This introduces a new event type
VIR_DOMAIN_EVENT_ID_RTC_CHANGE
This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
long long utcoffset,
void *opaque);
If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.
* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
from QEMU monitor
The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_REBOOT
It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.
* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
reboot events
The libvirtd daemon impl will need to switch over to using the
new event APIs. To make this simpler, ensure all drivers currently
providing events support both the new APIs and old APIs.
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c, src/test/test_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Implement the new
virConnectDomainEvent(Dereg|Reg)isterAny driver entry points
The internal domain events APIs are designed to handle the lifecycle
events. This needs to be refactored to allow arbitrary new event
types to be handled.
* The signature of virDomainEventDispatchFunc changes to use
virConnectDomainEventGenericCallback instead of the lifecycle
event specific virConnectDomainEventCallback
* Every registered callback gains a unique ID to allow its
removal based on ID, instead of function pointer
* Every registered callback gains an 'eventID' to allow callbacks
for different types of events to be distinguished
* virDomainEventDispatch is adapted to filter out callbacks
whose eventID does not match the eventID of the event being
dispatched
* virDomainEventDispatch is adapted to filter based on the
domain name and uuid, if this filter is set for a callback.
* virDomainEvent type/detail fields are moved into a union to
allow different data fields for other types of events to be
added later
* src/conf/domain_event.h, src/conf/domain_event.c: Refactor
to allow handling of different types of events
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/xen/xen_driver.c: Change dispatch function signature
to use virConnectDomainEventGenericCallback
The current API for domain events has a number of problems
- Only allows for domain lifecycle change events
- Does not allow the same callback to be registered multiple times
- Does not allow filtering of events to a specific domain
This introduces a new more general purpose domain events API
typedef enum {
VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */
...more events later..
}
int virConnectDomainEventRegisterAny(virConnectPtr conn,
virDomainPtr dom, /* Optional, to filter */
int eventID,
virConnectDomainEventGenericCallback cb,
void *opaque,
virFreeCallback freecb);
int virConnectDomainEventDeregisterAny(virConnectPtr conn,
int callbackID);
Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature
eg
int myDomainEventCallback(virConnectPtr conn,
virDomainPtr dom,
int event,
int detail,
void *opaque)
{
...
}
virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
NULL, NULL);
The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature
* include/libvirt/libvirt.h.in: Define new APIs for registering
domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xenapi/xenapi_driver.c: Stub out new API entries
Before, this function would blindly accept an invalid def->dst
and then abuse the idx=-1 it would get from virDiskNameToIndex,
when passing it invalid strings like "xvda:disk" and "sda1".
Now, this function returns -1 upon failure.
* src/conf/domain_conf.c (virDomainDiskDefAssignAddress): as above.
Update callers.
* src/conf/domain_conf.h: Update prototype.
* src/qemu/qemu_conf.c: Update callers.
"virsh dominfo <vm>" crashes if there's no primary security driver set
since we only intialize the secmodel.model and secmodel.doi if we have
one. Attached patch checks for securityPrimaryDriver instead of
securityDriver since the later is always set in qemudSecurityInit().
Closes: http://bugs.debian.org/574359
Attempt to turn on vhost-net mode for devices of type NETWORK, BRIDGE,
and DIRECT (macvtap).
* src/qemu/qemu_conf.h: add vhostfd to qemuBuildHostNetStr prototype
add qemudOpenVhostNet prototype new flag to set when :,vhost=" found in
qemu help
* src/qemu/qemu_conf.c: * set QEMUD_CMD_FLAG_VNET_HOST is ",vhost=" found
in qemu help
- qemudOpenVhostNet - opens /dev/vhost-net to pass to qemu if everything
is in place to use it.
- qemuBuildHostNetStr - add vhostfd to commandline if it's not empty
(higher levels decide whether or not to fill it in)
- qemudBuildCommandLine - if /dev/vhost-net is successfully opened, add
its fd to tapfds array so it isn't closed on qemu exec, and populate
vhostfd_name to be passed in to commandline builder.
* src/qemu/qemu_driver.c: add filler 0 for new arg to qemuBuildHostNetStr,
along with a note that this must be implemented in order for hot-plug of
vhost-net virtio devices to work properly (once qemu "netdev_add" monitor
command is implemented).
Currently no command can be sent to a qemu process while another job is
active. This patch adds support for signaling long-running jobs (such as
migration) so that other threads may request predefined operations to be
done during such jobs. Two signals are defined so far:
- QEMU_JOB_SIGNAL_CANCEL
- QEMU_JOB_SIGNAL_SUSPEND
The first one is used by qemuDomainAbortJob.
The second one is used by qemudDomainSuspend for suspending a domain
during migration, which allows for changing live migration into offline
migration. However, there is a small issue in the way qemudDomainSuspend
is currently implemented for migrating domains. The API calls returns
immediately after signaling migration job which means it is asynchronous
in this specific case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
* src/qemu/qemu_driver.c (qemudDomainAttachSCSIDisk): The ".controller"
member is an index, and *may* be 0. As such, the commit that we're
reverting broke SCSI disk hot-plug on controller 0.
Reported by Wolfgang Mauerer.
We need to call PrepareHostdevs to determine the USB device path before
any security calls. PrepareHostUSBDevices was also incorrectly skipping
all USB devices.
* src/qemu/qemu_conf.c: add the ",readonly=on" for read-only disks
and also parse it back in qemuParseCommandLineDisk()
* tests/qemuxml2argvtest.c
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.args
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.xml:
add a specific regression test
Currently if you dump the core of a qemu guest with
qemudDomainCoreDump, subsequent commands will hang
up libvirtd. This is because qemudDomainCoreDump
uses qemuDomainWaitForMigrationComplete, which expects
the qemuDriverLock to be held when it's called. This
patch does the simple thing and moves the qemuDriveUnlock
to the end of the qemudDomainCoreDump so that the driver
lock is held for the entirety of the call (as it is done
in qemudDomainSave). We will probably want to make the
lock more fine-grained than that in the future, but
we can fix both qemudDomainCoreDump and qemudDomainSave
at the same time.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The code to add job support into libvirtd caused a problem
in qemudDomainSetVcpus. In particular, a qemuDomainObjEndJob()
call was added at the end of the function, but a
corresponding qemuDomainObjBeginJob() was not. Additionally,
a call to qemuDomainObj{Enter,Exit}Monitor() was also missed
in qemudDomainHotplugVcpus(). These missing calls conspired to
cause a hang in the libvirtd process after the command was
finished. Fix this by adding the missing calls.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
As previously discussed[1], this patch removes the
qemudDomainSetMaxMemory() function, since it doesn't
work. This means that instead of getting somewhat
cryptic errors, you will now get:
error: Unable to change MaxMemorySize
error: this function is not supported by the hypervisor: virDomainSetMaxMemory
Which describes the situation perfectly.
[1] https://www.redhat.com/archives/libvir-list/2010-February/msg00928.html
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When using the JSON monitor, qemuMonitorJSONExtractCPUInfo
was returning 0 on success. Unfortunately, higher levels of
the cpuinfo code expect that it returns the number of CPUs
it found on success. This one-line patch fixes it so that
it returns the correct number. This makes "virsh vcpuinfo <domain>"
work when using the JSON monitor.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
A few more non-literal format strings in error log messages have crept
in. Fix them in the standard way - turn the format string into "%s"
with the original string as the arg.
When adding domainMemoryStats API support for the qemu driver, I didn't
follow the locking rules exactly. The job condition must be held when
executing monitor commands. This corrects the segfaults I was seeing
when calling domainMemoryStats in a multi-threaded environment.
* src/qemu/qemu_driver.c: in qemudDomainMemoryStats() add missing
calls to qemuDomainObjBeginJob/qemuDomainObjEndJob
doTunnelSendAll function (used by QEMU migration) uses a 64k buffer on
the stack, which could be problematic. This patch replaces that with a
buffer from the heap.
While in the neighborhood, this patch also improves error reporting in
the case that saferead fails - previously, virStreamAbort() was called
(resetting errno) before reporting the error. It's been changed to
report the error first.
* src/qemu/qemu_driver.c: fix doTunnelSendAll() to use a malloc'ed
buffer
* src/qemu/qemu_driver.c (qemudDomainAttachSCSIDisk): Handle
the (theoretical) case of an empty controller list, so that
clang does not think the subsequent dereference of "cont"
would dereference an undefined variable (due to preceding
loop not iterating even once).
* src/qemu/qemu_driver.c (qemudDomainRestore): A corrupt save file
(in particular, a too-large header.xml_len value) would cause an
unwarranted out-of-memory error. Do not trust the just-read
header.xml_len. Instead, merely use that as a hint, and
read/allocate up to that number of bytes from the file.
Also verify that header.xml_len is positive; if it were negative,
passing it to virFileReadLimFD could cause trouble.
The code erroneously searched the entire "reply" for a comma, when
its intent was to search only that portion after "balloon: actual="
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetMemoryStats):
Search for "," only starting *after* the BALLOON_PREFIX string.
Otherwise, we'd be more prone to false positives.
Changeset
commit 5073aa994a
Author: Cole Robinson <crobinso@redhat.com>
Date: Mon Jan 11 11:40:46 2010 -0500
Added support for product/vendor based passthrough, but it only
worked at the security driver layer. The main guest XML config
was not updated with the resolved bus/device ID. When the QEMU
argv refactoring removed use of product/vendor, this then broke
launching guests.
THe solution is to move the product/vendor resolution up a layer
into the QEMU driver. So the first thing QEMU does is resolve
the product/vendor to a bus/device and updates the XML config
with this info. The rest of the code, including security drivers
and QEMU argv generated can now rely on bus/device always being
set.
* src/util/hostusb.c, src/util/hostusb.h: Split vendor/product
resolution code out of usbGetDevice and into usbFindDevice.
Add accessors for bus/device ID
* src/security/virt-aa-helper.c, src/security/security_selinux.c,
src/qemu/qemu_security_dac.c: Remove vendor/product from the
usbGetDevice() calls
* src/qemu/qemu_driver.c: Use usbFindDevice to resolve vendor/product
into a bus/device ID
The pci_del command is not being ported to QMP. Convert all the
QEMU hotplug code over to use device_del whenever it is available
to avoid the pci_del problem
* src/qemu/qemu_driver.c: Convert unplug code to device_del
Previously hot-unplug could not be supported for USB devices
in QEMU, since usb_del required the guest visible address
which libvirt never knows. With 'device_del' command we can
now unplug based on device alias, so support that.
* src/qemu/qemu_driver.c: Use device_del to remove USB devices
QEMU has a monitor command 'set_cpu' which allows a specific
CPU to be toggled between online& offline state. libvirt CPU
hotplug does not work in terms of individual indexes CPUs.
Thus to support this, we iteratively toggle the online state
when the total number of vCPUs is adjusted via libvirt
NB, currently untested since QEMU segvs when running this!
* src/qemu/qemu_driver.c: Toggle online state for CPUs when
doing hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
monitor API for toggling a CPU's online status via 'set_cpu
The QMP code was running query-migration instead of query-migrate.
This doesn't work so well
* src/qemu/qemu_monitor_json.c: s/query-migration/query-migrate/
The code to remove the cgroup after QEMU failed to startup could
be obscuring a real error from earlier on. It is not neccessary
to raise an error in this case, so tell cgroups to keep quiet
* src/qemu/qemu_driver.c: Don't raise cgroups error in QEMU start
cleanup code.
The QEMU hotunplug code for PCI devices was looking at host
devices in the guest config without first filtering non
PCI devices. This means it was reading garbage
* src/qemu/qemu_driver.c: Filter out non-PCI devices
Commit 3c12a67b76 added
a dependency on the NFS_SUPER_MAGIC macro, which is
defined in linux/magic.h. Unfortunately linux/magic.h
is not available in RHEL-5, and causes a compile error.
Just define it locally, since this is something that
can't change.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Move *all* file operations related to creation and writing of libvirt
header to the domain save file into a hook function that is called by
virFileOperation. First try to call virFileOperation as root. If that
fails with EACCESS, and (in the case of Linux) statfs says that we're
trying to save the file on an NFS share, rerun virFileOperation,
telling it to fork a child process and setuid to the qemu user. This
is the only way we can successfully create a file on a root-squashed
NFS server.
This patch (along with setting dynamic_ownership=0 in qemu.conf)
makes qemudDomainSave work on root-squashed NFS.
* src/qemu/qemu_driver.c: provide new qemudDomainSaveFileOpHook()
utility, use it in qemudDomainSave() if normal creation of the
file as root failed, and after checking the filesystem type for
the storage is NFS. In that case we also bypass the security
driver, as this would fail on NFS.
If qemudDomainRestore fails to open the domain save file, create a
pipe, then fork a process that does setuid(qemu_user) and opens the
file, then reads this file and stuffs it into the pipe. the parent
libvirtd process will use the other end of the pipe as its fd, then
reap the child process after it's done reading.
This makes domain restore work on a root-squash NFS share that is only
visible to the qemu user.
* src/qemu/qemu_driver.c: add new qemudOpenAsUID() helper function,
and use it in qemudDomainRestore() if reading as root directly failed.
The USB/PCI device hotplug code for the QEMU driver was forgetting
to allocate a unique device alias.
* src/qemu/qemu_driver.c: Fill in device alias for USB/PCI devices
The code assumed that 'device_add' returned an empty string upon
success. This is not true, it sometimes prints random debug info.
THus we need to check for an explicit fail string
* src/qemu/qemu_monitor_text.c: Fix error checking of the device_add
monitor command
When a VM save attempt failed, the VM would be left in a paused
state. It is neccessary to resume CPU execution upon failure
if it was running originally
* src/qemu/qemu_driver.c: Resume CPUs upon save failure
This supports cancellation of jobs for the QEMU driver against
the virDomainMigrate, virDomainSave and virDomainCoreDump APIs.
It is not yet supported for the virDomainRestore API, although
it is desirable.
* src/qemu/qemu_driver.c: Issue 'migrate_cancel' command if
virDomainAbortJob is issued during a migration operation
* tools/virsh.c: Add a domjobabort command
This provides the internal glue for the driver API
* src/driver.h: Internal API contract
* src/libvirt.c, src/libvirt_public.syms: Connect public API
to driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out entry points
Introduce support for virDomainGetJobInfo in the QEMU driver. This
allows for monitoring of any API that uses the 'info migrate' monitor
command. ie virDomainMigrate, virDomainSave and virDomainCoreDump
Unfortunately QEMU does not provide a way to monitor incoming migration
so we can't wire up virDomainRestore yet.
The virsh tool gets a new command 'domjobinfo' to query status
* src/qemu/qemu_driver.c: Record virDomainJobInfo and start time
in qemuDomainObjPrivatePtr objects. Add generic shared handler
for calling 'info migrate' with all migration based APIs.
* src/qemu/qemu_monitor_text.c: Fix parsing of 'info migration' reply
* tools/virsh.c: add new 'domjobinfo' command to query progress
The internal glue layer for the new pubic API
* src/driver.h: Define internal driver API contract
* src/libvirt.c, src/libvirt_public.syms: Wire up public
API to internal driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub new entry point
A number of the error messages raised when parsing USB devices
refered to PCI devices by mistake
* src/qemu/qemu_conf.c: s/PCI/USB/ in qemuParseCommandLineUSB()
when the underlying qemu supports the drive/device model and the
controller has been added this way.
* src/qemu/qemu_driver.c: use qemuMonitorDelDevice() when detaching
PCI controller and if supported
* src/qemu/qemu_monitor.[ch]: add new qemuMonitorDelDevice() function
* src/qemu/qemu_monitor_json.[ch]: JSON backend for DelDevice command
* src/qemu/qemu_monitor_text.[ch]: Text backend for DelDevice command
* src/qemu/qemu_driver.c: in qemudDomainDetachPciControllerDevice()
when a controller is not present in the system anymore, the PCI
address must be deleted from libvirt's hashtable because it can
be re-used for other purposes.
* src/qemu/qemu_driver.c: in qemudDomainAttachDevice(), one must not
delete the data part when the operation succeeds because it is
required later on. The correct pattern to handlethe parsed
representation of the device information on success
is dev->data.controller = NULL; virDomainDeviceDefFree(dev);,
which leaves the structure pointed at by data in memory.
Allow an arbitrary timezone with QEMU by setting the $TZ environment
variable when launching QEMU
* src/qemu/qemu_conf.c: Set TZ environment variable if a timezone
is requested
* tests/qemuxml2argvtest.c: Add test case for timezones
* tests/qemuxml2argvdata/qemuxml2argv-clock-france.xml,
tests/qemuxml2argvdata/qemuxml2argv-clock-france.args: Data
for timezone tests
This allows QEMU guests to be started with an arbitrary clock
offset
The test case can't actually be enabled, since QEMU argv expects
an absolute timestring, and this will obviously change every
time the test runs :-( Hopefully QEMU will allow a relative
time offset in the future.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Use the -rtc arg
if available to support variable clock offset mode
* tests/qemuhelptest.c: Add QEMUD_CMD_FLAG_RTC for qemu 0.12.1
* qemuxml2argvdata/qemuxml2argv-clock-variable.args,
qemuxml2argvdata/qemuxml2argv-clock-variable.xml,
qemuxml2argvtest.c: Test case, except we can't actually enable
it yet.
The XML will soon be extended to allow more than just a simple
localtime/utc boolean flag. This change replaces the plain
'int localtime' with a separate struct to prepare for future
extension
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a new
virDomainClockDef structure
* src/libvirt_private.syms: Export virDomainClockOffsetTypeToString
and virDomainClockOffsetTypeFromString
* src/qemu/qemu_conf.c, src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
src/xen/xm_internal.c: Updated to use new structure for localtime
If the hostname as returned by "gethostname" resolves
to "localhost" (as it does with the broken Fedora-12
installer), then live migration will fail because the
source will try to migrate to itself. Detect this
situation up-front and abort the live migration before
we do any real work.
* src/util/util.h src/util/util.c: add a new virGetHostnameLocalhost
with an optional localhost check, and rewire virGetHostname() to use
it
* src/libvirt_private.syms: expose the new function
* src/qemu/qemu_driver.c: use it in qemudDomainMigratePrepare2()
This patch sets or unsets the IFF_VNET_HDR flag depending on what device
is used in the VM. The manipulation of the flag is done in the open
function and is only fatal if the IFF_VNET_HDR flag could not be cleared
although it has to be (or if an ioctl generally fails). In that case the
macvtap tap is closed again and the macvtap interface torn.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: pass qemuCmdFlags to
qemudPhysIfaceConnect()
* src/util/macvtap.c src/util/macvtap.h: add vnet_hdr boolean to
openMacvtapTap(), and private function configMacvtapTap()
* src/qemu/qemu_driver.c: add extra qemuCmdFlags when calling
qemudPhysIfaceConnect()
Support virtio-serial controller and virtio channel in QEMU backend.
Will output
the following for virtio-serial controller:
-device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4,max_ports=16,vectors=4
and the following for a virtio channel:
-chardev pty,id=channel0 \
-device
virtserialport,bus=virtio-serial0.0,chardev=channel0,name=org.linux-kvm.port.0
* src/qemu/qemu_conf.c: Add argument output for virtio
* tests/qemuxml2argvtest.c
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args: Add test for
QEMU command line generation
Add support for virtio-serial by defining a new 'virtio' channel target type
and a virtio-serial controller. Allows the following to be specified in a
domain:
<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
<channel type='pty'>
<target type='virtio' name='org.linux-kvm.port.0'/>
<address type='virtio-serial' controller='0' bus='0'/>
</channel>
* docs/schemas/domain.rng: Add virtio-serial controller and virtio
channel type.
* src/conf/domain_conf.[ch]: Domain parsing/serialization for
virtio-serial controller and virtio channel.
* tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml
parsing test
* src/libvirt_private.syms src/qemu/qemu_conf.c:
virDomainDefAddDiskControllers() renamed to
virDomainDefAddImplicitControllers()
Currently we just error with ex. 'virbr0: No such device'.
Since we are using public API calls here, we need to ensure that any
raised error is properly saved and restored, since API entry points
always reset messages.
Rework and simplification of teardown of the macvtap device.
Basically all devices with the same MAC address and link device are kept
alive and not attempted to be torn down. If a macvtap device linked to a
physical interface with a certain MAC address 'M' is to be created it
will automatically fail if the interface is 'up'ed and another macvtap
with the same properties (MAC addr 'M', link dev) happens to be 'up'.
This will prevent the VM from starting or the device from being attached
to a running VM. Stale interfaces are assumed to be there for some
reason and not stem from libvirt.
In the VM shutdown path, it's assuming that an interface name is always
available so that if the device type is DIRECT it can be torn down
using its name.
* src/util/macvtap.h src/libvirt_macvtap.syms: change of deleting routine
* src/util/macvtap.c: cleanups and change of deleting routine
* src/qemu/qemu_driver.c: change cleanup on shutdown
* src/qemu/qemu_conf.c: don't delete Macvtap in qemudPhysIfaceConnect()
The QEMU JSON monitor changed balloon commands to return/accept
bytes instead of kilobytes. Update libvirt to cope with this
* src/qemu/qemu_monitor_json.c: Expect/use bytes for ballooning
Similar to the Set*Mem commands, this implementation was bogus and
misleading. Make it clear this is a hotplug only operation, and that the
hotplug piece isn't even implemented.
Also drop the overkill maxvcpus validation: we don't perform this check
at XML define time so clearly no one is missing it, and there is
always the risk that our info will be out of date, possibly preventing
legitimate CPU values.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
SetMem and SetMaxMem are hotplug only APIs, any persistent config
changes are supposed to go via XML definition. The original implementation
of these calls were incorrect and had the nasty side effect of making
a psuedo persistent change that would be lost after libvirtd restart
(I didn't know any better).
Fix these APIs to rightly reject non running domains.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The plain QEMU tree does not include 'thread_id' in the JSON
output. Thus we need to treat it as non-fatal if missing.
* src/qemu/qemu_monitor_json.c: Treat missing thread_id as non-fatal
A typo in the check for the primary IDE controller could cause
a crash on restore depending on the exact guest config.
* src/qemu/qemu_conf.c: Fix s/video/controller/ typo & slot
number typo
Current error reporting for JSON mode returns the full JSON
command string and full JSON error string. This is not very
user friendly, so this change makes the error report only
contain the basic command name, and friendly error message
description string. The full JSON data is logged instead.
* src/qemu/qemu_monitor_json.c: Always return the 'desc' field from
the JSON error message to users.
When in JSON mode, QEMU requires that 'qmp_capabilities' is run as
the first command in the monitor. This is a no-op when run in the
text mode monitor
* src/qemu/qemu_driver.c: Run capabilities negotiation when
connecting to the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
support for the 'qmp_capabilities' command, no-op in text mode.
This part adds support for qemu making a macvtap tap device available
via file descriptor passed to qemu command line. This also attempts to
tear down the macvtap device when a VM terminates. This includes support
for attachment and detachment to/from running VM.
* src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the
QEmu driver
Current PCI addresses are allocated at time of VM startup.
To make them truely persistent, it is neccessary to do this
at time of virDomainDefine/virDomainCreate. The code in
qemuStartVMDaemon still remains in order to cope with upgrades
from older libvirt releases
* src/qemu/qemu_driver.c: Rename existing qemuAssignPCIAddresses
to qemuDetectPCIAddresses. Add new qemuAssignPCIAddresses which
does auto-allocation upfront. Call qemuAssignPCIAddresses from
qemuDomainDefine and qemuDomainCreate to assign PCI addresses that
can then be persisted. Don't clear PCI addresses at shutdown if
they are intended to be persistent
The old text mode monitor prompts for a password when disks are
encrypted. This interactive approach doesn't work for JSON mode
monitor. Thus there is a new 'block_passwd' command that can be
used.
* src/qemu/qemu_driver.c: Split out code for looking up a disk
secret from findVolumeQcowPassphrase, into a new method
getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also
set the disk encryption password via the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
support for the 'block_passwd' monitor command.
Since c26cb9234f, the dname
parameter has been ignored by these two functions. Use it.
* src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Honor dname
parameter once again.
(qemudDomainMigratePrepare2): Likewise.
All other libvirt functions use array first and then number of elements
in that array. Let's make cpuDecode follow this rule.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With QEMU >= 0.12 the host and guest side of disks no longer have
the same naming convention. Specifically the host side will now
get a 'drive-' prefix added to its name. The 'info blockstats'
monitor command returns the host side name, so it is neccessary
to strip this off when looking up stats since libvirt stores the
guest side name !
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix
string to a defined constant
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip
off 'drive-' prefix (if found) when looking up disk stats
Currently the timeout for reading startup output is 3 seconds. If the
host is under any sort of load, we can easily trigger this. Lets bump
it to 30 seconds.
Since the polling loop checks to see if the process has died, we shouldn't
erroneously hit this timeout if qemu bombs (only if it is stuck in some
infinite loop).
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr
args as mandatory non-null so the compiler can warn of mistakes
* src/conf/domain_event.h: All virConnectPtr args must be non-null
* src/qemu/qemu_conf.h: qemudBuildCommandLine and
qemudNetworkIfaceConnect() must be given non-null connection
* tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to
qemudBuildCommandLine()
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in cpu_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match
All callers now pass a NULL virConnectPtr into the USB/PCi device
iterator functions. Therefore the virConnectPtr arg can now be
removed from these functions
* src/util/hostusb.h, src/util/hostusb.c: Remove virConnectPtr
from usbDeviceFileIterate
* src/util/pci.c, src/util/pci.h: Remove virConnectPtr arg from
pciDeviceFileIterate
* src/qemu/qemu_security_dac.c, src/security/security_selinux.c: Update
to drop redundant virConnectPtr arg
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
Use 'unsigned long long' for QEMU flags
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in security_driver.{h,c} and update all callers to
match
The security driver was mistakenly initialized before the QEMU
config file was loaded. This prevents it being turned off again.
The capabilities XML was also getting the wrong security driver
name, due to the stacked driver arrangement.
* src/qemu/qemu_driver.c: Fix initialization order and capabilities
model name
When restoring from a saved guest image, the XML would already
contain the PCI slot ID of the IDE controller & video card.
The attempt to explicitly reserve this upfront would thus fail
everytime.
* src/qemu/qemu_conf.c: Reserve IDE controller / video card
slot at time of need, rather than upfront
If the primary security driver (SELinux/AppArmour) was disabled
then the secondary QEMU DAC security driver was also disabled.
This is mistaken, because the latter must be active at all times
* src/qemu/qemu_driver.c: Ensure DAC driver is always active
To allow devices to be hot(un-)plugged it is neccessary to ensure
they all have a unique device aliases. This fixes the hotplug
methods to assign device aliases before invoking the monitor
commands which need them
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Expose methods
for assigning device aliases for disks, host devices and
controllers
* src/qemu/qemu_driver.c: Assign device aliases when hotplugging
all types of device
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address-device.args:
Update for changed hostdev naming scheme
This patch re-arranges the QEMU device alias assignment code to
make it easier to call into the same codeblock when performing
device hotplug. The new code has the ability to skip over already
assigned names to facilitate hotplug
* src/qemu/qemu_driver.c: Call qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_conf.h: Export qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_driver.c: Merge the legacy disk/network alias
assignment code into the main methods
The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
Use a single network alias naming scheme regardless of NIC type
or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
for new simpler naming scheme
The QEMU 0.12.x tree has the -netdev command line argument, but not
corresponding monitor command. We can't enable the former, without
the latter since it will break hotplug/unplug.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage
until 0.13 at earliest
* tests/qemuxml2argvtest.c: Add test for -netdev syntax
* tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test
data files for -netdev syntax
PCI disk, disk controllers, net devices and host devices need to
have PCI addresses assigned before they are hot-plugged
* src/qemu/qemu_conf.c: Add APIs for ensuring a device has an
address and releasing unused addresses
* src/qemu/qemu_driver.c: Ensure all devices have addresses
when hotplugging.
The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.
It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
list of existing PCI addresses, and allocating new addresses.
Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
qemuStartVMDaemon() method, as a prelude to moving it into the
'define' method. Update list of allocated addresses when connecting
to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
tests/qemuxml2xmltest.c: Remove USB product test since all
passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
unused data files
Since QEMU startup uses the new -device argument, the hotplug
code needs todo the same. This converts disk, network and
host device hotplug to use the device_add command
* src/qemu/qemu_driver.c: Use new device_add monitor APIs
whereever possible
The way QEMU is started has been changed to use '-device' and
the new style '-drive' syntax. This needs to be mirrored in
the hotplug code, requiring addition of two new APIs.
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Define APIs
qemuMonitorAddDevice() and qemuMonitorAddDrive()
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Implement the new monitor APIs
To allow for better code reuse from hotplug methods, the code for
generating PCI/USB hostdev arg values is split out into separate
methods
* qemu/qemu_conf.h, qemu/qemu_conf.c: Introduce new APis for
qemuBuildPCIHostdevPCIDevStr, qemuBuildUSBHostdevUsbDevStr
and qemuBuildUSBHostdevDevStr
All the helper functions for building command line arguments
now return a 'char *', instead of acepting a 'char **' or
virBufferPtr argument
* qemu/qemu_conf.c: Standardize syntax for building args
* qemu/qemu_conf.h: Export all functions for building args
* qemu/qemu_driver.c: Update for changed syntax for building
NIC/hostnet args
Similar to the race fixed by
be34c3c7ef, make sure
to wait around for KVM to release the resources from
a hot-detached PCI device before attempting to
rebind that device to the host driver.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The QEMU driver contained code to generate a -device string for piix4-ide, but
wasn't using it. This change removes this string generation. It also adds a
comment explaining why IDE and FDC controllers don't generate -device strings.
The change also generates an error if a sata controller is specified for a QEMU
domain, as this isn't supported.
* src/qemu/qemu_conf.c: Remove VIR_DOMAIN_CONTROLLER_TYPE_IDE handler in
qemuBuildControllerDevStr(). Ignore IDE and FDC controllers. Error if
SATA controller is discovered. Add comments.
On RHEL-5 the qemu-kvm binary is located in /usr/libexec.
To reduce confusion for people trying to run upstream libvirt
on RHEL-5 machines, make the qemu driver look in /usr/libexec
for the qemu-kvm binary.
To make this work, I modified virFindFileInPath to handle an
absolute path correctly. I also ran into an issue where
NULL was sometimes being passed for the file parameter
to virFindFileInPath; it didn't crash prior to this patch
since it was building paths like /usr/bin/(null). This
is non-standard behavior, though, so I added a NULL
check at the beginning.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
If you shutdown libvirtd while a domain with PCI
devices is running, then try to restart libvirtd,
libvirtd will crash.
This happens because qemuUpdateActivePciHostdevs() is calling
pciDeviceListSteal() with a dev of 0x0 (NULL), and then trying
to dereference it. This patch fixes it up so that
qemuUpdateActivePciHostdevs() steals the devices after first
Get()'ting them, avoiding the crash.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/qemu/qemu_monitor_text.c (qemuMonitorTextAttachDrive): Most other
failures in this function would "goto cleanup", but one mistakenly
returned directly, skipping the cleanup and resulting in a leak.
In addition, iterating the "try_command" loop would clobber, and
thus leak, the "cmd" allocated on the first iteration,
so be careful to free it in addition to "reply" beforehand.
The KVM build of QEMU includs the thread ID of each vCPU in the
'query-cpus' output. This is required for pinning guests to
particular host CPUs
* src/qemu/qemu_monitor_json.c: Extract 'thread_id' from CPU info
* src/util/json.c, src/util/json.h: Declare returned strings
to be const
* src/qemu/qemu_monitor.c: Wire up JSON mode for qemuMonitorGetPtyPaths
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Fix
const correctness. Add missing error message in the function
qemuMonitorJSONGetAllPCIAddresses. Add implementation of the
qemuMonitorGetPtyPaths function calling 'query-chardev'.
Certain hypervisors (like qemu/kvm) map the PCI bar(s) on
the host when doing device passthrough. This can lead to a race
condition where the hypervisor is still cleaning up the device while
libvirt is trying to re-attach it to the host device driver. To avoid
this situation, we look through /proc/iomem, and if the hypervisor is
still holding onto the bar (denoted by the string in the matcher variable),
then we can wait around a bit for that to clear up.
v2: Thanks to review by DV, make sure we wait the full timeout per-device
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Fix a small problem with the qemu memory stats parsing algorithm. If qemu
reports a stat that libvirt does not recognize, skip past it so parsing can
continue. This corrects a potential infinite loop in the parsing code that can
only be triggered if new statistics are added to qemu.
* src/qemu/qemu_monitor_text.c: qemuMonitorParseExtraBalloonInfo add a
skip for extra ','
The loop looking for the controller associated with a SCI drive had
an off by one, causing it to miss the last controller.
* src/qemu/qemu_driver.c: Fix off-by-1 in searching for SCSI
drive hotplug
The hotplug code in QEMU was leaking memory because although the
inner device object was being moved into the main virDomainDefPtr
config object, the outer container virDomainDeviceDefPtr was not.
* src/qemu/qemu_driver.c: Clarify code to show that the inner
device object is owned by the main domain config upon
successfull attach.
Add the ability to turn off dynamic management of file permissions
for libvirt guests.
* qemu/libvirtd_qemu.aug: Support 'dynamic_ownership' flag
* qemu/qemu.conf: Document 'dynamic_ownership' flag.
* qemu/qemu_conf.c: Load 'dynamic_ownership' flag
* qemu/test_libvirtd_qemu.aug: Test 'dynamic_ownership' flag
The hotplug code was not correctly invoking the security driver
in error paths. If a hotplug attempt failed, the device would
be left with VM permissions applied, rather than restored to the
original permissions. Also, a CDROM media that is ejected was
not restored to original permissions. Finally there was a bogus
call to set hostdev permissions in the hostdev unplug code
* qemu/qemu_driver.c: Fix security driver usage in hotplug/unplug
If there is a problem with VM startup, PCI devices may be left
assigned to pci-stub / pci-back. Adding a call to reattach
host devices in the cleanup path is required.
* qemu/qemu_driver.c: qemuDomainReAttachHostDevices() when
VM startup fails
Remove all the QEMU driver calls for setting file ownership and
process uid/gid. Instead wire in the QEMU DAC security driver,
stacking it ontop of the primary SELinux/AppArmour driver.
* qemu/qemu_driver.c: Switch over to new DAC security driver
This new security driver is responsible for managing UID/GID changes
to the QEMU process, and any files/disks/devices assigned to it.
* qemu/qemu_conf.h: Add flag for disabling automatic file permission
changes
* qemu/qemu_security_dac.h, qemu/qemu_security_dac.c: New DAC driver
for QEMU guests
* Makefile.am: Add new files
Pulling the disk labelling code out of the exec hook, and into
libvirtd will allow it to access shared state in the daemon. It
will also make debugging & error reporting easier / more reliable.
* qemu/qemu_driver.c: Move initial disk labelling calls up into
libvirtd. Add cleanup of disk labels upon failure
If a VM fails to start, we can't simply free the security label
strings, we must call the domainReleaseSecurityLabel() method
otherwise the reserved 'mcs' level will be leaked in SElinux
* src/qemu/qemu_driver.c: Invoke domainReleaseSecurityLabel()
when domain fails to start
The current security driver architecture has the following
split of logic
* domainGenSecurityLabel
Allocate the unique label for the domain about to be started
* domainGetSecurityLabel
Retrieve the current live security label for a process
* domainSetSecurityLabel
Apply the previously allocated label to the current process
Setup all disk image / device labelling
* domainRestoreSecurityLabel
Restore the original disk image / device labelling.
Release the unique label for the domain
The 'domainSetSecurityLabel' method is special because it runs
in the context of the child process between the fork + exec.
This is require in order to set the process label. It is not
required in order to label disks/devices though. Having the
disk labelling code run in the child process limits what it
can do.
In particularly libvirtd would like to remember the current
disk image label, and only change shared image labels for the
first VM to start. This requires use & update of global state
in the libvirtd daemon, and thus cannot run in the child
process context.
The solution is to split domainSetSecurityLabel into two parts,
one applies process label, and the other handles disk image
labelling. At the same time domainRestoreSecurityLabel is
similarly split, just so that it matches the style. Thus the
previous 4 methods are replaced by the following 6 new methods
* domainGenSecurityLabel
Allocate the unique label for the domain about to be started
No actual change here.
* domainReleaseSecurityLabel
Release the unique label for the domain
* domainGetSecurityProcessLabel
Retrieve the current live security label for a process
Merely renamed for clarity.
* domainSetSecurityProcessLabel
Apply the previously allocated label to the current process
* domainRestoreSecurityAllLabel
Restore the original disk image / device labelling.
* domainSetSecurityAllLabel
Setup all disk image / device labelling
The SELinux and AppArmour drivers are then updated to comply with
this new spec. Notice that the AppArmour driver was actually a
little different. It was creating its profile for the disk image
and device labels in the 'domainGenSecurityLabel' method, where as
the SELinux driver did it in 'domainSetSecurityLabel'. With the
new method split, we can have consistency, with both drivers doing
that in the domainSetSecurityAllLabel method.
NB, the AppArmour changes here haven't been compiled so may not
build.
The QEMU driver is doing 90% of the calls to check for static vs
dynamic labelling. Except it is forgetting todo so in many places,
in particular hotplug is mistakenly assigning disk labels. Move
all this logic into the security drivers themselves, so the HV
drivers don't have to think about it.
* src/security/security_driver.h: Add virDomainObjPtr parameter
to virSecurityDomainRestoreHostdevLabel and to
virSecurityDomainRestoreSavedStateLabel
* src/security/security_selinux.c, src/security/security_apparmor.c:
Add explicit checks for VIR_DOMAIN_SECLABEL_STATIC and skip all
chcon() code in those cases
* src/qemu/qemu_driver.c: Remove all checks for VIR_DOMAIN_SECLABEL_STATIC
or VIR_DOMAIN_SECLABEL_DYNAMIC. Add missing checks for possibly NULL
driver entry points.
* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c
src/network/bridge_driver.c src/qemu/qemu_driver.c
src/uml/uml_driver.c: virFileMakePath returns 0 for success, or the
value of errno on failure, so error checking should be to test
if non-zero, not if lower than 0
The test expected all environment variables copied in qemudBuildCommandLine
to have known values. So all of them have to be either set to a known value
or be unset. SDL_VIDEODRIVER and QEMU_AUDIO_DRV are not handled at all but
should be handled. Unset both, otherwise the test will fail if they are set
in the testing environment.
* src/qemu/qemu_conf.c: add a comment about copied environment variables
and qemuxml2argvtest
* tests/qemuxml2argvtest.c: unset SDL_VIDEODRIVER and QEMU_AUDIO_DRV
Invoking the virConnectGetCapabilities() method causes the QEMU
driver to rebuild its internal capabilities object. Unfortunately
it was forgetting to register the custom domain status XML hooks
again.
To avoid this kind of error in the future, the code which builds
capabilities is refactored into one single method, which can be
called from all locations, ensuring reliable rebuilds.
* src/qemu/qemu_driver.c: Fix rebuilding of capabilities XML and
guarentee it is always consistent
I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
VIR_DEBUG
VIR_DEBUG0
VIR_ERROR
VIR_ERROR0
VIR_INFO
VIR_WARN
VIR_WARN0
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU's command line equivalent for the following domain XML fragment
<vcpus>2</vcpus>
<cpu ...>
...
<topology sockets='1' cores='2', threads='1'/>
</cpu>
is
-smp 2,sockets=1,cores=2,threads=1
This syntax was introduced in QEMU-0.12.
Version 2 changes:
- -smp argument build split into a separate function
- always add ",sockets=S,cores=C,threads=T" to -smp if qemu supports it
- use qemuParseCommandLineKeywords for command line parsing
Version 3 changes:
- ADD_ARG_LIT => ADD_ARG and line reordering in qemudBuildCommandLine
- rebased
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Current version expects name=value,... list and when an incorrect string
such as "a,b,c=d" would be parsed as "a,b,c" keyword with "d" value
without reporting any error, which is probably not the expected
behavior.
This patch adds an extra argument called allowEmptyValue, which if
non-zero will permit keywords with no value; "a,b=c,,d=" will be parsed
as follows:
keyword value
"a" NULL
"b" "c"
"" NULL
"d" ""
In case allowEmptyValue is zero, the string is required to contain
name=value pairs only; retvalues is guaranteed to contain non-NULL
pointers. Now, "a,b,c=d" will result in an error.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Replace
-balloon virtio
With
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
This allows it to get correct assigned PCI address as declared in
previous patch
* src/qemu/qemu_conf.c: Convert Virtio ballon to -device and
give it an explicit PCI address
* tests/qemuxml2argvdata/qemuxml2argv-*args: Add in virtio balloon
where appropriate
Instead of relying on QEMU to assign PCI addresses and then querying
them with 'info pci', manually assign all PCI addresses before starting
the guest. These addresses are not stable across reboots. That will
come in a later patch
NB, the PIIX3 (IDE, FDC, ISA-Bridge) will always have slot 1 and
VGA will always have slot 2. We declare the Virtio Balloon gets
slot 3, and then all remaining slots are for configured devices.
* src/qemu/qemu_conf.c: If -device is supported, then assign all PCI
addresses when building the command line
* src/qemu/qemu_driver.c: Don't query monitor for PCI addresses if
they have already been assigned
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-sound-device.args,
tests/qemuxml2argvdata/qemuxml2argv-watchdog-device.args: Update
to include PCI slot/bus information
QEMU always configures a VGA card. If no video card is included in
the libvirt XML, it is neccessary to explicitly turn off the default
using -vga none
* src/qemu/qemu_conf.c: Pass -vga none if no video card is configured
* tests/qemuargv2xmltest.c, tests/qemuxml2argvtest.c: Test for
handling -vga none.
* tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.args,
tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.xml: Test
data files
Not all QEMU builds default to SDL graphics for their display.
Newer QEMU now has an explicit -sdl flag, which we can use to
explicitly request SDL intead of relying on the default. This
protects libvirt against unexpected changes in graphics default
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Probe for -sdl
flag and use it if it is found
* tests/qemuhelptest.c: Add SDL flag to tests
The old syntax was
-chardev SOMECONFIG
-nic user,guestfwd=tcp:IP:PORT-chardev:CHARDEV
The new syntax is
-chardev SOMECONFIG
-netdev user,guestfwd=tcp:IP:PORT,chardev=ID,id=user-ID
The old syntax was
-usbdevice host:PRODUCT:VENDOR
Or
-usbdevice host:BUS.DEV
The new syntax is
-device usb-host,product=PRODUCT,vendor=VENDOR
Or
-device usb-host,hostbus=BUS,hostaddr=DEV
The previous syntax was severely limited in its options
-usbdevice disk:/home/berrange/output.img
The new syntax is the same as for other disk types
-drive file=/home/berrange/output.img,if=none,id=usb-1,index=1
-device usb-storage,drive=usb-1
Again, the index= arg is wrong here, and will be removed in a
later merge
The current syntax uses a pair of args
-net nic,macaddr=52:54:00:56:6c:55,vlan=3,model=pcnet,name=pcnet.0
-net user,vlan=3,name=user.0
The new syntax does not need the vlan craziness anymore, and
so has a simplified pair of args
-netdev user,id=user.0
-device pcnet,netdev=user.0,id=pcnet.0,mac=52:54:00:56:6c:55,addr=<PCI SLOT>
The current preferred syntax for disk drives uses
-drive file=/vms/plain.qcow,if=virtio,index=0,boot=on,format=qcow
The new syntax splits this up into a pair of linked args
-drive file=/vms/plain.qcow,if=none,id=drive-virtio-0,format=qcow2
-device virtio-blk-pci,drive=drive-virtio-0,id=virtio-0,addr=<PCI SLOT>
SCSI/IDE devices also get a bus property linking them to the
controller
-device scsi-disk,drive=drive-scsi0-0-0,id=scsi0-0-0,bus=scsi0.0,scsi-id=0
-device ide-drive,drive=drive-ide0-0-0,id=ide0-0-0,bus=ide0,unit=0
The current syntax for audio devices is a horrible multiplexed
arg
-soundhw sb16,pcspk,ac97
The new syntax is
-device sb16,id=sound0
or
-device AC97,id=sound1,addr=<PCI SLOT>
NB, pcspk still uses the old -soundhw syntax
The current character device syntax uses either
-serial tty,path=/dev/ttyS2
Or
-chardev tty,id=serial0,path=/dev/ttyS2 -serial chardev:serial0
With the new -device support, we now prefer
-chardev file,id=serial0,path=/tmp/serial.log -device isa-serial,chardev=serial0
This patch changes the existing -chardev syntax to use this new
scheme, and fallbacks to the old plain -serial syntax for old
QEMU.
The monitor device changes to
-chardev socket,id=monitor,path=/tmp/test-monitor,server,nowait -mon chardev=monitor
In addition, this patch adds --nodefaults, which kills off the
default serial, parallel, vga and nic devices. THis avoids the
need for us to explicitly turn each off
When starting a guest, give every device a unique alias. This will
be used for the 'id' parameter in -device args in later patches.
It can also be used to uniquely identify devices in the monitor
For old QEMU without -device, assign disk names based on QEMU's
historical naming scheme.
* src/qemu/qemu_conf.c: Assign unique device aliases
* src/qemu/qemu_driver.c: Remove obsolete qemudDiskDeviceName
and use the device alias in eject & blockstats commands
Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases
* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU
This patch introduces the support for giving all devices a short,
unique name, henceforth known as a 'device alias'. These aliases
are not set by the end user, instead being assigned by the hypervisor
if it decides it want to support this concept.
The QEMU driver sets them whenever using the -device arg syntax
and uses them for improved hotplug/hotunplug. it is the intent
that other APIs (block / interface stats & device hotplug) be
able to accept device alias names in the future.
The XML syntax is
<alias name="video0"/>
This may appear in any type of device that supports device info.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a 'alias'
field to virDomainDeviceInfo struct & parse/format it in XML
* src/libvirt_private.syms: Export virDomainDefClearDeviceAliases
* src/qemu/qemu_conf.c: Replace use of "nic_name" field with the
standard device alias
* src/qemu/qemu_driver.c: Clear device aliases at shutdown
The PCI device addresses are only valid while the VM is running,
since they are auto-assigned by QEMU. After shutdown they must
all be cleared. Future QEMU driver enhancement will allow for
persistent PCI address assignment
* src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms
Add virDomainDefClearPCIAddresses() method for wiping out auto assigned
PCI addresses
* src/qemu/qemu_driver.c: Clear PCI addresses at VM shutdown
Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
method for populating disk controllers, and call it after
parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
data to all data files which don't have it already
Hotunplug of devices requires that we know their PCI address. Even
hotplug of SCSI drives, required that we know the PCI address of
the SCSI controller to attach the drive to. We can find this out
by running 'info pci' and then correlating the vendor/product IDs
with the devices we booted with.
Although this approach is somewhat fragile, it is the only viable
option with QEMU < 0.12, since there is no way for libvirto set
explicit PCI addresses when creating devices in the first place.
For QEMU > 0.12, this code will not be used.
* src/qemu/qemu_driver.c: Assign all dynamic PCI addresses on
startup of QEMU VM, matching vendor/product IDs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
API for fetching PCI device address mapping
The current SCSI hotplug support attaches a brand new SCSI controller
for every disk. This is broken because the semantics differ from those
used when starting the VM initially. In the latter case, each SCSI
controller is filled before a new one is added.
If the user specifies an high drive index (sdazz) then at initial
startup, many intermediate SCSI controllers may be added with no
drives.
This patch changes SCSI hotplug so that it exactly matches the
behaviour of initial startup. First the SCSI controller number is
determined for the drive to be hotplugged. If any controller upto
and including that controller number is not yet present, it is
attached. Then finally the drive is attached to the last controller.
NB, this breaks SCSI hotunplug, because there is no 'drive_del'
command in current QEMU. Previous SCSI hotunplug was broken in
any case because it was unplugging the entire controller, not
just the drive in question.
A future QEMU will allow proper SCSI hotunplug of a drive.
This patch is derived from work done by Wolfgang Mauerer on disk
controllers.
* src/qemu/qemu_driver.c: Fix SCSI hotplug to add a drive to
the correct controller, instead of just attaching a new
controller.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
support for 'drive_add' command
This patch allows for explicit hotplug/unplug of SCSI controllers.
Ordinarily this is not required, since QEMU/libvirt will attach
a new SCSI controller whenever one is required. Allowing explicit
hotplug of controllers though, enables the caller to specify a
static PCI address, instead of auto-assigning the next available
PCI slot. Or it will when we have static PCI addressing.
This patch is derived from Wolfgang Mauerer's disk controller
patch series.
* src/qemu/qemu_driver.c: Support hotplug & unplug of SCSI
controllers
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
new API for attaching PCI SCSI controllers
qemudFindCharDevicePTYsMonitor reports an error if 'info chardev' didn't
provide information for a requested device, even if the log output parsing
had found the pty path for that device. This makes pty assignment fail for
older QEMU/KVM versions. For example KVM 72 on Debian doesn't support
'info chardev', so qemuMonitorTextGetPtyPaths cannot parse any useful
information and the hash for device-id-to-pty-path mapping stays empty.
Make qemudFindCharDevicePTYsMonitor report an error only if the log output
parsing and the 'info chardev' parsing failed to provide the pty path.
The current code for using -drive simply sets the -drive 'index'
parameter. QEMU internally converts this to bus/unit depending
on the type of drive. This does not give us precise control over
the bus/unit assignment though. This change switches over to make
libvirt explicitly calculate the bus/unit number.
In addition bus/unit/index are actually irrelevant for VirtIO
disks, since each virtio disk is a separate PCI device. No disk
controller is involved.
Doing the conversion to bus/unit in libvirt allows us to correctly
attach SCSI controllers when required.
* src/qemu/qemu_conf.c: Specify bus/unit instead of index for
disks
* tests/qemuxml2argvdata/qemuxml2argv-disk*.args: Switch over from
using index=NNNN, to bus=NN, unit=NN for SCSI/IDE/Floppy disks
To enable it to be called from multiple locations, split out
the code for building the -drive arg string. This will be needed
by later patches which do drive hotplug, the conversion to use
-device, and the conversion to controller/bus/unit addressing
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuBuildDriveStr
for building -drive arg string
Convert the QEMU monitor APIs over to use virDomainDeviceAddress
structs for passing addresses in/out, instead of individual bits.
This makes the number of parameters smaller & easier to deal with.
No functional change
* src/qemu/qemu_driver.c, src/qemu/qemu_monitor.c,
src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_text.c,
src/qemu/qemu_monitor_text.h: Change monitor hotplug APIs to
take an explicit address ptr for all host/guest addresses
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
to all XML files
All guest devices now use a common device address structure
summarized by:
enum virDomainDeviceAddressType {
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE,
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI,
};
struct _virDomainDevicePCIAddress {
unsigned int domain;
unsigned int bus;
unsigned int slot;
unsigned int function;
};
struct _virDomainDeviceInfo {
int type;
union {
virDomainDevicePCIAddress pci;
} addr;
};
This replaces the anonymous structs in Disk/Net/Hostdev data
structures. Where available, the address is *always* printed
in the XML file, instead of being hidden in the internal state
file.
<address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/>
The structure definition is based on Wolfgang Mauerer's disk
controller patch series.
* docs/schemas/domain.rng: Define the <address> syntax and
associate it with disk/net/hostdev devices
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: APIs for parsing/formatting address
information. Also remove the QEMU specific 'pci_addr' attributes
* src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with
new standardized format.
Based off how QEMU does it, look through /sys/bus/usb/devices/* for
matching vendor:product info, and if found, use info from the surrounding
files to build the device's /dev/bus/usb path.
This fixes USB device assignment by vendor:product when running qemu
as non-root (well, it should, but for some reason I couldn't reproduce
the failure people are seeing in [1], but it appears to work properly)
[1] https://bugzilla.redhat.com/show_bug.cgi?id=542450
qemudWaitForMonitor calls qemudReadLogOutput with qemudFindCharDevicePTYs
as callback. qemudFindCharDevicePTYs calls qemudExtractTTYPath to assign
a string to chr->data.file.path. Afterwards qemudWaitForMonitor may call
qemudFindCharDevicePTYsMonitor that overwrites chr->data.file.path without
freeing the old value. This results in leaking the memory allocated by
qemudExtractTTYPath.
Report an OOM error if the strdup in qemudFindCharDevicePTYsMonitor fails.
The -mem-prealloc flag should be used when using large pages
This ensures qemu tries to allocate all required memory immediately,
rather than when first used. The latter mode will crash qemu
if hugepages aren't available when accessed, while the former
should gracefully fallback to non-hugepages.
* src/qemu/qemu_conf.c: add -mem-prealloc flag to qemu command line
when using large pages
The behavior for the qemu balloon device has changed. Formerly, a virtio
balloon device was provided by default. Now, '-balloon virtio' must be
specified on the command line to enable it. This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection
This change makes the 'info chardev' parser ignore any trailing
whitespace on a line. This fixes a specific problem handling a '\r\n'
line ending.
* src/qemu/qemu_monitor_text.c: Ignore trailing whitespace in
'info chardev' output.
* src/qemu/qemu_driver.c (qemudDomainMigratePrepare2): Remove useless
test of always-non-NULL uri_out parameter. Use ATTRIBUTE_NONNULL to
inform tools.
* src/qemu/qemu_conf.h: Remove QEMU_CMD_FLAG_0_12 and just leave
the lone JSON flag
* src/qemu/qemu_conf.c: Enable JSON on QEMU 0.13 or later, but
leave it disabled for now
The XML XPath for detecting JSON in the running VM statefile was
wrong causing all VMs to get JSON mode enabled at libvirtd restart.
In addition if a VM was running a JSON enabled QEMU once, and then
altered to point to a non-JSON enabled QEMU later the 'monJSON'
flag would not get reset to 0.
* src/qemu/qemu_driver.c: Fix setting/detection of JSON mode
Support for memory statistics reporting is accepted for qemu inclusion.
Statistics are reported via the monitor command 'info balloon' as a comma
seprated list:
(qemu) info balloon
balloon: actual=1024,mem_swapped_in=0,mem_swapped_out=0,major_page_faults=88,minor_page_faults=105535,free_mem=1017065472,total_mem=1045229568
Libvirt, qemu, and the guest operating system may support a subset of the
statistics defined by the virtio spec. Thus, only statistics recognized by
components will be reported.
* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement the
new entry point by using info balloon monitor command
Set up the types for the domainMemoryStats function and insert it into the
virDriver structure definition. Because of static initializers, update
every driver and set the new field to NULL.
* include/libvirt/libvirt.h.in: new API
* src/driver.h src/*/*_driver.c src/vbox/vbox_tmpl.c: add the new
entry to the driver structure
* python/generator.py: fix compiler errors, the actual python binding is
implemented later
* src/driver.h: add an extra entry point in the structure
* src/esx/esx_driver.c src/lxc/lxc_driver.c src/opennebula/one_driver.c
src/openvz/openvz_driver.c src/phyp/phyp_driver.c src/qemu/qemu_driver.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/vbox/vbox_tmpl.c src/xen/xen_driver.c: add NULL entry points for
all drivers
* src/qemu/qemu_driver.c (doNonTunnelMigrate): Don't let a
NULL "uri_out" provoke a NULL-dereference in doNativeMigrate:
supply omitted goto-after-qemudReportError.
* src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Upon an
out of memory error, we would end up with unixfile==NULL and attempt
to unlink(NULL). Skip the unlink when it's NULL.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Set
"event" to NULL after qemuDomainEventQueue frees it, so a
subsequent free (after endjob label) upon qemuMonitorStartCPUs
failure does not cause a double free.
If there are no references remaining to the object, vm is set to NULL
and vm->persistent cannot be accessed. Fixed by this trivial patch.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Avoid possible
NULL pointer dereference on --crash dump.
This is trivial for QEMU since you just have to not stop the vm before
starting the dump. And for Xen, you just pass the flag down to xend.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): Add VIR_DUMP_LIVE.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Support live dumping.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support live dumping.
* tools/virsh.c (opts_dump): Add --live. (cmdDump): Map it to VIR_DUMP_LIVE.
This patch adds the --crash option (already present in "xm dump-core")
to "virsh dump". virDomainCoreDump already has a flags argument, so
the API/ABI is untouched.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): New flag for
CoreDump
* src/test/test_driver.c (testDomainCoreDump): Do not crash
after dump unless VIR_DUMP_CRASH is given.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Shutdown the domain
instead of restarting it if --crash is passed.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support --crash.
* tools/virsh.c (opts_dump): Add --crash.
(cmdDump): Map it to flags for virDomainCoreDump and pass them.
1) qemuMigrateToCommand uses ">>" so we have to truncate the file
before starting the migration;
2) the command wasn't updated to chown the driver and set/restore
the security lavels;
3) the VM does not have to be resumed if migration fails;
4) the file is not removed when migration fails.
* src/qemu/qemu_driver.c (qemuDomainCoreDump): Truncate file before
dumping, set/restore ownership and security labels for the file.
Those were pointed by DanB in his review but not yet fixed
* src/qemu/qemu_driver.c: qemudWaitForMonitor() use EnterMonitorWithDriver()
and ExitMonitorWithDriver() there
* src/qemu/qemu_monitor_text.c: checking fro strdu failure and hash
table add error in qemuMonitorTextGetPtyPaths()
This change makes the QEMU driver get pty paths from the output of the
monitor 'info chardev' command. This output is structured, and contains
both the name of the device and the path on the same line. This is
considerably more reliable than parsing the startup log output, which
requires the parsing code to know which order QEMU will print pty
information in.
Note that we still need to parse the log output as the monitor itself
may be on a pty. This should be rare, however, and the new code will
replace all pty paths parsed by the log output method once the monitor
is available.
* src/qemu/qemu_monitor.(c|h) src/qemu_monitor_text.(c|h): Implement
qemuMonitorGetPtyPaths().
* src/qemu/qemu_driver.c: Get pty path information using
qemuMonitorGetPtyPaths().
Change -monitor, -serial and -parallel output to use -chardev if it is
available.
* src/qemu/qemu_conf.c: Update qemudBuildCommandLine to use -chardev where
available.
* tests/qemuxml2argvtest.c tests/qemuxml2argvdata/: Add -chardev equivalents
for all current serial and parallel tests.
Even if qemudStartVMDaemon suceeds, an error was logged such as
'qemuRemoveCgroup:1778 : internal error Unable to find cgroup for'.
This is because qemudStartVMDaemon calls qemuRemoveCgroup to
ensure that old cgroup does not remain. This workaround makes
sense but leaving an error message may confuse users.
* src/qemu/qemu_driver.c: a an option to the function to suppress the
error being logged
This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.
* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.
This makes a small change on the failed-migration path. Up to now,
all VMs that failed non-live migration after the "stop" command
were restarted. This must not be done when the VM was paused in
the first place.
* src/qemu/qemu_driver.c (qemudDomainMigratePerform): Do not restart
a paused VM that fails migration. Set paused state after "stop",
reset it after failure.
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
The QEMU 0.10.0 release (and possibly other 0.10.x) has a bug where
it sometimes/often forgets to display the initial monitor greeting
line, soley printing a (qemu). This in turn confuses the text
console parsing because it has a '(qemu)' it is not expecting. The
confusion results in a negative malloc. Bad things follow.
This re-writes the text console handling to be more robust. The key
idea is that it should only look for a (qemu), once it has seen the
original command echo'd back. This ensures it'll skip the bogus stray
(qemu) with broken QEMUs.
* src/qemu/qemu_monitor.c: Add some (disabled) debug code
* src/qemu/qemu_monitor_text.c: Re-write way command replies
are detected
Since the monitor I/O is processed out of band from the main
thread(s) invoking monitor commands, the virDomainObj may be
deleted by the I/O thread. The qemuDomainObjBeginJob takes an
extra reference to protect against final deletion, but this
reference is released by the corresponding EndJob call. THus
after the EndJob call it may not be valid to reference the
virDomainObj any more. To allow callers to detect this, the
EndJob call is changed to return the remaining reference count.
* src/conf/domain_conf.c: Make virDomainObjUnref return the
remaining reference count
* src/qemu/qemu_driver.c: Avoid referencing virDomainObjPtr
after qemuDomainObjEndJob if it has been deleted.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add callbacks
for reset, shutdown, poweroff and stop events. Add convenience
methods for emiting those events
With addition of events there will be alot of callbacks.
To avoid having to add many APIs to register callbacks,
provide them all at once in a big table
* src/qemu/qemu_driver.c: Pass in a callback table to QEMU
monitor code
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h Replace
the EOF and disk secret callbacks with a callback table
Initial support for the new QEMU monitor protocol using JSON
as the data encoding format instead of plain text
* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
Now that drivers are using a private domain object state blob,
the virDomainObjFormat/Parse methods are no longer able to
directly serialize all neccessary state to/from XML. It is
thus neccessary to introduce a pair of callbacks fo serializing
private state.
The code for serializing vCPU PIDs and the monitor device
config can now move out of domain_conf.c and into the
qemu_driver.c where they belong.
* src/conf/capabilities.h: Add callbacks for serializing private
state to/from XML
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the
monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids
fields from virDomainObjPtr. Remove code that serialized
those fields
* src/libvirt_private.syms: Export virXPathBoolean
* src/qemu/qemu_driver.c: Add callbacks for serializing monitor
and vcpupid data to/from XML
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor
char device config into qemuMonitorOpen directly.
The code to start CPUs executing has nothing todo with CPU
affinity masks, so pull it out of the qemudInitCpuAffinity()
method and up into qemudStartVMDaemon()
* src/qemu/qemu_driver.c: Pull code to start CPUs executing out
of qemudInitCpuAffinity()
The current QEMU disk media change does not support setting the
disk format. The new JSON monitor will support this, so add an
extra parameter to pass this info in
* src/qemu/qemu_driver.c: Pass in disk format when changing media
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Add a 'format' arg to qemuMonitorChangeMedia()
The qemuMonitorEscape() method, and the VIR_ENUM for migration
status will be needed by the JSON monitor too, so move that code
into the shared qemu_monitor.c file instead of qemu_monitor_text.c
* src/qemu/qemu_monitor.h: Declare qemuMonitorMigrationStatus enum
and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor.c: Implement qemuMonitorMigrationStatus enum
and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor_text.c: Remove above methods/enum
If QEMU shuts down while we're in the middle of processing a
monitor command, the monitor will be freed, and upon cleaning
up we attempt to do qemuMonitorUnlock(priv->mon) when priv->mon
is NULL.
To address this we introduce proper reference counting into
the qemuMonitorPtr object, and hold an extra reference whenever
executing a command.
* src/qemu/qemu_driver.c: Hold a reference on the monitor while
executing commands, and only NULL-ify the priv->mon field when
the last reference is released
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add reference
counting to handle safe deletion of monitor objects
* src/conf/domain_conf.c: don't call virDomainObjUnlock twice
* src/qemu/qemu_driver.c: relock driver lock if an error occurs in
qemuDomainObjBeginJobWithDriver, enter/exit monitor with driver
in qemudDomainSave
Introduce a new type="dir" mode for <disks> that allows use of
QEMU's virtual FAT block device driver. eg
<disk type='dir' device='floppy'>
<source dir='/tmp/test'/>
<target dev='fda' bus='fdc'/>
<readonly/>
</disk>
gets turned into
-drive file=fat:floppy:/tmp/test,if=floppy,index=0
Only read-only disks are supported with virtual FAT mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
disk args
* src/security/security_selinux.c: Temporarily skip labelling
of directory based disks
* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
and virProcessInfoGetAffinity to internal drivers
Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.
* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
and qemu-kvm-0.11.0-rc2 regression tests
The qemudStartVMDaemon() and several functions it calls use
the QEMU monitor. The QEMU driver is locked while this function
is executing, so it is rquired to release the driver lock and
reacquire it either side of issuing a monitor command. It
failed todo so, leading to deadlock
* qemu/qemu_driver.c: Release driver when in qemudStartVMDaemon
and things it calls
The QEMU monitor open method would not take a reference on
the virDomainObjPtr until it had successfully opened the
monitor. The cleanup code upon failure to open though would
call qemuMonitorClose() which would in turn decrement the
reference count. This caused the virDoaminObjPtr to be mistakenly
freed and then the whole driver crashes
* src/qemu/qemu_monitor.c: Fix reference counting in
qemuMonitorOpen
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
* src/conf/domain_conf.h src/conf/domain_conf.c: add the new entry in
the enum and lists of virDomainDiskBus
* src/qemu/qemu_conf.c: same for virDomainDiskQEMUBus
When running qemu:///system instance, libvirtd runs as root,
but QEMU may optionally be configured to run non-root. When
then saving a guest to a state file, the file is initially
created as root, and thus QEMU cannot write to it. It is also
missing labelling required to allow access via SELinux.
* src/qemu/qemu_driver.c: Set ownership on save image before
running migrate command in virDomainSave impl. Call out to
security driver to set save image labelling
* src/security/security_driver.h: Add driver APIs for setting
and restoring saved state file labelling
* src/security/security_selinux.c: Implement saved state file
labelling for SELinux
Introduce a number of new APIs to expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.
* virDomainIsActive: Checking virDomainGetID is not reliable
since it is not possible to distinguish between error condition
and inactive domain for ID of -1.
* virDomainIsPersistent: Check whether a persistent config exists
for the domain
* virNetworkIsActive: Check whether the network is active
* virNetworkIsPersistent: Check whether a persistent config exists
for the network
* virStoragePoolIsActive: Check whether the storage pool is active
* virStoragePoolIsPersistent: Check whether a persistent config exists
for the storage pool
* virInterfaceIsActive: Check whether the host interface is active
* virConnectIsSecure: whether the communication channel to the
hypervisor is secure
* virConnectIsEncrypted: whether any network based commnunication
channels are encrypted
NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.
* include/libvirt/libvirt.h.in: Define public API
* src/driver.h: Define internal driver API
* src/libvirt.c: Implement public API entry point
* src/libvirt_public.syms: Export API symbols
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/interface/netcf_driver.c, src/network/bridge_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out driver tables
* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c
src/lxc/lxc_controller.c src/node_device/node_device_hal.c
src/openvz/openvz_conf.c src/qemu/qemu_driver.c
src/qemu/qemu_monitor_text.c src/remote/remote_driver.c
src/storage/storage_backend_disk.c src/storage/storage_driver.c
src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c
src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code
review and those are the fixes correcting the problems
Some monitor commands may take a very long time to complete. It is
not desirable to block other incoming API calls forever. With this
change, if an existing API call is holding the job lock, additional
API calls will not wait forever. They will time out after a short
period of time, allowing application to retry later.
* include/libvirt/virterror.h, src/util/virterror.c: Add new
VIR_ERR_OPERATION_TIMEOUT error code
* src/qemu/qemu_driver.c: Change to a timed condition variable
wait for acquiring the monitor job lock
QEMU monitor commands may sleep for a prolonged period of time.
If the virDomainObjPtr or qemu driver lock is held this will
needlessly block execution of many other API calls. it also
prevents asynchronous monitor events from being dispatched
while a monitor command is executing, because deadlock will
ensure.
To resolve this, it is neccessary to release all locks while
executing a monitor command. This change introduces a flag
indicating that a monitor job is active, and a condition
variable to synchronize access to this flag. This ensures that
only a single thread can be making a state change or executing
a monitor command at a time, while still allowing other API
calls to be completed without blocking
* src/qemu/qemu_driver.c: Release driver and domain lock when
running monitor commands. Re-add locking to disk passphrase
callback
* src/qemu/THREADS.txt: Document threading rules
Change the QEMU monitor file handle watch to poll for both
read & write events, as well as EOF. All I/O to/from the
QEMU monitor FD is now done in the event callback thread.
When the QEMU driver needs to send a command, it puts the
data to be sent into a qemuMonitorMessagePtr object instance,
queues it for dispatch, and then goes to sleep on a condition
variable. The event thread sends all the data, and then waits
for the reply to arrive, putting the response / error data
back into the qemuMonitorMessagePtr and notifying the condition
variable.
There is a temporary hack in the disk passphrase callback to
avoid acquiring the domain lock. This avoids a deadlock in
the command processing, since the domain lock is still held
when running monitor commands. The next commit will remove
the locking when running commands & thus allow re-introduction
of locking the disk passphrase callback
* src/qemu/qemu_driver.c: Temporarily don't acquire lock in
disk passphrase callback. To be reverted in next commit
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Remove
raw I/O functions, and a generic qemuMonitorSend() for
invoking a command
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Remove all low level I/O, and use the new qemuMonitorSend()
API. Provide a qemuMonitorTextIOProcess() method for detecting
command/reply/prompt boundaries in the monitor data stream
In preparation of the monitor I/O process becoming fully asynchronous,
it is neccessary to ensure all access to internals of the qemuMonitorPtr
object is protected by a mutex lock.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add mutex for locking
monitor.
* src/qemu/qemu_driver.c: Add locking around all monitor commands
Change the QEMU driver to not directly invoke the text mode monitor
APIs. Instead add a generic wrapper layer, which will eventually
invoke either the text or JSON protocol code as needed. Pass an
qemuMonitorPtr object into the monitor APIs instead of virDomainObjPtr
to complete the de-coupling of the monitor impl from virDomainObj
data structures
* src/qemu/qemu_conf.h: Remove qemuDomainObjPrivate definition
* src/qemu/qemu_driver.c: Add qemuDomainObjPrivate definition.
Pass qemuMonitorPtr into all monitor APIs instead of the
virDomainObjPtr instance.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add thin
wrappers for all qemuMonitorXXX command APIs, calling into
qemu_monitor_text.c/h
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Rename qemuMonitor -> qemuMonitorText & update to accept
qemuMonitorPtr instead of virDomainObjPtr
Decouple the monitor code from the virDomainDefPtr structure
by moving the disk encryption lookup code back into the
qemu_driver.c file. Instead provide a function callback to
the monitor code which can be invoked to retrieve encryption
data as required.
* src/qemu/qemu_driver.c: Add findDomainDiskEncryption,
and findVolumeQcowPassphrase. Pass address of the method
findVolumeQcowPassphrase into qemuMonitorOpen()
* src/qemu/qemu_monitor.c: Associate a disk
encryption function callback with the qemuMonitorPtr
object.
* src/qemu/qemu_monitor_text.c: Remove findDomainDiskEncryption
and findVolumeQcowPassphrase.
Introduce a new qemuDomainObjPrivate object which is used to store
the private QEMU specific data associated with each virDomainObjPtr
instance. This contains a single member, an instance of the new
qemuMonitorPtr object which encapsulates the QEMU monitor state.
The internals of the latter are private to the qemu_monitor* files,
not to be shown to qemu_driver.c
* src/qemu/qemu_conf.h: Definition of qemuDomainObjPrivate.
* src/qemu/qemu_driver.c: Register a functions for creating
and freeing qemuDomainObjPrivate instances with the domain
capabilities. Remove the qemudDispatchVMEvent() watch since
I/O watches are now handled by the monitor code itself. Pass
a new qemuHandleMonitorEOF() callback into qemuMonitorOpen
to allow notification when the monitor quits.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Introduce
the 'qemuMonitor' object. Temporarily add new APIs
qemuMonitorWrite, qemuMonitorRead, qemuMonitorWaitForInput
to allow text based monitor impl to perform I/O.
* src/qemu/qemu_monitor_text.c: Call APIs for reading/writing
to monitor instead of accessing the file handle directly.
The qemu_driver.c code should not contain any code that interacts
with the QEMU monitor at a low level. A previous commit moved all
the command invocations out. This change moves out the code which
actually opens the monitor device.
* src/qemu/qemu_driver.c: Remove qemudOpenMonitor & methods called
from it.
* src/Makefile.am: Add qemu_monitor.{c,h}
* src/qemu/qemu_monitor.h: Add qemuMonitorOpen()
* src/qemu/qemu_monitor.c: All code for opening the monitor
* src/util/pci.c, src/util/pci.h: Make the pciDeviceList struct
opaque to callers of the API. Add accessor methods for managing
devices in the list
* src/qemu/qemu_driver.c: Update to use APIs instead of directly
accessing pciDeviceList fields
As it was basically unimplemented and more confusing than useful
at the moment.
* src/libvirt_private.syms: remove from internal symbols list
* src/qemu/qemu_bridge_filter.c src/util/ebtables.c: remove code and
one use of the unimplemented function
allows the following to be specified in a domain:
<channel type='pipe'>
<source path='/tmp/guestfwd'/>
<target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>
* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
schemas and the parsing/serialization side for the new construct
QEmu support will add the following on the qemu command line:
-chardev pipe,id=channel0,path=/tmp/guestfwd
-net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0
* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
A character device's target (it's interface in the guest) had only a
single property: port. This patch is in preparation for adding targets
which require other properties.
Since this changes the conf type for character devices this affects
a number of drivers:
* src/conf/domain_conf.[ch] src/esx/esx_vmx.c src/qemu/qemu_conf.c
src/qemu/qemu_driver.c src/uml/uml_conf.c src/uml/uml_driver.c
src/vbox/vbox_tmpl.c src/xen/xend_internal.c src/xen/xm_internal.c:
target properties are moved into a union in virDomainChrDef, and a
targetType field is added to identify which union member should be
used. All current code which touches a virDomainChrDef is updated both
to use the new union field, and to populate targetType if necessary.
* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module
- Don't duplicate SystemError
- Use proper error code in domain_conf
- Fix a broken error call in qemu_conf
- Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)
All drivers have copy + pasted inadequate error reporting which wraps
util.c:virGetHostname. Move all error reporting to this function, and improve
what we report.
Changes from v1:
Drop the driver wrappers around virGetHostname. This means we still need
to keep the new conn argument to virGetHostname, but I think it's worth
it.
introduced on commit 9231aa7d95
* src/qemu/qemu_driver.c: in qemudRemoveDomainStatus fix a reference
to an undefined variable buf and free up an allocated string
When building with --disable-nls, I got a few messages like this:
storage/storage_backend.c: In function 'virStorageBackendCreateQemuImg':
storage/storage_backend.c:571: warning: format not a string literal and no format arguments
Fix these up.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
qemudShutdownVMDaemon() calls qemudRemoveDomainStatus(), which
then calls virFileDeletePID(). qemudShutdownVMDaemon() then
unnecessarily calls virFileDeletePID() again. Remove this second
usage of it, and also slightly refactor qemudRemoveDomainStatus()
to VIR_WARN appropriate error messages.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The LXC driver was mistakenly returning -1 for lxcStartup()
in scenarios that are not an error. This caused the libvirtd
to quit for unprivileged users. This fixes the return code
of LXC driver, and also adds a "name" field to the virStateDriver
struct and logging to make it easier to find these problems
in the future
* src/driver.h: Add a 'name' field to state driver to allow
easy identification during failures
* src/libvirt.c: Log name of failed driver for virStateInit
failures
* src/lxc/lxc_driver.c: Don't return a failure code for
lxcStartup() if LXC is not available on this host, simply
disable the driver.
* src/network/bridge_driver.c, src/node_device/node_device_devkit.c,
src/node_device/node_device_hal.c, src/opennebula/one_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/secret/secret_driver.c, src/storage/storage_driver.c,
src/uml/uml_driver.c, src/xen/xen_driver.c: Fill in name
field in virStateDriver struct
Rename virDomainIsActive to virDomainObjIsActive, and
virInterfaceIsActive to virInterfaceObjIsActive and finally
virNetworkIsActive to virNetworkObjIsActive.
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/interface_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/lxc/lxc_driver.c,
src/network/bridge_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c: Update for
renamed APIs.
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this
* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
The virDomainObjPtr object stores state about a running domain.
This object is shared across all drivers so it is not appropriate
to include driver specific state here. This patch adds the ability
to request a blob of private data per domain object instance. The
driver must provide a allocator & deallocator for this purpose
THis patch abuses the virCapabilitiesPtr structure for storing the
allocator/deallocator callbacks, since it is already being abused
for other internal things relating to parsing. This should be moved
out into a separate object at some point.
* src/conf/capabilities.h: Add privateDataAllocFunc and
privateDataFreeFunc fields
* src/conf/domain_conf.c: Invoke the driver allocators / deallocators
when creating/freeing virDomainObjPtr instances.
* src/conf/domain_conf.h: Pass virCapsPtr into virDomainAssignDef
to allow access to the driver specific allocator function
* src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c: Update for
change in virDomainAssignDef contract
The current virDomainObjListPtr object stores domain objects in
an array. This means that to find a particular objects requires
O(n) time, and more critically acquiring O(n) mutex locks.
The new impl replaces the array with a virHashTable, keyed off
UUID. Finding a object based on UUID is now O(1) time, and only
requires a single mutex lock. Finding by name/id is unchanged
in complexity.
In changing this, all code which iterates over the array had
to be updated to use a hash table iterator function callback.
Several of the functions which were identically duplicating
across all drivers were pulled into domain_conf.c
* src/conf/domain_conf.h, src/conf/domain_conf.c: Change
virDomainObjListPtr to use virHashTable. Add a initializer
method virDomainObjListInit, and rename virDomainObjListFree
to virDomainObjListDeinit, since its not actually freeing
the container, only its contents. Also add some convenient
methods virDomainObjListGetInactiveNames,
virDomainObjListGetActiveIDs and virDomainObjListNumOfDomains
which can be used to implement the correspondingly named
public API entry points in drivers
* src/libvirt_private.syms: Export new methods from domain_conf.h
* src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_conf.c, src/openvz/openvz_driver.c,
src/qemu/qemu_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c: Update all code
to deal with hash tables instead of arrays for domains
If the the qemu and kvm binaries are the same, we don't include machine
types in the kvm domain info.
However, the code which refreshes the machine types info from the
previous capabilities structure first looks at the kvm domain's info,
finds it matches and then copies the empty machine types list over
for the top-level qemu domain.
That doesn't make sense, we shouldn't copy an empty machin types list.
* src/qemu/qemu_conf.c: qemudGetOldMachinesFromInfo(): don't copy an
empty machine types list.
Normally, when you migrate a domain from host A to host B,
the domain on host A remains defined but shutoff and the domain
on host B remains running but is a "transient". Add a new
flag to virDomainMigrate() to allow the original domain to be
undefined on source host A, and a new flag to virDomainMigrate() to
allow the new domain to be persisted on the destination host B.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The logic for running the decompression programs was broken in
commit f238709304, so that for
non-raw formats the decompression program was never run, and
for raw formats, it tried to exec an argv[] with initial NULL
in the program name.
* src/qemu/qemu_driver.c: Fix logic in runing decompression program
Introduces several new public API options for migration
- VIR_MIGRATE_PEER2PEER: With this flag the client only
invokes the virDomainMigratePerform method, expecting
the source host driver to do whatever is required to
complete the entire migration process.
- VIR_MIGRATE_TUNNELLED: With this flag the actual data
for migration will be tunnelled over the libvirtd RPC
channel. This requires that VIR_MIGRATE_PEER2PEER is
also set.
- virDomainMigrateToURI: This is variant of the existing
virDomainMigrate method which does not require any
virConnectPtr for the destination host. Given suitable
driver support, this allows for all the same modes as
virDomainMigrate()
The URI for VIR_MIGRATE_PEER2PEER must be a valid libvirt
URI. For non-p2p migration a hypervisor specific migration
URI is used.
virDomainMigrateToURI without a PEER2PEER flag is only
support for Xen currently, and it involves XenD talking
directly to XenD, no libvirtd involved at all.
* include/libvirt/libvirt.h.in: Add VIR_MIGRATE_PEER2PEER
flag for migration
* src/libvirt_internal.h: Add feature flags for peer to
peer migration (VIR_FEATURE_MIGRATE_P2P) and direct
migration (VIR_MIGRATE_PEER2PEER mode)
* src/libvirt.c: Implement support for VIR_MIGRATE_PEER2PEER
and virDomainMigrateToURI APIs.
* src/xen/xen_driver.c: Advertise support for DIRECT migration
* src/xen/xend_internal.c: Add TODO item for p2p migration
* src/libvirt_public.syms: Export virDomainMigrateToURI
method
* src/qemu/qemu_driver.c: Add support for PEER2PEER and
migration, and adapt TUNNELLED migration.
* tools/virsh.c: Add --p2p and --direct args and use the
new virDomainMigrateToURI method where possible.
Re-arrange the doTunnelMigrate method putting all non-QEMU local
state setup steps first. This maximises chances of success before
then starting destination QEMU for receiving incoming migration.
Altogether this can reduce the number of goto cleanup labels to
something more managable.
* qemu/qemu_driver.c: Re-order steps in doTunnelMigrate
Simplify the doTunnelMigrate code by pulling out the code for
sending all tunnelled data into separate helper
* qemu/qemu_driver.c: introduce doTunnelSendAll() method
Simplify the doTunnelMigrate() method by pulling out the code
which opens/closes the virConnectPtr object into a parent
method
* qemu/qemu_driver.c: Add doPeer2PeerMigrate which then calls
doTunnelMigrate with dconn & dom_xml
virStreamAbort is needed when the caller wishes to terminate
the stream early, not when virStreamSend fails.
* qemu/qemu_driver.c: Fix calling of virStreamAbort during
tunnelled migration
The code for tunnelled migration was added in a dedicated method,
but the native migration code is still inline in the top level
qemudDomainMigratePerform() API. Move the native code out into
a dedicated method too to make things more maintainable.
* src/qemu/qemu_driver.c: Pull code for performing a native
QEMU migration out into separate method
Since virMigratePrepareTunnel() is used for migration over the
native libvirt connection, there is never any need to pass the
target URI to this method.
* daemon/remote.c, src/driver.h, src/libvirt.c, src/libvirt_internal.h,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/remote/remote_protocol.c, src/remote/remote_protocol.h,
src/remote/remote_protocol.x: Remove 'uri_in' parameter from
virMigratePrepareTunnel() method
When James Morris originally submitted his sVirt patches (as seen in
libvirt 0.6.1), he did not require on disk labelling for
virSecurityDomainRestoreImageLabel. A later commit[2] changed this
behavior to assume on disk labelling, which halts implementations for
path-based MAC systems such as AppArmor and TOMOYO where
vm->def->seclabel is required to obtain the label.
* src/security/security_driver.h src/qemu/qemu_driver.c
src/security/security_selinux.c: adds the 'virDomainObjPtr vm'
argument back to *RestoreImageLabel
Fix migration, broken in two different ways by the QEMU monitor
abstraction. Note that the QEMU console emits a "\r\n" as the
line-ending.
* src/qemu/qemu_monitor_text.c (qemuMonitorGetMigrationStatus):
Fix "info migrate" command and its output's parsing.
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The upcoming tunnelled migration needs to be able to set
a migration in progress in the background, as well as
be able to cancel a migration when a problem has happened.
This patch allows for both of these to properly work.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When using VNC for graphics + keyboard + mouse, we shouldn't
then use the host OS for audio. Audio should go back over
VNC.
When using SDL for graphics, we should use the host OS for
audio since that's where the display is. We need to allow
certain QEMU env variables to be passed through to guest
too to allow choice of QEMU audio backend.
* qemud/libvirtd.sysconf: Mention QEMU/SDL audio env vars
* src/qemu_conf.c: Passthrough QEMU/SDL audio env for SDL display,
disable host audio for VNC display
* src/qemu/qemu_monitor_text.c: Always print command and reply
in qemuMonitorCommandWithHandler. Print all args in each monitor
command API & remove redundant relpy printing
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new
qemuMonitorRemoveHostNetwork() command for removing host
networks
* src/qemu/qemu_driver.c: Convert NIC hotplug methods over
to use qemuMonitorRemoveHostNetwork()
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Remove prefix arg
from qemuBuildHostNetStr which is no longer required
* src/qemu/qemu_driver.c: Refactor to use qemuMonitorAddHostNetwork()
API for adding host network
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddHostNetwork() method for adding host networks
* src/qemu/qemu_conf.c: Remove separator from qemuBuildNicStr()
args, and remove hardcoded 'nic' prefix. Leave it upto callers
instead
* src/qemu/qemu_driver.c: Switch over to using the new
qemuMonitorAddPCINetwork() method for NIC hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddPCINetwork API for PCI network device hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
APIs for processing file handles
* src/qemu/qemu_driver.c: Convert NIC hotplug method over to
use qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
API qemuMonitorAddPCIDisk()
* src/qemu/qemu_driver.c: Convert over to using the new
qemuMonitorAddPCIDisk() method, and remove now obsolete
qemudEscape() method
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API
qemuMonitorRemovePCIDevice() for removing PCI device
* src/qemu/qemu_driver.c: Convert all places removing PCI devices
over to new qemuMonitorRemovePCIDevice() API
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
API qemuMonitorAddPCIHostDevice()
* src/qemu/qemu_driver.c: Switch to using qemuMonitorAddPCIHostDevice()
for PCI host device hotplug
One API adds an exact device based on bus+dev, the other adds
any device matching vendor+product
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()
commands.
* src/qemu/qemu_driver.c: Switch over to using the new
qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddUSBDisk() API
* src/qemu/qemu_driver.c: Switch USB disk hotplug to the new
src/qemu/qemu_driver.c API.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorMigrateToCommand() API
* src/qemu/qemu_driver.c: Switch over to using the
qemuMonitorMigrateToCommand() API for core dumps and save
to file APIs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API
qemuMonitorMigrateToHost() for doing TCP migration
* src/qemu/qemu_driver.c: Convert to use qemuMonitorMigrateToHost().
Also handle proper URIs (tcp:// as well as tcp:)
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorGetMigrationStatus() command.
* src/qemu/qemu_driver.c: Use new qemuMonitorGetMigrationStatus()
command to check completion status.
* src/qemu/qemu_driver.c: Use new qemuMonitorSetMigrationSpeed()
API during migration
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new
qemuMonitorSetMigrationSpeed() API
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new
qemuMonitorGetBlockStatsInfo() command
* src/qemu/qemu_driver.c: Remove directly use of blockstats in
favour of calling qemuMonitorGetBlockStatsInfo()
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new APIs
qemuMonitorSaveVirtualMemory() and qemuMonitorSavePhysicalMemory()
* src/qemu/qemu_driver.c: Use the new qemuMonitorSaveVirtualMemory()
and qemuMonitorSavePhysicalMemory() APIs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new APis
qemuMonitorChangeMedia and qemuMonitorEjectMedia. Pull in code
for qemudEscape
* src/qemu/qemu_driver.c: Remove code that directly issues 'eject'
and 'change' commands in favour of API calls.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorSetBalloon() based on existing code in
qemudDomainSetMemoryBalloon
* src/qemu/qemu_driver.c: Remove use of qemudDomainSetMemoryBalloon()
in favour of qemuMonitorSetBalloon(). Fix error code when balloon
is not supported
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Pull old
qemudDomainGetMemoryBalloon() code into a new method called
qemuMonitorGetBalloonInfo()
* src/qemu/qemu_driver.c: Update to call qemuMonitorGetBalloonInfo()
and remove qemudDomainGetMemoryBalloon().
* src/qemu/qemu_driver.c: Remove use of 'system_powerdown'
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new
qemuMonitorSystemPowerdown() api call
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new
qemuMonitorStopCPUs() API
* src/qemu/qemu_driver.c: Replace direct monitor commands for 'stop'
with qemuMonitorStopCPUs()
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Rename
Rename qemudMonitorSendCont to qemuMonitorStartCPUs
* src/qemu/qemu_driver.c: Update callers for new name
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a
new qemuMonitorSetVNCPassword() API
* src/qemu/qemu_driver.c: Refactor qemudInitPasswords to
call qemuMonitorSetVNCPassword()
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new
qemuMonitorGetCPUInfo() command
* src/qemu/qemu_driver.c: Refactor qemudDetectVcpuPIDs to
use qemuMonitorGetCPUInfo()
Pull out all the QEMU monitor interaction code to a separate
file. This will make life easier when we need to drop in a
new implementation for the forthcoming QMP machine friendly
monitor support.
Next step is to add formal APIs for each monitor command,
and remove direct commands for sending/receiving generic
data.
* src/Makefile.am: Add qemu_monitor.c to build
* src/qemu/qemu_driver.c: Remove code for monitor interaction
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: New
file for monitor interaction
* po/POTFILES.in: Add src/qemu/qemu_monitor_text.c
Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string. If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL. Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string. This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen
* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
-domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
-boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params
* daemon/default-network.xml: Move to src/network/default.xml
* daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move
to src/qemu/
* src/qemu.conf: Move to src/qemu/qemu.conf
* daemon/Makefile.am: Remove rules for default-nmetwork.xml and
libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in
uninstall-local that would install polkit again.
* src/Makefile.am: Add rules for installing network/default.xml
and the qemu/*.aug files. Add test case for QEMU augeas files.
Add uninstall-local rule for files/directories created during
install. Rename install-exec-local to install-data-local.
Only install qemu.conf if WITH_QEMU is set.
* tests/networkschematest: Update for XML location move
