The WITH_VIRTUALPORT macro is defined to 0 when disabled, not
left undefined. So #if must be used instead of #ifdef
* src/util/virnetdevvportprofile.c: s/#ifdef/#if/
In preparation of DHCP Snooping and the detection of multiple IP
addresses per interface:
The hash table that is used to collect the detected IP address of an
interface can so far only handle one IP address per interface. With
this patch we extend this to allow it to handle a list of IP addresses.
Above changes the returned variable type of virNWFilterGetIpAddrForIfname()
from char * to virNWFilterVarValuePtr; adapt all existing functions calling
this function.
Signed-off-by: Eli Qiao <taget@linux.vnet.ibm.com>
When configuring a URI alias like this in 'libvirt.conf':
uri_aliases = [
"jj#j=qemu+ssh://root@127.0.0.1/system",
"sleet=qemu+ssh://root@sleet.cloud.example.com/system",
]
virsh -c jj#j
It will show this error message:
'no connection driver available for No connection for URI jj#j'
Actually，we expect this message below：
Malformed 'uri_aliases' config entry 'jj#j=qemu+ssh://root@127.0.0.1/system', aliases may only contain 'a-Z, 0-9, _, -'
Give this patch to fix this error.
This patch adds support for filtering of STP (spanning tree protocol) traffic
to the parser and makes us of the ebtables support for STP filtering. This code
now enables the filtering of traffic in chains with prefix 'stp'.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
With hunks borrowed from one of David Steven's previous patches, we now
add the capability of having a 'mac' chain which is useful to filter
for multiple valid MAC addresses.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
virStorageBackendLogicalDeleteVol() could not remove the lv with error
"could not remove open logical volume" sometimes. Generally it's caused
by the volume is still active, even if lvremove tries to remove it with
option "--force".
This patch is to fix it by disbale the lv first using "lvchange -aln"
and "lvremove -f" afterwards if the direct "lvremove -f" failed.
This patch exports KVM Host Power Management capabilities as XML so that
higher-level systems management software can make use of these features
available in the host.
The script "pm-is-supported" (from pm-utils package) is run to discover if
Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host.
If either of them are supported, then a new tag "<power_management>" is
introduced in the XML under the <host> tag.
However in case the query to check for power management features succeeded,
but the host does not support any such feature, then the XML will contain
an empty <power_management/> tag. In the event that the PM query itself
failed, the XML will not contain any "power_management" tag.
To use this, new APIs could be implemented in libvirt to exploit power
management features such as S3/S4.
None of the callers cared if str was updated to point to the next
byte after the parsed cpuset; simplifying this results in quite
a few code simplifications. Additionally, virCPUDefParseXML was
strdup()'ing a malloc()'d string; avoiding a memory copy resulted
in less code.
* src/conf/domain_conf.h (virDomainCpuSetParse): Alter signature.
* src/conf/domain_conf.c (virDomainCpuSetParse): Don't modify str.
(virDomainVcpuPinDefParseXML, virDomainDefParseXML): Adjust
callers.
* src/conf/cpu_conf.c (virCPUDefParseXML): Likewise.
* src/xen/xend_internal.c (sexpr_to_xend_topology): Likewise.
* src/xen/xm_internal.c (xenXMDomainPinVcpu): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr): Likewise.
* src/xenxs/xen_xm.c (xenParseXM): Likewise.
For direct attach devices, in qemuBuildCommandLine, we seem to be freeing
actual device on error path (with networkReleaseActualDevice). But the actual
device is not deleted.
qemuProcessStop eventually deletes the direct attach device and releases
actual device. But by the time qemuProcessStop is called qemuBuildCommandLine
has already freed actual device, leaving stray macvtap devices behind on error.
So the simplest fix is to remove the networkReleaseActualDevice in
qemuBuildCommandLine. This patch does just that.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Now, when we support multiple consoles per domain,
the vm->def->console[0] can still remain an alias
for vm->def->serial[0]; However, we need to copy
it's source definition as well otherwise we'll regress
on virDomainOpenConsole.
Mingw32 complains if you request export of a symbol which does
not in fact exist.
* src/libvirt_bridge.syms, src/libvirt_macvtap.syms: Delete
obsolete files
* src/libvirt_private.syms: Remove virNetServerGetDBusConn
* src/libvirt_dbus.syms: Add virNetServerGetDBusConn
lvs outputs "[$lvname_vorigin]" for the virtual snapshot lv
(created with "--virtualsize"), and the original device pointed
by "$lvname_vorigin" is just for lvm internal use, one should
never use it.
Per lvm's nameing rules, "[" is not valid as part of the vg/lv name.
(man 8 lvm).
<quote>
VALID NAMES
The following characters are valid for VG and LV names: a-z A-Z 0-9 + _
. -
VG and LV names cannot begin with a hyphen. There are also various
reserved names that are used internally by lvm that can not be used as
LV or VG names. A VG cannot be called anything that exists in /dev/ at
the time of creation, nor can it be called '.' or '..'. A LV cannot be
called '.' '..' 'snapshot' or 'pvmove'. The LV name may also not con‐
tain the strings '_mlog' or '_mimage'
</quote>
So we can skip the set the lv's backingStore by checking if the name
begins with a "[".
This patch adds support for filtering of VLAN (802.1Q) traffic to the
parser and makes us of the ebtables support for VLAN filtering. This code
now enables the filtering of traffic in chains with prefix 'vlan'.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Xen4.1 initializes some unspecified sexpr config items to an empty
string, unlike previous Xen versions that would leave the item unset.
E.g. the kernel item for an HVM guest (non-direct kernel boot):
Xen4.0 and earlier
...
(image
(hvm
(kernel )
...
Xen4.1
...
(image
(hvm
(kernel '')
...
The empty string for kernel causes some grief in subsequent parsing
where existence of specified kernel is checked, e.g.
if (!def->os.kernel)
...
This patch solves the problem in sexpr_node_copy() by not copying
a node containing an empty string.
This prepares for subsequent patches which introduce dependence
on cgroup cpuset. Enable cgroup cpuset by default so users don't
have to modify configuration file before encountering a cpuset
error.
This patch modifies the NWFilter parameter parser to support multiple
elements with the same name and to internally build a list of items.
An example of the XML looks like this:
<parameter name='TEST' value='10.1.2.3'/>
<parameter name='TEST' value='10.2.3.4'/>
<parameter name='TEST' value='10.1.1.1'/>
The list of values is then stored in the newly introduced data type
virNWFilterVarValue.
The XML formatter is also adapted to print out all items in alphabetical
order sorted by 'name'.
This patch also fixes a bug in the XML schema on the way.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch extends the NWFilter driver for Linux (ebiptables) to create
rules for each member of a previously introduced list. If for example
an attribute value (internally) looks like this:
IP = [10.0.0.1, 10.0.0.2, 10.0.0.3]
then 3 rules will be generated for a rule accessing the variable 'IP',
one for each member of the list. The effect of this is that this now
allows for filtering for multiple values in one field. This can then be
used to support for filtering/allowing of multiple IP addresses per
interface.
An iterator is introduced that extracts each member of a list and
puts it into a hash table which then is passed to the function creating
a rule. For the above example the iterator would cause 3 loops.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
NWFilters can be provided name-value pairs using the following
XML notation:
<filterref filter='xyz'>
<parameter name='PORT' value='80'/>
<parameter name='VAL' value='abc'/>
</filterref>
The internal representation currently is so that a name is stored as a
string and the value as well. This patch now addresses the value part of it
and introduces a data structure for storing a value either as a simple
value or as an array for later support of lists.
This patch adjusts all code that was handling the values in hash tables
and makes it use the new data type.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The previous patch extends the priority of filtering rules into negative
numbers. We now use this possibility to interleave the jumping into
chains with filtering rules to for example create the 'root' table of
an interface with the following sequence of rules:
Bridge chain: libvirt-I-vnet0, entries: 6, policy: ACCEPT
-p IPv4 -j I-vnet0-ipv4
-p ARP -j I-vnet0-arp
-p ARP -j ACCEPT
-p 0x8035 -j I-vnet0-rarp
-p 0x835 -j ACCEPT
-j DROP
The '-p ARP -j ACCEPT' rule now appears between the jumps.
Since the 'arp' chain has been assigned priority -700 and the 'rarp'
chain -600, the above ordering can now be achieved with the following
rule:
<rule action='accept' direction='out' priority='-650'>
<mac protocolid='arp'/>
</rule>
This patch now sorts the commands generating the above shown jumps into
chains and interleaves their execution with those for generating rules.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
So far rules' priorities have only been valid in the range [0,1000].
Now I am extending their priority into the range [-1000, 1000] for subsequently
being able to sort rules and the access of (jumps into) chains following
priorities.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch enables chains that have a known prefix in their name.
Known prefixes are: 'ipv4', 'ipv6', 'arp', 'rarp'. All prefixes
are also protocols that can be evaluated on the ebtables level.
Following the prefix they will be automatically connected to an interface's
'root' chain and jumped into following the protocol they evaluate, i.e.,
a table 'arp-xyz' will be accessed from the root table using
ebtables -t nat -A <iface root table> -p arp -j I-<ifname>-arp-xyz
thus generating a 'root' chain like this one here:
Bridge chain: libvirt-O-vnet0, entries: 5, policy: ACCEPT
-p IPv4 -j O-vnet0-ipv4
-p ARP -j O-vnet0-arp
-p 0x8035 -j O-vnet0-rarp
-p ARP -j O-vnet0-arp-xyz
-j DROP
where the chain 'arp-xyz' is accessed for filtering of ARP packets.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch extends the filter XML to support priorities of chains
in the XML. An example would be:
<filter name='allow-arpxyz' chain='arp-xyz' priority='200'>
[...]
</filter>
The permitted values for priorities are [-1000, 1000].
By setting the priority of a chain the order in which it is accessed
from the interface root chain can be influenced.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Use the name of the chain rather than its type index (enum).
This pushes the later enablement of chains with user-given names
into the XML parser. For now we still only allow those names that
are well known ('root', 'arp', 'rarp', 'ipv4' and 'ipv6').
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Use scripts for the renaming and cleaning up of chains. This allows us to get
rid of some of the code that is only capable of renaming and removing chains
whose names are hardcoded.
A shell function 'collect_chains' is introduced that is given the name
of an ebtables chain and then recursively determines the names of all
chains that are accessed from this chain and its sub-chains using 'jumps'.
The resulting list of chain names is then used to delete all the found
chains by first flushing and then deleting them.
The same function is also used for renaming temporary filters to their final
names.
I tested this with the bash and dash as script interpreters.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Use the previously introduced chain priorities to sort the chains for access
from an interface's 'root' table and have them created in the proper order.
This gets rid of a lot of code that was previously creating the chains in a
more hardcoded way.
To determine what protocol a filter is used for evaluation do prefix-
matching, i.e., the filter 'arp' is used to filter for the 'arp' protocol,
'ipv4' for the 'ipv4' protocol and 'arp-xyz' will also be used to filter
for the 'arp' protocol following the prefix 'arp' in its name.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
For better handling of the sorting of chains introduce an internally used
priority. Use a lookup table to store the priorities. For now their actual
values do not matter just that the values cause the chains to be properly
sorted through changes in the following patches. However, the values are
chosen as negative so that once they are sorted along with filtering rules
(whose priority may only be positive for now) they will always be instantiated
before them (lower values cause instantiation before higher values). This
is done to maintain backwards compatibility.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Add a function to the virHashTable for getting an array of the hash table's
key-value pairs and have the keys (optionally) sorted.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Support creation of macvlan devices for LXC containers. Do not
allow setting of bandwidth controls or vport profiles due to the
complication that there is no host side visible device to work
with.
* src/lxc/lxc_driver.c: Support type=direct interfaces
Update virNetDevMacVLanCreateWithVPortProfile to allow creation
of plain macvlan devices, as well as macvtap devices. The former
is useful for LXC containers
* src/qemu/qemu_command.c: Explicitly request a macvtap device
* src/util/virnetdevmacvlan.c, src/util/virnetdevmacvlan.h: Add
new flag to allow switching between macvlan and macvtap
creation
The current lxcSetupInterfaces() method directly performs setup
of the bridge devices. Since it will shortly need to also create
macvlan devices, move the bridge related code into a separate
method
* src/lxc/lxc_driver.c: Split lxcSetupInterfaces() to create a
new lxcSetupInterfaceBridge()
The virDomainNetGetActualBridgeName and virDomainNetGetActualDirectDev
methods both return strings that point to data in the virDomainDefPtr
struct, and should therefore not be freed. The return values should
thus be 'const char *' not 'char *'.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Mark const
* src/network/bridge_driver.c: Update to use a const char *
Move the ifaceMacvtapLinkDump and ifaceGetNthParent functions
into virnetdevvportprofile.c since they are specific to that
code. This avoids polluting the headers with the Linux specific
netlink data types
* src/util/interface.c, src/util/interface.h: Move
ifaceMacvtapLinkDump and ifaceGetNthParent functions and delete
remaining file
* src/util/virnetdevvportprofile.c: Add ifaceMacvtapLinkDump
and ifaceGetNthParent functions
* src/network/bridge_driver.c, src/nwfilter/nwfilter_gentech_driver.c,
src/nwfilter/nwfilter_learnipaddr.c, src/util/virnetdevmacvlan.c:
Remove include of interface.h
Rename ifaceIsVirtualFunction to virNetDevIsVirtualFunction,
ifaceGetVirtualFunctionIndex to virNetDevGetVirtualFunctionIndex
and ifaceGetPhysicalFunction to virNetDevGetPhysicalFunction
* src/util/interface.c, src/util/interface.h: Rename APIs
* src/util/virnetdevvportprofile.c: Update for API rename
Rename the ifaceCheck method to virNetDevValidateConfig and change
so that it always raises an error and returns -1 on error.
* src/util/interface.c, src/util/interface.h: Rename ifaceCheck
to virNetDevValidateConfig
* src/nwfilter/nwfilter_gentech_driver.c,
src/nwfilter/nwfilter_learnipaddr.c: Update for API rename
To match up with the existing virNetDevSetIPv4Address, rename
ifaceGetIPAddress to virNetDevGetIPv4Address
* util/interface.h, util/interface.c: Rename API
* network/bridge_driver.c: Update for API rename
Rename the ifaceGetIndex method to virNetDevGetIndex and
ifaceGetVlanID to virNetDevGetVLanID. Also change the error
reporting behaviour to always raise errors and return -1 on
failure
* util/interface.c, util/interface.h: Rename ifaceGetIndex
and ifaceGetVLAN
* nwfilter/nwfilter_gentech_driver.c, nwfilter/nwfilter_learnipaddr.c,
nwfilter/nwfilter_learnipaddr.c, util/virnetdevvportprofile.c: Update
for API renames and error handling changes
Move virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
to the virnetdev.c file where they naturally belong
* util/interface.c, util/interface.h: Remove
virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
* util/virnetdev.c, util/virnetdev.h: Add
virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
Rename ifaceReplaceMacAddress to virNetDevReplaceMacAddress
and ifaceRestoreMacAddress to virNetDevRestoreMacAddress.
* util/interface.c, util/interface.h, util/virnetdevmacvlan.c:
Rename APIs
Move the low level macvlan creation APIs into the
virnetdevmacvlan.c file where they more naturally
belong
* util/interface.c, util/interface.h: Remove virNetDevMacVLanCreate
and virNetDevMacVLanDelete
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h: Add
virNetDevMacVLanCreate and virNetDevMacVLanDelete
Rename ifaceMacvtapLinkAdd to virNetDevMacVLanCreate and
ifaceLinkDel to virNetDevMacVLanDelete. Strictly speaking
the latter isn't restricted to macvlan devices, but that's
the only use libvirt has for it.
* util/interface.c, util/interface.h,
util/virnetdevmacvlan.c: Rename APIs
Rename virNetDevMacVLanCreate to virNetDevMacVLanCreateWithVPortProfile
and virNetDevMacVLanDelete to virNetDevMacVLanDeleteWithVPortProfile
To make way for renaming the other macvlan creation APIs in
interface.c
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h,
qemu/qemu_command.c, qemu/qemu_hotplug.c, qemu/qemu_process.c:
Rename APIs
Rename the macvtap.c file to virnetdevmacvlan.c to reflect its
functionality. Move the port profile association code out into
virnetdevvportprofile.c. Make the APIs available unconditionally
to callers
* src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h,
* src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c
* src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h:
Pull in vport association code
* src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c,
src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include
paths & remove conditional compilation
In preparation for code re-organization, rename the Macvtap
management APIs to have the following patterns
virNetDevMacVLanXXXXX - macvlan/macvtap interface management
virNetDevVPortProfileXXXX - virtual port profile management
* src/util/macvtap.c, src/util/macvtap.h: Rename APIs
* src/conf/domain_conf.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_command.h,
src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
src/qemu/qemu_process.h: Update for renamed APIs
Add routines to generate -numa QEMU command line option based on
<numa> ... </numa> XML specifications.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
This patch adds XML definitions for guest NUMA specification and contains
routines to parse the same. The guest NUMA specification looks like this:
<cpu>
...
<topology sockets='2' cores='4' threads='2'/>
<numa>
<cell cpus='0-7' memory='512000'/>
<cell cpus='8-15' memory='512000'/>
</numa>
...
</cpu>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
For whatever reason, the kernel allows you to create a regular
file named /dev/sdc.12345; although this file will disappear the
next time devtmpfs is remounted. If you let libvirt generate
the name of the external snapshot for a disk image originally
using the block device /dev/sdc, then the domain will be rendered
unbootable once the qcow2 file is lost on the next devtmpfs
remount. In this case, the user should have used 'virsh
snapshot-create --xmlfile' or 'virsh snapshot-create-as --diskspec'
to specify the name for the qcow2 file in a sane location, rather
than relying on libvirt generating a name that is most likely to
be wrong. We can help avoid naive mistakes by enforcing that
the user provide the external name for any backing file that is
not a regular file.
* src/conf/domain_conf.c (virDomainSnapshotAlignDisks): Only
generate names if backing file exists as regular file.
Reported by MATSUDA Daiki.
I missed adding virNetServerGetDBusConn() to libvirtd_private.syms
in commit b8adfcc6, which didn't cause a problem in 0.9.6 but
results in this build error in 0.9.7
libvirtd-remote.o: In function `remoteDispatchAuthPolkit':
remote.c:(.text+0x188dd): undefined reference to `virNetServerGetDBusConn'
Due to the asynchronous nature of streams, we might continue to
receive some stream packets from the server even after we have
shutdown the stream on the client side. These should be discarded
silently, rather than raising an error in the RPC layer.
* src/rpc/virnetclient.c: Discard stream data silently
Add a new virNetClientSendNonBlock which returns 2 on
full send, 1 on partial send, 0 on no send, -1 on error
If a partial send occurs, then a subsequent call to any
of the virNetClientSend* APIs will finish any outstanding
I/O.
TODO: the virNetClientEvent event handler could be used
to speed up completion of partial sends if an event loop
is present.
* src/rpc/virnetsocket.h, src/rpc/virnetsocket.c: Add new
virNetSocketHasPendingData() API to test for cached
data pending send.
* src/rpc/virnetclient.c, src/rpc/virnetclient.h: Add new
virNetClientSendNonBlock() API to send non-blocking API
Stop multiplexing virNetClientSend for two different purposes,
instead add virNetClientSendWithReply and virNetClientSendNoReply
* src/rpc/virnetclient.c, src/rpc/virnetclient.h: Replace
virNetClientSend with virNetClientSendWithReply and
virNetClientSendNoReply
* src/rpc/virnetclientprogram.c, src/rpc/virnetclientstream.c:
Update for new API names
Remove some duplication by pulling the code for passing the
buck out into a helper method
* src/rpc/virnetclient.c: Introduce virNetClientIOEventLoopPassTheBuck
Instead of inferring whether the buck is held from the waitDispatch
pointer, use an explicit 'bool haveTheBuck' field
* src/rpc/virnetclient.c: Explicitly track the buck
Directly messing around with the linked list is potentially
dangerous. Introduce some helper APIs to deal with list
manipulating the list
* src/rpc/virnetclient.c: Create linked list handlers
This improves the support for qemu rbd devices by adding support for a few
key features (e.g., authentication) and cleaning up the way in which
rbd configuration options are passed to qemu.
An <auth> member of the disk source xml specifies how librbd should
authenticate. The username attribute is the Ceph/RBD user to authenticate as.
The usage or uuid attributes specify which secret to use. Usage is an
arbitrary identifier local to libvirt.
The old RBD support relied on setting an environment variable to
communicate information to qemu/librbd. Instead, pass those options
explicitly to qemu. Update the qemu argument parsing and tests
accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Replacing the strchr call with two variables through a strstr call.
Calling strchr with two variables triggers a gcc 4.3/4.4
bug when used in combination with -Wlogical-op and at least -O1.
The ifaceSetMac and ifaceGetMac APIs duplicate the functionality
of the virNetDevSetMAC and virNetDevGetMAC APIs, but returning
errno's instead of raising errors.
* src/util/interface.c, src/util/interface.h: Remove
ifaceSetMac and ifaceGetMac APIs, adjusting callers
for new error behaviour
The ifaceUp, ifaceDown, ifaceCtrl & ifaceIsUp APIs can be replaced
with calls to virNetDevSetOnline and virNetDevIsOnline
* src/util/interface.c, src/util/interface.h: Delete ifaceUp,
ifaceDown, ifaceCtrl & ifaceIsUp
* src/nwfilter/nwfilter_gentech_driver.c, src/util/macvtap.c:
Update to use virNetDevSetOnline and virNetDevIsOnline
Move the virNetDevSetName and virNetDevSetNamespace APIs out
of LXC's veth.c and into virnetdev.c.
Move the remaining content of the file to src/util/virnetdevveth.c
* src/lxc/veth.c: Rename to src/util/virnetdevveth.c
* src/lxc/veth.h: Rename to src/util/virnetdevveth.h
* src/util/virnetdev.c, src/util/virnetdev.h: Add
virNetDevSetName and virNetDevSetNamespace
* src/lxc/lxc_container.c, src/lxc/lxc_controller.c,
src/lxc/lxc_driver.c: Update include paths
The src/lxc/veth.c file contains APIs for managing veth devices,
but some of the APIs duplicate stuff from src/util/virnetdev.h.
Delete thed duplicate APIs and rename the remaining ones to
follow virNetDevVethXXXX
* src/lxc/veth.c, src/lxc/veth.h: Rename APIs & delete duplicates
* src/lxc/lxc_container.c, src/lxc/lxc_controller.c,
src/lxc/lxc_driver.c: Update for API renaming
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines
- src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
- src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
- src/util/virsocketaddr.c: virSocketAddr and APIs
- src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
for virNetDevBandwidth
- src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
for virNetDevVPortProfile
* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
src/conf/domain_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/conf/nwfilter_conf.h,
src/esx/esx_util.h, src/network/bridge_driver.c,
src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
src/util/virnetdev.h, src/util/virnetdevtap.c,
tools/virsh.c: Update include files
The virtual port profile parsing/formatting APIs do not
correctly handle unknown profile type strings/numbers.
They behave as a no-op, instead of raising an error
* src/util/network.c, src/util/network.h: Fix error
handling of port profile APIs
* src/conf/domain_conf.c, src/conf/network_conf.c: Update
for API changes
Rename the virVirtualPortProfileParams struct to be
virNetDevVPortProfile, and rename the APIs to match
this prefix.
* src/util/network.c, src/util/network.h: Rename port profile
APIs
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/network_conf.c, src/conf/network_conf.h,
src/network/bridge_driver.c, src/qemu/qemu_hotplug.c,
src/util/macvtap.c, src/util/macvtap.h: Update for
renamed APIs/structs
Hi
Commit c31d23a787 removed the "conn"
parameter from qemuPhysIfaceConnect(), but it's still used if
WITH_MACVTAP is false. Also, it's still mentioned in the comment
above the function:
/**
* qemuPhysIfaceConnect:
* @def: the definition of the VM (needed by 802.1Qbh and audit)
* @conn: pointer to virConnect object
* @driver: pointer to the qemud_driver
* @net: pointer to he VM's interface description with direct device type
* @qemuCaps: flags for qemu
*
* Returns a filedescriptor on success or -1 in case of error.
*/
int
qemuPhysIfaceConnect(virDomainDefPtr def,
struct qemud_driver *driver,
virDomainNetDefPtr net,
virBitmapPtr qemuCaps,
enum virVMOperationType vmop)
{
int rc;
#if WITH_MACVTAP
[...]
#else
(void)def;
(void)conn;
(void)net;
(void)qemuCaps;
(void)driver;
(void)vmop;
qemuReportError(VIR_ERR_INTERNAL_ERROR,
"%s", _("No support for macvtap device"));
rc = -1;
#endif
return rc;
}
--
Michael Wood <esiotrot@gmail.com>
From f4fc43b4111a4c099395c55902e497b8965e2b53 Mon Sep 17 00:00:00 2001
From: Michael Wood <esiotrot@gmail.com>
Date: Sat, 12 Nov 2011 13:37:53 +0200
Subject: [PATCH] Fix build without MACVTAP.
which would blow away all volumes. Honor VIR_STORAGE_POOL_BUILD_OVERWRITE
to force a rebuild.
This was caught by libvirt-tck's storage/110-disk-pool.t.
Qemu will be the first driver to make use of a typed string in the
next round of additions. Separate out the trivial addition.
* src/qemu/qemu_driver.c (qemudSupportsFeature): Advertise feature.
(qemuDomainGetBlkioParameters, qemuDomainGetMemoryParameters)
(qemuGetSchedulerParametersFlags, qemudDomainBlockStatsFlags):
Allow typed strings flag where trivially supported.
Send and receive string typed parameters across RPC. This also
completes the back-compat mentioned in the previous patch - the
only time we have an older client talking to a newer server is
if RPC is in use, so filtering out strings during RPC prevents
returning an unknown type to the older client.
* src/remote/remote_protocol.x (remote_typed_param_value): Add
another union value.
* daemon/remote.c (remoteDeserializeTypedParameters): Handle
strings on rpc.
(remoteSerializeTypedParameters): Likewise; plus filter out
strings when replying to older clients. Adjust callers.
* src/remote/remote_driver.c (remoteFreeTypedParameters)
(remoteSerializeTypedParameters)
(remoteDeserializeTypedParameters): Handle strings on rpc.
* src/rpc/gendispatch.pl: Properly clean up typed arrays.
* src/remote_protocol-structs: Update.
Based on an initial patch by Hu Tao, with feedback from
Daniel P. Berrange.
Signed-off-by: Eric Blake <eblake@redhat.com>
This allows strings to be transported between client and server
in the context of name-type-value virTypedParameter functions.
For compatibility,
o new clients will not send strings to old servers, based on
a feature check
o new servers will not send strings to old clients without the
flag VIR_TYPED_PARAM_STRING_OKAY; this will be enforced at
the RPC layer in the next patch, so that drivers need not
worry about it in general. The one exception is that
virDomainGetSchedulerParameters lacks a flags argument, so
it must not return a string; drivers that forward that
function on to virDomainGetSchedulerParametersFlags will
have to pay attention to the flag.
o the flag VIR_TYPED_PARAM_STRING_OKAY is set automatically,
based on a feature check (so far, no driver implements it),
so clients do not have to worry about it
Future patches can then enable the feature on a per-driver basis.
This patch also ensures that drivers can blindly strdup() field
names (previously, a malicious client could stuff 80 non-NUL bytes
into field and cause a read overrun).
* src/libvirt_internal.h (VIR_DRV_FEATURE_TYPED_PARAM_STRING): New
driver feature.
* src/libvirt.c (virTypedParameterValidateSet)
(virTypedParameterSanitizeGet): New helper functions.
(virDomainSetMemoryParameters, virDomainSetBlkioParameters)
(virDomainSetSchedulerParameters)
(virDomainSetSchedulerParametersFlags)
(virDomainGetMemoryParameters, virDomainGetBlkioParameters)
(virDomainGetSchedulerParameters)
(virDomainGetSchedulerParametersFlags, virDomainBlockStatsFlags):
Use them.
* src/util/util.h (virTypedParameterArrayClear): New helper
function.
* src/util/util.c (virTypedParameterArrayClear): Implement it.
* src/libvirt_private.syms (util.h): Export it.
Based on an initial patch by Hu Tao, with feedback from
Daniel P. Berrange.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add virnetdev.h,virnetdevbridge.h,virnetdevtap.h to private symbols,
since debian linker no longer allows transitive link resolution
Signed-off-by: Eli Qiao <taget@linux.vnet.ibm.com>
This reverts commit ef1065cf5ac; see also this bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=751900
In qemu 0.15.1 and earlier, during migration to file, the
qemu_savevm_state_begin and qemu_savevm_state_iterate methods
will both process as much migration data as possible until either
1. The file descriptor returns EAGAIN
2. The bandwidth rate limit is reached
If we set the rate limit to ULONG_MAX, test 2 never becomes true. We're
passing a plain file descriptor to QEMU and POSIX does not support EAGAIN on
regular files / block devices, so test 1 never becomes true either.
In the 'virsh save --bypass-cache' case, we pass a pipe instead of a
regular fd, but using a pipe adds I/O overhead, so always passing a
pipe just so qemu can see EAGAIN doesn't seem nice.
The ultimate fix needs to come from qemu - background migration must
respect asynchronous abort requests, or else periodically return
control to the main handling loop without an EAGAIN and without
waiting to hit an insanely large amount of data. But until a
version of qemu is fixed to support "unlimited" data rates while
still allowing cancellation, the best we can do is avoid the
automatic use of unlimited rates from within libvirt (users can
still explicitly change the migration rates, if they are aware that
they are giving up the ability to cancel a job).
Reverting the lone use of QEMU_DOMAIN_FILE_MIG_BANDWIDTH_MAX is
the simplest patch; this slows migration back down to a default
32M/sec cap, but also ensures that the main qemu processing loop
will still be responsive to cancellation requests. Hopefully
upstream qemu will provide us a means of safely using unlimited
speed, including a runtime probe of that capability.
* src/qemu/qemu_migration.c (qemuMigrationToFile): Revert attempt
to use unlimited migration bandwidth when migrating to file.
Signed-off-by: Daniel Veillard <veillard@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
steps to reproduce:
1. having a network xml file(named default.xml) like this one:
<network>
<name>default</name>
<uuid>c5322c4c-81d0-4985-a363-ad6389780d89</uuid>
<bridge name="virbr0" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
</dhcp>
</ip>
</network>
in /etc/libvirt/qemu/networks/, and mark it as autostart:
$ ls -l /etc/libvirt/qemu/networks/autostart
total 0
lrwxrwxrwx 1 root root 14 Oct 12 14:02 default.xml -> ../default.xml
2. start libvirtd and the device virbr0 is not automatically up.
The reason is that the function virNetDevExists is now returns 1 if
the device exists, comparing to the former one returns 0 if the device
exists. But with only this fix will cause a segmentation fault(the same
steps as above) that is fixed by the second chunk of code.
CC libvirt_driver_xenapi_la-xenapi_driver.lo
xenapi/xenapi_driver.c: In function 'xenapiDomainGetVcpus':
xenapi/xenapi_driver.c:1209:21: error: variable 'cpus' set but not used [-Werror=unused-but-set-variable]
* src/xenapi/xenapi_driver.c (xenapiDomainGetVcpus): Silence
compiler warning.
It's not worth even worrying about a temporary file, unless we
ever expect the script to exceed maximum command-line argument
length limits.
* src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesExecCLI):
Run the commands as an argument to /bin/sh, rather than worrying
about a temporary file.
(ebiptablesWriteToTempFile): Delete unused function.
If /tmp is mounted with the noexec flag (common on security-conscious
systems), then nwfilter will fail to initialize, because we cannot
run any temporary script via virRun("/tmp/script"); but we _can_
use "/bin/sh /tmp/script". For that matter, using /tmp risks collisions
with other unrelated programs; we already have /var/run/libvirt as a
dedicated temporary directory for use by libvirt.
* src/nwfilter/nwfilter_ebiptables_driver.c
(ebiptablesWriteToTempFile): Use internal directory, not /tmp;
drop attempts to make script executable; and detect close error.
(ebiptablesExecCLI): Switch to virCommand, and invoke the shell to
read the script, rather than requiring an executable script.
The socket address APIs in src/util/network.h either take the
form virSocketAddrXXX, virSocketXXX or virSocketXXXAddr.
Sanitize this so everything is virSocketAddrXXXX, and ensure
that the virSocketAddr parameter is always the first one.
* src/util/network.c, src/util/network.h: Santize socket
address API naming
* src/conf/domain_conf.c, src/conf/network_conf.c,
src/conf/nwfilter_conf.c, src/network/bridge_driver.c,
src/nwfilter/nwfilter_ebiptables_driver.c,
src/nwfilter/nwfilter_learnipaddr.c,
src/qemu/qemu_command.c, src/rpc/virnetsocket.c,
src/util/dnsmasq.c, src/util/iptables.c,
src/util/virnetdev.c, src/vbox/vbox_tmpl.c: Update for
API renaming
Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces
* src/util/virnetdev.c: APIs for any type of network interface
* src/util/virnetdevbridge.c: APIs for bridge interfaces
* src/util/virnetdevtap.c: APIs for TAP interfaces
* src/util/virnetdev.c, src/util/virnetdev.h,
src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
src/uml/uml_driver.c: Update #include directives
Convert the virNetDevBridgeSetSTP and virNetDevBridgeSetSTPDelay
to use ioctls instead of spawning brctl.
Implement the virNetDevBridgeGetSTP and virNetDevBridgeGetSTPDelay
methods which were declared in the header but never existed
* src/util/bridge.c: Convert to use bridge ioctls instead of brctl
The MTU management APIs are useful to other code inside libvirt,
so should be exposed as non-static APIs.
* src/util/bridge.c, src/util/bridge.h: Expose virNetDevSetMTU,
virNetDevSetMTUFromDevice & virNetDevGetMTU
The existing brXXX APIs in src/util/bridge.h are renamed to
follow one of three different conventions
- virNetDevXXX - operations for any type of interface
- virNetDevBridgeXXX - operations for bridge interfaces
- virNetDevTapXXX - operations for tap interfaces
* src/util/bridge.h, src/util/bridge.c: Rename all APIs
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Update for API renaming
Currently every caller of the brXXX APIs has to store the returned
errno value and then raise an error message. This results in
inconsistent error messages across drivers, additional burden on
the callers and makes the error reporting inaccurate since it is
hard to distinguish different scenarios from 1 errno value.
* src/util/bridge.c: Raise errors instead of returning errnos
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Remove error reporting code
The bridge management APIs in src/util/bridge.c require a brControl
object to be passed around. This holds the file descriptor for the
control socket. This extra object complicates use of the API for
only a minor efficiency gain, which is in turn entirely offset by
the need to fork/exec the brctl command for STP configuration.
This patch removes the 'brControl' object entirely, instead opening
the control socket & closing it again within the scope of each method.
The parameter names for the APIs are also made to consistently use
'brname' for bridge device name, and 'ifname' for an interface
device name. Finally annotations are added for non-NULL parameters
and return check validation
* src/util/bridge.c, src/util/bridge.h: Remove brControl object
and update API parameter names & annotations.
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/uml/uml_conf.h, src/uml/uml_conf.c, src/uml/uml_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_conf.h,
src/qemu/qemu_driver.c: Remove reference to 'brControl' object
MacOS lacks ptsname_r, and gnulib doesn't (yet) provide it.
But we can avoid it altogether, by using gnulib openpty()
instead. Note that we do _not_ want the pt_chown module;
gnulib uses it only to implement a replacement openpty() if
the system lacks both openpty() and granpt(), but all
systems that we currently port to either have at least one of
openpty() and/or grantpt(), or lack ptys altogether. That is,
we aren't porting to any system that requires us to deal with
the hassle of installing a setuid pt_chown helper just to use
gnulib's ability to provide openpty() on obscure platforms.
* .gnulib: Update to latest, for openpty fixes
* bootstrap.conf (gnulib_modules): Add openpty, ttyname_r.
(gnulib_tool_option_extras): Exclude pt_chown module.
* src/util/util.c (virFileOpenTty): Rewrite in terms of openpty
and ttyname_r.
* src/util/util.h (virFileOpenTtyAt): Delete dead prototype.
Every instance of virCapsPtr must have the defaultConsoleTargetType
field set.
* src/security/virt-aa-helper.c: Add defaultConsoleTargetType to
virCapsPtr
The code calling sendfd/recvfd was mistakenly assuming those
calls would never block. They can in fact return EAGAIN and
this is causing us to drop the client connection when blocking
ocurrs while sending/receiving FDs.
Fixing this is a little hairy on the incoming side, since at
the point where we see the EAGAIN, we already thought we had
finished receiving all data for the packet. So we play a little
trick to reset bufferOffset again and go back into polling for
more data.
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Update
virNetSocketSendFD/RecvFD to return 0 on EAGAIN, or 1
on success
* src/rpc/virnetclient.c: Move decoding of header & fds
out of virNetClientCallDispatch and into virNetClientIOHandleInput.
Handling blocking when sending/receiving FDs
* src/rpc/virnetmessage.h: Add a 'donefds' field to track
how many FDs we've sent / received
* src/rpc/virnetserverclient.c: Handling blocking when
sending/receiving FDs
Building on 64-bit FreeBSD 8.2 complained about a cast between
a pointer and a smaller integer. Going through an intermediate
cast shuts up the compiler.
* src/util/threads-pthread.c (virThreadSelfID): Silence a warning.
While building on FreeBSD (and after fixing a ptsname_r link error),
I got this failure:
./.libs/libvirt_util.a(libvirt_util_la-threads.o)(.text+0x240): In function `virThreadCreate':
util/threads-pthread.c:185: undefined reference to `pthread_create'
It turns out that gnulib used only pthread_join for LIB_PTHREAD,
but on FreeBSD, libc provides that (as a stub function); whereas
the more complex pthread_create really does require -pthread,
which gnulib tracked under [LT]LIBMULTITHREAD.
* configure.ac (LIBS): Check LIBMULTITHREAD alongside LIB_PTHREAD.
* src/Makefile.am (THREAD_LIBS): New variable.
(libvirt_util_la_LIBADD, libvirt_lxc_LDADD): Use it.
I got this weird failure:
error: Failed to start domain simple
error: internal error cannot mix caller fds with blocking execution
and tracked it down to a use-after-free - virCommandSetOutputFD
was storing the address of a stack-local variable, which then
went out of scope before the virCommandRun that dereferenced it.
Bug introduced in commit 451cfd05 (0.9.2).
* src/lxc/lxc_driver.c (lxcBuildControllerCmd): Move log fd
registration...
(lxcVmStart): ...to caller.
All constants related to events should have a prefix of
VIR_DOMAIN_EVENT_
* include/libvirt/libvirt.h.in, src/qemu/qemu_domain.c:
Rename VIR_DOMAIN_DISK_CHANGE_MISSING_ON_START to
VIR_DOMAIN_EVENT_DISK_CHANGE_MISSING_ON_START
I ran into the following build failure:
$ mkdir -p build1 build2/a/very/deep/hierarcy
$ cd build2/a/very/deep/hierarcy
$ ../../../../../configure && make
$ cd ../../../../build1
$ ../configure && make
...
../../src/remote/remote_protocol.c:7:55: fatal error: ../../../../../src/remote/remote_protocol.h: No such file or directory
Turns out that we were sometimes generating the remote_protocol.c
file with information from the VPATH build, which is bad, since
any file shipped in the tarball should be idempotent no matter how
deep the VPATH build tree that created it.
* src/rpc/genprotocol.pl: Don't embed VPATH into generated file.
Based on a Coverity report - the return value of waitpid() should
always be checked, to avoid problems with leaking resources.
* src/lxc/lxc_controller.c (lxcControllerRun): Use simpler virPidAbort.
The default console type may vary based on the OS type. ie a Xen
paravirt guests wants a 'xen' console, while a fullvirt guests
wants a 'serial' console.
A plain integer default console type in the capabilities does
not suffice. Instead introduce a callback that is passed the
OS type.
* src/conf/capabilities.h: Use a callback for default console
type
* src/conf/domain_conf.c, src/conf/domain_conf.h: Use callback
for default console type. Add missing LXC/OpenVZ console types.
* src/esx/esx_driver.c, src/libxl/libxl_conf.c,
src/lxc/lxc_conf.c, src/openvz/openvz_conf.c,
src/phyp/phyp_driver.c, src/qemu/qemu_capabilities.c,
src/uml/uml_conf.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_conf.c, src/xen/xen_hypervisor.c,
src/xenapi/xenapi_driver.c: Set default console type callback
To allow virDomainOpenConsole to access non-primary consoles,
device aliases are required to be set. Until now only the QEMU
driver has done this. Update LXC & UML to set aliases for any
console devices
* src/lxc/lxc_driver.c, src/uml/uml_driver.c: Set aliases
for console devices
When no <target> element was set at all, the default console
target type was not being honoured
* src/conf/domain_conf.c: Set default target type for consoles
with no <target>
Currently the LXC controller only supports setup of a single
text console. This is wired up to the container init's stdio,
as well as /dev/console and /dev/tty1. Extending support for
multiple consoles, means wiring up additional PTYs to /dev/tty2,
/dev/tty3, etc, etc. The LXC controller is passed multiple open
file handles, one for each console requested.
* src/lxc/lxc_container.c, src/lxc/lxc_container.h: Wire up
all the /dev/ttyN links required to symlink to /dev/pts/NN
* src/lxc/lxc_container.h: Open more container side /dev/pts/NN
devices, and adapt event loop to handle I/O from all consoles
* src/lxc/lxc_driver.c: Setup multiple host side PTYs
The current I/O code for LXC uses a hand crafted event loop
to forward I/O between the container & host app, based on
epoll to handle EOF on PTYs. This event loop is not easily
extensible to add more consoles, or monitor other types of
file descriptors.
Remove the custom event loop and replace it with a normal
libvirt event loop. When detecting EOF on a PTY, disable
the event watch on that FD, and fork off a background thread
that does a edge-triggered epoll() on the FD. When the FD
finally shows new incoming data, the thread re-enables the
watch on the FD and exits.
When getting EOF from a read() on the PTY, the existing code
would do waitpid(WNOHANG) to see if the container had exited.
Unfortunately there is a race condition, because even though
the process has closed its stdio handles, it might still
exist.
To deal with this the new event loop uses a SIG_CHILD handler
to perform the waitpid only when the container is known to
have actually exited.
* src/lxc/lxc_controller.c: Rewrite the event loop to use
the standard APIs.
qemuBuildVirtioSerialPortDevStr was mistakenly accessing the
target.name field in the virDomainChrDef object for chardevs
belonging to a console. Those chardevs only have port set,
and if there's > 1 console, the > 1port number results in
trying to access a target.name with address 0x1
* src/qemu/qemu_command.c: Fix target.name handling and
make code more robust wrt error reporting
* src/qemu/qemu_command.c: Conditionally access target.name
While Xen only has a single paravirt console, UML, and
QEMU both support multiple paravirt consoles. The LXC
driver can also be trivially made to support multiple
consoles. This patch extends the XML to allow multiple
<console> elements in the XML. It also makes the UML
and QEMU drivers support this config.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Allow
multiple <console> devices
* src/lxc/lxc_driver.c, src/xen/xen_driver.c,
src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c: Update for
internal API changes
* src/security/security_selinux.c, src/security/virt-aa-helper.c:
Only label consoles that aren't a copy of the serial device
* src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
src/qemu/qemu_process.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Support multiple console devices
* tests/qemuxml2xmltest.c, tests/qemuxml2argvtest.c: Extra
tests for multiple virtio consoles. Set QEMU_CAPS_CHARDEV
for all console /channel tests
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args,
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args
tests/qemuxml2argvdata/qemuxml2argv-console-virtio.args: Update
for correct chardev syntax
* tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.args,
tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.xml: New
test file
Allow the user to call with nparams too small, per API documentation.
* src/xen/xen_hypervisor.c (xenHypervisorGetSchedulerParameters):
Allow fewer than max.
* src/xen/xend_internal.c (xenDaemonGetSchedulerParameters):
Likewise.
libvirt.c guarantees that nparams is non-zero for scheduler parameters.
* src/test/test_driver.c (testDomainGetSchedulerParamsFlags): Drop
redundant check. Avoid strcpy.
Allow the user to call with nparams too small, per API documentation.
Also, libvirt.c filters out nparams of 0 for scheduler parameters.
* src/lxc/lxc_driver.c (lxcDomainGetMemoryParameters): Allow fewer
than max.
(lxcGetSchedulerParametersFlags): Drop redundant check.
Allow the user to call with nparams too small, per API documentation.
* src/libxl/libxl_driver.c
(libxlDomainGetSchedulerParametersFlags): Allow fewer than max.
Allow the user to call with nparams too small, per API documentation.
* src/esx/esx_driver.c (esxDomainGetMemoryParameters): Drop
redundant check.
(esxDomainGetSchedulerParametersFlags): Allow fewer than max.
Document the parameter names that will be used by
virDomain{Get,Set}SchedulerParameters{,Flags}, rather than
hard-coding those names in each driver, to match what is
done with memory, blkio, and blockstats parameters.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SCHEDULER_CPU_SHARES)
(VIR_DOMAIN_SCHEDULER_VCPU_PERIOD)
(VIR_DOMAIN_SCHEDULER_VCPU_QUOTA, VIR_DOMAIN_SCHEDULER_WEIGHT)
(VIR_DOMAIN_SCHEDULER_CAP, VIR_DOMAIN_SCHEDULER_RESERVATION)
(VIR_DOMAIN_SCHEDULER_LIMIT, VIR_DOMAIN_SCHEDULER_SHARES): New
field name macros.
* src/qemu/qemu_driver.c (qemuSetSchedulerParametersFlags)
(qemuGetSchedulerParametersFlags): Use new defines.
* src/test/test_driver.c (testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters): Likewise.
* src/xen/xend_internal.c (xenDaemonGetSchedulerParameters)
(xenDaemonSetSchedulerParameters): Likewise.
* src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags)
(lxcGetSchedulerParametersFlags): Likewise.
* src/esx/esx_driver.c (esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
The field 'mon' in 'struct tm' gives months 0-11, where as
humans tend to expect months 1-12. Thus the month number
needing adjusting by 1
* src/util/logging.c: Use human friendly month number
commit 27908453 introduces a regression, and it will
cause libvirt crashed when starting network.
The reason is that tapfd may be NULL, but we dereference
it without checking whether it is NULL.
Since all virTypedParameter APIs allow us to return the number
of slots we actually populated, we should allow the user to
call with nparams too small (without overrunning their array)
or too large (ignoring the tail of the array that we can't fill),
rather than requiring that they get things exactly right.
Making this change will make it easier for a future patch to
introduce VIR_TYPED_PARAM_STRING, with filtering in libvirt.c
rather than in every single driver, since users already have
to be prepared for *nparams to be smaller on exit than on entry.
* src/qemu/qemu_driver.c (qemuDomainGetBlkioParameters)
(qemuDomainGetMemoryParameters): Allow variable nparams on entry.
(qemuGetSchedulerParametersFlags): Drop redundant check.
(qemudDomainBlockStats, qemudDomainBlockStatsFlags): Rename...
(qemuDomainBlockStats, qemuDomainBlockStatsFlags): ...to this.
Don't return unavailable stats.
virDomainBlockStatsFlags was missing a check that was present in
virDomainGetMemoryParameters. Additionally, I found that the
existing descriptions were a bit hard to read. A later patch
will fix qemu to return fewer than max parameters if @nparams
was too small on input.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainGetBlkioParameters, virDomainGetSchedulerParameters)
(virDomainGetSchedulerParametersFlags):
Tweak documentation wording.
(virDomainBlockStatsFlags): Likewise, and add sanity check.
If an LXC VM fails to start, quite a few cleanup paths will
result in the original error message being overwritten. Some
other cleanup paths also forgot to actually terminate the VM.
* src/lxc/lxc_driver.c: Ensure VM is terminated on startup
failure and preserve original error
The LXC code for mounting container filesystems from block devices
tries all filesystems in /etc/filesystems and possibly those in
/proc/filesystems. The regular mount binary, however, first tries
using libblkid to detect the format. Add support for doing the same
in libvirt, since Fedora's /etc/filesystems is missing many formats,
most notably ext4 which is the default filesystem Fedora uses!
* src/Makefile.am: Link libvirt_lxc to libblkid
* src/lxc/lxc_container.c: Probe filesystem format with libblkid
If we looped through /etc/filesystems trying to mount with each
type and failed all options, we forget to actually raise an
error message.
* src/lxc/lxc_container.c: Raise error if unable to detect
the filesystems. Also fix existing error message
The kernel automounter is mostly broken wrt to containers. Most
notably if you start a new filesystem namespace and then attempt
to unmount any autofs filesystem, it will typically fail with a
weird error message like
Failed to unmount '/.oldroot/sys/kernel/security':Too many levels of symbolic links
Attempting to detach the autofs mount using umount2(MNT_DETACH)
will also fail with the same error. Therefore if we get any error on
unmount()ing a filesystem from the old root FS when starting a
container, we must immediately break out and detach the entire
old root filesystem (ignoring any mounts below it).
This has the effect of making the old root filesystem inaccessible
to anything inside the container, but at the cost that the mounts
live on in the kernel until the container exits. Given that SystemD
uses autofs by default, we need LXC to be robust this scenario and
thus this tradeoff is worthwhile.
* src/lxc/lxc_container.c: Detach root filesystem if any umount
operation fails.
The /etc/filesystems file can contain a '*' on the last line to
indicate that /proc/filessystems should be tried next. We have
a check that this '*' only occurs on the last line. Unfortunately
when we then start reading /proc/filesystems, we mistakenly think
we've seen '*' in /proc/filesystems and fail
* src/lxc/lxc_container.c: Skip '*' validation when we're reading
/proc/filesystems
Only some of the return paths of lxcContainerWaitForContinue will
have set errno. In other paths we need to set it manually to avoid
the caller getting a random stale errno value
* src/lxc/lxc_container.c: Set errno in lxcContainerWaitForContinue
We already have a /var/lib/libvirt/images for OS install images.
We need a separate /var/lib/libvirt/filesystems for OS install
trees, since SELinux labelling will be different
* libvirt.spec.in: Add /var/lib/libvirt/filesystems
* src/Makefile.am: Create /var/lib/libvirt/filesystems
Allow the datacenter and compute resource parts of the path
to be prefixed with folders. Therefore, the way the path is
parsed has changed. Before, it was split in 2 or 3 items and
the items' meanings were determined by their positions. Now
the path can have 2 or more items and the the vCenter server
is asked whether a folder, datacenter of compute resource
with the specified name exists at the current hierarchy level.
Before the datacenter and compute resource lookup automatically
traversed folders during lookup. This is logic got removed
and folders have to be specified explicitly.
The proper datacenter path including folders is now used when
accessing a datastore over HTTPS. This makes virsh dumpxml
and define work for datacenters in folders.
https://bugzilla.redhat.com/show_bug.cgi?id=732676
with /etc/libvirt/libvirt.conf below:
uri_aliases = [
"hail=qemu:///system",
"sleet=qemu+ssh://root 9 115 122 57/system",
"sam=qemu+unix:///system?socket=/var/run/libvirt/libvirt-sock",
]
Neither "virsh -c hailly" nor "hai" should result in matching "hail=qemu:///system"
Fix URI alias prefix matching when connecting
Signed-off-by: Wen Ruo Lv <lvroyce@linux.vnet.ibm.com>
If daemon is using SASL it reads client data into a cache. This cache is
big (usually 65KB) and can thus contain 2 or more messages. However,
on socket event we can dispatch only one message. So if we read two
messages at once, the second will not be dispatched as the socket event
goes away with filling the cache.
Moreover, when dispatching the cache we need to remember to take care
of client max requests limit.
If we are comparing storage pools we must skip comparing with
ourself, so that re-defining an existing pool works
* conf/storage_conf.c: Skip self when comparing
The qemu RBD driver needs access to the conn in order to get the secret
needed for connecting to the ceph cluster.
Signed-off-by: Sage Weil <sage@newdream.net>
To support "managed" mode of host PCI device, we record the original
states (unbind_from_stub, remove_slot, and reprobe) so that could
reattach the device to host with original driver. But there is no XML
for theses attrs, and thus after daemon is restarted, we lose the
original states. It's easy to reproduce:
1) virsh start domain
2) virsh attach-device dom hostpci.xml (in 'managed' mode)
3) service libvirtd restart
4) virsh destroy domain
You will see the device won't be bound to the original driver
if there was one.
This patch is to solve the problem by introducing internal XML
(won't be dumped to user, only dumped to status XML). The XML is:
<origstates>
<unbind/>
<remove_slot/>
<reprobe/>
</origstates>
Which will be child node of <hostdev><source>...</souce></hostdev>.
(only for PCI device).
A new struct "virDomainHostdevOrigStates" is introduced for the XML,
and the according members are updated when preparing the PCI device.
And function "qemuUpdateActivePciHostdevs" is modified to honor
the original states. Use of qemuGetPciHostDeviceList is removed
in function "qemuUpdateActivePciHostdevs", and the "managed" value of
the device config is honored by the change. This fixes another problem
alongside:
qemuGetPciHostDeviceList set the device as "managed" force
regardless of whether the device is configured as "managed='yes'"
or not in XML, which is not right.
Deal with the incompatible changes in the VirtualBox 4.1 API.
INetworkAdapter has its different AttachTo* method replaced by
a settable attachmentType property.
The maximum number of network adapters is now requestable per
chipset type.
The OpenMedium method got a bool parameter to request opening
a medium under a new IID.
privP->session->error_description is a list and in order to get the
complete error message all parts of the list should be concatenated.
xenapiSessionErrorHandler does this when its third parameter is NULL.
The current code discards all but the first part of the error message
resulting in a potentially incomplete error message.
This partly reverts 006be75ee2, that tried to avoid reporting
a (null) in the error message. The actual problem is more general in
returnErrorFromSession that might return NULL if there is no error.
Make sure that returnErrorFromSession return non-NULL always. Also
don't skip the last error message part.
- changed some return 1's to return -1
- changed if (rc) error checks to if (rc < 0)
- fixed some other minor convention violations
I might have missed some. Can fix in another patch or can respin
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Reported-by: Eric Blake <eblake@redhat.com>
Reported-by: Laine Stump <laine@laine.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
When using the xml as below:
------------------------------------------------------
<devices>
<emulator>/home/soulxu/data/work-code/qemu-kvm/x86_64-softmmu/qemu-system-x86_64</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='/home/soulxu/data/VM/images/linux.img'/>
<target dev='vda' bus='virtio'/>
<address type='drive' controller='0' bus='0' unit='0'/>
</disk>
<input type='mouse' bus='ps2'/>
<graphics type='vnc' port='-1' autoport='yes'/>
<video>
<model type='cirrus' vram='9216' heads='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</memballoon>
</devices>
------------------------------------------------------
Then can't startup qemu, the error message as below:
virsh # start test-vm
error: Failed to start domain test-vm
error: internal error process exited while connecting to monitor: qemu-system-x86_64: -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3: PCI: slot 3 function 0 not available for virtio-balloon-pci, in use by virtio-blk-pci
qemu-system-x86_64: -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3: Device 'virtio-balloon-pci' could not be initialized
So adding check for bus type and address type. Only the address of pci type support by virtio bus.
Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
Add additional fields to let you specify the how to authenticate with a disk.
The secret to use may be referenced by a usage string or a UUID, i.e.:
<auth username='myuser'>
<secret type='ceph' usage='secretname'/>
</auth>
or
<auth username='myuser'>
<secret type='ceph' uuid='0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f'/>
</auth>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Add a new secret type to store a Ceph authentication key. The name
is simply an identifier for easy human reference.
The xml looks like this:
<secret ephemeral='no' private='no'>
<uuid>0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f</uuid>
<usage type='ceph'>
<name>mycluster_admin</name>
</usage>
</secret>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.net>
Leak introduced in commit c1bc3d89.
Detected by valgrind:
==18462== 1,100 bytes in 1 blocks are definitely lost in loss record 183 of 184
==18462== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==18462== by 0x4A06167: realloc (vg_replace_malloc.c:525)
==18462== by 0x4AADBB: virReallocN (memory.c:161)
==18462== by 0x4A975E: virBufferGrow (buf.c:117)
==18462== by 0x4A9D92: virBufferVasprintf (buf.c:290)
==18462== by 0x4A9EF7: virBufferAsprintf (buf.c:263)
==18462== by 0x429488: qemuBuildControllerDevStr (qemu_command.c:1993)
==18462== by 0x42C4B6: qemuBuildCommandLine (qemu_command.c:3803)
==18462== by 0x41A604: testCompareXMLToArgvHelper (qemuxml2argvtest.c:124)
==18462== by 0x41BB81: virtTestRun (testutils.c:141)
==18462== by 0x416DFF: mymain (qemuxml2argvtest.c:369)
==18462== by 0x41B277: virtTestMain (testutils.c:696)
==18462==
==18462== LEAK SUMMARY:
==18462== definitely lost: 1,100 bytes in 1 blocks
==18462== indirectly lost: 0 bytes in 0 blocks
* src/qemu/qemu_command.c (qemuBuildCommandLine): Clean up on success.
Signed-off-by: Alex Jia <ajia@redhat.com>
Detected by Coverity. The fix in 2c27dfa didn't catch all bad
instances of memcpy(). Thankfully, on further analysis, all of
the problematic uses are only triggered by old qemu that lacks
-device.
* src/qemu/qemu_hotplug.c (qemuDomainAttachPciDiskDevice)
(qemuDomainAttachNetDevice, qemuDomainAttachHostPciDevice): Init
all fields since monitor only populates some of them.
Since it needs to access file descriptors passed in the msg,
the RPC driver for virDomainOpenGraphics needs to be manually
implemented.
* daemon/remote.c: RPC server dispatcher
* src/remote/remote_driver.c: RPC client dispatcher
* src/remote/remote_protocol.x: Define protocol
The RPC server classes are extended to allow FDs to be received
from clients with calls. There is not currently any way for a
procedure to pass FDs back to the client with replies
* daemon/remote.c, src/rpc/gendispatch.pl: Change virNetMessageHeaderPtr
param to virNetMessagePtr in dispatcher impls
* src/rpc/virnetserver.c, src/rpc/virnetserverclient.c,
src/rpc/virnetserverprogram.c, src/rpc/virnetserverprogram.h:
Extend to support FD passing
Extend the RPC client code to allow file descriptors to be sent
to the server with calls, and received back with replies.
* src/remote/remote_driver.c: Stub extra args
* src/libvirt_private.syms, src/rpc/virnetclient.c,
src/rpc/virnetclient.h, src/rpc/virnetclientprogram.c,
src/rpc/virnetclientprogram.h: Extend APIs to allow
FD passing
Define two new RPC message types VIR_NET_CALL_WITH_FDS and
VIR_NET_REPLY_WITH_FDS. These message types are equivalent
to VIR_NET_CALL and VIR_NET_REPLY, except that between the
message header, and payload there is a 32-bit integer field
specifying how many file descriptors have been passed.
The actual file descriptors are sent/recv'd out of band.
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h,
src/libvirt_private.syms: Add support for handling
passed file descriptors
* src/rpc/virnetprotocol.x: Extend protocol for FD
passing
Add APIs to the virNetSocket object, to allow file descriptors
to be sent/received over UNIX domain socket connections
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h,
src/libvirt_private.syms: Add APIs for FD send/recv
The QEMU monitor command 'add_client' can be used to connect to
a VNC or SPICE graphics display. This allows for implementation
of the virDomainOpenGraphics API
* src/qemu/qemu_driver.c: Implement virDomainOpenGraphics
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Add binding for 'add_client' command
Not all VNC/SPICE servers use a TCP socket for their connections.
It is possible to configure a UNIX socket server. The graphics
event must thus include a UNIX socket address type.
* include/libvirt/libvirt.h.in: Add UNIX socket address type
for graphics event
* src/qemu/qemu_monitor_json.c: Add 'unix' string to address
type enum
The virDomainOpenGraphics API allows a libvirt client to pass in
a file descriptor for an open socket pair, and get it connected
to the graphics display of the guest. This is limited to working
with local libvirt hypervisors connected over a UNIX domain
socket, since it will use UNIX FD passing
* include/libvirt/libvirt.h.in: Define virDomainOpenGraphics
* src/driver.h: Define driver for virDomainOpenGraphics
* src/libvirt_public.syms, src/libvirt.c: Entry point for
virDomainOpenGraphics
* src/libvirt_internal.h: VIR_DRV_FEATURE_FD_PASSING
This refactors the TAP creation code out of brAddTap into a new
function brCreateTap to allow it to be used on its own. I have also
changed ifSetInterfaceMac to brSetInterfaceMac and exported it since
it is will be needed by code outside of util/bridge.c in the next
patch.
AUTHORS | 1 +
src/libvirt_bridge.syms | 2 +
src/util/bridge.c | 116 +++++++++++++++++++++++++++++++----------------
src/util/bridge.h | 9 ++++
4 files changed, 89 insertions(+), 39 deletions(-)
Every time we write XML into a file we call virEmitXMLWarning to write a
warning that the file is automatically generated. virXMLSaveFile
simplifies this into a single step and makes rewriting existing XML file
safe by using virFileRewrite internally.
When saving config files we just overwrite old content of the file. In
case something fails during that process (e.g. disk gets full) we lose
both old and new content. This patch makes the process more robust by
writing the new content into a separate file and only if that succeeds
the original file is atomically replaced with the new one.
This change adds some systemtap/dtrace probes to the QEMU monitor
client code. In particular it allows watching of all operations
for a VM
* examples/systemtap/qemu-monitor.stp: Watch all monitor commands
* src/Makefile.am: Passing libdir/bindir/sbindir to dtrace2systemtap.pl
* src/dtrace2systemtap.pl: Accept libdir/bindir/sbindir as args
and look for '# binary:' comment to mark probes against libvirtd
vs libvirt.so
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
src/qemu/qemu_monitor_text.c: Add probes for key functions
Previous commit clears number of items alocated in lxcSetupLoopDevices
if VIR_REALLOC_N fails. In that case, the pointer is not NULL, and
causes leaking FDs that have been allocated.
* src/lxc/lxc_controller.c: revert zeroing array size
If the function lxcSetupLoopDevices(def, &nloopDevs, &loopDevs) failed,
the variable loopDevs will keep a initial NULL value, however, the
function VIR_FORCE_CLOSE(loopDevs[i]) will directly deref it.
This patch also fixes returning a bogous number of devices from
lxcSetupLoopDevices on an error path.
* rc/lxc/lxc_controller.c: fixed a null pointer dereference.
Signed-off-by: Alex Jia <ajia@redhat.com>
Cppcheck detected a syntaxError on lxcDomainInterfaceStats.
* src/lxc/lxc_driver.c: fixed missing '{' in the function lxcDomainInterfaceStats.
Signed-off-by: Alex Jia <ajia@redhat.com>
Rather than making all clients of monitor commands that are JSON-only
check whether yajl support was compiled in, it is simpler to just
avoid setting the capability bit up front if we can't use the capability.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Only set
capability bit if we also have yajl library to use it.
* src/qemu/qemu_driver.c (qemuDomainReboot): Drop #ifdefs.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* tests/qemuhelptest.c (testHelpStrParsing): Pass test even
without yajl.
* tests/qemuxml2argvtest.c (mymain): Simplify use of json flag.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-error-*.args:
Update expected results to match.
Break some long lines, and use more efficient functions when possible,
such as relying on virBufferEscapeString to skip output on a NULL arg.
Ensure that output does not embed newlines, since auto-indent won't
work in those situations.
* src/conf/domain_conf.c (virDomainTimerDefFormat): Break output lines.
(virDomainDefFormatInternal, virDomainDiskDefFormat)
(virDomainActualNetDefFormat, virDomainNetDefFormat)
(virDomainHostdevDefFormat): Minor cleanups.
Fixing this involved some refactoring of common code out of
domain_conf and nwfilter_conf into nwfilter_params.
* src/conf/nwfilter_params.h (virNWFilterFormatParamAttributes):
Adjust signature.
* src/conf/nwfilter_params.c (_formatParameterAttrs)
(virNWFilterFormatParamAttributes): Adjust indentation handling,
and handle filterref here.
(formatterParam): Delete unused struct.
* src/conf/domain_conf.c (virDomainNetDefFormat): Adjust caller.
* src/conf/nwfilter_conf.c (virNWFilterIncludeDefFormat): Likewise.
Detected by Coverity. Only possible if qemu-img gives bogus output,
but we might as well be robust.
* src/storage/storage_backend.c
(virStorageBackendQEMUImgBackingFormat): Check for strstr failure.
If a disk source gets dropped because it is not accessible,
mgmt application might want to be informed about this. Therefore
we need to emit an event. The event presented in this patch
is however a bit superset of what written above. The reason is simple:
an intention to be easily expanded, e.g. on 'user ejected disk
in guest' events. Therefore, callback gets source string and disk alias
(which should be unique among a domain) and reason (an integer);
This patch implements on_missing feature in qemu driver.
Upon qemu startup process an accessibility of CDROMs
and floppy disks is checked. The source might get dropped
if unavailable and on_missing is set accordingly.
No event is emit thought. Look for follow up patch.
This patch is rather cosmetic as it only moves device alias
assignation from command line construction just before that.
However, it is needed in connotation of previous and next patch.
This attribute says what to do with cdrom (or floppy) if
the source is missing. It accepts:
- mandatory - fail if missing for any reason (the default)
- requisite - fail if missing on boot up, drop if missing on
migrate/restore/revert
- optional - drop if missing at any start attempt.
However, this patch introduces only XML part of this new
functionality.
Splitting into two functions allows the user to call the right
function, rather than having to remember that a *Free function is
an exception to the rule.
* src/conf/storage_conf.h (virStoragePoolSourceClear): New function.
* src/libvirt_private.syms (storage_conf.h): Export it.
* src/conf/storage_conf.c (virStoragePoolSourceFree): Split...
(virStoragePoolSourceClear): ...into new function.
(virStoragePoolDefFree, virStoragePoolDefParseSourceString):
Update callers.
* src/test/test_driver.c (testStorageFindPoolSources): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemNetFindPoolSourcesFunc)
(virStorageBackendFileSystemNetFindPoolSources): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalFindPoolSources): Likewise.
Detected by Coverity. virStoragePoolSourceFree does not free the
actual passed-in pointer. A bigger patch would be to rename it
virStoragePoolSourceClear to match behavior, or even split it into
two functions depending on needed behavior; but this is the minimal
fix to the one location out of eight that leaked memory.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Free memory.
Based on a report by Coverity. waitpid() can leak resources if it
fails with EINTR, so it should never be used without checking return
status. But we already have a helper function that does that, so
use it in more places.
* src/lxc/lxc_container.c (lxcContainerAvailable): Use safer
virWaitPid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput, virtTestMain):
Likewise.
* src/libvirt.c (virConnectAuthGainPolkit): Simplify with virCommand.
Detected by Coverity. Both text and JSON monitors set only the
bus and unit fields, which means driveAddr.controller spends
life as garbage on the stack, and is then memcpy()'d into the
in-memory representation which the user can see via dumpxml.
* src/qemu/qemu_hotplug.c (qemuDomainAttachSCSIDisk): Only copy
defined fields.
More simplifications possible due to auto-indent. Also,
<bandwidth> within <actual> was only using 6 instead of 8 spaces.
* src/util/network.h (virVirtualPortProfileFormat)
(virBandwidthDefFormat): Alter signature.
* src/util/network.c (virVirtualPortProfileFormat)
(virBandwidthDefFormat): Alter indentation.
(virBandwidthChildDefFormat): Tweak to make use easier.
* src/conf/network_conf.c (virPortGroupDefFormat)
(virNetworkDefFormat): Adjust callers.
* src/conf/domain_conf.c (virDomainNetDefFormat): Likewise.
(virDomainActualNetDefFormat): Likewise, and fix bandwidth
indentation.
Auto-indent makes life a bit easier; this patch also drops unused
arguments and replaces a misspelled flag name with two entry points
instead, so that callers don't have to worry about how much spacing
is present when embedding cpu elements.
* src/conf/cpu_conf.h (virCPUFormatFlags): Delete.
(virCPUDefFormat): Drop unused argument.
(virCPUDefFormatBuf): Alter signature.
(virCPUDefFormatBufFull): New prototype.
* src/conf/cpu_conf.c (virCPUDefFormatBuf): Split...
(virCPUDefFormatBufFull): ...into new function.
(virCPUDefFormat): Adjust caller.
* src/conf/domain_conf.c (virDomainDefFormatInternal): Likewise.
* src/conf/capabilities.c (virCapabilitiesFormatXML): Likewise.
* src/cpu/cpu.c (cpuBaselineXML): Likewise.
* tests/cputest.c (cpuTestCompareXML): Likewise.
The improvements to virBuffer, along with a paradigm shift to pass
the original buffer through rather than creating a second buffer,
allow us to shave off quite a few lines of code.
* src/util/sysinfo.h (virSysinfoFormat): Alter signature.
* src/util/sysinfo.c (virSysinfoFormat, virSysinfoBIOSFormat)
(virSysinfoSystemFormat, virSysinfoProcessorFormat)
(virSysinfoMemoryFormat): Change indentation parameter.
* src/conf/domain_conf.c (virDomainSysinfoDefFormat): Adjust
caller.
* src/qemu/qemu_driver.c (qemuGetSysinfo): Likewise.
Add a test for the simple parts of my indentation changes, and
fix the fallout.
* tests/domainsnapshotxml2xmltest.c: New test.
* tests/Makefile.am (domainsnapshotxml2xmltest_SOURCES): Build it.
* src/conf/domain_conf.c (virDomainSnapshotDefFormat): Avoid NULL
deref, match documented order.
* src/conf/domain_conf.h (virDomainSnapshotDefFormat): Add const.
* tests/domainsnapshotxml2xmlout/all_parameters.xml: Tweak output.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Likewise.
* tests/domainsnapshotxml2xmlout/full_domain.xml: Likewise.
* .gitignore: Exempt new binary.
<domainsnapshot> is the first public instance of <domain> being
used as a sub-element, although we have two other private uses
(runtime state, and migration cookie). Although indentation has
no effect on XML parsing, using it makes the output more consistent.
This uses virBuffer auto-indentation to obtain the effect, for all
but the portions of <domain> that are not generated a line at a
time into the same virBuffer. Further patches will clean up the
remaining problems.
* src/conf/domain_conf.h (virDomainDefFormatInternal): New prototype.
* src/conf/domain_conf.c (virDomainDefFormatInternal): Export.
(virDomainObjFormat, virDomainSnapshotDefFormat): Update callers.
* src/libvirt_private.syms (domain_conf.h): Add new export.
* src/qemu/qemu_migration.c (qemuMigrationCookieXMLFormat): Use
new function.
(qemuMigrationCookieXMLFormatStr): Update caller.
Rather than having to adjust all callers in a chain to deal with
indentation, it is nicer to have virBuffer do auto-indentation.
* src/util/buf.h (_virBuffer): Increase size.
(virBufferAdjustIndent, virBufferGetIndent): New prototypes.
* src/libvirt_private.syms (buf.h): Export new functions.
* src/util/buf.c (virBufferAdjustIndent, virBufferGetIndent): New
functions.
(virBufferSetError, virBufferAdd, virBufferAddChar)
(virBufferVasprintf, virBufferStrcat, virBufferURIEncodeString):
Implement auto-indentation.
* tests/virbuftest.c (testBufAutoIndent): Test it.
(testBufInfiniteLoop): Don't rely on internals.
Idea by Daniel P. Berrange.
The next patch wants to add some sanity checking, which would
be a different error than ENOMEM. Many existing callers blindly
report OOM failure if virBuf reports an error, and this will be
wrong in the (unlikely) case that they actually had a usage error
instead; but since the most common error really is ENOMEM, I'm
not going to fix all callers. Meanwhile, new discriminating
callers can react differently depending on what failure happened.
* src/util/buf.c (virBufferSetError): Add parameter.
(virBufferGrow, virBufferVasprintf, virBufferEscapeString)
(virBufferEscapeSexpr, virBufferEscapeShell): Adjust callers.
Although the compiler wasn't complaining (since it was the pointer,
rather than what was being pointed to, that was actually const), it
looks quite suspicious to call a function with an argument labeled
const when the nature of the pointer (virBufferPtr) is hidden behind
a typedef. Dropping const makes the function declarations easier
to read.
* src/util/buf.h: Drop const from all functions that modify buffer
argument.
* src/util/buf.c (virBufferSetError, virBufferAdd)
(virBufferContentAndReset, virBufferFreeAndReset)
(virBufferAsprintf, virBufferVasprintf, virBufferEscapeString)
(virBufferEscapeSexpr, virBufferEscape): Fix fallout.
There is a little difference between the output of domxml-to-native and the actual commandline.
No matter qemu is in control or readline mode, domxml-to-native always converts it to readline mode.
That is because the parameter "monitor_json" for qemuBuildCommandLine() is always set to false
in qemuDomainXMLToNative().
Signed-off-by: tangchen <tangchen@cn.fujitsu.com>
The glibc ones (intentionally) cannot handle ptys opened in a
devpts not mounted at /dev/pts.
Drop the (un-exported, unused) virFileOpenTtyAt.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The XML parser for the qemu specific extensions expects the qemu name-space
to be bound to the 'qemu' prefix. This is too strict, since the name of the
name-space-prefix is only meant as an internal lookup key. Only the associated
URI is relevant.
<domain>...
<qemu:commandline xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0">
...</qemu:commandline>
</domain>
<domain xmlns:ns0="http://libvirt.org/schemas/domain/qemu/1.0">...
<ns0:commandline>
...</ns0:commandline>
</domain>
<domain xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0">
<qemu:commandline xmlns:qemu="urn:foo">
...</qemu:commandline>
</domain>
Remove the test for checking the name-space binding on the top-level <domain>
element. Registering the name-space with XPath is enough.
Signed-off-by: Philipp Hahn <hahn@univention.de>
When I compile libvirt with gcc-4.6.1 in ubuntu 11.10, got error as below:
CCLD libvirtd
/usr/bin/ld: ../src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_migration.o): undefined reference to symbol 'gnutls_x509_crt_get_dn@@GNUTLS_1_4'
/usr/bin/ld: note: 'gnutls_x509_crt_get_dn@@GNUTLS_1_4' is defined in DSO /usr/lib/x86_64-linux-gnu/libgnutls.so so try adding it to the linker command line
/usr/lib/x86_64-linux-gnu/libgnutls.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[3]: *** [libvirtd] Error 1
It can compile with gcc-4.5.2 in ubuntu 11.04, but it can not compile with gcc-4.6.1 in ubuntu 11.10.
I didn't find reason. Does Anyone know the reason or the different between gcc-4.5.2 and gcc-4.6.1?
I still provide a patch for this. Just make it is working now.
Signed-off-by: soulxu <soulxu@soulxu-ThinkPad-T410.(none)>
This adds support for a libvirt client configuration file
either /etc/libvirt/libvirt.conf for privileged clients,
or $HOME/.libvirt/libvirt.conf for unprivileged clients.
It allows one parameter
uri_aliases = [
"hail=qemu+ssh://root@hail.cloud.example.com/system",
"sleet=qemu+ssh://root@sleet.cloud.example.com/system",
]
Any call to virConnectOpen with a non-NULL URI will first
attempt to match against the uri_aliases list. An application
can disable this by using VIR_CONNECT_NO_ALIASES
* docs/uri.html.in: Document URI aliases
* include/libvirt/libvirt.h.in: Add VIR_CONNECT_NO_ALIASES
* libvirt.spec.in, mingw32-libvirt.spec.in: Add /etc/libvirt/libvirt.conf
* src/Makefile.am: Install default config file
* src/libvirt.c: Add support for URI aliases
* src/remote/remote_driver.c: Don't try to handle URIs
with no scheme and which clearly are not paths
* src/util/conf.c: Don't raise error on virConfFree(NULL)
* src/xen/xen_driver.c: Don't raise error on URIs
with no scheme
We recently added support for VIR_DOMAIN_START_AUTODESTROY and
an impl to the QEMU driver. It is very desirable to support in
other drivers, so this adds it to LXC and UML
* src/lxc/lxc_conf.h, src/lxc/lxc_driver.c,
src/uml/uml_conf.h, src/uml/uml_driver.c: Wire up autodestroy
functions
Noticed when testing new libvirt against old qemu that lacked the
snapshot_blkdev HMP command. Libvirt was mistakenly treating the
command as successful, and re-writing the domain XML to use the
just-created 0-byte file, rendering the domain broken on restart.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextDiskSnapshot):
Notice another possible error message.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Don't keep 0-byte file
on failure.
compile error:
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuPrepareHostdevPCIDevices':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:183: undefined reference to `pciDeviceListFind'
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:230: undefined reference to `pciDeviceListFind'
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuGetActivePciHostDeviceList':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:102: undefined reference to `pciDeviceListFind'
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuDomainReAttachHostdevDevices':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:370: undefined reference to `pciDeviceListFind'
Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
probes.h is generated in build directory; setting a dependency on
probes.h from source directory doesn't work well in VPATH builds. Caused
by commit 1afcfbdda0
When I run 'make dist', I receive the following error messages:
make[1]: Entering directory `/home/wency/source/libvirt/src'
GEN remote/remote_protocol.h
GEN remote/remote_protocol.c
GEN remote/qemu_protocol.h
GEN remote/qemu_protocol.c
GEN remote/qemu_client_bodies.h
CC libvirt_driver_remote_la-remote_protocol.lo
In file included from ./remote/remote_protocol.h:16,
from ./remote/remote_protocol.c:7:
/internal.h:249:23: error: probes.h: No such file or directory
make[1]: *** [libvirt_driver_remote_la-remote_protocol.lo] Error 1
make[1]: Leaving directory `/home/wency/source/libvirt/src'
make: *** [distdir] Error 1
The reason is that we use probes.h before generating it.
BZ# https://bugzilla.redhat.com/show_bug.cgi?id=736214
The problem is caused by the original info of domain's PCI dev is
maintained by qemu_driver->activePciHostdevs list, (E.g. dev->reprobe,
which stands for whether need to reprobe driver for the dev when do
reattachment). The fields (dev->reprobe, dev->unbind_from_stub, and
dev->remove_slot) are initialized properly when preparing the PCI
device for managed attachment. However, when do reattachment, it
construct a complete new "pciDevice" without honoring the original
dev info, and thus the dev won't get the original driver or can get
other problem.
This patch is to fix the problem by get the devs from list
driver->activePciHostdevs.
Tested with following 3 scenarios:
* the PCI was bound to some driver not pci-stub before attaching
result: the device will be bound to the original driver
* the PCI was bound to pci-stub before attaching
result: no driver reprobing, and still bound to pci-stub
* The PCI was not bound to any driver
result: no driver reprobing, and still not bound to any driver.
Commit 0472f39 plugged a leak, but introduced another bug:
Actually looks like physfndev is conditionally allocated in getPhysfnDev
Its better to modify getPhysfnDev to allocate physfndev every time.
When failing on starting a domain, it tries to reattach all the PCI
devices defined in the domain conf, regardless of whether the devices
are still used by other domain. This will cause the devices to be deleted
from the list qemu_driver->activePciHostdevs, thus the devices will be
thought as usable even if it's not true. And following commands
nodedev-{reattach,reset} will be successful.
How to reproduce:
1) Define two domains with same PCI device defined in the confs.
2) # virsh start domain1
3) # virsh start domain2
4) # virsh nodedev-reattach $pci_device
You will see the device will be reattached to host successfully.
As pciDeviceReattach just check if the device is still used by
other domain via checking if the device is in list driver->activePciHostdevs,
however, the device is deleted from the list by step 2).
This patch is to prohibit the bug by:
1) Prohibit a domain starting or device attachment right at
preparation period (qemuPrepareHostdevPCIDevices) if the
device is in list driver->activePciHostdevs, which means
it's used by other domain.
2) Introduces a new field for struct _pciDevice, (const char *used_by),
it will be set as the domain name at preparation period,
(qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting
the device from driver->activePciHostdevs if it's still used by
other domain when stopping the domain process.
* src/pci.h (define two internal functions, pciDeviceSetUsedBy and
pciDevceGetUsedBy)
* src/pci.c (new field "const char *used_by" for struct _pciDevice,
implementations for the two new functions)
* src/libvirt_private.syms (Add the two new internal functions)
* src/qemu_hostdev.h (Modify the definition of functions
qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices)
* src/qemu_hostdev.c (Prohibit preparation and don't delete the
device from activePciHostdevs list if it's still used by other domain)
* src/qemu_hotplug.c (Update function usage, as the definitions are
changed)
Signed-off-by: Eric Blake <eblake@redhat.com>
virInitialize() → xenRegister() → xenhypervisorInit() determines the
version of the Hypervisor. This breaks xencapstest when building as root
on a dom0 system, since xenHypervisorBuildCapabilities() adds the "hap"
and "viridian" features based on the detected version.
Add an optional parameter to xenhypervisorInit() to disable automatic
detection of the Hypervisor version. The passed in arguments are used
instead.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Calling virInitialize() → xenRegister() → xenhypervisorInit() directly
opens a connection to the Xen Hypervisor, which breaks some unit tests.
Move all static variables into a struct to make it easier to override
them when testing.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Coverity detected that the only way to get to the cleanup label
is if objectSpec had been successfully allocated, so the null
check was dead code.
* src/esx/esx_vi.c (esxVI_LookupObjectContentByType): Drop
redundant null check.
Detected by Coverity. Leak present since commit 874e65a; and
while commit d50bb45 tried to fix the issue, it missed a path.
* src/conf/domain_conf.c (virDomainDefParseBootXML): Always clean
up useserial.
Setting a hostname that cannot be resolved is not the best configuration
but since virGetHostname only calls getaddrinfo to get host's canonical
name and we do not fail if the returned canonical name is NULL or
"localhost", there is no reason why we should fail if getaddrinfo itself
fails.
Detected by Coverity. p (the pointer to the string) is always true;
when in reality, we wanted to know whether the integer value of the
just-parsed string is '0' or '1'. Logic bug since commit b1b5b51.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetBlockInfo): Set
results to proper value.
Detected by Coverity. If, for some reason, our text monitor input
does not match our assumptions, we end up incrementing p while it
is NULL, then dereferencing the pointer 0x1, which will fault.
* src/qemu/qemu_monitor_text.c
(qemuMonitorTextGetBlockStatsParamsNumber): Rewrite to avoid
deref of strchr failure. Fix indentation.
Coverity complained that most, but not all, clients of virUUIDParse
were checking for errors. Silence those coverity warnings by
explicitly marking the cases where we trust the input, and fixing
one instance that really should have been checking. In particular,
this silences a rather large percentage of the warnings I saw on my
most recent Coverity analysis run.
* src/util/uuid.h (virUUIDParse): Enforce rules.
* src/util/uuid.c (virUUIDParse): Drop impossible check; at least
Coverity will detect if we break rules and pass NULL.
* src/xenapi/xenapi_driver.c (xenapiDomainCreateXML)
(xenapiDomainLookupByID, xenapiDomainLookupByName)
(xenapiDomainDefineXML): Ignore return when we trust data source.
* src/vbox/vbox_tmpl.c (nsIDtoChar, vboxIIDToUUID_v3_x)
(vboxCallbackOnMachineStateChange)
(vboxCallbackOnMachineRegistered, vboxStoragePoolLookupByName):
Likewise.
* src/node_device/node_device_hal.c (gather_system_cap): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr): Check for errors.
In virFDStreamOpenFileInternal(), a errfd pipe is opened by
virCommandRunAsync() and given to virFDStreamOpenInternal().
It seems virFDStream should close errfd, just like the other
fd it is given.
This fixes screenshots leaking FDs:
http://bugzilla.redhat.com/show_bug.cgi?id=745761
virCommandTransferFD promises that the fd is no longer owned by
the caller. Normally, we want the fd to remain open until the
child runs, but in error situations, we must close it earlier.
* src/util/command.c (virCommandTransferFD): Close fd now if we
can't track it to close later.
(virCommandKeepFD): Adjust helper to make this easier.
As this is needed. Although some functions check for domain
being active before obtaining job, we need to check it after,
because obtaining job unlocks domain object, during which
a state of domain can be changed.
Currently, push & pop from event queue (both server & client side)
rely on lock from higher levels, e.g. on driver lock (qemu),
private_data (remote), ...; This alone is not sufficient as not
every function that interacts with this queue can/does lock,
esp. in client where we have a different approach, "passing
the buck".
Therefore we need a separate lock just to protect event queue.
For more info see:
https://bugzilla.redhat.com/show_bug.cgi?id=743817
This patch extends qemudDomainCoreDump so it supports new VIR_DUMP_RESET
flag. If this flag is set, domain is reset on successful dump. However,
this is needed to be done after we start CPUs.
With the recent refactoring of qemu snapshot relationships, it
is now trivial to filter on leaves.
* src/conf/domain_conf.c (virDomainSnapshotObjListCount)
(virDomainSnapshotObjListCopyNames): Handle new flag.
* src/qemu/qemu_driver.c (qemuDomainSnapshotListNames)
(qemuDomainSnapshotNum, qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Pass new flag through.
For some versions of Xen the difference between "tap" and "tap2" is
important. When converting back from xen-sxpr to libvirt-xml, that
information is lost, which breaks re-defining the domain using that
data.
Explicitly return "tap2" for disks defined as "device/tap2".
Signed-off-by: Philipp Hahn <hahn@univention.de>
When PyGrub is used as the bootloader in Xen, it gets passed the first
bootable disk. Xend supports a "bootable"-flag for this, which isn't
explicitly supported by libvirt.
When converting libvirt-xml to xen-sxpr the "bootable"-flag gets
implicitly set by xen.xend.XenConfig.device_add() for the first disk
(marked as "Compat hack -- mark first disk bootable").
When converting back xen-sxpr to libvirt-xml, the disks are returned in
the internal order used by Xend ignoring the "bootable"-flag, which
loses the original order. When the domain is then re-defined, the order
of disks is changed, which breaks PyGrub, since a different disk gets
passed.
When converting xen-sxpr to libvirt-xml, use the "bootable"-flag to
determine the first disk.
This isn't perfect, since several disks can be marked as bootable using
the Xend-API, but that is not supported by libvirt. In all known cases
relevant to libvirt exactly one disk is marked as bootable.
Signed-off-by: Philipp Hahn <hahn@univention.de>
VirtFS allows the user to choose between path/handle based fs driver.
As of now, libvirt hardcoded path based driver only. This patch provides
a solution to allow user to choose between path/handle based fs driver.
Sample:
<filesystem type='mount'>
<driver type='handle'/>
<source dir='/folder/to/share1'/>
<target dir='mount_tag1'/>
</filesystem>
<filesystem type='mount'>
<driver type='path'/>
<source dir='/folder/to/share2'/>
<target dir='mount_tag2'/>
</filesystem>
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Implement a generic helper to escape a given set of characters with a
leading '\'. Generalizes virBufferEscapeSexpr().
Signed-off-by: Sage Weil <sage@newdream.net>
The previous optimizations lead to some follow-on cleanups.
* src/conf/domain_conf.c (virDomainSnapshotForEachChild)
(virDomainSnapshotForEachDescendant): Drop dead parameter.
(virDomainSnapshotActOnDescendant)
(virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): Update callers.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListChildrenNames, qemuDomainSnapshotDelete):
Likewise.
* src/conf/domain_conf.h: Update prototypes.
Among other improvements, virDomainSnapshotForEachDescendant is
changed from iterative O(n^2) to recursive O(n). A bit better
than the O(n^3) implementation in virsh snapshot-list!
* src/conf/domain_conf.c (virDomainSnapshotObjListNum)
(virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjeListGetNames, virDomainSnapshotForEachChild)
(virDomainSnapshotForEachDescendant): Optimize.
(virDomainSnapshotActOnDescendant): Tweak.
(virDomainSnapshotActOnChild, virDomainSnapshotMarkDescendant):
Delete, now that they are unused.
Maintain the parent/child relationships of all qemu snapshots.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Populate
relationships after loading.
(qemuDomainSnapshotCreateXML): Set relations on creation; tweak
redefinition to reuse existing object.
(qemuDomainSnapshotReparentChildren, qemuDomainSnapshotDelete):
Clear relations on delete.
No one was using virDomainSnapshotHasChildren, but that was an
O(n) function. Exposing and tracking a bit more metadata for each
snapshot will allow the same query to be made with an O(1) query
of the member field. For single snapshot operations (create,
delete), callers can be trusted to maintain the metadata themselves,
but for reloading, we can't compute parents as we go since there
is no guarantee that parents were parsed before children, so we also
provide a function to refresh the relationships, and which can
be used to detect if the user has ignored our warnings and been
directly modifying files in /var/lib/libvirt/qemu/snapshot. This
patch only adds metadata; later patches will actually use it.
This layout intentionally hardcodes the size of each snapshot struct,
by tracking sibling pointers, rather than having to deal with the
headache of yet more memory management by directly sticking a
dynamically sized child[] on each parent.
* src/conf/domain_conf.h (_virDomainSnapshotObj)
(_virDomainSnapshotObjList): Add members.
(virDomainSnapshotUpdateRelations, virDomainSnapshotDropParent):
New prototypes.
(virDomainSnapshotHasChildren): Delete.
* src/conf/domain_conf.c (virDomainSnapshotSetRelations)
(virDomainSnapshotUpdateRelations, virDomainSnapshotDropParent):
New functions.
(virDomainSnapshotHasChildren): Drop unused function.
* src/libvirt_private.syms (domain_conf): Update exports.
To date, JSON disk snapshots worked by accident, as they were always
using hmp fallback due to a typo in commit e702b5b not picking up
on the (intentional) difference in command names between the two
monitor protocols.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot):
Spell QMP command correctly.
Reported by Luiz Capitulino.
Detected by autogen.sh on a cross-mingw build:
Creating library file: .libs/libvirt.dll.a
Cannot export virNetSASLContextCheckIdentity: symbol not defined
Cannot export virNetSASLContextNewServer: symbol not defined
...
* src/libvirt_private.syms (virnetsaslcontext.h): Move symbols...
* src/libvirt_sasl.syms: ...to new file.
* src/Makefile.am (USED_SYM_FILES) [HAVE_SASL]: Use new file.
(EXTRA_DIST): Ship it.
I got these distcheck failures with sanlock enabled:
ERROR: files left in build directory after distclean:
./tools/virt-sanlock-cleanup
./src/locking/qemu-sanlock.conf
* src/Makefile.am (DISTCLEANFILES) [HAVE_SANLOCK]: Clean built
file.
* tools/Makefile.am (DISTCLEANFILES): Likewise.
The libvirtd daemon had a few crude system tap probes. Some of
these were broken during the RPC rewrite. The new modular RPC
code is structured in a way that allows much more effective
tracing. Instead of trying to hook up the original probes,
define a new set of probes for the RPC and event code.
The master probes file is now src/probes.d. This contains
probes for virNetServerClientPtr, virNetClientPtr, virSocketPtr
virNetTLSContextPtr and virNetTLSSessionPtr modules. Also add
probes for the poll event loop.
The src/dtrace2systemtap.pl script can convert the probes.d
file into a libvirt_probes.stp file to make use from systemtap
much simpler.
The src/rpc/gensystemtap.pl script can generate a set of
systemtap functions for translating RPC enum values into
printable strings. This works for all RPC header enums (program,
type, status, procedure) and also the authentication enum
The PROBE macro will automatically generate a VIR_DEBUG
statement, so any place with a PROBE can remove any existing
manual DEBUG statements.
* daemon/libvirtd.stp, daemon/probes.d: Remove obsolete probing
* daemon/libvirtd.h: Remove probe macros
* daemon/Makefile.am: Remove all probe buildings/install
* daemon/remote.c: Update authentication probes
* src/dtrace2systemtap.pl, src/rpc/gensystemtap.pl: Scripts
to generate STP files
* src/internal.h: Add probe macros
* src/probes.d: Master list of probes
* src/rpc/virnetclient.c, src/rpc/virnetserverclient.c,
src/rpc/virnetsocket.c, src/rpc/virnettlscontext.c,
src/util/event_poll.c: Insert probe points, removing any
DEBUG statements that duplicate the info
Pull the call to gnutls_x509_crt_get_dn up into a higher function
so that the 'dname' variable will be available for probe points
* src/rpc/virnettlscontext.c: Pull gnutls_x509_crt_get_dn up
one level
If we receive an error on the stream, set the EOF marker so
that any further (bogus) incoming data is dropped.
* src/rpc/virnetclientstream.c: Set EOF on stream
To avoid static linking libvirtd to the RPC server code, which
then prevents sane introduction of DTrace probes, put it all
in the libvirt.so, and export it
* daemon/Makefile.am: Don't link to RPC libraries
* src/Makefile.am: Link all RPC libraries to libvirt.so
* src/libvirt_private.syms: Export all RPC functions
It was fairly trivial to return snapshot listing based on a
point in the hierarchy, rather than starting at all roots.
* src/esx/esx_driver.c (esxDomainSnapshotNumChildren)
(esxDomainSnapshotListChildrenNames): New functions.
Not too hard to wire up. The trickiest part is realizing that
listing children of a snapshot cannot use SNAPSHOT_LIST_ROOTS,
and that we overloaded that bit to also mean SNAPSHOT_LIST_DESCENDANTS;
we use that bit to decide which iteration to use, but don't want
the existing counting/listing functions to see that bit.
* src/conf/domain_conf.h (virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): New prototypes.
* src/conf/domain_conf.c (virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): New functions.
* src/libvirt_private.syms (domain_conf.h): Export them.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListChildrenNames): New functions.
Very mechanical. I'm so glad we've automated the generation of things,
compared to what it was in 0.8.x days, where this would be much longer.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_NUM_CHILDREN)
(REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_CHILDREN_NAMES): New rpcs.
(remote_domain_snapshot_num_children_args)
(remote_domain_snapshot_num_children_ret)
(remote_domain_snapshot_list_children_names_args)
(remote_domain_snapshot_list_children_names_ret): New structs.
* src/remote/remote_driver.c (remote_driver): Use it.
* src/remote_protocol-structs: Update.
The previous API addition allowed traversal up the hierarchy;
this one makes it easier to traverse down the hierarchy.
In the python bindings, virDomainSnapshotNumChildren can be
generated, but virDomainSnapshotListChildrenNames had to copy
from the hand-written example of virDomainSnapshotListNames.
* include/libvirt/libvirt.h.in (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New prototypes.
(VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS): New flag alias.
* src/libvirt.c (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New functions.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSnapshotNumChildren)
(virDrvDomainSnapshotListChildrenNames): New callbacks.
* python/generator.py (skip_impl, nameFixup): Update lists.
* python/libvirt-override-api.xml: Likewise.
* python/libvirt-override.c
(libvirt_virDomainSnapshotListChildrenNames): New wrapper function.
On xen 4.1 I observed configurations that look like:
(image
(hvm
(kernel '')
(loader '/foo/bar')
))
The kernel element is there but unset. This leads to an empty <kernel/>
element in the XML and even worse makes us skip the boot order parsing
and therefore not emit a <boot device='$dev>'/> element which breaks CD
booting.
otherwise a missing UUID in a domain config just shows:
error: An error occurred, but the cause is unknown
Now we have:
error: configuration file syntax error: config value uuid was missing
* src/storage/storage_backend_logical.c:
If a logical vol is created as striped. (e.g. --stripes 3),
the "device" field of lvs output will have multiple fileds which are
seperated by comma. Thus the RE we write in the codes will not
work well anymore. E.g. (lvs output for a stripped vol, uses "#" as
seperator here):
test_stripes##fSLSZH-zAS2-yAIb-n4mV-Al9u-HA3V-oo9K1B#\
/dev/sdc1(10240),/dev/sdd1(0)#42949672960#4194304
The RE we use:
const char *regexes[] = {
"^\\s*(\\S+),(\\S*),(\\S+),(\\S+)\\((\\S+)\\),(\\S+),([0-9]+),?\\s*$"
};
Also the RE doesn't match the "devices" field of striped vol properly,
it contains multiple "device path" and "offset".
This patch mainly does:
1) Change the seperator into "#"
2) Change the RE for "devices" field from "(\\S+)\\((\\S+)\\)"
into "(\\S+)".
3) Add two new options for lvs command, (segtype, stripes)
4) Extend the RE to match the value for the two new fields.
5) Parse the "devices" field seperately in virStorageBackendLogicalMakeVol,
multiple "extents" info are generated if the vol is striped. The
number of "extents" is equal to the stripes number of the striped vol.
A incidental fix: (virStorageBackendLogicalMakeVol)
Free "vol" if it's new created and there is error.
Demo on striped vol with the patch applied:
% virsh vol-dumpxml /dev/test_vg/vol_striped2
<volume>
<name>vol_striped2</name>
<key>QuWqmn-kIkZ-IATt-67rc-OWEP-1PHX-Cl2ICs</key>
<source>
<device path='/dev/sda5'>
<extent start='79691776' end='88080384'/>
</device>
<device path='/dev/sda6'>
<extent start='62914560' end='71303168'/>
</device>
</source>
<capacity>8388608</capacity>
<allocation>8388608</allocation>
<target>
<path>/dev/test_vg/vol_striped2</path>
<permissions>
<mode>0660</mode>
<owner>0</owner>
<group>6</group>
<label>system_u:object_r:fixed_disk_device_t:s0</label>
</permissions>
</target>
</volume>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=727474
If parsing qemu command line fails (e.g. because of non-existing
process number supplied), we jump to cleanup label where we free
pidfile. Therefore it needs to be initialized. Otherwise we free
random pointer.
Coverity complained that 4 out of 5 callers to virJSONValueObjectGetBoolean
checked for errors. But we documented that we don't care in this case.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBlockInfo): Use
ignore_value.
Detected by Coverity. We want to increment the size_t counter,
not the pointer to the counter. Bug present since 5f5c6fde (0.9.5).
* src/lxc/lxc_controller.c (lxcSetupLoopDevices): Use correct
precedence.
If we send back an unknown program error for async messages,
we will confuse the client because they only expect replies
for method calls. Just log & drop any invalid async messages
* src/rpc/virnetserver.c: Don't send error for async messages
Commit 597fe3cee6 accidentally
introduced a deadlock when reporting an unknown RPC program.
The virNetServerDispatchNewMessage method is called with
the client locked, and must therefore not attempt to send
any RPC messages back to the client. Only once the incoming
message is passed off to the virNetServerHandleJob worker
is it safe to start sending messages back
* src/rpc/virnetserver.c: Delay checking for unknown RPC
program until in worker thread
Redefining disk-only snapshot xml should work even if the user
did not explicitly pass VIR_DOMAIN_SNAPSHOT_CREATE_DISK_ONLY;
the flag is only required for conditions where the <state>
subelement is not already present in parsing (that is, defining
a new snapshot).
Also, fix the error code of some user-visible errors (the remaining
VIR_ERR_INTERNAL_ERROR should not be user-visible, since parsing
of <active> is only done from internal code).
* src/conf/domain_conf.c (virDomainSnapshotDefParseString): Allow
disks during redefinition of disk snapshot.
I am getting this failure with 'make distcheck':
GEN ../../src/remote_protocol-structs
/bin/sh: ../../src/remote_protocol-structs-t: Permission denied
make[4]: *** [../../src/remote_protocol-structs] Error 1
since it attempts a sub-run of a VPATH 'make check' where $(srcdir)
is intentionally read-only. I'm not sure which commit introduced
the problem, although I suspect it was around 62dee6f when I
refactored protocol struct checking to be more powerful.
$(@F) is required by POSIX, and although it is not yet portable
to all make implementations, we already require GNU make.
* src/Makefile.am (PDWTAGS): Generate temp file into current
directory, since $(srcdir) is read-only during distcheck.
Previously libvirt's disk device XML only had a single attribute,
error_policy, to control both read and write error policy, but qemu
has separate options for controlling read and write. In one case
(enospc) a policy is allowed for write errors but not read errors.
This patch adds a separate attribute that sets only the read error
policy. If just error_policy is set, it will apply to both read and
write error policy (previous behavior), but if the new rerror_policy
attribute is set, it will override error_policy for read errors only.
Possible values for rerror_policy are "stop", "report", and "ignore"
("report" is the qemu-controlled default for rerror_policy when
error_policy isn't specified).
For consistency, the value "report" has been added to the possible
values for error_policy as well.
commit 12062ab set rerror=ignore when error_policy="enospace" was
selected (since the rerror option in qemu doesn't accept "enospc", as
the werror option does).
After that patch was already pushed, Paolo Bonzini noticed it and
commented that leaving rerror at the default ("report") would be a
better choice. This patch corrects the problem - if error_policy =
"enospace" is given, rerror is left off the qemu commandline,
effectively setting it to "report". For other values, rerror is still
set to match werror.
Additionally, the parsing of error_policy was changed to no longer
erroneously allow "default" as a choice - as with most other
attributes, if you want the default setting, just don't specify an
error_policy.
Finally, two ommissions in the first patch were corrected - a
long-dormant qemuxml2argv test for enospace was enabled, and fixed to
pass, and the argv2xml parser in qemu_command.c was updated to
recognize the different spelling on the qemu commandline.
Now that RHEL 6.2 Beta is out, it would be nice to test multifunction
devices on that platform. This changes things so that the multifunction
cap bit can be set in two different ways: by version comparison (needed
for qemu 0.13 which lacked a -device query), and by -device query
(provided by qemu.git and backported to the RHEL beta build of
qemu-kvm which still claims to be a modified 0.12, and therefore needed
for RHEL).
* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Allow
second method of setting multifunction cap bit.
* tests/qemuhelptest.c (mymain): Test it.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device: Likewise.
If using one of the new non-NAT/routed virtual network
configurations, the LXC driver would not know how to
setup the VETH devices. Adding in calls to setup the
"actual" network configuration at VM startup and cleanup
when shutting down fixes this.
* src/lxc/lxc_driver.c: Setup/cleanup actual net devs
Implements the documentation for snapshot revert vs. force.
Part of the patch tightens existing behavior (previously, reverting
to an old snapshot without <domain> was blindly attempted, now it
requires force), while part of it relaxes behavior (previously, it
was not possible to revert an active domain to an ABI-incompatible
active snapshot, now force allows this transition).
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Check for
risky situations, and allow force to get past them.
Once we know which set of disks belong to a snapshot, reverting or
deleting that snapshot should visit just those disks, rather than
also visiting disks that were hot-plugged in the meantime or
skipping disks that were hot-unplugged in the meantime.
* src/qemu/qemu_domain.c (qemuDomainSnapshotForEachQcow2): Use
snapshot domain details when available. Avoid NULL deref.
Although reverting to a snapshot is a form of data loss, this is
normally expected. However, there are two cases where additional
surprises (failure to run the reverted state, or a break in
connectivity to the domain) can come into play. Requiring extra
acknowledgment in these cases will make it less likely that
someone can get into an unrecoverable state due to a default revert.
Also create a new error code, so users can distinguish when forcing
would make a difference, rather than having to blindly request force.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_REVERT_FORCE):
New flag.
* src/libvirt.c (virDomainRevertToSnapshot): Document it.
* include/libvirt/virterror.h (VIR_ERR_SNAPSHOT_REVERT_RISKY): New
error value.
* src/util/virterror.c (virErrorMsg): Implement it.
* tools/virsh.c (cmdDomainSnapshotRevert): Add --force to virsh.
* tools/virsh.pod (snapshot-revert): Document it.
Commit 9f5e53e introduced the ability to filter snapshots to
just roots, but it was never implemented for VBox until now.
The VBox implementation prohibits deletion of a snapshot with
multiple children. Hence, there can only be at most one root,
which is found by searching for the snapshot with a NULL uuid.
Prior to 4.0, snapshotGet looked up by UUID, and snapshotFind
looked up by name; after that point, snapshotGet disappeared
and snapshotFind handles uuid or name.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotNum)
(vboxDomainSnapshotListNames): Implement limiting list to root.
Qemu driver tries to update balloon data in virDomainGetInfo and if it
can't do so because there is another monitor job running, it just
reports what's known in domain def. However, if there was no job running
but getting the data from qemu fails, we would fail the whole API. This
doesn't make sense. Let's make the failure nonfatal.
No need to request the parent of a snapshot if we aren't going to use it.
* src/esx/esx_vi.c (esxVI_GetSnapshotTreeByName): Make parent
optional.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML)
(esxDomainSnapshotLookupByName, esxDomainRevertToSnapshot)
(esxDomainSnapshotDelete): Simplify accordingly.
Commit 9f5e53e introduced the ability to filter snapshots to
just roots, but it was never implemented for ESX until now.
* src/esx/esx_vi.h (esxVI_GetNumberOfSnapshotTrees)
(esxVI_GetSnapshotTreeNames): Add parameter.
* src/esx/esx_vi.c (esxVI_GetNumberOfSnapshotTrees)
(esxVI_GetSnapshotTreeNames): Allow choice of recursion or not.
* src/esx/esx_driver.c (esxDomainSnapshotNum)
(esxDomainSnapshotListNames): Use it to limit to roots.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=730909
When support for setting the qemu disk error policy to "enospc" was
added, it was inadvertently spelled "enospace". This patch corrects
that on the qemu commandline (while retaining the "enospace" spelling
for libvirt's XML).
Also, while examining the qemu source, I found that "enospc" is not
allowed for the read error policy, only for write error policy (makes
sense). Since libvirt currently only has a single error policy
setting, when "enospace" is selected, the read error policy is set to
"ignore".
Destination libvirtd remembers the original name in the prepare phase
and clears it in the finish phase. The original name is used when
comparing domain name in migration cookie.
When booting a virtual machine with a kernel/initrd it is possible
to pass command line arguments using the <cmdline>...args...</cmdline>
element in the guest XML. These appear to the kernel / init process
in /proc/cmdline.
When booting a container we do not have a custom /proc/cmdline,
but we can easily set an environment variable for it. Ideally
we could pass individual arguments to the init process as a
regular set of 'char *argv[]' parameters, but that would involve
libvirt parsing the <cmdline> XML text. This can easily be added
later, even if we add the env variable now
* docs/drvlxc.html.in: Document env variables passed to LXC
* src/conf/domain_conf.c: Add <cmdline> to be parsed for
guests of type='exe'
* src/lxc/lxc_container.c: Set LIBVIRT_LXC_CMDLINE env var
This patch is a fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=743176
which was discovered by Dan Berrange while making bandwidth
configuration work for LXC guests.
Background: Although virtportprofile data from a network portgroup is
only applicable for direct mode interfaces, the code that copies
bandwidth data from the portgroup was also only being executed in the
case of direct mode interfaces. The result was that interfaces using
traditional virtual networks (forward mode='nat|route|none'), and
those using a host bridge for forwarding, would not pick up bandwidth
data from a portgroup defined in the network.
This patch moves that code outside the conditional, so that bandwidth
information is *alway* copied from the appropriate portgroup (unless
the <interface> definition itself already has bandwidth information,
which would take precedence over what's in the portgroup anyway).
Code altered so that it is consistent with the associated comment. The
'autoconf' variable is forced to zero.
Signed-off-by: Neil Wilson <neil@brightbox.co.uk>
Do not crash if virStreamFinish is called after error.
==11000== Invalid read of size 4
==11000== at 0x373A8099A0: pthread_mutex_lock (pthread_mutex_lock.c:51)
==11000== by 0x4C7CADE: virMutexLock (threads-pthread.c:85)
==11000== by 0x4D57C31: virNetClientStreamRaiseError (virnetclientstream.c:203)
==11000== by 0x4D385E4: remoteStreamFinish (remote_driver.c:3541)
==11000== by 0x4D182F9: virStreamFinish (libvirt.c:14157)
==11000== by 0x40FDC4: cmdScreenshot (virsh.c:3075)
==11000== by 0x42BA40: vshCommandRun (virsh.c:14922)
==11000== by 0x42ECCA: main (virsh.c:16381)
==11000== Address 0x59b86c0 is 16 bytes inside a block of size 216 free'd
==11000== at 0x4A06928: free (vg_replace_malloc.c:427)
==11000== by 0x4C69E2B: virFree (memory.c:310)
==11000== by 0x4D57B56: virNetClientStreamFree (virnetclientstream.c:184)
==11000== by 0x4D3DB7A: remoteDomainScreenshot (remote_client_bodies.h:1812)
==11000== by 0x4CFD245: virDomainScreenshot (libvirt.c:2903)
==11000== by 0x40FB73: cmdScreenshot (virsh.c:3029)
==11000== by 0x42BA40: vshCommandRun (virsh.c:14922)
==11000== by 0x42ECCA: main (virsh.c:16381)
When support for was added for PCI multifunction cards (in commit
9f8baf, first included in libvirt 0.9.3), it was done by always
turning on the multifunction bit for all PCI devices. Since that time
it has been realized that this is not an ideal solution, and that the
multifunction bit must be selectively turned on. For example, see
https://bugzilla.redhat.com/show_bug.cgi?id=728174
and the discussion before and after
https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html
This patch modifies multifunction support so that the multifunction=on
option is only added to the qemu commandline for a device if its PCI
<address> definition has the attribute "multifunction='on'", e.g.:
<address type='pci' domain='0x0000' bus='0x00'
slot='0x04' function='0x0' multifunction='on'/>
In practice, the multifunction bit should only be turned on if
function='0' AND other functions will be used in the same slot - it
usually isn't needed for functions 1-7 (although there are apparently
some exceptions, e.g. the Intel X53 according to the QEMU source
code), and should never be set if only function 0 will be used in the
slot. The test cases have been changed accordingly to illustrate.
With this patch in place, if a user attempts to assign multiple
functions in a slot without setting the multifunction bit for function
0, libvirt will issue an error when the domain is defined, and the
define operation will fail. In the future, we may decide to detect
this situation and automatically add multifunction=on to avoid the
error; even then it will still be useful to have a manual method of
turning on multifunction since, as stated above, there are some
devices that excpect it to be turned on for all functions in a slot.
A side effect of this patch is that attempts to use the same PCI
address for two different devices will now log an error (previously
this would cause the domain define operation to fail, but there would
be no log message generated). Because the function doing this log was
almost completely rewritten, I didn't think it worthwhile to make a
separate patch for that fix (the entire patch would immediately be
obsoleted).
If the regexes supported (?:pvs)?, then we could handle this by
optionally matching but not returning the initial command name. But it
doesn't. So add a new char* argument to
virStorageBackendRunProgRegex(). If that argument is NULL then we act
as usual. Otherwise, if the string at that argument is found at the
start of a returned line, we drop that before running the regex.
With this patch, virt-manager shows me lvs with command_names 1 or 0.
The definitions of PVS_BASE etc may want to be moved into the configure
scripts (though given how PVS is found, IIUC that could only happen if
pvs was a link to pvs_real), but in any case no sense dealing with that
until we're sure this is an ok way to handle it.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, qemuDomainGetXMLDesc and qemudDomainGetInfo check for
outstanding synchronous job before (eventual) monitor entering.
However, there can be already async job set, e.g. migration.
Before, URIs such as hyperv+ssh:// have been declined by the Hyper-V
driver resulting in the remote driver trying to connect to an
non-existing libvirtd.
Now such URIs trigger an error in the yper-V driver suggesting to
try again without the transport part in the scheme.
Before, URIs such as esx+ssh:// have been declined by the ESX driver
resulting in the remote driver trying to connect to an non-existing
libvirtd.
Now such URIs trigger an error in the ESX driver suggesting to try
again without the transport part in the scheme.
If the daemon is restarted so we reconnect to monitor, cdrom media
can be ejected. In that case we don't want to show it in domain xml,
or require it on migration destination.
To check for disk status use 'info block' monitor command.
* src/qemu/qemu_migration.c: if 'vmdef' is NULL, the function
virDomainSaveConfig still dereferences it, it doesn't make
sense, so should add return value check to make sure 'vmdef'
is non-NULL before calling virDomainSaveConfig, in addition,
in order to debug later, also should record error information
into log.
Signed-off-by: Alex Jia <ajia@redhat.com>
First hypervisor implementation of the new API.
Allows 'virsh snapshot-list --tree' to be more efficient.
* src/qemu/qemu_driver.c (qemuDomainSnapshotGetParent): New
function.
Mostly straight-forward, although this is the first API that
returns a new snapshot based on a snapshot rather than a domain.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_GET_PARENT): New rpc.
(remote_domain_snapshot_get_parent_args)
(remote_domain_snapshot_get_parent_ret): New structs.
* src/rpc/gendispatch.pl: Adjust generator.
* src/remote/remote_driver.c (remote_driver): Use it.
* src/remote_protocol-structs: Update.
Although a client can already obtain a snapshot's parent by
dumping and parsing the xml, then doing a snapshot lookup by
name, it is more efficient to get the parent in one step, which
in turn will make operations that must traverse a snapshot
hierarchy easier to perform.
* include/libvirt/libvirt.h.in (virDomainSnapshotGetParent):
Declare.
* src/libvirt.c (virDomainSnapshotGetParent): New function.
* src/libvirt_public.syms: Export it.
* src/driver.h (virDrvDomainSnapshotGetParent): New callback.
This patch fixes the regression with using named pipes for qemu serial
devices noted in:
https://bugzilla.redhat.com/show_bug.cgi?id=740478
The problem was that, while new code in libvirt looks for a single
bidirectional fifo of the name given in the config, then relabels that
and continues without looking for / relabelling the two unidirectional
fifos named ${name}.in and ${name}.out, qemu looks in the opposite
order. So if the user had naively created all three fifos, libvirt
would relabel the bidirectional fifo to allow qemu access, but qemu
would attempt to use the two unidirectional fifos and fail (because it
didn't have proper permissions/rights).
This patch changes the order that libvirt looks for the fifos to match
what qemu does - first it looks for the dual fifos, then it looks for
the single bidirectional fifo. If it finds the dual unidirectional
fifos first, it labels/chowns them and ignores any possible
bidirectional fifo.
(Note commit d37c6a3a (which first appeared in libvirt-0.9.2) added
the code that checked for a bidirectional fifo. Prior to that commit,
bidirectional fifos for serial devices didn't work because libvirt
always required the ${name}.(in|out) fifos to exist, and qemu would
always prefer those.
If a domain started with -no-shutdown shuts down while libvirtd is not
running, it will be seen as paused when libvirtd reconnects to it. Use
the paused reason to detect if a domain was stopped because of shutdown
and finish the process just as if a SHUTDOWN event is delivered from
qemu.
The AppArmor security driver adds only the path specified in the domain
XML for character devices of type 'pipe'. It should be using <path>.in
and <path>.out. We do this by creating a new vah_add_file_chardev() and
use it for char devices instead of vah_add_file(). Also adjust
valid_path() to accept S_FIFO (since qemu chardevs of type 'pipe' use
fifos). This is https://launchpad.net/bugs/832507
This patch was made in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=738095
In short, qemu's default for the rombar setting (which makes the
firmware ROM of a PCI device visible/not on the guest) was previously
0 (not visible), but they recently changed the default to 1
(visible). Unfortunately, there are some PCI devices that fail in the
guest when rombar is 1, so the setting must be exposed in libvirt to
prevent a regression in behavior (it will still require explicitly
setting <rom bar='off'/> in the guest XML).
rombar is forced on/off by adding:
<rom bar='on|off'/>
inside a <hostdev> element that defines a PCI device. It is currently
ignored for all other types of devices.
At the moment there is no clean method to determine whether or not the
rombar option is supported by QEMU - this patch uses the advice of a
QEMU developer to assume support for qemu-0.12+. There is currently a
patch in the works to put this information in the output of "qemu-kvm
-device pci-assign,?", but of course if we switch to keying off that,
we would lose support for setting rombar on all the versions of qemu
between 0.12 and whatever version gets that patch.
SIGTERM handling for -no-shutdown is already fixed in qemu git and
libvirt can safely use it. The downside is that 0.15.50 version of qemu
can be any qemu compiled from git, even that without the fix for
SIGTERM. However, I think this patch is worth it since excluding 0.15.50
from the check makes testing current qemu with libvirt much easier and
someone running qemu from git should be able to rebuild fixed qemu from
git if they hit the problem with a hang on shutdown.
* src/storage/storage_driver.c: As virStorageVolLookupByPath lookups
all the pool objs of the drivers, breaking when failing on getting
the stable path of the pool will just breaks the whole lookup process,
it can cause the API fails even if the vol exists indeed. It won't get
any benefit. This patch is to fix it.
QEMU 0.13 introduced cache=unsafe for -drive, this patch exposes
it in the libvirt layer.
* Introduced a new QEMU capability flag ($prefix_CACHE_UNSAFE),
as even if $prefix_CACHE_V2 is set, we can't know if unsafe
is supported.
* Improved the reliability of qemu cache type detection.
commit 984840a2c2 removed the
notification of waiting calls when VIR_NET_CONTINUE messages
arrive. This was to fix the case of a virStreamAbort() call
being prematurely notified of completion.
The problem is that sometimes there are dummy calls from a
virStreamRecv() call waiting that *do* need to be notified.
These dummy calls should have a status VIR_NET_CONTINUE. So
re-add the notification upon VIR_NET_CONTINUE, but only if
the waiter also has a status of VIR_NET_CONTINUE.
* src/rpc/virnetclient.c: Notify waiting call if stream data
arrives
* src/rpc/virnetclientstream.c: Mark dummy stream read packet
with status VIR_NET_CONTINUE
If a domain has inactive XML we want to transfer it to destination
when migrating with VIR_MIGRATE_PERSIST_DEST. In order to harm
the migration protocol as least as possible, a optional cookie was
chosen.
The previous patch removed all snapshots, but not the directory
where the snapshots lived, which is still a form of stale data.
* src/qemu/qemu_domain.c (qemuDomainRemoveInactive): Wipe any
snapshot directory.
Commit 282fe1f0 documented that transient domains will auto-delete
any snapshot metadata when the last reference to the domain is
removed, and that management apps are in charge of grabbing any
snapshot metadata prior to that point. However, this was not
actually implemented for qemu until now.
* src/qemu/qemu_driver.c (qemudDomainCreate)
(qemuDomainDestroyFlags, qemuDomainSaveInternal)
(qemudDomainCoreDump, qemuDomainRestoreFlags, qemudDomainDefine)
(qemuDomainUndefineFlags, qemuDomainMigrateConfirm3)
(qemuDomainRevertToSnapshot): Clean up snapshot metadata.
* src/qemu/qemu_migration.c (qemuMigrationPrepareAny)
(qemuMigrationPerformJob, qemuMigrationPerformPhase)
(qemuMigrationFinish): Likewise.
* src/qemu/qemu_process.c (qemuProcessHandleMonitorEOF)
(qemuProcessReconnect, qemuProcessReconnectHelper)
(qemuProcessAutoDestroyDom): Likewise.
This patch is mostly code motion - moving some functions out
of qemu_driver and into qemu_domain so they can be reused by
multiple qemu_* files (since qemu_driver.h must not grow).
It also adds a new helper function, qemuDomainRemoveInactive,
which will be used in the next patch.
* src/qemu/qemu_domain.h (qemuFindQemuImgBinary)
(qemuDomainSnapshotWriteMetadata, qemuDomainSnapshotForEachQcow2)
(qemuDomainSnapshotDiscard, qemuDomainSnapshotDiscardAll)
(qemuDomainRemoveInactive): New prototypes.
(struct qemu_snap_remove): New struct.
* src/qemu/qemu_domain.c (qemuDomainRemoveInactive)
(qemuDomainSnapshotDiscardAllMetadata): New functions.
(qemuFindQemuImgBinary, qemuDomainSnapshotWriteMetadata)
(qemuDomainSnapshotForEachQcow2, qemuDomainSnapshotDiscard)
(qemuDomainSnapshotDiscardAll): Move here...
* src/qemu/qemu_driver.c (qemuFindQemuImgBinary)
(qemuDomainSnapshotWriteMetadata, qemuDomainSnapshotForEachQcow2)
(qemuDomainSnapshotDiscard, qemuDomainSnapshotDiscardAll): ...from
here.
(qemuDomainUndefineFlags): Update caller.
* src/conf/domain_conf.c (virDomainRemoveInactive): Doc fixes.
Commit 19f8c98 introduced VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA,
with the intent that omitting the flag makes undefine fail, and
including the flag deletes metadata. But it used the wrong logic.
Also, hoist the transient domain sooner, so that we don't
accidentally remove metadata of a transient domain.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Check correct
flag value.
Detected by Coverity. The only way to get to error_unlink is if
path was successfully assigned, so the if was useless. Meanwhile,
there was a return statement that did not free path.
* src/locking/lock_driver_sanlock.c
(virLockManagerSanlockSetupLockspace): Fix mem-leak, and drop
useless if.
Related #BZ: https://bugzilla.redhat.com/show_bug.cgi?id=702260.
There are two problems described in the BZ:
1) "Can't remove open logical volume".
2) "Unable to deactivate logical volume "foo""
This patch just intends to fix 2), as 1) is expected if the vol
is still used by something, and you never known if "lvchange -an"
will fail or not either (sometime, it will succeed, sometimes not).
We'd better not look for trouble, :-)
For 2), that's caused by race between lvremove and udev event handling,
the only workable way now is to wait the events handling are finished,
though it might introduce latencies, as "udevadmin settle" exits
after *all* events are handled, it's the only way we can fix
the racing in libvirt layer.
See https://bugzilla.redhat.com/show_bug.cgi?id=570359 for more
details.
* src/qemu/qemu_process.c: Taking if (qemuDomainObjEndJob(driver, obj) == 0)
true branch then 'obj' is NULL, virDomainObjIsActive(obj) and
virDomainObjUnref(obj) will dereference NULL pointer.
Signed-off-by: Alex Jia <ajia@redhat.com>
Once virDomainReboot is called for a domain, guest OS initiated shutdown
would always result in reboot instead of shutdown. Only
virDomainShutdown would actually shutd such domain down. That's because
we forgot to reset fakeReboot flag once we asked the domain to reboot.
The commit that prevents disk corruption on domain shutdown
(96fc478417) causes regression with QEMU
0.14.* and 0.15.* because of a regression bug in QEMU that was fixed
only recently in QEMU git. The affected versions of QEMU do not quit on
SIGTERM if started with -no-shutdown, which we use to implement fake
reboot. Since -no-shutdown tells QEMU not to quit automatically on guest
shutdown, domains started using the affected QEMU cannot be shutdown
properly and stay in a paused state.
This patch disables fake reboot feature on such QEMU by not using
-no-shutdown, which makes shutdown work as expected. However,
virDomainReboot will not work in this case and it will report "Requested
operation is not valid: Reboot is not supported with this QEMU binary".
The next patch will add a syntax check that flags this usage in xen
as awkward - while it was valid memory management, it was very hard
to maintain. Swapping to a more traditional allocation may be a bit
slower, but easier to understand.
* src/xen/xend_internal.c (xenDaemonListDomainsOld): Use two-level
allocation, rather than abusing allocation function.
(xenDaemonLookupByUUID): Update caller.
gcc warns when building libvirt 0.9.5 on a 32-bit machine:
qemu/qemu_migration.c: In function 'qemuMigrationToFile':
qemu/qemu_migration.c:2727:38: error: large integer implicitly truncated to unsigned type [-Woverflow]
* src/qemu/qemu_domain.h (QEMU_DOMAIN_FILE_MIG_BANDWIDTH_MAX): Cap
to long when building for 32-bit platform.
Inexplicably the sanlock code all got placed under the GPLv2-only,
so libvirt's use of sanlock introduces a license incompatibility.
The sanlock developers have now rearranged the code such that there
is a 'sanlock_client.so' which is LGPLv2+ while their daemon remains
GPLv2-only. To use the new client library we need to call the new
sanlock_init and sanlock_align APIs instead of sanlock_direct_init
and sanlock_direct_align. These APIs calls are now routed via the
sanlock daemon, instead of doing direct I/O calls to disk.
For all this we require sanlock >= 1.8
* configure.ac: Check for sanlock_client.so instead of sanlock.so
and fix various comments
* libvirt.spec.in: Mandate sanlock >= 1.8
* src/Makefile.am: Link to -lsanlock_client
* src/locking/lock_driver_sanlock.c: Use sanlock_init and
sanlock_align
Libvirt loads the domain conf from status XML if it's running when
starting up. The problem is there is no record of the original conf.
(dom->newDef is NULL here).
So libvirt won't be able to restore the domain conf to original one
when destroying/shutdown. E.g.
1) attach a device without "--persistent"
2) restart libvirtd
3) destroy domain
4) start domain
One will see the the disk still exists.
This patch is to fix the peoblem by assigning persistent domain conf
to dom->newDef if it's NULL and the domain is running.
Virsh man page lists driver types to be used with attach-device
command, but does not specify that those are usable only with the XEN
Hypervisor.
This patch adds statement, that those options specified are applicable
only on the Xen hypervisor and adds option usable with qemu emulator.
This patch also changes type of error returned by QEMU driver if the
user specifies incompatible driver type from VIR_ERR_INTERNAL_ERROR to
VIR_ERR_CONFIG_UNSUPPORTED.
* src/vmx/vmx.c: fix memory leak, 'def' has a initial value 'NULL', so
'goto cleanup' is perfected instead of adding a virConfFree before
'return NULL'.
Signed-off-by: Alex Jia <ajia@redhat.com>
Leak present since introduction of remoteDomainBuildEventGraphics
in commit 987e31e.
* src/remote/remote_driver.c: fix memory leak.
Signed-off-by: Alex Jia <ajia@redhat.com>
For all types of disks other than qcow2, we were requesting that
SELinux labeling visit the new file as if it were qcow2, which
means labeling would try to find the backing files of an empty file.
And for a pre-existing qcow2 disk, we were passing NULL, which meant
that labelling tried to probe the file type (and if probing is
disabled, per the default qemu.conf, this made snapshots fail).
What we really want is to make SELinux labeling visit the new
file as raw; it will later be converted to qcow2 if qemu successfully
made the snapshot.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Force SELinux labeling
to avoid probe of new file.
For external snapshots to be useful on persistent domains, we must
alter the persistent definition alongside the running definition.
Thanks to the possibility of disk hotplug as well as of edits that
only affect the persistent xml, we can't assume that vm->def and
vm->newDef have the same disk at the same index, so we can only
update the persistent copy if the device destination matches up.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive)
(qemuDomainSnapshotCreateSingleDiskActive): Also affect newDef, if
present.
When libvirt calls virInitialize it creates a thread local
for the virErrorPtr storage, and registers a callback to
cleanup memory when a thread exits. When libvirt is dlclose()d
or otherwise made non-resident, the callback function is
removed from memory, but the thread local may still exist
and if a thread later exists, it will invoke the callback
and SEGV. There may also be other thread locals with callbacks
pointing to libvirt code, so it is in general never safe to
unload libvirt.so from memory once initialized.
To allow dlclose() to succeed, but keep libvirt.so resident
in memory, link with '-z nodelete'. This issue was first
found with the libvirt CIM provider, but can potentially
hit many of the dynamic language bindings which all ultimately
involve dlopen() in some way, either on libvirt.so itself,
or on the glue code for the binding which in turns links
to libvirt
* configure.ac, src/Makefile.am: Ensure libvirt.so is linked
with -z nodelete
* cfg.mk, .gitignore, tests/Makefile.am, tests/shunloadhelper.c,
tests/shunloadtest.c: A test case to unload libvirt while
a thread is still running.
Qemu sends STOP event as part of the shutdown process. Detect such STOP
event and consider shutdown to be reason of emitting such event. That's
the best we can do until qemu provides us the reason directly in STOP
event. This allows us to report shutdown reason for paused state so that
apps can detect domains that failed to finish the shutdown process
(e.g., because qemu is buggy and doesn't exit on SIGTERM or it is
blocked in flushing disk buffers).
Ever since we introduced fake reboot, we call qemuProcessKill as a
reaction to SHUTDOWN event. Unfortunately, qemu doesn't guarantee it
flushed all internal buffers before sending SHUTDOWN, in which case
killing the process forcibly may result in (virtual) disk corruption.
By sending just SIGTERM without SIGKILL we give qemu time to to flush
all buffers and exit. Once qemu exits, we will see an EOF on monitor
connection and tear down the domain. In case qemu ignores SIGTERM or
just hangs there, the process stays running but that's not any different
from a possible hang anytime during the shutdown process so I think it's
just fine.
Also qemu (since 0.14 until it's fixed) has a bug in SIGTERM processing
which causes it not to exit but instead send new SHUTDOWN event and keep
waiting. I think the best we can do is to ignore duplicate SHUTDOWN
events to avoid a SHUTDOWN-SIGTERM loop and leave the domain in paused
state.
When a domain is rebooted using libvirt API, we use fake reboot
consisting of shutting down and resetting the domain. Thus we see a
SHUTDOWN event and set gotShutdown flag. But we never reset it back and
if the domain crashes after it was rebooted this way, we consider it was
a normal shutdown and not a crash.
Commit 4454a9efc7 changed shutoff reason
from VIR_DOMAIN_SHUTOFF_CRASHED to VIR_DOMAIN_SHUTOFF_FAILED in case we
see an unexpected EOF on monitor connection. But FAILED reason is
dedicated for domains that fail to start. CRASHED reason is the right
one to use in this situation.
Libvirt special-cases a specific VIR_ERR_RPC from the remote driver
back into VIR_ERR_NO_SUPPORT on the client, so that clients can
handle missing rpc functions the same whether the hypervisor driver
is local or remote. However, commit c1b22644 introduced a regression:
VIR_FROM_THIS changed from VIR_FROM_REMOTE to VIR_FROM_RPC, so the
special casing no longer works if the server uses the newer error
domain.
* src/rpc/virnetclientprogram.c
(virNetClientProgramDispatchError): Also cater to 0.9.3 and newer.
This patch fixes the bug shown in bugzilla 738778. It's not an nwfilter problem but a connection sharing / closure issue.
https://bugzilla.redhat.com/show_bug.cgi?id=738778
Depending on the speed / #CPUs of the machine you are using you may not see this bug all the time.
* conf/domain_conf.c: allocate memory to def->redirdevs in
virDomainDefParseXML such as VIR_ALLOC_N(def->redirdevs, n),
however, virDomainDefFree(def) hasn't released these memory.
* Detected in valgrind run:
==19820== 209 (16 direct, 193 indirect) bytes in 1 blocks are definitely lost in loss record 25 of 26
==19820== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==19820== by 0x4A13AF: virAllocN (memory.c:129)
==19820== by 0x4D4A0E: virDomainDefParseXML (domain_conf.c:7258)
==19820== by 0x4D4C93: virDomainDefParseNode (domain_conf.c:7512)
==19820== by 0x4D562F: virDomainDefParse (domain_conf.c:7465)
==19820== by 0x415863: testCompareXMLToXMLFiles (qemuxml2xmltest.c:35)
==19820== by 0x415982: testCompareXMLToXMLHelper (qemuxml2xmltest.c:80)
==19820== by 0x416D31: virtTestRun (testutils.c:140)
==19820== by 0x415604: mymain (qemuxml2xmltest.c:192)
==19820== by 0x416437: virtTestMain (testutils.c:689)
==19820== by 0x3CA7A1ECDC: (below main) (in /lib64/libc-2.12.so)
==19820==
==19820== LEAK SUMMARY:
==19820== definitely lost: 16 bytes in 1 blocks
==19820== indirectly lost: 193 bytes in 5 blocks
==19820== possibly lost: 0 bytes in 0 blocks
==19820== still reachable: 1,054 bytes in 21 blocks
* How to reproduce?
% valgrind -v --leak-check=full ./tests/qemuxml2xmltest
Signed-off-by: Alex Jia <ajia@redhat.com>
Mac OS X 10.6. Snow Leopard and probably other do not provide a mkfs
command to create filesystems. Macro MKFS then remained undefined and
did not provide any substitute, so that build failed on a missing
argument.
Struct virStoragePoolProbeResult was compiled in conditionaly, but
virStorageBackendFileSystemProbe used it unconditionaly. This patch
exempts the struct from conditional include.
Documentation did not specify, that some permissions are required on
target path for coredump for the user running the hypervisor.
Diff to v1:
- reword statements
The new doc text had a few readability issues. Also, the
monitor command text copied a bit too much from the attach case.
* src/libvirt-qemu.c (virDomainQemuMonitorCommand)
(virDomainQemuAttach): Fix typos and grammar.
Adjust qemuMigrationRun() to use migMaxBandwidth in qemuDomainObjPrivate
structure when setting qemu migration speed. Caller-specified 'resource'
parameter overrides migMaxBandwidth.
The qemu migration speed default is 32MiB/s as defined in migration.c
/* Migration speed throttling */
static int64_t max_throttle = (32 << 20);
There's no need to throttle migration when targeting a file, so set migration
speed to unlimited prior to migration, and restore to libvirt default value
after migration.
Default units is MB for migrate_set_speed monitor command, so
(INT64_MAX / (1024 * 1024)) is used for unlimited migration speed.
Tested with both json and text monitors.
Now that migration speed is stored in qemuDomainObjPrivate structure,
save the new value when invoking qemuDomainMigrateSetMaxSpeed().
Allow setting migration speed on inactive domain too.
The maximum bandwidth that can be consumed when migrating a domain
is better classified as an operational vs configuration parameter of
the dommain. As such, store this parameter in qemuDomainObjPrivate
structure.
Commit c246b025 added new functions, but forgot to export them,
resulting in a build failure when using modules.
* src/libvirt_private.syms (network.h): Export new functions.
Commit 973fcd8f introduced the ability for qemu to reject snapshot
reversion on an ABI incompatibility; but the very example that was
first proposed on-list[1] as a demonstration of an ABI incompatibility,
namely that of changing the max memory allocation, was not being
checked for, resulting in a cryptic failure when running with larger
max mem than what the snapshot was created with:
error: operation failed: Error -22 while loading VM state
This commit merely protects the three variables within mem that are
referenced by qemu_command.c, rather than all 7 (the other 4 variables
affect cgroup handling, but as far as I can tell, have no visible effect
to the qemu guest). This also affects migration and save file handling,
which are other places where we perform ABI compatibility checks.
[1] https://www.redhat.com/archives/libvir-list/2010-December/msg00331.html
* src/conf/domain_conf.c (virDomainDefCheckABIStability): Add
memory sizing checks.
Commit 498d783 cleans up some of virtual file names for parsing strings
in memory. This patch cleans up (hopefuly) the rest forgotten by the
first patch.
This patch also changes all of the previously modified "filenames" to
valid URI's replacing spaces for underscores.
Changes to v1:
- Replace all spaces for underscores, so that the strings form valid
URI's
- Replace spaces in places changed by commit 498d783
Regression introduced in commit 3881a470, due to an improper rebase
of a cleanup written beforehand but only applied after a rebased of
a refactoring that created a new function in commit 25fb3ef.
Also avoids passing NULL to printf %s.
* src/qemu/qemu_driver.c: In qemuDomainSnapshotForEachQcow2()
it free up the memory of qemu_driver->qemuImgBinary in the
cleanup tag which leads to the garbage value of qemuImgBinary
in qemu_driver struct and libvirtd crash when running
"virsh snapshot-create" command a second time.
Signed-off-by: Eric Blake <eblake@redhat.com>
'+' in strings get translated to ' ' when editing domains.
While xenDaemonDomainCreateXML() did URL-escape the sexpr,
xenDaemonDomainDefineXML() did not.
Remove the explicit urlencode() in xenDaemonDomainCreateXML() and add
the direct encoding calls to xend_op_ext() because it calls xend_post()
which uses "Content-Type: application/x-www-form-urlencoded". According
to <http://www.w3.org/TR/html4/interact/forms.html#h-17.13.4.1> this
requires all parameters to be url-encoded as specified in rfc1738.
Notice: virBufferAsprintf(..., "%s=%s", ...) is again replaced by three
calls to virBufferURIEncodeString() and virBufferAddChar() because '='
is a "reserved" character, which would get escaped by
virBufferURIEncodeString(), which - by the way - escapes anything not
c_isalnum().
Signed-off-by: Philipp Hahn <hahn@univention.de>
While parsing XML strings from memory, the previous convention in
libvirt was to set the virtual file name to "domain.xml" or something
similar. This could potentialy trick the user into looking for a file
named domain.xml on the disk in an attempt to fix the error.
This patch changes these filenames to something that can't be as easily
confused for a valid filename.
Examples of error messages:
---------------------------
Error while loading file from disk:
15:07:59.015: 527: error : catchXMLError:709 : /path/to/domain.xml:1: StartTag: invalid element name
<domain type='kvm'><
--------------------^
Error while parsing definition in memory:
15:08:43.581: 525: error : catchXMLError:709 : (domain definition):2: error parsing attribute name
<name>vm1</name>
--^
Regression introduced in commit d6f6b2d194. Running
'virsh snapshot-create dom' would mistakenly report that
disks can only be specified for disk snapshots.
* src/conf/domain_conf.c (virDomainSnapshotDefParseString): Only
give error about no disk support when <disk> was found.
These functions access internals of the opaque object, and do
not need any rpc counterpart. It could be argued that we should
have provided these when snapshot objects were first introduced,
since all the other vir*Ptr objects have at least a GetName accessor.
* include/libvirt/libvirt.h.in (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): Declare.
* src/libvirt.c (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): New
functions.
* src/libvirt_public.syms: Export them.
Xen PV domU's have no PCI bus. node_device_udev.c calls pci_system_init
which looks for /sys/bus/pci. If it does not find /sys/bus/pci (which it
won't in a Xen PV domU) it returns unsuccesfully (ENOENT), which libvirt
considers fatal. This makes libvirt unusable in this environment, even
though there are plenty of valid virtualisation options that work
there (LXC, UML, and QEmu spring to mind)
https://bugzilla.redhat.com/show_bug.cgi?id=709471
Signed-off-by: Soren Hansen <soren@linux2go.dk>
* src/rpc/virnettlscontext.c: fix memory leak on
virNetTLSContextValidCertificate.
* Detected in valgrind run:
==25667==
==25667== 6,085 (44 direct, 6,041 indirect) bytes in 1 blocks are definitely
lost in loss record 326 of 351
==25667== at 0x4005447: calloc (vg_replace_malloc.c:467)
==25667== by 0x4F2791F3: _asn1_add_node_only (structure.c:53)
==25667== by 0x4F27997A: _asn1_copy_structure3 (structure.c:421)
==25667== by 0x4F276A50: _asn1_append_sequence_set (element.c:144)
==25667== by 0x4F2743FF: asn1_der_decoding (decoding.c:1194)
==25667== by 0x4F22B9CC: gnutls_x509_crt_import (x509.c:229)
==25667== by 0x805274B: virNetTLSContextCheckCertificate
(virnettlscontext.c:1009)
==25667== by 0x804DE32: testTLSSessionInit (virnettlscontexttest.c:693)
==25667== by 0x804F14D: virtTestRun (testutils.c:140)
==25667==
==25667== 23,188 (88 direct, 23,100 indirect) bytes in 11 blocks are definitely
lost in loss record 346 of 351
==25667== at 0x4005447: calloc (vg_replace_malloc.c:467)
==25667== by 0x4F22B841: gnutls_x509_crt_init (x509.c:50)
==25667== by 0x805272B: virNetTLSContextCheckCertificate
(virnettlscontext.c:1003)
==25667== by 0x804DDD1: testTLSSessionInit (virnettlscontexttest.c:673)
==25667== by 0x804F14D: virtTestRun (testutils.c:140)
* How to reproduce?
% cd libvirt && ./configure && make && make -C tests valgrind
or
% valgrind -v --leak-check=full ./tests/virnettlscontexttest
Signed-off-by: Alex Jia <ajia@redhat.com>
