Replacing the strchr call with two variables through a strstr call.
Calling strchr with two variables triggers a gcc 4.3/4.4
bug when used in combination with -Wlogical-op and at least -O1.
The ifaceSetMac and ifaceGetMac APIs duplicate the functionality
of the virNetDevSetMAC and virNetDevGetMAC APIs, but returning
errno's instead of raising errors.
* src/util/interface.c, src/util/interface.h: Remove
ifaceSetMac and ifaceGetMac APIs, adjusting callers
for new error behaviour
The ifaceUp, ifaceDown, ifaceCtrl & ifaceIsUp APIs can be replaced
with calls to virNetDevSetOnline and virNetDevIsOnline
* src/util/interface.c, src/util/interface.h: Delete ifaceUp,
ifaceDown, ifaceCtrl & ifaceIsUp
* src/nwfilter/nwfilter_gentech_driver.c, src/util/macvtap.c:
Update to use virNetDevSetOnline and virNetDevIsOnline
Move the virNetDevSetName and virNetDevSetNamespace APIs out
of LXC's veth.c and into virnetdev.c.
Move the remaining content of the file to src/util/virnetdevveth.c
* src/lxc/veth.c: Rename to src/util/virnetdevveth.c
* src/lxc/veth.h: Rename to src/util/virnetdevveth.h
* src/util/virnetdev.c, src/util/virnetdev.h: Add
virNetDevSetName and virNetDevSetNamespace
* src/lxc/lxc_container.c, src/lxc/lxc_controller.c,
src/lxc/lxc_driver.c: Update include paths
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines
- src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
- src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
- src/util/virsocketaddr.c: virSocketAddr and APIs
- src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
for virNetDevBandwidth
- src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
for virNetDevVPortProfile
* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
src/conf/domain_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/conf/nwfilter_conf.h,
src/esx/esx_util.h, src/network/bridge_driver.c,
src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
src/util/virnetdev.h, src/util/virnetdevtap.c,
tools/virsh.c: Update include files
The virtual port profile parsing/formatting APIs do not
correctly handle unknown profile type strings/numbers.
They behave as a no-op, instead of raising an error
* src/util/network.c, src/util/network.h: Fix error
handling of port profile APIs
* src/conf/domain_conf.c, src/conf/network_conf.c: Update
for API changes
Rename the virVirtualPortProfileParams struct to be
virNetDevVPortProfile, and rename the APIs to match
this prefix.
* src/util/network.c, src/util/network.h: Rename port profile
APIs
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/network_conf.c, src/conf/network_conf.h,
src/network/bridge_driver.c, src/qemu/qemu_hotplug.c,
src/util/macvtap.c, src/util/macvtap.h: Update for
renamed APIs/structs
This allows strings to be transported between client and server
in the context of name-type-value virTypedParameter functions.
For compatibility,
o new clients will not send strings to old servers, based on
a feature check
o new servers will not send strings to old clients without the
flag VIR_TYPED_PARAM_STRING_OKAY; this will be enforced at
the RPC layer in the next patch, so that drivers need not
worry about it in general. The one exception is that
virDomainGetSchedulerParameters lacks a flags argument, so
it must not return a string; drivers that forward that
function on to virDomainGetSchedulerParametersFlags will
have to pay attention to the flag.
o the flag VIR_TYPED_PARAM_STRING_OKAY is set automatically,
based on a feature check (so far, no driver implements it),
so clients do not have to worry about it
Future patches can then enable the feature on a per-driver basis.
This patch also ensures that drivers can blindly strdup() field
names (previously, a malicious client could stuff 80 non-NUL bytes
into field and cause a read overrun).
* src/libvirt_internal.h (VIR_DRV_FEATURE_TYPED_PARAM_STRING): New
driver feature.
* src/libvirt.c (virTypedParameterValidateSet)
(virTypedParameterSanitizeGet): New helper functions.
(virDomainSetMemoryParameters, virDomainSetBlkioParameters)
(virDomainSetSchedulerParameters)
(virDomainSetSchedulerParametersFlags)
(virDomainGetMemoryParameters, virDomainGetBlkioParameters)
(virDomainGetSchedulerParameters)
(virDomainGetSchedulerParametersFlags, virDomainBlockStatsFlags):
Use them.
* src/util/util.h (virTypedParameterArrayClear): New helper
function.
* src/util/util.c (virTypedParameterArrayClear): Implement it.
* src/libvirt_private.syms (util.h): Export it.
Based on an initial patch by Hu Tao, with feedback from
Daniel P. Berrange.
Signed-off-by: Eric Blake <eblake@redhat.com>
The socket address APIs in src/util/network.h either take the
form virSocketAddrXXX, virSocketXXX or virSocketXXXAddr.
Sanitize this so everything is virSocketAddrXXXX, and ensure
that the virSocketAddr parameter is always the first one.
* src/util/network.c, src/util/network.h: Santize socket
address API naming
* src/conf/domain_conf.c, src/conf/network_conf.c,
src/conf/nwfilter_conf.c, src/network/bridge_driver.c,
src/nwfilter/nwfilter_ebiptables_driver.c,
src/nwfilter/nwfilter_learnipaddr.c,
src/qemu/qemu_command.c, src/rpc/virnetsocket.c,
src/util/dnsmasq.c, src/util/iptables.c,
src/util/virnetdev.c, src/vbox/vbox_tmpl.c: Update for
API renaming
Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces
* src/util/virnetdev.c: APIs for any type of network interface
* src/util/virnetdevbridge.c: APIs for bridge interfaces
* src/util/virnetdevtap.c: APIs for TAP interfaces
* src/util/virnetdev.c, src/util/virnetdev.h,
src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
src/uml/uml_driver.c: Update #include directives
Convert the virNetDevBridgeSetSTP and virNetDevBridgeSetSTPDelay
to use ioctls instead of spawning brctl.
Implement the virNetDevBridgeGetSTP and virNetDevBridgeGetSTPDelay
methods which were declared in the header but never existed
* src/util/bridge.c: Convert to use bridge ioctls instead of brctl
The MTU management APIs are useful to other code inside libvirt,
so should be exposed as non-static APIs.
* src/util/bridge.c, src/util/bridge.h: Expose virNetDevSetMTU,
virNetDevSetMTUFromDevice & virNetDevGetMTU
The existing brXXX APIs in src/util/bridge.h are renamed to
follow one of three different conventions
- virNetDevXXX - operations for any type of interface
- virNetDevBridgeXXX - operations for bridge interfaces
- virNetDevTapXXX - operations for tap interfaces
* src/util/bridge.h, src/util/bridge.c: Rename all APIs
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Update for API renaming
Currently every caller of the brXXX APIs has to store the returned
errno value and then raise an error message. This results in
inconsistent error messages across drivers, additional burden on
the callers and makes the error reporting inaccurate since it is
hard to distinguish different scenarios from 1 errno value.
* src/util/bridge.c: Raise errors instead of returning errnos
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Remove error reporting code
The bridge management APIs in src/util/bridge.c require a brControl
object to be passed around. This holds the file descriptor for the
control socket. This extra object complicates use of the API for
only a minor efficiency gain, which is in turn entirely offset by
the need to fork/exec the brctl command for STP configuration.
This patch removes the 'brControl' object entirely, instead opening
the control socket & closing it again within the scope of each method.
The parameter names for the APIs are also made to consistently use
'brname' for bridge device name, and 'ifname' for an interface
device name. Finally annotations are added for non-NULL parameters
and return check validation
* src/util/bridge.c, src/util/bridge.h: Remove brControl object
and update API parameter names & annotations.
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/uml/uml_conf.h, src/uml/uml_conf.c, src/uml/uml_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_conf.h,
src/qemu/qemu_driver.c: Remove reference to 'brControl' object
MacOS lacks ptsname_r, and gnulib doesn't (yet) provide it.
But we can avoid it altogether, by using gnulib openpty()
instead. Note that we do _not_ want the pt_chown module;
gnulib uses it only to implement a replacement openpty() if
the system lacks both openpty() and granpt(), but all
systems that we currently port to either have at least one of
openpty() and/or grantpt(), or lack ptys altogether. That is,
we aren't porting to any system that requires us to deal with
the hassle of installing a setuid pt_chown helper just to use
gnulib's ability to provide openpty() on obscure platforms.
* .gnulib: Update to latest, for openpty fixes
* bootstrap.conf (gnulib_modules): Add openpty, ttyname_r.
(gnulib_tool_option_extras): Exclude pt_chown module.
* src/util/util.c (virFileOpenTty): Rewrite in terms of openpty
and ttyname_r.
* src/util/util.h (virFileOpenTtyAt): Delete dead prototype.
Building on 64-bit FreeBSD 8.2 complained about a cast between
a pointer and a smaller integer. Going through an intermediate
cast shuts up the compiler.
* src/util/threads-pthread.c (virThreadSelfID): Silence a warning.
The field 'mon' in 'struct tm' gives months 0-11, where as
humans tend to expect months 1-12. Thus the month number
needing adjusting by 1
* src/util/logging.c: Use human friendly month number
commit 27908453 introduces a regression, and it will
cause libvirt crashed when starting network.
The reason is that tapfd may be NULL, but we dereference
it without checking whether it is NULL.
To support "managed" mode of host PCI device, we record the original
states (unbind_from_stub, remove_slot, and reprobe) so that could
reattach the device to host with original driver. But there is no XML
for theses attrs, and thus after daemon is restarted, we lose the
original states. It's easy to reproduce:
1) virsh start domain
2) virsh attach-device dom hostpci.xml (in 'managed' mode)
3) service libvirtd restart
4) virsh destroy domain
You will see the device won't be bound to the original driver
if there was one.
This patch is to solve the problem by introducing internal XML
(won't be dumped to user, only dumped to status XML). The XML is:
<origstates>
<unbind/>
<remove_slot/>
<reprobe/>
</origstates>
Which will be child node of <hostdev><source>...</souce></hostdev>.
(only for PCI device).
A new struct "virDomainHostdevOrigStates" is introduced for the XML,
and the according members are updated when preparing the PCI device.
And function "qemuUpdateActivePciHostdevs" is modified to honor
the original states. Use of qemuGetPciHostDeviceList is removed
in function "qemuUpdateActivePciHostdevs", and the "managed" value of
the device config is honored by the change. This fixes another problem
alongside:
qemuGetPciHostDeviceList set the device as "managed" force
regardless of whether the device is configured as "managed='yes'"
or not in XML, which is not right.
- changed some return 1's to return -1
- changed if (rc) error checks to if (rc < 0)
- fixed some other minor convention violations
I might have missed some. Can fix in another patch or can respin
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Reported-by: Eric Blake <eblake@redhat.com>
Reported-by: Laine Stump <laine@laine.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
This refactors the TAP creation code out of brAddTap into a new
function brCreateTap to allow it to be used on its own. I have also
changed ifSetInterfaceMac to brSetInterfaceMac and exported it since
it is will be needed by code outside of util/bridge.c in the next
patch.
AUTHORS | 1 +
src/libvirt_bridge.syms | 2 +
src/util/bridge.c | 116 +++++++++++++++++++++++++++++++----------------
src/util/bridge.h | 9 ++++
4 files changed, 89 insertions(+), 39 deletions(-)
Every time we write XML into a file we call virEmitXMLWarning to write a
warning that the file is automatically generated. virXMLSaveFile
simplifies this into a single step and makes rewriting existing XML file
safe by using virFileRewrite internally.
When saving config files we just overwrite old content of the file. In
case something fails during that process (e.g. disk gets full) we lose
both old and new content. This patch makes the process more robust by
writing the new content into a separate file and only if that succeeds
the original file is atomically replaced with the new one.
More simplifications possible due to auto-indent. Also,
<bandwidth> within <actual> was only using 6 instead of 8 spaces.
* src/util/network.h (virVirtualPortProfileFormat)
(virBandwidthDefFormat): Alter signature.
* src/util/network.c (virVirtualPortProfileFormat)
(virBandwidthDefFormat): Alter indentation.
(virBandwidthChildDefFormat): Tweak to make use easier.
* src/conf/network_conf.c (virPortGroupDefFormat)
(virNetworkDefFormat): Adjust callers.
* src/conf/domain_conf.c (virDomainNetDefFormat): Likewise.
(virDomainActualNetDefFormat): Likewise, and fix bandwidth
indentation.
The improvements to virBuffer, along with a paradigm shift to pass
the original buffer through rather than creating a second buffer,
allow us to shave off quite a few lines of code.
* src/util/sysinfo.h (virSysinfoFormat): Alter signature.
* src/util/sysinfo.c (virSysinfoFormat, virSysinfoBIOSFormat)
(virSysinfoSystemFormat, virSysinfoProcessorFormat)
(virSysinfoMemoryFormat): Change indentation parameter.
* src/conf/domain_conf.c (virDomainSysinfoDefFormat): Adjust
caller.
* src/qemu/qemu_driver.c (qemuGetSysinfo): Likewise.
Rather than having to adjust all callers in a chain to deal with
indentation, it is nicer to have virBuffer do auto-indentation.
* src/util/buf.h (_virBuffer): Increase size.
(virBufferAdjustIndent, virBufferGetIndent): New prototypes.
* src/libvirt_private.syms (buf.h): Export new functions.
* src/util/buf.c (virBufferAdjustIndent, virBufferGetIndent): New
functions.
(virBufferSetError, virBufferAdd, virBufferAddChar)
(virBufferVasprintf, virBufferStrcat, virBufferURIEncodeString):
Implement auto-indentation.
* tests/virbuftest.c (testBufAutoIndent): Test it.
(testBufInfiniteLoop): Don't rely on internals.
Idea by Daniel P. Berrange.
The next patch wants to add some sanity checking, which would
be a different error than ENOMEM. Many existing callers blindly
report OOM failure if virBuf reports an error, and this will be
wrong in the (unlikely) case that they actually had a usage error
instead; but since the most common error really is ENOMEM, I'm
not going to fix all callers. Meanwhile, new discriminating
callers can react differently depending on what failure happened.
* src/util/buf.c (virBufferSetError): Add parameter.
(virBufferGrow, virBufferVasprintf, virBufferEscapeString)
(virBufferEscapeSexpr, virBufferEscapeShell): Adjust callers.
Although the compiler wasn't complaining (since it was the pointer,
rather than what was being pointed to, that was actually const), it
looks quite suspicious to call a function with an argument labeled
const when the nature of the pointer (virBufferPtr) is hidden behind
a typedef. Dropping const makes the function declarations easier
to read.
* src/util/buf.h: Drop const from all functions that modify buffer
argument.
* src/util/buf.c (virBufferSetError, virBufferAdd)
(virBufferContentAndReset, virBufferFreeAndReset)
(virBufferAsprintf, virBufferVasprintf, virBufferEscapeString)
(virBufferEscapeSexpr, virBufferEscape): Fix fallout.
The glibc ones (intentionally) cannot handle ptys opened in a
devpts not mounted at /dev/pts.
Drop the (un-exported, unused) virFileOpenTtyAt.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds support for a libvirt client configuration file
either /etc/libvirt/libvirt.conf for privileged clients,
or $HOME/.libvirt/libvirt.conf for unprivileged clients.
It allows one parameter
uri_aliases = [
"hail=qemu+ssh://root@hail.cloud.example.com/system",
"sleet=qemu+ssh://root@sleet.cloud.example.com/system",
]
Any call to virConnectOpen with a non-NULL URI will first
attempt to match against the uri_aliases list. An application
can disable this by using VIR_CONNECT_NO_ALIASES
* docs/uri.html.in: Document URI aliases
* include/libvirt/libvirt.h.in: Add VIR_CONNECT_NO_ALIASES
* libvirt.spec.in, mingw32-libvirt.spec.in: Add /etc/libvirt/libvirt.conf
* src/Makefile.am: Install default config file
* src/libvirt.c: Add support for URI aliases
* src/remote/remote_driver.c: Don't try to handle URIs
with no scheme and which clearly are not paths
* src/util/conf.c: Don't raise error on virConfFree(NULL)
* src/xen/xen_driver.c: Don't raise error on URIs
with no scheme
Commit 0472f39 plugged a leak, but introduced another bug:
Actually looks like physfndev is conditionally allocated in getPhysfnDev
Its better to modify getPhysfnDev to allocate physfndev every time.
When failing on starting a domain, it tries to reattach all the PCI
devices defined in the domain conf, regardless of whether the devices
are still used by other domain. This will cause the devices to be deleted
from the list qemu_driver->activePciHostdevs, thus the devices will be
thought as usable even if it's not true. And following commands
nodedev-{reattach,reset} will be successful.
How to reproduce:
1) Define two domains with same PCI device defined in the confs.
2) # virsh start domain1
3) # virsh start domain2
4) # virsh nodedev-reattach $pci_device
You will see the device will be reattached to host successfully.
As pciDeviceReattach just check if the device is still used by
other domain via checking if the device is in list driver->activePciHostdevs,
however, the device is deleted from the list by step 2).
This patch is to prohibit the bug by:
1) Prohibit a domain starting or device attachment right at
preparation period (qemuPrepareHostdevPCIDevices) if the
device is in list driver->activePciHostdevs, which means
it's used by other domain.
2) Introduces a new field for struct _pciDevice, (const char *used_by),
it will be set as the domain name at preparation period,
(qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting
the device from driver->activePciHostdevs if it's still used by
other domain when stopping the domain process.
* src/pci.h (define two internal functions, pciDeviceSetUsedBy and
pciDevceGetUsedBy)
* src/pci.c (new field "const char *used_by" for struct _pciDevice,
implementations for the two new functions)
* src/libvirt_private.syms (Add the two new internal functions)
* src/qemu_hostdev.h (Modify the definition of functions
qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices)
* src/qemu_hostdev.c (Prohibit preparation and don't delete the
device from activePciHostdevs list if it's still used by other domain)
* src/qemu_hotplug.c (Update function usage, as the definitions are
changed)
Signed-off-by: Eric Blake <eblake@redhat.com>
Setting a hostname that cannot be resolved is not the best configuration
but since virGetHostname only calls getaddrinfo to get host's canonical
name and we do not fail if the returned canonical name is NULL or
"localhost", there is no reason why we should fail if getaddrinfo itself
fails.
Coverity complained that most, but not all, clients of virUUIDParse
were checking for errors. Silence those coverity warnings by
explicitly marking the cases where we trust the input, and fixing
one instance that really should have been checking. In particular,
this silences a rather large percentage of the warnings I saw on my
most recent Coverity analysis run.
* src/util/uuid.h (virUUIDParse): Enforce rules.
* src/util/uuid.c (virUUIDParse): Drop impossible check; at least
Coverity will detect if we break rules and pass NULL.
* src/xenapi/xenapi_driver.c (xenapiDomainCreateXML)
(xenapiDomainLookupByID, xenapiDomainLookupByName)
(xenapiDomainDefineXML): Ignore return when we trust data source.
* src/vbox/vbox_tmpl.c (nsIDtoChar, vboxIIDToUUID_v3_x)
(vboxCallbackOnMachineStateChange)
(vboxCallbackOnMachineRegistered, vboxStoragePoolLookupByName):
Likewise.
* src/node_device/node_device_hal.c (gather_system_cap): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr): Check for errors.
virCommandTransferFD promises that the fd is no longer owned by
the caller. Normally, we want the fd to remain open until the
child runs, but in error situations, we must close it earlier.
* src/util/command.c (virCommandTransferFD): Close fd now if we
can't track it to close later.
(virCommandKeepFD): Adjust helper to make this easier.
Implement a generic helper to escape a given set of characters with a
leading '\'. Generalizes virBufferEscapeSexpr().
Signed-off-by: Sage Weil <sage@newdream.net>
The libvirtd daemon had a few crude system tap probes. Some of
these were broken during the RPC rewrite. The new modular RPC
code is structured in a way that allows much more effective
tracing. Instead of trying to hook up the original probes,
define a new set of probes for the RPC and event code.
The master probes file is now src/probes.d. This contains
probes for virNetServerClientPtr, virNetClientPtr, virSocketPtr
virNetTLSContextPtr and virNetTLSSessionPtr modules. Also add
probes for the poll event loop.
The src/dtrace2systemtap.pl script can convert the probes.d
file into a libvirt_probes.stp file to make use from systemtap
much simpler.
The src/rpc/gensystemtap.pl script can generate a set of
systemtap functions for translating RPC enum values into
printable strings. This works for all RPC header enums (program,
type, status, procedure) and also the authentication enum
The PROBE macro will automatically generate a VIR_DEBUG
statement, so any place with a PROBE can remove any existing
manual DEBUG statements.
* daemon/libvirtd.stp, daemon/probes.d: Remove obsolete probing
* daemon/libvirtd.h: Remove probe macros
* daemon/Makefile.am: Remove all probe buildings/install
* daemon/remote.c: Update authentication probes
* src/dtrace2systemtap.pl, src/rpc/gensystemtap.pl: Scripts
to generate STP files
* src/internal.h: Add probe macros
* src/probes.d: Master list of probes
* src/rpc/virnetclient.c, src/rpc/virnetserverclient.c,
src/rpc/virnetsocket.c, src/rpc/virnettlscontext.c,
src/util/event_poll.c: Insert probe points, removing any
DEBUG statements that duplicate the info
Although reverting to a snapshot is a form of data loss, this is
normally expected. However, there are two cases where additional
surprises (failure to run the reverted state, or a break in
connectivity to the domain) can come into play. Requiring extra
acknowledgment in these cases will make it less likely that
someone can get into an unrecoverable state due to a default revert.
Also create a new error code, so users can distinguish when forcing
would make a difference, rather than having to blindly request force.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_REVERT_FORCE):
New flag.
* src/libvirt.c (virDomainRevertToSnapshot): Document it.
* include/libvirt/virterror.h (VIR_ERR_SNAPSHOT_REVERT_RISKY): New
error value.
* src/util/virterror.c (virErrorMsg): Implement it.
* tools/virsh.c (cmdDomainSnapshotRevert): Add --force to virsh.
* tools/virsh.pod (snapshot-revert): Document it.
Although we were initializing worker threads during pool creating,
we missed this during virThreadPoolSendJob. This bug led to segmenation
fault as worker thread free() given argument.
This patch adds functions to compare structures containing network
device configuration for equality. They serve for the purpose of
disallowing unsupported changes to live network devices.
This patch modifies error handling function for the XML parser provided
by libxml2.
Originaly only a line number and error message were logged. With this
new error handler function, the user is provided with a more complex
description of the parsing error.
Context of the error is printed in libXML2 style and filename of the
file, that caused the error is printed. Example of an parse error:
13:41:36.262: 16032: error : catchXMLError:706 :
/etc/libvirt/qemu/rh_bad.xml:58: Opening and ending tag mismatch: name
line 2 and domain
</domain>
---------^
Context of the error gives the user hints that may help to quickly
locate a corrupt xml file.
fixes BZs:
----------
Bug 708735 - [RFE] Show column and line on XML parsing error
https://bugzilla.redhat.com/show_bug.cgi?id=708735
Bug 726771 - libvirt does not specify problem file if persistent xml is
invalid
https://bugzilla.redhat.com/show_bug.cgi?id=726771
This patch annotates APIs with low or high priority.
In low set MUST be all APIs which might eventually access monitor
(and thus block indefinitely). Other APIs may be marked as high
priority. However, some must be (e.g. domainDestroy).
For high priority calls (HPC), there are some high priority workers
(HPW) created in the pool. HPW can execute only HPC, although normal
worker can process any call regardless priority. Therefore, only those
APIs which are guaranteed to end in reasonable small amount of time
can be marked as HPC.
The size of this HPC pool is static, because HPC are expected to end
quickly, therefore jobs assigned to this pool will be served quickly.
It can be configured in libvirtd.conf via prio_workers variable.
Default is set to 5.
To mark API with low or high priority, append priority:{low|high} to
it's comment in src/remote/remote_protocol.x. This is similar to
autogen|skipgen. If not marked, the generator assumes low as default.
This patch adds the ability to make the filesystem for a filesystem
pool during a pool build.
The patch adds two new flags, no overwrite and overwrite, to control
when mkfs gets executed. By default, the patch preserves the
current behavior, i.e., if no flags are specified, pool build on a
filesystem pool only makes the directory on which the filesystem
will be mounted.
If the no overwrite flag is specified, the target device is checked
to determine if a filesystem of the type specified in the pool is
present. If a filesystem of that type is already present, mkfs is
not executed and the build call returns an error. Otherwise, mkfs
is executed and any data present on the device is overwritten.
If the overwrite flag is specified, mkfs is always executed, and any
existing data on the target device is overwritten unconditionally.
It is possible (expected/likely in Fedora 15) for a cgroup controller
to be mounted in multiple locations at the same time, due to bind
mounts. Currently we leak memory if this happens, because we overwrite
the previous 'mountPoint' string. Instead just accept the first match
we find.
* src/util/cgroup.c: Only accept first match for a cgroup
controller mount
Back in 2008 when this line of util.h was written, gnulib's verify
module didn't allow the use of multiple verify() in one file
in combination with our choice of gcc -W options. But that has
since been fixed in gnulib, and newer gnulib even maps verify()
to the C1x feature of _Static_assert, which gives even nicer
diagnostics with a new enough compiler, so we might as well go
with the simpler verify().
* src/util/util.h (VIR_ENUM_IMPL): Use simpler verify, now that
gnulib module is smarter.
The QEMU 'sendkey' command expects keys to be encoded in the same
way as the RFB extended keycode set. Specifically it wants extended
keys to have the high bit of the first byte set, while the Linux
XT KBD driver codeset uses the low bit of the second byte. To deal
with this we introduce a new keymap 'RFB' and use that in the QEMU
driver
* include/libvirt/libvirt.h.in: Add VIR_KEYCODE_SET_RFB
* src/qemu/qemu_driver.c: Use RFB keycode set instead of XT KBD
* src/util/virkeycode-mapgen.py: Auto-generate the RFB keycode
set from the XT KBD set
* src/util/virkeycode.c: Add RFB keycode entry to table. Add a
verify check on cardinality of the codeOffset table
virFileOpenAs takes desired uid:gid as arguments, and not only uses
them for a fork/setuid/setgid when retrying failed open operations,
but additionally always forces the opened file to be owned by the
given uid:gid.
One example of the problems this causes is that, when restoring a
domain from a file that is owned by the qemu user, opening the file
chowns it to root. if dynamic_ownership=1 this is coincidentally
expected, but if dynamic_ownership=0, no existing file should ever
have its ownership changed.
This patch adds an extra check before calling fchown() - it only does
it if O_CREAT was passed to virFileOpenAs() in the openflags.
Now, bad key-code in send-key can cause segmentation fault in libvirt.
(example)
% virsh send-key --codeset win32 12
error: End of file while reading data: Input/output error
This is caused by overrun at scanning keycode array.
Fix it.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Often, we want to use XPath functions on the just-parsed document;
fold this into the parser function for convenience.
* src/util/xml.h (virXMLParseHelper): Add argument.
(virXMLParseStrHelper, virXMLParseFileHelper): Delete.
(virXMLParseCtxt, virXMLParseStringCtxt, virXMLParseFileCtxt): New
macros.
* src/libvirt_private.syms (xml.h): Remove deleted functions.
* src/util/xml.c (virXMLParseHelper): Add argument.
(virXMLParseStrHelper, virXMLParseFileHelper): Delete.
Regression introduced in commit b7e5ca4.
Mingw lacks kill(), but we were only using it for a sanity check;
so we can go with one less check.
Also, on OOM error, this function should outright fail rather than
claim that the pid file was successfully read.
* src/util/virpidfile.c (virPidFileReadPathIfAlive): Skip kill
call where unsupported, and report error on OOM.
Get rid of the #if __linux__ check in virPidFileReadPathIfAlive that
was preventing a check of a symbolic link in /proc/<pid>/exe on
non-linux platforms against an expected executable. Replace
this with a run-time check testing whether the /proc/<pid>/exe is a
symbolic link and if so call the function doing the comparison
against the expected file the link is supposed to point to.
This patch renames getPhysfn to getPhysfnDev and adds code to get the
Physical function and Virtual Function index of the direct attach linkdev (if
the direct attach interface is a SRIOV VF). The idea is to send the port
profile message to a PF if the direct attach interface is a SRIOV VF.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
This patch adds the following functions to get PF/VF relationship of an SRIOV
network interface:
ifaceIsVirtualFunction: Function to check if a network interface is a SRIOV VF
ifaceGetVirtualFunctionIndex: Function to get VF index if a network interface is a SRIOV VF
ifaceGetPhysicalFunction: Function to get the PF net interface name of a SRIOV VF net interface
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
This patch adds the following helper functions:
pciDeviceIsVirtualFunction: Function to check if a pci device is a sriov VF
pciGetVirtualFunctionIndex: Function to get the VF index of a sriov VF
pciDeviceNetName: Function to get the network device name of a pci device
pciConfigAddressCompare: Function to compare pci config addresses
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch moves some of the sriov related pci code from node_device driver
to src/util/pci.[ch]. Some functions had to go thru name and argument list
change to accommodate the move.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
With gcc 4.5.1:
util/virpidfile.c: In function 'virPidFileAcquirePath':
util/virpidfile.c:308:66: error: nested extern declaration of '_gl_verify_function2' [-Wnested-externs]
Then in tests/commandtest.c, the new virPidFile APIs need to be used.
* src/util/virpidfile.c (virPidFileAcquirePath): Move verify to
top level.
* tests/commandtest.c: Use new pid APIs.
In daemons using pidfiles to protect against concurrent
execution there is a possibility that a crash may leave a stale
pidfile on disk, which then prevents later restart of the daemon.
To avoid this problem, introduce a pair of APIs which make
use of virFileLock to ensure crash-safe & race condition-safe
pidfile acquisition & releae
* src/libvirt_private.syms, src/util/virpidfile.c,
src/util/virpidfile.h: Add virPidFileAcquire and virPidFileRelease
In some cases the caller of virPidFileRead might like extra checks
to determine whether the pid just read is really the one they are
expecting. This adds virPidFileReadIfAlive which will check whether
the pid is still alive with kill(0, -1), and (on linux only) will
look at /proc/$PID/path
* libvirt_private.syms, util/virpidfile.c, util/virpidfile.h: Add
virPidFileReadIfValid and virPidFileReadPathIfValid
* network/bridge_driver.c: Use new APIs to check PID validity
The functions for manipulating pidfiles are in util/util.{c,h}.
We will shortly be adding some further pidfile related functions.
To avoid further growing util.c, this moves the pidfile related
functions into a dedicated virpidfile.{c,h}. The functions are
also all renamed to have 'virPidFile' as their name prefix
* util/util.h, util/util.c: Remove all pidfile code
* util/virpidfile.c, util/virpidfile.h: Add new APIs for pidfile
handling.
* lxc/lxc_controller.c, lxc/lxc_driver.c, network/bridge_driver.c,
qemu/qemu_process.c: Add virpidfile.h include and adapt for API
renames
Add some simple wrappers around the fcntl() discretionary file
locking capability.
* src/util/util.c, src/util/util.h, src/libvirt_private.syms: Add
virFileLock and virFileUnlock APIs
Leak detected by Coverity; only possible on unlikely ptsname_r
failure. Additionally, the man page for ptsname_r states that
failure is merely non-zero, not necessarily -1.
* src/util/util.c (virFileOpenTtyAt): Avoid leak on ptsname_r
failure.
Coverity detected that ifaceGetNthParent had already dereferenced
'nth' prior to the conditional; all callers already complied with
passing a non-NULL pointer so make this part of the contract.
* src/util/interface.h (ifaceGetNthParent): Add annotations.
* src/util/interface.c (ifaceGetNthParent): Drop useless null check.
Coverity complained that 395 out of 409 virAsprintf calls are
checked, and therefore assumed that the remaining cases are bugs
waiting to happen. But in each of these cases, a failed virAsprintf
will properly set the target string to NULL, and pass on that
failure to the caller, without wasting efforts to check the call.
Adding the ignore_value silences Coverity.
* src/conf/domain_audit.c (virDomainAuditGetRdev): Ignore
virAsprintf return value, when it behaves like we need.
* src/network/bridge_driver.c (networkDnsmasqLeaseFileNameDefault)
(networkRadvdConfigFileName, networkBridgeDummyNicName)
(networkRadvdPidfileBasename): Likewise.
* src/util/storage_file.c (absolutePathFromBaseFile): Likewise.
* src/openvz/openvz_driver.c (openvzGenerateContainerVethName):
Likewise.
* src/util/command.c (virCommandTranslateStatus): Likewise.
Commit 3709a386 ported hooks codes to new command execution API,
together with the useful error message removed. Though we can't
get "errbuf" from the new command execution API anymore, still
we can give a more useful error.
https://bugzilla.redhat.com/show_bug.cgi?id=726398
Every DomainNetDef has a bandwidth, as does every portgroup.
Whenever a DomainNetDef of type NETWORK is about to be used, a call is
made to networkAllocateActualDevice(). This function chooses the "best"
bandwidth object and places it in the DomainActualNetDef.
From that point on, whenever some code needs to use the bandwidth data
for the interface, it's retrieved with virDomainNetGetActualBandwidth(),
which will always return the "best" info as determined in the
previous step.
Although most functions in libvirt return 0 on success and < 0 on
failure, there are a few functions lingering around that return errno
(a positive value) on failure, and sometimes code calling those
functions incorrectly assumes the <0 standard. I noticed one of these
the other day when auditing networkStartDhcpDaemon after Guido Gunther
found a place where success was improperly returned on failure (that
patch has been acked and is pending a push). The problem was that it
expected the return value from virFileReadPid to be < 0 on failure,
but it was actually positive (it was also neglected to set the return
code in this case, similar to the bug found by Guido).
This all led to the fact that *all* of the virFile*Pid functions in
util.c are returning errno on failure. This patch remedies that
problem by changing them all to return -errno on failure, and makes
any necessary changes to callers of the functions. (In the meantime, I
also properly set the return code on failure of virFileReadPid in
networkStartDhcpDaemon).
These functions parse given XML node and return pointer to the
output. Unknown elements are silently ignored. Attributes must
be integer and must fit in unsigned long long.
Free function frees elements of virBandwidth structure.
This function uses ioctl(SIOCGIFADDR), which limits it to returning
the first IPv4 address of an interface, but that's what we want right
now (the place we're going to use the address only accepts one).
Also prepend $(AM_V_GEN) to the command line, mark virkeycode-mapgen.py
as executable and switch the shebang line from /bin/python to the
commonly use /usr/bin/python.
All of the functions in util/interface.c were returning 0 on success,
but some returned -1 on error, and some returned a positive value
(usually the value of errno, but sometimes just 1). Libvirt's standard
is to return < 0 on error (in the case of functions that need to
return errno, -errno is returned.
This patch modifies all functions in interface.c to consistently
return < 0 on error, and makes changes to callers of those functions
where necessary.
O_DIRECT has stringent requirements. Rather than make lots of changes
at each site that wants to use O_DIRECT, it is easier to offload
the work through a helper process that mirrors the I/O between a
pipe and the actual direct fd, so that the other end of the pipe
no longer has to worry about constraints.
Plus, if the kernel ever gains better posix_fadvise support, then we
only have to touch a single file to let all callers benefit from a
more efficient way to avoid file system caching.
* src/util/virfile.h (virFileDirectFdFlag, virFileDirectFdNew)
(virFileDirectFdClose, virFileDirectFdFree): New prototypes.
* src/util/virdirect.c: Implement new wrapper object.
* src/libvirt_private.syms (virfile.h): Export new symbols.
* cfg.mk (useless_free_options): Add to list.
* po/POTFILES.in: Add new translations.
