virDomainConfNWFilterInstantiate() was called without updated
net->ifname, it caused in some cases throwing error message. If
function failed, change is reverted.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/658
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Function qemuNamespaceMknodOne() is trying to replicate a file from the
parent namespace as perfectly as possible, with the same permissions,
labels, ACLs, etc.
If that file already existed it means that the qemu process is probably
using it already and the current setting is probably more correct than
the ones from the parent namespace.
In order to reflect that only replicate the file metadata when it was
(re-)created in this function.
Resolves: https://issues.redhat.com/browse/RHEL-62174
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Function qemuNamespaceMknodOne() is supposed to return 0 if the file did
not exist before this function. If, however, the file existed, but was
removed and recreated by this function the @existed flag should be reset
to its proper state (false) because the function then behaves the same
way as if the file did not exist as it needed to be recreated.
So reset the @existed flag to properly reflect what happened.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The boolean actually tells whether the file existed when the function
was called and using it in more places later on makes them
confusing (e.g. do something with a file if it does not exist). To
better reflect the above and prepare for next patch rename this
variable.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce capabilities based on qemu commit 'v9.1.0-803-g05adb38839'.
Notable changes:
- new 9.2 machine types
- 'gluster' disk backend deprecated
- 'reconnect' option of chardevs replaced by 'reconnect-ms'
- this includes test output changes happening in this patch
as 'reconnect' was deprecated in the same patch that
introduced 'reconnect-ms' and thus couldn't be changed
incrementally
- cpu flags:
- 'ibpb-brtype' added
- 'vmx-exit-secondary-ctls' added
- 'vmx-entry-load-rtit-ctl' added
- migration capabilities/parameters
- 'zero-blocks' deprecated
- 'multifd-qatzip-level' added
- 'pty' chardev backend gained 'path' attribute
- 'cris' and 'she4b' arches removed (from 'query-cpus-fast' data)
- 'copy-before-write' block filter gained 'min-cluster-size'
- 'vhost-user-scmi', 'serial-mm' removed
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Upcoming qemu-9.2 will deprecate 'reconnect' in favor of 'reconnect-ms'.
Add pinned versions so that we test also the old syntax.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemu-9.2 will deprecate the 'reconnect' field in favor of
'reconnect-ms'. As libvirt currently doesn't track the timeouts in
milliseconds we simply convert them to avoid use of the deprecated
field.
Quite a lot of churn is caused by the need to plumb 'qemuCaps' into the
chardev props generator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
New qemu introduced the 'reconnect-ms' field for character devices
allowing the reconnect timeout to be specified in milliseconds, which
also deprecates the existing 'reconnect' field that libvirt uses.
To avoid use of deprecated interfaces add a capability which will allow
us to use the new field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The gluster protocol will be deprecated by qemu-9.2. Convert the tests
to NBD as it's trivial and the test cases are not concerned with a
specific protocol.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Convert one of the layers of the backing chain to 'nfs' to test if users
don't set the identity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The gluster protocol backend will be deprecated as of qemu-9.2. Allow
it for now in the QMP schema validator and mark them to be dropped once
gluster is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The gluster protocol backend will be deprecated as of qemu-9.2. Allow it
for now in the QMP schema validator and mark them to be dropped once
gluster is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Gluster will be deprecated in the upcoming qemu version thus we need to
replace the network protocol by something which will stay supported so
that we can keep the tests around.
Convert all cases referencing 'gluster' to 'nbd'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In Debian 12, the qemu-system-i386 binary in /usr/bin is a wrapper
script, with the actual executable living in /usr/libexec instead.
This makes it impossible to run i686 VMs when AppArmor is enabled.
Allow running the actual binary.
https://bugs.debian.org/1030926
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
'qemuSnapshotDeleteBlockJobIsRunning' returns only 0 and 1. Convert it
to bool and remove the dead code handling -1 return in the caller.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/682
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The migration parameter causes zero detection to be enabled and zero
blocks are *not* transferred to the destination. This means that users
must provide pre-cleared images that read all zero, otherwise the
non-zero blocks on destination which reside in places where the source
has zero blocks would be kept intact corrupting the image.
As not transferring and overwriting the zero blocks is what the feature
is supposed to do the users need to provide the proper environment.
Document the requirement, both in API and in the virsh man page for the
'--migrate-disks-detect-zeroes' option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The idea of migration with VIR_MIGRATE_PARAM_MIGRATE_DISKS_DETECT_ZEROES
populated is to sparsify the image. The QEMU NBD client as it was
configured in commit 621f879adf would
signal to the destination to do thick allocation of holes which would
result in a non-sparse image for any backend except a qcow2 image which
I used to test it.
Switch to VIR_DOMAIN_DISK_DETECT_ZEROES_UNMAP and
VIR_DOMAIN_DISK_DISCARD_UNMAP which tells the NBD client (and that in
turn the NBD server) to preserve the sparse blocks it detected from the
image.
Fixes: 621f879adf
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
major() is a macro defined in sys/sysmacros.h so luckily the code works,
but it's very confusing. Let's rename the local variable to make the
difference between it and the macro more obvious. And while touching the
line we can also initialize it to make sure "clever" analyzers do not
think it may be used uninitialized.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
With watchdog action=dump the actual watchdog action is set to pause and
the daemon then proceeds to dump the process. After that the domain is
resumed. That was the case since the feature was added. However the
resuming of the domain might be unexpected, especially when compared to
HW watchdog, which will never run the guest from the point where it got
interrupted.
Document the pre-existing behaviour, since any change might be
unexpected as well. Change of behaviour would require new options like
dump+reset, dump+pause, etc. That option is still possible, but
orthogonal to this change.
Resolves: https://issues.redhat.com/browse/RHEL-753
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When the daemons were split out from the monolithic libvirtd, the
network driver didn't implement "inhibit idle timeout if there are any
active objects" as was done for other drivers, so virtnetworkd would
always exit after 120 seconds of no incoming connections. This didn't
every cause any visible problem, although it did mean that anytime a
network API was called after an idle time > 120 seconds, that the
restarting virtnetworkd would flush and reload all the
iptables/nftables rules for any active networks.
This patch replicates what is done in the QEMU driver - an nactive is
added to the network driver object, along with an inhibitCallback; the
latter is passed into networkStateInitialize when the driver is
loaded, and the former is incremented for each already-active network,
then incremented/decremented each time a network is started or
stopped. If nactive transitions from 0 to 1 or 1 to 0, inhibitCallback
is called, and it "does the right stuff" to prevent/enable the idle
timeout.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The Xen libxl driver does not support nwfilter. Introduce a
deviceValidateCallback function with a check for nwfilters, returning
VIR_ERR_CONFIG_UNSUPPORTED if any are found. Also fail to start any
existing VMs referencing nwfilters.
Drivers generally ignore unrecognized XML configuration, but ignoring
a user's request to filter VM network traffic can be viewed as a
security issue.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
(this is a remake of commit v10.7.0-78-g200f60b2e1, which was reverted
due to a regression in another patch it was dependent on. The new
implementation just adds the call to virFirewallDInterfaceUnsetZone()
into the existing networkRemoveFirewallRules() (but only if we had set
a zone when the network was first started).
Replaces: 200f60b2e1
Resolves: https://issues.redhat.com/browse/RHEL-61576
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that networkAddFirewallRules and networkRemoveFirewallRules() are
being called for mode='open' networks, we just need to move the code
that sets the zone outside of the if (mode != ...OPEN) clause, so that
it's done for all forward modes, with the exception of setting the
implied 'libvirt*' zones, which are set when no zone is specified for
all forward modes *except* 'open'.
This was previously done in commit v10.7.0-76-g1a72b83d56, but in a
manner that caused the zone to be unset whenever firewalld reloaded
its rules. That patch was reverted, and this new better patch takes
its place.
Replaces: 1a72b83d56
Resolves: https://issues.redhat.com/browse/RHEL-61576
Re-Resolves: https://gitlab.com/libvirt/libvirt/-/issues/215
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Previously networkAddFirewallRules() and networkRemoveFirewallRules()
were only called if the forward mode was none, 'route', or 'nat', so
those functions didn't check the forward mode. Although their current
contents shouldn't be executed for forward mode='open', soon they will
have extra functionality that should be executed for all the current
forward modes and also mode='open'.
This patch modifies all places either of the functions are called to
make sure they are called for mode='open' in addition to current modes
(by either adding 'case ..._OPEN:' to the case of a switch statement,
or just removing an 'if (mode != ...OPEN)' around the calls; to
balance out for that, it puts the entirety of the contents of both
functions inside if (mode != ...OPEN) to retain current behavior. (an
upcoming patch will add code outside that if clause).
debug log messages were also added to make it easier to test that the
right thing is being done in all cases.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This reverts commit 1a72b83d56. That
patch had made the incorrect assumption that the firewalld zone of a
bridge would not be changed/removed when firewalld reloaded its rules
(e.g. with "killall -HUP firewalld"). It turns out my memory was
faulty, and this *does* remove the bridge interface's zone, which
results in guest networking failure after a firewalld reload, until
the virtual network is restarted.
The functionality reverted as a result of this patch reversion will be
added back in an upcoming patch that keeps the zone setting in
networkAddFirewallRules() (rather than moving it into a separate
function) so that it is called every time the network's firewall rules
are reloaded (including the reload that happens in response to a
reload notification from firewalld).
Signed-off-by: Laine Stump
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This reverts commit 200f60b2e1. The same
functionality will be re-added in a different way in an upcoming patch.
Signed-off-by: Laine Stump
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The image format setting in qemu.conf is named 'save_image_format'. The
enum of supported format types is declared with name 'virQEMUSaveFormat'.
Let's be consistent and use 'format' instead of 'compressed' when referring
to the save image format.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The current description of the various foo_image_format settings can
be construded to imply the setting is only used to control compression
of the image. Improve the documentation to clarify that format describes
the representation of guest memory blocks on disk, which includes
compression among other possible layouts.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Enforce that relative links are used within the page, so that local
installations don't require internet conection and/or don't redirect to
the web needlessly.
This is done by looking for any local link (barring exceptions) when
checking links with 'check-html-references.py'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that most things were migrated out of the old server which hosted
the 'libvirt.org' web (now handles only 'https://download.libvirt.org')
which no longer even hosts the cgit web interface (any link redirects to
gitlab) the whole section now is obsolete. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace full/external links which point to content within
'https://libvirt.org/' with relative links so that the web page works
fully locally.
This does not change the links in 'docs/manpages' as we want the
installed man page to work from everywhere (even when the local docs are
not installed) and the generated API docs which take links from the C
source.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a '--require-https' switch to 'check-html-references' helper script
which will error out if any non-https external link is used from our web
and use it while builidng docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The documentation about remote access to libvirt was pointing to a blog
post about usage of the 'ssh-agent' to avoid being asked for passwords.
The blog/host is now unfortunately defunct thus the link is dead.
Replace the link by the official man page of the 'ssh-agent' program.
This convenietnly removes the last non-'https' link on our web.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With the new snapshot QMP command we can select which block device
backend receives the VM state and thus the main issue with internal
snapshots with pflash was addressed.
Thus we can relax the check and allow snapshots if the pflash nvram is
on qcow2.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As explained in the commit which added the new internal snapshot
deletion code we don't want to do any form of strict checking whether
the libvirt metadata is consistent with the on-disk state as we didn't
historically do that.
In order to be able to spot the cases add a warning into the logs if
such state is encountered. While warnings are easy to miss it's the only
reasonable way to do that. Users will be encouraged to file an issue
with the information, without requiring them to enable debug logs as
the reproduction of that issue may include very old historical state.
The checker is deliberately added separately so that it can be easily
reverted once it's no longer needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Switch to using the modern QMP command.
As the user visible logic when deleting internal snapshots using the old
'delvm' command was very lax in terms of catching inconsistencies
between the snapshot metadata and on-disk state we re-implement this
behaviour even using the new command. We could improve the validation
but that'd go at the cost of possible failures which users might not
expect.
As 'delvm' was simply ignoring any kind of failure the selection of
devices to delete the snapshot from is based on querying qemu first
which top level images do have the internal snapshot and then continuing
only on those.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The usage of HMP commands are highly discouraged by qemu. Moreover,
current snapshot creation routine does not provide flexibility in
choosing target device for VM state snapshot.
This patch makes use of QMP commands snapshot-save and by
default chooses first writable non-shared qcow2 disk (if present)
as target for VM state.
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Store the names of internal snapshots present in supported images in the
data we dump from 'query-named-block-nodes' so that the upcoming changes
to the internal snapshot code can access it.
To test this we use the bitmap detection test cases which can be easily
extended to dump this data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'snapshot-save/delete' QMP commands were introduced in QEMU 6.0.0,
so we add a compatible capability to check if target QEMU binary supports it.
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
