When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
virCommandAddEnvPassAllowSUID
virCommandAddEnvPassBlockSUID
And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The RNG grammar did not allow arbitrary interleaving, which makes
it harder than necessary to create a new pool from handwritten XML.
* docs/schemas/storagepool.rng: Allow interleaving.
* tests/storagepoolxml2xmlin/pool-sheepdog.xml: Test interleave.
* tests/storagepoolxml2xmlin/pool-iscsi-auth.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Implement the bare minimal sysinfo for AArch64 platforms by
reading the CPU models from /proc/cpuinfo.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Introduced by commit 3f029fb531 the RPM build
was broken due to a missing LXC textcase.
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
The vmx file parsing code was reporting errors when parsing floppy.fileName
entries if the filename didn't end in .flp. There is no such restriction in
ESX; even using the GUI to configure floppy filenames you can specify any
arbitrary file with any extension.
Fix by changing the vmx parsing code so that it uses the floppy.fileType
value to determine whether floppy.fileName refers to a block device or a
regular file.
Also remove code that would have generated an error if no floppy.fileName
was specified. This is not an error either.
Updated the floppy tests in vmx2xmltest.c and xml2vmxtest.c.
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in the testsuite.
* tests/cputest.c (cpuTestCompareXML): Use intended type.
* tests/qemucapabilitiestest.c (testQemuCaps): Likewise.
* tests/qemumonitorjsontest.c: Drop const.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up virhash to provide a const-correct interface: all actions
that don't modify the table take a const table. Note that in
one case (virHashSearch), we actually strip const away - we aren't
modifying the contents of the table, so much as associated data
for ensuring that the code uses the table correctly (if this were
C++, it would be a case for the 'mutable' keyword).
* src/util/virhash.h (virHashKeyComparator, virHashEqual): Use
intended type.
(virHashSize, virHashTableSize, virHashLookup, virHashSearch):
Make const-correct.
* src/util/virhash.c (virHashEqualData, virHashEqual)
(virHashLookup, virHashSize, virHashTableSize, virHashSearch)
(virHashComputeKey): Fix fallout.
* src/conf/nwfilter_params.c
(virNWFilterFormatParameterNameSorter): Likewise.
* src/nwfilter/nwfilter_ebiptables_driver.c
(ebiptablesFilterOrderSort): Likewise.
* tests/virhashtest.c (testHashGetItemsCompKey)
(testHashGetItemsCompValue): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The log message regex has been
[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug|info|warning|error :
The precedence of '|' is high though, so this is equivalent to matching
[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug
Or
info
Or
warning
Or
error :
Which is clearly not what it should have done. This caused the code to
skip over things which are not log messages. The solution is to simply
add brackets.
A test case is also added to validate correctness.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This function takes exactly one argument: an address to check.
It returns true, if the address is an IPv4 or IPv6 address in numeric
format, false otherwise (e.g. for "examplehost").
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, we're unit testing some basic functions and some (so called)
simple functions (e.g. "qmp_capabilities", "system_powerdown"). However,
there are more functions which expect simple "{'return': {}}" reply, but
takes more args to construct the command (for instance "set_link"). This
patch aims on such functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Prefer using VFIO (if available) to the legacy KVM device passthrough.
With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
Since 76b644c when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>
This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.
The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.
This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.
Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.
Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
The following XML is the recommended default clock configuration for
qemu:
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
However we weren't testing any of those timer elements.
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current OOM test impl is too inefficient to be used on the
large test suites. It loops running 'main' multiple times, once
for each alloc in the 'main' method. This has complexity
'n * (n + 1) / 2' in terms of total alloc count. It will be
replaced by a more efficient impl whicih runs individual test
cases instead. This will have same complexity but the values
of 'n' will be much smaller, so a net win.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuxml2xmltest.c function testCompareXMLToXMLHelper would
clobber the 'ret' variable causing it to mis-diagnose OOM
errors.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemumonitorjsontest.c: In function 'testQemuMonitorJSONqemuMonitorJSONGetBalloonInfo':
qemumonitorjsontest.c:1134: warning: integer constant is too large for 'long' type
* tests/qemumonitorjsontest.c
(testQemuMonitorJSONqemuMonitorJSONGetBalloonInfo)
(testQemuMonitorJSONqemuMonitorJSONGetBlockStatsInfo): Use correct
type.
Signed-off-by: Eric Blake <eblake@redhat.com>
I tried to test ./configure --without-lxc --without-remote.
First, the build failed with some odd errors, such as an
inability to build xen, or link failures for virNetTLSInit.
But when you think about it, once there is no remote code,
all of libvirtd is useless, any stateful driver that depends
on libvirtd is also not worth compiling, and any libraries
used only by RPC code are not needed. So I patched
configure.ac to make for some saner defaults when an
explicit disable is attempted. Similarly, since we have
migrated virnetdevbridge into generic code, the workaround
for Linux kernel stupidity must not depend on stateful
drivers being in use.
Then there's 'make check' that needs segregation.
Wow - quite a bit of cleanup to make --without-remote useful :)
* configure.ac: Let --without-remote toggle defaults on stateful
drivers and other libraries. Pick up Linux kernel workarounds
even when qemu and lxc are not being compiled.
* tests/Makefile.am (test_programs): Factor out programs that
require remote.
* src/libvirt_private.syms (rpc/virnet*.h): Move...
* src/libvirt_remote.syms: ...into new file.
* src/Makefile.am (SYM_FILES): Ship new syms file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Join the worker thread no matter if it is running or zombie already.
With current implementation the thread is joined iff @running is true.
However, when worker executes the last line, @running is set to false.
Hence qemuMonitorTestFree() won't join it (and free resources) even
though we can clearly see worker has run (nobody else sets @running =
false).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Right now, we are testing qemuMonitorSystemPowerdown instead of
qemuMonitorJSONSystemPowerdown. It makes no harm, as both functions have
the same header and the former is just a wrapper over the latter. But we
should be consistent as we're testing the JSON functions only in here.
This test is there to ensure that our capabilities detection code isn't
broken somehow.
How to gather test data:
Firstly, the data is split into two separate files. The former (with
suffix .replies) contains all the qemu replies. This is very fragile as
introducing a new device can mean yet another monitor command and hence
edit of this file in the future. But there's no better way of doing
this. To get this data simply turn on debug logs and copy all the
QEMU_MONITOR_IO_PROCESS lines. But be careful to not copy incomplete
ones (yeah, we report some incomplete lines too). Long story short, at
the libvirtd startup, a dummy qemu is spawn to get all the capabilities.
The latter (with suffix .caps) contains capabilities XML. Just start a
domain and copy the corresponding part from its state XML file.
Including <qemuCaps> tag.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In a few cases we might want to not care if monitor command executed on
the mocked monitor matches the one we have reply for. Sounds crazy, but
if we just want monitor to return certain values (e.g. read from a file)
there is no need to care about command match.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, when creating a new mocked monitor, the greeting can't be
chosen. This is crucial for next patches, because some info as qemu
version is obtained in the greeting message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The problem is described by [0] but its effect on libvirt is that
starting a container with a full distro running systemd after having
stopped it simply fails.
The container cleanup now calls the machined Terminate function to make
sure that everything is in order for the next run.
[0]: https://bugs.freedesktop.org/show_bug.cgi?id=68370
Currently, we have functions to handle fc_host implemented just
for linux. On all other platforms an error is thrown. It makes no
sense to run the test on those platforms then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 297c99a5 an invalid source definition XML of a character
device that is used as backend for RNG devices, smartcards and redirdevs
causes crash of the daemon when parsing such a definition.
The device types mentioned above are not a part of a regular character
device but are backends for other types. Thus when parsing such device
NULL is passed as the argument @chr_def. Later when checking the
validity of the definition @chr_def was dereferenced when parsing a UNIX
socket backend with missing path of the socket and crashed the daemon.
Sample offending configuration:
<devices>
...
<rng model='virtio'>
<backend model='egd' type='unix'>
<source mode='bind' service='1024'/>
</backend>
</rng>
</devices>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1012196
The virnetmessagetest code did not check for failure to
allocate the message object. This lead to a crash on OOM
in the test suite.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virportallocatortest did not check if the object
allocation failed in all cases. This lead to a crash
on OOM in the testsuite
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virbuftest code did not check virBufferError before
accessing the buffer contents, resulting in a crash on
OOM conditions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainChrSourceDef variable should be memset to
0, so that the cleanup block does not free uninitialized
data on OOM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuMonitorCommonTestInit method did not allocate the
test object, so it should not free it upon failure. Doing
so causes a double free with the caller.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For inexplicable reasons, the nwfilter XML parser is intentionally
ignoring errors that arise during parsing. As well as meaning that
users don't get any feedback on their XML mistakes, this will lead
it to silently drop data in OOM conditions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The vmx2xmltest test would print all errors to stderr, which
is not helpful when running OOM tests, and differs from the
behaviour of other tests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The testCompareXMLToXMLHelper method clobbered the 'ret' variable
in several places leading to a failure to report OOM errors from
the test suite.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The methods for obtaining the Xen dom ID cannot distinguish
between returning -1 due to an error and returning -1 due to
the domain being shutoff. Change them to return the dom ID
via an output parameter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves one of the issues listed in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
00:1E.0 is the location of this controller on at least some actual Q35
hardware, so we try to replicate the placement. The bridge should work
just as well in any other location though, so if 00:1E.0 isn't
available, just allow it to be auto-assigned anywhere appropriate.
This resolves one of the issues in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
This device is identical to qemu's "intel-hda" device (known as "ich6"
in libvirt), but has a different PCI device ID (which matches the ID
of the hda audio built into the ich9 chipset, of course). It's not
supported in earlier versions of qemu, so it requires a capability
bit.
The testutils.c file had some fprintfs which had not been
converted from %d to %zu, when 'testCounter' change to be
a size_t. This was a build breaker if --enable-test-oom
was enabled
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Start a test case for the virNetServerClient object, which
initially checks the creation of a virIdentityPtr object.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This splits up the version parsing code into a callable API like QEMU
help/version string parsing so that we can test it as we need to add
additional patterns for newer versions/products.
Coverity complains that the test suite did not check the
return value of dbus_message_iter_append_basic() as we did
in most other places.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves https://bugzilla.redhat.com/show_bug.cgi?id=1008903
The Q35 machinetype has an implicit SATA controller at 00:1F.2 which
isn't given the "expected" id of ahci0 by qemu when it's created. The
original suggested solution to this problem was to not specify any
controller for the disks that use the default controller and just
specify "unit=n" instead; qemu should then use the first IDE or SATA
controller for the disk.
Unfortunately, this "solution" is ignorant of the fact that in the
case of SATA disks, the "unit" attribute in the disk XML is actually
*not* being used for the unit, but is instead used to specify the
"bus" number; each SATA controller has 6 buses, and each bus only
allows a single unit. This makes it nonsensical to specify unit='n'
where n is anything other than 0. It also means that the only way to
connect more than a single device to the implicit SATA controller is
to explicitly give the bus names, which happen to be "ide.$n", where
$n can be replaced by the disk's "unit" number.
This macro is there to test the simplest monitor functions we have,
those in the form of: int ( *func) (qemuMonitorPtr). So far, we have
seven such functions.
Useful to set custom forwarders instead of using the contents of
/etc/resolv.conf. It helps me to setup dnsmasq as local nameserver to
resolve VM domain names from domain 0, when domain option is used.
Signed-off-by: Diego Woitasen <diego.woitasen@vhgroup.net>
Signed-off-by: Eric Blake <eblake@redhat.com>
A user was having an issue with this specific VMWare Fusion config and
he gave me permission to add it as part of our test suite to further
expand our VMX test coverage. Unfortunately our VMX parser and
generator does not support many features contained within and just
silently ignores fields it does not understand so they had to
be removed out in the xml2vmx test. The original unmodified version
exists in the vmx2xml test.
VMWare Fusion 5 can set the CD-ROM's device name to be 'auto detect' when
using the physical drive via 'cdrom-raw' device type. VMWare will then
connect to first available host CD-ROM to the virtual machine upon start
up according to VMWare documentation. If no device is available, it
appears that the device will remain disconnected.
To better model this a CD-ROM that is marked as "auto detect" when in
the off state would be modeled as the following with this patch:
<disk type='block' device='lun'>
<source startupPolicy='optional'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
Once the domain transitions to the powered on state, libvirt can
populate the remaining source data with what is connected, if anything.
However future power cycles, the domain may not always start with that
device attached.
A cross build to mingw fails with:
CC virsystemdtest-virsystemdtest.o
../../tests/virsystemdtest.c: In function 'testCreateNoSystemd':
../../tests/virsystemdtest.c:97:9: error: implicit declaration of function 'unsetenv' [-Werror=implicit-function-declaration]
unsetenv("FAIL_NO_SERVICE");
^
../../tests/virsystemdtest.c:97:9: error: nested extern declaration of 'unsetenv' [-Werror=nested-externs]
We could cop out and pull in the gnulib unsetenv module. But when
you stop and think about it, this test requires LD_PRELOAD to work,
and systemd is a Linux-only concept anyways, both of which mean
the test could never work on mingw in the first place. Simpler is
to just fix the test to behave like our other LD_PRELOAD tests.
* tests/virsystemdtest.c: Provide non-Linux implementation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Multiple tests need to register a function to quiesce errors from
libvirt when using a connection and doing negative tests. Each of those
tests had a static function to do so. This can be replaced by a utility
function that enables the errors when debug is enabled.
This patch adds virtTestQuiesceLibvirtErrors() and refactors test that
use private handlers.
qemu/KVM also supports a tftp URL while specifying the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='tftp' name='/url/path'>
<host name='host.name' port='69'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The ftps protocol is another protocol supported by qemu/KVM while specifying
the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftps' name='/url/path'>
<host name='host.name' port='990'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The https protocol is also accepted by qemu/KVM when specifying the cdrom ISO
image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='https' name='/url/path'>
<host name='host.name' port='443'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
Debian systems may run the 'systemd-logind' daemon, which causes the
/sys/fs/cgroup/systemd mount to be setup, but no other cgroup
controllers are created. While the LXC driver considers cgroups to
be mandatory, the QEMU driver is supposed to accept them as optional.
We detect whether they are present by looking in /proc/mounts for
any mounts of type 'cgroups', but this is not sufficient. We need to
skip any named mounts (as seen by a name=XXX string in the mount
options), so that we only detect actual resource controllers.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=721979
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The change to query org.freedesktop.DBus.ListActivatableNames
to detect systemd broke the test suite, since we did not have
stubs to respond to this dbus call.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit ef5d51d fixed a crash for numatune with auto placement and
nodeset specified:
<numatune>
<memory mode='preferred' placement='auto' nodeset='0'/>
</numatune>
Some users in Ubuntu/Debian seem to have a setup where all the
cgroup controllers are mounted on /sys/fs/cgroup rather than
any /sys/fs/cgroup/<controller> name. In the loop which detects
which controllers are present for a mount point we were modifying
'mnt_dir' field in the 'struct mntent' var, but not always restoring
the original value. This caused detection to break in the all-in-one
mount setup.
Fix that logic bug and add test case coverage for this mount
setup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If we use subdir-objects with automake, any reference to a
cross-directory .c file will result in automake creating
rules that track dependency in the cross directory. But this
presents a problem during 'make distclean' - if the cross
directory is cleaned up first, then the daemon directory will
be left with dangling references to .Po dependency files that
no longer exist.
Meanwhile, referring to the cross-directory .c file means
that we are compiling the file twice - once in src, and once
in daemon. Better is to compile just once in src into a
convenience library, and then use that library from daemon.
The tests directory had a similar situation of a cross-directory
.c file; to solve that, we actually need a convenience library.
* daemon/Makefile.am (DAEMON_SOURCES): Drop .c files...
(libvirtd_LDADD): ...and instead use library.
(libvirtd_conf_la_SOURCES): Declare a new convenience library.
(libvirtd_LDFLAGS): Drop duplicate flag.
* tests/Makefile.am (libvirtdconftest_SOURCES): Drop .c file...
(libvirtdconftest_LDADD): ..and instead use library.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commits 905629f4 and 1716e7a6 have added support for specifying
an IPv4 range and a port range to be used by NAT:
<forward mode='nat'>
<nat>
<address start='10.20.30.40' end='10.20.30.44'/>
<port start='60000' end='65432'/>
</nat>
</forward>
https://bugzilla.redhat.com/show_bug.cgi?id=1004364
An rpm build with client_only set to 1 (for example, RHEL 5 on
s390, or by modifying libvirt.spec.in) failed with
TEST: fdstreamtest
1) Stream read blocking ... OK
2) Stream read non-blocking ... Unexpected EOF block 0 want 128
FAILED
3) Stream write blocking ... OK
4) Stream write non-blocking ... Failed to finish stream: internal error: libvirt: error : cannot execute binary /home/eblake/rpmbuild/BUILD/libvirt-1.1.1/tests/../src/libvirt_iohelper: No such file or directory
Since the test depends on something that was only built for
WITH_LIBVIRTD (see src/Makefile.am), we must do the same for
the test.
* tests/Makefile.am (test_programs): Make fdstreamtest conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
Automake has builtin support to prevent botched conditional nesting,
but only if you use:
if FOO
else !FOO
endif !FOO
An example error message when using the wrong name:
daemon/Makefile.am:378: error: else reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
daemon/Makefile.am:381: error: endif reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
As our makefiles tend to have quite a bit of nested conditionals,
it's better to take advantage of the benefits of the build system
double-checking that our conditionals are well-nested, but that
requires a syntax check to enforce our usage style.
Alas, unlike C preprocessor and spec files, we can't use indentation
to make it easier to see how deeply nesting goes.
* cfg.mk (sc_makefile_conditionals): New rule.
* daemon/Makefile.am: Enforce the style.
* gnulib/tests/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
According to VMWare's documentation 'cdrom-raw' is an acceptable value
for deviceType for a CD-ROM drive. The documentation states that the VMX
configuration for a CD-ROM deviceType is as follows:
ide|scsi(n):(n).deviceType = "cdrom-raw|atapi-cdrom|cdrom-image"
From the documentation it appears the following is true:
- cdrom-image = Provides the ISO to the VM
- atapi-cdrom = Provides a NEC emulated ATAPI CD-ROM on top of the host
CD-ROM
- cdrom-raw = Passthru for a host CD-ROM drive. Allows CD-R burning from
within the guest.
A CD-ROM prior to this patch would always provide an 'atapi-cdrom' is
modeled as:
<disk type='block' device='cdrom'>
<source dev='/dev/scd0'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
This patch allows the 'device' attribute to be set to 'lun' for a raw
acccess CD-ROM such as:
<disk type='block' device='lun'>
<source dev='/dev/scd0'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
Starting with qemu 1.6, the qemu-system-arm vexpress-a9 model has a
hardcoded virtio-mmio transport which enables attaching all virtio
devices.
On the command line, we have to use virtio-XXX-device rather than
virtio-XXX-pci, thankfully s390 already set the precedent here so
it's fairly straight forward.
At the XML level, this adds a new device address type virtio-mmio.
The controller and addressing don't have any subelements at the
moment because we they aren't needed for this usecase, but could
be added later if needed.
Add a test case for an ARM guest with one of every virtio device
enabled.
Similar to the chardev bit, ARM boards depend on the old style '-net nic'
for actually instantiating net devices. But we can't block out
-netdev altogether since it's needed for upcoming virtio support.
And add tests for working ARM XML with console, disk, and networking.
On my machine, a guest fails to boot if it has a sound card, but not
graphical device/display is configured, because pulseaudio fails to
initialize since it can't access $HOME.
A workaround is removing the audio device, however on ARM boards there
isn't any option to do that, so -nographic always fails.
Set QEMU_AUDIO_DRV=none if no <graphics> are configured. Unfortunately
this has massive test suite fallout.
Add a qemu.conf parameter nographics_allow_host_audio, that if enabled
will pass through QEMU_AUDIO_DRV from sysconfig (similar to
vnc_allow_host_audio)
Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.
To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow use of the usb-storage device only if the new capability flag
QEMU_CAPS_DEVICE_USB_STORAGE is set, which it is for qemu(-kvm)
versions >= 0.12.1.2-rhel62-beta.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Ubuntu libdbus.so links with -Bsymbolic-functions, which means
that we can only LD_PRELOAD functions that we directly call.
Functions which libdbus.so calls internally can not be replaced.
Thus we cannot use dbus_message_new_error or dbus_message_new_method_return
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
QEMU commit 3984890 introduced the "pci-hole64-size" property,
to i440FX-pcihost and q35-pcihost with a default setting of 2 GB.
Translate <pcihole64>x<pcihole64/> to:
-global q35-pcihost.pci-hole64-size=x for q35 machines and
-global i440FX-pcihost.pci-hole64-size=x for i440FX-based machines.
Error out on other machine types or if the size was specified
but the pcihost device lacks 'pci-hole64-size' property.
https://bugzilla.redhat.com/show_bug.cgi?id=990418
<controller type='pci' index='0' model='pci-root'>
<pcihole64 unit='KiB'>1048576</pcihole64>
</controller>
It can be used to adjust (or disable) the size of the 64-bit
PCI hole. The size attribute is in kilobytes (different unit
can be specified on input), but it gets rounded up to
the nearest GB by QEMU.
Disabling it will be needed for guests that crash with the
64-bit PCI hole (like Windows XP), see:
https://bugzilla.redhat.com/show_bug.cgi?id=990418
The ftp protocol is already recognized by qemu/KVM so add this support to
libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftp' name='/url/path'>
<host name='host.name' port='21'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
QEMU/KVM already allows a HTTP URL for the cdrom ISO image so add this support
to libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='http' name='/url/path'>
<host name='host.name' port='80'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
qemu-img is going to switch the default for QCOW2
to QCOW2v3 (compat=1.1)
Extend the probing for qemu-img command line options to check
if -o compat is supported. If the volume definition specifies
the qcow2 format but no compat level and -o compat is supported,
specify -o compat=0.10 to create a QCOW2v2 image.
https://bugzilla.redhat.com/show_bug.cgi?id=997977
On IRC, someone complained that a system without xmllint installed
failed a number of tests.
* tests/schematestutils.sh: Probe for xmllint.
Signed-off-by: Eric Blake <eblake@redhat.com>
In tests/qemuagenttest.c, the Timeout test should always be
called last. Any additional tests should come before this.
Signed-off-by: Eric Blake <eblake@redhat.com>
Re-arrange the code so that the returned bitmap is always initialized to
NULL even on early failures and return an error message as some callers
are already expecting it. Fix up the rest not to shadow the error.
Only compile securityselinuxhelper.c if xattr support was detected to
avoid this error:
securityselinuxhelper.c:34:24: fatal error: attr/xattr.h: No such file
or directory compilation terminated.
Since all SELinux tests depend upon the securityselinuxhelper library,
these test programs are now only build when xattr support is
available.
In commit f905cc9984 a use of
uninitialized data was fixed based on a coverity report. It
turns out it was possible to trigger this issue by pointing
libvirt at non-existent certificate files, typically causing
a crash.
This adds a test case for that scenario. With the above
commit reverted, this new test case will crash with a SEGV.
With the fix applied, it passes, reporting a normal libvirt
error to the caller.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel Berrange (correctly) pointed out that we should do a better
job of testing selinux labeling fallbacks on NFS disks that lack
labeling support.
* tests/securityselinuxhelper.c (includes): Makefile already
guaranteed xattr support. Add additional headers.
(init_syms): New function, borrowing from vircgroupmock.c.
(setfilecon_raw, getfilecon_raw): Fake NFS failure.
(statfs): Fake an NFS mount point.
(security_getenforce, security_get_boolean_active): Don't let host
environment affect test.
* tests/securityselinuxlabeldata/nfs.data: New file.
* tests/securityselinuxlabeldata/nfs.xml: New file.
* tests/securityselinuxlabeltest.c (testSELinuxCreateDisks)
(testSELinuxDeleteDisks): Setup and cleanup for fake NFS mount.
(testSELinuxCheckLabels): Test handling of SELinux NFS denial.
Fix memory leak.
(testSELinuxLabeling): Avoid infinite loop on dirty tree.
(mymain): Add new test.
https://bugzilla.redhat.com/show_bug.cgi?id=924153
Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with
an attribute relabel='no' in order to try and minimize the
impact of shutdown delays when an NFS server disappears. The idea
was that if a disk is on NFS and can't be labeled in the first
place, there is no need to attempt the (no-op) relabel on domain
shutdown. Unfortunately, the way this was implemented was by
modifying the domain XML so that the optimization would survive
libvirtd restart, but in a way that is indistinguishable from an
explicit user setting. Furthermore, once the setting is turned
on, libvirt avoids attempts at labeling, even for operations like
snapshot or blockcopy where the chain is being extended or pivoted
onto non-NFS, where SELinux labeling is once again possible. As
a result, it was impossible to do a blockcopy to pivot from an
NFS image file onto a local file.
The solution is to separate the semantics of a chain that must
not be labeled (which the user can set even on persistent domains)
vs. the optimization of not attempting a relabel on cleanup (a
live-only annotation), and using only the user's explicit notation
rather than the optimization as the decision on whether to skip
a label attempt in the first place. When upgrading an older
libvirtd to a newer, an NFS volume will still attempt the relabel;
but as the avoidance of a relabel was only an optimization, this
shouldn't cause any problems.
In the ideal future, libvirt will eventually have XML describing
EVERY file in the backing chain, with each file having a separate
<seclabel> element. At that point, libvirt will be able to track
more closely which files need a relabel attempt at shutdown. But
until we reach that point, the single <seclabel> for the entire
<disk> chain is treated as a hint - when a chain has only one
file, then we know it is accurate; but if the chain has more than
one file, we have to attempt relabel in spite of the attribute,
in case part of the chain is local and SELinux mattered for that
portion of the chain.
* src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new
member.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML):
Parse it, for live images only.
(virSecurityDeviceLabelDefFormat): Output it.
(virDomainDiskDefParseXML, virDomainChrSourceDefParseXML)
(virDomainDiskSourceDefFormat, virDomainChrDefFormat)
(virDomainDiskDefFormat): Pass flags on through.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip
when possible.
(virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not
norelabel, if labeling fails.
(virSecuritySELinuxSetFileconHelper): Fix indentation.
* docs/formatdomain.html.in (seclabel): Document new xml.
* docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml:
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml:
New test files.
* tests/qemuxml2argvtest.c (mymain): Run the new tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Coverity reported a memleak in the test added in 7efd5fd1b0. In case
the code will be broken and the code will actually parse a faulty bitmap
the resulting pointer would be leaked. Free it although that shouldn't
ever happen.
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model. This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Previous patch fixed an issue where, when parsing a bitmap from the
string, the bounds of the bitmap weren't checked. That flaw resulted into
crashes. This test tests that case to avoid it in the future.
This resolves the issue that prompted the filing of
https://bugzilla.redhat.com/show_bug.cgi?id=928638
(although the request there is for something much larger and more
general than this patch).
commit f3868259ca disabled the
forwarding to upstream DNS servers of unresolved DNS requests for
names that had no domain, but were just simple host names (no "."
character anywhere in the name). While this behavior is frowned upon
by DNS root servers (that's why it was changed in libvirt), it is
convenient in some cases, and since dnsmasq can be configured to allow
it, it must not be strictly forbidden.
This patch restores the old behavior, but since it is usually
undesirable, restoring it requires specification of a new option in
the network config. Adding the attribute "forwardPlainNames='yes'" to
the <dns> elemnt does the trick - when that attribute is added to a
network config, any simple hostnames that can't be resolved by the
network's dnsmasq instance will be forwarded to the DNS servers listed
in the host's /etc/resolv.conf for an attempt at resolution (just as
any FQDN would be forwarded).
When that attribute *isn't* specified, unresolved simple names will
*not* be forwarded to the upstream DNS server - this is the default
behavior.
I noticed this yesterday and fixed it in a different way, but ended up
with one more problem. It was probably the way I fixed it combined
with one more filename changed.
Anyway, why I'm saying this is that one more filename should be renamed
in order to avoid a race (which I was unable to reproduce, though).
I checked this is the last file those two tests have in common by going
through the code and the re-checked by this "script":
strace -o session.trace -e open ./virnettlssessiontest
strace -o context.trace -e open ./virnettlscontexttest
sort \
<(sed -n '/^open/s/open("\([^"]*\)",.*$/\1/p' context.trace | sort -u)\
<(sed -n '/^open/s/open("\([^"]*\)",.*$/\1/p' session.trace | sort -u)\
| uniq -d| grep '.pem$'
So it should be enough to make these tests independent of each other.
Signed-off-by: Eric Blake <eblake@redhat.com>
otherwise having a strict --no-copy-dt-needed-entries fails in several
places like:
CCLD virdbustest
/usr/bin/ld: virdbustest-virdbustest.o: undefined reference to symbol 'dbus_message_unref'
/lib/x86_64-linux-gnu/libdbus-1.so.3: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
The logic set up in previous patch for exposing VIR_TEST_EXPENSIVE
to individual tests is as follows:
make check VIR_TEST_EXPENSIVE=0 => getenv("VIR_TEST_EXPENSIVE") sees "0"
make check VIR_TEST_EXPENSIVE=1 => getenv("VIR_TEST_EXPENSIVE") sees "1"
make check => getenv("VIR_TEST_EXPENSIVE") sees
either "0" or "1", based on configure options
cd tests; ./FOOtest => getenv("VIR_TEST_EXPENSIVE") sees
whatever is in your environment (usually NULL, but possibly garbage)
Merely checking if VIR_TEST_EXPENSIVE is set in the environment
does the wrong thing; likewise, it is unsafe to assume the
variable will always contain a valid number.
As such, it helps to have helper functions, instead of making each
expensive test repeat the probe of the environment.
* tests/testutils.h (virTestGetExpensive): New prototype.
* tests/testutils.c (virTestGetExpensive): Implement it.
* tests/test-lib.sh (very_expensive_): Rename...
(test_expensive): ...and tweak to use VIR_TEST_EXPENSIVE.
Signed-off-by: Eric Blake <eblake@redhat.com>
The gnulib testsuite is relatively stable - the only times it is
likely to have a test change from pass to fail is on a gnulib
submodule update or a major system change (such as moving from
Fedora 18 to 19, or other large change to libc). While it is an
important test for end users on arbitrary machines (to make sure
that the portability glue works for their machine), it mostly
wastes time for development testing (as most developers aren't
making any of the major changes that would cause gnulib tests
to alter behavior). Thus, it pays to make the tests optional
at configure time, defaulting to off for development, on for
tarballs, with autobuilders requesting it to be on. It also
helps to allow a make-time override, via VIR_TEST_EXPENSIVE=[01]
(much the way automake sets up V=[01] for overriding the configure
time default of how verbose to be).
Automake has some pretty hard-coded magic with regards to the
TESTS variable; I had quite a job figuring out how to keep
'make distcheck' passing regardless of the configure option
setting in use, while still disabling the tests at runtime
when I did not configure them on and did not use the override
variable. Thankfully, we require GNU make, which lets me
hide some information from Automake's magic handling of TESTS.
* bootstrap.conf (bootstrap_epilogue): Munge gnulib test variable.
* configure.ac (--enable-expensive-tests): Add new enable switch.
(VIR_TEST_EXPENSIVE_DEFAULT, WITH_EXPENSIVE_TESTS): Set new
witnesses.
* gnulib/tests/Makefile.am (TESTS): Make tests conditional on
configure settings and the VIR_TEST_EXPENSIVE variable.
* tests/Makefile.am (TESTS_ENVIRONMENT): Expose VIR_TEST_EXPENSIVE
to all tests.
* autobuild.sh: Enable all tests during autobuilds.
* libvirt.spec.in (%configure): Likewise.
* mingw-libvirt.spec.in (%mingw_configure): Likewise.
* docs/hacking.html.in: Document the option.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit f1088c8 weakened a test, by not passing a value larger
than INT_MAX through an int slot. Make the fix in a different
way, using an explicit negative value. Suggested by Dan Berrange.
* tests/virdbustest.c (testMessageArray): Adjust previous fix.
(testMessageStruct): Use a negative number.
Signed-off-by: Eric Blake <eblake@redhat.com>
Compiling with gcc 4.1.2 (RHEL 5) on a 32-bit platform complains:
virdbustest.c: In function 'testMessageSimple':
virdbustest.c:61: warning: integer constant is too large for 'long' type
virdbustest.c:62: warning: integer constant is too large for 'long' type
virdbustest.c: In function 'testMessageArray':
virdbustest.c:183: warning: this decimal constant is unsigned only in ISO C90
virdbustest.c: In function 'testMessageStruct':
virdbustest.c:239: warning: integer constant is too large for 'long' type
virdbustest.c:240: warning: integer constant is too large for 'long' type
* tests/virdbustest.c (testMessageSiple, testMessageArray)
(testMessageStruct): Don't violate C89 constant constraints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use a separate keyfile name for the two TLS test suites so that
they don't clash when running tests in parallel
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On RHEL 5, with dbus 1.1.2, compilation failed with:
virsystemdmock.c: In function 'dbus_connection_send_with_reply_and_block':
virsystemdmock.c:68: warning: implicit declaration of function 'dbus_message_set_serial'
Fix this by instead bypassing all attempts to use a dbus serial.
* tests/virsystemdmock.c (dbus_message_set_reply_serial): Add new
override.
(dbus_connection_send_with_reply_and_block): No longer bother with
the serial.
Signed-off-by: Eric Blake <eblake@redhat.com>
The code added to validate CA certificates did not take into
account the possibility that the cacert.pem file can contain
multiple (concatenated) cert data blocks. Extend the code for
loading CA certs to use the gnutls APIs for loading cert lists.
Add test cases to check that multi-level trees of certs will
validate correctly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently a 'struct testTLSCertReq' instance is passed into
the TLS test cases. This is not flexible enough to cope with
certificate chains, where one file now corresponds to multiple
certificates. Change the test cases so that we pass in filenames
instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently every test case in the TLS test suite generates the
certs fresh. This is a waste of time, since its parameters
don't change across test cases. Create certs once in main
method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virnettlscontexttest.c tests both virNetTLSContext
and virNetTLSSession functionality. Split into two
separate tests, to make the code size more manageable
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
q35 machines have an implicit ahci (sata) controller at 00:1F.2 which
has no "id" associated with it. For this reason, we can't refer to it
as "ahci0". Instead, we don't give an id on the commandline, which
qemu interprets as "use the first ahci controller". We then need to
specify the unit with "unit=%d" rather than adding it onto the bus
arg.
We had been setting the device alias in the devinceinfo for pci
controllers to "pci%u", but then hardcoding "pci.%u" when creating the
device address for other devices using that pci bus. This all worked
just fine until we encountered the built-in "pcie.0" bus (the PCIe
root complex) in Q35 machines.
In order to create the correct commandline for this one case, this
patch:
1) sets the alias for PCI controllers correctly, to "pci.%u" (or
"pcie.%u" for the pcie-root controller)
2) eliminates the hardcoded "pci.%u" for pci controllers when
generatuing device address strings, and instead uses the controller's
alias.
3) plumbs a pointer to the virDomainDef all the way down to
qemuBuildDeviceAddressStr. This was necessary in order to make the
aliase of the controller *used by a device* available (previously
qemuBuildDeviceAddressStr only had the deviceinfo of the device
itself, *not* of the controller it was connecting to). This made for a
larger than desired diff, but at least in the future we won't have to
do it again, since all the information we could possibly ever need for
future enhancements is in the virDomainDef. (right?)
This should be done for *all* controllers, but for now we just do it
in the case of PCI controllers, to reduce the likelyhood of
regression.
This patch adds in special handling for a few devices that need to be
treated differently for q35 domains:
usb - there is no implicit/default usb controller for the q35
machinetype. This is done because normally the default usb controller
is added to a domain by just adding "-usb" to the qemu commandline,
and it's assumed that this will add a single piix3 usb1 controller at
slot 1 function 2. That's not what happens when the machinetype is
q35, though. Instead, adding -usb to the commandline adds 3 usb
(version 2) controllers to the domain at slot 0x1D.{1,2,7}. Rather
than having
<controller type='usb' index='0'/>
translate into 3 separate devices on the PCI bus, it's cleaner to not
automatically add a default usb device; one can always be added
explicitly if desired. Or we may decide that on q35 machines, 3 usb
controllers will be automatically added when none is given. But for
this initial commit, at least we aren't locking ourselves into
something we later won't want.
video - qemu always initializes the primary video device immediately
after any integrated devices for the machinetype. Unless instructed
otherwise (by using "-device vga..." instead of "-vga" which libvirt
uses in many cases to work around deficiencies and bugs in various
qemu versions) qemu will always pick the first unused slot. In the
case of the "pc" machinetype and its derivatives, this is always slot
2, but on q35 machinetypes, the first free slot is slot 1 (since the
q35's integrated peripheral devices are placed in other slots,
e.g. slot 0x1f). In order to make the PCI address of the video device
predictable, that slot (1 or 2, depending on machinetype) is reserved
even when no video device has been specified.
sata - a q35 machine always has a sata controller implicitly added at
slot 0x1F, function 2. There is no way to avoid this controller, so we
always add it. Note that the xml2xml tests for the pcie-root and q35
cases were changed to use DO_TEST_DIFFERENT() so that we can check for
the sata controller being automatically added. This is especially
important because we can't check for it in the xml2argv output (it has
no effect on that output since it's an implicit device).
ide - q35 has no ide controllers.
isa and smbus controllers - these two are always present in a q35 (at
slot 0x1F functions 0 and 3) but we have no way of modelling them in
our config. We do need to reserve those functions so that the user
doesn't attempt to put anything else there though. (note that the "pc"
machine type also has an ISA controller, which we also ignore).
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.
Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.
Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.
This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.
Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
The shutdown test utilizes waiting for condition to exit the test. This
addition will return an error for the shutdown command to see if the
condition waiting code will not hang.
Coverity complained about unused variable that contains the shutdown
mode. The original intention was to check it against the requested mode.
Also the fixed check revealed a mistake in the expected shutdown mode.
Reported by John Ferlan.
When building libvirt with -O0 flag in fedora 19, it will fail to
generate qemuagenttest, a link error occurs like:
./.libs/libqemumonitortestutils.a(qemumonitortestutils.o): In function `qemuMonitorTestFree':
libvirt/tests/qemumonitortestutils.c:346: undefined reference to `qemuMonitorClose'
./.libs/libqemumonitortestutils.a(qemumonitortestutils.o): In function `qemuMonitorTestNew':
libvirt/tests/qemumonitortestutils.c:870: undefined reference to `qemuMonitorOpen'
collect2: error: ld returned 1 exit status
Fix it by listing libraries in the correct order to avoid lazy linkage.
Signed-off-by: Eric Blake <eblake@redhat.com>
Systemd uses a named cgroup mount for tracking processes. Add
it as another type of controller, albeit one which we have to
special case in a number of places. In particular we must
never create/delete directories there, nor add tasks. Essentially
the systemd mount is to be considered read-only for libvirt.
With this change both the virCgroupDetectPlacement and
virCgroupCopyPlacement methods must be invoked. The copy
placement method will copy setup for resource controllers
only. The detect placement method will probe for any
named controllers, or resource controllers not already
setup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are some interesting escaping rules to consider when dealing
with systemd slice/scope names. Thus it is helpful to have APIs
for formatting names
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the JSON error messages to report errors back to the caller in
addition to erroring out. The error reported from the event loop from
the mock function of the monitor was later overwritten by the call to
the monitor/agent interaction API. This will also allow testing of error
reporting.
The normal monitor uses windows line endings, where the agent monitor
uses only newlines. Change this to tolerate both approaches and allow to
use the utilities for guest agent tests.
Refactor the test helpers to allow adding callbacks to verify the
monitor responses instead of simple command name checking and clean up
various parts to prepare for adding guest agent tests.
The instrumentation for the monitor test can be hacked for qemu agent
testing. Split out the monitor specific stuff to allow using the code in
guest agent tests in the future.
The qemumonitorjsontest crashed when one of the initialization steps
done before starting the worker thread failed. This patch fixes this by
trying to pthread_join() the thread only after it was created.
Commit 93ec384 was tested on mingw, but broke the build on Linux:
CCLD shunloadtest
shunloadtest.o: In function `main':
/home/eblake/libvirt/tests/shunloadtest.c:106: undefined reference to `virFilePrintf'
...
ssh.o: In function `main':
/home/eblake/libvirt/tests/ssh.c:43: undefined reference to `virFilePrintf'
/home/eblake/libvirt/tests/ssh.c:49: undefined reference to `virFilePrintf'
* tests/testutils.h (fprintf): Provide escape hatch.
* tests/shunloadtest.c: Use it.
* tests/ssh.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit a2619962 introduced virFilePrintf to work around the fact
that gnulib doesn't (yet) provide guarantees about fprintf() vs.
%z, which in turn causes all sorts of mingw compilation errors:
../../tests/testutils.c: In function 'virtTestResult':
../../tests/testutils.c:101:9: error: unknown conversion type character 'z' in format [-Werror=format=]
fprintf(stderr, "%3zu) %-60s ", testCounter, name);
^
Rather than s/fprintf/virFilePrintf/ (and reformatting loads of
lines) across multiple files, it's easier to just hack the entire
testsuite to take advantage of our helper function.
* tests/testutils.c: s/fprintf/virFilePrintf/ for mingw.
Signed-off-by: Eric Blake <eblake@redhat.com>
A cross-compile to mingw failed:
CC virsystemdmock_la-virsystemdmock.lo
../../tests/virsystemdmock.c:29:6: error: 'dbus_connection_set_change_sigpipe' redeclared without dllimport attribute: previous dllimport ignored [-Werror=attributes]
void dbus_connection_set_change_sigpipe(dbus_bool_t will_modify_sigpipe ATTRIBUTE_UNUSED)
^
But when you think about it, systemd is Linux-only, and even our
use of LD_PRELOAD to provide mock syscalls is Linux-only.
* tests/virsystemdmock.c: Avoid compilation outside Linux.
Signed-off-by: Eric Blake <eblake@redhat.com>
The way we were casting small (<32bit) integers was broken
on big endian hosts, causing stack smashing. This was detected
in the test suite either by test failures due to incorrect
results, or by libc/gcc abort'ing with its stack canary
triggered.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=981094
The commit 0ad9025ef introduce qemu flag QEMU_CAPS_DEVICE_VIDEO_PRIMARY
for using -device VGA, -device cirrus-vga, -device vmware-svga and
-device qxl-vga. In use, for -device qxl-vga, mouse doesn't display
in guest window like the desciption in above bug.
This patch try to use -device for primary video when qemu >=1.6 which
contains the bug fix patch
Ignore NULL pool in testSetVolumeType to silence Coverity,
even though we only call it with NULL pool when vol is also NULL.
(13) Event var_deref_model: Passing null pointer "inputpool" to
function "testSetVolumeType(virStorageVolDefPtr, virStoragePoolDefPtr)",
which dereferences it. [details]
Also see events: [assign_zero]
95 testSetVolumeType(inputvol, inputpool);
since sizeof(int) != sizeof(long long) on 32bit archs.
This unbreaks virdbustest which otherwise fails like:
(gdb) bt
#0 __strlen_sse2_bsf () at ../sysdeps/i386/i686/multiarch/strlen-sse2-bsf.S:50
#1 0x405907d2 in ?? () from /lib/i386-linux-gnu/libdbus-1.so.3
#2 0x4057c140 in ?? () from /lib/i386-linux-gnu/libdbus-1.so.3
#3 0x4057e7ec in dbus_message_iter_append_basic () from /lib/i386-linux-gnu/libdbus-1.so.3
#4 0x400742ec in virDBusMessageIterEncode (args=0xbfd4b8f0 "k\321\004\b.", types=0x804d260 "",
rootiter=0xbfd4b844) at util/virdbus.c:560
#5 virDBusMessageEncodeArgs (msg=msg@entry=0x893c278, types=types@entry=0x804d25c "sais",
args=args@entry=0xbfd4b8d8 "r\320\004\b\003") at util/virdbus.c:921
#6 0x40075917 in virDBusMessageEncode (msg=0x893c278, types=0x804d25c "sais") at util/virdbus.c:959
#7 0x0804a4a1 in testMessageArray (args=0x0) at virdbustest.c:195
#8 0x0804c404 in virtTestRun (title=title@entry=0x804cfcb "Test message array ",
nloops=nloops@entry=1, body=body@entry=0x804a3f0 <testMessageArray>, data=data@entry=0x0)
at testutils.c:168
#9 0x08049346 in mymain () at virdbustest.c:384
#10 0x0804cb2e in virtTestMain (argc=argc@entry=1, argv=argv@entry=0xbfd4bb24,
func=func@entry=0x80492c0 <mymain>) at testutils.c:764
#11 0x080491af in main (argc=1, argv=0xbfd4bb24) at virdbustest.c:393
Reuse the XML files in storagevolxml2xmlin.
(This requires changing a few backing files to /dev/null,
since virStorageBackendCreateQemuImgCmd checks for its
presence)
Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports
all share the same namespace, they are all defined as controllers of
type='pci' in libvirt (but with a differing model attribute). Each of
these controllers has a certain connection type upstream, allows
certain connection types downstream, and each can either allow a
single downstream connection at slot 0, or connections from slot 1 -
31.
Right now, we only support the pci-root and pci-bridge devices, both
of which only allow PCI devices to connect, and both which have usable
slots 1 - 31. In preparation for adding other types of controllers
that have different capabilities, this patch 1) adds info to the
qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets
those capabilities appropriately for pci-root and pci-bridge devices,
and 3) validates that the controller being connected to is the proper
type when allocating slots or validating that a user-selected slot is
appropriate for a device..
Having this infrastructure in place will make it much easier to add
support for the other PCI controller types.
While it would be possible to do all the necessary checking by just
storing the controller model in the qemyuDomainPCIAddressBus, it
greatly simplifies all the validation code to also keep a "flags",
"minSlot" and "maxSlot" for each - that way we can just check those
attributes rather than requiring a nearly identical switch statement
everywhere we need to validate compatibility.
You may notice many places where the flags are seemingly hard-coded to
QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI
This is currently the correct value for all PCI devices, and in the
future will be the default, with small bits of code added to change to
the flags for the few devices which are the exceptions to this rule.
Finally, there are a few places with "FIXME" comments. Note that these
aren't indicating places that are broken according to the currently
supported devices, they are places that will need fixing when support
for new PCI controller models is added.
To assure that there was no regression in the auto-allocation of PCI
addresses or auto-creation of integrated pci-root, ide, and usb
controllers, a new test case (pci-bridge-many-disks) has been added to
both the qemuxml2argv and qemuxml2xml tests. This new test defines a
domain with several dozen virtio disks but no pci-root or
pci-bridges. The .args file of the new test case was created using
libvirt sources from before this patch, and the test still passes
after this patch has been applied.
The implicit IDE, USB, and video controllers provided by the PIIX3
chipset in the pc-* machinetypes are not present on other
machinetypes, so we shouldn't be doing the special checking for
them. This patch places those validation checks into a separate
function that is only called for machine types that have a PIIX3 chip
(which happens to be the i440fx-based pc-* machine types).
One qemuxml2argv test data file had to be changed - the
pseries-usb-multi test had included a piix3-usb-uhci device, which was
being placed at a specific address, and also had slot 2 auto reserved
for a video device, but the pseries virtual machine doesn't actually
have a PIIX3 chip, so even if there was a piix3-usb-uhci driver for
it, the device wouldn't need to reside at slot 1 function 2. I just
changed the .argv file to have the generic slot info for the two
devices that results when the special PIIX3 code isn't executed.
The virCgroupNewDomainDriver and virCgroupNewDriver methods
are obsolete now that we can auto-detect existing cgroup
placement. Delete them to reduce code bloat.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If systemd machine does not exist, return -2 instead of -1,
so that applications don't need to repeat the tedious error
checking code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are two ways to use a iSCSI LUN as disk source for qemu.
* The LUN's path as it shows up on host, e.g.
/dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1
* The libiscsi URI from the storage pool source element host attribute, e.g.
iscsi://demo.org:6000/iqn.1992-01.com.example/1
For a "volume" type disk, if the specified "pool" is of iscsi
type, we should support to use the LUN in either of above 2 ways.
That's why to introduce a new XML tag "mode" for the disk source
(libvirt should support iscsi pool with libiscsi, but it's another
new feature, which should be done later).
The "mode" can be either of "host" or "direct". Use "host" to indicate
use of the LUN with the path as it shows up on host. Use "direct" to
indicate to use it with the source pool host URI (future patches may support
to use network type libvirt storage too, e.g. Ceph)
Commit 58b147ad07 added a test for
qemuMonitorGetDeviceAliases but forgot to free the test object at the
end which causes all sort of weird errors and failures when new tests
are added after the GetDeviceAliases.
To register virtual machines and containers with systemd-machined,
and thus have cgroups auto-created, we need to talk over DBus.
This is somewhat tedious code, so introduce a dedicated function
to isolate the DBus call in one place.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Doing DBus method calls using libdbus.so is tedious in the
extreme. systemd developers came up with a nice high level
API for DBus method calls (sd_bus_call_method). While
systemd doesn't use libdbus.so, their API design can easily
be ported to libdbus.so.
This patch thus introduces methods virDBusCallMethod &
virDBusMessageRead, which are based on the code used for
sd_bus_call_method and sd_bus_message_read. This code in
systemd is under the LGPLv2+, so we're license compatible.
This code is probably pretty unintelligible unless you are
familiar with the DBus type system. So I added some API
docs trying to explain how to use them, as well as test
cases to validate that I didn't screw up the adaptation
from the original systemd code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Until now CPU features inherited from a specified CPU model could only
be overridden with 'disable' policy. With this patch, any explicitly
specified feature always overrides the same feature inherited from a CPU
model regardless on the specified policy.
The CPU in x86-exact-force-Haswell.xml would previously be incompatible
with x86-host-SandyBridge.xml CPU even though x86-host-SandyBridge.xml
provides all features required by x86-exact-force-Haswell.xml.
The alias for hostdevs of type SCSI can be too long for QEMU if
larger LUNs are encountered. Here's a real life example:
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='19' unit='1088634913'/>
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
this results in a too long drive id, resulting in QEMU yelling
Property 'scsi-generic.drive' can't find value 'drive-hostdev-scsi_host0-0-19-1088634913'
This commit changes the alias back to the default hostdev$(index)
scheme.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The code parsing VIR_TEST_RANGE mistakenly used 'unsigned int i'
which violated syntax-check rules
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When debugging a failing test with many test cases, it is useful
to be able to skip most tests. Introducing a new environment
variable VIR_TEST_RANGE=N-M enables execution of only the test
cases numbered N-M inclusive, starting from 1.
For example, to skip all the cgroup tests except 2
$ VIR_TEST_RANGE=2-3 VIR_TEST_DEBUG=1 ./vircgrouptest
TEST: vircgrouptest
2) New cgroup for driver ... Unexpected found LXC cgroup: 1
libvirt: Cgroup error : Failed to create controller cpu for group: No such file or directory
FAILED
3) New cgroup for domain driver ... Cannot find LXC cgroup: 1
libvirt: Cgroup error : Failed to create controller cpu for group: No such file or directory
FAILED
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Makefiles are another easy file to enforce line limits.
Mostly straightforward; interesting tricks worth noting:
src/Makefile.am: $(confdir) was already defined, use it in more places
tests/Makefile.am: path_add and VG required some interesting compression
* cfg.mk (sc_prohibit_long_lines): Add another test.
* Makefile.am: Fix offenders.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Long lines are harder to read and harder to diff; in fact, if lines get
too long (> 1000 bytes), it starts causing issues where git send-email
refuses to send patches for the file. I've cleaned up the tests
directory in the past (see commits bd6c46f, 3b750d1), but new long
lines have been introduced in the meantime.
Why 90 instead of 80? Because there were too many tests on the fringe
edge, and I didn't want to edit that many files.
Add a syntax check to prevent future long lines.
* cfg.mk (sc_prohibit_long_lines): New rule.
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Split lines of any
file with content longer than 90 columns.
* tests/storagevolxml2argvdata/*.argv: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
If testQemuHotplugAttach succeeds, the vm->def steals the dev pointer.
However, not the envelope, which needs to be freed. In addition,
driver.config is allocated, but never freed.
When virAsprintf was changed from a function to a macro
reporting OOM error in dc6f2da, it was documented as returning
0 on success. This is incorrect, it returns the number of bytes
written as asprintf does.
Some of the functions were converted to use virAsprintf's return
value directly, changing the return value on success from 0 to >= 0.
For most of these, this is not a problem, but the change in
virPCIDriverDir breaks PCI passthrough.
The return value check in virhashtest pre-dates virAsprintf OOM
conversion.
vmwareMakePath seems to be unused.
Merge the virCommandPreserveFD / virCommandTransferFD methods
into a single virCommandPasFD method, and use a new
VIR_COMMAND_PASS_FD_CLOSE_PARENT to indicate their difference
in behaviour
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When using logical pools, we had to trust the target->path provided.
This parameter, however, can be completely ommited and we can use
'/dev/<source.name>' safely and populate it to target.path.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=952973
The test is currently testing just device update function. However,
chardev hotplug is implemented just for device attach and detach. This
fact means, the test needs to be rewritten (the majority of the code is
still shared). Moreover, we are now able to pass VM among multiple test
runs. So for instance, while we add a device in the first run, we can
remove it in the second run.
The existing 'chap' XML logic was never used - just defined. Rather than
try to insert a square peg into a round hole, blow it up and rewrite the
logic to follow the 'ceph' format.
Remove the former "chap.login" and "chap.passwd" fields and replace
with "chap.username" and "chap.secret" in _virStoragePoolAuthChap.
Adjust the virStoragePoolDefParseAuthChap() to process.
Change the rng file to describe the new layout
Update the formatstorage.html to describe the usage of the secret element
to mention that the secret type "iscsi" and "ceph" can be used
to storage pool too.
Update the formatsecret.html to include a reference to the storage pool
Update tests to handle the changes from 'login' and 'passwd' to 'username'
and '<secret>' format
Add a new qemuMonitorJSONSetObjectProperty() method to support invocation
of the 'qom-set' JSON monitor command with a provided path, property, and
expected data type to set.
NOTE: The set API was added only for the purpose of the qemumonitorjsontest
The test code uses the same "/machine/i440fx" property as the get test and
attempts to set the "realized" property to "true" (which it should be set
at anyway).
Add a new qemuMonitorJSONGetObjectProperty() method to support invocation
of the 'qom-get' JSON monitor command with a provided path, property, and
expected data type return. The qemuMonitorJSONObjectProperty is similar to
virTypedParameter; however, a future patch will extend it a bit to include
a void pointer to balloon driver statistic data.
NOTE: The ObjectProperty structures and API are added only for the
purpose of the qemumonitorjsontest
The provided test will execute a qom-get on "/machine/i440fx" which will
return a property "realized".
Add a new qemuMonitorJSONGetObjectListPaths() method to support invocation
of the 'qom-list' JSON monitor command with a provided path.
NOTE: The ListPath structures and API's are added only for the
purpose of the qemumonitorjsontest
The returned list of paired data fields of "name" and "type" that can
be used to peruse QOM configuration data and eventually utilize for the
balloon statistics.
The test does a "{"execute":"qom-list", "arguments": { "path": "/"}}" which
returns "{"return": [{"name": "machine", "type": "child<container>"},
{"name": "type", "type": "string"}]}" resulting in a return of an array
of 2 elements with [0].name="machine", [0].type="child<container>". The [1]
entry appears to be a header that could be used some day via a command such
as "virsh qemuobject --list" to format output.
The function being introduced is responsible for preparing and
executing 'chardev-add' qemu monitor command. Moreover, in case
of PTY chardev, the corresponding pty path is updated.
Recent changes uncovered a NEGATIVE_RETURNS in the return from sysconf()
when processing a for loop in virtTestCaptureProgramExecChild() in
testutils.c
Code review uncovered 3 other code paths with the same condition that
weren't found by Covirity, so fixed those as well.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Actually, I'm turning this function into a macro as filename,
function name and line number needs to be passed. The new
function virAsprintfInternal is introduced with the extended set
of arguments.
Two complaints of RESOURCE_FREE due to going to cleanup prior to a
VIR_FREE(line). Two complaints of FORWARD_NULL due to 'tmp' being
accessed after a strchr() without first checking if the return was NULL.
While looking at the code it seems that 'line' need only be allocated
once as the while loop will keep reading into line until eof causing
an unreported leak since line was never VIR_FREE()'d at the bottom of
the loop.
<hyperv>
<spinlocks state='off'/>
</hyperv>
results in:
error: XML error: missing HyperV spinlock retry count
Don't require retries when state is off and use virXPathUInt
instead of virXPathString to simplify parsing.
https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19
Implement check whether (maximum) vCPUs doesn't exceed machine
type's cpu-max settings.
On older versions of QEMU the check is disabled.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Implicit controllers may be dependent on device definitions altered
in a post-parse callback. Specifically, if a console device is
defined without the target type, the type will be set in QEMU's
callback. In the case of s390, this is virtio, which requires
an implicit virtio-serial controller.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
For s390 the default console target type is virtio. This also requires
that an implicit virtio-serial controller is instantiated.
This testcase verifies that the target type of virtio is correctly set
in the generated XML if no target element was given and that the
corresponding virtio-serial element is generated too.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This includes adding it to the nodedev parser and formatter, docs, and
test.
An example of the new iommuGroup element that is a part of the output
from "virsh nodedev-dumpxml" (virNodeDeviceGetXMLDesc()):
<device>
<name>pci_0000_02_00_1</name>
<capability type='pci'>
...
<iommuGroup number='12'>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/>
</iommuGroup>
</capability>
</device>
commit 0fc12bca added a new test called qemuhotplugtest which has
several data files in tests/qemuhotplugtestdata, but didn't add that
directory to EXTRA_DIST in the tests Makefile.am, so the make check
done during a make rpm was failing due to missing data files.
As my punishment for the break in 7f15ebc7 (fixed in 752596b5dd) I'm
introducing this test to make sure it won't happen again. Currently,
only test for <graphics/> is supported.
This patch adds functionality to allow libvirt to configure the
'native-tagged' and 'native-untagged' modes on openvswitch networks.
Signed-off-by: Laine Stump <laine@redhat.com>
Add <features> and <compat> elements to volume target XML.
<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.
<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
Currently, a listen address for a SPICE server can be specified. Later,
when the domain is migrated, we need to relocate the graphics which
involves telling new destination to the SPICE server. However, we can't
just assume the listen address is the new location, because the listen
address can be ANYCAST (0.0.0.0 for IPv4, :: for IPv6). In which case,
we want to pass the remote hostname. But there are some troubles with
ANYCAST. In both IPv4 and IPv6 it has many ways for specifying such
address. For instance, in IPv4: 0, 0.0, 0.0.0, 0.0.0.0. The number of
variations gets bigger in IPv6 world. Hence, in order to check for
ANYCAST address sanely, we should take the provided listen address,
parse it and format back in it's full form. Which is exactly what this
patch does.
If the creation of the commandline failed, libvirt always reported "out
of memory" from the virCommandToString function rather than the proper
error that happened in virStorageBackendCreateQemuImgCmd. Error out
earlier.
With unknown good reasons, the attribute "bus" of scsi device
address is always set to 0, same for attribute "target". (See
virDomainDiskDefAssignAddress).
Though we might need to change the algorithm to honor "bus"
and "target" too, that's a different issue. The address generator
for scsi host device in this patch just follows the unknown
good reasons, only considering the "controller" and "unit".
It walks through all scsi controllers and their units, to see
if the address $controller:0:0:$unit can be used (if not used
by any disk or scsi host device yet), if found one, it sits on
it, otherwise, it creates a new controller (actually the controller
is implicitly created by someone else), and sits on
$new_controller:0:0:0 instead.
A mingw build (where the qemu driver is not built, so WITH_QEMU
is undefined) failed with:
In file included from ../../src/qemu/qemu_command.h:30:0,
from ../../tests/testutilsqemu.h:4,
from ../../tests/networkxml2xmltest.c:14:
../../src/qemu/qemu_conf.h:53:4: error: #error "Port me"
But since testutilsqemu.c is already conditional, the header
should be likewise.
* tests/testutilsqemu.h: Make content conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
We can't use GNULIB's fprintf-posix due to licensing
incompatibilities. We do already have a portable
formatting via virAsprintf() which we got from GNULIB
though. We can use to create a virFilePrintf() function.
But really gnulib could just provide a 'fprintf'
module, that depended on just its 'asprintf' module.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It may shorten the code a bit as the following pattern:
VIR_STRNDUP(dst, src, cond ? n : strlen(src))
is used on several places among our code. However, we can
move the strlen into virStrndup and thus write just:
VIR_STRNDUP(dst, src, cond ? n : -1)
Currently, the controllers argument to virCgroupDetect acts both as
a result filter and a required controller specification, which is
a bit overloaded. If both functionalities are needed, it would be
better to have them seperated into a filter and a requirement mask.
The only situation where it is used today is to ensure that only
CPU related controllers are used for the VCPU directories. But here
we clearly do not want to enforce the existence of cpu, cpuacct and
specifically not cpuset at the same time.
This commit changes the semantics of controllers to "filter only".
Should a required mask ever be needed, more work will have to be done.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This attribute is going to represent number of queues for
multique vhost network interface. This commit implements XML
extension part of the feature and add one test as well. For now,
we can only do xml2xml test as qemu command line generation code
is not adapted yet.
The shunloadStart function didn't check the status of virInitialize which
was flagged by Coverity. Adjust the function and shunloadtest in order
to handle the situation.
Since 0d70656afd, it starts to access the sysfs files to build
the qemu command line (by virSCSIDeviceGetSgName, which is to find
out the scsi generic device name by adpater🚌target:unit), there
is no way to work around, qemu wants to see the scsi generic device
like "/dev/sg6" anyway.
And there might be other places which need to access sysfs files
when building qemu command line in future.
Instead of increasing the arguments of qemuBuildCommandLine, this
introduces a new callback for qemuBuildCommandLine, and thus tests
can register their own callbacks for sysfs test input files accessing.
* src/qemu/qemu_command.h: (New callback struct
qemuBuildCommandLineCallbacks;
extern buildCommandLineCallbacks)
* src/qemu/qemu_command.c: (wire up the callback struct)
* src/qemu/qemu_driver.c: (Use the new syntax of qemuBuildCommandLine)
* src/qemu/qemu_hotplug.c: Likewise
* src/qemu/qemu_process.c: Likewise
* tests/testutilsqemu.[ch]: (Helper testSCSIDeviceGetSgName;
callback struct testCallbacks;)
* tests/qemuxml2argvtest.c: (Use testCallbacks)
* src/tests/qemuxmlnstest.c: (Like above)
Running make check in a VPATH configured build directory fails
in fchosttest as the test data files are searched for relative to
the current working directory.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
QEMU might support more values for "-drive discard", so using Bi-state
values (on/off) for it doesn't make sense.
"on" maps to "unmap", "off" maps to "ignore":
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
The reason for it's not exposed for such long time is that the
enums for VirtioEventIdx and CopyOnReadType have same enum values
and Correspondingstrings. This fixes the bug and adds test.
The surest way to avoid regressions is to test documented behavior :)
* tests/virstringtest.c (testStrdup): New test case.
Signed-off-by: Eric Blake <eblake@redhat.com>
If the <sysinfo> system table 'uuid' field is improperly formatted,
then qemu will fail to start the guest with the error:
virsh start dom
error: Failed to start domain dom
error: internal error process exited while connecting to monitor: Invalid SMBIOS UUID string
This was because the parsing rules were lax with respect to allowing extraneous
spaces and dashes in the provided UUID. As long as there were 32 hexavalues
that matched the UUID for the domain the string was accepted. However startup
failed because the string format wasn't correct. This patch will adjust the
string format so that when it's presented to the driver it's in the expected
format.
Added a test for uuid comparison within sysinfo.
QEMU introduced "discard" option for drive since commit a9384aff53,
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
This patch exposes the support in libvirt.
QEMU supported "discard" for "-drive" since v1.5.0-rc0:
% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1
So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
Adding a VNC WebSocket support for QEMU driver. This functionality is
in upstream qemu from commit described as v1.3.0-982-g7536ee4, so the
capability is being recognized based on QEMU version for now.
QEMU introduced command line "-mem-merge=on|off" (defaults to on) to
enable/disable the memory merge (KSM) at guest startup. This exposes
it by new XML:
<memoryBacking>
<nosharepages/>
</memoryBacking>
The XML tag is same with what we used internally for old RHEL.
Files ending in -invalid.xml are expected to violate the
XML schema check. The RBD file does not so must have a
different filename.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU command line syntax for RBD disks is
file=rbd:pool/image:opt1=val1:opt2=val2...
There is no way to escape the ':' if it appears in the
pool or image name. Thus it must be explicitly forbidden
if it occurs in the libvirt XML. People are known to
be abusing the lack of escaping in current libvirt to
pass arbitrary args to QEMU.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Clang does not like it when you pass a static variable to an
inline function
vircgroupmock.c:462:22: error: static variable 'fakesysfsdir' is
used in an inline function with external linkage [-Werror,-Wstatic-in-inline]
Just make the var non-static to avoid this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ever since the conversion to using only QMP for probing features
of qemu 1.2 and newer, we have been unable to detect features
that are added only by additional command line options. For
example, we'd like to know if '-machine mem-merge=on' (added
in qemu 1.5) is present. To do this, we will take advantage
of qemu 1.5's query-command-line-parameters QMP call [1].
This patch wires up the framework for probing the command results;
if the QMP command is missing, or if a particular command line
option does not output any parameters (for example, -net uses
a polymorphic parser, which showed up as no parameters as of qemu
1.5), we silently treat that command as having no results.
[1] https://lists.gnu.org/archive/html/qemu-devel/2013-04/msg05180.html
* src/qemu/qemu_monitor.h (qemuMonitorGetOptions)
(qemuMonitorSetOptions)
(qemuMonitorGetCommandLineOptionParameters): New functions.
* src/qemu/qemu_monitor_json.h
(qemuMonitorJSONGetCommandLineOptionParameters): Likewise.
* src/qemu/qemu_monitor.c (_qemuMonitor): Add cache field.
(qemuMonitorDispose): Clean it.
(qemuMonitorGetCommandLineOptionParameters): Implement new function.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetCommandLineOptionParameters): Likewise.
(testQemuMonitorJSONGetCommandLineParameters): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
In an upcoming patch, I need the way to safely transfer a nested
virJSON object out of its parent container for independent use,
even after the parent is freed.
* src/util/virjson.h (virJSONValueObjectRemoveKey): New function.
(_virJSONObject, _virJSONArray): Use correct type.
* src/util/virjson.c (virJSONValueObjectRemoveKey): Implement it.
* src/libvirt_private.syms (virjson.h): Export it.
* tests/jsontest.c (mymain): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
network: static route support for <network>
This patch adds the <route> subelement of <network> to define a static
route. the address and prefix (or netmask) attribute identify the
destination network, and the gateway attribute specifies the next hop
address (which must be directly reachable from the containing
<network>) which is to receive the packets destined for
"address/(prefix|netmask)".
These attributes are translated into an "ip route add" command that is
executed when the network is started. The command used is of the
following form:
ip route add <address>/<prefix> via <gateway> \
dev <virbr-bridge> proto static metric <metric>
Tests are done to validate that the input data are correct. For
example, for a static route ip definition, the address must be a
network address and not a host address. Additional checks are added
to ensure that the specified gateway is directly reachable via this
network (i.e. that the gateway IP address is in the same subnet as one
of the IP's defined for the network).
prefix='0' is supported for both family='ipv4' address='0.0.0.0'
netmask='0.0.0.0' or prefix='0', and for family='ipv6' address='::',
prefix=0', although care should be taken to not override a desired
system default route.
Anytime an attempt is made to define a static route which *exactly*
duplicates an existing static route (for example, address=::,
prefix=0, metric=1), the following error message will be sent to
syslog:
RTNETLINK answers: File exists
This can be overridden by decreasing the metric value for the route
that should be preferred, or increasing the metric for the route that
shouldn't be preferred (and is thus in place only in anticipation that
the preferred route may be removed in the future). Caution should be
used when manipulating route metrics, especially for a default route.
Note: The use of the command-line interface should be replaced by
direct use of libnl so that error conditions can be handled better. But,
that is being left as an exercise for another day.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
On RHEL 6.4 (gcc 4.4.7), I got:
fdstreamtest.c: In function 'testFDStreamReadCommon':
fdstreamtest.c:44: error: declaration of 'tmpfile' shadows a global declaration [-Wshadow]
* tests/fdstreamtest.c (testFDStreamReadCommon)
(testFDStreamWriteCommon): Rename 'tmpfile' variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
The <filesystem> element can now accept a <driver type='nbd'/>
as an alternative to 'loop'. The benefit of NBD is support
for non-raw disk image formats.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the <driver> element in filesystem devices to
allow a storage format to be set. The new attribute
uses 'format' to reflect the storage format. This is
different from the <driver> element in disk devices
which use 'type' to reflect the storage format. This
is because the 'type' attribute on filesystem devices
is already used for the driver backend, for which the
disk devices use the 'name' attribute. Arggggh.
Anyway for disks we have
<driver name="qemu" type="raw"/>
And for filesystems this change means we now have
<driver type="loop" format="raw"/>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Except the scsi host device's controller is "lsilogic", mapping
between the libvirt attributes and scsi-generic properties is:
libvirt qemu
-----------------------------------------
controller bus ($libvirt_controller.0)
bus channel
target scsi-id
unit lun
For scsi host device with "lsilogic" controller, the mapping is:
('target (libvirt)' must be 0, as it's not used; 'unit (libvirt)
must <= 7).
libvirt qemu
----------------------------------------------------------
controller && bus bus ($libvirt_controller.$libvirt_bus)
unit scsi-id
It's not good to hardcode/hard-check limits of these attributes,
and even worse, these limits are not documented, one has to find
out by either testing or reading the qemu code, I'm looking forward
to qemu expose limits like these one day). For example, exposing
"max_target", "max_lun" for megasas:
static const struct SCSIBusInfo megasas_scsi_info = {
.tcq = true,
.max_target = MFI_MAX_LD,
.max_lun = 255,
.transfer_data = megasas_xfer_complete,
.get_sg_list = megasas_get_sg_list,
.complete = megasas_command_complete,
.cancel = megasas_command_cancel,
};
Example of the qemu command line (lsilogic controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,scsi-id=8,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Example of the qemu command line (virtio-scsi controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
Adding two cap flags for scsi-generic:
QEMU_CAPS_SCSI_GENERIC
QEMU_CAPS_SCSI_GENERIC_BOOTINDEX
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
An example of the scsi hostdev XML:
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='0' unit='0'/>
</source>
<address type='drive' controller='0' bus='0' target='4' unit='8'/>
</hostdev>
Controller is implicitly added for scsi hostdev, though the scsi
controller's model defaults to "lsilogic", which might be not what
the user wants (same problem exists for virtio-scsi disk). It's
the existing problem, will be addressed later.
The device address must be specified manually. Later patch will let
libvirt generate it automatically.
This only introduces the generic XMLs for scsi hostdev, later patches
will add other elements, e.g. <readonly>, <shareable>.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
Since the NPIV machine is not easy to get, it's very likely to
introduce regressions when doing changes on the existing code.
This patch dumps part of the sysfs files (the necessary ones)
of fc_host as test input data, to test the related util functions.
It could be extended for more fc_host related testing in future.
Add a test case which exercises the virFDStreamOpenFile
and virFDStreamCreateFile methods. Ensure that both the
synchronous and non-blocking iohelper code paths work.
This validates the regression recently fixed which
broke reading in non-blocking mode
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
'make check' fails since commit 470d5c46 on any system with dash
as /bin/sh, because '<<<' is a bash extension. For example:
nwfilterschematest: 23: /home/eblake/libvirt/tests/schematestutils.sh: Syntax error: redirection unexpected
Also, there is no need to spawn a grep process when shell globbing
can do the same.
* tests/schematestutils.sh: Replace bashism and subprocess with a
faster and portable construct.
Signed-off-by: Eric Blake <eblake@redhat.com>
Older versions of libxml2 could not correctly parse certain
URIs. This causes test failures. There's nothing libvirt can
do about this, so disable the problem tests on old libxml2
versions
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Print an error instead of crashing when a TPM device without
a backend is specified.
Add a test for tpm device with no backend, which should fail
with a parse error.
https://bugzilla.redhat.com/show_bug.cgi?id=961252
Currently, using an invalid XML in tests fails, because
the schema test expects all of them to be valid.
Treat files with -invalid.xml suffix as invalid and expect
them to fail validation.
We have seen an issue on s390x platform where domain XMLs larger than 1MB
were used. The define command was finished successfully. The dumpxml command
was not successful (i.e. could not encode message payload).
Enlarged message related sizes (e.g. maximum string size, message size, etc.)
to handle larger system configurations used on s390x platform.
To improve handling of the RPC message size the allocation during encode process
is changed to a dynamic one (i.e. starting with 64kB initial size and increasing
that size in steps up to 16MB if the payload data is larger).
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
For s390 we don't want to have a default USB device generated even
if QEMU is silently tolerating -usb on the command line. This may change
in the future.
Another reason to avoid the USB controller is that it implies a PCI
bus which might cause a regression at some later point in time.
The following change will set the USB controller model to 'none'
unless a model or address has been specified, which can be the case
if a legacy definition is loaded or the XML writer knows what
she/he's doing.
Requiring the user to explicitly disable USB on systems not supporting
it seems cumbersome.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
In the past we automatically added a USB controller and assigned
it a PCI address (0:0:1.2) even on machines without a PCI bus.
This didn't break machines with no PCI bus because the command
line for it is just '-usb', with no mention of the PCI bus.
The implicit IDE controller (reserved address 0:0:1.1) has
no command line at all.
Commit b33eb0dc removed the ability to reserve PCI addresses
on machines without a PCI bus. This made them stop working,
since there would always be the implicit USB controller.
Skip the reservation of addresses for these controllers when
there is no PCI bus, instead of failing.
I remembered to document this bit, but somehow forgot to implement it.
This adds <driver name='kvm|vfio'/> as a subelement to the <forward>
element of a network (this puts it parallel to the match between
mode='hostdev' attribute in a network and type='hostdev' in an
<interface>).
Since it's already documented, only the parser, formatter, backend
driver recognition (it just translates/moves the flag into the
<interface> at the appropriate time), and a test case were needed.
(I used a separate enum for the values both because the original is
defined in domain_conf.h, which is unavailable from network_conf.h,
and because in the future it's possible that we may want to support
other non-hostdev oriented driver names in the network parser; this
makes sure that one can be expanded without the other).
If a user cgroup name begins with "cgroup.", "_" or with any of
the controllers from /proc/cgroups followed by a dot, then they
need to be prefixed with a single underscore. eg if there is
an object "cpu.service", then this would end up as "_cpu.service"
in the cgroup filesystem tree, however, "waldo.service" would
stay "waldo.service", at least as long as nobody comes up with
a cgroup controller called "waldo".
Since we require a '.XXXX' suffix on all partitions, there is
no scope for clashing with the kernel 'tasks' and 'release_agent'
files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the partition named passed in the XML does not already have
a suffix, ensure it gets a '.partition' added to each component.
The exceptions are /machine, /user and /system which do not need
to have a suffix, since they are fixed partitions at the top
level.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Recently we changed to create VM cgroups with the naming pattern
$VMNAME.$DRIVER.libvirt. Following discussions with the systemd
community it was decided that only having a single '.' in the
names is preferrable. So this changes the naming scheme to be
$VMNAME.libvirt-$DRIVER. eg for LXC 'mycontainer.libvirt-lxc' or
for KVM 'myvm.libvirt-qemu'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The device option for vfio-pci is nearly identical to that for
pci-assign - only the configfd parameter isn't supported (or needed).
Checking for presence of the bootindex parameter is done separately
from constructing the commandline, similar to how it is done for
pci-assign.
This patch contains tests to check for proper commandline
construction. It also includes tests for parser-formatter-parser
roundtrips (xml2xml), because those tests use the same data files, and
would have failed had they been included before now.
qemu: xml/args tests for VFIO hostdev and <interface type='hostdev'/>
These should be squashed in with the patch that adds commandline
handling of vfio (they would fail at any earlier time).
When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose). Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.
Add a "dry run" address allocation to figure out how many bridges
will be needed for all the devices without explicit addresses.
Auto-add just enough bridges to put all the devices on, or up to the
bridge with the largest specified index.
<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.
Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.
Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.
Assume format type is 'auto' when none is specified on
qemu command line.
Instead of making a choice between the underscore and camelCase, this
simply changes "num_queues" into "queues", which is also consistent
with Michal's multiple queue support for interface.
Improve error reporting and generating of SPICE command line arguments
according to the need to enable TLS. If TLS is disabled, there's no need
to pass the certificate dir to qemu.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=953126
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
http://www.uhv.edu/ac/newsletters/writing/grammartip2009.07.01.htm
(and several other sites) give hints that 'onto' is best used if
you can also add 'up' just before it and still make sense. In many
cases in the code base, we really want the two-word form, or even
a simplification to just 'on' or 'to'.
* docs/hacking.html.in: Use correct 'on to'.
* python/libvirt-override.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* src/util/virpci.c: Likewise.
* daemon/THREADS.txt: Use simpler 'on'.
* docs/formatdomain.html.in: Better usage.
* docs/internals/rpc.html.in: Likewise.
* src/conf/domain_event.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* tests/qemumonitortestutils.c: Likewise.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, -device xxx still doesn't work well for ppc64 platform.
It's better use legacy USB option with default for ppc64.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With this patch, include public headers in "" form is only allowed
for "internal.h". And only the external tools (examples|tools|python
|include/libvirt) can include the public headers in <> form.
The recent qemu requires "0x" prefix for the disk wwn, this patch
changes virValidateWWN to allow the prefix, and prepend "0x" if
it's not specified. E.g.
qemu-kvm: -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,\
drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,wwn=6000c60016ea71ad:
Property 'scsi-hd.wwn' doesn't take value '6000c60016ea71ad'
Though it's a qemu regression, but it's nice to allow the prefix,
and doesn't hurt for us to always output "0x".
Commit id '1acfc171' resulted in the following valgrind failure:
==25317== 136 (24 direct, 112 indirect) bytes in 1 blocks are definitely lost in loss record 4 of 4
==25317== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25317== by 0x4C6F851: virAlloc (viralloc.c:124)
==25317== by 0x4C71493: virBitmapNew (virbitmap.c:74)
==25317== by 0x4C71B79: virBitmapNewData (virbitmap.c:434)
==25317== by 0x402EF2: test8 (virbitmaptest.c:436)
==25317== by 0x40499F: virtTestRun (testutils.c:157)
==25317== by 0x402E8D: mymain (virbitmaptest.c:474)
==25317== by 0x404FDA: virtTestMain (testutils.c:719)
==25317== by 0x39D0821A04: (below main) (in /usr/lib64/libc-2.16.so)
If a cgroup controller is co-mounted with another, eg
/sys/fs/cgroup/cpu,cpuacct
Then it is a requirement that there exist symlinks at
/sys/fs/cgroup/cpu
/sys/fs/cgroup/cpuacct
pointing to the real mount point. Add support to virCgroupPtr
to detect and track these symlinks
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupNewDriver method had a 'bool privileged' param.
If a false value was ever passed in, it would simply not
work, since non-root users don't have any privileges to create
new cgroups. Just delete this broken code entirely and make
the QEMU driver skip cgroup setup in non-privileged mode
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Allow VMs to be placed into resource groups using the
following syntax
<resource>
<partition>/virtualmachines/production</partition>
</resource>
A resource cgroup will be backed by some hypervisor specific
functionality, such as cgroups with KVM/LXC.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virCgroupPtr struct contains 3 pieces of
information
- path - path of the cgroup, relative to current process'
cgroup placement
- placement - current process' placement in each controller
- mounts - mount point of each controller
When reading/writing cgroup settings, the path & placement
strings are combined to form the file path. This approach
only works if we assume all cgroups will be relative to
the current process' cgroup placement.
To allow support for managing cgroups at any place in the
heirarchy a change is needed. The 'placement' data should
reflect the absolute path to the cgroup, and the 'path'
value should no longer be used to form the paths to the
cgroup attribute files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some aspects of the cgroups setup / detection code are quite subtle
and easy to break. It would greatly benefit from unit testing, but
this is difficult because the test suite won't have privileges to
play around with cgroups. The solution is to use monkey patching
via LD_PRELOAD to override the fopen, open, mkdir, access functions
to redirect access of cgroups files to some magic stubs in the
test suite.
Using this we provide custom content for the /proc/cgroup and
/proc/self/mounts files which report a fixed cgroup setup. We
then override open/mkdir/access so that access to the cgroups
filesystem gets redirected into files in a temporary directory
tree in the test suite build dir.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On Win32 symlink() is not available, so virstoragetest.c
must be conditionalized to avoid compile failures.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
This allows a container-type domain to have exclusive access to one of
the host's NICs.
Wire <hostdev caps=net> with the lxc_controller - when moving the newly
created veth devices into a new namespace, also look for any hostdev
devices that should be moved. Note: once the container domain has been
destroyed, there is no code that moves the interfaces back to the
original namespace. This does happen, though, probably due to default
cleanup on namespace destruction.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
