The original idea was to ensure that the destination has the same
original state of the '-no-reboot' flag to ensure identical behaviour of
the 'vidDomainModifyLifecycleAction' API.
With newer qemu's we'll be able to modify the behaviour using the
monitor so old daemons won't be able to keep up anyways.
Remove this feature as it's not very useful and will be replaced by a
proper solution.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Save further readers the headache of determining what it actually does
and note that it's not used with qemu version supporting the
'set-action' command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If current qemu supports 'set-action' use it instead of the single-use
command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'set-action' QMP command allows modifying the behaviour when the
guest resets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We simply terminate qemu instead of issuing a reset as the semantics of
the setting dictate.
Fix it by handling it identically to 'fake reboot'.
We need to forbid the combination of 'onReboot' -> 'destroy' and
'onPoweroff' -> reboot though as the handling would be hairy and it
honetly makes no sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'preserve' action.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some actions are not supported by qemu. Use the recently added
'qemuValidateLifecycleAction' helper to ensure that the API does the
same validation as we do on startup in the validation callbacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'rename-restart' action.
At this point the following handling would take place:
'on_reboot' set to 'rename-restart' is ignored on guest-initiated
reboots, the guest simply reboots.
For on_poweroff set to 'rename-restart' the following happens:
guest initiated shutdown -> 'destroy'
libvirt initiated shutdown -> 'reboot'
In addition when 'on_reboot' is 'destroy' in addition to 'on_poweroff'
being 'rename-restart' the guest is able to execute instructions after
issuing a reset before libvirt terminates it. This will be addressed
separately later.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We've got multiple random open-coded versions. Switch to the helper
function which doesn't report errors as they'd be mostly wrong as the
operation was indeed successful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The public API wrapper range-checks the arguments. Save the next reader
the hassle of looking it up.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need to validate the XML against schema if option '--validate'
was passed to the virsh command. This patch also includes
propagation of flags into the virStoragePoolDefParse() function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They require the caller to provide the maximum number
of array elements upfront, leading to either incomplete
results or violations of the zero-one-infinity rule.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Q35 machine types 2.3 and older had an integrated floppy controller.
Support for these machine types was removed by QEMU commit
commit 86165b499edf8b03bb2d0e926d116c2f12a95bfe
q35: Remove old machine versions
git describe: v2.5.0-1530-g86165b499e contains: v2.6.0-rc0~76^2~4
In libvirt, we have bumped the minimum QEMU version to 2.11:
commit b4cbdbe90b
qemu: Formally deprecate support for qemu < 2.11
git describe: v7.3.0-13-gb4cbdbe90b contains: v7.4.0-rc1~300
Since this QEMU version only supports Q35 machine versions 2.4+,
remove the code dealing with older ones.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Simon Rowe <simon.rowe@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch also includes propagation of flags into the
virNetworkDefParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I have added new driver functions which define network with given
flags. I have also replaced definitions of the functions without
flags with function calls to the new ones.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I need to propagate flags for the next commit.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new API allows to define network with given flags.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Where easily possible, declare variables with g_auto to reduce
the amount of calls in cleanup sections.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
New clang has a false-positive about value of 'olddisks' being unused
after being set. This is clearly wrong because we want to use
'g_autofree' to clear it later.
While I'm against modifying good code for the sake of bad static
analysis in this case it's not obvious that we depend on the lifetime of
'olddisks' being needed until the end of the function as we store
pointers into it into the hash table and later copy them out.
Rewrite the code by assigning to 'olddisks' earlier and then using
'olddisks' in the loop, so it's clear where the lifetime of the objects
ends, and this should also silence the warning.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virNetworkDef was not freed if the function failed in the first
two ifs, causing a possible memory leak.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When using 'virsh freepages' or 'virsh allocpages' then
virHostMemGetFreePages() or virHostMemAllocPages() is called,
respectively. But the following may happen: libvirt was built
without numactl support and thus a fake NUMA node was constructed
for capabilities, which means that startCell is going to be 0.
But we can't blindly pass startCell = 0 to virNumaGetPageInfo()
nor virNumaSetPagePoolSize() because they would operate over node
specific path (/sys/devices/system/node/nodeX) rather than NUMA
agnostic path (/sys/kernel/mm/hugepages/) and we are not
guaranteed that the former exists (kernel might have been built
without NUMA support).
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=1978574
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In all three cases (LXC, QEMU and VBox drivers) the caller has
access to host capabilities and thus know the maximum NUMA node.
This means, that virHostMemAllocPages() doesn't have to query
it. Querying may fail if libvirt was compiled without numactl
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In all three cases (LXC, QEMU and VBox drivers) the caller has
access to host capabilities and thus know the maximum NUMA node.
This means, that virHostMemGetFreePages() doesn't have to query
it. Querying may fail if libvirt was compiled without numactl
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is just a small helper that will be used later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
A logic bug in the code creating overlays on existing images resulted
into wrongly using "luks" instead of "qcow2" for the backing format if
the backing image is an luks-encrypted qcow2. The special format munging
is needed only for raw luks images.
In practice the impact is not as critical as to use encrypted images in
the backing chain the user must fully describe the backing chain
including backing images to provide encryption keys, which overrides the
metadata recorded in the qcow2 header.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to validate the XML against schema if option '--validate'
was passed to the virsh command. This patch also includes
propagation of flags into the virSecretDefParse() function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We need to validate the XML against schema if option 'validate'
was passed to the 'iface-define' virsh command. For that we need
to allow validation flag and propagate flags to parse function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We need to know if validation flag is present in order to
validate given XML against schema in virXMLParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch also includes propagation of flags into the
virNWFilterDefParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I have added a new driver function which allows to define
nwfilter with given flags. I have also replaced definition of
nwfilterDefineXML() with function call to the new function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new API function allows to define nwfilter with given flags.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When setting O_CLOEXEC flag on received FD fails the FD is closed
using VIR_FORCE_CLOSE(). But the call is wrapped in errno save
which is not necessary because VIR_FORCE_CLOSE() preserves errno
value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use %s to print NULLSTR(duri).
Reported-by: Peng Liang <liangpeng10@huawei.com>
Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Warn these error instead of return when removing qos or queues. This will
avoid residual qos clearance on multiple interfaces.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Separate virNetDevOpenvswitchInterfaceClearQos into two steps. When setting
qos, we can set only rx or tx and the other one should be cleared.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add vmuuid notes on virNetDevOpenvswitchInterfaceSetQos,
and change vmid to vmuuid.
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All supported QEMU versions have this option so there's no need for us
to base it on the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All QEMU versions we support have these and it's very unlikely that they
will be removed. Remove the capability checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'set-numa-node' is the command which can set the equivalent parameters
to '-numa' in preconfig mode, so we can use it as witness to see that
-numa is supported.
To ensure that the old detection method is removed once we'll be bumping
qemu support add a comment with the appropriate version check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions have all the fields so we can remove the
booleans controlling which fields are used on the monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuMonitorJSONCheckError instead of handcrafted error reporting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to automatic memory freeing and remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They are no longer used as we now assume that all tuning caps are
present and in case some will be removed we'll need to use different
probing methods.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All currently supported qemu versions support all throttling
capabilities. It is unlikely that any of the fields will be removed in
the future and if it will we will need to do specific probing which is
possible via the 'throttle' object which is the replacement for the
legacy way to configure throttling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The configurability of the number of dies in a CPU can be inferred from
the presence of the 'die-id' field in 'query-hotpluggable-cpus'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Probing QEMU_CAPS_DRIVE_DISCARD and QEMU_CAPS_DRIVE_DETECT_ZEROES can be
replaced by looking into the QMP schema rather than looking at -drive
which isn't in use any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it more obvious that we care about passing FDs on the commandline
before startup of qemu, which is used to avoid startup monitor polling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_CHARDEV_RECONNECT, QEMU_CAPS_CHARDEV_LOGFILE and
QEMU_CAPS_CHARDEV_FILE_APPEND can be probed from the appropriate fields
in 'chardev-add' probed via the QMP schema instead of the command line
parameters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a comment that will attempt to discourage adding new capabilities
based on 'query-command-line-options'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a cross reference of the enum value name with the string
representation. This allows a quick cross-reference of the values
without having to open the header and implementation files separately.
To achieve this the checker code at first obtains a list of the
flags and cross-references them when checking the grouping in
syntax-check, thus we are guaranteed to stay in sync.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Further commits will be refactoring and minimizing capabilities being
parsed from 'query-command-line-options'. Group the struct driving the
detection by argument name so it's easier to spot options belonging
together.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add g_autofree to functions changed in previous commits doing
g_auto cleanup for libxml2-related variables, where it could
lead to removal of a label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use g_auto where possible, reducing variable scope where applicable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move 'ctxt' and 'doc' inside the loop and mark them with g_auto.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Based on kernel commit messages the interface is
/sys/class/fc/fc_udev_device/appid_store
where we need to write the following string "$INODE:$APPID".
$INODE is the VM root cgroup inode in hexadecimal and $APPID is user
provided string that will be attached to each FC frame for the VM
within the cgroup identified by inode and has limit 128 bytes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Prepare the function for additional sub-elements where all of the
sub-elements are optional.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There is no need to error out for empty <partition></partition> element
as we can just simply ignore it. This allows to simplify the function
and prepare it for new sub-elements of <resource>.
It makes the <partition> element optional so we need to reflect the
change in schema as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
For new feature Fibre Channel VMID we will need to get inode of the
VM root cgroup as it is used in the new kernel API together with VMID.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
commit 2e668a61d5ae4("Fix error handling when adding MCS labels") uses
the 'pctx' in virReportError after it has been freed. Fix it.
Fixes: 2e668a61d5
Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Libvirt assumes that a SCSI bus can fit up to 8 devices
(including controller itself), except for so called wide bus
which can accommodate up to 16 devices (again, including
controller). This plays important role when computing 'drive'
address in virDomainDiskDefAssignAddress(). So far, the only
driver that enables wide SCSI bus is VMX. But with newer
releases, ESX is capable of "super wide" bus (64 devices).
We can blindly bump the limit in our code because then we would
compute address that's invalid for older ESX versions that we
still want to support.
Unfortunately, I haven't found a better place where to store this
than virDomainDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous patch it can no longer happen that @def will be
NULL and *def won't be.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way we parse VMX configuration is rather unfortunate,
especially when it comes to disks. We allocate an array that can
handle all possible disks but leave the array counter (ndisks) at
zero and increase it only after successful parsing. But, we never
size the array down to release unneeded chunks of memory.
We can do better: we can use VIR_APPEND_ELEMENT() to allocate
array as needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
At the beginning of vmx.c we have a comment that maps
virtualHW.version field onto ESX version. However, it wasn't
updated in a while. Fill it in using the following kbase article:
https://kb.vmware.com/s/article/1003746
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the QEMU driver is configured to use the old "file" stdio
handler (meaning virtlogd is out of the picture) and a chardev
has a log file configured we rely on QEMU being able to create
the file itself. This may not be always possible (e.g. if the
logfile is set to a directory that QEMU process can't reach).
In such case we should create the file and just pass its FD to
QEMU.
We could do that unconditionally and just either pass FD from
virtlogd or the one we opened, because we bumped QEMU version
and are now requiring new enough QEMU. However, I'm keeping the
old style where logfile is appended on the cmd line for the tests
sake.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1989457
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Again, we don't need full driver, just its config.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
The function doesn't really need domain object, but domain
definition from which it takes seclabels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
The function doesn't write to domain definition really so make
@def argument as const. This allows us to call it from functions
where the domain definition is already const.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
LIBXL_HAVE_LIBXL_DEVICE_DISK_DISCARD_ENABLE exists since Xen 4.5.0
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
virXMLParse() now allows validating xml against schema directly,
eliminating the need to do it individually in each function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
xmlDocPtr is no longer needed, because validation against schema
was moved to another function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
virXMLParse() now allows to validate xml against schema directly,
eliminating the need to do it individually.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We need this in order to validate XML against schema at one
place, rather than have the same code for validation in different
functions.
I will add '--validate' option to more virsh commands soon and
this makes it easier as virXMLParse() is called in every one I
plan to change.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We didn't always save status xml after generating new taint message
which resulted in it being deleted in case of a libvirtd restart.
Some taint messages were preserved thanks to saving status xml
separately at the end of the calling functions. With this, every taint
message is saved, regardless of the calling functions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1965589
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the preferred way to do it, but there were a few
instances in which some of the path components had embedded
slashes instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Turn 'mounts' into a proper GStrv after sorting so that automatic
cleanup can be used and shuffle around the cleanup steps so that jumps
can be avoided in favor of direct return of error code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'devMountsPath' and 'devMountsSavePath' are NULL terminated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'devMountsPath' can be converted to an auto-cleared stringlist and thus
asking for the number of entries is not necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller is passing a NULL terminated string list as
'devMountsPath' thus we don't need to get the count of elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The value of 'next' is copied into 'item.file' so we can move the update
to the 'next' pointer earlier and move the VIR_APPEND_ELEMENT call to
where we figure out that we need to append the value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously they were stored in two separate arrays. This way it's
obvious when referencing the same one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both virDomainAuthorizedSSHKeysGet and virDomainGetMessages return a
NULL-terminated string-list, so we can use g_auto(GStrv) to clear the
used memory on failures.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the conversion from virPCIVirtualFunctionList which encapsulates
the list of virtual functions to two disjunct arrays.
This greatly simplifies the fetching of the parameters as well as
cleanup in the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virNetDevGetVirtualFunctions' calls 'virPCIGetVirtualFunctions' and
then re-iterates the returned list to fetch the interface names for the
returned virtual functions.
If we move the fetching of the interface name into
virPCIGetVirtualFunctions we can simplify the code and remove a bunch of
impossible error states.
To accomplish this the function is renamed to
'virPCIGetVirtualFunctionsFull' while keeping a wrapper with original
name and if the physical port ID is passed the interface name is fetched
too without the need to re-convert the address into a sysfs link.
For now 'virNetDevGetVirtualFunctions' still converts the returned data
into two lists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a struct for holding the list of VFs returned by
virPCIGetVirtualFunctions so that we can employ automatic memory
clearing and also allow querying more information at once.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since UUID is not guaranteed to be unique by mdevctl, we may have more
than one nodedev with the same UUID. Therefore, we need to disambiguate
when looking up mdevs by specifying the UUID and parent address, which
mdevctl guarantees to be a unique combination.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately, mdevctl supports defining more than one mdev with the
same UUID as long as they have different parent devices. (Only one of
these devices can be active at any given time).
This means that we can't use the UUID alone as a way to uniquely
identify mdev node devices. Append the parent address to ensure
uniqueness. For example:
Before: mdev_88a6b868_46bd_4015_8e5b_26107f82da38
After: mdev_88a6b868_46bd_4015_8e5b_26107f82da38_0000_00_02_0
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1979440
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This can be used similarly to other postparse callbacks in libvirt --
filling in additional information that can be determined by using the
information provided in the XML. In this case, we determine the address
of the parent device and cache it in the mdev caps so that we can use it
for generating a unique name and interacting with mdevctl.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, this is only for mediated devices. When a new mediated
device is created or defined, the xml is expected specify the nodedev
name of an existing device as its parent. We were not previously
validating this and were simply accepting any string here.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
mdevctl can report multiple defined devices with the same UUID
but different parents, including parents that don't actually exist on
the host machine. Libvirt sets the parent to the 'computer' device for
all of the mdevs that have nonexistent parents. Because of this, it's
possible that there are multiple devices with the same UUID and the same
'computer' device as their parent, so the combination of uuid and parent
nodedev name is not guaranteed to be a unique name.
We need to ensure that each nodedev has a unique name. If we can't use
the UUID as a unique nodedev name, and we can't use the combination of
UUID and nodedev parent name, we need to find another solution. By
caching and using the parent name reported by mdevctl in combination
with the UUID, we can achieve a unique name. mdevctl guarantees that its
uuid/parent combination is unique.
This value will be used to set the mdev nodedev name in a following commit.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 51fbbfdce8 attempted to get the proper nodedev name for the
parent of an defined mdev by traversing the filesystem and looking for a
device that had the appropriate sysfs path. This works, but it would be
cleaner to to avoid mucking around in the filesystem and instead just
just examine the list of devices we have in memory.
We already had a function nodeDeviceFindAddressByName() which constructs
an address for parent device in a format that can be used with mdevctl.
So if we refactor this function into a a function that simply formats an
address for an arbitrary virNodeDeviceObj*, then we can use this
function as a predicate for our new virNodeDeviceObjListFind() function
from the previous commit. This will search our list of devices for one
whose address matches the address we get from mdevctl.
One nice benefit of this approach is that our test cases will now
display xml output with the proper parent name for mdevs (assuming that
we've added the appropriate mock parent devices to the test driver).
Previously they just displayed 'computer' for the parent because the
alternative would have required specially constructing a mock filesystem
environment with a sysfs that mapped to the appropriate parent.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is a generic function that you can provide your own predicate
function to search for a particular device. It will be used in an
upcoming commit.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We currently query the host MSRs to determine if TSC scaling is
supported. This works OK when running privileged and can open
the /dev/cpu/0/msr. When unprivileged we fallback to querying
MSRs from /dev/kvm. This is incorrect because /dev/kvm only
reports accurate info for MSRs that are valid to use from inside
a guest. The TSC scaling support MSR is not, thus we always end
up reporting lack of TSC scaling when unprivileged.
The solution to this is easy, because KVM can directly report
whether TSC scaling is available, which matches what QEMU will
do at startup.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/188
Reported-by: Roman Mohr <rmohr@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 05bd8db60b.
It is true that the remote driver client now contains logic for probing
the driver to connect to when using modular daemons. This logic, however,
only runs when the remote driver is NOT running inside a daemon since we
don't want it activated inside libvirtd. Since the same remote driver
build is used in all daemons, we can't rely on it in virtproxyd either.
Thus we need to keep the virtproxyd probing logic
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The function was inconsistently using 'return -1' and 'goto cleanup;'
unify it by removing the cleanup label and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's used only inside the loop filling the extents, move it there and
restructure the code so that 'extent.path' doesn't have to be freed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'list' will always be NULL when reaching 'virObjectListFreeCount' thus
we can remove the call as well as the 'ret' variable which was only ever
equal to 'nclients' at the point when we returned the value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'bootHotplug' can be auto-freed when terminating the function and moving
the declaration of 'vcpuprops' to the loop which uses it along with
automatic freeing allows us to simplify cleanup in certain cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing for 'tmpvars' and move the allocation of
tmpvars earlier so that we are guaranteed that 'obj' will always be
appended to 'inst->filters' and thus don't need cleanup for it.
By moving the reset of 'inst' to the block when virNWFilterDefToInst
fails we can get rid of the rest of the cleanup section and remove the
'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Construct the 'ruleinst->vars' hash table separately in a temporary
variable so that 'ruleinst' can be allocated on success. This allows us
to get rid of the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'cb' is always NULL when 'virObjectEventCallbackListAddID' is called.
Remove the call.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'item' is always NULLed-out by VIR_APPEND_ELEMENT and 'ret' variable is
always 0 when used so both can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'hub' doesn't need to be freed any more because it's always consumed and
NULLed-out by VIR_APPEND element. This also makes the 'ret' variable
obsolete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'video' will only ever be NULL after the 'cleanup' label thus there's no
need to use 'virDomainVideoDefFree'. In fact we can fully remove the
cleanup section and 'ret' variable by returning directly from failure
points.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_APPEND_ELEMENT doesn't report any errors now so we can remove
VIR_APPEND_ELEMENT_QUIET and replace all uses by VIR_APPEND_ELEMENT
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now it was an alias to VIR_APPEND_ELEMENT. Use virAppendElement
directly until VIR_APPEND_ELEMENT is refactored too and we'll be able to
get rid of VIR_APPEND_ELEMENT_QUIET completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT_COPY which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_APPEND_ELEMENT_INPLACE and VIR_APPEND_ELEMENT_COPY_INPLACE already
ignore the return value from 'virInsertElementsN' which allows a trivial
conversion to virAppendElement without the need for 'ignore_value'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new wrapper calls virInsertElementInternal with the appropriate
arguments without any checks which are unnecessary for appension. This
allows to have no return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split out the code doing the movement of the elements and insertion from
the range checks. This will help in adding an error-free version for
appension.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The idea of @add was that the insersion/appension macros would allow
adding more than one element but this feature was never implemented.
'add' is nowadays used as a dummy variable consuming the result of the
VIR_TYPEMATCH compile time check.
Make it obvious that we don't use 'add' by renaming it to
'typematchDummy', marking it as unused and replacing all occurences
where the value was used by literal '1'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Send TERM/KILL to virtiofsd and its child processes too
and do not exit until they are all dead.
https://bugzilla.redhat.com/show_bug.cgi?id=1940276
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Add a version of virPidFileForceCleanupPath that takes
a 'group' bool argument and propagate it all the way
down to virProcessKillPainfullyDelay.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting with QEMU 6.0, this controller is enabled by default
on aarch64.
https://bugzilla.redhat.com/show_bug.cgi?id=1967187
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we try to migrate vm, we check if it contains only devices
that are able to migrate. If a hostdev device is not able to
migrate we raise an error with <hostdev/>, but it can actually be
<interface/>, so we need to check if hostdev device was created
by us from interface and show the right error message.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1942315
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to test the virDomainGetMessages for test driver, we need to
check some taints or deprecations, so introduce testDomainObjCheckTaint
for checking taints.
As we introduced testDomainObjCheckTaint for test driver, the `dominfo`
command in virshtest will now print tainting messages, so add them for
test.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The test driver and qemu driver could share the same code in
virDomainGetMessages(), so extract it to a function.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It was added by commit c2121602 and later removed by 5a4c2374a
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When loop in function virNVMeDeviceListCreateReAttachList() there may be
reused index @i, this patch fix this by using a new @j.
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need to pass the 'trim' requests through the copy-on-read filter so
if a user configures a discard policy on the disk the requests get
through to the appropriate format layer in the blockdev tree.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1986509
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
This function add halt polling time interface in domstats. So that
we can use command 'virsh domstats VM' to get the data if system
support.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add helper function virHostCPUGetHaltPollTime to obtain halt polling
time. If the kernel support halt polling time statistic, and mount
debugfs. This function will take effect on KVM VMs.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use function virFileReadValueUllongQuiet to read unsigned long
long value without error report.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Base it on the presence of the "blockdev-reopen" QMP command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Export 'qemuBlockReopenFormatMon' and use it in a new test case wich
will validate the arguments against the QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This function was added prior 'blockdev-reopen' being stable and qemu
changed the arguments to actually contain an array of block node
definitions to reopen.
In our case we are just changing between read-only and read-write modes
and thus we can keep operating on the nodes one-by-one.
Modify the code to add the wrapper array.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This will simplify testing of the blockdev-reopen code once it's
enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Similar to what was done for qemu_firmware.c in 61d95a1073, don't
report an error for unknown vhost-user features, just log it and
correctly continue on
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Additional cleanup paths add the possibility of not freeing earlier
stuff. Add an AUTOPTR handler for qemuDomainObjPrivate and use it in
qemuDomainObjPrivateAlloc
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The freeing function will be needed to undo failures in allocation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
'obj->classIdMap' is a bitmap with size of '16', thus the first 3 bits
are guaranteed to be available. Use 'virBitmapSetBit' instead of
'virBitmapSetBitExpand' since we don't need any expansion and ignore
errors as they are impossible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Use a temporary auto-freed local variable to hold the hash table so that
the cleanup section can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Allocate the hash tables first so tat the 'data' struct can be directly
initialized removing the need for a memset and two additional
assignments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Declare the function with G_GNUC_WARN_UNUSED_RESULT as we always want to
use the returned value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In one of my previous patches I've tried to postpone dropping
CAP_SETPCAP until the very end because it's needed for
capng_apply(). What I did not realize back then was that we might
not have the capability to begin with. Because of unknown reasons
capng_apply() pollutes logs only for CAPNG_SELECT_BOUNDS and not
for CAPNG_SELECT_CAPS.
Reproducer is really simple: run libvirtd as a regular user.
During its initialization, libvirtd will spawn some binaries
(dnsmasq, qemu-*, etc.) and while doing so it will try to drop
capabilities.
Anyway, let's call capng_apply(CAPNG_SELECT_BOUNDS) only if we
have the CAP_SETPCAP (which is tracked in need_setpcap variable).
Fixes: 438b50dda8
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1924218
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
After all capabilities were set (except for CAP_SETGID,
CAP_SETUID and CAP_SETPCAP) and after UID:GID was changed we drop
the last aforementioned capabilities (we couldn't drop them
before because we needed UID:GID and capabilities change).
Therefore, there's final capng_apply() call. However, it is
wrapped in one layer of parenthesis more than needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt is using the G_GNUC_FALLTHROUGH macro provided by glib since
version 2.60. Since we need to support older glib, we also have some
compatibility code to define it if missing.
We set the GLIB_VERSION_MAX_ALLOWED macro to ensure we get warnings
when we use an API that dates from a glib version newer than our
minimum benchmark. Historically this didn't get enforced for (most)
macros, but GLib 2.69 has addressed that gap.
This causes our usage of G_GNUC_FALLTHROUGH to trigger warnings.
GLib is right to warn, because it does not know that we have added
our own fallback for older versions.
The only way to squelch this warning though, is to fully undefine
the GLib provided G_GNUC_FALLTHROUGH and use our own in its place.
We'll be able to remove all this compat burden when we finally
update the min glib version to be >= 2.60
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If lvcreate found an existing signature when trying to create a
new logical volume (E.g. left after some deleted volume), the
action failed due to inability to answer interactive question to
wiping it (lvcreate assumed 'no' was the answer). With added
option --yes to the command line, the answer to any interactive
question is assumed to be yes. Therefore, lvcreate wipes the
signature and the new volume is created successfully.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1940413
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
