Enforce that relative links are used within the page, so that local
installations don't require internet conection and/or don't redirect to
the web needlessly.
This is done by looking for any local link (barring exceptions) when
checking links with 'check-html-references.py'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that most things were migrated out of the old server which hosted
the 'libvirt.org' web (now handles only 'https://download.libvirt.org')
which no longer even hosts the cgit web interface (any link redirects to
gitlab) the whole section now is obsolete. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace full/external links which point to content within
'https://libvirt.org/' with relative links so that the web page works
fully locally.
This does not change the links in 'docs/manpages' as we want the
installed man page to work from everywhere (even when the local docs are
not installed) and the generated API docs which take links from the C
source.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a '--require-https' switch to 'check-html-references' helper script
which will error out if any non-https external link is used from our web
and use it while builidng docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The documentation about remote access to libvirt was pointing to a blog
post about usage of the 'ssh-agent' to avoid being asked for passwords.
The blog/host is now unfortunately defunct thus the link is dead.
Replace the link by the official man page of the 'ssh-agent' program.
This convenietnly removes the last non-'https' link on our web.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With the new snapshot QMP command we can select which block device
backend receives the VM state and thus the main issue with internal
snapshots with pflash was addressed.
Thus we can relax the check and allow snapshots if the pflash nvram is
on qcow2.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As explained in the commit which added the new internal snapshot
deletion code we don't want to do any form of strict checking whether
the libvirt metadata is consistent with the on-disk state as we didn't
historically do that.
In order to be able to spot the cases add a warning into the logs if
such state is encountered. While warnings are easy to miss it's the only
reasonable way to do that. Users will be encouraged to file an issue
with the information, without requiring them to enable debug logs as
the reproduction of that issue may include very old historical state.
The checker is deliberately added separately so that it can be easily
reverted once it's no longer needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Switch to using the modern QMP command.
As the user visible logic when deleting internal snapshots using the old
'delvm' command was very lax in terms of catching inconsistencies
between the snapshot metadata and on-disk state we re-implement this
behaviour even using the new command. We could improve the validation
but that'd go at the cost of possible failures which users might not
expect.
As 'delvm' was simply ignoring any kind of failure the selection of
devices to delete the snapshot from is based on querying qemu first
which top level images do have the internal snapshot and then continuing
only on those.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The usage of HMP commands are highly discouraged by qemu. Moreover,
current snapshot creation routine does not provide flexibility in
choosing target device for VM state snapshot.
This patch makes use of QMP commands snapshot-save and by
default chooses first writable non-shared qcow2 disk (if present)
as target for VM state.
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Store the names of internal snapshots present in supported images in the
data we dump from 'query-named-block-nodes' so that the upcoming changes
to the internal snapshot code can access it.
To test this we use the bitmap detection test cases which can be easily
extended to dump this data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'snapshot-save/delete' QMP commands were introduced in QEMU 6.0.0,
so we add a compatible capability to check if target QEMU binary supports it.
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The snapshot creation/deletion QMP commands use the qemu 'job' API
to signal completion thus we need to add corresponding job types.
As the job handles everything internally we don't store anything about
the job.
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Callers must handle the return value of this function as the VM might
have died. Add compiler annotation to force it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU calls the same feature differently, but translating the names in
libvirt does not make sense because the name in QEMU conflicts with
another feature. QEMU will not change the name for compatibility reasons
so we can just drop our invented name as it is not supported by QEMU.
Apart from this slightly different reason behind the feature being
unsupported by QEMU the situation is similar to vmx-ept-{uc,wb} dropped
in the previous patch and so is the implications.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although QEMU knows and enables the corresponding MSR bits, it does not
allow users to configure them (there are no names attached to them).
They should have never been added to the CPU map and definitely not to
CPU models as the features will always be considered disabled regardless
on their actual state as QEMU will not report them.
While we cannot drop them completely for backward compatibility, we can
at least remove them from all CPU models.
This is effectively no change for CPU models where the features were
marked with added='yes' because migration source would always remove the
features from domain XML so not adding them to the live XML does not
hurt. On the other side the destination could not ever be surprised by
the features being suddenly enabled as QEMU never reports them, which
means libvirt considers them disabled all the time.
GraniteRapids CPU model is the only one which contains the feature ever
since it was introduced in libvirt, but it was never possible to migrate
a domain with such CPU. The source would always mark vmx-ept-wb as
disabled and the destination without the fixes in this series would drop
the feature from the XML completely as it is unsupported by QEMU and
disabled, but when probing for the actual CPU created by QEMU libvirt
would expect the feature to be enabled (as it is included in the CPU
model and not explicitly mentioned in the domain definition) and fail
the migration. There's nothing the source could do to workaround the
behavior on the destination and migration to older libvirt will still be
broken. But it's possible to migrate a domain with GraniteRapids to a
destination with this series applied from both old and new source.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This feature is called "vmx-invept-single-context-noglobals" in QEMU and
our CPU map even contains the appropriate alias. But we failed to
actually translate the name when talking to QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The script is used to create data files for cputest from QEMU replies.
By ignoring aliases we might end up thinking a feature is not enabled by
QEMU just because its name differs from the primary one in the CPU map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
CPU features with policy='disable' which are unknown to QEMU may be
safely skipped when generating the -cpu command line, but we should
still keep them in the domain definition so that we can properly check
they are disabled after migrating the domain to a newer QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When qemuDomainMakeCPUMigratable is called with origCPU == NULL the code
just removed all vmx-* features marked as added in the specified CPU
model just like when origCPU is not NULL, but does not list any of the
vmx-* features. But this is wrong, we should not touch these features at
all when no origCPU is supplied, which happens when parsing XML passed
by a user (e.g., migration XML). Such XML is supposed to be generated by
libvirt as migration XML and contains only vmx-* features explicitly
requested by a user.
https://issues.redhat.com/browse/RHEL-52314
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It looks like linux changed the key for wait time in /proc/<pid>/sched
and /proc/<pid>/task/<tid>/sched files in commit ceeadb83aea2 (or around
that time) from se.statistics.wait_sum to just wait_sum. Similarly to
the previous change (from se.wait_sum) just look for the new name first.
Resolves: https://issues.redhat.com/browse/RHEL-60030
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
By not attempting to lock the lock file, which would fail.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is needed when migrating a guest that has persistent TPM
state: relabeling (which implies locking) needs to happen
before the swtpm process is started on the destination host,
but the lock file won't be released by the swtpm process
running on the source host before a handshake with the target
process has happened, creating a catch-22 scenario.
In order to make migration possible, make it so that locking
for lock files can be explicitly skipped. All other state
files are handled as usual.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In the case of outgoing migration, we avoid restoring the
remembered labels for the TPM state directory because doing so
would risk cutting off storage access for the target node.
Even in that case though, we should still forget (unref) the
remembered labels: if we don't, the source node will keep
thinking that the state directory is in use.
Note that this change only affects the SELinux driver because
the DAC driver doesn't currently implement label remembering
for TPM state at all.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In case when the user exports images from current host and there is an
incoming migration from a remote host, security label remembering would
be possible but would attempt to remember the label allowing access to
the image as the image is already used by a VM on remote host.
To prevent remembering the wrong label, we'll skip the remembering of
the label for any shared resource, so that the code behaves identically
regardless of how the image is accessed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In case of incoming migration where a local directory is shared to other
hosts we'll need to avoid seclabel remembering as the code would
remember the seclabel already allowing access to the image.
As the decision requires a lot of information not available in the
security driver it would either require plumbing in unpleasant callbacks
able to pass in the data or alternatively we can mark this in the
'virStorageSource' struct.
This patch chose to do the latter approach by adding a field called
'seclabelSkipRemember' which will be filled before starting the process
in cases when it will be required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When 'qemuSecurityRestoreAllLabel' is called on outgoing migration it
skips the actual relabeling part of the images in dac/selinux drivers in
order to avoid cutting off access to the image.
As shared filesystems don't really support the trusted XATTR groups,
remembering of security labels never worked on those paths so we never
actually had remembered seclabels for images that could be migrated.
With recent changes we now support migration from local storage to
remote in case the admin declares it as shared. This means that in case
when the VM is started on local storage we'd actually store seclabels,
but when migrating out the XATTRs remembering the seclabels would not
actually be unref'd and thus the seclabels would leak.
As we can't know whether a remote host will be able to use the XATTRs or
not (but really it won't) and at the same time the destination side of
migration will actually call 'qemuSecuritySetAllLabel' setting/refing
it's own seclabels we really need to unref them on our side.
This patch adds the appropriate *RecallLabel() calls on the code paths
in which relabelling is skipped due to migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reorganize the code so that the 'migrated' flag isn't checked multiple
times and thus that it's more obvious what is happening when the
'migrated' flag is asserted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Use automatic clearing for temporary variable, remove 'cleanup' label
and declare parameters according to new coding style rules.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Document the function and export it for use outside of the 'virfile'
utils module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Up until this point, we have avoided setting labels for
incoming migration when the TPM state is stored on a shared
filesystem. This seems to make sense, because since the
underlying storage is shared surely the labels will be as
well.
There's one problem, though: when a guest is migrated, the
SELinux context for the destination process is different from
the one of the source process.
We haven't hit any issues with the current approach so far
because NFS doesn't support SELinux, so effectively it doesn't
matter whether relabeling happens or not: even if the SELinux
contexts of the source and target processes are different,
both will be able to access the storage.
Now that it's possible for the local admin to manually mark
exported directories as shared filesystems, however, things
can get problematic.
Consider the case in which one host (mig-one) exports its
local filesystem /srv/nfs/libvirt/swtpm via NFS, and at the
same time bind-mounts it to /var/lib/libvirt/swtpm; another
host (mig-two) mounts the same filesystem to the same
location, this time via NFS. Additionally, in order to
allow migration in both directions, on mig-one the
/var/lib/libvirt/swtpm directory is listed in the
shared_filesystems qemu.conf option.
When migrating from mig-one to mig-two, things work just fine;
going in the opposite direction, however, results in an error:
# virsh migrate cirros qemu+ssh://mig-one/system
error: internal error: QEMU unexpectedly closed the monitor (vm='cirros'):
qemu-system-x86_64: tpm-emulator: Setting the stateblob (type 1) failed with a TPM error 0x1f
qemu-system-x86_64: error while loading state for instance 0x0 of device 'tpm-emulator'
qemu-system-x86_64: load of migration failed: Input/output error
This is because the directory on mig-one is considered a
shared filesystem and thus labeling is skipped, resulting in
a SELinux denial.
The solution is quite simple: remove the check and always
relabel. We know that it's okay to do so not just because it
makes the error seen above go away, but also because no such
check currently exists for disks and other types of persistent
storage such as NVRAM files, which always get relabeled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If the local admin has explicitly declared that a certain
filesystem is to be considered shared, we should treat it as
such.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virFileIsSharedFS() is the function that ultimately decides
whether a filesystem should be considered shared, but the list
of manually configured shared filesystems is part of the QEMU
driver's configuration, so we need to pass the information
through several layers in order to make use of it.
Note that with this change the list is propagated all the way
through, but its contents are still ignored, so the behavior
remains the same for now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As explained in the comment, this can help in scenarios where
a shared filesystem can't be detected as such by libvirt, by
giving the admin the opportunity to provide this information
manually.
https://issues.redhat.com/browse/RHEL-35752
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Provide minimal support for hotunplugging ETHERNET or BRIDGE type NICs
in the test driver.
Signed-off-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Provide minimal support for hotplugging ETHERNET or BRIDGE type NICs in
the test driver.
Signed-off-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The attribute dma_translation is only supported by intel-iommu device.
Report an error when it is used for the other iommu devices.
Fixes: 6866f958c1
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
libxlMakeVfb always succeeds regardless of if the graphics type is
actually supported or not.
libxl_defbool_val is called in libxlMakeBuildInfoVfb which besides returning
the boolean value of the defbool also has an assertion that the defbool value
is not set to default. It is possible to fail this assertion if an
unsupported graphics type is used. In libxlMakeVfb, the VNC and SDL enable
defbools are still left in their default state if the graphics type falls
outside the two, which leads to this issue.
This patch adds a check to reject graphics types outside of SDL, VNC, and SPICE
very early on in libxlMakeVfb. As a safeguard, we also initialize both vnc
enable and sdl enable defbools as false early.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, an array of libxl_string_list (char **) or in other words,
a triple char pointer is initialized. This is dereferenced to a char ** type
and stored in serial_list, which is NULL at this point. There is an attempt to
reference an element of this serial_list when making a call to
libxlMakeChrdevStr which causes a segmentation fault.
To fix this, we simply allocate an array of char * instead of
libxl_string_list.
This patch also adds testcases to extend coverage over both single serial and
multiple serial cases.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Expose the new parameter as '--migrate-disks-detect-zeroes' option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new 'VIR_MIGRATE_PARAM_MIGRATE_DISKS_DETECT_ZEROES' migration
parameter allows users of migration to pass in a list of disks where
zero-detection (which avoids transferring the zeroed-blocks) should be
enabled for the migration connection. This comes at the cost of extra
CPU cycles needed to check each block if it's all-zero.
This is useful for storage backends where information about the
allocation state of a block is not available and thus without this the
image would become fully allocated on the destination.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
