading
is enabled as it will always have ID of all processes even if all
threads of the processes are moved to sub-cgroups. If that happens the
file cgroup.threads will be empty.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After converting all DIR* to g_autoptr(DIR), many cleanup: labels
ended up just having "return ret", and every place that set ret would
just immediately goto cleanup. Remove the cleanup label and its
return, and just return the set value immediately, thus eliminating
the need for the return variable itself.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Once the DIR* in virPCIGetName() was made g_autoptr, the cleanup:
label just had a "return ret;", but the rest of the function was more
compilcated than it needed to be, doing funky things with the value of
ret inside multi-level conditionals and a while loop that might exit
early via a break with ret == 0 or exit early via a goto cleanup with
ret == -1.
It really didn't need to be nearly as complicated. After doing the
trivial replacements of "goto cleanup" with appropriate direct
returns, it became obvious that:
1) the outermost level of the nested conditional at the end of the
function ("if (ret < 0)") was now redundant, since ret is now
*always* < 0 by that point (otherwise the function has returned).
2) by switching the sense of the next level of the conditional (making
it "if (!physPortID)", the "else" (which is now just "return 0;"
becomes the "if", and the new "else" no longer needs to be inside
the conditional.
3) the value of firstEntryName can be moved into *netname with
g_steal_pointer()
Once that is all done, ret is no longer used and can be removed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since every single use of DIR* was converted to use g_autoptr, this
function is not currently needed. Even if someone comes up with a
usage for a non-g_autoptr DIR* in the future, they can just use
virDirClose(), since there is no longer a semantic difference between
the two (VIR_DIR_CLOSE() previously had an extra & on the pointer so
that it could be transparently passed as a DIR** to virDirClose(), but
that was removed several commits back.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In order to make a usable g_autoptr(DIR), we need to have a close
function that is a NOP when the pointer is NULL, but takes a simple
DIR*. But virDirClose() (candidate to be the g_autoptr cleanup
function) currently takes a DIR**, not DIR*. It does this so that it
can clear the pointer, thus making it safe to call virDirClose on the
same DIR multiple times.
In the past the clearing of the DIR* was essential in a few places,
but those few places have now been changed, so we can modify
virDirClose() to take a DIR*, and remove the side effect of clearing
the DIR*. This will make it directly usable as the g_autoptr cleanup,
and will mean that this:
{
DIR *dirp = NULL;
blah blah ...
VIR_DIR_CLOSE(dirp)
}
is functionally identical to
{
g_autoptr(DIR) dirp = NULL;
blah blah ...
}
which will make conversion to using g_autoptr mechanical and simple to review.
(Note that virDirClose() will still check for NULL before attempting
to close, so that it can always be safely called, as long as the DIR*
was initialized to NULL (another prerequisite of becoming a g_autoptr
cleanup function)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
DIR *dh is being re-used each time through the for loop of this
function, so it must be closed and then re-opened, which means we
can't convert it to g_autoptr. By moving the definition of dh inside
the for loop, we make it possible to trivially convert to g_autoptr
(which will happen in a subsequent patch)
NB: VIR_DIR_CLOSE() is already called at the bottom of the for loop,
so removing the VIR_DIR_CLOSE() at the end of the function is *not*
creating a leak of a DIR*!
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will make it easier to review upcoming patches that use g_autoptr
to auto-close all DIRs.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The cpu mask was free()'d immediately on any error and at the end of the
function, where it was expected that it would either error out and return or
goto another allocation if the code was to fail. However since commit
9514e24984 the error path did not return in one new case which caused
double-free in such situation. In order to make the code more straightforward
just free the mask after it's been used even before checking the return code of
the call.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1819801
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since we use virHashTable for string-keyed values only, we can remove
all the callbacks which allowed universal keys.
Code which wishes to use non-string keys should use glib's GHashTable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All users of virHashTable pass strings as the name/key of the entry.
Make this an official requirement by turning the variables to 'const
char *'.
For any other case it's better to use glib's GHashTable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The only place we call it is in virHashNew. Move the code to virHashNew
and remove virHashCreateFull.
Code wishing to use non-strings as hash table keys will be better off
using glib's GHashTable directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It doesn't make much sense to configure the bucket count in the hash
table for each case specifically. Replace all calls of virHashCreate
with virHashNew which has a pre-set size and remove virHashCreate
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove 'cleanup' label and simplify remembering of the returned value
from the callback.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rewrite using GHashTable which already has interfaces for using a number
as hash key. Glib's implementation doesn't copy the key by default, so
we need to allocate it, but overal the interface is more suited for this
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It's used only in one place in tests which isn't even automatically
evaluated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virCgroupKillRecursive sneakily initializes 'ret' to 0 rather than the
usual -1. 401030499b moved an error condition but didn't actually
modify 'ret' return the proper error code.
Fixes: 401030499b
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virPCIDeviceAddressGetSysfsFile() is simpler to call.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These were nops once enough cleanup was g_auto'd.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
thisPhysPortID is only used inside a conditional, so reduce its scope
to just the body of that conditional, which will eliminate the need
for the undesirable manual VIR_FREE().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function had a loop that was only executed twice; it was
artificially constructed with a label, a goto, and a boolean to tell
that it had already been executed once. Aside from that, the body of
the loop contained only two lines that needed to be repeated (the
second time through, everything beyond those two lines would be
skipped).
One side effect of this strange loop was that a g_autofree string was
manually freed and re-initialized; I've been told that manually
freeing a g_auto_free object is highly discouraged.
This patch refactors the function to simply repeat the 2 lines that
might possibly be executed twice, thus eliminating the ugly use of
goto to construct a loop, and also takes advantage of the fact that
virPCIDriverDir() was previously returning *exactly* the same string
both times it was called to eliminate the manual VIR_FREE of drvpath.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is no need for a temporary variable in this function, and since
it can't return NULL, no need for callers to check for it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is no need for a temporary variable in this function, and ever
since we switched to glib for memory allocation, there is no possibility
it can return NULL, so callers don't need to check for it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When this function was recently changed to add in parsing of
IFLA_VF_STATS, I noticed that the checks for existence of IFLA_VF_MAC
and IFLA_VF_VLAN were looking in the *wrong array*. The array that
contains the results of parsing each IFLA_VFINFO in
tb[IFLA_VFINFO_LIST] is tb_vf, but we were checking for these in tb
(which is the array containing the results of the toplevel parsing of
the netlink message, *not* the results of parsing one of the nested
IFLA_VFINFO's.
This incorrect code has been here since the function was originally
written in 2012. It has only worked all these years due to coincidence
- the items at those indexes in tb are IFLA_ADDRESS and IFLA_BROADCAST
(of the *PF*, not of any of its VFs), and those happen to always be
present in the toplevel netlink message; since we are only looking in
the incorrect place to check for mere existence of the attribute (but
are doing the actual retrieval of the attribute from the correct
place), this bug has no real consequences other than confusing anyone
trying to understand the code.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virNetDevParseVfConfig has became a multifunctional helper function,
rename it to virNetDevParseVfInfo.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Laine Stump <laine@redhat.com>
libvirt can retrieve traffic stats for emulated interfaces that are
backed by tap or macvtap devices, but this information wasn't
available for hostdev interfaces (those that are implemented by
assigning an SR-IOV VF device to a guest using vfio):
#virsh domifstat instance --interface=52:54:00:2d:b2:35
error: Failed to get interface stats instance 52:54:00:2d:b2:35
error: internal error: Interface name not provided
For some SR-IOV VF devices this information is available via the
netlink VFINFO_LIST request/response, and that is what this patch uses
to implement stats retrieval for VF. Not that this is dependent on
support in the PF driver - for example, the Mellanox ConnectX-4 Lx
(mlx5) driver reports usable stats, while Intel 82599 (ixgbe) and
82576 (igb) just report all stats as 0. (this is the same result as
"ip -s link show").
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Laine Stump <laine@redhat.com>
By default, pfifo_fast queueing discipline (qdisc) is set on
newly created interfaces (including TAPs). This qdisc has three
queues and packets that want to be sent through given NIC are
placed into one of the queues based on TOS field. Queues are then
emptied based on their priority allowing interactive sessions
stay interactive whilst something else is downloading a large
file.
Obviously, this means that kernel has to be involved and some
locking has to happen (when placing packets into queues). If
virtualization is taken into account then the above algorithm
happens twice - once in the guest and the second time in the
host.
This is arguably not optimal as it burns host CPU cycles
needlessly. Guest already made it choice and sent packets in the
order it wants.
To resolve this, Linux kernel offers 'noqueue' qdisc which can be
applied on virtual interfaces and in fact for 'lo' it is by
default:
lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
Set it for other TAP devices we create for domains too. With this
change I was able to squeeze 1Mbps more from a macvtap attached
to a guest and to my 1Gbps LAN (as measured by iperf3).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This helper changes the root qdisc on given interface.
Ideally, it would be written using netlink but my attempts to
write the code were not successful and thus I've fallen back to
virCommand() + tc.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently setting max_len=0 causes virtlogd to spin in a busy loop. It
is natural to allow this to disable log rollover which can be useful for
developers debugging things.
Note disabling rollover exposes the host to denial of service from a
malicious guest, so must be used with care.
Closes https://gitlab.com/libvirt/libvirt/-/issues/85
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The aim of virSocketAddrPrefixToNetmask() is to initialize passed
virSocketAddr structure based on prefix length and family.
However, it doesn't set all members in the struct which may lead
to reads of uninitialized values:
==15421== Use of uninitialised value of size 8
==15421== at 0x50F297A: _itoa_word (in /lib64/libc-2.31.so)
==15421== by 0x510C8FE: __vfprintf_internal (in /lib64/libc-2.31.so)
==15421== by 0x5120295: __vsnprintf_internal (in /lib64/libc-2.31.so)
==15421== by 0x50F8969: snprintf (in /lib64/libc-2.31.so)
==15421== by 0x51BB602: getnameinfo (in /lib64/libc-2.31.so)
==15421== by 0x496DEE0: virSocketAddrFormatFull (virsocketaddr.c:486)
==15421== by 0x496DD9F: virSocketAddrFormat (virsocketaddr.c:444)
==15421== by 0x11871F: networkDnsmasqConfContents (bridge_driver.c:1404)
==15421== by 0x1118F5: testCompareXMLToConfFiles (networkxml2conftest.c:48)
==15421== by 0x111BAF: testCompareXMLToConfHelper (networkxml2conftest.c:112)
==15421== by 0x112679: virTestRun (testutils.c:142)
==15421== by 0x111D09: mymain (networkxml2conftest.c:144)
==15421== Uninitialised value was created by a stack allocation
==15421== at 0x1175D2: networkDnsmasqConfContents (bridge_driver.c:1056)
All callers expect the function to initialize the structure
fully.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
As preparation for g_autoptr() we need to change the function to take
only virCgroupPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
We don't use the lib prefix for all libraries but in these cases it
makes sense to use the prefix.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Validation is usually performed on an entire document. If we are only
interested in validating a single nested node that can occur in
different contexts, this would require writing different schemas for
any of those different contexts.
By temporarily replacing the document's root node, we can validate the
relevant node only.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are only 3 places using the function. Two can use virBitmapNewCopy
directly. In case of the qemu capabilities code we need to free the old
bitmap first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virBitmapCopy has a failure condition, which is impossible to meet when
creating a new copy. Copy the contents directly to make it obvious that
virBitmapNewCopy can't fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer report any errors so all callers can be replaced by
virBitmapNew. Additionally virBitmapNew can't return NULL now so error
handling is not necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now always return a valid pointer or crash so the return value
doesn't need to be checked.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the condition which would make virBitmapNewQuiet fail to possibly
overallocate by 1 rather than failing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now have APIs which automatically expand the bitmap and also API
which allocates a 0 size bitmap. Remove the condition from virBitmapNew.
Effectively reverts ce49cfb48a
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virBitmapNewEmpty() can create a bitmap with 0 length. With such a
bitmap virBitmapToString will return NULL rather than an empty string.
Initialize the buffer to avoid that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Clarify which bit is considered most significant in the bitmap and
resulting string. Also be explicit that it's a hex string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's only one combination used so we can remove the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When VIR_EXEC_DAEMON is true and cmd->pidfile exists, the parent
will expect the pidfile to be written before exiting, sitting
tight in a saferead() call waiting.
The child then does process tuning (via virProcessSet* functions)
before writing the pidfile. Problem is that these tunings can
fail, and trigger a 'fork_error' jump, before cmd->pidfile is
written. The result is that the process was aborted in the
child, but the parent is still hang in the saferead() call.
This behavior can be reproduced by trying to create and execute
a QEMU guest in user mode (e.g. using qemu:///session as non-root).
virProcessSetMaxMemLock() will fail if the spawned libvirtd user
process does not have CAP_SYS_RESOURCE capability. setrlimit() will
fail, and a 'fork_error' jump is triggered before cmd->pidfile
is written. The parent will hung in saferead() indefinitely. From
the user perspective, 'virsh start <guest>' will hang up
indefinitely. CTRL+C can be used to retrieve the terminal, but
any subsequent 'virsh' call will also hang because the previous
libvirtd user process is still there.
We can fix this by moving all virProcessSet*() tuning functions
to be executed after cmd->pidfile is taken care of. In the case
mentioned above, this would be the result of 'virsh start'
after this patch:
error: Failed to start domain vm1
error: internal error: Process exited prior to exec: libvirt: error :
cannot limit locked memory to 79691776: Operation not permitted
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1882093
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Lack of this one function (which is called for each active tap device
every time libvirtd is started) is the one thing preventing a
"WITHOUT_LIBNL" build of libvirt from being useful. With this
alternate implementation, guests using standard tap devices will work
properly even when libvirt is built without libnl support.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There was one stray bit of code in virnetdev.c that required libnl to
build, but wasn't qualified by defined(WITH_LIBNL). Adding that, plus
putting a similar check around a static function only used by that
aforementioned code, makes libvirt build properly without libnl3-devel
installed.
How useful it is in that state is a separate issue :-)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This flag was originally created to indicate that either 1) the build
platform wasn't linux, 2) the build platform was linux, but the kernel
was too old to have macvtap support. Since there was already a switch
there, the ability to also disable it when 3) the kernel supports
macvtap but the user doesn't want it, was added in. I don't think that
(3) was ever an intentional goal, just something that grew naturally
out of having the flag there in the first place (unless possibly the
original author wanted a way to quickly disable their new code in case
it caused regressions elsewhere).
Now that the check for (2) has been removed, WITH_MACVTAP is just
checking (1) and (3), but (3) is pointless (because the extra code in
libvirt itself is miniscule, and the only external library needed for
it is libnl, which is also required for other unrelated features (and
itself has no subordinate dependencies and takes up < 1MB on
disk)). We can therfore eliminate the WITH_MACVTAP flag, as it is
functionally equivalent to WITH_LIBNL (which implies __linux__).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
macvlan support was added to the Linux kernel in 2.6.33, but
MACVLAN_MODE_PASSTHRU wasn't added until 2.6.38, so a workaround had
been put in place to define that constant on those few systems where
it was missing. It's useful like was probably 6 months at most, but
it's been there for over 10 years.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
WITH_VIRTUALPORT just checks that we are building on Linux and that
IFLA_PORT_MAX is defined in linux/if_link.h. Back when 802.11Qb[gh]
support was added, the IFLA_* stuff was new (introduced in kernel
2.6.35, backported to RHEL6 2.6.32 kernel at some point), and so this
extra check was necessary, because libvirt was being built on Linux
distros that didn't yet have IFLA_* (e.g. older RHEL6, all
RHEL5). It's been in the kernel for a *very* long time now, so all
supported versions of all Linux platforms libvirt builds on have it.
Note that the above paragraph implies that the conditional compilation
should be changed to #if defined(__linux__). However, the astute
reader will notice that the code in question is sending and receiving
netlink messages, so it really should be conditional on WITH_LIBNL
(which implies __linux__) instead, so that's what this patch does.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
WITH_LIBNL will only be defined on Linux platforms (because libnl is a
library written to encapsulate parts of netlink, which is a Linux-only
API), so it's redundant to write:
#if defined(__linux__) && defined(WITH_LIBNL)
We can just check for WITH_LIBNL.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
IFLA_VF_MAX was introduced to the Linux kernel in 2.6.35, and was even
backported to the RHEL*6* 2.6.32 kernel downstream, so it is present
in all supported versions of all Linux distros that libvirt builds
on. Additionally, it can't be conditionally compiled out of a
kernel. There is no reason to conditionalize any piece of code on
presence of IFLA_VF_MAX - if the platform is Linux, it is supported.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The former has been present since
commit f43798c27684ab925adde7d8acc34c78c6e50df8
Author: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu Jul 3 03:48:02 2008 -0700
tun: Allow GSO using virtio_net_hdr
and the latter since
commit bbb009941efaece3898910a862f6d23aa55d6ba8
Author: Jason Wang <jasowang@redhat.com>
Date: Wed Oct 31 19:45:59 2012 +0000
tuntap: introduce multiqueue flags
these are old enough that they can be assumed present in all Linux
platforms we support. The tap device creation code changed is specific
to Linux, with a separate impl for non-Linux platforms.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This flag was added by Linux with:
commit f43798c27684ab925adde7d8acc34c78c6e50df8
Author: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu Jul 3 03:48:02 2008 -0700
tun: Allow GSO using virtio_net_hdr
so we can assume all Linux distros we support have this flag available
and thus the compile time check is sufficient.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add an abort() on the class/object allocation failures so that
virStorageSourceNew() always returns a virStorageSource and remove
checks from all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
g_thread_join() eats a reference.
==295055== Invalid read of size 4
==295055== at 0x4DA4AE4: g_thread_unref (in /usr/lib64/libglib-2.0.so.0.6400.5)
==295055== by 0x491D5FA: vir_event_thread_finalize (vireventthread.c:47)
==295055== by 0x4E6BCFF: g_object_unref (in /usr/lib64/libgobject-2.0.so.0.6400.5)
==295055== by 0x22F35CF4: qemuProcessQMPFree (qemu_process.c:8525)
==295055== by 0x22E71B58: glib_autoptr_clear_qemuProcessQMP (qemu_process.h:237)
...
==295055== by 0x22E98A29: qemuDomainPostParseDataAlloc (qemu_domain.c:5476)
==295055== by 0x49ABF83: virDomainDefPostParse (domain_conf.c:6023)
==295055== Address 0x2acb1c68 is 24 bytes inside a block of size 88 free'd
==295055== at 0x483B9F5: free (vg_replace_malloc.c:538)
==295055== by 0x4D80A4C: g_free (in /usr/lib64/libglib-2.0.so.0.6400.5)
...
==295055== by 0x491D5F1: vir_event_thread_finalize (vireventthread.c:46)
==295055== by 0x4E6BCFF: g_object_unref (in /usr/lib64/libgobject-2.0.so.0.6400.5)
==295055== by 0x22F35CF4: qemuProcessQMPFree (qemu_process.c:8525)
==295055== by 0x22E71B58: glib_autoptr_clear_qemuProcessQMP (qemu_process.h:237)
...
==295055== Block was alloc'd at
==295055== at 0x483A809: malloc (vg_replace_malloc.c:307)
==295055== by 0x4D80958: g_malloc (in /usr/lib64/libglib-2.0.so.0.6400.5)
...
==295055== by 0x4DA4C32: g_thread_try_new (in /usr/lib64/libglib-2.0.so.0.6400.5)
==295055== by 0x491D3BC: virEventThreadStart (vireventthread.c:159)
==295055== by 0x491D3BC: virEventThreadNew (vireventthread.c:185)
...
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: f4fc3db920
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
g_variant_iter_loop() handles freeing all arguments unless we break out
of the loop, in that case we have to free them manually.
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We used to check the format of reply data with libdbus so we should do
the same with GLib DBus as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to pass pointer to `array`.
Reported-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
virFileComparePaths just return 0 or 1 after commit 7b48bb8
so break while after virFileComparePaths return 1
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yi Li <yili@winhong.com>
An extra parameter was added to virQEMUBuildQemuImgKeySecretOpts in
commit ecfc4094d8
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Sep 15 16:30:37 2020 +0100
storage: add support for qcow2 LUKS encryption
but the non-null pointer annotations were not adjusted to take account.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The storage driver was wired up to support creating raw volumes in LUKS
format, but was never adapted to support LUKS-in-qcow2. This is trivial
as it merely requires the encryption properties to be prefixed with
the "encrypt." prefix, and "encrypt.format=luks" when creating the
volume.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Crypt method number 2 indicates LUKS format.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With libdbus our wrappers had a special syntax to create the DBus
messages by defining the DBus message signature followed by list
of arguments providing data based on the signature.
There will be no similar helper with GLib implementation as they
provide same functionality via GVariant APIs. The syntax is slightly
different mostly for how arrays, variadic types and dictionaries are
created/parsed.
Additional difference is that with GLib DBus everything is wrapped in
extra tuple (struct). For more details refer to the documentation [1].
[1] <https://developer.gnome.org/glib/stable/gvariant-format-strings.html>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The original motivation for adding virNetDevIPCheckIPv6Forwarding
(commit 00d28a78b5) was that networking routes would disappear when
ipv6 forwarding was enabled for an interface.
This is a fairly undocumented side-effect of the "accept_ra" sysctl
for an interface. 1 means the interface will accept_ra's if not
forwarding, 2 means always accept_RAs; but it is not explained that
enabling forwarding when accept_ra==1 will also clear any kernel RA
assigned routes, very likely breaking your networking.
The check to warn about this currently uses netlink to go through all
the routes and then look at the accept_ra status of the interfaces.
However, it has been noticed that this problem does not affect systems
where IPv6 RA configuration is handled in userspace, e.g. via tools
such as NetworkManager. In this case, the error message from libvirt
is spurious, and modifying the forwarding state will not affect the RA
state or disable your networking.
If you refer to the function rt6_purge_dflt_routers() in the kernel,
we can see that the routes being purged are only those with the
kernel's RTF_ADDRCONF flag set; that is, routes added by the kernel's
RA handling. Why does it do this? I think this is a Linux
implementation decision; it has always been like that and there are
some comments suggesting that it is because a router should be
statically configured, rather than accepting external configurations.
The solution implemented here is to convert the existing check into a
walk of /proc/net/ipv6_route (because RTF_ADDRCONF is apparently not
exposed in netlink) and look for routes with this flag set. We then
check the accept_ra status for the interface, and if enabling
forwarding would break things raise an error.
This should hopefully avoid "interactive" users, who are likely to be
using NetworkManager and the like, having false warnings when enabling
IPv6, but retain the error check for users relying on kernel-based
IPv6 interface auto-configuration.
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cedric Bosdonnat <CBosdonnat@suse.com>
In v6.7.0-rc1~86 I've tried to fix a problem where we were not
detecting NUMA nodes properly because we misused behaviour of a
libnuma API and as it turned out the behaviour was correct for
hosts with 64 CPUs in one NUMA node. So I changed the code to use
nodemask_isset(&numa_all_nodes, ..) instead and it fixed the
problem on such hosts. However, what I did not realize is that
numa_all_nodes does not reflect all NUMA nodes visible to
userspace, it contains only those nodes that the process
(libvirtd) an allocate memory from, which can be only a subset of
all NUMA nodes. The bitmask that contains all NUMA nodes visible
to userspace and which one I should have used is: numa_nodes_ptr.
For curious ones:
4a22f22382
And as I was fixing virNumaGetNodeCPUs() I came to realize that
we already have a function that wraps the correct bitmask:
virNumaNodeIsAvailable().
Fixes: 24d7d85208
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1876956
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function was introduced in the 2.0.6 release which happened
in December 2010. I think it is safe to assume that all libnuma
we deal with have the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since we no longer need to wait for IPv6 DAD to complete, we never
call this function.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are currently adding -lutil and -lkvm to the linker using the
add_project_link_arguments method. On FreeBSD 11.4, this results in
build errors because the args appear too early in the command line.
We need to pass the libraries as dependencies so that they get placed
at the same point in the linker args as other dependencies.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When starting a domain with <numatune/> set libvirt translates
given NUMA nodes into a set of host CPUs which is then used to
QEMU process affinity. But, if the numatune contains a
non-existent NUMA node then the translation fails with no error
reported. This is because virNumaNodesetToCPUset() calls
virNumaGetNodeCPUs() and expects it to report an error on
failure. Well, it does except for non-existent NUMA nodes. While
this behaviour might look strange it is actually desired because
of how we construct host capabilities. The virNumaGetNodeCPUs()
is called from virCapabilitiesHostNUMAInitReal() where we do not
want any error reported for non-existent NUMA nodes.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1724866
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
'blockdev-create' allows us to create the image with a custom cluster
size if we wish to. Wire it up for 'qcow2'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It it useful to be sure no thread is running after we drop all references to
virEventThread. Otherwise in order to avoid crashes we need to synchronize some
other way or we make extra references in event handler callbacks to all the
object in use. And some of them are not prepared to be refcounted.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Stop just send signal for threads to exit when they finish with
current task. Drain waits when all threads will finish.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Even if we have no priority threads on pool creation we can add them thru
virThreadPoolSetParameters later.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The conditional was removed in
commit ebbf8ebe4f
Author: Ján Tomko <jtomko@redhat.com>
Date: Tue Sep 1 22:56:37 2020 +0200
util: virnetdevtap: stats: fix txdrop on FreeBSD
That commit was correct about this no longer being required for FreeBSD,
but missed that the code is also built on macOS.
Rather than testing for this field in meson though, we can simply use
a platform conditional test in the code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Local socket connections were outright disabled because there was no "server"
part in the URI. However, given how requirements and usage scenarios are
evolving, some management apps might need the source libvirt daemon to connect
to the destination daemon over a UNIX socket for peer2peer migration. Since we
cannot know where the socket leads (whether the same daemon or not) let's decide
that based on whether the socket path is non-standard, or rather explicitly
specified in the URI. Checking non-standard path would require to ask the
daemon for configuration and the only misuse that it would prevent would be a
pretty weird one. And that's not worth it. The assumption is that whenever
someone uses explicit UNIX socket paths in the URI for migration they better
know what they are doing.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
For older FreeBSD, we needed an ifdef guard to use
if_data.ifi_oqdrops, which was introduced by:
commit 61bbdbb94c
Implement interface stats for BSD
But when we dropped the check because we deprecated
building on FreeBSD-10 in:
commit 83131d9714
configure: drop check for unsupported FreeBSD
We started building the wrong side of the ifdef.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 83131d9714
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Currently, we are mixing: #if HAVE_BLAH with #if WITH_BLAH.
Things got way better with Pavel's work on meson, but apparently,
mixing these two lead to confusing and easy to miss bugs (see
31fb929eca for instance). While we were forced to use HAVE_
prefix with autotools, we are free to chose our own prefix with
meson and since WITH_ prefix appears to be more popular let's use
it everywhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are couple of conditional #includes at the beginning of
virfile.c and they try to be nice and document #endifs. But they
are mostly wrong because either they have the condition in the
comment inverted or the comment refers to a different condition
than they belong to. Just remove the comments as these #includes
are single line mostly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two places where we try to check whether the host
system has net/if.h before including it. But the check is missing
'_H' suffix.
Fixes: 7f3eb533f4
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
When creating a standard tap device, if provided with an ifname that
contains "%d", rather than taking that literally as the name to use
for the new device, the kernel will instead use that string as a
template, and search for the lowest number that could be put in place
of %d and produce an otherwise unused and unique name for the new
device. For example, if there is no tap device name given in the XML,
libvirt will always send "vnet%d" as the device name, and the kernel
will create new devices named "vnet0", "vnet1", etc. If one of those
devices is deleted, creating a "hole" in the name list, the kernel
will always attempt to reuse the name in the hole first before using a
name with a higher number (i.e. it finds the lowest possible unused
number).
The problem with this, as described in the previous patch dealing with
macvtap device naming, is that it makes "immediate reuse" of a newly
freed tap device name *much* more common, and in the aftermath of
deleting a tap device, there is some other necessary cleanup of things
which are named based on the device name (nwfilter rules, bandwidth
rules, OVS switch ports, to name a few) that could end up stomping
over the top of the setup of a new device of the same name for a
different guest.
Since the kernel "create a name based on a template" functionality for
tap devices doesn't exist for macvtap, this patch for standard tap
devices is a bit different from the previous patch for macvtap - in
particular there was no previous "bitmap ID reservation system" or
overly-complex retry loop that needed to be removed. We simply find
and unused name, and pass that name on to the kernel instead of
"vnet%d".
This counter is also wrapped when either it gets to INT_MAX or if the
full name would overflow IFNAMSIZ-1 characters. In the case of
"vnet%d" and a 32 bit int, we would reach INT_MAX first, but possibly
someday someone will change the name from vnet to something else.
(NB: It is still possible for a user to provide their own
parameterized template name (e.g. "mytap%d") in the XML, and libvirt
will just pass that through to the kernel as it always has.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There have been some reports that, due to libvirt always trying to
assign the lowest numbered macvtap / tap device name possible, a new
guest would sometimes be started using the same tap device name as
previously used by another guest that is in the process of being
destroyed *as the new guest is starting.
In some cases this has led to, for example, the old guest's
qemuProcessStop() code deleting a port from an OVS switch that had
just been re-added by the new guest (because the port name is based on
only the device name using the port). Similar problems can happen (and
I believe have) with nwfilter rules and bandwidth rules (which are
both instantiated based on the name of the tap device).
A couple patches have been previously proposed to change the ordering
of startup and shutdown processing, or to put a mutex around
everything related to the tap/macvtap device name usage, but in the
end no matter what you do there will still be possible holes, because
the device could be deleted outside libvirt's control (for example,
regular tap devices are automatically deleted when the qemu process
terminates, and that isn't always initiated by libvirt but could
instead happen completely asynchronously - libvirt then has no control
over the ordering of shutdown operations, and no opportunity to
protect it with a mutex.)
But this only happens if a new device is created at the same time as
one is being deleted. We can effectively eliminate the chance of this
happening if we end the practice of always looking for the lowest
numbered available device name, and instead just keep an integer that
is incremented each time we need a new device name. At some point it
will need to wrap back around to 0 (in order to avoid the IFNAMSIZ 15
character limit if nothing else), and we can't guarantee that the new
name really will be the *least* recently used name, but "math"
suggests that it will be *much* less common that we'll try to re-use
the *most* recently used name.
This patch implements such a counter for macvtap/macvlan, replacing
the existing, and much more complicated, "ID reservation" system. The
counter is set according to whatever macvtap/macvlan devices are
already in use by guests when libvirtd is started, incremented each
time a new device name is needed, and wraps back to 0 when either
INT_MAX is reached, or when the resulting device name would be longer
than IFNAMSIZ-1 characters (which actually is what happens when the
template for the device name is "maccvtap%d"). The result is that no
macvtap name will be re-used until the host has created (and possibly
destroyed) 99,999,999 devices.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On some platforms libm (needed for the pow() function) isn't being
linked in somehow. This patch adds the necessary bits to assure that
it's linked in when necessary.
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 20a62b42ec001310a6329d7ee2021f0737d534ef)
Driver module loaders current hardcode ".so" as the file
extension. On MacOS, meson uses ".dylib" as a module file extension.
This patch adds VIR_FILE_MODULE_EXT to virfile.h defined as the
hosts module extension, and updates driver module loaders to make
use of it.
Signed-off-by: Scott Shambarger <scott-libvirt@shambarger.net>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Previous patch handled the runtime case where a non-x86 host is
fetching /proc/cpuinfo data for a microcode info that we know
it doesn't exist. This change alone speeded everything by a
bit for non-x86, but there is at least one major culprit left.
qemuxml2argvtest does several arch-specific tests, and a good
chunk of them are x86 exclusive. This means that 'hostArch'
will be seen as x86 for these tests, even when running in
non-x86 hosts. In a Power 9 server with 128 CPUs, qemuxml2argvtest
takes 298 seconds to complete in average, and 'perf record'
indicates that 95% of the time is spent in
virHostCPUGetMicrocodeVersion().
This patch mocks virHostCPUGetMicrocodeVersion() to always return
0 in the tests, avoiding /proc/cpuinfo reads. This will make all
tests behave arch-agnostic, and the microcode value being 0 has no
impact on any existing test.
This is a CI speed across the board for all archs, including x86,
given that we're not reading /proc/cpuinfo in the tests. For
a Thinkpad T480 laptop with 8 Intel i7 CPUs, qemuxml2argvtest
went from 15.50 sec to 12.50 seconds. The performance gain is even
more noticeable for huge servers with lots of CPUs. For the
Power 9 server mentioned above, this patch speeds qemuxml2argvtest
to 9 seconds, down from 298 sec.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Non-x86 archs does not have a 'microcode' version like x86. This is
covered already inside the function - just return 0 if no microcode
is found. Regardless of that, a read of /proc/cpuinfo is always made.
Each read will invoke the kernel to fill in the CPU details every time.
Now let's consider a non-x86 host, like a Power 9 server with 128 CPUs.
Each /proc/cpuinfo read will need to fetch data for each CPU and it
won't even matter because we know beforehand that PowerPC chips don't
have microcode information.
We can do better for non-x86 hosts by skipping this process entirely.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_autofree and remove the cleanup label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since the macro no longer includes the 'ignore_value'
statement, stop putting another empty statement after it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The VIR_XPATH_NODE_AUTORESTORE contains an ignore_value
statement to silence an unused variable warning on clang.
Use a pragma instead, which is not a statement.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_CGROUP_BACKEND_CALL is exclusively used at the end
of a function, but it declares a variable.
Wrap it in a do..while block.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Declare the variables at the beginning of the function,
then fill them up.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Many of our functions start with a DEBUG statement.
Move the statements after declarations to appease
our coding style.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split those initializations that depend on a statement
above them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree and move the declarations to the beginning
of the block.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Repeat the whole function header instead of mixing #ifdefs
in the code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 4362068979 moved the function to
util/virqemu.c which is compiled also on win32 and geteuid()/getegid()
doesn't exist there.
Move it to qemu_domain.c which is compiled only when the qemu driver is
enabled. Originally I didn't want to put it here as qemu_domain.c is a
code dump for helper functions but this is the least invasive fix.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is similar to one of previous patches.
When receiving stream (on virStorageVolUpload() and subsequent
virStreamSparseSendAll()) we may receive a hole. If the volume we
are saving the incoming data into is a regular file we just
lseek() and ftruncate() to create the hole. But this won't work
if the file is a block device. If that is the case we must write
zeroes so that any subsequent reader reads nothing just zeroes
(just like they would from a hole in a regular file).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1852528
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When handling sparse stream, a thread is executed. This thread
runs a read() or write() loop (depending what API is called; in
this case it's virStorageVolDownload() and this the thread run
read() loop). The read() is handled in virFDStreamThreadDoRead()
which is then data/hole section aware, meaning it uses
virFileInData() to detect data and hole sections and sends
TYPE_DATA or TYPE_HOLE virStream messages accordingly.
However, virFileInData() does not work with block devices. Simply
because block devices don't have data and hole sections. What we
can do though, is to mimic being always in a DATA section.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1852528
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a very distant past, we came around machines that has not
continuous node IDs. This made us error out when constructing
capabilities XML. We resolved it by utilizing strange behaviour
of numa_node_to_cpus() in which it returned a mask with all bits
set for a non-existent node. However, this is not the only case
when it returns all ones mask - if the node exists and has enough
CPUs to fill the mask up (e.g. 128 CPUs).
The fix consists of using nodemask_isset(&numa_all_nodes, ..)
prior to calling numa_node_to_cpus() to determine if the node
exists.
Fixes: 628c935747
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1860231
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After previous cleanups, some labels in some functions have
nothing but 'return' statement in them. Drop the labels and
replace 'goto'-s with respective return statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Again, instead of closing FDs explicitly, we can automatically
close them when they go out of their respective scopes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A cleanup function can be declared for virFDStreamMsg type so
that the structure doesn't have to be freed explicitly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All callers of virFDStreamMsgQueuePush() have the same pattern:
they explicitly set @msg passed to NULL to avoid freeing it later
on. Well, the function can take address of the pointer and clear
it for them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The buffer that allocated in the virFDStreamThreadDoRead() can be
automatically freed, or if saved into the message structure it
can be stolen.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, only ENOENT is ignored (to deal with kernels without
devmapper). However, as reported on the list, under certain
scenarios a different error can occur. For instance, when libvirt
is running inside a container which doesn't have permissions to
talk to the devmapper. If this is the case, then open() returns
-1 and sets errno=EPERM.
Assuming that multipath devices are fairly narrow use case and
using them in a restricted container is even more narrow the best
fix seems to be to ignore all open errors BUT produce a warning
on failure. To avoid flooding logs with warnings on kernels
without devmapper the level is reduced to a plain debug message.
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In one of my latest patch (v6.6.0~30) I was trying to remove
libdevmapper use in favor of our own implementation. However, the
code did not take into account that device mapper can be not
compiled into the kernel (e.g. be a separate module that's not
loaded) in which case /proc/devices won't have the device-mapper
major number and thus virDevMapperGetTargets() and/or
virIsDevMapperDevice() fails.
However, such failure is safe to ignore, because if device mapper
is missing then there can't be any multipath devices and thus we
don't need to allow the deps in CGroups, nor create them in the
domain private namespace, etc.
Fixes: 2249455654
Reported-by: Andrea Bolognani <abologna@redhat.com>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The device mapper major is needed in virIsDevMapperDevice() which
determines whether given device is managed by device-mapper. This
number is obtained by parsing /proc/devices and then stored in a
global variable so that the file doesn't have to be parsed again.
However, as it turns out this logic is flawed - the major number
is not static and can change as it can be specified as a
parameter when loading the dm-mod module.
Unfortunately, I was not able to come up with a good solution and
thus the /proc/devices file is being parsed every time we need
the device mapper major.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
BPF syscall BPF_MAP_GET_NEXT_KEY returns -1 if something fails but it
will also return -1 if trying to get next key using the last key in the
map with errno set to ENOENT.
If there are VMs running and libvirtd is restarted and user tries to
call some cgroup devices operation on a VM we need to get the count of
entries in BPF map and it fails which will result in error when trying
to attach/detech devices.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1833321
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There is a race between vir_event_thread_finalize and
virEventThreadWorker in releasing the last reference on
the GMainContext. If virEventThreadDataFree() runs after
vir_event_thread_finalize releases its reference, then
it will release the last reference on the GMainContext.
As a result g_autoptr cleanup on the GSource will access
free'd memory.
The race can be seen in non-deterministic crashes of the
virt-run-qemu program during its shutdown, but could
also likely affect the main libvirtd QEMU driver:
Thread 2 (Thread 0x7f508ffff700 (LWP 222813)):
#0 0x00007f509c8e26b0 in malloc_consolidate (av=av@entry=0x7f5088000020) at malloc.c:4488
#1 0x00007f509c8e4b08 in _int_malloc (av=av@entry=0x7f5088000020, bytes=bytes@entry=2048) at malloc.c:3711
#2 0x00007f509c8e6412 in __GI___libc_malloc (bytes=2048) at malloc.c:3073
#3 0x00007f509d6e925e in g_realloc (mem=0x0, n_bytes=2048) at gmem.c:164
#4 0x00007f509d705a57 in g_string_maybe_expand (string=string@entry=0x7f5088001f20, len=len@entry=1024) at gstring.c:102
#5 0x00007f509d705ab6 in g_string_sized_new (dfl_size=dfl_size@entry=1024) at gstring.c:127
#6 0x00007f509d708c5e in g_test_log_dump (len=<synthetic pointer>, msg=<synthetic pointer>) at gtestutils.c:3330
#7 0x00007f509d708c5e in g_test_log
(lbit=G_TEST_LOG_ERROR, string1=0x7f508800fcb0 "GLib:ERROR:ghash.c:377:g_hash_table_lookup_node: assertion failed: (hash_table->ref_count > 0)", string2=<optimized out>, n_args=0, largs=0x0) at gtestutils.c:975
#8 0x00007f509d70af2a in g_assertion_message
(domain=<optimized out>, file=0x7f509d7324a2 "ghash.c", line=<optimized out>, func=0x7f509d732750 <__func__.11348> "g_hash_table_lookup_node", message=<optimized out>)
at gtestutils.c:2504
#9 0x00007f509d70af8e in g_assertion_message_expr
(domain=domain@entry=0x7f509d72d76e "GLib", file=file@entry=0x7f509d7324a2 "ghash.c", line=line@entry=377, func=func@entry=0x7f509d732750 <__func__.11348> "g_hash_table_lookup_node", expr=expr@entry=0x7f509d732488 "hash_table->ref_count > 0") at gtestutils.c:2555
#10 0x00007f509d6d197e in g_hash_table_lookup_node (hash_table=0x55b70ace1760, key=<optimized out>, hash_return=<synthetic pointer>) at ghash.c:377
#11 0x00007f509d6d197e in g_hash_table_lookup_node (hash_return=<synthetic pointer>, key=<optimized out>, hash_table=0x55b70ace1760) at ghash.c:361
#12 0x00007f509d6d197e in g_hash_table_remove_internal (hash_table=0x55b70ace1760, key=<optimized out>, notify=1) at ghash.c:1371
#13 0x00007f509d6e0664 in g_source_unref_internal (source=0x7f5088000b60, context=0x55b70ad87e00, have_lock=0) at gmain.c:2103
#14 0x00007f509d6e1f64 in g_source_unref (source=<optimized out>) at gmain.c:2176
#15 0x00007f50a08ff84c in glib_autoptr_cleanup_GSource (_ptr=<synthetic pointer>) at /usr/include/glib-2.0/glib/glib-autocleanups.h:58
#16 0x00007f50a08ff84c in virEventThreadWorker (opaque=0x55b70ad87f80) at ../../src/util/vireventthread.c:114
#17 0x00007f509d70bd4a in g_thread_proxy (data=0x55b70acf3850) at gthread.c:784
#18 0x00007f509d04714a in start_thread (arg=<optimized out>) at pthread_create.c:479
#19 0x00007f509c95cf23 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Thread 1 (Thread 0x7f50a1380c00 (LWP 222802)):
#0 0x00007f509c8977ff in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007f509c881c35 in __GI_abort () at abort.c:79
#2 0x00007f509d72a823 in g_mutex_clear (mutex=0x55b70ad87e00) at gthread-posix.c:1307
#3 0x00007f509d72a823 in g_mutex_clear (mutex=mutex@entry=0x55b70ad87e00) at gthread-posix.c:1302
#4 0x00007f509d6e1a84 in g_main_context_unref (context=0x55b70ad87e00) at gmain.c:582
#5 0x00007f509d6e1a84 in g_main_context_unref (context=0x55b70ad87e00) at gmain.c:541
#6 0x00007f50a08ffabb in vir_event_thread_finalize (object=0x55b70ad83180 [virEventThread]) at ../../src/util/vireventthread.c:50
#7 0x00007f509d9c48a9 in g_object_unref (_object=<optimized out>) at gobject.c:3340
#8 0x00007f509d9c48a9 in g_object_unref (_object=0x55b70ad83180) at gobject.c:3232
#9 0x00007f509583d311 in qemuProcessQMPFree (proc=proc@entry=0x55b70ad87b90) at ../../src/qemu/qemu_process.c:8355
#10 0x00007f5095790f58 in virQEMUCapsInitQMPSingle
(qemuCaps=qemuCaps@entry=0x55b70ad88010, libDir=libDir@entry=0x55b70ad049e0 "/tmp/virt-qemu-run-VZC9N0/lib/qemu", runUid=runUid@entry=107, runGid=runGid@entry=107, onlyTCG=onlyTCG@entry=false) at ../../src/qemu/qemu_capabilities.c:5409
#11 0x00007f509579108f in virQEMUCapsInitQMP (runGid=107, runUid=107, libDir=0x55b70ad049e0 "/tmp/virt-qemu-run-VZC9N0/lib/qemu", qemuCaps=0x55b70ad88010)
at ../../src/qemu/qemu_capabilities.c:5420
#12 0x00007f509579108f in virQEMUCapsNewForBinaryInternal
(hostArch=VIR_ARCH_X86_64, binary=binary@entry=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", libDir=0x55b70ad049e0 "/tmp/virt-qemu-run-VZC9N0/lib/qemu", runUid=107, runGid=107, hostCPUSignature=0x55b70ad01320 "GenuineIntel, Intel(R) Xeon(R) Silver 4210 CPU @ 2.20GHz, family: 6, model: 85, stepping: 7", microcodeVersion=83898113, kernelVersion=0x55b70ad00d60 "4.18.0-211.el8.x86_64 #1 SMP Thu Jun 4 08:08:16 UTC 2020") at ../../src/qemu/qemu_capabilities.c:5472
#13 0x00007f5095791373 in virQEMUCapsNewData (binary=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", privData=0x55b70ad5b8f0) at ../../src/qemu/qemu_capabilities.c:5505
#14 0x00007f50a09a32b1 in virFileCacheNewData (name=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", cache=<optimized out>) at ../../src/util/virfilecache.c:208
#15 0x00007f50a09a32b1 in virFileCacheValidate (cache=cache@entry=0x55b70ad5c030, name=name@entry=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", data=data@entry=0x7ffca39ffd90)
at ../../src/util/virfilecache.c:277
#16 0x00007f50a09a37ea in virFileCacheLookup (cache=cache@entry=0x55b70ad5c030, name=name@entry=0x55b70ad7dc40 "/usr/libexec/qemu-kvm") at ../../src/util/virfilecache.c:310
#17 0x00007f5095791627 in virQEMUCapsCacheLookup (cache=0x55b70ad5c030, binary=0x55b70ad7dc40 "/usr/libexec/qemu-kvm") at ../../src/qemu/qemu_capabilities.c:5647
#18 0x00007f50957c34c3 in qemuDomainPostParseDataAlloc (def=<optimized out>, parseFlags=<optimized out>, opaque=<optimized out>, parseOpaque=0x7ffca39ffe18)
at ../../src/qemu/qemu_domain.c:5470
#19 0x00007f50a0a34051 in virDomainDefPostParse
(def=def@entry=0x55b70ad7d200, parseFlags=parseFlags@entry=258, xmlopt=xmlopt@entry=0x55b70ad5d010, parseOpaque=parseOpaque@entry=0x0)
at ../../src/conf/domain_conf.c:5970
#20 0x00007f50a0a464bb in virDomainDefParseNode
(xml=xml@entry=0x55b70aced140, root=root@entry=0x55b70ad5f020, xmlopt=xmlopt@entry=0x55b70ad5d010, parseOpaque=parseOpaque@entry=0x0, flags=flags@entry=258)
at ../../src/conf/domain_conf.c:22520
#21 0x00007f50a0a4669b in virDomainDefParse
(xmlStr=xmlStr@entry=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., filename=filename@entry=0x0, xmlopt=0x55b70ad5d010, parseOpaque=parseOpaque@entry=0x0, flags=flags@entry=258) at ../../src/conf/domain_conf.c:22474
#22 0x00007f50a0a467ae in virDomainDefParseString
(xmlStr=xmlStr@entry=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., xmlopt=<optimized out>, parseOpaque=parseOpaque@entry=0x0, flags=flags@entry=258)
at ../../src/conf/domain_conf.c:22488
#23 0x00007f50958ce112 in qemuDomainCreateXML
(conn=0x55b70acf9090, xml=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., flags=0) at ../../src/qemu/qemu_driver.c:1744
#24 0x00007f50a0c268ac in virDomainCreateXML
(conn=0x55b70acf9090, xmlDesc=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., flags=0) at ../../src/libvirt-domain.c:176
#25 0x000055b709547e7b in main (argc=<optimized out>, argv=<optimized out>) at ../../src/qemu/qemu_shim.c:289
The solution is to explicitly unref the GSource at a safe time instead
of letting g_autoptr unref it when leaving scope.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a fairly long standing race condition bug in glib which can hit
if you call g_source_destroy or g_source_unref from a non-main thread:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1358
Unfortunately it is really common for libvirt to call g_source_destroy
from a non-main thread. This glib bug is the cause of non-determinstic
crashes in eventtest, and probably in libvirtd too.
To work around the problem we need to ensure that we never release
the last reference on a GSource from a non-main thread. The previous
patch replaced our use of g_source_destroy with a pair of
g_source_remove and g_source_unref. We can now delay the g_source_unref
call by using a idle callback to invoke it from the main thread which
avoids the race condition.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The source ID number is an alternative way to identify a source that has
been added to a GMainContext. Internally when a source ID is given, glib
will lookup the corresponding GSource and use that. The use of a source
ID is racy in some cases though, because it is invalid to continue to
use an ID number after the GSource has been removed. It is thus safer
to use the GSource object directly and have full control over the ref
counting and thus cleanup.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When COW is not explicitly requested to be disabled or enabled, the
function is supposed to do nothing on non-BTRFS file systems.
Fixes commit 7230bc95aa.
https://bugzilla.redhat.com/show_bug.cgi?id=1866157
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Many of our calls to xmlNodeGetContent() (which are now all via
virXMLNodeContentString() are failing to check for a NULL return. We
need to remedy that, but in order to make the remedy simpler, let's
log an error in virXMLNodeContentString(), so that the callers don't
all individually need to (since it would be the same error message for
all of them anyway).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If there's a list of mdevs to be assigned to a domain, but one of them
(NOT the first) is already assigned to a different domain we're going
to crash in the qemuProcessStop phase in
virMediatedDeviceListFindIndex, because some of the pointers in
mgr->activeMediatedHostdevs are dangling. This is due to
virMediatedDeviceListMarkDevices using cleanup instead of rollback when
we find out that a device is already taken.
Reproducer steps:
1. start vm1 with mdev1
2. start vm2 with mdev2, mdev1 (the order is important!)
Backtrace:
#0 0x0000ffffb8c36250 in strcmp
#1 0x0000ffffb9b80754 in virMediatedDeviceListFindIndex
#2 0x0000ffffb9b80870 in virMediatedDeviceListFind
#3 0x0000ffffb9c9e168 in virHostdevReAttachMediatedDevices
#4 0x0000ffff9949f724 in qemuHostdevReAttachMediatedDevices
#5 0x0000ffff9949f7f8 in qemuHostdevReAttachDomainDevices
#6 0x0000ffff994bcd70 in qemuProcessStop
#7 0x0000ffff994bf4e0 in qemuProcessStart
Signed-off-by: Binfeng Wu <wubinfeng@huawei.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These variables are only used for assignment and have
no other effect.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In virCgroupV2BindMount there is an unused variable containing
what seem to be tmpfs mount options.
Delete it. Unlike with cgroups v1, we do not create a tmpfs
here.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that everything uses g_strfreev, this function is no longer
needed.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The g_strdupv function from GLib provides
the same functionality.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Last usage out of virlog.c was removed by
commit 91268c715c
node_device_udev: remove deprecated logging function
Also drop the virbuffer.h include - it seems it was never used
for anything else than the transitive stdarg.h include.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This function calls virLogVMessage. Move it below the definition
of virLogVMessage so it can call it even without a prototype.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The XML function is needed in the C file,
not in the header.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It was needed for virAsprintf, which is now dropped.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 33ed622106
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We use an array of size VIR_NODE_MEMORY_STATS_FIELD_LENGTH
to store the string read from sysfs, but pass unbound "%s"
to sscanf.
Make the array larger by one and simply stringify that
constant as the field width specifier.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There is no distinction between Read/Write locks for resctrl from libvirt's
point of view any more.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was created to get rid of conditional compilation in the resctrl code and
make it usable anywhere else. However this is not something that is going to be
used in other places because it is not portable and resctrl is just very
specific in this regard. And there is no reason why there could not be a
preprocessor conditional in the resctrl code. Also the interface of
virFileFlock() was very ambiguous which lead to some issues.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
That's the way it should've been all the time. It was originally the case, but
then the rework to virFileFlock() made the function ambiguous when it was
created in commit 5a0a5f7fb5, and due to that it was misused in commit
657ddeff23 and since then the lock being taken was shared rather than
exclusive.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Meson doesn't use .libs directory, everything is placed directly into
directories where meson.build file is used.
In order to have working tests and running libvirt directly from GIT we
need to fix all the paths pointing '.libs' directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With meson we no longer have .libs directory with the actual binary so
we have to take a different approach to detect if running from build
directory.
This is not as robust as for autotools because if you select --prefix
in the build directory it will incorrectly enable the override as well
but nobody should do that.
We have to modify some of the tests to not add current build path into
PATH variable and use the full path for virsh instead. Otherwise it
would be impossible to figure out that we are running virsh from build
directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
There is no point of having this option in libvirt because the debug
logs can be configured using log filters.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
After the switch to libnl these are no longer used.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 77e7c13b2e
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
CVE-2020-14339
When building domain's private /dev in a namespace, libdevmapper
is consulted for getting full dependency tree of domain's disks.
The reason is that for a multipath devices all dependent devices
must be created in the namespace and allowed in CGroups.
However, this approach is very fragile as building of namespace
happens in the forked off child process, after mass close of FDs
and just before dropping privileges and execing QEMU. And it so
happens that when calling libdevmapper APIs, one of them opens
/dev/mapper/control and saves the FD into a global variable. The
FD is kept open until the lib is unlinked or dm_lib_release() is
called explicitly. We are doing neither.
However, the virDevMapperGetTargets() function is called also
from libvirtd (when setting up CGroups) and thus has to be thread
safe. Unfortunately, libdevmapper APIs are not thread safe (nor
async signal safe) and thus we can't use them. Reimplement what
libdevmapper would do using plain C (ioctl()-s, /proc/devices
parsing, /dev/mapper dirwalking, and so on).
Fixes: a30078cb83
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1858260
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since we have VIR_AUTOSTRINGLIST we can use it to free string
lists used in the function automatically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are two distinct WITH_DEVMAPPER sections in the file, for
different functions each. Rearrange the code to make some of
future commits smaller.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
btrfs defaults to performing copy-on-write for files. This is often
undesirable for VM images, so we need to be able to control whether this
behaviour is used.
The virFileSetCOW() will allow for this. We use a tristate, since out of
the box, we want the default behaviour attempt to disable cow, but only
on btrfs, silently do nothing on non-btrfs. If someone explicitly asks
to disable/enable cow, then we want to raise a hard error on non-btrfs.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
gcc 10.1.0 on Debian sid has a bug where the bounds checking gets
confused beteen two branches:
In file included from /usr/include/string.h:495,
from ../../src/internal.h:28,
from ../../src/util/virsocket.h:21,
from ../../src/util/virsocketaddr.h:21,
from ../../src/util/virnetdevip.h:21,
from ../../src/util/virnetdevip.c:21:
In function 'memcpy',
inlined from 'virNetDevGetifaddrsAddress' at ../../src/util/virnetdevip.c:914:13,
inlined from 'virNetDevIPAddrGet' at ../../src/util/virnetdevip.c:962:16:
/usr/include/arm-linux-gnueabihf/bits/string_fortified.h:34:10: error: '__builtin_memcpy' offset [16, 27] from the object at 'addr' is out of the bounds of referenced subobject 'inet4' with type 'struct sockaddr_in' at offset 0 [-Werror=array-bounds]
34 | return __builtin___memcpy_chk (__dest, __src, __len, __bos0 (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../../src/util/virnetdevip.h:21,
from ../../src/util/virnetdevip.c:21:
../../src/util/virnetdevip.c: In function 'virNetDevIPAddrGet':
../../src/util/virsocketaddr.h:29:28: note: subobject 'inet4' declared here
29 | struct sockaddr_in inet4;
| ^~~~~
cc1: all warnings being treated as errors
Note the source location is pointing to the "inet6" / AF_INET6 branch of
the "if", but is complaining about bounds of the "inet4" field. Changing
the code into a switch() is sufficient to avoid triggering the bug and
is arguably better code too.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_new() is used in only 3 places. Switching them to g_new0() will do
no harm, reduces confusion, and helps me sleep better at night knowing
that all allocated memory is initialized to 0 :-) (Yes, I *know* that
in all three cases the associated memory is immediately assigned some
other value. Today.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've used security_context_t for variables passed
to libselinux APIs. But almost 7 years ago, libselinux developers
admitted in their API that in fact, it's just a 'char *' type
[1]. Ever since then the APIs accept 'char *' instead, but they
kept the old alias just for API stability. Well, not anymore [2].
1: 9eb9c93275
2: 7a124ca275
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit <f650e86703847af544762d02f79c70131ff7fbab> added check for
openpty function from util library using AC_CHECK_LIB(). However, that
macro doesn't define OPENPTY_LIBS, it only defines WITH_LIBUTIL and
prepends -lutil into LIBS for the whole project.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It was introduced by commit <c606671aaad10a9bc87f226bc473a091e00a9629>
as a gnulib ldexp module and later removed by commit
<09fe607b4de8eb883c966e90aaf5563299a22738>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fixes inconsistency with macro names for external programs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was introduced together with clock-time gnulib module by commit
<d74e5a4dfc434d3a1d01856d013a7f50d910fa95> and removed from libvirt
by commit <86d223a762990c9d529065a2d3b30b6a00ea63dd>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virFileIsAccessible does not return true on accessible
directories. Check whether it set EISDIR and only
then assume the directory is inaccessible.
Return 0 (not found) instead of 1 (found),
since the bridge driver taints the network based on
this return value, not whether the hook actually ran.
Remove the bogus check from virHookCall, since it already
checks the virHooksFound bitmap that was filled before
by virHookCheck.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 7fa7f7eeb6
Closes: https://gitlab.com/libvirt/libvirt/-/issues/47
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When preparing for the removal of GNULIB commit 18dca21a32 removed the
unneeded O_DIRECTORY, but unfortunately started opening the directory for
writing which fails every time for a directory. There is also no need for that
as flock() works on O_RDONLY file descriptor as well, even for LOCK_EX.
https://bugzilla.redhat.com/1852741
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are several calls to virBufferFreeAndReset() when functions
encounter an error, but the caller never uses the virBuffer once an
error has been encountered (all callers detect error by looking at the
function return value, not the contents of the virBuffer being
operated on), and now that all virBuffers are auto-freed there is no
reason for the lower level functions like these to spend time freeing
a buffer that is guaranteed to be freed momentarily anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The idea is to have a function that calls virHostCPUGetOnlineBitmap()
but, instead of returning NULL if the host does not have CPU
offlining capabilities, fall back to a bitmap containing all
present CPUs.
Next patch will use this helper in two other places.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function reads the string in sysfspath/cpu/present and
parses it manually to retrieve the number of present CPUs.
virHostCPUGetPresentBitmap() reads and parses the same file,
using a more robust parser via virBitmapParseUnlimited(),
but returns a bitmap. Let's drop all the manual parsing done
here and simply return the size of the resulting bitmap
from virHostCPUGetPresentBitmap().
Given that no more parsing is being done manually in the function,
rename it to virHostCPUCountLinux().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is nothing domain specific about the function, thus it
should not have virDomain prefix. Also, the fact that it is a
static function makes it impossible to use from other files.
Move the function to virxml.c and drop the 'Domain' infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The strings allocated in virGetHostnameImpl() are all allocated via
g_strdup(), which will exit on OOM anyway, so the call to
virReportOOMError() is redundant, and removing it allows slight
modification to the code, in particular the cleanup label can be
eliminated.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
AUTOPTR_CLEANUP_FUNC is set to xmlBufferFree() in util/virxml.h (This
is actually new - added accidentally (but fortunately harmlessly!) in
commit 257aba2daf. I had added it along with the hunks in this patch,
then decided to remove it and submit separately, but missed taking out
the hunk in virxml.h)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since feb83c1e71 libvirtd will abort on
startup if run as non-root
2020-07-01 16:30:30.738+0000: 1647444: error : virDirOpenInternal:2869 : cannot open directory '/etc/libvirt/hooks/daemon.d': Permission denied
The root cause flaw is that non-root libvirtd is using /etc/libvirt for
its hooks. Traditionally that has been harmless though since we checked
whether we could access the hook file and degraded gracefully. We need
the same access check for iterating over the hook directory.
Long term we should make it possible to have an unprivileged hook dir
under $HOME.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ZPCI device validation is specific to qemu. So, let us move the
ZPCI uid validation out of domain xml parsing into qemu domain device
validation.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let us fix the issues with zPCI address validation and auto-generation
on s390.
Currently, there are two issues with handling the ZPCI address
extension. Firstly, when the uid is to be auto-generated with a
specified fid, .i.e.:
...
<address type='pci'>
<zpci fid='0x0000001f'/>
</address>
...
we expect uid='0x0001' (or the next available uid for the domain).
However, we get a parsing error:
$ virsh define zpci.xml
error: XML error: Invalid PCI address uid='0x0000', must be > 0x0000
and <= 0xffff
Secondly, when the uid is specified explicitly with the invalid
numerical value '0x0000', we actually expect the parsing error above.
However, the domain is being defined and the uid value is silently
changed to a valid value.
The first issue is a bug and the second one is undesired behaviour, and
both issues are related to how we (in-band) signal invalid values for
uid and fid. So let's fix the XML parsing to do validation based on what
is actually specified in the XML.
The first issue is also related to the current code behaviour, which
is, if either uid or fid is specified by the user, it is incorrectly
assumed that both uid and fid are specified. This bug is fixed by
identifying when the user specified ZPCI address is incomplete and
auto-generating the missing ZPCI address.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Refer to the notion of mount propagation instead which describes
the actual behaviour more clearly.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The two sides of a PTY can be referred to as primary and secondary
TTYs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This new naming matches the terminology used in the error
messages that the callers report.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
